Linux Audio

Check our new training course

Loading...
v5.9
  1# SPDX-License-Identifier: GPL-2.0
  2#
  3# Makefile for the Linux kernel device drivers.
  4#
  5# 15 Sep 2000, Christoph Hellwig <hch@infradead.org>
  6# Rewritten to use lists instead of if-statements.
  7#
  8
  9obj-y				+= irqchip
 10obj-y				+= bus
 11
 12obj-$(CONFIG_GENERIC_PHY)	+= phy
 13
 14# GPIO must come after pinctrl as gpios may need to mux pins etc
 15obj-$(CONFIG_PINCTRL)		+= pinctrl
 16obj-$(CONFIG_GPIOLIB)		+= gpio
 17obj-y				+= pwm
 18
 19obj-y				+= pci
 20
 21obj-$(CONFIG_PARISC)		+= parisc
 22obj-$(CONFIG_RAPIDIO)		+= rapidio
 23obj-y				+= video
 24obj-y				+= idle
 25
 26# IPMI must come before ACPI in order to provide IPMI opregion support
 27obj-y				+= char/ipmi
 28
 29obj-$(CONFIG_ACPI)		+= acpi
 30obj-$(CONFIG_SFI)		+= sfi
 31# PnP must come after ACPI since it will eventually need to check if acpi
 32# was used and do nothing if so
 33obj-$(CONFIG_PNP)		+= pnp
 34obj-y				+= amba
 35
 36obj-y				+= clk
 37# Many drivers will want to use DMA so this has to be made available
 38# really early.
 39obj-$(CONFIG_DMADEVICES)	+= dma
 40
 41# SOC specific infrastructure drivers.
 42obj-y				+= soc
 43
 44obj-$(CONFIG_VIRTIO)		+= virtio
 45obj-$(CONFIG_VDPA)		+= vdpa
 46obj-$(CONFIG_XEN)		+= xen
 47
 48# regulators early, since some subsystems rely on them to initialize
 49obj-$(CONFIG_REGULATOR)		+= regulator
 50
 51# reset controllers early, since gpu drivers might rely on them to initialize
 52obj-$(CONFIG_RESET_CONTROLLER)	+= reset
 53
 54# tty comes before char so that the VT console is the boot-time
 55# default.
 56obj-y				+= tty
 57obj-y				+= char
 58
 59# iommu comes before gpu as gpu are using iommu controllers
 60obj-y				+= iommu
 61
 62# gpu comes after char for AGP vs DRM startup and after iommu
 63obj-y				+= gpu
 64
 65obj-$(CONFIG_CONNECTOR)		+= connector
 66
 67# i810fb and intelfb depend on char/agp
 68obj-$(CONFIG_FB_I810)           += video/fbdev/i810
 69obj-$(CONFIG_FB_INTEL)          += video/fbdev/intelfb
 70
 71obj-$(CONFIG_PARPORT)		+= parport
 72obj-$(CONFIG_NVM)		+= lightnvm
 73obj-y				+= base block misc mfd nfc
 74obj-$(CONFIG_LIBNVDIMM)		+= nvdimm
 75obj-$(CONFIG_DAX)		+= dax
 76obj-$(CONFIG_DMA_SHARED_BUFFER) += dma-buf
 77obj-$(CONFIG_NUBUS)		+= nubus
 78obj-y				+= macintosh
 79obj-$(CONFIG_IDE)		+= ide
 80obj-y				+= scsi
 81obj-y				+= nvme
 82obj-$(CONFIG_ATA)		+= ata
 83obj-$(CONFIG_TARGET_CORE)	+= target
 84obj-$(CONFIG_MTD)		+= mtd
 85obj-$(CONFIG_SPI)		+= spi
 86obj-$(CONFIG_SPMI)		+= spmi
 87obj-$(CONFIG_HSI)		+= hsi
 88obj-$(CONFIG_SLIMBUS)		+= slimbus
 89obj-y				+= net
 90obj-$(CONFIG_ATM)		+= atm
 91obj-$(CONFIG_FUSION)		+= message
 92obj-y				+= firewire
 93obj-$(CONFIG_UIO)		+= uio
 94obj-$(CONFIG_VFIO)		+= vfio
 95obj-y				+= cdrom
 96obj-y				+= auxdisplay
 97obj-$(CONFIG_PCCARD)		+= pcmcia
 98obj-$(CONFIG_DIO)		+= dio
 99obj-$(CONFIG_SBUS)		+= sbus
100obj-$(CONFIG_ZORRO)		+= zorro
101obj-$(CONFIG_ATA_OVER_ETH)	+= block/aoe
102obj-$(CONFIG_PARIDE) 		+= block/paride
103obj-$(CONFIG_TC)		+= tc
104obj-$(CONFIG_USB_PHY)		+= usb
105obj-$(CONFIG_USB)		+= usb
106obj-$(CONFIG_USB_SUPPORT)	+= usb
107obj-$(CONFIG_PCI)		+= usb
108obj-$(CONFIG_USB_GADGET)	+= usb
109obj-$(CONFIG_OF)		+= usb
110obj-$(CONFIG_SERIO)		+= input/serio
111obj-$(CONFIG_GAMEPORT)		+= input/gameport
112obj-$(CONFIG_INPUT)		+= input
113obj-$(CONFIG_RTC_LIB)		+= rtc
114obj-y				+= i2c i3c media
115obj-$(CONFIG_PPS)		+= pps
116obj-y				+= ptp
117obj-$(CONFIG_W1)		+= w1
118obj-y				+= power
119obj-$(CONFIG_HWMON)		+= hwmon
120obj-$(CONFIG_THERMAL)		+= thermal
121obj-$(CONFIG_WATCHDOG)		+= watchdog
122obj-$(CONFIG_MD)		+= md
123obj-$(CONFIG_BT)		+= bluetooth
124obj-$(CONFIG_ACCESSIBILITY)	+= accessibility
125obj-$(CONFIG_ISDN)		+= isdn
126obj-$(CONFIG_EDAC)		+= edac
127obj-$(CONFIG_EISA)		+= eisa
128obj-$(CONFIG_PM_OPP)		+= opp
129obj-$(CONFIG_CPU_FREQ)		+= cpufreq
130obj-$(CONFIG_CPU_IDLE)		+= cpuidle
131obj-y				+= mmc
132obj-$(CONFIG_MEMSTICK)		+= memstick
133obj-$(CONFIG_NEW_LEDS)		+= leds
134obj-$(CONFIG_INFINIBAND)	+= infiniband
135obj-y				+= firmware
136obj-$(CONFIG_CRYPTO)		+= crypto
137obj-$(CONFIG_SUPERH)		+= sh
138ifndef CONFIG_ARCH_USES_GETTIMEOFFSET
139obj-y				+= clocksource
140endif
141obj-$(CONFIG_DCA)		+= dca
142obj-$(CONFIG_HID)		+= hid
143obj-$(CONFIG_PPC_PS3)		+= ps3
144obj-$(CONFIG_OF)		+= of
145obj-$(CONFIG_SSB)		+= ssb
146obj-$(CONFIG_BCMA)		+= bcma
147obj-$(CONFIG_VHOST_RING)	+= vhost
148obj-$(CONFIG_VHOST)		+= vhost
149obj-$(CONFIG_VLYNQ)		+= vlynq
150obj-$(CONFIG_GREYBUS)		+= greybus
151obj-$(CONFIG_STAGING)		+= staging
152obj-y				+= platform
153
154obj-$(CONFIG_MAILBOX)		+= mailbox
155obj-$(CONFIG_HWSPINLOCK)	+= hwspinlock
156obj-$(CONFIG_REMOTEPROC)	+= remoteproc
157obj-$(CONFIG_RPMSG)		+= rpmsg
158obj-$(CONFIG_SOUNDWIRE)		+= soundwire
159
160# Virtualization drivers
161obj-$(CONFIG_VIRT_DRIVERS)	+= virt
162obj-$(CONFIG_HYPERV)		+= hv
163
164obj-$(CONFIG_PM_DEVFREQ)	+= devfreq
165obj-$(CONFIG_EXTCON)		+= extcon
166obj-$(CONFIG_MEMORY)		+= memory
167obj-$(CONFIG_IIO)		+= iio
168obj-$(CONFIG_VME_BUS)		+= vme
169obj-$(CONFIG_IPACK_BUS)		+= ipack
170obj-$(CONFIG_NTB)		+= ntb
171obj-$(CONFIG_POWERCAP)		+= powercap
172obj-$(CONFIG_MCB)		+= mcb
173obj-$(CONFIG_PERF_EVENTS)	+= perf
174obj-$(CONFIG_RAS)		+= ras
175obj-$(CONFIG_USB4)		+= thunderbolt
176obj-$(CONFIG_CORESIGHT)		+= hwtracing/coresight
177obj-y				+= hwtracing/intel_th
178obj-$(CONFIG_STM)		+= hwtracing/stm
179obj-$(CONFIG_ANDROID)		+= android
180obj-$(CONFIG_NVMEM)		+= nvmem
181obj-$(CONFIG_FPGA)		+= fpga
182obj-$(CONFIG_FSI)		+= fsi
183obj-$(CONFIG_TEE)		+= tee
184obj-$(CONFIG_MULTIPLEXER)	+= mux
185obj-$(CONFIG_UNISYS_VISORBUS)	+= visorbus
186obj-$(CONFIG_SIOX)		+= siox
187obj-$(CONFIG_GNSS)		+= gnss
188obj-$(CONFIG_INTERCONNECT)	+= interconnect
189obj-$(CONFIG_COUNTER)		+= counter
190obj-$(CONFIG_MOST)		+= most
v5.4
  1# SPDX-License-Identifier: GPL-2.0
  2#
  3# Makefile for the Linux kernel device drivers.
  4#
  5# 15 Sep 2000, Christoph Hellwig <hch@infradead.org>
  6# Rewritten to use lists instead of if-statements.
  7#
  8
  9obj-y				+= irqchip
 10obj-y				+= bus
 11
 12obj-$(CONFIG_GENERIC_PHY)	+= phy
 13
 14# GPIO must come after pinctrl as gpios may need to mux pins etc
 15obj-$(CONFIG_PINCTRL)		+= pinctrl
 16obj-$(CONFIG_GPIOLIB)		+= gpio
 17obj-y				+= pwm
 18
 19obj-y				+= pci
 20
 21obj-$(CONFIG_PARISC)		+= parisc
 22obj-$(CONFIG_RAPIDIO)		+= rapidio
 23obj-y				+= video
 24obj-y				+= idle
 25
 26# IPMI must come before ACPI in order to provide IPMI opregion support
 27obj-y				+= char/ipmi
 28
 29obj-$(CONFIG_ACPI)		+= acpi
 30obj-$(CONFIG_SFI)		+= sfi
 31# PnP must come after ACPI since it will eventually need to check if acpi
 32# was used and do nothing if so
 33obj-$(CONFIG_PNP)		+= pnp
 34obj-y				+= amba
 35
 36obj-y				+= clk
 37# Many drivers will want to use DMA so this has to be made available
 38# really early.
 39obj-$(CONFIG_DMADEVICES)	+= dma
 40
 41# SOC specific infrastructure drivers.
 42obj-y				+= soc
 43
 44obj-$(CONFIG_VIRTIO)		+= virtio
 
 45obj-$(CONFIG_XEN)		+= xen
 46
 47# regulators early, since some subsystems rely on them to initialize
 48obj-$(CONFIG_REGULATOR)		+= regulator
 49
 50# reset controllers early, since gpu drivers might rely on them to initialize
 51obj-$(CONFIG_RESET_CONTROLLER)	+= reset
 52
 53# tty comes before char so that the VT console is the boot-time
 54# default.
 55obj-y				+= tty
 56obj-y				+= char
 57
 58# iommu comes before gpu as gpu are using iommu controllers
 59obj-y				+= iommu
 60
 61# gpu comes after char for AGP vs DRM startup and after iommu
 62obj-y				+= gpu
 63
 64obj-$(CONFIG_CONNECTOR)		+= connector
 65
 66# i810fb and intelfb depend on char/agp
 67obj-$(CONFIG_FB_I810)           += video/fbdev/i810
 68obj-$(CONFIG_FB_INTEL)          += video/fbdev/intelfb
 69
 70obj-$(CONFIG_PARPORT)		+= parport
 71obj-$(CONFIG_NVM)		+= lightnvm
 72obj-y				+= base block misc mfd nfc
 73obj-$(CONFIG_LIBNVDIMM)		+= nvdimm
 74obj-$(CONFIG_DAX)		+= dax
 75obj-$(CONFIG_DMA_SHARED_BUFFER) += dma-buf
 76obj-$(CONFIG_NUBUS)		+= nubus
 77obj-y				+= macintosh
 78obj-$(CONFIG_IDE)		+= ide
 79obj-y				+= scsi
 80obj-y				+= nvme
 81obj-$(CONFIG_ATA)		+= ata
 82obj-$(CONFIG_TARGET_CORE)	+= target
 83obj-$(CONFIG_MTD)		+= mtd
 84obj-$(CONFIG_SPI)		+= spi
 85obj-$(CONFIG_SPMI)		+= spmi
 86obj-$(CONFIG_HSI)		+= hsi
 87obj-$(CONFIG_SLIMBUS)		+= slimbus
 88obj-y				+= net
 89obj-$(CONFIG_ATM)		+= atm
 90obj-$(CONFIG_FUSION)		+= message
 91obj-y				+= firewire
 92obj-$(CONFIG_UIO)		+= uio
 93obj-$(CONFIG_VFIO)		+= vfio
 94obj-y				+= cdrom
 95obj-y				+= auxdisplay
 96obj-$(CONFIG_PCCARD)		+= pcmcia
 97obj-$(CONFIG_DIO)		+= dio
 98obj-$(CONFIG_SBUS)		+= sbus
 99obj-$(CONFIG_ZORRO)		+= zorro
100obj-$(CONFIG_ATA_OVER_ETH)	+= block/aoe
101obj-$(CONFIG_PARIDE) 		+= block/paride
102obj-$(CONFIG_TC)		+= tc
103obj-$(CONFIG_USB_PHY)		+= usb
104obj-$(CONFIG_USB)		+= usb
105obj-$(CONFIG_USB_SUPPORT)	+= usb
106obj-$(CONFIG_PCI)		+= usb
107obj-$(CONFIG_USB_GADGET)	+= usb
108obj-$(CONFIG_OF)		+= usb
109obj-$(CONFIG_SERIO)		+= input/serio
110obj-$(CONFIG_GAMEPORT)		+= input/gameport
111obj-$(CONFIG_INPUT)		+= input
112obj-$(CONFIG_RTC_LIB)		+= rtc
113obj-y				+= i2c i3c media
114obj-$(CONFIG_PPS)		+= pps
115obj-y				+= ptp
116obj-$(CONFIG_W1)		+= w1
117obj-y				+= power
118obj-$(CONFIG_HWMON)		+= hwmon
119obj-$(CONFIG_THERMAL)		+= thermal
120obj-$(CONFIG_WATCHDOG)		+= watchdog
121obj-$(CONFIG_MD)		+= md
122obj-$(CONFIG_BT)		+= bluetooth
123obj-$(CONFIG_ACCESSIBILITY)	+= accessibility
124obj-$(CONFIG_ISDN)		+= isdn
125obj-$(CONFIG_EDAC)		+= edac
126obj-$(CONFIG_EISA)		+= eisa
127obj-$(CONFIG_PM_OPP)		+= opp
128obj-$(CONFIG_CPU_FREQ)		+= cpufreq
129obj-$(CONFIG_CPU_IDLE)		+= cpuidle
130obj-y				+= mmc
131obj-$(CONFIG_MEMSTICK)		+= memstick
132obj-$(CONFIG_NEW_LEDS)		+= leds
133obj-$(CONFIG_INFINIBAND)	+= infiniband
134obj-y				+= firmware
135obj-$(CONFIG_CRYPTO)		+= crypto
136obj-$(CONFIG_SUPERH)		+= sh
137ifndef CONFIG_ARCH_USES_GETTIMEOFFSET
138obj-y				+= clocksource
139endif
140obj-$(CONFIG_DCA)		+= dca
141obj-$(CONFIG_HID)		+= hid
142obj-$(CONFIG_PPC_PS3)		+= ps3
143obj-$(CONFIG_OF)		+= of
144obj-$(CONFIG_SSB)		+= ssb
145obj-$(CONFIG_BCMA)		+= bcma
146obj-$(CONFIG_VHOST_RING)	+= vhost
147obj-$(CONFIG_VHOST)		+= vhost
148obj-$(CONFIG_VLYNQ)		+= vlynq
149obj-$(CONFIG_GREYBUS)		+= greybus
150obj-$(CONFIG_STAGING)		+= staging
151obj-y				+= platform
152
153obj-$(CONFIG_MAILBOX)		+= mailbox
154obj-$(CONFIG_HWSPINLOCK)	+= hwspinlock
155obj-$(CONFIG_REMOTEPROC)	+= remoteproc
156obj-$(CONFIG_RPMSG)		+= rpmsg
157obj-$(CONFIG_SOUNDWIRE)		+= soundwire
158
159# Virtualization drivers
160obj-$(CONFIG_VIRT_DRIVERS)	+= virt
161obj-$(CONFIG_HYPERV)		+= hv
162
163obj-$(CONFIG_PM_DEVFREQ)	+= devfreq
164obj-$(CONFIG_EXTCON)		+= extcon
165obj-$(CONFIG_MEMORY)		+= memory
166obj-$(CONFIG_IIO)		+= iio
167obj-$(CONFIG_VME_BUS)		+= vme
168obj-$(CONFIG_IPACK_BUS)		+= ipack
169obj-$(CONFIG_NTB)		+= ntb
170obj-$(CONFIG_POWERCAP)		+= powercap
171obj-$(CONFIG_MCB)		+= mcb
172obj-$(CONFIG_PERF_EVENTS)	+= perf
173obj-$(CONFIG_RAS)		+= ras
174obj-$(CONFIG_THUNDERBOLT)	+= thunderbolt
175obj-$(CONFIG_CORESIGHT)		+= hwtracing/coresight
176obj-y				+= hwtracing/intel_th
177obj-$(CONFIG_STM)		+= hwtracing/stm
178obj-$(CONFIG_ANDROID)		+= android
179obj-$(CONFIG_NVMEM)		+= nvmem
180obj-$(CONFIG_FPGA)		+= fpga
181obj-$(CONFIG_FSI)		+= fsi
182obj-$(CONFIG_TEE)		+= tee
183obj-$(CONFIG_MULTIPLEXER)	+= mux
184obj-$(CONFIG_UNISYS_VISORBUS)	+= visorbus
185obj-$(CONFIG_SIOX)		+= siox
186obj-$(CONFIG_GNSS)		+= gnss
187obj-$(CONFIG_INTERCONNECT)	+= interconnect
188obj-$(CONFIG_COUNTER)		+= counter