Loading...
1# SPDX-License-Identifier: GPL-2.0
2#
3# USB Serial device configuration
4#
5
6menuconfig USB_SERIAL
7 tristate "USB Serial Converter support"
8 depends on TTY
9 help
10 Say Y here if you have a USB device that provides normal serial
11 ports, or acts like a serial device, and you want to connect it to
12 your USB bus.
13
14 Please read <file:Documentation/usb/usb-serial.rst> for more
15 information on the specifics of the different devices that are
16 supported, and on how to use them.
17
18 To compile this driver as a module, choose M here: the
19 module will be called usbserial.
20
21if USB_SERIAL
22
23config USB_SERIAL_CONSOLE
24 bool "USB Serial Console device support"
25 depends on USB_SERIAL=y
26 help
27 If you say Y here, it will be possible to use a USB to serial
28 converter port as the system console (the system console is the
29 device which receives all kernel messages and warnings and which
30 allows logins in single user mode). This could be useful if some
31 terminal or printer is connected to that serial port.
32
33 Even if you say Y here, the currently visible virtual console
34 (/dev/tty0) will still be used as the system console by default, but
35 you can alter that using a kernel command line option such as
36 "console=ttyUSB0". (Try "man bootparam" or see the documentation of
37 your boot loader (lilo or loadlin) about how to pass options to the
38 kernel at boot time.)
39
40 If you don't have a VGA card installed and you say Y here, the
41 kernel will automatically use the first USB to serial converter
42 port, /dev/ttyUSB0, as system console.
43
44 If unsure, say N.
45
46config USB_SERIAL_GENERIC
47 bool "USB Generic Serial Driver"
48 help
49 Say Y here if you want to use the generic USB serial driver. Please
50 read <file:Documentation/usb/usb-serial.rst> for more information on
51 using this driver. It is recommended that the "USB Serial converter
52 support" be compiled as a module for this driver to be used
53 properly.
54
55config USB_SERIAL_SIMPLE
56 tristate "USB Serial Simple Driver"
57 help
58 Say Y here to use the USB serial "simple" driver. This driver
59 handles a wide range of very simple devices, all in one
60 driver. Specifically, it supports:
61 - Suunto ANT+ USB device.
62 - Medtronic CareLink USB device
63 - Fundamental Software dongle.
64 - Google USB serial devices
65 - HP4x calculators
66 - Libtransistor USB console
67 - a number of Motorola phones
68 - Motorola Tetra devices
69 - Novatel Wireless GPS receivers
70 - Siemens USB/MPI adapter.
71 - ViVOtech ViVOpay USB device.
72 - Infineon Modem Flashloader USB interface
73 - ZIO Motherboard USB serial interface
74
75 To compile this driver as a module, choose M here: the module
76 will be called usb-serial-simple.
77
78config USB_SERIAL_AIRCABLE
79 tristate "USB AIRcable Bluetooth Dongle Driver"
80 help
81 Say Y here if you want to use USB AIRcable Bluetooth Dongle.
82
83 To compile this driver as a module, choose M here: the module
84 will be called aircable.
85
86config USB_SERIAL_ARK3116
87 tristate "USB ARK Micro 3116 USB Serial Driver"
88 help
89 Say Y here if you want to use a ARK Micro 3116 USB to Serial
90 device.
91
92 To compile this driver as a module, choose M here: the
93 module will be called ark3116
94
95config USB_SERIAL_BELKIN
96 tristate "USB Belkin and Peracom Single Port Serial Driver"
97 help
98 Say Y here if you want to use a Belkin USB Serial single port
99 adaptor (F5U103 is one of the model numbers) or the Peracom single
100 port USB to serial adapter.
101
102 To compile this driver as a module, choose M here: the
103 module will be called belkin_sa.
104
105config USB_SERIAL_CH341
106 tristate "USB Winchiphead CH341 Single Port Serial Driver"
107 help
108 Say Y here if you want to use a Winchiphead CH341 single port
109 USB to serial adapter.
110
111 To compile this driver as a module, choose M here: the
112 module will be called ch341.
113
114config USB_SERIAL_WHITEHEAT
115 tristate "USB ConnectTech WhiteHEAT Serial Driver"
116 select USB_EZUSB_FX2
117 help
118 Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
119 USB to serial converter device.
120
121 To compile this driver as a module, choose M here: the
122 module will be called whiteheat.
123
124config USB_SERIAL_DIGI_ACCELEPORT
125 tristate "USB Digi International AccelePort USB Serial Driver"
126 help
127 Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
128 2 port (plus parallel port) and 4 port USB serial converters. The
129 parallel port on the USB 2 appears as a third serial port on Linux.
130 The Digi Acceleport USB 8 is not yet supported by this driver.
131
132 To compile this driver as a module, choose M here: the
133 module will be called digi_acceleport.
134
135config USB_SERIAL_CP210X
136 tristate "USB CP210x family of UART Bridge Controllers"
137 help
138 Say Y here if you want to use a CP2101/CP2102/CP2103 based USB
139 to RS232 converters.
140
141 To compile this driver as a module, choose M here: the
142 module will be called cp210x.
143
144config USB_SERIAL_CYPRESS_M8
145 tristate "USB Cypress M8 USB Serial Driver"
146 help
147 Say Y here if you want to use a device that contains the Cypress
148 USB to Serial microcontroller, such as the DeLorme Earthmate GPS.
149
150 Attempted SMP support... send bug reports!
151
152 Supported microcontrollers in the CY4601 family are:
153 CY7C63741 CY7C63742 CY7C63743 CY7C64013
154
155 To compile this driver as a module, choose M here: the
156 module will be called cypress_m8.
157
158config USB_SERIAL_EMPEG
159 tristate "USB Empeg empeg-car Mark I/II Driver"
160 help
161 Say Y here if you want to connect to your Empeg empeg-car Mark I/II
162 mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...}
163 device node. See <file:Documentation/usb/usb-serial.rst> for more
164 tidbits of information.
165
166 To compile this driver as a module, choose M here: the
167 module will be called empeg.
168
169config USB_SERIAL_FTDI_SIO
170 tristate "USB FTDI Single Port Serial Driver"
171 help
172 Say Y here if you want to use a FTDI SIO single port USB to serial
173 converter device. The implementation I have is called the USC-1000.
174 This driver has also been tested with the 245 and 232 devices.
175
176 See <http://ftdi-usb-sio.sourceforge.net/> for more
177 information on this driver and the device.
178
179 To compile this driver as a module, choose M here: the
180 module will be called ftdi_sio.
181
182config USB_SERIAL_VISOR
183 tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
184 help
185 Say Y here if you want to connect to your HandSpring Visor, Palm
186 m500 or m505 through its USB docking station. See
187 <http://usbvisor.sourceforge.net/index.php3> for more information on using this
188 driver.
189
190 To compile this driver as a module, choose M here: the
191 module will be called visor.
192
193config USB_SERIAL_IPAQ
194 tristate "USB PocketPC PDA Driver"
195 help
196 Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
197 or any other PDA running Windows CE 3.0 or PocketPC 2002
198 using a USB cradle/cable. For information on using the driver,
199 read <file:Documentation/usb/usb-serial.rst>.
200
201 To compile this driver as a module, choose M here: the
202 module will be called ipaq.
203
204config USB_SERIAL_IR
205 tristate "USB IR Dongle Serial Driver"
206 help
207 Say Y here if you want to enable simple serial support for USB IrDA
208 devices. This is useful if you do not want to use the full IrDA
209 stack.
210
211 To compile this driver as a module, choose M here: the
212 module will be called ir-usb.
213
214config USB_SERIAL_EDGEPORT
215 tristate "USB Inside Out Edgeport Serial Driver"
216 help
217 Say Y here if you want to use any of the following devices from
218 Inside Out Networks (Digi):
219 Edgeport/4
220 Rapidport/4
221 Edgeport/4t
222 Edgeport/2
223 Edgeport/4i
224 Edgeport/2i
225 Edgeport/421
226 Edgeport/21
227 Edgeport/8
228 Edgeport/8 Dual
229 Edgeport/2D8
230 Edgeport/4D8
231 Edgeport/8i
232 Edgeport/2 DIN
233 Edgeport/4 DIN
234 Edgeport/16 Dual
235
236 To compile this driver as a module, choose M here: the
237 module will be called io_edgeport.
238
239config USB_SERIAL_EDGEPORT_TI
240 tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
241 help
242 Say Y here if you want to use any of the devices from Inside Out
243 Networks (Digi) that are not supported by the io_edgeport driver.
244 This includes the Edgeport/1 device.
245
246 To compile this driver as a module, choose M here: the
247 module will be called io_ti.
248
249config USB_SERIAL_F81232
250 tristate "USB Fintek F81232 Single Port Serial Driver"
251 help
252 Say Y here if you want to use the Fintek F81232 single
253 port usb to serial adapter.
254
255 To compile this driver as a module, choose M here: the
256 module will be called f81232.
257
258config USB_SERIAL_F8153X
259 tristate "USB Fintek F81532/534 Multi-Ports Serial Driver"
260 help
261 Say Y here if you want to use the Fintek F81532/534 Multi-Ports
262 USB to serial adapter.
263
264 To compile this driver as a module, choose M here: the
265 module will be called f81534.
266
267
268config USB_SERIAL_GARMIN
269 tristate "USB Garmin GPS driver"
270 help
271 Say Y here if you want to connect to your Garmin GPS.
272 Should work with most Garmin GPS devices which have a native USB port.
273
274 See <http://sourceforge.net/projects/garmin-gps> for the latest
275 version of the driver.
276
277 To compile this driver as a module, choose M here: the
278 module will be called garmin_gps.
279
280config USB_SERIAL_IPW
281 tristate "USB IPWireless (3G UMTS TDD) Driver"
282 select USB_SERIAL_WWAN
283 help
284 Say Y here if you want to use a IPWireless USB modem such as
285 the ones supplied by Axity3G/Sentech South Africa.
286
287 To compile this driver as a module, choose M here: the
288 module will be called ipw.
289
290config USB_SERIAL_IUU
291 tristate "USB Infinity USB Unlimited Phoenix Driver"
292 help
293 Say Y here if you want to use a IUU in phoenix mode and get
294 an extra ttyUSBx device. More information available on
295 http://eczema.ecze.com/iuu_phoenix.html
296
297 To compile this driver as a module, choose M here: the
298 module will be called iuu_phoenix.o
299
300config USB_SERIAL_KEYSPAN_PDA
301 tristate "USB Keyspan PDA Single Port Serial Driver"
302 select USB_EZUSB_FX2
303 help
304 Say Y here if you want to use a Keyspan PDA single port USB to
305 serial converter device. This driver makes use of firmware
306 developed from scratch by Brian Warner.
307
308 To compile this driver as a module, choose M here: the
309 module will be called keyspan_pda.
310
311config USB_SERIAL_KEYSPAN
312 tristate "USB Keyspan USA-xxx Serial Driver"
313 select USB_EZUSB_FX2
314 help
315 Say Y here if you want to use Keyspan USB to serial converter
316 devices. This driver makes use of Keyspan's official firmware
317 and was developed with their support. You must also include
318 firmware to support your particular device(s).
319
320 See <http://blemings.org/hugh/keyspan.html> for more information.
321
322 To compile this driver as a module, choose M here: the
323 module will be called keyspan.
324
325config USB_SERIAL_KLSI
326 tristate "USB KL5KUSB105 (Palmconnect) Driver"
327 help
328 Say Y here if you want to use a KL5KUSB105 - based single port
329 serial adapter. The most widely known -- and currently the only
330 tested -- device in this category is the PalmConnect USB Serial
331 adapter sold by Palm Inc. for use with their Palm III and Palm V
332 series PDAs.
333
334 Please read <file:Documentation/usb/usb-serial.rst> for more
335 information.
336
337 To compile this driver as a module, choose M here: the
338 module will be called kl5kusb105.
339
340config USB_SERIAL_KOBIL_SCT
341 tristate "USB KOBIL chipcard reader"
342 help
343 Say Y here if you want to use one of the following KOBIL USB chipcard
344 readers:
345
346 - USB TWIN
347 - KAAN Standard Plus
348 - KAAN SIM
349 - SecOVID Reader Plus
350 - B1 Professional
351 - KAAN Professional
352
353 Note that you need a current CT-API.
354 To compile this driver as a module, choose M here: the
355 module will be called kobil_sct.
356
357config USB_SERIAL_MCT_U232
358 tristate "USB MCT Single Port Serial Driver"
359 help
360 Say Y here if you want to use a USB Serial single port adapter from
361 Magic Control Technology Corp. (U232 is one of the model numbers).
362
363 This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
364 BAY, Belkin F5U109, and Belkin F5U409 devices.
365
366 To compile this driver as a module, choose M here: the
367 module will be called mct_u232.
368
369config USB_SERIAL_METRO
370 tristate "USB Metrologic Instruments USB-POS Barcode Scanner Driver"
371 help
372 Say Y here if you want to use a USB POS Metrologic barcode scanner.
373
374 To compile this driver as a module, choose M here: the
375 module will be called metro-usb.
376
377config USB_SERIAL_MOS7720
378 tristate "USB Moschip 7720 Serial Driver"
379 help
380 Say Y here if you want to use USB Serial single and double
381 port adapters from Moschip Semiconductor Tech.
382
383 To compile this driver as a module, choose M here: the
384 module will be called mos7720.
385
386config USB_SERIAL_MOS7715_PARPORT
387 bool "Support for parallel port on the Moschip 7715"
388 depends on USB_SERIAL_MOS7720
389 depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720
390 select PARPORT_NOT_PC
391 help
392 Say Y if you have a Moschip 7715 device and would like to use
393 the parallel port it provides. The port will register with
394 the parport subsystem as a low-level driver.
395
396config USB_SERIAL_MOS7840
397 tristate "USB Moschip 7840/7820 USB Serial Driver"
398 help
399 Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820
400 Dual-Serial port device from MosChip Semiconductor.
401
402 The MCS7840 and MCS7820 have been developed to connect a wide range
403 of standard serial devices to a USB host. The MCS7840 has a USB
404 device controller connected to four (4) individual UARTs while the
405 MCS7820 controller connects to two (2) individual UARTs.
406
407 To compile this driver as a module, choose M here: the
408 module will be called mos7840. If unsure, choose N.
409
410config USB_SERIAL_MXUPORT
411 tristate "USB Moxa UPORT Serial Driver"
412 help
413 Say Y here if you want to use a MOXA UPort Serial hub.
414
415 This driver supports:
416
417 [2 Port]
418 - UPort 1250 : 2 Port RS-232/422/485 USB to Serial Hub
419 - UPort 1250I : 2 Port RS-232/422/485 USB to Serial Hub with
420 Isolation
421
422 [4 Port]
423 - UPort 1410 : 4 Port RS-232 USB to Serial Hub
424 - UPort 1450 : 4 Port RS-232/422/485 USB to Serial Hub
425 - UPort 1450I : 4 Port RS-232/422/485 USB to Serial Hub with
426 Isolation
427
428 [8 Port]
429 - UPort 1610-8 : 8 Port RS-232 USB to Serial Hub
430 - UPort 1650-8 : 8 Port RS-232/422/485 USB to Serial Hub
431
432 [16 Port]
433 - UPort 1610-16 : 16 Port RS-232 USB to Serial Hub
434 - UPort 1650-16 : 16 Port RS-232/422/485 USB to Serial Hub
435
436 To compile this driver as a module, choose M here: the
437 module will be called mxuport.
438
439config USB_SERIAL_NAVMAN
440 tristate "USB Navman GPS device"
441 help
442 To compile this driver as a module, choose M here: the
443 module will be called navman.
444
445config USB_SERIAL_PL2303
446 tristate "USB Prolific 2303 Single Port Serial Driver"
447 help
448 Say Y here if you want to use the PL2303 USB Serial single port
449 adapter from Prolific.
450
451 To compile this driver as a module, choose M here: the
452 module will be called pl2303.
453
454config USB_SERIAL_OTI6858
455 tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller"
456 help
457 Say Y here if you want to use the OTi-6858 single port USB to serial
458 converter device.
459
460 To compile this driver as a module, choose M here: the
461 module will be called oti6858.
462
463config USB_SERIAL_QCAUX
464 tristate "USB Qualcomm Auxiliary Serial Port Driver"
465 help
466 Say Y here if you want to use the auxiliary serial ports provided
467 by many modems based on Qualcomm chipsets. These ports often use
468 a proprietary protocol called DM and cannot be used for AT- or
469 PPP-based communication.
470
471 To compile this driver as a module, choose M here: the
472 module will be called qcaux. If unsure, choose N.
473
474config USB_SERIAL_QUALCOMM
475 tristate "USB Qualcomm Serial modem"
476 select USB_SERIAL_WWAN
477 help
478 Say Y here if you have a Qualcomm USB modem device. These are
479 usually wireless cellular modems.
480
481 To compile this driver as a module, choose M here: the
482 module will be called qcserial.
483
484config USB_SERIAL_SPCP8X5
485 tristate "USB SPCP8x5 USB To Serial Driver"
486 help
487 Say Y here if you want to use the spcp8x5 converter chip. This is
488 commonly found in some Z-Wave USB devices.
489
490 To compile this driver as a module, choose M here: the
491 module will be called spcp8x5.
492
493config USB_SERIAL_SAFE
494 tristate "USB Safe Serial (Encapsulated) Driver"
495
496config USB_SERIAL_SAFE_PADDED
497 bool "USB Secure Encapsulated Driver - Padded"
498 depends on USB_SERIAL_SAFE
499
500config USB_SERIAL_SIERRAWIRELESS
501 tristate "USB Sierra Wireless Driver"
502 help
503 Say M here if you want to use Sierra Wireless devices.
504
505 Many devices have a feature known as TRU-Install. For those devices
506 to work properly, the USB Storage Sierra feature must be enabled.
507
508 To compile this driver as a module, choose M here: the
509 module will be called sierra.
510
511config USB_SERIAL_SYMBOL
512 tristate "USB Symbol Barcode driver (serial mode)"
513 help
514 Say Y here if you want to use a Symbol USB Barcode device
515 in serial emulation mode.
516
517 To compile this driver as a module, choose M here: the
518 module will be called symbolserial.
519
520config USB_SERIAL_TI
521 tristate "USB TI 3410/5052 Serial Driver"
522 help
523 Say Y here if you want to use the TI USB 3410 or 5052
524 serial devices.
525
526 To compile this driver as a module, choose M here: the
527 module will be called ti_usb_3410_5052.
528
529config USB_SERIAL_CYBERJACK
530 tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader"
531 help
532 Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
533 reader. This is an interface to ISO 7816 compatible contact-based
534 chipcards, e.g. GSM SIMs.
535
536 To compile this driver as a module, choose M here: the
537 module will be called cyberjack.
538
539 If unsure, say N.
540
541config USB_SERIAL_XIRCOM
542 tristate "USB Xircom / Entrega Single Port Serial Driver"
543 select USB_EZUSB_FX2
544 help
545 Say Y here if you want to use a Xircom or Entrega single port USB to
546 serial converter device. This driver makes use of firmware
547 developed from scratch by Brian Warner.
548
549 To compile this driver as a module, choose M here: the
550 module will be called keyspan_pda.
551
552config USB_SERIAL_WWAN
553 tristate
554
555config USB_SERIAL_OPTION
556 tristate "USB driver for GSM and CDMA modems"
557 select USB_SERIAL_WWAN
558 help
559 Say Y here if you have a GSM or CDMA modem that's connected to USB.
560
561 This driver also supports several PCMCIA cards which have a
562 built-in OHCI-USB adapter and an internally-connected GSM modem.
563 The USB bus on these cards is not accessible externally.
564
565 Supported devices include (some of?) those made by:
566 Option, Huawei, Audiovox, Novatel Wireless, or Anydata.
567
568 To compile this driver as a module, choose M here: the
569 module will be called option.
570
571 If this driver doesn't recognize your device,
572 it might be accessible via the FTDI_SIO driver.
573
574config USB_SERIAL_OMNINET
575 tristate "USB ZyXEL omni.net LCD Plus Driver"
576 help
577 Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
578
579 To compile this driver as a module, choose M here: the
580 module will be called omninet.
581
582config USB_SERIAL_OPTICON
583 tristate "USB Opticon Barcode driver (serial mode)"
584 help
585 Say Y here if you want to use a Opticon USB Barcode device
586 in serial emulation mode.
587
588 To compile this driver as a module, choose M here: the
589 module will be called opticon.
590
591config USB_SERIAL_XSENS_MT
592 tristate "Xsens motion tracker serial interface driver"
593 help
594 Say Y here if you want to use Xsens motion trackers.
595
596 This driver supports the new generation of motion trackers
597 by Xsens. Older devices can be accessed using the FTDI_SIO
598 driver.
599
600 To compile this driver as a module, choose M here: the
601 module will be called xsens_mt.
602
603config USB_SERIAL_WISHBONE
604 tristate "USB-Wishbone adapter interface driver"
605 help
606 Say Y here if you want to use a USB attached Wishbone bus.
607
608 Wishbone is an open hardware SoC bus commonly used in FPGA
609 designs. Bus access can be serialized using the Etherbone
610 protocol <http://www.ohwr.org/projects/etherbone-core>.
611
612 This driver is intended to be used with devices which attach
613 their internal Wishbone bus to a USB serial interface using
614 the Etherbone protocol. A userspace library is required to
615 speak the protocol made available by this driver as ttyUSBx.
616
617 To compile this driver as a module, choose M here: the
618 module will be called wishbone-serial.
619
620config USB_SERIAL_SSU100
621 tristate "USB Quatech SSU-100 Single Port Serial Driver"
622 help
623 Say Y here if you want to use the Quatech SSU-100 single
624 port usb to serial adapter.
625
626 To compile this driver as a module, choose M here: the
627 module will be called ssu100.
628
629config USB_SERIAL_QT2
630 tristate "USB Quatech Serial Driver for USB 2 devices"
631 help
632 Say Y here if you want to use the Quatech USB 2
633 serial adapters.
634
635 To compile this driver as a module, choose M here: the
636 module will be called quatech-serial.
637
638config USB_SERIAL_UPD78F0730
639 tristate "USB Renesas uPD78F0730 Single Port Serial Driver"
640 help
641 Say Y here if you want to use the Renesas uPD78F0730
642 serial driver.
643
644 To compile this driver as a module, choose M here: the
645 module will be called upd78f0730.
646
647config USB_SERIAL_DEBUG
648 tristate "USB Debugging Device"
649 help
650 Say Y here if you have a USB debugging device used to receive
651 debugging data from another machine. The most common of these
652 devices is the NetChip TurboCONNECT device.
653
654 To compile this driver as a module, choose M here: the
655 module will be called usb-debug.
656
657endif # USB_SERIAL
1#
2# USB Serial device configuration
3#
4
5menuconfig USB_SERIAL
6 tristate "USB Serial Converter support"
7 depends on USB
8 ---help---
9 Say Y here if you have a USB device that provides normal serial
10 ports, or acts like a serial device, and you want to connect it to
11 your USB bus.
12
13 Please read <file:Documentation/usb/usb-serial.txt> for more
14 information on the specifics of the different devices that are
15 supported, and on how to use them.
16
17 To compile this driver as a module, choose M here: the
18 module will be called usbserial.
19
20if USB_SERIAL
21
22config USB_SERIAL_CONSOLE
23 bool "USB Serial Console device support"
24 depends on USB_SERIAL=y
25 ---help---
26 If you say Y here, it will be possible to use a USB to serial
27 converter port as the system console (the system console is the
28 device which receives all kernel messages and warnings and which
29 allows logins in single user mode). This could be useful if some
30 terminal or printer is connected to that serial port.
31
32 Even if you say Y here, the currently visible virtual console
33 (/dev/tty0) will still be used as the system console by default, but
34 you can alter that using a kernel command line option such as
35 "console=ttyUSB0". (Try "man bootparam" or see the documentation of
36 your boot loader (lilo or loadlin) about how to pass options to the
37 kernel at boot time.)
38
39 If you don't have a VGA card installed and you say Y here, the
40 kernel will automatically use the first USB to serial converter
41 port, /dev/ttyUSB0, as system console.
42
43 If unsure, say N.
44
45config USB_EZUSB
46 bool "Functions for loading firmware on EZUSB chips"
47 help
48 Say Y here if you need EZUSB device support.
49
50config USB_SERIAL_GENERIC
51 bool "USB Generic Serial Driver"
52 help
53 Say Y here if you want to use the generic USB serial driver. Please
54 read <file:Documentation/usb/usb-serial.txt> for more information on
55 using this driver. It is recommended that the "USB Serial converter
56 support" be compiled as a module for this driver to be used
57 properly.
58
59config USB_SERIAL_AIRCABLE
60 tristate "USB AIRcable Bluetooth Dongle Driver"
61 help
62 Say Y here if you want to use USB AIRcable Bluetooth Dongle.
63
64 To compile this driver as a module, choose M here: the module
65 will be called aircable.
66
67config USB_SERIAL_ARK3116
68 tristate "USB ARK Micro 3116 USB Serial Driver"
69 help
70 Say Y here if you want to use a ARK Micro 3116 USB to Serial
71 device.
72
73 To compile this driver as a module, choose M here: the
74 module will be called ark3116
75
76config USB_SERIAL_BELKIN
77 tristate "USB Belkin and Peracom Single Port Serial Driver"
78 help
79 Say Y here if you want to use a Belkin USB Serial single port
80 adaptor (F5U103 is one of the model numbers) or the Peracom single
81 port USB to serial adapter.
82
83 To compile this driver as a module, choose M here: the
84 module will be called belkin_sa.
85
86config USB_SERIAL_CH341
87 tristate "USB Winchiphead CH341 Single Port Serial Driver"
88 help
89 Say Y here if you want to use a Winchiphead CH341 single port
90 USB to serial adapter.
91
92 To compile this driver as a module, choose M here: the
93 module will be called ch341.
94
95config USB_SERIAL_WHITEHEAT
96 tristate "USB ConnectTech WhiteHEAT Serial Driver"
97 select USB_EZUSB
98 help
99 Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
100 USB to serial converter device.
101
102 To compile this driver as a module, choose M here: the
103 module will be called whiteheat.
104
105config USB_SERIAL_DIGI_ACCELEPORT
106 tristate "USB Digi International AccelePort USB Serial Driver"
107 ---help---
108 Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
109 2 port (plus parallel port) and 4 port USB serial converters. The
110 parallel port on the USB 2 appears as a third serial port on Linux.
111 The Digi Acceleport USB 8 is not yet supported by this driver.
112
113 This driver works under SMP with the usb-uhci driver. It does not
114 work under SMP with the uhci driver.
115
116 To compile this driver as a module, choose M here: the
117 module will be called digi_acceleport.
118
119config USB_SERIAL_CP210X
120 tristate "USB CP210x family of UART Bridge Controllers"
121 help
122 Say Y here if you want to use a CP2101/CP2102/CP2103 based USB
123 to RS232 converters.
124
125 To compile this driver as a module, choose M here: the
126 module will be called cp210x.
127
128config USB_SERIAL_CYPRESS_M8
129 tristate "USB Cypress M8 USB Serial Driver"
130 help
131 Say Y here if you want to use a device that contains the Cypress
132 USB to Serial microcontroller, such as the DeLorme Earthmate GPS.
133
134 Attempted SMP support... send bug reports!
135
136 Supported microcontrollers in the CY4601 family are:
137 CY7C63741 CY7C63742 CY7C63743 CY7C64013
138
139 To compile this driver as a module, choose M here: the
140 module will be called cypress_m8.
141
142config USB_SERIAL_EMPEG
143 tristate "USB Empeg empeg-car Mark I/II Driver"
144 help
145 Say Y here if you want to connect to your Empeg empeg-car Mark I/II
146 mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...}
147 device node. See <file:Documentation/usb/usb-serial.txt> for more
148 tidbits of information.
149
150 To compile this driver as a module, choose M here: the
151 module will be called empeg.
152
153config USB_SERIAL_FTDI_SIO
154 tristate "USB FTDI Single Port Serial Driver"
155 ---help---
156 Say Y here if you want to use a FTDI SIO single port USB to serial
157 converter device. The implementation I have is called the USC-1000.
158 This driver has also be tested with the 245 and 232 devices.
159
160 See <http://ftdi-usb-sio.sourceforge.net/> for more
161 information on this driver and the device.
162
163 To compile this driver as a module, choose M here: the
164 module will be called ftdi_sio.
165
166config USB_SERIAL_FUNSOFT
167 tristate "USB Fundamental Software Dongle Driver"
168 ---help---
169 Say Y here if you want to use the Fundamental Software dongle.
170
171 To compile this driver as a module, choose M here: the
172 module will be called funsoft.
173
174config USB_SERIAL_VISOR
175 tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
176 help
177 Say Y here if you want to connect to your HandSpring Visor, Palm
178 m500 or m505 through its USB docking station. See
179 <http://usbvisor.sourceforge.net/index.php3> for more information on using this
180 driver.
181
182 To compile this driver as a module, choose M here: the
183 module will be called visor.
184
185config USB_SERIAL_IPAQ
186 tristate "USB PocketPC PDA Driver"
187 help
188 Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
189 or any other PDA running Windows CE 3.0 or PocketPC 2002
190 using a USB cradle/cable. For information on using the driver,
191 read <file:Documentation/usb/usb-serial.txt>.
192
193 To compile this driver as a module, choose M here: the
194 module will be called ipaq.
195
196config USB_SERIAL_IR
197 tristate "USB IR Dongle Serial Driver"
198 help
199 Say Y here if you want to enable simple serial support for USB IrDA
200 devices. This is useful if you do not want to use the full IrDA
201 stack.
202
203 To compile this driver as a module, choose M here: the
204 module will be called ir-usb.
205
206config USB_SERIAL_EDGEPORT
207 tristate "USB Inside Out Edgeport Serial Driver"
208 ---help---
209 Say Y here if you want to use any of the following devices from
210 Inside Out Networks (Digi):
211 Edgeport/4
212 Rapidport/4
213 Edgeport/4t
214 Edgeport/2
215 Edgeport/4i
216 Edgeport/2i
217 Edgeport/421
218 Edgeport/21
219 Edgeport/8
220 Edgeport/8 Dual
221 Edgeport/2D8
222 Edgeport/4D8
223 Edgeport/8i
224 Edgeport/2 DIN
225 Edgeport/4 DIN
226 Edgeport/16 Dual
227
228 To compile this driver as a module, choose M here: the
229 module will be called io_edgeport.
230
231config USB_SERIAL_EDGEPORT_TI
232 tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
233 help
234 Say Y here if you want to use any of the devices from Inside Out
235 Networks (Digi) that are not supported by the io_edgeport driver.
236 This includes the Edgeport/1 device.
237
238 To compile this driver as a module, choose M here: the
239 module will be called io_ti.
240
241config USB_SERIAL_F81232
242 tristate "USB Fintek F81232 Single Port Serial Driver"
243 help
244 Say Y here if you want to use the Fintek F81232 single
245 port usb to serial adapter.
246
247 To compile this driver as a module, choose M here: the
248 module will be called f81232.
249
250config USB_SERIAL_GARMIN
251 tristate "USB Garmin GPS driver"
252 help
253 Say Y here if you want to connect to your Garmin GPS.
254 Should work with most Garmin GPS devices which have a native USB port.
255
256 See <http://sourceforge.net/projects/garmin-gps> for the latest
257 version of the driver.
258
259 To compile this driver as a module, choose M here: the
260 module will be called garmin_gps.
261
262config USB_SERIAL_IPW
263 tristate "USB IPWireless (3G UMTS TDD) Driver"
264 select USB_SERIAL_WWAN
265 help
266 Say Y here if you want to use a IPWireless USB modem such as
267 the ones supplied by Axity3G/Sentech South Africa.
268
269 To compile this driver as a module, choose M here: the
270 module will be called ipw.
271
272config USB_SERIAL_IUU
273 tristate "USB Infinity USB Unlimited Phoenix Driver"
274 help
275 Say Y here if you want to use a IUU in phoenix mode and get
276 an extra ttyUSBx device. More information available on
277 http://eczema.ecze.com/iuu_phoenix.html
278
279 To compile this driver as a module, choose M here: the
280 module will be called iuu_phoenix.o
281
282config USB_SERIAL_KEYSPAN_PDA
283 tristate "USB Keyspan PDA Single Port Serial Driver"
284 select USB_EZUSB
285 help
286 Say Y here if you want to use a Keyspan PDA single port USB to
287 serial converter device. This driver makes use of firmware
288 developed from scratch by Brian Warner.
289
290 To compile this driver as a module, choose M here: the
291 module will be called keyspan_pda.
292
293config USB_SERIAL_KEYSPAN
294 tristate "USB Keyspan USA-xxx Serial Driver"
295 select USB_EZUSB
296 ---help---
297 Say Y here if you want to use Keyspan USB to serial converter
298 devices. This driver makes use of Keyspan's official firmware
299 and was developed with their support. You must also include
300 firmware to support your particular device(s).
301
302 See <http://blemings.org/hugh/keyspan.html> for more information.
303
304 To compile this driver as a module, choose M here: the
305 module will be called keyspan.
306
307config USB_SERIAL_KEYSPAN_MPR
308 bool "USB Keyspan MPR Firmware"
309 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
310 help
311 Say Y here to include firmware for the Keyspan MPR converter.
312
313config USB_SERIAL_KEYSPAN_USA28
314 bool "USB Keyspan USA-28 Firmware"
315 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
316 help
317 Say Y here to include firmware for the USA-28 converter.
318
319config USB_SERIAL_KEYSPAN_USA28X
320 bool "USB Keyspan USA-28X Firmware"
321 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
322 help
323 Say Y here to include firmware for the USA-28X converter.
324 Be sure you have a USA-28X, there are also 28XA and 28XB
325 models, the label underneath has the actual part number.
326
327config USB_SERIAL_KEYSPAN_USA28XA
328 bool "USB Keyspan USA-28XA Firmware"
329 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
330 help
331 Say Y here to include firmware for the USA-28XA converter.
332 Be sure you have a USA-28XA, there are also 28X and 28XB
333 models, the label underneath has the actual part number.
334
335config USB_SERIAL_KEYSPAN_USA28XB
336 bool "USB Keyspan USA-28XB Firmware"
337 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
338 help
339 Say Y here to include firmware for the USA-28XB converter.
340 Be sure you have a USA-28XB, there are also 28X and 28XA
341 models, the label underneath has the actual part number.
342
343config USB_SERIAL_KEYSPAN_USA19
344 bool "USB Keyspan USA-19 Firmware"
345 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
346 help
347 Say Y here to include firmware for the USA-19 converter.
348
349config USB_SERIAL_KEYSPAN_USA18X
350 bool "USB Keyspan USA-18X Firmware"
351 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
352 help
353 Say Y here to include firmware for the USA-18X converter.
354
355config USB_SERIAL_KEYSPAN_USA19W
356 bool "USB Keyspan USA-19W Firmware"
357 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
358 help
359 Say Y here to include firmware for the USA-19W converter.
360
361config USB_SERIAL_KEYSPAN_USA19QW
362 bool "USB Keyspan USA-19QW Firmware"
363 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
364 help
365 Say Y here to include firmware for the USA-19QW converter.
366
367config USB_SERIAL_KEYSPAN_USA19QI
368 bool "USB Keyspan USA-19QI Firmware"
369 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
370 help
371 Say Y here to include firmware for the USA-19QI converter.
372
373config USB_SERIAL_KEYSPAN_USA49W
374 bool "USB Keyspan USA-49W Firmware"
375 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
376 help
377 Say Y here to include firmware for the USA-49W converter.
378
379config USB_SERIAL_KEYSPAN_USA49WLC
380 bool "USB Keyspan USA-49WLC Firmware"
381 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
382 help
383 Say Y here to include firmware for the USA-49WLC converter.
384
385config USB_SERIAL_KLSI
386 tristate "USB KL5KUSB105 (Palmconnect) Driver"
387 ---help---
388 Say Y here if you want to use a KL5KUSB105 - based single port
389 serial adapter. The most widely known -- and currently the only
390 tested -- device in this category is the PalmConnect USB Serial
391 adapter sold by Palm Inc. for use with their Palm III and Palm V
392 series PDAs.
393
394 Please read <file:Documentation/usb/usb-serial.txt> for more
395 information.
396
397 To compile this driver as a module, choose M here: the
398 module will be called kl5kusb105.
399
400config USB_SERIAL_KOBIL_SCT
401 tristate "USB KOBIL chipcard reader"
402 ---help---
403 Say Y here if you want to use one of the following KOBIL USB chipcard
404 readers:
405
406 - USB TWIN
407 - KAAN Standard Plus
408 - KAAN SIM
409 - SecOVID Reader Plus
410 - B1 Professional
411 - KAAN Professional
412
413 Note that you need a current CT-API.
414 To compile this driver as a module, choose M here: the
415 module will be called kobil_sct.
416
417config USB_SERIAL_MCT_U232
418 tristate "USB MCT Single Port Serial Driver"
419 ---help---
420 Say Y here if you want to use a USB Serial single port adapter from
421 Magic Control Technology Corp. (U232 is one of the model numbers).
422
423 This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
424 BAY, Belkin F5U109, and Belkin F5U409 devices.
425
426 To compile this driver as a module, choose M here: the
427 module will be called mct_u232.
428
429config USB_SERIAL_METRO
430 tristate "USB Metrologic Instruments USB-POS Barcode Scanner Driver"
431 ---help---
432 Say Y here if you want to use a USB POS Metrologic barcode scanner.
433
434 To compile this driver as a module, choose M here: the
435 module will be called metro-usb.
436
437config USB_SERIAL_MOS7720
438 tristate "USB Moschip 7720 Serial Driver"
439 ---help---
440 Say Y here if you want to use USB Serial single and double
441 port adapters from Moschip Semiconductor Tech.
442
443 To compile this driver as a module, choose M here: the
444 module will be called mos7720.
445
446config USB_SERIAL_MOS7715_PARPORT
447 bool "Support for parallel port on the Moschip 7715"
448 depends on USB_SERIAL_MOS7720
449 depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720
450 select PARPORT_NOT_PC
451 ---help---
452 Say Y if you have a Moschip 7715 device and would like to use
453 the parallel port it provides. The port will register with
454 the parport subsystem as a low-level driver.
455
456config USB_SERIAL_MOS7840
457 tristate "USB Moschip 7840/7820 USB Serial Driver"
458 ---help---
459 Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820
460 Dual-Serial port device from MosChip Semiconductor.
461
462 The MCS7840 and MCS7820 have been developed to connect a wide range
463 of standard serial devices to a USB host. The MCS7840 has a USB
464 device controller connected to four (4) individual UARTs while the
465 MCS7820 controller connects to two (2) individual UARTs.
466
467 To compile this driver as a module, choose M here: the
468 module will be called mos7840. If unsure, choose N.
469
470config USB_SERIAL_MOTOROLA
471 tristate "USB Motorola Phone modem driver"
472 ---help---
473 Say Y here if you want to use a Motorola phone with a USB
474 connector as a modem link.
475
476 To compile this driver as a module, choose M here: the
477 module will be called moto_modem. If unsure, choose N.
478
479config USB_SERIAL_NAVMAN
480 tristate "USB Navman GPS device"
481 help
482 To compile this driver as a module, choose M here: the
483 module will be called navman.
484
485config USB_SERIAL_PL2303
486 tristate "USB Prolific 2303 Single Port Serial Driver"
487 help
488 Say Y here if you want to use the PL2303 USB Serial single port
489 adapter from Prolific.
490
491 To compile this driver as a module, choose M here: the
492 module will be called pl2303.
493
494config USB_SERIAL_OTI6858
495 tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller"
496 help
497 Say Y here if you want to use the OTi-6858 single port USB to serial
498 converter device.
499
500 To compile this driver as a module, choose M here: the
501 module will be called oti6858.
502
503config USB_SERIAL_QCAUX
504 tristate "USB Qualcomm Auxiliary Serial Port Driver"
505 help
506 Say Y here if you want to use the auxiliary serial ports provided
507 by many modems based on Qualcomm chipsets. These ports often use
508 a proprietary protocol called DM and cannot be used for AT- or
509 PPP-based communication.
510
511 To compile this driver as a module, choose M here: the
512 module will be called qcaux. If unsure, choose N.
513
514config USB_SERIAL_QUALCOMM
515 tristate "USB Qualcomm Serial modem"
516 select USB_SERIAL_WWAN
517 help
518 Say Y here if you have a Qualcomm USB modem device. These are
519 usually wireless cellular modems.
520
521 To compile this driver as a module, choose M here: the
522 module will be called qcserial.
523
524config USB_SERIAL_SPCP8X5
525 tristate "USB SPCP8x5 USB To Serial Driver"
526 help
527 Say Y here if you want to use the spcp8x5 converter chip. This is
528 commonly found in some Z-Wave USB devices.
529
530 To compile this driver as a module, choose M here: the
531 module will be called spcp8x5.
532
533config USB_SERIAL_HP4X
534 tristate "USB HP4x Calculators support"
535 help
536 Say Y here if you want to use an Hewlett-Packard 4x Calculator.
537
538 To compile this driver as a module, choose M here: the
539 module will be called hp4x.
540
541config USB_SERIAL_SAFE
542 tristate "USB Safe Serial (Encapsulated) Driver"
543
544config USB_SERIAL_SAFE_PADDED
545 bool "USB Secure Encapsulated Driver - Padded"
546 depends on USB_SERIAL_SAFE
547
548config USB_SERIAL_SIEMENS_MPI
549 tristate "USB Siemens MPI driver"
550 help
551 Say M here if you want to use a Siemens USB/MPI adapter.
552
553 To compile this driver as a module, choose M here: the
554 module will be called siemens_mpi.
555
556config USB_SERIAL_SIERRAWIRELESS
557 tristate "USB Sierra Wireless Driver"
558 help
559 Say M here if you want to use Sierra Wireless devices.
560
561 Many devices have a feature known as TRU-Install. For those devices
562 to work properly, the USB Storage Sierra feature must be enabled.
563
564 To compile this driver as a module, choose M here: the
565 module will be called sierra.
566
567config USB_SERIAL_SYMBOL
568 tristate "USB Symbol Barcode driver (serial mode)"
569 help
570 Say Y here if you want to use a Symbol USB Barcode device
571 in serial emulation mode.
572
573 To compile this driver as a module, choose M here: the
574 module will be called symbolserial.
575
576config USB_SERIAL_TI
577 tristate "USB TI 3410/5052 Serial Driver"
578 help
579 Say Y here if you want to use the TI USB 3410 or 5052
580 serial devices.
581
582 To compile this driver as a module, choose M here: the
583 module will be called ti_usb_3410_5052.
584
585config USB_SERIAL_CYBERJACK
586 tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader"
587 ---help---
588 Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
589 reader. This is an interface to ISO 7816 compatible contact-based
590 chipcards, e.g. GSM SIMs.
591
592 To compile this driver as a module, choose M here: the
593 module will be called cyberjack.
594
595 If unsure, say N.
596
597config USB_SERIAL_XIRCOM
598 tristate "USB Xircom / Entregra Single Port Serial Driver"
599 select USB_EZUSB
600 help
601 Say Y here if you want to use a Xircom or Entregra single port USB to
602 serial converter device. This driver makes use of firmware
603 developed from scratch by Brian Warner.
604
605 To compile this driver as a module, choose M here: the
606 module will be called keyspan_pda.
607
608config USB_SERIAL_WWAN
609 tristate
610
611config USB_SERIAL_OPTION
612 tristate "USB driver for GSM and CDMA modems"
613 select USB_SERIAL_WWAN
614 help
615 Say Y here if you have a GSM or CDMA modem that's connected to USB.
616
617 This driver also supports several PCMCIA cards which have a
618 built-in OHCI-USB adapter and an internally-connected GSM modem.
619 The USB bus on these cards is not accessible externally.
620
621 Supported devices include (some of?) those made by:
622 Option, Huawei, Audiovox, Novatel Wireless, or Anydata.
623
624 To compile this driver as a module, choose M here: the
625 module will be called option.
626
627 If this driver doesn't recognize your device,
628 it might be accessible via the FTDI_SIO driver.
629
630config USB_SERIAL_OMNINET
631 tristate "USB ZyXEL omni.net LCD Plus Driver"
632 help
633 Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
634
635 To compile this driver as a module, choose M here: the
636 module will be called omninet.
637
638config USB_SERIAL_OPTICON
639 tristate "USB Opticon Barcode driver (serial mode)"
640 help
641 Say Y here if you want to use a Opticon USB Barcode device
642 in serial emulation mode.
643
644 To compile this driver as a module, choose M here: the
645 module will be called opticon.
646
647config USB_SERIAL_VIVOPAY_SERIAL
648 tristate "USB ViVOpay serial interface driver"
649 help
650 Say Y here if you want to use a ViVOtech ViVOpay USB device.
651
652 To compile this driver as a module, choose M here: the
653 module will be called vivopay-serial.
654
655config USB_SERIAL_ZIO
656 tristate "ZIO Motherboard USB serial interface driver"
657 help
658 Say Y here if you want to use ZIO Motherboard.
659
660 To compile this driver as a module, choose M here: the
661 module will be called zio.
662
663config USB_SERIAL_SSU100
664 tristate "USB Quatech SSU-100 Single Port Serial Driver"
665 help
666 Say Y here if you want to use the Quatech SSU-100 single
667 port usb to serial adapter.
668
669 To compile this driver as a module, choose M here: the
670 module will be called ssu100.
671
672config USB_SERIAL_QT2
673 tristate "USB Quatech Serial Driver for USB 2 devices"
674 help
675 Say Y here if you want to use the Quatech USB 2
676 serial adapters.
677
678 To compile this driver as a module, choose M here: the
679 module will be called quatech-serial.
680
681config USB_SERIAL_DEBUG
682 tristate "USB Debugging Device"
683 help
684 Say Y here if you have a USB debugging device used to receive
685 debugging data from another machine. The most common of these
686 devices is the NetChip TurboCONNECT device.
687
688 To compile this driver as a module, choose M here: the
689 module will be called usb-debug.
690
691endif # USB_SERIAL