Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright (C) 1992, 1998-2006 Linus Torvalds, Ingo Molnar
4 * Copyright (C) 2005-2006 Thomas Gleixner
5 *
6 * This file contains driver APIs to the irq subsystem.
7 */
8
9#define pr_fmt(fmt) "genirq: " fmt
10
11#include <linux/irq.h>
12#include <linux/kthread.h>
13#include <linux/module.h>
14#include <linux/random.h>
15#include <linux/interrupt.h>
16#include <linux/irqdomain.h>
17#include <linux/slab.h>
18#include <linux/sched.h>
19#include <linux/sched/rt.h>
20#include <linux/sched/task.h>
21#include <linux/sched/isolation.h>
22#include <uapi/linux/sched/types.h>
23#include <linux/task_work.h>
24
25#include "internals.h"
26
27#if defined(CONFIG_IRQ_FORCED_THREADING) && !defined(CONFIG_PREEMPT_RT)
28__read_mostly bool force_irqthreads;
29EXPORT_SYMBOL_GPL(force_irqthreads);
30
31static int __init setup_forced_irqthreads(char *arg)
32{
33 force_irqthreads = true;
34 return 0;
35}
36early_param("threadirqs", setup_forced_irqthreads);
37#endif
38
39static void __synchronize_hardirq(struct irq_desc *desc, bool sync_chip)
40{
41 struct irq_data *irqd = irq_desc_get_irq_data(desc);
42 bool inprogress;
43
44 do {
45 unsigned long flags;
46
47 /*
48 * Wait until we're out of the critical section. This might
49 * give the wrong answer due to the lack of memory barriers.
50 */
51 while (irqd_irq_inprogress(&desc->irq_data))
52 cpu_relax();
53
54 /* Ok, that indicated we're done: double-check carefully. */
55 raw_spin_lock_irqsave(&desc->lock, flags);
56 inprogress = irqd_irq_inprogress(&desc->irq_data);
57
58 /*
59 * If requested and supported, check at the chip whether it
60 * is in flight at the hardware level, i.e. already pending
61 * in a CPU and waiting for service and acknowledge.
62 */
63 if (!inprogress && sync_chip) {
64 /*
65 * Ignore the return code. inprogress is only updated
66 * when the chip supports it.
67 */
68 __irq_get_irqchip_state(irqd, IRQCHIP_STATE_ACTIVE,
69 &inprogress);
70 }
71 raw_spin_unlock_irqrestore(&desc->lock, flags);
72
73 /* Oops, that failed? */
74 } while (inprogress);
75}
76
77/**
78 * synchronize_hardirq - wait for pending hard IRQ handlers (on other CPUs)
79 * @irq: interrupt number to wait for
80 *
81 * This function waits for any pending hard IRQ handlers for this
82 * interrupt to complete before returning. If you use this
83 * function while holding a resource the IRQ handler may need you
84 * will deadlock. It does not take associated threaded handlers
85 * into account.
86 *
87 * Do not use this for shutdown scenarios where you must be sure
88 * that all parts (hardirq and threaded handler) have completed.
89 *
90 * Returns: false if a threaded handler is active.
91 *
92 * This function may be called - with care - from IRQ context.
93 *
94 * It does not check whether there is an interrupt in flight at the
95 * hardware level, but not serviced yet, as this might deadlock when
96 * called with interrupts disabled and the target CPU of the interrupt
97 * is the current CPU.
98 */
99bool synchronize_hardirq(unsigned int irq)
100{
101 struct irq_desc *desc = irq_to_desc(irq);
102
103 if (desc) {
104 __synchronize_hardirq(desc, false);
105 return !atomic_read(&desc->threads_active);
106 }
107
108 return true;
109}
110EXPORT_SYMBOL(synchronize_hardirq);
111
112/**
113 * synchronize_irq - wait for pending IRQ handlers (on other CPUs)
114 * @irq: interrupt number to wait for
115 *
116 * This function waits for any pending IRQ handlers for this interrupt
117 * to complete before returning. If you use this function while
118 * holding a resource the IRQ handler may need you will deadlock.
119 *
120 * Can only be called from preemptible code as it might sleep when
121 * an interrupt thread is associated to @irq.
122 *
123 * It optionally makes sure (when the irq chip supports that method)
124 * that the interrupt is not pending in any CPU and waiting for
125 * service.
126 */
127void synchronize_irq(unsigned int irq)
128{
129 struct irq_desc *desc = irq_to_desc(irq);
130
131 if (desc) {
132 __synchronize_hardirq(desc, true);
133 /*
134 * We made sure that no hardirq handler is
135 * running. Now verify that no threaded handlers are
136 * active.
137 */
138 wait_event(desc->wait_for_threads,
139 !atomic_read(&desc->threads_active));
140 }
141}
142EXPORT_SYMBOL(synchronize_irq);
143
144#ifdef CONFIG_SMP
145cpumask_var_t irq_default_affinity;
146
147static bool __irq_can_set_affinity(struct irq_desc *desc)
148{
149 if (!desc || !irqd_can_balance(&desc->irq_data) ||
150 !desc->irq_data.chip || !desc->irq_data.chip->irq_set_affinity)
151 return false;
152 return true;
153}
154
155/**
156 * irq_can_set_affinity - Check if the affinity of a given irq can be set
157 * @irq: Interrupt to check
158 *
159 */
160int irq_can_set_affinity(unsigned int irq)
161{
162 return __irq_can_set_affinity(irq_to_desc(irq));
163}
164
165/**
166 * irq_can_set_affinity_usr - Check if affinity of a irq can be set from user space
167 * @irq: Interrupt to check
168 *
169 * Like irq_can_set_affinity() above, but additionally checks for the
170 * AFFINITY_MANAGED flag.
171 */
172bool irq_can_set_affinity_usr(unsigned int irq)
173{
174 struct irq_desc *desc = irq_to_desc(irq);
175
176 return __irq_can_set_affinity(desc) &&
177 !irqd_affinity_is_managed(&desc->irq_data);
178}
179
180/**
181 * irq_set_thread_affinity - Notify irq threads to adjust affinity
182 * @desc: irq descriptor which has affitnity changed
183 *
184 * We just set IRQTF_AFFINITY and delegate the affinity setting
185 * to the interrupt thread itself. We can not call
186 * set_cpus_allowed_ptr() here as we hold desc->lock and this
187 * code can be called from hard interrupt context.
188 */
189void irq_set_thread_affinity(struct irq_desc *desc)
190{
191 struct irqaction *action;
192
193 for_each_action_of_desc(desc, action)
194 if (action->thread)
195 set_bit(IRQTF_AFFINITY, &action->thread_flags);
196}
197
198#ifdef CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK
199static void irq_validate_effective_affinity(struct irq_data *data)
200{
201 const struct cpumask *m = irq_data_get_effective_affinity_mask(data);
202 struct irq_chip *chip = irq_data_get_irq_chip(data);
203
204 if (!cpumask_empty(m))
205 return;
206 pr_warn_once("irq_chip %s did not update eff. affinity mask of irq %u\n",
207 chip->name, data->irq);
208}
209
210static inline void irq_init_effective_affinity(struct irq_data *data,
211 const struct cpumask *mask)
212{
213 cpumask_copy(irq_data_get_effective_affinity_mask(data), mask);
214}
215#else
216static inline void irq_validate_effective_affinity(struct irq_data *data) { }
217static inline void irq_init_effective_affinity(struct irq_data *data,
218 const struct cpumask *mask) { }
219#endif
220
221int irq_do_set_affinity(struct irq_data *data, const struct cpumask *mask,
222 bool force)
223{
224 struct irq_desc *desc = irq_data_to_desc(data);
225 struct irq_chip *chip = irq_data_get_irq_chip(data);
226 int ret;
227
228 if (!chip || !chip->irq_set_affinity)
229 return -EINVAL;
230
231 /*
232 * If this is a managed interrupt and housekeeping is enabled on
233 * it check whether the requested affinity mask intersects with
234 * a housekeeping CPU. If so, then remove the isolated CPUs from
235 * the mask and just keep the housekeeping CPU(s). This prevents
236 * the affinity setter from routing the interrupt to an isolated
237 * CPU to avoid that I/O submitted from a housekeeping CPU causes
238 * interrupts on an isolated one.
239 *
240 * If the masks do not intersect or include online CPU(s) then
241 * keep the requested mask. The isolated target CPUs are only
242 * receiving interrupts when the I/O operation was submitted
243 * directly from them.
244 *
245 * If all housekeeping CPUs in the affinity mask are offline, the
246 * interrupt will be migrated by the CPU hotplug code once a
247 * housekeeping CPU which belongs to the affinity mask comes
248 * online.
249 */
250 if (irqd_affinity_is_managed(data) &&
251 housekeeping_enabled(HK_FLAG_MANAGED_IRQ)) {
252 const struct cpumask *hk_mask, *prog_mask;
253
254 static DEFINE_RAW_SPINLOCK(tmp_mask_lock);
255 static struct cpumask tmp_mask;
256
257 hk_mask = housekeeping_cpumask(HK_FLAG_MANAGED_IRQ);
258
259 raw_spin_lock(&tmp_mask_lock);
260 cpumask_and(&tmp_mask, mask, hk_mask);
261 if (!cpumask_intersects(&tmp_mask, cpu_online_mask))
262 prog_mask = mask;
263 else
264 prog_mask = &tmp_mask;
265 ret = chip->irq_set_affinity(data, prog_mask, force);
266 raw_spin_unlock(&tmp_mask_lock);
267 } else {
268 ret = chip->irq_set_affinity(data, mask, force);
269 }
270 switch (ret) {
271 case IRQ_SET_MASK_OK:
272 case IRQ_SET_MASK_OK_DONE:
273 cpumask_copy(desc->irq_common_data.affinity, mask);
274 fallthrough;
275 case IRQ_SET_MASK_OK_NOCOPY:
276 irq_validate_effective_affinity(data);
277 irq_set_thread_affinity(desc);
278 ret = 0;
279 }
280
281 return ret;
282}
283
284#ifdef CONFIG_GENERIC_PENDING_IRQ
285static inline int irq_set_affinity_pending(struct irq_data *data,
286 const struct cpumask *dest)
287{
288 struct irq_desc *desc = irq_data_to_desc(data);
289
290 irqd_set_move_pending(data);
291 irq_copy_pending(desc, dest);
292 return 0;
293}
294#else
295static inline int irq_set_affinity_pending(struct irq_data *data,
296 const struct cpumask *dest)
297{
298 return -EBUSY;
299}
300#endif
301
302static int irq_try_set_affinity(struct irq_data *data,
303 const struct cpumask *dest, bool force)
304{
305 int ret = irq_do_set_affinity(data, dest, force);
306
307 /*
308 * In case that the underlying vector management is busy and the
309 * architecture supports the generic pending mechanism then utilize
310 * this to avoid returning an error to user space.
311 */
312 if (ret == -EBUSY && !force)
313 ret = irq_set_affinity_pending(data, dest);
314 return ret;
315}
316
317static bool irq_set_affinity_deactivated(struct irq_data *data,
318 const struct cpumask *mask, bool force)
319{
320 struct irq_desc *desc = irq_data_to_desc(data);
321
322 /*
323 * Handle irq chips which can handle affinity only in activated
324 * state correctly
325 *
326 * If the interrupt is not yet activated, just store the affinity
327 * mask and do not call the chip driver at all. On activation the
328 * driver has to make sure anyway that the interrupt is in a
329 * useable state so startup works.
330 */
331 if (!IS_ENABLED(CONFIG_IRQ_DOMAIN_HIERARCHY) ||
332 irqd_is_activated(data) || !irqd_affinity_on_activate(data))
333 return false;
334
335 cpumask_copy(desc->irq_common_data.affinity, mask);
336 irq_init_effective_affinity(data, mask);
337 irqd_set(data, IRQD_AFFINITY_SET);
338 return true;
339}
340
341int irq_set_affinity_locked(struct irq_data *data, const struct cpumask *mask,
342 bool force)
343{
344 struct irq_chip *chip = irq_data_get_irq_chip(data);
345 struct irq_desc *desc = irq_data_to_desc(data);
346 int ret = 0;
347
348 if (!chip || !chip->irq_set_affinity)
349 return -EINVAL;
350
351 if (irq_set_affinity_deactivated(data, mask, force))
352 return 0;
353
354 if (irq_can_move_pcntxt(data) && !irqd_is_setaffinity_pending(data)) {
355 ret = irq_try_set_affinity(data, mask, force);
356 } else {
357 irqd_set_move_pending(data);
358 irq_copy_pending(desc, mask);
359 }
360
361 if (desc->affinity_notify) {
362 kref_get(&desc->affinity_notify->kref);
363 if (!schedule_work(&desc->affinity_notify->work)) {
364 /* Work was already scheduled, drop our extra ref */
365 kref_put(&desc->affinity_notify->kref,
366 desc->affinity_notify->release);
367 }
368 }
369 irqd_set(data, IRQD_AFFINITY_SET);
370
371 return ret;
372}
373
374int __irq_set_affinity(unsigned int irq, const struct cpumask *mask, bool force)
375{
376 struct irq_desc *desc = irq_to_desc(irq);
377 unsigned long flags;
378 int ret;
379
380 if (!desc)
381 return -EINVAL;
382
383 raw_spin_lock_irqsave(&desc->lock, flags);
384 ret = irq_set_affinity_locked(irq_desc_get_irq_data(desc), mask, force);
385 raw_spin_unlock_irqrestore(&desc->lock, flags);
386 return ret;
387}
388
389int irq_set_affinity_hint(unsigned int irq, const struct cpumask *m)
390{
391 unsigned long flags;
392 struct irq_desc *desc = irq_get_desc_lock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
393
394 if (!desc)
395 return -EINVAL;
396 desc->affinity_hint = m;
397 irq_put_desc_unlock(desc, flags);
398 /* set the initial affinity to prevent every interrupt being on CPU0 */
399 if (m)
400 __irq_set_affinity(irq, m, false);
401 return 0;
402}
403EXPORT_SYMBOL_GPL(irq_set_affinity_hint);
404
405static void irq_affinity_notify(struct work_struct *work)
406{
407 struct irq_affinity_notify *notify =
408 container_of(work, struct irq_affinity_notify, work);
409 struct irq_desc *desc = irq_to_desc(notify->irq);
410 cpumask_var_t cpumask;
411 unsigned long flags;
412
413 if (!desc || !alloc_cpumask_var(&cpumask, GFP_KERNEL))
414 goto out;
415
416 raw_spin_lock_irqsave(&desc->lock, flags);
417 if (irq_move_pending(&desc->irq_data))
418 irq_get_pending(cpumask, desc);
419 else
420 cpumask_copy(cpumask, desc->irq_common_data.affinity);
421 raw_spin_unlock_irqrestore(&desc->lock, flags);
422
423 notify->notify(notify, cpumask);
424
425 free_cpumask_var(cpumask);
426out:
427 kref_put(¬ify->kref, notify->release);
428}
429
430/**
431 * irq_set_affinity_notifier - control notification of IRQ affinity changes
432 * @irq: Interrupt for which to enable/disable notification
433 * @notify: Context for notification, or %NULL to disable
434 * notification. Function pointers must be initialised;
435 * the other fields will be initialised by this function.
436 *
437 * Must be called in process context. Notification may only be enabled
438 * after the IRQ is allocated and must be disabled before the IRQ is
439 * freed using free_irq().
440 */
441int
442irq_set_affinity_notifier(unsigned int irq, struct irq_affinity_notify *notify)
443{
444 struct irq_desc *desc = irq_to_desc(irq);
445 struct irq_affinity_notify *old_notify;
446 unsigned long flags;
447
448 /* The release function is promised process context */
449 might_sleep();
450
451 if (!desc || desc->istate & IRQS_NMI)
452 return -EINVAL;
453
454 /* Complete initialisation of *notify */
455 if (notify) {
456 notify->irq = irq;
457 kref_init(¬ify->kref);
458 INIT_WORK(¬ify->work, irq_affinity_notify);
459 }
460
461 raw_spin_lock_irqsave(&desc->lock, flags);
462 old_notify = desc->affinity_notify;
463 desc->affinity_notify = notify;
464 raw_spin_unlock_irqrestore(&desc->lock, flags);
465
466 if (old_notify) {
467 if (cancel_work_sync(&old_notify->work)) {
468 /* Pending work had a ref, put that one too */
469 kref_put(&old_notify->kref, old_notify->release);
470 }
471 kref_put(&old_notify->kref, old_notify->release);
472 }
473
474 return 0;
475}
476EXPORT_SYMBOL_GPL(irq_set_affinity_notifier);
477
478#ifndef CONFIG_AUTO_IRQ_AFFINITY
479/*
480 * Generic version of the affinity autoselector.
481 */
482int irq_setup_affinity(struct irq_desc *desc)
483{
484 struct cpumask *set = irq_default_affinity;
485 int ret, node = irq_desc_get_node(desc);
486 static DEFINE_RAW_SPINLOCK(mask_lock);
487 static struct cpumask mask;
488
489 /* Excludes PER_CPU and NO_BALANCE interrupts */
490 if (!__irq_can_set_affinity(desc))
491 return 0;
492
493 raw_spin_lock(&mask_lock);
494 /*
495 * Preserve the managed affinity setting and a userspace affinity
496 * setup, but make sure that one of the targets is online.
497 */
498 if (irqd_affinity_is_managed(&desc->irq_data) ||
499 irqd_has_set(&desc->irq_data, IRQD_AFFINITY_SET)) {
500 if (cpumask_intersects(desc->irq_common_data.affinity,
501 cpu_online_mask))
502 set = desc->irq_common_data.affinity;
503 else
504 irqd_clear(&desc->irq_data, IRQD_AFFINITY_SET);
505 }
506
507 cpumask_and(&mask, cpu_online_mask, set);
508 if (cpumask_empty(&mask))
509 cpumask_copy(&mask, cpu_online_mask);
510
511 if (node != NUMA_NO_NODE) {
512 const struct cpumask *nodemask = cpumask_of_node(node);
513
514 /* make sure at least one of the cpus in nodemask is online */
515 if (cpumask_intersects(&mask, nodemask))
516 cpumask_and(&mask, &mask, nodemask);
517 }
518 ret = irq_do_set_affinity(&desc->irq_data, &mask, false);
519 raw_spin_unlock(&mask_lock);
520 return ret;
521}
522#else
523/* Wrapper for ALPHA specific affinity selector magic */
524int irq_setup_affinity(struct irq_desc *desc)
525{
526 return irq_select_affinity(irq_desc_get_irq(desc));
527}
528#endif /* CONFIG_AUTO_IRQ_AFFINITY */
529#endif /* CONFIG_SMP */
530
531
532/**
533 * irq_set_vcpu_affinity - Set vcpu affinity for the interrupt
534 * @irq: interrupt number to set affinity
535 * @vcpu_info: vCPU specific data or pointer to a percpu array of vCPU
536 * specific data for percpu_devid interrupts
537 *
538 * This function uses the vCPU specific data to set the vCPU
539 * affinity for an irq. The vCPU specific data is passed from
540 * outside, such as KVM. One example code path is as below:
541 * KVM -> IOMMU -> irq_set_vcpu_affinity().
542 */
543int irq_set_vcpu_affinity(unsigned int irq, void *vcpu_info)
544{
545 unsigned long flags;
546 struct irq_desc *desc = irq_get_desc_lock(irq, &flags, 0);
547 struct irq_data *data;
548 struct irq_chip *chip;
549 int ret = -ENOSYS;
550
551 if (!desc)
552 return -EINVAL;
553
554 data = irq_desc_get_irq_data(desc);
555 do {
556 chip = irq_data_get_irq_chip(data);
557 if (chip && chip->irq_set_vcpu_affinity)
558 break;
559#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
560 data = data->parent_data;
561#else
562 data = NULL;
563#endif
564 } while (data);
565
566 if (data)
567 ret = chip->irq_set_vcpu_affinity(data, vcpu_info);
568 irq_put_desc_unlock(desc, flags);
569
570 return ret;
571}
572EXPORT_SYMBOL_GPL(irq_set_vcpu_affinity);
573
574void __disable_irq(struct irq_desc *desc)
575{
576 if (!desc->depth++)
577 irq_disable(desc);
578}
579
580static int __disable_irq_nosync(unsigned int irq)
581{
582 unsigned long flags;
583 struct irq_desc *desc = irq_get_desc_buslock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
584
585 if (!desc)
586 return -EINVAL;
587 __disable_irq(desc);
588 irq_put_desc_busunlock(desc, flags);
589 return 0;
590}
591
592/**
593 * disable_irq_nosync - disable an irq without waiting
594 * @irq: Interrupt to disable
595 *
596 * Disable the selected interrupt line. Disables and Enables are
597 * nested.
598 * Unlike disable_irq(), this function does not ensure existing
599 * instances of the IRQ handler have completed before returning.
600 *
601 * This function may be called from IRQ context.
602 */
603void disable_irq_nosync(unsigned int irq)
604{
605 __disable_irq_nosync(irq);
606}
607EXPORT_SYMBOL(disable_irq_nosync);
608
609/**
610 * disable_irq - disable an irq and wait for completion
611 * @irq: Interrupt to disable
612 *
613 * Disable the selected interrupt line. Enables and Disables are
614 * nested.
615 * This function waits for any pending IRQ handlers for this interrupt
616 * to complete before returning. If you use this function while
617 * holding a resource the IRQ handler may need you will deadlock.
618 *
619 * This function may be called - with care - from IRQ context.
620 */
621void disable_irq(unsigned int irq)
622{
623 if (!__disable_irq_nosync(irq))
624 synchronize_irq(irq);
625}
626EXPORT_SYMBOL(disable_irq);
627
628/**
629 * disable_hardirq - disables an irq and waits for hardirq completion
630 * @irq: Interrupt to disable
631 *
632 * Disable the selected interrupt line. Enables and Disables are
633 * nested.
634 * This function waits for any pending hard IRQ handlers for this
635 * interrupt to complete before returning. If you use this function while
636 * holding a resource the hard IRQ handler may need you will deadlock.
637 *
638 * When used to optimistically disable an interrupt from atomic context
639 * the return value must be checked.
640 *
641 * Returns: false if a threaded handler is active.
642 *
643 * This function may be called - with care - from IRQ context.
644 */
645bool disable_hardirq(unsigned int irq)
646{
647 if (!__disable_irq_nosync(irq))
648 return synchronize_hardirq(irq);
649
650 return false;
651}
652EXPORT_SYMBOL_GPL(disable_hardirq);
653
654/**
655 * disable_nmi_nosync - disable an nmi without waiting
656 * @irq: Interrupt to disable
657 *
658 * Disable the selected interrupt line. Disables and enables are
659 * nested.
660 * The interrupt to disable must have been requested through request_nmi.
661 * Unlike disable_nmi(), this function does not ensure existing
662 * instances of the IRQ handler have completed before returning.
663 */
664void disable_nmi_nosync(unsigned int irq)
665{
666 disable_irq_nosync(irq);
667}
668
669void __enable_irq(struct irq_desc *desc)
670{
671 switch (desc->depth) {
672 case 0:
673 err_out:
674 WARN(1, KERN_WARNING "Unbalanced enable for IRQ %d\n",
675 irq_desc_get_irq(desc));
676 break;
677 case 1: {
678 if (desc->istate & IRQS_SUSPENDED)
679 goto err_out;
680 /* Prevent probing on this irq: */
681 irq_settings_set_noprobe(desc);
682 /*
683 * Call irq_startup() not irq_enable() here because the
684 * interrupt might be marked NOAUTOEN. So irq_startup()
685 * needs to be invoked when it gets enabled the first
686 * time. If it was already started up, then irq_startup()
687 * will invoke irq_enable() under the hood.
688 */
689 irq_startup(desc, IRQ_RESEND, IRQ_START_FORCE);
690 break;
691 }
692 default:
693 desc->depth--;
694 }
695}
696
697/**
698 * enable_irq - enable handling of an irq
699 * @irq: Interrupt to enable
700 *
701 * Undoes the effect of one call to disable_irq(). If this
702 * matches the last disable, processing of interrupts on this
703 * IRQ line is re-enabled.
704 *
705 * This function may be called from IRQ context only when
706 * desc->irq_data.chip->bus_lock and desc->chip->bus_sync_unlock are NULL !
707 */
708void enable_irq(unsigned int irq)
709{
710 unsigned long flags;
711 struct irq_desc *desc = irq_get_desc_buslock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
712
713 if (!desc)
714 return;
715 if (WARN(!desc->irq_data.chip,
716 KERN_ERR "enable_irq before setup/request_irq: irq %u\n", irq))
717 goto out;
718
719 __enable_irq(desc);
720out:
721 irq_put_desc_busunlock(desc, flags);
722}
723EXPORT_SYMBOL(enable_irq);
724
725/**
726 * enable_nmi - enable handling of an nmi
727 * @irq: Interrupt to enable
728 *
729 * The interrupt to enable must have been requested through request_nmi.
730 * Undoes the effect of one call to disable_nmi(). If this
731 * matches the last disable, processing of interrupts on this
732 * IRQ line is re-enabled.
733 */
734void enable_nmi(unsigned int irq)
735{
736 enable_irq(irq);
737}
738
739static int set_irq_wake_real(unsigned int irq, unsigned int on)
740{
741 struct irq_desc *desc = irq_to_desc(irq);
742 int ret = -ENXIO;
743
744 if (irq_desc_get_chip(desc)->flags & IRQCHIP_SKIP_SET_WAKE)
745 return 0;
746
747 if (desc->irq_data.chip->irq_set_wake)
748 ret = desc->irq_data.chip->irq_set_wake(&desc->irq_data, on);
749
750 return ret;
751}
752
753/**
754 * irq_set_irq_wake - control irq power management wakeup
755 * @irq: interrupt to control
756 * @on: enable/disable power management wakeup
757 *
758 * Enable/disable power management wakeup mode, which is
759 * disabled by default. Enables and disables must match,
760 * just as they match for non-wakeup mode support.
761 *
762 * Wakeup mode lets this IRQ wake the system from sleep
763 * states like "suspend to RAM".
764 *
765 * Note: irq enable/disable state is completely orthogonal
766 * to the enable/disable state of irq wake. An irq can be
767 * disabled with disable_irq() and still wake the system as
768 * long as the irq has wake enabled. If this does not hold,
769 * then the underlying irq chip and the related driver need
770 * to be investigated.
771 */
772int irq_set_irq_wake(unsigned int irq, unsigned int on)
773{
774 unsigned long flags;
775 struct irq_desc *desc = irq_get_desc_buslock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
776 int ret = 0;
777
778 if (!desc)
779 return -EINVAL;
780
781 /* Don't use NMIs as wake up interrupts please */
782 if (desc->istate & IRQS_NMI) {
783 ret = -EINVAL;
784 goto out_unlock;
785 }
786
787 /* wakeup-capable irqs can be shared between drivers that
788 * don't need to have the same sleep mode behaviors.
789 */
790 if (on) {
791 if (desc->wake_depth++ == 0) {
792 ret = set_irq_wake_real(irq, on);
793 if (ret)
794 desc->wake_depth = 0;
795 else
796 irqd_set(&desc->irq_data, IRQD_WAKEUP_STATE);
797 }
798 } else {
799 if (desc->wake_depth == 0) {
800 WARN(1, "Unbalanced IRQ %d wake disable\n", irq);
801 } else if (--desc->wake_depth == 0) {
802 ret = set_irq_wake_real(irq, on);
803 if (ret)
804 desc->wake_depth = 1;
805 else
806 irqd_clear(&desc->irq_data, IRQD_WAKEUP_STATE);
807 }
808 }
809
810out_unlock:
811 irq_put_desc_busunlock(desc, flags);
812 return ret;
813}
814EXPORT_SYMBOL(irq_set_irq_wake);
815
816/*
817 * Internal function that tells the architecture code whether a
818 * particular irq has been exclusively allocated or is available
819 * for driver use.
820 */
821int can_request_irq(unsigned int irq, unsigned long irqflags)
822{
823 unsigned long flags;
824 struct irq_desc *desc = irq_get_desc_lock(irq, &flags, 0);
825 int canrequest = 0;
826
827 if (!desc)
828 return 0;
829
830 if (irq_settings_can_request(desc)) {
831 if (!desc->action ||
832 irqflags & desc->action->flags & IRQF_SHARED)
833 canrequest = 1;
834 }
835 irq_put_desc_unlock(desc, flags);
836 return canrequest;
837}
838
839int __irq_set_trigger(struct irq_desc *desc, unsigned long flags)
840{
841 struct irq_chip *chip = desc->irq_data.chip;
842 int ret, unmask = 0;
843
844 if (!chip || !chip->irq_set_type) {
845 /*
846 * IRQF_TRIGGER_* but the PIC does not support multiple
847 * flow-types?
848 */
849 pr_debug("No set_type function for IRQ %d (%s)\n",
850 irq_desc_get_irq(desc),
851 chip ? (chip->name ? : "unknown") : "unknown");
852 return 0;
853 }
854
855 if (chip->flags & IRQCHIP_SET_TYPE_MASKED) {
856 if (!irqd_irq_masked(&desc->irq_data))
857 mask_irq(desc);
858 if (!irqd_irq_disabled(&desc->irq_data))
859 unmask = 1;
860 }
861
862 /* Mask all flags except trigger mode */
863 flags &= IRQ_TYPE_SENSE_MASK;
864 ret = chip->irq_set_type(&desc->irq_data, flags);
865
866 switch (ret) {
867 case IRQ_SET_MASK_OK:
868 case IRQ_SET_MASK_OK_DONE:
869 irqd_clear(&desc->irq_data, IRQD_TRIGGER_MASK);
870 irqd_set(&desc->irq_data, flags);
871 fallthrough;
872
873 case IRQ_SET_MASK_OK_NOCOPY:
874 flags = irqd_get_trigger_type(&desc->irq_data);
875 irq_settings_set_trigger_mask(desc, flags);
876 irqd_clear(&desc->irq_data, IRQD_LEVEL);
877 irq_settings_clr_level(desc);
878 if (flags & IRQ_TYPE_LEVEL_MASK) {
879 irq_settings_set_level(desc);
880 irqd_set(&desc->irq_data, IRQD_LEVEL);
881 }
882
883 ret = 0;
884 break;
885 default:
886 pr_err("Setting trigger mode %lu for irq %u failed (%pS)\n",
887 flags, irq_desc_get_irq(desc), chip->irq_set_type);
888 }
889 if (unmask)
890 unmask_irq(desc);
891 return ret;
892}
893
894#ifdef CONFIG_HARDIRQS_SW_RESEND
895int irq_set_parent(int irq, int parent_irq)
896{
897 unsigned long flags;
898 struct irq_desc *desc = irq_get_desc_lock(irq, &flags, 0);
899
900 if (!desc)
901 return -EINVAL;
902
903 desc->parent_irq = parent_irq;
904
905 irq_put_desc_unlock(desc, flags);
906 return 0;
907}
908EXPORT_SYMBOL_GPL(irq_set_parent);
909#endif
910
911/*
912 * Default primary interrupt handler for threaded interrupts. Is
913 * assigned as primary handler when request_threaded_irq is called
914 * with handler == NULL. Useful for oneshot interrupts.
915 */
916static irqreturn_t irq_default_primary_handler(int irq, void *dev_id)
917{
918 return IRQ_WAKE_THREAD;
919}
920
921/*
922 * Primary handler for nested threaded interrupts. Should never be
923 * called.
924 */
925static irqreturn_t irq_nested_primary_handler(int irq, void *dev_id)
926{
927 WARN(1, "Primary handler called for nested irq %d\n", irq);
928 return IRQ_NONE;
929}
930
931static irqreturn_t irq_forced_secondary_handler(int irq, void *dev_id)
932{
933 WARN(1, "Secondary action handler called for irq %d\n", irq);
934 return IRQ_NONE;
935}
936
937static int irq_wait_for_interrupt(struct irqaction *action)
938{
939 for (;;) {
940 set_current_state(TASK_INTERRUPTIBLE);
941
942 if (kthread_should_stop()) {
943 /* may need to run one last time */
944 if (test_and_clear_bit(IRQTF_RUNTHREAD,
945 &action->thread_flags)) {
946 __set_current_state(TASK_RUNNING);
947 return 0;
948 }
949 __set_current_state(TASK_RUNNING);
950 return -1;
951 }
952
953 if (test_and_clear_bit(IRQTF_RUNTHREAD,
954 &action->thread_flags)) {
955 __set_current_state(TASK_RUNNING);
956 return 0;
957 }
958 schedule();
959 }
960}
961
962/*
963 * Oneshot interrupts keep the irq line masked until the threaded
964 * handler finished. unmask if the interrupt has not been disabled and
965 * is marked MASKED.
966 */
967static void irq_finalize_oneshot(struct irq_desc *desc,
968 struct irqaction *action)
969{
970 if (!(desc->istate & IRQS_ONESHOT) ||
971 action->handler == irq_forced_secondary_handler)
972 return;
973again:
974 chip_bus_lock(desc);
975 raw_spin_lock_irq(&desc->lock);
976
977 /*
978 * Implausible though it may be we need to protect us against
979 * the following scenario:
980 *
981 * The thread is faster done than the hard interrupt handler
982 * on the other CPU. If we unmask the irq line then the
983 * interrupt can come in again and masks the line, leaves due
984 * to IRQS_INPROGRESS and the irq line is masked forever.
985 *
986 * This also serializes the state of shared oneshot handlers
987 * versus "desc->threads_onehsot |= action->thread_mask;" in
988 * irq_wake_thread(). See the comment there which explains the
989 * serialization.
990 */
991 if (unlikely(irqd_irq_inprogress(&desc->irq_data))) {
992 raw_spin_unlock_irq(&desc->lock);
993 chip_bus_sync_unlock(desc);
994 cpu_relax();
995 goto again;
996 }
997
998 /*
999 * Now check again, whether the thread should run. Otherwise
1000 * we would clear the threads_oneshot bit of this thread which
1001 * was just set.
1002 */
1003 if (test_bit(IRQTF_RUNTHREAD, &action->thread_flags))
1004 goto out_unlock;
1005
1006 desc->threads_oneshot &= ~action->thread_mask;
1007
1008 if (!desc->threads_oneshot && !irqd_irq_disabled(&desc->irq_data) &&
1009 irqd_irq_masked(&desc->irq_data))
1010 unmask_threaded_irq(desc);
1011
1012out_unlock:
1013 raw_spin_unlock_irq(&desc->lock);
1014 chip_bus_sync_unlock(desc);
1015}
1016
1017#ifdef CONFIG_SMP
1018/*
1019 * Check whether we need to change the affinity of the interrupt thread.
1020 */
1021static void
1022irq_thread_check_affinity(struct irq_desc *desc, struct irqaction *action)
1023{
1024 cpumask_var_t mask;
1025 bool valid = true;
1026
1027 if (!test_and_clear_bit(IRQTF_AFFINITY, &action->thread_flags))
1028 return;
1029
1030 /*
1031 * In case we are out of memory we set IRQTF_AFFINITY again and
1032 * try again next time
1033 */
1034 if (!alloc_cpumask_var(&mask, GFP_KERNEL)) {
1035 set_bit(IRQTF_AFFINITY, &action->thread_flags);
1036 return;
1037 }
1038
1039 raw_spin_lock_irq(&desc->lock);
1040 /*
1041 * This code is triggered unconditionally. Check the affinity
1042 * mask pointer. For CPU_MASK_OFFSTACK=n this is optimized out.
1043 */
1044 if (cpumask_available(desc->irq_common_data.affinity)) {
1045 const struct cpumask *m;
1046
1047 m = irq_data_get_effective_affinity_mask(&desc->irq_data);
1048 cpumask_copy(mask, m);
1049 } else {
1050 valid = false;
1051 }
1052 raw_spin_unlock_irq(&desc->lock);
1053
1054 if (valid)
1055 set_cpus_allowed_ptr(current, mask);
1056 free_cpumask_var(mask);
1057}
1058#else
1059static inline void
1060irq_thread_check_affinity(struct irq_desc *desc, struct irqaction *action) { }
1061#endif
1062
1063/*
1064 * Interrupts which are not explicitly requested as threaded
1065 * interrupts rely on the implicit bh/preempt disable of the hard irq
1066 * context. So we need to disable bh here to avoid deadlocks and other
1067 * side effects.
1068 */
1069static irqreturn_t
1070irq_forced_thread_fn(struct irq_desc *desc, struct irqaction *action)
1071{
1072 irqreturn_t ret;
1073
1074 local_bh_disable();
1075 ret = action->thread_fn(action->irq, action->dev_id);
1076 if (ret == IRQ_HANDLED)
1077 atomic_inc(&desc->threads_handled);
1078
1079 irq_finalize_oneshot(desc, action);
1080 local_bh_enable();
1081 return ret;
1082}
1083
1084/*
1085 * Interrupts explicitly requested as threaded interrupts want to be
1086 * preemtible - many of them need to sleep and wait for slow busses to
1087 * complete.
1088 */
1089static irqreturn_t irq_thread_fn(struct irq_desc *desc,
1090 struct irqaction *action)
1091{
1092 irqreturn_t ret;
1093
1094 ret = action->thread_fn(action->irq, action->dev_id);
1095 if (ret == IRQ_HANDLED)
1096 atomic_inc(&desc->threads_handled);
1097
1098 irq_finalize_oneshot(desc, action);
1099 return ret;
1100}
1101
1102static void wake_threads_waitq(struct irq_desc *desc)
1103{
1104 if (atomic_dec_and_test(&desc->threads_active))
1105 wake_up(&desc->wait_for_threads);
1106}
1107
1108static void irq_thread_dtor(struct callback_head *unused)
1109{
1110 struct task_struct *tsk = current;
1111 struct irq_desc *desc;
1112 struct irqaction *action;
1113
1114 if (WARN_ON_ONCE(!(current->flags & PF_EXITING)))
1115 return;
1116
1117 action = kthread_data(tsk);
1118
1119 pr_err("exiting task \"%s\" (%d) is an active IRQ thread (irq %d)\n",
1120 tsk->comm, tsk->pid, action->irq);
1121
1122
1123 desc = irq_to_desc(action->irq);
1124 /*
1125 * If IRQTF_RUNTHREAD is set, we need to decrement
1126 * desc->threads_active and wake possible waiters.
1127 */
1128 if (test_and_clear_bit(IRQTF_RUNTHREAD, &action->thread_flags))
1129 wake_threads_waitq(desc);
1130
1131 /* Prevent a stale desc->threads_oneshot */
1132 irq_finalize_oneshot(desc, action);
1133}
1134
1135static void irq_wake_secondary(struct irq_desc *desc, struct irqaction *action)
1136{
1137 struct irqaction *secondary = action->secondary;
1138
1139 if (WARN_ON_ONCE(!secondary))
1140 return;
1141
1142 raw_spin_lock_irq(&desc->lock);
1143 __irq_wake_thread(desc, secondary);
1144 raw_spin_unlock_irq(&desc->lock);
1145}
1146
1147/*
1148 * Interrupt handler thread
1149 */
1150static int irq_thread(void *data)
1151{
1152 struct callback_head on_exit_work;
1153 struct irqaction *action = data;
1154 struct irq_desc *desc = irq_to_desc(action->irq);
1155 irqreturn_t (*handler_fn)(struct irq_desc *desc,
1156 struct irqaction *action);
1157
1158 if (force_irqthreads && test_bit(IRQTF_FORCED_THREAD,
1159 &action->thread_flags))
1160 handler_fn = irq_forced_thread_fn;
1161 else
1162 handler_fn = irq_thread_fn;
1163
1164 init_task_work(&on_exit_work, irq_thread_dtor);
1165 task_work_add(current, &on_exit_work, false);
1166
1167 irq_thread_check_affinity(desc, action);
1168
1169 while (!irq_wait_for_interrupt(action)) {
1170 irqreturn_t action_ret;
1171
1172 irq_thread_check_affinity(desc, action);
1173
1174 action_ret = handler_fn(desc, action);
1175 if (action_ret == IRQ_WAKE_THREAD)
1176 irq_wake_secondary(desc, action);
1177
1178 wake_threads_waitq(desc);
1179 }
1180
1181 /*
1182 * This is the regular exit path. __free_irq() is stopping the
1183 * thread via kthread_stop() after calling
1184 * synchronize_hardirq(). So neither IRQTF_RUNTHREAD nor the
1185 * oneshot mask bit can be set.
1186 */
1187 task_work_cancel(current, irq_thread_dtor);
1188 return 0;
1189}
1190
1191/**
1192 * irq_wake_thread - wake the irq thread for the action identified by dev_id
1193 * @irq: Interrupt line
1194 * @dev_id: Device identity for which the thread should be woken
1195 *
1196 */
1197void irq_wake_thread(unsigned int irq, void *dev_id)
1198{
1199 struct irq_desc *desc = irq_to_desc(irq);
1200 struct irqaction *action;
1201 unsigned long flags;
1202
1203 if (!desc || WARN_ON(irq_settings_is_per_cpu_devid(desc)))
1204 return;
1205
1206 raw_spin_lock_irqsave(&desc->lock, flags);
1207 for_each_action_of_desc(desc, action) {
1208 if (action->dev_id == dev_id) {
1209 if (action->thread)
1210 __irq_wake_thread(desc, action);
1211 break;
1212 }
1213 }
1214 raw_spin_unlock_irqrestore(&desc->lock, flags);
1215}
1216EXPORT_SYMBOL_GPL(irq_wake_thread);
1217
1218static int irq_setup_forced_threading(struct irqaction *new)
1219{
1220 if (!force_irqthreads)
1221 return 0;
1222 if (new->flags & (IRQF_NO_THREAD | IRQF_PERCPU | IRQF_ONESHOT))
1223 return 0;
1224
1225 /*
1226 * No further action required for interrupts which are requested as
1227 * threaded interrupts already
1228 */
1229 if (new->handler == irq_default_primary_handler)
1230 return 0;
1231
1232 new->flags |= IRQF_ONESHOT;
1233
1234 /*
1235 * Handle the case where we have a real primary handler and a
1236 * thread handler. We force thread them as well by creating a
1237 * secondary action.
1238 */
1239 if (new->handler && new->thread_fn) {
1240 /* Allocate the secondary action */
1241 new->secondary = kzalloc(sizeof(struct irqaction), GFP_KERNEL);
1242 if (!new->secondary)
1243 return -ENOMEM;
1244 new->secondary->handler = irq_forced_secondary_handler;
1245 new->secondary->thread_fn = new->thread_fn;
1246 new->secondary->dev_id = new->dev_id;
1247 new->secondary->irq = new->irq;
1248 new->secondary->name = new->name;
1249 }
1250 /* Deal with the primary handler */
1251 set_bit(IRQTF_FORCED_THREAD, &new->thread_flags);
1252 new->thread_fn = new->handler;
1253 new->handler = irq_default_primary_handler;
1254 return 0;
1255}
1256
1257static int irq_request_resources(struct irq_desc *desc)
1258{
1259 struct irq_data *d = &desc->irq_data;
1260 struct irq_chip *c = d->chip;
1261
1262 return c->irq_request_resources ? c->irq_request_resources(d) : 0;
1263}
1264
1265static void irq_release_resources(struct irq_desc *desc)
1266{
1267 struct irq_data *d = &desc->irq_data;
1268 struct irq_chip *c = d->chip;
1269
1270 if (c->irq_release_resources)
1271 c->irq_release_resources(d);
1272}
1273
1274static bool irq_supports_nmi(struct irq_desc *desc)
1275{
1276 struct irq_data *d = irq_desc_get_irq_data(desc);
1277
1278#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
1279 /* Only IRQs directly managed by the root irqchip can be set as NMI */
1280 if (d->parent_data)
1281 return false;
1282#endif
1283 /* Don't support NMIs for chips behind a slow bus */
1284 if (d->chip->irq_bus_lock || d->chip->irq_bus_sync_unlock)
1285 return false;
1286
1287 return d->chip->flags & IRQCHIP_SUPPORTS_NMI;
1288}
1289
1290static int irq_nmi_setup(struct irq_desc *desc)
1291{
1292 struct irq_data *d = irq_desc_get_irq_data(desc);
1293 struct irq_chip *c = d->chip;
1294
1295 return c->irq_nmi_setup ? c->irq_nmi_setup(d) : -EINVAL;
1296}
1297
1298static void irq_nmi_teardown(struct irq_desc *desc)
1299{
1300 struct irq_data *d = irq_desc_get_irq_data(desc);
1301 struct irq_chip *c = d->chip;
1302
1303 if (c->irq_nmi_teardown)
1304 c->irq_nmi_teardown(d);
1305}
1306
1307static int
1308setup_irq_thread(struct irqaction *new, unsigned int irq, bool secondary)
1309{
1310 struct task_struct *t;
1311
1312 if (!secondary) {
1313 t = kthread_create(irq_thread, new, "irq/%d-%s", irq,
1314 new->name);
1315 } else {
1316 t = kthread_create(irq_thread, new, "irq/%d-s-%s", irq,
1317 new->name);
1318 }
1319
1320 if (IS_ERR(t))
1321 return PTR_ERR(t);
1322
1323 sched_set_fifo(t);
1324
1325 /*
1326 * We keep the reference to the task struct even if
1327 * the thread dies to avoid that the interrupt code
1328 * references an already freed task_struct.
1329 */
1330 new->thread = get_task_struct(t);
1331 /*
1332 * Tell the thread to set its affinity. This is
1333 * important for shared interrupt handlers as we do
1334 * not invoke setup_affinity() for the secondary
1335 * handlers as everything is already set up. Even for
1336 * interrupts marked with IRQF_NO_BALANCE this is
1337 * correct as we want the thread to move to the cpu(s)
1338 * on which the requesting code placed the interrupt.
1339 */
1340 set_bit(IRQTF_AFFINITY, &new->thread_flags);
1341 return 0;
1342}
1343
1344/*
1345 * Internal function to register an irqaction - typically used to
1346 * allocate special interrupts that are part of the architecture.
1347 *
1348 * Locking rules:
1349 *
1350 * desc->request_mutex Provides serialization against a concurrent free_irq()
1351 * chip_bus_lock Provides serialization for slow bus operations
1352 * desc->lock Provides serialization against hard interrupts
1353 *
1354 * chip_bus_lock and desc->lock are sufficient for all other management and
1355 * interrupt related functions. desc->request_mutex solely serializes
1356 * request/free_irq().
1357 */
1358static int
1359__setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new)
1360{
1361 struct irqaction *old, **old_ptr;
1362 unsigned long flags, thread_mask = 0;
1363 int ret, nested, shared = 0;
1364
1365 if (!desc)
1366 return -EINVAL;
1367
1368 if (desc->irq_data.chip == &no_irq_chip)
1369 return -ENOSYS;
1370 if (!try_module_get(desc->owner))
1371 return -ENODEV;
1372
1373 new->irq = irq;
1374
1375 /*
1376 * If the trigger type is not specified by the caller,
1377 * then use the default for this interrupt.
1378 */
1379 if (!(new->flags & IRQF_TRIGGER_MASK))
1380 new->flags |= irqd_get_trigger_type(&desc->irq_data);
1381
1382 /*
1383 * Check whether the interrupt nests into another interrupt
1384 * thread.
1385 */
1386 nested = irq_settings_is_nested_thread(desc);
1387 if (nested) {
1388 if (!new->thread_fn) {
1389 ret = -EINVAL;
1390 goto out_mput;
1391 }
1392 /*
1393 * Replace the primary handler which was provided from
1394 * the driver for non nested interrupt handling by the
1395 * dummy function which warns when called.
1396 */
1397 new->handler = irq_nested_primary_handler;
1398 } else {
1399 if (irq_settings_can_thread(desc)) {
1400 ret = irq_setup_forced_threading(new);
1401 if (ret)
1402 goto out_mput;
1403 }
1404 }
1405
1406 /*
1407 * Create a handler thread when a thread function is supplied
1408 * and the interrupt does not nest into another interrupt
1409 * thread.
1410 */
1411 if (new->thread_fn && !nested) {
1412 ret = setup_irq_thread(new, irq, false);
1413 if (ret)
1414 goto out_mput;
1415 if (new->secondary) {
1416 ret = setup_irq_thread(new->secondary, irq, true);
1417 if (ret)
1418 goto out_thread;
1419 }
1420 }
1421
1422 /*
1423 * Drivers are often written to work w/o knowledge about the
1424 * underlying irq chip implementation, so a request for a
1425 * threaded irq without a primary hard irq context handler
1426 * requires the ONESHOT flag to be set. Some irq chips like
1427 * MSI based interrupts are per se one shot safe. Check the
1428 * chip flags, so we can avoid the unmask dance at the end of
1429 * the threaded handler for those.
1430 */
1431 if (desc->irq_data.chip->flags & IRQCHIP_ONESHOT_SAFE)
1432 new->flags &= ~IRQF_ONESHOT;
1433
1434 /*
1435 * Protects against a concurrent __free_irq() call which might wait
1436 * for synchronize_hardirq() to complete without holding the optional
1437 * chip bus lock and desc->lock. Also protects against handing out
1438 * a recycled oneshot thread_mask bit while it's still in use by
1439 * its previous owner.
1440 */
1441 mutex_lock(&desc->request_mutex);
1442
1443 /*
1444 * Acquire bus lock as the irq_request_resources() callback below
1445 * might rely on the serialization or the magic power management
1446 * functions which are abusing the irq_bus_lock() callback,
1447 */
1448 chip_bus_lock(desc);
1449
1450 /* First installed action requests resources. */
1451 if (!desc->action) {
1452 ret = irq_request_resources(desc);
1453 if (ret) {
1454 pr_err("Failed to request resources for %s (irq %d) on irqchip %s\n",
1455 new->name, irq, desc->irq_data.chip->name);
1456 goto out_bus_unlock;
1457 }
1458 }
1459
1460 /*
1461 * The following block of code has to be executed atomically
1462 * protected against a concurrent interrupt and any of the other
1463 * management calls which are not serialized via
1464 * desc->request_mutex or the optional bus lock.
1465 */
1466 raw_spin_lock_irqsave(&desc->lock, flags);
1467 old_ptr = &desc->action;
1468 old = *old_ptr;
1469 if (old) {
1470 /*
1471 * Can't share interrupts unless both agree to and are
1472 * the same type (level, edge, polarity). So both flag
1473 * fields must have IRQF_SHARED set and the bits which
1474 * set the trigger type must match. Also all must
1475 * agree on ONESHOT.
1476 * Interrupt lines used for NMIs cannot be shared.
1477 */
1478 unsigned int oldtype;
1479
1480 if (desc->istate & IRQS_NMI) {
1481 pr_err("Invalid attempt to share NMI for %s (irq %d) on irqchip %s.\n",
1482 new->name, irq, desc->irq_data.chip->name);
1483 ret = -EINVAL;
1484 goto out_unlock;
1485 }
1486
1487 /*
1488 * If nobody did set the configuration before, inherit
1489 * the one provided by the requester.
1490 */
1491 if (irqd_trigger_type_was_set(&desc->irq_data)) {
1492 oldtype = irqd_get_trigger_type(&desc->irq_data);
1493 } else {
1494 oldtype = new->flags & IRQF_TRIGGER_MASK;
1495 irqd_set_trigger_type(&desc->irq_data, oldtype);
1496 }
1497
1498 if (!((old->flags & new->flags) & IRQF_SHARED) ||
1499 (oldtype != (new->flags & IRQF_TRIGGER_MASK)) ||
1500 ((old->flags ^ new->flags) & IRQF_ONESHOT))
1501 goto mismatch;
1502
1503 /* All handlers must agree on per-cpuness */
1504 if ((old->flags & IRQF_PERCPU) !=
1505 (new->flags & IRQF_PERCPU))
1506 goto mismatch;
1507
1508 /* add new interrupt at end of irq queue */
1509 do {
1510 /*
1511 * Or all existing action->thread_mask bits,
1512 * so we can find the next zero bit for this
1513 * new action.
1514 */
1515 thread_mask |= old->thread_mask;
1516 old_ptr = &old->next;
1517 old = *old_ptr;
1518 } while (old);
1519 shared = 1;
1520 }
1521
1522 /*
1523 * Setup the thread mask for this irqaction for ONESHOT. For
1524 * !ONESHOT irqs the thread mask is 0 so we can avoid a
1525 * conditional in irq_wake_thread().
1526 */
1527 if (new->flags & IRQF_ONESHOT) {
1528 /*
1529 * Unlikely to have 32 resp 64 irqs sharing one line,
1530 * but who knows.
1531 */
1532 if (thread_mask == ~0UL) {
1533 ret = -EBUSY;
1534 goto out_unlock;
1535 }
1536 /*
1537 * The thread_mask for the action is or'ed to
1538 * desc->thread_active to indicate that the
1539 * IRQF_ONESHOT thread handler has been woken, but not
1540 * yet finished. The bit is cleared when a thread
1541 * completes. When all threads of a shared interrupt
1542 * line have completed desc->threads_active becomes
1543 * zero and the interrupt line is unmasked. See
1544 * handle.c:irq_wake_thread() for further information.
1545 *
1546 * If no thread is woken by primary (hard irq context)
1547 * interrupt handlers, then desc->threads_active is
1548 * also checked for zero to unmask the irq line in the
1549 * affected hard irq flow handlers
1550 * (handle_[fasteoi|level]_irq).
1551 *
1552 * The new action gets the first zero bit of
1553 * thread_mask assigned. See the loop above which or's
1554 * all existing action->thread_mask bits.
1555 */
1556 new->thread_mask = 1UL << ffz(thread_mask);
1557
1558 } else if (new->handler == irq_default_primary_handler &&
1559 !(desc->irq_data.chip->flags & IRQCHIP_ONESHOT_SAFE)) {
1560 /*
1561 * The interrupt was requested with handler = NULL, so
1562 * we use the default primary handler for it. But it
1563 * does not have the oneshot flag set. In combination
1564 * with level interrupts this is deadly, because the
1565 * default primary handler just wakes the thread, then
1566 * the irq lines is reenabled, but the device still
1567 * has the level irq asserted. Rinse and repeat....
1568 *
1569 * While this works for edge type interrupts, we play
1570 * it safe and reject unconditionally because we can't
1571 * say for sure which type this interrupt really
1572 * has. The type flags are unreliable as the
1573 * underlying chip implementation can override them.
1574 */
1575 pr_err("Threaded irq requested with handler=NULL and !ONESHOT for %s (irq %d)\n",
1576 new->name, irq);
1577 ret = -EINVAL;
1578 goto out_unlock;
1579 }
1580
1581 if (!shared) {
1582 init_waitqueue_head(&desc->wait_for_threads);
1583
1584 /* Setup the type (level, edge polarity) if configured: */
1585 if (new->flags & IRQF_TRIGGER_MASK) {
1586 ret = __irq_set_trigger(desc,
1587 new->flags & IRQF_TRIGGER_MASK);
1588
1589 if (ret)
1590 goto out_unlock;
1591 }
1592
1593 /*
1594 * Activate the interrupt. That activation must happen
1595 * independently of IRQ_NOAUTOEN. request_irq() can fail
1596 * and the callers are supposed to handle
1597 * that. enable_irq() of an interrupt requested with
1598 * IRQ_NOAUTOEN is not supposed to fail. The activation
1599 * keeps it in shutdown mode, it merily associates
1600 * resources if necessary and if that's not possible it
1601 * fails. Interrupts which are in managed shutdown mode
1602 * will simply ignore that activation request.
1603 */
1604 ret = irq_activate(desc);
1605 if (ret)
1606 goto out_unlock;
1607
1608 desc->istate &= ~(IRQS_AUTODETECT | IRQS_SPURIOUS_DISABLED | \
1609 IRQS_ONESHOT | IRQS_WAITING);
1610 irqd_clear(&desc->irq_data, IRQD_IRQ_INPROGRESS);
1611
1612 if (new->flags & IRQF_PERCPU) {
1613 irqd_set(&desc->irq_data, IRQD_PER_CPU);
1614 irq_settings_set_per_cpu(desc);
1615 }
1616
1617 if (new->flags & IRQF_ONESHOT)
1618 desc->istate |= IRQS_ONESHOT;
1619
1620 /* Exclude IRQ from balancing if requested */
1621 if (new->flags & IRQF_NOBALANCING) {
1622 irq_settings_set_no_balancing(desc);
1623 irqd_set(&desc->irq_data, IRQD_NO_BALANCING);
1624 }
1625
1626 if (irq_settings_can_autoenable(desc)) {
1627 irq_startup(desc, IRQ_RESEND, IRQ_START_COND);
1628 } else {
1629 /*
1630 * Shared interrupts do not go well with disabling
1631 * auto enable. The sharing interrupt might request
1632 * it while it's still disabled and then wait for
1633 * interrupts forever.
1634 */
1635 WARN_ON_ONCE(new->flags & IRQF_SHARED);
1636 /* Undo nested disables: */
1637 desc->depth = 1;
1638 }
1639
1640 } else if (new->flags & IRQF_TRIGGER_MASK) {
1641 unsigned int nmsk = new->flags & IRQF_TRIGGER_MASK;
1642 unsigned int omsk = irqd_get_trigger_type(&desc->irq_data);
1643
1644 if (nmsk != omsk)
1645 /* hope the handler works with current trigger mode */
1646 pr_warn("irq %d uses trigger mode %u; requested %u\n",
1647 irq, omsk, nmsk);
1648 }
1649
1650 *old_ptr = new;
1651
1652 irq_pm_install_action(desc, new);
1653
1654 /* Reset broken irq detection when installing new handler */
1655 desc->irq_count = 0;
1656 desc->irqs_unhandled = 0;
1657
1658 /*
1659 * Check whether we disabled the irq via the spurious handler
1660 * before. Reenable it and give it another chance.
1661 */
1662 if (shared && (desc->istate & IRQS_SPURIOUS_DISABLED)) {
1663 desc->istate &= ~IRQS_SPURIOUS_DISABLED;
1664 __enable_irq(desc);
1665 }
1666
1667 raw_spin_unlock_irqrestore(&desc->lock, flags);
1668 chip_bus_sync_unlock(desc);
1669 mutex_unlock(&desc->request_mutex);
1670
1671 irq_setup_timings(desc, new);
1672
1673 /*
1674 * Strictly no need to wake it up, but hung_task complains
1675 * when no hard interrupt wakes the thread up.
1676 */
1677 if (new->thread)
1678 wake_up_process(new->thread);
1679 if (new->secondary)
1680 wake_up_process(new->secondary->thread);
1681
1682 register_irq_proc(irq, desc);
1683 new->dir = NULL;
1684 register_handler_proc(irq, new);
1685 return 0;
1686
1687mismatch:
1688 if (!(new->flags & IRQF_PROBE_SHARED)) {
1689 pr_err("Flags mismatch irq %d. %08x (%s) vs. %08x (%s)\n",
1690 irq, new->flags, new->name, old->flags, old->name);
1691#ifdef CONFIG_DEBUG_SHIRQ
1692 dump_stack();
1693#endif
1694 }
1695 ret = -EBUSY;
1696
1697out_unlock:
1698 raw_spin_unlock_irqrestore(&desc->lock, flags);
1699
1700 if (!desc->action)
1701 irq_release_resources(desc);
1702out_bus_unlock:
1703 chip_bus_sync_unlock(desc);
1704 mutex_unlock(&desc->request_mutex);
1705
1706out_thread:
1707 if (new->thread) {
1708 struct task_struct *t = new->thread;
1709
1710 new->thread = NULL;
1711 kthread_stop(t);
1712 put_task_struct(t);
1713 }
1714 if (new->secondary && new->secondary->thread) {
1715 struct task_struct *t = new->secondary->thread;
1716
1717 new->secondary->thread = NULL;
1718 kthread_stop(t);
1719 put_task_struct(t);
1720 }
1721out_mput:
1722 module_put(desc->owner);
1723 return ret;
1724}
1725
1726/*
1727 * Internal function to unregister an irqaction - used to free
1728 * regular and special interrupts that are part of the architecture.
1729 */
1730static struct irqaction *__free_irq(struct irq_desc *desc, void *dev_id)
1731{
1732 unsigned irq = desc->irq_data.irq;
1733 struct irqaction *action, **action_ptr;
1734 unsigned long flags;
1735
1736 WARN(in_interrupt(), "Trying to free IRQ %d from IRQ context!\n", irq);
1737
1738 mutex_lock(&desc->request_mutex);
1739 chip_bus_lock(desc);
1740 raw_spin_lock_irqsave(&desc->lock, flags);
1741
1742 /*
1743 * There can be multiple actions per IRQ descriptor, find the right
1744 * one based on the dev_id:
1745 */
1746 action_ptr = &desc->action;
1747 for (;;) {
1748 action = *action_ptr;
1749
1750 if (!action) {
1751 WARN(1, "Trying to free already-free IRQ %d\n", irq);
1752 raw_spin_unlock_irqrestore(&desc->lock, flags);
1753 chip_bus_sync_unlock(desc);
1754 mutex_unlock(&desc->request_mutex);
1755 return NULL;
1756 }
1757
1758 if (action->dev_id == dev_id)
1759 break;
1760 action_ptr = &action->next;
1761 }
1762
1763 /* Found it - now remove it from the list of entries: */
1764 *action_ptr = action->next;
1765
1766 irq_pm_remove_action(desc, action);
1767
1768 /* If this was the last handler, shut down the IRQ line: */
1769 if (!desc->action) {
1770 irq_settings_clr_disable_unlazy(desc);
1771 /* Only shutdown. Deactivate after synchronize_hardirq() */
1772 irq_shutdown(desc);
1773 }
1774
1775#ifdef CONFIG_SMP
1776 /* make sure affinity_hint is cleaned up */
1777 if (WARN_ON_ONCE(desc->affinity_hint))
1778 desc->affinity_hint = NULL;
1779#endif
1780
1781 raw_spin_unlock_irqrestore(&desc->lock, flags);
1782 /*
1783 * Drop bus_lock here so the changes which were done in the chip
1784 * callbacks above are synced out to the irq chips which hang
1785 * behind a slow bus (I2C, SPI) before calling synchronize_hardirq().
1786 *
1787 * Aside of that the bus_lock can also be taken from the threaded
1788 * handler in irq_finalize_oneshot() which results in a deadlock
1789 * because kthread_stop() would wait forever for the thread to
1790 * complete, which is blocked on the bus lock.
1791 *
1792 * The still held desc->request_mutex() protects against a
1793 * concurrent request_irq() of this irq so the release of resources
1794 * and timing data is properly serialized.
1795 */
1796 chip_bus_sync_unlock(desc);
1797
1798 unregister_handler_proc(irq, action);
1799
1800 /*
1801 * Make sure it's not being used on another CPU and if the chip
1802 * supports it also make sure that there is no (not yet serviced)
1803 * interrupt in flight at the hardware level.
1804 */
1805 __synchronize_hardirq(desc, true);
1806
1807#ifdef CONFIG_DEBUG_SHIRQ
1808 /*
1809 * It's a shared IRQ -- the driver ought to be prepared for an IRQ
1810 * event to happen even now it's being freed, so let's make sure that
1811 * is so by doing an extra call to the handler ....
1812 *
1813 * ( We do this after actually deregistering it, to make sure that a
1814 * 'real' IRQ doesn't run in parallel with our fake. )
1815 */
1816 if (action->flags & IRQF_SHARED) {
1817 local_irq_save(flags);
1818 action->handler(irq, dev_id);
1819 local_irq_restore(flags);
1820 }
1821#endif
1822
1823 /*
1824 * The action has already been removed above, but the thread writes
1825 * its oneshot mask bit when it completes. Though request_mutex is
1826 * held across this which prevents __setup_irq() from handing out
1827 * the same bit to a newly requested action.
1828 */
1829 if (action->thread) {
1830 kthread_stop(action->thread);
1831 put_task_struct(action->thread);
1832 if (action->secondary && action->secondary->thread) {
1833 kthread_stop(action->secondary->thread);
1834 put_task_struct(action->secondary->thread);
1835 }
1836 }
1837
1838 /* Last action releases resources */
1839 if (!desc->action) {
1840 /*
1841 * Reaquire bus lock as irq_release_resources() might
1842 * require it to deallocate resources over the slow bus.
1843 */
1844 chip_bus_lock(desc);
1845 /*
1846 * There is no interrupt on the fly anymore. Deactivate it
1847 * completely.
1848 */
1849 raw_spin_lock_irqsave(&desc->lock, flags);
1850 irq_domain_deactivate_irq(&desc->irq_data);
1851 raw_spin_unlock_irqrestore(&desc->lock, flags);
1852
1853 irq_release_resources(desc);
1854 chip_bus_sync_unlock(desc);
1855 irq_remove_timings(desc);
1856 }
1857
1858 mutex_unlock(&desc->request_mutex);
1859
1860 irq_chip_pm_put(&desc->irq_data);
1861 module_put(desc->owner);
1862 kfree(action->secondary);
1863 return action;
1864}
1865
1866/**
1867 * free_irq - free an interrupt allocated with request_irq
1868 * @irq: Interrupt line to free
1869 * @dev_id: Device identity to free
1870 *
1871 * Remove an interrupt handler. The handler is removed and if the
1872 * interrupt line is no longer in use by any driver it is disabled.
1873 * On a shared IRQ the caller must ensure the interrupt is disabled
1874 * on the card it drives before calling this function. The function
1875 * does not return until any executing interrupts for this IRQ
1876 * have completed.
1877 *
1878 * This function must not be called from interrupt context.
1879 *
1880 * Returns the devname argument passed to request_irq.
1881 */
1882const void *free_irq(unsigned int irq, void *dev_id)
1883{
1884 struct irq_desc *desc = irq_to_desc(irq);
1885 struct irqaction *action;
1886 const char *devname;
1887
1888 if (!desc || WARN_ON(irq_settings_is_per_cpu_devid(desc)))
1889 return NULL;
1890
1891#ifdef CONFIG_SMP
1892 if (WARN_ON(desc->affinity_notify))
1893 desc->affinity_notify = NULL;
1894#endif
1895
1896 action = __free_irq(desc, dev_id);
1897
1898 if (!action)
1899 return NULL;
1900
1901 devname = action->name;
1902 kfree(action);
1903 return devname;
1904}
1905EXPORT_SYMBOL(free_irq);
1906
1907/* This function must be called with desc->lock held */
1908static const void *__cleanup_nmi(unsigned int irq, struct irq_desc *desc)
1909{
1910 const char *devname = NULL;
1911
1912 desc->istate &= ~IRQS_NMI;
1913
1914 if (!WARN_ON(desc->action == NULL)) {
1915 irq_pm_remove_action(desc, desc->action);
1916 devname = desc->action->name;
1917 unregister_handler_proc(irq, desc->action);
1918
1919 kfree(desc->action);
1920 desc->action = NULL;
1921 }
1922
1923 irq_settings_clr_disable_unlazy(desc);
1924 irq_shutdown_and_deactivate(desc);
1925
1926 irq_release_resources(desc);
1927
1928 irq_chip_pm_put(&desc->irq_data);
1929 module_put(desc->owner);
1930
1931 return devname;
1932}
1933
1934const void *free_nmi(unsigned int irq, void *dev_id)
1935{
1936 struct irq_desc *desc = irq_to_desc(irq);
1937 unsigned long flags;
1938 const void *devname;
1939
1940 if (!desc || WARN_ON(!(desc->istate & IRQS_NMI)))
1941 return NULL;
1942
1943 if (WARN_ON(irq_settings_is_per_cpu_devid(desc)))
1944 return NULL;
1945
1946 /* NMI still enabled */
1947 if (WARN_ON(desc->depth == 0))
1948 disable_nmi_nosync(irq);
1949
1950 raw_spin_lock_irqsave(&desc->lock, flags);
1951
1952 irq_nmi_teardown(desc);
1953 devname = __cleanup_nmi(irq, desc);
1954
1955 raw_spin_unlock_irqrestore(&desc->lock, flags);
1956
1957 return devname;
1958}
1959
1960/**
1961 * request_threaded_irq - allocate an interrupt line
1962 * @irq: Interrupt line to allocate
1963 * @handler: Function to be called when the IRQ occurs.
1964 * Primary handler for threaded interrupts
1965 * If NULL and thread_fn != NULL the default
1966 * primary handler is installed
1967 * @thread_fn: Function called from the irq handler thread
1968 * If NULL, no irq thread is created
1969 * @irqflags: Interrupt type flags
1970 * @devname: An ascii name for the claiming device
1971 * @dev_id: A cookie passed back to the handler function
1972 *
1973 * This call allocates interrupt resources and enables the
1974 * interrupt line and IRQ handling. From the point this
1975 * call is made your handler function may be invoked. Since
1976 * your handler function must clear any interrupt the board
1977 * raises, you must take care both to initialise your hardware
1978 * and to set up the interrupt handler in the right order.
1979 *
1980 * If you want to set up a threaded irq handler for your device
1981 * then you need to supply @handler and @thread_fn. @handler is
1982 * still called in hard interrupt context and has to check
1983 * whether the interrupt originates from the device. If yes it
1984 * needs to disable the interrupt on the device and return
1985 * IRQ_WAKE_THREAD which will wake up the handler thread and run
1986 * @thread_fn. This split handler design is necessary to support
1987 * shared interrupts.
1988 *
1989 * Dev_id must be globally unique. Normally the address of the
1990 * device data structure is used as the cookie. Since the handler
1991 * receives this value it makes sense to use it.
1992 *
1993 * If your interrupt is shared you must pass a non NULL dev_id
1994 * as this is required when freeing the interrupt.
1995 *
1996 * Flags:
1997 *
1998 * IRQF_SHARED Interrupt is shared
1999 * IRQF_TRIGGER_* Specify active edge(s) or level
2000 *
2001 */
2002int request_threaded_irq(unsigned int irq, irq_handler_t handler,
2003 irq_handler_t thread_fn, unsigned long irqflags,
2004 const char *devname, void *dev_id)
2005{
2006 struct irqaction *action;
2007 struct irq_desc *desc;
2008 int retval;
2009
2010 if (irq == IRQ_NOTCONNECTED)
2011 return -ENOTCONN;
2012
2013 /*
2014 * Sanity-check: shared interrupts must pass in a real dev-ID,
2015 * otherwise we'll have trouble later trying to figure out
2016 * which interrupt is which (messes up the interrupt freeing
2017 * logic etc).
2018 *
2019 * Also IRQF_COND_SUSPEND only makes sense for shared interrupts and
2020 * it cannot be set along with IRQF_NO_SUSPEND.
2021 */
2022 if (((irqflags & IRQF_SHARED) && !dev_id) ||
2023 (!(irqflags & IRQF_SHARED) && (irqflags & IRQF_COND_SUSPEND)) ||
2024 ((irqflags & IRQF_NO_SUSPEND) && (irqflags & IRQF_COND_SUSPEND)))
2025 return -EINVAL;
2026
2027 desc = irq_to_desc(irq);
2028 if (!desc)
2029 return -EINVAL;
2030
2031 if (!irq_settings_can_request(desc) ||
2032 WARN_ON(irq_settings_is_per_cpu_devid(desc)))
2033 return -EINVAL;
2034
2035 if (!handler) {
2036 if (!thread_fn)
2037 return -EINVAL;
2038 handler = irq_default_primary_handler;
2039 }
2040
2041 action = kzalloc(sizeof(struct irqaction), GFP_KERNEL);
2042 if (!action)
2043 return -ENOMEM;
2044
2045 action->handler = handler;
2046 action->thread_fn = thread_fn;
2047 action->flags = irqflags;
2048 action->name = devname;
2049 action->dev_id = dev_id;
2050
2051 retval = irq_chip_pm_get(&desc->irq_data);
2052 if (retval < 0) {
2053 kfree(action);
2054 return retval;
2055 }
2056
2057 retval = __setup_irq(irq, desc, action);
2058
2059 if (retval) {
2060 irq_chip_pm_put(&desc->irq_data);
2061 kfree(action->secondary);
2062 kfree(action);
2063 }
2064
2065#ifdef CONFIG_DEBUG_SHIRQ_FIXME
2066 if (!retval && (irqflags & IRQF_SHARED)) {
2067 /*
2068 * It's a shared IRQ -- the driver ought to be prepared for it
2069 * to happen immediately, so let's make sure....
2070 * We disable the irq to make sure that a 'real' IRQ doesn't
2071 * run in parallel with our fake.
2072 */
2073 unsigned long flags;
2074
2075 disable_irq(irq);
2076 local_irq_save(flags);
2077
2078 handler(irq, dev_id);
2079
2080 local_irq_restore(flags);
2081 enable_irq(irq);
2082 }
2083#endif
2084 return retval;
2085}
2086EXPORT_SYMBOL(request_threaded_irq);
2087
2088/**
2089 * request_any_context_irq - allocate an interrupt line
2090 * @irq: Interrupt line to allocate
2091 * @handler: Function to be called when the IRQ occurs.
2092 * Threaded handler for threaded interrupts.
2093 * @flags: Interrupt type flags
2094 * @name: An ascii name for the claiming device
2095 * @dev_id: A cookie passed back to the handler function
2096 *
2097 * This call allocates interrupt resources and enables the
2098 * interrupt line and IRQ handling. It selects either a
2099 * hardirq or threaded handling method depending on the
2100 * context.
2101 *
2102 * On failure, it returns a negative value. On success,
2103 * it returns either IRQC_IS_HARDIRQ or IRQC_IS_NESTED.
2104 */
2105int request_any_context_irq(unsigned int irq, irq_handler_t handler,
2106 unsigned long flags, const char *name, void *dev_id)
2107{
2108 struct irq_desc *desc;
2109 int ret;
2110
2111 if (irq == IRQ_NOTCONNECTED)
2112 return -ENOTCONN;
2113
2114 desc = irq_to_desc(irq);
2115 if (!desc)
2116 return -EINVAL;
2117
2118 if (irq_settings_is_nested_thread(desc)) {
2119 ret = request_threaded_irq(irq, NULL, handler,
2120 flags, name, dev_id);
2121 return !ret ? IRQC_IS_NESTED : ret;
2122 }
2123
2124 ret = request_irq(irq, handler, flags, name, dev_id);
2125 return !ret ? IRQC_IS_HARDIRQ : ret;
2126}
2127EXPORT_SYMBOL_GPL(request_any_context_irq);
2128
2129/**
2130 * request_nmi - allocate an interrupt line for NMI delivery
2131 * @irq: Interrupt line to allocate
2132 * @handler: Function to be called when the IRQ occurs.
2133 * Threaded handler for threaded interrupts.
2134 * @irqflags: Interrupt type flags
2135 * @name: An ascii name for the claiming device
2136 * @dev_id: A cookie passed back to the handler function
2137 *
2138 * This call allocates interrupt resources and enables the
2139 * interrupt line and IRQ handling. It sets up the IRQ line
2140 * to be handled as an NMI.
2141 *
2142 * An interrupt line delivering NMIs cannot be shared and IRQ handling
2143 * cannot be threaded.
2144 *
2145 * Interrupt lines requested for NMI delivering must produce per cpu
2146 * interrupts and have auto enabling setting disabled.
2147 *
2148 * Dev_id must be globally unique. Normally the address of the
2149 * device data structure is used as the cookie. Since the handler
2150 * receives this value it makes sense to use it.
2151 *
2152 * If the interrupt line cannot be used to deliver NMIs, function
2153 * will fail and return a negative value.
2154 */
2155int request_nmi(unsigned int irq, irq_handler_t handler,
2156 unsigned long irqflags, const char *name, void *dev_id)
2157{
2158 struct irqaction *action;
2159 struct irq_desc *desc;
2160 unsigned long flags;
2161 int retval;
2162
2163 if (irq == IRQ_NOTCONNECTED)
2164 return -ENOTCONN;
2165
2166 /* NMI cannot be shared, used for Polling */
2167 if (irqflags & (IRQF_SHARED | IRQF_COND_SUSPEND | IRQF_IRQPOLL))
2168 return -EINVAL;
2169
2170 if (!(irqflags & IRQF_PERCPU))
2171 return -EINVAL;
2172
2173 if (!handler)
2174 return -EINVAL;
2175
2176 desc = irq_to_desc(irq);
2177
2178 if (!desc || irq_settings_can_autoenable(desc) ||
2179 !irq_settings_can_request(desc) ||
2180 WARN_ON(irq_settings_is_per_cpu_devid(desc)) ||
2181 !irq_supports_nmi(desc))
2182 return -EINVAL;
2183
2184 action = kzalloc(sizeof(struct irqaction), GFP_KERNEL);
2185 if (!action)
2186 return -ENOMEM;
2187
2188 action->handler = handler;
2189 action->flags = irqflags | IRQF_NO_THREAD | IRQF_NOBALANCING;
2190 action->name = name;
2191 action->dev_id = dev_id;
2192
2193 retval = irq_chip_pm_get(&desc->irq_data);
2194 if (retval < 0)
2195 goto err_out;
2196
2197 retval = __setup_irq(irq, desc, action);
2198 if (retval)
2199 goto err_irq_setup;
2200
2201 raw_spin_lock_irqsave(&desc->lock, flags);
2202
2203 /* Setup NMI state */
2204 desc->istate |= IRQS_NMI;
2205 retval = irq_nmi_setup(desc);
2206 if (retval) {
2207 __cleanup_nmi(irq, desc);
2208 raw_spin_unlock_irqrestore(&desc->lock, flags);
2209 return -EINVAL;
2210 }
2211
2212 raw_spin_unlock_irqrestore(&desc->lock, flags);
2213
2214 return 0;
2215
2216err_irq_setup:
2217 irq_chip_pm_put(&desc->irq_data);
2218err_out:
2219 kfree(action);
2220
2221 return retval;
2222}
2223
2224void enable_percpu_irq(unsigned int irq, unsigned int type)
2225{
2226 unsigned int cpu = smp_processor_id();
2227 unsigned long flags;
2228 struct irq_desc *desc = irq_get_desc_lock(irq, &flags, IRQ_GET_DESC_CHECK_PERCPU);
2229
2230 if (!desc)
2231 return;
2232
2233 /*
2234 * If the trigger type is not specified by the caller, then
2235 * use the default for this interrupt.
2236 */
2237 type &= IRQ_TYPE_SENSE_MASK;
2238 if (type == IRQ_TYPE_NONE)
2239 type = irqd_get_trigger_type(&desc->irq_data);
2240
2241 if (type != IRQ_TYPE_NONE) {
2242 int ret;
2243
2244 ret = __irq_set_trigger(desc, type);
2245
2246 if (ret) {
2247 WARN(1, "failed to set type for IRQ%d\n", irq);
2248 goto out;
2249 }
2250 }
2251
2252 irq_percpu_enable(desc, cpu);
2253out:
2254 irq_put_desc_unlock(desc, flags);
2255}
2256EXPORT_SYMBOL_GPL(enable_percpu_irq);
2257
2258void enable_percpu_nmi(unsigned int irq, unsigned int type)
2259{
2260 enable_percpu_irq(irq, type);
2261}
2262
2263/**
2264 * irq_percpu_is_enabled - Check whether the per cpu irq is enabled
2265 * @irq: Linux irq number to check for
2266 *
2267 * Must be called from a non migratable context. Returns the enable
2268 * state of a per cpu interrupt on the current cpu.
2269 */
2270bool irq_percpu_is_enabled(unsigned int irq)
2271{
2272 unsigned int cpu = smp_processor_id();
2273 struct irq_desc *desc;
2274 unsigned long flags;
2275 bool is_enabled;
2276
2277 desc = irq_get_desc_lock(irq, &flags, IRQ_GET_DESC_CHECK_PERCPU);
2278 if (!desc)
2279 return false;
2280
2281 is_enabled = cpumask_test_cpu(cpu, desc->percpu_enabled);
2282 irq_put_desc_unlock(desc, flags);
2283
2284 return is_enabled;
2285}
2286EXPORT_SYMBOL_GPL(irq_percpu_is_enabled);
2287
2288void disable_percpu_irq(unsigned int irq)
2289{
2290 unsigned int cpu = smp_processor_id();
2291 unsigned long flags;
2292 struct irq_desc *desc = irq_get_desc_lock(irq, &flags, IRQ_GET_DESC_CHECK_PERCPU);
2293
2294 if (!desc)
2295 return;
2296
2297 irq_percpu_disable(desc, cpu);
2298 irq_put_desc_unlock(desc, flags);
2299}
2300EXPORT_SYMBOL_GPL(disable_percpu_irq);
2301
2302void disable_percpu_nmi(unsigned int irq)
2303{
2304 disable_percpu_irq(irq);
2305}
2306
2307/*
2308 * Internal function to unregister a percpu irqaction.
2309 */
2310static struct irqaction *__free_percpu_irq(unsigned int irq, void __percpu *dev_id)
2311{
2312 struct irq_desc *desc = irq_to_desc(irq);
2313 struct irqaction *action;
2314 unsigned long flags;
2315
2316 WARN(in_interrupt(), "Trying to free IRQ %d from IRQ context!\n", irq);
2317
2318 if (!desc)
2319 return NULL;
2320
2321 raw_spin_lock_irqsave(&desc->lock, flags);
2322
2323 action = desc->action;
2324 if (!action || action->percpu_dev_id != dev_id) {
2325 WARN(1, "Trying to free already-free IRQ %d\n", irq);
2326 goto bad;
2327 }
2328
2329 if (!cpumask_empty(desc->percpu_enabled)) {
2330 WARN(1, "percpu IRQ %d still enabled on CPU%d!\n",
2331 irq, cpumask_first(desc->percpu_enabled));
2332 goto bad;
2333 }
2334
2335 /* Found it - now remove it from the list of entries: */
2336 desc->action = NULL;
2337
2338 desc->istate &= ~IRQS_NMI;
2339
2340 raw_spin_unlock_irqrestore(&desc->lock, flags);
2341
2342 unregister_handler_proc(irq, action);
2343
2344 irq_chip_pm_put(&desc->irq_data);
2345 module_put(desc->owner);
2346 return action;
2347
2348bad:
2349 raw_spin_unlock_irqrestore(&desc->lock, flags);
2350 return NULL;
2351}
2352
2353/**
2354 * remove_percpu_irq - free a per-cpu interrupt
2355 * @irq: Interrupt line to free
2356 * @act: irqaction for the interrupt
2357 *
2358 * Used to remove interrupts statically setup by the early boot process.
2359 */
2360void remove_percpu_irq(unsigned int irq, struct irqaction *act)
2361{
2362 struct irq_desc *desc = irq_to_desc(irq);
2363
2364 if (desc && irq_settings_is_per_cpu_devid(desc))
2365 __free_percpu_irq(irq, act->percpu_dev_id);
2366}
2367
2368/**
2369 * free_percpu_irq - free an interrupt allocated with request_percpu_irq
2370 * @irq: Interrupt line to free
2371 * @dev_id: Device identity to free
2372 *
2373 * Remove a percpu interrupt handler. The handler is removed, but
2374 * the interrupt line is not disabled. This must be done on each
2375 * CPU before calling this function. The function does not return
2376 * until any executing interrupts for this IRQ have completed.
2377 *
2378 * This function must not be called from interrupt context.
2379 */
2380void free_percpu_irq(unsigned int irq, void __percpu *dev_id)
2381{
2382 struct irq_desc *desc = irq_to_desc(irq);
2383
2384 if (!desc || !irq_settings_is_per_cpu_devid(desc))
2385 return;
2386
2387 chip_bus_lock(desc);
2388 kfree(__free_percpu_irq(irq, dev_id));
2389 chip_bus_sync_unlock(desc);
2390}
2391EXPORT_SYMBOL_GPL(free_percpu_irq);
2392
2393void free_percpu_nmi(unsigned int irq, void __percpu *dev_id)
2394{
2395 struct irq_desc *desc = irq_to_desc(irq);
2396
2397 if (!desc || !irq_settings_is_per_cpu_devid(desc))
2398 return;
2399
2400 if (WARN_ON(!(desc->istate & IRQS_NMI)))
2401 return;
2402
2403 kfree(__free_percpu_irq(irq, dev_id));
2404}
2405
2406/**
2407 * setup_percpu_irq - setup a per-cpu interrupt
2408 * @irq: Interrupt line to setup
2409 * @act: irqaction for the interrupt
2410 *
2411 * Used to statically setup per-cpu interrupts in the early boot process.
2412 */
2413int setup_percpu_irq(unsigned int irq, struct irqaction *act)
2414{
2415 struct irq_desc *desc = irq_to_desc(irq);
2416 int retval;
2417
2418 if (!desc || !irq_settings_is_per_cpu_devid(desc))
2419 return -EINVAL;
2420
2421 retval = irq_chip_pm_get(&desc->irq_data);
2422 if (retval < 0)
2423 return retval;
2424
2425 retval = __setup_irq(irq, desc, act);
2426
2427 if (retval)
2428 irq_chip_pm_put(&desc->irq_data);
2429
2430 return retval;
2431}
2432
2433/**
2434 * __request_percpu_irq - allocate a percpu interrupt line
2435 * @irq: Interrupt line to allocate
2436 * @handler: Function to be called when the IRQ occurs.
2437 * @flags: Interrupt type flags (IRQF_TIMER only)
2438 * @devname: An ascii name for the claiming device
2439 * @dev_id: A percpu cookie passed back to the handler function
2440 *
2441 * This call allocates interrupt resources and enables the
2442 * interrupt on the local CPU. If the interrupt is supposed to be
2443 * enabled on other CPUs, it has to be done on each CPU using
2444 * enable_percpu_irq().
2445 *
2446 * Dev_id must be globally unique. It is a per-cpu variable, and
2447 * the handler gets called with the interrupted CPU's instance of
2448 * that variable.
2449 */
2450int __request_percpu_irq(unsigned int irq, irq_handler_t handler,
2451 unsigned long flags, const char *devname,
2452 void __percpu *dev_id)
2453{
2454 struct irqaction *action;
2455 struct irq_desc *desc;
2456 int retval;
2457
2458 if (!dev_id)
2459 return -EINVAL;
2460
2461 desc = irq_to_desc(irq);
2462 if (!desc || !irq_settings_can_request(desc) ||
2463 !irq_settings_is_per_cpu_devid(desc))
2464 return -EINVAL;
2465
2466 if (flags && flags != IRQF_TIMER)
2467 return -EINVAL;
2468
2469 action = kzalloc(sizeof(struct irqaction), GFP_KERNEL);
2470 if (!action)
2471 return -ENOMEM;
2472
2473 action->handler = handler;
2474 action->flags = flags | IRQF_PERCPU | IRQF_NO_SUSPEND;
2475 action->name = devname;
2476 action->percpu_dev_id = dev_id;
2477
2478 retval = irq_chip_pm_get(&desc->irq_data);
2479 if (retval < 0) {
2480 kfree(action);
2481 return retval;
2482 }
2483
2484 retval = __setup_irq(irq, desc, action);
2485
2486 if (retval) {
2487 irq_chip_pm_put(&desc->irq_data);
2488 kfree(action);
2489 }
2490
2491 return retval;
2492}
2493EXPORT_SYMBOL_GPL(__request_percpu_irq);
2494
2495/**
2496 * request_percpu_nmi - allocate a percpu interrupt line for NMI delivery
2497 * @irq: Interrupt line to allocate
2498 * @handler: Function to be called when the IRQ occurs.
2499 * @name: An ascii name for the claiming device
2500 * @dev_id: A percpu cookie passed back to the handler function
2501 *
2502 * This call allocates interrupt resources for a per CPU NMI. Per CPU NMIs
2503 * have to be setup on each CPU by calling prepare_percpu_nmi() before
2504 * being enabled on the same CPU by using enable_percpu_nmi().
2505 *
2506 * Dev_id must be globally unique. It is a per-cpu variable, and
2507 * the handler gets called with the interrupted CPU's instance of
2508 * that variable.
2509 *
2510 * Interrupt lines requested for NMI delivering should have auto enabling
2511 * setting disabled.
2512 *
2513 * If the interrupt line cannot be used to deliver NMIs, function
2514 * will fail returning a negative value.
2515 */
2516int request_percpu_nmi(unsigned int irq, irq_handler_t handler,
2517 const char *name, void __percpu *dev_id)
2518{
2519 struct irqaction *action;
2520 struct irq_desc *desc;
2521 unsigned long flags;
2522 int retval;
2523
2524 if (!handler)
2525 return -EINVAL;
2526
2527 desc = irq_to_desc(irq);
2528
2529 if (!desc || !irq_settings_can_request(desc) ||
2530 !irq_settings_is_per_cpu_devid(desc) ||
2531 irq_settings_can_autoenable(desc) ||
2532 !irq_supports_nmi(desc))
2533 return -EINVAL;
2534
2535 /* The line cannot already be NMI */
2536 if (desc->istate & IRQS_NMI)
2537 return -EINVAL;
2538
2539 action = kzalloc(sizeof(struct irqaction), GFP_KERNEL);
2540 if (!action)
2541 return -ENOMEM;
2542
2543 action->handler = handler;
2544 action->flags = IRQF_PERCPU | IRQF_NO_SUSPEND | IRQF_NO_THREAD
2545 | IRQF_NOBALANCING;
2546 action->name = name;
2547 action->percpu_dev_id = dev_id;
2548
2549 retval = irq_chip_pm_get(&desc->irq_data);
2550 if (retval < 0)
2551 goto err_out;
2552
2553 retval = __setup_irq(irq, desc, action);
2554 if (retval)
2555 goto err_irq_setup;
2556
2557 raw_spin_lock_irqsave(&desc->lock, flags);
2558 desc->istate |= IRQS_NMI;
2559 raw_spin_unlock_irqrestore(&desc->lock, flags);
2560
2561 return 0;
2562
2563err_irq_setup:
2564 irq_chip_pm_put(&desc->irq_data);
2565err_out:
2566 kfree(action);
2567
2568 return retval;
2569}
2570
2571/**
2572 * prepare_percpu_nmi - performs CPU local setup for NMI delivery
2573 * @irq: Interrupt line to prepare for NMI delivery
2574 *
2575 * This call prepares an interrupt line to deliver NMI on the current CPU,
2576 * before that interrupt line gets enabled with enable_percpu_nmi().
2577 *
2578 * As a CPU local operation, this should be called from non-preemptible
2579 * context.
2580 *
2581 * If the interrupt line cannot be used to deliver NMIs, function
2582 * will fail returning a negative value.
2583 */
2584int prepare_percpu_nmi(unsigned int irq)
2585{
2586 unsigned long flags;
2587 struct irq_desc *desc;
2588 int ret = 0;
2589
2590 WARN_ON(preemptible());
2591
2592 desc = irq_get_desc_lock(irq, &flags,
2593 IRQ_GET_DESC_CHECK_PERCPU);
2594 if (!desc)
2595 return -EINVAL;
2596
2597 if (WARN(!(desc->istate & IRQS_NMI),
2598 KERN_ERR "prepare_percpu_nmi called for a non-NMI interrupt: irq %u\n",
2599 irq)) {
2600 ret = -EINVAL;
2601 goto out;
2602 }
2603
2604 ret = irq_nmi_setup(desc);
2605 if (ret) {
2606 pr_err("Failed to setup NMI delivery: irq %u\n", irq);
2607 goto out;
2608 }
2609
2610out:
2611 irq_put_desc_unlock(desc, flags);
2612 return ret;
2613}
2614
2615/**
2616 * teardown_percpu_nmi - undoes NMI setup of IRQ line
2617 * @irq: Interrupt line from which CPU local NMI configuration should be
2618 * removed
2619 *
2620 * This call undoes the setup done by prepare_percpu_nmi().
2621 *
2622 * IRQ line should not be enabled for the current CPU.
2623 *
2624 * As a CPU local operation, this should be called from non-preemptible
2625 * context.
2626 */
2627void teardown_percpu_nmi(unsigned int irq)
2628{
2629 unsigned long flags;
2630 struct irq_desc *desc;
2631
2632 WARN_ON(preemptible());
2633
2634 desc = irq_get_desc_lock(irq, &flags,
2635 IRQ_GET_DESC_CHECK_PERCPU);
2636 if (!desc)
2637 return;
2638
2639 if (WARN_ON(!(desc->istate & IRQS_NMI)))
2640 goto out;
2641
2642 irq_nmi_teardown(desc);
2643out:
2644 irq_put_desc_unlock(desc, flags);
2645}
2646
2647int __irq_get_irqchip_state(struct irq_data *data, enum irqchip_irq_state which,
2648 bool *state)
2649{
2650 struct irq_chip *chip;
2651 int err = -EINVAL;
2652
2653 do {
2654 chip = irq_data_get_irq_chip(data);
2655 if (WARN_ON_ONCE(!chip))
2656 return -ENODEV;
2657 if (chip->irq_get_irqchip_state)
2658 break;
2659#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
2660 data = data->parent_data;
2661#else
2662 data = NULL;
2663#endif
2664 } while (data);
2665
2666 if (data)
2667 err = chip->irq_get_irqchip_state(data, which, state);
2668 return err;
2669}
2670
2671/**
2672 * irq_get_irqchip_state - returns the irqchip state of a interrupt.
2673 * @irq: Interrupt line that is forwarded to a VM
2674 * @which: One of IRQCHIP_STATE_* the caller wants to know about
2675 * @state: a pointer to a boolean where the state is to be storeed
2676 *
2677 * This call snapshots the internal irqchip state of an
2678 * interrupt, returning into @state the bit corresponding to
2679 * stage @which
2680 *
2681 * This function should be called with preemption disabled if the
2682 * interrupt controller has per-cpu registers.
2683 */
2684int irq_get_irqchip_state(unsigned int irq, enum irqchip_irq_state which,
2685 bool *state)
2686{
2687 struct irq_desc *desc;
2688 struct irq_data *data;
2689 unsigned long flags;
2690 int err = -EINVAL;
2691
2692 desc = irq_get_desc_buslock(irq, &flags, 0);
2693 if (!desc)
2694 return err;
2695
2696 data = irq_desc_get_irq_data(desc);
2697
2698 err = __irq_get_irqchip_state(data, which, state);
2699
2700 irq_put_desc_busunlock(desc, flags);
2701 return err;
2702}
2703EXPORT_SYMBOL_GPL(irq_get_irqchip_state);
2704
2705/**
2706 * irq_set_irqchip_state - set the state of a forwarded interrupt.
2707 * @irq: Interrupt line that is forwarded to a VM
2708 * @which: State to be restored (one of IRQCHIP_STATE_*)
2709 * @val: Value corresponding to @which
2710 *
2711 * This call sets the internal irqchip state of an interrupt,
2712 * depending on the value of @which.
2713 *
2714 * This function should be called with preemption disabled if the
2715 * interrupt controller has per-cpu registers.
2716 */
2717int irq_set_irqchip_state(unsigned int irq, enum irqchip_irq_state which,
2718 bool val)
2719{
2720 struct irq_desc *desc;
2721 struct irq_data *data;
2722 struct irq_chip *chip;
2723 unsigned long flags;
2724 int err = -EINVAL;
2725
2726 desc = irq_get_desc_buslock(irq, &flags, 0);
2727 if (!desc)
2728 return err;
2729
2730 data = irq_desc_get_irq_data(desc);
2731
2732 do {
2733 chip = irq_data_get_irq_chip(data);
2734 if (WARN_ON_ONCE(!chip)) {
2735 err = -ENODEV;
2736 goto out_unlock;
2737 }
2738 if (chip->irq_set_irqchip_state)
2739 break;
2740#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
2741 data = data->parent_data;
2742#else
2743 data = NULL;
2744#endif
2745 } while (data);
2746
2747 if (data)
2748 err = chip->irq_set_irqchip_state(data, which, val);
2749
2750out_unlock:
2751 irq_put_desc_busunlock(desc, flags);
2752 return err;
2753}
2754EXPORT_SYMBOL_GPL(irq_set_irqchip_state);
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright (C) 1992, 1998-2006 Linus Torvalds, Ingo Molnar
4 * Copyright (C) 2005-2006 Thomas Gleixner
5 *
6 * This file contains driver APIs to the irq subsystem.
7 */
8
9#define pr_fmt(fmt) "genirq: " fmt
10
11#include <linux/irq.h>
12#include <linux/kthread.h>
13#include <linux/module.h>
14#include <linux/random.h>
15#include <linux/interrupt.h>
16#include <linux/irqdomain.h>
17#include <linux/slab.h>
18#include <linux/sched.h>
19#include <linux/sched/rt.h>
20#include <linux/sched/task.h>
21#include <linux/sched/isolation.h>
22#include <uapi/linux/sched/types.h>
23#include <linux/task_work.h>
24
25#include "internals.h"
26
27#if defined(CONFIG_IRQ_FORCED_THREADING) && !defined(CONFIG_PREEMPT_RT)
28__read_mostly bool force_irqthreads;
29EXPORT_SYMBOL_GPL(force_irqthreads);
30
31static int __init setup_forced_irqthreads(char *arg)
32{
33 force_irqthreads = true;
34 return 0;
35}
36early_param("threadirqs", setup_forced_irqthreads);
37#endif
38
39static void __synchronize_hardirq(struct irq_desc *desc, bool sync_chip)
40{
41 struct irq_data *irqd = irq_desc_get_irq_data(desc);
42 bool inprogress;
43
44 do {
45 unsigned long flags;
46
47 /*
48 * Wait until we're out of the critical section. This might
49 * give the wrong answer due to the lack of memory barriers.
50 */
51 while (irqd_irq_inprogress(&desc->irq_data))
52 cpu_relax();
53
54 /* Ok, that indicated we're done: double-check carefully. */
55 raw_spin_lock_irqsave(&desc->lock, flags);
56 inprogress = irqd_irq_inprogress(&desc->irq_data);
57
58 /*
59 * If requested and supported, check at the chip whether it
60 * is in flight at the hardware level, i.e. already pending
61 * in a CPU and waiting for service and acknowledge.
62 */
63 if (!inprogress && sync_chip) {
64 /*
65 * Ignore the return code. inprogress is only updated
66 * when the chip supports it.
67 */
68 __irq_get_irqchip_state(irqd, IRQCHIP_STATE_ACTIVE,
69 &inprogress);
70 }
71 raw_spin_unlock_irqrestore(&desc->lock, flags);
72
73 /* Oops, that failed? */
74 } while (inprogress);
75}
76
77/**
78 * synchronize_hardirq - wait for pending hard IRQ handlers (on other CPUs)
79 * @irq: interrupt number to wait for
80 *
81 * This function waits for any pending hard IRQ handlers for this
82 * interrupt to complete before returning. If you use this
83 * function while holding a resource the IRQ handler may need you
84 * will deadlock. It does not take associated threaded handlers
85 * into account.
86 *
87 * Do not use this for shutdown scenarios where you must be sure
88 * that all parts (hardirq and threaded handler) have completed.
89 *
90 * Returns: false if a threaded handler is active.
91 *
92 * This function may be called - with care - from IRQ context.
93 *
94 * It does not check whether there is an interrupt in flight at the
95 * hardware level, but not serviced yet, as this might deadlock when
96 * called with interrupts disabled and the target CPU of the interrupt
97 * is the current CPU.
98 */
99bool synchronize_hardirq(unsigned int irq)
100{
101 struct irq_desc *desc = irq_to_desc(irq);
102
103 if (desc) {
104 __synchronize_hardirq(desc, false);
105 return !atomic_read(&desc->threads_active);
106 }
107
108 return true;
109}
110EXPORT_SYMBOL(synchronize_hardirq);
111
112/**
113 * synchronize_irq - wait for pending IRQ handlers (on other CPUs)
114 * @irq: interrupt number to wait for
115 *
116 * This function waits for any pending IRQ handlers for this interrupt
117 * to complete before returning. If you use this function while
118 * holding a resource the IRQ handler may need you will deadlock.
119 *
120 * Can only be called from preemptible code as it might sleep when
121 * an interrupt thread is associated to @irq.
122 *
123 * It optionally makes sure (when the irq chip supports that method)
124 * that the interrupt is not pending in any CPU and waiting for
125 * service.
126 */
127void synchronize_irq(unsigned int irq)
128{
129 struct irq_desc *desc = irq_to_desc(irq);
130
131 if (desc) {
132 __synchronize_hardirq(desc, true);
133 /*
134 * We made sure that no hardirq handler is
135 * running. Now verify that no threaded handlers are
136 * active.
137 */
138 wait_event(desc->wait_for_threads,
139 !atomic_read(&desc->threads_active));
140 }
141}
142EXPORT_SYMBOL(synchronize_irq);
143
144#ifdef CONFIG_SMP
145cpumask_var_t irq_default_affinity;
146
147static bool __irq_can_set_affinity(struct irq_desc *desc)
148{
149 if (!desc || !irqd_can_balance(&desc->irq_data) ||
150 !desc->irq_data.chip || !desc->irq_data.chip->irq_set_affinity)
151 return false;
152 return true;
153}
154
155/**
156 * irq_can_set_affinity - Check if the affinity of a given irq can be set
157 * @irq: Interrupt to check
158 *
159 */
160int irq_can_set_affinity(unsigned int irq)
161{
162 return __irq_can_set_affinity(irq_to_desc(irq));
163}
164
165/**
166 * irq_can_set_affinity_usr - Check if affinity of a irq can be set from user space
167 * @irq: Interrupt to check
168 *
169 * Like irq_can_set_affinity() above, but additionally checks for the
170 * AFFINITY_MANAGED flag.
171 */
172bool irq_can_set_affinity_usr(unsigned int irq)
173{
174 struct irq_desc *desc = irq_to_desc(irq);
175
176 return __irq_can_set_affinity(desc) &&
177 !irqd_affinity_is_managed(&desc->irq_data);
178}
179
180/**
181 * irq_set_thread_affinity - Notify irq threads to adjust affinity
182 * @desc: irq descriptor which has affinity changed
183 *
184 * We just set IRQTF_AFFINITY and delegate the affinity setting
185 * to the interrupt thread itself. We can not call
186 * set_cpus_allowed_ptr() here as we hold desc->lock and this
187 * code can be called from hard interrupt context.
188 */
189void irq_set_thread_affinity(struct irq_desc *desc)
190{
191 struct irqaction *action;
192
193 for_each_action_of_desc(desc, action)
194 if (action->thread)
195 set_bit(IRQTF_AFFINITY, &action->thread_flags);
196}
197
198#ifdef CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK
199static void irq_validate_effective_affinity(struct irq_data *data)
200{
201 const struct cpumask *m = irq_data_get_effective_affinity_mask(data);
202 struct irq_chip *chip = irq_data_get_irq_chip(data);
203
204 if (!cpumask_empty(m))
205 return;
206 pr_warn_once("irq_chip %s did not update eff. affinity mask of irq %u\n",
207 chip->name, data->irq);
208}
209
210static inline void irq_init_effective_affinity(struct irq_data *data,
211 const struct cpumask *mask)
212{
213 cpumask_copy(irq_data_get_effective_affinity_mask(data), mask);
214}
215#else
216static inline void irq_validate_effective_affinity(struct irq_data *data) { }
217static inline void irq_init_effective_affinity(struct irq_data *data,
218 const struct cpumask *mask) { }
219#endif
220
221int irq_do_set_affinity(struct irq_data *data, const struct cpumask *mask,
222 bool force)
223{
224 struct irq_desc *desc = irq_data_to_desc(data);
225 struct irq_chip *chip = irq_data_get_irq_chip(data);
226 int ret;
227
228 if (!chip || !chip->irq_set_affinity)
229 return -EINVAL;
230
231 /*
232 * If this is a managed interrupt and housekeeping is enabled on
233 * it check whether the requested affinity mask intersects with
234 * a housekeeping CPU. If so, then remove the isolated CPUs from
235 * the mask and just keep the housekeeping CPU(s). This prevents
236 * the affinity setter from routing the interrupt to an isolated
237 * CPU to avoid that I/O submitted from a housekeeping CPU causes
238 * interrupts on an isolated one.
239 *
240 * If the masks do not intersect or include online CPU(s) then
241 * keep the requested mask. The isolated target CPUs are only
242 * receiving interrupts when the I/O operation was submitted
243 * directly from them.
244 *
245 * If all housekeeping CPUs in the affinity mask are offline, the
246 * interrupt will be migrated by the CPU hotplug code once a
247 * housekeeping CPU which belongs to the affinity mask comes
248 * online.
249 */
250 if (irqd_affinity_is_managed(data) &&
251 housekeeping_enabled(HK_FLAG_MANAGED_IRQ)) {
252 const struct cpumask *hk_mask, *prog_mask;
253
254 static DEFINE_RAW_SPINLOCK(tmp_mask_lock);
255 static struct cpumask tmp_mask;
256
257 hk_mask = housekeeping_cpumask(HK_FLAG_MANAGED_IRQ);
258
259 raw_spin_lock(&tmp_mask_lock);
260 cpumask_and(&tmp_mask, mask, hk_mask);
261 if (!cpumask_intersects(&tmp_mask, cpu_online_mask))
262 prog_mask = mask;
263 else
264 prog_mask = &tmp_mask;
265 ret = chip->irq_set_affinity(data, prog_mask, force);
266 raw_spin_unlock(&tmp_mask_lock);
267 } else {
268 ret = chip->irq_set_affinity(data, mask, force);
269 }
270 switch (ret) {
271 case IRQ_SET_MASK_OK:
272 case IRQ_SET_MASK_OK_DONE:
273 cpumask_copy(desc->irq_common_data.affinity, mask);
274 fallthrough;
275 case IRQ_SET_MASK_OK_NOCOPY:
276 irq_validate_effective_affinity(data);
277 irq_set_thread_affinity(desc);
278 ret = 0;
279 }
280
281 return ret;
282}
283
284#ifdef CONFIG_GENERIC_PENDING_IRQ
285static inline int irq_set_affinity_pending(struct irq_data *data,
286 const struct cpumask *dest)
287{
288 struct irq_desc *desc = irq_data_to_desc(data);
289
290 irqd_set_move_pending(data);
291 irq_copy_pending(desc, dest);
292 return 0;
293}
294#else
295static inline int irq_set_affinity_pending(struct irq_data *data,
296 const struct cpumask *dest)
297{
298 return -EBUSY;
299}
300#endif
301
302static int irq_try_set_affinity(struct irq_data *data,
303 const struct cpumask *dest, bool force)
304{
305 int ret = irq_do_set_affinity(data, dest, force);
306
307 /*
308 * In case that the underlying vector management is busy and the
309 * architecture supports the generic pending mechanism then utilize
310 * this to avoid returning an error to user space.
311 */
312 if (ret == -EBUSY && !force)
313 ret = irq_set_affinity_pending(data, dest);
314 return ret;
315}
316
317static bool irq_set_affinity_deactivated(struct irq_data *data,
318 const struct cpumask *mask, bool force)
319{
320 struct irq_desc *desc = irq_data_to_desc(data);
321
322 /*
323 * Handle irq chips which can handle affinity only in activated
324 * state correctly
325 *
326 * If the interrupt is not yet activated, just store the affinity
327 * mask and do not call the chip driver at all. On activation the
328 * driver has to make sure anyway that the interrupt is in a
329 * usable state so startup works.
330 */
331 if (!IS_ENABLED(CONFIG_IRQ_DOMAIN_HIERARCHY) ||
332 irqd_is_activated(data) || !irqd_affinity_on_activate(data))
333 return false;
334
335 cpumask_copy(desc->irq_common_data.affinity, mask);
336 irq_init_effective_affinity(data, mask);
337 irqd_set(data, IRQD_AFFINITY_SET);
338 return true;
339}
340
341int irq_set_affinity_locked(struct irq_data *data, const struct cpumask *mask,
342 bool force)
343{
344 struct irq_chip *chip = irq_data_get_irq_chip(data);
345 struct irq_desc *desc = irq_data_to_desc(data);
346 int ret = 0;
347
348 if (!chip || !chip->irq_set_affinity)
349 return -EINVAL;
350
351 if (irq_set_affinity_deactivated(data, mask, force))
352 return 0;
353
354 if (irq_can_move_pcntxt(data) && !irqd_is_setaffinity_pending(data)) {
355 ret = irq_try_set_affinity(data, mask, force);
356 } else {
357 irqd_set_move_pending(data);
358 irq_copy_pending(desc, mask);
359 }
360
361 if (desc->affinity_notify) {
362 kref_get(&desc->affinity_notify->kref);
363 if (!schedule_work(&desc->affinity_notify->work)) {
364 /* Work was already scheduled, drop our extra ref */
365 kref_put(&desc->affinity_notify->kref,
366 desc->affinity_notify->release);
367 }
368 }
369 irqd_set(data, IRQD_AFFINITY_SET);
370
371 return ret;
372}
373
374/**
375 * irq_update_affinity_desc - Update affinity management for an interrupt
376 * @irq: The interrupt number to update
377 * @affinity: Pointer to the affinity descriptor
378 *
379 * This interface can be used to configure the affinity management of
380 * interrupts which have been allocated already.
381 *
382 * There are certain limitations on when it may be used - attempts to use it
383 * for when the kernel is configured for generic IRQ reservation mode (in
384 * config GENERIC_IRQ_RESERVATION_MODE) will fail, as it may conflict with
385 * managed/non-managed interrupt accounting. In addition, attempts to use it on
386 * an interrupt which is already started or which has already been configured
387 * as managed will also fail, as these mean invalid init state or double init.
388 */
389int irq_update_affinity_desc(unsigned int irq,
390 struct irq_affinity_desc *affinity)
391{
392 struct irq_desc *desc;
393 unsigned long flags;
394 bool activated;
395 int ret = 0;
396
397 /*
398 * Supporting this with the reservation scheme used by x86 needs
399 * some more thought. Fail it for now.
400 */
401 if (IS_ENABLED(CONFIG_GENERIC_IRQ_RESERVATION_MODE))
402 return -EOPNOTSUPP;
403
404 desc = irq_get_desc_buslock(irq, &flags, 0);
405 if (!desc)
406 return -EINVAL;
407
408 /* Requires the interrupt to be shut down */
409 if (irqd_is_started(&desc->irq_data)) {
410 ret = -EBUSY;
411 goto out_unlock;
412 }
413
414 /* Interrupts which are already managed cannot be modified */
415 if (irqd_affinity_is_managed(&desc->irq_data)) {
416 ret = -EBUSY;
417 goto out_unlock;
418 }
419
420 /*
421 * Deactivate the interrupt. That's required to undo
422 * anything an earlier activation has established.
423 */
424 activated = irqd_is_activated(&desc->irq_data);
425 if (activated)
426 irq_domain_deactivate_irq(&desc->irq_data);
427
428 if (affinity->is_managed) {
429 irqd_set(&desc->irq_data, IRQD_AFFINITY_MANAGED);
430 irqd_set(&desc->irq_data, IRQD_MANAGED_SHUTDOWN);
431 }
432
433 cpumask_copy(desc->irq_common_data.affinity, &affinity->mask);
434
435 /* Restore the activation state */
436 if (activated)
437 irq_domain_activate_irq(&desc->irq_data, false);
438
439out_unlock:
440 irq_put_desc_busunlock(desc, flags);
441 return ret;
442}
443
444static int __irq_set_affinity(unsigned int irq, const struct cpumask *mask,
445 bool force)
446{
447 struct irq_desc *desc = irq_to_desc(irq);
448 unsigned long flags;
449 int ret;
450
451 if (!desc)
452 return -EINVAL;
453
454 raw_spin_lock_irqsave(&desc->lock, flags);
455 ret = irq_set_affinity_locked(irq_desc_get_irq_data(desc), mask, force);
456 raw_spin_unlock_irqrestore(&desc->lock, flags);
457 return ret;
458}
459
460/**
461 * irq_set_affinity - Set the irq affinity of a given irq
462 * @irq: Interrupt to set affinity
463 * @cpumask: cpumask
464 *
465 * Fails if cpumask does not contain an online CPU
466 */
467int irq_set_affinity(unsigned int irq, const struct cpumask *cpumask)
468{
469 return __irq_set_affinity(irq, cpumask, false);
470}
471EXPORT_SYMBOL_GPL(irq_set_affinity);
472
473/**
474 * irq_force_affinity - Force the irq affinity of a given irq
475 * @irq: Interrupt to set affinity
476 * @cpumask: cpumask
477 *
478 * Same as irq_set_affinity, but without checking the mask against
479 * online cpus.
480 *
481 * Solely for low level cpu hotplug code, where we need to make per
482 * cpu interrupts affine before the cpu becomes online.
483 */
484int irq_force_affinity(unsigned int irq, const struct cpumask *cpumask)
485{
486 return __irq_set_affinity(irq, cpumask, true);
487}
488EXPORT_SYMBOL_GPL(irq_force_affinity);
489
490int irq_set_affinity_hint(unsigned int irq, const struct cpumask *m)
491{
492 unsigned long flags;
493 struct irq_desc *desc = irq_get_desc_lock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
494
495 if (!desc)
496 return -EINVAL;
497 desc->affinity_hint = m;
498 irq_put_desc_unlock(desc, flags);
499 /* set the initial affinity to prevent every interrupt being on CPU0 */
500 if (m)
501 __irq_set_affinity(irq, m, false);
502 return 0;
503}
504EXPORT_SYMBOL_GPL(irq_set_affinity_hint);
505
506static void irq_affinity_notify(struct work_struct *work)
507{
508 struct irq_affinity_notify *notify =
509 container_of(work, struct irq_affinity_notify, work);
510 struct irq_desc *desc = irq_to_desc(notify->irq);
511 cpumask_var_t cpumask;
512 unsigned long flags;
513
514 if (!desc || !alloc_cpumask_var(&cpumask, GFP_KERNEL))
515 goto out;
516
517 raw_spin_lock_irqsave(&desc->lock, flags);
518 if (irq_move_pending(&desc->irq_data))
519 irq_get_pending(cpumask, desc);
520 else
521 cpumask_copy(cpumask, desc->irq_common_data.affinity);
522 raw_spin_unlock_irqrestore(&desc->lock, flags);
523
524 notify->notify(notify, cpumask);
525
526 free_cpumask_var(cpumask);
527out:
528 kref_put(¬ify->kref, notify->release);
529}
530
531/**
532 * irq_set_affinity_notifier - control notification of IRQ affinity changes
533 * @irq: Interrupt for which to enable/disable notification
534 * @notify: Context for notification, or %NULL to disable
535 * notification. Function pointers must be initialised;
536 * the other fields will be initialised by this function.
537 *
538 * Must be called in process context. Notification may only be enabled
539 * after the IRQ is allocated and must be disabled before the IRQ is
540 * freed using free_irq().
541 */
542int
543irq_set_affinity_notifier(unsigned int irq, struct irq_affinity_notify *notify)
544{
545 struct irq_desc *desc = irq_to_desc(irq);
546 struct irq_affinity_notify *old_notify;
547 unsigned long flags;
548
549 /* The release function is promised process context */
550 might_sleep();
551
552 if (!desc || desc->istate & IRQS_NMI)
553 return -EINVAL;
554
555 /* Complete initialisation of *notify */
556 if (notify) {
557 notify->irq = irq;
558 kref_init(¬ify->kref);
559 INIT_WORK(¬ify->work, irq_affinity_notify);
560 }
561
562 raw_spin_lock_irqsave(&desc->lock, flags);
563 old_notify = desc->affinity_notify;
564 desc->affinity_notify = notify;
565 raw_spin_unlock_irqrestore(&desc->lock, flags);
566
567 if (old_notify) {
568 if (cancel_work_sync(&old_notify->work)) {
569 /* Pending work had a ref, put that one too */
570 kref_put(&old_notify->kref, old_notify->release);
571 }
572 kref_put(&old_notify->kref, old_notify->release);
573 }
574
575 return 0;
576}
577EXPORT_SYMBOL_GPL(irq_set_affinity_notifier);
578
579#ifndef CONFIG_AUTO_IRQ_AFFINITY
580/*
581 * Generic version of the affinity autoselector.
582 */
583int irq_setup_affinity(struct irq_desc *desc)
584{
585 struct cpumask *set = irq_default_affinity;
586 int ret, node = irq_desc_get_node(desc);
587 static DEFINE_RAW_SPINLOCK(mask_lock);
588 static struct cpumask mask;
589
590 /* Excludes PER_CPU and NO_BALANCE interrupts */
591 if (!__irq_can_set_affinity(desc))
592 return 0;
593
594 raw_spin_lock(&mask_lock);
595 /*
596 * Preserve the managed affinity setting and a userspace affinity
597 * setup, but make sure that one of the targets is online.
598 */
599 if (irqd_affinity_is_managed(&desc->irq_data) ||
600 irqd_has_set(&desc->irq_data, IRQD_AFFINITY_SET)) {
601 if (cpumask_intersects(desc->irq_common_data.affinity,
602 cpu_online_mask))
603 set = desc->irq_common_data.affinity;
604 else
605 irqd_clear(&desc->irq_data, IRQD_AFFINITY_SET);
606 }
607
608 cpumask_and(&mask, cpu_online_mask, set);
609 if (cpumask_empty(&mask))
610 cpumask_copy(&mask, cpu_online_mask);
611
612 if (node != NUMA_NO_NODE) {
613 const struct cpumask *nodemask = cpumask_of_node(node);
614
615 /* make sure at least one of the cpus in nodemask is online */
616 if (cpumask_intersects(&mask, nodemask))
617 cpumask_and(&mask, &mask, nodemask);
618 }
619 ret = irq_do_set_affinity(&desc->irq_data, &mask, false);
620 raw_spin_unlock(&mask_lock);
621 return ret;
622}
623#else
624/* Wrapper for ALPHA specific affinity selector magic */
625int irq_setup_affinity(struct irq_desc *desc)
626{
627 return irq_select_affinity(irq_desc_get_irq(desc));
628}
629#endif /* CONFIG_AUTO_IRQ_AFFINITY */
630#endif /* CONFIG_SMP */
631
632
633/**
634 * irq_set_vcpu_affinity - Set vcpu affinity for the interrupt
635 * @irq: interrupt number to set affinity
636 * @vcpu_info: vCPU specific data or pointer to a percpu array of vCPU
637 * specific data for percpu_devid interrupts
638 *
639 * This function uses the vCPU specific data to set the vCPU
640 * affinity for an irq. The vCPU specific data is passed from
641 * outside, such as KVM. One example code path is as below:
642 * KVM -> IOMMU -> irq_set_vcpu_affinity().
643 */
644int irq_set_vcpu_affinity(unsigned int irq, void *vcpu_info)
645{
646 unsigned long flags;
647 struct irq_desc *desc = irq_get_desc_lock(irq, &flags, 0);
648 struct irq_data *data;
649 struct irq_chip *chip;
650 int ret = -ENOSYS;
651
652 if (!desc)
653 return -EINVAL;
654
655 data = irq_desc_get_irq_data(desc);
656 do {
657 chip = irq_data_get_irq_chip(data);
658 if (chip && chip->irq_set_vcpu_affinity)
659 break;
660#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
661 data = data->parent_data;
662#else
663 data = NULL;
664#endif
665 } while (data);
666
667 if (data)
668 ret = chip->irq_set_vcpu_affinity(data, vcpu_info);
669 irq_put_desc_unlock(desc, flags);
670
671 return ret;
672}
673EXPORT_SYMBOL_GPL(irq_set_vcpu_affinity);
674
675void __disable_irq(struct irq_desc *desc)
676{
677 if (!desc->depth++)
678 irq_disable(desc);
679}
680
681static int __disable_irq_nosync(unsigned int irq)
682{
683 unsigned long flags;
684 struct irq_desc *desc = irq_get_desc_buslock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
685
686 if (!desc)
687 return -EINVAL;
688 __disable_irq(desc);
689 irq_put_desc_busunlock(desc, flags);
690 return 0;
691}
692
693/**
694 * disable_irq_nosync - disable an irq without waiting
695 * @irq: Interrupt to disable
696 *
697 * Disable the selected interrupt line. Disables and Enables are
698 * nested.
699 * Unlike disable_irq(), this function does not ensure existing
700 * instances of the IRQ handler have completed before returning.
701 *
702 * This function may be called from IRQ context.
703 */
704void disable_irq_nosync(unsigned int irq)
705{
706 __disable_irq_nosync(irq);
707}
708EXPORT_SYMBOL(disable_irq_nosync);
709
710/**
711 * disable_irq - disable an irq and wait for completion
712 * @irq: Interrupt to disable
713 *
714 * Disable the selected interrupt line. Enables and Disables are
715 * nested.
716 * This function waits for any pending IRQ handlers for this interrupt
717 * to complete before returning. If you use this function while
718 * holding a resource the IRQ handler may need you will deadlock.
719 *
720 * This function may be called - with care - from IRQ context.
721 */
722void disable_irq(unsigned int irq)
723{
724 if (!__disable_irq_nosync(irq))
725 synchronize_irq(irq);
726}
727EXPORT_SYMBOL(disable_irq);
728
729/**
730 * disable_hardirq - disables an irq and waits for hardirq completion
731 * @irq: Interrupt to disable
732 *
733 * Disable the selected interrupt line. Enables and Disables are
734 * nested.
735 * This function waits for any pending hard IRQ handlers for this
736 * interrupt to complete before returning. If you use this function while
737 * holding a resource the hard IRQ handler may need you will deadlock.
738 *
739 * When used to optimistically disable an interrupt from atomic context
740 * the return value must be checked.
741 *
742 * Returns: false if a threaded handler is active.
743 *
744 * This function may be called - with care - from IRQ context.
745 */
746bool disable_hardirq(unsigned int irq)
747{
748 if (!__disable_irq_nosync(irq))
749 return synchronize_hardirq(irq);
750
751 return false;
752}
753EXPORT_SYMBOL_GPL(disable_hardirq);
754
755/**
756 * disable_nmi_nosync - disable an nmi without waiting
757 * @irq: Interrupt to disable
758 *
759 * Disable the selected interrupt line. Disables and enables are
760 * nested.
761 * The interrupt to disable must have been requested through request_nmi.
762 * Unlike disable_nmi(), this function does not ensure existing
763 * instances of the IRQ handler have completed before returning.
764 */
765void disable_nmi_nosync(unsigned int irq)
766{
767 disable_irq_nosync(irq);
768}
769
770void __enable_irq(struct irq_desc *desc)
771{
772 switch (desc->depth) {
773 case 0:
774 err_out:
775 WARN(1, KERN_WARNING "Unbalanced enable for IRQ %d\n",
776 irq_desc_get_irq(desc));
777 break;
778 case 1: {
779 if (desc->istate & IRQS_SUSPENDED)
780 goto err_out;
781 /* Prevent probing on this irq: */
782 irq_settings_set_noprobe(desc);
783 /*
784 * Call irq_startup() not irq_enable() here because the
785 * interrupt might be marked NOAUTOEN. So irq_startup()
786 * needs to be invoked when it gets enabled the first
787 * time. If it was already started up, then irq_startup()
788 * will invoke irq_enable() under the hood.
789 */
790 irq_startup(desc, IRQ_RESEND, IRQ_START_FORCE);
791 break;
792 }
793 default:
794 desc->depth--;
795 }
796}
797
798/**
799 * enable_irq - enable handling of an irq
800 * @irq: Interrupt to enable
801 *
802 * Undoes the effect of one call to disable_irq(). If this
803 * matches the last disable, processing of interrupts on this
804 * IRQ line is re-enabled.
805 *
806 * This function may be called from IRQ context only when
807 * desc->irq_data.chip->bus_lock and desc->chip->bus_sync_unlock are NULL !
808 */
809void enable_irq(unsigned int irq)
810{
811 unsigned long flags;
812 struct irq_desc *desc = irq_get_desc_buslock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
813
814 if (!desc)
815 return;
816 if (WARN(!desc->irq_data.chip,
817 KERN_ERR "enable_irq before setup/request_irq: irq %u\n", irq))
818 goto out;
819
820 __enable_irq(desc);
821out:
822 irq_put_desc_busunlock(desc, flags);
823}
824EXPORT_SYMBOL(enable_irq);
825
826/**
827 * enable_nmi - enable handling of an nmi
828 * @irq: Interrupt to enable
829 *
830 * The interrupt to enable must have been requested through request_nmi.
831 * Undoes the effect of one call to disable_nmi(). If this
832 * matches the last disable, processing of interrupts on this
833 * IRQ line is re-enabled.
834 */
835void enable_nmi(unsigned int irq)
836{
837 enable_irq(irq);
838}
839
840static int set_irq_wake_real(unsigned int irq, unsigned int on)
841{
842 struct irq_desc *desc = irq_to_desc(irq);
843 int ret = -ENXIO;
844
845 if (irq_desc_get_chip(desc)->flags & IRQCHIP_SKIP_SET_WAKE)
846 return 0;
847
848 if (desc->irq_data.chip->irq_set_wake)
849 ret = desc->irq_data.chip->irq_set_wake(&desc->irq_data, on);
850
851 return ret;
852}
853
854/**
855 * irq_set_irq_wake - control irq power management wakeup
856 * @irq: interrupt to control
857 * @on: enable/disable power management wakeup
858 *
859 * Enable/disable power management wakeup mode, which is
860 * disabled by default. Enables and disables must match,
861 * just as they match for non-wakeup mode support.
862 *
863 * Wakeup mode lets this IRQ wake the system from sleep
864 * states like "suspend to RAM".
865 *
866 * Note: irq enable/disable state is completely orthogonal
867 * to the enable/disable state of irq wake. An irq can be
868 * disabled with disable_irq() and still wake the system as
869 * long as the irq has wake enabled. If this does not hold,
870 * then the underlying irq chip and the related driver need
871 * to be investigated.
872 */
873int irq_set_irq_wake(unsigned int irq, unsigned int on)
874{
875 unsigned long flags;
876 struct irq_desc *desc = irq_get_desc_buslock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
877 int ret = 0;
878
879 if (!desc)
880 return -EINVAL;
881
882 /* Don't use NMIs as wake up interrupts please */
883 if (desc->istate & IRQS_NMI) {
884 ret = -EINVAL;
885 goto out_unlock;
886 }
887
888 /* wakeup-capable irqs can be shared between drivers that
889 * don't need to have the same sleep mode behaviors.
890 */
891 if (on) {
892 if (desc->wake_depth++ == 0) {
893 ret = set_irq_wake_real(irq, on);
894 if (ret)
895 desc->wake_depth = 0;
896 else
897 irqd_set(&desc->irq_data, IRQD_WAKEUP_STATE);
898 }
899 } else {
900 if (desc->wake_depth == 0) {
901 WARN(1, "Unbalanced IRQ %d wake disable\n", irq);
902 } else if (--desc->wake_depth == 0) {
903 ret = set_irq_wake_real(irq, on);
904 if (ret)
905 desc->wake_depth = 1;
906 else
907 irqd_clear(&desc->irq_data, IRQD_WAKEUP_STATE);
908 }
909 }
910
911out_unlock:
912 irq_put_desc_busunlock(desc, flags);
913 return ret;
914}
915EXPORT_SYMBOL(irq_set_irq_wake);
916
917/*
918 * Internal function that tells the architecture code whether a
919 * particular irq has been exclusively allocated or is available
920 * for driver use.
921 */
922int can_request_irq(unsigned int irq, unsigned long irqflags)
923{
924 unsigned long flags;
925 struct irq_desc *desc = irq_get_desc_lock(irq, &flags, 0);
926 int canrequest = 0;
927
928 if (!desc)
929 return 0;
930
931 if (irq_settings_can_request(desc)) {
932 if (!desc->action ||
933 irqflags & desc->action->flags & IRQF_SHARED)
934 canrequest = 1;
935 }
936 irq_put_desc_unlock(desc, flags);
937 return canrequest;
938}
939
940int __irq_set_trigger(struct irq_desc *desc, unsigned long flags)
941{
942 struct irq_chip *chip = desc->irq_data.chip;
943 int ret, unmask = 0;
944
945 if (!chip || !chip->irq_set_type) {
946 /*
947 * IRQF_TRIGGER_* but the PIC does not support multiple
948 * flow-types?
949 */
950 pr_debug("No set_type function for IRQ %d (%s)\n",
951 irq_desc_get_irq(desc),
952 chip ? (chip->name ? : "unknown") : "unknown");
953 return 0;
954 }
955
956 if (chip->flags & IRQCHIP_SET_TYPE_MASKED) {
957 if (!irqd_irq_masked(&desc->irq_data))
958 mask_irq(desc);
959 if (!irqd_irq_disabled(&desc->irq_data))
960 unmask = 1;
961 }
962
963 /* Mask all flags except trigger mode */
964 flags &= IRQ_TYPE_SENSE_MASK;
965 ret = chip->irq_set_type(&desc->irq_data, flags);
966
967 switch (ret) {
968 case IRQ_SET_MASK_OK:
969 case IRQ_SET_MASK_OK_DONE:
970 irqd_clear(&desc->irq_data, IRQD_TRIGGER_MASK);
971 irqd_set(&desc->irq_data, flags);
972 fallthrough;
973
974 case IRQ_SET_MASK_OK_NOCOPY:
975 flags = irqd_get_trigger_type(&desc->irq_data);
976 irq_settings_set_trigger_mask(desc, flags);
977 irqd_clear(&desc->irq_data, IRQD_LEVEL);
978 irq_settings_clr_level(desc);
979 if (flags & IRQ_TYPE_LEVEL_MASK) {
980 irq_settings_set_level(desc);
981 irqd_set(&desc->irq_data, IRQD_LEVEL);
982 }
983
984 ret = 0;
985 break;
986 default:
987 pr_err("Setting trigger mode %lu for irq %u failed (%pS)\n",
988 flags, irq_desc_get_irq(desc), chip->irq_set_type);
989 }
990 if (unmask)
991 unmask_irq(desc);
992 return ret;
993}
994
995#ifdef CONFIG_HARDIRQS_SW_RESEND
996int irq_set_parent(int irq, int parent_irq)
997{
998 unsigned long flags;
999 struct irq_desc *desc = irq_get_desc_lock(irq, &flags, 0);
1000
1001 if (!desc)
1002 return -EINVAL;
1003
1004 desc->parent_irq = parent_irq;
1005
1006 irq_put_desc_unlock(desc, flags);
1007 return 0;
1008}
1009EXPORT_SYMBOL_GPL(irq_set_parent);
1010#endif
1011
1012/*
1013 * Default primary interrupt handler for threaded interrupts. Is
1014 * assigned as primary handler when request_threaded_irq is called
1015 * with handler == NULL. Useful for oneshot interrupts.
1016 */
1017static irqreturn_t irq_default_primary_handler(int irq, void *dev_id)
1018{
1019 return IRQ_WAKE_THREAD;
1020}
1021
1022/*
1023 * Primary handler for nested threaded interrupts. Should never be
1024 * called.
1025 */
1026static irqreturn_t irq_nested_primary_handler(int irq, void *dev_id)
1027{
1028 WARN(1, "Primary handler called for nested irq %d\n", irq);
1029 return IRQ_NONE;
1030}
1031
1032static irqreturn_t irq_forced_secondary_handler(int irq, void *dev_id)
1033{
1034 WARN(1, "Secondary action handler called for irq %d\n", irq);
1035 return IRQ_NONE;
1036}
1037
1038static int irq_wait_for_interrupt(struct irqaction *action)
1039{
1040 for (;;) {
1041 set_current_state(TASK_INTERRUPTIBLE);
1042
1043 if (kthread_should_stop()) {
1044 /* may need to run one last time */
1045 if (test_and_clear_bit(IRQTF_RUNTHREAD,
1046 &action->thread_flags)) {
1047 __set_current_state(TASK_RUNNING);
1048 return 0;
1049 }
1050 __set_current_state(TASK_RUNNING);
1051 return -1;
1052 }
1053
1054 if (test_and_clear_bit(IRQTF_RUNTHREAD,
1055 &action->thread_flags)) {
1056 __set_current_state(TASK_RUNNING);
1057 return 0;
1058 }
1059 schedule();
1060 }
1061}
1062
1063/*
1064 * Oneshot interrupts keep the irq line masked until the threaded
1065 * handler finished. unmask if the interrupt has not been disabled and
1066 * is marked MASKED.
1067 */
1068static void irq_finalize_oneshot(struct irq_desc *desc,
1069 struct irqaction *action)
1070{
1071 if (!(desc->istate & IRQS_ONESHOT) ||
1072 action->handler == irq_forced_secondary_handler)
1073 return;
1074again:
1075 chip_bus_lock(desc);
1076 raw_spin_lock_irq(&desc->lock);
1077
1078 /*
1079 * Implausible though it may be we need to protect us against
1080 * the following scenario:
1081 *
1082 * The thread is faster done than the hard interrupt handler
1083 * on the other CPU. If we unmask the irq line then the
1084 * interrupt can come in again and masks the line, leaves due
1085 * to IRQS_INPROGRESS and the irq line is masked forever.
1086 *
1087 * This also serializes the state of shared oneshot handlers
1088 * versus "desc->threads_oneshot |= action->thread_mask;" in
1089 * irq_wake_thread(). See the comment there which explains the
1090 * serialization.
1091 */
1092 if (unlikely(irqd_irq_inprogress(&desc->irq_data))) {
1093 raw_spin_unlock_irq(&desc->lock);
1094 chip_bus_sync_unlock(desc);
1095 cpu_relax();
1096 goto again;
1097 }
1098
1099 /*
1100 * Now check again, whether the thread should run. Otherwise
1101 * we would clear the threads_oneshot bit of this thread which
1102 * was just set.
1103 */
1104 if (test_bit(IRQTF_RUNTHREAD, &action->thread_flags))
1105 goto out_unlock;
1106
1107 desc->threads_oneshot &= ~action->thread_mask;
1108
1109 if (!desc->threads_oneshot && !irqd_irq_disabled(&desc->irq_data) &&
1110 irqd_irq_masked(&desc->irq_data))
1111 unmask_threaded_irq(desc);
1112
1113out_unlock:
1114 raw_spin_unlock_irq(&desc->lock);
1115 chip_bus_sync_unlock(desc);
1116}
1117
1118#ifdef CONFIG_SMP
1119/*
1120 * Check whether we need to change the affinity of the interrupt thread.
1121 */
1122static void
1123irq_thread_check_affinity(struct irq_desc *desc, struct irqaction *action)
1124{
1125 cpumask_var_t mask;
1126 bool valid = true;
1127
1128 if (!test_and_clear_bit(IRQTF_AFFINITY, &action->thread_flags))
1129 return;
1130
1131 /*
1132 * In case we are out of memory we set IRQTF_AFFINITY again and
1133 * try again next time
1134 */
1135 if (!alloc_cpumask_var(&mask, GFP_KERNEL)) {
1136 set_bit(IRQTF_AFFINITY, &action->thread_flags);
1137 return;
1138 }
1139
1140 raw_spin_lock_irq(&desc->lock);
1141 /*
1142 * This code is triggered unconditionally. Check the affinity
1143 * mask pointer. For CPU_MASK_OFFSTACK=n this is optimized out.
1144 */
1145 if (cpumask_available(desc->irq_common_data.affinity)) {
1146 const struct cpumask *m;
1147
1148 m = irq_data_get_effective_affinity_mask(&desc->irq_data);
1149 cpumask_copy(mask, m);
1150 } else {
1151 valid = false;
1152 }
1153 raw_spin_unlock_irq(&desc->lock);
1154
1155 if (valid)
1156 set_cpus_allowed_ptr(current, mask);
1157 free_cpumask_var(mask);
1158}
1159#else
1160static inline void
1161irq_thread_check_affinity(struct irq_desc *desc, struct irqaction *action) { }
1162#endif
1163
1164/*
1165 * Interrupts which are not explicitly requested as threaded
1166 * interrupts rely on the implicit bh/preempt disable of the hard irq
1167 * context. So we need to disable bh here to avoid deadlocks and other
1168 * side effects.
1169 */
1170static irqreturn_t
1171irq_forced_thread_fn(struct irq_desc *desc, struct irqaction *action)
1172{
1173 irqreturn_t ret;
1174
1175 local_bh_disable();
1176 if (!IS_ENABLED(CONFIG_PREEMPT_RT))
1177 local_irq_disable();
1178 ret = action->thread_fn(action->irq, action->dev_id);
1179 if (ret == IRQ_HANDLED)
1180 atomic_inc(&desc->threads_handled);
1181
1182 irq_finalize_oneshot(desc, action);
1183 if (!IS_ENABLED(CONFIG_PREEMPT_RT))
1184 local_irq_enable();
1185 local_bh_enable();
1186 return ret;
1187}
1188
1189/*
1190 * Interrupts explicitly requested as threaded interrupts want to be
1191 * preemptible - many of them need to sleep and wait for slow busses to
1192 * complete.
1193 */
1194static irqreturn_t irq_thread_fn(struct irq_desc *desc,
1195 struct irqaction *action)
1196{
1197 irqreturn_t ret;
1198
1199 ret = action->thread_fn(action->irq, action->dev_id);
1200 if (ret == IRQ_HANDLED)
1201 atomic_inc(&desc->threads_handled);
1202
1203 irq_finalize_oneshot(desc, action);
1204 return ret;
1205}
1206
1207static void wake_threads_waitq(struct irq_desc *desc)
1208{
1209 if (atomic_dec_and_test(&desc->threads_active))
1210 wake_up(&desc->wait_for_threads);
1211}
1212
1213static void irq_thread_dtor(struct callback_head *unused)
1214{
1215 struct task_struct *tsk = current;
1216 struct irq_desc *desc;
1217 struct irqaction *action;
1218
1219 if (WARN_ON_ONCE(!(current->flags & PF_EXITING)))
1220 return;
1221
1222 action = kthread_data(tsk);
1223
1224 pr_err("exiting task \"%s\" (%d) is an active IRQ thread (irq %d)\n",
1225 tsk->comm, tsk->pid, action->irq);
1226
1227
1228 desc = irq_to_desc(action->irq);
1229 /*
1230 * If IRQTF_RUNTHREAD is set, we need to decrement
1231 * desc->threads_active and wake possible waiters.
1232 */
1233 if (test_and_clear_bit(IRQTF_RUNTHREAD, &action->thread_flags))
1234 wake_threads_waitq(desc);
1235
1236 /* Prevent a stale desc->threads_oneshot */
1237 irq_finalize_oneshot(desc, action);
1238}
1239
1240static void irq_wake_secondary(struct irq_desc *desc, struct irqaction *action)
1241{
1242 struct irqaction *secondary = action->secondary;
1243
1244 if (WARN_ON_ONCE(!secondary))
1245 return;
1246
1247 raw_spin_lock_irq(&desc->lock);
1248 __irq_wake_thread(desc, secondary);
1249 raw_spin_unlock_irq(&desc->lock);
1250}
1251
1252/*
1253 * Interrupt handler thread
1254 */
1255static int irq_thread(void *data)
1256{
1257 struct callback_head on_exit_work;
1258 struct irqaction *action = data;
1259 struct irq_desc *desc = irq_to_desc(action->irq);
1260 irqreturn_t (*handler_fn)(struct irq_desc *desc,
1261 struct irqaction *action);
1262
1263 if (force_irqthreads && test_bit(IRQTF_FORCED_THREAD,
1264 &action->thread_flags))
1265 handler_fn = irq_forced_thread_fn;
1266 else
1267 handler_fn = irq_thread_fn;
1268
1269 init_task_work(&on_exit_work, irq_thread_dtor);
1270 task_work_add(current, &on_exit_work, TWA_NONE);
1271
1272 irq_thread_check_affinity(desc, action);
1273
1274 while (!irq_wait_for_interrupt(action)) {
1275 irqreturn_t action_ret;
1276
1277 irq_thread_check_affinity(desc, action);
1278
1279 action_ret = handler_fn(desc, action);
1280 if (action_ret == IRQ_WAKE_THREAD)
1281 irq_wake_secondary(desc, action);
1282
1283 wake_threads_waitq(desc);
1284 }
1285
1286 /*
1287 * This is the regular exit path. __free_irq() is stopping the
1288 * thread via kthread_stop() after calling
1289 * synchronize_hardirq(). So neither IRQTF_RUNTHREAD nor the
1290 * oneshot mask bit can be set.
1291 */
1292 task_work_cancel(current, irq_thread_dtor);
1293 return 0;
1294}
1295
1296/**
1297 * irq_wake_thread - wake the irq thread for the action identified by dev_id
1298 * @irq: Interrupt line
1299 * @dev_id: Device identity for which the thread should be woken
1300 *
1301 */
1302void irq_wake_thread(unsigned int irq, void *dev_id)
1303{
1304 struct irq_desc *desc = irq_to_desc(irq);
1305 struct irqaction *action;
1306 unsigned long flags;
1307
1308 if (!desc || WARN_ON(irq_settings_is_per_cpu_devid(desc)))
1309 return;
1310
1311 raw_spin_lock_irqsave(&desc->lock, flags);
1312 for_each_action_of_desc(desc, action) {
1313 if (action->dev_id == dev_id) {
1314 if (action->thread)
1315 __irq_wake_thread(desc, action);
1316 break;
1317 }
1318 }
1319 raw_spin_unlock_irqrestore(&desc->lock, flags);
1320}
1321EXPORT_SYMBOL_GPL(irq_wake_thread);
1322
1323static int irq_setup_forced_threading(struct irqaction *new)
1324{
1325 if (!force_irqthreads)
1326 return 0;
1327 if (new->flags & (IRQF_NO_THREAD | IRQF_PERCPU | IRQF_ONESHOT))
1328 return 0;
1329
1330 /*
1331 * No further action required for interrupts which are requested as
1332 * threaded interrupts already
1333 */
1334 if (new->handler == irq_default_primary_handler)
1335 return 0;
1336
1337 new->flags |= IRQF_ONESHOT;
1338
1339 /*
1340 * Handle the case where we have a real primary handler and a
1341 * thread handler. We force thread them as well by creating a
1342 * secondary action.
1343 */
1344 if (new->handler && new->thread_fn) {
1345 /* Allocate the secondary action */
1346 new->secondary = kzalloc(sizeof(struct irqaction), GFP_KERNEL);
1347 if (!new->secondary)
1348 return -ENOMEM;
1349 new->secondary->handler = irq_forced_secondary_handler;
1350 new->secondary->thread_fn = new->thread_fn;
1351 new->secondary->dev_id = new->dev_id;
1352 new->secondary->irq = new->irq;
1353 new->secondary->name = new->name;
1354 }
1355 /* Deal with the primary handler */
1356 set_bit(IRQTF_FORCED_THREAD, &new->thread_flags);
1357 new->thread_fn = new->handler;
1358 new->handler = irq_default_primary_handler;
1359 return 0;
1360}
1361
1362static int irq_request_resources(struct irq_desc *desc)
1363{
1364 struct irq_data *d = &desc->irq_data;
1365 struct irq_chip *c = d->chip;
1366
1367 return c->irq_request_resources ? c->irq_request_resources(d) : 0;
1368}
1369
1370static void irq_release_resources(struct irq_desc *desc)
1371{
1372 struct irq_data *d = &desc->irq_data;
1373 struct irq_chip *c = d->chip;
1374
1375 if (c->irq_release_resources)
1376 c->irq_release_resources(d);
1377}
1378
1379static bool irq_supports_nmi(struct irq_desc *desc)
1380{
1381 struct irq_data *d = irq_desc_get_irq_data(desc);
1382
1383#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
1384 /* Only IRQs directly managed by the root irqchip can be set as NMI */
1385 if (d->parent_data)
1386 return false;
1387#endif
1388 /* Don't support NMIs for chips behind a slow bus */
1389 if (d->chip->irq_bus_lock || d->chip->irq_bus_sync_unlock)
1390 return false;
1391
1392 return d->chip->flags & IRQCHIP_SUPPORTS_NMI;
1393}
1394
1395static int irq_nmi_setup(struct irq_desc *desc)
1396{
1397 struct irq_data *d = irq_desc_get_irq_data(desc);
1398 struct irq_chip *c = d->chip;
1399
1400 return c->irq_nmi_setup ? c->irq_nmi_setup(d) : -EINVAL;
1401}
1402
1403static void irq_nmi_teardown(struct irq_desc *desc)
1404{
1405 struct irq_data *d = irq_desc_get_irq_data(desc);
1406 struct irq_chip *c = d->chip;
1407
1408 if (c->irq_nmi_teardown)
1409 c->irq_nmi_teardown(d);
1410}
1411
1412static int
1413setup_irq_thread(struct irqaction *new, unsigned int irq, bool secondary)
1414{
1415 struct task_struct *t;
1416
1417 if (!secondary) {
1418 t = kthread_create(irq_thread, new, "irq/%d-%s", irq,
1419 new->name);
1420 } else {
1421 t = kthread_create(irq_thread, new, "irq/%d-s-%s", irq,
1422 new->name);
1423 }
1424
1425 if (IS_ERR(t))
1426 return PTR_ERR(t);
1427
1428 sched_set_fifo(t);
1429
1430 /*
1431 * We keep the reference to the task struct even if
1432 * the thread dies to avoid that the interrupt code
1433 * references an already freed task_struct.
1434 */
1435 new->thread = get_task_struct(t);
1436 /*
1437 * Tell the thread to set its affinity. This is
1438 * important for shared interrupt handlers as we do
1439 * not invoke setup_affinity() for the secondary
1440 * handlers as everything is already set up. Even for
1441 * interrupts marked with IRQF_NO_BALANCE this is
1442 * correct as we want the thread to move to the cpu(s)
1443 * on which the requesting code placed the interrupt.
1444 */
1445 set_bit(IRQTF_AFFINITY, &new->thread_flags);
1446 return 0;
1447}
1448
1449/*
1450 * Internal function to register an irqaction - typically used to
1451 * allocate special interrupts that are part of the architecture.
1452 *
1453 * Locking rules:
1454 *
1455 * desc->request_mutex Provides serialization against a concurrent free_irq()
1456 * chip_bus_lock Provides serialization for slow bus operations
1457 * desc->lock Provides serialization against hard interrupts
1458 *
1459 * chip_bus_lock and desc->lock are sufficient for all other management and
1460 * interrupt related functions. desc->request_mutex solely serializes
1461 * request/free_irq().
1462 */
1463static int
1464__setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new)
1465{
1466 struct irqaction *old, **old_ptr;
1467 unsigned long flags, thread_mask = 0;
1468 int ret, nested, shared = 0;
1469
1470 if (!desc)
1471 return -EINVAL;
1472
1473 if (desc->irq_data.chip == &no_irq_chip)
1474 return -ENOSYS;
1475 if (!try_module_get(desc->owner))
1476 return -ENODEV;
1477
1478 new->irq = irq;
1479
1480 /*
1481 * If the trigger type is not specified by the caller,
1482 * then use the default for this interrupt.
1483 */
1484 if (!(new->flags & IRQF_TRIGGER_MASK))
1485 new->flags |= irqd_get_trigger_type(&desc->irq_data);
1486
1487 /*
1488 * Check whether the interrupt nests into another interrupt
1489 * thread.
1490 */
1491 nested = irq_settings_is_nested_thread(desc);
1492 if (nested) {
1493 if (!new->thread_fn) {
1494 ret = -EINVAL;
1495 goto out_mput;
1496 }
1497 /*
1498 * Replace the primary handler which was provided from
1499 * the driver for non nested interrupt handling by the
1500 * dummy function which warns when called.
1501 */
1502 new->handler = irq_nested_primary_handler;
1503 } else {
1504 if (irq_settings_can_thread(desc)) {
1505 ret = irq_setup_forced_threading(new);
1506 if (ret)
1507 goto out_mput;
1508 }
1509 }
1510
1511 /*
1512 * Create a handler thread when a thread function is supplied
1513 * and the interrupt does not nest into another interrupt
1514 * thread.
1515 */
1516 if (new->thread_fn && !nested) {
1517 ret = setup_irq_thread(new, irq, false);
1518 if (ret)
1519 goto out_mput;
1520 if (new->secondary) {
1521 ret = setup_irq_thread(new->secondary, irq, true);
1522 if (ret)
1523 goto out_thread;
1524 }
1525 }
1526
1527 /*
1528 * Drivers are often written to work w/o knowledge about the
1529 * underlying irq chip implementation, so a request for a
1530 * threaded irq without a primary hard irq context handler
1531 * requires the ONESHOT flag to be set. Some irq chips like
1532 * MSI based interrupts are per se one shot safe. Check the
1533 * chip flags, so we can avoid the unmask dance at the end of
1534 * the threaded handler for those.
1535 */
1536 if (desc->irq_data.chip->flags & IRQCHIP_ONESHOT_SAFE)
1537 new->flags &= ~IRQF_ONESHOT;
1538
1539 /*
1540 * Protects against a concurrent __free_irq() call which might wait
1541 * for synchronize_hardirq() to complete without holding the optional
1542 * chip bus lock and desc->lock. Also protects against handing out
1543 * a recycled oneshot thread_mask bit while it's still in use by
1544 * its previous owner.
1545 */
1546 mutex_lock(&desc->request_mutex);
1547
1548 /*
1549 * Acquire bus lock as the irq_request_resources() callback below
1550 * might rely on the serialization or the magic power management
1551 * functions which are abusing the irq_bus_lock() callback,
1552 */
1553 chip_bus_lock(desc);
1554
1555 /* First installed action requests resources. */
1556 if (!desc->action) {
1557 ret = irq_request_resources(desc);
1558 if (ret) {
1559 pr_err("Failed to request resources for %s (irq %d) on irqchip %s\n",
1560 new->name, irq, desc->irq_data.chip->name);
1561 goto out_bus_unlock;
1562 }
1563 }
1564
1565 /*
1566 * The following block of code has to be executed atomically
1567 * protected against a concurrent interrupt and any of the other
1568 * management calls which are not serialized via
1569 * desc->request_mutex or the optional bus lock.
1570 */
1571 raw_spin_lock_irqsave(&desc->lock, flags);
1572 old_ptr = &desc->action;
1573 old = *old_ptr;
1574 if (old) {
1575 /*
1576 * Can't share interrupts unless both agree to and are
1577 * the same type (level, edge, polarity). So both flag
1578 * fields must have IRQF_SHARED set and the bits which
1579 * set the trigger type must match. Also all must
1580 * agree on ONESHOT.
1581 * Interrupt lines used for NMIs cannot be shared.
1582 */
1583 unsigned int oldtype;
1584
1585 if (desc->istate & IRQS_NMI) {
1586 pr_err("Invalid attempt to share NMI for %s (irq %d) on irqchip %s.\n",
1587 new->name, irq, desc->irq_data.chip->name);
1588 ret = -EINVAL;
1589 goto out_unlock;
1590 }
1591
1592 /*
1593 * If nobody did set the configuration before, inherit
1594 * the one provided by the requester.
1595 */
1596 if (irqd_trigger_type_was_set(&desc->irq_data)) {
1597 oldtype = irqd_get_trigger_type(&desc->irq_data);
1598 } else {
1599 oldtype = new->flags & IRQF_TRIGGER_MASK;
1600 irqd_set_trigger_type(&desc->irq_data, oldtype);
1601 }
1602
1603 if (!((old->flags & new->flags) & IRQF_SHARED) ||
1604 (oldtype != (new->flags & IRQF_TRIGGER_MASK)) ||
1605 ((old->flags ^ new->flags) & IRQF_ONESHOT))
1606 goto mismatch;
1607
1608 /* All handlers must agree on per-cpuness */
1609 if ((old->flags & IRQF_PERCPU) !=
1610 (new->flags & IRQF_PERCPU))
1611 goto mismatch;
1612
1613 /* add new interrupt at end of irq queue */
1614 do {
1615 /*
1616 * Or all existing action->thread_mask bits,
1617 * so we can find the next zero bit for this
1618 * new action.
1619 */
1620 thread_mask |= old->thread_mask;
1621 old_ptr = &old->next;
1622 old = *old_ptr;
1623 } while (old);
1624 shared = 1;
1625 }
1626
1627 /*
1628 * Setup the thread mask for this irqaction for ONESHOT. For
1629 * !ONESHOT irqs the thread mask is 0 so we can avoid a
1630 * conditional in irq_wake_thread().
1631 */
1632 if (new->flags & IRQF_ONESHOT) {
1633 /*
1634 * Unlikely to have 32 resp 64 irqs sharing one line,
1635 * but who knows.
1636 */
1637 if (thread_mask == ~0UL) {
1638 ret = -EBUSY;
1639 goto out_unlock;
1640 }
1641 /*
1642 * The thread_mask for the action is or'ed to
1643 * desc->thread_active to indicate that the
1644 * IRQF_ONESHOT thread handler has been woken, but not
1645 * yet finished. The bit is cleared when a thread
1646 * completes. When all threads of a shared interrupt
1647 * line have completed desc->threads_active becomes
1648 * zero and the interrupt line is unmasked. See
1649 * handle.c:irq_wake_thread() for further information.
1650 *
1651 * If no thread is woken by primary (hard irq context)
1652 * interrupt handlers, then desc->threads_active is
1653 * also checked for zero to unmask the irq line in the
1654 * affected hard irq flow handlers
1655 * (handle_[fasteoi|level]_irq).
1656 *
1657 * The new action gets the first zero bit of
1658 * thread_mask assigned. See the loop above which or's
1659 * all existing action->thread_mask bits.
1660 */
1661 new->thread_mask = 1UL << ffz(thread_mask);
1662
1663 } else if (new->handler == irq_default_primary_handler &&
1664 !(desc->irq_data.chip->flags & IRQCHIP_ONESHOT_SAFE)) {
1665 /*
1666 * The interrupt was requested with handler = NULL, so
1667 * we use the default primary handler for it. But it
1668 * does not have the oneshot flag set. In combination
1669 * with level interrupts this is deadly, because the
1670 * default primary handler just wakes the thread, then
1671 * the irq lines is reenabled, but the device still
1672 * has the level irq asserted. Rinse and repeat....
1673 *
1674 * While this works for edge type interrupts, we play
1675 * it safe and reject unconditionally because we can't
1676 * say for sure which type this interrupt really
1677 * has. The type flags are unreliable as the
1678 * underlying chip implementation can override them.
1679 */
1680 pr_err("Threaded irq requested with handler=NULL and !ONESHOT for %s (irq %d)\n",
1681 new->name, irq);
1682 ret = -EINVAL;
1683 goto out_unlock;
1684 }
1685
1686 if (!shared) {
1687 init_waitqueue_head(&desc->wait_for_threads);
1688
1689 /* Setup the type (level, edge polarity) if configured: */
1690 if (new->flags & IRQF_TRIGGER_MASK) {
1691 ret = __irq_set_trigger(desc,
1692 new->flags & IRQF_TRIGGER_MASK);
1693
1694 if (ret)
1695 goto out_unlock;
1696 }
1697
1698 /*
1699 * Activate the interrupt. That activation must happen
1700 * independently of IRQ_NOAUTOEN. request_irq() can fail
1701 * and the callers are supposed to handle
1702 * that. enable_irq() of an interrupt requested with
1703 * IRQ_NOAUTOEN is not supposed to fail. The activation
1704 * keeps it in shutdown mode, it merily associates
1705 * resources if necessary and if that's not possible it
1706 * fails. Interrupts which are in managed shutdown mode
1707 * will simply ignore that activation request.
1708 */
1709 ret = irq_activate(desc);
1710 if (ret)
1711 goto out_unlock;
1712
1713 desc->istate &= ~(IRQS_AUTODETECT | IRQS_SPURIOUS_DISABLED | \
1714 IRQS_ONESHOT | IRQS_WAITING);
1715 irqd_clear(&desc->irq_data, IRQD_IRQ_INPROGRESS);
1716
1717 if (new->flags & IRQF_PERCPU) {
1718 irqd_set(&desc->irq_data, IRQD_PER_CPU);
1719 irq_settings_set_per_cpu(desc);
1720 if (new->flags & IRQF_NO_DEBUG)
1721 irq_settings_set_no_debug(desc);
1722 }
1723
1724 if (noirqdebug)
1725 irq_settings_set_no_debug(desc);
1726
1727 if (new->flags & IRQF_ONESHOT)
1728 desc->istate |= IRQS_ONESHOT;
1729
1730 /* Exclude IRQ from balancing if requested */
1731 if (new->flags & IRQF_NOBALANCING) {
1732 irq_settings_set_no_balancing(desc);
1733 irqd_set(&desc->irq_data, IRQD_NO_BALANCING);
1734 }
1735
1736 if (!(new->flags & IRQF_NO_AUTOEN) &&
1737 irq_settings_can_autoenable(desc)) {
1738 irq_startup(desc, IRQ_RESEND, IRQ_START_COND);
1739 } else {
1740 /*
1741 * Shared interrupts do not go well with disabling
1742 * auto enable. The sharing interrupt might request
1743 * it while it's still disabled and then wait for
1744 * interrupts forever.
1745 */
1746 WARN_ON_ONCE(new->flags & IRQF_SHARED);
1747 /* Undo nested disables: */
1748 desc->depth = 1;
1749 }
1750
1751 } else if (new->flags & IRQF_TRIGGER_MASK) {
1752 unsigned int nmsk = new->flags & IRQF_TRIGGER_MASK;
1753 unsigned int omsk = irqd_get_trigger_type(&desc->irq_data);
1754
1755 if (nmsk != omsk)
1756 /* hope the handler works with current trigger mode */
1757 pr_warn("irq %d uses trigger mode %u; requested %u\n",
1758 irq, omsk, nmsk);
1759 }
1760
1761 *old_ptr = new;
1762
1763 irq_pm_install_action(desc, new);
1764
1765 /* Reset broken irq detection when installing new handler */
1766 desc->irq_count = 0;
1767 desc->irqs_unhandled = 0;
1768
1769 /*
1770 * Check whether we disabled the irq via the spurious handler
1771 * before. Reenable it and give it another chance.
1772 */
1773 if (shared && (desc->istate & IRQS_SPURIOUS_DISABLED)) {
1774 desc->istate &= ~IRQS_SPURIOUS_DISABLED;
1775 __enable_irq(desc);
1776 }
1777
1778 raw_spin_unlock_irqrestore(&desc->lock, flags);
1779 chip_bus_sync_unlock(desc);
1780 mutex_unlock(&desc->request_mutex);
1781
1782 irq_setup_timings(desc, new);
1783
1784 /*
1785 * Strictly no need to wake it up, but hung_task complains
1786 * when no hard interrupt wakes the thread up.
1787 */
1788 if (new->thread)
1789 wake_up_process(new->thread);
1790 if (new->secondary)
1791 wake_up_process(new->secondary->thread);
1792
1793 register_irq_proc(irq, desc);
1794 new->dir = NULL;
1795 register_handler_proc(irq, new);
1796 return 0;
1797
1798mismatch:
1799 if (!(new->flags & IRQF_PROBE_SHARED)) {
1800 pr_err("Flags mismatch irq %d. %08x (%s) vs. %08x (%s)\n",
1801 irq, new->flags, new->name, old->flags, old->name);
1802#ifdef CONFIG_DEBUG_SHIRQ
1803 dump_stack();
1804#endif
1805 }
1806 ret = -EBUSY;
1807
1808out_unlock:
1809 raw_spin_unlock_irqrestore(&desc->lock, flags);
1810
1811 if (!desc->action)
1812 irq_release_resources(desc);
1813out_bus_unlock:
1814 chip_bus_sync_unlock(desc);
1815 mutex_unlock(&desc->request_mutex);
1816
1817out_thread:
1818 if (new->thread) {
1819 struct task_struct *t = new->thread;
1820
1821 new->thread = NULL;
1822 kthread_stop(t);
1823 put_task_struct(t);
1824 }
1825 if (new->secondary && new->secondary->thread) {
1826 struct task_struct *t = new->secondary->thread;
1827
1828 new->secondary->thread = NULL;
1829 kthread_stop(t);
1830 put_task_struct(t);
1831 }
1832out_mput:
1833 module_put(desc->owner);
1834 return ret;
1835}
1836
1837/*
1838 * Internal function to unregister an irqaction - used to free
1839 * regular and special interrupts that are part of the architecture.
1840 */
1841static struct irqaction *__free_irq(struct irq_desc *desc, void *dev_id)
1842{
1843 unsigned irq = desc->irq_data.irq;
1844 struct irqaction *action, **action_ptr;
1845 unsigned long flags;
1846
1847 WARN(in_interrupt(), "Trying to free IRQ %d from IRQ context!\n", irq);
1848
1849 mutex_lock(&desc->request_mutex);
1850 chip_bus_lock(desc);
1851 raw_spin_lock_irqsave(&desc->lock, flags);
1852
1853 /*
1854 * There can be multiple actions per IRQ descriptor, find the right
1855 * one based on the dev_id:
1856 */
1857 action_ptr = &desc->action;
1858 for (;;) {
1859 action = *action_ptr;
1860
1861 if (!action) {
1862 WARN(1, "Trying to free already-free IRQ %d\n", irq);
1863 raw_spin_unlock_irqrestore(&desc->lock, flags);
1864 chip_bus_sync_unlock(desc);
1865 mutex_unlock(&desc->request_mutex);
1866 return NULL;
1867 }
1868
1869 if (action->dev_id == dev_id)
1870 break;
1871 action_ptr = &action->next;
1872 }
1873
1874 /* Found it - now remove it from the list of entries: */
1875 *action_ptr = action->next;
1876
1877 irq_pm_remove_action(desc, action);
1878
1879 /* If this was the last handler, shut down the IRQ line: */
1880 if (!desc->action) {
1881 irq_settings_clr_disable_unlazy(desc);
1882 /* Only shutdown. Deactivate after synchronize_hardirq() */
1883 irq_shutdown(desc);
1884 }
1885
1886#ifdef CONFIG_SMP
1887 /* make sure affinity_hint is cleaned up */
1888 if (WARN_ON_ONCE(desc->affinity_hint))
1889 desc->affinity_hint = NULL;
1890#endif
1891
1892 raw_spin_unlock_irqrestore(&desc->lock, flags);
1893 /*
1894 * Drop bus_lock here so the changes which were done in the chip
1895 * callbacks above are synced out to the irq chips which hang
1896 * behind a slow bus (I2C, SPI) before calling synchronize_hardirq().
1897 *
1898 * Aside of that the bus_lock can also be taken from the threaded
1899 * handler in irq_finalize_oneshot() which results in a deadlock
1900 * because kthread_stop() would wait forever for the thread to
1901 * complete, which is blocked on the bus lock.
1902 *
1903 * The still held desc->request_mutex() protects against a
1904 * concurrent request_irq() of this irq so the release of resources
1905 * and timing data is properly serialized.
1906 */
1907 chip_bus_sync_unlock(desc);
1908
1909 unregister_handler_proc(irq, action);
1910
1911 /*
1912 * Make sure it's not being used on another CPU and if the chip
1913 * supports it also make sure that there is no (not yet serviced)
1914 * interrupt in flight at the hardware level.
1915 */
1916 __synchronize_hardirq(desc, true);
1917
1918#ifdef CONFIG_DEBUG_SHIRQ
1919 /*
1920 * It's a shared IRQ -- the driver ought to be prepared for an IRQ
1921 * event to happen even now it's being freed, so let's make sure that
1922 * is so by doing an extra call to the handler ....
1923 *
1924 * ( We do this after actually deregistering it, to make sure that a
1925 * 'real' IRQ doesn't run in parallel with our fake. )
1926 */
1927 if (action->flags & IRQF_SHARED) {
1928 local_irq_save(flags);
1929 action->handler(irq, dev_id);
1930 local_irq_restore(flags);
1931 }
1932#endif
1933
1934 /*
1935 * The action has already been removed above, but the thread writes
1936 * its oneshot mask bit when it completes. Though request_mutex is
1937 * held across this which prevents __setup_irq() from handing out
1938 * the same bit to a newly requested action.
1939 */
1940 if (action->thread) {
1941 kthread_stop(action->thread);
1942 put_task_struct(action->thread);
1943 if (action->secondary && action->secondary->thread) {
1944 kthread_stop(action->secondary->thread);
1945 put_task_struct(action->secondary->thread);
1946 }
1947 }
1948
1949 /* Last action releases resources */
1950 if (!desc->action) {
1951 /*
1952 * Reacquire bus lock as irq_release_resources() might
1953 * require it to deallocate resources over the slow bus.
1954 */
1955 chip_bus_lock(desc);
1956 /*
1957 * There is no interrupt on the fly anymore. Deactivate it
1958 * completely.
1959 */
1960 raw_spin_lock_irqsave(&desc->lock, flags);
1961 irq_domain_deactivate_irq(&desc->irq_data);
1962 raw_spin_unlock_irqrestore(&desc->lock, flags);
1963
1964 irq_release_resources(desc);
1965 chip_bus_sync_unlock(desc);
1966 irq_remove_timings(desc);
1967 }
1968
1969 mutex_unlock(&desc->request_mutex);
1970
1971 irq_chip_pm_put(&desc->irq_data);
1972 module_put(desc->owner);
1973 kfree(action->secondary);
1974 return action;
1975}
1976
1977/**
1978 * free_irq - free an interrupt allocated with request_irq
1979 * @irq: Interrupt line to free
1980 * @dev_id: Device identity to free
1981 *
1982 * Remove an interrupt handler. The handler is removed and if the
1983 * interrupt line is no longer in use by any driver it is disabled.
1984 * On a shared IRQ the caller must ensure the interrupt is disabled
1985 * on the card it drives before calling this function. The function
1986 * does not return until any executing interrupts for this IRQ
1987 * have completed.
1988 *
1989 * This function must not be called from interrupt context.
1990 *
1991 * Returns the devname argument passed to request_irq.
1992 */
1993const void *free_irq(unsigned int irq, void *dev_id)
1994{
1995 struct irq_desc *desc = irq_to_desc(irq);
1996 struct irqaction *action;
1997 const char *devname;
1998
1999 if (!desc || WARN_ON(irq_settings_is_per_cpu_devid(desc)))
2000 return NULL;
2001
2002#ifdef CONFIG_SMP
2003 if (WARN_ON(desc->affinity_notify))
2004 desc->affinity_notify = NULL;
2005#endif
2006
2007 action = __free_irq(desc, dev_id);
2008
2009 if (!action)
2010 return NULL;
2011
2012 devname = action->name;
2013 kfree(action);
2014 return devname;
2015}
2016EXPORT_SYMBOL(free_irq);
2017
2018/* This function must be called with desc->lock held */
2019static const void *__cleanup_nmi(unsigned int irq, struct irq_desc *desc)
2020{
2021 const char *devname = NULL;
2022
2023 desc->istate &= ~IRQS_NMI;
2024
2025 if (!WARN_ON(desc->action == NULL)) {
2026 irq_pm_remove_action(desc, desc->action);
2027 devname = desc->action->name;
2028 unregister_handler_proc(irq, desc->action);
2029
2030 kfree(desc->action);
2031 desc->action = NULL;
2032 }
2033
2034 irq_settings_clr_disable_unlazy(desc);
2035 irq_shutdown_and_deactivate(desc);
2036
2037 irq_release_resources(desc);
2038
2039 irq_chip_pm_put(&desc->irq_data);
2040 module_put(desc->owner);
2041
2042 return devname;
2043}
2044
2045const void *free_nmi(unsigned int irq, void *dev_id)
2046{
2047 struct irq_desc *desc = irq_to_desc(irq);
2048 unsigned long flags;
2049 const void *devname;
2050
2051 if (!desc || WARN_ON(!(desc->istate & IRQS_NMI)))
2052 return NULL;
2053
2054 if (WARN_ON(irq_settings_is_per_cpu_devid(desc)))
2055 return NULL;
2056
2057 /* NMI still enabled */
2058 if (WARN_ON(desc->depth == 0))
2059 disable_nmi_nosync(irq);
2060
2061 raw_spin_lock_irqsave(&desc->lock, flags);
2062
2063 irq_nmi_teardown(desc);
2064 devname = __cleanup_nmi(irq, desc);
2065
2066 raw_spin_unlock_irqrestore(&desc->lock, flags);
2067
2068 return devname;
2069}
2070
2071/**
2072 * request_threaded_irq - allocate an interrupt line
2073 * @irq: Interrupt line to allocate
2074 * @handler: Function to be called when the IRQ occurs.
2075 * Primary handler for threaded interrupts
2076 * If NULL and thread_fn != NULL the default
2077 * primary handler is installed
2078 * @thread_fn: Function called from the irq handler thread
2079 * If NULL, no irq thread is created
2080 * @irqflags: Interrupt type flags
2081 * @devname: An ascii name for the claiming device
2082 * @dev_id: A cookie passed back to the handler function
2083 *
2084 * This call allocates interrupt resources and enables the
2085 * interrupt line and IRQ handling. From the point this
2086 * call is made your handler function may be invoked. Since
2087 * your handler function must clear any interrupt the board
2088 * raises, you must take care both to initialise your hardware
2089 * and to set up the interrupt handler in the right order.
2090 *
2091 * If you want to set up a threaded irq handler for your device
2092 * then you need to supply @handler and @thread_fn. @handler is
2093 * still called in hard interrupt context and has to check
2094 * whether the interrupt originates from the device. If yes it
2095 * needs to disable the interrupt on the device and return
2096 * IRQ_WAKE_THREAD which will wake up the handler thread and run
2097 * @thread_fn. This split handler design is necessary to support
2098 * shared interrupts.
2099 *
2100 * Dev_id must be globally unique. Normally the address of the
2101 * device data structure is used as the cookie. Since the handler
2102 * receives this value it makes sense to use it.
2103 *
2104 * If your interrupt is shared you must pass a non NULL dev_id
2105 * as this is required when freeing the interrupt.
2106 *
2107 * Flags:
2108 *
2109 * IRQF_SHARED Interrupt is shared
2110 * IRQF_TRIGGER_* Specify active edge(s) or level
2111 *
2112 */
2113int request_threaded_irq(unsigned int irq, irq_handler_t handler,
2114 irq_handler_t thread_fn, unsigned long irqflags,
2115 const char *devname, void *dev_id)
2116{
2117 struct irqaction *action;
2118 struct irq_desc *desc;
2119 int retval;
2120
2121 if (irq == IRQ_NOTCONNECTED)
2122 return -ENOTCONN;
2123
2124 /*
2125 * Sanity-check: shared interrupts must pass in a real dev-ID,
2126 * otherwise we'll have trouble later trying to figure out
2127 * which interrupt is which (messes up the interrupt freeing
2128 * logic etc).
2129 *
2130 * Also shared interrupts do not go well with disabling auto enable.
2131 * The sharing interrupt might request it while it's still disabled
2132 * and then wait for interrupts forever.
2133 *
2134 * Also IRQF_COND_SUSPEND only makes sense for shared interrupts and
2135 * it cannot be set along with IRQF_NO_SUSPEND.
2136 */
2137 if (((irqflags & IRQF_SHARED) && !dev_id) ||
2138 ((irqflags & IRQF_SHARED) && (irqflags & IRQF_NO_AUTOEN)) ||
2139 (!(irqflags & IRQF_SHARED) && (irqflags & IRQF_COND_SUSPEND)) ||
2140 ((irqflags & IRQF_NO_SUSPEND) && (irqflags & IRQF_COND_SUSPEND)))
2141 return -EINVAL;
2142
2143 desc = irq_to_desc(irq);
2144 if (!desc)
2145 return -EINVAL;
2146
2147 if (!irq_settings_can_request(desc) ||
2148 WARN_ON(irq_settings_is_per_cpu_devid(desc)))
2149 return -EINVAL;
2150
2151 if (!handler) {
2152 if (!thread_fn)
2153 return -EINVAL;
2154 handler = irq_default_primary_handler;
2155 }
2156
2157 action = kzalloc(sizeof(struct irqaction), GFP_KERNEL);
2158 if (!action)
2159 return -ENOMEM;
2160
2161 action->handler = handler;
2162 action->thread_fn = thread_fn;
2163 action->flags = irqflags;
2164 action->name = devname;
2165 action->dev_id = dev_id;
2166
2167 retval = irq_chip_pm_get(&desc->irq_data);
2168 if (retval < 0) {
2169 kfree(action);
2170 return retval;
2171 }
2172
2173 retval = __setup_irq(irq, desc, action);
2174
2175 if (retval) {
2176 irq_chip_pm_put(&desc->irq_data);
2177 kfree(action->secondary);
2178 kfree(action);
2179 }
2180
2181#ifdef CONFIG_DEBUG_SHIRQ_FIXME
2182 if (!retval && (irqflags & IRQF_SHARED)) {
2183 /*
2184 * It's a shared IRQ -- the driver ought to be prepared for it
2185 * to happen immediately, so let's make sure....
2186 * We disable the irq to make sure that a 'real' IRQ doesn't
2187 * run in parallel with our fake.
2188 */
2189 unsigned long flags;
2190
2191 disable_irq(irq);
2192 local_irq_save(flags);
2193
2194 handler(irq, dev_id);
2195
2196 local_irq_restore(flags);
2197 enable_irq(irq);
2198 }
2199#endif
2200 return retval;
2201}
2202EXPORT_SYMBOL(request_threaded_irq);
2203
2204/**
2205 * request_any_context_irq - allocate an interrupt line
2206 * @irq: Interrupt line to allocate
2207 * @handler: Function to be called when the IRQ occurs.
2208 * Threaded handler for threaded interrupts.
2209 * @flags: Interrupt type flags
2210 * @name: An ascii name for the claiming device
2211 * @dev_id: A cookie passed back to the handler function
2212 *
2213 * This call allocates interrupt resources and enables the
2214 * interrupt line and IRQ handling. It selects either a
2215 * hardirq or threaded handling method depending on the
2216 * context.
2217 *
2218 * On failure, it returns a negative value. On success,
2219 * it returns either IRQC_IS_HARDIRQ or IRQC_IS_NESTED.
2220 */
2221int request_any_context_irq(unsigned int irq, irq_handler_t handler,
2222 unsigned long flags, const char *name, void *dev_id)
2223{
2224 struct irq_desc *desc;
2225 int ret;
2226
2227 if (irq == IRQ_NOTCONNECTED)
2228 return -ENOTCONN;
2229
2230 desc = irq_to_desc(irq);
2231 if (!desc)
2232 return -EINVAL;
2233
2234 if (irq_settings_is_nested_thread(desc)) {
2235 ret = request_threaded_irq(irq, NULL, handler,
2236 flags, name, dev_id);
2237 return !ret ? IRQC_IS_NESTED : ret;
2238 }
2239
2240 ret = request_irq(irq, handler, flags, name, dev_id);
2241 return !ret ? IRQC_IS_HARDIRQ : ret;
2242}
2243EXPORT_SYMBOL_GPL(request_any_context_irq);
2244
2245/**
2246 * request_nmi - allocate an interrupt line for NMI delivery
2247 * @irq: Interrupt line to allocate
2248 * @handler: Function to be called when the IRQ occurs.
2249 * Threaded handler for threaded interrupts.
2250 * @irqflags: Interrupt type flags
2251 * @name: An ascii name for the claiming device
2252 * @dev_id: A cookie passed back to the handler function
2253 *
2254 * This call allocates interrupt resources and enables the
2255 * interrupt line and IRQ handling. It sets up the IRQ line
2256 * to be handled as an NMI.
2257 *
2258 * An interrupt line delivering NMIs cannot be shared and IRQ handling
2259 * cannot be threaded.
2260 *
2261 * Interrupt lines requested for NMI delivering must produce per cpu
2262 * interrupts and have auto enabling setting disabled.
2263 *
2264 * Dev_id must be globally unique. Normally the address of the
2265 * device data structure is used as the cookie. Since the handler
2266 * receives this value it makes sense to use it.
2267 *
2268 * If the interrupt line cannot be used to deliver NMIs, function
2269 * will fail and return a negative value.
2270 */
2271int request_nmi(unsigned int irq, irq_handler_t handler,
2272 unsigned long irqflags, const char *name, void *dev_id)
2273{
2274 struct irqaction *action;
2275 struct irq_desc *desc;
2276 unsigned long flags;
2277 int retval;
2278
2279 if (irq == IRQ_NOTCONNECTED)
2280 return -ENOTCONN;
2281
2282 /* NMI cannot be shared, used for Polling */
2283 if (irqflags & (IRQF_SHARED | IRQF_COND_SUSPEND | IRQF_IRQPOLL))
2284 return -EINVAL;
2285
2286 if (!(irqflags & IRQF_PERCPU))
2287 return -EINVAL;
2288
2289 if (!handler)
2290 return -EINVAL;
2291
2292 desc = irq_to_desc(irq);
2293
2294 if (!desc || (irq_settings_can_autoenable(desc) &&
2295 !(irqflags & IRQF_NO_AUTOEN)) ||
2296 !irq_settings_can_request(desc) ||
2297 WARN_ON(irq_settings_is_per_cpu_devid(desc)) ||
2298 !irq_supports_nmi(desc))
2299 return -EINVAL;
2300
2301 action = kzalloc(sizeof(struct irqaction), GFP_KERNEL);
2302 if (!action)
2303 return -ENOMEM;
2304
2305 action->handler = handler;
2306 action->flags = irqflags | IRQF_NO_THREAD | IRQF_NOBALANCING;
2307 action->name = name;
2308 action->dev_id = dev_id;
2309
2310 retval = irq_chip_pm_get(&desc->irq_data);
2311 if (retval < 0)
2312 goto err_out;
2313
2314 retval = __setup_irq(irq, desc, action);
2315 if (retval)
2316 goto err_irq_setup;
2317
2318 raw_spin_lock_irqsave(&desc->lock, flags);
2319
2320 /* Setup NMI state */
2321 desc->istate |= IRQS_NMI;
2322 retval = irq_nmi_setup(desc);
2323 if (retval) {
2324 __cleanup_nmi(irq, desc);
2325 raw_spin_unlock_irqrestore(&desc->lock, flags);
2326 return -EINVAL;
2327 }
2328
2329 raw_spin_unlock_irqrestore(&desc->lock, flags);
2330
2331 return 0;
2332
2333err_irq_setup:
2334 irq_chip_pm_put(&desc->irq_data);
2335err_out:
2336 kfree(action);
2337
2338 return retval;
2339}
2340
2341void enable_percpu_irq(unsigned int irq, unsigned int type)
2342{
2343 unsigned int cpu = smp_processor_id();
2344 unsigned long flags;
2345 struct irq_desc *desc = irq_get_desc_lock(irq, &flags, IRQ_GET_DESC_CHECK_PERCPU);
2346
2347 if (!desc)
2348 return;
2349
2350 /*
2351 * If the trigger type is not specified by the caller, then
2352 * use the default for this interrupt.
2353 */
2354 type &= IRQ_TYPE_SENSE_MASK;
2355 if (type == IRQ_TYPE_NONE)
2356 type = irqd_get_trigger_type(&desc->irq_data);
2357
2358 if (type != IRQ_TYPE_NONE) {
2359 int ret;
2360
2361 ret = __irq_set_trigger(desc, type);
2362
2363 if (ret) {
2364 WARN(1, "failed to set type for IRQ%d\n", irq);
2365 goto out;
2366 }
2367 }
2368
2369 irq_percpu_enable(desc, cpu);
2370out:
2371 irq_put_desc_unlock(desc, flags);
2372}
2373EXPORT_SYMBOL_GPL(enable_percpu_irq);
2374
2375void enable_percpu_nmi(unsigned int irq, unsigned int type)
2376{
2377 enable_percpu_irq(irq, type);
2378}
2379
2380/**
2381 * irq_percpu_is_enabled - Check whether the per cpu irq is enabled
2382 * @irq: Linux irq number to check for
2383 *
2384 * Must be called from a non migratable context. Returns the enable
2385 * state of a per cpu interrupt on the current cpu.
2386 */
2387bool irq_percpu_is_enabled(unsigned int irq)
2388{
2389 unsigned int cpu = smp_processor_id();
2390 struct irq_desc *desc;
2391 unsigned long flags;
2392 bool is_enabled;
2393
2394 desc = irq_get_desc_lock(irq, &flags, IRQ_GET_DESC_CHECK_PERCPU);
2395 if (!desc)
2396 return false;
2397
2398 is_enabled = cpumask_test_cpu(cpu, desc->percpu_enabled);
2399 irq_put_desc_unlock(desc, flags);
2400
2401 return is_enabled;
2402}
2403EXPORT_SYMBOL_GPL(irq_percpu_is_enabled);
2404
2405void disable_percpu_irq(unsigned int irq)
2406{
2407 unsigned int cpu = smp_processor_id();
2408 unsigned long flags;
2409 struct irq_desc *desc = irq_get_desc_lock(irq, &flags, IRQ_GET_DESC_CHECK_PERCPU);
2410
2411 if (!desc)
2412 return;
2413
2414 irq_percpu_disable(desc, cpu);
2415 irq_put_desc_unlock(desc, flags);
2416}
2417EXPORT_SYMBOL_GPL(disable_percpu_irq);
2418
2419void disable_percpu_nmi(unsigned int irq)
2420{
2421 disable_percpu_irq(irq);
2422}
2423
2424/*
2425 * Internal function to unregister a percpu irqaction.
2426 */
2427static struct irqaction *__free_percpu_irq(unsigned int irq, void __percpu *dev_id)
2428{
2429 struct irq_desc *desc = irq_to_desc(irq);
2430 struct irqaction *action;
2431 unsigned long flags;
2432
2433 WARN(in_interrupt(), "Trying to free IRQ %d from IRQ context!\n", irq);
2434
2435 if (!desc)
2436 return NULL;
2437
2438 raw_spin_lock_irqsave(&desc->lock, flags);
2439
2440 action = desc->action;
2441 if (!action || action->percpu_dev_id != dev_id) {
2442 WARN(1, "Trying to free already-free IRQ %d\n", irq);
2443 goto bad;
2444 }
2445
2446 if (!cpumask_empty(desc->percpu_enabled)) {
2447 WARN(1, "percpu IRQ %d still enabled on CPU%d!\n",
2448 irq, cpumask_first(desc->percpu_enabled));
2449 goto bad;
2450 }
2451
2452 /* Found it - now remove it from the list of entries: */
2453 desc->action = NULL;
2454
2455 desc->istate &= ~IRQS_NMI;
2456
2457 raw_spin_unlock_irqrestore(&desc->lock, flags);
2458
2459 unregister_handler_proc(irq, action);
2460
2461 irq_chip_pm_put(&desc->irq_data);
2462 module_put(desc->owner);
2463 return action;
2464
2465bad:
2466 raw_spin_unlock_irqrestore(&desc->lock, flags);
2467 return NULL;
2468}
2469
2470/**
2471 * remove_percpu_irq - free a per-cpu interrupt
2472 * @irq: Interrupt line to free
2473 * @act: irqaction for the interrupt
2474 *
2475 * Used to remove interrupts statically setup by the early boot process.
2476 */
2477void remove_percpu_irq(unsigned int irq, struct irqaction *act)
2478{
2479 struct irq_desc *desc = irq_to_desc(irq);
2480
2481 if (desc && irq_settings_is_per_cpu_devid(desc))
2482 __free_percpu_irq(irq, act->percpu_dev_id);
2483}
2484
2485/**
2486 * free_percpu_irq - free an interrupt allocated with request_percpu_irq
2487 * @irq: Interrupt line to free
2488 * @dev_id: Device identity to free
2489 *
2490 * Remove a percpu interrupt handler. The handler is removed, but
2491 * the interrupt line is not disabled. This must be done on each
2492 * CPU before calling this function. The function does not return
2493 * until any executing interrupts for this IRQ have completed.
2494 *
2495 * This function must not be called from interrupt context.
2496 */
2497void free_percpu_irq(unsigned int irq, void __percpu *dev_id)
2498{
2499 struct irq_desc *desc = irq_to_desc(irq);
2500
2501 if (!desc || !irq_settings_is_per_cpu_devid(desc))
2502 return;
2503
2504 chip_bus_lock(desc);
2505 kfree(__free_percpu_irq(irq, dev_id));
2506 chip_bus_sync_unlock(desc);
2507}
2508EXPORT_SYMBOL_GPL(free_percpu_irq);
2509
2510void free_percpu_nmi(unsigned int irq, void __percpu *dev_id)
2511{
2512 struct irq_desc *desc = irq_to_desc(irq);
2513
2514 if (!desc || !irq_settings_is_per_cpu_devid(desc))
2515 return;
2516
2517 if (WARN_ON(!(desc->istate & IRQS_NMI)))
2518 return;
2519
2520 kfree(__free_percpu_irq(irq, dev_id));
2521}
2522
2523/**
2524 * setup_percpu_irq - setup a per-cpu interrupt
2525 * @irq: Interrupt line to setup
2526 * @act: irqaction for the interrupt
2527 *
2528 * Used to statically setup per-cpu interrupts in the early boot process.
2529 */
2530int setup_percpu_irq(unsigned int irq, struct irqaction *act)
2531{
2532 struct irq_desc *desc = irq_to_desc(irq);
2533 int retval;
2534
2535 if (!desc || !irq_settings_is_per_cpu_devid(desc))
2536 return -EINVAL;
2537
2538 retval = irq_chip_pm_get(&desc->irq_data);
2539 if (retval < 0)
2540 return retval;
2541
2542 retval = __setup_irq(irq, desc, act);
2543
2544 if (retval)
2545 irq_chip_pm_put(&desc->irq_data);
2546
2547 return retval;
2548}
2549
2550/**
2551 * __request_percpu_irq - allocate a percpu interrupt line
2552 * @irq: Interrupt line to allocate
2553 * @handler: Function to be called when the IRQ occurs.
2554 * @flags: Interrupt type flags (IRQF_TIMER only)
2555 * @devname: An ascii name for the claiming device
2556 * @dev_id: A percpu cookie passed back to the handler function
2557 *
2558 * This call allocates interrupt resources and enables the
2559 * interrupt on the local CPU. If the interrupt is supposed to be
2560 * enabled on other CPUs, it has to be done on each CPU using
2561 * enable_percpu_irq().
2562 *
2563 * Dev_id must be globally unique. It is a per-cpu variable, and
2564 * the handler gets called with the interrupted CPU's instance of
2565 * that variable.
2566 */
2567int __request_percpu_irq(unsigned int irq, irq_handler_t handler,
2568 unsigned long flags, const char *devname,
2569 void __percpu *dev_id)
2570{
2571 struct irqaction *action;
2572 struct irq_desc *desc;
2573 int retval;
2574
2575 if (!dev_id)
2576 return -EINVAL;
2577
2578 desc = irq_to_desc(irq);
2579 if (!desc || !irq_settings_can_request(desc) ||
2580 !irq_settings_is_per_cpu_devid(desc))
2581 return -EINVAL;
2582
2583 if (flags && flags != IRQF_TIMER)
2584 return -EINVAL;
2585
2586 action = kzalloc(sizeof(struct irqaction), GFP_KERNEL);
2587 if (!action)
2588 return -ENOMEM;
2589
2590 action->handler = handler;
2591 action->flags = flags | IRQF_PERCPU | IRQF_NO_SUSPEND;
2592 action->name = devname;
2593 action->percpu_dev_id = dev_id;
2594
2595 retval = irq_chip_pm_get(&desc->irq_data);
2596 if (retval < 0) {
2597 kfree(action);
2598 return retval;
2599 }
2600
2601 retval = __setup_irq(irq, desc, action);
2602
2603 if (retval) {
2604 irq_chip_pm_put(&desc->irq_data);
2605 kfree(action);
2606 }
2607
2608 return retval;
2609}
2610EXPORT_SYMBOL_GPL(__request_percpu_irq);
2611
2612/**
2613 * request_percpu_nmi - allocate a percpu interrupt line for NMI delivery
2614 * @irq: Interrupt line to allocate
2615 * @handler: Function to be called when the IRQ occurs.
2616 * @name: An ascii name for the claiming device
2617 * @dev_id: A percpu cookie passed back to the handler function
2618 *
2619 * This call allocates interrupt resources for a per CPU NMI. Per CPU NMIs
2620 * have to be setup on each CPU by calling prepare_percpu_nmi() before
2621 * being enabled on the same CPU by using enable_percpu_nmi().
2622 *
2623 * Dev_id must be globally unique. It is a per-cpu variable, and
2624 * the handler gets called with the interrupted CPU's instance of
2625 * that variable.
2626 *
2627 * Interrupt lines requested for NMI delivering should have auto enabling
2628 * setting disabled.
2629 *
2630 * If the interrupt line cannot be used to deliver NMIs, function
2631 * will fail returning a negative value.
2632 */
2633int request_percpu_nmi(unsigned int irq, irq_handler_t handler,
2634 const char *name, void __percpu *dev_id)
2635{
2636 struct irqaction *action;
2637 struct irq_desc *desc;
2638 unsigned long flags;
2639 int retval;
2640
2641 if (!handler)
2642 return -EINVAL;
2643
2644 desc = irq_to_desc(irq);
2645
2646 if (!desc || !irq_settings_can_request(desc) ||
2647 !irq_settings_is_per_cpu_devid(desc) ||
2648 irq_settings_can_autoenable(desc) ||
2649 !irq_supports_nmi(desc))
2650 return -EINVAL;
2651
2652 /* The line cannot already be NMI */
2653 if (desc->istate & IRQS_NMI)
2654 return -EINVAL;
2655
2656 action = kzalloc(sizeof(struct irqaction), GFP_KERNEL);
2657 if (!action)
2658 return -ENOMEM;
2659
2660 action->handler = handler;
2661 action->flags = IRQF_PERCPU | IRQF_NO_SUSPEND | IRQF_NO_THREAD
2662 | IRQF_NOBALANCING;
2663 action->name = name;
2664 action->percpu_dev_id = dev_id;
2665
2666 retval = irq_chip_pm_get(&desc->irq_data);
2667 if (retval < 0)
2668 goto err_out;
2669
2670 retval = __setup_irq(irq, desc, action);
2671 if (retval)
2672 goto err_irq_setup;
2673
2674 raw_spin_lock_irqsave(&desc->lock, flags);
2675 desc->istate |= IRQS_NMI;
2676 raw_spin_unlock_irqrestore(&desc->lock, flags);
2677
2678 return 0;
2679
2680err_irq_setup:
2681 irq_chip_pm_put(&desc->irq_data);
2682err_out:
2683 kfree(action);
2684
2685 return retval;
2686}
2687
2688/**
2689 * prepare_percpu_nmi - performs CPU local setup for NMI delivery
2690 * @irq: Interrupt line to prepare for NMI delivery
2691 *
2692 * This call prepares an interrupt line to deliver NMI on the current CPU,
2693 * before that interrupt line gets enabled with enable_percpu_nmi().
2694 *
2695 * As a CPU local operation, this should be called from non-preemptible
2696 * context.
2697 *
2698 * If the interrupt line cannot be used to deliver NMIs, function
2699 * will fail returning a negative value.
2700 */
2701int prepare_percpu_nmi(unsigned int irq)
2702{
2703 unsigned long flags;
2704 struct irq_desc *desc;
2705 int ret = 0;
2706
2707 WARN_ON(preemptible());
2708
2709 desc = irq_get_desc_lock(irq, &flags,
2710 IRQ_GET_DESC_CHECK_PERCPU);
2711 if (!desc)
2712 return -EINVAL;
2713
2714 if (WARN(!(desc->istate & IRQS_NMI),
2715 KERN_ERR "prepare_percpu_nmi called for a non-NMI interrupt: irq %u\n",
2716 irq)) {
2717 ret = -EINVAL;
2718 goto out;
2719 }
2720
2721 ret = irq_nmi_setup(desc);
2722 if (ret) {
2723 pr_err("Failed to setup NMI delivery: irq %u\n", irq);
2724 goto out;
2725 }
2726
2727out:
2728 irq_put_desc_unlock(desc, flags);
2729 return ret;
2730}
2731
2732/**
2733 * teardown_percpu_nmi - undoes NMI setup of IRQ line
2734 * @irq: Interrupt line from which CPU local NMI configuration should be
2735 * removed
2736 *
2737 * This call undoes the setup done by prepare_percpu_nmi().
2738 *
2739 * IRQ line should not be enabled for the current CPU.
2740 *
2741 * As a CPU local operation, this should be called from non-preemptible
2742 * context.
2743 */
2744void teardown_percpu_nmi(unsigned int irq)
2745{
2746 unsigned long flags;
2747 struct irq_desc *desc;
2748
2749 WARN_ON(preemptible());
2750
2751 desc = irq_get_desc_lock(irq, &flags,
2752 IRQ_GET_DESC_CHECK_PERCPU);
2753 if (!desc)
2754 return;
2755
2756 if (WARN_ON(!(desc->istate & IRQS_NMI)))
2757 goto out;
2758
2759 irq_nmi_teardown(desc);
2760out:
2761 irq_put_desc_unlock(desc, flags);
2762}
2763
2764int __irq_get_irqchip_state(struct irq_data *data, enum irqchip_irq_state which,
2765 bool *state)
2766{
2767 struct irq_chip *chip;
2768 int err = -EINVAL;
2769
2770 do {
2771 chip = irq_data_get_irq_chip(data);
2772 if (WARN_ON_ONCE(!chip))
2773 return -ENODEV;
2774 if (chip->irq_get_irqchip_state)
2775 break;
2776#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
2777 data = data->parent_data;
2778#else
2779 data = NULL;
2780#endif
2781 } while (data);
2782
2783 if (data)
2784 err = chip->irq_get_irqchip_state(data, which, state);
2785 return err;
2786}
2787
2788/**
2789 * irq_get_irqchip_state - returns the irqchip state of a interrupt.
2790 * @irq: Interrupt line that is forwarded to a VM
2791 * @which: One of IRQCHIP_STATE_* the caller wants to know about
2792 * @state: a pointer to a boolean where the state is to be stored
2793 *
2794 * This call snapshots the internal irqchip state of an
2795 * interrupt, returning into @state the bit corresponding to
2796 * stage @which
2797 *
2798 * This function should be called with preemption disabled if the
2799 * interrupt controller has per-cpu registers.
2800 */
2801int irq_get_irqchip_state(unsigned int irq, enum irqchip_irq_state which,
2802 bool *state)
2803{
2804 struct irq_desc *desc;
2805 struct irq_data *data;
2806 unsigned long flags;
2807 int err = -EINVAL;
2808
2809 desc = irq_get_desc_buslock(irq, &flags, 0);
2810 if (!desc)
2811 return err;
2812
2813 data = irq_desc_get_irq_data(desc);
2814
2815 err = __irq_get_irqchip_state(data, which, state);
2816
2817 irq_put_desc_busunlock(desc, flags);
2818 return err;
2819}
2820EXPORT_SYMBOL_GPL(irq_get_irqchip_state);
2821
2822/**
2823 * irq_set_irqchip_state - set the state of a forwarded interrupt.
2824 * @irq: Interrupt line that is forwarded to a VM
2825 * @which: State to be restored (one of IRQCHIP_STATE_*)
2826 * @val: Value corresponding to @which
2827 *
2828 * This call sets the internal irqchip state of an interrupt,
2829 * depending on the value of @which.
2830 *
2831 * This function should be called with preemption disabled if the
2832 * interrupt controller has per-cpu registers.
2833 */
2834int irq_set_irqchip_state(unsigned int irq, enum irqchip_irq_state which,
2835 bool val)
2836{
2837 struct irq_desc *desc;
2838 struct irq_data *data;
2839 struct irq_chip *chip;
2840 unsigned long flags;
2841 int err = -EINVAL;
2842
2843 desc = irq_get_desc_buslock(irq, &flags, 0);
2844 if (!desc)
2845 return err;
2846
2847 data = irq_desc_get_irq_data(desc);
2848
2849 do {
2850 chip = irq_data_get_irq_chip(data);
2851 if (WARN_ON_ONCE(!chip)) {
2852 err = -ENODEV;
2853 goto out_unlock;
2854 }
2855 if (chip->irq_set_irqchip_state)
2856 break;
2857#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
2858 data = data->parent_data;
2859#else
2860 data = NULL;
2861#endif
2862 } while (data);
2863
2864 if (data)
2865 err = chip->irq_set_irqchip_state(data, which, val);
2866
2867out_unlock:
2868 irq_put_desc_busunlock(desc, flags);
2869 return err;
2870}
2871EXPORT_SYMBOL_GPL(irq_set_irqchip_state);
2872
2873/**
2874 * irq_has_action - Check whether an interrupt is requested
2875 * @irq: The linux irq number
2876 *
2877 * Returns: A snapshot of the current state
2878 */
2879bool irq_has_action(unsigned int irq)
2880{
2881 bool res;
2882
2883 rcu_read_lock();
2884 res = irq_desc_has_action(irq_to_desc(irq));
2885 rcu_read_unlock();
2886 return res;
2887}
2888EXPORT_SYMBOL_GPL(irq_has_action);
2889
2890/**
2891 * irq_check_status_bit - Check whether bits in the irq descriptor status are set
2892 * @irq: The linux irq number
2893 * @bitmask: The bitmask to evaluate
2894 *
2895 * Returns: True if one of the bits in @bitmask is set
2896 */
2897bool irq_check_status_bit(unsigned int irq, unsigned int bitmask)
2898{
2899 struct irq_desc *desc;
2900 bool res = false;
2901
2902 rcu_read_lock();
2903 desc = irq_to_desc(irq);
2904 if (desc)
2905 res = !!(desc->status_use_accessors & bitmask);
2906 rcu_read_unlock();
2907 return res;
2908}
2909EXPORT_SYMBOL_GPL(irq_check_status_bit);