Loading...
1# SPDX-License-Identifier: GPL-2.0
2#
3# USB Serial device configuration
4#
5
6menuconfig USB_SERIAL
7 tristate "USB Serial Converter support"
8 depends on TTY
9 help
10 Say Y here if you have a USB device that provides normal serial
11 ports, or acts like a serial device, and you want to connect it to
12 your USB bus.
13
14 Please read <file:Documentation/usb/usb-serial.rst> for more
15 information on the specifics of the different devices that are
16 supported, and on how to use them.
17
18 To compile this driver as a module, choose M here: the
19 module will be called usbserial.
20
21if USB_SERIAL
22
23config USB_SERIAL_CONSOLE
24 bool "USB Serial Console device support"
25 depends on USB_SERIAL=y
26 help
27 If you say Y here, it will be possible to use a USB to serial
28 converter port as the system console (the system console is the
29 device which receives all kernel messages and warnings and which
30 allows logins in single user mode). This could be useful if some
31 terminal or printer is connected to that serial port.
32
33 Even if you say Y here, the currently visible virtual console
34 (/dev/tty0) will still be used as the system console by default, but
35 you can alter that using a kernel command line option such as
36 "console=ttyUSB0". (Try "man bootparam" or see the documentation of
37 your boot loader (lilo or loadlin) about how to pass options to the
38 kernel at boot time.)
39
40 If you don't have a VGA card installed and you say Y here, the
41 kernel will automatically use the first USB to serial converter
42 port, /dev/ttyUSB0, as system console.
43
44 If unsure, say N.
45
46config USB_SERIAL_GENERIC
47 bool "USB Generic Serial Driver"
48 help
49 Say Y here if you want to use the generic USB serial driver. Please
50 read <file:Documentation/usb/usb-serial.rst> for more information on
51 using this driver. It is recommended that the "USB Serial converter
52 support" be compiled as a module for this driver to be used
53 properly.
54
55config USB_SERIAL_SIMPLE
56 tristate "USB Serial Simple Driver"
57 help
58 Say Y here to use the USB serial "simple" driver. This driver
59 handles a wide range of very simple devices, all in one
60 driver. Specifically, it supports:
61 - Suunto ANT+ USB device.
62 - Medtronic CareLink USB device
63 - Fundamental Software dongle.
64 - Google USB serial devices
65 - HP4x calculators
66 - Libtransistor USB console
67 - a number of Motorola phones
68 - Motorola Tetra devices
69 - Novatel Wireless GPS receivers
70 - Siemens USB/MPI adapter.
71 - ViVOtech ViVOpay USB device.
72 - Infineon Modem Flashloader USB interface
73 - ZIO Motherboard USB serial interface
74
75 To compile this driver as a module, choose M here: the module
76 will be called usb-serial-simple.
77
78config USB_SERIAL_AIRCABLE
79 tristate "USB AIRcable Bluetooth Dongle Driver"
80 help
81 Say Y here if you want to use USB AIRcable Bluetooth Dongle.
82
83 To compile this driver as a module, choose M here: the module
84 will be called aircable.
85
86config USB_SERIAL_ARK3116
87 tristate "USB ARK Micro 3116 USB Serial Driver"
88 help
89 Say Y here if you want to use a ARK Micro 3116 USB to Serial
90 device.
91
92 To compile this driver as a module, choose M here: the
93 module will be called ark3116
94
95config USB_SERIAL_BELKIN
96 tristate "USB Belkin and Peracom Single Port Serial Driver"
97 help
98 Say Y here if you want to use a Belkin USB Serial single port
99 adaptor (F5U103 is one of the model numbers) or the Peracom single
100 port USB to serial adapter.
101
102 To compile this driver as a module, choose M here: the
103 module will be called belkin_sa.
104
105config USB_SERIAL_CH341
106 tristate "USB Winchiphead CH341 Single Port Serial Driver"
107 help
108 Say Y here if you want to use a Winchiphead CH341 single port
109 USB to serial adapter.
110
111 To compile this driver as a module, choose M here: the
112 module will be called ch341.
113
114config USB_SERIAL_WHITEHEAT
115 tristate "USB ConnectTech WhiteHEAT Serial Driver"
116 select USB_EZUSB_FX2
117 help
118 Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
119 USB to serial converter device.
120
121 To compile this driver as a module, choose M here: the
122 module will be called whiteheat.
123
124config USB_SERIAL_DIGI_ACCELEPORT
125 tristate "USB Digi International AccelePort USB Serial Driver"
126 help
127 Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
128 2 port (plus parallel port) and 4 port USB serial converters. The
129 parallel port on the USB 2 appears as a third serial port on Linux.
130 The Digi Acceleport USB 8 is not yet supported by this driver.
131
132 To compile this driver as a module, choose M here: the
133 module will be called digi_acceleport.
134
135config USB_SERIAL_CP210X
136 tristate "USB CP210x family of UART Bridge Controllers"
137 help
138 Say Y here if you want to use a CP2101/CP2102/CP2103 based USB
139 to RS232 converters.
140
141 To compile this driver as a module, choose M here: the
142 module will be called cp210x.
143
144config USB_SERIAL_CYPRESS_M8
145 tristate "USB Cypress M8 USB Serial Driver"
146 help
147 Say Y here if you want to use a device that contains the Cypress
148 USB to Serial microcontroller, such as the DeLorme Earthmate GPS.
149
150 Attempted SMP support... send bug reports!
151
152 Supported microcontrollers in the CY4601 family are:
153 CY7C63741 CY7C63742 CY7C63743 CY7C64013
154
155 To compile this driver as a module, choose M here: the
156 module will be called cypress_m8.
157
158config USB_SERIAL_EMPEG
159 tristate "USB Empeg empeg-car Mark I/II Driver"
160 help
161 Say Y here if you want to connect to your Empeg empeg-car Mark I/II
162 mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...}
163 device node. See <file:Documentation/usb/usb-serial.rst> for more
164 tidbits of information.
165
166 To compile this driver as a module, choose M here: the
167 module will be called empeg.
168
169config USB_SERIAL_FTDI_SIO
170 tristate "USB FTDI Single Port Serial Driver"
171 help
172 Say Y here if you want to use a FTDI SIO single port USB to serial
173 converter device. The implementation I have is called the USC-1000.
174 This driver has also been tested with the 245 and 232 devices.
175
176 See <http://ftdi-usb-sio.sourceforge.net/> for more
177 information on this driver and the device.
178
179 To compile this driver as a module, choose M here: the
180 module will be called ftdi_sio.
181
182config USB_SERIAL_VISOR
183 tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
184 help
185 Say Y here if you want to connect to your HandSpring Visor, Palm
186 m500 or m505 through its USB docking station. See
187 <http://usbvisor.sourceforge.net/index.php3> for more information on using this
188 driver.
189
190 To compile this driver as a module, choose M here: the
191 module will be called visor.
192
193config USB_SERIAL_IPAQ
194 tristate "USB PocketPC PDA Driver"
195 help
196 Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
197 or any other PDA running Windows CE 3.0 or PocketPC 2002
198 using a USB cradle/cable. For information on using the driver,
199 read <file:Documentation/usb/usb-serial.rst>.
200
201 To compile this driver as a module, choose M here: the
202 module will be called ipaq.
203
204config USB_SERIAL_IR
205 tristate "USB IR Dongle Serial Driver"
206 help
207 Say Y here if you want to enable simple serial support for USB IrDA
208 devices. This is useful if you do not want to use the full IrDA
209 stack.
210
211 To compile this driver as a module, choose M here: the
212 module will be called ir-usb.
213
214config USB_SERIAL_EDGEPORT
215 tristate "USB Inside Out Edgeport Serial Driver"
216 help
217 Say Y here if you want to use any of the following devices from
218 Inside Out Networks (Digi):
219 Edgeport/4
220 Rapidport/4
221 Edgeport/4t
222 Edgeport/2
223 Edgeport/4i
224 Edgeport/2i
225 Edgeport/421
226 Edgeport/21
227 Edgeport/8
228 Edgeport/8 Dual
229 Edgeport/2D8
230 Edgeport/4D8
231 Edgeport/8i
232 Edgeport/2 DIN
233 Edgeport/4 DIN
234 Edgeport/16 Dual
235
236 To compile this driver as a module, choose M here: the
237 module will be called io_edgeport.
238
239config USB_SERIAL_EDGEPORT_TI
240 tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
241 help
242 Say Y here if you want to use any of the devices from Inside Out
243 Networks (Digi) that are not supported by the io_edgeport driver.
244 This includes the Edgeport/1 device.
245
246 To compile this driver as a module, choose M here: the
247 module will be called io_ti.
248
249config USB_SERIAL_F81232
250 tristate "USB Fintek F81232 Single Port Serial Driver"
251 help
252 Say Y here if you want to use the Fintek F81232 single
253 port usb to serial adapter.
254
255 To compile this driver as a module, choose M here: the
256 module will be called f81232.
257
258config USB_SERIAL_F8153X
259 tristate "USB Fintek F81532/534 Multi-Ports Serial Driver"
260 help
261 Say Y here if you want to use the Fintek F81532/534 Multi-Ports
262 USB to serial adapter.
263
264 To compile this driver as a module, choose M here: the
265 module will be called f81534.
266
267
268config USB_SERIAL_GARMIN
269 tristate "USB Garmin GPS driver"
270 help
271 Say Y here if you want to connect to your Garmin GPS.
272 Should work with most Garmin GPS devices which have a native USB port.
273
274 See <http://sourceforge.net/projects/garmin-gps> for the latest
275 version of the driver.
276
277 To compile this driver as a module, choose M here: the
278 module will be called garmin_gps.
279
280config USB_SERIAL_IPW
281 tristate "USB IPWireless (3G UMTS TDD) Driver"
282 select USB_SERIAL_WWAN
283 help
284 Say Y here if you want to use a IPWireless USB modem such as
285 the ones supplied by Axity3G/Sentech South Africa.
286
287 To compile this driver as a module, choose M here: the
288 module will be called ipw.
289
290config USB_SERIAL_IUU
291 tristate "USB Infinity USB Unlimited Phoenix Driver"
292 help
293 Say Y here if you want to use a IUU in phoenix mode and get
294 an extra ttyUSBx device. More information available on
295 http://eczema.ecze.com/iuu_phoenix.html
296
297 To compile this driver as a module, choose M here: the
298 module will be called iuu_phoenix.o
299
300config USB_SERIAL_KEYSPAN_PDA
301 tristate "USB Keyspan PDA Single Port Serial Driver"
302 select USB_EZUSB_FX2
303 help
304 Say Y here if you want to use a Keyspan PDA single port USB to
305 serial converter device. This driver makes use of firmware
306 developed from scratch by Brian Warner.
307
308 To compile this driver as a module, choose M here: the
309 module will be called keyspan_pda.
310
311config USB_SERIAL_KEYSPAN
312 tristate "USB Keyspan USA-xxx Serial Driver"
313 select USB_EZUSB_FX2
314 help
315 Say Y here if you want to use Keyspan USB to serial converter
316 devices. This driver makes use of Keyspan's official firmware
317 and was developed with their support. You must also include
318 firmware to support your particular device(s).
319
320 See <http://blemings.org/hugh/keyspan.html> for more information.
321
322 To compile this driver as a module, choose M here: the
323 module will be called keyspan.
324
325config USB_SERIAL_KLSI
326 tristate "USB KL5KUSB105 (Palmconnect) Driver"
327 help
328 Say Y here if you want to use a KL5KUSB105 - based single port
329 serial adapter. The most widely known -- and currently the only
330 tested -- device in this category is the PalmConnect USB Serial
331 adapter sold by Palm Inc. for use with their Palm III and Palm V
332 series PDAs.
333
334 Please read <file:Documentation/usb/usb-serial.rst> for more
335 information.
336
337 To compile this driver as a module, choose M here: the
338 module will be called kl5kusb105.
339
340config USB_SERIAL_KOBIL_SCT
341 tristate "USB KOBIL chipcard reader"
342 help
343 Say Y here if you want to use one of the following KOBIL USB chipcard
344 readers:
345
346 - USB TWIN
347 - KAAN Standard Plus
348 - KAAN SIM
349 - SecOVID Reader Plus
350 - B1 Professional
351 - KAAN Professional
352
353 Note that you need a current CT-API.
354 To compile this driver as a module, choose M here: the
355 module will be called kobil_sct.
356
357config USB_SERIAL_MCT_U232
358 tristate "USB MCT Single Port Serial Driver"
359 help
360 Say Y here if you want to use a USB Serial single port adapter from
361 Magic Control Technology Corp. (U232 is one of the model numbers).
362
363 This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
364 BAY, Belkin F5U109, and Belkin F5U409 devices.
365
366 To compile this driver as a module, choose M here: the
367 module will be called mct_u232.
368
369config USB_SERIAL_METRO
370 tristate "USB Metrologic Instruments USB-POS Barcode Scanner Driver"
371 help
372 Say Y here if you want to use a USB POS Metrologic barcode scanner.
373
374 To compile this driver as a module, choose M here: the
375 module will be called metro-usb.
376
377config USB_SERIAL_MOS7720
378 tristate "USB Moschip 7720 Serial Driver"
379 help
380 Say Y here if you want to use USB Serial single and double
381 port adapters from Moschip Semiconductor Tech.
382
383 To compile this driver as a module, choose M here: the
384 module will be called mos7720.
385
386config USB_SERIAL_MOS7715_PARPORT
387 bool "Support for parallel port on the Moschip 7715"
388 depends on USB_SERIAL_MOS7720
389 depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720
390 select PARPORT_NOT_PC
391 help
392 Say Y if you have a Moschip 7715 device and would like to use
393 the parallel port it provides. The port will register with
394 the parport subsystem as a low-level driver.
395
396config USB_SERIAL_MOS7840
397 tristate "USB Moschip 7840/7820 USB Serial Driver"
398 help
399 Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820
400 Dual-Serial port device from MosChip Semiconductor.
401
402 The MCS7840 and MCS7820 have been developed to connect a wide range
403 of standard serial devices to a USB host. The MCS7840 has a USB
404 device controller connected to four (4) individual UARTs while the
405 MCS7820 controller connects to two (2) individual UARTs.
406
407 To compile this driver as a module, choose M here: the
408 module will be called mos7840. If unsure, choose N.
409
410config USB_SERIAL_MXUPORT
411 tristate "USB Moxa UPORT Serial Driver"
412 help
413 Say Y here if you want to use a MOXA UPort Serial hub.
414
415 This driver supports:
416
417 [2 Port]
418 - UPort 1250 : 2 Port RS-232/422/485 USB to Serial Hub
419 - UPort 1250I : 2 Port RS-232/422/485 USB to Serial Hub with
420 Isolation
421
422 [4 Port]
423 - UPort 1410 : 4 Port RS-232 USB to Serial Hub
424 - UPort 1450 : 4 Port RS-232/422/485 USB to Serial Hub
425 - UPort 1450I : 4 Port RS-232/422/485 USB to Serial Hub with
426 Isolation
427
428 [8 Port]
429 - UPort 1610-8 : 8 Port RS-232 USB to Serial Hub
430 - UPort 1650-8 : 8 Port RS-232/422/485 USB to Serial Hub
431
432 [16 Port]
433 - UPort 1610-16 : 16 Port RS-232 USB to Serial Hub
434 - UPort 1650-16 : 16 Port RS-232/422/485 USB to Serial Hub
435
436 To compile this driver as a module, choose M here: the
437 module will be called mxuport.
438
439config USB_SERIAL_NAVMAN
440 tristate "USB Navman GPS device"
441 help
442 To compile this driver as a module, choose M here: the
443 module will be called navman.
444
445config USB_SERIAL_PL2303
446 tristate "USB Prolific 2303 Single Port Serial Driver"
447 help
448 Say Y here if you want to use the PL2303 USB Serial single port
449 adapter from Prolific.
450
451 To compile this driver as a module, choose M here: the
452 module will be called pl2303.
453
454config USB_SERIAL_OTI6858
455 tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller"
456 help
457 Say Y here if you want to use the OTi-6858 single port USB to serial
458 converter device.
459
460 To compile this driver as a module, choose M here: the
461 module will be called oti6858.
462
463config USB_SERIAL_QCAUX
464 tristate "USB Qualcomm Auxiliary Serial Port Driver"
465 help
466 Say Y here if you want to use the auxiliary serial ports provided
467 by many modems based on Qualcomm chipsets. These ports often use
468 a proprietary protocol called DM and cannot be used for AT- or
469 PPP-based communication.
470
471 To compile this driver as a module, choose M here: the
472 module will be called qcaux. If unsure, choose N.
473
474config USB_SERIAL_QUALCOMM
475 tristate "USB Qualcomm Serial modem"
476 select USB_SERIAL_WWAN
477 help
478 Say Y here if you have a Qualcomm USB modem device. These are
479 usually wireless cellular modems.
480
481 To compile this driver as a module, choose M here: the
482 module will be called qcserial.
483
484config USB_SERIAL_SPCP8X5
485 tristate "USB SPCP8x5 USB To Serial Driver"
486 help
487 Say Y here if you want to use the spcp8x5 converter chip. This is
488 commonly found in some Z-Wave USB devices.
489
490 To compile this driver as a module, choose M here: the
491 module will be called spcp8x5.
492
493config USB_SERIAL_SAFE
494 tristate "USB Safe Serial (Encapsulated) Driver"
495
496config USB_SERIAL_SAFE_PADDED
497 bool "USB Secure Encapsulated Driver - Padded"
498 depends on USB_SERIAL_SAFE
499
500config USB_SERIAL_SIERRAWIRELESS
501 tristate "USB Sierra Wireless Driver"
502 help
503 Say M here if you want to use Sierra Wireless devices.
504
505 Many devices have a feature known as TRU-Install. For those devices
506 to work properly, the USB Storage Sierra feature must be enabled.
507
508 To compile this driver as a module, choose M here: the
509 module will be called sierra.
510
511config USB_SERIAL_SYMBOL
512 tristate "USB Symbol Barcode driver (serial mode)"
513 help
514 Say Y here if you want to use a Symbol USB Barcode device
515 in serial emulation mode.
516
517 To compile this driver as a module, choose M here: the
518 module will be called symbolserial.
519
520config USB_SERIAL_TI
521 tristate "USB TI 3410/5052 Serial Driver"
522 help
523 Say Y here if you want to use the TI USB 3410 or 5052
524 serial devices.
525
526 To compile this driver as a module, choose M here: the
527 module will be called ti_usb_3410_5052.
528
529config USB_SERIAL_CYBERJACK
530 tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader"
531 help
532 Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
533 reader. This is an interface to ISO 7816 compatible contact-based
534 chipcards, e.g. GSM SIMs.
535
536 To compile this driver as a module, choose M here: the
537 module will be called cyberjack.
538
539 If unsure, say N.
540
541config USB_SERIAL_XIRCOM
542 tristate "USB Xircom / Entrega Single Port Serial Driver"
543 select USB_EZUSB_FX2
544 help
545 Say Y here if you want to use a Xircom or Entrega single port USB to
546 serial converter device. This driver makes use of firmware
547 developed from scratch by Brian Warner.
548
549 To compile this driver as a module, choose M here: the
550 module will be called keyspan_pda.
551
552config USB_SERIAL_WWAN
553 tristate
554
555config USB_SERIAL_OPTION
556 tristate "USB driver for GSM and CDMA modems"
557 select USB_SERIAL_WWAN
558 help
559 Say Y here if you have a GSM or CDMA modem that's connected to USB.
560
561 This driver also supports several PCMCIA cards which have a
562 built-in OHCI-USB adapter and an internally-connected GSM modem.
563 The USB bus on these cards is not accessible externally.
564
565 Supported devices include (some of?) those made by:
566 Option, Huawei, Audiovox, Novatel Wireless, or Anydata.
567
568 To compile this driver as a module, choose M here: the
569 module will be called option.
570
571 If this driver doesn't recognize your device,
572 it might be accessible via the FTDI_SIO driver.
573
574config USB_SERIAL_OMNINET
575 tristate "USB ZyXEL omni.net LCD Plus Driver"
576 help
577 Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
578
579 To compile this driver as a module, choose M here: the
580 module will be called omninet.
581
582config USB_SERIAL_OPTICON
583 tristate "USB Opticon Barcode driver (serial mode)"
584 help
585 Say Y here if you want to use a Opticon USB Barcode device
586 in serial emulation mode.
587
588 To compile this driver as a module, choose M here: the
589 module will be called opticon.
590
591config USB_SERIAL_XSENS_MT
592 tristate "Xsens motion tracker serial interface driver"
593 help
594 Say Y here if you want to use Xsens motion trackers.
595
596 This driver supports the new generation of motion trackers
597 by Xsens. Older devices can be accessed using the FTDI_SIO
598 driver.
599
600 To compile this driver as a module, choose M here: the
601 module will be called xsens_mt.
602
603config USB_SERIAL_WISHBONE
604 tristate "USB-Wishbone adapter interface driver"
605 help
606 Say Y here if you want to use a USB attached Wishbone bus.
607
608 Wishbone is an open hardware SoC bus commonly used in FPGA
609 designs. Bus access can be serialized using the Etherbone
610 protocol <http://www.ohwr.org/projects/etherbone-core>.
611
612 This driver is intended to be used with devices which attach
613 their internal Wishbone bus to a USB serial interface using
614 the Etherbone protocol. A userspace library is required to
615 speak the protocol made available by this driver as ttyUSBx.
616
617 To compile this driver as a module, choose M here: the
618 module will be called wishbone-serial.
619
620config USB_SERIAL_SSU100
621 tristate "USB Quatech SSU-100 Single Port Serial Driver"
622 help
623 Say Y here if you want to use the Quatech SSU-100 single
624 port usb to serial adapter.
625
626 To compile this driver as a module, choose M here: the
627 module will be called ssu100.
628
629config USB_SERIAL_QT2
630 tristate "USB Quatech Serial Driver for USB 2 devices"
631 help
632 Say Y here if you want to use the Quatech USB 2
633 serial adapters.
634
635 To compile this driver as a module, choose M here: the
636 module will be called quatech-serial.
637
638config USB_SERIAL_UPD78F0730
639 tristate "USB Renesas uPD78F0730 Single Port Serial Driver"
640 help
641 Say Y here if you want to use the Renesas uPD78F0730
642 serial driver.
643
644 To compile this driver as a module, choose M here: the
645 module will be called upd78f0730.
646
647config USB_SERIAL_DEBUG
648 tristate "USB Debugging Device"
649 help
650 Say Y here if you have a USB debugging device used to receive
651 debugging data from another machine. The most common of these
652 devices is the NetChip TurboCONNECT device.
653
654 To compile this driver as a module, choose M here: the
655 module will be called usb-debug.
656
657endif # USB_SERIAL
1# SPDX-License-Identifier: GPL-2.0
2#
3# USB Serial device configuration
4#
5
6menuconfig USB_SERIAL
7 tristate "USB Serial Converter support"
8 depends on TTY
9 ---help---
10 Say Y here if you have a USB device that provides normal serial
11 ports, or acts like a serial device, and you want to connect it to
12 your USB bus.
13
14 Please read <file:Documentation/usb/usb-serial.rst> for more
15 information on the specifics of the different devices that are
16 supported, and on how to use them.
17
18 To compile this driver as a module, choose M here: the
19 module will be called usbserial.
20
21if USB_SERIAL
22
23config USB_SERIAL_CONSOLE
24 bool "USB Serial Console device support"
25 depends on USB_SERIAL=y
26 ---help---
27 If you say Y here, it will be possible to use a USB to serial
28 converter port as the system console (the system console is the
29 device which receives all kernel messages and warnings and which
30 allows logins in single user mode). This could be useful if some
31 terminal or printer is connected to that serial port.
32
33 Even if you say Y here, the currently visible virtual console
34 (/dev/tty0) will still be used as the system console by default, but
35 you can alter that using a kernel command line option such as
36 "console=ttyUSB0". (Try "man bootparam" or see the documentation of
37 your boot loader (lilo or loadlin) about how to pass options to the
38 kernel at boot time.)
39
40 If you don't have a VGA card installed and you say Y here, the
41 kernel will automatically use the first USB to serial converter
42 port, /dev/ttyUSB0, as system console.
43
44 If unsure, say N.
45
46config USB_SERIAL_GENERIC
47 bool "USB Generic Serial Driver"
48 help
49 Say Y here if you want to use the generic USB serial driver. Please
50 read <file:Documentation/usb/usb-serial.rst> for more information on
51 using this driver. It is recommended that the "USB Serial converter
52 support" be compiled as a module for this driver to be used
53 properly.
54
55config USB_SERIAL_SIMPLE
56 tristate "USB Serial Simple Driver"
57 help
58 Say Y here to use the USB serial "simple" driver. This driver
59 handles a wide range of very simple devices, all in one
60 driver. Specifically, it supports:
61 - Suunto ANT+ USB device.
62 - Medtronic CareLink USB device
63 - Fundamental Software dongle.
64 - Google USB serial devices
65 - HP4x calculators
66 - Libtransistor USB console
67 - a number of Motorola phones
68 - Motorola Tetra devices
69 - Novatel Wireless GPS receivers
70 - Siemens USB/MPI adapter.
71 - ViVOtech ViVOpay USB device.
72 - Infineon Modem Flashloader USB interface
73 - ZIO Motherboard USB serial interface
74
75 To compile this driver as a module, choose M here: the module
76 will be called usb-serial-simple.
77
78config USB_SERIAL_AIRCABLE
79 tristate "USB AIRcable Bluetooth Dongle Driver"
80 help
81 Say Y here if you want to use USB AIRcable Bluetooth Dongle.
82
83 To compile this driver as a module, choose M here: the module
84 will be called aircable.
85
86config USB_SERIAL_ARK3116
87 tristate "USB ARK Micro 3116 USB Serial Driver"
88 help
89 Say Y here if you want to use a ARK Micro 3116 USB to Serial
90 device.
91
92 To compile this driver as a module, choose M here: the
93 module will be called ark3116
94
95config USB_SERIAL_BELKIN
96 tristate "USB Belkin and Peracom Single Port Serial Driver"
97 help
98 Say Y here if you want to use a Belkin USB Serial single port
99 adaptor (F5U103 is one of the model numbers) or the Peracom single
100 port USB to serial adapter.
101
102 To compile this driver as a module, choose M here: the
103 module will be called belkin_sa.
104
105config USB_SERIAL_CH341
106 tristate "USB Winchiphead CH341 Single Port Serial Driver"
107 help
108 Say Y here if you want to use a Winchiphead CH341 single port
109 USB to serial adapter.
110
111 To compile this driver as a module, choose M here: the
112 module will be called ch341.
113
114config USB_SERIAL_WHITEHEAT
115 tristate "USB ConnectTech WhiteHEAT Serial Driver"
116 select USB_EZUSB_FX2
117 help
118 Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
119 USB to serial converter device.
120
121 To compile this driver as a module, choose M here: the
122 module will be called whiteheat.
123
124config USB_SERIAL_DIGI_ACCELEPORT
125 tristate "USB Digi International AccelePort USB Serial Driver"
126 ---help---
127 Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
128 2 port (plus parallel port) and 4 port USB serial converters. The
129 parallel port on the USB 2 appears as a third serial port on Linux.
130 The Digi Acceleport USB 8 is not yet supported by this driver.
131
132 This driver works under SMP with the usb-uhci driver. It does not
133 work under SMP with the uhci driver.
134
135 To compile this driver as a module, choose M here: the
136 module will be called digi_acceleport.
137
138config USB_SERIAL_CP210X
139 tristate "USB CP210x family of UART Bridge Controllers"
140 help
141 Say Y here if you want to use a CP2101/CP2102/CP2103 based USB
142 to RS232 converters.
143
144 To compile this driver as a module, choose M here: the
145 module will be called cp210x.
146
147config USB_SERIAL_CYPRESS_M8
148 tristate "USB Cypress M8 USB Serial Driver"
149 help
150 Say Y here if you want to use a device that contains the Cypress
151 USB to Serial microcontroller, such as the DeLorme Earthmate GPS.
152
153 Attempted SMP support... send bug reports!
154
155 Supported microcontrollers in the CY4601 family are:
156 CY7C63741 CY7C63742 CY7C63743 CY7C64013
157
158 To compile this driver as a module, choose M here: the
159 module will be called cypress_m8.
160
161config USB_SERIAL_EMPEG
162 tristate "USB Empeg empeg-car Mark I/II Driver"
163 help
164 Say Y here if you want to connect to your Empeg empeg-car Mark I/II
165 mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...}
166 device node. See <file:Documentation/usb/usb-serial.rst> for more
167 tidbits of information.
168
169 To compile this driver as a module, choose M here: the
170 module will be called empeg.
171
172config USB_SERIAL_FTDI_SIO
173 tristate "USB FTDI Single Port Serial Driver"
174 ---help---
175 Say Y here if you want to use a FTDI SIO single port USB to serial
176 converter device. The implementation I have is called the USC-1000.
177 This driver has also been tested with the 245 and 232 devices.
178
179 See <http://ftdi-usb-sio.sourceforge.net/> for more
180 information on this driver and the device.
181
182 To compile this driver as a module, choose M here: the
183 module will be called ftdi_sio.
184
185config USB_SERIAL_VISOR
186 tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
187 help
188 Say Y here if you want to connect to your HandSpring Visor, Palm
189 m500 or m505 through its USB docking station. See
190 <http://usbvisor.sourceforge.net/index.php3> for more information on using this
191 driver.
192
193 To compile this driver as a module, choose M here: the
194 module will be called visor.
195
196config USB_SERIAL_IPAQ
197 tristate "USB PocketPC PDA Driver"
198 help
199 Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
200 or any other PDA running Windows CE 3.0 or PocketPC 2002
201 using a USB cradle/cable. For information on using the driver,
202 read <file:Documentation/usb/usb-serial.rst>.
203
204 To compile this driver as a module, choose M here: the
205 module will be called ipaq.
206
207config USB_SERIAL_IR
208 tristate "USB IR Dongle Serial Driver"
209 help
210 Say Y here if you want to enable simple serial support for USB IrDA
211 devices. This is useful if you do not want to use the full IrDA
212 stack.
213
214 To compile this driver as a module, choose M here: the
215 module will be called ir-usb.
216
217config USB_SERIAL_EDGEPORT
218 tristate "USB Inside Out Edgeport Serial Driver"
219 ---help---
220 Say Y here if you want to use any of the following devices from
221 Inside Out Networks (Digi):
222 Edgeport/4
223 Rapidport/4
224 Edgeport/4t
225 Edgeport/2
226 Edgeport/4i
227 Edgeport/2i
228 Edgeport/421
229 Edgeport/21
230 Edgeport/8
231 Edgeport/8 Dual
232 Edgeport/2D8
233 Edgeport/4D8
234 Edgeport/8i
235 Edgeport/2 DIN
236 Edgeport/4 DIN
237 Edgeport/16 Dual
238
239 To compile this driver as a module, choose M here: the
240 module will be called io_edgeport.
241
242config USB_SERIAL_EDGEPORT_TI
243 tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
244 help
245 Say Y here if you want to use any of the devices from Inside Out
246 Networks (Digi) that are not supported by the io_edgeport driver.
247 This includes the Edgeport/1 device.
248
249 To compile this driver as a module, choose M here: the
250 module will be called io_ti.
251
252config USB_SERIAL_F81232
253 tristate "USB Fintek F81232 Single Port Serial Driver"
254 help
255 Say Y here if you want to use the Fintek F81232 single
256 port usb to serial adapter.
257
258 To compile this driver as a module, choose M here: the
259 module will be called f81232.
260
261config USB_SERIAL_F8153X
262 tristate "USB Fintek F81532/534 Multi-Ports Serial Driver"
263 help
264 Say Y here if you want to use the Fintek F81532/534 Multi-Ports
265 USB to serial adapter.
266
267 To compile this driver as a module, choose M here: the
268 module will be called f81534.
269
270
271config USB_SERIAL_GARMIN
272 tristate "USB Garmin GPS driver"
273 help
274 Say Y here if you want to connect to your Garmin GPS.
275 Should work with most Garmin GPS devices which have a native USB port.
276
277 See <http://sourceforge.net/projects/garmin-gps> for the latest
278 version of the driver.
279
280 To compile this driver as a module, choose M here: the
281 module will be called garmin_gps.
282
283config USB_SERIAL_IPW
284 tristate "USB IPWireless (3G UMTS TDD) Driver"
285 select USB_SERIAL_WWAN
286 help
287 Say Y here if you want to use a IPWireless USB modem such as
288 the ones supplied by Axity3G/Sentech South Africa.
289
290 To compile this driver as a module, choose M here: the
291 module will be called ipw.
292
293config USB_SERIAL_IUU
294 tristate "USB Infinity USB Unlimited Phoenix Driver"
295 help
296 Say Y here if you want to use a IUU in phoenix mode and get
297 an extra ttyUSBx device. More information available on
298 http://eczema.ecze.com/iuu_phoenix.html
299
300 To compile this driver as a module, choose M here: the
301 module will be called iuu_phoenix.o
302
303config USB_SERIAL_KEYSPAN_PDA
304 tristate "USB Keyspan PDA Single Port Serial Driver"
305 select USB_EZUSB_FX2
306 help
307 Say Y here if you want to use a Keyspan PDA single port USB to
308 serial converter device. This driver makes use of firmware
309 developed from scratch by Brian Warner.
310
311 To compile this driver as a module, choose M here: the
312 module will be called keyspan_pda.
313
314config USB_SERIAL_KEYSPAN
315 tristate "USB Keyspan USA-xxx Serial Driver"
316 select USB_EZUSB_FX2
317 ---help---
318 Say Y here if you want to use Keyspan USB to serial converter
319 devices. This driver makes use of Keyspan's official firmware
320 and was developed with their support. You must also include
321 firmware to support your particular device(s).
322
323 See <http://blemings.org/hugh/keyspan.html> for more information.
324
325 To compile this driver as a module, choose M here: the
326 module will be called keyspan.
327
328config USB_SERIAL_KLSI
329 tristate "USB KL5KUSB105 (Palmconnect) Driver"
330 ---help---
331 Say Y here if you want to use a KL5KUSB105 - based single port
332 serial adapter. The most widely known -- and currently the only
333 tested -- device in this category is the PalmConnect USB Serial
334 adapter sold by Palm Inc. for use with their Palm III and Palm V
335 series PDAs.
336
337 Please read <file:Documentation/usb/usb-serial.rst> for more
338 information.
339
340 To compile this driver as a module, choose M here: the
341 module will be called kl5kusb105.
342
343config USB_SERIAL_KOBIL_SCT
344 tristate "USB KOBIL chipcard reader"
345 ---help---
346 Say Y here if you want to use one of the following KOBIL USB chipcard
347 readers:
348
349 - USB TWIN
350 - KAAN Standard Plus
351 - KAAN SIM
352 - SecOVID Reader Plus
353 - B1 Professional
354 - KAAN Professional
355
356 Note that you need a current CT-API.
357 To compile this driver as a module, choose M here: the
358 module will be called kobil_sct.
359
360config USB_SERIAL_MCT_U232
361 tristate "USB MCT Single Port Serial Driver"
362 ---help---
363 Say Y here if you want to use a USB Serial single port adapter from
364 Magic Control Technology Corp. (U232 is one of the model numbers).
365
366 This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
367 BAY, Belkin F5U109, and Belkin F5U409 devices.
368
369 To compile this driver as a module, choose M here: the
370 module will be called mct_u232.
371
372config USB_SERIAL_METRO
373 tristate "USB Metrologic Instruments USB-POS Barcode Scanner Driver"
374 ---help---
375 Say Y here if you want to use a USB POS Metrologic barcode scanner.
376
377 To compile this driver as a module, choose M here: the
378 module will be called metro-usb.
379
380config USB_SERIAL_MOS7720
381 tristate "USB Moschip 7720 Serial Driver"
382 ---help---
383 Say Y here if you want to use USB Serial single and double
384 port adapters from Moschip Semiconductor Tech.
385
386 To compile this driver as a module, choose M here: the
387 module will be called mos7720.
388
389config USB_SERIAL_MOS7715_PARPORT
390 bool "Support for parallel port on the Moschip 7715"
391 depends on USB_SERIAL_MOS7720
392 depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720
393 select PARPORT_NOT_PC
394 ---help---
395 Say Y if you have a Moschip 7715 device and would like to use
396 the parallel port it provides. The port will register with
397 the parport subsystem as a low-level driver.
398
399config USB_SERIAL_MOS7840
400 tristate "USB Moschip 7840/7820 USB Serial Driver"
401 ---help---
402 Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820
403 Dual-Serial port device from MosChip Semiconductor.
404
405 The MCS7840 and MCS7820 have been developed to connect a wide range
406 of standard serial devices to a USB host. The MCS7840 has a USB
407 device controller connected to four (4) individual UARTs while the
408 MCS7820 controller connects to two (2) individual UARTs.
409
410 To compile this driver as a module, choose M here: the
411 module will be called mos7840. If unsure, choose N.
412
413config USB_SERIAL_MXUPORT
414 tristate "USB Moxa UPORT Serial Driver"
415 ---help---
416 Say Y here if you want to use a MOXA UPort Serial hub.
417
418 This driver supports:
419
420 [2 Port]
421 - UPort 1250 : 2 Port RS-232/422/485 USB to Serial Hub
422 - UPort 1250I : 2 Port RS-232/422/485 USB to Serial Hub with
423 Isolation
424
425 [4 Port]
426 - UPort 1410 : 4 Port RS-232 USB to Serial Hub
427 - UPort 1450 : 4 Port RS-232/422/485 USB to Serial Hub
428 - UPort 1450I : 4 Port RS-232/422/485 USB to Serial Hub with
429 Isolation
430
431 [8 Port]
432 - UPort 1610-8 : 8 Port RS-232 USB to Serial Hub
433 - UPort 1650-8 : 8 Port RS-232/422/485 USB to Serial Hub
434
435 [16 Port]
436 - UPort 1610-16 : 16 Port RS-232 USB to Serial Hub
437 - UPort 1650-16 : 16 Port RS-232/422/485 USB to Serial Hub
438
439 To compile this driver as a module, choose M here: the
440 module will be called mxuport.
441
442config USB_SERIAL_NAVMAN
443 tristate "USB Navman GPS device"
444 help
445 To compile this driver as a module, choose M here: the
446 module will be called navman.
447
448config USB_SERIAL_PL2303
449 tristate "USB Prolific 2303 Single Port Serial Driver"
450 help
451 Say Y here if you want to use the PL2303 USB Serial single port
452 adapter from Prolific.
453
454 To compile this driver as a module, choose M here: the
455 module will be called pl2303.
456
457config USB_SERIAL_OTI6858
458 tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller"
459 help
460 Say Y here if you want to use the OTi-6858 single port USB to serial
461 converter device.
462
463 To compile this driver as a module, choose M here: the
464 module will be called oti6858.
465
466config USB_SERIAL_QCAUX
467 tristate "USB Qualcomm Auxiliary Serial Port Driver"
468 help
469 Say Y here if you want to use the auxiliary serial ports provided
470 by many modems based on Qualcomm chipsets. These ports often use
471 a proprietary protocol called DM and cannot be used for AT- or
472 PPP-based communication.
473
474 To compile this driver as a module, choose M here: the
475 module will be called qcaux. If unsure, choose N.
476
477config USB_SERIAL_QUALCOMM
478 tristate "USB Qualcomm Serial modem"
479 select USB_SERIAL_WWAN
480 help
481 Say Y here if you have a Qualcomm USB modem device. These are
482 usually wireless cellular modems.
483
484 To compile this driver as a module, choose M here: the
485 module will be called qcserial.
486
487config USB_SERIAL_SPCP8X5
488 tristate "USB SPCP8x5 USB To Serial Driver"
489 help
490 Say Y here if you want to use the spcp8x5 converter chip. This is
491 commonly found in some Z-Wave USB devices.
492
493 To compile this driver as a module, choose M here: the
494 module will be called spcp8x5.
495
496config USB_SERIAL_SAFE
497 tristate "USB Safe Serial (Encapsulated) Driver"
498
499config USB_SERIAL_SAFE_PADDED
500 bool "USB Secure Encapsulated Driver - Padded"
501 depends on USB_SERIAL_SAFE
502
503config USB_SERIAL_SIERRAWIRELESS
504 tristate "USB Sierra Wireless Driver"
505 help
506 Say M here if you want to use Sierra Wireless devices.
507
508 Many devices have a feature known as TRU-Install. For those devices
509 to work properly, the USB Storage Sierra feature must be enabled.
510
511 To compile this driver as a module, choose M here: the
512 module will be called sierra.
513
514config USB_SERIAL_SYMBOL
515 tristate "USB Symbol Barcode driver (serial mode)"
516 help
517 Say Y here if you want to use a Symbol USB Barcode device
518 in serial emulation mode.
519
520 To compile this driver as a module, choose M here: the
521 module will be called symbolserial.
522
523config USB_SERIAL_TI
524 tristate "USB TI 3410/5052 Serial Driver"
525 help
526 Say Y here if you want to use the TI USB 3410 or 5052
527 serial devices.
528
529 To compile this driver as a module, choose M here: the
530 module will be called ti_usb_3410_5052.
531
532config USB_SERIAL_CYBERJACK
533 tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader"
534 ---help---
535 Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
536 reader. This is an interface to ISO 7816 compatible contact-based
537 chipcards, e.g. GSM SIMs.
538
539 To compile this driver as a module, choose M here: the
540 module will be called cyberjack.
541
542 If unsure, say N.
543
544config USB_SERIAL_XIRCOM
545 tristate "USB Xircom / Entrega Single Port Serial Driver"
546 select USB_EZUSB_FX2
547 help
548 Say Y here if you want to use a Xircom or Entrega single port USB to
549 serial converter device. This driver makes use of firmware
550 developed from scratch by Brian Warner.
551
552 To compile this driver as a module, choose M here: the
553 module will be called keyspan_pda.
554
555config USB_SERIAL_WWAN
556 tristate
557
558config USB_SERIAL_OPTION
559 tristate "USB driver for GSM and CDMA modems"
560 select USB_SERIAL_WWAN
561 help
562 Say Y here if you have a GSM or CDMA modem that's connected to USB.
563
564 This driver also supports several PCMCIA cards which have a
565 built-in OHCI-USB adapter and an internally-connected GSM modem.
566 The USB bus on these cards is not accessible externally.
567
568 Supported devices include (some of?) those made by:
569 Option, Huawei, Audiovox, Novatel Wireless, or Anydata.
570
571 To compile this driver as a module, choose M here: the
572 module will be called option.
573
574 If this driver doesn't recognize your device,
575 it might be accessible via the FTDI_SIO driver.
576
577config USB_SERIAL_OMNINET
578 tristate "USB ZyXEL omni.net LCD Plus Driver"
579 help
580 Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
581
582 To compile this driver as a module, choose M here: the
583 module will be called omninet.
584
585config USB_SERIAL_OPTICON
586 tristate "USB Opticon Barcode driver (serial mode)"
587 help
588 Say Y here if you want to use a Opticon USB Barcode device
589 in serial emulation mode.
590
591 To compile this driver as a module, choose M here: the
592 module will be called opticon.
593
594config USB_SERIAL_XSENS_MT
595 tristate "Xsens motion tracker serial interface driver"
596 help
597 Say Y here if you want to use Xsens motion trackers.
598
599 This driver supports the new generation of motion trackers
600 by Xsens. Older devices can be accessed using the FTDI_SIO
601 driver.
602
603 To compile this driver as a module, choose M here: the
604 module will be called xsens_mt.
605
606config USB_SERIAL_WISHBONE
607 tristate "USB-Wishbone adapter interface driver"
608 help
609 Say Y here if you want to use a USB attached Wishbone bus.
610
611 Wishbone is an open hardware SoC bus commonly used in FPGA
612 designs. Bus access can be serialized using the Etherbone
613 protocol <http://www.ohwr.org/projects/etherbone-core>.
614
615 This driver is intended to be used with devices which attach
616 their internal Wishbone bus to a USB serial interface using
617 the Etherbone protocol. A userspace library is required to
618 speak the protocol made available by this driver as ttyUSBx.
619
620 To compile this driver as a module, choose M here: the
621 module will be called wishbone-serial.
622
623config USB_SERIAL_SSU100
624 tristate "USB Quatech SSU-100 Single Port Serial Driver"
625 help
626 Say Y here if you want to use the Quatech SSU-100 single
627 port usb to serial adapter.
628
629 To compile this driver as a module, choose M here: the
630 module will be called ssu100.
631
632config USB_SERIAL_QT2
633 tristate "USB Quatech Serial Driver for USB 2 devices"
634 help
635 Say Y here if you want to use the Quatech USB 2
636 serial adapters.
637
638 To compile this driver as a module, choose M here: the
639 module will be called quatech-serial.
640
641config USB_SERIAL_UPD78F0730
642 tristate "USB Renesas uPD78F0730 Single Port Serial Driver"
643 help
644 Say Y here if you want to use the Renesas uPD78F0730
645 serial driver.
646
647 To compile this driver as a module, choose M here: the
648 module will be called upd78f0730.
649
650config USB_SERIAL_DEBUG
651 tristate "USB Debugging Device"
652 help
653 Say Y here if you have a USB debugging device used to receive
654 debugging data from another machine. The most common of these
655 devices is the NetChip TurboCONNECT device.
656
657 To compile this driver as a module, choose M here: the
658 module will be called usb-debug.
659
660endif # USB_SERIAL