Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2#include <linux/init.h>
3
4#include <linux/mm.h>
5#include <linux/spinlock.h>
6#include <linux/smp.h>
7#include <linux/interrupt.h>
8#include <linux/export.h>
9#include <linux/cpu.h>
10#include <linux/debugfs.h>
11
12#include <asm/tlbflush.h>
13#include <asm/mmu_context.h>
14#include <asm/nospec-branch.h>
15#include <asm/cache.h>
16#include <asm/apic.h>
17#include <asm/uv/uv.h>
18
19#include "mm_internal.h"
20
21#ifdef CONFIG_PARAVIRT
22# define STATIC_NOPV
23#else
24# define STATIC_NOPV static
25# define __flush_tlb_local native_flush_tlb_local
26# define __flush_tlb_global native_flush_tlb_global
27# define __flush_tlb_one_user(addr) native_flush_tlb_one_user(addr)
28# define __flush_tlb_others(msk, info) native_flush_tlb_others(msk, info)
29#endif
30
31/*
32 * TLB flushing, formerly SMP-only
33 * c/o Linus Torvalds.
34 *
35 * These mean you can really definitely utterly forget about
36 * writing to user space from interrupts. (Its not allowed anyway).
37 *
38 * Optimizations Manfred Spraul <manfred@colorfullife.com>
39 *
40 * More scalable flush, from Andi Kleen
41 *
42 * Implement flush IPI by CALL_FUNCTION_VECTOR, Alex Shi
43 */
44
45/*
46 * Use bit 0 to mangle the TIF_SPEC_IB state into the mm pointer which is
47 * stored in cpu_tlb_state.last_user_mm_ibpb.
48 */
49#define LAST_USER_MM_IBPB 0x1UL
50
51/*
52 * The x86 feature is called PCID (Process Context IDentifier). It is similar
53 * to what is traditionally called ASID on the RISC processors.
54 *
55 * We don't use the traditional ASID implementation, where each process/mm gets
56 * its own ASID and flush/restart when we run out of ASID space.
57 *
58 * Instead we have a small per-cpu array of ASIDs and cache the last few mm's
59 * that came by on this CPU, allowing cheaper switch_mm between processes on
60 * this CPU.
61 *
62 * We end up with different spaces for different things. To avoid confusion we
63 * use different names for each of them:
64 *
65 * ASID - [0, TLB_NR_DYN_ASIDS-1]
66 * the canonical identifier for an mm
67 *
68 * kPCID - [1, TLB_NR_DYN_ASIDS]
69 * the value we write into the PCID part of CR3; corresponds to the
70 * ASID+1, because PCID 0 is special.
71 *
72 * uPCID - [2048 + 1, 2048 + TLB_NR_DYN_ASIDS]
73 * for KPTI each mm has two address spaces and thus needs two
74 * PCID values, but we can still do with a single ASID denomination
75 * for each mm. Corresponds to kPCID + 2048.
76 *
77 */
78
79/* There are 12 bits of space for ASIDS in CR3 */
80#define CR3_HW_ASID_BITS 12
81
82/*
83 * When enabled, PAGE_TABLE_ISOLATION consumes a single bit for
84 * user/kernel switches
85 */
86#ifdef CONFIG_PAGE_TABLE_ISOLATION
87# define PTI_CONSUMED_PCID_BITS 1
88#else
89# define PTI_CONSUMED_PCID_BITS 0
90#endif
91
92#define CR3_AVAIL_PCID_BITS (X86_CR3_PCID_BITS - PTI_CONSUMED_PCID_BITS)
93
94/*
95 * ASIDs are zero-based: 0->MAX_AVAIL_ASID are valid. -1 below to account
96 * for them being zero-based. Another -1 is because PCID 0 is reserved for
97 * use by non-PCID-aware users.
98 */
99#define MAX_ASID_AVAILABLE ((1 << CR3_AVAIL_PCID_BITS) - 2)
100
101/*
102 * Given @asid, compute kPCID
103 */
104static inline u16 kern_pcid(u16 asid)
105{
106 VM_WARN_ON_ONCE(asid > MAX_ASID_AVAILABLE);
107
108#ifdef CONFIG_PAGE_TABLE_ISOLATION
109 /*
110 * Make sure that the dynamic ASID space does not confict with the
111 * bit we are using to switch between user and kernel ASIDs.
112 */
113 BUILD_BUG_ON(TLB_NR_DYN_ASIDS >= (1 << X86_CR3_PTI_PCID_USER_BIT));
114
115 /*
116 * The ASID being passed in here should have respected the
117 * MAX_ASID_AVAILABLE and thus never have the switch bit set.
118 */
119 VM_WARN_ON_ONCE(asid & (1 << X86_CR3_PTI_PCID_USER_BIT));
120#endif
121 /*
122 * The dynamically-assigned ASIDs that get passed in are small
123 * (<TLB_NR_DYN_ASIDS). They never have the high switch bit set,
124 * so do not bother to clear it.
125 *
126 * If PCID is on, ASID-aware code paths put the ASID+1 into the
127 * PCID bits. This serves two purposes. It prevents a nasty
128 * situation in which PCID-unaware code saves CR3, loads some other
129 * value (with PCID == 0), and then restores CR3, thus corrupting
130 * the TLB for ASID 0 if the saved ASID was nonzero. It also means
131 * that any bugs involving loading a PCID-enabled CR3 with
132 * CR4.PCIDE off will trigger deterministically.
133 */
134 return asid + 1;
135}
136
137/*
138 * Given @asid, compute uPCID
139 */
140static inline u16 user_pcid(u16 asid)
141{
142 u16 ret = kern_pcid(asid);
143#ifdef CONFIG_PAGE_TABLE_ISOLATION
144 ret |= 1 << X86_CR3_PTI_PCID_USER_BIT;
145#endif
146 return ret;
147}
148
149static inline unsigned long build_cr3(pgd_t *pgd, u16 asid)
150{
151 if (static_cpu_has(X86_FEATURE_PCID)) {
152 return __sme_pa(pgd) | kern_pcid(asid);
153 } else {
154 VM_WARN_ON_ONCE(asid != 0);
155 return __sme_pa(pgd);
156 }
157}
158
159static inline unsigned long build_cr3_noflush(pgd_t *pgd, u16 asid)
160{
161 VM_WARN_ON_ONCE(asid > MAX_ASID_AVAILABLE);
162 /*
163 * Use boot_cpu_has() instead of this_cpu_has() as this function
164 * might be called during early boot. This should work even after
165 * boot because all CPU's the have same capabilities:
166 */
167 VM_WARN_ON_ONCE(!boot_cpu_has(X86_FEATURE_PCID));
168 return __sme_pa(pgd) | kern_pcid(asid) | CR3_NOFLUSH;
169}
170
171/*
172 * We get here when we do something requiring a TLB invalidation
173 * but could not go invalidate all of the contexts. We do the
174 * necessary invalidation by clearing out the 'ctx_id' which
175 * forces a TLB flush when the context is loaded.
176 */
177static void clear_asid_other(void)
178{
179 u16 asid;
180
181 /*
182 * This is only expected to be set if we have disabled
183 * kernel _PAGE_GLOBAL pages.
184 */
185 if (!static_cpu_has(X86_FEATURE_PTI)) {
186 WARN_ON_ONCE(1);
187 return;
188 }
189
190 for (asid = 0; asid < TLB_NR_DYN_ASIDS; asid++) {
191 /* Do not need to flush the current asid */
192 if (asid == this_cpu_read(cpu_tlbstate.loaded_mm_asid))
193 continue;
194 /*
195 * Make sure the next time we go to switch to
196 * this asid, we do a flush:
197 */
198 this_cpu_write(cpu_tlbstate.ctxs[asid].ctx_id, 0);
199 }
200 this_cpu_write(cpu_tlbstate.invalidate_other, false);
201}
202
203atomic64_t last_mm_ctx_id = ATOMIC64_INIT(1);
204
205
206static void choose_new_asid(struct mm_struct *next, u64 next_tlb_gen,
207 u16 *new_asid, bool *need_flush)
208{
209 u16 asid;
210
211 if (!static_cpu_has(X86_FEATURE_PCID)) {
212 *new_asid = 0;
213 *need_flush = true;
214 return;
215 }
216
217 if (this_cpu_read(cpu_tlbstate.invalidate_other))
218 clear_asid_other();
219
220 for (asid = 0; asid < TLB_NR_DYN_ASIDS; asid++) {
221 if (this_cpu_read(cpu_tlbstate.ctxs[asid].ctx_id) !=
222 next->context.ctx_id)
223 continue;
224
225 *new_asid = asid;
226 *need_flush = (this_cpu_read(cpu_tlbstate.ctxs[asid].tlb_gen) <
227 next_tlb_gen);
228 return;
229 }
230
231 /*
232 * We don't currently own an ASID slot on this CPU.
233 * Allocate a slot.
234 */
235 *new_asid = this_cpu_add_return(cpu_tlbstate.next_asid, 1) - 1;
236 if (*new_asid >= TLB_NR_DYN_ASIDS) {
237 *new_asid = 0;
238 this_cpu_write(cpu_tlbstate.next_asid, 1);
239 }
240 *need_flush = true;
241}
242
243/*
244 * Given an ASID, flush the corresponding user ASID. We can delay this
245 * until the next time we switch to it.
246 *
247 * See SWITCH_TO_USER_CR3.
248 */
249static inline void invalidate_user_asid(u16 asid)
250{
251 /* There is no user ASID if address space separation is off */
252 if (!IS_ENABLED(CONFIG_PAGE_TABLE_ISOLATION))
253 return;
254
255 /*
256 * We only have a single ASID if PCID is off and the CR3
257 * write will have flushed it.
258 */
259 if (!cpu_feature_enabled(X86_FEATURE_PCID))
260 return;
261
262 if (!static_cpu_has(X86_FEATURE_PTI))
263 return;
264
265 __set_bit(kern_pcid(asid),
266 (unsigned long *)this_cpu_ptr(&cpu_tlbstate.user_pcid_flush_mask));
267}
268
269static void load_new_mm_cr3(pgd_t *pgdir, u16 new_asid, bool need_flush)
270{
271 unsigned long new_mm_cr3;
272
273 if (need_flush) {
274 invalidate_user_asid(new_asid);
275 new_mm_cr3 = build_cr3(pgdir, new_asid);
276 } else {
277 new_mm_cr3 = build_cr3_noflush(pgdir, new_asid);
278 }
279
280 /*
281 * Caution: many callers of this function expect
282 * that load_cr3() is serializing and orders TLB
283 * fills with respect to the mm_cpumask writes.
284 */
285 write_cr3(new_mm_cr3);
286}
287
288void leave_mm(int cpu)
289{
290 struct mm_struct *loaded_mm = this_cpu_read(cpu_tlbstate.loaded_mm);
291
292 /*
293 * It's plausible that we're in lazy TLB mode while our mm is init_mm.
294 * If so, our callers still expect us to flush the TLB, but there
295 * aren't any user TLB entries in init_mm to worry about.
296 *
297 * This needs to happen before any other sanity checks due to
298 * intel_idle's shenanigans.
299 */
300 if (loaded_mm == &init_mm)
301 return;
302
303 /* Warn if we're not lazy. */
304 WARN_ON(!this_cpu_read(cpu_tlbstate.is_lazy));
305
306 switch_mm(NULL, &init_mm, NULL);
307}
308EXPORT_SYMBOL_GPL(leave_mm);
309
310void switch_mm(struct mm_struct *prev, struct mm_struct *next,
311 struct task_struct *tsk)
312{
313 unsigned long flags;
314
315 local_irq_save(flags);
316 switch_mm_irqs_off(prev, next, tsk);
317 local_irq_restore(flags);
318}
319
320static inline unsigned long mm_mangle_tif_spec_ib(struct task_struct *next)
321{
322 unsigned long next_tif = task_thread_info(next)->flags;
323 unsigned long ibpb = (next_tif >> TIF_SPEC_IB) & LAST_USER_MM_IBPB;
324
325 return (unsigned long)next->mm | ibpb;
326}
327
328static void cond_ibpb(struct task_struct *next)
329{
330 if (!next || !next->mm)
331 return;
332
333 /*
334 * Both, the conditional and the always IBPB mode use the mm
335 * pointer to avoid the IBPB when switching between tasks of the
336 * same process. Using the mm pointer instead of mm->context.ctx_id
337 * opens a hypothetical hole vs. mm_struct reuse, which is more or
338 * less impossible to control by an attacker. Aside of that it
339 * would only affect the first schedule so the theoretically
340 * exposed data is not really interesting.
341 */
342 if (static_branch_likely(&switch_mm_cond_ibpb)) {
343 unsigned long prev_mm, next_mm;
344
345 /*
346 * This is a bit more complex than the always mode because
347 * it has to handle two cases:
348 *
349 * 1) Switch from a user space task (potential attacker)
350 * which has TIF_SPEC_IB set to a user space task
351 * (potential victim) which has TIF_SPEC_IB not set.
352 *
353 * 2) Switch from a user space task (potential attacker)
354 * which has TIF_SPEC_IB not set to a user space task
355 * (potential victim) which has TIF_SPEC_IB set.
356 *
357 * This could be done by unconditionally issuing IBPB when
358 * a task which has TIF_SPEC_IB set is either scheduled in
359 * or out. Though that results in two flushes when:
360 *
361 * - the same user space task is scheduled out and later
362 * scheduled in again and only a kernel thread ran in
363 * between.
364 *
365 * - a user space task belonging to the same process is
366 * scheduled in after a kernel thread ran in between
367 *
368 * - a user space task belonging to the same process is
369 * scheduled in immediately.
370 *
371 * Optimize this with reasonably small overhead for the
372 * above cases. Mangle the TIF_SPEC_IB bit into the mm
373 * pointer of the incoming task which is stored in
374 * cpu_tlbstate.last_user_mm_ibpb for comparison.
375 */
376 next_mm = mm_mangle_tif_spec_ib(next);
377 prev_mm = this_cpu_read(cpu_tlbstate.last_user_mm_ibpb);
378
379 /*
380 * Issue IBPB only if the mm's are different and one or
381 * both have the IBPB bit set.
382 */
383 if (next_mm != prev_mm &&
384 (next_mm | prev_mm) & LAST_USER_MM_IBPB)
385 indirect_branch_prediction_barrier();
386
387 this_cpu_write(cpu_tlbstate.last_user_mm_ibpb, next_mm);
388 }
389
390 if (static_branch_unlikely(&switch_mm_always_ibpb)) {
391 /*
392 * Only flush when switching to a user space task with a
393 * different context than the user space task which ran
394 * last on this CPU.
395 */
396 if (this_cpu_read(cpu_tlbstate.last_user_mm) != next->mm) {
397 indirect_branch_prediction_barrier();
398 this_cpu_write(cpu_tlbstate.last_user_mm, next->mm);
399 }
400 }
401}
402
403#ifdef CONFIG_PERF_EVENTS
404static inline void cr4_update_pce_mm(struct mm_struct *mm)
405{
406 if (static_branch_unlikely(&rdpmc_always_available_key) ||
407 (!static_branch_unlikely(&rdpmc_never_available_key) &&
408 atomic_read(&mm->context.perf_rdpmc_allowed)))
409 cr4_set_bits_irqsoff(X86_CR4_PCE);
410 else
411 cr4_clear_bits_irqsoff(X86_CR4_PCE);
412}
413
414void cr4_update_pce(void *ignored)
415{
416 cr4_update_pce_mm(this_cpu_read(cpu_tlbstate.loaded_mm));
417}
418
419#else
420static inline void cr4_update_pce_mm(struct mm_struct *mm) { }
421#endif
422
423void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next,
424 struct task_struct *tsk)
425{
426 struct mm_struct *real_prev = this_cpu_read(cpu_tlbstate.loaded_mm);
427 u16 prev_asid = this_cpu_read(cpu_tlbstate.loaded_mm_asid);
428 bool was_lazy = this_cpu_read(cpu_tlbstate.is_lazy);
429 unsigned cpu = smp_processor_id();
430 u64 next_tlb_gen;
431 bool need_flush;
432 u16 new_asid;
433
434 /*
435 * NB: The scheduler will call us with prev == next when switching
436 * from lazy TLB mode to normal mode if active_mm isn't changing.
437 * When this happens, we don't assume that CR3 (and hence
438 * cpu_tlbstate.loaded_mm) matches next.
439 *
440 * NB: leave_mm() calls us with prev == NULL and tsk == NULL.
441 */
442
443 /* We don't want flush_tlb_func_* to run concurrently with us. */
444 if (IS_ENABLED(CONFIG_PROVE_LOCKING))
445 WARN_ON_ONCE(!irqs_disabled());
446
447 /*
448 * Verify that CR3 is what we think it is. This will catch
449 * hypothetical buggy code that directly switches to swapper_pg_dir
450 * without going through leave_mm() / switch_mm_irqs_off() or that
451 * does something like write_cr3(read_cr3_pa()).
452 *
453 * Only do this check if CONFIG_DEBUG_VM=y because __read_cr3()
454 * isn't free.
455 */
456#ifdef CONFIG_DEBUG_VM
457 if (WARN_ON_ONCE(__read_cr3() != build_cr3(real_prev->pgd, prev_asid))) {
458 /*
459 * If we were to BUG here, we'd be very likely to kill
460 * the system so hard that we don't see the call trace.
461 * Try to recover instead by ignoring the error and doing
462 * a global flush to minimize the chance of corruption.
463 *
464 * (This is far from being a fully correct recovery.
465 * Architecturally, the CPU could prefetch something
466 * back into an incorrect ASID slot and leave it there
467 * to cause trouble down the road. It's better than
468 * nothing, though.)
469 */
470 __flush_tlb_all();
471 }
472#endif
473 this_cpu_write(cpu_tlbstate.is_lazy, false);
474
475 /*
476 * The membarrier system call requires a full memory barrier and
477 * core serialization before returning to user-space, after
478 * storing to rq->curr. Writing to CR3 provides that full
479 * memory barrier and core serializing instruction.
480 */
481 if (real_prev == next) {
482 VM_WARN_ON(this_cpu_read(cpu_tlbstate.ctxs[prev_asid].ctx_id) !=
483 next->context.ctx_id);
484
485 /*
486 * Even in lazy TLB mode, the CPU should stay set in the
487 * mm_cpumask. The TLB shootdown code can figure out from
488 * from cpu_tlbstate.is_lazy whether or not to send an IPI.
489 */
490 if (WARN_ON_ONCE(real_prev != &init_mm &&
491 !cpumask_test_cpu(cpu, mm_cpumask(next))))
492 cpumask_set_cpu(cpu, mm_cpumask(next));
493
494 /*
495 * If the CPU is not in lazy TLB mode, we are just switching
496 * from one thread in a process to another thread in the same
497 * process. No TLB flush required.
498 */
499 if (!was_lazy)
500 return;
501
502 /*
503 * Read the tlb_gen to check whether a flush is needed.
504 * If the TLB is up to date, just use it.
505 * The barrier synchronizes with the tlb_gen increment in
506 * the TLB shootdown code.
507 */
508 smp_mb();
509 next_tlb_gen = atomic64_read(&next->context.tlb_gen);
510 if (this_cpu_read(cpu_tlbstate.ctxs[prev_asid].tlb_gen) ==
511 next_tlb_gen)
512 return;
513
514 /*
515 * TLB contents went out of date while we were in lazy
516 * mode. Fall through to the TLB switching code below.
517 */
518 new_asid = prev_asid;
519 need_flush = true;
520 } else {
521 /*
522 * Avoid user/user BTB poisoning by flushing the branch
523 * predictor when switching between processes. This stops
524 * one process from doing Spectre-v2 attacks on another.
525 */
526 cond_ibpb(tsk);
527
528 /*
529 * Stop remote flushes for the previous mm.
530 * Skip kernel threads; we never send init_mm TLB flushing IPIs,
531 * but the bitmap manipulation can cause cache line contention.
532 */
533 if (real_prev != &init_mm) {
534 VM_WARN_ON_ONCE(!cpumask_test_cpu(cpu,
535 mm_cpumask(real_prev)));
536 cpumask_clear_cpu(cpu, mm_cpumask(real_prev));
537 }
538
539 /*
540 * Start remote flushes and then read tlb_gen.
541 */
542 if (next != &init_mm)
543 cpumask_set_cpu(cpu, mm_cpumask(next));
544 next_tlb_gen = atomic64_read(&next->context.tlb_gen);
545
546 choose_new_asid(next, next_tlb_gen, &new_asid, &need_flush);
547
548 /* Let nmi_uaccess_okay() know that we're changing CR3. */
549 this_cpu_write(cpu_tlbstate.loaded_mm, LOADED_MM_SWITCHING);
550 barrier();
551 }
552
553 if (need_flush) {
554 this_cpu_write(cpu_tlbstate.ctxs[new_asid].ctx_id, next->context.ctx_id);
555 this_cpu_write(cpu_tlbstate.ctxs[new_asid].tlb_gen, next_tlb_gen);
556 load_new_mm_cr3(next->pgd, new_asid, true);
557
558 trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL);
559 } else {
560 /* The new ASID is already up to date. */
561 load_new_mm_cr3(next->pgd, new_asid, false);
562
563 trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, 0);
564 }
565
566 /* Make sure we write CR3 before loaded_mm. */
567 barrier();
568
569 this_cpu_write(cpu_tlbstate.loaded_mm, next);
570 this_cpu_write(cpu_tlbstate.loaded_mm_asid, new_asid);
571
572 if (next != real_prev) {
573 cr4_update_pce_mm(next);
574 switch_ldt(real_prev, next);
575 }
576}
577
578/*
579 * Please ignore the name of this function. It should be called
580 * switch_to_kernel_thread().
581 *
582 * enter_lazy_tlb() is a hint from the scheduler that we are entering a
583 * kernel thread or other context without an mm. Acceptable implementations
584 * include doing nothing whatsoever, switching to init_mm, or various clever
585 * lazy tricks to try to minimize TLB flushes.
586 *
587 * The scheduler reserves the right to call enter_lazy_tlb() several times
588 * in a row. It will notify us that we're going back to a real mm by
589 * calling switch_mm_irqs_off().
590 */
591void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
592{
593 if (this_cpu_read(cpu_tlbstate.loaded_mm) == &init_mm)
594 return;
595
596 this_cpu_write(cpu_tlbstate.is_lazy, true);
597}
598
599/*
600 * Call this when reinitializing a CPU. It fixes the following potential
601 * problems:
602 *
603 * - The ASID changed from what cpu_tlbstate thinks it is (most likely
604 * because the CPU was taken down and came back up with CR3's PCID
605 * bits clear. CPU hotplug can do this.
606 *
607 * - The TLB contains junk in slots corresponding to inactive ASIDs.
608 *
609 * - The CPU went so far out to lunch that it may have missed a TLB
610 * flush.
611 */
612void initialize_tlbstate_and_flush(void)
613{
614 int i;
615 struct mm_struct *mm = this_cpu_read(cpu_tlbstate.loaded_mm);
616 u64 tlb_gen = atomic64_read(&init_mm.context.tlb_gen);
617 unsigned long cr3 = __read_cr3();
618
619 /* Assert that CR3 already references the right mm. */
620 WARN_ON((cr3 & CR3_ADDR_MASK) != __pa(mm->pgd));
621
622 /*
623 * Assert that CR4.PCIDE is set if needed. (CR4.PCIDE initialization
624 * doesn't work like other CR4 bits because it can only be set from
625 * long mode.)
626 */
627 WARN_ON(boot_cpu_has(X86_FEATURE_PCID) &&
628 !(cr4_read_shadow() & X86_CR4_PCIDE));
629
630 /* Force ASID 0 and force a TLB flush. */
631 write_cr3(build_cr3(mm->pgd, 0));
632
633 /* Reinitialize tlbstate. */
634 this_cpu_write(cpu_tlbstate.last_user_mm_ibpb, LAST_USER_MM_IBPB);
635 this_cpu_write(cpu_tlbstate.loaded_mm_asid, 0);
636 this_cpu_write(cpu_tlbstate.next_asid, 1);
637 this_cpu_write(cpu_tlbstate.ctxs[0].ctx_id, mm->context.ctx_id);
638 this_cpu_write(cpu_tlbstate.ctxs[0].tlb_gen, tlb_gen);
639
640 for (i = 1; i < TLB_NR_DYN_ASIDS; i++)
641 this_cpu_write(cpu_tlbstate.ctxs[i].ctx_id, 0);
642}
643
644/*
645 * flush_tlb_func_common()'s memory ordering requirement is that any
646 * TLB fills that happen after we flush the TLB are ordered after we
647 * read active_mm's tlb_gen. We don't need any explicit barriers
648 * because all x86 flush operations are serializing and the
649 * atomic64_read operation won't be reordered by the compiler.
650 */
651static void flush_tlb_func_common(const struct flush_tlb_info *f,
652 bool local, enum tlb_flush_reason reason)
653{
654 /*
655 * We have three different tlb_gen values in here. They are:
656 *
657 * - mm_tlb_gen: the latest generation.
658 * - local_tlb_gen: the generation that this CPU has already caught
659 * up to.
660 * - f->new_tlb_gen: the generation that the requester of the flush
661 * wants us to catch up to.
662 */
663 struct mm_struct *loaded_mm = this_cpu_read(cpu_tlbstate.loaded_mm);
664 u32 loaded_mm_asid = this_cpu_read(cpu_tlbstate.loaded_mm_asid);
665 u64 mm_tlb_gen = atomic64_read(&loaded_mm->context.tlb_gen);
666 u64 local_tlb_gen = this_cpu_read(cpu_tlbstate.ctxs[loaded_mm_asid].tlb_gen);
667
668 /* This code cannot presently handle being reentered. */
669 VM_WARN_ON(!irqs_disabled());
670
671 if (unlikely(loaded_mm == &init_mm))
672 return;
673
674 VM_WARN_ON(this_cpu_read(cpu_tlbstate.ctxs[loaded_mm_asid].ctx_id) !=
675 loaded_mm->context.ctx_id);
676
677 if (this_cpu_read(cpu_tlbstate.is_lazy)) {
678 /*
679 * We're in lazy mode. We need to at least flush our
680 * paging-structure cache to avoid speculatively reading
681 * garbage into our TLB. Since switching to init_mm is barely
682 * slower than a minimal flush, just switch to init_mm.
683 *
684 * This should be rare, with native_flush_tlb_others skipping
685 * IPIs to lazy TLB mode CPUs.
686 */
687 switch_mm_irqs_off(NULL, &init_mm, NULL);
688 return;
689 }
690
691 if (unlikely(local_tlb_gen == mm_tlb_gen)) {
692 /*
693 * There's nothing to do: we're already up to date. This can
694 * happen if two concurrent flushes happen -- the first flush to
695 * be handled can catch us all the way up, leaving no work for
696 * the second flush.
697 */
698 trace_tlb_flush(reason, 0);
699 return;
700 }
701
702 WARN_ON_ONCE(local_tlb_gen > mm_tlb_gen);
703 WARN_ON_ONCE(f->new_tlb_gen > mm_tlb_gen);
704
705 /*
706 * If we get to this point, we know that our TLB is out of date.
707 * This does not strictly imply that we need to flush (it's
708 * possible that f->new_tlb_gen <= local_tlb_gen), but we're
709 * going to need to flush in the very near future, so we might
710 * as well get it over with.
711 *
712 * The only question is whether to do a full or partial flush.
713 *
714 * We do a partial flush if requested and two extra conditions
715 * are met:
716 *
717 * 1. f->new_tlb_gen == local_tlb_gen + 1. We have an invariant that
718 * we've always done all needed flushes to catch up to
719 * local_tlb_gen. If, for example, local_tlb_gen == 2 and
720 * f->new_tlb_gen == 3, then we know that the flush needed to bring
721 * us up to date for tlb_gen 3 is the partial flush we're
722 * processing.
723 *
724 * As an example of why this check is needed, suppose that there
725 * are two concurrent flushes. The first is a full flush that
726 * changes context.tlb_gen from 1 to 2. The second is a partial
727 * flush that changes context.tlb_gen from 2 to 3. If they get
728 * processed on this CPU in reverse order, we'll see
729 * local_tlb_gen == 1, mm_tlb_gen == 3, and end != TLB_FLUSH_ALL.
730 * If we were to use __flush_tlb_one_user() and set local_tlb_gen to
731 * 3, we'd be break the invariant: we'd update local_tlb_gen above
732 * 1 without the full flush that's needed for tlb_gen 2.
733 *
734 * 2. f->new_tlb_gen == mm_tlb_gen. This is purely an optimiation.
735 * Partial TLB flushes are not all that much cheaper than full TLB
736 * flushes, so it seems unlikely that it would be a performance win
737 * to do a partial flush if that won't bring our TLB fully up to
738 * date. By doing a full flush instead, we can increase
739 * local_tlb_gen all the way to mm_tlb_gen and we can probably
740 * avoid another flush in the very near future.
741 */
742 if (f->end != TLB_FLUSH_ALL &&
743 f->new_tlb_gen == local_tlb_gen + 1 &&
744 f->new_tlb_gen == mm_tlb_gen) {
745 /* Partial flush */
746 unsigned long nr_invalidate = (f->end - f->start) >> f->stride_shift;
747 unsigned long addr = f->start;
748
749 while (addr < f->end) {
750 flush_tlb_one_user(addr);
751 addr += 1UL << f->stride_shift;
752 }
753 if (local)
754 count_vm_tlb_events(NR_TLB_LOCAL_FLUSH_ONE, nr_invalidate);
755 trace_tlb_flush(reason, nr_invalidate);
756 } else {
757 /* Full flush. */
758 flush_tlb_local();
759 if (local)
760 count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL);
761 trace_tlb_flush(reason, TLB_FLUSH_ALL);
762 }
763
764 /* Both paths above update our state to mm_tlb_gen. */
765 this_cpu_write(cpu_tlbstate.ctxs[loaded_mm_asid].tlb_gen, mm_tlb_gen);
766}
767
768static void flush_tlb_func_local(const void *info, enum tlb_flush_reason reason)
769{
770 const struct flush_tlb_info *f = info;
771
772 flush_tlb_func_common(f, true, reason);
773}
774
775static void flush_tlb_func_remote(void *info)
776{
777 const struct flush_tlb_info *f = info;
778
779 inc_irq_stat(irq_tlb_count);
780
781 if (f->mm && f->mm != this_cpu_read(cpu_tlbstate.loaded_mm))
782 return;
783
784 count_vm_tlb_event(NR_TLB_REMOTE_FLUSH_RECEIVED);
785 flush_tlb_func_common(f, false, TLB_REMOTE_SHOOTDOWN);
786}
787
788static bool tlb_is_not_lazy(int cpu, void *data)
789{
790 return !per_cpu(cpu_tlbstate.is_lazy, cpu);
791}
792
793STATIC_NOPV void native_flush_tlb_others(const struct cpumask *cpumask,
794 const struct flush_tlb_info *info)
795{
796 count_vm_tlb_event(NR_TLB_REMOTE_FLUSH);
797 if (info->end == TLB_FLUSH_ALL)
798 trace_tlb_flush(TLB_REMOTE_SEND_IPI, TLB_FLUSH_ALL);
799 else
800 trace_tlb_flush(TLB_REMOTE_SEND_IPI,
801 (info->end - info->start) >> PAGE_SHIFT);
802
803 if (is_uv_system()) {
804 /*
805 * This whole special case is confused. UV has a "Broadcast
806 * Assist Unit", which seems to be a fancy way to send IPIs.
807 * Back when x86 used an explicit TLB flush IPI, UV was
808 * optimized to use its own mechanism. These days, x86 uses
809 * smp_call_function_many(), but UV still uses a manual IPI,
810 * and that IPI's action is out of date -- it does a manual
811 * flush instead of calling flush_tlb_func_remote(). This
812 * means that the percpu tlb_gen variables won't be updated
813 * and we'll do pointless flushes on future context switches.
814 *
815 * Rather than hooking native_flush_tlb_others() here, I think
816 * that UV should be updated so that smp_call_function_many(),
817 * etc, are optimal on UV.
818 */
819 cpumask = uv_flush_tlb_others(cpumask, info);
820 if (cpumask)
821 smp_call_function_many(cpumask, flush_tlb_func_remote,
822 (void *)info, 1);
823 return;
824 }
825
826 /*
827 * If no page tables were freed, we can skip sending IPIs to
828 * CPUs in lazy TLB mode. They will flush the CPU themselves
829 * at the next context switch.
830 *
831 * However, if page tables are getting freed, we need to send the
832 * IPI everywhere, to prevent CPUs in lazy TLB mode from tripping
833 * up on the new contents of what used to be page tables, while
834 * doing a speculative memory access.
835 */
836 if (info->freed_tables)
837 smp_call_function_many(cpumask, flush_tlb_func_remote,
838 (void *)info, 1);
839 else
840 on_each_cpu_cond_mask(tlb_is_not_lazy, flush_tlb_func_remote,
841 (void *)info, 1, cpumask);
842}
843
844void flush_tlb_others(const struct cpumask *cpumask,
845 const struct flush_tlb_info *info)
846{
847 __flush_tlb_others(cpumask, info);
848}
849
850/*
851 * See Documentation/x86/tlb.rst for details. We choose 33
852 * because it is large enough to cover the vast majority (at
853 * least 95%) of allocations, and is small enough that we are
854 * confident it will not cause too much overhead. Each single
855 * flush is about 100 ns, so this caps the maximum overhead at
856 * _about_ 3,000 ns.
857 *
858 * This is in units of pages.
859 */
860unsigned long tlb_single_page_flush_ceiling __read_mostly = 33;
861
862static DEFINE_PER_CPU_SHARED_ALIGNED(struct flush_tlb_info, flush_tlb_info);
863
864#ifdef CONFIG_DEBUG_VM
865static DEFINE_PER_CPU(unsigned int, flush_tlb_info_idx);
866#endif
867
868static inline struct flush_tlb_info *get_flush_tlb_info(struct mm_struct *mm,
869 unsigned long start, unsigned long end,
870 unsigned int stride_shift, bool freed_tables,
871 u64 new_tlb_gen)
872{
873 struct flush_tlb_info *info = this_cpu_ptr(&flush_tlb_info);
874
875#ifdef CONFIG_DEBUG_VM
876 /*
877 * Ensure that the following code is non-reentrant and flush_tlb_info
878 * is not overwritten. This means no TLB flushing is initiated by
879 * interrupt handlers and machine-check exception handlers.
880 */
881 BUG_ON(this_cpu_inc_return(flush_tlb_info_idx) != 1);
882#endif
883
884 info->start = start;
885 info->end = end;
886 info->mm = mm;
887 info->stride_shift = stride_shift;
888 info->freed_tables = freed_tables;
889 info->new_tlb_gen = new_tlb_gen;
890
891 return info;
892}
893
894static inline void put_flush_tlb_info(void)
895{
896#ifdef CONFIG_DEBUG_VM
897 /* Complete reentrency prevention checks */
898 barrier();
899 this_cpu_dec(flush_tlb_info_idx);
900#endif
901}
902
903void flush_tlb_mm_range(struct mm_struct *mm, unsigned long start,
904 unsigned long end, unsigned int stride_shift,
905 bool freed_tables)
906{
907 struct flush_tlb_info *info;
908 u64 new_tlb_gen;
909 int cpu;
910
911 cpu = get_cpu();
912
913 /* Should we flush just the requested range? */
914 if ((end == TLB_FLUSH_ALL) ||
915 ((end - start) >> stride_shift) > tlb_single_page_flush_ceiling) {
916 start = 0;
917 end = TLB_FLUSH_ALL;
918 }
919
920 /* This is also a barrier that synchronizes with switch_mm(). */
921 new_tlb_gen = inc_mm_tlb_gen(mm);
922
923 info = get_flush_tlb_info(mm, start, end, stride_shift, freed_tables,
924 new_tlb_gen);
925
926 if (mm == this_cpu_read(cpu_tlbstate.loaded_mm)) {
927 lockdep_assert_irqs_enabled();
928 local_irq_disable();
929 flush_tlb_func_local(info, TLB_LOCAL_MM_SHOOTDOWN);
930 local_irq_enable();
931 }
932
933 if (cpumask_any_but(mm_cpumask(mm), cpu) < nr_cpu_ids)
934 flush_tlb_others(mm_cpumask(mm), info);
935
936 put_flush_tlb_info();
937 put_cpu();
938}
939
940
941static void do_flush_tlb_all(void *info)
942{
943 count_vm_tlb_event(NR_TLB_REMOTE_FLUSH_RECEIVED);
944 __flush_tlb_all();
945}
946
947void flush_tlb_all(void)
948{
949 count_vm_tlb_event(NR_TLB_REMOTE_FLUSH);
950 on_each_cpu(do_flush_tlb_all, NULL, 1);
951}
952
953static void do_kernel_range_flush(void *info)
954{
955 struct flush_tlb_info *f = info;
956 unsigned long addr;
957
958 /* flush range by one by one 'invlpg' */
959 for (addr = f->start; addr < f->end; addr += PAGE_SIZE)
960 flush_tlb_one_kernel(addr);
961}
962
963void flush_tlb_kernel_range(unsigned long start, unsigned long end)
964{
965 /* Balance as user space task's flush, a bit conservative */
966 if (end == TLB_FLUSH_ALL ||
967 (end - start) > tlb_single_page_flush_ceiling << PAGE_SHIFT) {
968 on_each_cpu(do_flush_tlb_all, NULL, 1);
969 } else {
970 struct flush_tlb_info *info;
971
972 preempt_disable();
973 info = get_flush_tlb_info(NULL, start, end, 0, false, 0);
974
975 on_each_cpu(do_kernel_range_flush, info, 1);
976
977 put_flush_tlb_info();
978 preempt_enable();
979 }
980}
981
982/*
983 * This can be used from process context to figure out what the value of
984 * CR3 is without needing to do a (slow) __read_cr3().
985 *
986 * It's intended to be used for code like KVM that sneakily changes CR3
987 * and needs to restore it. It needs to be used very carefully.
988 */
989unsigned long __get_current_cr3_fast(void)
990{
991 unsigned long cr3 = build_cr3(this_cpu_read(cpu_tlbstate.loaded_mm)->pgd,
992 this_cpu_read(cpu_tlbstate.loaded_mm_asid));
993
994 /* For now, be very restrictive about when this can be called. */
995 VM_WARN_ON(in_nmi() || preemptible());
996
997 VM_BUG_ON(cr3 != __read_cr3());
998 return cr3;
999}
1000EXPORT_SYMBOL_GPL(__get_current_cr3_fast);
1001
1002/*
1003 * Flush one page in the kernel mapping
1004 */
1005void flush_tlb_one_kernel(unsigned long addr)
1006{
1007 count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ONE);
1008
1009 /*
1010 * If PTI is off, then __flush_tlb_one_user() is just INVLPG or its
1011 * paravirt equivalent. Even with PCID, this is sufficient: we only
1012 * use PCID if we also use global PTEs for the kernel mapping, and
1013 * INVLPG flushes global translations across all address spaces.
1014 *
1015 * If PTI is on, then the kernel is mapped with non-global PTEs, and
1016 * __flush_tlb_one_user() will flush the given address for the current
1017 * kernel address space and for its usermode counterpart, but it does
1018 * not flush it for other address spaces.
1019 */
1020 flush_tlb_one_user(addr);
1021
1022 if (!static_cpu_has(X86_FEATURE_PTI))
1023 return;
1024
1025 /*
1026 * See above. We need to propagate the flush to all other address
1027 * spaces. In principle, we only need to propagate it to kernelmode
1028 * address spaces, but the extra bookkeeping we would need is not
1029 * worth it.
1030 */
1031 this_cpu_write(cpu_tlbstate.invalidate_other, true);
1032}
1033
1034/*
1035 * Flush one page in the user mapping
1036 */
1037STATIC_NOPV void native_flush_tlb_one_user(unsigned long addr)
1038{
1039 u32 loaded_mm_asid = this_cpu_read(cpu_tlbstate.loaded_mm_asid);
1040
1041 asm volatile("invlpg (%0)" ::"r" (addr) : "memory");
1042
1043 if (!static_cpu_has(X86_FEATURE_PTI))
1044 return;
1045
1046 /*
1047 * Some platforms #GP if we call invpcid(type=1/2) before CR4.PCIDE=1.
1048 * Just use invalidate_user_asid() in case we are called early.
1049 */
1050 if (!this_cpu_has(X86_FEATURE_INVPCID_SINGLE))
1051 invalidate_user_asid(loaded_mm_asid);
1052 else
1053 invpcid_flush_one(user_pcid(loaded_mm_asid), addr);
1054}
1055
1056void flush_tlb_one_user(unsigned long addr)
1057{
1058 __flush_tlb_one_user(addr);
1059}
1060
1061/*
1062 * Flush everything
1063 */
1064STATIC_NOPV void native_flush_tlb_global(void)
1065{
1066 unsigned long cr4, flags;
1067
1068 if (static_cpu_has(X86_FEATURE_INVPCID)) {
1069 /*
1070 * Using INVPCID is considerably faster than a pair of writes
1071 * to CR4 sandwiched inside an IRQ flag save/restore.
1072 *
1073 * Note, this works with CR4.PCIDE=0 or 1.
1074 */
1075 invpcid_flush_all();
1076 return;
1077 }
1078
1079 /*
1080 * Read-modify-write to CR4 - protect it from preemption and
1081 * from interrupts. (Use the raw variant because this code can
1082 * be called from deep inside debugging code.)
1083 */
1084 raw_local_irq_save(flags);
1085
1086 cr4 = this_cpu_read(cpu_tlbstate.cr4);
1087 /* toggle PGE */
1088 native_write_cr4(cr4 ^ X86_CR4_PGE);
1089 /* write old PGE again and flush TLBs */
1090 native_write_cr4(cr4);
1091
1092 raw_local_irq_restore(flags);
1093}
1094
1095/*
1096 * Flush the entire current user mapping
1097 */
1098STATIC_NOPV void native_flush_tlb_local(void)
1099{
1100 /*
1101 * Preemption or interrupts must be disabled to protect the access
1102 * to the per CPU variable and to prevent being preempted between
1103 * read_cr3() and write_cr3().
1104 */
1105 WARN_ON_ONCE(preemptible());
1106
1107 invalidate_user_asid(this_cpu_read(cpu_tlbstate.loaded_mm_asid));
1108
1109 /* If current->mm == NULL then the read_cr3() "borrows" an mm */
1110 native_write_cr3(__native_read_cr3());
1111}
1112
1113void flush_tlb_local(void)
1114{
1115 __flush_tlb_local();
1116}
1117
1118/*
1119 * Flush everything
1120 */
1121void __flush_tlb_all(void)
1122{
1123 /*
1124 * This is to catch users with enabled preemption and the PGE feature
1125 * and don't trigger the warning in __native_flush_tlb().
1126 */
1127 VM_WARN_ON_ONCE(preemptible());
1128
1129 if (boot_cpu_has(X86_FEATURE_PGE)) {
1130 __flush_tlb_global();
1131 } else {
1132 /*
1133 * !PGE -> !PCID (setup_pcid()), thus every flush is total.
1134 */
1135 flush_tlb_local();
1136 }
1137}
1138EXPORT_SYMBOL_GPL(__flush_tlb_all);
1139
1140/*
1141 * arch_tlbbatch_flush() performs a full TLB flush regardless of the active mm.
1142 * This means that the 'struct flush_tlb_info' that describes which mappings to
1143 * flush is actually fixed. We therefore set a single fixed struct and use it in
1144 * arch_tlbbatch_flush().
1145 */
1146static const struct flush_tlb_info full_flush_tlb_info = {
1147 .mm = NULL,
1148 .start = 0,
1149 .end = TLB_FLUSH_ALL,
1150};
1151
1152void arch_tlbbatch_flush(struct arch_tlbflush_unmap_batch *batch)
1153{
1154 int cpu = get_cpu();
1155
1156 if (cpumask_test_cpu(cpu, &batch->cpumask)) {
1157 lockdep_assert_irqs_enabled();
1158 local_irq_disable();
1159 flush_tlb_func_local(&full_flush_tlb_info, TLB_LOCAL_SHOOTDOWN);
1160 local_irq_enable();
1161 }
1162
1163 if (cpumask_any_but(&batch->cpumask, cpu) < nr_cpu_ids)
1164 flush_tlb_others(&batch->cpumask, &full_flush_tlb_info);
1165
1166 cpumask_clear(&batch->cpumask);
1167
1168 put_cpu();
1169}
1170
1171/*
1172 * Blindly accessing user memory from NMI context can be dangerous
1173 * if we're in the middle of switching the current user task or
1174 * switching the loaded mm. It can also be dangerous if we
1175 * interrupted some kernel code that was temporarily using a
1176 * different mm.
1177 */
1178bool nmi_uaccess_okay(void)
1179{
1180 struct mm_struct *loaded_mm = this_cpu_read(cpu_tlbstate.loaded_mm);
1181 struct mm_struct *current_mm = current->mm;
1182
1183 VM_WARN_ON_ONCE(!loaded_mm);
1184
1185 /*
1186 * The condition we want to check is
1187 * current_mm->pgd == __va(read_cr3_pa()). This may be slow, though,
1188 * if we're running in a VM with shadow paging, and nmi_uaccess_okay()
1189 * is supposed to be reasonably fast.
1190 *
1191 * Instead, we check the almost equivalent but somewhat conservative
1192 * condition below, and we rely on the fact that switch_mm_irqs_off()
1193 * sets loaded_mm to LOADED_MM_SWITCHING before writing to CR3.
1194 */
1195 if (loaded_mm != current_mm)
1196 return false;
1197
1198 VM_WARN_ON_ONCE(current_mm->pgd != __va(read_cr3_pa()));
1199
1200 return true;
1201}
1202
1203static ssize_t tlbflush_read_file(struct file *file, char __user *user_buf,
1204 size_t count, loff_t *ppos)
1205{
1206 char buf[32];
1207 unsigned int len;
1208
1209 len = sprintf(buf, "%ld\n", tlb_single_page_flush_ceiling);
1210 return simple_read_from_buffer(user_buf, count, ppos, buf, len);
1211}
1212
1213static ssize_t tlbflush_write_file(struct file *file,
1214 const char __user *user_buf, size_t count, loff_t *ppos)
1215{
1216 char buf[32];
1217 ssize_t len;
1218 int ceiling;
1219
1220 len = min(count, sizeof(buf) - 1);
1221 if (copy_from_user(buf, user_buf, len))
1222 return -EFAULT;
1223
1224 buf[len] = '\0';
1225 if (kstrtoint(buf, 0, &ceiling))
1226 return -EINVAL;
1227
1228 if (ceiling < 0)
1229 return -EINVAL;
1230
1231 tlb_single_page_flush_ceiling = ceiling;
1232 return count;
1233}
1234
1235static const struct file_operations fops_tlbflush = {
1236 .read = tlbflush_read_file,
1237 .write = tlbflush_write_file,
1238 .llseek = default_llseek,
1239};
1240
1241static int __init create_tlb_single_page_flush_ceiling(void)
1242{
1243 debugfs_create_file("tlb_single_page_flush_ceiling", S_IRUSR | S_IWUSR,
1244 arch_debugfs_dir, NULL, &fops_tlbflush);
1245 return 0;
1246}
1247late_initcall(create_tlb_single_page_flush_ceiling);
1#include <linux/init.h>
2
3#include <linux/mm.h>
4#include <linux/spinlock.h>
5#include <linux/smp.h>
6#include <linux/interrupt.h>
7#include <linux/module.h>
8#include <linux/cpu.h>
9
10#include <asm/tlbflush.h>
11#include <asm/mmu_context.h>
12#include <asm/cache.h>
13#include <asm/apic.h>
14#include <asm/uv/uv.h>
15#include <linux/debugfs.h>
16
17/*
18 * Smarter SMP flushing macros.
19 * c/o Linus Torvalds.
20 *
21 * These mean you can really definitely utterly forget about
22 * writing to user space from interrupts. (Its not allowed anyway).
23 *
24 * Optimizations Manfred Spraul <manfred@colorfullife.com>
25 *
26 * More scalable flush, from Andi Kleen
27 *
28 * Implement flush IPI by CALL_FUNCTION_VECTOR, Alex Shi
29 */
30
31struct flush_tlb_info {
32 struct mm_struct *flush_mm;
33 unsigned long flush_start;
34 unsigned long flush_end;
35};
36
37/*
38 * We cannot call mmdrop() because we are in interrupt context,
39 * instead update mm->cpu_vm_mask.
40 */
41void leave_mm(int cpu)
42{
43 struct mm_struct *active_mm = this_cpu_read(cpu_tlbstate.active_mm);
44 if (this_cpu_read(cpu_tlbstate.state) == TLBSTATE_OK)
45 BUG();
46 if (cpumask_test_cpu(cpu, mm_cpumask(active_mm))) {
47 cpumask_clear_cpu(cpu, mm_cpumask(active_mm));
48 load_cr3(swapper_pg_dir);
49 /*
50 * This gets called in the idle path where RCU
51 * functions differently. Tracing normally
52 * uses RCU, so we have to call the tracepoint
53 * specially here.
54 */
55 trace_tlb_flush_rcuidle(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL);
56 }
57}
58EXPORT_SYMBOL_GPL(leave_mm);
59
60/*
61 * The flush IPI assumes that a thread switch happens in this order:
62 * [cpu0: the cpu that switches]
63 * 1) switch_mm() either 1a) or 1b)
64 * 1a) thread switch to a different mm
65 * 1a1) set cpu_tlbstate to TLBSTATE_OK
66 * Now the tlb flush NMI handler flush_tlb_func won't call leave_mm
67 * if cpu0 was in lazy tlb mode.
68 * 1a2) update cpu active_mm
69 * Now cpu0 accepts tlb flushes for the new mm.
70 * 1a3) cpu_set(cpu, new_mm->cpu_vm_mask);
71 * Now the other cpus will send tlb flush ipis.
72 * 1a4) change cr3.
73 * 1a5) cpu_clear(cpu, old_mm->cpu_vm_mask);
74 * Stop ipi delivery for the old mm. This is not synchronized with
75 * the other cpus, but flush_tlb_func ignore flush ipis for the wrong
76 * mm, and in the worst case we perform a superfluous tlb flush.
77 * 1b) thread switch without mm change
78 * cpu active_mm is correct, cpu0 already handles flush ipis.
79 * 1b1) set cpu_tlbstate to TLBSTATE_OK
80 * 1b2) test_and_set the cpu bit in cpu_vm_mask.
81 * Atomically set the bit [other cpus will start sending flush ipis],
82 * and test the bit.
83 * 1b3) if the bit was 0: leave_mm was called, flush the tlb.
84 * 2) switch %%esp, ie current
85 *
86 * The interrupt must handle 2 special cases:
87 * - cr3 is changed before %%esp, ie. it cannot use current->{active_,}mm.
88 * - the cpu performs speculative tlb reads, i.e. even if the cpu only
89 * runs in kernel space, the cpu could load tlb entries for user space
90 * pages.
91 *
92 * The good news is that cpu_tlbstate is local to each cpu, no
93 * write/read ordering problems.
94 */
95
96/*
97 * TLB flush funcation:
98 * 1) Flush the tlb entries if the cpu uses the mm that's being flushed.
99 * 2) Leave the mm if we are in the lazy tlb mode.
100 */
101static void flush_tlb_func(void *info)
102{
103 struct flush_tlb_info *f = info;
104
105 inc_irq_stat(irq_tlb_count);
106
107 if (f->flush_mm && f->flush_mm != this_cpu_read(cpu_tlbstate.active_mm))
108 return;
109
110 count_vm_tlb_event(NR_TLB_REMOTE_FLUSH_RECEIVED);
111 if (this_cpu_read(cpu_tlbstate.state) == TLBSTATE_OK) {
112 if (f->flush_end == TLB_FLUSH_ALL) {
113 local_flush_tlb();
114 trace_tlb_flush(TLB_REMOTE_SHOOTDOWN, TLB_FLUSH_ALL);
115 } else {
116 unsigned long addr;
117 unsigned long nr_pages =
118 (f->flush_end - f->flush_start) / PAGE_SIZE;
119 addr = f->flush_start;
120 while (addr < f->flush_end) {
121 __flush_tlb_single(addr);
122 addr += PAGE_SIZE;
123 }
124 trace_tlb_flush(TLB_REMOTE_SHOOTDOWN, nr_pages);
125 }
126 } else
127 leave_mm(smp_processor_id());
128
129}
130
131void native_flush_tlb_others(const struct cpumask *cpumask,
132 struct mm_struct *mm, unsigned long start,
133 unsigned long end)
134{
135 struct flush_tlb_info info;
136
137 if (end == 0)
138 end = start + PAGE_SIZE;
139 info.flush_mm = mm;
140 info.flush_start = start;
141 info.flush_end = end;
142
143 count_vm_tlb_event(NR_TLB_REMOTE_FLUSH);
144 if (end == TLB_FLUSH_ALL)
145 trace_tlb_flush(TLB_REMOTE_SEND_IPI, TLB_FLUSH_ALL);
146 else
147 trace_tlb_flush(TLB_REMOTE_SEND_IPI,
148 (end - start) >> PAGE_SHIFT);
149
150 if (is_uv_system()) {
151 unsigned int cpu;
152
153 cpu = smp_processor_id();
154 cpumask = uv_flush_tlb_others(cpumask, mm, start, end, cpu);
155 if (cpumask)
156 smp_call_function_many(cpumask, flush_tlb_func,
157 &info, 1);
158 return;
159 }
160 smp_call_function_many(cpumask, flush_tlb_func, &info, 1);
161}
162
163void flush_tlb_current_task(void)
164{
165 struct mm_struct *mm = current->mm;
166
167 preempt_disable();
168
169 count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL);
170
171 /* This is an implicit full barrier that synchronizes with switch_mm. */
172 local_flush_tlb();
173
174 trace_tlb_flush(TLB_LOCAL_SHOOTDOWN, TLB_FLUSH_ALL);
175 if (cpumask_any_but(mm_cpumask(mm), smp_processor_id()) < nr_cpu_ids)
176 flush_tlb_others(mm_cpumask(mm), mm, 0UL, TLB_FLUSH_ALL);
177 preempt_enable();
178}
179
180/*
181 * See Documentation/x86/tlb.txt for details. We choose 33
182 * because it is large enough to cover the vast majority (at
183 * least 95%) of allocations, and is small enough that we are
184 * confident it will not cause too much overhead. Each single
185 * flush is about 100 ns, so this caps the maximum overhead at
186 * _about_ 3,000 ns.
187 *
188 * This is in units of pages.
189 */
190static unsigned long tlb_single_page_flush_ceiling __read_mostly = 33;
191
192void flush_tlb_mm_range(struct mm_struct *mm, unsigned long start,
193 unsigned long end, unsigned long vmflag)
194{
195 unsigned long addr;
196 /* do a global flush by default */
197 unsigned long base_pages_to_flush = TLB_FLUSH_ALL;
198
199 preempt_disable();
200 if (current->active_mm != mm) {
201 /* Synchronize with switch_mm. */
202 smp_mb();
203
204 goto out;
205 }
206
207 if (!current->mm) {
208 leave_mm(smp_processor_id());
209
210 /* Synchronize with switch_mm. */
211 smp_mb();
212
213 goto out;
214 }
215
216 if ((end != TLB_FLUSH_ALL) && !(vmflag & VM_HUGETLB))
217 base_pages_to_flush = (end - start) >> PAGE_SHIFT;
218
219 /*
220 * Both branches below are implicit full barriers (MOV to CR or
221 * INVLPG) that synchronize with switch_mm.
222 */
223 if (base_pages_to_flush > tlb_single_page_flush_ceiling) {
224 base_pages_to_flush = TLB_FLUSH_ALL;
225 count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL);
226 local_flush_tlb();
227 } else {
228 /* flush range by one by one 'invlpg' */
229 for (addr = start; addr < end; addr += PAGE_SIZE) {
230 count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ONE);
231 __flush_tlb_single(addr);
232 }
233 }
234 trace_tlb_flush(TLB_LOCAL_MM_SHOOTDOWN, base_pages_to_flush);
235out:
236 if (base_pages_to_flush == TLB_FLUSH_ALL) {
237 start = 0UL;
238 end = TLB_FLUSH_ALL;
239 }
240 if (cpumask_any_but(mm_cpumask(mm), smp_processor_id()) < nr_cpu_ids)
241 flush_tlb_others(mm_cpumask(mm), mm, start, end);
242 preempt_enable();
243}
244
245void flush_tlb_page(struct vm_area_struct *vma, unsigned long start)
246{
247 struct mm_struct *mm = vma->vm_mm;
248
249 preempt_disable();
250
251 if (current->active_mm == mm) {
252 if (current->mm) {
253 /*
254 * Implicit full barrier (INVLPG) that synchronizes
255 * with switch_mm.
256 */
257 __flush_tlb_one(start);
258 } else {
259 leave_mm(smp_processor_id());
260
261 /* Synchronize with switch_mm. */
262 smp_mb();
263 }
264 }
265
266 if (cpumask_any_but(mm_cpumask(mm), smp_processor_id()) < nr_cpu_ids)
267 flush_tlb_others(mm_cpumask(mm), mm, start, 0UL);
268
269 preempt_enable();
270}
271
272static void do_flush_tlb_all(void *info)
273{
274 count_vm_tlb_event(NR_TLB_REMOTE_FLUSH_RECEIVED);
275 __flush_tlb_all();
276 if (this_cpu_read(cpu_tlbstate.state) == TLBSTATE_LAZY)
277 leave_mm(smp_processor_id());
278}
279
280void flush_tlb_all(void)
281{
282 count_vm_tlb_event(NR_TLB_REMOTE_FLUSH);
283 on_each_cpu(do_flush_tlb_all, NULL, 1);
284}
285
286static void do_kernel_range_flush(void *info)
287{
288 struct flush_tlb_info *f = info;
289 unsigned long addr;
290
291 /* flush range by one by one 'invlpg' */
292 for (addr = f->flush_start; addr < f->flush_end; addr += PAGE_SIZE)
293 __flush_tlb_single(addr);
294}
295
296void flush_tlb_kernel_range(unsigned long start, unsigned long end)
297{
298
299 /* Balance as user space task's flush, a bit conservative */
300 if (end == TLB_FLUSH_ALL ||
301 (end - start) > tlb_single_page_flush_ceiling * PAGE_SIZE) {
302 on_each_cpu(do_flush_tlb_all, NULL, 1);
303 } else {
304 struct flush_tlb_info info;
305 info.flush_start = start;
306 info.flush_end = end;
307 on_each_cpu(do_kernel_range_flush, &info, 1);
308 }
309}
310
311static ssize_t tlbflush_read_file(struct file *file, char __user *user_buf,
312 size_t count, loff_t *ppos)
313{
314 char buf[32];
315 unsigned int len;
316
317 len = sprintf(buf, "%ld\n", tlb_single_page_flush_ceiling);
318 return simple_read_from_buffer(user_buf, count, ppos, buf, len);
319}
320
321static ssize_t tlbflush_write_file(struct file *file,
322 const char __user *user_buf, size_t count, loff_t *ppos)
323{
324 char buf[32];
325 ssize_t len;
326 int ceiling;
327
328 len = min(count, sizeof(buf) - 1);
329 if (copy_from_user(buf, user_buf, len))
330 return -EFAULT;
331
332 buf[len] = '\0';
333 if (kstrtoint(buf, 0, &ceiling))
334 return -EINVAL;
335
336 if (ceiling < 0)
337 return -EINVAL;
338
339 tlb_single_page_flush_ceiling = ceiling;
340 return count;
341}
342
343static const struct file_operations fops_tlbflush = {
344 .read = tlbflush_read_file,
345 .write = tlbflush_write_file,
346 .llseek = default_llseek,
347};
348
349static int __init create_tlb_single_page_flush_ceiling(void)
350{
351 debugfs_create_file("tlb_single_page_flush_ceiling", S_IRUSR | S_IWUSR,
352 arch_debugfs_dir, NULL, &fops_tlbflush);
353 return 0;
354}
355late_initcall(create_tlb_single_page_flush_ceiling);