Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (C) Ericsson AB 2007-2008
4 * Copyright (C) ST-Ericsson SA 2008-2010
5 * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson
6 * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson
7 */
8
9#include <linux/dma-mapping.h>
10#include <linux/kernel.h>
11#include <linux/slab.h>
12#include <linux/export.h>
13#include <linux/dmaengine.h>
14#include <linux/platform_device.h>
15#include <linux/clk.h>
16#include <linux/delay.h>
17#include <linux/log2.h>
18#include <linux/pm.h>
19#include <linux/pm_runtime.h>
20#include <linux/err.h>
21#include <linux/of.h>
22#include <linux/of_dma.h>
23#include <linux/amba/bus.h>
24#include <linux/regulator/consumer.h>
25#include <linux/platform_data/dma-ste-dma40.h>
26
27#include "dmaengine.h"
28#include "ste_dma40_ll.h"
29
30#define D40_NAME "dma40"
31
32#define D40_PHY_CHAN -1
33
34/* For masking out/in 2 bit channel positions */
35#define D40_CHAN_POS(chan) (2 * (chan / 2))
36#define D40_CHAN_POS_MASK(chan) (0x3 << D40_CHAN_POS(chan))
37
38/* Maximum iterations taken before giving up suspending a channel */
39#define D40_SUSPEND_MAX_IT 500
40
41/* Milliseconds */
42#define DMA40_AUTOSUSPEND_DELAY 100
43
44/* Hardware requirement on LCLA alignment */
45#define LCLA_ALIGNMENT 0x40000
46
47/* Max number of links per event group */
48#define D40_LCLA_LINK_PER_EVENT_GRP 128
49#define D40_LCLA_END D40_LCLA_LINK_PER_EVENT_GRP
50
51/* Max number of logical channels per physical channel */
52#define D40_MAX_LOG_CHAN_PER_PHY 32
53
54/* Attempts before giving up to trying to get pages that are aligned */
55#define MAX_LCLA_ALLOC_ATTEMPTS 256
56
57/* Bit markings for allocation map */
58#define D40_ALLOC_FREE BIT(31)
59#define D40_ALLOC_PHY BIT(30)
60#define D40_ALLOC_LOG_FREE 0
61
62#define D40_MEMCPY_MAX_CHANS 8
63
64/* Reserved event lines for memcpy only. */
65#define DB8500_DMA_MEMCPY_EV_0 51
66#define DB8500_DMA_MEMCPY_EV_1 56
67#define DB8500_DMA_MEMCPY_EV_2 57
68#define DB8500_DMA_MEMCPY_EV_3 58
69#define DB8500_DMA_MEMCPY_EV_4 59
70#define DB8500_DMA_MEMCPY_EV_5 60
71
72static int dma40_memcpy_channels[] = {
73 DB8500_DMA_MEMCPY_EV_0,
74 DB8500_DMA_MEMCPY_EV_1,
75 DB8500_DMA_MEMCPY_EV_2,
76 DB8500_DMA_MEMCPY_EV_3,
77 DB8500_DMA_MEMCPY_EV_4,
78 DB8500_DMA_MEMCPY_EV_5,
79};
80
81/* Default configuration for physcial memcpy */
82static const struct stedma40_chan_cfg dma40_memcpy_conf_phy = {
83 .mode = STEDMA40_MODE_PHYSICAL,
84 .dir = DMA_MEM_TO_MEM,
85
86 .src_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
87 .src_info.psize = STEDMA40_PSIZE_PHY_1,
88 .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
89
90 .dst_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
91 .dst_info.psize = STEDMA40_PSIZE_PHY_1,
92 .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
93};
94
95/* Default configuration for logical memcpy */
96static const struct stedma40_chan_cfg dma40_memcpy_conf_log = {
97 .mode = STEDMA40_MODE_LOGICAL,
98 .dir = DMA_MEM_TO_MEM,
99
100 .src_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
101 .src_info.psize = STEDMA40_PSIZE_LOG_1,
102 .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
103
104 .dst_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
105 .dst_info.psize = STEDMA40_PSIZE_LOG_1,
106 .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
107};
108
109/**
110 * enum 40_command - The different commands and/or statuses.
111 *
112 * @D40_DMA_STOP: DMA channel command STOP or status STOPPED,
113 * @D40_DMA_RUN: The DMA channel is RUNNING of the command RUN.
114 * @D40_DMA_SUSPEND_REQ: Request the DMA to SUSPEND as soon as possible.
115 * @D40_DMA_SUSPENDED: The DMA channel is SUSPENDED.
116 */
117enum d40_command {
118 D40_DMA_STOP = 0,
119 D40_DMA_RUN = 1,
120 D40_DMA_SUSPEND_REQ = 2,
121 D40_DMA_SUSPENDED = 3
122};
123
124/*
125 * enum d40_events - The different Event Enables for the event lines.
126 *
127 * @D40_DEACTIVATE_EVENTLINE: De-activate Event line, stopping the logical chan.
128 * @D40_ACTIVATE_EVENTLINE: Activate the Event line, to start a logical chan.
129 * @D40_SUSPEND_REQ_EVENTLINE: Requesting for suspending a event line.
130 * @D40_ROUND_EVENTLINE: Status check for event line.
131 */
132
133enum d40_events {
134 D40_DEACTIVATE_EVENTLINE = 0,
135 D40_ACTIVATE_EVENTLINE = 1,
136 D40_SUSPEND_REQ_EVENTLINE = 2,
137 D40_ROUND_EVENTLINE = 3
138};
139
140/*
141 * These are the registers that has to be saved and later restored
142 * when the DMA hw is powered off.
143 * TODO: Add save/restore of D40_DREG_GCC on dma40 v3 or later, if that works.
144 */
145static __maybe_unused u32 d40_backup_regs[] = {
146 D40_DREG_LCPA,
147 D40_DREG_LCLA,
148 D40_DREG_PRMSE,
149 D40_DREG_PRMSO,
150 D40_DREG_PRMOE,
151 D40_DREG_PRMOO,
152};
153
154#define BACKUP_REGS_SZ ARRAY_SIZE(d40_backup_regs)
155
156/*
157 * since 9540 and 8540 has the same HW revision
158 * use v4a for 9540 or ealier
159 * use v4b for 8540 or later
160 * HW revision:
161 * DB8500ed has revision 0
162 * DB8500v1 has revision 2
163 * DB8500v2 has revision 3
164 * AP9540v1 has revision 4
165 * DB8540v1 has revision 4
166 * TODO: Check if all these registers have to be saved/restored on dma40 v4a
167 */
168static u32 d40_backup_regs_v4a[] = {
169 D40_DREG_PSEG1,
170 D40_DREG_PSEG2,
171 D40_DREG_PSEG3,
172 D40_DREG_PSEG4,
173 D40_DREG_PCEG1,
174 D40_DREG_PCEG2,
175 D40_DREG_PCEG3,
176 D40_DREG_PCEG4,
177 D40_DREG_RSEG1,
178 D40_DREG_RSEG2,
179 D40_DREG_RSEG3,
180 D40_DREG_RSEG4,
181 D40_DREG_RCEG1,
182 D40_DREG_RCEG2,
183 D40_DREG_RCEG3,
184 D40_DREG_RCEG4,
185};
186
187#define BACKUP_REGS_SZ_V4A ARRAY_SIZE(d40_backup_regs_v4a)
188
189static u32 d40_backup_regs_v4b[] = {
190 D40_DREG_CPSEG1,
191 D40_DREG_CPSEG2,
192 D40_DREG_CPSEG3,
193 D40_DREG_CPSEG4,
194 D40_DREG_CPSEG5,
195 D40_DREG_CPCEG1,
196 D40_DREG_CPCEG2,
197 D40_DREG_CPCEG3,
198 D40_DREG_CPCEG4,
199 D40_DREG_CPCEG5,
200 D40_DREG_CRSEG1,
201 D40_DREG_CRSEG2,
202 D40_DREG_CRSEG3,
203 D40_DREG_CRSEG4,
204 D40_DREG_CRSEG5,
205 D40_DREG_CRCEG1,
206 D40_DREG_CRCEG2,
207 D40_DREG_CRCEG3,
208 D40_DREG_CRCEG4,
209 D40_DREG_CRCEG5,
210};
211
212#define BACKUP_REGS_SZ_V4B ARRAY_SIZE(d40_backup_regs_v4b)
213
214static __maybe_unused u32 d40_backup_regs_chan[] = {
215 D40_CHAN_REG_SSCFG,
216 D40_CHAN_REG_SSELT,
217 D40_CHAN_REG_SSPTR,
218 D40_CHAN_REG_SSLNK,
219 D40_CHAN_REG_SDCFG,
220 D40_CHAN_REG_SDELT,
221 D40_CHAN_REG_SDPTR,
222 D40_CHAN_REG_SDLNK,
223};
224
225#define BACKUP_REGS_SZ_MAX ((BACKUP_REGS_SZ_V4A > BACKUP_REGS_SZ_V4B) ? \
226 BACKUP_REGS_SZ_V4A : BACKUP_REGS_SZ_V4B)
227
228/**
229 * struct d40_interrupt_lookup - lookup table for interrupt handler
230 *
231 * @src: Interrupt mask register.
232 * @clr: Interrupt clear register.
233 * @is_error: true if this is an error interrupt.
234 * @offset: start delta in the lookup_log_chans in d40_base. If equals to
235 * D40_PHY_CHAN, the lookup_phy_chans shall be used instead.
236 */
237struct d40_interrupt_lookup {
238 u32 src;
239 u32 clr;
240 bool is_error;
241 int offset;
242};
243
244
245static struct d40_interrupt_lookup il_v4a[] = {
246 {D40_DREG_LCTIS0, D40_DREG_LCICR0, false, 0},
247 {D40_DREG_LCTIS1, D40_DREG_LCICR1, false, 32},
248 {D40_DREG_LCTIS2, D40_DREG_LCICR2, false, 64},
249 {D40_DREG_LCTIS3, D40_DREG_LCICR3, false, 96},
250 {D40_DREG_LCEIS0, D40_DREG_LCICR0, true, 0},
251 {D40_DREG_LCEIS1, D40_DREG_LCICR1, true, 32},
252 {D40_DREG_LCEIS2, D40_DREG_LCICR2, true, 64},
253 {D40_DREG_LCEIS3, D40_DREG_LCICR3, true, 96},
254 {D40_DREG_PCTIS, D40_DREG_PCICR, false, D40_PHY_CHAN},
255 {D40_DREG_PCEIS, D40_DREG_PCICR, true, D40_PHY_CHAN},
256};
257
258static struct d40_interrupt_lookup il_v4b[] = {
259 {D40_DREG_CLCTIS1, D40_DREG_CLCICR1, false, 0},
260 {D40_DREG_CLCTIS2, D40_DREG_CLCICR2, false, 32},
261 {D40_DREG_CLCTIS3, D40_DREG_CLCICR3, false, 64},
262 {D40_DREG_CLCTIS4, D40_DREG_CLCICR4, false, 96},
263 {D40_DREG_CLCTIS5, D40_DREG_CLCICR5, false, 128},
264 {D40_DREG_CLCEIS1, D40_DREG_CLCICR1, true, 0},
265 {D40_DREG_CLCEIS2, D40_DREG_CLCICR2, true, 32},
266 {D40_DREG_CLCEIS3, D40_DREG_CLCICR3, true, 64},
267 {D40_DREG_CLCEIS4, D40_DREG_CLCICR4, true, 96},
268 {D40_DREG_CLCEIS5, D40_DREG_CLCICR5, true, 128},
269 {D40_DREG_CPCTIS, D40_DREG_CPCICR, false, D40_PHY_CHAN},
270 {D40_DREG_CPCEIS, D40_DREG_CPCICR, true, D40_PHY_CHAN},
271};
272
273/**
274 * struct d40_reg_val - simple lookup struct
275 *
276 * @reg: The register.
277 * @val: The value that belongs to the register in reg.
278 */
279struct d40_reg_val {
280 unsigned int reg;
281 unsigned int val;
282};
283
284static __initdata struct d40_reg_val dma_init_reg_v4a[] = {
285 /* Clock every part of the DMA block from start */
286 { .reg = D40_DREG_GCC, .val = D40_DREG_GCC_ENABLE_ALL},
287
288 /* Interrupts on all logical channels */
289 { .reg = D40_DREG_LCMIS0, .val = 0xFFFFFFFF},
290 { .reg = D40_DREG_LCMIS1, .val = 0xFFFFFFFF},
291 { .reg = D40_DREG_LCMIS2, .val = 0xFFFFFFFF},
292 { .reg = D40_DREG_LCMIS3, .val = 0xFFFFFFFF},
293 { .reg = D40_DREG_LCICR0, .val = 0xFFFFFFFF},
294 { .reg = D40_DREG_LCICR1, .val = 0xFFFFFFFF},
295 { .reg = D40_DREG_LCICR2, .val = 0xFFFFFFFF},
296 { .reg = D40_DREG_LCICR3, .val = 0xFFFFFFFF},
297 { .reg = D40_DREG_LCTIS0, .val = 0xFFFFFFFF},
298 { .reg = D40_DREG_LCTIS1, .val = 0xFFFFFFFF},
299 { .reg = D40_DREG_LCTIS2, .val = 0xFFFFFFFF},
300 { .reg = D40_DREG_LCTIS3, .val = 0xFFFFFFFF}
301};
302static __initdata struct d40_reg_val dma_init_reg_v4b[] = {
303 /* Clock every part of the DMA block from start */
304 { .reg = D40_DREG_GCC, .val = D40_DREG_GCC_ENABLE_ALL},
305
306 /* Interrupts on all logical channels */
307 { .reg = D40_DREG_CLCMIS1, .val = 0xFFFFFFFF},
308 { .reg = D40_DREG_CLCMIS2, .val = 0xFFFFFFFF},
309 { .reg = D40_DREG_CLCMIS3, .val = 0xFFFFFFFF},
310 { .reg = D40_DREG_CLCMIS4, .val = 0xFFFFFFFF},
311 { .reg = D40_DREG_CLCMIS5, .val = 0xFFFFFFFF},
312 { .reg = D40_DREG_CLCICR1, .val = 0xFFFFFFFF},
313 { .reg = D40_DREG_CLCICR2, .val = 0xFFFFFFFF},
314 { .reg = D40_DREG_CLCICR3, .val = 0xFFFFFFFF},
315 { .reg = D40_DREG_CLCICR4, .val = 0xFFFFFFFF},
316 { .reg = D40_DREG_CLCICR5, .val = 0xFFFFFFFF},
317 { .reg = D40_DREG_CLCTIS1, .val = 0xFFFFFFFF},
318 { .reg = D40_DREG_CLCTIS2, .val = 0xFFFFFFFF},
319 { .reg = D40_DREG_CLCTIS3, .val = 0xFFFFFFFF},
320 { .reg = D40_DREG_CLCTIS4, .val = 0xFFFFFFFF},
321 { .reg = D40_DREG_CLCTIS5, .val = 0xFFFFFFFF}
322};
323
324/**
325 * struct d40_lli_pool - Structure for keeping LLIs in memory
326 *
327 * @base: Pointer to memory area when the pre_alloc_lli's are not large
328 * enough, IE bigger than the most common case, 1 dst and 1 src. NULL if
329 * pre_alloc_lli is used.
330 * @dma_addr: DMA address, if mapped
331 * @size: The size in bytes of the memory at base or the size of pre_alloc_lli.
332 * @pre_alloc_lli: Pre allocated area for the most common case of transfers,
333 * one buffer to one buffer.
334 */
335struct d40_lli_pool {
336 void *base;
337 int size;
338 dma_addr_t dma_addr;
339 /* Space for dst and src, plus an extra for padding */
340 u8 pre_alloc_lli[3 * sizeof(struct d40_phy_lli)];
341};
342
343/**
344 * struct d40_desc - A descriptor is one DMA job.
345 *
346 * @lli_phy: LLI settings for physical channel. Both src and dst=
347 * points into the lli_pool, to base if lli_len > 1 or to pre_alloc_lli if
348 * lli_len equals one.
349 * @lli_log: Same as above but for logical channels.
350 * @lli_pool: The pool with two entries pre-allocated.
351 * @lli_len: Number of llis of current descriptor.
352 * @lli_current: Number of transferred llis.
353 * @lcla_alloc: Number of LCLA entries allocated.
354 * @txd: DMA engine struct. Used for among other things for communication
355 * during a transfer.
356 * @node: List entry.
357 * @is_in_client_list: true if the client owns this descriptor.
358 * @cyclic: true if this is a cyclic job
359 *
360 * This descriptor is used for both logical and physical transfers.
361 */
362struct d40_desc {
363 /* LLI physical */
364 struct d40_phy_lli_bidir lli_phy;
365 /* LLI logical */
366 struct d40_log_lli_bidir lli_log;
367
368 struct d40_lli_pool lli_pool;
369 int lli_len;
370 int lli_current;
371 int lcla_alloc;
372
373 struct dma_async_tx_descriptor txd;
374 struct list_head node;
375
376 bool is_in_client_list;
377 bool cyclic;
378};
379
380/**
381 * struct d40_lcla_pool - LCLA pool settings and data.
382 *
383 * @base: The virtual address of LCLA. 18 bit aligned.
384 * @dma_addr: DMA address, if mapped
385 * @base_unaligned: The orignal kmalloc pointer, if kmalloc is used.
386 * This pointer is only there for clean-up on error.
387 * @pages: The number of pages needed for all physical channels.
388 * Only used later for clean-up on error
389 * @lock: Lock to protect the content in this struct.
390 * @alloc_map: big map over which LCLA entry is own by which job.
391 */
392struct d40_lcla_pool {
393 void *base;
394 dma_addr_t dma_addr;
395 void *base_unaligned;
396 int pages;
397 spinlock_t lock;
398 struct d40_desc **alloc_map;
399};
400
401/**
402 * struct d40_phy_res - struct for handling eventlines mapped to physical
403 * channels.
404 *
405 * @lock: A lock protection this entity.
406 * @reserved: True if used by secure world or otherwise.
407 * @num: The physical channel number of this entity.
408 * @allocated_src: Bit mapped to show which src event line's are mapped to
409 * this physical channel. Can also be free or physically allocated.
410 * @allocated_dst: Same as for src but is dst.
411 * allocated_dst and allocated_src uses the D40_ALLOC* defines as well as
412 * event line number.
413 * @use_soft_lli: To mark if the linked lists of channel are managed by SW.
414 */
415struct d40_phy_res {
416 spinlock_t lock;
417 bool reserved;
418 int num;
419 u32 allocated_src;
420 u32 allocated_dst;
421 bool use_soft_lli;
422};
423
424struct d40_base;
425
426/**
427 * struct d40_chan - Struct that describes a channel.
428 *
429 * @lock: A spinlock to protect this struct.
430 * @log_num: The logical number, if any of this channel.
431 * @pending_tx: The number of pending transfers. Used between interrupt handler
432 * and tasklet.
433 * @busy: Set to true when transfer is ongoing on this channel.
434 * @phy_chan: Pointer to physical channel which this instance runs on. If this
435 * point is NULL, then the channel is not allocated.
436 * @chan: DMA engine handle.
437 * @tasklet: Tasklet that gets scheduled from interrupt context to complete a
438 * transfer and call client callback.
439 * @client: Cliented owned descriptor list.
440 * @pending_queue: Submitted jobs, to be issued by issue_pending()
441 * @active: Active descriptor.
442 * @done: Completed jobs
443 * @queue: Queued jobs.
444 * @prepare_queue: Prepared jobs.
445 * @dma_cfg: The client configuration of this dma channel.
446 * @slave_config: DMA slave configuration.
447 * @configured: whether the dma_cfg configuration is valid
448 * @base: Pointer to the device instance struct.
449 * @src_def_cfg: Default cfg register setting for src.
450 * @dst_def_cfg: Default cfg register setting for dst.
451 * @log_def: Default logical channel settings.
452 * @lcpa: Pointer to dst and src lcpa settings.
453 * @runtime_addr: runtime configured address.
454 * @runtime_direction: runtime configured direction.
455 *
456 * This struct can either "be" a logical or a physical channel.
457 */
458struct d40_chan {
459 spinlock_t lock;
460 int log_num;
461 int pending_tx;
462 bool busy;
463 struct d40_phy_res *phy_chan;
464 struct dma_chan chan;
465 struct tasklet_struct tasklet;
466 struct list_head client;
467 struct list_head pending_queue;
468 struct list_head active;
469 struct list_head done;
470 struct list_head queue;
471 struct list_head prepare_queue;
472 struct stedma40_chan_cfg dma_cfg;
473 struct dma_slave_config slave_config;
474 bool configured;
475 struct d40_base *base;
476 /* Default register configurations */
477 u32 src_def_cfg;
478 u32 dst_def_cfg;
479 struct d40_def_lcsp log_def;
480 struct d40_log_lli_full *lcpa;
481 /* Runtime reconfiguration */
482 dma_addr_t runtime_addr;
483 enum dma_transfer_direction runtime_direction;
484};
485
486/**
487 * struct d40_gen_dmac - generic values to represent u8500/u8540 DMA
488 * controller
489 *
490 * @backup: the pointer to the registers address array for backup
491 * @backup_size: the size of the registers address array for backup
492 * @realtime_en: the realtime enable register
493 * @realtime_clear: the realtime clear register
494 * @high_prio_en: the high priority enable register
495 * @high_prio_clear: the high priority clear register
496 * @interrupt_en: the interrupt enable register
497 * @interrupt_clear: the interrupt clear register
498 * @il: the pointer to struct d40_interrupt_lookup
499 * @il_size: the size of d40_interrupt_lookup array
500 * @init_reg: the pointer to the struct d40_reg_val
501 * @init_reg_size: the size of d40_reg_val array
502 */
503struct d40_gen_dmac {
504 u32 *backup;
505 u32 backup_size;
506 u32 realtime_en;
507 u32 realtime_clear;
508 u32 high_prio_en;
509 u32 high_prio_clear;
510 u32 interrupt_en;
511 u32 interrupt_clear;
512 struct d40_interrupt_lookup *il;
513 u32 il_size;
514 struct d40_reg_val *init_reg;
515 u32 init_reg_size;
516};
517
518/**
519 * struct d40_base - The big global struct, one for each probe'd instance.
520 *
521 * @interrupt_lock: Lock used to make sure one interrupt is handle a time.
522 * @execmd_lock: Lock for execute command usage since several channels share
523 * the same physical register.
524 * @dev: The device structure.
525 * @virtbase: The virtual base address of the DMA's register.
526 * @rev: silicon revision detected.
527 * @clk: Pointer to the DMA clock structure.
528 * @phy_start: Physical memory start of the DMA registers.
529 * @phy_size: Size of the DMA register map.
530 * @irq: The IRQ number.
531 * @num_memcpy_chans: The number of channels used for memcpy (mem-to-mem
532 * transfers).
533 * @num_phy_chans: The number of physical channels. Read from HW. This
534 * is the number of available channels for this driver, not counting "Secure
535 * mode" allocated physical channels.
536 * @num_log_chans: The number of logical channels. Calculated from
537 * num_phy_chans.
538 * @dma_parms: DMA parameters for the channel
539 * @dma_both: dma_device channels that can do both memcpy and slave transfers.
540 * @dma_slave: dma_device channels that can do only do slave transfers.
541 * @dma_memcpy: dma_device channels that can do only do memcpy transfers.
542 * @phy_chans: Room for all possible physical channels in system.
543 * @log_chans: Room for all possible logical channels in system.
544 * @lookup_log_chans: Used to map interrupt number to logical channel. Points
545 * to log_chans entries.
546 * @lookup_phy_chans: Used to map interrupt number to physical channel. Points
547 * to phy_chans entries.
548 * @plat_data: Pointer to provided platform_data which is the driver
549 * configuration.
550 * @lcpa_regulator: Pointer to hold the regulator for the esram bank for lcla.
551 * @phy_res: Vector containing all physical channels.
552 * @lcla_pool: lcla pool settings and data.
553 * @lcpa_base: The virtual mapped address of LCPA.
554 * @phy_lcpa: The physical address of the LCPA.
555 * @lcpa_size: The size of the LCPA area.
556 * @desc_slab: cache for descriptors.
557 * @reg_val_backup: Here the values of some hardware registers are stored
558 * before the DMA is powered off. They are restored when the power is back on.
559 * @reg_val_backup_v4: Backup of registers that only exits on dma40 v3 and
560 * later
561 * @reg_val_backup_chan: Backup data for standard channel parameter registers.
562 * @regs_interrupt: Scratch space for registers during interrupt.
563 * @gcc_pwr_off_mask: Mask to maintain the channels that can be turned off.
564 * @gen_dmac: the struct for generic registers values to represent u8500/8540
565 * DMA controller
566 */
567struct d40_base {
568 spinlock_t interrupt_lock;
569 spinlock_t execmd_lock;
570 struct device *dev;
571 void __iomem *virtbase;
572 u8 rev:4;
573 struct clk *clk;
574 phys_addr_t phy_start;
575 resource_size_t phy_size;
576 int irq;
577 int num_memcpy_chans;
578 int num_phy_chans;
579 int num_log_chans;
580 struct device_dma_parameters dma_parms;
581 struct dma_device dma_both;
582 struct dma_device dma_slave;
583 struct dma_device dma_memcpy;
584 struct d40_chan *phy_chans;
585 struct d40_chan *log_chans;
586 struct d40_chan **lookup_log_chans;
587 struct d40_chan **lookup_phy_chans;
588 struct stedma40_platform_data *plat_data;
589 struct regulator *lcpa_regulator;
590 /* Physical half channels */
591 struct d40_phy_res *phy_res;
592 struct d40_lcla_pool lcla_pool;
593 void *lcpa_base;
594 dma_addr_t phy_lcpa;
595 resource_size_t lcpa_size;
596 struct kmem_cache *desc_slab;
597 u32 reg_val_backup[BACKUP_REGS_SZ];
598 u32 reg_val_backup_v4[BACKUP_REGS_SZ_MAX];
599 u32 *reg_val_backup_chan;
600 u32 *regs_interrupt;
601 u16 gcc_pwr_off_mask;
602 struct d40_gen_dmac gen_dmac;
603};
604
605static struct device *chan2dev(struct d40_chan *d40c)
606{
607 return &d40c->chan.dev->device;
608}
609
610static bool chan_is_physical(struct d40_chan *chan)
611{
612 return chan->log_num == D40_PHY_CHAN;
613}
614
615static bool chan_is_logical(struct d40_chan *chan)
616{
617 return !chan_is_physical(chan);
618}
619
620static void __iomem *chan_base(struct d40_chan *chan)
621{
622 return chan->base->virtbase + D40_DREG_PCBASE +
623 chan->phy_chan->num * D40_DREG_PCDELTA;
624}
625
626#define d40_err(dev, format, arg...) \
627 dev_err(dev, "[%s] " format, __func__, ## arg)
628
629#define chan_err(d40c, format, arg...) \
630 d40_err(chan2dev(d40c), format, ## arg)
631
632static int d40_set_runtime_config_write(struct dma_chan *chan,
633 struct dma_slave_config *config,
634 enum dma_transfer_direction direction);
635
636static int d40_pool_lli_alloc(struct d40_chan *d40c, struct d40_desc *d40d,
637 int lli_len)
638{
639 bool is_log = chan_is_logical(d40c);
640 u32 align;
641 void *base;
642
643 if (is_log)
644 align = sizeof(struct d40_log_lli);
645 else
646 align = sizeof(struct d40_phy_lli);
647
648 if (lli_len == 1) {
649 base = d40d->lli_pool.pre_alloc_lli;
650 d40d->lli_pool.size = sizeof(d40d->lli_pool.pre_alloc_lli);
651 d40d->lli_pool.base = NULL;
652 } else {
653 d40d->lli_pool.size = lli_len * 2 * align;
654
655 base = kmalloc(d40d->lli_pool.size + align, GFP_NOWAIT);
656 d40d->lli_pool.base = base;
657
658 if (d40d->lli_pool.base == NULL)
659 return -ENOMEM;
660 }
661
662 if (is_log) {
663 d40d->lli_log.src = PTR_ALIGN(base, align);
664 d40d->lli_log.dst = d40d->lli_log.src + lli_len;
665
666 d40d->lli_pool.dma_addr = 0;
667 } else {
668 d40d->lli_phy.src = PTR_ALIGN(base, align);
669 d40d->lli_phy.dst = d40d->lli_phy.src + lli_len;
670
671 d40d->lli_pool.dma_addr = dma_map_single(d40c->base->dev,
672 d40d->lli_phy.src,
673 d40d->lli_pool.size,
674 DMA_TO_DEVICE);
675
676 if (dma_mapping_error(d40c->base->dev,
677 d40d->lli_pool.dma_addr)) {
678 kfree(d40d->lli_pool.base);
679 d40d->lli_pool.base = NULL;
680 d40d->lli_pool.dma_addr = 0;
681 return -ENOMEM;
682 }
683 }
684
685 return 0;
686}
687
688static void d40_pool_lli_free(struct d40_chan *d40c, struct d40_desc *d40d)
689{
690 if (d40d->lli_pool.dma_addr)
691 dma_unmap_single(d40c->base->dev, d40d->lli_pool.dma_addr,
692 d40d->lli_pool.size, DMA_TO_DEVICE);
693
694 kfree(d40d->lli_pool.base);
695 d40d->lli_pool.base = NULL;
696 d40d->lli_pool.size = 0;
697 d40d->lli_log.src = NULL;
698 d40d->lli_log.dst = NULL;
699 d40d->lli_phy.src = NULL;
700 d40d->lli_phy.dst = NULL;
701}
702
703static int d40_lcla_alloc_one(struct d40_chan *d40c,
704 struct d40_desc *d40d)
705{
706 unsigned long flags;
707 int i;
708 int ret = -EINVAL;
709
710 spin_lock_irqsave(&d40c->base->lcla_pool.lock, flags);
711
712 /*
713 * Allocate both src and dst at the same time, therefore the half
714 * start on 1 since 0 can't be used since zero is used as end marker.
715 */
716 for (i = 1 ; i < D40_LCLA_LINK_PER_EVENT_GRP / 2; i++) {
717 int idx = d40c->phy_chan->num * D40_LCLA_LINK_PER_EVENT_GRP + i;
718
719 if (!d40c->base->lcla_pool.alloc_map[idx]) {
720 d40c->base->lcla_pool.alloc_map[idx] = d40d;
721 d40d->lcla_alloc++;
722 ret = i;
723 break;
724 }
725 }
726
727 spin_unlock_irqrestore(&d40c->base->lcla_pool.lock, flags);
728
729 return ret;
730}
731
732static int d40_lcla_free_all(struct d40_chan *d40c,
733 struct d40_desc *d40d)
734{
735 unsigned long flags;
736 int i;
737 int ret = -EINVAL;
738
739 if (chan_is_physical(d40c))
740 return 0;
741
742 spin_lock_irqsave(&d40c->base->lcla_pool.lock, flags);
743
744 for (i = 1 ; i < D40_LCLA_LINK_PER_EVENT_GRP / 2; i++) {
745 int idx = d40c->phy_chan->num * D40_LCLA_LINK_PER_EVENT_GRP + i;
746
747 if (d40c->base->lcla_pool.alloc_map[idx] == d40d) {
748 d40c->base->lcla_pool.alloc_map[idx] = NULL;
749 d40d->lcla_alloc--;
750 if (d40d->lcla_alloc == 0) {
751 ret = 0;
752 break;
753 }
754 }
755 }
756
757 spin_unlock_irqrestore(&d40c->base->lcla_pool.lock, flags);
758
759 return ret;
760
761}
762
763static void d40_desc_remove(struct d40_desc *d40d)
764{
765 list_del(&d40d->node);
766}
767
768static struct d40_desc *d40_desc_get(struct d40_chan *d40c)
769{
770 struct d40_desc *desc = NULL;
771
772 if (!list_empty(&d40c->client)) {
773 struct d40_desc *d;
774 struct d40_desc *_d;
775
776 list_for_each_entry_safe(d, _d, &d40c->client, node) {
777 if (async_tx_test_ack(&d->txd)) {
778 d40_desc_remove(d);
779 desc = d;
780 memset(desc, 0, sizeof(*desc));
781 break;
782 }
783 }
784 }
785
786 if (!desc)
787 desc = kmem_cache_zalloc(d40c->base->desc_slab, GFP_NOWAIT);
788
789 if (desc)
790 INIT_LIST_HEAD(&desc->node);
791
792 return desc;
793}
794
795static void d40_desc_free(struct d40_chan *d40c, struct d40_desc *d40d)
796{
797
798 d40_pool_lli_free(d40c, d40d);
799 d40_lcla_free_all(d40c, d40d);
800 kmem_cache_free(d40c->base->desc_slab, d40d);
801}
802
803static void d40_desc_submit(struct d40_chan *d40c, struct d40_desc *desc)
804{
805 list_add_tail(&desc->node, &d40c->active);
806}
807
808static void d40_phy_lli_load(struct d40_chan *chan, struct d40_desc *desc)
809{
810 struct d40_phy_lli *lli_dst = desc->lli_phy.dst;
811 struct d40_phy_lli *lli_src = desc->lli_phy.src;
812 void __iomem *base = chan_base(chan);
813
814 writel(lli_src->reg_cfg, base + D40_CHAN_REG_SSCFG);
815 writel(lli_src->reg_elt, base + D40_CHAN_REG_SSELT);
816 writel(lli_src->reg_ptr, base + D40_CHAN_REG_SSPTR);
817 writel(lli_src->reg_lnk, base + D40_CHAN_REG_SSLNK);
818
819 writel(lli_dst->reg_cfg, base + D40_CHAN_REG_SDCFG);
820 writel(lli_dst->reg_elt, base + D40_CHAN_REG_SDELT);
821 writel(lli_dst->reg_ptr, base + D40_CHAN_REG_SDPTR);
822 writel(lli_dst->reg_lnk, base + D40_CHAN_REG_SDLNK);
823}
824
825static void d40_desc_done(struct d40_chan *d40c, struct d40_desc *desc)
826{
827 list_add_tail(&desc->node, &d40c->done);
828}
829
830static void d40_log_lli_to_lcxa(struct d40_chan *chan, struct d40_desc *desc)
831{
832 struct d40_lcla_pool *pool = &chan->base->lcla_pool;
833 struct d40_log_lli_bidir *lli = &desc->lli_log;
834 int lli_current = desc->lli_current;
835 int lli_len = desc->lli_len;
836 bool cyclic = desc->cyclic;
837 int curr_lcla = -EINVAL;
838 int first_lcla = 0;
839 bool use_esram_lcla = chan->base->plat_data->use_esram_lcla;
840 bool linkback;
841
842 /*
843 * We may have partially running cyclic transfers, in case we did't get
844 * enough LCLA entries.
845 */
846 linkback = cyclic && lli_current == 0;
847
848 /*
849 * For linkback, we need one LCLA even with only one link, because we
850 * can't link back to the one in LCPA space
851 */
852 if (linkback || (lli_len - lli_current > 1)) {
853 /*
854 * If the channel is expected to use only soft_lli don't
855 * allocate a lcla. This is to avoid a HW issue that exists
856 * in some controller during a peripheral to memory transfer
857 * that uses linked lists.
858 */
859 if (!(chan->phy_chan->use_soft_lli &&
860 chan->dma_cfg.dir == DMA_DEV_TO_MEM))
861 curr_lcla = d40_lcla_alloc_one(chan, desc);
862
863 first_lcla = curr_lcla;
864 }
865
866 /*
867 * For linkback, we normally load the LCPA in the loop since we need to
868 * link it to the second LCLA and not the first. However, if we
869 * couldn't even get a first LCLA, then we have to run in LCPA and
870 * reload manually.
871 */
872 if (!linkback || curr_lcla == -EINVAL) {
873 unsigned int flags = 0;
874
875 if (curr_lcla == -EINVAL)
876 flags |= LLI_TERM_INT;
877
878 d40_log_lli_lcpa_write(chan->lcpa,
879 &lli->dst[lli_current],
880 &lli->src[lli_current],
881 curr_lcla,
882 flags);
883 lli_current++;
884 }
885
886 if (curr_lcla < 0)
887 goto set_current;
888
889 for (; lli_current < lli_len; lli_current++) {
890 unsigned int lcla_offset = chan->phy_chan->num * 1024 +
891 8 * curr_lcla * 2;
892 struct d40_log_lli *lcla = pool->base + lcla_offset;
893 unsigned int flags = 0;
894 int next_lcla;
895
896 if (lli_current + 1 < lli_len)
897 next_lcla = d40_lcla_alloc_one(chan, desc);
898 else
899 next_lcla = linkback ? first_lcla : -EINVAL;
900
901 if (cyclic || next_lcla == -EINVAL)
902 flags |= LLI_TERM_INT;
903
904 if (linkback && curr_lcla == first_lcla) {
905 /* First link goes in both LCPA and LCLA */
906 d40_log_lli_lcpa_write(chan->lcpa,
907 &lli->dst[lli_current],
908 &lli->src[lli_current],
909 next_lcla, flags);
910 }
911
912 /*
913 * One unused LCLA in the cyclic case if the very first
914 * next_lcla fails...
915 */
916 d40_log_lli_lcla_write(lcla,
917 &lli->dst[lli_current],
918 &lli->src[lli_current],
919 next_lcla, flags);
920
921 /*
922 * Cache maintenance is not needed if lcla is
923 * mapped in esram
924 */
925 if (!use_esram_lcla) {
926 dma_sync_single_range_for_device(chan->base->dev,
927 pool->dma_addr, lcla_offset,
928 2 * sizeof(struct d40_log_lli),
929 DMA_TO_DEVICE);
930 }
931 curr_lcla = next_lcla;
932
933 if (curr_lcla == -EINVAL || curr_lcla == first_lcla) {
934 lli_current++;
935 break;
936 }
937 }
938 set_current:
939 desc->lli_current = lli_current;
940}
941
942static void d40_desc_load(struct d40_chan *d40c, struct d40_desc *d40d)
943{
944 if (chan_is_physical(d40c)) {
945 d40_phy_lli_load(d40c, d40d);
946 d40d->lli_current = d40d->lli_len;
947 } else
948 d40_log_lli_to_lcxa(d40c, d40d);
949}
950
951static struct d40_desc *d40_first_active_get(struct d40_chan *d40c)
952{
953 return list_first_entry_or_null(&d40c->active, struct d40_desc, node);
954}
955
956/* remove desc from current queue and add it to the pending_queue */
957static void d40_desc_queue(struct d40_chan *d40c, struct d40_desc *desc)
958{
959 d40_desc_remove(desc);
960 desc->is_in_client_list = false;
961 list_add_tail(&desc->node, &d40c->pending_queue);
962}
963
964static struct d40_desc *d40_first_pending(struct d40_chan *d40c)
965{
966 return list_first_entry_or_null(&d40c->pending_queue, struct d40_desc,
967 node);
968}
969
970static struct d40_desc *d40_first_queued(struct d40_chan *d40c)
971{
972 return list_first_entry_or_null(&d40c->queue, struct d40_desc, node);
973}
974
975static struct d40_desc *d40_first_done(struct d40_chan *d40c)
976{
977 return list_first_entry_or_null(&d40c->done, struct d40_desc, node);
978}
979
980static int d40_psize_2_burst_size(bool is_log, int psize)
981{
982 if (is_log) {
983 if (psize == STEDMA40_PSIZE_LOG_1)
984 return 1;
985 } else {
986 if (psize == STEDMA40_PSIZE_PHY_1)
987 return 1;
988 }
989
990 return 2 << psize;
991}
992
993/*
994 * The dma only supports transmitting packages up to
995 * STEDMA40_MAX_SEG_SIZE * data_width, where data_width is stored in Bytes.
996 *
997 * Calculate the total number of dma elements required to send the entire sg list.
998 */
999static int d40_size_2_dmalen(int size, u32 data_width1, u32 data_width2)
1000{
1001 int dmalen;
1002 u32 max_w = max(data_width1, data_width2);
1003 u32 min_w = min(data_width1, data_width2);
1004 u32 seg_max = ALIGN(STEDMA40_MAX_SEG_SIZE * min_w, max_w);
1005
1006 if (seg_max > STEDMA40_MAX_SEG_SIZE)
1007 seg_max -= max_w;
1008
1009 if (!IS_ALIGNED(size, max_w))
1010 return -EINVAL;
1011
1012 if (size <= seg_max)
1013 dmalen = 1;
1014 else {
1015 dmalen = size / seg_max;
1016 if (dmalen * seg_max < size)
1017 dmalen++;
1018 }
1019 return dmalen;
1020}
1021
1022static int d40_sg_2_dmalen(struct scatterlist *sgl, int sg_len,
1023 u32 data_width1, u32 data_width2)
1024{
1025 struct scatterlist *sg;
1026 int i;
1027 int len = 0;
1028 int ret;
1029
1030 for_each_sg(sgl, sg, sg_len, i) {
1031 ret = d40_size_2_dmalen(sg_dma_len(sg),
1032 data_width1, data_width2);
1033 if (ret < 0)
1034 return ret;
1035 len += ret;
1036 }
1037 return len;
1038}
1039
1040static int __d40_execute_command_phy(struct d40_chan *d40c,
1041 enum d40_command command)
1042{
1043 u32 status;
1044 int i;
1045 void __iomem *active_reg;
1046 int ret = 0;
1047 unsigned long flags;
1048 u32 wmask;
1049
1050 if (command == D40_DMA_STOP) {
1051 ret = __d40_execute_command_phy(d40c, D40_DMA_SUSPEND_REQ);
1052 if (ret)
1053 return ret;
1054 }
1055
1056 spin_lock_irqsave(&d40c->base->execmd_lock, flags);
1057
1058 if (d40c->phy_chan->num % 2 == 0)
1059 active_reg = d40c->base->virtbase + D40_DREG_ACTIVE;
1060 else
1061 active_reg = d40c->base->virtbase + D40_DREG_ACTIVO;
1062
1063 if (command == D40_DMA_SUSPEND_REQ) {
1064 status = (readl(active_reg) &
1065 D40_CHAN_POS_MASK(d40c->phy_chan->num)) >>
1066 D40_CHAN_POS(d40c->phy_chan->num);
1067
1068 if (status == D40_DMA_SUSPENDED || status == D40_DMA_STOP)
1069 goto unlock;
1070 }
1071
1072 wmask = 0xffffffff & ~(D40_CHAN_POS_MASK(d40c->phy_chan->num));
1073 writel(wmask | (command << D40_CHAN_POS(d40c->phy_chan->num)),
1074 active_reg);
1075
1076 if (command == D40_DMA_SUSPEND_REQ) {
1077
1078 for (i = 0 ; i < D40_SUSPEND_MAX_IT; i++) {
1079 status = (readl(active_reg) &
1080 D40_CHAN_POS_MASK(d40c->phy_chan->num)) >>
1081 D40_CHAN_POS(d40c->phy_chan->num);
1082
1083 cpu_relax();
1084 /*
1085 * Reduce the number of bus accesses while
1086 * waiting for the DMA to suspend.
1087 */
1088 udelay(3);
1089
1090 if (status == D40_DMA_STOP ||
1091 status == D40_DMA_SUSPENDED)
1092 break;
1093 }
1094
1095 if (i == D40_SUSPEND_MAX_IT) {
1096 chan_err(d40c,
1097 "unable to suspend the chl %d (log: %d) status %x\n",
1098 d40c->phy_chan->num, d40c->log_num,
1099 status);
1100 dump_stack();
1101 ret = -EBUSY;
1102 }
1103
1104 }
1105 unlock:
1106 spin_unlock_irqrestore(&d40c->base->execmd_lock, flags);
1107 return ret;
1108}
1109
1110static void d40_term_all(struct d40_chan *d40c)
1111{
1112 struct d40_desc *d40d;
1113 struct d40_desc *_d;
1114
1115 /* Release completed descriptors */
1116 while ((d40d = d40_first_done(d40c))) {
1117 d40_desc_remove(d40d);
1118 d40_desc_free(d40c, d40d);
1119 }
1120
1121 /* Release active descriptors */
1122 while ((d40d = d40_first_active_get(d40c))) {
1123 d40_desc_remove(d40d);
1124 d40_desc_free(d40c, d40d);
1125 }
1126
1127 /* Release queued descriptors waiting for transfer */
1128 while ((d40d = d40_first_queued(d40c))) {
1129 d40_desc_remove(d40d);
1130 d40_desc_free(d40c, d40d);
1131 }
1132
1133 /* Release pending descriptors */
1134 while ((d40d = d40_first_pending(d40c))) {
1135 d40_desc_remove(d40d);
1136 d40_desc_free(d40c, d40d);
1137 }
1138
1139 /* Release client owned descriptors */
1140 if (!list_empty(&d40c->client))
1141 list_for_each_entry_safe(d40d, _d, &d40c->client, node) {
1142 d40_desc_remove(d40d);
1143 d40_desc_free(d40c, d40d);
1144 }
1145
1146 /* Release descriptors in prepare queue */
1147 if (!list_empty(&d40c->prepare_queue))
1148 list_for_each_entry_safe(d40d, _d,
1149 &d40c->prepare_queue, node) {
1150 d40_desc_remove(d40d);
1151 d40_desc_free(d40c, d40d);
1152 }
1153
1154 d40c->pending_tx = 0;
1155}
1156
1157static void __d40_config_set_event(struct d40_chan *d40c,
1158 enum d40_events event_type, u32 event,
1159 int reg)
1160{
1161 void __iomem *addr = chan_base(d40c) + reg;
1162 int tries;
1163 u32 status;
1164
1165 switch (event_type) {
1166
1167 case D40_DEACTIVATE_EVENTLINE:
1168
1169 writel((D40_DEACTIVATE_EVENTLINE << D40_EVENTLINE_POS(event))
1170 | ~D40_EVENTLINE_MASK(event), addr);
1171 break;
1172
1173 case D40_SUSPEND_REQ_EVENTLINE:
1174 status = (readl(addr) & D40_EVENTLINE_MASK(event)) >>
1175 D40_EVENTLINE_POS(event);
1176
1177 if (status == D40_DEACTIVATE_EVENTLINE ||
1178 status == D40_SUSPEND_REQ_EVENTLINE)
1179 break;
1180
1181 writel((D40_SUSPEND_REQ_EVENTLINE << D40_EVENTLINE_POS(event))
1182 | ~D40_EVENTLINE_MASK(event), addr);
1183
1184 for (tries = 0 ; tries < D40_SUSPEND_MAX_IT; tries++) {
1185
1186 status = (readl(addr) & D40_EVENTLINE_MASK(event)) >>
1187 D40_EVENTLINE_POS(event);
1188
1189 cpu_relax();
1190 /*
1191 * Reduce the number of bus accesses while
1192 * waiting for the DMA to suspend.
1193 */
1194 udelay(3);
1195
1196 if (status == D40_DEACTIVATE_EVENTLINE)
1197 break;
1198 }
1199
1200 if (tries == D40_SUSPEND_MAX_IT) {
1201 chan_err(d40c,
1202 "unable to stop the event_line chl %d (log: %d)"
1203 "status %x\n", d40c->phy_chan->num,
1204 d40c->log_num, status);
1205 }
1206 break;
1207
1208 case D40_ACTIVATE_EVENTLINE:
1209 /*
1210 * The hardware sometimes doesn't register the enable when src and dst
1211 * event lines are active on the same logical channel. Retry to ensure
1212 * it does. Usually only one retry is sufficient.
1213 */
1214 tries = 100;
1215 while (--tries) {
1216 writel((D40_ACTIVATE_EVENTLINE <<
1217 D40_EVENTLINE_POS(event)) |
1218 ~D40_EVENTLINE_MASK(event), addr);
1219
1220 if (readl(addr) & D40_EVENTLINE_MASK(event))
1221 break;
1222 }
1223
1224 if (tries != 99)
1225 dev_dbg(chan2dev(d40c),
1226 "[%s] workaround enable S%cLNK (%d tries)\n",
1227 __func__, reg == D40_CHAN_REG_SSLNK ? 'S' : 'D',
1228 100 - tries);
1229
1230 WARN_ON(!tries);
1231 break;
1232
1233 case D40_ROUND_EVENTLINE:
1234 BUG();
1235 break;
1236
1237 }
1238}
1239
1240static void d40_config_set_event(struct d40_chan *d40c,
1241 enum d40_events event_type)
1242{
1243 u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dev_type);
1244
1245 /* Enable event line connected to device (or memcpy) */
1246 if ((d40c->dma_cfg.dir == DMA_DEV_TO_MEM) ||
1247 (d40c->dma_cfg.dir == DMA_DEV_TO_DEV))
1248 __d40_config_set_event(d40c, event_type, event,
1249 D40_CHAN_REG_SSLNK);
1250
1251 if (d40c->dma_cfg.dir != DMA_DEV_TO_MEM)
1252 __d40_config_set_event(d40c, event_type, event,
1253 D40_CHAN_REG_SDLNK);
1254}
1255
1256static u32 d40_chan_has_events(struct d40_chan *d40c)
1257{
1258 void __iomem *chanbase = chan_base(d40c);
1259 u32 val;
1260
1261 val = readl(chanbase + D40_CHAN_REG_SSLNK);
1262 val |= readl(chanbase + D40_CHAN_REG_SDLNK);
1263
1264 return val;
1265}
1266
1267static int
1268__d40_execute_command_log(struct d40_chan *d40c, enum d40_command command)
1269{
1270 unsigned long flags;
1271 int ret = 0;
1272 u32 active_status;
1273 void __iomem *active_reg;
1274
1275 if (d40c->phy_chan->num % 2 == 0)
1276 active_reg = d40c->base->virtbase + D40_DREG_ACTIVE;
1277 else
1278 active_reg = d40c->base->virtbase + D40_DREG_ACTIVO;
1279
1280
1281 spin_lock_irqsave(&d40c->phy_chan->lock, flags);
1282
1283 switch (command) {
1284 case D40_DMA_STOP:
1285 case D40_DMA_SUSPEND_REQ:
1286
1287 active_status = (readl(active_reg) &
1288 D40_CHAN_POS_MASK(d40c->phy_chan->num)) >>
1289 D40_CHAN_POS(d40c->phy_chan->num);
1290
1291 if (active_status == D40_DMA_RUN)
1292 d40_config_set_event(d40c, D40_SUSPEND_REQ_EVENTLINE);
1293 else
1294 d40_config_set_event(d40c, D40_DEACTIVATE_EVENTLINE);
1295
1296 if (!d40_chan_has_events(d40c) && (command == D40_DMA_STOP))
1297 ret = __d40_execute_command_phy(d40c, command);
1298
1299 break;
1300
1301 case D40_DMA_RUN:
1302
1303 d40_config_set_event(d40c, D40_ACTIVATE_EVENTLINE);
1304 ret = __d40_execute_command_phy(d40c, command);
1305 break;
1306
1307 case D40_DMA_SUSPENDED:
1308 BUG();
1309 break;
1310 }
1311
1312 spin_unlock_irqrestore(&d40c->phy_chan->lock, flags);
1313 return ret;
1314}
1315
1316static int d40_channel_execute_command(struct d40_chan *d40c,
1317 enum d40_command command)
1318{
1319 if (chan_is_logical(d40c))
1320 return __d40_execute_command_log(d40c, command);
1321 else
1322 return __d40_execute_command_phy(d40c, command);
1323}
1324
1325static u32 d40_get_prmo(struct d40_chan *d40c)
1326{
1327 static const unsigned int phy_map[] = {
1328 [STEDMA40_PCHAN_BASIC_MODE]
1329 = D40_DREG_PRMO_PCHAN_BASIC,
1330 [STEDMA40_PCHAN_MODULO_MODE]
1331 = D40_DREG_PRMO_PCHAN_MODULO,
1332 [STEDMA40_PCHAN_DOUBLE_DST_MODE]
1333 = D40_DREG_PRMO_PCHAN_DOUBLE_DST,
1334 };
1335 static const unsigned int log_map[] = {
1336 [STEDMA40_LCHAN_SRC_PHY_DST_LOG]
1337 = D40_DREG_PRMO_LCHAN_SRC_PHY_DST_LOG,
1338 [STEDMA40_LCHAN_SRC_LOG_DST_PHY]
1339 = D40_DREG_PRMO_LCHAN_SRC_LOG_DST_PHY,
1340 [STEDMA40_LCHAN_SRC_LOG_DST_LOG]
1341 = D40_DREG_PRMO_LCHAN_SRC_LOG_DST_LOG,
1342 };
1343
1344 if (chan_is_physical(d40c))
1345 return phy_map[d40c->dma_cfg.mode_opt];
1346 else
1347 return log_map[d40c->dma_cfg.mode_opt];
1348}
1349
1350static void d40_config_write(struct d40_chan *d40c)
1351{
1352 u32 addr_base;
1353 u32 var;
1354
1355 /* Odd addresses are even addresses + 4 */
1356 addr_base = (d40c->phy_chan->num % 2) * 4;
1357 /* Setup channel mode to logical or physical */
1358 var = ((u32)(chan_is_logical(d40c)) + 1) <<
1359 D40_CHAN_POS(d40c->phy_chan->num);
1360 writel(var, d40c->base->virtbase + D40_DREG_PRMSE + addr_base);
1361
1362 /* Setup operational mode option register */
1363 var = d40_get_prmo(d40c) << D40_CHAN_POS(d40c->phy_chan->num);
1364
1365 writel(var, d40c->base->virtbase + D40_DREG_PRMOE + addr_base);
1366
1367 if (chan_is_logical(d40c)) {
1368 int lidx = (d40c->phy_chan->num << D40_SREG_ELEM_LOG_LIDX_POS)
1369 & D40_SREG_ELEM_LOG_LIDX_MASK;
1370 void __iomem *chanbase = chan_base(d40c);
1371
1372 /* Set default config for CFG reg */
1373 writel(d40c->src_def_cfg, chanbase + D40_CHAN_REG_SSCFG);
1374 writel(d40c->dst_def_cfg, chanbase + D40_CHAN_REG_SDCFG);
1375
1376 /* Set LIDX for lcla */
1377 writel(lidx, chanbase + D40_CHAN_REG_SSELT);
1378 writel(lidx, chanbase + D40_CHAN_REG_SDELT);
1379
1380 /* Clear LNK which will be used by d40_chan_has_events() */
1381 writel(0, chanbase + D40_CHAN_REG_SSLNK);
1382 writel(0, chanbase + D40_CHAN_REG_SDLNK);
1383 }
1384}
1385
1386static u32 d40_residue(struct d40_chan *d40c)
1387{
1388 u32 num_elt;
1389
1390 if (chan_is_logical(d40c))
1391 num_elt = (readl(&d40c->lcpa->lcsp2) & D40_MEM_LCSP2_ECNT_MASK)
1392 >> D40_MEM_LCSP2_ECNT_POS;
1393 else {
1394 u32 val = readl(chan_base(d40c) + D40_CHAN_REG_SDELT);
1395 num_elt = (val & D40_SREG_ELEM_PHY_ECNT_MASK)
1396 >> D40_SREG_ELEM_PHY_ECNT_POS;
1397 }
1398
1399 return num_elt * d40c->dma_cfg.dst_info.data_width;
1400}
1401
1402static bool d40_tx_is_linked(struct d40_chan *d40c)
1403{
1404 bool is_link;
1405
1406 if (chan_is_logical(d40c))
1407 is_link = readl(&d40c->lcpa->lcsp3) & D40_MEM_LCSP3_DLOS_MASK;
1408 else
1409 is_link = readl(chan_base(d40c) + D40_CHAN_REG_SDLNK)
1410 & D40_SREG_LNK_PHYS_LNK_MASK;
1411
1412 return is_link;
1413}
1414
1415static int d40_pause(struct dma_chan *chan)
1416{
1417 struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
1418 int res = 0;
1419 unsigned long flags;
1420
1421 if (d40c->phy_chan == NULL) {
1422 chan_err(d40c, "Channel is not allocated!\n");
1423 return -EINVAL;
1424 }
1425
1426 if (!d40c->busy)
1427 return 0;
1428
1429 spin_lock_irqsave(&d40c->lock, flags);
1430 pm_runtime_get_sync(d40c->base->dev);
1431
1432 res = d40_channel_execute_command(d40c, D40_DMA_SUSPEND_REQ);
1433
1434 pm_runtime_mark_last_busy(d40c->base->dev);
1435 pm_runtime_put_autosuspend(d40c->base->dev);
1436 spin_unlock_irqrestore(&d40c->lock, flags);
1437 return res;
1438}
1439
1440static int d40_resume(struct dma_chan *chan)
1441{
1442 struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
1443 int res = 0;
1444 unsigned long flags;
1445
1446 if (d40c->phy_chan == NULL) {
1447 chan_err(d40c, "Channel is not allocated!\n");
1448 return -EINVAL;
1449 }
1450
1451 if (!d40c->busy)
1452 return 0;
1453
1454 spin_lock_irqsave(&d40c->lock, flags);
1455 pm_runtime_get_sync(d40c->base->dev);
1456
1457 /* If bytes left to transfer or linked tx resume job */
1458 if (d40_residue(d40c) || d40_tx_is_linked(d40c))
1459 res = d40_channel_execute_command(d40c, D40_DMA_RUN);
1460
1461 pm_runtime_mark_last_busy(d40c->base->dev);
1462 pm_runtime_put_autosuspend(d40c->base->dev);
1463 spin_unlock_irqrestore(&d40c->lock, flags);
1464 return res;
1465}
1466
1467static dma_cookie_t d40_tx_submit(struct dma_async_tx_descriptor *tx)
1468{
1469 struct d40_chan *d40c = container_of(tx->chan,
1470 struct d40_chan,
1471 chan);
1472 struct d40_desc *d40d = container_of(tx, struct d40_desc, txd);
1473 unsigned long flags;
1474 dma_cookie_t cookie;
1475
1476 spin_lock_irqsave(&d40c->lock, flags);
1477 cookie = dma_cookie_assign(tx);
1478 d40_desc_queue(d40c, d40d);
1479 spin_unlock_irqrestore(&d40c->lock, flags);
1480
1481 return cookie;
1482}
1483
1484static int d40_start(struct d40_chan *d40c)
1485{
1486 return d40_channel_execute_command(d40c, D40_DMA_RUN);
1487}
1488
1489static struct d40_desc *d40_queue_start(struct d40_chan *d40c)
1490{
1491 struct d40_desc *d40d;
1492 int err;
1493
1494 /* Start queued jobs, if any */
1495 d40d = d40_first_queued(d40c);
1496
1497 if (d40d != NULL) {
1498 if (!d40c->busy) {
1499 d40c->busy = true;
1500 pm_runtime_get_sync(d40c->base->dev);
1501 }
1502
1503 /* Remove from queue */
1504 d40_desc_remove(d40d);
1505
1506 /* Add to active queue */
1507 d40_desc_submit(d40c, d40d);
1508
1509 /* Initiate DMA job */
1510 d40_desc_load(d40c, d40d);
1511
1512 /* Start dma job */
1513 err = d40_start(d40c);
1514
1515 if (err)
1516 return NULL;
1517 }
1518
1519 return d40d;
1520}
1521
1522/* called from interrupt context */
1523static void dma_tc_handle(struct d40_chan *d40c)
1524{
1525 struct d40_desc *d40d;
1526
1527 /* Get first active entry from list */
1528 d40d = d40_first_active_get(d40c);
1529
1530 if (d40d == NULL)
1531 return;
1532
1533 if (d40d->cyclic) {
1534 /*
1535 * If this was a paritially loaded list, we need to reloaded
1536 * it, and only when the list is completed. We need to check
1537 * for done because the interrupt will hit for every link, and
1538 * not just the last one.
1539 */
1540 if (d40d->lli_current < d40d->lli_len
1541 && !d40_tx_is_linked(d40c)
1542 && !d40_residue(d40c)) {
1543 d40_lcla_free_all(d40c, d40d);
1544 d40_desc_load(d40c, d40d);
1545 (void) d40_start(d40c);
1546
1547 if (d40d->lli_current == d40d->lli_len)
1548 d40d->lli_current = 0;
1549 }
1550 } else {
1551 d40_lcla_free_all(d40c, d40d);
1552
1553 if (d40d->lli_current < d40d->lli_len) {
1554 d40_desc_load(d40c, d40d);
1555 /* Start dma job */
1556 (void) d40_start(d40c);
1557 return;
1558 }
1559
1560 if (d40_queue_start(d40c) == NULL) {
1561 d40c->busy = false;
1562
1563 pm_runtime_mark_last_busy(d40c->base->dev);
1564 pm_runtime_put_autosuspend(d40c->base->dev);
1565 }
1566
1567 d40_desc_remove(d40d);
1568 d40_desc_done(d40c, d40d);
1569 }
1570
1571 d40c->pending_tx++;
1572 tasklet_schedule(&d40c->tasklet);
1573
1574}
1575
1576static void dma_tasklet(unsigned long data)
1577{
1578 struct d40_chan *d40c = (struct d40_chan *) data;
1579 struct d40_desc *d40d;
1580 unsigned long flags;
1581 bool callback_active;
1582 struct dmaengine_desc_callback cb;
1583
1584 spin_lock_irqsave(&d40c->lock, flags);
1585
1586 /* Get first entry from the done list */
1587 d40d = d40_first_done(d40c);
1588 if (d40d == NULL) {
1589 /* Check if we have reached here for cyclic job */
1590 d40d = d40_first_active_get(d40c);
1591 if (d40d == NULL || !d40d->cyclic)
1592 goto check_pending_tx;
1593 }
1594
1595 if (!d40d->cyclic)
1596 dma_cookie_complete(&d40d->txd);
1597
1598 /*
1599 * If terminating a channel pending_tx is set to zero.
1600 * This prevents any finished active jobs to return to the client.
1601 */
1602 if (d40c->pending_tx == 0) {
1603 spin_unlock_irqrestore(&d40c->lock, flags);
1604 return;
1605 }
1606
1607 /* Callback to client */
1608 callback_active = !!(d40d->txd.flags & DMA_PREP_INTERRUPT);
1609 dmaengine_desc_get_callback(&d40d->txd, &cb);
1610
1611 if (!d40d->cyclic) {
1612 if (async_tx_test_ack(&d40d->txd)) {
1613 d40_desc_remove(d40d);
1614 d40_desc_free(d40c, d40d);
1615 } else if (!d40d->is_in_client_list) {
1616 d40_desc_remove(d40d);
1617 d40_lcla_free_all(d40c, d40d);
1618 list_add_tail(&d40d->node, &d40c->client);
1619 d40d->is_in_client_list = true;
1620 }
1621 }
1622
1623 d40c->pending_tx--;
1624
1625 if (d40c->pending_tx)
1626 tasklet_schedule(&d40c->tasklet);
1627
1628 spin_unlock_irqrestore(&d40c->lock, flags);
1629
1630 if (callback_active)
1631 dmaengine_desc_callback_invoke(&cb, NULL);
1632
1633 return;
1634 check_pending_tx:
1635 /* Rescue manouver if receiving double interrupts */
1636 if (d40c->pending_tx > 0)
1637 d40c->pending_tx--;
1638 spin_unlock_irqrestore(&d40c->lock, flags);
1639}
1640
1641static irqreturn_t d40_handle_interrupt(int irq, void *data)
1642{
1643 int i;
1644 u32 idx;
1645 u32 row;
1646 long chan = -1;
1647 struct d40_chan *d40c;
1648 unsigned long flags;
1649 struct d40_base *base = data;
1650 u32 *regs = base->regs_interrupt;
1651 struct d40_interrupt_lookup *il = base->gen_dmac.il;
1652 u32 il_size = base->gen_dmac.il_size;
1653
1654 spin_lock_irqsave(&base->interrupt_lock, flags);
1655
1656 /* Read interrupt status of both logical and physical channels */
1657 for (i = 0; i < il_size; i++)
1658 regs[i] = readl(base->virtbase + il[i].src);
1659
1660 for (;;) {
1661
1662 chan = find_next_bit((unsigned long *)regs,
1663 BITS_PER_LONG * il_size, chan + 1);
1664
1665 /* No more set bits found? */
1666 if (chan == BITS_PER_LONG * il_size)
1667 break;
1668
1669 row = chan / BITS_PER_LONG;
1670 idx = chan & (BITS_PER_LONG - 1);
1671
1672 if (il[row].offset == D40_PHY_CHAN)
1673 d40c = base->lookup_phy_chans[idx];
1674 else
1675 d40c = base->lookup_log_chans[il[row].offset + idx];
1676
1677 if (!d40c) {
1678 /*
1679 * No error because this can happen if something else
1680 * in the system is using the channel.
1681 */
1682 continue;
1683 }
1684
1685 /* ACK interrupt */
1686 writel(BIT(idx), base->virtbase + il[row].clr);
1687
1688 spin_lock(&d40c->lock);
1689
1690 if (!il[row].is_error)
1691 dma_tc_handle(d40c);
1692 else
1693 d40_err(base->dev, "IRQ chan: %ld offset %d idx %d\n",
1694 chan, il[row].offset, idx);
1695
1696 spin_unlock(&d40c->lock);
1697 }
1698
1699 spin_unlock_irqrestore(&base->interrupt_lock, flags);
1700
1701 return IRQ_HANDLED;
1702}
1703
1704static int d40_validate_conf(struct d40_chan *d40c,
1705 struct stedma40_chan_cfg *conf)
1706{
1707 int res = 0;
1708 bool is_log = conf->mode == STEDMA40_MODE_LOGICAL;
1709
1710 if (!conf->dir) {
1711 chan_err(d40c, "Invalid direction.\n");
1712 res = -EINVAL;
1713 }
1714
1715 if ((is_log && conf->dev_type > d40c->base->num_log_chans) ||
1716 (!is_log && conf->dev_type > d40c->base->num_phy_chans) ||
1717 (conf->dev_type < 0)) {
1718 chan_err(d40c, "Invalid device type (%d)\n", conf->dev_type);
1719 res = -EINVAL;
1720 }
1721
1722 if (conf->dir == DMA_DEV_TO_DEV) {
1723 /*
1724 * DMAC HW supports it. Will be added to this driver,
1725 * in case any dma client requires it.
1726 */
1727 chan_err(d40c, "periph to periph not supported\n");
1728 res = -EINVAL;
1729 }
1730
1731 if (d40_psize_2_burst_size(is_log, conf->src_info.psize) *
1732 conf->src_info.data_width !=
1733 d40_psize_2_burst_size(is_log, conf->dst_info.psize) *
1734 conf->dst_info.data_width) {
1735 /*
1736 * The DMAC hardware only supports
1737 * src (burst x width) == dst (burst x width)
1738 */
1739
1740 chan_err(d40c, "src (burst x width) != dst (burst x width)\n");
1741 res = -EINVAL;
1742 }
1743
1744 return res;
1745}
1746
1747static bool d40_alloc_mask_set(struct d40_phy_res *phy,
1748 bool is_src, int log_event_line, bool is_log,
1749 bool *first_user)
1750{
1751 unsigned long flags;
1752 spin_lock_irqsave(&phy->lock, flags);
1753
1754 *first_user = ((phy->allocated_src | phy->allocated_dst)
1755 == D40_ALLOC_FREE);
1756
1757 if (!is_log) {
1758 /* Physical interrupts are masked per physical full channel */
1759 if (phy->allocated_src == D40_ALLOC_FREE &&
1760 phy->allocated_dst == D40_ALLOC_FREE) {
1761 phy->allocated_dst = D40_ALLOC_PHY;
1762 phy->allocated_src = D40_ALLOC_PHY;
1763 goto found_unlock;
1764 } else
1765 goto not_found_unlock;
1766 }
1767
1768 /* Logical channel */
1769 if (is_src) {
1770 if (phy->allocated_src == D40_ALLOC_PHY)
1771 goto not_found_unlock;
1772
1773 if (phy->allocated_src == D40_ALLOC_FREE)
1774 phy->allocated_src = D40_ALLOC_LOG_FREE;
1775
1776 if (!(phy->allocated_src & BIT(log_event_line))) {
1777 phy->allocated_src |= BIT(log_event_line);
1778 goto found_unlock;
1779 } else
1780 goto not_found_unlock;
1781 } else {
1782 if (phy->allocated_dst == D40_ALLOC_PHY)
1783 goto not_found_unlock;
1784
1785 if (phy->allocated_dst == D40_ALLOC_FREE)
1786 phy->allocated_dst = D40_ALLOC_LOG_FREE;
1787
1788 if (!(phy->allocated_dst & BIT(log_event_line))) {
1789 phy->allocated_dst |= BIT(log_event_line);
1790 goto found_unlock;
1791 }
1792 }
1793 not_found_unlock:
1794 spin_unlock_irqrestore(&phy->lock, flags);
1795 return false;
1796 found_unlock:
1797 spin_unlock_irqrestore(&phy->lock, flags);
1798 return true;
1799}
1800
1801static bool d40_alloc_mask_free(struct d40_phy_res *phy, bool is_src,
1802 int log_event_line)
1803{
1804 unsigned long flags;
1805 bool is_free = false;
1806
1807 spin_lock_irqsave(&phy->lock, flags);
1808 if (!log_event_line) {
1809 phy->allocated_dst = D40_ALLOC_FREE;
1810 phy->allocated_src = D40_ALLOC_FREE;
1811 is_free = true;
1812 goto unlock;
1813 }
1814
1815 /* Logical channel */
1816 if (is_src) {
1817 phy->allocated_src &= ~BIT(log_event_line);
1818 if (phy->allocated_src == D40_ALLOC_LOG_FREE)
1819 phy->allocated_src = D40_ALLOC_FREE;
1820 } else {
1821 phy->allocated_dst &= ~BIT(log_event_line);
1822 if (phy->allocated_dst == D40_ALLOC_LOG_FREE)
1823 phy->allocated_dst = D40_ALLOC_FREE;
1824 }
1825
1826 is_free = ((phy->allocated_src | phy->allocated_dst) ==
1827 D40_ALLOC_FREE);
1828 unlock:
1829 spin_unlock_irqrestore(&phy->lock, flags);
1830
1831 return is_free;
1832}
1833
1834static int d40_allocate_channel(struct d40_chan *d40c, bool *first_phy_user)
1835{
1836 int dev_type = d40c->dma_cfg.dev_type;
1837 int event_group;
1838 int event_line;
1839 struct d40_phy_res *phys;
1840 int i;
1841 int j;
1842 int log_num;
1843 int num_phy_chans;
1844 bool is_src;
1845 bool is_log = d40c->dma_cfg.mode == STEDMA40_MODE_LOGICAL;
1846
1847 phys = d40c->base->phy_res;
1848 num_phy_chans = d40c->base->num_phy_chans;
1849
1850 if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM) {
1851 log_num = 2 * dev_type;
1852 is_src = true;
1853 } else if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV ||
1854 d40c->dma_cfg.dir == DMA_MEM_TO_MEM) {
1855 /* dst event lines are used for logical memcpy */
1856 log_num = 2 * dev_type + 1;
1857 is_src = false;
1858 } else
1859 return -EINVAL;
1860
1861 event_group = D40_TYPE_TO_GROUP(dev_type);
1862 event_line = D40_TYPE_TO_EVENT(dev_type);
1863
1864 if (!is_log) {
1865 if (d40c->dma_cfg.dir == DMA_MEM_TO_MEM) {
1866 /* Find physical half channel */
1867 if (d40c->dma_cfg.use_fixed_channel) {
1868 i = d40c->dma_cfg.phy_channel;
1869 if (d40_alloc_mask_set(&phys[i], is_src,
1870 0, is_log,
1871 first_phy_user))
1872 goto found_phy;
1873 } else {
1874 for (i = 0; i < num_phy_chans; i++) {
1875 if (d40_alloc_mask_set(&phys[i], is_src,
1876 0, is_log,
1877 first_phy_user))
1878 goto found_phy;
1879 }
1880 }
1881 } else
1882 for (j = 0; j < d40c->base->num_phy_chans; j += 8) {
1883 int phy_num = j + event_group * 2;
1884 for (i = phy_num; i < phy_num + 2; i++) {
1885 if (d40_alloc_mask_set(&phys[i],
1886 is_src,
1887 0,
1888 is_log,
1889 first_phy_user))
1890 goto found_phy;
1891 }
1892 }
1893 return -EINVAL;
1894found_phy:
1895 d40c->phy_chan = &phys[i];
1896 d40c->log_num = D40_PHY_CHAN;
1897 goto out;
1898 }
1899 if (dev_type == -1)
1900 return -EINVAL;
1901
1902 /* Find logical channel */
1903 for (j = 0; j < d40c->base->num_phy_chans; j += 8) {
1904 int phy_num = j + event_group * 2;
1905
1906 if (d40c->dma_cfg.use_fixed_channel) {
1907 i = d40c->dma_cfg.phy_channel;
1908
1909 if ((i != phy_num) && (i != phy_num + 1)) {
1910 dev_err(chan2dev(d40c),
1911 "invalid fixed phy channel %d\n", i);
1912 return -EINVAL;
1913 }
1914
1915 if (d40_alloc_mask_set(&phys[i], is_src, event_line,
1916 is_log, first_phy_user))
1917 goto found_log;
1918
1919 dev_err(chan2dev(d40c),
1920 "could not allocate fixed phy channel %d\n", i);
1921 return -EINVAL;
1922 }
1923
1924 /*
1925 * Spread logical channels across all available physical rather
1926 * than pack every logical channel at the first available phy
1927 * channels.
1928 */
1929 if (is_src) {
1930 for (i = phy_num; i < phy_num + 2; i++) {
1931 if (d40_alloc_mask_set(&phys[i], is_src,
1932 event_line, is_log,
1933 first_phy_user))
1934 goto found_log;
1935 }
1936 } else {
1937 for (i = phy_num + 1; i >= phy_num; i--) {
1938 if (d40_alloc_mask_set(&phys[i], is_src,
1939 event_line, is_log,
1940 first_phy_user))
1941 goto found_log;
1942 }
1943 }
1944 }
1945 return -EINVAL;
1946
1947found_log:
1948 d40c->phy_chan = &phys[i];
1949 d40c->log_num = log_num;
1950out:
1951
1952 if (is_log)
1953 d40c->base->lookup_log_chans[d40c->log_num] = d40c;
1954 else
1955 d40c->base->lookup_phy_chans[d40c->phy_chan->num] = d40c;
1956
1957 return 0;
1958
1959}
1960
1961static int d40_config_memcpy(struct d40_chan *d40c)
1962{
1963 dma_cap_mask_t cap = d40c->chan.device->cap_mask;
1964
1965 if (dma_has_cap(DMA_MEMCPY, cap) && !dma_has_cap(DMA_SLAVE, cap)) {
1966 d40c->dma_cfg = dma40_memcpy_conf_log;
1967 d40c->dma_cfg.dev_type = dma40_memcpy_channels[d40c->chan.chan_id];
1968
1969 d40_log_cfg(&d40c->dma_cfg,
1970 &d40c->log_def.lcsp1, &d40c->log_def.lcsp3);
1971
1972 } else if (dma_has_cap(DMA_MEMCPY, cap) &&
1973 dma_has_cap(DMA_SLAVE, cap)) {
1974 d40c->dma_cfg = dma40_memcpy_conf_phy;
1975
1976 /* Generate interrrupt at end of transfer or relink. */
1977 d40c->dst_def_cfg |= BIT(D40_SREG_CFG_TIM_POS);
1978
1979 /* Generate interrupt on error. */
1980 d40c->src_def_cfg |= BIT(D40_SREG_CFG_EIM_POS);
1981 d40c->dst_def_cfg |= BIT(D40_SREG_CFG_EIM_POS);
1982
1983 } else {
1984 chan_err(d40c, "No memcpy\n");
1985 return -EINVAL;
1986 }
1987
1988 return 0;
1989}
1990
1991static int d40_free_dma(struct d40_chan *d40c)
1992{
1993
1994 int res = 0;
1995 u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dev_type);
1996 struct d40_phy_res *phy = d40c->phy_chan;
1997 bool is_src;
1998
1999 /* Terminate all queued and active transfers */
2000 d40_term_all(d40c);
2001
2002 if (phy == NULL) {
2003 chan_err(d40c, "phy == null\n");
2004 return -EINVAL;
2005 }
2006
2007 if (phy->allocated_src == D40_ALLOC_FREE &&
2008 phy->allocated_dst == D40_ALLOC_FREE) {
2009 chan_err(d40c, "channel already free\n");
2010 return -EINVAL;
2011 }
2012
2013 if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV ||
2014 d40c->dma_cfg.dir == DMA_MEM_TO_MEM)
2015 is_src = false;
2016 else if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM)
2017 is_src = true;
2018 else {
2019 chan_err(d40c, "Unknown direction\n");
2020 return -EINVAL;
2021 }
2022
2023 pm_runtime_get_sync(d40c->base->dev);
2024 res = d40_channel_execute_command(d40c, D40_DMA_STOP);
2025 if (res) {
2026 chan_err(d40c, "stop failed\n");
2027 goto mark_last_busy;
2028 }
2029
2030 d40_alloc_mask_free(phy, is_src, chan_is_logical(d40c) ? event : 0);
2031
2032 if (chan_is_logical(d40c))
2033 d40c->base->lookup_log_chans[d40c->log_num] = NULL;
2034 else
2035 d40c->base->lookup_phy_chans[phy->num] = NULL;
2036
2037 if (d40c->busy) {
2038 pm_runtime_mark_last_busy(d40c->base->dev);
2039 pm_runtime_put_autosuspend(d40c->base->dev);
2040 }
2041
2042 d40c->busy = false;
2043 d40c->phy_chan = NULL;
2044 d40c->configured = false;
2045 mark_last_busy:
2046 pm_runtime_mark_last_busy(d40c->base->dev);
2047 pm_runtime_put_autosuspend(d40c->base->dev);
2048 return res;
2049}
2050
2051static bool d40_is_paused(struct d40_chan *d40c)
2052{
2053 void __iomem *chanbase = chan_base(d40c);
2054 bool is_paused = false;
2055 unsigned long flags;
2056 void __iomem *active_reg;
2057 u32 status;
2058 u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dev_type);
2059
2060 spin_lock_irqsave(&d40c->lock, flags);
2061
2062 if (chan_is_physical(d40c)) {
2063 if (d40c->phy_chan->num % 2 == 0)
2064 active_reg = d40c->base->virtbase + D40_DREG_ACTIVE;
2065 else
2066 active_reg = d40c->base->virtbase + D40_DREG_ACTIVO;
2067
2068 status = (readl(active_reg) &
2069 D40_CHAN_POS_MASK(d40c->phy_chan->num)) >>
2070 D40_CHAN_POS(d40c->phy_chan->num);
2071 if (status == D40_DMA_SUSPENDED || status == D40_DMA_STOP)
2072 is_paused = true;
2073 goto unlock;
2074 }
2075
2076 if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV ||
2077 d40c->dma_cfg.dir == DMA_MEM_TO_MEM) {
2078 status = readl(chanbase + D40_CHAN_REG_SDLNK);
2079 } else if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM) {
2080 status = readl(chanbase + D40_CHAN_REG_SSLNK);
2081 } else {
2082 chan_err(d40c, "Unknown direction\n");
2083 goto unlock;
2084 }
2085
2086 status = (status & D40_EVENTLINE_MASK(event)) >>
2087 D40_EVENTLINE_POS(event);
2088
2089 if (status != D40_DMA_RUN)
2090 is_paused = true;
2091 unlock:
2092 spin_unlock_irqrestore(&d40c->lock, flags);
2093 return is_paused;
2094
2095}
2096
2097static u32 stedma40_residue(struct dma_chan *chan)
2098{
2099 struct d40_chan *d40c =
2100 container_of(chan, struct d40_chan, chan);
2101 u32 bytes_left;
2102 unsigned long flags;
2103
2104 spin_lock_irqsave(&d40c->lock, flags);
2105 bytes_left = d40_residue(d40c);
2106 spin_unlock_irqrestore(&d40c->lock, flags);
2107
2108 return bytes_left;
2109}
2110
2111static int
2112d40_prep_sg_log(struct d40_chan *chan, struct d40_desc *desc,
2113 struct scatterlist *sg_src, struct scatterlist *sg_dst,
2114 unsigned int sg_len, dma_addr_t src_dev_addr,
2115 dma_addr_t dst_dev_addr)
2116{
2117 struct stedma40_chan_cfg *cfg = &chan->dma_cfg;
2118 struct stedma40_half_channel_info *src_info = &cfg->src_info;
2119 struct stedma40_half_channel_info *dst_info = &cfg->dst_info;
2120 int ret;
2121
2122 ret = d40_log_sg_to_lli(sg_src, sg_len,
2123 src_dev_addr,
2124 desc->lli_log.src,
2125 chan->log_def.lcsp1,
2126 src_info->data_width,
2127 dst_info->data_width);
2128
2129 ret = d40_log_sg_to_lli(sg_dst, sg_len,
2130 dst_dev_addr,
2131 desc->lli_log.dst,
2132 chan->log_def.lcsp3,
2133 dst_info->data_width,
2134 src_info->data_width);
2135
2136 return ret < 0 ? ret : 0;
2137}
2138
2139static int
2140d40_prep_sg_phy(struct d40_chan *chan, struct d40_desc *desc,
2141 struct scatterlist *sg_src, struct scatterlist *sg_dst,
2142 unsigned int sg_len, dma_addr_t src_dev_addr,
2143 dma_addr_t dst_dev_addr)
2144{
2145 struct stedma40_chan_cfg *cfg = &chan->dma_cfg;
2146 struct stedma40_half_channel_info *src_info = &cfg->src_info;
2147 struct stedma40_half_channel_info *dst_info = &cfg->dst_info;
2148 unsigned long flags = 0;
2149 int ret;
2150
2151 if (desc->cyclic)
2152 flags |= LLI_CYCLIC | LLI_TERM_INT;
2153
2154 ret = d40_phy_sg_to_lli(sg_src, sg_len, src_dev_addr,
2155 desc->lli_phy.src,
2156 virt_to_phys(desc->lli_phy.src),
2157 chan->src_def_cfg,
2158 src_info, dst_info, flags);
2159
2160 ret = d40_phy_sg_to_lli(sg_dst, sg_len, dst_dev_addr,
2161 desc->lli_phy.dst,
2162 virt_to_phys(desc->lli_phy.dst),
2163 chan->dst_def_cfg,
2164 dst_info, src_info, flags);
2165
2166 dma_sync_single_for_device(chan->base->dev, desc->lli_pool.dma_addr,
2167 desc->lli_pool.size, DMA_TO_DEVICE);
2168
2169 return ret < 0 ? ret : 0;
2170}
2171
2172static struct d40_desc *
2173d40_prep_desc(struct d40_chan *chan, struct scatterlist *sg,
2174 unsigned int sg_len, unsigned long dma_flags)
2175{
2176 struct stedma40_chan_cfg *cfg;
2177 struct d40_desc *desc;
2178 int ret;
2179
2180 desc = d40_desc_get(chan);
2181 if (!desc)
2182 return NULL;
2183
2184 cfg = &chan->dma_cfg;
2185 desc->lli_len = d40_sg_2_dmalen(sg, sg_len, cfg->src_info.data_width,
2186 cfg->dst_info.data_width);
2187 if (desc->lli_len < 0) {
2188 chan_err(chan, "Unaligned size\n");
2189 goto free_desc;
2190 }
2191
2192 ret = d40_pool_lli_alloc(chan, desc, desc->lli_len);
2193 if (ret < 0) {
2194 chan_err(chan, "Could not allocate lli\n");
2195 goto free_desc;
2196 }
2197
2198 desc->lli_current = 0;
2199 desc->txd.flags = dma_flags;
2200 desc->txd.tx_submit = d40_tx_submit;
2201
2202 dma_async_tx_descriptor_init(&desc->txd, &chan->chan);
2203
2204 return desc;
2205 free_desc:
2206 d40_desc_free(chan, desc);
2207 return NULL;
2208}
2209
2210static struct dma_async_tx_descriptor *
2211d40_prep_sg(struct dma_chan *dchan, struct scatterlist *sg_src,
2212 struct scatterlist *sg_dst, unsigned int sg_len,
2213 enum dma_transfer_direction direction, unsigned long dma_flags)
2214{
2215 struct d40_chan *chan = container_of(dchan, struct d40_chan, chan);
2216 dma_addr_t src_dev_addr;
2217 dma_addr_t dst_dev_addr;
2218 struct d40_desc *desc;
2219 unsigned long flags;
2220 int ret;
2221
2222 if (!chan->phy_chan) {
2223 chan_err(chan, "Cannot prepare unallocated channel\n");
2224 return NULL;
2225 }
2226
2227 d40_set_runtime_config_write(dchan, &chan->slave_config, direction);
2228
2229 spin_lock_irqsave(&chan->lock, flags);
2230
2231 desc = d40_prep_desc(chan, sg_src, sg_len, dma_flags);
2232 if (desc == NULL)
2233 goto unlock;
2234
2235 if (sg_next(&sg_src[sg_len - 1]) == sg_src)
2236 desc->cyclic = true;
2237
2238 src_dev_addr = 0;
2239 dst_dev_addr = 0;
2240 if (direction == DMA_DEV_TO_MEM)
2241 src_dev_addr = chan->runtime_addr;
2242 else if (direction == DMA_MEM_TO_DEV)
2243 dst_dev_addr = chan->runtime_addr;
2244
2245 if (chan_is_logical(chan))
2246 ret = d40_prep_sg_log(chan, desc, sg_src, sg_dst,
2247 sg_len, src_dev_addr, dst_dev_addr);
2248 else
2249 ret = d40_prep_sg_phy(chan, desc, sg_src, sg_dst,
2250 sg_len, src_dev_addr, dst_dev_addr);
2251
2252 if (ret) {
2253 chan_err(chan, "Failed to prepare %s sg job: %d\n",
2254 chan_is_logical(chan) ? "log" : "phy", ret);
2255 goto free_desc;
2256 }
2257
2258 /*
2259 * add descriptor to the prepare queue in order to be able
2260 * to free them later in terminate_all
2261 */
2262 list_add_tail(&desc->node, &chan->prepare_queue);
2263
2264 spin_unlock_irqrestore(&chan->lock, flags);
2265
2266 return &desc->txd;
2267 free_desc:
2268 d40_desc_free(chan, desc);
2269 unlock:
2270 spin_unlock_irqrestore(&chan->lock, flags);
2271 return NULL;
2272}
2273
2274bool stedma40_filter(struct dma_chan *chan, void *data)
2275{
2276 struct stedma40_chan_cfg *info = data;
2277 struct d40_chan *d40c =
2278 container_of(chan, struct d40_chan, chan);
2279 int err;
2280
2281 if (data) {
2282 err = d40_validate_conf(d40c, info);
2283 if (!err)
2284 d40c->dma_cfg = *info;
2285 } else
2286 err = d40_config_memcpy(d40c);
2287
2288 if (!err)
2289 d40c->configured = true;
2290
2291 return err == 0;
2292}
2293EXPORT_SYMBOL(stedma40_filter);
2294
2295static void __d40_set_prio_rt(struct d40_chan *d40c, int dev_type, bool src)
2296{
2297 bool realtime = d40c->dma_cfg.realtime;
2298 bool highprio = d40c->dma_cfg.high_priority;
2299 u32 rtreg;
2300 u32 event = D40_TYPE_TO_EVENT(dev_type);
2301 u32 group = D40_TYPE_TO_GROUP(dev_type);
2302 u32 bit = BIT(event);
2303 u32 prioreg;
2304 struct d40_gen_dmac *dmac = &d40c->base->gen_dmac;
2305
2306 rtreg = realtime ? dmac->realtime_en : dmac->realtime_clear;
2307 /*
2308 * Due to a hardware bug, in some cases a logical channel triggered by
2309 * a high priority destination event line can generate extra packet
2310 * transactions.
2311 *
2312 * The workaround is to not set the high priority level for the
2313 * destination event lines that trigger logical channels.
2314 */
2315 if (!src && chan_is_logical(d40c))
2316 highprio = false;
2317
2318 prioreg = highprio ? dmac->high_prio_en : dmac->high_prio_clear;
2319
2320 /* Destination event lines are stored in the upper halfword */
2321 if (!src)
2322 bit <<= 16;
2323
2324 writel(bit, d40c->base->virtbase + prioreg + group * 4);
2325 writel(bit, d40c->base->virtbase + rtreg + group * 4);
2326}
2327
2328static void d40_set_prio_realtime(struct d40_chan *d40c)
2329{
2330 if (d40c->base->rev < 3)
2331 return;
2332
2333 if ((d40c->dma_cfg.dir == DMA_DEV_TO_MEM) ||
2334 (d40c->dma_cfg.dir == DMA_DEV_TO_DEV))
2335 __d40_set_prio_rt(d40c, d40c->dma_cfg.dev_type, true);
2336
2337 if ((d40c->dma_cfg.dir == DMA_MEM_TO_DEV) ||
2338 (d40c->dma_cfg.dir == DMA_DEV_TO_DEV))
2339 __d40_set_prio_rt(d40c, d40c->dma_cfg.dev_type, false);
2340}
2341
2342#define D40_DT_FLAGS_MODE(flags) ((flags >> 0) & 0x1)
2343#define D40_DT_FLAGS_DIR(flags) ((flags >> 1) & 0x1)
2344#define D40_DT_FLAGS_BIG_ENDIAN(flags) ((flags >> 2) & 0x1)
2345#define D40_DT_FLAGS_FIXED_CHAN(flags) ((flags >> 3) & 0x1)
2346#define D40_DT_FLAGS_HIGH_PRIO(flags) ((flags >> 4) & 0x1)
2347
2348static struct dma_chan *d40_xlate(struct of_phandle_args *dma_spec,
2349 struct of_dma *ofdma)
2350{
2351 struct stedma40_chan_cfg cfg;
2352 dma_cap_mask_t cap;
2353 u32 flags;
2354
2355 memset(&cfg, 0, sizeof(struct stedma40_chan_cfg));
2356
2357 dma_cap_zero(cap);
2358 dma_cap_set(DMA_SLAVE, cap);
2359
2360 cfg.dev_type = dma_spec->args[0];
2361 flags = dma_spec->args[2];
2362
2363 switch (D40_DT_FLAGS_MODE(flags)) {
2364 case 0: cfg.mode = STEDMA40_MODE_LOGICAL; break;
2365 case 1: cfg.mode = STEDMA40_MODE_PHYSICAL; break;
2366 }
2367
2368 switch (D40_DT_FLAGS_DIR(flags)) {
2369 case 0:
2370 cfg.dir = DMA_MEM_TO_DEV;
2371 cfg.dst_info.big_endian = D40_DT_FLAGS_BIG_ENDIAN(flags);
2372 break;
2373 case 1:
2374 cfg.dir = DMA_DEV_TO_MEM;
2375 cfg.src_info.big_endian = D40_DT_FLAGS_BIG_ENDIAN(flags);
2376 break;
2377 }
2378
2379 if (D40_DT_FLAGS_FIXED_CHAN(flags)) {
2380 cfg.phy_channel = dma_spec->args[1];
2381 cfg.use_fixed_channel = true;
2382 }
2383
2384 if (D40_DT_FLAGS_HIGH_PRIO(flags))
2385 cfg.high_priority = true;
2386
2387 return dma_request_channel(cap, stedma40_filter, &cfg);
2388}
2389
2390/* DMA ENGINE functions */
2391static int d40_alloc_chan_resources(struct dma_chan *chan)
2392{
2393 int err;
2394 unsigned long flags;
2395 struct d40_chan *d40c =
2396 container_of(chan, struct d40_chan, chan);
2397 bool is_free_phy;
2398 spin_lock_irqsave(&d40c->lock, flags);
2399
2400 dma_cookie_init(chan);
2401
2402 /* If no dma configuration is set use default configuration (memcpy) */
2403 if (!d40c->configured) {
2404 err = d40_config_memcpy(d40c);
2405 if (err) {
2406 chan_err(d40c, "Failed to configure memcpy channel\n");
2407 goto mark_last_busy;
2408 }
2409 }
2410
2411 err = d40_allocate_channel(d40c, &is_free_phy);
2412 if (err) {
2413 chan_err(d40c, "Failed to allocate channel\n");
2414 d40c->configured = false;
2415 goto mark_last_busy;
2416 }
2417
2418 pm_runtime_get_sync(d40c->base->dev);
2419
2420 d40_set_prio_realtime(d40c);
2421
2422 if (chan_is_logical(d40c)) {
2423 if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM)
2424 d40c->lcpa = d40c->base->lcpa_base +
2425 d40c->dma_cfg.dev_type * D40_LCPA_CHAN_SIZE;
2426 else
2427 d40c->lcpa = d40c->base->lcpa_base +
2428 d40c->dma_cfg.dev_type *
2429 D40_LCPA_CHAN_SIZE + D40_LCPA_CHAN_DST_DELTA;
2430
2431 /* Unmask the Global Interrupt Mask. */
2432 d40c->src_def_cfg |= BIT(D40_SREG_CFG_LOG_GIM_POS);
2433 d40c->dst_def_cfg |= BIT(D40_SREG_CFG_LOG_GIM_POS);
2434 }
2435
2436 dev_dbg(chan2dev(d40c), "allocated %s channel (phy %d%s)\n",
2437 chan_is_logical(d40c) ? "logical" : "physical",
2438 d40c->phy_chan->num,
2439 d40c->dma_cfg.use_fixed_channel ? ", fixed" : "");
2440
2441
2442 /*
2443 * Only write channel configuration to the DMA if the physical
2444 * resource is free. In case of multiple logical channels
2445 * on the same physical resource, only the first write is necessary.
2446 */
2447 if (is_free_phy)
2448 d40_config_write(d40c);
2449 mark_last_busy:
2450 pm_runtime_mark_last_busy(d40c->base->dev);
2451 pm_runtime_put_autosuspend(d40c->base->dev);
2452 spin_unlock_irqrestore(&d40c->lock, flags);
2453 return err;
2454}
2455
2456static void d40_free_chan_resources(struct dma_chan *chan)
2457{
2458 struct d40_chan *d40c =
2459 container_of(chan, struct d40_chan, chan);
2460 int err;
2461 unsigned long flags;
2462
2463 if (d40c->phy_chan == NULL) {
2464 chan_err(d40c, "Cannot free unallocated channel\n");
2465 return;
2466 }
2467
2468 spin_lock_irqsave(&d40c->lock, flags);
2469
2470 err = d40_free_dma(d40c);
2471
2472 if (err)
2473 chan_err(d40c, "Failed to free channel\n");
2474 spin_unlock_irqrestore(&d40c->lock, flags);
2475}
2476
2477static struct dma_async_tx_descriptor *d40_prep_memcpy(struct dma_chan *chan,
2478 dma_addr_t dst,
2479 dma_addr_t src,
2480 size_t size,
2481 unsigned long dma_flags)
2482{
2483 struct scatterlist dst_sg;
2484 struct scatterlist src_sg;
2485
2486 sg_init_table(&dst_sg, 1);
2487 sg_init_table(&src_sg, 1);
2488
2489 sg_dma_address(&dst_sg) = dst;
2490 sg_dma_address(&src_sg) = src;
2491
2492 sg_dma_len(&dst_sg) = size;
2493 sg_dma_len(&src_sg) = size;
2494
2495 return d40_prep_sg(chan, &src_sg, &dst_sg, 1,
2496 DMA_MEM_TO_MEM, dma_flags);
2497}
2498
2499static struct dma_async_tx_descriptor *
2500d40_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
2501 unsigned int sg_len, enum dma_transfer_direction direction,
2502 unsigned long dma_flags, void *context)
2503{
2504 if (!is_slave_direction(direction))
2505 return NULL;
2506
2507 return d40_prep_sg(chan, sgl, sgl, sg_len, direction, dma_flags);
2508}
2509
2510static struct dma_async_tx_descriptor *
2511dma40_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t dma_addr,
2512 size_t buf_len, size_t period_len,
2513 enum dma_transfer_direction direction, unsigned long flags)
2514{
2515 unsigned int periods = buf_len / period_len;
2516 struct dma_async_tx_descriptor *txd;
2517 struct scatterlist *sg;
2518 int i;
2519
2520 sg = kcalloc(periods + 1, sizeof(struct scatterlist), GFP_NOWAIT);
2521 if (!sg)
2522 return NULL;
2523
2524 for (i = 0; i < periods; i++) {
2525 sg_dma_address(&sg[i]) = dma_addr;
2526 sg_dma_len(&sg[i]) = period_len;
2527 dma_addr += period_len;
2528 }
2529
2530 sg_chain(sg, periods + 1, sg);
2531
2532 txd = d40_prep_sg(chan, sg, sg, periods, direction,
2533 DMA_PREP_INTERRUPT);
2534
2535 kfree(sg);
2536
2537 return txd;
2538}
2539
2540static enum dma_status d40_tx_status(struct dma_chan *chan,
2541 dma_cookie_t cookie,
2542 struct dma_tx_state *txstate)
2543{
2544 struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
2545 enum dma_status ret;
2546
2547 if (d40c->phy_chan == NULL) {
2548 chan_err(d40c, "Cannot read status of unallocated channel\n");
2549 return -EINVAL;
2550 }
2551
2552 ret = dma_cookie_status(chan, cookie, txstate);
2553 if (ret != DMA_COMPLETE && txstate)
2554 dma_set_residue(txstate, stedma40_residue(chan));
2555
2556 if (d40_is_paused(d40c))
2557 ret = DMA_PAUSED;
2558
2559 return ret;
2560}
2561
2562static void d40_issue_pending(struct dma_chan *chan)
2563{
2564 struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
2565 unsigned long flags;
2566
2567 if (d40c->phy_chan == NULL) {
2568 chan_err(d40c, "Channel is not allocated!\n");
2569 return;
2570 }
2571
2572 spin_lock_irqsave(&d40c->lock, flags);
2573
2574 list_splice_tail_init(&d40c->pending_queue, &d40c->queue);
2575
2576 /* Busy means that queued jobs are already being processed */
2577 if (!d40c->busy)
2578 (void) d40_queue_start(d40c);
2579
2580 spin_unlock_irqrestore(&d40c->lock, flags);
2581}
2582
2583static int d40_terminate_all(struct dma_chan *chan)
2584{
2585 unsigned long flags;
2586 struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
2587 int ret;
2588
2589 if (d40c->phy_chan == NULL) {
2590 chan_err(d40c, "Channel is not allocated!\n");
2591 return -EINVAL;
2592 }
2593
2594 spin_lock_irqsave(&d40c->lock, flags);
2595
2596 pm_runtime_get_sync(d40c->base->dev);
2597 ret = d40_channel_execute_command(d40c, D40_DMA_STOP);
2598 if (ret)
2599 chan_err(d40c, "Failed to stop channel\n");
2600
2601 d40_term_all(d40c);
2602 pm_runtime_mark_last_busy(d40c->base->dev);
2603 pm_runtime_put_autosuspend(d40c->base->dev);
2604 if (d40c->busy) {
2605 pm_runtime_mark_last_busy(d40c->base->dev);
2606 pm_runtime_put_autosuspend(d40c->base->dev);
2607 }
2608 d40c->busy = false;
2609
2610 spin_unlock_irqrestore(&d40c->lock, flags);
2611 return 0;
2612}
2613
2614static int
2615dma40_config_to_halfchannel(struct d40_chan *d40c,
2616 struct stedma40_half_channel_info *info,
2617 u32 maxburst)
2618{
2619 int psize;
2620
2621 if (chan_is_logical(d40c)) {
2622 if (maxburst >= 16)
2623 psize = STEDMA40_PSIZE_LOG_16;
2624 else if (maxburst >= 8)
2625 psize = STEDMA40_PSIZE_LOG_8;
2626 else if (maxburst >= 4)
2627 psize = STEDMA40_PSIZE_LOG_4;
2628 else
2629 psize = STEDMA40_PSIZE_LOG_1;
2630 } else {
2631 if (maxburst >= 16)
2632 psize = STEDMA40_PSIZE_PHY_16;
2633 else if (maxburst >= 8)
2634 psize = STEDMA40_PSIZE_PHY_8;
2635 else if (maxburst >= 4)
2636 psize = STEDMA40_PSIZE_PHY_4;
2637 else
2638 psize = STEDMA40_PSIZE_PHY_1;
2639 }
2640
2641 info->psize = psize;
2642 info->flow_ctrl = STEDMA40_NO_FLOW_CTRL;
2643
2644 return 0;
2645}
2646
2647static int d40_set_runtime_config(struct dma_chan *chan,
2648 struct dma_slave_config *config)
2649{
2650 struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
2651
2652 memcpy(&d40c->slave_config, config, sizeof(*config));
2653
2654 return 0;
2655}
2656
2657/* Runtime reconfiguration extension */
2658static int d40_set_runtime_config_write(struct dma_chan *chan,
2659 struct dma_slave_config *config,
2660 enum dma_transfer_direction direction)
2661{
2662 struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
2663 struct stedma40_chan_cfg *cfg = &d40c->dma_cfg;
2664 enum dma_slave_buswidth src_addr_width, dst_addr_width;
2665 dma_addr_t config_addr;
2666 u32 src_maxburst, dst_maxburst;
2667 int ret;
2668
2669 if (d40c->phy_chan == NULL) {
2670 chan_err(d40c, "Channel is not allocated!\n");
2671 return -EINVAL;
2672 }
2673
2674 src_addr_width = config->src_addr_width;
2675 src_maxburst = config->src_maxburst;
2676 dst_addr_width = config->dst_addr_width;
2677 dst_maxburst = config->dst_maxburst;
2678
2679 if (direction == DMA_DEV_TO_MEM) {
2680 config_addr = config->src_addr;
2681
2682 if (cfg->dir != DMA_DEV_TO_MEM)
2683 dev_dbg(d40c->base->dev,
2684 "channel was not configured for peripheral "
2685 "to memory transfer (%d) overriding\n",
2686 cfg->dir);
2687 cfg->dir = DMA_DEV_TO_MEM;
2688
2689 /* Configure the memory side */
2690 if (dst_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED)
2691 dst_addr_width = src_addr_width;
2692 if (dst_maxburst == 0)
2693 dst_maxburst = src_maxburst;
2694
2695 } else if (direction == DMA_MEM_TO_DEV) {
2696 config_addr = config->dst_addr;
2697
2698 if (cfg->dir != DMA_MEM_TO_DEV)
2699 dev_dbg(d40c->base->dev,
2700 "channel was not configured for memory "
2701 "to peripheral transfer (%d) overriding\n",
2702 cfg->dir);
2703 cfg->dir = DMA_MEM_TO_DEV;
2704
2705 /* Configure the memory side */
2706 if (src_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED)
2707 src_addr_width = dst_addr_width;
2708 if (src_maxburst == 0)
2709 src_maxburst = dst_maxburst;
2710 } else {
2711 dev_err(d40c->base->dev,
2712 "unrecognized channel direction %d\n",
2713 direction);
2714 return -EINVAL;
2715 }
2716
2717 if (config_addr <= 0) {
2718 dev_err(d40c->base->dev, "no address supplied\n");
2719 return -EINVAL;
2720 }
2721
2722 if (src_maxburst * src_addr_width != dst_maxburst * dst_addr_width) {
2723 dev_err(d40c->base->dev,
2724 "src/dst width/maxburst mismatch: %d*%d != %d*%d\n",
2725 src_maxburst,
2726 src_addr_width,
2727 dst_maxburst,
2728 dst_addr_width);
2729 return -EINVAL;
2730 }
2731
2732 if (src_maxburst > 16) {
2733 src_maxburst = 16;
2734 dst_maxburst = src_maxburst * src_addr_width / dst_addr_width;
2735 } else if (dst_maxburst > 16) {
2736 dst_maxburst = 16;
2737 src_maxburst = dst_maxburst * dst_addr_width / src_addr_width;
2738 }
2739
2740 /* Only valid widths are; 1, 2, 4 and 8. */
2741 if (src_addr_width <= DMA_SLAVE_BUSWIDTH_UNDEFINED ||
2742 src_addr_width > DMA_SLAVE_BUSWIDTH_8_BYTES ||
2743 dst_addr_width <= DMA_SLAVE_BUSWIDTH_UNDEFINED ||
2744 dst_addr_width > DMA_SLAVE_BUSWIDTH_8_BYTES ||
2745 !is_power_of_2(src_addr_width) ||
2746 !is_power_of_2(dst_addr_width))
2747 return -EINVAL;
2748
2749 cfg->src_info.data_width = src_addr_width;
2750 cfg->dst_info.data_width = dst_addr_width;
2751
2752 ret = dma40_config_to_halfchannel(d40c, &cfg->src_info,
2753 src_maxburst);
2754 if (ret)
2755 return ret;
2756
2757 ret = dma40_config_to_halfchannel(d40c, &cfg->dst_info,
2758 dst_maxburst);
2759 if (ret)
2760 return ret;
2761
2762 /* Fill in register values */
2763 if (chan_is_logical(d40c))
2764 d40_log_cfg(cfg, &d40c->log_def.lcsp1, &d40c->log_def.lcsp3);
2765 else
2766 d40_phy_cfg(cfg, &d40c->src_def_cfg, &d40c->dst_def_cfg);
2767
2768 /* These settings will take precedence later */
2769 d40c->runtime_addr = config_addr;
2770 d40c->runtime_direction = direction;
2771 dev_dbg(d40c->base->dev,
2772 "configured channel %s for %s, data width %d/%d, "
2773 "maxburst %d/%d elements, LE, no flow control\n",
2774 dma_chan_name(chan),
2775 (direction == DMA_DEV_TO_MEM) ? "RX" : "TX",
2776 src_addr_width, dst_addr_width,
2777 src_maxburst, dst_maxburst);
2778
2779 return 0;
2780}
2781
2782/* Initialization functions */
2783
2784static void __init d40_chan_init(struct d40_base *base, struct dma_device *dma,
2785 struct d40_chan *chans, int offset,
2786 int num_chans)
2787{
2788 int i = 0;
2789 struct d40_chan *d40c;
2790
2791 INIT_LIST_HEAD(&dma->channels);
2792
2793 for (i = offset; i < offset + num_chans; i++) {
2794 d40c = &chans[i];
2795 d40c->base = base;
2796 d40c->chan.device = dma;
2797
2798 spin_lock_init(&d40c->lock);
2799
2800 d40c->log_num = D40_PHY_CHAN;
2801
2802 INIT_LIST_HEAD(&d40c->done);
2803 INIT_LIST_HEAD(&d40c->active);
2804 INIT_LIST_HEAD(&d40c->queue);
2805 INIT_LIST_HEAD(&d40c->pending_queue);
2806 INIT_LIST_HEAD(&d40c->client);
2807 INIT_LIST_HEAD(&d40c->prepare_queue);
2808
2809 tasklet_init(&d40c->tasklet, dma_tasklet,
2810 (unsigned long) d40c);
2811
2812 list_add_tail(&d40c->chan.device_node,
2813 &dma->channels);
2814 }
2815}
2816
2817static void d40_ops_init(struct d40_base *base, struct dma_device *dev)
2818{
2819 if (dma_has_cap(DMA_SLAVE, dev->cap_mask)) {
2820 dev->device_prep_slave_sg = d40_prep_slave_sg;
2821 dev->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
2822 }
2823
2824 if (dma_has_cap(DMA_MEMCPY, dev->cap_mask)) {
2825 dev->device_prep_dma_memcpy = d40_prep_memcpy;
2826 dev->directions = BIT(DMA_MEM_TO_MEM);
2827 /*
2828 * This controller can only access address at even
2829 * 32bit boundaries, i.e. 2^2
2830 */
2831 dev->copy_align = DMAENGINE_ALIGN_4_BYTES;
2832 }
2833
2834 if (dma_has_cap(DMA_CYCLIC, dev->cap_mask))
2835 dev->device_prep_dma_cyclic = dma40_prep_dma_cyclic;
2836
2837 dev->device_alloc_chan_resources = d40_alloc_chan_resources;
2838 dev->device_free_chan_resources = d40_free_chan_resources;
2839 dev->device_issue_pending = d40_issue_pending;
2840 dev->device_tx_status = d40_tx_status;
2841 dev->device_config = d40_set_runtime_config;
2842 dev->device_pause = d40_pause;
2843 dev->device_resume = d40_resume;
2844 dev->device_terminate_all = d40_terminate_all;
2845 dev->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
2846 dev->dev = base->dev;
2847}
2848
2849static int __init d40_dmaengine_init(struct d40_base *base,
2850 int num_reserved_chans)
2851{
2852 int err ;
2853
2854 d40_chan_init(base, &base->dma_slave, base->log_chans,
2855 0, base->num_log_chans);
2856
2857 dma_cap_zero(base->dma_slave.cap_mask);
2858 dma_cap_set(DMA_SLAVE, base->dma_slave.cap_mask);
2859 dma_cap_set(DMA_CYCLIC, base->dma_slave.cap_mask);
2860
2861 d40_ops_init(base, &base->dma_slave);
2862
2863 err = dmaenginem_async_device_register(&base->dma_slave);
2864
2865 if (err) {
2866 d40_err(base->dev, "Failed to register slave channels\n");
2867 goto exit;
2868 }
2869
2870 d40_chan_init(base, &base->dma_memcpy, base->log_chans,
2871 base->num_log_chans, base->num_memcpy_chans);
2872
2873 dma_cap_zero(base->dma_memcpy.cap_mask);
2874 dma_cap_set(DMA_MEMCPY, base->dma_memcpy.cap_mask);
2875
2876 d40_ops_init(base, &base->dma_memcpy);
2877
2878 err = dmaenginem_async_device_register(&base->dma_memcpy);
2879
2880 if (err) {
2881 d40_err(base->dev,
2882 "Failed to register memcpy only channels\n");
2883 goto exit;
2884 }
2885
2886 d40_chan_init(base, &base->dma_both, base->phy_chans,
2887 0, num_reserved_chans);
2888
2889 dma_cap_zero(base->dma_both.cap_mask);
2890 dma_cap_set(DMA_SLAVE, base->dma_both.cap_mask);
2891 dma_cap_set(DMA_MEMCPY, base->dma_both.cap_mask);
2892 dma_cap_set(DMA_CYCLIC, base->dma_slave.cap_mask);
2893
2894 d40_ops_init(base, &base->dma_both);
2895 err = dmaenginem_async_device_register(&base->dma_both);
2896
2897 if (err) {
2898 d40_err(base->dev,
2899 "Failed to register logical and physical capable channels\n");
2900 goto exit;
2901 }
2902 return 0;
2903 exit:
2904 return err;
2905}
2906
2907/* Suspend resume functionality */
2908#ifdef CONFIG_PM_SLEEP
2909static int dma40_suspend(struct device *dev)
2910{
2911 struct d40_base *base = dev_get_drvdata(dev);
2912 int ret;
2913
2914 ret = pm_runtime_force_suspend(dev);
2915 if (ret)
2916 return ret;
2917
2918 if (base->lcpa_regulator)
2919 ret = regulator_disable(base->lcpa_regulator);
2920 return ret;
2921}
2922
2923static int dma40_resume(struct device *dev)
2924{
2925 struct d40_base *base = dev_get_drvdata(dev);
2926 int ret = 0;
2927
2928 if (base->lcpa_regulator) {
2929 ret = regulator_enable(base->lcpa_regulator);
2930 if (ret)
2931 return ret;
2932 }
2933
2934 return pm_runtime_force_resume(dev);
2935}
2936#endif
2937
2938#ifdef CONFIG_PM
2939static void dma40_backup(void __iomem *baseaddr, u32 *backup,
2940 u32 *regaddr, int num, bool save)
2941{
2942 int i;
2943
2944 for (i = 0; i < num; i++) {
2945 void __iomem *addr = baseaddr + regaddr[i];
2946
2947 if (save)
2948 backup[i] = readl_relaxed(addr);
2949 else
2950 writel_relaxed(backup[i], addr);
2951 }
2952}
2953
2954static void d40_save_restore_registers(struct d40_base *base, bool save)
2955{
2956 int i;
2957
2958 /* Save/Restore channel specific registers */
2959 for (i = 0; i < base->num_phy_chans; i++) {
2960 void __iomem *addr;
2961 int idx;
2962
2963 if (base->phy_res[i].reserved)
2964 continue;
2965
2966 addr = base->virtbase + D40_DREG_PCBASE + i * D40_DREG_PCDELTA;
2967 idx = i * ARRAY_SIZE(d40_backup_regs_chan);
2968
2969 dma40_backup(addr, &base->reg_val_backup_chan[idx],
2970 d40_backup_regs_chan,
2971 ARRAY_SIZE(d40_backup_regs_chan),
2972 save);
2973 }
2974
2975 /* Save/Restore global registers */
2976 dma40_backup(base->virtbase, base->reg_val_backup,
2977 d40_backup_regs, ARRAY_SIZE(d40_backup_regs),
2978 save);
2979
2980 /* Save/Restore registers only existing on dma40 v3 and later */
2981 if (base->gen_dmac.backup)
2982 dma40_backup(base->virtbase, base->reg_val_backup_v4,
2983 base->gen_dmac.backup,
2984 base->gen_dmac.backup_size,
2985 save);
2986}
2987
2988static int dma40_runtime_suspend(struct device *dev)
2989{
2990 struct d40_base *base = dev_get_drvdata(dev);
2991
2992 d40_save_restore_registers(base, true);
2993
2994 /* Don't disable/enable clocks for v1 due to HW bugs */
2995 if (base->rev != 1)
2996 writel_relaxed(base->gcc_pwr_off_mask,
2997 base->virtbase + D40_DREG_GCC);
2998
2999 return 0;
3000}
3001
3002static int dma40_runtime_resume(struct device *dev)
3003{
3004 struct d40_base *base = dev_get_drvdata(dev);
3005
3006 d40_save_restore_registers(base, false);
3007
3008 writel_relaxed(D40_DREG_GCC_ENABLE_ALL,
3009 base->virtbase + D40_DREG_GCC);
3010 return 0;
3011}
3012#endif
3013
3014static const struct dev_pm_ops dma40_pm_ops = {
3015 SET_LATE_SYSTEM_SLEEP_PM_OPS(dma40_suspend, dma40_resume)
3016 SET_RUNTIME_PM_OPS(dma40_runtime_suspend,
3017 dma40_runtime_resume,
3018 NULL)
3019};
3020
3021/* Initialization functions. */
3022
3023static int __init d40_phy_res_init(struct d40_base *base)
3024{
3025 int i;
3026 int num_phy_chans_avail = 0;
3027 u32 val[2];
3028 int odd_even_bit = -2;
3029 int gcc = D40_DREG_GCC_ENA;
3030
3031 val[0] = readl(base->virtbase + D40_DREG_PRSME);
3032 val[1] = readl(base->virtbase + D40_DREG_PRSMO);
3033
3034 for (i = 0; i < base->num_phy_chans; i++) {
3035 base->phy_res[i].num = i;
3036 odd_even_bit += 2 * ((i % 2) == 0);
3037 if (((val[i % 2] >> odd_even_bit) & 3) == 1) {
3038 /* Mark security only channels as occupied */
3039 base->phy_res[i].allocated_src = D40_ALLOC_PHY;
3040 base->phy_res[i].allocated_dst = D40_ALLOC_PHY;
3041 base->phy_res[i].reserved = true;
3042 gcc |= D40_DREG_GCC_EVTGRP_ENA(D40_PHYS_TO_GROUP(i),
3043 D40_DREG_GCC_SRC);
3044 gcc |= D40_DREG_GCC_EVTGRP_ENA(D40_PHYS_TO_GROUP(i),
3045 D40_DREG_GCC_DST);
3046
3047
3048 } else {
3049 base->phy_res[i].allocated_src = D40_ALLOC_FREE;
3050 base->phy_res[i].allocated_dst = D40_ALLOC_FREE;
3051 base->phy_res[i].reserved = false;
3052 num_phy_chans_avail++;
3053 }
3054 spin_lock_init(&base->phy_res[i].lock);
3055 }
3056
3057 /* Mark disabled channels as occupied */
3058 for (i = 0; base->plat_data->disabled_channels[i] != -1; i++) {
3059 int chan = base->plat_data->disabled_channels[i];
3060
3061 base->phy_res[chan].allocated_src = D40_ALLOC_PHY;
3062 base->phy_res[chan].allocated_dst = D40_ALLOC_PHY;
3063 base->phy_res[chan].reserved = true;
3064 gcc |= D40_DREG_GCC_EVTGRP_ENA(D40_PHYS_TO_GROUP(chan),
3065 D40_DREG_GCC_SRC);
3066 gcc |= D40_DREG_GCC_EVTGRP_ENA(D40_PHYS_TO_GROUP(chan),
3067 D40_DREG_GCC_DST);
3068 num_phy_chans_avail--;
3069 }
3070
3071 /* Mark soft_lli channels */
3072 for (i = 0; i < base->plat_data->num_of_soft_lli_chans; i++) {
3073 int chan = base->plat_data->soft_lli_chans[i];
3074
3075 base->phy_res[chan].use_soft_lli = true;
3076 }
3077
3078 dev_info(base->dev, "%d of %d physical DMA channels available\n",
3079 num_phy_chans_avail, base->num_phy_chans);
3080
3081 /* Verify settings extended vs standard */
3082 val[0] = readl(base->virtbase + D40_DREG_PRTYP);
3083
3084 for (i = 0; i < base->num_phy_chans; i++) {
3085
3086 if (base->phy_res[i].allocated_src == D40_ALLOC_FREE &&
3087 (val[0] & 0x3) != 1)
3088 dev_info(base->dev,
3089 "[%s] INFO: channel %d is misconfigured (%d)\n",
3090 __func__, i, val[0] & 0x3);
3091
3092 val[0] = val[0] >> 2;
3093 }
3094
3095 /*
3096 * To keep things simple, Enable all clocks initially.
3097 * The clocks will get managed later post channel allocation.
3098 * The clocks for the event lines on which reserved channels exists
3099 * are not managed here.
3100 */
3101 writel(D40_DREG_GCC_ENABLE_ALL, base->virtbase + D40_DREG_GCC);
3102 base->gcc_pwr_off_mask = gcc;
3103
3104 return num_phy_chans_avail;
3105}
3106
3107static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev)
3108{
3109 struct stedma40_platform_data *plat_data = dev_get_platdata(&pdev->dev);
3110 struct clk *clk;
3111 void __iomem *virtbase;
3112 struct resource *res;
3113 struct d40_base *base;
3114 int num_log_chans;
3115 int num_phy_chans;
3116 int num_memcpy_chans;
3117 int clk_ret = -EINVAL;
3118 int i;
3119 u32 pid;
3120 u32 cid;
3121 u8 rev;
3122
3123 clk = clk_get(&pdev->dev, NULL);
3124 if (IS_ERR(clk)) {
3125 d40_err(&pdev->dev, "No matching clock found\n");
3126 goto check_prepare_enabled;
3127 }
3128
3129 clk_ret = clk_prepare_enable(clk);
3130 if (clk_ret) {
3131 d40_err(&pdev->dev, "Failed to prepare/enable clock\n");
3132 goto disable_unprepare;
3133 }
3134
3135 /* Get IO for DMAC base address */
3136 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "base");
3137 if (!res)
3138 goto disable_unprepare;
3139
3140 if (request_mem_region(res->start, resource_size(res),
3141 D40_NAME " I/O base") == NULL)
3142 goto release_region;
3143
3144 virtbase = ioremap(res->start, resource_size(res));
3145 if (!virtbase)
3146 goto release_region;
3147
3148 /* This is just a regular AMBA PrimeCell ID actually */
3149 for (pid = 0, i = 0; i < 4; i++)
3150 pid |= (readl(virtbase + resource_size(res) - 0x20 + 4 * i)
3151 & 255) << (i * 8);
3152 for (cid = 0, i = 0; i < 4; i++)
3153 cid |= (readl(virtbase + resource_size(res) - 0x10 + 4 * i)
3154 & 255) << (i * 8);
3155
3156 if (cid != AMBA_CID) {
3157 d40_err(&pdev->dev, "Unknown hardware! No PrimeCell ID\n");
3158 goto unmap_io;
3159 }
3160 if (AMBA_MANF_BITS(pid) != AMBA_VENDOR_ST) {
3161 d40_err(&pdev->dev, "Unknown designer! Got %x wanted %x\n",
3162 AMBA_MANF_BITS(pid),
3163 AMBA_VENDOR_ST);
3164 goto unmap_io;
3165 }
3166 /*
3167 * HW revision:
3168 * DB8500ed has revision 0
3169 * ? has revision 1
3170 * DB8500v1 has revision 2
3171 * DB8500v2 has revision 3
3172 * AP9540v1 has revision 4
3173 * DB8540v1 has revision 4
3174 */
3175 rev = AMBA_REV_BITS(pid);
3176 if (rev < 2) {
3177 d40_err(&pdev->dev, "hardware revision: %d is not supported", rev);
3178 goto unmap_io;
3179 }
3180
3181 /* The number of physical channels on this HW */
3182 if (plat_data->num_of_phy_chans)
3183 num_phy_chans = plat_data->num_of_phy_chans;
3184 else
3185 num_phy_chans = 4 * (readl(virtbase + D40_DREG_ICFG) & 0x7) + 4;
3186
3187 /* The number of channels used for memcpy */
3188 if (plat_data->num_of_memcpy_chans)
3189 num_memcpy_chans = plat_data->num_of_memcpy_chans;
3190 else
3191 num_memcpy_chans = ARRAY_SIZE(dma40_memcpy_channels);
3192
3193 num_log_chans = num_phy_chans * D40_MAX_LOG_CHAN_PER_PHY;
3194
3195 dev_info(&pdev->dev,
3196 "hardware rev: %d @ %pa with %d physical and %d logical channels\n",
3197 rev, &res->start, num_phy_chans, num_log_chans);
3198
3199 base = kzalloc(ALIGN(sizeof(struct d40_base), 4) +
3200 (num_phy_chans + num_log_chans + num_memcpy_chans) *
3201 sizeof(struct d40_chan), GFP_KERNEL);
3202
3203 if (base == NULL)
3204 goto unmap_io;
3205
3206 base->rev = rev;
3207 base->clk = clk;
3208 base->num_memcpy_chans = num_memcpy_chans;
3209 base->num_phy_chans = num_phy_chans;
3210 base->num_log_chans = num_log_chans;
3211 base->phy_start = res->start;
3212 base->phy_size = resource_size(res);
3213 base->virtbase = virtbase;
3214 base->plat_data = plat_data;
3215 base->dev = &pdev->dev;
3216 base->phy_chans = ((void *)base) + ALIGN(sizeof(struct d40_base), 4);
3217 base->log_chans = &base->phy_chans[num_phy_chans];
3218
3219 if (base->plat_data->num_of_phy_chans == 14) {
3220 base->gen_dmac.backup = d40_backup_regs_v4b;
3221 base->gen_dmac.backup_size = BACKUP_REGS_SZ_V4B;
3222 base->gen_dmac.interrupt_en = D40_DREG_CPCMIS;
3223 base->gen_dmac.interrupt_clear = D40_DREG_CPCICR;
3224 base->gen_dmac.realtime_en = D40_DREG_CRSEG1;
3225 base->gen_dmac.realtime_clear = D40_DREG_CRCEG1;
3226 base->gen_dmac.high_prio_en = D40_DREG_CPSEG1;
3227 base->gen_dmac.high_prio_clear = D40_DREG_CPCEG1;
3228 base->gen_dmac.il = il_v4b;
3229 base->gen_dmac.il_size = ARRAY_SIZE(il_v4b);
3230 base->gen_dmac.init_reg = dma_init_reg_v4b;
3231 base->gen_dmac.init_reg_size = ARRAY_SIZE(dma_init_reg_v4b);
3232 } else {
3233 if (base->rev >= 3) {
3234 base->gen_dmac.backup = d40_backup_regs_v4a;
3235 base->gen_dmac.backup_size = BACKUP_REGS_SZ_V4A;
3236 }
3237 base->gen_dmac.interrupt_en = D40_DREG_PCMIS;
3238 base->gen_dmac.interrupt_clear = D40_DREG_PCICR;
3239 base->gen_dmac.realtime_en = D40_DREG_RSEG1;
3240 base->gen_dmac.realtime_clear = D40_DREG_RCEG1;
3241 base->gen_dmac.high_prio_en = D40_DREG_PSEG1;
3242 base->gen_dmac.high_prio_clear = D40_DREG_PCEG1;
3243 base->gen_dmac.il = il_v4a;
3244 base->gen_dmac.il_size = ARRAY_SIZE(il_v4a);
3245 base->gen_dmac.init_reg = dma_init_reg_v4a;
3246 base->gen_dmac.init_reg_size = ARRAY_SIZE(dma_init_reg_v4a);
3247 }
3248
3249 base->phy_res = kcalloc(num_phy_chans,
3250 sizeof(*base->phy_res),
3251 GFP_KERNEL);
3252 if (!base->phy_res)
3253 goto free_base;
3254
3255 base->lookup_phy_chans = kcalloc(num_phy_chans,
3256 sizeof(*base->lookup_phy_chans),
3257 GFP_KERNEL);
3258 if (!base->lookup_phy_chans)
3259 goto free_phy_res;
3260
3261 base->lookup_log_chans = kcalloc(num_log_chans,
3262 sizeof(*base->lookup_log_chans),
3263 GFP_KERNEL);
3264 if (!base->lookup_log_chans)
3265 goto free_phy_chans;
3266
3267 base->reg_val_backup_chan = kmalloc_array(base->num_phy_chans,
3268 sizeof(d40_backup_regs_chan),
3269 GFP_KERNEL);
3270 if (!base->reg_val_backup_chan)
3271 goto free_log_chans;
3272
3273 base->lcla_pool.alloc_map = kcalloc(num_phy_chans
3274 * D40_LCLA_LINK_PER_EVENT_GRP,
3275 sizeof(*base->lcla_pool.alloc_map),
3276 GFP_KERNEL);
3277 if (!base->lcla_pool.alloc_map)
3278 goto free_backup_chan;
3279
3280 base->regs_interrupt = kmalloc_array(base->gen_dmac.il_size,
3281 sizeof(*base->regs_interrupt),
3282 GFP_KERNEL);
3283 if (!base->regs_interrupt)
3284 goto free_map;
3285
3286 base->desc_slab = kmem_cache_create(D40_NAME, sizeof(struct d40_desc),
3287 0, SLAB_HWCACHE_ALIGN,
3288 NULL);
3289 if (base->desc_slab == NULL)
3290 goto free_regs;
3291
3292
3293 return base;
3294 free_regs:
3295 kfree(base->regs_interrupt);
3296 free_map:
3297 kfree(base->lcla_pool.alloc_map);
3298 free_backup_chan:
3299 kfree(base->reg_val_backup_chan);
3300 free_log_chans:
3301 kfree(base->lookup_log_chans);
3302 free_phy_chans:
3303 kfree(base->lookup_phy_chans);
3304 free_phy_res:
3305 kfree(base->phy_res);
3306 free_base:
3307 kfree(base);
3308 unmap_io:
3309 iounmap(virtbase);
3310 release_region:
3311 release_mem_region(res->start, resource_size(res));
3312 check_prepare_enabled:
3313 if (!clk_ret)
3314 disable_unprepare:
3315 clk_disable_unprepare(clk);
3316 if (!IS_ERR(clk))
3317 clk_put(clk);
3318 return NULL;
3319}
3320
3321static void __init d40_hw_init(struct d40_base *base)
3322{
3323
3324 int i;
3325 u32 prmseo[2] = {0, 0};
3326 u32 activeo[2] = {0xFFFFFFFF, 0xFFFFFFFF};
3327 u32 pcmis = 0;
3328 u32 pcicr = 0;
3329 struct d40_reg_val *dma_init_reg = base->gen_dmac.init_reg;
3330 u32 reg_size = base->gen_dmac.init_reg_size;
3331
3332 for (i = 0; i < reg_size; i++)
3333 writel(dma_init_reg[i].val,
3334 base->virtbase + dma_init_reg[i].reg);
3335
3336 /* Configure all our dma channels to default settings */
3337 for (i = 0; i < base->num_phy_chans; i++) {
3338
3339 activeo[i % 2] = activeo[i % 2] << 2;
3340
3341 if (base->phy_res[base->num_phy_chans - i - 1].allocated_src
3342 == D40_ALLOC_PHY) {
3343 activeo[i % 2] |= 3;
3344 continue;
3345 }
3346
3347 /* Enable interrupt # */
3348 pcmis = (pcmis << 1) | 1;
3349
3350 /* Clear interrupt # */
3351 pcicr = (pcicr << 1) | 1;
3352
3353 /* Set channel to physical mode */
3354 prmseo[i % 2] = prmseo[i % 2] << 2;
3355 prmseo[i % 2] |= 1;
3356
3357 }
3358
3359 writel(prmseo[1], base->virtbase + D40_DREG_PRMSE);
3360 writel(prmseo[0], base->virtbase + D40_DREG_PRMSO);
3361 writel(activeo[1], base->virtbase + D40_DREG_ACTIVE);
3362 writel(activeo[0], base->virtbase + D40_DREG_ACTIVO);
3363
3364 /* Write which interrupt to enable */
3365 writel(pcmis, base->virtbase + base->gen_dmac.interrupt_en);
3366
3367 /* Write which interrupt to clear */
3368 writel(pcicr, base->virtbase + base->gen_dmac.interrupt_clear);
3369
3370 /* These are __initdata and cannot be accessed after init */
3371 base->gen_dmac.init_reg = NULL;
3372 base->gen_dmac.init_reg_size = 0;
3373}
3374
3375static int __init d40_lcla_allocate(struct d40_base *base)
3376{
3377 struct d40_lcla_pool *pool = &base->lcla_pool;
3378 unsigned long *page_list;
3379 int i, j;
3380 int ret;
3381
3382 /*
3383 * This is somewhat ugly. We need 8192 bytes that are 18 bit aligned,
3384 * To full fill this hardware requirement without wasting 256 kb
3385 * we allocate pages until we get an aligned one.
3386 */
3387 page_list = kmalloc_array(MAX_LCLA_ALLOC_ATTEMPTS,
3388 sizeof(*page_list),
3389 GFP_KERNEL);
3390 if (!page_list)
3391 return -ENOMEM;
3392
3393 /* Calculating how many pages that are required */
3394 base->lcla_pool.pages = SZ_1K * base->num_phy_chans / PAGE_SIZE;
3395
3396 for (i = 0; i < MAX_LCLA_ALLOC_ATTEMPTS; i++) {
3397 page_list[i] = __get_free_pages(GFP_KERNEL,
3398 base->lcla_pool.pages);
3399 if (!page_list[i]) {
3400
3401 d40_err(base->dev, "Failed to allocate %d pages.\n",
3402 base->lcla_pool.pages);
3403 ret = -ENOMEM;
3404
3405 for (j = 0; j < i; j++)
3406 free_pages(page_list[j], base->lcla_pool.pages);
3407 goto free_page_list;
3408 }
3409
3410 if ((virt_to_phys((void *)page_list[i]) &
3411 (LCLA_ALIGNMENT - 1)) == 0)
3412 break;
3413 }
3414
3415 for (j = 0; j < i; j++)
3416 free_pages(page_list[j], base->lcla_pool.pages);
3417
3418 if (i < MAX_LCLA_ALLOC_ATTEMPTS) {
3419 base->lcla_pool.base = (void *)page_list[i];
3420 } else {
3421 /*
3422 * After many attempts and no succees with finding the correct
3423 * alignment, try with allocating a big buffer.
3424 */
3425 dev_warn(base->dev,
3426 "[%s] Failed to get %d pages @ 18 bit align.\n",
3427 __func__, base->lcla_pool.pages);
3428 base->lcla_pool.base_unaligned = kmalloc(SZ_1K *
3429 base->num_phy_chans +
3430 LCLA_ALIGNMENT,
3431 GFP_KERNEL);
3432 if (!base->lcla_pool.base_unaligned) {
3433 ret = -ENOMEM;
3434 goto free_page_list;
3435 }
3436
3437 base->lcla_pool.base = PTR_ALIGN(base->lcla_pool.base_unaligned,
3438 LCLA_ALIGNMENT);
3439 }
3440
3441 pool->dma_addr = dma_map_single(base->dev, pool->base,
3442 SZ_1K * base->num_phy_chans,
3443 DMA_TO_DEVICE);
3444 if (dma_mapping_error(base->dev, pool->dma_addr)) {
3445 pool->dma_addr = 0;
3446 ret = -ENOMEM;
3447 goto free_page_list;
3448 }
3449
3450 writel(virt_to_phys(base->lcla_pool.base),
3451 base->virtbase + D40_DREG_LCLA);
3452 ret = 0;
3453 free_page_list:
3454 kfree(page_list);
3455 return ret;
3456}
3457
3458static int __init d40_of_probe(struct platform_device *pdev,
3459 struct device_node *np)
3460{
3461 struct stedma40_platform_data *pdata;
3462 int num_phy = 0, num_memcpy = 0, num_disabled = 0;
3463 const __be32 *list;
3464
3465 pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
3466 if (!pdata)
3467 return -ENOMEM;
3468
3469 /* If absent this value will be obtained from h/w. */
3470 of_property_read_u32(np, "dma-channels", &num_phy);
3471 if (num_phy > 0)
3472 pdata->num_of_phy_chans = num_phy;
3473
3474 list = of_get_property(np, "memcpy-channels", &num_memcpy);
3475 num_memcpy /= sizeof(*list);
3476
3477 if (num_memcpy > D40_MEMCPY_MAX_CHANS || num_memcpy <= 0) {
3478 d40_err(&pdev->dev,
3479 "Invalid number of memcpy channels specified (%d)\n",
3480 num_memcpy);
3481 return -EINVAL;
3482 }
3483 pdata->num_of_memcpy_chans = num_memcpy;
3484
3485 of_property_read_u32_array(np, "memcpy-channels",
3486 dma40_memcpy_channels,
3487 num_memcpy);
3488
3489 list = of_get_property(np, "disabled-channels", &num_disabled);
3490 num_disabled /= sizeof(*list);
3491
3492 if (num_disabled >= STEDMA40_MAX_PHYS || num_disabled < 0) {
3493 d40_err(&pdev->dev,
3494 "Invalid number of disabled channels specified (%d)\n",
3495 num_disabled);
3496 return -EINVAL;
3497 }
3498
3499 of_property_read_u32_array(np, "disabled-channels",
3500 pdata->disabled_channels,
3501 num_disabled);
3502 pdata->disabled_channels[num_disabled] = -1;
3503
3504 pdev->dev.platform_data = pdata;
3505
3506 return 0;
3507}
3508
3509static int __init d40_probe(struct platform_device *pdev)
3510{
3511 struct stedma40_platform_data *plat_data = dev_get_platdata(&pdev->dev);
3512 struct device_node *np = pdev->dev.of_node;
3513 int ret = -ENOENT;
3514 struct d40_base *base;
3515 struct resource *res;
3516 int num_reserved_chans;
3517 u32 val;
3518
3519 if (!plat_data) {
3520 if (np) {
3521 if (d40_of_probe(pdev, np)) {
3522 ret = -ENOMEM;
3523 goto report_failure;
3524 }
3525 } else {
3526 d40_err(&pdev->dev, "No pdata or Device Tree provided\n");
3527 goto report_failure;
3528 }
3529 }
3530
3531 base = d40_hw_detect_init(pdev);
3532 if (!base)
3533 goto report_failure;
3534
3535 num_reserved_chans = d40_phy_res_init(base);
3536
3537 platform_set_drvdata(pdev, base);
3538
3539 spin_lock_init(&base->interrupt_lock);
3540 spin_lock_init(&base->execmd_lock);
3541
3542 /* Get IO for logical channel parameter address */
3543 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "lcpa");
3544 if (!res) {
3545 ret = -ENOENT;
3546 d40_err(&pdev->dev, "No \"lcpa\" memory resource\n");
3547 goto destroy_cache;
3548 }
3549 base->lcpa_size = resource_size(res);
3550 base->phy_lcpa = res->start;
3551
3552 if (request_mem_region(res->start, resource_size(res),
3553 D40_NAME " I/O lcpa") == NULL) {
3554 ret = -EBUSY;
3555 d40_err(&pdev->dev, "Failed to request LCPA region %pR\n", res);
3556 goto destroy_cache;
3557 }
3558
3559 /* We make use of ESRAM memory for this. */
3560 val = readl(base->virtbase + D40_DREG_LCPA);
3561 if (res->start != val && val != 0) {
3562 dev_warn(&pdev->dev,
3563 "[%s] Mismatch LCPA dma 0x%x, def %pa\n",
3564 __func__, val, &res->start);
3565 } else
3566 writel(res->start, base->virtbase + D40_DREG_LCPA);
3567
3568 base->lcpa_base = ioremap(res->start, resource_size(res));
3569 if (!base->lcpa_base) {
3570 ret = -ENOMEM;
3571 d40_err(&pdev->dev, "Failed to ioremap LCPA region\n");
3572 goto destroy_cache;
3573 }
3574 /* If lcla has to be located in ESRAM we don't need to allocate */
3575 if (base->plat_data->use_esram_lcla) {
3576 res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
3577 "lcla_esram");
3578 if (!res) {
3579 ret = -ENOENT;
3580 d40_err(&pdev->dev,
3581 "No \"lcla_esram\" memory resource\n");
3582 goto destroy_cache;
3583 }
3584 base->lcla_pool.base = ioremap(res->start,
3585 resource_size(res));
3586 if (!base->lcla_pool.base) {
3587 ret = -ENOMEM;
3588 d40_err(&pdev->dev, "Failed to ioremap LCLA region\n");
3589 goto destroy_cache;
3590 }
3591 writel(res->start, base->virtbase + D40_DREG_LCLA);
3592
3593 } else {
3594 ret = d40_lcla_allocate(base);
3595 if (ret) {
3596 d40_err(&pdev->dev, "Failed to allocate LCLA area\n");
3597 goto destroy_cache;
3598 }
3599 }
3600
3601 spin_lock_init(&base->lcla_pool.lock);
3602
3603 base->irq = platform_get_irq(pdev, 0);
3604
3605 ret = request_irq(base->irq, d40_handle_interrupt, 0, D40_NAME, base);
3606 if (ret) {
3607 d40_err(&pdev->dev, "No IRQ defined\n");
3608 goto destroy_cache;
3609 }
3610
3611 if (base->plat_data->use_esram_lcla) {
3612
3613 base->lcpa_regulator = regulator_get(base->dev, "lcla_esram");
3614 if (IS_ERR(base->lcpa_regulator)) {
3615 d40_err(&pdev->dev, "Failed to get lcpa_regulator\n");
3616 ret = PTR_ERR(base->lcpa_regulator);
3617 base->lcpa_regulator = NULL;
3618 goto destroy_cache;
3619 }
3620
3621 ret = regulator_enable(base->lcpa_regulator);
3622 if (ret) {
3623 d40_err(&pdev->dev,
3624 "Failed to enable lcpa_regulator\n");
3625 regulator_put(base->lcpa_regulator);
3626 base->lcpa_regulator = NULL;
3627 goto destroy_cache;
3628 }
3629 }
3630
3631 writel_relaxed(D40_DREG_GCC_ENABLE_ALL, base->virtbase + D40_DREG_GCC);
3632
3633 pm_runtime_irq_safe(base->dev);
3634 pm_runtime_set_autosuspend_delay(base->dev, DMA40_AUTOSUSPEND_DELAY);
3635 pm_runtime_use_autosuspend(base->dev);
3636 pm_runtime_mark_last_busy(base->dev);
3637 pm_runtime_set_active(base->dev);
3638 pm_runtime_enable(base->dev);
3639
3640 ret = d40_dmaengine_init(base, num_reserved_chans);
3641 if (ret)
3642 goto destroy_cache;
3643
3644 base->dev->dma_parms = &base->dma_parms;
3645 ret = dma_set_max_seg_size(base->dev, STEDMA40_MAX_SEG_SIZE);
3646 if (ret) {
3647 d40_err(&pdev->dev, "Failed to set dma max seg size\n");
3648 goto destroy_cache;
3649 }
3650
3651 d40_hw_init(base);
3652
3653 if (np) {
3654 ret = of_dma_controller_register(np, d40_xlate, NULL);
3655 if (ret)
3656 dev_err(&pdev->dev,
3657 "could not register of_dma_controller\n");
3658 }
3659
3660 dev_info(base->dev, "initialized\n");
3661 return 0;
3662 destroy_cache:
3663 kmem_cache_destroy(base->desc_slab);
3664 if (base->virtbase)
3665 iounmap(base->virtbase);
3666
3667 if (base->lcla_pool.base && base->plat_data->use_esram_lcla) {
3668 iounmap(base->lcla_pool.base);
3669 base->lcla_pool.base = NULL;
3670 }
3671
3672 if (base->lcla_pool.dma_addr)
3673 dma_unmap_single(base->dev, base->lcla_pool.dma_addr,
3674 SZ_1K * base->num_phy_chans,
3675 DMA_TO_DEVICE);
3676
3677 if (!base->lcla_pool.base_unaligned && base->lcla_pool.base)
3678 free_pages((unsigned long)base->lcla_pool.base,
3679 base->lcla_pool.pages);
3680
3681 kfree(base->lcla_pool.base_unaligned);
3682
3683 if (base->phy_lcpa)
3684 release_mem_region(base->phy_lcpa,
3685 base->lcpa_size);
3686 if (base->phy_start)
3687 release_mem_region(base->phy_start,
3688 base->phy_size);
3689 if (base->clk) {
3690 clk_disable_unprepare(base->clk);
3691 clk_put(base->clk);
3692 }
3693
3694 if (base->lcpa_regulator) {
3695 regulator_disable(base->lcpa_regulator);
3696 regulator_put(base->lcpa_regulator);
3697 }
3698
3699 kfree(base->lcla_pool.alloc_map);
3700 kfree(base->lookup_log_chans);
3701 kfree(base->lookup_phy_chans);
3702 kfree(base->phy_res);
3703 kfree(base);
3704 report_failure:
3705 d40_err(&pdev->dev, "probe failed\n");
3706 return ret;
3707}
3708
3709static const struct of_device_id d40_match[] = {
3710 { .compatible = "stericsson,dma40", },
3711 {}
3712};
3713
3714static struct platform_driver d40_driver = {
3715 .driver = {
3716 .name = D40_NAME,
3717 .pm = &dma40_pm_ops,
3718 .of_match_table = d40_match,
3719 },
3720};
3721
3722static int __init stedma40_init(void)
3723{
3724 return platform_driver_probe(&d40_driver, d40_probe);
3725}
3726subsys_initcall(stedma40_init);
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (C) Ericsson AB 2007-2008
4 * Copyright (C) ST-Ericsson SA 2008-2010
5 * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson
6 * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson
7 */
8
9#include <linux/dma-mapping.h>
10#include <linux/kernel.h>
11#include <linux/slab.h>
12#include <linux/export.h>
13#include <linux/dmaengine.h>
14#include <linux/platform_device.h>
15#include <linux/clk.h>
16#include <linux/delay.h>
17#include <linux/log2.h>
18#include <linux/pm.h>
19#include <linux/pm_runtime.h>
20#include <linux/err.h>
21#include <linux/of.h>
22#include <linux/of_dma.h>
23#include <linux/amba/bus.h>
24#include <linux/regulator/consumer.h>
25#include <linux/platform_data/dma-ste-dma40.h>
26
27#include "dmaengine.h"
28#include "ste_dma40_ll.h"
29
30#define D40_NAME "dma40"
31
32#define D40_PHY_CHAN -1
33
34/* For masking out/in 2 bit channel positions */
35#define D40_CHAN_POS(chan) (2 * (chan / 2))
36#define D40_CHAN_POS_MASK(chan) (0x3 << D40_CHAN_POS(chan))
37
38/* Maximum iterations taken before giving up suspending a channel */
39#define D40_SUSPEND_MAX_IT 500
40
41/* Milliseconds */
42#define DMA40_AUTOSUSPEND_DELAY 100
43
44/* Hardware requirement on LCLA alignment */
45#define LCLA_ALIGNMENT 0x40000
46
47/* Max number of links per event group */
48#define D40_LCLA_LINK_PER_EVENT_GRP 128
49#define D40_LCLA_END D40_LCLA_LINK_PER_EVENT_GRP
50
51/* Max number of logical channels per physical channel */
52#define D40_MAX_LOG_CHAN_PER_PHY 32
53
54/* Attempts before giving up to trying to get pages that are aligned */
55#define MAX_LCLA_ALLOC_ATTEMPTS 256
56
57/* Bit markings for allocation map */
58#define D40_ALLOC_FREE BIT(31)
59#define D40_ALLOC_PHY BIT(30)
60#define D40_ALLOC_LOG_FREE 0
61
62#define D40_MEMCPY_MAX_CHANS 8
63
64/* Reserved event lines for memcpy only. */
65#define DB8500_DMA_MEMCPY_EV_0 51
66#define DB8500_DMA_MEMCPY_EV_1 56
67#define DB8500_DMA_MEMCPY_EV_2 57
68#define DB8500_DMA_MEMCPY_EV_3 58
69#define DB8500_DMA_MEMCPY_EV_4 59
70#define DB8500_DMA_MEMCPY_EV_5 60
71
72static int dma40_memcpy_channels[] = {
73 DB8500_DMA_MEMCPY_EV_0,
74 DB8500_DMA_MEMCPY_EV_1,
75 DB8500_DMA_MEMCPY_EV_2,
76 DB8500_DMA_MEMCPY_EV_3,
77 DB8500_DMA_MEMCPY_EV_4,
78 DB8500_DMA_MEMCPY_EV_5,
79};
80
81/* Default configuration for physical memcpy */
82static const struct stedma40_chan_cfg dma40_memcpy_conf_phy = {
83 .mode = STEDMA40_MODE_PHYSICAL,
84 .dir = DMA_MEM_TO_MEM,
85
86 .src_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
87 .src_info.psize = STEDMA40_PSIZE_PHY_1,
88 .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
89
90 .dst_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
91 .dst_info.psize = STEDMA40_PSIZE_PHY_1,
92 .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
93};
94
95/* Default configuration for logical memcpy */
96static const struct stedma40_chan_cfg dma40_memcpy_conf_log = {
97 .mode = STEDMA40_MODE_LOGICAL,
98 .dir = DMA_MEM_TO_MEM,
99
100 .src_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
101 .src_info.psize = STEDMA40_PSIZE_LOG_1,
102 .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
103
104 .dst_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
105 .dst_info.psize = STEDMA40_PSIZE_LOG_1,
106 .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
107};
108
109/**
110 * enum 40_command - The different commands and/or statuses.
111 *
112 * @D40_DMA_STOP: DMA channel command STOP or status STOPPED,
113 * @D40_DMA_RUN: The DMA channel is RUNNING of the command RUN.
114 * @D40_DMA_SUSPEND_REQ: Request the DMA to SUSPEND as soon as possible.
115 * @D40_DMA_SUSPENDED: The DMA channel is SUSPENDED.
116 */
117enum d40_command {
118 D40_DMA_STOP = 0,
119 D40_DMA_RUN = 1,
120 D40_DMA_SUSPEND_REQ = 2,
121 D40_DMA_SUSPENDED = 3
122};
123
124/*
125 * enum d40_events - The different Event Enables for the event lines.
126 *
127 * @D40_DEACTIVATE_EVENTLINE: De-activate Event line, stopping the logical chan.
128 * @D40_ACTIVATE_EVENTLINE: Activate the Event line, to start a logical chan.
129 * @D40_SUSPEND_REQ_EVENTLINE: Requesting for suspending a event line.
130 * @D40_ROUND_EVENTLINE: Status check for event line.
131 */
132
133enum d40_events {
134 D40_DEACTIVATE_EVENTLINE = 0,
135 D40_ACTIVATE_EVENTLINE = 1,
136 D40_SUSPEND_REQ_EVENTLINE = 2,
137 D40_ROUND_EVENTLINE = 3
138};
139
140/*
141 * These are the registers that has to be saved and later restored
142 * when the DMA hw is powered off.
143 * TODO: Add save/restore of D40_DREG_GCC on dma40 v3 or later, if that works.
144 */
145static __maybe_unused u32 d40_backup_regs[] = {
146 D40_DREG_LCPA,
147 D40_DREG_LCLA,
148 D40_DREG_PRMSE,
149 D40_DREG_PRMSO,
150 D40_DREG_PRMOE,
151 D40_DREG_PRMOO,
152};
153
154#define BACKUP_REGS_SZ ARRAY_SIZE(d40_backup_regs)
155
156/*
157 * since 9540 and 8540 has the same HW revision
158 * use v4a for 9540 or ealier
159 * use v4b for 8540 or later
160 * HW revision:
161 * DB8500ed has revision 0
162 * DB8500v1 has revision 2
163 * DB8500v2 has revision 3
164 * AP9540v1 has revision 4
165 * DB8540v1 has revision 4
166 * TODO: Check if all these registers have to be saved/restored on dma40 v4a
167 */
168static u32 d40_backup_regs_v4a[] = {
169 D40_DREG_PSEG1,
170 D40_DREG_PSEG2,
171 D40_DREG_PSEG3,
172 D40_DREG_PSEG4,
173 D40_DREG_PCEG1,
174 D40_DREG_PCEG2,
175 D40_DREG_PCEG3,
176 D40_DREG_PCEG4,
177 D40_DREG_RSEG1,
178 D40_DREG_RSEG2,
179 D40_DREG_RSEG3,
180 D40_DREG_RSEG4,
181 D40_DREG_RCEG1,
182 D40_DREG_RCEG2,
183 D40_DREG_RCEG3,
184 D40_DREG_RCEG4,
185};
186
187#define BACKUP_REGS_SZ_V4A ARRAY_SIZE(d40_backup_regs_v4a)
188
189static u32 d40_backup_regs_v4b[] = {
190 D40_DREG_CPSEG1,
191 D40_DREG_CPSEG2,
192 D40_DREG_CPSEG3,
193 D40_DREG_CPSEG4,
194 D40_DREG_CPSEG5,
195 D40_DREG_CPCEG1,
196 D40_DREG_CPCEG2,
197 D40_DREG_CPCEG3,
198 D40_DREG_CPCEG4,
199 D40_DREG_CPCEG5,
200 D40_DREG_CRSEG1,
201 D40_DREG_CRSEG2,
202 D40_DREG_CRSEG3,
203 D40_DREG_CRSEG4,
204 D40_DREG_CRSEG5,
205 D40_DREG_CRCEG1,
206 D40_DREG_CRCEG2,
207 D40_DREG_CRCEG3,
208 D40_DREG_CRCEG4,
209 D40_DREG_CRCEG5,
210};
211
212#define BACKUP_REGS_SZ_V4B ARRAY_SIZE(d40_backup_regs_v4b)
213
214static __maybe_unused u32 d40_backup_regs_chan[] = {
215 D40_CHAN_REG_SSCFG,
216 D40_CHAN_REG_SSELT,
217 D40_CHAN_REG_SSPTR,
218 D40_CHAN_REG_SSLNK,
219 D40_CHAN_REG_SDCFG,
220 D40_CHAN_REG_SDELT,
221 D40_CHAN_REG_SDPTR,
222 D40_CHAN_REG_SDLNK,
223};
224
225#define BACKUP_REGS_SZ_MAX ((BACKUP_REGS_SZ_V4A > BACKUP_REGS_SZ_V4B) ? \
226 BACKUP_REGS_SZ_V4A : BACKUP_REGS_SZ_V4B)
227
228/**
229 * struct d40_interrupt_lookup - lookup table for interrupt handler
230 *
231 * @src: Interrupt mask register.
232 * @clr: Interrupt clear register.
233 * @is_error: true if this is an error interrupt.
234 * @offset: start delta in the lookup_log_chans in d40_base. If equals to
235 * D40_PHY_CHAN, the lookup_phy_chans shall be used instead.
236 */
237struct d40_interrupt_lookup {
238 u32 src;
239 u32 clr;
240 bool is_error;
241 int offset;
242};
243
244
245static struct d40_interrupt_lookup il_v4a[] = {
246 {D40_DREG_LCTIS0, D40_DREG_LCICR0, false, 0},
247 {D40_DREG_LCTIS1, D40_DREG_LCICR1, false, 32},
248 {D40_DREG_LCTIS2, D40_DREG_LCICR2, false, 64},
249 {D40_DREG_LCTIS3, D40_DREG_LCICR3, false, 96},
250 {D40_DREG_LCEIS0, D40_DREG_LCICR0, true, 0},
251 {D40_DREG_LCEIS1, D40_DREG_LCICR1, true, 32},
252 {D40_DREG_LCEIS2, D40_DREG_LCICR2, true, 64},
253 {D40_DREG_LCEIS3, D40_DREG_LCICR3, true, 96},
254 {D40_DREG_PCTIS, D40_DREG_PCICR, false, D40_PHY_CHAN},
255 {D40_DREG_PCEIS, D40_DREG_PCICR, true, D40_PHY_CHAN},
256};
257
258static struct d40_interrupt_lookup il_v4b[] = {
259 {D40_DREG_CLCTIS1, D40_DREG_CLCICR1, false, 0},
260 {D40_DREG_CLCTIS2, D40_DREG_CLCICR2, false, 32},
261 {D40_DREG_CLCTIS3, D40_DREG_CLCICR3, false, 64},
262 {D40_DREG_CLCTIS4, D40_DREG_CLCICR4, false, 96},
263 {D40_DREG_CLCTIS5, D40_DREG_CLCICR5, false, 128},
264 {D40_DREG_CLCEIS1, D40_DREG_CLCICR1, true, 0},
265 {D40_DREG_CLCEIS2, D40_DREG_CLCICR2, true, 32},
266 {D40_DREG_CLCEIS3, D40_DREG_CLCICR3, true, 64},
267 {D40_DREG_CLCEIS4, D40_DREG_CLCICR4, true, 96},
268 {D40_DREG_CLCEIS5, D40_DREG_CLCICR5, true, 128},
269 {D40_DREG_CPCTIS, D40_DREG_CPCICR, false, D40_PHY_CHAN},
270 {D40_DREG_CPCEIS, D40_DREG_CPCICR, true, D40_PHY_CHAN},
271};
272
273/**
274 * struct d40_reg_val - simple lookup struct
275 *
276 * @reg: The register.
277 * @val: The value that belongs to the register in reg.
278 */
279struct d40_reg_val {
280 unsigned int reg;
281 unsigned int val;
282};
283
284static __initdata struct d40_reg_val dma_init_reg_v4a[] = {
285 /* Clock every part of the DMA block from start */
286 { .reg = D40_DREG_GCC, .val = D40_DREG_GCC_ENABLE_ALL},
287
288 /* Interrupts on all logical channels */
289 { .reg = D40_DREG_LCMIS0, .val = 0xFFFFFFFF},
290 { .reg = D40_DREG_LCMIS1, .val = 0xFFFFFFFF},
291 { .reg = D40_DREG_LCMIS2, .val = 0xFFFFFFFF},
292 { .reg = D40_DREG_LCMIS3, .val = 0xFFFFFFFF},
293 { .reg = D40_DREG_LCICR0, .val = 0xFFFFFFFF},
294 { .reg = D40_DREG_LCICR1, .val = 0xFFFFFFFF},
295 { .reg = D40_DREG_LCICR2, .val = 0xFFFFFFFF},
296 { .reg = D40_DREG_LCICR3, .val = 0xFFFFFFFF},
297 { .reg = D40_DREG_LCTIS0, .val = 0xFFFFFFFF},
298 { .reg = D40_DREG_LCTIS1, .val = 0xFFFFFFFF},
299 { .reg = D40_DREG_LCTIS2, .val = 0xFFFFFFFF},
300 { .reg = D40_DREG_LCTIS3, .val = 0xFFFFFFFF}
301};
302static __initdata struct d40_reg_val dma_init_reg_v4b[] = {
303 /* Clock every part of the DMA block from start */
304 { .reg = D40_DREG_GCC, .val = D40_DREG_GCC_ENABLE_ALL},
305
306 /* Interrupts on all logical channels */
307 { .reg = D40_DREG_CLCMIS1, .val = 0xFFFFFFFF},
308 { .reg = D40_DREG_CLCMIS2, .val = 0xFFFFFFFF},
309 { .reg = D40_DREG_CLCMIS3, .val = 0xFFFFFFFF},
310 { .reg = D40_DREG_CLCMIS4, .val = 0xFFFFFFFF},
311 { .reg = D40_DREG_CLCMIS5, .val = 0xFFFFFFFF},
312 { .reg = D40_DREG_CLCICR1, .val = 0xFFFFFFFF},
313 { .reg = D40_DREG_CLCICR2, .val = 0xFFFFFFFF},
314 { .reg = D40_DREG_CLCICR3, .val = 0xFFFFFFFF},
315 { .reg = D40_DREG_CLCICR4, .val = 0xFFFFFFFF},
316 { .reg = D40_DREG_CLCICR5, .val = 0xFFFFFFFF},
317 { .reg = D40_DREG_CLCTIS1, .val = 0xFFFFFFFF},
318 { .reg = D40_DREG_CLCTIS2, .val = 0xFFFFFFFF},
319 { .reg = D40_DREG_CLCTIS3, .val = 0xFFFFFFFF},
320 { .reg = D40_DREG_CLCTIS4, .val = 0xFFFFFFFF},
321 { .reg = D40_DREG_CLCTIS5, .val = 0xFFFFFFFF}
322};
323
324/**
325 * struct d40_lli_pool - Structure for keeping LLIs in memory
326 *
327 * @base: Pointer to memory area when the pre_alloc_lli's are not large
328 * enough, IE bigger than the most common case, 1 dst and 1 src. NULL if
329 * pre_alloc_lli is used.
330 * @dma_addr: DMA address, if mapped
331 * @size: The size in bytes of the memory at base or the size of pre_alloc_lli.
332 * @pre_alloc_lli: Pre allocated area for the most common case of transfers,
333 * one buffer to one buffer.
334 */
335struct d40_lli_pool {
336 void *base;
337 int size;
338 dma_addr_t dma_addr;
339 /* Space for dst and src, plus an extra for padding */
340 u8 pre_alloc_lli[3 * sizeof(struct d40_phy_lli)];
341};
342
343/**
344 * struct d40_desc - A descriptor is one DMA job.
345 *
346 * @lli_phy: LLI settings for physical channel. Both src and dst=
347 * points into the lli_pool, to base if lli_len > 1 or to pre_alloc_lli if
348 * lli_len equals one.
349 * @lli_log: Same as above but for logical channels.
350 * @lli_pool: The pool with two entries pre-allocated.
351 * @lli_len: Number of llis of current descriptor.
352 * @lli_current: Number of transferred llis.
353 * @lcla_alloc: Number of LCLA entries allocated.
354 * @txd: DMA engine struct. Used for among other things for communication
355 * during a transfer.
356 * @node: List entry.
357 * @is_in_client_list: true if the client owns this descriptor.
358 * @cyclic: true if this is a cyclic job
359 *
360 * This descriptor is used for both logical and physical transfers.
361 */
362struct d40_desc {
363 /* LLI physical */
364 struct d40_phy_lli_bidir lli_phy;
365 /* LLI logical */
366 struct d40_log_lli_bidir lli_log;
367
368 struct d40_lli_pool lli_pool;
369 int lli_len;
370 int lli_current;
371 int lcla_alloc;
372
373 struct dma_async_tx_descriptor txd;
374 struct list_head node;
375
376 bool is_in_client_list;
377 bool cyclic;
378};
379
380/**
381 * struct d40_lcla_pool - LCLA pool settings and data.
382 *
383 * @base: The virtual address of LCLA. 18 bit aligned.
384 * @dma_addr: DMA address, if mapped
385 * @base_unaligned: The orignal kmalloc pointer, if kmalloc is used.
386 * This pointer is only there for clean-up on error.
387 * @pages: The number of pages needed for all physical channels.
388 * Only used later for clean-up on error
389 * @lock: Lock to protect the content in this struct.
390 * @alloc_map: big map over which LCLA entry is own by which job.
391 */
392struct d40_lcla_pool {
393 void *base;
394 dma_addr_t dma_addr;
395 void *base_unaligned;
396 int pages;
397 spinlock_t lock;
398 struct d40_desc **alloc_map;
399};
400
401/**
402 * struct d40_phy_res - struct for handling eventlines mapped to physical
403 * channels.
404 *
405 * @lock: A lock protection this entity.
406 * @reserved: True if used by secure world or otherwise.
407 * @num: The physical channel number of this entity.
408 * @allocated_src: Bit mapped to show which src event line's are mapped to
409 * this physical channel. Can also be free or physically allocated.
410 * @allocated_dst: Same as for src but is dst.
411 * allocated_dst and allocated_src uses the D40_ALLOC* defines as well as
412 * event line number.
413 * @use_soft_lli: To mark if the linked lists of channel are managed by SW.
414 */
415struct d40_phy_res {
416 spinlock_t lock;
417 bool reserved;
418 int num;
419 u32 allocated_src;
420 u32 allocated_dst;
421 bool use_soft_lli;
422};
423
424struct d40_base;
425
426/**
427 * struct d40_chan - Struct that describes a channel.
428 *
429 * @lock: A spinlock to protect this struct.
430 * @log_num: The logical number, if any of this channel.
431 * @pending_tx: The number of pending transfers. Used between interrupt handler
432 * and tasklet.
433 * @busy: Set to true when transfer is ongoing on this channel.
434 * @phy_chan: Pointer to physical channel which this instance runs on. If this
435 * point is NULL, then the channel is not allocated.
436 * @chan: DMA engine handle.
437 * @tasklet: Tasklet that gets scheduled from interrupt context to complete a
438 * transfer and call client callback.
439 * @client: Cliented owned descriptor list.
440 * @pending_queue: Submitted jobs, to be issued by issue_pending()
441 * @active: Active descriptor.
442 * @done: Completed jobs
443 * @queue: Queued jobs.
444 * @prepare_queue: Prepared jobs.
445 * @dma_cfg: The client configuration of this dma channel.
446 * @slave_config: DMA slave configuration.
447 * @configured: whether the dma_cfg configuration is valid
448 * @base: Pointer to the device instance struct.
449 * @src_def_cfg: Default cfg register setting for src.
450 * @dst_def_cfg: Default cfg register setting for dst.
451 * @log_def: Default logical channel settings.
452 * @lcpa: Pointer to dst and src lcpa settings.
453 * @runtime_addr: runtime configured address.
454 * @runtime_direction: runtime configured direction.
455 *
456 * This struct can either "be" a logical or a physical channel.
457 */
458struct d40_chan {
459 spinlock_t lock;
460 int log_num;
461 int pending_tx;
462 bool busy;
463 struct d40_phy_res *phy_chan;
464 struct dma_chan chan;
465 struct tasklet_struct tasklet;
466 struct list_head client;
467 struct list_head pending_queue;
468 struct list_head active;
469 struct list_head done;
470 struct list_head queue;
471 struct list_head prepare_queue;
472 struct stedma40_chan_cfg dma_cfg;
473 struct dma_slave_config slave_config;
474 bool configured;
475 struct d40_base *base;
476 /* Default register configurations */
477 u32 src_def_cfg;
478 u32 dst_def_cfg;
479 struct d40_def_lcsp log_def;
480 struct d40_log_lli_full *lcpa;
481 /* Runtime reconfiguration */
482 dma_addr_t runtime_addr;
483 enum dma_transfer_direction runtime_direction;
484};
485
486/**
487 * struct d40_gen_dmac - generic values to represent u8500/u8540 DMA
488 * controller
489 *
490 * @backup: the pointer to the registers address array for backup
491 * @backup_size: the size of the registers address array for backup
492 * @realtime_en: the realtime enable register
493 * @realtime_clear: the realtime clear register
494 * @high_prio_en: the high priority enable register
495 * @high_prio_clear: the high priority clear register
496 * @interrupt_en: the interrupt enable register
497 * @interrupt_clear: the interrupt clear register
498 * @il: the pointer to struct d40_interrupt_lookup
499 * @il_size: the size of d40_interrupt_lookup array
500 * @init_reg: the pointer to the struct d40_reg_val
501 * @init_reg_size: the size of d40_reg_val array
502 */
503struct d40_gen_dmac {
504 u32 *backup;
505 u32 backup_size;
506 u32 realtime_en;
507 u32 realtime_clear;
508 u32 high_prio_en;
509 u32 high_prio_clear;
510 u32 interrupt_en;
511 u32 interrupt_clear;
512 struct d40_interrupt_lookup *il;
513 u32 il_size;
514 struct d40_reg_val *init_reg;
515 u32 init_reg_size;
516};
517
518/**
519 * struct d40_base - The big global struct, one for each probe'd instance.
520 *
521 * @interrupt_lock: Lock used to make sure one interrupt is handle a time.
522 * @execmd_lock: Lock for execute command usage since several channels share
523 * the same physical register.
524 * @dev: The device structure.
525 * @virtbase: The virtual base address of the DMA's register.
526 * @rev: silicon revision detected.
527 * @clk: Pointer to the DMA clock structure.
528 * @phy_start: Physical memory start of the DMA registers.
529 * @phy_size: Size of the DMA register map.
530 * @irq: The IRQ number.
531 * @num_memcpy_chans: The number of channels used for memcpy (mem-to-mem
532 * transfers).
533 * @num_phy_chans: The number of physical channels. Read from HW. This
534 * is the number of available channels for this driver, not counting "Secure
535 * mode" allocated physical channels.
536 * @num_log_chans: The number of logical channels. Calculated from
537 * num_phy_chans.
538 * @dma_both: dma_device channels that can do both memcpy and slave transfers.
539 * @dma_slave: dma_device channels that can do only do slave transfers.
540 * @dma_memcpy: dma_device channels that can do only do memcpy transfers.
541 * @phy_chans: Room for all possible physical channels in system.
542 * @log_chans: Room for all possible logical channels in system.
543 * @lookup_log_chans: Used to map interrupt number to logical channel. Points
544 * to log_chans entries.
545 * @lookup_phy_chans: Used to map interrupt number to physical channel. Points
546 * to phy_chans entries.
547 * @plat_data: Pointer to provided platform_data which is the driver
548 * configuration.
549 * @lcpa_regulator: Pointer to hold the regulator for the esram bank for lcla.
550 * @phy_res: Vector containing all physical channels.
551 * @lcla_pool: lcla pool settings and data.
552 * @lcpa_base: The virtual mapped address of LCPA.
553 * @phy_lcpa: The physical address of the LCPA.
554 * @lcpa_size: The size of the LCPA area.
555 * @desc_slab: cache for descriptors.
556 * @reg_val_backup: Here the values of some hardware registers are stored
557 * before the DMA is powered off. They are restored when the power is back on.
558 * @reg_val_backup_v4: Backup of registers that only exits on dma40 v3 and
559 * later
560 * @reg_val_backup_chan: Backup data for standard channel parameter registers.
561 * @regs_interrupt: Scratch space for registers during interrupt.
562 * @gcc_pwr_off_mask: Mask to maintain the channels that can be turned off.
563 * @gen_dmac: the struct for generic registers values to represent u8500/8540
564 * DMA controller
565 */
566struct d40_base {
567 spinlock_t interrupt_lock;
568 spinlock_t execmd_lock;
569 struct device *dev;
570 void __iomem *virtbase;
571 u8 rev:4;
572 struct clk *clk;
573 phys_addr_t phy_start;
574 resource_size_t phy_size;
575 int irq;
576 int num_memcpy_chans;
577 int num_phy_chans;
578 int num_log_chans;
579 struct dma_device dma_both;
580 struct dma_device dma_slave;
581 struct dma_device dma_memcpy;
582 struct d40_chan *phy_chans;
583 struct d40_chan *log_chans;
584 struct d40_chan **lookup_log_chans;
585 struct d40_chan **lookup_phy_chans;
586 struct stedma40_platform_data *plat_data;
587 struct regulator *lcpa_regulator;
588 /* Physical half channels */
589 struct d40_phy_res *phy_res;
590 struct d40_lcla_pool lcla_pool;
591 void *lcpa_base;
592 dma_addr_t phy_lcpa;
593 resource_size_t lcpa_size;
594 struct kmem_cache *desc_slab;
595 u32 reg_val_backup[BACKUP_REGS_SZ];
596 u32 reg_val_backup_v4[BACKUP_REGS_SZ_MAX];
597 u32 *reg_val_backup_chan;
598 u32 *regs_interrupt;
599 u16 gcc_pwr_off_mask;
600 struct d40_gen_dmac gen_dmac;
601};
602
603static struct device *chan2dev(struct d40_chan *d40c)
604{
605 return &d40c->chan.dev->device;
606}
607
608static bool chan_is_physical(struct d40_chan *chan)
609{
610 return chan->log_num == D40_PHY_CHAN;
611}
612
613static bool chan_is_logical(struct d40_chan *chan)
614{
615 return !chan_is_physical(chan);
616}
617
618static void __iomem *chan_base(struct d40_chan *chan)
619{
620 return chan->base->virtbase + D40_DREG_PCBASE +
621 chan->phy_chan->num * D40_DREG_PCDELTA;
622}
623
624#define d40_err(dev, format, arg...) \
625 dev_err(dev, "[%s] " format, __func__, ## arg)
626
627#define chan_err(d40c, format, arg...) \
628 d40_err(chan2dev(d40c), format, ## arg)
629
630static int d40_set_runtime_config_write(struct dma_chan *chan,
631 struct dma_slave_config *config,
632 enum dma_transfer_direction direction);
633
634static int d40_pool_lli_alloc(struct d40_chan *d40c, struct d40_desc *d40d,
635 int lli_len)
636{
637 bool is_log = chan_is_logical(d40c);
638 u32 align;
639 void *base;
640
641 if (is_log)
642 align = sizeof(struct d40_log_lli);
643 else
644 align = sizeof(struct d40_phy_lli);
645
646 if (lli_len == 1) {
647 base = d40d->lli_pool.pre_alloc_lli;
648 d40d->lli_pool.size = sizeof(d40d->lli_pool.pre_alloc_lli);
649 d40d->lli_pool.base = NULL;
650 } else {
651 d40d->lli_pool.size = lli_len * 2 * align;
652
653 base = kmalloc(d40d->lli_pool.size + align, GFP_NOWAIT);
654 d40d->lli_pool.base = base;
655
656 if (d40d->lli_pool.base == NULL)
657 return -ENOMEM;
658 }
659
660 if (is_log) {
661 d40d->lli_log.src = PTR_ALIGN(base, align);
662 d40d->lli_log.dst = d40d->lli_log.src + lli_len;
663
664 d40d->lli_pool.dma_addr = 0;
665 } else {
666 d40d->lli_phy.src = PTR_ALIGN(base, align);
667 d40d->lli_phy.dst = d40d->lli_phy.src + lli_len;
668
669 d40d->lli_pool.dma_addr = dma_map_single(d40c->base->dev,
670 d40d->lli_phy.src,
671 d40d->lli_pool.size,
672 DMA_TO_DEVICE);
673
674 if (dma_mapping_error(d40c->base->dev,
675 d40d->lli_pool.dma_addr)) {
676 kfree(d40d->lli_pool.base);
677 d40d->lli_pool.base = NULL;
678 d40d->lli_pool.dma_addr = 0;
679 return -ENOMEM;
680 }
681 }
682
683 return 0;
684}
685
686static void d40_pool_lli_free(struct d40_chan *d40c, struct d40_desc *d40d)
687{
688 if (d40d->lli_pool.dma_addr)
689 dma_unmap_single(d40c->base->dev, d40d->lli_pool.dma_addr,
690 d40d->lli_pool.size, DMA_TO_DEVICE);
691
692 kfree(d40d->lli_pool.base);
693 d40d->lli_pool.base = NULL;
694 d40d->lli_pool.size = 0;
695 d40d->lli_log.src = NULL;
696 d40d->lli_log.dst = NULL;
697 d40d->lli_phy.src = NULL;
698 d40d->lli_phy.dst = NULL;
699}
700
701static int d40_lcla_alloc_one(struct d40_chan *d40c,
702 struct d40_desc *d40d)
703{
704 unsigned long flags;
705 int i;
706 int ret = -EINVAL;
707
708 spin_lock_irqsave(&d40c->base->lcla_pool.lock, flags);
709
710 /*
711 * Allocate both src and dst at the same time, therefore the half
712 * start on 1 since 0 can't be used since zero is used as end marker.
713 */
714 for (i = 1 ; i < D40_LCLA_LINK_PER_EVENT_GRP / 2; i++) {
715 int idx = d40c->phy_chan->num * D40_LCLA_LINK_PER_EVENT_GRP + i;
716
717 if (!d40c->base->lcla_pool.alloc_map[idx]) {
718 d40c->base->lcla_pool.alloc_map[idx] = d40d;
719 d40d->lcla_alloc++;
720 ret = i;
721 break;
722 }
723 }
724
725 spin_unlock_irqrestore(&d40c->base->lcla_pool.lock, flags);
726
727 return ret;
728}
729
730static int d40_lcla_free_all(struct d40_chan *d40c,
731 struct d40_desc *d40d)
732{
733 unsigned long flags;
734 int i;
735 int ret = -EINVAL;
736
737 if (chan_is_physical(d40c))
738 return 0;
739
740 spin_lock_irqsave(&d40c->base->lcla_pool.lock, flags);
741
742 for (i = 1 ; i < D40_LCLA_LINK_PER_EVENT_GRP / 2; i++) {
743 int idx = d40c->phy_chan->num * D40_LCLA_LINK_PER_EVENT_GRP + i;
744
745 if (d40c->base->lcla_pool.alloc_map[idx] == d40d) {
746 d40c->base->lcla_pool.alloc_map[idx] = NULL;
747 d40d->lcla_alloc--;
748 if (d40d->lcla_alloc == 0) {
749 ret = 0;
750 break;
751 }
752 }
753 }
754
755 spin_unlock_irqrestore(&d40c->base->lcla_pool.lock, flags);
756
757 return ret;
758
759}
760
761static void d40_desc_remove(struct d40_desc *d40d)
762{
763 list_del(&d40d->node);
764}
765
766static struct d40_desc *d40_desc_get(struct d40_chan *d40c)
767{
768 struct d40_desc *desc = NULL;
769
770 if (!list_empty(&d40c->client)) {
771 struct d40_desc *d;
772 struct d40_desc *_d;
773
774 list_for_each_entry_safe(d, _d, &d40c->client, node) {
775 if (async_tx_test_ack(&d->txd)) {
776 d40_desc_remove(d);
777 desc = d;
778 memset(desc, 0, sizeof(*desc));
779 break;
780 }
781 }
782 }
783
784 if (!desc)
785 desc = kmem_cache_zalloc(d40c->base->desc_slab, GFP_NOWAIT);
786
787 if (desc)
788 INIT_LIST_HEAD(&desc->node);
789
790 return desc;
791}
792
793static void d40_desc_free(struct d40_chan *d40c, struct d40_desc *d40d)
794{
795
796 d40_pool_lli_free(d40c, d40d);
797 d40_lcla_free_all(d40c, d40d);
798 kmem_cache_free(d40c->base->desc_slab, d40d);
799}
800
801static void d40_desc_submit(struct d40_chan *d40c, struct d40_desc *desc)
802{
803 list_add_tail(&desc->node, &d40c->active);
804}
805
806static void d40_phy_lli_load(struct d40_chan *chan, struct d40_desc *desc)
807{
808 struct d40_phy_lli *lli_dst = desc->lli_phy.dst;
809 struct d40_phy_lli *lli_src = desc->lli_phy.src;
810 void __iomem *base = chan_base(chan);
811
812 writel(lli_src->reg_cfg, base + D40_CHAN_REG_SSCFG);
813 writel(lli_src->reg_elt, base + D40_CHAN_REG_SSELT);
814 writel(lli_src->reg_ptr, base + D40_CHAN_REG_SSPTR);
815 writel(lli_src->reg_lnk, base + D40_CHAN_REG_SSLNK);
816
817 writel(lli_dst->reg_cfg, base + D40_CHAN_REG_SDCFG);
818 writel(lli_dst->reg_elt, base + D40_CHAN_REG_SDELT);
819 writel(lli_dst->reg_ptr, base + D40_CHAN_REG_SDPTR);
820 writel(lli_dst->reg_lnk, base + D40_CHAN_REG_SDLNK);
821}
822
823static void d40_desc_done(struct d40_chan *d40c, struct d40_desc *desc)
824{
825 list_add_tail(&desc->node, &d40c->done);
826}
827
828static void d40_log_lli_to_lcxa(struct d40_chan *chan, struct d40_desc *desc)
829{
830 struct d40_lcla_pool *pool = &chan->base->lcla_pool;
831 struct d40_log_lli_bidir *lli = &desc->lli_log;
832 int lli_current = desc->lli_current;
833 int lli_len = desc->lli_len;
834 bool cyclic = desc->cyclic;
835 int curr_lcla = -EINVAL;
836 int first_lcla = 0;
837 bool use_esram_lcla = chan->base->plat_data->use_esram_lcla;
838 bool linkback;
839
840 /*
841 * We may have partially running cyclic transfers, in case we did't get
842 * enough LCLA entries.
843 */
844 linkback = cyclic && lli_current == 0;
845
846 /*
847 * For linkback, we need one LCLA even with only one link, because we
848 * can't link back to the one in LCPA space
849 */
850 if (linkback || (lli_len - lli_current > 1)) {
851 /*
852 * If the channel is expected to use only soft_lli don't
853 * allocate a lcla. This is to avoid a HW issue that exists
854 * in some controller during a peripheral to memory transfer
855 * that uses linked lists.
856 */
857 if (!(chan->phy_chan->use_soft_lli &&
858 chan->dma_cfg.dir == DMA_DEV_TO_MEM))
859 curr_lcla = d40_lcla_alloc_one(chan, desc);
860
861 first_lcla = curr_lcla;
862 }
863
864 /*
865 * For linkback, we normally load the LCPA in the loop since we need to
866 * link it to the second LCLA and not the first. However, if we
867 * couldn't even get a first LCLA, then we have to run in LCPA and
868 * reload manually.
869 */
870 if (!linkback || curr_lcla == -EINVAL) {
871 unsigned int flags = 0;
872
873 if (curr_lcla == -EINVAL)
874 flags |= LLI_TERM_INT;
875
876 d40_log_lli_lcpa_write(chan->lcpa,
877 &lli->dst[lli_current],
878 &lli->src[lli_current],
879 curr_lcla,
880 flags);
881 lli_current++;
882 }
883
884 if (curr_lcla < 0)
885 goto set_current;
886
887 for (; lli_current < lli_len; lli_current++) {
888 unsigned int lcla_offset = chan->phy_chan->num * 1024 +
889 8 * curr_lcla * 2;
890 struct d40_log_lli *lcla = pool->base + lcla_offset;
891 unsigned int flags = 0;
892 int next_lcla;
893
894 if (lli_current + 1 < lli_len)
895 next_lcla = d40_lcla_alloc_one(chan, desc);
896 else
897 next_lcla = linkback ? first_lcla : -EINVAL;
898
899 if (cyclic || next_lcla == -EINVAL)
900 flags |= LLI_TERM_INT;
901
902 if (linkback && curr_lcla == first_lcla) {
903 /* First link goes in both LCPA and LCLA */
904 d40_log_lli_lcpa_write(chan->lcpa,
905 &lli->dst[lli_current],
906 &lli->src[lli_current],
907 next_lcla, flags);
908 }
909
910 /*
911 * One unused LCLA in the cyclic case if the very first
912 * next_lcla fails...
913 */
914 d40_log_lli_lcla_write(lcla,
915 &lli->dst[lli_current],
916 &lli->src[lli_current],
917 next_lcla, flags);
918
919 /*
920 * Cache maintenance is not needed if lcla is
921 * mapped in esram
922 */
923 if (!use_esram_lcla) {
924 dma_sync_single_range_for_device(chan->base->dev,
925 pool->dma_addr, lcla_offset,
926 2 * sizeof(struct d40_log_lli),
927 DMA_TO_DEVICE);
928 }
929 curr_lcla = next_lcla;
930
931 if (curr_lcla == -EINVAL || curr_lcla == first_lcla) {
932 lli_current++;
933 break;
934 }
935 }
936 set_current:
937 desc->lli_current = lli_current;
938}
939
940static void d40_desc_load(struct d40_chan *d40c, struct d40_desc *d40d)
941{
942 if (chan_is_physical(d40c)) {
943 d40_phy_lli_load(d40c, d40d);
944 d40d->lli_current = d40d->lli_len;
945 } else
946 d40_log_lli_to_lcxa(d40c, d40d);
947}
948
949static struct d40_desc *d40_first_active_get(struct d40_chan *d40c)
950{
951 return list_first_entry_or_null(&d40c->active, struct d40_desc, node);
952}
953
954/* remove desc from current queue and add it to the pending_queue */
955static void d40_desc_queue(struct d40_chan *d40c, struct d40_desc *desc)
956{
957 d40_desc_remove(desc);
958 desc->is_in_client_list = false;
959 list_add_tail(&desc->node, &d40c->pending_queue);
960}
961
962static struct d40_desc *d40_first_pending(struct d40_chan *d40c)
963{
964 return list_first_entry_or_null(&d40c->pending_queue, struct d40_desc,
965 node);
966}
967
968static struct d40_desc *d40_first_queued(struct d40_chan *d40c)
969{
970 return list_first_entry_or_null(&d40c->queue, struct d40_desc, node);
971}
972
973static struct d40_desc *d40_first_done(struct d40_chan *d40c)
974{
975 return list_first_entry_or_null(&d40c->done, struct d40_desc, node);
976}
977
978static int d40_psize_2_burst_size(bool is_log, int psize)
979{
980 if (is_log) {
981 if (psize == STEDMA40_PSIZE_LOG_1)
982 return 1;
983 } else {
984 if (psize == STEDMA40_PSIZE_PHY_1)
985 return 1;
986 }
987
988 return 2 << psize;
989}
990
991/*
992 * The dma only supports transmitting packages up to
993 * STEDMA40_MAX_SEG_SIZE * data_width, where data_width is stored in Bytes.
994 *
995 * Calculate the total number of dma elements required to send the entire sg list.
996 */
997static int d40_size_2_dmalen(int size, u32 data_width1, u32 data_width2)
998{
999 int dmalen;
1000 u32 max_w = max(data_width1, data_width2);
1001 u32 min_w = min(data_width1, data_width2);
1002 u32 seg_max = ALIGN(STEDMA40_MAX_SEG_SIZE * min_w, max_w);
1003
1004 if (seg_max > STEDMA40_MAX_SEG_SIZE)
1005 seg_max -= max_w;
1006
1007 if (!IS_ALIGNED(size, max_w))
1008 return -EINVAL;
1009
1010 if (size <= seg_max)
1011 dmalen = 1;
1012 else {
1013 dmalen = size / seg_max;
1014 if (dmalen * seg_max < size)
1015 dmalen++;
1016 }
1017 return dmalen;
1018}
1019
1020static int d40_sg_2_dmalen(struct scatterlist *sgl, int sg_len,
1021 u32 data_width1, u32 data_width2)
1022{
1023 struct scatterlist *sg;
1024 int i;
1025 int len = 0;
1026 int ret;
1027
1028 for_each_sg(sgl, sg, sg_len, i) {
1029 ret = d40_size_2_dmalen(sg_dma_len(sg),
1030 data_width1, data_width2);
1031 if (ret < 0)
1032 return ret;
1033 len += ret;
1034 }
1035 return len;
1036}
1037
1038static int __d40_execute_command_phy(struct d40_chan *d40c,
1039 enum d40_command command)
1040{
1041 u32 status;
1042 int i;
1043 void __iomem *active_reg;
1044 int ret = 0;
1045 unsigned long flags;
1046 u32 wmask;
1047
1048 if (command == D40_DMA_STOP) {
1049 ret = __d40_execute_command_phy(d40c, D40_DMA_SUSPEND_REQ);
1050 if (ret)
1051 return ret;
1052 }
1053
1054 spin_lock_irqsave(&d40c->base->execmd_lock, flags);
1055
1056 if (d40c->phy_chan->num % 2 == 0)
1057 active_reg = d40c->base->virtbase + D40_DREG_ACTIVE;
1058 else
1059 active_reg = d40c->base->virtbase + D40_DREG_ACTIVO;
1060
1061 if (command == D40_DMA_SUSPEND_REQ) {
1062 status = (readl(active_reg) &
1063 D40_CHAN_POS_MASK(d40c->phy_chan->num)) >>
1064 D40_CHAN_POS(d40c->phy_chan->num);
1065
1066 if (status == D40_DMA_SUSPENDED || status == D40_DMA_STOP)
1067 goto unlock;
1068 }
1069
1070 wmask = 0xffffffff & ~(D40_CHAN_POS_MASK(d40c->phy_chan->num));
1071 writel(wmask | (command << D40_CHAN_POS(d40c->phy_chan->num)),
1072 active_reg);
1073
1074 if (command == D40_DMA_SUSPEND_REQ) {
1075
1076 for (i = 0 ; i < D40_SUSPEND_MAX_IT; i++) {
1077 status = (readl(active_reg) &
1078 D40_CHAN_POS_MASK(d40c->phy_chan->num)) >>
1079 D40_CHAN_POS(d40c->phy_chan->num);
1080
1081 cpu_relax();
1082 /*
1083 * Reduce the number of bus accesses while
1084 * waiting for the DMA to suspend.
1085 */
1086 udelay(3);
1087
1088 if (status == D40_DMA_STOP ||
1089 status == D40_DMA_SUSPENDED)
1090 break;
1091 }
1092
1093 if (i == D40_SUSPEND_MAX_IT) {
1094 chan_err(d40c,
1095 "unable to suspend the chl %d (log: %d) status %x\n",
1096 d40c->phy_chan->num, d40c->log_num,
1097 status);
1098 dump_stack();
1099 ret = -EBUSY;
1100 }
1101
1102 }
1103 unlock:
1104 spin_unlock_irqrestore(&d40c->base->execmd_lock, flags);
1105 return ret;
1106}
1107
1108static void d40_term_all(struct d40_chan *d40c)
1109{
1110 struct d40_desc *d40d;
1111 struct d40_desc *_d;
1112
1113 /* Release completed descriptors */
1114 while ((d40d = d40_first_done(d40c))) {
1115 d40_desc_remove(d40d);
1116 d40_desc_free(d40c, d40d);
1117 }
1118
1119 /* Release active descriptors */
1120 while ((d40d = d40_first_active_get(d40c))) {
1121 d40_desc_remove(d40d);
1122 d40_desc_free(d40c, d40d);
1123 }
1124
1125 /* Release queued descriptors waiting for transfer */
1126 while ((d40d = d40_first_queued(d40c))) {
1127 d40_desc_remove(d40d);
1128 d40_desc_free(d40c, d40d);
1129 }
1130
1131 /* Release pending descriptors */
1132 while ((d40d = d40_first_pending(d40c))) {
1133 d40_desc_remove(d40d);
1134 d40_desc_free(d40c, d40d);
1135 }
1136
1137 /* Release client owned descriptors */
1138 if (!list_empty(&d40c->client))
1139 list_for_each_entry_safe(d40d, _d, &d40c->client, node) {
1140 d40_desc_remove(d40d);
1141 d40_desc_free(d40c, d40d);
1142 }
1143
1144 /* Release descriptors in prepare queue */
1145 if (!list_empty(&d40c->prepare_queue))
1146 list_for_each_entry_safe(d40d, _d,
1147 &d40c->prepare_queue, node) {
1148 d40_desc_remove(d40d);
1149 d40_desc_free(d40c, d40d);
1150 }
1151
1152 d40c->pending_tx = 0;
1153}
1154
1155static void __d40_config_set_event(struct d40_chan *d40c,
1156 enum d40_events event_type, u32 event,
1157 int reg)
1158{
1159 void __iomem *addr = chan_base(d40c) + reg;
1160 int tries;
1161 u32 status;
1162
1163 switch (event_type) {
1164
1165 case D40_DEACTIVATE_EVENTLINE:
1166
1167 writel((D40_DEACTIVATE_EVENTLINE << D40_EVENTLINE_POS(event))
1168 | ~D40_EVENTLINE_MASK(event), addr);
1169 break;
1170
1171 case D40_SUSPEND_REQ_EVENTLINE:
1172 status = (readl(addr) & D40_EVENTLINE_MASK(event)) >>
1173 D40_EVENTLINE_POS(event);
1174
1175 if (status == D40_DEACTIVATE_EVENTLINE ||
1176 status == D40_SUSPEND_REQ_EVENTLINE)
1177 break;
1178
1179 writel((D40_SUSPEND_REQ_EVENTLINE << D40_EVENTLINE_POS(event))
1180 | ~D40_EVENTLINE_MASK(event), addr);
1181
1182 for (tries = 0 ; tries < D40_SUSPEND_MAX_IT; tries++) {
1183
1184 status = (readl(addr) & D40_EVENTLINE_MASK(event)) >>
1185 D40_EVENTLINE_POS(event);
1186
1187 cpu_relax();
1188 /*
1189 * Reduce the number of bus accesses while
1190 * waiting for the DMA to suspend.
1191 */
1192 udelay(3);
1193
1194 if (status == D40_DEACTIVATE_EVENTLINE)
1195 break;
1196 }
1197
1198 if (tries == D40_SUSPEND_MAX_IT) {
1199 chan_err(d40c,
1200 "unable to stop the event_line chl %d (log: %d)"
1201 "status %x\n", d40c->phy_chan->num,
1202 d40c->log_num, status);
1203 }
1204 break;
1205
1206 case D40_ACTIVATE_EVENTLINE:
1207 /*
1208 * The hardware sometimes doesn't register the enable when src and dst
1209 * event lines are active on the same logical channel. Retry to ensure
1210 * it does. Usually only one retry is sufficient.
1211 */
1212 tries = 100;
1213 while (--tries) {
1214 writel((D40_ACTIVATE_EVENTLINE <<
1215 D40_EVENTLINE_POS(event)) |
1216 ~D40_EVENTLINE_MASK(event), addr);
1217
1218 if (readl(addr) & D40_EVENTLINE_MASK(event))
1219 break;
1220 }
1221
1222 if (tries != 99)
1223 dev_dbg(chan2dev(d40c),
1224 "[%s] workaround enable S%cLNK (%d tries)\n",
1225 __func__, reg == D40_CHAN_REG_SSLNK ? 'S' : 'D',
1226 100 - tries);
1227
1228 WARN_ON(!tries);
1229 break;
1230
1231 case D40_ROUND_EVENTLINE:
1232 BUG();
1233 break;
1234
1235 }
1236}
1237
1238static void d40_config_set_event(struct d40_chan *d40c,
1239 enum d40_events event_type)
1240{
1241 u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dev_type);
1242
1243 /* Enable event line connected to device (or memcpy) */
1244 if ((d40c->dma_cfg.dir == DMA_DEV_TO_MEM) ||
1245 (d40c->dma_cfg.dir == DMA_DEV_TO_DEV))
1246 __d40_config_set_event(d40c, event_type, event,
1247 D40_CHAN_REG_SSLNK);
1248
1249 if (d40c->dma_cfg.dir != DMA_DEV_TO_MEM)
1250 __d40_config_set_event(d40c, event_type, event,
1251 D40_CHAN_REG_SDLNK);
1252}
1253
1254static u32 d40_chan_has_events(struct d40_chan *d40c)
1255{
1256 void __iomem *chanbase = chan_base(d40c);
1257 u32 val;
1258
1259 val = readl(chanbase + D40_CHAN_REG_SSLNK);
1260 val |= readl(chanbase + D40_CHAN_REG_SDLNK);
1261
1262 return val;
1263}
1264
1265static int
1266__d40_execute_command_log(struct d40_chan *d40c, enum d40_command command)
1267{
1268 unsigned long flags;
1269 int ret = 0;
1270 u32 active_status;
1271 void __iomem *active_reg;
1272
1273 if (d40c->phy_chan->num % 2 == 0)
1274 active_reg = d40c->base->virtbase + D40_DREG_ACTIVE;
1275 else
1276 active_reg = d40c->base->virtbase + D40_DREG_ACTIVO;
1277
1278
1279 spin_lock_irqsave(&d40c->phy_chan->lock, flags);
1280
1281 switch (command) {
1282 case D40_DMA_STOP:
1283 case D40_DMA_SUSPEND_REQ:
1284
1285 active_status = (readl(active_reg) &
1286 D40_CHAN_POS_MASK(d40c->phy_chan->num)) >>
1287 D40_CHAN_POS(d40c->phy_chan->num);
1288
1289 if (active_status == D40_DMA_RUN)
1290 d40_config_set_event(d40c, D40_SUSPEND_REQ_EVENTLINE);
1291 else
1292 d40_config_set_event(d40c, D40_DEACTIVATE_EVENTLINE);
1293
1294 if (!d40_chan_has_events(d40c) && (command == D40_DMA_STOP))
1295 ret = __d40_execute_command_phy(d40c, command);
1296
1297 break;
1298
1299 case D40_DMA_RUN:
1300
1301 d40_config_set_event(d40c, D40_ACTIVATE_EVENTLINE);
1302 ret = __d40_execute_command_phy(d40c, command);
1303 break;
1304
1305 case D40_DMA_SUSPENDED:
1306 BUG();
1307 break;
1308 }
1309
1310 spin_unlock_irqrestore(&d40c->phy_chan->lock, flags);
1311 return ret;
1312}
1313
1314static int d40_channel_execute_command(struct d40_chan *d40c,
1315 enum d40_command command)
1316{
1317 if (chan_is_logical(d40c))
1318 return __d40_execute_command_log(d40c, command);
1319 else
1320 return __d40_execute_command_phy(d40c, command);
1321}
1322
1323static u32 d40_get_prmo(struct d40_chan *d40c)
1324{
1325 static const unsigned int phy_map[] = {
1326 [STEDMA40_PCHAN_BASIC_MODE]
1327 = D40_DREG_PRMO_PCHAN_BASIC,
1328 [STEDMA40_PCHAN_MODULO_MODE]
1329 = D40_DREG_PRMO_PCHAN_MODULO,
1330 [STEDMA40_PCHAN_DOUBLE_DST_MODE]
1331 = D40_DREG_PRMO_PCHAN_DOUBLE_DST,
1332 };
1333 static const unsigned int log_map[] = {
1334 [STEDMA40_LCHAN_SRC_PHY_DST_LOG]
1335 = D40_DREG_PRMO_LCHAN_SRC_PHY_DST_LOG,
1336 [STEDMA40_LCHAN_SRC_LOG_DST_PHY]
1337 = D40_DREG_PRMO_LCHAN_SRC_LOG_DST_PHY,
1338 [STEDMA40_LCHAN_SRC_LOG_DST_LOG]
1339 = D40_DREG_PRMO_LCHAN_SRC_LOG_DST_LOG,
1340 };
1341
1342 if (chan_is_physical(d40c))
1343 return phy_map[d40c->dma_cfg.mode_opt];
1344 else
1345 return log_map[d40c->dma_cfg.mode_opt];
1346}
1347
1348static void d40_config_write(struct d40_chan *d40c)
1349{
1350 u32 addr_base;
1351 u32 var;
1352
1353 /* Odd addresses are even addresses + 4 */
1354 addr_base = (d40c->phy_chan->num % 2) * 4;
1355 /* Setup channel mode to logical or physical */
1356 var = ((u32)(chan_is_logical(d40c)) + 1) <<
1357 D40_CHAN_POS(d40c->phy_chan->num);
1358 writel(var, d40c->base->virtbase + D40_DREG_PRMSE + addr_base);
1359
1360 /* Setup operational mode option register */
1361 var = d40_get_prmo(d40c) << D40_CHAN_POS(d40c->phy_chan->num);
1362
1363 writel(var, d40c->base->virtbase + D40_DREG_PRMOE + addr_base);
1364
1365 if (chan_is_logical(d40c)) {
1366 int lidx = (d40c->phy_chan->num << D40_SREG_ELEM_LOG_LIDX_POS)
1367 & D40_SREG_ELEM_LOG_LIDX_MASK;
1368 void __iomem *chanbase = chan_base(d40c);
1369
1370 /* Set default config for CFG reg */
1371 writel(d40c->src_def_cfg, chanbase + D40_CHAN_REG_SSCFG);
1372 writel(d40c->dst_def_cfg, chanbase + D40_CHAN_REG_SDCFG);
1373
1374 /* Set LIDX for lcla */
1375 writel(lidx, chanbase + D40_CHAN_REG_SSELT);
1376 writel(lidx, chanbase + D40_CHAN_REG_SDELT);
1377
1378 /* Clear LNK which will be used by d40_chan_has_events() */
1379 writel(0, chanbase + D40_CHAN_REG_SSLNK);
1380 writel(0, chanbase + D40_CHAN_REG_SDLNK);
1381 }
1382}
1383
1384static u32 d40_residue(struct d40_chan *d40c)
1385{
1386 u32 num_elt;
1387
1388 if (chan_is_logical(d40c))
1389 num_elt = (readl(&d40c->lcpa->lcsp2) & D40_MEM_LCSP2_ECNT_MASK)
1390 >> D40_MEM_LCSP2_ECNT_POS;
1391 else {
1392 u32 val = readl(chan_base(d40c) + D40_CHAN_REG_SDELT);
1393 num_elt = (val & D40_SREG_ELEM_PHY_ECNT_MASK)
1394 >> D40_SREG_ELEM_PHY_ECNT_POS;
1395 }
1396
1397 return num_elt * d40c->dma_cfg.dst_info.data_width;
1398}
1399
1400static bool d40_tx_is_linked(struct d40_chan *d40c)
1401{
1402 bool is_link;
1403
1404 if (chan_is_logical(d40c))
1405 is_link = readl(&d40c->lcpa->lcsp3) & D40_MEM_LCSP3_DLOS_MASK;
1406 else
1407 is_link = readl(chan_base(d40c) + D40_CHAN_REG_SDLNK)
1408 & D40_SREG_LNK_PHYS_LNK_MASK;
1409
1410 return is_link;
1411}
1412
1413static int d40_pause(struct dma_chan *chan)
1414{
1415 struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
1416 int res = 0;
1417 unsigned long flags;
1418
1419 if (d40c->phy_chan == NULL) {
1420 chan_err(d40c, "Channel is not allocated!\n");
1421 return -EINVAL;
1422 }
1423
1424 if (!d40c->busy)
1425 return 0;
1426
1427 spin_lock_irqsave(&d40c->lock, flags);
1428 pm_runtime_get_sync(d40c->base->dev);
1429
1430 res = d40_channel_execute_command(d40c, D40_DMA_SUSPEND_REQ);
1431
1432 pm_runtime_mark_last_busy(d40c->base->dev);
1433 pm_runtime_put_autosuspend(d40c->base->dev);
1434 spin_unlock_irqrestore(&d40c->lock, flags);
1435 return res;
1436}
1437
1438static int d40_resume(struct dma_chan *chan)
1439{
1440 struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
1441 int res = 0;
1442 unsigned long flags;
1443
1444 if (d40c->phy_chan == NULL) {
1445 chan_err(d40c, "Channel is not allocated!\n");
1446 return -EINVAL;
1447 }
1448
1449 if (!d40c->busy)
1450 return 0;
1451
1452 spin_lock_irqsave(&d40c->lock, flags);
1453 pm_runtime_get_sync(d40c->base->dev);
1454
1455 /* If bytes left to transfer or linked tx resume job */
1456 if (d40_residue(d40c) || d40_tx_is_linked(d40c))
1457 res = d40_channel_execute_command(d40c, D40_DMA_RUN);
1458
1459 pm_runtime_mark_last_busy(d40c->base->dev);
1460 pm_runtime_put_autosuspend(d40c->base->dev);
1461 spin_unlock_irqrestore(&d40c->lock, flags);
1462 return res;
1463}
1464
1465static dma_cookie_t d40_tx_submit(struct dma_async_tx_descriptor *tx)
1466{
1467 struct d40_chan *d40c = container_of(tx->chan,
1468 struct d40_chan,
1469 chan);
1470 struct d40_desc *d40d = container_of(tx, struct d40_desc, txd);
1471 unsigned long flags;
1472 dma_cookie_t cookie;
1473
1474 spin_lock_irqsave(&d40c->lock, flags);
1475 cookie = dma_cookie_assign(tx);
1476 d40_desc_queue(d40c, d40d);
1477 spin_unlock_irqrestore(&d40c->lock, flags);
1478
1479 return cookie;
1480}
1481
1482static int d40_start(struct d40_chan *d40c)
1483{
1484 return d40_channel_execute_command(d40c, D40_DMA_RUN);
1485}
1486
1487static struct d40_desc *d40_queue_start(struct d40_chan *d40c)
1488{
1489 struct d40_desc *d40d;
1490 int err;
1491
1492 /* Start queued jobs, if any */
1493 d40d = d40_first_queued(d40c);
1494
1495 if (d40d != NULL) {
1496 if (!d40c->busy) {
1497 d40c->busy = true;
1498 pm_runtime_get_sync(d40c->base->dev);
1499 }
1500
1501 /* Remove from queue */
1502 d40_desc_remove(d40d);
1503
1504 /* Add to active queue */
1505 d40_desc_submit(d40c, d40d);
1506
1507 /* Initiate DMA job */
1508 d40_desc_load(d40c, d40d);
1509
1510 /* Start dma job */
1511 err = d40_start(d40c);
1512
1513 if (err)
1514 return NULL;
1515 }
1516
1517 return d40d;
1518}
1519
1520/* called from interrupt context */
1521static void dma_tc_handle(struct d40_chan *d40c)
1522{
1523 struct d40_desc *d40d;
1524
1525 /* Get first active entry from list */
1526 d40d = d40_first_active_get(d40c);
1527
1528 if (d40d == NULL)
1529 return;
1530
1531 if (d40d->cyclic) {
1532 /*
1533 * If this was a paritially loaded list, we need to reloaded
1534 * it, and only when the list is completed. We need to check
1535 * for done because the interrupt will hit for every link, and
1536 * not just the last one.
1537 */
1538 if (d40d->lli_current < d40d->lli_len
1539 && !d40_tx_is_linked(d40c)
1540 && !d40_residue(d40c)) {
1541 d40_lcla_free_all(d40c, d40d);
1542 d40_desc_load(d40c, d40d);
1543 (void) d40_start(d40c);
1544
1545 if (d40d->lli_current == d40d->lli_len)
1546 d40d->lli_current = 0;
1547 }
1548 } else {
1549 d40_lcla_free_all(d40c, d40d);
1550
1551 if (d40d->lli_current < d40d->lli_len) {
1552 d40_desc_load(d40c, d40d);
1553 /* Start dma job */
1554 (void) d40_start(d40c);
1555 return;
1556 }
1557
1558 if (d40_queue_start(d40c) == NULL) {
1559 d40c->busy = false;
1560
1561 pm_runtime_mark_last_busy(d40c->base->dev);
1562 pm_runtime_put_autosuspend(d40c->base->dev);
1563 }
1564
1565 d40_desc_remove(d40d);
1566 d40_desc_done(d40c, d40d);
1567 }
1568
1569 d40c->pending_tx++;
1570 tasklet_schedule(&d40c->tasklet);
1571
1572}
1573
1574static void dma_tasklet(struct tasklet_struct *t)
1575{
1576 struct d40_chan *d40c = from_tasklet(d40c, t, tasklet);
1577 struct d40_desc *d40d;
1578 unsigned long flags;
1579 bool callback_active;
1580 struct dmaengine_desc_callback cb;
1581
1582 spin_lock_irqsave(&d40c->lock, flags);
1583
1584 /* Get first entry from the done list */
1585 d40d = d40_first_done(d40c);
1586 if (d40d == NULL) {
1587 /* Check if we have reached here for cyclic job */
1588 d40d = d40_first_active_get(d40c);
1589 if (d40d == NULL || !d40d->cyclic)
1590 goto check_pending_tx;
1591 }
1592
1593 if (!d40d->cyclic)
1594 dma_cookie_complete(&d40d->txd);
1595
1596 /*
1597 * If terminating a channel pending_tx is set to zero.
1598 * This prevents any finished active jobs to return to the client.
1599 */
1600 if (d40c->pending_tx == 0) {
1601 spin_unlock_irqrestore(&d40c->lock, flags);
1602 return;
1603 }
1604
1605 /* Callback to client */
1606 callback_active = !!(d40d->txd.flags & DMA_PREP_INTERRUPT);
1607 dmaengine_desc_get_callback(&d40d->txd, &cb);
1608
1609 if (!d40d->cyclic) {
1610 if (async_tx_test_ack(&d40d->txd)) {
1611 d40_desc_remove(d40d);
1612 d40_desc_free(d40c, d40d);
1613 } else if (!d40d->is_in_client_list) {
1614 d40_desc_remove(d40d);
1615 d40_lcla_free_all(d40c, d40d);
1616 list_add_tail(&d40d->node, &d40c->client);
1617 d40d->is_in_client_list = true;
1618 }
1619 }
1620
1621 d40c->pending_tx--;
1622
1623 if (d40c->pending_tx)
1624 tasklet_schedule(&d40c->tasklet);
1625
1626 spin_unlock_irqrestore(&d40c->lock, flags);
1627
1628 if (callback_active)
1629 dmaengine_desc_callback_invoke(&cb, NULL);
1630
1631 return;
1632 check_pending_tx:
1633 /* Rescue manouver if receiving double interrupts */
1634 if (d40c->pending_tx > 0)
1635 d40c->pending_tx--;
1636 spin_unlock_irqrestore(&d40c->lock, flags);
1637}
1638
1639static irqreturn_t d40_handle_interrupt(int irq, void *data)
1640{
1641 int i;
1642 u32 idx;
1643 u32 row;
1644 long chan = -1;
1645 struct d40_chan *d40c;
1646 struct d40_base *base = data;
1647 u32 *regs = base->regs_interrupt;
1648 struct d40_interrupt_lookup *il = base->gen_dmac.il;
1649 u32 il_size = base->gen_dmac.il_size;
1650
1651 spin_lock(&base->interrupt_lock);
1652
1653 /* Read interrupt status of both logical and physical channels */
1654 for (i = 0; i < il_size; i++)
1655 regs[i] = readl(base->virtbase + il[i].src);
1656
1657 for (;;) {
1658
1659 chan = find_next_bit((unsigned long *)regs,
1660 BITS_PER_LONG * il_size, chan + 1);
1661
1662 /* No more set bits found? */
1663 if (chan == BITS_PER_LONG * il_size)
1664 break;
1665
1666 row = chan / BITS_PER_LONG;
1667 idx = chan & (BITS_PER_LONG - 1);
1668
1669 if (il[row].offset == D40_PHY_CHAN)
1670 d40c = base->lookup_phy_chans[idx];
1671 else
1672 d40c = base->lookup_log_chans[il[row].offset + idx];
1673
1674 if (!d40c) {
1675 /*
1676 * No error because this can happen if something else
1677 * in the system is using the channel.
1678 */
1679 continue;
1680 }
1681
1682 /* ACK interrupt */
1683 writel(BIT(idx), base->virtbase + il[row].clr);
1684
1685 spin_lock(&d40c->lock);
1686
1687 if (!il[row].is_error)
1688 dma_tc_handle(d40c);
1689 else
1690 d40_err(base->dev, "IRQ chan: %ld offset %d idx %d\n",
1691 chan, il[row].offset, idx);
1692
1693 spin_unlock(&d40c->lock);
1694 }
1695
1696 spin_unlock(&base->interrupt_lock);
1697
1698 return IRQ_HANDLED;
1699}
1700
1701static int d40_validate_conf(struct d40_chan *d40c,
1702 struct stedma40_chan_cfg *conf)
1703{
1704 int res = 0;
1705 bool is_log = conf->mode == STEDMA40_MODE_LOGICAL;
1706
1707 if (!conf->dir) {
1708 chan_err(d40c, "Invalid direction.\n");
1709 res = -EINVAL;
1710 }
1711
1712 if ((is_log && conf->dev_type > d40c->base->num_log_chans) ||
1713 (!is_log && conf->dev_type > d40c->base->num_phy_chans) ||
1714 (conf->dev_type < 0)) {
1715 chan_err(d40c, "Invalid device type (%d)\n", conf->dev_type);
1716 res = -EINVAL;
1717 }
1718
1719 if (conf->dir == DMA_DEV_TO_DEV) {
1720 /*
1721 * DMAC HW supports it. Will be added to this driver,
1722 * in case any dma client requires it.
1723 */
1724 chan_err(d40c, "periph to periph not supported\n");
1725 res = -EINVAL;
1726 }
1727
1728 if (d40_psize_2_burst_size(is_log, conf->src_info.psize) *
1729 conf->src_info.data_width !=
1730 d40_psize_2_burst_size(is_log, conf->dst_info.psize) *
1731 conf->dst_info.data_width) {
1732 /*
1733 * The DMAC hardware only supports
1734 * src (burst x width) == dst (burst x width)
1735 */
1736
1737 chan_err(d40c, "src (burst x width) != dst (burst x width)\n");
1738 res = -EINVAL;
1739 }
1740
1741 return res;
1742}
1743
1744static bool d40_alloc_mask_set(struct d40_phy_res *phy,
1745 bool is_src, int log_event_line, bool is_log,
1746 bool *first_user)
1747{
1748 unsigned long flags;
1749 spin_lock_irqsave(&phy->lock, flags);
1750
1751 *first_user = ((phy->allocated_src | phy->allocated_dst)
1752 == D40_ALLOC_FREE);
1753
1754 if (!is_log) {
1755 /* Physical interrupts are masked per physical full channel */
1756 if (phy->allocated_src == D40_ALLOC_FREE &&
1757 phy->allocated_dst == D40_ALLOC_FREE) {
1758 phy->allocated_dst = D40_ALLOC_PHY;
1759 phy->allocated_src = D40_ALLOC_PHY;
1760 goto found_unlock;
1761 } else
1762 goto not_found_unlock;
1763 }
1764
1765 /* Logical channel */
1766 if (is_src) {
1767 if (phy->allocated_src == D40_ALLOC_PHY)
1768 goto not_found_unlock;
1769
1770 if (phy->allocated_src == D40_ALLOC_FREE)
1771 phy->allocated_src = D40_ALLOC_LOG_FREE;
1772
1773 if (!(phy->allocated_src & BIT(log_event_line))) {
1774 phy->allocated_src |= BIT(log_event_line);
1775 goto found_unlock;
1776 } else
1777 goto not_found_unlock;
1778 } else {
1779 if (phy->allocated_dst == D40_ALLOC_PHY)
1780 goto not_found_unlock;
1781
1782 if (phy->allocated_dst == D40_ALLOC_FREE)
1783 phy->allocated_dst = D40_ALLOC_LOG_FREE;
1784
1785 if (!(phy->allocated_dst & BIT(log_event_line))) {
1786 phy->allocated_dst |= BIT(log_event_line);
1787 goto found_unlock;
1788 }
1789 }
1790 not_found_unlock:
1791 spin_unlock_irqrestore(&phy->lock, flags);
1792 return false;
1793 found_unlock:
1794 spin_unlock_irqrestore(&phy->lock, flags);
1795 return true;
1796}
1797
1798static bool d40_alloc_mask_free(struct d40_phy_res *phy, bool is_src,
1799 int log_event_line)
1800{
1801 unsigned long flags;
1802 bool is_free = false;
1803
1804 spin_lock_irqsave(&phy->lock, flags);
1805 if (!log_event_line) {
1806 phy->allocated_dst = D40_ALLOC_FREE;
1807 phy->allocated_src = D40_ALLOC_FREE;
1808 is_free = true;
1809 goto unlock;
1810 }
1811
1812 /* Logical channel */
1813 if (is_src) {
1814 phy->allocated_src &= ~BIT(log_event_line);
1815 if (phy->allocated_src == D40_ALLOC_LOG_FREE)
1816 phy->allocated_src = D40_ALLOC_FREE;
1817 } else {
1818 phy->allocated_dst &= ~BIT(log_event_line);
1819 if (phy->allocated_dst == D40_ALLOC_LOG_FREE)
1820 phy->allocated_dst = D40_ALLOC_FREE;
1821 }
1822
1823 is_free = ((phy->allocated_src | phy->allocated_dst) ==
1824 D40_ALLOC_FREE);
1825 unlock:
1826 spin_unlock_irqrestore(&phy->lock, flags);
1827
1828 return is_free;
1829}
1830
1831static int d40_allocate_channel(struct d40_chan *d40c, bool *first_phy_user)
1832{
1833 int dev_type = d40c->dma_cfg.dev_type;
1834 int event_group;
1835 int event_line;
1836 struct d40_phy_res *phys;
1837 int i;
1838 int j;
1839 int log_num;
1840 int num_phy_chans;
1841 bool is_src;
1842 bool is_log = d40c->dma_cfg.mode == STEDMA40_MODE_LOGICAL;
1843
1844 phys = d40c->base->phy_res;
1845 num_phy_chans = d40c->base->num_phy_chans;
1846
1847 if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM) {
1848 log_num = 2 * dev_type;
1849 is_src = true;
1850 } else if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV ||
1851 d40c->dma_cfg.dir == DMA_MEM_TO_MEM) {
1852 /* dst event lines are used for logical memcpy */
1853 log_num = 2 * dev_type + 1;
1854 is_src = false;
1855 } else
1856 return -EINVAL;
1857
1858 event_group = D40_TYPE_TO_GROUP(dev_type);
1859 event_line = D40_TYPE_TO_EVENT(dev_type);
1860
1861 if (!is_log) {
1862 if (d40c->dma_cfg.dir == DMA_MEM_TO_MEM) {
1863 /* Find physical half channel */
1864 if (d40c->dma_cfg.use_fixed_channel) {
1865 i = d40c->dma_cfg.phy_channel;
1866 if (d40_alloc_mask_set(&phys[i], is_src,
1867 0, is_log,
1868 first_phy_user))
1869 goto found_phy;
1870 } else {
1871 for (i = 0; i < num_phy_chans; i++) {
1872 if (d40_alloc_mask_set(&phys[i], is_src,
1873 0, is_log,
1874 first_phy_user))
1875 goto found_phy;
1876 }
1877 }
1878 } else
1879 for (j = 0; j < d40c->base->num_phy_chans; j += 8) {
1880 int phy_num = j + event_group * 2;
1881 for (i = phy_num; i < phy_num + 2; i++) {
1882 if (d40_alloc_mask_set(&phys[i],
1883 is_src,
1884 0,
1885 is_log,
1886 first_phy_user))
1887 goto found_phy;
1888 }
1889 }
1890 return -EINVAL;
1891found_phy:
1892 d40c->phy_chan = &phys[i];
1893 d40c->log_num = D40_PHY_CHAN;
1894 goto out;
1895 }
1896 if (dev_type == -1)
1897 return -EINVAL;
1898
1899 /* Find logical channel */
1900 for (j = 0; j < d40c->base->num_phy_chans; j += 8) {
1901 int phy_num = j + event_group * 2;
1902
1903 if (d40c->dma_cfg.use_fixed_channel) {
1904 i = d40c->dma_cfg.phy_channel;
1905
1906 if ((i != phy_num) && (i != phy_num + 1)) {
1907 dev_err(chan2dev(d40c),
1908 "invalid fixed phy channel %d\n", i);
1909 return -EINVAL;
1910 }
1911
1912 if (d40_alloc_mask_set(&phys[i], is_src, event_line,
1913 is_log, first_phy_user))
1914 goto found_log;
1915
1916 dev_err(chan2dev(d40c),
1917 "could not allocate fixed phy channel %d\n", i);
1918 return -EINVAL;
1919 }
1920
1921 /*
1922 * Spread logical channels across all available physical rather
1923 * than pack every logical channel at the first available phy
1924 * channels.
1925 */
1926 if (is_src) {
1927 for (i = phy_num; i < phy_num + 2; i++) {
1928 if (d40_alloc_mask_set(&phys[i], is_src,
1929 event_line, is_log,
1930 first_phy_user))
1931 goto found_log;
1932 }
1933 } else {
1934 for (i = phy_num + 1; i >= phy_num; i--) {
1935 if (d40_alloc_mask_set(&phys[i], is_src,
1936 event_line, is_log,
1937 first_phy_user))
1938 goto found_log;
1939 }
1940 }
1941 }
1942 return -EINVAL;
1943
1944found_log:
1945 d40c->phy_chan = &phys[i];
1946 d40c->log_num = log_num;
1947out:
1948
1949 if (is_log)
1950 d40c->base->lookup_log_chans[d40c->log_num] = d40c;
1951 else
1952 d40c->base->lookup_phy_chans[d40c->phy_chan->num] = d40c;
1953
1954 return 0;
1955
1956}
1957
1958static int d40_config_memcpy(struct d40_chan *d40c)
1959{
1960 dma_cap_mask_t cap = d40c->chan.device->cap_mask;
1961
1962 if (dma_has_cap(DMA_MEMCPY, cap) && !dma_has_cap(DMA_SLAVE, cap)) {
1963 d40c->dma_cfg = dma40_memcpy_conf_log;
1964 d40c->dma_cfg.dev_type = dma40_memcpy_channels[d40c->chan.chan_id];
1965
1966 d40_log_cfg(&d40c->dma_cfg,
1967 &d40c->log_def.lcsp1, &d40c->log_def.lcsp3);
1968
1969 } else if (dma_has_cap(DMA_MEMCPY, cap) &&
1970 dma_has_cap(DMA_SLAVE, cap)) {
1971 d40c->dma_cfg = dma40_memcpy_conf_phy;
1972
1973 /* Generate interrrupt at end of transfer or relink. */
1974 d40c->dst_def_cfg |= BIT(D40_SREG_CFG_TIM_POS);
1975
1976 /* Generate interrupt on error. */
1977 d40c->src_def_cfg |= BIT(D40_SREG_CFG_EIM_POS);
1978 d40c->dst_def_cfg |= BIT(D40_SREG_CFG_EIM_POS);
1979
1980 } else {
1981 chan_err(d40c, "No memcpy\n");
1982 return -EINVAL;
1983 }
1984
1985 return 0;
1986}
1987
1988static int d40_free_dma(struct d40_chan *d40c)
1989{
1990
1991 int res = 0;
1992 u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dev_type);
1993 struct d40_phy_res *phy = d40c->phy_chan;
1994 bool is_src;
1995
1996 /* Terminate all queued and active transfers */
1997 d40_term_all(d40c);
1998
1999 if (phy == NULL) {
2000 chan_err(d40c, "phy == null\n");
2001 return -EINVAL;
2002 }
2003
2004 if (phy->allocated_src == D40_ALLOC_FREE &&
2005 phy->allocated_dst == D40_ALLOC_FREE) {
2006 chan_err(d40c, "channel already free\n");
2007 return -EINVAL;
2008 }
2009
2010 if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV ||
2011 d40c->dma_cfg.dir == DMA_MEM_TO_MEM)
2012 is_src = false;
2013 else if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM)
2014 is_src = true;
2015 else {
2016 chan_err(d40c, "Unknown direction\n");
2017 return -EINVAL;
2018 }
2019
2020 pm_runtime_get_sync(d40c->base->dev);
2021 res = d40_channel_execute_command(d40c, D40_DMA_STOP);
2022 if (res) {
2023 chan_err(d40c, "stop failed\n");
2024 goto mark_last_busy;
2025 }
2026
2027 d40_alloc_mask_free(phy, is_src, chan_is_logical(d40c) ? event : 0);
2028
2029 if (chan_is_logical(d40c))
2030 d40c->base->lookup_log_chans[d40c->log_num] = NULL;
2031 else
2032 d40c->base->lookup_phy_chans[phy->num] = NULL;
2033
2034 if (d40c->busy) {
2035 pm_runtime_mark_last_busy(d40c->base->dev);
2036 pm_runtime_put_autosuspend(d40c->base->dev);
2037 }
2038
2039 d40c->busy = false;
2040 d40c->phy_chan = NULL;
2041 d40c->configured = false;
2042 mark_last_busy:
2043 pm_runtime_mark_last_busy(d40c->base->dev);
2044 pm_runtime_put_autosuspend(d40c->base->dev);
2045 return res;
2046}
2047
2048static bool d40_is_paused(struct d40_chan *d40c)
2049{
2050 void __iomem *chanbase = chan_base(d40c);
2051 bool is_paused = false;
2052 unsigned long flags;
2053 void __iomem *active_reg;
2054 u32 status;
2055 u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dev_type);
2056
2057 spin_lock_irqsave(&d40c->lock, flags);
2058
2059 if (chan_is_physical(d40c)) {
2060 if (d40c->phy_chan->num % 2 == 0)
2061 active_reg = d40c->base->virtbase + D40_DREG_ACTIVE;
2062 else
2063 active_reg = d40c->base->virtbase + D40_DREG_ACTIVO;
2064
2065 status = (readl(active_reg) &
2066 D40_CHAN_POS_MASK(d40c->phy_chan->num)) >>
2067 D40_CHAN_POS(d40c->phy_chan->num);
2068 if (status == D40_DMA_SUSPENDED || status == D40_DMA_STOP)
2069 is_paused = true;
2070 goto unlock;
2071 }
2072
2073 if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV ||
2074 d40c->dma_cfg.dir == DMA_MEM_TO_MEM) {
2075 status = readl(chanbase + D40_CHAN_REG_SDLNK);
2076 } else if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM) {
2077 status = readl(chanbase + D40_CHAN_REG_SSLNK);
2078 } else {
2079 chan_err(d40c, "Unknown direction\n");
2080 goto unlock;
2081 }
2082
2083 status = (status & D40_EVENTLINE_MASK(event)) >>
2084 D40_EVENTLINE_POS(event);
2085
2086 if (status != D40_DMA_RUN)
2087 is_paused = true;
2088 unlock:
2089 spin_unlock_irqrestore(&d40c->lock, flags);
2090 return is_paused;
2091
2092}
2093
2094static u32 stedma40_residue(struct dma_chan *chan)
2095{
2096 struct d40_chan *d40c =
2097 container_of(chan, struct d40_chan, chan);
2098 u32 bytes_left;
2099 unsigned long flags;
2100
2101 spin_lock_irqsave(&d40c->lock, flags);
2102 bytes_left = d40_residue(d40c);
2103 spin_unlock_irqrestore(&d40c->lock, flags);
2104
2105 return bytes_left;
2106}
2107
2108static int
2109d40_prep_sg_log(struct d40_chan *chan, struct d40_desc *desc,
2110 struct scatterlist *sg_src, struct scatterlist *sg_dst,
2111 unsigned int sg_len, dma_addr_t src_dev_addr,
2112 dma_addr_t dst_dev_addr)
2113{
2114 struct stedma40_chan_cfg *cfg = &chan->dma_cfg;
2115 struct stedma40_half_channel_info *src_info = &cfg->src_info;
2116 struct stedma40_half_channel_info *dst_info = &cfg->dst_info;
2117 int ret;
2118
2119 ret = d40_log_sg_to_lli(sg_src, sg_len,
2120 src_dev_addr,
2121 desc->lli_log.src,
2122 chan->log_def.lcsp1,
2123 src_info->data_width,
2124 dst_info->data_width);
2125
2126 ret = d40_log_sg_to_lli(sg_dst, sg_len,
2127 dst_dev_addr,
2128 desc->lli_log.dst,
2129 chan->log_def.lcsp3,
2130 dst_info->data_width,
2131 src_info->data_width);
2132
2133 return ret < 0 ? ret : 0;
2134}
2135
2136static int
2137d40_prep_sg_phy(struct d40_chan *chan, struct d40_desc *desc,
2138 struct scatterlist *sg_src, struct scatterlist *sg_dst,
2139 unsigned int sg_len, dma_addr_t src_dev_addr,
2140 dma_addr_t dst_dev_addr)
2141{
2142 struct stedma40_chan_cfg *cfg = &chan->dma_cfg;
2143 struct stedma40_half_channel_info *src_info = &cfg->src_info;
2144 struct stedma40_half_channel_info *dst_info = &cfg->dst_info;
2145 unsigned long flags = 0;
2146 int ret;
2147
2148 if (desc->cyclic)
2149 flags |= LLI_CYCLIC | LLI_TERM_INT;
2150
2151 ret = d40_phy_sg_to_lli(sg_src, sg_len, src_dev_addr,
2152 desc->lli_phy.src,
2153 virt_to_phys(desc->lli_phy.src),
2154 chan->src_def_cfg,
2155 src_info, dst_info, flags);
2156
2157 ret = d40_phy_sg_to_lli(sg_dst, sg_len, dst_dev_addr,
2158 desc->lli_phy.dst,
2159 virt_to_phys(desc->lli_phy.dst),
2160 chan->dst_def_cfg,
2161 dst_info, src_info, flags);
2162
2163 dma_sync_single_for_device(chan->base->dev, desc->lli_pool.dma_addr,
2164 desc->lli_pool.size, DMA_TO_DEVICE);
2165
2166 return ret < 0 ? ret : 0;
2167}
2168
2169static struct d40_desc *
2170d40_prep_desc(struct d40_chan *chan, struct scatterlist *sg,
2171 unsigned int sg_len, unsigned long dma_flags)
2172{
2173 struct stedma40_chan_cfg *cfg;
2174 struct d40_desc *desc;
2175 int ret;
2176
2177 desc = d40_desc_get(chan);
2178 if (!desc)
2179 return NULL;
2180
2181 cfg = &chan->dma_cfg;
2182 desc->lli_len = d40_sg_2_dmalen(sg, sg_len, cfg->src_info.data_width,
2183 cfg->dst_info.data_width);
2184 if (desc->lli_len < 0) {
2185 chan_err(chan, "Unaligned size\n");
2186 goto free_desc;
2187 }
2188
2189 ret = d40_pool_lli_alloc(chan, desc, desc->lli_len);
2190 if (ret < 0) {
2191 chan_err(chan, "Could not allocate lli\n");
2192 goto free_desc;
2193 }
2194
2195 desc->lli_current = 0;
2196 desc->txd.flags = dma_flags;
2197 desc->txd.tx_submit = d40_tx_submit;
2198
2199 dma_async_tx_descriptor_init(&desc->txd, &chan->chan);
2200
2201 return desc;
2202 free_desc:
2203 d40_desc_free(chan, desc);
2204 return NULL;
2205}
2206
2207static struct dma_async_tx_descriptor *
2208d40_prep_sg(struct dma_chan *dchan, struct scatterlist *sg_src,
2209 struct scatterlist *sg_dst, unsigned int sg_len,
2210 enum dma_transfer_direction direction, unsigned long dma_flags)
2211{
2212 struct d40_chan *chan = container_of(dchan, struct d40_chan, chan);
2213 dma_addr_t src_dev_addr;
2214 dma_addr_t dst_dev_addr;
2215 struct d40_desc *desc;
2216 unsigned long flags;
2217 int ret;
2218
2219 if (!chan->phy_chan) {
2220 chan_err(chan, "Cannot prepare unallocated channel\n");
2221 return NULL;
2222 }
2223
2224 d40_set_runtime_config_write(dchan, &chan->slave_config, direction);
2225
2226 spin_lock_irqsave(&chan->lock, flags);
2227
2228 desc = d40_prep_desc(chan, sg_src, sg_len, dma_flags);
2229 if (desc == NULL)
2230 goto unlock;
2231
2232 if (sg_next(&sg_src[sg_len - 1]) == sg_src)
2233 desc->cyclic = true;
2234
2235 src_dev_addr = 0;
2236 dst_dev_addr = 0;
2237 if (direction == DMA_DEV_TO_MEM)
2238 src_dev_addr = chan->runtime_addr;
2239 else if (direction == DMA_MEM_TO_DEV)
2240 dst_dev_addr = chan->runtime_addr;
2241
2242 if (chan_is_logical(chan))
2243 ret = d40_prep_sg_log(chan, desc, sg_src, sg_dst,
2244 sg_len, src_dev_addr, dst_dev_addr);
2245 else
2246 ret = d40_prep_sg_phy(chan, desc, sg_src, sg_dst,
2247 sg_len, src_dev_addr, dst_dev_addr);
2248
2249 if (ret) {
2250 chan_err(chan, "Failed to prepare %s sg job: %d\n",
2251 chan_is_logical(chan) ? "log" : "phy", ret);
2252 goto free_desc;
2253 }
2254
2255 /*
2256 * add descriptor to the prepare queue in order to be able
2257 * to free them later in terminate_all
2258 */
2259 list_add_tail(&desc->node, &chan->prepare_queue);
2260
2261 spin_unlock_irqrestore(&chan->lock, flags);
2262
2263 return &desc->txd;
2264 free_desc:
2265 d40_desc_free(chan, desc);
2266 unlock:
2267 spin_unlock_irqrestore(&chan->lock, flags);
2268 return NULL;
2269}
2270
2271bool stedma40_filter(struct dma_chan *chan, void *data)
2272{
2273 struct stedma40_chan_cfg *info = data;
2274 struct d40_chan *d40c =
2275 container_of(chan, struct d40_chan, chan);
2276 int err;
2277
2278 if (data) {
2279 err = d40_validate_conf(d40c, info);
2280 if (!err)
2281 d40c->dma_cfg = *info;
2282 } else
2283 err = d40_config_memcpy(d40c);
2284
2285 if (!err)
2286 d40c->configured = true;
2287
2288 return err == 0;
2289}
2290EXPORT_SYMBOL(stedma40_filter);
2291
2292static void __d40_set_prio_rt(struct d40_chan *d40c, int dev_type, bool src)
2293{
2294 bool realtime = d40c->dma_cfg.realtime;
2295 bool highprio = d40c->dma_cfg.high_priority;
2296 u32 rtreg;
2297 u32 event = D40_TYPE_TO_EVENT(dev_type);
2298 u32 group = D40_TYPE_TO_GROUP(dev_type);
2299 u32 bit = BIT(event);
2300 u32 prioreg;
2301 struct d40_gen_dmac *dmac = &d40c->base->gen_dmac;
2302
2303 rtreg = realtime ? dmac->realtime_en : dmac->realtime_clear;
2304 /*
2305 * Due to a hardware bug, in some cases a logical channel triggered by
2306 * a high priority destination event line can generate extra packet
2307 * transactions.
2308 *
2309 * The workaround is to not set the high priority level for the
2310 * destination event lines that trigger logical channels.
2311 */
2312 if (!src && chan_is_logical(d40c))
2313 highprio = false;
2314
2315 prioreg = highprio ? dmac->high_prio_en : dmac->high_prio_clear;
2316
2317 /* Destination event lines are stored in the upper halfword */
2318 if (!src)
2319 bit <<= 16;
2320
2321 writel(bit, d40c->base->virtbase + prioreg + group * 4);
2322 writel(bit, d40c->base->virtbase + rtreg + group * 4);
2323}
2324
2325static void d40_set_prio_realtime(struct d40_chan *d40c)
2326{
2327 if (d40c->base->rev < 3)
2328 return;
2329
2330 if ((d40c->dma_cfg.dir == DMA_DEV_TO_MEM) ||
2331 (d40c->dma_cfg.dir == DMA_DEV_TO_DEV))
2332 __d40_set_prio_rt(d40c, d40c->dma_cfg.dev_type, true);
2333
2334 if ((d40c->dma_cfg.dir == DMA_MEM_TO_DEV) ||
2335 (d40c->dma_cfg.dir == DMA_DEV_TO_DEV))
2336 __d40_set_prio_rt(d40c, d40c->dma_cfg.dev_type, false);
2337}
2338
2339#define D40_DT_FLAGS_MODE(flags) ((flags >> 0) & 0x1)
2340#define D40_DT_FLAGS_DIR(flags) ((flags >> 1) & 0x1)
2341#define D40_DT_FLAGS_BIG_ENDIAN(flags) ((flags >> 2) & 0x1)
2342#define D40_DT_FLAGS_FIXED_CHAN(flags) ((flags >> 3) & 0x1)
2343#define D40_DT_FLAGS_HIGH_PRIO(flags) ((flags >> 4) & 0x1)
2344
2345static struct dma_chan *d40_xlate(struct of_phandle_args *dma_spec,
2346 struct of_dma *ofdma)
2347{
2348 struct stedma40_chan_cfg cfg;
2349 dma_cap_mask_t cap;
2350 u32 flags;
2351
2352 memset(&cfg, 0, sizeof(struct stedma40_chan_cfg));
2353
2354 dma_cap_zero(cap);
2355 dma_cap_set(DMA_SLAVE, cap);
2356
2357 cfg.dev_type = dma_spec->args[0];
2358 flags = dma_spec->args[2];
2359
2360 switch (D40_DT_FLAGS_MODE(flags)) {
2361 case 0: cfg.mode = STEDMA40_MODE_LOGICAL; break;
2362 case 1: cfg.mode = STEDMA40_MODE_PHYSICAL; break;
2363 }
2364
2365 switch (D40_DT_FLAGS_DIR(flags)) {
2366 case 0:
2367 cfg.dir = DMA_MEM_TO_DEV;
2368 cfg.dst_info.big_endian = D40_DT_FLAGS_BIG_ENDIAN(flags);
2369 break;
2370 case 1:
2371 cfg.dir = DMA_DEV_TO_MEM;
2372 cfg.src_info.big_endian = D40_DT_FLAGS_BIG_ENDIAN(flags);
2373 break;
2374 }
2375
2376 if (D40_DT_FLAGS_FIXED_CHAN(flags)) {
2377 cfg.phy_channel = dma_spec->args[1];
2378 cfg.use_fixed_channel = true;
2379 }
2380
2381 if (D40_DT_FLAGS_HIGH_PRIO(flags))
2382 cfg.high_priority = true;
2383
2384 return dma_request_channel(cap, stedma40_filter, &cfg);
2385}
2386
2387/* DMA ENGINE functions */
2388static int d40_alloc_chan_resources(struct dma_chan *chan)
2389{
2390 int err;
2391 unsigned long flags;
2392 struct d40_chan *d40c =
2393 container_of(chan, struct d40_chan, chan);
2394 bool is_free_phy;
2395 spin_lock_irqsave(&d40c->lock, flags);
2396
2397 dma_cookie_init(chan);
2398
2399 /* If no dma configuration is set use default configuration (memcpy) */
2400 if (!d40c->configured) {
2401 err = d40_config_memcpy(d40c);
2402 if (err) {
2403 chan_err(d40c, "Failed to configure memcpy channel\n");
2404 goto mark_last_busy;
2405 }
2406 }
2407
2408 err = d40_allocate_channel(d40c, &is_free_phy);
2409 if (err) {
2410 chan_err(d40c, "Failed to allocate channel\n");
2411 d40c->configured = false;
2412 goto mark_last_busy;
2413 }
2414
2415 pm_runtime_get_sync(d40c->base->dev);
2416
2417 d40_set_prio_realtime(d40c);
2418
2419 if (chan_is_logical(d40c)) {
2420 if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM)
2421 d40c->lcpa = d40c->base->lcpa_base +
2422 d40c->dma_cfg.dev_type * D40_LCPA_CHAN_SIZE;
2423 else
2424 d40c->lcpa = d40c->base->lcpa_base +
2425 d40c->dma_cfg.dev_type *
2426 D40_LCPA_CHAN_SIZE + D40_LCPA_CHAN_DST_DELTA;
2427
2428 /* Unmask the Global Interrupt Mask. */
2429 d40c->src_def_cfg |= BIT(D40_SREG_CFG_LOG_GIM_POS);
2430 d40c->dst_def_cfg |= BIT(D40_SREG_CFG_LOG_GIM_POS);
2431 }
2432
2433 dev_dbg(chan2dev(d40c), "allocated %s channel (phy %d%s)\n",
2434 chan_is_logical(d40c) ? "logical" : "physical",
2435 d40c->phy_chan->num,
2436 d40c->dma_cfg.use_fixed_channel ? ", fixed" : "");
2437
2438
2439 /*
2440 * Only write channel configuration to the DMA if the physical
2441 * resource is free. In case of multiple logical channels
2442 * on the same physical resource, only the first write is necessary.
2443 */
2444 if (is_free_phy)
2445 d40_config_write(d40c);
2446 mark_last_busy:
2447 pm_runtime_mark_last_busy(d40c->base->dev);
2448 pm_runtime_put_autosuspend(d40c->base->dev);
2449 spin_unlock_irqrestore(&d40c->lock, flags);
2450 return err;
2451}
2452
2453static void d40_free_chan_resources(struct dma_chan *chan)
2454{
2455 struct d40_chan *d40c =
2456 container_of(chan, struct d40_chan, chan);
2457 int err;
2458 unsigned long flags;
2459
2460 if (d40c->phy_chan == NULL) {
2461 chan_err(d40c, "Cannot free unallocated channel\n");
2462 return;
2463 }
2464
2465 spin_lock_irqsave(&d40c->lock, flags);
2466
2467 err = d40_free_dma(d40c);
2468
2469 if (err)
2470 chan_err(d40c, "Failed to free channel\n");
2471 spin_unlock_irqrestore(&d40c->lock, flags);
2472}
2473
2474static struct dma_async_tx_descriptor *d40_prep_memcpy(struct dma_chan *chan,
2475 dma_addr_t dst,
2476 dma_addr_t src,
2477 size_t size,
2478 unsigned long dma_flags)
2479{
2480 struct scatterlist dst_sg;
2481 struct scatterlist src_sg;
2482
2483 sg_init_table(&dst_sg, 1);
2484 sg_init_table(&src_sg, 1);
2485
2486 sg_dma_address(&dst_sg) = dst;
2487 sg_dma_address(&src_sg) = src;
2488
2489 sg_dma_len(&dst_sg) = size;
2490 sg_dma_len(&src_sg) = size;
2491
2492 return d40_prep_sg(chan, &src_sg, &dst_sg, 1,
2493 DMA_MEM_TO_MEM, dma_flags);
2494}
2495
2496static struct dma_async_tx_descriptor *
2497d40_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
2498 unsigned int sg_len, enum dma_transfer_direction direction,
2499 unsigned long dma_flags, void *context)
2500{
2501 if (!is_slave_direction(direction))
2502 return NULL;
2503
2504 return d40_prep_sg(chan, sgl, sgl, sg_len, direction, dma_flags);
2505}
2506
2507static struct dma_async_tx_descriptor *
2508dma40_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t dma_addr,
2509 size_t buf_len, size_t period_len,
2510 enum dma_transfer_direction direction, unsigned long flags)
2511{
2512 unsigned int periods = buf_len / period_len;
2513 struct dma_async_tx_descriptor *txd;
2514 struct scatterlist *sg;
2515 int i;
2516
2517 sg = kcalloc(periods + 1, sizeof(struct scatterlist), GFP_NOWAIT);
2518 if (!sg)
2519 return NULL;
2520
2521 for (i = 0; i < periods; i++) {
2522 sg_dma_address(&sg[i]) = dma_addr;
2523 sg_dma_len(&sg[i]) = period_len;
2524 dma_addr += period_len;
2525 }
2526
2527 sg_chain(sg, periods + 1, sg);
2528
2529 txd = d40_prep_sg(chan, sg, sg, periods, direction,
2530 DMA_PREP_INTERRUPT);
2531
2532 kfree(sg);
2533
2534 return txd;
2535}
2536
2537static enum dma_status d40_tx_status(struct dma_chan *chan,
2538 dma_cookie_t cookie,
2539 struct dma_tx_state *txstate)
2540{
2541 struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
2542 enum dma_status ret;
2543
2544 if (d40c->phy_chan == NULL) {
2545 chan_err(d40c, "Cannot read status of unallocated channel\n");
2546 return -EINVAL;
2547 }
2548
2549 ret = dma_cookie_status(chan, cookie, txstate);
2550 if (ret != DMA_COMPLETE && txstate)
2551 dma_set_residue(txstate, stedma40_residue(chan));
2552
2553 if (d40_is_paused(d40c))
2554 ret = DMA_PAUSED;
2555
2556 return ret;
2557}
2558
2559static void d40_issue_pending(struct dma_chan *chan)
2560{
2561 struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
2562 unsigned long flags;
2563
2564 if (d40c->phy_chan == NULL) {
2565 chan_err(d40c, "Channel is not allocated!\n");
2566 return;
2567 }
2568
2569 spin_lock_irqsave(&d40c->lock, flags);
2570
2571 list_splice_tail_init(&d40c->pending_queue, &d40c->queue);
2572
2573 /* Busy means that queued jobs are already being processed */
2574 if (!d40c->busy)
2575 (void) d40_queue_start(d40c);
2576
2577 spin_unlock_irqrestore(&d40c->lock, flags);
2578}
2579
2580static int d40_terminate_all(struct dma_chan *chan)
2581{
2582 unsigned long flags;
2583 struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
2584 int ret;
2585
2586 if (d40c->phy_chan == NULL) {
2587 chan_err(d40c, "Channel is not allocated!\n");
2588 return -EINVAL;
2589 }
2590
2591 spin_lock_irqsave(&d40c->lock, flags);
2592
2593 pm_runtime_get_sync(d40c->base->dev);
2594 ret = d40_channel_execute_command(d40c, D40_DMA_STOP);
2595 if (ret)
2596 chan_err(d40c, "Failed to stop channel\n");
2597
2598 d40_term_all(d40c);
2599 pm_runtime_mark_last_busy(d40c->base->dev);
2600 pm_runtime_put_autosuspend(d40c->base->dev);
2601 if (d40c->busy) {
2602 pm_runtime_mark_last_busy(d40c->base->dev);
2603 pm_runtime_put_autosuspend(d40c->base->dev);
2604 }
2605 d40c->busy = false;
2606
2607 spin_unlock_irqrestore(&d40c->lock, flags);
2608 return 0;
2609}
2610
2611static int
2612dma40_config_to_halfchannel(struct d40_chan *d40c,
2613 struct stedma40_half_channel_info *info,
2614 u32 maxburst)
2615{
2616 int psize;
2617
2618 if (chan_is_logical(d40c)) {
2619 if (maxburst >= 16)
2620 psize = STEDMA40_PSIZE_LOG_16;
2621 else if (maxburst >= 8)
2622 psize = STEDMA40_PSIZE_LOG_8;
2623 else if (maxburst >= 4)
2624 psize = STEDMA40_PSIZE_LOG_4;
2625 else
2626 psize = STEDMA40_PSIZE_LOG_1;
2627 } else {
2628 if (maxburst >= 16)
2629 psize = STEDMA40_PSIZE_PHY_16;
2630 else if (maxburst >= 8)
2631 psize = STEDMA40_PSIZE_PHY_8;
2632 else if (maxburst >= 4)
2633 psize = STEDMA40_PSIZE_PHY_4;
2634 else
2635 psize = STEDMA40_PSIZE_PHY_1;
2636 }
2637
2638 info->psize = psize;
2639 info->flow_ctrl = STEDMA40_NO_FLOW_CTRL;
2640
2641 return 0;
2642}
2643
2644static int d40_set_runtime_config(struct dma_chan *chan,
2645 struct dma_slave_config *config)
2646{
2647 struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
2648
2649 memcpy(&d40c->slave_config, config, sizeof(*config));
2650
2651 return 0;
2652}
2653
2654/* Runtime reconfiguration extension */
2655static int d40_set_runtime_config_write(struct dma_chan *chan,
2656 struct dma_slave_config *config,
2657 enum dma_transfer_direction direction)
2658{
2659 struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
2660 struct stedma40_chan_cfg *cfg = &d40c->dma_cfg;
2661 enum dma_slave_buswidth src_addr_width, dst_addr_width;
2662 dma_addr_t config_addr;
2663 u32 src_maxburst, dst_maxburst;
2664 int ret;
2665
2666 if (d40c->phy_chan == NULL) {
2667 chan_err(d40c, "Channel is not allocated!\n");
2668 return -EINVAL;
2669 }
2670
2671 src_addr_width = config->src_addr_width;
2672 src_maxburst = config->src_maxburst;
2673 dst_addr_width = config->dst_addr_width;
2674 dst_maxburst = config->dst_maxburst;
2675
2676 if (direction == DMA_DEV_TO_MEM) {
2677 config_addr = config->src_addr;
2678
2679 if (cfg->dir != DMA_DEV_TO_MEM)
2680 dev_dbg(d40c->base->dev,
2681 "channel was not configured for peripheral "
2682 "to memory transfer (%d) overriding\n",
2683 cfg->dir);
2684 cfg->dir = DMA_DEV_TO_MEM;
2685
2686 /* Configure the memory side */
2687 if (dst_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED)
2688 dst_addr_width = src_addr_width;
2689 if (dst_maxburst == 0)
2690 dst_maxburst = src_maxburst;
2691
2692 } else if (direction == DMA_MEM_TO_DEV) {
2693 config_addr = config->dst_addr;
2694
2695 if (cfg->dir != DMA_MEM_TO_DEV)
2696 dev_dbg(d40c->base->dev,
2697 "channel was not configured for memory "
2698 "to peripheral transfer (%d) overriding\n",
2699 cfg->dir);
2700 cfg->dir = DMA_MEM_TO_DEV;
2701
2702 /* Configure the memory side */
2703 if (src_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED)
2704 src_addr_width = dst_addr_width;
2705 if (src_maxburst == 0)
2706 src_maxburst = dst_maxburst;
2707 } else {
2708 dev_err(d40c->base->dev,
2709 "unrecognized channel direction %d\n",
2710 direction);
2711 return -EINVAL;
2712 }
2713
2714 if (config_addr <= 0) {
2715 dev_err(d40c->base->dev, "no address supplied\n");
2716 return -EINVAL;
2717 }
2718
2719 if (src_maxburst * src_addr_width != dst_maxburst * dst_addr_width) {
2720 dev_err(d40c->base->dev,
2721 "src/dst width/maxburst mismatch: %d*%d != %d*%d\n",
2722 src_maxburst,
2723 src_addr_width,
2724 dst_maxburst,
2725 dst_addr_width);
2726 return -EINVAL;
2727 }
2728
2729 if (src_maxburst > 16) {
2730 src_maxburst = 16;
2731 dst_maxburst = src_maxburst * src_addr_width / dst_addr_width;
2732 } else if (dst_maxburst > 16) {
2733 dst_maxburst = 16;
2734 src_maxburst = dst_maxburst * dst_addr_width / src_addr_width;
2735 }
2736
2737 /* Only valid widths are; 1, 2, 4 and 8. */
2738 if (src_addr_width <= DMA_SLAVE_BUSWIDTH_UNDEFINED ||
2739 src_addr_width > DMA_SLAVE_BUSWIDTH_8_BYTES ||
2740 dst_addr_width <= DMA_SLAVE_BUSWIDTH_UNDEFINED ||
2741 dst_addr_width > DMA_SLAVE_BUSWIDTH_8_BYTES ||
2742 !is_power_of_2(src_addr_width) ||
2743 !is_power_of_2(dst_addr_width))
2744 return -EINVAL;
2745
2746 cfg->src_info.data_width = src_addr_width;
2747 cfg->dst_info.data_width = dst_addr_width;
2748
2749 ret = dma40_config_to_halfchannel(d40c, &cfg->src_info,
2750 src_maxburst);
2751 if (ret)
2752 return ret;
2753
2754 ret = dma40_config_to_halfchannel(d40c, &cfg->dst_info,
2755 dst_maxburst);
2756 if (ret)
2757 return ret;
2758
2759 /* Fill in register values */
2760 if (chan_is_logical(d40c))
2761 d40_log_cfg(cfg, &d40c->log_def.lcsp1, &d40c->log_def.lcsp3);
2762 else
2763 d40_phy_cfg(cfg, &d40c->src_def_cfg, &d40c->dst_def_cfg);
2764
2765 /* These settings will take precedence later */
2766 d40c->runtime_addr = config_addr;
2767 d40c->runtime_direction = direction;
2768 dev_dbg(d40c->base->dev,
2769 "configured channel %s for %s, data width %d/%d, "
2770 "maxburst %d/%d elements, LE, no flow control\n",
2771 dma_chan_name(chan),
2772 (direction == DMA_DEV_TO_MEM) ? "RX" : "TX",
2773 src_addr_width, dst_addr_width,
2774 src_maxburst, dst_maxburst);
2775
2776 return 0;
2777}
2778
2779/* Initialization functions */
2780
2781static void __init d40_chan_init(struct d40_base *base, struct dma_device *dma,
2782 struct d40_chan *chans, int offset,
2783 int num_chans)
2784{
2785 int i = 0;
2786 struct d40_chan *d40c;
2787
2788 INIT_LIST_HEAD(&dma->channels);
2789
2790 for (i = offset; i < offset + num_chans; i++) {
2791 d40c = &chans[i];
2792 d40c->base = base;
2793 d40c->chan.device = dma;
2794
2795 spin_lock_init(&d40c->lock);
2796
2797 d40c->log_num = D40_PHY_CHAN;
2798
2799 INIT_LIST_HEAD(&d40c->done);
2800 INIT_LIST_HEAD(&d40c->active);
2801 INIT_LIST_HEAD(&d40c->queue);
2802 INIT_LIST_HEAD(&d40c->pending_queue);
2803 INIT_LIST_HEAD(&d40c->client);
2804 INIT_LIST_HEAD(&d40c->prepare_queue);
2805
2806 tasklet_setup(&d40c->tasklet, dma_tasklet);
2807
2808 list_add_tail(&d40c->chan.device_node,
2809 &dma->channels);
2810 }
2811}
2812
2813static void d40_ops_init(struct d40_base *base, struct dma_device *dev)
2814{
2815 if (dma_has_cap(DMA_SLAVE, dev->cap_mask)) {
2816 dev->device_prep_slave_sg = d40_prep_slave_sg;
2817 dev->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
2818 }
2819
2820 if (dma_has_cap(DMA_MEMCPY, dev->cap_mask)) {
2821 dev->device_prep_dma_memcpy = d40_prep_memcpy;
2822 dev->directions = BIT(DMA_MEM_TO_MEM);
2823 /*
2824 * This controller can only access address at even
2825 * 32bit boundaries, i.e. 2^2
2826 */
2827 dev->copy_align = DMAENGINE_ALIGN_4_BYTES;
2828 }
2829
2830 if (dma_has_cap(DMA_CYCLIC, dev->cap_mask))
2831 dev->device_prep_dma_cyclic = dma40_prep_dma_cyclic;
2832
2833 dev->device_alloc_chan_resources = d40_alloc_chan_resources;
2834 dev->device_free_chan_resources = d40_free_chan_resources;
2835 dev->device_issue_pending = d40_issue_pending;
2836 dev->device_tx_status = d40_tx_status;
2837 dev->device_config = d40_set_runtime_config;
2838 dev->device_pause = d40_pause;
2839 dev->device_resume = d40_resume;
2840 dev->device_terminate_all = d40_terminate_all;
2841 dev->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
2842 dev->dev = base->dev;
2843}
2844
2845static int __init d40_dmaengine_init(struct d40_base *base,
2846 int num_reserved_chans)
2847{
2848 int err ;
2849
2850 d40_chan_init(base, &base->dma_slave, base->log_chans,
2851 0, base->num_log_chans);
2852
2853 dma_cap_zero(base->dma_slave.cap_mask);
2854 dma_cap_set(DMA_SLAVE, base->dma_slave.cap_mask);
2855 dma_cap_set(DMA_CYCLIC, base->dma_slave.cap_mask);
2856
2857 d40_ops_init(base, &base->dma_slave);
2858
2859 err = dmaenginem_async_device_register(&base->dma_slave);
2860
2861 if (err) {
2862 d40_err(base->dev, "Failed to register slave channels\n");
2863 goto exit;
2864 }
2865
2866 d40_chan_init(base, &base->dma_memcpy, base->log_chans,
2867 base->num_log_chans, base->num_memcpy_chans);
2868
2869 dma_cap_zero(base->dma_memcpy.cap_mask);
2870 dma_cap_set(DMA_MEMCPY, base->dma_memcpy.cap_mask);
2871
2872 d40_ops_init(base, &base->dma_memcpy);
2873
2874 err = dmaenginem_async_device_register(&base->dma_memcpy);
2875
2876 if (err) {
2877 d40_err(base->dev,
2878 "Failed to register memcpy only channels\n");
2879 goto exit;
2880 }
2881
2882 d40_chan_init(base, &base->dma_both, base->phy_chans,
2883 0, num_reserved_chans);
2884
2885 dma_cap_zero(base->dma_both.cap_mask);
2886 dma_cap_set(DMA_SLAVE, base->dma_both.cap_mask);
2887 dma_cap_set(DMA_MEMCPY, base->dma_both.cap_mask);
2888 dma_cap_set(DMA_CYCLIC, base->dma_slave.cap_mask);
2889
2890 d40_ops_init(base, &base->dma_both);
2891 err = dmaenginem_async_device_register(&base->dma_both);
2892
2893 if (err) {
2894 d40_err(base->dev,
2895 "Failed to register logical and physical capable channels\n");
2896 goto exit;
2897 }
2898 return 0;
2899 exit:
2900 return err;
2901}
2902
2903/* Suspend resume functionality */
2904#ifdef CONFIG_PM_SLEEP
2905static int dma40_suspend(struct device *dev)
2906{
2907 struct d40_base *base = dev_get_drvdata(dev);
2908 int ret;
2909
2910 ret = pm_runtime_force_suspend(dev);
2911 if (ret)
2912 return ret;
2913
2914 if (base->lcpa_regulator)
2915 ret = regulator_disable(base->lcpa_regulator);
2916 return ret;
2917}
2918
2919static int dma40_resume(struct device *dev)
2920{
2921 struct d40_base *base = dev_get_drvdata(dev);
2922 int ret = 0;
2923
2924 if (base->lcpa_regulator) {
2925 ret = regulator_enable(base->lcpa_regulator);
2926 if (ret)
2927 return ret;
2928 }
2929
2930 return pm_runtime_force_resume(dev);
2931}
2932#endif
2933
2934#ifdef CONFIG_PM
2935static void dma40_backup(void __iomem *baseaddr, u32 *backup,
2936 u32 *regaddr, int num, bool save)
2937{
2938 int i;
2939
2940 for (i = 0; i < num; i++) {
2941 void __iomem *addr = baseaddr + regaddr[i];
2942
2943 if (save)
2944 backup[i] = readl_relaxed(addr);
2945 else
2946 writel_relaxed(backup[i], addr);
2947 }
2948}
2949
2950static void d40_save_restore_registers(struct d40_base *base, bool save)
2951{
2952 int i;
2953
2954 /* Save/Restore channel specific registers */
2955 for (i = 0; i < base->num_phy_chans; i++) {
2956 void __iomem *addr;
2957 int idx;
2958
2959 if (base->phy_res[i].reserved)
2960 continue;
2961
2962 addr = base->virtbase + D40_DREG_PCBASE + i * D40_DREG_PCDELTA;
2963 idx = i * ARRAY_SIZE(d40_backup_regs_chan);
2964
2965 dma40_backup(addr, &base->reg_val_backup_chan[idx],
2966 d40_backup_regs_chan,
2967 ARRAY_SIZE(d40_backup_regs_chan),
2968 save);
2969 }
2970
2971 /* Save/Restore global registers */
2972 dma40_backup(base->virtbase, base->reg_val_backup,
2973 d40_backup_regs, ARRAY_SIZE(d40_backup_regs),
2974 save);
2975
2976 /* Save/Restore registers only existing on dma40 v3 and later */
2977 if (base->gen_dmac.backup)
2978 dma40_backup(base->virtbase, base->reg_val_backup_v4,
2979 base->gen_dmac.backup,
2980 base->gen_dmac.backup_size,
2981 save);
2982}
2983
2984static int dma40_runtime_suspend(struct device *dev)
2985{
2986 struct d40_base *base = dev_get_drvdata(dev);
2987
2988 d40_save_restore_registers(base, true);
2989
2990 /* Don't disable/enable clocks for v1 due to HW bugs */
2991 if (base->rev != 1)
2992 writel_relaxed(base->gcc_pwr_off_mask,
2993 base->virtbase + D40_DREG_GCC);
2994
2995 return 0;
2996}
2997
2998static int dma40_runtime_resume(struct device *dev)
2999{
3000 struct d40_base *base = dev_get_drvdata(dev);
3001
3002 d40_save_restore_registers(base, false);
3003
3004 writel_relaxed(D40_DREG_GCC_ENABLE_ALL,
3005 base->virtbase + D40_DREG_GCC);
3006 return 0;
3007}
3008#endif
3009
3010static const struct dev_pm_ops dma40_pm_ops = {
3011 SET_LATE_SYSTEM_SLEEP_PM_OPS(dma40_suspend, dma40_resume)
3012 SET_RUNTIME_PM_OPS(dma40_runtime_suspend,
3013 dma40_runtime_resume,
3014 NULL)
3015};
3016
3017/* Initialization functions. */
3018
3019static int __init d40_phy_res_init(struct d40_base *base)
3020{
3021 int i;
3022 int num_phy_chans_avail = 0;
3023 u32 val[2];
3024 int odd_even_bit = -2;
3025 int gcc = D40_DREG_GCC_ENA;
3026
3027 val[0] = readl(base->virtbase + D40_DREG_PRSME);
3028 val[1] = readl(base->virtbase + D40_DREG_PRSMO);
3029
3030 for (i = 0; i < base->num_phy_chans; i++) {
3031 base->phy_res[i].num = i;
3032 odd_even_bit += 2 * ((i % 2) == 0);
3033 if (((val[i % 2] >> odd_even_bit) & 3) == 1) {
3034 /* Mark security only channels as occupied */
3035 base->phy_res[i].allocated_src = D40_ALLOC_PHY;
3036 base->phy_res[i].allocated_dst = D40_ALLOC_PHY;
3037 base->phy_res[i].reserved = true;
3038 gcc |= D40_DREG_GCC_EVTGRP_ENA(D40_PHYS_TO_GROUP(i),
3039 D40_DREG_GCC_SRC);
3040 gcc |= D40_DREG_GCC_EVTGRP_ENA(D40_PHYS_TO_GROUP(i),
3041 D40_DREG_GCC_DST);
3042
3043
3044 } else {
3045 base->phy_res[i].allocated_src = D40_ALLOC_FREE;
3046 base->phy_res[i].allocated_dst = D40_ALLOC_FREE;
3047 base->phy_res[i].reserved = false;
3048 num_phy_chans_avail++;
3049 }
3050 spin_lock_init(&base->phy_res[i].lock);
3051 }
3052
3053 /* Mark disabled channels as occupied */
3054 for (i = 0; base->plat_data->disabled_channels[i] != -1; i++) {
3055 int chan = base->plat_data->disabled_channels[i];
3056
3057 base->phy_res[chan].allocated_src = D40_ALLOC_PHY;
3058 base->phy_res[chan].allocated_dst = D40_ALLOC_PHY;
3059 base->phy_res[chan].reserved = true;
3060 gcc |= D40_DREG_GCC_EVTGRP_ENA(D40_PHYS_TO_GROUP(chan),
3061 D40_DREG_GCC_SRC);
3062 gcc |= D40_DREG_GCC_EVTGRP_ENA(D40_PHYS_TO_GROUP(chan),
3063 D40_DREG_GCC_DST);
3064 num_phy_chans_avail--;
3065 }
3066
3067 /* Mark soft_lli channels */
3068 for (i = 0; i < base->plat_data->num_of_soft_lli_chans; i++) {
3069 int chan = base->plat_data->soft_lli_chans[i];
3070
3071 base->phy_res[chan].use_soft_lli = true;
3072 }
3073
3074 dev_info(base->dev, "%d of %d physical DMA channels available\n",
3075 num_phy_chans_avail, base->num_phy_chans);
3076
3077 /* Verify settings extended vs standard */
3078 val[0] = readl(base->virtbase + D40_DREG_PRTYP);
3079
3080 for (i = 0; i < base->num_phy_chans; i++) {
3081
3082 if (base->phy_res[i].allocated_src == D40_ALLOC_FREE &&
3083 (val[0] & 0x3) != 1)
3084 dev_info(base->dev,
3085 "[%s] INFO: channel %d is misconfigured (%d)\n",
3086 __func__, i, val[0] & 0x3);
3087
3088 val[0] = val[0] >> 2;
3089 }
3090
3091 /*
3092 * To keep things simple, Enable all clocks initially.
3093 * The clocks will get managed later post channel allocation.
3094 * The clocks for the event lines on which reserved channels exists
3095 * are not managed here.
3096 */
3097 writel(D40_DREG_GCC_ENABLE_ALL, base->virtbase + D40_DREG_GCC);
3098 base->gcc_pwr_off_mask = gcc;
3099
3100 return num_phy_chans_avail;
3101}
3102
3103static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev)
3104{
3105 struct stedma40_platform_data *plat_data = dev_get_platdata(&pdev->dev);
3106 struct clk *clk;
3107 void __iomem *virtbase;
3108 struct resource *res;
3109 struct d40_base *base;
3110 int num_log_chans;
3111 int num_phy_chans;
3112 int num_memcpy_chans;
3113 int clk_ret = -EINVAL;
3114 int i;
3115 u32 pid;
3116 u32 cid;
3117 u8 rev;
3118
3119 clk = clk_get(&pdev->dev, NULL);
3120 if (IS_ERR(clk)) {
3121 d40_err(&pdev->dev, "No matching clock found\n");
3122 goto check_prepare_enabled;
3123 }
3124
3125 clk_ret = clk_prepare_enable(clk);
3126 if (clk_ret) {
3127 d40_err(&pdev->dev, "Failed to prepare/enable clock\n");
3128 goto disable_unprepare;
3129 }
3130
3131 /* Get IO for DMAC base address */
3132 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "base");
3133 if (!res)
3134 goto disable_unprepare;
3135
3136 if (request_mem_region(res->start, resource_size(res),
3137 D40_NAME " I/O base") == NULL)
3138 goto release_region;
3139
3140 virtbase = ioremap(res->start, resource_size(res));
3141 if (!virtbase)
3142 goto release_region;
3143
3144 /* This is just a regular AMBA PrimeCell ID actually */
3145 for (pid = 0, i = 0; i < 4; i++)
3146 pid |= (readl(virtbase + resource_size(res) - 0x20 + 4 * i)
3147 & 255) << (i * 8);
3148 for (cid = 0, i = 0; i < 4; i++)
3149 cid |= (readl(virtbase + resource_size(res) - 0x10 + 4 * i)
3150 & 255) << (i * 8);
3151
3152 if (cid != AMBA_CID) {
3153 d40_err(&pdev->dev, "Unknown hardware! No PrimeCell ID\n");
3154 goto unmap_io;
3155 }
3156 if (AMBA_MANF_BITS(pid) != AMBA_VENDOR_ST) {
3157 d40_err(&pdev->dev, "Unknown designer! Got %x wanted %x\n",
3158 AMBA_MANF_BITS(pid),
3159 AMBA_VENDOR_ST);
3160 goto unmap_io;
3161 }
3162 /*
3163 * HW revision:
3164 * DB8500ed has revision 0
3165 * ? has revision 1
3166 * DB8500v1 has revision 2
3167 * DB8500v2 has revision 3
3168 * AP9540v1 has revision 4
3169 * DB8540v1 has revision 4
3170 */
3171 rev = AMBA_REV_BITS(pid);
3172 if (rev < 2) {
3173 d40_err(&pdev->dev, "hardware revision: %d is not supported", rev);
3174 goto unmap_io;
3175 }
3176
3177 /* The number of physical channels on this HW */
3178 if (plat_data->num_of_phy_chans)
3179 num_phy_chans = plat_data->num_of_phy_chans;
3180 else
3181 num_phy_chans = 4 * (readl(virtbase + D40_DREG_ICFG) & 0x7) + 4;
3182
3183 /* The number of channels used for memcpy */
3184 if (plat_data->num_of_memcpy_chans)
3185 num_memcpy_chans = plat_data->num_of_memcpy_chans;
3186 else
3187 num_memcpy_chans = ARRAY_SIZE(dma40_memcpy_channels);
3188
3189 num_log_chans = num_phy_chans * D40_MAX_LOG_CHAN_PER_PHY;
3190
3191 dev_info(&pdev->dev,
3192 "hardware rev: %d @ %pa with %d physical and %d logical channels\n",
3193 rev, &res->start, num_phy_chans, num_log_chans);
3194
3195 base = kzalloc(ALIGN(sizeof(struct d40_base), 4) +
3196 (num_phy_chans + num_log_chans + num_memcpy_chans) *
3197 sizeof(struct d40_chan), GFP_KERNEL);
3198
3199 if (base == NULL)
3200 goto unmap_io;
3201
3202 base->rev = rev;
3203 base->clk = clk;
3204 base->num_memcpy_chans = num_memcpy_chans;
3205 base->num_phy_chans = num_phy_chans;
3206 base->num_log_chans = num_log_chans;
3207 base->phy_start = res->start;
3208 base->phy_size = resource_size(res);
3209 base->virtbase = virtbase;
3210 base->plat_data = plat_data;
3211 base->dev = &pdev->dev;
3212 base->phy_chans = ((void *)base) + ALIGN(sizeof(struct d40_base), 4);
3213 base->log_chans = &base->phy_chans[num_phy_chans];
3214
3215 if (base->plat_data->num_of_phy_chans == 14) {
3216 base->gen_dmac.backup = d40_backup_regs_v4b;
3217 base->gen_dmac.backup_size = BACKUP_REGS_SZ_V4B;
3218 base->gen_dmac.interrupt_en = D40_DREG_CPCMIS;
3219 base->gen_dmac.interrupt_clear = D40_DREG_CPCICR;
3220 base->gen_dmac.realtime_en = D40_DREG_CRSEG1;
3221 base->gen_dmac.realtime_clear = D40_DREG_CRCEG1;
3222 base->gen_dmac.high_prio_en = D40_DREG_CPSEG1;
3223 base->gen_dmac.high_prio_clear = D40_DREG_CPCEG1;
3224 base->gen_dmac.il = il_v4b;
3225 base->gen_dmac.il_size = ARRAY_SIZE(il_v4b);
3226 base->gen_dmac.init_reg = dma_init_reg_v4b;
3227 base->gen_dmac.init_reg_size = ARRAY_SIZE(dma_init_reg_v4b);
3228 } else {
3229 if (base->rev >= 3) {
3230 base->gen_dmac.backup = d40_backup_regs_v4a;
3231 base->gen_dmac.backup_size = BACKUP_REGS_SZ_V4A;
3232 }
3233 base->gen_dmac.interrupt_en = D40_DREG_PCMIS;
3234 base->gen_dmac.interrupt_clear = D40_DREG_PCICR;
3235 base->gen_dmac.realtime_en = D40_DREG_RSEG1;
3236 base->gen_dmac.realtime_clear = D40_DREG_RCEG1;
3237 base->gen_dmac.high_prio_en = D40_DREG_PSEG1;
3238 base->gen_dmac.high_prio_clear = D40_DREG_PCEG1;
3239 base->gen_dmac.il = il_v4a;
3240 base->gen_dmac.il_size = ARRAY_SIZE(il_v4a);
3241 base->gen_dmac.init_reg = dma_init_reg_v4a;
3242 base->gen_dmac.init_reg_size = ARRAY_SIZE(dma_init_reg_v4a);
3243 }
3244
3245 base->phy_res = kcalloc(num_phy_chans,
3246 sizeof(*base->phy_res),
3247 GFP_KERNEL);
3248 if (!base->phy_res)
3249 goto free_base;
3250
3251 base->lookup_phy_chans = kcalloc(num_phy_chans,
3252 sizeof(*base->lookup_phy_chans),
3253 GFP_KERNEL);
3254 if (!base->lookup_phy_chans)
3255 goto free_phy_res;
3256
3257 base->lookup_log_chans = kcalloc(num_log_chans,
3258 sizeof(*base->lookup_log_chans),
3259 GFP_KERNEL);
3260 if (!base->lookup_log_chans)
3261 goto free_phy_chans;
3262
3263 base->reg_val_backup_chan = kmalloc_array(base->num_phy_chans,
3264 sizeof(d40_backup_regs_chan),
3265 GFP_KERNEL);
3266 if (!base->reg_val_backup_chan)
3267 goto free_log_chans;
3268
3269 base->lcla_pool.alloc_map = kcalloc(num_phy_chans
3270 * D40_LCLA_LINK_PER_EVENT_GRP,
3271 sizeof(*base->lcla_pool.alloc_map),
3272 GFP_KERNEL);
3273 if (!base->lcla_pool.alloc_map)
3274 goto free_backup_chan;
3275
3276 base->regs_interrupt = kmalloc_array(base->gen_dmac.il_size,
3277 sizeof(*base->regs_interrupt),
3278 GFP_KERNEL);
3279 if (!base->regs_interrupt)
3280 goto free_map;
3281
3282 base->desc_slab = kmem_cache_create(D40_NAME, sizeof(struct d40_desc),
3283 0, SLAB_HWCACHE_ALIGN,
3284 NULL);
3285 if (base->desc_slab == NULL)
3286 goto free_regs;
3287
3288
3289 return base;
3290 free_regs:
3291 kfree(base->regs_interrupt);
3292 free_map:
3293 kfree(base->lcla_pool.alloc_map);
3294 free_backup_chan:
3295 kfree(base->reg_val_backup_chan);
3296 free_log_chans:
3297 kfree(base->lookup_log_chans);
3298 free_phy_chans:
3299 kfree(base->lookup_phy_chans);
3300 free_phy_res:
3301 kfree(base->phy_res);
3302 free_base:
3303 kfree(base);
3304 unmap_io:
3305 iounmap(virtbase);
3306 release_region:
3307 release_mem_region(res->start, resource_size(res));
3308 check_prepare_enabled:
3309 if (!clk_ret)
3310 disable_unprepare:
3311 clk_disable_unprepare(clk);
3312 if (!IS_ERR(clk))
3313 clk_put(clk);
3314 return NULL;
3315}
3316
3317static void __init d40_hw_init(struct d40_base *base)
3318{
3319
3320 int i;
3321 u32 prmseo[2] = {0, 0};
3322 u32 activeo[2] = {0xFFFFFFFF, 0xFFFFFFFF};
3323 u32 pcmis = 0;
3324 u32 pcicr = 0;
3325 struct d40_reg_val *dma_init_reg = base->gen_dmac.init_reg;
3326 u32 reg_size = base->gen_dmac.init_reg_size;
3327
3328 for (i = 0; i < reg_size; i++)
3329 writel(dma_init_reg[i].val,
3330 base->virtbase + dma_init_reg[i].reg);
3331
3332 /* Configure all our dma channels to default settings */
3333 for (i = 0; i < base->num_phy_chans; i++) {
3334
3335 activeo[i % 2] = activeo[i % 2] << 2;
3336
3337 if (base->phy_res[base->num_phy_chans - i - 1].allocated_src
3338 == D40_ALLOC_PHY) {
3339 activeo[i % 2] |= 3;
3340 continue;
3341 }
3342
3343 /* Enable interrupt # */
3344 pcmis = (pcmis << 1) | 1;
3345
3346 /* Clear interrupt # */
3347 pcicr = (pcicr << 1) | 1;
3348
3349 /* Set channel to physical mode */
3350 prmseo[i % 2] = prmseo[i % 2] << 2;
3351 prmseo[i % 2] |= 1;
3352
3353 }
3354
3355 writel(prmseo[1], base->virtbase + D40_DREG_PRMSE);
3356 writel(prmseo[0], base->virtbase + D40_DREG_PRMSO);
3357 writel(activeo[1], base->virtbase + D40_DREG_ACTIVE);
3358 writel(activeo[0], base->virtbase + D40_DREG_ACTIVO);
3359
3360 /* Write which interrupt to enable */
3361 writel(pcmis, base->virtbase + base->gen_dmac.interrupt_en);
3362
3363 /* Write which interrupt to clear */
3364 writel(pcicr, base->virtbase + base->gen_dmac.interrupt_clear);
3365
3366 /* These are __initdata and cannot be accessed after init */
3367 base->gen_dmac.init_reg = NULL;
3368 base->gen_dmac.init_reg_size = 0;
3369}
3370
3371static int __init d40_lcla_allocate(struct d40_base *base)
3372{
3373 struct d40_lcla_pool *pool = &base->lcla_pool;
3374 unsigned long *page_list;
3375 int i, j;
3376 int ret;
3377
3378 /*
3379 * This is somewhat ugly. We need 8192 bytes that are 18 bit aligned,
3380 * To full fill this hardware requirement without wasting 256 kb
3381 * we allocate pages until we get an aligned one.
3382 */
3383 page_list = kmalloc_array(MAX_LCLA_ALLOC_ATTEMPTS,
3384 sizeof(*page_list),
3385 GFP_KERNEL);
3386 if (!page_list)
3387 return -ENOMEM;
3388
3389 /* Calculating how many pages that are required */
3390 base->lcla_pool.pages = SZ_1K * base->num_phy_chans / PAGE_SIZE;
3391
3392 for (i = 0; i < MAX_LCLA_ALLOC_ATTEMPTS; i++) {
3393 page_list[i] = __get_free_pages(GFP_KERNEL,
3394 base->lcla_pool.pages);
3395 if (!page_list[i]) {
3396
3397 d40_err(base->dev, "Failed to allocate %d pages.\n",
3398 base->lcla_pool.pages);
3399 ret = -ENOMEM;
3400
3401 for (j = 0; j < i; j++)
3402 free_pages(page_list[j], base->lcla_pool.pages);
3403 goto free_page_list;
3404 }
3405
3406 if ((virt_to_phys((void *)page_list[i]) &
3407 (LCLA_ALIGNMENT - 1)) == 0)
3408 break;
3409 }
3410
3411 for (j = 0; j < i; j++)
3412 free_pages(page_list[j], base->lcla_pool.pages);
3413
3414 if (i < MAX_LCLA_ALLOC_ATTEMPTS) {
3415 base->lcla_pool.base = (void *)page_list[i];
3416 } else {
3417 /*
3418 * After many attempts and no succees with finding the correct
3419 * alignment, try with allocating a big buffer.
3420 */
3421 dev_warn(base->dev,
3422 "[%s] Failed to get %d pages @ 18 bit align.\n",
3423 __func__, base->lcla_pool.pages);
3424 base->lcla_pool.base_unaligned = kmalloc(SZ_1K *
3425 base->num_phy_chans +
3426 LCLA_ALIGNMENT,
3427 GFP_KERNEL);
3428 if (!base->lcla_pool.base_unaligned) {
3429 ret = -ENOMEM;
3430 goto free_page_list;
3431 }
3432
3433 base->lcla_pool.base = PTR_ALIGN(base->lcla_pool.base_unaligned,
3434 LCLA_ALIGNMENT);
3435 }
3436
3437 pool->dma_addr = dma_map_single(base->dev, pool->base,
3438 SZ_1K * base->num_phy_chans,
3439 DMA_TO_DEVICE);
3440 if (dma_mapping_error(base->dev, pool->dma_addr)) {
3441 pool->dma_addr = 0;
3442 ret = -ENOMEM;
3443 goto free_page_list;
3444 }
3445
3446 writel(virt_to_phys(base->lcla_pool.base),
3447 base->virtbase + D40_DREG_LCLA);
3448 ret = 0;
3449 free_page_list:
3450 kfree(page_list);
3451 return ret;
3452}
3453
3454static int __init d40_of_probe(struct platform_device *pdev,
3455 struct device_node *np)
3456{
3457 struct stedma40_platform_data *pdata;
3458 int num_phy = 0, num_memcpy = 0, num_disabled = 0;
3459 const __be32 *list;
3460
3461 pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
3462 if (!pdata)
3463 return -ENOMEM;
3464
3465 /* If absent this value will be obtained from h/w. */
3466 of_property_read_u32(np, "dma-channels", &num_phy);
3467 if (num_phy > 0)
3468 pdata->num_of_phy_chans = num_phy;
3469
3470 list = of_get_property(np, "memcpy-channels", &num_memcpy);
3471 num_memcpy /= sizeof(*list);
3472
3473 if (num_memcpy > D40_MEMCPY_MAX_CHANS || num_memcpy <= 0) {
3474 d40_err(&pdev->dev,
3475 "Invalid number of memcpy channels specified (%d)\n",
3476 num_memcpy);
3477 return -EINVAL;
3478 }
3479 pdata->num_of_memcpy_chans = num_memcpy;
3480
3481 of_property_read_u32_array(np, "memcpy-channels",
3482 dma40_memcpy_channels,
3483 num_memcpy);
3484
3485 list = of_get_property(np, "disabled-channels", &num_disabled);
3486 num_disabled /= sizeof(*list);
3487
3488 if (num_disabled >= STEDMA40_MAX_PHYS || num_disabled < 0) {
3489 d40_err(&pdev->dev,
3490 "Invalid number of disabled channels specified (%d)\n",
3491 num_disabled);
3492 return -EINVAL;
3493 }
3494
3495 of_property_read_u32_array(np, "disabled-channels",
3496 pdata->disabled_channels,
3497 num_disabled);
3498 pdata->disabled_channels[num_disabled] = -1;
3499
3500 pdev->dev.platform_data = pdata;
3501
3502 return 0;
3503}
3504
3505static int __init d40_probe(struct platform_device *pdev)
3506{
3507 struct stedma40_platform_data *plat_data = dev_get_platdata(&pdev->dev);
3508 struct device_node *np = pdev->dev.of_node;
3509 int ret = -ENOENT;
3510 struct d40_base *base;
3511 struct resource *res;
3512 int num_reserved_chans;
3513 u32 val;
3514
3515 if (!plat_data) {
3516 if (np) {
3517 if (d40_of_probe(pdev, np)) {
3518 ret = -ENOMEM;
3519 goto report_failure;
3520 }
3521 } else {
3522 d40_err(&pdev->dev, "No pdata or Device Tree provided\n");
3523 goto report_failure;
3524 }
3525 }
3526
3527 base = d40_hw_detect_init(pdev);
3528 if (!base)
3529 goto report_failure;
3530
3531 num_reserved_chans = d40_phy_res_init(base);
3532
3533 platform_set_drvdata(pdev, base);
3534
3535 spin_lock_init(&base->interrupt_lock);
3536 spin_lock_init(&base->execmd_lock);
3537
3538 /* Get IO for logical channel parameter address */
3539 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "lcpa");
3540 if (!res) {
3541 ret = -ENOENT;
3542 d40_err(&pdev->dev, "No \"lcpa\" memory resource\n");
3543 goto destroy_cache;
3544 }
3545 base->lcpa_size = resource_size(res);
3546 base->phy_lcpa = res->start;
3547
3548 if (request_mem_region(res->start, resource_size(res),
3549 D40_NAME " I/O lcpa") == NULL) {
3550 ret = -EBUSY;
3551 d40_err(&pdev->dev, "Failed to request LCPA region %pR\n", res);
3552 goto destroy_cache;
3553 }
3554
3555 /* We make use of ESRAM memory for this. */
3556 val = readl(base->virtbase + D40_DREG_LCPA);
3557 if (res->start != val && val != 0) {
3558 dev_warn(&pdev->dev,
3559 "[%s] Mismatch LCPA dma 0x%x, def %pa\n",
3560 __func__, val, &res->start);
3561 } else
3562 writel(res->start, base->virtbase + D40_DREG_LCPA);
3563
3564 base->lcpa_base = ioremap(res->start, resource_size(res));
3565 if (!base->lcpa_base) {
3566 ret = -ENOMEM;
3567 d40_err(&pdev->dev, "Failed to ioremap LCPA region\n");
3568 goto destroy_cache;
3569 }
3570 /* If lcla has to be located in ESRAM we don't need to allocate */
3571 if (base->plat_data->use_esram_lcla) {
3572 res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
3573 "lcla_esram");
3574 if (!res) {
3575 ret = -ENOENT;
3576 d40_err(&pdev->dev,
3577 "No \"lcla_esram\" memory resource\n");
3578 goto destroy_cache;
3579 }
3580 base->lcla_pool.base = ioremap(res->start,
3581 resource_size(res));
3582 if (!base->lcla_pool.base) {
3583 ret = -ENOMEM;
3584 d40_err(&pdev->dev, "Failed to ioremap LCLA region\n");
3585 goto destroy_cache;
3586 }
3587 writel(res->start, base->virtbase + D40_DREG_LCLA);
3588
3589 } else {
3590 ret = d40_lcla_allocate(base);
3591 if (ret) {
3592 d40_err(&pdev->dev, "Failed to allocate LCLA area\n");
3593 goto destroy_cache;
3594 }
3595 }
3596
3597 spin_lock_init(&base->lcla_pool.lock);
3598
3599 base->irq = platform_get_irq(pdev, 0);
3600
3601 ret = request_irq(base->irq, d40_handle_interrupt, 0, D40_NAME, base);
3602 if (ret) {
3603 d40_err(&pdev->dev, "No IRQ defined\n");
3604 goto destroy_cache;
3605 }
3606
3607 if (base->plat_data->use_esram_lcla) {
3608
3609 base->lcpa_regulator = regulator_get(base->dev, "lcla_esram");
3610 if (IS_ERR(base->lcpa_regulator)) {
3611 d40_err(&pdev->dev, "Failed to get lcpa_regulator\n");
3612 ret = PTR_ERR(base->lcpa_regulator);
3613 base->lcpa_regulator = NULL;
3614 goto destroy_cache;
3615 }
3616
3617 ret = regulator_enable(base->lcpa_regulator);
3618 if (ret) {
3619 d40_err(&pdev->dev,
3620 "Failed to enable lcpa_regulator\n");
3621 regulator_put(base->lcpa_regulator);
3622 base->lcpa_regulator = NULL;
3623 goto destroy_cache;
3624 }
3625 }
3626
3627 writel_relaxed(D40_DREG_GCC_ENABLE_ALL, base->virtbase + D40_DREG_GCC);
3628
3629 pm_runtime_irq_safe(base->dev);
3630 pm_runtime_set_autosuspend_delay(base->dev, DMA40_AUTOSUSPEND_DELAY);
3631 pm_runtime_use_autosuspend(base->dev);
3632 pm_runtime_mark_last_busy(base->dev);
3633 pm_runtime_set_active(base->dev);
3634 pm_runtime_enable(base->dev);
3635
3636 ret = d40_dmaengine_init(base, num_reserved_chans);
3637 if (ret)
3638 goto destroy_cache;
3639
3640 ret = dma_set_max_seg_size(base->dev, STEDMA40_MAX_SEG_SIZE);
3641 if (ret) {
3642 d40_err(&pdev->dev, "Failed to set dma max seg size\n");
3643 goto destroy_cache;
3644 }
3645
3646 d40_hw_init(base);
3647
3648 if (np) {
3649 ret = of_dma_controller_register(np, d40_xlate, NULL);
3650 if (ret)
3651 dev_err(&pdev->dev,
3652 "could not register of_dma_controller\n");
3653 }
3654
3655 dev_info(base->dev, "initialized\n");
3656 return 0;
3657 destroy_cache:
3658 kmem_cache_destroy(base->desc_slab);
3659 if (base->virtbase)
3660 iounmap(base->virtbase);
3661
3662 if (base->lcla_pool.base && base->plat_data->use_esram_lcla) {
3663 iounmap(base->lcla_pool.base);
3664 base->lcla_pool.base = NULL;
3665 }
3666
3667 if (base->lcla_pool.dma_addr)
3668 dma_unmap_single(base->dev, base->lcla_pool.dma_addr,
3669 SZ_1K * base->num_phy_chans,
3670 DMA_TO_DEVICE);
3671
3672 if (!base->lcla_pool.base_unaligned && base->lcla_pool.base)
3673 free_pages((unsigned long)base->lcla_pool.base,
3674 base->lcla_pool.pages);
3675
3676 kfree(base->lcla_pool.base_unaligned);
3677
3678 if (base->lcpa_base)
3679 iounmap(base->lcpa_base);
3680
3681 if (base->phy_lcpa)
3682 release_mem_region(base->phy_lcpa,
3683 base->lcpa_size);
3684 if (base->phy_start)
3685 release_mem_region(base->phy_start,
3686 base->phy_size);
3687 if (base->clk) {
3688 clk_disable_unprepare(base->clk);
3689 clk_put(base->clk);
3690 }
3691
3692 if (base->lcpa_regulator) {
3693 regulator_disable(base->lcpa_regulator);
3694 regulator_put(base->lcpa_regulator);
3695 }
3696
3697 kfree(base->lcla_pool.alloc_map);
3698 kfree(base->lookup_log_chans);
3699 kfree(base->lookup_phy_chans);
3700 kfree(base->phy_res);
3701 kfree(base);
3702 report_failure:
3703 d40_err(&pdev->dev, "probe failed\n");
3704 return ret;
3705}
3706
3707static const struct of_device_id d40_match[] = {
3708 { .compatible = "stericsson,dma40", },
3709 {}
3710};
3711
3712static struct platform_driver d40_driver = {
3713 .driver = {
3714 .name = D40_NAME,
3715 .pm = &dma40_pm_ops,
3716 .of_match_table = d40_match,
3717 },
3718};
3719
3720static int __init stedma40_init(void)
3721{
3722 return platform_driver_probe(&d40_driver, d40_probe);
3723}
3724subsys_initcall(stedma40_init);