Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * DB8500 PRCM Unit driver
4 *
5 * Copyright (C) STMicroelectronics 2009
6 * Copyright (C) ST-Ericsson SA 2010
7 *
8 * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
9 * Author: Sundar Iyer <sundar.iyer@stericsson.com>
10 * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
11 *
12 * U8500 PRCM Unit interface driver
13 */
14#include <linux/init.h>
15#include <linux/export.h>
16#include <linux/kernel.h>
17#include <linux/delay.h>
18#include <linux/errno.h>
19#include <linux/err.h>
20#include <linux/spinlock.h>
21#include <linux/io.h>
22#include <linux/slab.h>
23#include <linux/mutex.h>
24#include <linux/completion.h>
25#include <linux/irq.h>
26#include <linux/jiffies.h>
27#include <linux/bitops.h>
28#include <linux/fs.h>
29#include <linux/of.h>
30#include <linux/of_address.h>
31#include <linux/of_irq.h>
32#include <linux/platform_device.h>
33#include <linux/uaccess.h>
34#include <linux/mfd/core.h>
35#include <linux/mfd/dbx500-prcmu.h>
36#include <linux/mfd/abx500/ab8500.h>
37#include <linux/regulator/db8500-prcmu.h>
38#include <linux/regulator/machine.h>
39#include <linux/platform_data/ux500_wdt.h>
40#include "dbx500-prcmu-regs.h"
41
42/* Index of different voltages to be used when accessing AVSData */
43#define PRCM_AVS_BASE 0x2FC
44#define PRCM_AVS_VBB_RET (PRCM_AVS_BASE + 0x0)
45#define PRCM_AVS_VBB_MAX_OPP (PRCM_AVS_BASE + 0x1)
46#define PRCM_AVS_VBB_100_OPP (PRCM_AVS_BASE + 0x2)
47#define PRCM_AVS_VBB_50_OPP (PRCM_AVS_BASE + 0x3)
48#define PRCM_AVS_VARM_MAX_OPP (PRCM_AVS_BASE + 0x4)
49#define PRCM_AVS_VARM_100_OPP (PRCM_AVS_BASE + 0x5)
50#define PRCM_AVS_VARM_50_OPP (PRCM_AVS_BASE + 0x6)
51#define PRCM_AVS_VARM_RET (PRCM_AVS_BASE + 0x7)
52#define PRCM_AVS_VAPE_100_OPP (PRCM_AVS_BASE + 0x8)
53#define PRCM_AVS_VAPE_50_OPP (PRCM_AVS_BASE + 0x9)
54#define PRCM_AVS_VMOD_100_OPP (PRCM_AVS_BASE + 0xA)
55#define PRCM_AVS_VMOD_50_OPP (PRCM_AVS_BASE + 0xB)
56#define PRCM_AVS_VSAFE (PRCM_AVS_BASE + 0xC)
57
58#define PRCM_AVS_VOLTAGE 0
59#define PRCM_AVS_VOLTAGE_MASK 0x3f
60#define PRCM_AVS_ISSLOWSTARTUP 6
61#define PRCM_AVS_ISSLOWSTARTUP_MASK (1 << PRCM_AVS_ISSLOWSTARTUP)
62#define PRCM_AVS_ISMODEENABLE 7
63#define PRCM_AVS_ISMODEENABLE_MASK (1 << PRCM_AVS_ISMODEENABLE)
64
65#define PRCM_BOOT_STATUS 0xFFF
66#define PRCM_ROMCODE_A2P 0xFFE
67#define PRCM_ROMCODE_P2A 0xFFD
68#define PRCM_XP70_CUR_PWR_STATE 0xFFC /* 4 BYTES */
69
70#define PRCM_SW_RST_REASON 0xFF8 /* 2 bytes */
71
72#define _PRCM_MBOX_HEADER 0xFE8 /* 16 bytes */
73#define PRCM_MBOX_HEADER_REQ_MB0 (_PRCM_MBOX_HEADER + 0x0)
74#define PRCM_MBOX_HEADER_REQ_MB1 (_PRCM_MBOX_HEADER + 0x1)
75#define PRCM_MBOX_HEADER_REQ_MB2 (_PRCM_MBOX_HEADER + 0x2)
76#define PRCM_MBOX_HEADER_REQ_MB3 (_PRCM_MBOX_HEADER + 0x3)
77#define PRCM_MBOX_HEADER_REQ_MB4 (_PRCM_MBOX_HEADER + 0x4)
78#define PRCM_MBOX_HEADER_REQ_MB5 (_PRCM_MBOX_HEADER + 0x5)
79#define PRCM_MBOX_HEADER_ACK_MB0 (_PRCM_MBOX_HEADER + 0x8)
80
81/* Req Mailboxes */
82#define PRCM_REQ_MB0 0xFDC /* 12 bytes */
83#define PRCM_REQ_MB1 0xFD0 /* 12 bytes */
84#define PRCM_REQ_MB2 0xFC0 /* 16 bytes */
85#define PRCM_REQ_MB3 0xE4C /* 372 bytes */
86#define PRCM_REQ_MB4 0xE48 /* 4 bytes */
87#define PRCM_REQ_MB5 0xE44 /* 4 bytes */
88
89/* Ack Mailboxes */
90#define PRCM_ACK_MB0 0xE08 /* 52 bytes */
91#define PRCM_ACK_MB1 0xE04 /* 4 bytes */
92#define PRCM_ACK_MB2 0xE00 /* 4 bytes */
93#define PRCM_ACK_MB3 0xDFC /* 4 bytes */
94#define PRCM_ACK_MB4 0xDF8 /* 4 bytes */
95#define PRCM_ACK_MB5 0xDF4 /* 4 bytes */
96
97/* Mailbox 0 headers */
98#define MB0H_POWER_STATE_TRANS 0
99#define MB0H_CONFIG_WAKEUPS_EXE 1
100#define MB0H_READ_WAKEUP_ACK 3
101#define MB0H_CONFIG_WAKEUPS_SLEEP 4
102
103#define MB0H_WAKEUP_EXE 2
104#define MB0H_WAKEUP_SLEEP 5
105
106/* Mailbox 0 REQs */
107#define PRCM_REQ_MB0_AP_POWER_STATE (PRCM_REQ_MB0 + 0x0)
108#define PRCM_REQ_MB0_AP_PLL_STATE (PRCM_REQ_MB0 + 0x1)
109#define PRCM_REQ_MB0_ULP_CLOCK_STATE (PRCM_REQ_MB0 + 0x2)
110#define PRCM_REQ_MB0_DO_NOT_WFI (PRCM_REQ_MB0 + 0x3)
111#define PRCM_REQ_MB0_WAKEUP_8500 (PRCM_REQ_MB0 + 0x4)
112#define PRCM_REQ_MB0_WAKEUP_4500 (PRCM_REQ_MB0 + 0x8)
113
114/* Mailbox 0 ACKs */
115#define PRCM_ACK_MB0_AP_PWRSTTR_STATUS (PRCM_ACK_MB0 + 0x0)
116#define PRCM_ACK_MB0_READ_POINTER (PRCM_ACK_MB0 + 0x1)
117#define PRCM_ACK_MB0_WAKEUP_0_8500 (PRCM_ACK_MB0 + 0x4)
118#define PRCM_ACK_MB0_WAKEUP_0_4500 (PRCM_ACK_MB0 + 0x8)
119#define PRCM_ACK_MB0_WAKEUP_1_8500 (PRCM_ACK_MB0 + 0x1C)
120#define PRCM_ACK_MB0_WAKEUP_1_4500 (PRCM_ACK_MB0 + 0x20)
121#define PRCM_ACK_MB0_EVENT_4500_NUMBERS 20
122
123/* Mailbox 1 headers */
124#define MB1H_ARM_APE_OPP 0x0
125#define MB1H_RESET_MODEM 0x2
126#define MB1H_REQUEST_APE_OPP_100_VOLT 0x3
127#define MB1H_RELEASE_APE_OPP_100_VOLT 0x4
128#define MB1H_RELEASE_USB_WAKEUP 0x5
129#define MB1H_PLL_ON_OFF 0x6
130
131/* Mailbox 1 Requests */
132#define PRCM_REQ_MB1_ARM_OPP (PRCM_REQ_MB1 + 0x0)
133#define PRCM_REQ_MB1_APE_OPP (PRCM_REQ_MB1 + 0x1)
134#define PRCM_REQ_MB1_PLL_ON_OFF (PRCM_REQ_MB1 + 0x4)
135#define PLL_SOC0_OFF 0x1
136#define PLL_SOC0_ON 0x2
137#define PLL_SOC1_OFF 0x4
138#define PLL_SOC1_ON 0x8
139
140/* Mailbox 1 ACKs */
141#define PRCM_ACK_MB1_CURRENT_ARM_OPP (PRCM_ACK_MB1 + 0x0)
142#define PRCM_ACK_MB1_CURRENT_APE_OPP (PRCM_ACK_MB1 + 0x1)
143#define PRCM_ACK_MB1_APE_VOLTAGE_STATUS (PRCM_ACK_MB1 + 0x2)
144#define PRCM_ACK_MB1_DVFS_STATUS (PRCM_ACK_MB1 + 0x3)
145
146/* Mailbox 2 headers */
147#define MB2H_DPS 0x0
148#define MB2H_AUTO_PWR 0x1
149
150/* Mailbox 2 REQs */
151#define PRCM_REQ_MB2_SVA_MMDSP (PRCM_REQ_MB2 + 0x0)
152#define PRCM_REQ_MB2_SVA_PIPE (PRCM_REQ_MB2 + 0x1)
153#define PRCM_REQ_MB2_SIA_MMDSP (PRCM_REQ_MB2 + 0x2)
154#define PRCM_REQ_MB2_SIA_PIPE (PRCM_REQ_MB2 + 0x3)
155#define PRCM_REQ_MB2_SGA (PRCM_REQ_MB2 + 0x4)
156#define PRCM_REQ_MB2_B2R2_MCDE (PRCM_REQ_MB2 + 0x5)
157#define PRCM_REQ_MB2_ESRAM12 (PRCM_REQ_MB2 + 0x6)
158#define PRCM_REQ_MB2_ESRAM34 (PRCM_REQ_MB2 + 0x7)
159#define PRCM_REQ_MB2_AUTO_PM_SLEEP (PRCM_REQ_MB2 + 0x8)
160#define PRCM_REQ_MB2_AUTO_PM_IDLE (PRCM_REQ_MB2 + 0xC)
161
162/* Mailbox 2 ACKs */
163#define PRCM_ACK_MB2_DPS_STATUS (PRCM_ACK_MB2 + 0x0)
164#define HWACC_PWR_ST_OK 0xFE
165
166/* Mailbox 3 headers */
167#define MB3H_ANC 0x0
168#define MB3H_SIDETONE 0x1
169#define MB3H_SYSCLK 0xE
170
171/* Mailbox 3 Requests */
172#define PRCM_REQ_MB3_ANC_FIR_COEFF (PRCM_REQ_MB3 + 0x0)
173#define PRCM_REQ_MB3_ANC_IIR_COEFF (PRCM_REQ_MB3 + 0x20)
174#define PRCM_REQ_MB3_ANC_SHIFTER (PRCM_REQ_MB3 + 0x60)
175#define PRCM_REQ_MB3_ANC_WARP (PRCM_REQ_MB3 + 0x64)
176#define PRCM_REQ_MB3_SIDETONE_FIR_GAIN (PRCM_REQ_MB3 + 0x68)
177#define PRCM_REQ_MB3_SIDETONE_FIR_COEFF (PRCM_REQ_MB3 + 0x6C)
178#define PRCM_REQ_MB3_SYSCLK_MGT (PRCM_REQ_MB3 + 0x16C)
179
180/* Mailbox 4 headers */
181#define MB4H_DDR_INIT 0x0
182#define MB4H_MEM_ST 0x1
183#define MB4H_HOTDOG 0x12
184#define MB4H_HOTMON 0x13
185#define MB4H_HOT_PERIOD 0x14
186#define MB4H_A9WDOG_CONF 0x16
187#define MB4H_A9WDOG_EN 0x17
188#define MB4H_A9WDOG_DIS 0x18
189#define MB4H_A9WDOG_LOAD 0x19
190#define MB4H_A9WDOG_KICK 0x20
191
192/* Mailbox 4 Requests */
193#define PRCM_REQ_MB4_DDR_ST_AP_SLEEP_IDLE (PRCM_REQ_MB4 + 0x0)
194#define PRCM_REQ_MB4_DDR_ST_AP_DEEP_IDLE (PRCM_REQ_MB4 + 0x1)
195#define PRCM_REQ_MB4_ESRAM0_ST (PRCM_REQ_MB4 + 0x3)
196#define PRCM_REQ_MB4_HOTDOG_THRESHOLD (PRCM_REQ_MB4 + 0x0)
197#define PRCM_REQ_MB4_HOTMON_LOW (PRCM_REQ_MB4 + 0x0)
198#define PRCM_REQ_MB4_HOTMON_HIGH (PRCM_REQ_MB4 + 0x1)
199#define PRCM_REQ_MB4_HOTMON_CONFIG (PRCM_REQ_MB4 + 0x2)
200#define PRCM_REQ_MB4_HOT_PERIOD (PRCM_REQ_MB4 + 0x0)
201#define HOTMON_CONFIG_LOW BIT(0)
202#define HOTMON_CONFIG_HIGH BIT(1)
203#define PRCM_REQ_MB4_A9WDOG_0 (PRCM_REQ_MB4 + 0x0)
204#define PRCM_REQ_MB4_A9WDOG_1 (PRCM_REQ_MB4 + 0x1)
205#define PRCM_REQ_MB4_A9WDOG_2 (PRCM_REQ_MB4 + 0x2)
206#define PRCM_REQ_MB4_A9WDOG_3 (PRCM_REQ_MB4 + 0x3)
207#define A9WDOG_AUTO_OFF_EN BIT(7)
208#define A9WDOG_AUTO_OFF_DIS 0
209#define A9WDOG_ID_MASK 0xf
210
211/* Mailbox 5 Requests */
212#define PRCM_REQ_MB5_I2C_SLAVE_OP (PRCM_REQ_MB5 + 0x0)
213#define PRCM_REQ_MB5_I2C_HW_BITS (PRCM_REQ_MB5 + 0x1)
214#define PRCM_REQ_MB5_I2C_REG (PRCM_REQ_MB5 + 0x2)
215#define PRCM_REQ_MB5_I2C_VAL (PRCM_REQ_MB5 + 0x3)
216#define PRCMU_I2C_WRITE(slave) (((slave) << 1) | BIT(6))
217#define PRCMU_I2C_READ(slave) (((slave) << 1) | BIT(0) | BIT(6))
218#define PRCMU_I2C_STOP_EN BIT(3)
219
220/* Mailbox 5 ACKs */
221#define PRCM_ACK_MB5_I2C_STATUS (PRCM_ACK_MB5 + 0x1)
222#define PRCM_ACK_MB5_I2C_VAL (PRCM_ACK_MB5 + 0x3)
223#define I2C_WR_OK 0x1
224#define I2C_RD_OK 0x2
225
226#define NUM_MB 8
227#define MBOX_BIT BIT
228#define ALL_MBOX_BITS (MBOX_BIT(NUM_MB) - 1)
229
230/*
231 * Wakeups/IRQs
232 */
233
234#define WAKEUP_BIT_RTC BIT(0)
235#define WAKEUP_BIT_RTT0 BIT(1)
236#define WAKEUP_BIT_RTT1 BIT(2)
237#define WAKEUP_BIT_HSI0 BIT(3)
238#define WAKEUP_BIT_HSI1 BIT(4)
239#define WAKEUP_BIT_CA_WAKE BIT(5)
240#define WAKEUP_BIT_USB BIT(6)
241#define WAKEUP_BIT_ABB BIT(7)
242#define WAKEUP_BIT_ABB_FIFO BIT(8)
243#define WAKEUP_BIT_SYSCLK_OK BIT(9)
244#define WAKEUP_BIT_CA_SLEEP BIT(10)
245#define WAKEUP_BIT_AC_WAKE_ACK BIT(11)
246#define WAKEUP_BIT_SIDE_TONE_OK BIT(12)
247#define WAKEUP_BIT_ANC_OK BIT(13)
248#define WAKEUP_BIT_SW_ERROR BIT(14)
249#define WAKEUP_BIT_AC_SLEEP_ACK BIT(15)
250#define WAKEUP_BIT_ARM BIT(17)
251#define WAKEUP_BIT_HOTMON_LOW BIT(18)
252#define WAKEUP_BIT_HOTMON_HIGH BIT(19)
253#define WAKEUP_BIT_MODEM_SW_RESET_REQ BIT(20)
254#define WAKEUP_BIT_GPIO0 BIT(23)
255#define WAKEUP_BIT_GPIO1 BIT(24)
256#define WAKEUP_BIT_GPIO2 BIT(25)
257#define WAKEUP_BIT_GPIO3 BIT(26)
258#define WAKEUP_BIT_GPIO4 BIT(27)
259#define WAKEUP_BIT_GPIO5 BIT(28)
260#define WAKEUP_BIT_GPIO6 BIT(29)
261#define WAKEUP_BIT_GPIO7 BIT(30)
262#define WAKEUP_BIT_GPIO8 BIT(31)
263
264static struct {
265 bool valid;
266 struct prcmu_fw_version version;
267} fw_info;
268
269static struct irq_domain *db8500_irq_domain;
270
271/*
272 * This vector maps irq numbers to the bits in the bit field used in
273 * communication with the PRCMU firmware.
274 *
275 * The reason for having this is to keep the irq numbers contiguous even though
276 * the bits in the bit field are not. (The bits also have a tendency to move
277 * around, to further complicate matters.)
278 */
279#define IRQ_INDEX(_name) ((IRQ_PRCMU_##_name))
280#define IRQ_ENTRY(_name)[IRQ_INDEX(_name)] = (WAKEUP_BIT_##_name)
281
282#define IRQ_PRCMU_RTC 0
283#define IRQ_PRCMU_RTT0 1
284#define IRQ_PRCMU_RTT1 2
285#define IRQ_PRCMU_HSI0 3
286#define IRQ_PRCMU_HSI1 4
287#define IRQ_PRCMU_CA_WAKE 5
288#define IRQ_PRCMU_USB 6
289#define IRQ_PRCMU_ABB 7
290#define IRQ_PRCMU_ABB_FIFO 8
291#define IRQ_PRCMU_ARM 9
292#define IRQ_PRCMU_MODEM_SW_RESET_REQ 10
293#define IRQ_PRCMU_GPIO0 11
294#define IRQ_PRCMU_GPIO1 12
295#define IRQ_PRCMU_GPIO2 13
296#define IRQ_PRCMU_GPIO3 14
297#define IRQ_PRCMU_GPIO4 15
298#define IRQ_PRCMU_GPIO5 16
299#define IRQ_PRCMU_GPIO6 17
300#define IRQ_PRCMU_GPIO7 18
301#define IRQ_PRCMU_GPIO8 19
302#define IRQ_PRCMU_CA_SLEEP 20
303#define IRQ_PRCMU_HOTMON_LOW 21
304#define IRQ_PRCMU_HOTMON_HIGH 22
305#define NUM_PRCMU_WAKEUPS 23
306
307static u32 prcmu_irq_bit[NUM_PRCMU_WAKEUPS] = {
308 IRQ_ENTRY(RTC),
309 IRQ_ENTRY(RTT0),
310 IRQ_ENTRY(RTT1),
311 IRQ_ENTRY(HSI0),
312 IRQ_ENTRY(HSI1),
313 IRQ_ENTRY(CA_WAKE),
314 IRQ_ENTRY(USB),
315 IRQ_ENTRY(ABB),
316 IRQ_ENTRY(ABB_FIFO),
317 IRQ_ENTRY(CA_SLEEP),
318 IRQ_ENTRY(ARM),
319 IRQ_ENTRY(HOTMON_LOW),
320 IRQ_ENTRY(HOTMON_HIGH),
321 IRQ_ENTRY(MODEM_SW_RESET_REQ),
322 IRQ_ENTRY(GPIO0),
323 IRQ_ENTRY(GPIO1),
324 IRQ_ENTRY(GPIO2),
325 IRQ_ENTRY(GPIO3),
326 IRQ_ENTRY(GPIO4),
327 IRQ_ENTRY(GPIO5),
328 IRQ_ENTRY(GPIO6),
329 IRQ_ENTRY(GPIO7),
330 IRQ_ENTRY(GPIO8)
331};
332
333#define VALID_WAKEUPS (BIT(NUM_PRCMU_WAKEUP_INDICES) - 1)
334#define WAKEUP_ENTRY(_name)[PRCMU_WAKEUP_INDEX_##_name] = (WAKEUP_BIT_##_name)
335static u32 prcmu_wakeup_bit[NUM_PRCMU_WAKEUP_INDICES] = {
336 WAKEUP_ENTRY(RTC),
337 WAKEUP_ENTRY(RTT0),
338 WAKEUP_ENTRY(RTT1),
339 WAKEUP_ENTRY(HSI0),
340 WAKEUP_ENTRY(HSI1),
341 WAKEUP_ENTRY(USB),
342 WAKEUP_ENTRY(ABB),
343 WAKEUP_ENTRY(ABB_FIFO),
344 WAKEUP_ENTRY(ARM)
345};
346
347/*
348 * mb0_transfer - state needed for mailbox 0 communication.
349 * @lock: The transaction lock.
350 * @dbb_events_lock: A lock used to handle concurrent access to (parts of)
351 * the request data.
352 * @mask_work: Work structure used for (un)masking wakeup interrupts.
353 * @req: Request data that need to persist between requests.
354 */
355static struct {
356 spinlock_t lock;
357 spinlock_t dbb_irqs_lock;
358 struct work_struct mask_work;
359 struct mutex ac_wake_lock;
360 struct completion ac_wake_work;
361 struct {
362 u32 dbb_irqs;
363 u32 dbb_wakeups;
364 u32 abb_events;
365 } req;
366} mb0_transfer;
367
368/*
369 * mb1_transfer - state needed for mailbox 1 communication.
370 * @lock: The transaction lock.
371 * @work: The transaction completion structure.
372 * @ape_opp: The current APE OPP.
373 * @ack: Reply ("acknowledge") data.
374 */
375static struct {
376 struct mutex lock;
377 struct completion work;
378 u8 ape_opp;
379 struct {
380 u8 header;
381 u8 arm_opp;
382 u8 ape_opp;
383 u8 ape_voltage_status;
384 } ack;
385} mb1_transfer;
386
387/*
388 * mb2_transfer - state needed for mailbox 2 communication.
389 * @lock: The transaction lock.
390 * @work: The transaction completion structure.
391 * @auto_pm_lock: The autonomous power management configuration lock.
392 * @auto_pm_enabled: A flag indicating whether autonomous PM is enabled.
393 * @req: Request data that need to persist between requests.
394 * @ack: Reply ("acknowledge") data.
395 */
396static struct {
397 struct mutex lock;
398 struct completion work;
399 spinlock_t auto_pm_lock;
400 bool auto_pm_enabled;
401 struct {
402 u8 status;
403 } ack;
404} mb2_transfer;
405
406/*
407 * mb3_transfer - state needed for mailbox 3 communication.
408 * @lock: The request lock.
409 * @sysclk_lock: A lock used to handle concurrent sysclk requests.
410 * @sysclk_work: Work structure used for sysclk requests.
411 */
412static struct {
413 spinlock_t lock;
414 struct mutex sysclk_lock;
415 struct completion sysclk_work;
416} mb3_transfer;
417
418/*
419 * mb4_transfer - state needed for mailbox 4 communication.
420 * @lock: The transaction lock.
421 * @work: The transaction completion structure.
422 */
423static struct {
424 struct mutex lock;
425 struct completion work;
426} mb4_transfer;
427
428/*
429 * mb5_transfer - state needed for mailbox 5 communication.
430 * @lock: The transaction lock.
431 * @work: The transaction completion structure.
432 * @ack: Reply ("acknowledge") data.
433 */
434static struct {
435 struct mutex lock;
436 struct completion work;
437 struct {
438 u8 status;
439 u8 value;
440 } ack;
441} mb5_transfer;
442
443static atomic_t ac_wake_req_state = ATOMIC_INIT(0);
444
445/* Spinlocks */
446static DEFINE_SPINLOCK(prcmu_lock);
447static DEFINE_SPINLOCK(clkout_lock);
448
449/* Global var to runtime determine TCDM base for v2 or v1 */
450static __iomem void *tcdm_base;
451static __iomem void *prcmu_base;
452
453struct clk_mgt {
454 u32 offset;
455 u32 pllsw;
456 int branch;
457 bool clk38div;
458};
459
460enum {
461 PLL_RAW,
462 PLL_FIX,
463 PLL_DIV
464};
465
466static DEFINE_SPINLOCK(clk_mgt_lock);
467
468#define CLK_MGT_ENTRY(_name, _branch, _clk38div)[PRCMU_##_name] = \
469 { (PRCM_##_name##_MGT), 0 , _branch, _clk38div}
470static struct clk_mgt clk_mgt[PRCMU_NUM_REG_CLOCKS] = {
471 CLK_MGT_ENTRY(SGACLK, PLL_DIV, false),
472 CLK_MGT_ENTRY(UARTCLK, PLL_FIX, true),
473 CLK_MGT_ENTRY(MSP02CLK, PLL_FIX, true),
474 CLK_MGT_ENTRY(MSP1CLK, PLL_FIX, true),
475 CLK_MGT_ENTRY(I2CCLK, PLL_FIX, true),
476 CLK_MGT_ENTRY(SDMMCCLK, PLL_DIV, true),
477 CLK_MGT_ENTRY(SLIMCLK, PLL_FIX, true),
478 CLK_MGT_ENTRY(PER1CLK, PLL_DIV, true),
479 CLK_MGT_ENTRY(PER2CLK, PLL_DIV, true),
480 CLK_MGT_ENTRY(PER3CLK, PLL_DIV, true),
481 CLK_MGT_ENTRY(PER5CLK, PLL_DIV, true),
482 CLK_MGT_ENTRY(PER6CLK, PLL_DIV, true),
483 CLK_MGT_ENTRY(PER7CLK, PLL_DIV, true),
484 CLK_MGT_ENTRY(LCDCLK, PLL_FIX, true),
485 CLK_MGT_ENTRY(BMLCLK, PLL_DIV, true),
486 CLK_MGT_ENTRY(HSITXCLK, PLL_DIV, true),
487 CLK_MGT_ENTRY(HSIRXCLK, PLL_DIV, true),
488 CLK_MGT_ENTRY(HDMICLK, PLL_FIX, false),
489 CLK_MGT_ENTRY(APEATCLK, PLL_DIV, true),
490 CLK_MGT_ENTRY(APETRACECLK, PLL_DIV, true),
491 CLK_MGT_ENTRY(MCDECLK, PLL_DIV, true),
492 CLK_MGT_ENTRY(IPI2CCLK, PLL_FIX, true),
493 CLK_MGT_ENTRY(DSIALTCLK, PLL_FIX, false),
494 CLK_MGT_ENTRY(DMACLK, PLL_DIV, true),
495 CLK_MGT_ENTRY(B2R2CLK, PLL_DIV, true),
496 CLK_MGT_ENTRY(TVCLK, PLL_FIX, true),
497 CLK_MGT_ENTRY(SSPCLK, PLL_FIX, true),
498 CLK_MGT_ENTRY(RNGCLK, PLL_FIX, true),
499 CLK_MGT_ENTRY(UICCCLK, PLL_FIX, false),
500};
501
502struct dsiclk {
503 u32 divsel_mask;
504 u32 divsel_shift;
505 u32 divsel;
506};
507
508static struct dsiclk dsiclk[2] = {
509 {
510 .divsel_mask = PRCM_DSI_PLLOUT_SEL_DSI0_PLLOUT_DIVSEL_MASK,
511 .divsel_shift = PRCM_DSI_PLLOUT_SEL_DSI0_PLLOUT_DIVSEL_SHIFT,
512 .divsel = PRCM_DSI_PLLOUT_SEL_PHI,
513 },
514 {
515 .divsel_mask = PRCM_DSI_PLLOUT_SEL_DSI1_PLLOUT_DIVSEL_MASK,
516 .divsel_shift = PRCM_DSI_PLLOUT_SEL_DSI1_PLLOUT_DIVSEL_SHIFT,
517 .divsel = PRCM_DSI_PLLOUT_SEL_PHI,
518 }
519};
520
521struct dsiescclk {
522 u32 en;
523 u32 div_mask;
524 u32 div_shift;
525};
526
527static struct dsiescclk dsiescclk[3] = {
528 {
529 .en = PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_EN,
530 .div_mask = PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_DIV_MASK,
531 .div_shift = PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_DIV_SHIFT,
532 },
533 {
534 .en = PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_EN,
535 .div_mask = PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_DIV_MASK,
536 .div_shift = PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_DIV_SHIFT,
537 },
538 {
539 .en = PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_EN,
540 .div_mask = PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_DIV_MASK,
541 .div_shift = PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_DIV_SHIFT,
542 }
543};
544
545u32 db8500_prcmu_read(unsigned int reg)
546{
547 return readl(prcmu_base + reg);
548}
549
550void db8500_prcmu_write(unsigned int reg, u32 value)
551{
552 unsigned long flags;
553
554 spin_lock_irqsave(&prcmu_lock, flags);
555 writel(value, (prcmu_base + reg));
556 spin_unlock_irqrestore(&prcmu_lock, flags);
557}
558
559void db8500_prcmu_write_masked(unsigned int reg, u32 mask, u32 value)
560{
561 u32 val;
562 unsigned long flags;
563
564 spin_lock_irqsave(&prcmu_lock, flags);
565 val = readl(prcmu_base + reg);
566 val = ((val & ~mask) | (value & mask));
567 writel(val, (prcmu_base + reg));
568 spin_unlock_irqrestore(&prcmu_lock, flags);
569}
570
571struct prcmu_fw_version *prcmu_get_fw_version(void)
572{
573 return fw_info.valid ? &fw_info.version : NULL;
574}
575
576static bool prcmu_is_ulppll_disabled(void)
577{
578 struct prcmu_fw_version *ver;
579
580 ver = prcmu_get_fw_version();
581 return ver && ver->project == PRCMU_FW_PROJECT_U8420_SYSCLK;
582}
583
584bool prcmu_has_arm_maxopp(void)
585{
586 return (readb(tcdm_base + PRCM_AVS_VARM_MAX_OPP) &
587 PRCM_AVS_ISMODEENABLE_MASK) == PRCM_AVS_ISMODEENABLE_MASK;
588}
589
590/**
591 * prcmu_set_rc_a2p - This function is used to run few power state sequences
592 * @val: Value to be set, i.e. transition requested
593 * Returns: 0 on success, -EINVAL on invalid argument
594 *
595 * This function is used to run the following power state sequences -
596 * any state to ApReset, ApDeepSleep to ApExecute, ApExecute to ApDeepSleep
597 */
598int prcmu_set_rc_a2p(enum romcode_write val)
599{
600 if (val < RDY_2_DS || val > RDY_2_XP70_RST)
601 return -EINVAL;
602 writeb(val, (tcdm_base + PRCM_ROMCODE_A2P));
603 return 0;
604}
605
606/**
607 * prcmu_get_rc_p2a - This function is used to get power state sequences
608 * Returns: the power transition that has last happened
609 *
610 * This function can return the following transitions-
611 * any state to ApReset, ApDeepSleep to ApExecute, ApExecute to ApDeepSleep
612 */
613enum romcode_read prcmu_get_rc_p2a(void)
614{
615 return readb(tcdm_base + PRCM_ROMCODE_P2A);
616}
617
618/**
619 * prcmu_get_current_mode - Return the current XP70 power mode
620 * Returns: Returns the current AP(ARM) power mode: init,
621 * apBoot, apExecute, apDeepSleep, apSleep, apIdle, apReset
622 */
623enum ap_pwrst prcmu_get_xp70_current_state(void)
624{
625 return readb(tcdm_base + PRCM_XP70_CUR_PWR_STATE);
626}
627
628/**
629 * prcmu_config_clkout - Configure one of the programmable clock outputs.
630 * @clkout: The CLKOUT number (0 or 1).
631 * @source: The clock to be used (one of the PRCMU_CLKSRC_*).
632 * @div: The divider to be applied.
633 *
634 * Configures one of the programmable clock outputs (CLKOUTs).
635 * @div should be in the range [1,63] to request a configuration, or 0 to
636 * inform that the configuration is no longer requested.
637 */
638int prcmu_config_clkout(u8 clkout, u8 source, u8 div)
639{
640 static int requests[2];
641 int r = 0;
642 unsigned long flags;
643 u32 val;
644 u32 bits;
645 u32 mask;
646 u32 div_mask;
647
648 BUG_ON(clkout > 1);
649 BUG_ON(div > 63);
650 BUG_ON((clkout == 0) && (source > PRCMU_CLKSRC_CLK009));
651
652 if (!div && !requests[clkout])
653 return -EINVAL;
654
655 if (clkout == 0) {
656 div_mask = PRCM_CLKOCR_CLKODIV0_MASK;
657 mask = (PRCM_CLKOCR_CLKODIV0_MASK | PRCM_CLKOCR_CLKOSEL0_MASK);
658 bits = ((source << PRCM_CLKOCR_CLKOSEL0_SHIFT) |
659 (div << PRCM_CLKOCR_CLKODIV0_SHIFT));
660 } else {
661 div_mask = PRCM_CLKOCR_CLKODIV1_MASK;
662 mask = (PRCM_CLKOCR_CLKODIV1_MASK | PRCM_CLKOCR_CLKOSEL1_MASK |
663 PRCM_CLKOCR_CLK1TYPE);
664 bits = ((source << PRCM_CLKOCR_CLKOSEL1_SHIFT) |
665 (div << PRCM_CLKOCR_CLKODIV1_SHIFT));
666 }
667 bits &= mask;
668
669 spin_lock_irqsave(&clkout_lock, flags);
670
671 val = readl(PRCM_CLKOCR);
672 if (val & div_mask) {
673 if (div) {
674 if ((val & mask) != bits) {
675 r = -EBUSY;
676 goto unlock_and_return;
677 }
678 } else {
679 if ((val & mask & ~div_mask) != bits) {
680 r = -EINVAL;
681 goto unlock_and_return;
682 }
683 }
684 }
685 writel((bits | (val & ~mask)), PRCM_CLKOCR);
686 requests[clkout] += (div ? 1 : -1);
687
688unlock_and_return:
689 spin_unlock_irqrestore(&clkout_lock, flags);
690
691 return r;
692}
693
694int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll)
695{
696 unsigned long flags;
697
698 BUG_ON((state < PRCMU_AP_SLEEP) || (PRCMU_AP_DEEP_IDLE < state));
699
700 spin_lock_irqsave(&mb0_transfer.lock, flags);
701
702 while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
703 cpu_relax();
704
705 writeb(MB0H_POWER_STATE_TRANS, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0));
706 writeb(state, (tcdm_base + PRCM_REQ_MB0_AP_POWER_STATE));
707 writeb((keep_ap_pll ? 1 : 0), (tcdm_base + PRCM_REQ_MB0_AP_PLL_STATE));
708 writeb((keep_ulp_clk ? 1 : 0),
709 (tcdm_base + PRCM_REQ_MB0_ULP_CLOCK_STATE));
710 writeb(0, (tcdm_base + PRCM_REQ_MB0_DO_NOT_WFI));
711 writel(MBOX_BIT(0), PRCM_MBOX_CPU_SET);
712
713 spin_unlock_irqrestore(&mb0_transfer.lock, flags);
714
715 return 0;
716}
717
718u8 db8500_prcmu_get_power_state_result(void)
719{
720 return readb(tcdm_base + PRCM_ACK_MB0_AP_PWRSTTR_STATUS);
721}
722
723/* This function should only be called while mb0_transfer.lock is held. */
724static void config_wakeups(void)
725{
726 const u8 header[2] = {
727 MB0H_CONFIG_WAKEUPS_EXE,
728 MB0H_CONFIG_WAKEUPS_SLEEP
729 };
730 static u32 last_dbb_events;
731 static u32 last_abb_events;
732 u32 dbb_events;
733 u32 abb_events;
734 unsigned int i;
735
736 dbb_events = mb0_transfer.req.dbb_irqs | mb0_transfer.req.dbb_wakeups;
737 dbb_events |= (WAKEUP_BIT_AC_WAKE_ACK | WAKEUP_BIT_AC_SLEEP_ACK);
738
739 abb_events = mb0_transfer.req.abb_events;
740
741 if ((dbb_events == last_dbb_events) && (abb_events == last_abb_events))
742 return;
743
744 for (i = 0; i < 2; i++) {
745 while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
746 cpu_relax();
747 writel(dbb_events, (tcdm_base + PRCM_REQ_MB0_WAKEUP_8500));
748 writel(abb_events, (tcdm_base + PRCM_REQ_MB0_WAKEUP_4500));
749 writeb(header[i], (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0));
750 writel(MBOX_BIT(0), PRCM_MBOX_CPU_SET);
751 }
752 last_dbb_events = dbb_events;
753 last_abb_events = abb_events;
754}
755
756void db8500_prcmu_enable_wakeups(u32 wakeups)
757{
758 unsigned long flags;
759 u32 bits;
760 int i;
761
762 BUG_ON(wakeups != (wakeups & VALID_WAKEUPS));
763
764 for (i = 0, bits = 0; i < NUM_PRCMU_WAKEUP_INDICES; i++) {
765 if (wakeups & BIT(i))
766 bits |= prcmu_wakeup_bit[i];
767 }
768
769 spin_lock_irqsave(&mb0_transfer.lock, flags);
770
771 mb0_transfer.req.dbb_wakeups = bits;
772 config_wakeups();
773
774 spin_unlock_irqrestore(&mb0_transfer.lock, flags);
775}
776
777void db8500_prcmu_config_abb_event_readout(u32 abb_events)
778{
779 unsigned long flags;
780
781 spin_lock_irqsave(&mb0_transfer.lock, flags);
782
783 mb0_transfer.req.abb_events = abb_events;
784 config_wakeups();
785
786 spin_unlock_irqrestore(&mb0_transfer.lock, flags);
787}
788
789void db8500_prcmu_get_abb_event_buffer(void __iomem **buf)
790{
791 if (readb(tcdm_base + PRCM_ACK_MB0_READ_POINTER) & 1)
792 *buf = (tcdm_base + PRCM_ACK_MB0_WAKEUP_1_4500);
793 else
794 *buf = (tcdm_base + PRCM_ACK_MB0_WAKEUP_0_4500);
795}
796
797/**
798 * db8500_prcmu_set_arm_opp - set the appropriate ARM OPP
799 * @opp: The new ARM operating point to which transition is to be made
800 * Returns: 0 on success, non-zero on failure
801 *
802 * This function sets the the operating point of the ARM.
803 */
804int db8500_prcmu_set_arm_opp(u8 opp)
805{
806 int r;
807
808 if (opp < ARM_NO_CHANGE || opp > ARM_EXTCLK)
809 return -EINVAL;
810
811 r = 0;
812
813 mutex_lock(&mb1_transfer.lock);
814
815 while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
816 cpu_relax();
817
818 writeb(MB1H_ARM_APE_OPP, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
819 writeb(opp, (tcdm_base + PRCM_REQ_MB1_ARM_OPP));
820 writeb(APE_NO_CHANGE, (tcdm_base + PRCM_REQ_MB1_APE_OPP));
821
822 writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
823 wait_for_completion(&mb1_transfer.work);
824
825 if ((mb1_transfer.ack.header != MB1H_ARM_APE_OPP) ||
826 (mb1_transfer.ack.arm_opp != opp))
827 r = -EIO;
828
829 mutex_unlock(&mb1_transfer.lock);
830
831 return r;
832}
833
834/**
835 * db8500_prcmu_get_arm_opp - get the current ARM OPP
836 *
837 * Returns: the current ARM OPP
838 */
839int db8500_prcmu_get_arm_opp(void)
840{
841 return readb(tcdm_base + PRCM_ACK_MB1_CURRENT_ARM_OPP);
842}
843
844/**
845 * db8500_prcmu_get_ddr_opp - get the current DDR OPP
846 *
847 * Returns: the current DDR OPP
848 */
849int db8500_prcmu_get_ddr_opp(void)
850{
851 return readb(PRCM_DDR_SUBSYS_APE_MINBW);
852}
853
854/* Divide the frequency of certain clocks by 2 for APE_50_PARTLY_25_OPP. */
855static void request_even_slower_clocks(bool enable)
856{
857 u32 clock_reg[] = {
858 PRCM_ACLK_MGT,
859 PRCM_DMACLK_MGT
860 };
861 unsigned long flags;
862 unsigned int i;
863
864 spin_lock_irqsave(&clk_mgt_lock, flags);
865
866 /* Grab the HW semaphore. */
867 while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
868 cpu_relax();
869
870 for (i = 0; i < ARRAY_SIZE(clock_reg); i++) {
871 u32 val;
872 u32 div;
873
874 val = readl(prcmu_base + clock_reg[i]);
875 div = (val & PRCM_CLK_MGT_CLKPLLDIV_MASK);
876 if (enable) {
877 if ((div <= 1) || (div > 15)) {
878 pr_err("prcmu: Bad clock divider %d in %s\n",
879 div, __func__);
880 goto unlock_and_return;
881 }
882 div <<= 1;
883 } else {
884 if (div <= 2)
885 goto unlock_and_return;
886 div >>= 1;
887 }
888 val = ((val & ~PRCM_CLK_MGT_CLKPLLDIV_MASK) |
889 (div & PRCM_CLK_MGT_CLKPLLDIV_MASK));
890 writel(val, prcmu_base + clock_reg[i]);
891 }
892
893unlock_and_return:
894 /* Release the HW semaphore. */
895 writel(0, PRCM_SEM);
896
897 spin_unlock_irqrestore(&clk_mgt_lock, flags);
898}
899
900/**
901 * db8500_set_ape_opp - set the appropriate APE OPP
902 * @opp: The new APE operating point to which transition is to be made
903 * Returns: 0 on success, non-zero on failure
904 *
905 * This function sets the operating point of the APE.
906 */
907int db8500_prcmu_set_ape_opp(u8 opp)
908{
909 int r = 0;
910
911 if (opp == mb1_transfer.ape_opp)
912 return 0;
913
914 mutex_lock(&mb1_transfer.lock);
915
916 if (mb1_transfer.ape_opp == APE_50_PARTLY_25_OPP)
917 request_even_slower_clocks(false);
918
919 if ((opp != APE_100_OPP) && (mb1_transfer.ape_opp != APE_100_OPP))
920 goto skip_message;
921
922 while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
923 cpu_relax();
924
925 writeb(MB1H_ARM_APE_OPP, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
926 writeb(ARM_NO_CHANGE, (tcdm_base + PRCM_REQ_MB1_ARM_OPP));
927 writeb(((opp == APE_50_PARTLY_25_OPP) ? APE_50_OPP : opp),
928 (tcdm_base + PRCM_REQ_MB1_APE_OPP));
929
930 writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
931 wait_for_completion(&mb1_transfer.work);
932
933 if ((mb1_transfer.ack.header != MB1H_ARM_APE_OPP) ||
934 (mb1_transfer.ack.ape_opp != opp))
935 r = -EIO;
936
937skip_message:
938 if ((!r && (opp == APE_50_PARTLY_25_OPP)) ||
939 (r && (mb1_transfer.ape_opp == APE_50_PARTLY_25_OPP)))
940 request_even_slower_clocks(true);
941 if (!r)
942 mb1_transfer.ape_opp = opp;
943
944 mutex_unlock(&mb1_transfer.lock);
945
946 return r;
947}
948
949/**
950 * db8500_prcmu_get_ape_opp - get the current APE OPP
951 *
952 * Returns: the current APE OPP
953 */
954int db8500_prcmu_get_ape_opp(void)
955{
956 return readb(tcdm_base + PRCM_ACK_MB1_CURRENT_APE_OPP);
957}
958
959/**
960 * db8500_prcmu_request_ape_opp_100_voltage - Request APE OPP 100% voltage
961 * @enable: true to request the higher voltage, false to drop a request.
962 *
963 * Calls to this function to enable and disable requests must be balanced.
964 */
965int db8500_prcmu_request_ape_opp_100_voltage(bool enable)
966{
967 int r = 0;
968 u8 header;
969 static unsigned int requests;
970
971 mutex_lock(&mb1_transfer.lock);
972
973 if (enable) {
974 if (0 != requests++)
975 goto unlock_and_return;
976 header = MB1H_REQUEST_APE_OPP_100_VOLT;
977 } else {
978 if (requests == 0) {
979 r = -EIO;
980 goto unlock_and_return;
981 } else if (1 != requests--) {
982 goto unlock_and_return;
983 }
984 header = MB1H_RELEASE_APE_OPP_100_VOLT;
985 }
986
987 while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
988 cpu_relax();
989
990 writeb(header, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
991
992 writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
993 wait_for_completion(&mb1_transfer.work);
994
995 if ((mb1_transfer.ack.header != header) ||
996 ((mb1_transfer.ack.ape_voltage_status & BIT(0)) != 0))
997 r = -EIO;
998
999unlock_and_return:
1000 mutex_unlock(&mb1_transfer.lock);
1001
1002 return r;
1003}
1004
1005/**
1006 * prcmu_release_usb_wakeup_state - release the state required by a USB wakeup
1007 *
1008 * This function releases the power state requirements of a USB wakeup.
1009 */
1010int prcmu_release_usb_wakeup_state(void)
1011{
1012 int r = 0;
1013
1014 mutex_lock(&mb1_transfer.lock);
1015
1016 while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
1017 cpu_relax();
1018
1019 writeb(MB1H_RELEASE_USB_WAKEUP,
1020 (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
1021
1022 writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
1023 wait_for_completion(&mb1_transfer.work);
1024
1025 if ((mb1_transfer.ack.header != MB1H_RELEASE_USB_WAKEUP) ||
1026 ((mb1_transfer.ack.ape_voltage_status & BIT(0)) != 0))
1027 r = -EIO;
1028
1029 mutex_unlock(&mb1_transfer.lock);
1030
1031 return r;
1032}
1033
1034static int request_pll(u8 clock, bool enable)
1035{
1036 int r = 0;
1037
1038 if (clock == PRCMU_PLLSOC0)
1039 clock = (enable ? PLL_SOC0_ON : PLL_SOC0_OFF);
1040 else if (clock == PRCMU_PLLSOC1)
1041 clock = (enable ? PLL_SOC1_ON : PLL_SOC1_OFF);
1042 else
1043 return -EINVAL;
1044
1045 mutex_lock(&mb1_transfer.lock);
1046
1047 while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
1048 cpu_relax();
1049
1050 writeb(MB1H_PLL_ON_OFF, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
1051 writeb(clock, (tcdm_base + PRCM_REQ_MB1_PLL_ON_OFF));
1052
1053 writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
1054 wait_for_completion(&mb1_transfer.work);
1055
1056 if (mb1_transfer.ack.header != MB1H_PLL_ON_OFF)
1057 r = -EIO;
1058
1059 mutex_unlock(&mb1_transfer.lock);
1060
1061 return r;
1062}
1063
1064/**
1065 * db8500_prcmu_set_epod - set the state of a EPOD (power domain)
1066 * @epod_id: The EPOD to set
1067 * @epod_state: The new EPOD state
1068 *
1069 * This function sets the state of a EPOD (power domain). It may not be called
1070 * from interrupt context.
1071 */
1072int db8500_prcmu_set_epod(u16 epod_id, u8 epod_state)
1073{
1074 int r = 0;
1075 bool ram_retention = false;
1076 int i;
1077
1078 /* check argument */
1079 BUG_ON(epod_id >= NUM_EPOD_ID);
1080
1081 /* set flag if retention is possible */
1082 switch (epod_id) {
1083 case EPOD_ID_SVAMMDSP:
1084 case EPOD_ID_SIAMMDSP:
1085 case EPOD_ID_ESRAM12:
1086 case EPOD_ID_ESRAM34:
1087 ram_retention = true;
1088 break;
1089 }
1090
1091 /* check argument */
1092 BUG_ON(epod_state > EPOD_STATE_ON);
1093 BUG_ON(epod_state == EPOD_STATE_RAMRET && !ram_retention);
1094
1095 /* get lock */
1096 mutex_lock(&mb2_transfer.lock);
1097
1098 /* wait for mailbox */
1099 while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(2))
1100 cpu_relax();
1101
1102 /* fill in mailbox */
1103 for (i = 0; i < NUM_EPOD_ID; i++)
1104 writeb(EPOD_STATE_NO_CHANGE, (tcdm_base + PRCM_REQ_MB2 + i));
1105 writeb(epod_state, (tcdm_base + PRCM_REQ_MB2 + epod_id));
1106
1107 writeb(MB2H_DPS, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB2));
1108
1109 writel(MBOX_BIT(2), PRCM_MBOX_CPU_SET);
1110
1111 /*
1112 * The current firmware version does not handle errors correctly,
1113 * and we cannot recover if there is an error.
1114 * This is expected to change when the firmware is updated.
1115 */
1116 if (!wait_for_completion_timeout(&mb2_transfer.work,
1117 msecs_to_jiffies(20000))) {
1118 pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",
1119 __func__);
1120 r = -EIO;
1121 goto unlock_and_return;
1122 }
1123
1124 if (mb2_transfer.ack.status != HWACC_PWR_ST_OK)
1125 r = -EIO;
1126
1127unlock_and_return:
1128 mutex_unlock(&mb2_transfer.lock);
1129 return r;
1130}
1131
1132/**
1133 * prcmu_configure_auto_pm - Configure autonomous power management.
1134 * @sleep: Configuration for ApSleep.
1135 * @idle: Configuration for ApIdle.
1136 */
1137void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep,
1138 struct prcmu_auto_pm_config *idle)
1139{
1140 u32 sleep_cfg;
1141 u32 idle_cfg;
1142 unsigned long flags;
1143
1144 BUG_ON((sleep == NULL) || (idle == NULL));
1145
1146 sleep_cfg = (sleep->sva_auto_pm_enable & 0xF);
1147 sleep_cfg = ((sleep_cfg << 4) | (sleep->sia_auto_pm_enable & 0xF));
1148 sleep_cfg = ((sleep_cfg << 8) | (sleep->sva_power_on & 0xFF));
1149 sleep_cfg = ((sleep_cfg << 8) | (sleep->sia_power_on & 0xFF));
1150 sleep_cfg = ((sleep_cfg << 4) | (sleep->sva_policy & 0xF));
1151 sleep_cfg = ((sleep_cfg << 4) | (sleep->sia_policy & 0xF));
1152
1153 idle_cfg = (idle->sva_auto_pm_enable & 0xF);
1154 idle_cfg = ((idle_cfg << 4) | (idle->sia_auto_pm_enable & 0xF));
1155 idle_cfg = ((idle_cfg << 8) | (idle->sva_power_on & 0xFF));
1156 idle_cfg = ((idle_cfg << 8) | (idle->sia_power_on & 0xFF));
1157 idle_cfg = ((idle_cfg << 4) | (idle->sva_policy & 0xF));
1158 idle_cfg = ((idle_cfg << 4) | (idle->sia_policy & 0xF));
1159
1160 spin_lock_irqsave(&mb2_transfer.auto_pm_lock, flags);
1161
1162 /*
1163 * The autonomous power management configuration is done through
1164 * fields in mailbox 2, but these fields are only used as shared
1165 * variables - i.e. there is no need to send a message.
1166 */
1167 writel(sleep_cfg, (tcdm_base + PRCM_REQ_MB2_AUTO_PM_SLEEP));
1168 writel(idle_cfg, (tcdm_base + PRCM_REQ_MB2_AUTO_PM_IDLE));
1169
1170 mb2_transfer.auto_pm_enabled =
1171 ((sleep->sva_auto_pm_enable == PRCMU_AUTO_PM_ON) ||
1172 (sleep->sia_auto_pm_enable == PRCMU_AUTO_PM_ON) ||
1173 (idle->sva_auto_pm_enable == PRCMU_AUTO_PM_ON) ||
1174 (idle->sia_auto_pm_enable == PRCMU_AUTO_PM_ON));
1175
1176 spin_unlock_irqrestore(&mb2_transfer.auto_pm_lock, flags);
1177}
1178EXPORT_SYMBOL(prcmu_configure_auto_pm);
1179
1180bool prcmu_is_auto_pm_enabled(void)
1181{
1182 return mb2_transfer.auto_pm_enabled;
1183}
1184
1185static int request_sysclk(bool enable)
1186{
1187 int r;
1188 unsigned long flags;
1189
1190 r = 0;
1191
1192 mutex_lock(&mb3_transfer.sysclk_lock);
1193
1194 spin_lock_irqsave(&mb3_transfer.lock, flags);
1195
1196 while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(3))
1197 cpu_relax();
1198
1199 writeb((enable ? ON : OFF), (tcdm_base + PRCM_REQ_MB3_SYSCLK_MGT));
1200
1201 writeb(MB3H_SYSCLK, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB3));
1202 writel(MBOX_BIT(3), PRCM_MBOX_CPU_SET);
1203
1204 spin_unlock_irqrestore(&mb3_transfer.lock, flags);
1205
1206 /*
1207 * The firmware only sends an ACK if we want to enable the
1208 * SysClk, and it succeeds.
1209 */
1210 if (enable && !wait_for_completion_timeout(&mb3_transfer.sysclk_work,
1211 msecs_to_jiffies(20000))) {
1212 pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",
1213 __func__);
1214 r = -EIO;
1215 }
1216
1217 mutex_unlock(&mb3_transfer.sysclk_lock);
1218
1219 return r;
1220}
1221
1222static int request_timclk(bool enable)
1223{
1224 u32 val;
1225
1226 /*
1227 * On the U8420_CLKSEL firmware, the ULP (Ultra Low Power)
1228 * PLL is disabled so we cannot use doze mode, this will
1229 * stop the clock on this firmware.
1230 */
1231 if (prcmu_is_ulppll_disabled())
1232 val = 0;
1233 else
1234 val = (PRCM_TCR_DOZE_MODE | PRCM_TCR_TENSEL_MASK);
1235
1236 if (!enable)
1237 val |= PRCM_TCR_STOP_TIMERS |
1238 PRCM_TCR_DOZE_MODE |
1239 PRCM_TCR_TENSEL_MASK;
1240
1241 writel(val, PRCM_TCR);
1242
1243 return 0;
1244}
1245
1246static int request_clock(u8 clock, bool enable)
1247{
1248 u32 val;
1249 unsigned long flags;
1250
1251 spin_lock_irqsave(&clk_mgt_lock, flags);
1252
1253 /* Grab the HW semaphore. */
1254 while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
1255 cpu_relax();
1256
1257 val = readl(prcmu_base + clk_mgt[clock].offset);
1258 if (enable) {
1259 val |= (PRCM_CLK_MGT_CLKEN | clk_mgt[clock].pllsw);
1260 } else {
1261 clk_mgt[clock].pllsw = (val & PRCM_CLK_MGT_CLKPLLSW_MASK);
1262 val &= ~(PRCM_CLK_MGT_CLKEN | PRCM_CLK_MGT_CLKPLLSW_MASK);
1263 }
1264 writel(val, prcmu_base + clk_mgt[clock].offset);
1265
1266 /* Release the HW semaphore. */
1267 writel(0, PRCM_SEM);
1268
1269 spin_unlock_irqrestore(&clk_mgt_lock, flags);
1270
1271 return 0;
1272}
1273
1274static int request_sga_clock(u8 clock, bool enable)
1275{
1276 u32 val;
1277 int ret;
1278
1279 if (enable) {
1280 val = readl(PRCM_CGATING_BYPASS);
1281 writel(val | PRCM_CGATING_BYPASS_ICN2, PRCM_CGATING_BYPASS);
1282 }
1283
1284 ret = request_clock(clock, enable);
1285
1286 if (!ret && !enable) {
1287 val = readl(PRCM_CGATING_BYPASS);
1288 writel(val & ~PRCM_CGATING_BYPASS_ICN2, PRCM_CGATING_BYPASS);
1289 }
1290
1291 return ret;
1292}
1293
1294static inline bool plldsi_locked(void)
1295{
1296 return (readl(PRCM_PLLDSI_LOCKP) &
1297 (PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP10 |
1298 PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP3)) ==
1299 (PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP10 |
1300 PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP3);
1301}
1302
1303static int request_plldsi(bool enable)
1304{
1305 int r = 0;
1306 u32 val;
1307
1308 writel((PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMP |
1309 PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMPI), (enable ?
1310 PRCM_MMIP_LS_CLAMP_CLR : PRCM_MMIP_LS_CLAMP_SET));
1311
1312 val = readl(PRCM_PLLDSI_ENABLE);
1313 if (enable)
1314 val |= PRCM_PLLDSI_ENABLE_PRCM_PLLDSI_ENABLE;
1315 else
1316 val &= ~PRCM_PLLDSI_ENABLE_PRCM_PLLDSI_ENABLE;
1317 writel(val, PRCM_PLLDSI_ENABLE);
1318
1319 if (enable) {
1320 unsigned int i;
1321 bool locked = plldsi_locked();
1322
1323 for (i = 10; !locked && (i > 0); --i) {
1324 udelay(100);
1325 locked = plldsi_locked();
1326 }
1327 if (locked) {
1328 writel(PRCM_APE_RESETN_DSIPLL_RESETN,
1329 PRCM_APE_RESETN_SET);
1330 } else {
1331 writel((PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMP |
1332 PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMPI),
1333 PRCM_MMIP_LS_CLAMP_SET);
1334 val &= ~PRCM_PLLDSI_ENABLE_PRCM_PLLDSI_ENABLE;
1335 writel(val, PRCM_PLLDSI_ENABLE);
1336 r = -EAGAIN;
1337 }
1338 } else {
1339 writel(PRCM_APE_RESETN_DSIPLL_RESETN, PRCM_APE_RESETN_CLR);
1340 }
1341 return r;
1342}
1343
1344static int request_dsiclk(u8 n, bool enable)
1345{
1346 u32 val;
1347
1348 val = readl(PRCM_DSI_PLLOUT_SEL);
1349 val &= ~dsiclk[n].divsel_mask;
1350 val |= ((enable ? dsiclk[n].divsel : PRCM_DSI_PLLOUT_SEL_OFF) <<
1351 dsiclk[n].divsel_shift);
1352 writel(val, PRCM_DSI_PLLOUT_SEL);
1353 return 0;
1354}
1355
1356static int request_dsiescclk(u8 n, bool enable)
1357{
1358 u32 val;
1359
1360 val = readl(PRCM_DSITVCLK_DIV);
1361 enable ? (val |= dsiescclk[n].en) : (val &= ~dsiescclk[n].en);
1362 writel(val, PRCM_DSITVCLK_DIV);
1363 return 0;
1364}
1365
1366/**
1367 * db8500_prcmu_request_clock() - Request for a clock to be enabled or disabled.
1368 * @clock: The clock for which the request is made.
1369 * @enable: Whether the clock should be enabled (true) or disabled (false).
1370 *
1371 * This function should only be used by the clock implementation.
1372 * Do not use it from any other place!
1373 */
1374int db8500_prcmu_request_clock(u8 clock, bool enable)
1375{
1376 if (clock == PRCMU_SGACLK)
1377 return request_sga_clock(clock, enable);
1378 else if (clock < PRCMU_NUM_REG_CLOCKS)
1379 return request_clock(clock, enable);
1380 else if (clock == PRCMU_TIMCLK)
1381 return request_timclk(enable);
1382 else if ((clock == PRCMU_DSI0CLK) || (clock == PRCMU_DSI1CLK))
1383 return request_dsiclk((clock - PRCMU_DSI0CLK), enable);
1384 else if ((PRCMU_DSI0ESCCLK <= clock) && (clock <= PRCMU_DSI2ESCCLK))
1385 return request_dsiescclk((clock - PRCMU_DSI0ESCCLK), enable);
1386 else if (clock == PRCMU_PLLDSI)
1387 return request_plldsi(enable);
1388 else if (clock == PRCMU_SYSCLK)
1389 return request_sysclk(enable);
1390 else if ((clock == PRCMU_PLLSOC0) || (clock == PRCMU_PLLSOC1))
1391 return request_pll(clock, enable);
1392 else
1393 return -EINVAL;
1394}
1395
1396static unsigned long pll_rate(void __iomem *reg, unsigned long src_rate,
1397 int branch)
1398{
1399 u64 rate;
1400 u32 val;
1401 u32 d;
1402 u32 div = 1;
1403
1404 val = readl(reg);
1405
1406 rate = src_rate;
1407 rate *= ((val & PRCM_PLL_FREQ_D_MASK) >> PRCM_PLL_FREQ_D_SHIFT);
1408
1409 d = ((val & PRCM_PLL_FREQ_N_MASK) >> PRCM_PLL_FREQ_N_SHIFT);
1410 if (d > 1)
1411 div *= d;
1412
1413 d = ((val & PRCM_PLL_FREQ_R_MASK) >> PRCM_PLL_FREQ_R_SHIFT);
1414 if (d > 1)
1415 div *= d;
1416
1417 if (val & PRCM_PLL_FREQ_SELDIV2)
1418 div *= 2;
1419
1420 if ((branch == PLL_FIX) || ((branch == PLL_DIV) &&
1421 (val & PRCM_PLL_FREQ_DIV2EN) &&
1422 ((reg == PRCM_PLLSOC0_FREQ) ||
1423 (reg == PRCM_PLLARM_FREQ) ||
1424 (reg == PRCM_PLLDDR_FREQ))))
1425 div *= 2;
1426
1427 (void)do_div(rate, div);
1428
1429 return (unsigned long)rate;
1430}
1431
1432#define ROOT_CLOCK_RATE 38400000
1433
1434static unsigned long clock_rate(u8 clock)
1435{
1436 u32 val;
1437 u32 pllsw;
1438 unsigned long rate = ROOT_CLOCK_RATE;
1439
1440 val = readl(prcmu_base + clk_mgt[clock].offset);
1441
1442 if (val & PRCM_CLK_MGT_CLK38) {
1443 if (clk_mgt[clock].clk38div && (val & PRCM_CLK_MGT_CLK38DIV))
1444 rate /= 2;
1445 return rate;
1446 }
1447
1448 val |= clk_mgt[clock].pllsw;
1449 pllsw = (val & PRCM_CLK_MGT_CLKPLLSW_MASK);
1450
1451 if (pllsw == PRCM_CLK_MGT_CLKPLLSW_SOC0)
1452 rate = pll_rate(PRCM_PLLSOC0_FREQ, rate, clk_mgt[clock].branch);
1453 else if (pllsw == PRCM_CLK_MGT_CLKPLLSW_SOC1)
1454 rate = pll_rate(PRCM_PLLSOC1_FREQ, rate, clk_mgt[clock].branch);
1455 else if (pllsw == PRCM_CLK_MGT_CLKPLLSW_DDR)
1456 rate = pll_rate(PRCM_PLLDDR_FREQ, rate, clk_mgt[clock].branch);
1457 else
1458 return 0;
1459
1460 if ((clock == PRCMU_SGACLK) &&
1461 (val & PRCM_SGACLK_MGT_SGACLKDIV_BY_2_5_EN)) {
1462 u64 r = (rate * 10);
1463
1464 (void)do_div(r, 25);
1465 return (unsigned long)r;
1466 }
1467 val &= PRCM_CLK_MGT_CLKPLLDIV_MASK;
1468 if (val)
1469 return rate / val;
1470 else
1471 return 0;
1472}
1473
1474static unsigned long armss_rate(void)
1475{
1476 u32 r;
1477 unsigned long rate;
1478
1479 r = readl(PRCM_ARM_CHGCLKREQ);
1480
1481 if (r & PRCM_ARM_CHGCLKREQ_PRCM_ARM_CHGCLKREQ) {
1482 /* External ARMCLKFIX clock */
1483
1484 rate = pll_rate(PRCM_PLLDDR_FREQ, ROOT_CLOCK_RATE, PLL_FIX);
1485
1486 /* Check PRCM_ARM_CHGCLKREQ divider */
1487 if (!(r & PRCM_ARM_CHGCLKREQ_PRCM_ARM_DIVSEL))
1488 rate /= 2;
1489
1490 /* Check PRCM_ARMCLKFIX_MGT divider */
1491 r = readl(PRCM_ARMCLKFIX_MGT);
1492 r &= PRCM_CLK_MGT_CLKPLLDIV_MASK;
1493 rate /= r;
1494
1495 } else {/* ARM PLL */
1496 rate = pll_rate(PRCM_PLLARM_FREQ, ROOT_CLOCK_RATE, PLL_DIV);
1497 }
1498
1499 return rate;
1500}
1501
1502static unsigned long dsiclk_rate(u8 n)
1503{
1504 u32 divsel;
1505 u32 div = 1;
1506
1507 divsel = readl(PRCM_DSI_PLLOUT_SEL);
1508 divsel = ((divsel & dsiclk[n].divsel_mask) >> dsiclk[n].divsel_shift);
1509
1510 if (divsel == PRCM_DSI_PLLOUT_SEL_OFF)
1511 divsel = dsiclk[n].divsel;
1512 else
1513 dsiclk[n].divsel = divsel;
1514
1515 switch (divsel) {
1516 case PRCM_DSI_PLLOUT_SEL_PHI_4:
1517 div *= 2;
1518 fallthrough;
1519 case PRCM_DSI_PLLOUT_SEL_PHI_2:
1520 div *= 2;
1521 fallthrough;
1522 case PRCM_DSI_PLLOUT_SEL_PHI:
1523 return pll_rate(PRCM_PLLDSI_FREQ, clock_rate(PRCMU_HDMICLK),
1524 PLL_RAW) / div;
1525 default:
1526 return 0;
1527 }
1528}
1529
1530static unsigned long dsiescclk_rate(u8 n)
1531{
1532 u32 div;
1533
1534 div = readl(PRCM_DSITVCLK_DIV);
1535 div = ((div & dsiescclk[n].div_mask) >> (dsiescclk[n].div_shift));
1536 return clock_rate(PRCMU_TVCLK) / max((u32)1, div);
1537}
1538
1539unsigned long prcmu_clock_rate(u8 clock)
1540{
1541 if (clock < PRCMU_NUM_REG_CLOCKS)
1542 return clock_rate(clock);
1543 else if (clock == PRCMU_TIMCLK)
1544 return prcmu_is_ulppll_disabled() ?
1545 32768 : ROOT_CLOCK_RATE / 16;
1546 else if (clock == PRCMU_SYSCLK)
1547 return ROOT_CLOCK_RATE;
1548 else if (clock == PRCMU_PLLSOC0)
1549 return pll_rate(PRCM_PLLSOC0_FREQ, ROOT_CLOCK_RATE, PLL_RAW);
1550 else if (clock == PRCMU_PLLSOC1)
1551 return pll_rate(PRCM_PLLSOC1_FREQ, ROOT_CLOCK_RATE, PLL_RAW);
1552 else if (clock == PRCMU_ARMSS)
1553 return armss_rate();
1554 else if (clock == PRCMU_PLLDDR)
1555 return pll_rate(PRCM_PLLDDR_FREQ, ROOT_CLOCK_RATE, PLL_RAW);
1556 else if (clock == PRCMU_PLLDSI)
1557 return pll_rate(PRCM_PLLDSI_FREQ, clock_rate(PRCMU_HDMICLK),
1558 PLL_RAW);
1559 else if ((clock == PRCMU_DSI0CLK) || (clock == PRCMU_DSI1CLK))
1560 return dsiclk_rate(clock - PRCMU_DSI0CLK);
1561 else if ((PRCMU_DSI0ESCCLK <= clock) && (clock <= PRCMU_DSI2ESCCLK))
1562 return dsiescclk_rate(clock - PRCMU_DSI0ESCCLK);
1563 else
1564 return 0;
1565}
1566
1567static unsigned long clock_source_rate(u32 clk_mgt_val, int branch)
1568{
1569 if (clk_mgt_val & PRCM_CLK_MGT_CLK38)
1570 return ROOT_CLOCK_RATE;
1571 clk_mgt_val &= PRCM_CLK_MGT_CLKPLLSW_MASK;
1572 if (clk_mgt_val == PRCM_CLK_MGT_CLKPLLSW_SOC0)
1573 return pll_rate(PRCM_PLLSOC0_FREQ, ROOT_CLOCK_RATE, branch);
1574 else if (clk_mgt_val == PRCM_CLK_MGT_CLKPLLSW_SOC1)
1575 return pll_rate(PRCM_PLLSOC1_FREQ, ROOT_CLOCK_RATE, branch);
1576 else if (clk_mgt_val == PRCM_CLK_MGT_CLKPLLSW_DDR)
1577 return pll_rate(PRCM_PLLDDR_FREQ, ROOT_CLOCK_RATE, branch);
1578 else
1579 return 0;
1580}
1581
1582static u32 clock_divider(unsigned long src_rate, unsigned long rate)
1583{
1584 u32 div;
1585
1586 div = (src_rate / rate);
1587 if (div == 0)
1588 return 1;
1589 if (rate < (src_rate / div))
1590 div++;
1591 return div;
1592}
1593
1594static long round_clock_rate(u8 clock, unsigned long rate)
1595{
1596 u32 val;
1597 u32 div;
1598 unsigned long src_rate;
1599 long rounded_rate;
1600
1601 val = readl(prcmu_base + clk_mgt[clock].offset);
1602 src_rate = clock_source_rate((val | clk_mgt[clock].pllsw),
1603 clk_mgt[clock].branch);
1604 div = clock_divider(src_rate, rate);
1605 if (val & PRCM_CLK_MGT_CLK38) {
1606 if (clk_mgt[clock].clk38div) {
1607 if (div > 2)
1608 div = 2;
1609 } else {
1610 div = 1;
1611 }
1612 } else if ((clock == PRCMU_SGACLK) && (div == 3)) {
1613 u64 r = (src_rate * 10);
1614
1615 (void)do_div(r, 25);
1616 if (r <= rate)
1617 return (unsigned long)r;
1618 }
1619 rounded_rate = (src_rate / min(div, (u32)31));
1620
1621 return rounded_rate;
1622}
1623
1624static const unsigned long db8500_armss_freqs[] = {
1625 200000000,
1626 400000000,
1627 800000000,
1628 998400000
1629};
1630
1631/* The DB8520 has slightly higher ARMSS max frequency */
1632static const unsigned long db8520_armss_freqs[] = {
1633 200000000,
1634 400000000,
1635 800000000,
1636 1152000000
1637};
1638
1639
1640
1641static long round_armss_rate(unsigned long rate)
1642{
1643 unsigned long freq = 0;
1644 const unsigned long *freqs;
1645 int nfreqs;
1646 int i;
1647
1648 if (fw_info.version.project == PRCMU_FW_PROJECT_U8520) {
1649 freqs = db8520_armss_freqs;
1650 nfreqs = ARRAY_SIZE(db8520_armss_freqs);
1651 } else {
1652 freqs = db8500_armss_freqs;
1653 nfreqs = ARRAY_SIZE(db8500_armss_freqs);
1654 }
1655
1656 /* Find the corresponding arm opp from the cpufreq table. */
1657 for (i = 0; i < nfreqs; i++) {
1658 freq = freqs[i];
1659 if (rate <= freq)
1660 break;
1661 }
1662
1663 /* Return the last valid value, even if a match was not found. */
1664 return freq;
1665}
1666
1667#define MIN_PLL_VCO_RATE 600000000ULL
1668#define MAX_PLL_VCO_RATE 1680640000ULL
1669
1670static long round_plldsi_rate(unsigned long rate)
1671{
1672 long rounded_rate = 0;
1673 unsigned long src_rate;
1674 unsigned long rem;
1675 u32 r;
1676
1677 src_rate = clock_rate(PRCMU_HDMICLK);
1678 rem = rate;
1679
1680 for (r = 7; (rem > 0) && (r > 0); r--) {
1681 u64 d;
1682
1683 d = (r * rate);
1684 (void)do_div(d, src_rate);
1685 if (d < 6)
1686 d = 6;
1687 else if (d > 255)
1688 d = 255;
1689 d *= src_rate;
1690 if (((2 * d) < (r * MIN_PLL_VCO_RATE)) ||
1691 ((r * MAX_PLL_VCO_RATE) < (2 * d)))
1692 continue;
1693 (void)do_div(d, r);
1694 if (rate < d) {
1695 if (rounded_rate == 0)
1696 rounded_rate = (long)d;
1697 break;
1698 }
1699 if ((rate - d) < rem) {
1700 rem = (rate - d);
1701 rounded_rate = (long)d;
1702 }
1703 }
1704 return rounded_rate;
1705}
1706
1707static long round_dsiclk_rate(unsigned long rate)
1708{
1709 u32 div;
1710 unsigned long src_rate;
1711 long rounded_rate;
1712
1713 src_rate = pll_rate(PRCM_PLLDSI_FREQ, clock_rate(PRCMU_HDMICLK),
1714 PLL_RAW);
1715 div = clock_divider(src_rate, rate);
1716 rounded_rate = (src_rate / ((div > 2) ? 4 : div));
1717
1718 return rounded_rate;
1719}
1720
1721static long round_dsiescclk_rate(unsigned long rate)
1722{
1723 u32 div;
1724 unsigned long src_rate;
1725 long rounded_rate;
1726
1727 src_rate = clock_rate(PRCMU_TVCLK);
1728 div = clock_divider(src_rate, rate);
1729 rounded_rate = (src_rate / min(div, (u32)255));
1730
1731 return rounded_rate;
1732}
1733
1734long prcmu_round_clock_rate(u8 clock, unsigned long rate)
1735{
1736 if (clock < PRCMU_NUM_REG_CLOCKS)
1737 return round_clock_rate(clock, rate);
1738 else if (clock == PRCMU_ARMSS)
1739 return round_armss_rate(rate);
1740 else if (clock == PRCMU_PLLDSI)
1741 return round_plldsi_rate(rate);
1742 else if ((clock == PRCMU_DSI0CLK) || (clock == PRCMU_DSI1CLK))
1743 return round_dsiclk_rate(rate);
1744 else if ((PRCMU_DSI0ESCCLK <= clock) && (clock <= PRCMU_DSI2ESCCLK))
1745 return round_dsiescclk_rate(rate);
1746 else
1747 return (long)prcmu_clock_rate(clock);
1748}
1749
1750static void set_clock_rate(u8 clock, unsigned long rate)
1751{
1752 u32 val;
1753 u32 div;
1754 unsigned long src_rate;
1755 unsigned long flags;
1756
1757 spin_lock_irqsave(&clk_mgt_lock, flags);
1758
1759 /* Grab the HW semaphore. */
1760 while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
1761 cpu_relax();
1762
1763 val = readl(prcmu_base + clk_mgt[clock].offset);
1764 src_rate = clock_source_rate((val | clk_mgt[clock].pllsw),
1765 clk_mgt[clock].branch);
1766 div = clock_divider(src_rate, rate);
1767 if (val & PRCM_CLK_MGT_CLK38) {
1768 if (clk_mgt[clock].clk38div) {
1769 if (div > 1)
1770 val |= PRCM_CLK_MGT_CLK38DIV;
1771 else
1772 val &= ~PRCM_CLK_MGT_CLK38DIV;
1773 }
1774 } else if (clock == PRCMU_SGACLK) {
1775 val &= ~(PRCM_CLK_MGT_CLKPLLDIV_MASK |
1776 PRCM_SGACLK_MGT_SGACLKDIV_BY_2_5_EN);
1777 if (div == 3) {
1778 u64 r = (src_rate * 10);
1779
1780 (void)do_div(r, 25);
1781 if (r <= rate) {
1782 val |= PRCM_SGACLK_MGT_SGACLKDIV_BY_2_5_EN;
1783 div = 0;
1784 }
1785 }
1786 val |= min(div, (u32)31);
1787 } else {
1788 val &= ~PRCM_CLK_MGT_CLKPLLDIV_MASK;
1789 val |= min(div, (u32)31);
1790 }
1791 writel(val, prcmu_base + clk_mgt[clock].offset);
1792
1793 /* Release the HW semaphore. */
1794 writel(0, PRCM_SEM);
1795
1796 spin_unlock_irqrestore(&clk_mgt_lock, flags);
1797}
1798
1799static int set_armss_rate(unsigned long rate)
1800{
1801 unsigned long freq;
1802 u8 opps[] = { ARM_EXTCLK, ARM_50_OPP, ARM_100_OPP, ARM_MAX_OPP };
1803 const unsigned long *freqs;
1804 int nfreqs;
1805 int i;
1806
1807 if (fw_info.version.project == PRCMU_FW_PROJECT_U8520) {
1808 freqs = db8520_armss_freqs;
1809 nfreqs = ARRAY_SIZE(db8520_armss_freqs);
1810 } else {
1811 freqs = db8500_armss_freqs;
1812 nfreqs = ARRAY_SIZE(db8500_armss_freqs);
1813 }
1814
1815 /* Find the corresponding arm opp from the cpufreq table. */
1816 for (i = 0; i < nfreqs; i++) {
1817 freq = freqs[i];
1818 if (rate == freq)
1819 break;
1820 }
1821
1822 if (rate != freq)
1823 return -EINVAL;
1824
1825 /* Set the new arm opp. */
1826 pr_debug("SET ARM OPP 0x%02x\n", opps[i]);
1827 return db8500_prcmu_set_arm_opp(opps[i]);
1828}
1829
1830static int set_plldsi_rate(unsigned long rate)
1831{
1832 unsigned long src_rate;
1833 unsigned long rem;
1834 u32 pll_freq = 0;
1835 u32 r;
1836
1837 src_rate = clock_rate(PRCMU_HDMICLK);
1838 rem = rate;
1839
1840 for (r = 7; (rem > 0) && (r > 0); r--) {
1841 u64 d;
1842 u64 hwrate;
1843
1844 d = (r * rate);
1845 (void)do_div(d, src_rate);
1846 if (d < 6)
1847 d = 6;
1848 else if (d > 255)
1849 d = 255;
1850 hwrate = (d * src_rate);
1851 if (((2 * hwrate) < (r * MIN_PLL_VCO_RATE)) ||
1852 ((r * MAX_PLL_VCO_RATE) < (2 * hwrate)))
1853 continue;
1854 (void)do_div(hwrate, r);
1855 if (rate < hwrate) {
1856 if (pll_freq == 0)
1857 pll_freq = (((u32)d << PRCM_PLL_FREQ_D_SHIFT) |
1858 (r << PRCM_PLL_FREQ_R_SHIFT));
1859 break;
1860 }
1861 if ((rate - hwrate) < rem) {
1862 rem = (rate - hwrate);
1863 pll_freq = (((u32)d << PRCM_PLL_FREQ_D_SHIFT) |
1864 (r << PRCM_PLL_FREQ_R_SHIFT));
1865 }
1866 }
1867 if (pll_freq == 0)
1868 return -EINVAL;
1869
1870 pll_freq |= (1 << PRCM_PLL_FREQ_N_SHIFT);
1871 writel(pll_freq, PRCM_PLLDSI_FREQ);
1872
1873 return 0;
1874}
1875
1876static void set_dsiclk_rate(u8 n, unsigned long rate)
1877{
1878 u32 val;
1879 u32 div;
1880
1881 div = clock_divider(pll_rate(PRCM_PLLDSI_FREQ,
1882 clock_rate(PRCMU_HDMICLK), PLL_RAW), rate);
1883
1884 dsiclk[n].divsel = (div == 1) ? PRCM_DSI_PLLOUT_SEL_PHI :
1885 (div == 2) ? PRCM_DSI_PLLOUT_SEL_PHI_2 :
1886 /* else */ PRCM_DSI_PLLOUT_SEL_PHI_4;
1887
1888 val = readl(PRCM_DSI_PLLOUT_SEL);
1889 val &= ~dsiclk[n].divsel_mask;
1890 val |= (dsiclk[n].divsel << dsiclk[n].divsel_shift);
1891 writel(val, PRCM_DSI_PLLOUT_SEL);
1892}
1893
1894static void set_dsiescclk_rate(u8 n, unsigned long rate)
1895{
1896 u32 val;
1897 u32 div;
1898
1899 div = clock_divider(clock_rate(PRCMU_TVCLK), rate);
1900 val = readl(PRCM_DSITVCLK_DIV);
1901 val &= ~dsiescclk[n].div_mask;
1902 val |= (min(div, (u32)255) << dsiescclk[n].div_shift);
1903 writel(val, PRCM_DSITVCLK_DIV);
1904}
1905
1906int prcmu_set_clock_rate(u8 clock, unsigned long rate)
1907{
1908 if (clock < PRCMU_NUM_REG_CLOCKS)
1909 set_clock_rate(clock, rate);
1910 else if (clock == PRCMU_ARMSS)
1911 return set_armss_rate(rate);
1912 else if (clock == PRCMU_PLLDSI)
1913 return set_plldsi_rate(rate);
1914 else if ((clock == PRCMU_DSI0CLK) || (clock == PRCMU_DSI1CLK))
1915 set_dsiclk_rate((clock - PRCMU_DSI0CLK), rate);
1916 else if ((PRCMU_DSI0ESCCLK <= clock) && (clock <= PRCMU_DSI2ESCCLK))
1917 set_dsiescclk_rate((clock - PRCMU_DSI0ESCCLK), rate);
1918 return 0;
1919}
1920
1921int db8500_prcmu_config_esram0_deep_sleep(u8 state)
1922{
1923 if ((state > ESRAM0_DEEP_SLEEP_STATE_RET) ||
1924 (state < ESRAM0_DEEP_SLEEP_STATE_OFF))
1925 return -EINVAL;
1926
1927 mutex_lock(&mb4_transfer.lock);
1928
1929 while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
1930 cpu_relax();
1931
1932 writeb(MB4H_MEM_ST, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
1933 writeb(((DDR_PWR_STATE_OFFHIGHLAT << 4) | DDR_PWR_STATE_ON),
1934 (tcdm_base + PRCM_REQ_MB4_DDR_ST_AP_SLEEP_IDLE));
1935 writeb(DDR_PWR_STATE_ON,
1936 (tcdm_base + PRCM_REQ_MB4_DDR_ST_AP_DEEP_IDLE));
1937 writeb(state, (tcdm_base + PRCM_REQ_MB4_ESRAM0_ST));
1938
1939 writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET);
1940 wait_for_completion(&mb4_transfer.work);
1941
1942 mutex_unlock(&mb4_transfer.lock);
1943
1944 return 0;
1945}
1946
1947int db8500_prcmu_config_hotdog(u8 threshold)
1948{
1949 mutex_lock(&mb4_transfer.lock);
1950
1951 while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
1952 cpu_relax();
1953
1954 writeb(threshold, (tcdm_base + PRCM_REQ_MB4_HOTDOG_THRESHOLD));
1955 writeb(MB4H_HOTDOG, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
1956
1957 writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET);
1958 wait_for_completion(&mb4_transfer.work);
1959
1960 mutex_unlock(&mb4_transfer.lock);
1961
1962 return 0;
1963}
1964
1965int db8500_prcmu_config_hotmon(u8 low, u8 high)
1966{
1967 mutex_lock(&mb4_transfer.lock);
1968
1969 while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
1970 cpu_relax();
1971
1972 writeb(low, (tcdm_base + PRCM_REQ_MB4_HOTMON_LOW));
1973 writeb(high, (tcdm_base + PRCM_REQ_MB4_HOTMON_HIGH));
1974 writeb((HOTMON_CONFIG_LOW | HOTMON_CONFIG_HIGH),
1975 (tcdm_base + PRCM_REQ_MB4_HOTMON_CONFIG));
1976 writeb(MB4H_HOTMON, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
1977
1978 writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET);
1979 wait_for_completion(&mb4_transfer.work);
1980
1981 mutex_unlock(&mb4_transfer.lock);
1982
1983 return 0;
1984}
1985EXPORT_SYMBOL_GPL(db8500_prcmu_config_hotmon);
1986
1987static int config_hot_period(u16 val)
1988{
1989 mutex_lock(&mb4_transfer.lock);
1990
1991 while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
1992 cpu_relax();
1993
1994 writew(val, (tcdm_base + PRCM_REQ_MB4_HOT_PERIOD));
1995 writeb(MB4H_HOT_PERIOD, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
1996
1997 writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET);
1998 wait_for_completion(&mb4_transfer.work);
1999
2000 mutex_unlock(&mb4_transfer.lock);
2001
2002 return 0;
2003}
2004
2005int db8500_prcmu_start_temp_sense(u16 cycles32k)
2006{
2007 if (cycles32k == 0xFFFF)
2008 return -EINVAL;
2009
2010 return config_hot_period(cycles32k);
2011}
2012EXPORT_SYMBOL_GPL(db8500_prcmu_start_temp_sense);
2013
2014int db8500_prcmu_stop_temp_sense(void)
2015{
2016 return config_hot_period(0xFFFF);
2017}
2018EXPORT_SYMBOL_GPL(db8500_prcmu_stop_temp_sense);
2019
2020static int prcmu_a9wdog(u8 cmd, u8 d0, u8 d1, u8 d2, u8 d3)
2021{
2022
2023 mutex_lock(&mb4_transfer.lock);
2024
2025 while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
2026 cpu_relax();
2027
2028 writeb(d0, (tcdm_base + PRCM_REQ_MB4_A9WDOG_0));
2029 writeb(d1, (tcdm_base + PRCM_REQ_MB4_A9WDOG_1));
2030 writeb(d2, (tcdm_base + PRCM_REQ_MB4_A9WDOG_2));
2031 writeb(d3, (tcdm_base + PRCM_REQ_MB4_A9WDOG_3));
2032
2033 writeb(cmd, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
2034
2035 writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET);
2036 wait_for_completion(&mb4_transfer.work);
2037
2038 mutex_unlock(&mb4_transfer.lock);
2039
2040 return 0;
2041
2042}
2043
2044int db8500_prcmu_config_a9wdog(u8 num, bool sleep_auto_off)
2045{
2046 BUG_ON(num == 0 || num > 0xf);
2047 return prcmu_a9wdog(MB4H_A9WDOG_CONF, num, 0, 0,
2048 sleep_auto_off ? A9WDOG_AUTO_OFF_EN :
2049 A9WDOG_AUTO_OFF_DIS);
2050}
2051EXPORT_SYMBOL(db8500_prcmu_config_a9wdog);
2052
2053int db8500_prcmu_enable_a9wdog(u8 id)
2054{
2055 return prcmu_a9wdog(MB4H_A9WDOG_EN, id, 0, 0, 0);
2056}
2057EXPORT_SYMBOL(db8500_prcmu_enable_a9wdog);
2058
2059int db8500_prcmu_disable_a9wdog(u8 id)
2060{
2061 return prcmu_a9wdog(MB4H_A9WDOG_DIS, id, 0, 0, 0);
2062}
2063EXPORT_SYMBOL(db8500_prcmu_disable_a9wdog);
2064
2065int db8500_prcmu_kick_a9wdog(u8 id)
2066{
2067 return prcmu_a9wdog(MB4H_A9WDOG_KICK, id, 0, 0, 0);
2068}
2069EXPORT_SYMBOL(db8500_prcmu_kick_a9wdog);
2070
2071/*
2072 * timeout is 28 bit, in ms.
2073 */
2074int db8500_prcmu_load_a9wdog(u8 id, u32 timeout)
2075{
2076 return prcmu_a9wdog(MB4H_A9WDOG_LOAD,
2077 (id & A9WDOG_ID_MASK) |
2078 /*
2079 * Put the lowest 28 bits of timeout at
2080 * offset 4. Four first bits are used for id.
2081 */
2082 (u8)((timeout << 4) & 0xf0),
2083 (u8)((timeout >> 4) & 0xff),
2084 (u8)((timeout >> 12) & 0xff),
2085 (u8)((timeout >> 20) & 0xff));
2086}
2087EXPORT_SYMBOL(db8500_prcmu_load_a9wdog);
2088
2089/**
2090 * prcmu_abb_read() - Read register value(s) from the ABB.
2091 * @slave: The I2C slave address.
2092 * @reg: The (start) register address.
2093 * @value: The read out value(s).
2094 * @size: The number of registers to read.
2095 *
2096 * Reads register value(s) from the ABB.
2097 * @size has to be 1 for the current firmware version.
2098 */
2099int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
2100{
2101 int r;
2102
2103 if (size != 1)
2104 return -EINVAL;
2105
2106 mutex_lock(&mb5_transfer.lock);
2107
2108 while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
2109 cpu_relax();
2110
2111 writeb(0, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB5));
2112 writeb(PRCMU_I2C_READ(slave), (tcdm_base + PRCM_REQ_MB5_I2C_SLAVE_OP));
2113 writeb(PRCMU_I2C_STOP_EN, (tcdm_base + PRCM_REQ_MB5_I2C_HW_BITS));
2114 writeb(reg, (tcdm_base + PRCM_REQ_MB5_I2C_REG));
2115 writeb(0, (tcdm_base + PRCM_REQ_MB5_I2C_VAL));
2116
2117 writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET);
2118
2119 if (!wait_for_completion_timeout(&mb5_transfer.work,
2120 msecs_to_jiffies(20000))) {
2121 pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",
2122 __func__);
2123 r = -EIO;
2124 } else {
2125 r = ((mb5_transfer.ack.status == I2C_RD_OK) ? 0 : -EIO);
2126 }
2127
2128 if (!r)
2129 *value = mb5_transfer.ack.value;
2130
2131 mutex_unlock(&mb5_transfer.lock);
2132
2133 return r;
2134}
2135
2136/**
2137 * prcmu_abb_write_masked() - Write masked register value(s) to the ABB.
2138 * @slave: The I2C slave address.
2139 * @reg: The (start) register address.
2140 * @value: The value(s) to write.
2141 * @mask: The mask(s) to use.
2142 * @size: The number of registers to write.
2143 *
2144 * Writes masked register value(s) to the ABB.
2145 * For each @value, only the bits set to 1 in the corresponding @mask
2146 * will be written. The other bits are not changed.
2147 * @size has to be 1 for the current firmware version.
2148 */
2149int prcmu_abb_write_masked(u8 slave, u8 reg, u8 *value, u8 *mask, u8 size)
2150{
2151 int r;
2152
2153 if (size != 1)
2154 return -EINVAL;
2155
2156 mutex_lock(&mb5_transfer.lock);
2157
2158 while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
2159 cpu_relax();
2160
2161 writeb(~*mask, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB5));
2162 writeb(PRCMU_I2C_WRITE(slave), (tcdm_base + PRCM_REQ_MB5_I2C_SLAVE_OP));
2163 writeb(PRCMU_I2C_STOP_EN, (tcdm_base + PRCM_REQ_MB5_I2C_HW_BITS));
2164 writeb(reg, (tcdm_base + PRCM_REQ_MB5_I2C_REG));
2165 writeb(*value, (tcdm_base + PRCM_REQ_MB5_I2C_VAL));
2166
2167 writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET);
2168
2169 if (!wait_for_completion_timeout(&mb5_transfer.work,
2170 msecs_to_jiffies(20000))) {
2171 pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",
2172 __func__);
2173 r = -EIO;
2174 } else {
2175 r = ((mb5_transfer.ack.status == I2C_WR_OK) ? 0 : -EIO);
2176 }
2177
2178 mutex_unlock(&mb5_transfer.lock);
2179
2180 return r;
2181}
2182
2183/**
2184 * prcmu_abb_write() - Write register value(s) to the ABB.
2185 * @slave: The I2C slave address.
2186 * @reg: The (start) register address.
2187 * @value: The value(s) to write.
2188 * @size: The number of registers to write.
2189 *
2190 * Writes register value(s) to the ABB.
2191 * @size has to be 1 for the current firmware version.
2192 */
2193int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
2194{
2195 u8 mask = ~0;
2196
2197 return prcmu_abb_write_masked(slave, reg, value, &mask, size);
2198}
2199
2200/**
2201 * prcmu_ac_wake_req - should be called whenever ARM wants to wakeup Modem
2202 */
2203int prcmu_ac_wake_req(void)
2204{
2205 u32 val;
2206 int ret = 0;
2207
2208 mutex_lock(&mb0_transfer.ac_wake_lock);
2209
2210 val = readl(PRCM_HOSTACCESS_REQ);
2211 if (val & PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ)
2212 goto unlock_and_return;
2213
2214 atomic_set(&ac_wake_req_state, 1);
2215
2216 /*
2217 * Force Modem Wake-up before hostaccess_req ping-pong.
2218 * It prevents Modem to enter in Sleep while acking the hostaccess
2219 * request. The 31us delay has been calculated by HWI.
2220 */
2221 val |= PRCM_HOSTACCESS_REQ_WAKE_REQ;
2222 writel(val, PRCM_HOSTACCESS_REQ);
2223
2224 udelay(31);
2225
2226 val |= PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ;
2227 writel(val, PRCM_HOSTACCESS_REQ);
2228
2229 if (!wait_for_completion_timeout(&mb0_transfer.ac_wake_work,
2230 msecs_to_jiffies(5000))) {
2231 pr_crit("prcmu: %s timed out (5 s) waiting for a reply.\n",
2232 __func__);
2233 ret = -EFAULT;
2234 }
2235
2236unlock_and_return:
2237 mutex_unlock(&mb0_transfer.ac_wake_lock);
2238 return ret;
2239}
2240
2241/**
2242 * prcmu_ac_sleep_req - called when ARM no longer needs to talk to modem
2243 */
2244void prcmu_ac_sleep_req(void)
2245{
2246 u32 val;
2247
2248 mutex_lock(&mb0_transfer.ac_wake_lock);
2249
2250 val = readl(PRCM_HOSTACCESS_REQ);
2251 if (!(val & PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ))
2252 goto unlock_and_return;
2253
2254 writel((val & ~PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ),
2255 PRCM_HOSTACCESS_REQ);
2256
2257 if (!wait_for_completion_timeout(&mb0_transfer.ac_wake_work,
2258 msecs_to_jiffies(5000))) {
2259 pr_crit("prcmu: %s timed out (5 s) waiting for a reply.\n",
2260 __func__);
2261 }
2262
2263 atomic_set(&ac_wake_req_state, 0);
2264
2265unlock_and_return:
2266 mutex_unlock(&mb0_transfer.ac_wake_lock);
2267}
2268
2269bool db8500_prcmu_is_ac_wake_requested(void)
2270{
2271 return (atomic_read(&ac_wake_req_state) != 0);
2272}
2273
2274/**
2275 * db8500_prcmu_system_reset - System reset
2276 *
2277 * Saves the reset reason code and then sets the APE_SOFTRST register which
2278 * fires interrupt to fw
2279 *
2280 * @reset_code: The reason for system reset
2281 */
2282void db8500_prcmu_system_reset(u16 reset_code)
2283{
2284 writew(reset_code, (tcdm_base + PRCM_SW_RST_REASON));
2285 writel(1, PRCM_APE_SOFTRST);
2286}
2287
2288/**
2289 * db8500_prcmu_get_reset_code - Retrieve SW reset reason code
2290 *
2291 * Retrieves the reset reason code stored by prcmu_system_reset() before
2292 * last restart.
2293 */
2294u16 db8500_prcmu_get_reset_code(void)
2295{
2296 return readw(tcdm_base + PRCM_SW_RST_REASON);
2297}
2298
2299/**
2300 * db8500_prcmu_reset_modem - ask the PRCMU to reset modem
2301 */
2302void db8500_prcmu_modem_reset(void)
2303{
2304 mutex_lock(&mb1_transfer.lock);
2305
2306 while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
2307 cpu_relax();
2308
2309 writeb(MB1H_RESET_MODEM, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
2310 writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
2311 wait_for_completion(&mb1_transfer.work);
2312
2313 /*
2314 * No need to check return from PRCMU as modem should go in reset state
2315 * This state is already managed by upper layer
2316 */
2317
2318 mutex_unlock(&mb1_transfer.lock);
2319}
2320
2321static void ack_dbb_wakeup(void)
2322{
2323 unsigned long flags;
2324
2325 spin_lock_irqsave(&mb0_transfer.lock, flags);
2326
2327 while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
2328 cpu_relax();
2329
2330 writeb(MB0H_READ_WAKEUP_ACK, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0));
2331 writel(MBOX_BIT(0), PRCM_MBOX_CPU_SET);
2332
2333 spin_unlock_irqrestore(&mb0_transfer.lock, flags);
2334}
2335
2336static inline void print_unknown_header_warning(u8 n, u8 header)
2337{
2338 pr_warn("prcmu: Unknown message header (%d) in mailbox %d\n",
2339 header, n);
2340}
2341
2342static bool read_mailbox_0(void)
2343{
2344 bool r;
2345 u32 ev;
2346 unsigned int n;
2347 u8 header;
2348
2349 header = readb(tcdm_base + PRCM_MBOX_HEADER_ACK_MB0);
2350 switch (header) {
2351 case MB0H_WAKEUP_EXE:
2352 case MB0H_WAKEUP_SLEEP:
2353 if (readb(tcdm_base + PRCM_ACK_MB0_READ_POINTER) & 1)
2354 ev = readl(tcdm_base + PRCM_ACK_MB0_WAKEUP_1_8500);
2355 else
2356 ev = readl(tcdm_base + PRCM_ACK_MB0_WAKEUP_0_8500);
2357
2358 if (ev & (WAKEUP_BIT_AC_WAKE_ACK | WAKEUP_BIT_AC_SLEEP_ACK))
2359 complete(&mb0_transfer.ac_wake_work);
2360 if (ev & WAKEUP_BIT_SYSCLK_OK)
2361 complete(&mb3_transfer.sysclk_work);
2362
2363 ev &= mb0_transfer.req.dbb_irqs;
2364
2365 for (n = 0; n < NUM_PRCMU_WAKEUPS; n++) {
2366 if (ev & prcmu_irq_bit[n])
2367 generic_handle_irq(irq_find_mapping(db8500_irq_domain, n));
2368 }
2369 r = true;
2370 break;
2371 default:
2372 print_unknown_header_warning(0, header);
2373 r = false;
2374 break;
2375 }
2376 writel(MBOX_BIT(0), PRCM_ARM_IT1_CLR);
2377 return r;
2378}
2379
2380static bool read_mailbox_1(void)
2381{
2382 mb1_transfer.ack.header = readb(tcdm_base + PRCM_MBOX_HEADER_REQ_MB1);
2383 mb1_transfer.ack.arm_opp = readb(tcdm_base +
2384 PRCM_ACK_MB1_CURRENT_ARM_OPP);
2385 mb1_transfer.ack.ape_opp = readb(tcdm_base +
2386 PRCM_ACK_MB1_CURRENT_APE_OPP);
2387 mb1_transfer.ack.ape_voltage_status = readb(tcdm_base +
2388 PRCM_ACK_MB1_APE_VOLTAGE_STATUS);
2389 writel(MBOX_BIT(1), PRCM_ARM_IT1_CLR);
2390 complete(&mb1_transfer.work);
2391 return false;
2392}
2393
2394static bool read_mailbox_2(void)
2395{
2396 mb2_transfer.ack.status = readb(tcdm_base + PRCM_ACK_MB2_DPS_STATUS);
2397 writel(MBOX_BIT(2), PRCM_ARM_IT1_CLR);
2398 complete(&mb2_transfer.work);
2399 return false;
2400}
2401
2402static bool read_mailbox_3(void)
2403{
2404 writel(MBOX_BIT(3), PRCM_ARM_IT1_CLR);
2405 return false;
2406}
2407
2408static bool read_mailbox_4(void)
2409{
2410 u8 header;
2411 bool do_complete = true;
2412
2413 header = readb(tcdm_base + PRCM_MBOX_HEADER_REQ_MB4);
2414 switch (header) {
2415 case MB4H_MEM_ST:
2416 case MB4H_HOTDOG:
2417 case MB4H_HOTMON:
2418 case MB4H_HOT_PERIOD:
2419 case MB4H_A9WDOG_CONF:
2420 case MB4H_A9WDOG_EN:
2421 case MB4H_A9WDOG_DIS:
2422 case MB4H_A9WDOG_LOAD:
2423 case MB4H_A9WDOG_KICK:
2424 break;
2425 default:
2426 print_unknown_header_warning(4, header);
2427 do_complete = false;
2428 break;
2429 }
2430
2431 writel(MBOX_BIT(4), PRCM_ARM_IT1_CLR);
2432
2433 if (do_complete)
2434 complete(&mb4_transfer.work);
2435
2436 return false;
2437}
2438
2439static bool read_mailbox_5(void)
2440{
2441 mb5_transfer.ack.status = readb(tcdm_base + PRCM_ACK_MB5_I2C_STATUS);
2442 mb5_transfer.ack.value = readb(tcdm_base + PRCM_ACK_MB5_I2C_VAL);
2443 writel(MBOX_BIT(5), PRCM_ARM_IT1_CLR);
2444 complete(&mb5_transfer.work);
2445 return false;
2446}
2447
2448static bool read_mailbox_6(void)
2449{
2450 writel(MBOX_BIT(6), PRCM_ARM_IT1_CLR);
2451 return false;
2452}
2453
2454static bool read_mailbox_7(void)
2455{
2456 writel(MBOX_BIT(7), PRCM_ARM_IT1_CLR);
2457 return false;
2458}
2459
2460static bool (* const read_mailbox[NUM_MB])(void) = {
2461 read_mailbox_0,
2462 read_mailbox_1,
2463 read_mailbox_2,
2464 read_mailbox_3,
2465 read_mailbox_4,
2466 read_mailbox_5,
2467 read_mailbox_6,
2468 read_mailbox_7
2469};
2470
2471static irqreturn_t prcmu_irq_handler(int irq, void *data)
2472{
2473 u32 bits;
2474 u8 n;
2475 irqreturn_t r;
2476
2477 bits = (readl(PRCM_ARM_IT1_VAL) & ALL_MBOX_BITS);
2478 if (unlikely(!bits))
2479 return IRQ_NONE;
2480
2481 r = IRQ_HANDLED;
2482 for (n = 0; bits; n++) {
2483 if (bits & MBOX_BIT(n)) {
2484 bits -= MBOX_BIT(n);
2485 if (read_mailbox[n]())
2486 r = IRQ_WAKE_THREAD;
2487 }
2488 }
2489 return r;
2490}
2491
2492static irqreturn_t prcmu_irq_thread_fn(int irq, void *data)
2493{
2494 ack_dbb_wakeup();
2495 return IRQ_HANDLED;
2496}
2497
2498static void prcmu_mask_work(struct work_struct *work)
2499{
2500 unsigned long flags;
2501
2502 spin_lock_irqsave(&mb0_transfer.lock, flags);
2503
2504 config_wakeups();
2505
2506 spin_unlock_irqrestore(&mb0_transfer.lock, flags);
2507}
2508
2509static void prcmu_irq_mask(struct irq_data *d)
2510{
2511 unsigned long flags;
2512
2513 spin_lock_irqsave(&mb0_transfer.dbb_irqs_lock, flags);
2514
2515 mb0_transfer.req.dbb_irqs &= ~prcmu_irq_bit[d->hwirq];
2516
2517 spin_unlock_irqrestore(&mb0_transfer.dbb_irqs_lock, flags);
2518
2519 if (d->irq != IRQ_PRCMU_CA_SLEEP)
2520 schedule_work(&mb0_transfer.mask_work);
2521}
2522
2523static void prcmu_irq_unmask(struct irq_data *d)
2524{
2525 unsigned long flags;
2526
2527 spin_lock_irqsave(&mb0_transfer.dbb_irqs_lock, flags);
2528
2529 mb0_transfer.req.dbb_irqs |= prcmu_irq_bit[d->hwirq];
2530
2531 spin_unlock_irqrestore(&mb0_transfer.dbb_irqs_lock, flags);
2532
2533 if (d->irq != IRQ_PRCMU_CA_SLEEP)
2534 schedule_work(&mb0_transfer.mask_work);
2535}
2536
2537static void noop(struct irq_data *d)
2538{
2539}
2540
2541static struct irq_chip prcmu_irq_chip = {
2542 .name = "prcmu",
2543 .irq_disable = prcmu_irq_mask,
2544 .irq_ack = noop,
2545 .irq_mask = prcmu_irq_mask,
2546 .irq_unmask = prcmu_irq_unmask,
2547};
2548
2549static char *fw_project_name(u32 project)
2550{
2551 switch (project) {
2552 case PRCMU_FW_PROJECT_U8500:
2553 return "U8500";
2554 case PRCMU_FW_PROJECT_U8400:
2555 return "U8400";
2556 case PRCMU_FW_PROJECT_U9500:
2557 return "U9500";
2558 case PRCMU_FW_PROJECT_U8500_MBB:
2559 return "U8500 MBB";
2560 case PRCMU_FW_PROJECT_U8500_C1:
2561 return "U8500 C1";
2562 case PRCMU_FW_PROJECT_U8500_C2:
2563 return "U8500 C2";
2564 case PRCMU_FW_PROJECT_U8500_C3:
2565 return "U8500 C3";
2566 case PRCMU_FW_PROJECT_U8500_C4:
2567 return "U8500 C4";
2568 case PRCMU_FW_PROJECT_U9500_MBL:
2569 return "U9500 MBL";
2570 case PRCMU_FW_PROJECT_U8500_MBL:
2571 return "U8500 MBL";
2572 case PRCMU_FW_PROJECT_U8500_MBL2:
2573 return "U8500 MBL2";
2574 case PRCMU_FW_PROJECT_U8520:
2575 return "U8520 MBL";
2576 case PRCMU_FW_PROJECT_U8420:
2577 return "U8420";
2578 case PRCMU_FW_PROJECT_U8420_SYSCLK:
2579 return "U8420-sysclk";
2580 case PRCMU_FW_PROJECT_U9540:
2581 return "U9540";
2582 case PRCMU_FW_PROJECT_A9420:
2583 return "A9420";
2584 case PRCMU_FW_PROJECT_L8540:
2585 return "L8540";
2586 case PRCMU_FW_PROJECT_L8580:
2587 return "L8580";
2588 default:
2589 return "Unknown";
2590 }
2591}
2592
2593static int db8500_irq_map(struct irq_domain *d, unsigned int virq,
2594 irq_hw_number_t hwirq)
2595{
2596 irq_set_chip_and_handler(virq, &prcmu_irq_chip,
2597 handle_simple_irq);
2598
2599 return 0;
2600}
2601
2602static const struct irq_domain_ops db8500_irq_ops = {
2603 .map = db8500_irq_map,
2604 .xlate = irq_domain_xlate_twocell,
2605};
2606
2607static int db8500_irq_init(struct device_node *np)
2608{
2609 int i;
2610
2611 db8500_irq_domain = irq_domain_add_simple(
2612 np, NUM_PRCMU_WAKEUPS, 0,
2613 &db8500_irq_ops, NULL);
2614
2615 if (!db8500_irq_domain) {
2616 pr_err("Failed to create irqdomain\n");
2617 return -ENOSYS;
2618 }
2619
2620 /* All wakeups will be used, so create mappings for all */
2621 for (i = 0; i < NUM_PRCMU_WAKEUPS; i++)
2622 irq_create_mapping(db8500_irq_domain, i);
2623
2624 return 0;
2625}
2626
2627static void dbx500_fw_version_init(struct device_node *np)
2628{
2629 void __iomem *tcpm_base;
2630 u32 version;
2631
2632 tcpm_base = of_iomap(np, 1);
2633 if (!tcpm_base) {
2634 pr_err("no prcmu tcpm mem region provided\n");
2635 return;
2636 }
2637
2638 version = readl(tcpm_base + DB8500_PRCMU_FW_VERSION_OFFSET);
2639 fw_info.version.project = (version & 0xFF);
2640 fw_info.version.api_version = (version >> 8) & 0xFF;
2641 fw_info.version.func_version = (version >> 16) & 0xFF;
2642 fw_info.version.errata = (version >> 24) & 0xFF;
2643 strncpy(fw_info.version.project_name,
2644 fw_project_name(fw_info.version.project),
2645 PRCMU_FW_PROJECT_NAME_LEN);
2646 fw_info.valid = true;
2647 pr_info("PRCMU firmware: %s(%d), version %d.%d.%d\n",
2648 fw_info.version.project_name,
2649 fw_info.version.project,
2650 fw_info.version.api_version,
2651 fw_info.version.func_version,
2652 fw_info.version.errata);
2653 iounmap(tcpm_base);
2654}
2655
2656void __init db8500_prcmu_early_init(void)
2657{
2658 /*
2659 * This is a temporary remap to bring up the clocks. It is
2660 * subsequently replaces with a real remap. After the merge of
2661 * the mailbox subsystem all of this early code goes away, and the
2662 * clock driver can probe independently. An early initcall will
2663 * still be needed, but it can be diverted into drivers/clk/ux500.
2664 */
2665 struct device_node *np;
2666
2667 np = of_find_compatible_node(NULL, NULL, "stericsson,db8500-prcmu");
2668 prcmu_base = of_iomap(np, 0);
2669 if (!prcmu_base) {
2670 of_node_put(np);
2671 pr_err("%s: ioremap() of prcmu registers failed!\n", __func__);
2672 return;
2673 }
2674 dbx500_fw_version_init(np);
2675 of_node_put(np);
2676
2677 spin_lock_init(&mb0_transfer.lock);
2678 spin_lock_init(&mb0_transfer.dbb_irqs_lock);
2679 mutex_init(&mb0_transfer.ac_wake_lock);
2680 init_completion(&mb0_transfer.ac_wake_work);
2681 mutex_init(&mb1_transfer.lock);
2682 init_completion(&mb1_transfer.work);
2683 mb1_transfer.ape_opp = APE_NO_CHANGE;
2684 mutex_init(&mb2_transfer.lock);
2685 init_completion(&mb2_transfer.work);
2686 spin_lock_init(&mb2_transfer.auto_pm_lock);
2687 spin_lock_init(&mb3_transfer.lock);
2688 mutex_init(&mb3_transfer.sysclk_lock);
2689 init_completion(&mb3_transfer.sysclk_work);
2690 mutex_init(&mb4_transfer.lock);
2691 init_completion(&mb4_transfer.work);
2692 mutex_init(&mb5_transfer.lock);
2693 init_completion(&mb5_transfer.work);
2694
2695 INIT_WORK(&mb0_transfer.mask_work, prcmu_mask_work);
2696}
2697
2698static void init_prcm_registers(void)
2699{
2700 u32 val;
2701
2702 val = readl(PRCM_A9PL_FORCE_CLKEN);
2703 val &= ~(PRCM_A9PL_FORCE_CLKEN_PRCM_A9PL_FORCE_CLKEN |
2704 PRCM_A9PL_FORCE_CLKEN_PRCM_A9AXI_FORCE_CLKEN);
2705 writel(val, (PRCM_A9PL_FORCE_CLKEN));
2706}
2707
2708/*
2709 * Power domain switches (ePODs) modeled as regulators for the DB8500 SoC
2710 */
2711static struct regulator_consumer_supply db8500_vape_consumers[] = {
2712 REGULATOR_SUPPLY("v-ape", NULL),
2713 REGULATOR_SUPPLY("v-i2c", "nmk-i2c.0"),
2714 REGULATOR_SUPPLY("v-i2c", "nmk-i2c.1"),
2715 REGULATOR_SUPPLY("v-i2c", "nmk-i2c.2"),
2716 REGULATOR_SUPPLY("v-i2c", "nmk-i2c.3"),
2717 REGULATOR_SUPPLY("v-i2c", "nmk-i2c.4"),
2718 /* "v-mmc" changed to "vcore" in the mainline kernel */
2719 REGULATOR_SUPPLY("vcore", "sdi0"),
2720 REGULATOR_SUPPLY("vcore", "sdi1"),
2721 REGULATOR_SUPPLY("vcore", "sdi2"),
2722 REGULATOR_SUPPLY("vcore", "sdi3"),
2723 REGULATOR_SUPPLY("vcore", "sdi4"),
2724 REGULATOR_SUPPLY("v-dma", "dma40.0"),
2725 REGULATOR_SUPPLY("v-ape", "ab8500-usb.0"),
2726 /* "v-uart" changed to "vcore" in the mainline kernel */
2727 REGULATOR_SUPPLY("vcore", "uart0"),
2728 REGULATOR_SUPPLY("vcore", "uart1"),
2729 REGULATOR_SUPPLY("vcore", "uart2"),
2730 REGULATOR_SUPPLY("v-ape", "nmk-ske-keypad.0"),
2731 REGULATOR_SUPPLY("v-hsi", "ste_hsi.0"),
2732 REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
2733};
2734
2735static struct regulator_consumer_supply db8500_vsmps2_consumers[] = {
2736 REGULATOR_SUPPLY("musb_1v8", "ab8500-usb.0"),
2737 /* AV8100 regulator */
2738 REGULATOR_SUPPLY("hdmi_1v8", "0-0070"),
2739};
2740
2741static struct regulator_consumer_supply db8500_b2r2_mcde_consumers[] = {
2742 REGULATOR_SUPPLY("vsupply", "b2r2_bus"),
2743 REGULATOR_SUPPLY("vsupply", "mcde"),
2744};
2745
2746/* SVA MMDSP regulator switch */
2747static struct regulator_consumer_supply db8500_svammdsp_consumers[] = {
2748 REGULATOR_SUPPLY("sva-mmdsp", "cm_control"),
2749};
2750
2751/* SVA pipe regulator switch */
2752static struct regulator_consumer_supply db8500_svapipe_consumers[] = {
2753 REGULATOR_SUPPLY("sva-pipe", "cm_control"),
2754};
2755
2756/* SIA MMDSP regulator switch */
2757static struct regulator_consumer_supply db8500_siammdsp_consumers[] = {
2758 REGULATOR_SUPPLY("sia-mmdsp", "cm_control"),
2759};
2760
2761/* SIA pipe regulator switch */
2762static struct regulator_consumer_supply db8500_siapipe_consumers[] = {
2763 REGULATOR_SUPPLY("sia-pipe", "cm_control"),
2764};
2765
2766static struct regulator_consumer_supply db8500_sga_consumers[] = {
2767 REGULATOR_SUPPLY("v-mali", NULL),
2768};
2769
2770/* ESRAM1 and 2 regulator switch */
2771static struct regulator_consumer_supply db8500_esram12_consumers[] = {
2772 REGULATOR_SUPPLY("esram12", "cm_control"),
2773};
2774
2775/* ESRAM3 and 4 regulator switch */
2776static struct regulator_consumer_supply db8500_esram34_consumers[] = {
2777 REGULATOR_SUPPLY("v-esram34", "mcde"),
2778 REGULATOR_SUPPLY("esram34", "cm_control"),
2779 REGULATOR_SUPPLY("lcla_esram", "dma40.0"),
2780};
2781
2782static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = {
2783 [DB8500_REGULATOR_VAPE] = {
2784 .constraints = {
2785 .name = "db8500-vape",
2786 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
2787 .always_on = true,
2788 },
2789 .consumer_supplies = db8500_vape_consumers,
2790 .num_consumer_supplies = ARRAY_SIZE(db8500_vape_consumers),
2791 },
2792 [DB8500_REGULATOR_VARM] = {
2793 .constraints = {
2794 .name = "db8500-varm",
2795 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
2796 },
2797 },
2798 [DB8500_REGULATOR_VMODEM] = {
2799 .constraints = {
2800 .name = "db8500-vmodem",
2801 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
2802 },
2803 },
2804 [DB8500_REGULATOR_VPLL] = {
2805 .constraints = {
2806 .name = "db8500-vpll",
2807 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
2808 },
2809 },
2810 [DB8500_REGULATOR_VSMPS1] = {
2811 .constraints = {
2812 .name = "db8500-vsmps1",
2813 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
2814 },
2815 },
2816 [DB8500_REGULATOR_VSMPS2] = {
2817 .constraints = {
2818 .name = "db8500-vsmps2",
2819 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
2820 },
2821 .consumer_supplies = db8500_vsmps2_consumers,
2822 .num_consumer_supplies = ARRAY_SIZE(db8500_vsmps2_consumers),
2823 },
2824 [DB8500_REGULATOR_VSMPS3] = {
2825 .constraints = {
2826 .name = "db8500-vsmps3",
2827 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
2828 },
2829 },
2830 [DB8500_REGULATOR_VRF1] = {
2831 .constraints = {
2832 .name = "db8500-vrf1",
2833 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
2834 },
2835 },
2836 [DB8500_REGULATOR_SWITCH_SVAMMDSP] = {
2837 /* dependency to u8500-vape is handled outside regulator framework */
2838 .constraints = {
2839 .name = "db8500-sva-mmdsp",
2840 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
2841 },
2842 .consumer_supplies = db8500_svammdsp_consumers,
2843 .num_consumer_supplies = ARRAY_SIZE(db8500_svammdsp_consumers),
2844 },
2845 [DB8500_REGULATOR_SWITCH_SVAMMDSPRET] = {
2846 .constraints = {
2847 /* "ret" means "retention" */
2848 .name = "db8500-sva-mmdsp-ret",
2849 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
2850 },
2851 },
2852 [DB8500_REGULATOR_SWITCH_SVAPIPE] = {
2853 /* dependency to u8500-vape is handled outside regulator framework */
2854 .constraints = {
2855 .name = "db8500-sva-pipe",
2856 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
2857 },
2858 .consumer_supplies = db8500_svapipe_consumers,
2859 .num_consumer_supplies = ARRAY_SIZE(db8500_svapipe_consumers),
2860 },
2861 [DB8500_REGULATOR_SWITCH_SIAMMDSP] = {
2862 /* dependency to u8500-vape is handled outside regulator framework */
2863 .constraints = {
2864 .name = "db8500-sia-mmdsp",
2865 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
2866 },
2867 .consumer_supplies = db8500_siammdsp_consumers,
2868 .num_consumer_supplies = ARRAY_SIZE(db8500_siammdsp_consumers),
2869 },
2870 [DB8500_REGULATOR_SWITCH_SIAMMDSPRET] = {
2871 .constraints = {
2872 .name = "db8500-sia-mmdsp-ret",
2873 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
2874 },
2875 },
2876 [DB8500_REGULATOR_SWITCH_SIAPIPE] = {
2877 /* dependency to u8500-vape is handled outside regulator framework */
2878 .constraints = {
2879 .name = "db8500-sia-pipe",
2880 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
2881 },
2882 .consumer_supplies = db8500_siapipe_consumers,
2883 .num_consumer_supplies = ARRAY_SIZE(db8500_siapipe_consumers),
2884 },
2885 [DB8500_REGULATOR_SWITCH_SGA] = {
2886 .supply_regulator = "db8500-vape",
2887 .constraints = {
2888 .name = "db8500-sga",
2889 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
2890 },
2891 .consumer_supplies = db8500_sga_consumers,
2892 .num_consumer_supplies = ARRAY_SIZE(db8500_sga_consumers),
2893
2894 },
2895 [DB8500_REGULATOR_SWITCH_B2R2_MCDE] = {
2896 .supply_regulator = "db8500-vape",
2897 .constraints = {
2898 .name = "db8500-b2r2-mcde",
2899 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
2900 },
2901 .consumer_supplies = db8500_b2r2_mcde_consumers,
2902 .num_consumer_supplies = ARRAY_SIZE(db8500_b2r2_mcde_consumers),
2903 },
2904 [DB8500_REGULATOR_SWITCH_ESRAM12] = {
2905 /*
2906 * esram12 is set in retention and supplied by Vsafe when Vape is off,
2907 * no need to hold Vape
2908 */
2909 .constraints = {
2910 .name = "db8500-esram12",
2911 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
2912 },
2913 .consumer_supplies = db8500_esram12_consumers,
2914 .num_consumer_supplies = ARRAY_SIZE(db8500_esram12_consumers),
2915 },
2916 [DB8500_REGULATOR_SWITCH_ESRAM12RET] = {
2917 .constraints = {
2918 .name = "db8500-esram12-ret",
2919 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
2920 },
2921 },
2922 [DB8500_REGULATOR_SWITCH_ESRAM34] = {
2923 /*
2924 * esram34 is set in retention and supplied by Vsafe when Vape is off,
2925 * no need to hold Vape
2926 */
2927 .constraints = {
2928 .name = "db8500-esram34",
2929 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
2930 },
2931 .consumer_supplies = db8500_esram34_consumers,
2932 .num_consumer_supplies = ARRAY_SIZE(db8500_esram34_consumers),
2933 },
2934 [DB8500_REGULATOR_SWITCH_ESRAM34RET] = {
2935 .constraints = {
2936 .name = "db8500-esram34-ret",
2937 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
2938 },
2939 },
2940};
2941
2942static struct ux500_wdt_data db8500_wdt_pdata = {
2943 .timeout = 600, /* 10 minutes */
2944 .has_28_bits_resolution = true,
2945};
2946
2947static const struct mfd_cell common_prcmu_devs[] = {
2948 {
2949 .name = "ux500_wdt",
2950 .platform_data = &db8500_wdt_pdata,
2951 .pdata_size = sizeof(db8500_wdt_pdata),
2952 .id = -1,
2953 },
2954};
2955
2956static const struct mfd_cell db8500_prcmu_devs[] = {
2957 OF_MFD_CELL("db8500-prcmu-regulators", NULL,
2958 &db8500_regulators, sizeof(db8500_regulators), 0,
2959 "stericsson,db8500-prcmu-regulator"),
2960 OF_MFD_CELL("cpuidle-dbx500",
2961 NULL, NULL, 0, 0, "stericsson,cpuidle-dbx500"),
2962 OF_MFD_CELL("db8500-thermal",
2963 NULL, NULL, 0, 0, "stericsson,db8500-thermal"),
2964};
2965
2966static int db8500_prcmu_register_ab8500(struct device *parent)
2967{
2968 struct device_node *np;
2969 struct resource ab850x_resource;
2970 const struct mfd_cell ab8500_cell = {
2971 .name = "ab8500-core",
2972 .of_compatible = "stericsson,ab8500",
2973 .id = AB8500_VERSION_AB8500,
2974 .resources = &ab850x_resource,
2975 .num_resources = 1,
2976 };
2977 const struct mfd_cell ab8505_cell = {
2978 .name = "ab8505-core",
2979 .of_compatible = "stericsson,ab8505",
2980 .id = AB8500_VERSION_AB8505,
2981 .resources = &ab850x_resource,
2982 .num_resources = 1,
2983 };
2984 const struct mfd_cell *ab850x_cell;
2985
2986 if (!parent->of_node)
2987 return -ENODEV;
2988
2989 /* Look up the device node, sneak the IRQ out of it */
2990 for_each_child_of_node(parent->of_node, np) {
2991 if (of_device_is_compatible(np, ab8500_cell.of_compatible)) {
2992 ab850x_cell = &ab8500_cell;
2993 break;
2994 }
2995 if (of_device_is_compatible(np, ab8505_cell.of_compatible)) {
2996 ab850x_cell = &ab8505_cell;
2997 break;
2998 }
2999 }
3000 if (!np) {
3001 dev_info(parent, "could not find AB850X node in the device tree\n");
3002 return -ENODEV;
3003 }
3004 of_irq_to_resource_table(np, &ab850x_resource, 1);
3005
3006 return mfd_add_devices(parent, 0, ab850x_cell, 1, NULL, 0, NULL);
3007}
3008
3009static int db8500_prcmu_probe(struct platform_device *pdev)
3010{
3011 struct device_node *np = pdev->dev.of_node;
3012 int irq = 0, err = 0;
3013 struct resource *res;
3014
3015 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "prcmu");
3016 if (!res) {
3017 dev_err(&pdev->dev, "no prcmu memory region provided\n");
3018 return -EINVAL;
3019 }
3020 prcmu_base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
3021 if (!prcmu_base) {
3022 dev_err(&pdev->dev,
3023 "failed to ioremap prcmu register memory\n");
3024 return -ENOMEM;
3025 }
3026 init_prcm_registers();
3027 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "prcmu-tcdm");
3028 if (!res) {
3029 dev_err(&pdev->dev, "no prcmu tcdm region provided\n");
3030 return -EINVAL;
3031 }
3032 tcdm_base = devm_ioremap(&pdev->dev, res->start,
3033 resource_size(res));
3034 if (!tcdm_base) {
3035 dev_err(&pdev->dev,
3036 "failed to ioremap prcmu-tcdm register memory\n");
3037 return -ENOMEM;
3038 }
3039
3040 /* Clean up the mailbox interrupts after pre-kernel code. */
3041 writel(ALL_MBOX_BITS, PRCM_ARM_IT1_CLR);
3042
3043 irq = platform_get_irq(pdev, 0);
3044 if (irq <= 0)
3045 return irq;
3046
3047 err = request_threaded_irq(irq, prcmu_irq_handler,
3048 prcmu_irq_thread_fn, IRQF_NO_SUSPEND, "prcmu", NULL);
3049 if (err < 0) {
3050 pr_err("prcmu: Failed to allocate IRQ_DB8500_PRCMU1.\n");
3051 return err;
3052 }
3053
3054 db8500_irq_init(np);
3055
3056 prcmu_config_esram0_deep_sleep(ESRAM0_DEEP_SLEEP_STATE_RET);
3057
3058 err = mfd_add_devices(&pdev->dev, 0, common_prcmu_devs,
3059 ARRAY_SIZE(common_prcmu_devs), NULL, 0, db8500_irq_domain);
3060 if (err) {
3061 pr_err("prcmu: Failed to add subdevices\n");
3062 return err;
3063 }
3064
3065 /* TODO: Remove restriction when clk definitions are available. */
3066 if (!of_machine_is_compatible("st-ericsson,u8540")) {
3067 err = mfd_add_devices(&pdev->dev, 0, db8500_prcmu_devs,
3068 ARRAY_SIZE(db8500_prcmu_devs), NULL, 0,
3069 db8500_irq_domain);
3070 if (err) {
3071 mfd_remove_devices(&pdev->dev);
3072 pr_err("prcmu: Failed to add subdevices\n");
3073 return err;
3074 }
3075 }
3076
3077 err = db8500_prcmu_register_ab8500(&pdev->dev);
3078 if (err) {
3079 mfd_remove_devices(&pdev->dev);
3080 pr_err("prcmu: Failed to add ab8500 subdevice\n");
3081 return err;
3082 }
3083
3084 pr_info("DB8500 PRCMU initialized\n");
3085 return err;
3086}
3087static const struct of_device_id db8500_prcmu_match[] = {
3088 { .compatible = "stericsson,db8500-prcmu"},
3089 { },
3090};
3091
3092static struct platform_driver db8500_prcmu_driver = {
3093 .driver = {
3094 .name = "db8500-prcmu",
3095 .of_match_table = db8500_prcmu_match,
3096 },
3097 .probe = db8500_prcmu_probe,
3098};
3099
3100static int __init db8500_prcmu_init(void)
3101{
3102 return platform_driver_register(&db8500_prcmu_driver);
3103}
3104core_initcall(db8500_prcmu_init);
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * DB8500 PRCM Unit driver
4 *
5 * Copyright (C) STMicroelectronics 2009
6 * Copyright (C) ST-Ericsson SA 2010
7 *
8 * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
9 * Author: Sundar Iyer <sundar.iyer@stericsson.com>
10 * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
11 *
12 * U8500 PRCM Unit interface driver
13 */
14#include <linux/init.h>
15#include <linux/export.h>
16#include <linux/kernel.h>
17#include <linux/delay.h>
18#include <linux/errno.h>
19#include <linux/err.h>
20#include <linux/spinlock.h>
21#include <linux/io.h>
22#include <linux/slab.h>
23#include <linux/mutex.h>
24#include <linux/completion.h>
25#include <linux/irq.h>
26#include <linux/jiffies.h>
27#include <linux/bitops.h>
28#include <linux/fs.h>
29#include <linux/of.h>
30#include <linux/of_irq.h>
31#include <linux/platform_device.h>
32#include <linux/uaccess.h>
33#include <linux/mfd/core.h>
34#include <linux/mfd/dbx500-prcmu.h>
35#include <linux/mfd/abx500/ab8500.h>
36#include <linux/regulator/db8500-prcmu.h>
37#include <linux/regulator/machine.h>
38#include <linux/platform_data/ux500_wdt.h>
39#include "dbx500-prcmu-regs.h"
40
41/* Index of different voltages to be used when accessing AVSData */
42#define PRCM_AVS_BASE 0x2FC
43#define PRCM_AVS_VBB_RET (PRCM_AVS_BASE + 0x0)
44#define PRCM_AVS_VBB_MAX_OPP (PRCM_AVS_BASE + 0x1)
45#define PRCM_AVS_VBB_100_OPP (PRCM_AVS_BASE + 0x2)
46#define PRCM_AVS_VBB_50_OPP (PRCM_AVS_BASE + 0x3)
47#define PRCM_AVS_VARM_MAX_OPP (PRCM_AVS_BASE + 0x4)
48#define PRCM_AVS_VARM_100_OPP (PRCM_AVS_BASE + 0x5)
49#define PRCM_AVS_VARM_50_OPP (PRCM_AVS_BASE + 0x6)
50#define PRCM_AVS_VARM_RET (PRCM_AVS_BASE + 0x7)
51#define PRCM_AVS_VAPE_100_OPP (PRCM_AVS_BASE + 0x8)
52#define PRCM_AVS_VAPE_50_OPP (PRCM_AVS_BASE + 0x9)
53#define PRCM_AVS_VMOD_100_OPP (PRCM_AVS_BASE + 0xA)
54#define PRCM_AVS_VMOD_50_OPP (PRCM_AVS_BASE + 0xB)
55#define PRCM_AVS_VSAFE (PRCM_AVS_BASE + 0xC)
56
57#define PRCM_AVS_VOLTAGE 0
58#define PRCM_AVS_VOLTAGE_MASK 0x3f
59#define PRCM_AVS_ISSLOWSTARTUP 6
60#define PRCM_AVS_ISSLOWSTARTUP_MASK (1 << PRCM_AVS_ISSLOWSTARTUP)
61#define PRCM_AVS_ISMODEENABLE 7
62#define PRCM_AVS_ISMODEENABLE_MASK (1 << PRCM_AVS_ISMODEENABLE)
63
64#define PRCM_BOOT_STATUS 0xFFF
65#define PRCM_ROMCODE_A2P 0xFFE
66#define PRCM_ROMCODE_P2A 0xFFD
67#define PRCM_XP70_CUR_PWR_STATE 0xFFC /* 4 BYTES */
68
69#define PRCM_SW_RST_REASON 0xFF8 /* 2 bytes */
70
71#define _PRCM_MBOX_HEADER 0xFE8 /* 16 bytes */
72#define PRCM_MBOX_HEADER_REQ_MB0 (_PRCM_MBOX_HEADER + 0x0)
73#define PRCM_MBOX_HEADER_REQ_MB1 (_PRCM_MBOX_HEADER + 0x1)
74#define PRCM_MBOX_HEADER_REQ_MB2 (_PRCM_MBOX_HEADER + 0x2)
75#define PRCM_MBOX_HEADER_REQ_MB3 (_PRCM_MBOX_HEADER + 0x3)
76#define PRCM_MBOX_HEADER_REQ_MB4 (_PRCM_MBOX_HEADER + 0x4)
77#define PRCM_MBOX_HEADER_REQ_MB5 (_PRCM_MBOX_HEADER + 0x5)
78#define PRCM_MBOX_HEADER_ACK_MB0 (_PRCM_MBOX_HEADER + 0x8)
79
80/* Req Mailboxes */
81#define PRCM_REQ_MB0 0xFDC /* 12 bytes */
82#define PRCM_REQ_MB1 0xFD0 /* 12 bytes */
83#define PRCM_REQ_MB2 0xFC0 /* 16 bytes */
84#define PRCM_REQ_MB3 0xE4C /* 372 bytes */
85#define PRCM_REQ_MB4 0xE48 /* 4 bytes */
86#define PRCM_REQ_MB5 0xE44 /* 4 bytes */
87
88/* Ack Mailboxes */
89#define PRCM_ACK_MB0 0xE08 /* 52 bytes */
90#define PRCM_ACK_MB1 0xE04 /* 4 bytes */
91#define PRCM_ACK_MB2 0xE00 /* 4 bytes */
92#define PRCM_ACK_MB3 0xDFC /* 4 bytes */
93#define PRCM_ACK_MB4 0xDF8 /* 4 bytes */
94#define PRCM_ACK_MB5 0xDF4 /* 4 bytes */
95
96/* Mailbox 0 headers */
97#define MB0H_POWER_STATE_TRANS 0
98#define MB0H_CONFIG_WAKEUPS_EXE 1
99#define MB0H_READ_WAKEUP_ACK 3
100#define MB0H_CONFIG_WAKEUPS_SLEEP 4
101
102#define MB0H_WAKEUP_EXE 2
103#define MB0H_WAKEUP_SLEEP 5
104
105/* Mailbox 0 REQs */
106#define PRCM_REQ_MB0_AP_POWER_STATE (PRCM_REQ_MB0 + 0x0)
107#define PRCM_REQ_MB0_AP_PLL_STATE (PRCM_REQ_MB0 + 0x1)
108#define PRCM_REQ_MB0_ULP_CLOCK_STATE (PRCM_REQ_MB0 + 0x2)
109#define PRCM_REQ_MB0_DO_NOT_WFI (PRCM_REQ_MB0 + 0x3)
110#define PRCM_REQ_MB0_WAKEUP_8500 (PRCM_REQ_MB0 + 0x4)
111#define PRCM_REQ_MB0_WAKEUP_4500 (PRCM_REQ_MB0 + 0x8)
112
113/* Mailbox 0 ACKs */
114#define PRCM_ACK_MB0_AP_PWRSTTR_STATUS (PRCM_ACK_MB0 + 0x0)
115#define PRCM_ACK_MB0_READ_POINTER (PRCM_ACK_MB0 + 0x1)
116#define PRCM_ACK_MB0_WAKEUP_0_8500 (PRCM_ACK_MB0 + 0x4)
117#define PRCM_ACK_MB0_WAKEUP_0_4500 (PRCM_ACK_MB0 + 0x8)
118#define PRCM_ACK_MB0_WAKEUP_1_8500 (PRCM_ACK_MB0 + 0x1C)
119#define PRCM_ACK_MB0_WAKEUP_1_4500 (PRCM_ACK_MB0 + 0x20)
120#define PRCM_ACK_MB0_EVENT_4500_NUMBERS 20
121
122/* Mailbox 1 headers */
123#define MB1H_ARM_APE_OPP 0x0
124#define MB1H_RESET_MODEM 0x2
125#define MB1H_REQUEST_APE_OPP_100_VOLT 0x3
126#define MB1H_RELEASE_APE_OPP_100_VOLT 0x4
127#define MB1H_RELEASE_USB_WAKEUP 0x5
128#define MB1H_PLL_ON_OFF 0x6
129
130/* Mailbox 1 Requests */
131#define PRCM_REQ_MB1_ARM_OPP (PRCM_REQ_MB1 + 0x0)
132#define PRCM_REQ_MB1_APE_OPP (PRCM_REQ_MB1 + 0x1)
133#define PRCM_REQ_MB1_PLL_ON_OFF (PRCM_REQ_MB1 + 0x4)
134#define PLL_SOC0_OFF 0x1
135#define PLL_SOC0_ON 0x2
136#define PLL_SOC1_OFF 0x4
137#define PLL_SOC1_ON 0x8
138
139/* Mailbox 1 ACKs */
140#define PRCM_ACK_MB1_CURRENT_ARM_OPP (PRCM_ACK_MB1 + 0x0)
141#define PRCM_ACK_MB1_CURRENT_APE_OPP (PRCM_ACK_MB1 + 0x1)
142#define PRCM_ACK_MB1_APE_VOLTAGE_STATUS (PRCM_ACK_MB1 + 0x2)
143#define PRCM_ACK_MB1_DVFS_STATUS (PRCM_ACK_MB1 + 0x3)
144
145/* Mailbox 2 headers */
146#define MB2H_DPS 0x0
147#define MB2H_AUTO_PWR 0x1
148
149/* Mailbox 2 REQs */
150#define PRCM_REQ_MB2_SVA_MMDSP (PRCM_REQ_MB2 + 0x0)
151#define PRCM_REQ_MB2_SVA_PIPE (PRCM_REQ_MB2 + 0x1)
152#define PRCM_REQ_MB2_SIA_MMDSP (PRCM_REQ_MB2 + 0x2)
153#define PRCM_REQ_MB2_SIA_PIPE (PRCM_REQ_MB2 + 0x3)
154#define PRCM_REQ_MB2_SGA (PRCM_REQ_MB2 + 0x4)
155#define PRCM_REQ_MB2_B2R2_MCDE (PRCM_REQ_MB2 + 0x5)
156#define PRCM_REQ_MB2_ESRAM12 (PRCM_REQ_MB2 + 0x6)
157#define PRCM_REQ_MB2_ESRAM34 (PRCM_REQ_MB2 + 0x7)
158#define PRCM_REQ_MB2_AUTO_PM_SLEEP (PRCM_REQ_MB2 + 0x8)
159#define PRCM_REQ_MB2_AUTO_PM_IDLE (PRCM_REQ_MB2 + 0xC)
160
161/* Mailbox 2 ACKs */
162#define PRCM_ACK_MB2_DPS_STATUS (PRCM_ACK_MB2 + 0x0)
163#define HWACC_PWR_ST_OK 0xFE
164
165/* Mailbox 3 headers */
166#define MB3H_ANC 0x0
167#define MB3H_SIDETONE 0x1
168#define MB3H_SYSCLK 0xE
169
170/* Mailbox 3 Requests */
171#define PRCM_REQ_MB3_ANC_FIR_COEFF (PRCM_REQ_MB3 + 0x0)
172#define PRCM_REQ_MB3_ANC_IIR_COEFF (PRCM_REQ_MB3 + 0x20)
173#define PRCM_REQ_MB3_ANC_SHIFTER (PRCM_REQ_MB3 + 0x60)
174#define PRCM_REQ_MB3_ANC_WARP (PRCM_REQ_MB3 + 0x64)
175#define PRCM_REQ_MB3_SIDETONE_FIR_GAIN (PRCM_REQ_MB3 + 0x68)
176#define PRCM_REQ_MB3_SIDETONE_FIR_COEFF (PRCM_REQ_MB3 + 0x6C)
177#define PRCM_REQ_MB3_SYSCLK_MGT (PRCM_REQ_MB3 + 0x16C)
178
179/* Mailbox 4 headers */
180#define MB4H_DDR_INIT 0x0
181#define MB4H_MEM_ST 0x1
182#define MB4H_HOTDOG 0x12
183#define MB4H_HOTMON 0x13
184#define MB4H_HOT_PERIOD 0x14
185#define MB4H_A9WDOG_CONF 0x16
186#define MB4H_A9WDOG_EN 0x17
187#define MB4H_A9WDOG_DIS 0x18
188#define MB4H_A9WDOG_LOAD 0x19
189#define MB4H_A9WDOG_KICK 0x20
190
191/* Mailbox 4 Requests */
192#define PRCM_REQ_MB4_DDR_ST_AP_SLEEP_IDLE (PRCM_REQ_MB4 + 0x0)
193#define PRCM_REQ_MB4_DDR_ST_AP_DEEP_IDLE (PRCM_REQ_MB4 + 0x1)
194#define PRCM_REQ_MB4_ESRAM0_ST (PRCM_REQ_MB4 + 0x3)
195#define PRCM_REQ_MB4_HOTDOG_THRESHOLD (PRCM_REQ_MB4 + 0x0)
196#define PRCM_REQ_MB4_HOTMON_LOW (PRCM_REQ_MB4 + 0x0)
197#define PRCM_REQ_MB4_HOTMON_HIGH (PRCM_REQ_MB4 + 0x1)
198#define PRCM_REQ_MB4_HOTMON_CONFIG (PRCM_REQ_MB4 + 0x2)
199#define PRCM_REQ_MB4_HOT_PERIOD (PRCM_REQ_MB4 + 0x0)
200#define HOTMON_CONFIG_LOW BIT(0)
201#define HOTMON_CONFIG_HIGH BIT(1)
202#define PRCM_REQ_MB4_A9WDOG_0 (PRCM_REQ_MB4 + 0x0)
203#define PRCM_REQ_MB4_A9WDOG_1 (PRCM_REQ_MB4 + 0x1)
204#define PRCM_REQ_MB4_A9WDOG_2 (PRCM_REQ_MB4 + 0x2)
205#define PRCM_REQ_MB4_A9WDOG_3 (PRCM_REQ_MB4 + 0x3)
206#define A9WDOG_AUTO_OFF_EN BIT(7)
207#define A9WDOG_AUTO_OFF_DIS 0
208#define A9WDOG_ID_MASK 0xf
209
210/* Mailbox 5 Requests */
211#define PRCM_REQ_MB5_I2C_SLAVE_OP (PRCM_REQ_MB5 + 0x0)
212#define PRCM_REQ_MB5_I2C_HW_BITS (PRCM_REQ_MB5 + 0x1)
213#define PRCM_REQ_MB5_I2C_REG (PRCM_REQ_MB5 + 0x2)
214#define PRCM_REQ_MB5_I2C_VAL (PRCM_REQ_MB5 + 0x3)
215#define PRCMU_I2C_WRITE(slave) (((slave) << 1) | BIT(6))
216#define PRCMU_I2C_READ(slave) (((slave) << 1) | BIT(0) | BIT(6))
217#define PRCMU_I2C_STOP_EN BIT(3)
218
219/* Mailbox 5 ACKs */
220#define PRCM_ACK_MB5_I2C_STATUS (PRCM_ACK_MB5 + 0x1)
221#define PRCM_ACK_MB5_I2C_VAL (PRCM_ACK_MB5 + 0x3)
222#define I2C_WR_OK 0x1
223#define I2C_RD_OK 0x2
224
225#define NUM_MB 8
226#define MBOX_BIT BIT
227#define ALL_MBOX_BITS (MBOX_BIT(NUM_MB) - 1)
228
229/*
230 * Wakeups/IRQs
231 */
232
233#define WAKEUP_BIT_RTC BIT(0)
234#define WAKEUP_BIT_RTT0 BIT(1)
235#define WAKEUP_BIT_RTT1 BIT(2)
236#define WAKEUP_BIT_HSI0 BIT(3)
237#define WAKEUP_BIT_HSI1 BIT(4)
238#define WAKEUP_BIT_CA_WAKE BIT(5)
239#define WAKEUP_BIT_USB BIT(6)
240#define WAKEUP_BIT_ABB BIT(7)
241#define WAKEUP_BIT_ABB_FIFO BIT(8)
242#define WAKEUP_BIT_SYSCLK_OK BIT(9)
243#define WAKEUP_BIT_CA_SLEEP BIT(10)
244#define WAKEUP_BIT_AC_WAKE_ACK BIT(11)
245#define WAKEUP_BIT_SIDE_TONE_OK BIT(12)
246#define WAKEUP_BIT_ANC_OK BIT(13)
247#define WAKEUP_BIT_SW_ERROR BIT(14)
248#define WAKEUP_BIT_AC_SLEEP_ACK BIT(15)
249#define WAKEUP_BIT_ARM BIT(17)
250#define WAKEUP_BIT_HOTMON_LOW BIT(18)
251#define WAKEUP_BIT_HOTMON_HIGH BIT(19)
252#define WAKEUP_BIT_MODEM_SW_RESET_REQ BIT(20)
253#define WAKEUP_BIT_GPIO0 BIT(23)
254#define WAKEUP_BIT_GPIO1 BIT(24)
255#define WAKEUP_BIT_GPIO2 BIT(25)
256#define WAKEUP_BIT_GPIO3 BIT(26)
257#define WAKEUP_BIT_GPIO4 BIT(27)
258#define WAKEUP_BIT_GPIO5 BIT(28)
259#define WAKEUP_BIT_GPIO6 BIT(29)
260#define WAKEUP_BIT_GPIO7 BIT(30)
261#define WAKEUP_BIT_GPIO8 BIT(31)
262
263static struct {
264 bool valid;
265 struct prcmu_fw_version version;
266} fw_info;
267
268static struct irq_domain *db8500_irq_domain;
269
270/*
271 * This vector maps irq numbers to the bits in the bit field used in
272 * communication with the PRCMU firmware.
273 *
274 * The reason for having this is to keep the irq numbers contiguous even though
275 * the bits in the bit field are not. (The bits also have a tendency to move
276 * around, to further complicate matters.)
277 */
278#define IRQ_INDEX(_name) ((IRQ_PRCMU_##_name))
279#define IRQ_ENTRY(_name)[IRQ_INDEX(_name)] = (WAKEUP_BIT_##_name)
280
281#define IRQ_PRCMU_RTC 0
282#define IRQ_PRCMU_RTT0 1
283#define IRQ_PRCMU_RTT1 2
284#define IRQ_PRCMU_HSI0 3
285#define IRQ_PRCMU_HSI1 4
286#define IRQ_PRCMU_CA_WAKE 5
287#define IRQ_PRCMU_USB 6
288#define IRQ_PRCMU_ABB 7
289#define IRQ_PRCMU_ABB_FIFO 8
290#define IRQ_PRCMU_ARM 9
291#define IRQ_PRCMU_MODEM_SW_RESET_REQ 10
292#define IRQ_PRCMU_GPIO0 11
293#define IRQ_PRCMU_GPIO1 12
294#define IRQ_PRCMU_GPIO2 13
295#define IRQ_PRCMU_GPIO3 14
296#define IRQ_PRCMU_GPIO4 15
297#define IRQ_PRCMU_GPIO5 16
298#define IRQ_PRCMU_GPIO6 17
299#define IRQ_PRCMU_GPIO7 18
300#define IRQ_PRCMU_GPIO8 19
301#define IRQ_PRCMU_CA_SLEEP 20
302#define IRQ_PRCMU_HOTMON_LOW 21
303#define IRQ_PRCMU_HOTMON_HIGH 22
304#define NUM_PRCMU_WAKEUPS 23
305
306static u32 prcmu_irq_bit[NUM_PRCMU_WAKEUPS] = {
307 IRQ_ENTRY(RTC),
308 IRQ_ENTRY(RTT0),
309 IRQ_ENTRY(RTT1),
310 IRQ_ENTRY(HSI0),
311 IRQ_ENTRY(HSI1),
312 IRQ_ENTRY(CA_WAKE),
313 IRQ_ENTRY(USB),
314 IRQ_ENTRY(ABB),
315 IRQ_ENTRY(ABB_FIFO),
316 IRQ_ENTRY(CA_SLEEP),
317 IRQ_ENTRY(ARM),
318 IRQ_ENTRY(HOTMON_LOW),
319 IRQ_ENTRY(HOTMON_HIGH),
320 IRQ_ENTRY(MODEM_SW_RESET_REQ),
321 IRQ_ENTRY(GPIO0),
322 IRQ_ENTRY(GPIO1),
323 IRQ_ENTRY(GPIO2),
324 IRQ_ENTRY(GPIO3),
325 IRQ_ENTRY(GPIO4),
326 IRQ_ENTRY(GPIO5),
327 IRQ_ENTRY(GPIO6),
328 IRQ_ENTRY(GPIO7),
329 IRQ_ENTRY(GPIO8)
330};
331
332#define VALID_WAKEUPS (BIT(NUM_PRCMU_WAKEUP_INDICES) - 1)
333#define WAKEUP_ENTRY(_name)[PRCMU_WAKEUP_INDEX_##_name] = (WAKEUP_BIT_##_name)
334static u32 prcmu_wakeup_bit[NUM_PRCMU_WAKEUP_INDICES] = {
335 WAKEUP_ENTRY(RTC),
336 WAKEUP_ENTRY(RTT0),
337 WAKEUP_ENTRY(RTT1),
338 WAKEUP_ENTRY(HSI0),
339 WAKEUP_ENTRY(HSI1),
340 WAKEUP_ENTRY(USB),
341 WAKEUP_ENTRY(ABB),
342 WAKEUP_ENTRY(ABB_FIFO),
343 WAKEUP_ENTRY(ARM)
344};
345
346/*
347 * mb0_transfer - state needed for mailbox 0 communication.
348 * @lock: The transaction lock.
349 * @dbb_events_lock: A lock used to handle concurrent access to (parts of)
350 * the request data.
351 * @mask_work: Work structure used for (un)masking wakeup interrupts.
352 * @req: Request data that need to persist between requests.
353 */
354static struct {
355 spinlock_t lock;
356 spinlock_t dbb_irqs_lock;
357 struct work_struct mask_work;
358 struct mutex ac_wake_lock;
359 struct completion ac_wake_work;
360 struct {
361 u32 dbb_irqs;
362 u32 dbb_wakeups;
363 u32 abb_events;
364 } req;
365} mb0_transfer;
366
367/*
368 * mb1_transfer - state needed for mailbox 1 communication.
369 * @lock: The transaction lock.
370 * @work: The transaction completion structure.
371 * @ape_opp: The current APE OPP.
372 * @ack: Reply ("acknowledge") data.
373 */
374static struct {
375 struct mutex lock;
376 struct completion work;
377 u8 ape_opp;
378 struct {
379 u8 header;
380 u8 arm_opp;
381 u8 ape_opp;
382 u8 ape_voltage_status;
383 } ack;
384} mb1_transfer;
385
386/*
387 * mb2_transfer - state needed for mailbox 2 communication.
388 * @lock: The transaction lock.
389 * @work: The transaction completion structure.
390 * @auto_pm_lock: The autonomous power management configuration lock.
391 * @auto_pm_enabled: A flag indicating whether autonomous PM is enabled.
392 * @req: Request data that need to persist between requests.
393 * @ack: Reply ("acknowledge") data.
394 */
395static struct {
396 struct mutex lock;
397 struct completion work;
398 spinlock_t auto_pm_lock;
399 bool auto_pm_enabled;
400 struct {
401 u8 status;
402 } ack;
403} mb2_transfer;
404
405/*
406 * mb3_transfer - state needed for mailbox 3 communication.
407 * @lock: The request lock.
408 * @sysclk_lock: A lock used to handle concurrent sysclk requests.
409 * @sysclk_work: Work structure used for sysclk requests.
410 */
411static struct {
412 spinlock_t lock;
413 struct mutex sysclk_lock;
414 struct completion sysclk_work;
415} mb3_transfer;
416
417/*
418 * mb4_transfer - state needed for mailbox 4 communication.
419 * @lock: The transaction lock.
420 * @work: The transaction completion structure.
421 */
422static struct {
423 struct mutex lock;
424 struct completion work;
425} mb4_transfer;
426
427/*
428 * mb5_transfer - state needed for mailbox 5 communication.
429 * @lock: The transaction lock.
430 * @work: The transaction completion structure.
431 * @ack: Reply ("acknowledge") data.
432 */
433static struct {
434 struct mutex lock;
435 struct completion work;
436 struct {
437 u8 status;
438 u8 value;
439 } ack;
440} mb5_transfer;
441
442static atomic_t ac_wake_req_state = ATOMIC_INIT(0);
443
444/* Spinlocks */
445static DEFINE_SPINLOCK(prcmu_lock);
446static DEFINE_SPINLOCK(clkout_lock);
447
448/* Global var to runtime determine TCDM base for v2 or v1 */
449static __iomem void *tcdm_base;
450static __iomem void *prcmu_base;
451
452struct clk_mgt {
453 u32 offset;
454 u32 pllsw;
455 int branch;
456 bool clk38div;
457};
458
459enum {
460 PLL_RAW,
461 PLL_FIX,
462 PLL_DIV
463};
464
465static DEFINE_SPINLOCK(clk_mgt_lock);
466
467#define CLK_MGT_ENTRY(_name, _branch, _clk38div)[PRCMU_##_name] = \
468 { (PRCM_##_name##_MGT), 0 , _branch, _clk38div}
469static struct clk_mgt clk_mgt[PRCMU_NUM_REG_CLOCKS] = {
470 CLK_MGT_ENTRY(SGACLK, PLL_DIV, false),
471 CLK_MGT_ENTRY(UARTCLK, PLL_FIX, true),
472 CLK_MGT_ENTRY(MSP02CLK, PLL_FIX, true),
473 CLK_MGT_ENTRY(MSP1CLK, PLL_FIX, true),
474 CLK_MGT_ENTRY(I2CCLK, PLL_FIX, true),
475 CLK_MGT_ENTRY(SDMMCCLK, PLL_DIV, true),
476 CLK_MGT_ENTRY(SLIMCLK, PLL_FIX, true),
477 CLK_MGT_ENTRY(PER1CLK, PLL_DIV, true),
478 CLK_MGT_ENTRY(PER2CLK, PLL_DIV, true),
479 CLK_MGT_ENTRY(PER3CLK, PLL_DIV, true),
480 CLK_MGT_ENTRY(PER5CLK, PLL_DIV, true),
481 CLK_MGT_ENTRY(PER6CLK, PLL_DIV, true),
482 CLK_MGT_ENTRY(PER7CLK, PLL_DIV, true),
483 CLK_MGT_ENTRY(LCDCLK, PLL_FIX, true),
484 CLK_MGT_ENTRY(BMLCLK, PLL_DIV, true),
485 CLK_MGT_ENTRY(HSITXCLK, PLL_DIV, true),
486 CLK_MGT_ENTRY(HSIRXCLK, PLL_DIV, true),
487 CLK_MGT_ENTRY(HDMICLK, PLL_FIX, false),
488 CLK_MGT_ENTRY(APEATCLK, PLL_DIV, true),
489 CLK_MGT_ENTRY(APETRACECLK, PLL_DIV, true),
490 CLK_MGT_ENTRY(MCDECLK, PLL_DIV, true),
491 CLK_MGT_ENTRY(IPI2CCLK, PLL_FIX, true),
492 CLK_MGT_ENTRY(DSIALTCLK, PLL_FIX, false),
493 CLK_MGT_ENTRY(DMACLK, PLL_DIV, true),
494 CLK_MGT_ENTRY(B2R2CLK, PLL_DIV, true),
495 CLK_MGT_ENTRY(TVCLK, PLL_FIX, true),
496 CLK_MGT_ENTRY(SSPCLK, PLL_FIX, true),
497 CLK_MGT_ENTRY(RNGCLK, PLL_FIX, true),
498 CLK_MGT_ENTRY(UICCCLK, PLL_FIX, false),
499};
500
501struct dsiclk {
502 u32 divsel_mask;
503 u32 divsel_shift;
504 u32 divsel;
505};
506
507static struct dsiclk dsiclk[2] = {
508 {
509 .divsel_mask = PRCM_DSI_PLLOUT_SEL_DSI0_PLLOUT_DIVSEL_MASK,
510 .divsel_shift = PRCM_DSI_PLLOUT_SEL_DSI0_PLLOUT_DIVSEL_SHIFT,
511 .divsel = PRCM_DSI_PLLOUT_SEL_PHI,
512 },
513 {
514 .divsel_mask = PRCM_DSI_PLLOUT_SEL_DSI1_PLLOUT_DIVSEL_MASK,
515 .divsel_shift = PRCM_DSI_PLLOUT_SEL_DSI1_PLLOUT_DIVSEL_SHIFT,
516 .divsel = PRCM_DSI_PLLOUT_SEL_PHI,
517 }
518};
519
520struct dsiescclk {
521 u32 en;
522 u32 div_mask;
523 u32 div_shift;
524};
525
526static struct dsiescclk dsiescclk[3] = {
527 {
528 .en = PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_EN,
529 .div_mask = PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_DIV_MASK,
530 .div_shift = PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_DIV_SHIFT,
531 },
532 {
533 .en = PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_EN,
534 .div_mask = PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_DIV_MASK,
535 .div_shift = PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_DIV_SHIFT,
536 },
537 {
538 .en = PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_EN,
539 .div_mask = PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_DIV_MASK,
540 .div_shift = PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_DIV_SHIFT,
541 }
542};
543
544
545/*
546* Used by MCDE to setup all necessary PRCMU registers
547*/
548#define PRCMU_RESET_DSIPLL 0x00004000
549#define PRCMU_UNCLAMP_DSIPLL 0x00400800
550
551#define PRCMU_CLK_PLL_DIV_SHIFT 0
552#define PRCMU_CLK_PLL_SW_SHIFT 5
553#define PRCMU_CLK_38 (1 << 9)
554#define PRCMU_CLK_38_SRC (1 << 10)
555#define PRCMU_CLK_38_DIV (1 << 11)
556
557/* PLLDIV=12, PLLSW=4 (PLLDDR) */
558#define PRCMU_DSI_CLOCK_SETTING 0x0000008C
559
560/* DPI 50000000 Hz */
561#define PRCMU_DPI_CLOCK_SETTING ((1 << PRCMU_CLK_PLL_SW_SHIFT) | \
562 (16 << PRCMU_CLK_PLL_DIV_SHIFT))
563#define PRCMU_DSI_LP_CLOCK_SETTING 0x00000E00
564
565/* D=101, N=1, R=4, SELDIV2=0 */
566#define PRCMU_PLLDSI_FREQ_SETTING 0x00040165
567
568#define PRCMU_ENABLE_PLLDSI 0x00000001
569#define PRCMU_DISABLE_PLLDSI 0x00000000
570#define PRCMU_RELEASE_RESET_DSS 0x0000400C
571#define PRCMU_DSI_PLLOUT_SEL_SETTING 0x00000202
572/* ESC clk, div0=1, div1=1, div2=3 */
573#define PRCMU_ENABLE_ESCAPE_CLOCK_DIV 0x07030101
574#define PRCMU_DISABLE_ESCAPE_CLOCK_DIV 0x00030101
575#define PRCMU_DSI_RESET_SW 0x00000007
576
577#define PRCMU_PLLDSI_LOCKP_LOCKED 0x3
578
579int db8500_prcmu_enable_dsipll(void)
580{
581 int i;
582
583 /* Clear DSIPLL_RESETN */
584 writel(PRCMU_RESET_DSIPLL, PRCM_APE_RESETN_CLR);
585 /* Unclamp DSIPLL in/out */
586 writel(PRCMU_UNCLAMP_DSIPLL, PRCM_MMIP_LS_CLAMP_CLR);
587
588 /* Set DSI PLL FREQ */
589 writel(PRCMU_PLLDSI_FREQ_SETTING, PRCM_PLLDSI_FREQ);
590 writel(PRCMU_DSI_PLLOUT_SEL_SETTING, PRCM_DSI_PLLOUT_SEL);
591 /* Enable Escape clocks */
592 writel(PRCMU_ENABLE_ESCAPE_CLOCK_DIV, PRCM_DSITVCLK_DIV);
593
594 /* Start DSI PLL */
595 writel(PRCMU_ENABLE_PLLDSI, PRCM_PLLDSI_ENABLE);
596 /* Reset DSI PLL */
597 writel(PRCMU_DSI_RESET_SW, PRCM_DSI_SW_RESET);
598 for (i = 0; i < 10; i++) {
599 if ((readl(PRCM_PLLDSI_LOCKP) & PRCMU_PLLDSI_LOCKP_LOCKED)
600 == PRCMU_PLLDSI_LOCKP_LOCKED)
601 break;
602 udelay(100);
603 }
604 /* Set DSIPLL_RESETN */
605 writel(PRCMU_RESET_DSIPLL, PRCM_APE_RESETN_SET);
606 return 0;
607}
608
609int db8500_prcmu_disable_dsipll(void)
610{
611 /* Disable dsi pll */
612 writel(PRCMU_DISABLE_PLLDSI, PRCM_PLLDSI_ENABLE);
613 /* Disable escapeclock */
614 writel(PRCMU_DISABLE_ESCAPE_CLOCK_DIV, PRCM_DSITVCLK_DIV);
615 return 0;
616}
617
618int db8500_prcmu_set_display_clocks(void)
619{
620 unsigned long flags;
621
622 spin_lock_irqsave(&clk_mgt_lock, flags);
623
624 /* Grab the HW semaphore. */
625 while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
626 cpu_relax();
627
628 writel(PRCMU_DSI_CLOCK_SETTING, prcmu_base + PRCM_HDMICLK_MGT);
629 writel(PRCMU_DSI_LP_CLOCK_SETTING, prcmu_base + PRCM_TVCLK_MGT);
630 writel(PRCMU_DPI_CLOCK_SETTING, prcmu_base + PRCM_LCDCLK_MGT);
631
632 /* Release the HW semaphore. */
633 writel(0, PRCM_SEM);
634
635 spin_unlock_irqrestore(&clk_mgt_lock, flags);
636
637 return 0;
638}
639
640u32 db8500_prcmu_read(unsigned int reg)
641{
642 return readl(prcmu_base + reg);
643}
644
645void db8500_prcmu_write(unsigned int reg, u32 value)
646{
647 unsigned long flags;
648
649 spin_lock_irqsave(&prcmu_lock, flags);
650 writel(value, (prcmu_base + reg));
651 spin_unlock_irqrestore(&prcmu_lock, flags);
652}
653
654void db8500_prcmu_write_masked(unsigned int reg, u32 mask, u32 value)
655{
656 u32 val;
657 unsigned long flags;
658
659 spin_lock_irqsave(&prcmu_lock, flags);
660 val = readl(prcmu_base + reg);
661 val = ((val & ~mask) | (value & mask));
662 writel(val, (prcmu_base + reg));
663 spin_unlock_irqrestore(&prcmu_lock, flags);
664}
665
666struct prcmu_fw_version *prcmu_get_fw_version(void)
667{
668 return fw_info.valid ? &fw_info.version : NULL;
669}
670
671bool prcmu_has_arm_maxopp(void)
672{
673 return (readb(tcdm_base + PRCM_AVS_VARM_MAX_OPP) &
674 PRCM_AVS_ISMODEENABLE_MASK) == PRCM_AVS_ISMODEENABLE_MASK;
675}
676
677/**
678 * prcmu_set_rc_a2p - This function is used to run few power state sequences
679 * @val: Value to be set, i.e. transition requested
680 * Returns: 0 on success, -EINVAL on invalid argument
681 *
682 * This function is used to run the following power state sequences -
683 * any state to ApReset, ApDeepSleep to ApExecute, ApExecute to ApDeepSleep
684 */
685int prcmu_set_rc_a2p(enum romcode_write val)
686{
687 if (val < RDY_2_DS || val > RDY_2_XP70_RST)
688 return -EINVAL;
689 writeb(val, (tcdm_base + PRCM_ROMCODE_A2P));
690 return 0;
691}
692
693/**
694 * prcmu_get_rc_p2a - This function is used to get power state sequences
695 * Returns: the power transition that has last happened
696 *
697 * This function can return the following transitions-
698 * any state to ApReset, ApDeepSleep to ApExecute, ApExecute to ApDeepSleep
699 */
700enum romcode_read prcmu_get_rc_p2a(void)
701{
702 return readb(tcdm_base + PRCM_ROMCODE_P2A);
703}
704
705/**
706 * prcmu_get_current_mode - Return the current XP70 power mode
707 * Returns: Returns the current AP(ARM) power mode: init,
708 * apBoot, apExecute, apDeepSleep, apSleep, apIdle, apReset
709 */
710enum ap_pwrst prcmu_get_xp70_current_state(void)
711{
712 return readb(tcdm_base + PRCM_XP70_CUR_PWR_STATE);
713}
714
715/**
716 * prcmu_config_clkout - Configure one of the programmable clock outputs.
717 * @clkout: The CLKOUT number (0 or 1).
718 * @source: The clock to be used (one of the PRCMU_CLKSRC_*).
719 * @div: The divider to be applied.
720 *
721 * Configures one of the programmable clock outputs (CLKOUTs).
722 * @div should be in the range [1,63] to request a configuration, or 0 to
723 * inform that the configuration is no longer requested.
724 */
725int prcmu_config_clkout(u8 clkout, u8 source, u8 div)
726{
727 static int requests[2];
728 int r = 0;
729 unsigned long flags;
730 u32 val;
731 u32 bits;
732 u32 mask;
733 u32 div_mask;
734
735 BUG_ON(clkout > 1);
736 BUG_ON(div > 63);
737 BUG_ON((clkout == 0) && (source > PRCMU_CLKSRC_CLK009));
738
739 if (!div && !requests[clkout])
740 return -EINVAL;
741
742 if (clkout == 0) {
743 div_mask = PRCM_CLKOCR_CLKODIV0_MASK;
744 mask = (PRCM_CLKOCR_CLKODIV0_MASK | PRCM_CLKOCR_CLKOSEL0_MASK);
745 bits = ((source << PRCM_CLKOCR_CLKOSEL0_SHIFT) |
746 (div << PRCM_CLKOCR_CLKODIV0_SHIFT));
747 } else {
748 div_mask = PRCM_CLKOCR_CLKODIV1_MASK;
749 mask = (PRCM_CLKOCR_CLKODIV1_MASK | PRCM_CLKOCR_CLKOSEL1_MASK |
750 PRCM_CLKOCR_CLK1TYPE);
751 bits = ((source << PRCM_CLKOCR_CLKOSEL1_SHIFT) |
752 (div << PRCM_CLKOCR_CLKODIV1_SHIFT));
753 }
754 bits &= mask;
755
756 spin_lock_irqsave(&clkout_lock, flags);
757
758 val = readl(PRCM_CLKOCR);
759 if (val & div_mask) {
760 if (div) {
761 if ((val & mask) != bits) {
762 r = -EBUSY;
763 goto unlock_and_return;
764 }
765 } else {
766 if ((val & mask & ~div_mask) != bits) {
767 r = -EINVAL;
768 goto unlock_and_return;
769 }
770 }
771 }
772 writel((bits | (val & ~mask)), PRCM_CLKOCR);
773 requests[clkout] += (div ? 1 : -1);
774
775unlock_and_return:
776 spin_unlock_irqrestore(&clkout_lock, flags);
777
778 return r;
779}
780
781int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll)
782{
783 unsigned long flags;
784
785 BUG_ON((state < PRCMU_AP_SLEEP) || (PRCMU_AP_DEEP_IDLE < state));
786
787 spin_lock_irqsave(&mb0_transfer.lock, flags);
788
789 while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
790 cpu_relax();
791
792 writeb(MB0H_POWER_STATE_TRANS, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0));
793 writeb(state, (tcdm_base + PRCM_REQ_MB0_AP_POWER_STATE));
794 writeb((keep_ap_pll ? 1 : 0), (tcdm_base + PRCM_REQ_MB0_AP_PLL_STATE));
795 writeb((keep_ulp_clk ? 1 : 0),
796 (tcdm_base + PRCM_REQ_MB0_ULP_CLOCK_STATE));
797 writeb(0, (tcdm_base + PRCM_REQ_MB0_DO_NOT_WFI));
798 writel(MBOX_BIT(0), PRCM_MBOX_CPU_SET);
799
800 spin_unlock_irqrestore(&mb0_transfer.lock, flags);
801
802 return 0;
803}
804
805u8 db8500_prcmu_get_power_state_result(void)
806{
807 return readb(tcdm_base + PRCM_ACK_MB0_AP_PWRSTTR_STATUS);
808}
809
810/* This function should only be called while mb0_transfer.lock is held. */
811static void config_wakeups(void)
812{
813 const u8 header[2] = {
814 MB0H_CONFIG_WAKEUPS_EXE,
815 MB0H_CONFIG_WAKEUPS_SLEEP
816 };
817 static u32 last_dbb_events;
818 static u32 last_abb_events;
819 u32 dbb_events;
820 u32 abb_events;
821 unsigned int i;
822
823 dbb_events = mb0_transfer.req.dbb_irqs | mb0_transfer.req.dbb_wakeups;
824 dbb_events |= (WAKEUP_BIT_AC_WAKE_ACK | WAKEUP_BIT_AC_SLEEP_ACK);
825
826 abb_events = mb0_transfer.req.abb_events;
827
828 if ((dbb_events == last_dbb_events) && (abb_events == last_abb_events))
829 return;
830
831 for (i = 0; i < 2; i++) {
832 while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
833 cpu_relax();
834 writel(dbb_events, (tcdm_base + PRCM_REQ_MB0_WAKEUP_8500));
835 writel(abb_events, (tcdm_base + PRCM_REQ_MB0_WAKEUP_4500));
836 writeb(header[i], (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0));
837 writel(MBOX_BIT(0), PRCM_MBOX_CPU_SET);
838 }
839 last_dbb_events = dbb_events;
840 last_abb_events = abb_events;
841}
842
843void db8500_prcmu_enable_wakeups(u32 wakeups)
844{
845 unsigned long flags;
846 u32 bits;
847 int i;
848
849 BUG_ON(wakeups != (wakeups & VALID_WAKEUPS));
850
851 for (i = 0, bits = 0; i < NUM_PRCMU_WAKEUP_INDICES; i++) {
852 if (wakeups & BIT(i))
853 bits |= prcmu_wakeup_bit[i];
854 }
855
856 spin_lock_irqsave(&mb0_transfer.lock, flags);
857
858 mb0_transfer.req.dbb_wakeups = bits;
859 config_wakeups();
860
861 spin_unlock_irqrestore(&mb0_transfer.lock, flags);
862}
863
864void db8500_prcmu_config_abb_event_readout(u32 abb_events)
865{
866 unsigned long flags;
867
868 spin_lock_irqsave(&mb0_transfer.lock, flags);
869
870 mb0_transfer.req.abb_events = abb_events;
871 config_wakeups();
872
873 spin_unlock_irqrestore(&mb0_transfer.lock, flags);
874}
875
876void db8500_prcmu_get_abb_event_buffer(void __iomem **buf)
877{
878 if (readb(tcdm_base + PRCM_ACK_MB0_READ_POINTER) & 1)
879 *buf = (tcdm_base + PRCM_ACK_MB0_WAKEUP_1_4500);
880 else
881 *buf = (tcdm_base + PRCM_ACK_MB0_WAKEUP_0_4500);
882}
883
884/**
885 * db8500_prcmu_set_arm_opp - set the appropriate ARM OPP
886 * @opp: The new ARM operating point to which transition is to be made
887 * Returns: 0 on success, non-zero on failure
888 *
889 * This function sets the the operating point of the ARM.
890 */
891int db8500_prcmu_set_arm_opp(u8 opp)
892{
893 int r;
894
895 if (opp < ARM_NO_CHANGE || opp > ARM_EXTCLK)
896 return -EINVAL;
897
898 r = 0;
899
900 mutex_lock(&mb1_transfer.lock);
901
902 while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
903 cpu_relax();
904
905 writeb(MB1H_ARM_APE_OPP, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
906 writeb(opp, (tcdm_base + PRCM_REQ_MB1_ARM_OPP));
907 writeb(APE_NO_CHANGE, (tcdm_base + PRCM_REQ_MB1_APE_OPP));
908
909 writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
910 wait_for_completion(&mb1_transfer.work);
911
912 if ((mb1_transfer.ack.header != MB1H_ARM_APE_OPP) ||
913 (mb1_transfer.ack.arm_opp != opp))
914 r = -EIO;
915
916 mutex_unlock(&mb1_transfer.lock);
917
918 return r;
919}
920
921/**
922 * db8500_prcmu_get_arm_opp - get the current ARM OPP
923 *
924 * Returns: the current ARM OPP
925 */
926int db8500_prcmu_get_arm_opp(void)
927{
928 return readb(tcdm_base + PRCM_ACK_MB1_CURRENT_ARM_OPP);
929}
930
931/**
932 * db8500_prcmu_get_ddr_opp - get the current DDR OPP
933 *
934 * Returns: the current DDR OPP
935 */
936int db8500_prcmu_get_ddr_opp(void)
937{
938 return readb(PRCM_DDR_SUBSYS_APE_MINBW);
939}
940
941/* Divide the frequency of certain clocks by 2 for APE_50_PARTLY_25_OPP. */
942static void request_even_slower_clocks(bool enable)
943{
944 u32 clock_reg[] = {
945 PRCM_ACLK_MGT,
946 PRCM_DMACLK_MGT
947 };
948 unsigned long flags;
949 unsigned int i;
950
951 spin_lock_irqsave(&clk_mgt_lock, flags);
952
953 /* Grab the HW semaphore. */
954 while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
955 cpu_relax();
956
957 for (i = 0; i < ARRAY_SIZE(clock_reg); i++) {
958 u32 val;
959 u32 div;
960
961 val = readl(prcmu_base + clock_reg[i]);
962 div = (val & PRCM_CLK_MGT_CLKPLLDIV_MASK);
963 if (enable) {
964 if ((div <= 1) || (div > 15)) {
965 pr_err("prcmu: Bad clock divider %d in %s\n",
966 div, __func__);
967 goto unlock_and_return;
968 }
969 div <<= 1;
970 } else {
971 if (div <= 2)
972 goto unlock_and_return;
973 div >>= 1;
974 }
975 val = ((val & ~PRCM_CLK_MGT_CLKPLLDIV_MASK) |
976 (div & PRCM_CLK_MGT_CLKPLLDIV_MASK));
977 writel(val, prcmu_base + clock_reg[i]);
978 }
979
980unlock_and_return:
981 /* Release the HW semaphore. */
982 writel(0, PRCM_SEM);
983
984 spin_unlock_irqrestore(&clk_mgt_lock, flags);
985}
986
987/**
988 * db8500_set_ape_opp - set the appropriate APE OPP
989 * @opp: The new APE operating point to which transition is to be made
990 * Returns: 0 on success, non-zero on failure
991 *
992 * This function sets the operating point of the APE.
993 */
994int db8500_prcmu_set_ape_opp(u8 opp)
995{
996 int r = 0;
997
998 if (opp == mb1_transfer.ape_opp)
999 return 0;
1000
1001 mutex_lock(&mb1_transfer.lock);
1002
1003 if (mb1_transfer.ape_opp == APE_50_PARTLY_25_OPP)
1004 request_even_slower_clocks(false);
1005
1006 if ((opp != APE_100_OPP) && (mb1_transfer.ape_opp != APE_100_OPP))
1007 goto skip_message;
1008
1009 while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
1010 cpu_relax();
1011
1012 writeb(MB1H_ARM_APE_OPP, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
1013 writeb(ARM_NO_CHANGE, (tcdm_base + PRCM_REQ_MB1_ARM_OPP));
1014 writeb(((opp == APE_50_PARTLY_25_OPP) ? APE_50_OPP : opp),
1015 (tcdm_base + PRCM_REQ_MB1_APE_OPP));
1016
1017 writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
1018 wait_for_completion(&mb1_transfer.work);
1019
1020 if ((mb1_transfer.ack.header != MB1H_ARM_APE_OPP) ||
1021 (mb1_transfer.ack.ape_opp != opp))
1022 r = -EIO;
1023
1024skip_message:
1025 if ((!r && (opp == APE_50_PARTLY_25_OPP)) ||
1026 (r && (mb1_transfer.ape_opp == APE_50_PARTLY_25_OPP)))
1027 request_even_slower_clocks(true);
1028 if (!r)
1029 mb1_transfer.ape_opp = opp;
1030
1031 mutex_unlock(&mb1_transfer.lock);
1032
1033 return r;
1034}
1035
1036/**
1037 * db8500_prcmu_get_ape_opp - get the current APE OPP
1038 *
1039 * Returns: the current APE OPP
1040 */
1041int db8500_prcmu_get_ape_opp(void)
1042{
1043 return readb(tcdm_base + PRCM_ACK_MB1_CURRENT_APE_OPP);
1044}
1045
1046/**
1047 * db8500_prcmu_request_ape_opp_100_voltage - Request APE OPP 100% voltage
1048 * @enable: true to request the higher voltage, false to drop a request.
1049 *
1050 * Calls to this function to enable and disable requests must be balanced.
1051 */
1052int db8500_prcmu_request_ape_opp_100_voltage(bool enable)
1053{
1054 int r = 0;
1055 u8 header;
1056 static unsigned int requests;
1057
1058 mutex_lock(&mb1_transfer.lock);
1059
1060 if (enable) {
1061 if (0 != requests++)
1062 goto unlock_and_return;
1063 header = MB1H_REQUEST_APE_OPP_100_VOLT;
1064 } else {
1065 if (requests == 0) {
1066 r = -EIO;
1067 goto unlock_and_return;
1068 } else if (1 != requests--) {
1069 goto unlock_and_return;
1070 }
1071 header = MB1H_RELEASE_APE_OPP_100_VOLT;
1072 }
1073
1074 while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
1075 cpu_relax();
1076
1077 writeb(header, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
1078
1079 writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
1080 wait_for_completion(&mb1_transfer.work);
1081
1082 if ((mb1_transfer.ack.header != header) ||
1083 ((mb1_transfer.ack.ape_voltage_status & BIT(0)) != 0))
1084 r = -EIO;
1085
1086unlock_and_return:
1087 mutex_unlock(&mb1_transfer.lock);
1088
1089 return r;
1090}
1091
1092/**
1093 * prcmu_release_usb_wakeup_state - release the state required by a USB wakeup
1094 *
1095 * This function releases the power state requirements of a USB wakeup.
1096 */
1097int prcmu_release_usb_wakeup_state(void)
1098{
1099 int r = 0;
1100
1101 mutex_lock(&mb1_transfer.lock);
1102
1103 while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
1104 cpu_relax();
1105
1106 writeb(MB1H_RELEASE_USB_WAKEUP,
1107 (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
1108
1109 writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
1110 wait_for_completion(&mb1_transfer.work);
1111
1112 if ((mb1_transfer.ack.header != MB1H_RELEASE_USB_WAKEUP) ||
1113 ((mb1_transfer.ack.ape_voltage_status & BIT(0)) != 0))
1114 r = -EIO;
1115
1116 mutex_unlock(&mb1_transfer.lock);
1117
1118 return r;
1119}
1120
1121static int request_pll(u8 clock, bool enable)
1122{
1123 int r = 0;
1124
1125 if (clock == PRCMU_PLLSOC0)
1126 clock = (enable ? PLL_SOC0_ON : PLL_SOC0_OFF);
1127 else if (clock == PRCMU_PLLSOC1)
1128 clock = (enable ? PLL_SOC1_ON : PLL_SOC1_OFF);
1129 else
1130 return -EINVAL;
1131
1132 mutex_lock(&mb1_transfer.lock);
1133
1134 while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
1135 cpu_relax();
1136
1137 writeb(MB1H_PLL_ON_OFF, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
1138 writeb(clock, (tcdm_base + PRCM_REQ_MB1_PLL_ON_OFF));
1139
1140 writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
1141 wait_for_completion(&mb1_transfer.work);
1142
1143 if (mb1_transfer.ack.header != MB1H_PLL_ON_OFF)
1144 r = -EIO;
1145
1146 mutex_unlock(&mb1_transfer.lock);
1147
1148 return r;
1149}
1150
1151/**
1152 * db8500_prcmu_set_epod - set the state of a EPOD (power domain)
1153 * @epod_id: The EPOD to set
1154 * @epod_state: The new EPOD state
1155 *
1156 * This function sets the state of a EPOD (power domain). It may not be called
1157 * from interrupt context.
1158 */
1159int db8500_prcmu_set_epod(u16 epod_id, u8 epod_state)
1160{
1161 int r = 0;
1162 bool ram_retention = false;
1163 int i;
1164
1165 /* check argument */
1166 BUG_ON(epod_id >= NUM_EPOD_ID);
1167
1168 /* set flag if retention is possible */
1169 switch (epod_id) {
1170 case EPOD_ID_SVAMMDSP:
1171 case EPOD_ID_SIAMMDSP:
1172 case EPOD_ID_ESRAM12:
1173 case EPOD_ID_ESRAM34:
1174 ram_retention = true;
1175 break;
1176 }
1177
1178 /* check argument */
1179 BUG_ON(epod_state > EPOD_STATE_ON);
1180 BUG_ON(epod_state == EPOD_STATE_RAMRET && !ram_retention);
1181
1182 /* get lock */
1183 mutex_lock(&mb2_transfer.lock);
1184
1185 /* wait for mailbox */
1186 while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(2))
1187 cpu_relax();
1188
1189 /* fill in mailbox */
1190 for (i = 0; i < NUM_EPOD_ID; i++)
1191 writeb(EPOD_STATE_NO_CHANGE, (tcdm_base + PRCM_REQ_MB2 + i));
1192 writeb(epod_state, (tcdm_base + PRCM_REQ_MB2 + epod_id));
1193
1194 writeb(MB2H_DPS, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB2));
1195
1196 writel(MBOX_BIT(2), PRCM_MBOX_CPU_SET);
1197
1198 /*
1199 * The current firmware version does not handle errors correctly,
1200 * and we cannot recover if there is an error.
1201 * This is expected to change when the firmware is updated.
1202 */
1203 if (!wait_for_completion_timeout(&mb2_transfer.work,
1204 msecs_to_jiffies(20000))) {
1205 pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",
1206 __func__);
1207 r = -EIO;
1208 goto unlock_and_return;
1209 }
1210
1211 if (mb2_transfer.ack.status != HWACC_PWR_ST_OK)
1212 r = -EIO;
1213
1214unlock_and_return:
1215 mutex_unlock(&mb2_transfer.lock);
1216 return r;
1217}
1218
1219/**
1220 * prcmu_configure_auto_pm - Configure autonomous power management.
1221 * @sleep: Configuration for ApSleep.
1222 * @idle: Configuration for ApIdle.
1223 */
1224void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep,
1225 struct prcmu_auto_pm_config *idle)
1226{
1227 u32 sleep_cfg;
1228 u32 idle_cfg;
1229 unsigned long flags;
1230
1231 BUG_ON((sleep == NULL) || (idle == NULL));
1232
1233 sleep_cfg = (sleep->sva_auto_pm_enable & 0xF);
1234 sleep_cfg = ((sleep_cfg << 4) | (sleep->sia_auto_pm_enable & 0xF));
1235 sleep_cfg = ((sleep_cfg << 8) | (sleep->sva_power_on & 0xFF));
1236 sleep_cfg = ((sleep_cfg << 8) | (sleep->sia_power_on & 0xFF));
1237 sleep_cfg = ((sleep_cfg << 4) | (sleep->sva_policy & 0xF));
1238 sleep_cfg = ((sleep_cfg << 4) | (sleep->sia_policy & 0xF));
1239
1240 idle_cfg = (idle->sva_auto_pm_enable & 0xF);
1241 idle_cfg = ((idle_cfg << 4) | (idle->sia_auto_pm_enable & 0xF));
1242 idle_cfg = ((idle_cfg << 8) | (idle->sva_power_on & 0xFF));
1243 idle_cfg = ((idle_cfg << 8) | (idle->sia_power_on & 0xFF));
1244 idle_cfg = ((idle_cfg << 4) | (idle->sva_policy & 0xF));
1245 idle_cfg = ((idle_cfg << 4) | (idle->sia_policy & 0xF));
1246
1247 spin_lock_irqsave(&mb2_transfer.auto_pm_lock, flags);
1248
1249 /*
1250 * The autonomous power management configuration is done through
1251 * fields in mailbox 2, but these fields are only used as shared
1252 * variables - i.e. there is no need to send a message.
1253 */
1254 writel(sleep_cfg, (tcdm_base + PRCM_REQ_MB2_AUTO_PM_SLEEP));
1255 writel(idle_cfg, (tcdm_base + PRCM_REQ_MB2_AUTO_PM_IDLE));
1256
1257 mb2_transfer.auto_pm_enabled =
1258 ((sleep->sva_auto_pm_enable == PRCMU_AUTO_PM_ON) ||
1259 (sleep->sia_auto_pm_enable == PRCMU_AUTO_PM_ON) ||
1260 (idle->sva_auto_pm_enable == PRCMU_AUTO_PM_ON) ||
1261 (idle->sia_auto_pm_enable == PRCMU_AUTO_PM_ON));
1262
1263 spin_unlock_irqrestore(&mb2_transfer.auto_pm_lock, flags);
1264}
1265EXPORT_SYMBOL(prcmu_configure_auto_pm);
1266
1267bool prcmu_is_auto_pm_enabled(void)
1268{
1269 return mb2_transfer.auto_pm_enabled;
1270}
1271
1272static int request_sysclk(bool enable)
1273{
1274 int r;
1275 unsigned long flags;
1276
1277 r = 0;
1278
1279 mutex_lock(&mb3_transfer.sysclk_lock);
1280
1281 spin_lock_irqsave(&mb3_transfer.lock, flags);
1282
1283 while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(3))
1284 cpu_relax();
1285
1286 writeb((enable ? ON : OFF), (tcdm_base + PRCM_REQ_MB3_SYSCLK_MGT));
1287
1288 writeb(MB3H_SYSCLK, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB3));
1289 writel(MBOX_BIT(3), PRCM_MBOX_CPU_SET);
1290
1291 spin_unlock_irqrestore(&mb3_transfer.lock, flags);
1292
1293 /*
1294 * The firmware only sends an ACK if we want to enable the
1295 * SysClk, and it succeeds.
1296 */
1297 if (enable && !wait_for_completion_timeout(&mb3_transfer.sysclk_work,
1298 msecs_to_jiffies(20000))) {
1299 pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",
1300 __func__);
1301 r = -EIO;
1302 }
1303
1304 mutex_unlock(&mb3_transfer.sysclk_lock);
1305
1306 return r;
1307}
1308
1309static int request_timclk(bool enable)
1310{
1311 u32 val = (PRCM_TCR_DOZE_MODE | PRCM_TCR_TENSEL_MASK);
1312
1313 if (!enable)
1314 val |= PRCM_TCR_STOP_TIMERS;
1315 writel(val, PRCM_TCR);
1316
1317 return 0;
1318}
1319
1320static int request_clock(u8 clock, bool enable)
1321{
1322 u32 val;
1323 unsigned long flags;
1324
1325 spin_lock_irqsave(&clk_mgt_lock, flags);
1326
1327 /* Grab the HW semaphore. */
1328 while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
1329 cpu_relax();
1330
1331 val = readl(prcmu_base + clk_mgt[clock].offset);
1332 if (enable) {
1333 val |= (PRCM_CLK_MGT_CLKEN | clk_mgt[clock].pllsw);
1334 } else {
1335 clk_mgt[clock].pllsw = (val & PRCM_CLK_MGT_CLKPLLSW_MASK);
1336 val &= ~(PRCM_CLK_MGT_CLKEN | PRCM_CLK_MGT_CLKPLLSW_MASK);
1337 }
1338 writel(val, prcmu_base + clk_mgt[clock].offset);
1339
1340 /* Release the HW semaphore. */
1341 writel(0, PRCM_SEM);
1342
1343 spin_unlock_irqrestore(&clk_mgt_lock, flags);
1344
1345 return 0;
1346}
1347
1348static int request_sga_clock(u8 clock, bool enable)
1349{
1350 u32 val;
1351 int ret;
1352
1353 if (enable) {
1354 val = readl(PRCM_CGATING_BYPASS);
1355 writel(val | PRCM_CGATING_BYPASS_ICN2, PRCM_CGATING_BYPASS);
1356 }
1357
1358 ret = request_clock(clock, enable);
1359
1360 if (!ret && !enable) {
1361 val = readl(PRCM_CGATING_BYPASS);
1362 writel(val & ~PRCM_CGATING_BYPASS_ICN2, PRCM_CGATING_BYPASS);
1363 }
1364
1365 return ret;
1366}
1367
1368static inline bool plldsi_locked(void)
1369{
1370 return (readl(PRCM_PLLDSI_LOCKP) &
1371 (PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP10 |
1372 PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP3)) ==
1373 (PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP10 |
1374 PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP3);
1375}
1376
1377static int request_plldsi(bool enable)
1378{
1379 int r = 0;
1380 u32 val;
1381
1382 writel((PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMP |
1383 PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMPI), (enable ?
1384 PRCM_MMIP_LS_CLAMP_CLR : PRCM_MMIP_LS_CLAMP_SET));
1385
1386 val = readl(PRCM_PLLDSI_ENABLE);
1387 if (enable)
1388 val |= PRCM_PLLDSI_ENABLE_PRCM_PLLDSI_ENABLE;
1389 else
1390 val &= ~PRCM_PLLDSI_ENABLE_PRCM_PLLDSI_ENABLE;
1391 writel(val, PRCM_PLLDSI_ENABLE);
1392
1393 if (enable) {
1394 unsigned int i;
1395 bool locked = plldsi_locked();
1396
1397 for (i = 10; !locked && (i > 0); --i) {
1398 udelay(100);
1399 locked = plldsi_locked();
1400 }
1401 if (locked) {
1402 writel(PRCM_APE_RESETN_DSIPLL_RESETN,
1403 PRCM_APE_RESETN_SET);
1404 } else {
1405 writel((PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMP |
1406 PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMPI),
1407 PRCM_MMIP_LS_CLAMP_SET);
1408 val &= ~PRCM_PLLDSI_ENABLE_PRCM_PLLDSI_ENABLE;
1409 writel(val, PRCM_PLLDSI_ENABLE);
1410 r = -EAGAIN;
1411 }
1412 } else {
1413 writel(PRCM_APE_RESETN_DSIPLL_RESETN, PRCM_APE_RESETN_CLR);
1414 }
1415 return r;
1416}
1417
1418static int request_dsiclk(u8 n, bool enable)
1419{
1420 u32 val;
1421
1422 val = readl(PRCM_DSI_PLLOUT_SEL);
1423 val &= ~dsiclk[n].divsel_mask;
1424 val |= ((enable ? dsiclk[n].divsel : PRCM_DSI_PLLOUT_SEL_OFF) <<
1425 dsiclk[n].divsel_shift);
1426 writel(val, PRCM_DSI_PLLOUT_SEL);
1427 return 0;
1428}
1429
1430static int request_dsiescclk(u8 n, bool enable)
1431{
1432 u32 val;
1433
1434 val = readl(PRCM_DSITVCLK_DIV);
1435 enable ? (val |= dsiescclk[n].en) : (val &= ~dsiescclk[n].en);
1436 writel(val, PRCM_DSITVCLK_DIV);
1437 return 0;
1438}
1439
1440/**
1441 * db8500_prcmu_request_clock() - Request for a clock to be enabled or disabled.
1442 * @clock: The clock for which the request is made.
1443 * @enable: Whether the clock should be enabled (true) or disabled (false).
1444 *
1445 * This function should only be used by the clock implementation.
1446 * Do not use it from any other place!
1447 */
1448int db8500_prcmu_request_clock(u8 clock, bool enable)
1449{
1450 if (clock == PRCMU_SGACLK)
1451 return request_sga_clock(clock, enable);
1452 else if (clock < PRCMU_NUM_REG_CLOCKS)
1453 return request_clock(clock, enable);
1454 else if (clock == PRCMU_TIMCLK)
1455 return request_timclk(enable);
1456 else if ((clock == PRCMU_DSI0CLK) || (clock == PRCMU_DSI1CLK))
1457 return request_dsiclk((clock - PRCMU_DSI0CLK), enable);
1458 else if ((PRCMU_DSI0ESCCLK <= clock) && (clock <= PRCMU_DSI2ESCCLK))
1459 return request_dsiescclk((clock - PRCMU_DSI0ESCCLK), enable);
1460 else if (clock == PRCMU_PLLDSI)
1461 return request_plldsi(enable);
1462 else if (clock == PRCMU_SYSCLK)
1463 return request_sysclk(enable);
1464 else if ((clock == PRCMU_PLLSOC0) || (clock == PRCMU_PLLSOC1))
1465 return request_pll(clock, enable);
1466 else
1467 return -EINVAL;
1468}
1469
1470static unsigned long pll_rate(void __iomem *reg, unsigned long src_rate,
1471 int branch)
1472{
1473 u64 rate;
1474 u32 val;
1475 u32 d;
1476 u32 div = 1;
1477
1478 val = readl(reg);
1479
1480 rate = src_rate;
1481 rate *= ((val & PRCM_PLL_FREQ_D_MASK) >> PRCM_PLL_FREQ_D_SHIFT);
1482
1483 d = ((val & PRCM_PLL_FREQ_N_MASK) >> PRCM_PLL_FREQ_N_SHIFT);
1484 if (d > 1)
1485 div *= d;
1486
1487 d = ((val & PRCM_PLL_FREQ_R_MASK) >> PRCM_PLL_FREQ_R_SHIFT);
1488 if (d > 1)
1489 div *= d;
1490
1491 if (val & PRCM_PLL_FREQ_SELDIV2)
1492 div *= 2;
1493
1494 if ((branch == PLL_FIX) || ((branch == PLL_DIV) &&
1495 (val & PRCM_PLL_FREQ_DIV2EN) &&
1496 ((reg == PRCM_PLLSOC0_FREQ) ||
1497 (reg == PRCM_PLLARM_FREQ) ||
1498 (reg == PRCM_PLLDDR_FREQ))))
1499 div *= 2;
1500
1501 (void)do_div(rate, div);
1502
1503 return (unsigned long)rate;
1504}
1505
1506#define ROOT_CLOCK_RATE 38400000
1507
1508static unsigned long clock_rate(u8 clock)
1509{
1510 u32 val;
1511 u32 pllsw;
1512 unsigned long rate = ROOT_CLOCK_RATE;
1513
1514 val = readl(prcmu_base + clk_mgt[clock].offset);
1515
1516 if (val & PRCM_CLK_MGT_CLK38) {
1517 if (clk_mgt[clock].clk38div && (val & PRCM_CLK_MGT_CLK38DIV))
1518 rate /= 2;
1519 return rate;
1520 }
1521
1522 val |= clk_mgt[clock].pllsw;
1523 pllsw = (val & PRCM_CLK_MGT_CLKPLLSW_MASK);
1524
1525 if (pllsw == PRCM_CLK_MGT_CLKPLLSW_SOC0)
1526 rate = pll_rate(PRCM_PLLSOC0_FREQ, rate, clk_mgt[clock].branch);
1527 else if (pllsw == PRCM_CLK_MGT_CLKPLLSW_SOC1)
1528 rate = pll_rate(PRCM_PLLSOC1_FREQ, rate, clk_mgt[clock].branch);
1529 else if (pllsw == PRCM_CLK_MGT_CLKPLLSW_DDR)
1530 rate = pll_rate(PRCM_PLLDDR_FREQ, rate, clk_mgt[clock].branch);
1531 else
1532 return 0;
1533
1534 if ((clock == PRCMU_SGACLK) &&
1535 (val & PRCM_SGACLK_MGT_SGACLKDIV_BY_2_5_EN)) {
1536 u64 r = (rate * 10);
1537
1538 (void)do_div(r, 25);
1539 return (unsigned long)r;
1540 }
1541 val &= PRCM_CLK_MGT_CLKPLLDIV_MASK;
1542 if (val)
1543 return rate / val;
1544 else
1545 return 0;
1546}
1547
1548static unsigned long armss_rate(void)
1549{
1550 u32 r;
1551 unsigned long rate;
1552
1553 r = readl(PRCM_ARM_CHGCLKREQ);
1554
1555 if (r & PRCM_ARM_CHGCLKREQ_PRCM_ARM_CHGCLKREQ) {
1556 /* External ARMCLKFIX clock */
1557
1558 rate = pll_rate(PRCM_PLLDDR_FREQ, ROOT_CLOCK_RATE, PLL_FIX);
1559
1560 /* Check PRCM_ARM_CHGCLKREQ divider */
1561 if (!(r & PRCM_ARM_CHGCLKREQ_PRCM_ARM_DIVSEL))
1562 rate /= 2;
1563
1564 /* Check PRCM_ARMCLKFIX_MGT divider */
1565 r = readl(PRCM_ARMCLKFIX_MGT);
1566 r &= PRCM_CLK_MGT_CLKPLLDIV_MASK;
1567 rate /= r;
1568
1569 } else {/* ARM PLL */
1570 rate = pll_rate(PRCM_PLLARM_FREQ, ROOT_CLOCK_RATE, PLL_DIV);
1571 }
1572
1573 return rate;
1574}
1575
1576static unsigned long dsiclk_rate(u8 n)
1577{
1578 u32 divsel;
1579 u32 div = 1;
1580
1581 divsel = readl(PRCM_DSI_PLLOUT_SEL);
1582 divsel = ((divsel & dsiclk[n].divsel_mask) >> dsiclk[n].divsel_shift);
1583
1584 if (divsel == PRCM_DSI_PLLOUT_SEL_OFF)
1585 divsel = dsiclk[n].divsel;
1586 else
1587 dsiclk[n].divsel = divsel;
1588
1589 switch (divsel) {
1590 case PRCM_DSI_PLLOUT_SEL_PHI_4:
1591 div *= 2;
1592 /* Fall through */
1593 case PRCM_DSI_PLLOUT_SEL_PHI_2:
1594 div *= 2;
1595 /* Fall through */
1596 case PRCM_DSI_PLLOUT_SEL_PHI:
1597 return pll_rate(PRCM_PLLDSI_FREQ, clock_rate(PRCMU_HDMICLK),
1598 PLL_RAW) / div;
1599 default:
1600 return 0;
1601 }
1602}
1603
1604static unsigned long dsiescclk_rate(u8 n)
1605{
1606 u32 div;
1607
1608 div = readl(PRCM_DSITVCLK_DIV);
1609 div = ((div & dsiescclk[n].div_mask) >> (dsiescclk[n].div_shift));
1610 return clock_rate(PRCMU_TVCLK) / max((u32)1, div);
1611}
1612
1613unsigned long prcmu_clock_rate(u8 clock)
1614{
1615 if (clock < PRCMU_NUM_REG_CLOCKS)
1616 return clock_rate(clock);
1617 else if (clock == PRCMU_TIMCLK)
1618 return ROOT_CLOCK_RATE / 16;
1619 else if (clock == PRCMU_SYSCLK)
1620 return ROOT_CLOCK_RATE;
1621 else if (clock == PRCMU_PLLSOC0)
1622 return pll_rate(PRCM_PLLSOC0_FREQ, ROOT_CLOCK_RATE, PLL_RAW);
1623 else if (clock == PRCMU_PLLSOC1)
1624 return pll_rate(PRCM_PLLSOC1_FREQ, ROOT_CLOCK_RATE, PLL_RAW);
1625 else if (clock == PRCMU_ARMSS)
1626 return armss_rate();
1627 else if (clock == PRCMU_PLLDDR)
1628 return pll_rate(PRCM_PLLDDR_FREQ, ROOT_CLOCK_RATE, PLL_RAW);
1629 else if (clock == PRCMU_PLLDSI)
1630 return pll_rate(PRCM_PLLDSI_FREQ, clock_rate(PRCMU_HDMICLK),
1631 PLL_RAW);
1632 else if ((clock == PRCMU_DSI0CLK) || (clock == PRCMU_DSI1CLK))
1633 return dsiclk_rate(clock - PRCMU_DSI0CLK);
1634 else if ((PRCMU_DSI0ESCCLK <= clock) && (clock <= PRCMU_DSI2ESCCLK))
1635 return dsiescclk_rate(clock - PRCMU_DSI0ESCCLK);
1636 else
1637 return 0;
1638}
1639
1640static unsigned long clock_source_rate(u32 clk_mgt_val, int branch)
1641{
1642 if (clk_mgt_val & PRCM_CLK_MGT_CLK38)
1643 return ROOT_CLOCK_RATE;
1644 clk_mgt_val &= PRCM_CLK_MGT_CLKPLLSW_MASK;
1645 if (clk_mgt_val == PRCM_CLK_MGT_CLKPLLSW_SOC0)
1646 return pll_rate(PRCM_PLLSOC0_FREQ, ROOT_CLOCK_RATE, branch);
1647 else if (clk_mgt_val == PRCM_CLK_MGT_CLKPLLSW_SOC1)
1648 return pll_rate(PRCM_PLLSOC1_FREQ, ROOT_CLOCK_RATE, branch);
1649 else if (clk_mgt_val == PRCM_CLK_MGT_CLKPLLSW_DDR)
1650 return pll_rate(PRCM_PLLDDR_FREQ, ROOT_CLOCK_RATE, branch);
1651 else
1652 return 0;
1653}
1654
1655static u32 clock_divider(unsigned long src_rate, unsigned long rate)
1656{
1657 u32 div;
1658
1659 div = (src_rate / rate);
1660 if (div == 0)
1661 return 1;
1662 if (rate < (src_rate / div))
1663 div++;
1664 return div;
1665}
1666
1667static long round_clock_rate(u8 clock, unsigned long rate)
1668{
1669 u32 val;
1670 u32 div;
1671 unsigned long src_rate;
1672 long rounded_rate;
1673
1674 val = readl(prcmu_base + clk_mgt[clock].offset);
1675 src_rate = clock_source_rate((val | clk_mgt[clock].pllsw),
1676 clk_mgt[clock].branch);
1677 div = clock_divider(src_rate, rate);
1678 if (val & PRCM_CLK_MGT_CLK38) {
1679 if (clk_mgt[clock].clk38div) {
1680 if (div > 2)
1681 div = 2;
1682 } else {
1683 div = 1;
1684 }
1685 } else if ((clock == PRCMU_SGACLK) && (div == 3)) {
1686 u64 r = (src_rate * 10);
1687
1688 (void)do_div(r, 25);
1689 if (r <= rate)
1690 return (unsigned long)r;
1691 }
1692 rounded_rate = (src_rate / min(div, (u32)31));
1693
1694 return rounded_rate;
1695}
1696
1697static const unsigned long db8500_armss_freqs[] = {
1698 200000000,
1699 400000000,
1700 800000000,
1701 998400000
1702};
1703
1704/* The DB8520 has slightly higher ARMSS max frequency */
1705static const unsigned long db8520_armss_freqs[] = {
1706 200000000,
1707 400000000,
1708 800000000,
1709 1152000000
1710};
1711
1712
1713
1714static long round_armss_rate(unsigned long rate)
1715{
1716 unsigned long freq = 0;
1717 const unsigned long *freqs;
1718 int nfreqs;
1719 int i;
1720
1721 if (fw_info.version.project == PRCMU_FW_PROJECT_U8520) {
1722 freqs = db8520_armss_freqs;
1723 nfreqs = ARRAY_SIZE(db8520_armss_freqs);
1724 } else {
1725 freqs = db8500_armss_freqs;
1726 nfreqs = ARRAY_SIZE(db8500_armss_freqs);
1727 }
1728
1729 /* Find the corresponding arm opp from the cpufreq table. */
1730 for (i = 0; i < nfreqs; i++) {
1731 freq = freqs[i];
1732 if (rate <= freq)
1733 break;
1734 }
1735
1736 /* Return the last valid value, even if a match was not found. */
1737 return freq;
1738}
1739
1740#define MIN_PLL_VCO_RATE 600000000ULL
1741#define MAX_PLL_VCO_RATE 1680640000ULL
1742
1743static long round_plldsi_rate(unsigned long rate)
1744{
1745 long rounded_rate = 0;
1746 unsigned long src_rate;
1747 unsigned long rem;
1748 u32 r;
1749
1750 src_rate = clock_rate(PRCMU_HDMICLK);
1751 rem = rate;
1752
1753 for (r = 7; (rem > 0) && (r > 0); r--) {
1754 u64 d;
1755
1756 d = (r * rate);
1757 (void)do_div(d, src_rate);
1758 if (d < 6)
1759 d = 6;
1760 else if (d > 255)
1761 d = 255;
1762 d *= src_rate;
1763 if (((2 * d) < (r * MIN_PLL_VCO_RATE)) ||
1764 ((r * MAX_PLL_VCO_RATE) < (2 * d)))
1765 continue;
1766 (void)do_div(d, r);
1767 if (rate < d) {
1768 if (rounded_rate == 0)
1769 rounded_rate = (long)d;
1770 break;
1771 }
1772 if ((rate - d) < rem) {
1773 rem = (rate - d);
1774 rounded_rate = (long)d;
1775 }
1776 }
1777 return rounded_rate;
1778}
1779
1780static long round_dsiclk_rate(unsigned long rate)
1781{
1782 u32 div;
1783 unsigned long src_rate;
1784 long rounded_rate;
1785
1786 src_rate = pll_rate(PRCM_PLLDSI_FREQ, clock_rate(PRCMU_HDMICLK),
1787 PLL_RAW);
1788 div = clock_divider(src_rate, rate);
1789 rounded_rate = (src_rate / ((div > 2) ? 4 : div));
1790
1791 return rounded_rate;
1792}
1793
1794static long round_dsiescclk_rate(unsigned long rate)
1795{
1796 u32 div;
1797 unsigned long src_rate;
1798 long rounded_rate;
1799
1800 src_rate = clock_rate(PRCMU_TVCLK);
1801 div = clock_divider(src_rate, rate);
1802 rounded_rate = (src_rate / min(div, (u32)255));
1803
1804 return rounded_rate;
1805}
1806
1807long prcmu_round_clock_rate(u8 clock, unsigned long rate)
1808{
1809 if (clock < PRCMU_NUM_REG_CLOCKS)
1810 return round_clock_rate(clock, rate);
1811 else if (clock == PRCMU_ARMSS)
1812 return round_armss_rate(rate);
1813 else if (clock == PRCMU_PLLDSI)
1814 return round_plldsi_rate(rate);
1815 else if ((clock == PRCMU_DSI0CLK) || (clock == PRCMU_DSI1CLK))
1816 return round_dsiclk_rate(rate);
1817 else if ((PRCMU_DSI0ESCCLK <= clock) && (clock <= PRCMU_DSI2ESCCLK))
1818 return round_dsiescclk_rate(rate);
1819 else
1820 return (long)prcmu_clock_rate(clock);
1821}
1822
1823static void set_clock_rate(u8 clock, unsigned long rate)
1824{
1825 u32 val;
1826 u32 div;
1827 unsigned long src_rate;
1828 unsigned long flags;
1829
1830 spin_lock_irqsave(&clk_mgt_lock, flags);
1831
1832 /* Grab the HW semaphore. */
1833 while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
1834 cpu_relax();
1835
1836 val = readl(prcmu_base + clk_mgt[clock].offset);
1837 src_rate = clock_source_rate((val | clk_mgt[clock].pllsw),
1838 clk_mgt[clock].branch);
1839 div = clock_divider(src_rate, rate);
1840 if (val & PRCM_CLK_MGT_CLK38) {
1841 if (clk_mgt[clock].clk38div) {
1842 if (div > 1)
1843 val |= PRCM_CLK_MGT_CLK38DIV;
1844 else
1845 val &= ~PRCM_CLK_MGT_CLK38DIV;
1846 }
1847 } else if (clock == PRCMU_SGACLK) {
1848 val &= ~(PRCM_CLK_MGT_CLKPLLDIV_MASK |
1849 PRCM_SGACLK_MGT_SGACLKDIV_BY_2_5_EN);
1850 if (div == 3) {
1851 u64 r = (src_rate * 10);
1852
1853 (void)do_div(r, 25);
1854 if (r <= rate) {
1855 val |= PRCM_SGACLK_MGT_SGACLKDIV_BY_2_5_EN;
1856 div = 0;
1857 }
1858 }
1859 val |= min(div, (u32)31);
1860 } else {
1861 val &= ~PRCM_CLK_MGT_CLKPLLDIV_MASK;
1862 val |= min(div, (u32)31);
1863 }
1864 writel(val, prcmu_base + clk_mgt[clock].offset);
1865
1866 /* Release the HW semaphore. */
1867 writel(0, PRCM_SEM);
1868
1869 spin_unlock_irqrestore(&clk_mgt_lock, flags);
1870}
1871
1872static int set_armss_rate(unsigned long rate)
1873{
1874 unsigned long freq;
1875 u8 opps[] = { ARM_EXTCLK, ARM_50_OPP, ARM_100_OPP, ARM_MAX_OPP };
1876 const unsigned long *freqs;
1877 int nfreqs;
1878 int i;
1879
1880 if (fw_info.version.project == PRCMU_FW_PROJECT_U8520) {
1881 freqs = db8520_armss_freqs;
1882 nfreqs = ARRAY_SIZE(db8520_armss_freqs);
1883 } else {
1884 freqs = db8500_armss_freqs;
1885 nfreqs = ARRAY_SIZE(db8500_armss_freqs);
1886 }
1887
1888 /* Find the corresponding arm opp from the cpufreq table. */
1889 for (i = 0; i < nfreqs; i++) {
1890 freq = freqs[i];
1891 if (rate == freq)
1892 break;
1893 }
1894
1895 if (rate != freq)
1896 return -EINVAL;
1897
1898 /* Set the new arm opp. */
1899 pr_debug("SET ARM OPP 0x%02x\n", opps[i]);
1900 return db8500_prcmu_set_arm_opp(opps[i]);
1901}
1902
1903static int set_plldsi_rate(unsigned long rate)
1904{
1905 unsigned long src_rate;
1906 unsigned long rem;
1907 u32 pll_freq = 0;
1908 u32 r;
1909
1910 src_rate = clock_rate(PRCMU_HDMICLK);
1911 rem = rate;
1912
1913 for (r = 7; (rem > 0) && (r > 0); r--) {
1914 u64 d;
1915 u64 hwrate;
1916
1917 d = (r * rate);
1918 (void)do_div(d, src_rate);
1919 if (d < 6)
1920 d = 6;
1921 else if (d > 255)
1922 d = 255;
1923 hwrate = (d * src_rate);
1924 if (((2 * hwrate) < (r * MIN_PLL_VCO_RATE)) ||
1925 ((r * MAX_PLL_VCO_RATE) < (2 * hwrate)))
1926 continue;
1927 (void)do_div(hwrate, r);
1928 if (rate < hwrate) {
1929 if (pll_freq == 0)
1930 pll_freq = (((u32)d << PRCM_PLL_FREQ_D_SHIFT) |
1931 (r << PRCM_PLL_FREQ_R_SHIFT));
1932 break;
1933 }
1934 if ((rate - hwrate) < rem) {
1935 rem = (rate - hwrate);
1936 pll_freq = (((u32)d << PRCM_PLL_FREQ_D_SHIFT) |
1937 (r << PRCM_PLL_FREQ_R_SHIFT));
1938 }
1939 }
1940 if (pll_freq == 0)
1941 return -EINVAL;
1942
1943 pll_freq |= (1 << PRCM_PLL_FREQ_N_SHIFT);
1944 writel(pll_freq, PRCM_PLLDSI_FREQ);
1945
1946 return 0;
1947}
1948
1949static void set_dsiclk_rate(u8 n, unsigned long rate)
1950{
1951 u32 val;
1952 u32 div;
1953
1954 div = clock_divider(pll_rate(PRCM_PLLDSI_FREQ,
1955 clock_rate(PRCMU_HDMICLK), PLL_RAW), rate);
1956
1957 dsiclk[n].divsel = (div == 1) ? PRCM_DSI_PLLOUT_SEL_PHI :
1958 (div == 2) ? PRCM_DSI_PLLOUT_SEL_PHI_2 :
1959 /* else */ PRCM_DSI_PLLOUT_SEL_PHI_4;
1960
1961 val = readl(PRCM_DSI_PLLOUT_SEL);
1962 val &= ~dsiclk[n].divsel_mask;
1963 val |= (dsiclk[n].divsel << dsiclk[n].divsel_shift);
1964 writel(val, PRCM_DSI_PLLOUT_SEL);
1965}
1966
1967static void set_dsiescclk_rate(u8 n, unsigned long rate)
1968{
1969 u32 val;
1970 u32 div;
1971
1972 div = clock_divider(clock_rate(PRCMU_TVCLK), rate);
1973 val = readl(PRCM_DSITVCLK_DIV);
1974 val &= ~dsiescclk[n].div_mask;
1975 val |= (min(div, (u32)255) << dsiescclk[n].div_shift);
1976 writel(val, PRCM_DSITVCLK_DIV);
1977}
1978
1979int prcmu_set_clock_rate(u8 clock, unsigned long rate)
1980{
1981 if (clock < PRCMU_NUM_REG_CLOCKS)
1982 set_clock_rate(clock, rate);
1983 else if (clock == PRCMU_ARMSS)
1984 return set_armss_rate(rate);
1985 else if (clock == PRCMU_PLLDSI)
1986 return set_plldsi_rate(rate);
1987 else if ((clock == PRCMU_DSI0CLK) || (clock == PRCMU_DSI1CLK))
1988 set_dsiclk_rate((clock - PRCMU_DSI0CLK), rate);
1989 else if ((PRCMU_DSI0ESCCLK <= clock) && (clock <= PRCMU_DSI2ESCCLK))
1990 set_dsiescclk_rate((clock - PRCMU_DSI0ESCCLK), rate);
1991 return 0;
1992}
1993
1994int db8500_prcmu_config_esram0_deep_sleep(u8 state)
1995{
1996 if ((state > ESRAM0_DEEP_SLEEP_STATE_RET) ||
1997 (state < ESRAM0_DEEP_SLEEP_STATE_OFF))
1998 return -EINVAL;
1999
2000 mutex_lock(&mb4_transfer.lock);
2001
2002 while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
2003 cpu_relax();
2004
2005 writeb(MB4H_MEM_ST, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
2006 writeb(((DDR_PWR_STATE_OFFHIGHLAT << 4) | DDR_PWR_STATE_ON),
2007 (tcdm_base + PRCM_REQ_MB4_DDR_ST_AP_SLEEP_IDLE));
2008 writeb(DDR_PWR_STATE_ON,
2009 (tcdm_base + PRCM_REQ_MB4_DDR_ST_AP_DEEP_IDLE));
2010 writeb(state, (tcdm_base + PRCM_REQ_MB4_ESRAM0_ST));
2011
2012 writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET);
2013 wait_for_completion(&mb4_transfer.work);
2014
2015 mutex_unlock(&mb4_transfer.lock);
2016
2017 return 0;
2018}
2019
2020int db8500_prcmu_config_hotdog(u8 threshold)
2021{
2022 mutex_lock(&mb4_transfer.lock);
2023
2024 while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
2025 cpu_relax();
2026
2027 writeb(threshold, (tcdm_base + PRCM_REQ_MB4_HOTDOG_THRESHOLD));
2028 writeb(MB4H_HOTDOG, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
2029
2030 writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET);
2031 wait_for_completion(&mb4_transfer.work);
2032
2033 mutex_unlock(&mb4_transfer.lock);
2034
2035 return 0;
2036}
2037
2038int db8500_prcmu_config_hotmon(u8 low, u8 high)
2039{
2040 mutex_lock(&mb4_transfer.lock);
2041
2042 while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
2043 cpu_relax();
2044
2045 writeb(low, (tcdm_base + PRCM_REQ_MB4_HOTMON_LOW));
2046 writeb(high, (tcdm_base + PRCM_REQ_MB4_HOTMON_HIGH));
2047 writeb((HOTMON_CONFIG_LOW | HOTMON_CONFIG_HIGH),
2048 (tcdm_base + PRCM_REQ_MB4_HOTMON_CONFIG));
2049 writeb(MB4H_HOTMON, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
2050
2051 writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET);
2052 wait_for_completion(&mb4_transfer.work);
2053
2054 mutex_unlock(&mb4_transfer.lock);
2055
2056 return 0;
2057}
2058EXPORT_SYMBOL_GPL(db8500_prcmu_config_hotmon);
2059
2060static int config_hot_period(u16 val)
2061{
2062 mutex_lock(&mb4_transfer.lock);
2063
2064 while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
2065 cpu_relax();
2066
2067 writew(val, (tcdm_base + PRCM_REQ_MB4_HOT_PERIOD));
2068 writeb(MB4H_HOT_PERIOD, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
2069
2070 writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET);
2071 wait_for_completion(&mb4_transfer.work);
2072
2073 mutex_unlock(&mb4_transfer.lock);
2074
2075 return 0;
2076}
2077
2078int db8500_prcmu_start_temp_sense(u16 cycles32k)
2079{
2080 if (cycles32k == 0xFFFF)
2081 return -EINVAL;
2082
2083 return config_hot_period(cycles32k);
2084}
2085EXPORT_SYMBOL_GPL(db8500_prcmu_start_temp_sense);
2086
2087int db8500_prcmu_stop_temp_sense(void)
2088{
2089 return config_hot_period(0xFFFF);
2090}
2091EXPORT_SYMBOL_GPL(db8500_prcmu_stop_temp_sense);
2092
2093static int prcmu_a9wdog(u8 cmd, u8 d0, u8 d1, u8 d2, u8 d3)
2094{
2095
2096 mutex_lock(&mb4_transfer.lock);
2097
2098 while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
2099 cpu_relax();
2100
2101 writeb(d0, (tcdm_base + PRCM_REQ_MB4_A9WDOG_0));
2102 writeb(d1, (tcdm_base + PRCM_REQ_MB4_A9WDOG_1));
2103 writeb(d2, (tcdm_base + PRCM_REQ_MB4_A9WDOG_2));
2104 writeb(d3, (tcdm_base + PRCM_REQ_MB4_A9WDOG_3));
2105
2106 writeb(cmd, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
2107
2108 writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET);
2109 wait_for_completion(&mb4_transfer.work);
2110
2111 mutex_unlock(&mb4_transfer.lock);
2112
2113 return 0;
2114
2115}
2116
2117int db8500_prcmu_config_a9wdog(u8 num, bool sleep_auto_off)
2118{
2119 BUG_ON(num == 0 || num > 0xf);
2120 return prcmu_a9wdog(MB4H_A9WDOG_CONF, num, 0, 0,
2121 sleep_auto_off ? A9WDOG_AUTO_OFF_EN :
2122 A9WDOG_AUTO_OFF_DIS);
2123}
2124EXPORT_SYMBOL(db8500_prcmu_config_a9wdog);
2125
2126int db8500_prcmu_enable_a9wdog(u8 id)
2127{
2128 return prcmu_a9wdog(MB4H_A9WDOG_EN, id, 0, 0, 0);
2129}
2130EXPORT_SYMBOL(db8500_prcmu_enable_a9wdog);
2131
2132int db8500_prcmu_disable_a9wdog(u8 id)
2133{
2134 return prcmu_a9wdog(MB4H_A9WDOG_DIS, id, 0, 0, 0);
2135}
2136EXPORT_SYMBOL(db8500_prcmu_disable_a9wdog);
2137
2138int db8500_prcmu_kick_a9wdog(u8 id)
2139{
2140 return prcmu_a9wdog(MB4H_A9WDOG_KICK, id, 0, 0, 0);
2141}
2142EXPORT_SYMBOL(db8500_prcmu_kick_a9wdog);
2143
2144/*
2145 * timeout is 28 bit, in ms.
2146 */
2147int db8500_prcmu_load_a9wdog(u8 id, u32 timeout)
2148{
2149 return prcmu_a9wdog(MB4H_A9WDOG_LOAD,
2150 (id & A9WDOG_ID_MASK) |
2151 /*
2152 * Put the lowest 28 bits of timeout at
2153 * offset 4. Four first bits are used for id.
2154 */
2155 (u8)((timeout << 4) & 0xf0),
2156 (u8)((timeout >> 4) & 0xff),
2157 (u8)((timeout >> 12) & 0xff),
2158 (u8)((timeout >> 20) & 0xff));
2159}
2160EXPORT_SYMBOL(db8500_prcmu_load_a9wdog);
2161
2162/**
2163 * prcmu_abb_read() - Read register value(s) from the ABB.
2164 * @slave: The I2C slave address.
2165 * @reg: The (start) register address.
2166 * @value: The read out value(s).
2167 * @size: The number of registers to read.
2168 *
2169 * Reads register value(s) from the ABB.
2170 * @size has to be 1 for the current firmware version.
2171 */
2172int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
2173{
2174 int r;
2175
2176 if (size != 1)
2177 return -EINVAL;
2178
2179 mutex_lock(&mb5_transfer.lock);
2180
2181 while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
2182 cpu_relax();
2183
2184 writeb(0, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB5));
2185 writeb(PRCMU_I2C_READ(slave), (tcdm_base + PRCM_REQ_MB5_I2C_SLAVE_OP));
2186 writeb(PRCMU_I2C_STOP_EN, (tcdm_base + PRCM_REQ_MB5_I2C_HW_BITS));
2187 writeb(reg, (tcdm_base + PRCM_REQ_MB5_I2C_REG));
2188 writeb(0, (tcdm_base + PRCM_REQ_MB5_I2C_VAL));
2189
2190 writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET);
2191
2192 if (!wait_for_completion_timeout(&mb5_transfer.work,
2193 msecs_to_jiffies(20000))) {
2194 pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",
2195 __func__);
2196 r = -EIO;
2197 } else {
2198 r = ((mb5_transfer.ack.status == I2C_RD_OK) ? 0 : -EIO);
2199 }
2200
2201 if (!r)
2202 *value = mb5_transfer.ack.value;
2203
2204 mutex_unlock(&mb5_transfer.lock);
2205
2206 return r;
2207}
2208
2209/**
2210 * prcmu_abb_write_masked() - Write masked register value(s) to the ABB.
2211 * @slave: The I2C slave address.
2212 * @reg: The (start) register address.
2213 * @value: The value(s) to write.
2214 * @mask: The mask(s) to use.
2215 * @size: The number of registers to write.
2216 *
2217 * Writes masked register value(s) to the ABB.
2218 * For each @value, only the bits set to 1 in the corresponding @mask
2219 * will be written. The other bits are not changed.
2220 * @size has to be 1 for the current firmware version.
2221 */
2222int prcmu_abb_write_masked(u8 slave, u8 reg, u8 *value, u8 *mask, u8 size)
2223{
2224 int r;
2225
2226 if (size != 1)
2227 return -EINVAL;
2228
2229 mutex_lock(&mb5_transfer.lock);
2230
2231 while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
2232 cpu_relax();
2233
2234 writeb(~*mask, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB5));
2235 writeb(PRCMU_I2C_WRITE(slave), (tcdm_base + PRCM_REQ_MB5_I2C_SLAVE_OP));
2236 writeb(PRCMU_I2C_STOP_EN, (tcdm_base + PRCM_REQ_MB5_I2C_HW_BITS));
2237 writeb(reg, (tcdm_base + PRCM_REQ_MB5_I2C_REG));
2238 writeb(*value, (tcdm_base + PRCM_REQ_MB5_I2C_VAL));
2239
2240 writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET);
2241
2242 if (!wait_for_completion_timeout(&mb5_transfer.work,
2243 msecs_to_jiffies(20000))) {
2244 pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",
2245 __func__);
2246 r = -EIO;
2247 } else {
2248 r = ((mb5_transfer.ack.status == I2C_WR_OK) ? 0 : -EIO);
2249 }
2250
2251 mutex_unlock(&mb5_transfer.lock);
2252
2253 return r;
2254}
2255
2256/**
2257 * prcmu_abb_write() - Write register value(s) to the ABB.
2258 * @slave: The I2C slave address.
2259 * @reg: The (start) register address.
2260 * @value: The value(s) to write.
2261 * @size: The number of registers to write.
2262 *
2263 * Writes register value(s) to the ABB.
2264 * @size has to be 1 for the current firmware version.
2265 */
2266int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
2267{
2268 u8 mask = ~0;
2269
2270 return prcmu_abb_write_masked(slave, reg, value, &mask, size);
2271}
2272
2273/**
2274 * prcmu_ac_wake_req - should be called whenever ARM wants to wakeup Modem
2275 */
2276int prcmu_ac_wake_req(void)
2277{
2278 u32 val;
2279 int ret = 0;
2280
2281 mutex_lock(&mb0_transfer.ac_wake_lock);
2282
2283 val = readl(PRCM_HOSTACCESS_REQ);
2284 if (val & PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ)
2285 goto unlock_and_return;
2286
2287 atomic_set(&ac_wake_req_state, 1);
2288
2289 /*
2290 * Force Modem Wake-up before hostaccess_req ping-pong.
2291 * It prevents Modem to enter in Sleep while acking the hostaccess
2292 * request. The 31us delay has been calculated by HWI.
2293 */
2294 val |= PRCM_HOSTACCESS_REQ_WAKE_REQ;
2295 writel(val, PRCM_HOSTACCESS_REQ);
2296
2297 udelay(31);
2298
2299 val |= PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ;
2300 writel(val, PRCM_HOSTACCESS_REQ);
2301
2302 if (!wait_for_completion_timeout(&mb0_transfer.ac_wake_work,
2303 msecs_to_jiffies(5000))) {
2304 pr_crit("prcmu: %s timed out (5 s) waiting for a reply.\n",
2305 __func__);
2306 ret = -EFAULT;
2307 }
2308
2309unlock_and_return:
2310 mutex_unlock(&mb0_transfer.ac_wake_lock);
2311 return ret;
2312}
2313
2314/**
2315 * prcmu_ac_sleep_req - called when ARM no longer needs to talk to modem
2316 */
2317void prcmu_ac_sleep_req(void)
2318{
2319 u32 val;
2320
2321 mutex_lock(&mb0_transfer.ac_wake_lock);
2322
2323 val = readl(PRCM_HOSTACCESS_REQ);
2324 if (!(val & PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ))
2325 goto unlock_and_return;
2326
2327 writel((val & ~PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ),
2328 PRCM_HOSTACCESS_REQ);
2329
2330 if (!wait_for_completion_timeout(&mb0_transfer.ac_wake_work,
2331 msecs_to_jiffies(5000))) {
2332 pr_crit("prcmu: %s timed out (5 s) waiting for a reply.\n",
2333 __func__);
2334 }
2335
2336 atomic_set(&ac_wake_req_state, 0);
2337
2338unlock_and_return:
2339 mutex_unlock(&mb0_transfer.ac_wake_lock);
2340}
2341
2342bool db8500_prcmu_is_ac_wake_requested(void)
2343{
2344 return (atomic_read(&ac_wake_req_state) != 0);
2345}
2346
2347/**
2348 * db8500_prcmu_system_reset - System reset
2349 *
2350 * Saves the reset reason code and then sets the APE_SOFTRST register which
2351 * fires interrupt to fw
2352 */
2353void db8500_prcmu_system_reset(u16 reset_code)
2354{
2355 writew(reset_code, (tcdm_base + PRCM_SW_RST_REASON));
2356 writel(1, PRCM_APE_SOFTRST);
2357}
2358
2359/**
2360 * db8500_prcmu_get_reset_code - Retrieve SW reset reason code
2361 *
2362 * Retrieves the reset reason code stored by prcmu_system_reset() before
2363 * last restart.
2364 */
2365u16 db8500_prcmu_get_reset_code(void)
2366{
2367 return readw(tcdm_base + PRCM_SW_RST_REASON);
2368}
2369
2370/**
2371 * db8500_prcmu_reset_modem - ask the PRCMU to reset modem
2372 */
2373void db8500_prcmu_modem_reset(void)
2374{
2375 mutex_lock(&mb1_transfer.lock);
2376
2377 while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
2378 cpu_relax();
2379
2380 writeb(MB1H_RESET_MODEM, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
2381 writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
2382 wait_for_completion(&mb1_transfer.work);
2383
2384 /*
2385 * No need to check return from PRCMU as modem should go in reset state
2386 * This state is already managed by upper layer
2387 */
2388
2389 mutex_unlock(&mb1_transfer.lock);
2390}
2391
2392static void ack_dbb_wakeup(void)
2393{
2394 unsigned long flags;
2395
2396 spin_lock_irqsave(&mb0_transfer.lock, flags);
2397
2398 while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
2399 cpu_relax();
2400
2401 writeb(MB0H_READ_WAKEUP_ACK, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0));
2402 writel(MBOX_BIT(0), PRCM_MBOX_CPU_SET);
2403
2404 spin_unlock_irqrestore(&mb0_transfer.lock, flags);
2405}
2406
2407static inline void print_unknown_header_warning(u8 n, u8 header)
2408{
2409 pr_warn("prcmu: Unknown message header (%d) in mailbox %d\n",
2410 header, n);
2411}
2412
2413static bool read_mailbox_0(void)
2414{
2415 bool r;
2416 u32 ev;
2417 unsigned int n;
2418 u8 header;
2419
2420 header = readb(tcdm_base + PRCM_MBOX_HEADER_ACK_MB0);
2421 switch (header) {
2422 case MB0H_WAKEUP_EXE:
2423 case MB0H_WAKEUP_SLEEP:
2424 if (readb(tcdm_base + PRCM_ACK_MB0_READ_POINTER) & 1)
2425 ev = readl(tcdm_base + PRCM_ACK_MB0_WAKEUP_1_8500);
2426 else
2427 ev = readl(tcdm_base + PRCM_ACK_MB0_WAKEUP_0_8500);
2428
2429 if (ev & (WAKEUP_BIT_AC_WAKE_ACK | WAKEUP_BIT_AC_SLEEP_ACK))
2430 complete(&mb0_transfer.ac_wake_work);
2431 if (ev & WAKEUP_BIT_SYSCLK_OK)
2432 complete(&mb3_transfer.sysclk_work);
2433
2434 ev &= mb0_transfer.req.dbb_irqs;
2435
2436 for (n = 0; n < NUM_PRCMU_WAKEUPS; n++) {
2437 if (ev & prcmu_irq_bit[n])
2438 generic_handle_irq(irq_find_mapping(db8500_irq_domain, n));
2439 }
2440 r = true;
2441 break;
2442 default:
2443 print_unknown_header_warning(0, header);
2444 r = false;
2445 break;
2446 }
2447 writel(MBOX_BIT(0), PRCM_ARM_IT1_CLR);
2448 return r;
2449}
2450
2451static bool read_mailbox_1(void)
2452{
2453 mb1_transfer.ack.header = readb(tcdm_base + PRCM_MBOX_HEADER_REQ_MB1);
2454 mb1_transfer.ack.arm_opp = readb(tcdm_base +
2455 PRCM_ACK_MB1_CURRENT_ARM_OPP);
2456 mb1_transfer.ack.ape_opp = readb(tcdm_base +
2457 PRCM_ACK_MB1_CURRENT_APE_OPP);
2458 mb1_transfer.ack.ape_voltage_status = readb(tcdm_base +
2459 PRCM_ACK_MB1_APE_VOLTAGE_STATUS);
2460 writel(MBOX_BIT(1), PRCM_ARM_IT1_CLR);
2461 complete(&mb1_transfer.work);
2462 return false;
2463}
2464
2465static bool read_mailbox_2(void)
2466{
2467 mb2_transfer.ack.status = readb(tcdm_base + PRCM_ACK_MB2_DPS_STATUS);
2468 writel(MBOX_BIT(2), PRCM_ARM_IT1_CLR);
2469 complete(&mb2_transfer.work);
2470 return false;
2471}
2472
2473static bool read_mailbox_3(void)
2474{
2475 writel(MBOX_BIT(3), PRCM_ARM_IT1_CLR);
2476 return false;
2477}
2478
2479static bool read_mailbox_4(void)
2480{
2481 u8 header;
2482 bool do_complete = true;
2483
2484 header = readb(tcdm_base + PRCM_MBOX_HEADER_REQ_MB4);
2485 switch (header) {
2486 case MB4H_MEM_ST:
2487 case MB4H_HOTDOG:
2488 case MB4H_HOTMON:
2489 case MB4H_HOT_PERIOD:
2490 case MB4H_A9WDOG_CONF:
2491 case MB4H_A9WDOG_EN:
2492 case MB4H_A9WDOG_DIS:
2493 case MB4H_A9WDOG_LOAD:
2494 case MB4H_A9WDOG_KICK:
2495 break;
2496 default:
2497 print_unknown_header_warning(4, header);
2498 do_complete = false;
2499 break;
2500 }
2501
2502 writel(MBOX_BIT(4), PRCM_ARM_IT1_CLR);
2503
2504 if (do_complete)
2505 complete(&mb4_transfer.work);
2506
2507 return false;
2508}
2509
2510static bool read_mailbox_5(void)
2511{
2512 mb5_transfer.ack.status = readb(tcdm_base + PRCM_ACK_MB5_I2C_STATUS);
2513 mb5_transfer.ack.value = readb(tcdm_base + PRCM_ACK_MB5_I2C_VAL);
2514 writel(MBOX_BIT(5), PRCM_ARM_IT1_CLR);
2515 complete(&mb5_transfer.work);
2516 return false;
2517}
2518
2519static bool read_mailbox_6(void)
2520{
2521 writel(MBOX_BIT(6), PRCM_ARM_IT1_CLR);
2522 return false;
2523}
2524
2525static bool read_mailbox_7(void)
2526{
2527 writel(MBOX_BIT(7), PRCM_ARM_IT1_CLR);
2528 return false;
2529}
2530
2531static bool (* const read_mailbox[NUM_MB])(void) = {
2532 read_mailbox_0,
2533 read_mailbox_1,
2534 read_mailbox_2,
2535 read_mailbox_3,
2536 read_mailbox_4,
2537 read_mailbox_5,
2538 read_mailbox_6,
2539 read_mailbox_7
2540};
2541
2542static irqreturn_t prcmu_irq_handler(int irq, void *data)
2543{
2544 u32 bits;
2545 u8 n;
2546 irqreturn_t r;
2547
2548 bits = (readl(PRCM_ARM_IT1_VAL) & ALL_MBOX_BITS);
2549 if (unlikely(!bits))
2550 return IRQ_NONE;
2551
2552 r = IRQ_HANDLED;
2553 for (n = 0; bits; n++) {
2554 if (bits & MBOX_BIT(n)) {
2555 bits -= MBOX_BIT(n);
2556 if (read_mailbox[n]())
2557 r = IRQ_WAKE_THREAD;
2558 }
2559 }
2560 return r;
2561}
2562
2563static irqreturn_t prcmu_irq_thread_fn(int irq, void *data)
2564{
2565 ack_dbb_wakeup();
2566 return IRQ_HANDLED;
2567}
2568
2569static void prcmu_mask_work(struct work_struct *work)
2570{
2571 unsigned long flags;
2572
2573 spin_lock_irqsave(&mb0_transfer.lock, flags);
2574
2575 config_wakeups();
2576
2577 spin_unlock_irqrestore(&mb0_transfer.lock, flags);
2578}
2579
2580static void prcmu_irq_mask(struct irq_data *d)
2581{
2582 unsigned long flags;
2583
2584 spin_lock_irqsave(&mb0_transfer.dbb_irqs_lock, flags);
2585
2586 mb0_transfer.req.dbb_irqs &= ~prcmu_irq_bit[d->hwirq];
2587
2588 spin_unlock_irqrestore(&mb0_transfer.dbb_irqs_lock, flags);
2589
2590 if (d->irq != IRQ_PRCMU_CA_SLEEP)
2591 schedule_work(&mb0_transfer.mask_work);
2592}
2593
2594static void prcmu_irq_unmask(struct irq_data *d)
2595{
2596 unsigned long flags;
2597
2598 spin_lock_irqsave(&mb0_transfer.dbb_irqs_lock, flags);
2599
2600 mb0_transfer.req.dbb_irqs |= prcmu_irq_bit[d->hwirq];
2601
2602 spin_unlock_irqrestore(&mb0_transfer.dbb_irqs_lock, flags);
2603
2604 if (d->irq != IRQ_PRCMU_CA_SLEEP)
2605 schedule_work(&mb0_transfer.mask_work);
2606}
2607
2608static void noop(struct irq_data *d)
2609{
2610}
2611
2612static struct irq_chip prcmu_irq_chip = {
2613 .name = "prcmu",
2614 .irq_disable = prcmu_irq_mask,
2615 .irq_ack = noop,
2616 .irq_mask = prcmu_irq_mask,
2617 .irq_unmask = prcmu_irq_unmask,
2618};
2619
2620static char *fw_project_name(u32 project)
2621{
2622 switch (project) {
2623 case PRCMU_FW_PROJECT_U8500:
2624 return "U8500";
2625 case PRCMU_FW_PROJECT_U8400:
2626 return "U8400";
2627 case PRCMU_FW_PROJECT_U9500:
2628 return "U9500";
2629 case PRCMU_FW_PROJECT_U8500_MBB:
2630 return "U8500 MBB";
2631 case PRCMU_FW_PROJECT_U8500_C1:
2632 return "U8500 C1";
2633 case PRCMU_FW_PROJECT_U8500_C2:
2634 return "U8500 C2";
2635 case PRCMU_FW_PROJECT_U8500_C3:
2636 return "U8500 C3";
2637 case PRCMU_FW_PROJECT_U8500_C4:
2638 return "U8500 C4";
2639 case PRCMU_FW_PROJECT_U9500_MBL:
2640 return "U9500 MBL";
2641 case PRCMU_FW_PROJECT_U8500_MBL:
2642 return "U8500 MBL";
2643 case PRCMU_FW_PROJECT_U8500_MBL2:
2644 return "U8500 MBL2";
2645 case PRCMU_FW_PROJECT_U8520:
2646 return "U8520 MBL";
2647 case PRCMU_FW_PROJECT_U8420:
2648 return "U8420";
2649 case PRCMU_FW_PROJECT_U9540:
2650 return "U9540";
2651 case PRCMU_FW_PROJECT_A9420:
2652 return "A9420";
2653 case PRCMU_FW_PROJECT_L8540:
2654 return "L8540";
2655 case PRCMU_FW_PROJECT_L8580:
2656 return "L8580";
2657 default:
2658 return "Unknown";
2659 }
2660}
2661
2662static int db8500_irq_map(struct irq_domain *d, unsigned int virq,
2663 irq_hw_number_t hwirq)
2664{
2665 irq_set_chip_and_handler(virq, &prcmu_irq_chip,
2666 handle_simple_irq);
2667
2668 return 0;
2669}
2670
2671static const struct irq_domain_ops db8500_irq_ops = {
2672 .map = db8500_irq_map,
2673 .xlate = irq_domain_xlate_twocell,
2674};
2675
2676static int db8500_irq_init(struct device_node *np)
2677{
2678 int i;
2679
2680 db8500_irq_domain = irq_domain_add_simple(
2681 np, NUM_PRCMU_WAKEUPS, 0,
2682 &db8500_irq_ops, NULL);
2683
2684 if (!db8500_irq_domain) {
2685 pr_err("Failed to create irqdomain\n");
2686 return -ENOSYS;
2687 }
2688
2689 /* All wakeups will be used, so create mappings for all */
2690 for (i = 0; i < NUM_PRCMU_WAKEUPS; i++)
2691 irq_create_mapping(db8500_irq_domain, i);
2692
2693 return 0;
2694}
2695
2696static void dbx500_fw_version_init(struct platform_device *pdev,
2697 u32 version_offset)
2698{
2699 struct resource *res;
2700 void __iomem *tcpm_base;
2701 u32 version;
2702
2703 res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
2704 "prcmu-tcpm");
2705 if (!res) {
2706 dev_err(&pdev->dev,
2707 "Error: no prcmu tcpm memory region provided\n");
2708 return;
2709 }
2710 tcpm_base = ioremap(res->start, resource_size(res));
2711 if (!tcpm_base) {
2712 dev_err(&pdev->dev, "no prcmu tcpm mem region provided\n");
2713 return;
2714 }
2715
2716 version = readl(tcpm_base + version_offset);
2717 fw_info.version.project = (version & 0xFF);
2718 fw_info.version.api_version = (version >> 8) & 0xFF;
2719 fw_info.version.func_version = (version >> 16) & 0xFF;
2720 fw_info.version.errata = (version >> 24) & 0xFF;
2721 strncpy(fw_info.version.project_name,
2722 fw_project_name(fw_info.version.project),
2723 PRCMU_FW_PROJECT_NAME_LEN);
2724 fw_info.valid = true;
2725 pr_info("PRCMU firmware: %s(%d), version %d.%d.%d\n",
2726 fw_info.version.project_name,
2727 fw_info.version.project,
2728 fw_info.version.api_version,
2729 fw_info.version.func_version,
2730 fw_info.version.errata);
2731 iounmap(tcpm_base);
2732}
2733
2734void __init db8500_prcmu_early_init(u32 phy_base, u32 size)
2735{
2736 /*
2737 * This is a temporary remap to bring up the clocks. It is
2738 * subsequently replaces with a real remap. After the merge of
2739 * the mailbox subsystem all of this early code goes away, and the
2740 * clock driver can probe independently. An early initcall will
2741 * still be needed, but it can be diverted into drivers/clk/ux500.
2742 */
2743 prcmu_base = ioremap(phy_base, size);
2744 if (!prcmu_base)
2745 pr_err("%s: ioremap() of prcmu registers failed!\n", __func__);
2746
2747 spin_lock_init(&mb0_transfer.lock);
2748 spin_lock_init(&mb0_transfer.dbb_irqs_lock);
2749 mutex_init(&mb0_transfer.ac_wake_lock);
2750 init_completion(&mb0_transfer.ac_wake_work);
2751 mutex_init(&mb1_transfer.lock);
2752 init_completion(&mb1_transfer.work);
2753 mb1_transfer.ape_opp = APE_NO_CHANGE;
2754 mutex_init(&mb2_transfer.lock);
2755 init_completion(&mb2_transfer.work);
2756 spin_lock_init(&mb2_transfer.auto_pm_lock);
2757 spin_lock_init(&mb3_transfer.lock);
2758 mutex_init(&mb3_transfer.sysclk_lock);
2759 init_completion(&mb3_transfer.sysclk_work);
2760 mutex_init(&mb4_transfer.lock);
2761 init_completion(&mb4_transfer.work);
2762 mutex_init(&mb5_transfer.lock);
2763 init_completion(&mb5_transfer.work);
2764
2765 INIT_WORK(&mb0_transfer.mask_work, prcmu_mask_work);
2766}
2767
2768static void init_prcm_registers(void)
2769{
2770 u32 val;
2771
2772 val = readl(PRCM_A9PL_FORCE_CLKEN);
2773 val &= ~(PRCM_A9PL_FORCE_CLKEN_PRCM_A9PL_FORCE_CLKEN |
2774 PRCM_A9PL_FORCE_CLKEN_PRCM_A9AXI_FORCE_CLKEN);
2775 writel(val, (PRCM_A9PL_FORCE_CLKEN));
2776}
2777
2778/*
2779 * Power domain switches (ePODs) modeled as regulators for the DB8500 SoC
2780 */
2781static struct regulator_consumer_supply db8500_vape_consumers[] = {
2782 REGULATOR_SUPPLY("v-ape", NULL),
2783 REGULATOR_SUPPLY("v-i2c", "nmk-i2c.0"),
2784 REGULATOR_SUPPLY("v-i2c", "nmk-i2c.1"),
2785 REGULATOR_SUPPLY("v-i2c", "nmk-i2c.2"),
2786 REGULATOR_SUPPLY("v-i2c", "nmk-i2c.3"),
2787 REGULATOR_SUPPLY("v-i2c", "nmk-i2c.4"),
2788 /* "v-mmc" changed to "vcore" in the mainline kernel */
2789 REGULATOR_SUPPLY("vcore", "sdi0"),
2790 REGULATOR_SUPPLY("vcore", "sdi1"),
2791 REGULATOR_SUPPLY("vcore", "sdi2"),
2792 REGULATOR_SUPPLY("vcore", "sdi3"),
2793 REGULATOR_SUPPLY("vcore", "sdi4"),
2794 REGULATOR_SUPPLY("v-dma", "dma40.0"),
2795 REGULATOR_SUPPLY("v-ape", "ab8500-usb.0"),
2796 /* "v-uart" changed to "vcore" in the mainline kernel */
2797 REGULATOR_SUPPLY("vcore", "uart0"),
2798 REGULATOR_SUPPLY("vcore", "uart1"),
2799 REGULATOR_SUPPLY("vcore", "uart2"),
2800 REGULATOR_SUPPLY("v-ape", "nmk-ske-keypad.0"),
2801 REGULATOR_SUPPLY("v-hsi", "ste_hsi.0"),
2802 REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
2803};
2804
2805static struct regulator_consumer_supply db8500_vsmps2_consumers[] = {
2806 REGULATOR_SUPPLY("musb_1v8", "ab8500-usb.0"),
2807 /* AV8100 regulator */
2808 REGULATOR_SUPPLY("hdmi_1v8", "0-0070"),
2809};
2810
2811static struct regulator_consumer_supply db8500_b2r2_mcde_consumers[] = {
2812 REGULATOR_SUPPLY("vsupply", "b2r2_bus"),
2813 REGULATOR_SUPPLY("vsupply", "mcde"),
2814};
2815
2816/* SVA MMDSP regulator switch */
2817static struct regulator_consumer_supply db8500_svammdsp_consumers[] = {
2818 REGULATOR_SUPPLY("sva-mmdsp", "cm_control"),
2819};
2820
2821/* SVA pipe regulator switch */
2822static struct regulator_consumer_supply db8500_svapipe_consumers[] = {
2823 REGULATOR_SUPPLY("sva-pipe", "cm_control"),
2824};
2825
2826/* SIA MMDSP regulator switch */
2827static struct regulator_consumer_supply db8500_siammdsp_consumers[] = {
2828 REGULATOR_SUPPLY("sia-mmdsp", "cm_control"),
2829};
2830
2831/* SIA pipe regulator switch */
2832static struct regulator_consumer_supply db8500_siapipe_consumers[] = {
2833 REGULATOR_SUPPLY("sia-pipe", "cm_control"),
2834};
2835
2836static struct regulator_consumer_supply db8500_sga_consumers[] = {
2837 REGULATOR_SUPPLY("v-mali", NULL),
2838};
2839
2840/* ESRAM1 and 2 regulator switch */
2841static struct regulator_consumer_supply db8500_esram12_consumers[] = {
2842 REGULATOR_SUPPLY("esram12", "cm_control"),
2843};
2844
2845/* ESRAM3 and 4 regulator switch */
2846static struct regulator_consumer_supply db8500_esram34_consumers[] = {
2847 REGULATOR_SUPPLY("v-esram34", "mcde"),
2848 REGULATOR_SUPPLY("esram34", "cm_control"),
2849 REGULATOR_SUPPLY("lcla_esram", "dma40.0"),
2850};
2851
2852static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = {
2853 [DB8500_REGULATOR_VAPE] = {
2854 .constraints = {
2855 .name = "db8500-vape",
2856 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
2857 .always_on = true,
2858 },
2859 .consumer_supplies = db8500_vape_consumers,
2860 .num_consumer_supplies = ARRAY_SIZE(db8500_vape_consumers),
2861 },
2862 [DB8500_REGULATOR_VARM] = {
2863 .constraints = {
2864 .name = "db8500-varm",
2865 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
2866 },
2867 },
2868 [DB8500_REGULATOR_VMODEM] = {
2869 .constraints = {
2870 .name = "db8500-vmodem",
2871 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
2872 },
2873 },
2874 [DB8500_REGULATOR_VPLL] = {
2875 .constraints = {
2876 .name = "db8500-vpll",
2877 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
2878 },
2879 },
2880 [DB8500_REGULATOR_VSMPS1] = {
2881 .constraints = {
2882 .name = "db8500-vsmps1",
2883 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
2884 },
2885 },
2886 [DB8500_REGULATOR_VSMPS2] = {
2887 .constraints = {
2888 .name = "db8500-vsmps2",
2889 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
2890 },
2891 .consumer_supplies = db8500_vsmps2_consumers,
2892 .num_consumer_supplies = ARRAY_SIZE(db8500_vsmps2_consumers),
2893 },
2894 [DB8500_REGULATOR_VSMPS3] = {
2895 .constraints = {
2896 .name = "db8500-vsmps3",
2897 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
2898 },
2899 },
2900 [DB8500_REGULATOR_VRF1] = {
2901 .constraints = {
2902 .name = "db8500-vrf1",
2903 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
2904 },
2905 },
2906 [DB8500_REGULATOR_SWITCH_SVAMMDSP] = {
2907 /* dependency to u8500-vape is handled outside regulator framework */
2908 .constraints = {
2909 .name = "db8500-sva-mmdsp",
2910 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
2911 },
2912 .consumer_supplies = db8500_svammdsp_consumers,
2913 .num_consumer_supplies = ARRAY_SIZE(db8500_svammdsp_consumers),
2914 },
2915 [DB8500_REGULATOR_SWITCH_SVAMMDSPRET] = {
2916 .constraints = {
2917 /* "ret" means "retention" */
2918 .name = "db8500-sva-mmdsp-ret",
2919 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
2920 },
2921 },
2922 [DB8500_REGULATOR_SWITCH_SVAPIPE] = {
2923 /* dependency to u8500-vape is handled outside regulator framework */
2924 .constraints = {
2925 .name = "db8500-sva-pipe",
2926 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
2927 },
2928 .consumer_supplies = db8500_svapipe_consumers,
2929 .num_consumer_supplies = ARRAY_SIZE(db8500_svapipe_consumers),
2930 },
2931 [DB8500_REGULATOR_SWITCH_SIAMMDSP] = {
2932 /* dependency to u8500-vape is handled outside regulator framework */
2933 .constraints = {
2934 .name = "db8500-sia-mmdsp",
2935 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
2936 },
2937 .consumer_supplies = db8500_siammdsp_consumers,
2938 .num_consumer_supplies = ARRAY_SIZE(db8500_siammdsp_consumers),
2939 },
2940 [DB8500_REGULATOR_SWITCH_SIAMMDSPRET] = {
2941 .constraints = {
2942 .name = "db8500-sia-mmdsp-ret",
2943 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
2944 },
2945 },
2946 [DB8500_REGULATOR_SWITCH_SIAPIPE] = {
2947 /* dependency to u8500-vape is handled outside regulator framework */
2948 .constraints = {
2949 .name = "db8500-sia-pipe",
2950 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
2951 },
2952 .consumer_supplies = db8500_siapipe_consumers,
2953 .num_consumer_supplies = ARRAY_SIZE(db8500_siapipe_consumers),
2954 },
2955 [DB8500_REGULATOR_SWITCH_SGA] = {
2956 .supply_regulator = "db8500-vape",
2957 .constraints = {
2958 .name = "db8500-sga",
2959 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
2960 },
2961 .consumer_supplies = db8500_sga_consumers,
2962 .num_consumer_supplies = ARRAY_SIZE(db8500_sga_consumers),
2963
2964 },
2965 [DB8500_REGULATOR_SWITCH_B2R2_MCDE] = {
2966 .supply_regulator = "db8500-vape",
2967 .constraints = {
2968 .name = "db8500-b2r2-mcde",
2969 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
2970 },
2971 .consumer_supplies = db8500_b2r2_mcde_consumers,
2972 .num_consumer_supplies = ARRAY_SIZE(db8500_b2r2_mcde_consumers),
2973 },
2974 [DB8500_REGULATOR_SWITCH_ESRAM12] = {
2975 /*
2976 * esram12 is set in retention and supplied by Vsafe when Vape is off,
2977 * no need to hold Vape
2978 */
2979 .constraints = {
2980 .name = "db8500-esram12",
2981 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
2982 },
2983 .consumer_supplies = db8500_esram12_consumers,
2984 .num_consumer_supplies = ARRAY_SIZE(db8500_esram12_consumers),
2985 },
2986 [DB8500_REGULATOR_SWITCH_ESRAM12RET] = {
2987 .constraints = {
2988 .name = "db8500-esram12-ret",
2989 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
2990 },
2991 },
2992 [DB8500_REGULATOR_SWITCH_ESRAM34] = {
2993 /*
2994 * esram34 is set in retention and supplied by Vsafe when Vape is off,
2995 * no need to hold Vape
2996 */
2997 .constraints = {
2998 .name = "db8500-esram34",
2999 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
3000 },
3001 .consumer_supplies = db8500_esram34_consumers,
3002 .num_consumer_supplies = ARRAY_SIZE(db8500_esram34_consumers),
3003 },
3004 [DB8500_REGULATOR_SWITCH_ESRAM34RET] = {
3005 .constraints = {
3006 .name = "db8500-esram34-ret",
3007 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
3008 },
3009 },
3010};
3011
3012static struct ux500_wdt_data db8500_wdt_pdata = {
3013 .timeout = 600, /* 10 minutes */
3014 .has_28_bits_resolution = true,
3015};
3016
3017static const struct mfd_cell common_prcmu_devs[] = {
3018 {
3019 .name = "ux500_wdt",
3020 .platform_data = &db8500_wdt_pdata,
3021 .pdata_size = sizeof(db8500_wdt_pdata),
3022 .id = -1,
3023 },
3024};
3025
3026static const struct mfd_cell db8500_prcmu_devs[] = {
3027 {
3028 .name = "db8500-prcmu-regulators",
3029 .of_compatible = "stericsson,db8500-prcmu-regulator",
3030 .platform_data = &db8500_regulators,
3031 .pdata_size = sizeof(db8500_regulators),
3032 },
3033 {
3034 .name = "cpuidle-dbx500",
3035 .of_compatible = "stericsson,cpuidle-dbx500",
3036 },
3037 {
3038 .name = "db8500-thermal",
3039 .of_compatible = "stericsson,db8500-thermal",
3040 },
3041};
3042
3043static int db8500_prcmu_register_ab8500(struct device *parent)
3044{
3045 struct device_node *np;
3046 struct resource ab8500_resource;
3047 const struct mfd_cell ab8500_cell = {
3048 .name = "ab8500-core",
3049 .of_compatible = "stericsson,ab8500",
3050 .id = AB8500_VERSION_AB8500,
3051 .resources = &ab8500_resource,
3052 .num_resources = 1,
3053 };
3054
3055 if (!parent->of_node)
3056 return -ENODEV;
3057
3058 /* Look up the device node, sneak the IRQ out of it */
3059 for_each_child_of_node(parent->of_node, np) {
3060 if (of_device_is_compatible(np, ab8500_cell.of_compatible))
3061 break;
3062 }
3063 if (!np) {
3064 dev_info(parent, "could not find AB8500 node in the device tree\n");
3065 return -ENODEV;
3066 }
3067 of_irq_to_resource_table(np, &ab8500_resource, 1);
3068
3069 return mfd_add_devices(parent, 0, &ab8500_cell, 1, NULL, 0, NULL);
3070}
3071
3072/**
3073 * prcmu_fw_init - arch init call for the Linux PRCMU fw init logic
3074 *
3075 */
3076static int db8500_prcmu_probe(struct platform_device *pdev)
3077{
3078 struct device_node *np = pdev->dev.of_node;
3079 int irq = 0, err = 0;
3080 struct resource *res;
3081
3082 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "prcmu");
3083 if (!res) {
3084 dev_err(&pdev->dev, "no prcmu memory region provided\n");
3085 return -EINVAL;
3086 }
3087 prcmu_base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
3088 if (!prcmu_base) {
3089 dev_err(&pdev->dev,
3090 "failed to ioremap prcmu register memory\n");
3091 return -ENOMEM;
3092 }
3093 init_prcm_registers();
3094 dbx500_fw_version_init(pdev, DB8500_PRCMU_FW_VERSION_OFFSET);
3095 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "prcmu-tcdm");
3096 if (!res) {
3097 dev_err(&pdev->dev, "no prcmu tcdm region provided\n");
3098 return -EINVAL;
3099 }
3100 tcdm_base = devm_ioremap(&pdev->dev, res->start,
3101 resource_size(res));
3102 if (!tcdm_base) {
3103 dev_err(&pdev->dev,
3104 "failed to ioremap prcmu-tcdm register memory\n");
3105 return -ENOMEM;
3106 }
3107
3108 /* Clean up the mailbox interrupts after pre-kernel code. */
3109 writel(ALL_MBOX_BITS, PRCM_ARM_IT1_CLR);
3110
3111 irq = platform_get_irq(pdev, 0);
3112 if (irq <= 0)
3113 return irq;
3114
3115 err = request_threaded_irq(irq, prcmu_irq_handler,
3116 prcmu_irq_thread_fn, IRQF_NO_SUSPEND, "prcmu", NULL);
3117 if (err < 0) {
3118 pr_err("prcmu: Failed to allocate IRQ_DB8500_PRCMU1.\n");
3119 return err;
3120 }
3121
3122 db8500_irq_init(np);
3123
3124 prcmu_config_esram0_deep_sleep(ESRAM0_DEEP_SLEEP_STATE_RET);
3125
3126 err = mfd_add_devices(&pdev->dev, 0, common_prcmu_devs,
3127 ARRAY_SIZE(common_prcmu_devs), NULL, 0, db8500_irq_domain);
3128 if (err) {
3129 pr_err("prcmu: Failed to add subdevices\n");
3130 return err;
3131 }
3132
3133 /* TODO: Remove restriction when clk definitions are available. */
3134 if (!of_machine_is_compatible("st-ericsson,u8540")) {
3135 err = mfd_add_devices(&pdev->dev, 0, db8500_prcmu_devs,
3136 ARRAY_SIZE(db8500_prcmu_devs), NULL, 0,
3137 db8500_irq_domain);
3138 if (err) {
3139 mfd_remove_devices(&pdev->dev);
3140 pr_err("prcmu: Failed to add subdevices\n");
3141 return err;
3142 }
3143 }
3144
3145 err = db8500_prcmu_register_ab8500(&pdev->dev);
3146 if (err) {
3147 mfd_remove_devices(&pdev->dev);
3148 pr_err("prcmu: Failed to add ab8500 subdevice\n");
3149 return err;
3150 }
3151
3152 pr_info("DB8500 PRCMU initialized\n");
3153 return err;
3154}
3155static const struct of_device_id db8500_prcmu_match[] = {
3156 { .compatible = "stericsson,db8500-prcmu"},
3157 { },
3158};
3159
3160static struct platform_driver db8500_prcmu_driver = {
3161 .driver = {
3162 .name = "db8500-prcmu",
3163 .of_match_table = db8500_prcmu_match,
3164 },
3165 .probe = db8500_prcmu_probe,
3166};
3167
3168static int __init db8500_prcmu_init(void)
3169{
3170 return platform_driver_register(&db8500_prcmu_driver);
3171}
3172core_initcall(db8500_prcmu_init);