Loading...
1/*
2 * Copyright 2012 Red Hat Inc.
3 *
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the
6 * "Software"), to deal in the Software without restriction, including
7 * without limitation the rights to use, copy, modify, merge, publish,
8 * distribute, sub license, and/or sell copies of the Software, and to
9 * permit persons to whom the Software is furnished to do so, subject to
10 * the following conditions:
11 *
12 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
13 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
14 * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
15 * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
16 * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
17 * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
18 * USE OR OTHER DEALINGS IN THE SOFTWARE.
19 *
20 * The above copyright notice and this permission notice (including the
21 * next paragraph) shall be included in all copies or substantial portions
22 * of the Software.
23 *
24 */
25/*
26 * Authors: Dave Airlie <airlied@redhat.com>
27 */
28
29#include <linux/pci.h>
30
31#include <drm/drm_atomic_helper.h>
32#include <drm/drm_crtc_helper.h>
33#include <drm/drm_gem.h>
34#include <drm/drm_gem_vram_helper.h>
35
36#include "ast_drv.h"
37
38void ast_set_index_reg_mask(struct ast_private *ast,
39 uint32_t base, uint8_t index,
40 uint8_t mask, uint8_t val)
41{
42 u8 tmp;
43 ast_io_write8(ast, base, index);
44 tmp = (ast_io_read8(ast, base + 1) & mask) | val;
45 ast_set_index_reg(ast, base, index, tmp);
46}
47
48uint8_t ast_get_index_reg(struct ast_private *ast,
49 uint32_t base, uint8_t index)
50{
51 uint8_t ret;
52 ast_io_write8(ast, base, index);
53 ret = ast_io_read8(ast, base + 1);
54 return ret;
55}
56
57uint8_t ast_get_index_reg_mask(struct ast_private *ast,
58 uint32_t base, uint8_t index, uint8_t mask)
59{
60 uint8_t ret;
61 ast_io_write8(ast, base, index);
62 ret = ast_io_read8(ast, base + 1) & mask;
63 return ret;
64}
65
66static void ast_detect_config_mode(struct drm_device *dev, u32 *scu_rev)
67{
68 struct device_node *np = dev->pdev->dev.of_node;
69 struct ast_private *ast = to_ast_private(dev);
70 uint32_t data, jregd0, jregd1;
71
72 /* Defaults */
73 ast->config_mode = ast_use_defaults;
74 *scu_rev = 0xffffffff;
75
76 /* Check if we have device-tree properties */
77 if (np && !of_property_read_u32(np, "aspeed,scu-revision-id",
78 scu_rev)) {
79 /* We do, disable P2A access */
80 ast->config_mode = ast_use_dt;
81 drm_info(dev, "Using device-tree for configuration\n");
82 return;
83 }
84
85 /* Not all families have a P2A bridge */
86 if (dev->pdev->device != PCI_CHIP_AST2000)
87 return;
88
89 /*
90 * The BMC will set SCU 0x40 D[12] to 1 if the P2 bridge
91 * is disabled. We force using P2A if VGA only mode bit
92 * is set D[7]
93 */
94 jregd0 = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd0, 0xff);
95 jregd1 = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd1, 0xff);
96 if (!(jregd0 & 0x80) || !(jregd1 & 0x10)) {
97 /* Double check it's actually working */
98 data = ast_read32(ast, 0xf004);
99 if (data != 0xFFFFFFFF) {
100 /* P2A works, grab silicon revision */
101 ast->config_mode = ast_use_p2a;
102
103 drm_info(dev, "Using P2A bridge for configuration\n");
104
105 /* Read SCU7c (silicon revision register) */
106 ast_write32(ast, 0xf004, 0x1e6e0000);
107 ast_write32(ast, 0xf000, 0x1);
108 *scu_rev = ast_read32(ast, 0x1207c);
109 return;
110 }
111 }
112
113 /* We have a P2A bridge but it's disabled */
114 drm_info(dev, "P2A bridge disabled, using default configuration\n");
115}
116
117static int ast_detect_chip(struct drm_device *dev, bool *need_post)
118{
119 struct ast_private *ast = to_ast_private(dev);
120 uint32_t jreg, scu_rev;
121
122 /*
123 * If VGA isn't enabled, we need to enable now or subsequent
124 * access to the scratch registers will fail. We also inform
125 * our caller that it needs to POST the chip
126 * (Assumption: VGA not enabled -> need to POST)
127 */
128 if (!ast_is_vga_enabled(dev)) {
129 ast_enable_vga(dev);
130 drm_info(dev, "VGA not enabled on entry, requesting chip POST\n");
131 *need_post = true;
132 } else
133 *need_post = false;
134
135
136 /* Enable extended register access */
137 ast_open_key(ast);
138 ast_enable_mmio(dev);
139
140 /* Find out whether P2A works or whether to use device-tree */
141 ast_detect_config_mode(dev, &scu_rev);
142
143 /* Identify chipset */
144 if (dev->pdev->revision >= 0x40) {
145 ast->chip = AST2500;
146 drm_info(dev, "AST 2500 detected\n");
147 } else if (dev->pdev->revision >= 0x30) {
148 ast->chip = AST2400;
149 drm_info(dev, "AST 2400 detected\n");
150 } else if (dev->pdev->revision >= 0x20) {
151 ast->chip = AST2300;
152 drm_info(dev, "AST 2300 detected\n");
153 } else if (dev->pdev->revision >= 0x10) {
154 switch (scu_rev & 0x0300) {
155 case 0x0200:
156 ast->chip = AST1100;
157 drm_info(dev, "AST 1100 detected\n");
158 break;
159 case 0x0100:
160 ast->chip = AST2200;
161 drm_info(dev, "AST 2200 detected\n");
162 break;
163 case 0x0000:
164 ast->chip = AST2150;
165 drm_info(dev, "AST 2150 detected\n");
166 break;
167 default:
168 ast->chip = AST2100;
169 drm_info(dev, "AST 2100 detected\n");
170 break;
171 }
172 ast->vga2_clone = false;
173 } else {
174 ast->chip = AST2000;
175 drm_info(dev, "AST 2000 detected\n");
176 }
177
178 /* Check if we support wide screen */
179 switch (ast->chip) {
180 case AST2000:
181 ast->support_wide_screen = false;
182 break;
183 default:
184 jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd0, 0xff);
185 if (!(jreg & 0x80))
186 ast->support_wide_screen = true;
187 else if (jreg & 0x01)
188 ast->support_wide_screen = true;
189 else {
190 ast->support_wide_screen = false;
191 if (ast->chip == AST2300 &&
192 (scu_rev & 0x300) == 0x0) /* ast1300 */
193 ast->support_wide_screen = true;
194 if (ast->chip == AST2400 &&
195 (scu_rev & 0x300) == 0x100) /* ast1400 */
196 ast->support_wide_screen = true;
197 if (ast->chip == AST2500 &&
198 scu_rev == 0x100) /* ast2510 */
199 ast->support_wide_screen = true;
200 }
201 break;
202 }
203
204 /* Check 3rd Tx option (digital output afaik) */
205 ast->tx_chip_type = AST_TX_NONE;
206
207 /*
208 * VGACRA3 Enhanced Color Mode Register, check if DVO is already
209 * enabled, in that case, assume we have a SIL164 TMDS transmitter
210 *
211 * Don't make that assumption if we the chip wasn't enabled and
212 * is at power-on reset, otherwise we'll incorrectly "detect" a
213 * SIL164 when there is none.
214 */
215 if (!*need_post) {
216 jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xa3, 0xff);
217 if (jreg & 0x80)
218 ast->tx_chip_type = AST_TX_SIL164;
219 }
220
221 if ((ast->chip == AST2300) || (ast->chip == AST2400)) {
222 /*
223 * On AST2300 and 2400, look the configuration set by the SoC in
224 * the SOC scratch register #1 bits 11:8 (interestingly marked
225 * as "reserved" in the spec)
226 */
227 jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd1, 0xff);
228 switch (jreg) {
229 case 0x04:
230 ast->tx_chip_type = AST_TX_SIL164;
231 break;
232 case 0x08:
233 ast->dp501_fw_addr = kzalloc(32*1024, GFP_KERNEL);
234 if (ast->dp501_fw_addr) {
235 /* backup firmware */
236 if (ast_backup_fw(dev, ast->dp501_fw_addr, 32*1024)) {
237 kfree(ast->dp501_fw_addr);
238 ast->dp501_fw_addr = NULL;
239 }
240 }
241 fallthrough;
242 case 0x0c:
243 ast->tx_chip_type = AST_TX_DP501;
244 }
245 }
246
247 /* Print stuff for diagnostic purposes */
248 switch(ast->tx_chip_type) {
249 case AST_TX_SIL164:
250 drm_info(dev, "Using Sil164 TMDS transmitter\n");
251 break;
252 case AST_TX_DP501:
253 drm_info(dev, "Using DP501 DisplayPort transmitter\n");
254 break;
255 default:
256 drm_info(dev, "Analog VGA only\n");
257 }
258 return 0;
259}
260
261static int ast_get_dram_info(struct drm_device *dev)
262{
263 struct device_node *np = dev->pdev->dev.of_node;
264 struct ast_private *ast = to_ast_private(dev);
265 uint32_t mcr_cfg, mcr_scu_mpll, mcr_scu_strap;
266 uint32_t denum, num, div, ref_pll, dsel;
267
268 switch (ast->config_mode) {
269 case ast_use_dt:
270 /*
271 * If some properties are missing, use reasonable
272 * defaults for AST2400
273 */
274 if (of_property_read_u32(np, "aspeed,mcr-configuration",
275 &mcr_cfg))
276 mcr_cfg = 0x00000577;
277 if (of_property_read_u32(np, "aspeed,mcr-scu-mpll",
278 &mcr_scu_mpll))
279 mcr_scu_mpll = 0x000050C0;
280 if (of_property_read_u32(np, "aspeed,mcr-scu-strap",
281 &mcr_scu_strap))
282 mcr_scu_strap = 0;
283 break;
284 case ast_use_p2a:
285 ast_write32(ast, 0xf004, 0x1e6e0000);
286 ast_write32(ast, 0xf000, 0x1);
287 mcr_cfg = ast_read32(ast, 0x10004);
288 mcr_scu_mpll = ast_read32(ast, 0x10120);
289 mcr_scu_strap = ast_read32(ast, 0x10170);
290 break;
291 case ast_use_defaults:
292 default:
293 ast->dram_bus_width = 16;
294 ast->dram_type = AST_DRAM_1Gx16;
295 if (ast->chip == AST2500)
296 ast->mclk = 800;
297 else
298 ast->mclk = 396;
299 return 0;
300 }
301
302 if (mcr_cfg & 0x40)
303 ast->dram_bus_width = 16;
304 else
305 ast->dram_bus_width = 32;
306
307 if (ast->chip == AST2500) {
308 switch (mcr_cfg & 0x03) {
309 case 0:
310 ast->dram_type = AST_DRAM_1Gx16;
311 break;
312 default:
313 case 1:
314 ast->dram_type = AST_DRAM_2Gx16;
315 break;
316 case 2:
317 ast->dram_type = AST_DRAM_4Gx16;
318 break;
319 case 3:
320 ast->dram_type = AST_DRAM_8Gx16;
321 break;
322 }
323 } else if (ast->chip == AST2300 || ast->chip == AST2400) {
324 switch (mcr_cfg & 0x03) {
325 case 0:
326 ast->dram_type = AST_DRAM_512Mx16;
327 break;
328 default:
329 case 1:
330 ast->dram_type = AST_DRAM_1Gx16;
331 break;
332 case 2:
333 ast->dram_type = AST_DRAM_2Gx16;
334 break;
335 case 3:
336 ast->dram_type = AST_DRAM_4Gx16;
337 break;
338 }
339 } else {
340 switch (mcr_cfg & 0x0c) {
341 case 0:
342 case 4:
343 ast->dram_type = AST_DRAM_512Mx16;
344 break;
345 case 8:
346 if (mcr_cfg & 0x40)
347 ast->dram_type = AST_DRAM_1Gx16;
348 else
349 ast->dram_type = AST_DRAM_512Mx32;
350 break;
351 case 0xc:
352 ast->dram_type = AST_DRAM_1Gx32;
353 break;
354 }
355 }
356
357 if (mcr_scu_strap & 0x2000)
358 ref_pll = 14318;
359 else
360 ref_pll = 12000;
361
362 denum = mcr_scu_mpll & 0x1f;
363 num = (mcr_scu_mpll & 0x3fe0) >> 5;
364 dsel = (mcr_scu_mpll & 0xc000) >> 14;
365 switch (dsel) {
366 case 3:
367 div = 0x4;
368 break;
369 case 2:
370 case 1:
371 div = 0x2;
372 break;
373 default:
374 div = 0x1;
375 break;
376 }
377 ast->mclk = ref_pll * (num + 2) / ((denum + 2) * (div * 1000));
378 return 0;
379}
380
381int ast_driver_load(struct drm_device *dev, unsigned long flags)
382{
383 struct ast_private *ast;
384 bool need_post;
385 int ret = 0;
386
387 ast = kzalloc(sizeof(struct ast_private), GFP_KERNEL);
388 if (!ast)
389 return -ENOMEM;
390
391 dev->dev_private = ast;
392 ast->dev = dev;
393
394 ast->regs = pci_iomap(dev->pdev, 1, 0);
395 if (!ast->regs) {
396 ret = -EIO;
397 goto out_free;
398 }
399
400 /*
401 * If we don't have IO space at all, use MMIO now and
402 * assume the chip has MMIO enabled by default (rev 0x20
403 * and higher).
404 */
405 if (!(pci_resource_flags(dev->pdev, 2) & IORESOURCE_IO)) {
406 drm_info(dev, "platform has no IO space, trying MMIO\n");
407 ast->ioregs = ast->regs + AST_IO_MM_OFFSET;
408 }
409
410 /* "map" IO regs if the above hasn't done so already */
411 if (!ast->ioregs) {
412 ast->ioregs = pci_iomap(dev->pdev, 2, 0);
413 if (!ast->ioregs) {
414 ret = -EIO;
415 goto out_free;
416 }
417 }
418
419 ast_detect_chip(dev, &need_post);
420
421 ret = ast_get_dram_info(dev);
422 if (ret)
423 goto out_free;
424 drm_info(dev, "dram MCLK=%u Mhz type=%d bus_width=%d\n",
425 ast->mclk, ast->dram_type, ast->dram_bus_width);
426
427 if (need_post)
428 ast_post_gpu(dev);
429
430 ret = ast_mm_init(ast);
431 if (ret)
432 goto out_free;
433
434 ret = ast_mode_config_init(ast);
435 if (ret)
436 goto out_free;
437
438 return 0;
439out_free:
440 kfree(ast);
441 dev->dev_private = NULL;
442 return ret;
443}
444
445void ast_driver_unload(struct drm_device *dev)
446{
447 struct ast_private *ast = to_ast_private(dev);
448
449 /* enable standard VGA decode */
450 ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xa1, 0x04);
451
452 ast_release_firmware(dev);
453 kfree(ast->dp501_fw_addr);
454
455 kfree(ast);
456}
1/*
2 * Copyright 2012 Red Hat Inc.
3 *
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the
6 * "Software"), to deal in the Software without restriction, including
7 * without limitation the rights to use, copy, modify, merge, publish,
8 * distribute, sub license, and/or sell copies of the Software, and to
9 * permit persons to whom the Software is furnished to do so, subject to
10 * the following conditions:
11 *
12 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
13 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
14 * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
15 * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
16 * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
17 * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
18 * USE OR OTHER DEALINGS IN THE SOFTWARE.
19 *
20 * The above copyright notice and this permission notice (including the
21 * next paragraph) shall be included in all copies or substantial portions
22 * of the Software.
23 *
24 */
25/*
26 * Authors: Dave Airlie <airlied@redhat.com>
27 */
28
29#include <linux/of.h>
30#include <linux/pci.h>
31
32#include <drm/drm_atomic_helper.h>
33#include <drm/drm_drv.h>
34#include <drm/drm_gem.h>
35#include <drm/drm_managed.h>
36
37#include "ast_drv.h"
38
39static void ast_detect_widescreen(struct ast_device *ast)
40{
41 u8 jreg;
42
43 /* Check if we support wide screen */
44 switch (AST_GEN(ast)) {
45 case 1:
46 ast->support_wide_screen = false;
47 break;
48 default:
49 jreg = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xd0, 0xff);
50 if (!(jreg & 0x80))
51 ast->support_wide_screen = true;
52 else if (jreg & 0x01)
53 ast->support_wide_screen = true;
54 else {
55 ast->support_wide_screen = false;
56 if (ast->chip == AST1300)
57 ast->support_wide_screen = true;
58 if (ast->chip == AST1400)
59 ast->support_wide_screen = true;
60 if (ast->chip == AST2510)
61 ast->support_wide_screen = true;
62 if (IS_AST_GEN7(ast))
63 ast->support_wide_screen = true;
64 }
65 break;
66 }
67}
68
69static void ast_detect_tx_chip(struct ast_device *ast, bool need_post)
70{
71 static const char * const info_str[] = {
72 "analog VGA",
73 "Sil164 TMDS transmitter",
74 "DP501 DisplayPort transmitter",
75 "ASPEED DisplayPort transmitter",
76 };
77
78 struct drm_device *dev = &ast->base;
79 u8 jreg, vgacrd1;
80
81 /*
82 * Several of the listed TX chips are not explicitly supported
83 * by the ast driver. If these exist in real-world devices, they
84 * are most likely reported as VGA or SIL164 outputs. We warn here
85 * to get bug reports for these devices. If none come in for some
86 * time, we can begin to fail device probing on these values.
87 */
88 vgacrd1 = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xd1, AST_IO_VGACRD1_TX_TYPE_MASK);
89 drm_WARN(dev, vgacrd1 == AST_IO_VGACRD1_TX_ITE66121_VBIOS,
90 "ITE IT66121 detected, 0x%x, Gen%lu\n", vgacrd1, AST_GEN(ast));
91 drm_WARN(dev, vgacrd1 == AST_IO_VGACRD1_TX_CH7003_VBIOS,
92 "Chrontel CH7003 detected, 0x%x, Gen%lu\n", vgacrd1, AST_GEN(ast));
93 drm_WARN(dev, vgacrd1 == AST_IO_VGACRD1_TX_ANX9807_VBIOS,
94 "Analogix ANX9807 detected, 0x%x, Gen%lu\n", vgacrd1, AST_GEN(ast));
95
96 /* Check 3rd Tx option (digital output afaik) */
97 ast->tx_chip = AST_TX_NONE;
98
99 /*
100 * VGACRA3 Enhanced Color Mode Register, check if DVO is already
101 * enabled, in that case, assume we have a SIL164 TMDS transmitter
102 *
103 * Don't make that assumption if we the chip wasn't enabled and
104 * is at power-on reset, otherwise we'll incorrectly "detect" a
105 * SIL164 when there is none.
106 */
107 if (!need_post) {
108 jreg = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xa3, 0xff);
109 if (jreg & 0x80)
110 ast->tx_chip = AST_TX_SIL164;
111 }
112
113 if (IS_AST_GEN4(ast) || IS_AST_GEN5(ast) || IS_AST_GEN6(ast)) {
114 /*
115 * On AST GEN4+, look the configuration set by the SoC in
116 * the SOC scratch register #1 bits 11:8 (interestingly marked
117 * as "reserved" in the spec)
118 */
119 jreg = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xd1,
120 AST_IO_VGACRD1_TX_TYPE_MASK);
121 switch (jreg) {
122 case AST_IO_VGACRD1_TX_SIL164_VBIOS:
123 ast->tx_chip = AST_TX_SIL164;
124 break;
125 case AST_IO_VGACRD1_TX_DP501_VBIOS:
126 ast->dp501_fw_addr = drmm_kzalloc(dev, 32*1024, GFP_KERNEL);
127 if (ast->dp501_fw_addr) {
128 /* backup firmware */
129 if (ast_backup_fw(ast, ast->dp501_fw_addr, 32*1024)) {
130 drmm_kfree(dev, ast->dp501_fw_addr);
131 ast->dp501_fw_addr = NULL;
132 }
133 }
134 fallthrough;
135 case AST_IO_VGACRD1_TX_FW_EMBEDDED_FW:
136 ast->tx_chip = AST_TX_DP501;
137 }
138 } else if (IS_AST_GEN7(ast)) {
139 if (ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xd1, AST_IO_VGACRD1_TX_TYPE_MASK) ==
140 AST_IO_VGACRD1_TX_ASTDP) {
141 int ret = ast_dp_launch(ast);
142
143 if (!ret)
144 ast->tx_chip = AST_TX_ASTDP;
145 }
146 }
147
148 drm_info(dev, "Using %s\n", info_str[ast->tx_chip]);
149}
150
151static int ast_get_dram_info(struct ast_device *ast)
152{
153 struct drm_device *dev = &ast->base;
154 struct device_node *np = dev->dev->of_node;
155 uint32_t mcr_cfg, mcr_scu_mpll, mcr_scu_strap;
156 uint32_t denum, num, div, ref_pll, dsel;
157
158 switch (ast->config_mode) {
159 case ast_use_dt:
160 /*
161 * If some properties are missing, use reasonable
162 * defaults for GEN5
163 */
164 if (of_property_read_u32(np, "aspeed,mcr-configuration",
165 &mcr_cfg))
166 mcr_cfg = 0x00000577;
167 if (of_property_read_u32(np, "aspeed,mcr-scu-mpll",
168 &mcr_scu_mpll))
169 mcr_scu_mpll = 0x000050C0;
170 if (of_property_read_u32(np, "aspeed,mcr-scu-strap",
171 &mcr_scu_strap))
172 mcr_scu_strap = 0;
173 break;
174 case ast_use_p2a:
175 ast_write32(ast, 0xf004, 0x1e6e0000);
176 ast_write32(ast, 0xf000, 0x1);
177 mcr_cfg = ast_read32(ast, 0x10004);
178 mcr_scu_mpll = ast_read32(ast, 0x10120);
179 mcr_scu_strap = ast_read32(ast, 0x10170);
180 break;
181 case ast_use_defaults:
182 default:
183 ast->dram_bus_width = 16;
184 ast->dram_type = AST_DRAM_1Gx16;
185 if (IS_AST_GEN6(ast))
186 ast->mclk = 800;
187 else
188 ast->mclk = 396;
189 return 0;
190 }
191
192 if (mcr_cfg & 0x40)
193 ast->dram_bus_width = 16;
194 else
195 ast->dram_bus_width = 32;
196
197 if (IS_AST_GEN6(ast)) {
198 switch (mcr_cfg & 0x03) {
199 case 0:
200 ast->dram_type = AST_DRAM_1Gx16;
201 break;
202 default:
203 case 1:
204 ast->dram_type = AST_DRAM_2Gx16;
205 break;
206 case 2:
207 ast->dram_type = AST_DRAM_4Gx16;
208 break;
209 case 3:
210 ast->dram_type = AST_DRAM_8Gx16;
211 break;
212 }
213 } else if (IS_AST_GEN4(ast) || IS_AST_GEN5(ast)) {
214 switch (mcr_cfg & 0x03) {
215 case 0:
216 ast->dram_type = AST_DRAM_512Mx16;
217 break;
218 default:
219 case 1:
220 ast->dram_type = AST_DRAM_1Gx16;
221 break;
222 case 2:
223 ast->dram_type = AST_DRAM_2Gx16;
224 break;
225 case 3:
226 ast->dram_type = AST_DRAM_4Gx16;
227 break;
228 }
229 } else {
230 switch (mcr_cfg & 0x0c) {
231 case 0:
232 case 4:
233 ast->dram_type = AST_DRAM_512Mx16;
234 break;
235 case 8:
236 if (mcr_cfg & 0x40)
237 ast->dram_type = AST_DRAM_1Gx16;
238 else
239 ast->dram_type = AST_DRAM_512Mx32;
240 break;
241 case 0xc:
242 ast->dram_type = AST_DRAM_1Gx32;
243 break;
244 }
245 }
246
247 if (mcr_scu_strap & 0x2000)
248 ref_pll = 14318;
249 else
250 ref_pll = 12000;
251
252 denum = mcr_scu_mpll & 0x1f;
253 num = (mcr_scu_mpll & 0x3fe0) >> 5;
254 dsel = (mcr_scu_mpll & 0xc000) >> 14;
255 switch (dsel) {
256 case 3:
257 div = 0x4;
258 break;
259 case 2:
260 case 1:
261 div = 0x2;
262 break;
263 default:
264 div = 0x1;
265 break;
266 }
267 ast->mclk = ref_pll * (num + 2) / ((denum + 2) * (div * 1000));
268 return 0;
269}
270
271struct drm_device *ast_device_create(struct pci_dev *pdev,
272 const struct drm_driver *drv,
273 enum ast_chip chip,
274 enum ast_config_mode config_mode,
275 void __iomem *regs,
276 void __iomem *ioregs,
277 bool need_post)
278{
279 struct drm_device *dev;
280 struct ast_device *ast;
281 int ret;
282
283 ast = devm_drm_dev_alloc(&pdev->dev, drv, struct ast_device, base);
284 if (IS_ERR(ast))
285 return ERR_CAST(ast);
286 dev = &ast->base;
287
288 ast->chip = chip;
289 ast->config_mode = config_mode;
290 ast->regs = regs;
291 ast->ioregs = ioregs;
292
293 ast_detect_widescreen(ast);
294 ast_detect_tx_chip(ast, need_post);
295
296 ret = ast_get_dram_info(ast);
297 if (ret)
298 return ERR_PTR(ret);
299
300 drm_info(dev, "dram MCLK=%u Mhz type=%d bus_width=%d\n",
301 ast->mclk, ast->dram_type, ast->dram_bus_width);
302
303 if (need_post)
304 ast_post_gpu(ast);
305
306 ret = ast_mm_init(ast);
307 if (ret)
308 return ERR_PTR(ret);
309
310 /* map reserved buffer */
311 ast->dp501_fw_buf = NULL;
312 if (ast->vram_size < pci_resource_len(pdev, 0)) {
313 ast->dp501_fw_buf = pci_iomap_range(pdev, 0, ast->vram_size, 0);
314 if (!ast->dp501_fw_buf)
315 drm_info(dev, "failed to map reserved buffer!\n");
316 }
317
318 ret = ast_mode_config_init(ast);
319 if (ret)
320 return ERR_PTR(ret);
321
322 return dev;
323}