Loading...
1# SPDX-License-Identifier: GPL-2.0
2# Backward compatibility
3asflags-y += $(EXTRA_AFLAGS)
4ccflags-y += $(EXTRA_CFLAGS)
5cppflags-y += $(EXTRA_CPPFLAGS)
6ldflags-y += $(EXTRA_LDFLAGS)
7ifneq ($(always),)
8$(warning 'always' is deprecated. Please use 'always-y' instead)
9always-y += $(always)
10endif
11ifneq ($(hostprogs-y),)
12$(warning 'hostprogs-y' is deprecated. Please use 'hostprogs' instead)
13hostprogs += $(hostprogs-y)
14endif
15ifneq ($(hostprogs-m),)
16$(warning 'hostprogs-m' is deprecated. Please use 'hostprogs' instead)
17hostprogs += $(hostprogs-m)
18endif
19
20# flags that take effect in current and sub directories
21KBUILD_AFLAGS += $(subdir-asflags-y)
22KBUILD_CFLAGS += $(subdir-ccflags-y)
23
24# Figure out what we need to build from the various variables
25# ===========================================================================
26
27# When an object is listed to be built compiled-in and modular,
28# only build the compiled-in version
29obj-m := $(filter-out $(obj-y),$(obj-m))
30
31# Libraries are always collected in one lib file.
32# Filter out objects already built-in
33lib-y := $(filter-out $(obj-y), $(sort $(lib-y) $(lib-m)))
34
35# Subdirectories we need to descend into
36subdir-ym := $(sort $(subdir-y) $(subdir-m) \
37 $(patsubst %/,%, $(filter %/, $(obj-y) $(obj-m))))
38
39# Handle objects in subdirs:
40# - If we encounter foo in $(obj-y), replace it by foo/built-in.a and
41# foo/modules.order
42# - If we encounter foo/ in $(obj-m), replace it by foo/modules.order
43#
44# Generate modules.order to determine modorder. Unfortunately, we don't have
45# information about ordering between -y and -m subdirs. Just put -y's first.
46
47ifdef need-modorder
48obj-m := $(patsubst %/,%/modules.order, $(filter %/, $(obj-y)) $(obj-m))
49else
50obj-m := $(filter-out %/, $(obj-m))
51endif
52
53ifdef need-builtin
54obj-y := $(patsubst %/, %/built-in.a, $(obj-y))
55else
56obj-y := $(filter-out %/, $(obj-y))
57endif
58
59# If $(foo-objs), $(foo-y), $(foo-m), or $(foo-) exists, foo.o is a composite object
60multi-used-y := $(sort $(foreach m,$(obj-y), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-))), $(m))))
61multi-used-m := $(sort $(foreach m,$(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-m)) $($(m:.o=-))), $(m))))
62multi-used := $(multi-used-y) $(multi-used-m)
63
64# Replace multi-part objects by their individual parts,
65# including built-in.a from subdirectories
66real-obj-y := $(foreach m, $(obj-y), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m)))
67real-obj-m := $(foreach m, $(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-m)) $($(m:.o=-))),$($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-m)),$(m)))
68
69always-y += $(always-m)
70
71# hostprogs-always-y += foo
72# ... is a shorthand for
73# hostprogs += foo
74# always-y += foo
75hostprogs += $(hostprogs-always-y) $(hostprogs-always-m)
76always-y += $(hostprogs-always-y) $(hostprogs-always-m)
77
78# userprogs-always-y is likewise.
79userprogs += $(userprogs-always-y) $(userprogs-always-m)
80always-y += $(userprogs-always-y) $(userprogs-always-m)
81
82# DTB
83# If CONFIG_OF_ALL_DTBS is enabled, all DT blobs are built
84extra-y += $(dtb-y)
85extra-$(CONFIG_OF_ALL_DTBS) += $(dtb-)
86
87ifneq ($(CHECK_DTBS),)
88extra-y += $(patsubst %.dtb,%.dt.yaml, $(dtb-y))
89extra-$(CONFIG_OF_ALL_DTBS) += $(patsubst %.dtb,%.dt.yaml, $(dtb-))
90endif
91
92# Add subdir path
93
94extra-y := $(addprefix $(obj)/,$(extra-y))
95always-y := $(addprefix $(obj)/,$(always-y))
96targets := $(addprefix $(obj)/,$(targets))
97obj-m := $(addprefix $(obj)/,$(obj-m))
98lib-y := $(addprefix $(obj)/,$(lib-y))
99real-obj-y := $(addprefix $(obj)/,$(real-obj-y))
100real-obj-m := $(addprefix $(obj)/,$(real-obj-m))
101multi-used-m := $(addprefix $(obj)/,$(multi-used-m))
102subdir-ym := $(addprefix $(obj)/,$(subdir-ym))
103
104# Finds the multi-part object the current object will be linked into.
105# If the object belongs to two or more multi-part objects, list them all.
106modname-multi = $(sort $(foreach m,$(multi-used),\
107 $(if $(filter $*.o, $($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-m))),$(m:.o=))))
108
109__modname = $(if $(modname-multi),$(modname-multi),$(basetarget))
110
111modname = $(subst $(space),:,$(__modname))
112modfile = $(addprefix $(obj)/,$(__modname))
113
114# target with $(obj)/ and its suffix stripped
115target-stem = $(basename $(patsubst $(obj)/%,%,$@))
116
117# These flags are needed for modversions and compiling, so we define them here
118# $(modname_flags) defines KBUILD_MODNAME as the name of the module it will
119# end up in (or would, if it gets compiled in)
120name-fix = $(call stringify,$(subst $(comma),_,$(subst -,_,$1)))
121basename_flags = -DKBUILD_BASENAME=$(call name-fix,$(basetarget))
122modname_flags = -DKBUILD_MODNAME=$(call name-fix,$(modname))
123modfile_flags = -DKBUILD_MODFILE=$(call stringify,$(modfile))
124
125_c_flags = $(filter-out $(CFLAGS_REMOVE_$(target-stem).o), \
126 $(filter-out $(ccflags-remove-y), \
127 $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(ccflags-y)) \
128 $(CFLAGS_$(target-stem).o))
129_a_flags = $(filter-out $(AFLAGS_REMOVE_$(target-stem).o), \
130 $(filter-out $(asflags-remove-y), \
131 $(KBUILD_CPPFLAGS) $(KBUILD_AFLAGS) $(asflags-y)) \
132 $(AFLAGS_$(target-stem).o))
133_cpp_flags = $(KBUILD_CPPFLAGS) $(cppflags-y) $(CPPFLAGS_$(target-stem).lds)
134
135#
136# Enable gcov profiling flags for a file, directory or for all files depending
137# on variables GCOV_PROFILE_obj.o, GCOV_PROFILE and CONFIG_GCOV_PROFILE_ALL
138# (in this order)
139#
140ifeq ($(CONFIG_GCOV_KERNEL),y)
141_c_flags += $(if $(patsubst n%,, \
142 $(GCOV_PROFILE_$(basetarget).o)$(GCOV_PROFILE)$(CONFIG_GCOV_PROFILE_ALL)), \
143 $(CFLAGS_GCOV))
144endif
145
146#
147# Enable address sanitizer flags for kernel except some files or directories
148# we don't want to check (depends on variables KASAN_SANITIZE_obj.o, KASAN_SANITIZE)
149#
150ifeq ($(CONFIG_KASAN),y)
151_c_flags += $(if $(patsubst n%,, \
152 $(KASAN_SANITIZE_$(basetarget).o)$(KASAN_SANITIZE)y), \
153 $(CFLAGS_KASAN), $(CFLAGS_KASAN_NOSANITIZE))
154endif
155
156ifeq ($(CONFIG_UBSAN),y)
157_c_flags += $(if $(patsubst n%,, \
158 $(UBSAN_SANITIZE_$(basetarget).o)$(UBSAN_SANITIZE)$(CONFIG_UBSAN_SANITIZE_ALL)), \
159 $(CFLAGS_UBSAN))
160endif
161
162ifeq ($(CONFIG_KCOV),y)
163_c_flags += $(if $(patsubst n%,, \
164 $(KCOV_INSTRUMENT_$(basetarget).o)$(KCOV_INSTRUMENT)$(CONFIG_KCOV_INSTRUMENT_ALL)), \
165 $(CFLAGS_KCOV))
166endif
167
168#
169# Enable KCSAN flags except some files or directories we don't want to check
170# (depends on variables KCSAN_SANITIZE_obj.o, KCSAN_SANITIZE)
171#
172ifeq ($(CONFIG_KCSAN),y)
173_c_flags += $(if $(patsubst n%,, \
174 $(KCSAN_SANITIZE_$(basetarget).o)$(KCSAN_SANITIZE)y), \
175 $(CFLAGS_KCSAN))
176endif
177
178# $(srctree)/$(src) for including checkin headers from generated source files
179# $(objtree)/$(obj) for including generated headers from checkin source files
180ifeq ($(KBUILD_EXTMOD),)
181ifdef building_out_of_srctree
182_c_flags += -I $(srctree)/$(src) -I $(objtree)/$(obj)
183_a_flags += -I $(srctree)/$(src) -I $(objtree)/$(obj)
184_cpp_flags += -I $(srctree)/$(src) -I $(objtree)/$(obj)
185endif
186endif
187
188part-of-module = $(if $(filter $(basename $@).o, $(real-obj-m)),y)
189quiet_modtag = $(if $(part-of-module),[M], )
190
191modkern_cflags = \
192 $(if $(part-of-module), \
193 $(KBUILD_CFLAGS_MODULE) $(CFLAGS_MODULE), \
194 $(KBUILD_CFLAGS_KERNEL) $(CFLAGS_KERNEL) $(modfile_flags))
195
196modkern_aflags = $(if $(part-of-module), \
197 $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE), \
198 $(KBUILD_AFLAGS_KERNEL) $(AFLAGS_KERNEL))
199
200c_flags = -Wp,-MMD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \
201 -include $(srctree)/include/linux/compiler_types.h \
202 $(_c_flags) $(modkern_cflags) \
203 $(basename_flags) $(modname_flags)
204
205a_flags = -Wp,-MMD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \
206 $(_a_flags) $(modkern_aflags)
207
208cpp_flags = -Wp,-MMD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \
209 $(_cpp_flags)
210
211ld_flags = $(KBUILD_LDFLAGS) $(ldflags-y) $(LDFLAGS_$(@F))
212
213DTC_INCLUDE := $(srctree)/scripts/dtc/include-prefixes
214
215dtc_cpp_flags = -Wp,-MMD,$(depfile).pre.tmp -nostdinc \
216 $(addprefix -I,$(DTC_INCLUDE)) \
217 -undef -D__DTS__
218
219# Useful for describing the dependency of composite objects
220# Usage:
221# $(call multi_depend, multi_used_targets, suffix_to_remove, suffix_to_add)
222define multi_depend
223$(foreach m, $(notdir $1), \
224 $(eval $(obj)/$m: \
225 $(addprefix $(obj)/, $(foreach s, $3, $($(m:%$(strip $2)=%$(s)))))))
226endef
227
228quiet_cmd_copy = COPY $@
229 cmd_copy = cp $< $@
230
231# Shipped files
232# ===========================================================================
233
234quiet_cmd_shipped = SHIPPED $@
235cmd_shipped = cat $< > $@
236
237$(obj)/%: $(src)/%_shipped
238 $(call cmd,shipped)
239
240# Commands useful for building a boot image
241# ===========================================================================
242#
243# Use as following:
244#
245# target: source(s) FORCE
246# $(if_changed,ld/objcopy/gzip)
247#
248# and add target to extra-y so that we know we have to
249# read in the saved command line
250
251# Linking
252# ---------------------------------------------------------------------------
253
254quiet_cmd_ld = LD $@
255 cmd_ld = $(LD) $(ld_flags) $(real-prereqs) -o $@
256
257# Archive
258# ---------------------------------------------------------------------------
259
260quiet_cmd_ar = AR $@
261 cmd_ar = rm -f $@; $(AR) cDPrsT $@ $(real-prereqs)
262
263# Objcopy
264# ---------------------------------------------------------------------------
265
266quiet_cmd_objcopy = OBJCOPY $@
267cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
268
269# Gzip
270# ---------------------------------------------------------------------------
271
272quiet_cmd_gzip = GZIP $@
273 cmd_gzip = cat $(real-prereqs) | $(KGZIP) -n -f -9 > $@
274
275# DTC
276# ---------------------------------------------------------------------------
277DTC ?= $(objtree)/scripts/dtc/dtc
278DTC_FLAGS += -Wno-interrupt_provider
279
280# Disable noisy checks by default
281ifeq ($(findstring 1,$(KBUILD_EXTRA_WARN)),)
282DTC_FLAGS += -Wno-unit_address_vs_reg \
283 -Wno-unit_address_format \
284 -Wno-avoid_unnecessary_addr_size \
285 -Wno-alias_paths \
286 -Wno-graph_child_address \
287 -Wno-simple_bus_reg \
288 -Wno-unique_unit_address \
289 -Wno-pci_device_reg
290endif
291
292ifneq ($(findstring 2,$(KBUILD_EXTRA_WARN)),)
293DTC_FLAGS += -Wnode_name_chars_strict \
294 -Wproperty_name_chars_strict \
295 -Winterrupt_provider
296endif
297
298DTC_FLAGS += $(DTC_FLAGS_$(basetarget))
299
300# Generate an assembly file to wrap the output of the device tree compiler
301quiet_cmd_dt_S_dtb= DTB $@
302cmd_dt_S_dtb= \
303{ \
304 echo '\#include <asm-generic/vmlinux.lds.h>'; \
305 echo '.section .dtb.init.rodata,"a"'; \
306 echo '.balign STRUCT_ALIGNMENT'; \
307 echo '.global __dtb_$(subst -,_,$(*F))_begin'; \
308 echo '__dtb_$(subst -,_,$(*F))_begin:'; \
309 echo '.incbin "$<" '; \
310 echo '__dtb_$(subst -,_,$(*F))_end:'; \
311 echo '.global __dtb_$(subst -,_,$(*F))_end'; \
312 echo '.balign STRUCT_ALIGNMENT'; \
313} > $@
314
315$(obj)/%.dtb.S: $(obj)/%.dtb FORCE
316 $(call if_changed,dt_S_dtb)
317
318quiet_cmd_dtc = DTC $@
319cmd_dtc = $(HOSTCC) -E $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \
320 $(DTC) -O $(patsubst .%,%,$(suffix $@)) -o $@ -b 0 \
321 $(addprefix -i,$(dir $<) $(DTC_INCLUDE)) $(DTC_FLAGS) \
322 -d $(depfile).dtc.tmp $(dtc-tmp) ; \
323 cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile)
324
325$(obj)/%.dtb: $(src)/%.dts $(DTC) FORCE
326 $(call if_changed_dep,dtc)
327
328DT_CHECKER ?= dt-validate
329DT_BINDING_DIR := Documentation/devicetree/bindings
330# DT_TMP_SCHEMA may be overridden from Documentation/devicetree/bindings/Makefile
331DT_TMP_SCHEMA ?= $(objtree)/$(DT_BINDING_DIR)/processed-schema.yaml
332
333quiet_cmd_dtb_check = CHECK $@
334 cmd_dtb_check = $(DT_CHECKER) -u $(srctree)/$(DT_BINDING_DIR) -p $(DT_TMP_SCHEMA) $@
335
336define rule_dtc
337 $(call cmd_and_fixdep,dtc)
338 $(call cmd,dtb_check)
339endef
340
341$(obj)/%.dt.yaml: $(src)/%.dts $(DTC) $(DT_TMP_SCHEMA) FORCE
342 $(call if_changed_rule,dtc,yaml)
343
344dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp)
345
346# Bzip2
347# ---------------------------------------------------------------------------
348
349# Bzip2 and LZMA do not include size in file... so we have to fake that;
350# append the size as a 32-bit littleendian number as gzip does.
351size_append = printf $(shell \
352dec_size=0; \
353for F in $(real-prereqs); do \
354 fsize=$$($(CONFIG_SHELL) $(srctree)/scripts/file-size.sh $$F); \
355 dec_size=$$(expr $$dec_size + $$fsize); \
356done; \
357printf "%08x\n" $$dec_size | \
358 sed 's/\(..\)/\1 /g' | { \
359 read ch0 ch1 ch2 ch3; \
360 for ch in $$ch3 $$ch2 $$ch1 $$ch0; do \
361 printf '%s%03o' '\\' $$((0x$$ch)); \
362 done; \
363 } \
364)
365
366quiet_cmd_bzip2 = BZIP2 $@
367 cmd_bzip2 = { cat $(real-prereqs) | $(KBZIP2) -9; $(size_append); } > $@
368
369# Lzma
370# ---------------------------------------------------------------------------
371
372quiet_cmd_lzma = LZMA $@
373 cmd_lzma = { cat $(real-prereqs) | $(LZMA) -9; $(size_append); } > $@
374
375quiet_cmd_lzo = LZO $@
376 cmd_lzo = { cat $(real-prereqs) | $(KLZOP) -9; $(size_append); } > $@
377
378quiet_cmd_lz4 = LZ4 $@
379 cmd_lz4 = { cat $(real-prereqs) | $(LZ4) -l -c1 stdin stdout; \
380 $(size_append); } > $@
381
382# U-Boot mkimage
383# ---------------------------------------------------------------------------
384
385MKIMAGE := $(srctree)/scripts/mkuboot.sh
386
387# SRCARCH just happens to match slightly more than ARCH (on sparc), so reduces
388# the number of overrides in arch makefiles
389UIMAGE_ARCH ?= $(SRCARCH)
390UIMAGE_COMPRESSION ?= $(if $(2),$(2),none)
391UIMAGE_OPTS-y ?=
392UIMAGE_TYPE ?= kernel
393UIMAGE_LOADADDR ?= arch_must_set_this
394UIMAGE_ENTRYADDR ?= $(UIMAGE_LOADADDR)
395UIMAGE_NAME ?= 'Linux-$(KERNELRELEASE)'
396
397quiet_cmd_uimage = UIMAGE $@
398 cmd_uimage = $(BASH) $(MKIMAGE) -A $(UIMAGE_ARCH) -O linux \
399 -C $(UIMAGE_COMPRESSION) $(UIMAGE_OPTS-y) \
400 -T $(UIMAGE_TYPE) \
401 -a $(UIMAGE_LOADADDR) -e $(UIMAGE_ENTRYADDR) \
402 -n $(UIMAGE_NAME) -d $< $@
403
404# XZ
405# ---------------------------------------------------------------------------
406# Use xzkern to compress the kernel image and xzmisc to compress other things.
407#
408# xzkern uses a big LZMA2 dictionary since it doesn't increase memory usage
409# of the kernel decompressor. A BCJ filter is used if it is available for
410# the target architecture. xzkern also appends uncompressed size of the data
411# using size_append. The .xz format has the size information available at
412# the end of the file too, but it's in more complex format and it's good to
413# avoid changing the part of the boot code that reads the uncompressed size.
414# Note that the bytes added by size_append will make the xz tool think that
415# the file is corrupt. This is expected.
416#
417# xzmisc doesn't use size_append, so it can be used to create normal .xz
418# files. xzmisc uses smaller LZMA2 dictionary than xzkern, because a very
419# big dictionary would increase the memory usage too much in the multi-call
420# decompression mode. A BCJ filter isn't used either.
421quiet_cmd_xzkern = XZKERN $@
422 cmd_xzkern = { cat $(real-prereqs) | sh $(srctree)/scripts/xz_wrap.sh; \
423 $(size_append); } > $@
424
425quiet_cmd_xzmisc = XZMISC $@
426 cmd_xzmisc = cat $(real-prereqs) | $(XZ) --check=crc32 --lzma2=dict=1MiB > $@
427
428# ZSTD
429# ---------------------------------------------------------------------------
430# Appends the uncompressed size of the data using size_append. The .zst
431# format has the size information available at the beginning of the file too,
432# but it's in a more complex format and it's good to avoid changing the part
433# of the boot code that reads the uncompressed size.
434#
435# Note that the bytes added by size_append will make the zstd tool think that
436# the file is corrupt. This is expected.
437#
438# zstd uses a maximum window size of 8 MB. zstd22 uses a maximum window size of
439# 128 MB. zstd22 is used for kernel compression because it is decompressed in a
440# single pass, so zstd doesn't need to allocate a window buffer. When streaming
441# decompression is used, like initramfs decompression, zstd22 should likely not
442# be used because it would require zstd to allocate a 128 MB buffer.
443
444quiet_cmd_zstd = ZSTD $@
445 cmd_zstd = { cat $(real-prereqs) | $(ZSTD) -19; $(size_append); } > $@
446
447quiet_cmd_zstd22 = ZSTD22 $@
448 cmd_zstd22 = { cat $(real-prereqs) | $(ZSTD) -22 --ultra; $(size_append); } > $@
449
450# ASM offsets
451# ---------------------------------------------------------------------------
452
453# Default sed regexp - multiline due to syntax constraints
454#
455# Use [:space:] because LLVM's integrated assembler inserts <tab> around
456# the .ascii directive whereas GCC keeps the <space> as-is.
457define sed-offsets
458 's:^[[:space:]]*\.ascii[[:space:]]*"\(.*\)".*:\1:; \
459 /^->/{s:->#\(.*\):/* \1 */:; \
460 s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; \
461 s:->::; p;}'
462endef
463
464# Use filechk to avoid rebuilds when a header changes, but the resulting file
465# does not
466define filechk_offsets
467 echo "#ifndef $2"; \
468 echo "#define $2"; \
469 echo "/*"; \
470 echo " * DO NOT MODIFY."; \
471 echo " *"; \
472 echo " * This file was generated by Kbuild"; \
473 echo " */"; \
474 echo ""; \
475 sed -ne $(sed-offsets) < $<; \
476 echo ""; \
477 echo "#endif"
478endef
1# SPDX-License-Identifier: GPL-2.0
2# Backward compatibility
3asflags-y += $(EXTRA_AFLAGS)
4ccflags-y += $(EXTRA_CFLAGS)
5cppflags-y += $(EXTRA_CPPFLAGS)
6ldflags-y += $(EXTRA_LDFLAGS)
7
8# flags that take effect in current and sub directories
9KBUILD_AFLAGS += $(subdir-asflags-y)
10KBUILD_CFLAGS += $(subdir-ccflags-y)
11
12# Figure out what we need to build from the various variables
13# ===========================================================================
14
15# When an object is listed to be built compiled-in and modular,
16# only build the compiled-in version
17obj-m := $(filter-out $(obj-y),$(obj-m))
18
19# Libraries are always collected in one lib file.
20# Filter out objects already built-in
21lib-y := $(filter-out $(obj-y), $(sort $(lib-y) $(lib-m)))
22
23# Determine modorder.
24# Unfortunately, we don't have information about ordering between -y
25# and -m subdirs. Just put -y's first.
26modorder := $(patsubst %/,%/modules.order, $(filter %/, $(obj-y)) $(obj-m:.o=.ko))
27
28# Handle objects in subdirs
29# ---------------------------------------------------------------------------
30# o if we encounter foo in $(obj-y), replace it by foo/built-in.a
31# and add the directory to the list of dirs to descend into: $(subdir-y)
32# o if we encounter foo/ in $(obj-m), remove it from $(obj-m)
33# and add the directory to the list of dirs to descend into: $(subdir-m)
34__subdir-y := $(patsubst %/,%,$(filter %/, $(obj-y)))
35subdir-y += $(__subdir-y)
36__subdir-m := $(patsubst %/,%,$(filter %/, $(obj-m)))
37subdir-m += $(__subdir-m)
38obj-y := $(patsubst %/, %/built-in.a, $(obj-y))
39obj-m := $(filter-out %/, $(obj-m))
40
41# Subdirectories we need to descend into
42subdir-ym := $(sort $(subdir-y) $(subdir-m))
43
44# if $(foo-objs), $(foo-y), or $(foo-m) exists, foo.o is a composite object
45multi-used-y := $(sort $(foreach m,$(obj-y), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m))))
46multi-used-m := $(sort $(foreach m,$(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-m))), $(m))))
47multi-used := $(multi-used-y) $(multi-used-m)
48single-used-m := $(sort $(filter-out $(multi-used-m),$(obj-m)))
49
50# $(subdir-obj-y) is the list of objects in $(obj-y) which uses dir/ to
51# tell kbuild to descend
52subdir-obj-y := $(filter %/built-in.a, $(obj-y))
53
54# Replace multi-part objects by their individual parts,
55# including built-in.a from subdirectories
56real-obj-y := $(foreach m, $(obj-y), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m)))
57real-obj-m := $(foreach m, $(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-m))),$($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-m)),$(m)))
58
59# DTB
60# If CONFIG_OF_ALL_DTBS is enabled, all DT blobs are built
61extra-y += $(dtb-y)
62extra-$(CONFIG_OF_ALL_DTBS) += $(dtb-)
63
64# Add subdir path
65
66extra-y := $(addprefix $(obj)/,$(extra-y))
67always := $(addprefix $(obj)/,$(always))
68targets := $(addprefix $(obj)/,$(targets))
69modorder := $(addprefix $(obj)/,$(modorder))
70obj-m := $(addprefix $(obj)/,$(obj-m))
71lib-y := $(addprefix $(obj)/,$(lib-y))
72subdir-obj-y := $(addprefix $(obj)/,$(subdir-obj-y))
73real-obj-y := $(addprefix $(obj)/,$(real-obj-y))
74real-obj-m := $(addprefix $(obj)/,$(real-obj-m))
75single-used-m := $(addprefix $(obj)/,$(single-used-m))
76multi-used-m := $(addprefix $(obj)/,$(multi-used-m))
77subdir-ym := $(addprefix $(obj)/,$(subdir-ym))
78
79# Finds the multi-part object the current object will be linked into.
80# If the object belongs to two or more multi-part objects, all of them are
81# concatenated with a colon separator.
82modname-multi = $(subst $(space),:,$(sort $(foreach m,$(multi-used),\
83 $(if $(filter $*.o, $($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-m))),$(m:.o=)))))
84
85modname = $(if $(modname-multi),$(modname-multi),$(basetarget))
86
87# These flags are needed for modversions and compiling, so we define them here
88# $(modname_flags) defines KBUILD_MODNAME as the name of the module it will
89# end up in (or would, if it gets compiled in)
90name-fix = $(squote)$(quote)$(subst $(comma),_,$(subst -,_,$1))$(quote)$(squote)
91basename_flags = -DKBUILD_BASENAME=$(call name-fix,$(basetarget))
92modname_flags = -DKBUILD_MODNAME=$(call name-fix,$(modname))
93
94orig_c_flags = $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) \
95 $(ccflags-y) $(CFLAGS_$(basetarget).o)
96_c_flags = $(filter-out $(CFLAGS_REMOVE_$(basetarget).o), $(orig_c_flags))
97orig_a_flags = $(KBUILD_CPPFLAGS) $(KBUILD_AFLAGS) \
98 $(asflags-y) $(AFLAGS_$(basetarget).o)
99_a_flags = $(filter-out $(AFLAGS_REMOVE_$(basetarget).o), $(orig_a_flags))
100_cpp_flags = $(KBUILD_CPPFLAGS) $(cppflags-y) $(CPPFLAGS_$(@F))
101
102#
103# Enable gcov profiling flags for a file, directory or for all files depending
104# on variables GCOV_PROFILE_obj.o, GCOV_PROFILE and CONFIG_GCOV_PROFILE_ALL
105# (in this order)
106#
107ifeq ($(CONFIG_GCOV_KERNEL),y)
108_c_flags += $(if $(patsubst n%,, \
109 $(GCOV_PROFILE_$(basetarget).o)$(GCOV_PROFILE)$(CONFIG_GCOV_PROFILE_ALL)), \
110 $(CFLAGS_GCOV))
111endif
112
113#
114# Enable address sanitizer flags for kernel except some files or directories
115# we don't want to check (depends on variables KASAN_SANITIZE_obj.o, KASAN_SANITIZE)
116#
117ifeq ($(CONFIG_KASAN),y)
118_c_flags += $(if $(patsubst n%,, \
119 $(KASAN_SANITIZE_$(basetarget).o)$(KASAN_SANITIZE)y), \
120 $(CFLAGS_KASAN), $(CFLAGS_KASAN_NOSANITIZE))
121endif
122
123ifeq ($(CONFIG_UBSAN),y)
124_c_flags += $(if $(patsubst n%,, \
125 $(UBSAN_SANITIZE_$(basetarget).o)$(UBSAN_SANITIZE)$(CONFIG_UBSAN_SANITIZE_ALL)), \
126 $(CFLAGS_UBSAN))
127endif
128
129ifeq ($(CONFIG_KCOV),y)
130_c_flags += $(if $(patsubst n%,, \
131 $(KCOV_INSTRUMENT_$(basetarget).o)$(KCOV_INSTRUMENT)$(CONFIG_KCOV_INSTRUMENT_ALL)), \
132 $(CFLAGS_KCOV))
133endif
134
135# If building the kernel in a separate objtree expand all occurrences
136# of -Idir to -I$(srctree)/dir except for absolute paths (starting with '/').
137
138ifeq ($(KBUILD_SRC),)
139__c_flags = $(_c_flags)
140__a_flags = $(_a_flags)
141__cpp_flags = $(_cpp_flags)
142else
143
144# -I$(obj) locates generated .h files
145# $(call addtree,-I$(obj)) locates .h files in srctree, from generated .c files
146# and locates generated .h files
147# FIXME: Replace both with specific CFLAGS* statements in the makefiles
148__c_flags = $(if $(obj),$(call addtree,-I$(src)) -I$(obj)) \
149 $(call flags,_c_flags)
150__a_flags = $(call flags,_a_flags)
151__cpp_flags = $(call flags,_cpp_flags)
152endif
153
154c_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \
155 -include $(srctree)/include/linux/compiler_types.h \
156 $(__c_flags) $(modkern_cflags) \
157 $(basename_flags) $(modname_flags)
158
159a_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \
160 $(__a_flags) $(modkern_aflags)
161
162cpp_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \
163 $(__cpp_flags)
164
165ld_flags = $(LDFLAGS) $(ldflags-y)
166
167DTC_INCLUDE := $(srctree)/scripts/dtc/include-prefixes
168
169dtc_cpp_flags = -Wp,-MD,$(depfile).pre.tmp -nostdinc \
170 $(addprefix -I,$(DTC_INCLUDE)) \
171 -undef -D__DTS__
172
173# Useful for describing the dependency of composite objects
174# Usage:
175# $(call multi_depend, multi_used_targets, suffix_to_remove, suffix_to_add)
176define multi_depend
177$(foreach m, $(notdir $1), \
178 $(eval $(obj)/$m: \
179 $(addprefix $(obj)/, $(foreach s, $3, $($(m:%$(strip $2)=%$(s)))))))
180endef
181
182# LEX
183# ---------------------------------------------------------------------------
184quiet_cmd_flex = LEX $@
185 cmd_flex = $(LEX) -o$@ -L $<
186
187$(obj)/%.lex.c: $(src)/%.l FORCE
188 $(call if_changed,flex)
189
190# YACC
191# ---------------------------------------------------------------------------
192quiet_cmd_bison = YACC $@
193 cmd_bison = $(YACC) -o$@ -t -l $<
194
195$(obj)/%.tab.c: $(src)/%.y FORCE
196 $(call if_changed,bison)
197
198quiet_cmd_bison_h = YACC $@
199 cmd_bison_h = $(YACC) -o/dev/null --defines=$@ -t -l $<
200
201$(obj)/%.tab.h: $(src)/%.y FORCE
202 $(call if_changed,bison_h)
203
204# Shipped files
205# ===========================================================================
206
207quiet_cmd_shipped = SHIPPED $@
208cmd_shipped = cat $< > $@
209
210$(obj)/%: $(src)/%_shipped
211 $(call cmd,shipped)
212
213# Commands useful for building a boot image
214# ===========================================================================
215#
216# Use as following:
217#
218# target: source(s) FORCE
219# $(if_changed,ld/objcopy/gzip)
220#
221# and add target to extra-y so that we know we have to
222# read in the saved command line
223
224# Linking
225# ---------------------------------------------------------------------------
226
227quiet_cmd_ld = LD $@
228cmd_ld = $(LD) $(LDFLAGS) $(ldflags-y) $(LDFLAGS_$(@F)) \
229 $(filter-out FORCE,$^) -o $@
230
231# Objcopy
232# ---------------------------------------------------------------------------
233
234quiet_cmd_objcopy = OBJCOPY $@
235cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
236
237# Gzip
238# ---------------------------------------------------------------------------
239
240quiet_cmd_gzip = GZIP $@
241cmd_gzip = (cat $(filter-out FORCE,$^) | gzip -n -f -9 > $@) || \
242 (rm -f $@ ; false)
243
244# DTC
245# ---------------------------------------------------------------------------
246DTC ?= $(objtree)/scripts/dtc/dtc
247
248# Disable noisy checks by default
249ifeq ($(findstring 1,$(KBUILD_ENABLE_EXTRA_GCC_CHECKS)),)
250DTC_FLAGS += -Wno-unit_address_vs_reg \
251 -Wno-unit_address_format \
252 -Wno-avoid_unnecessary_addr_size \
253 -Wno-alias_paths \
254 -Wno-pci_device_reg
255endif
256
257ifneq ($(findstring 2,$(KBUILD_ENABLE_EXTRA_GCC_CHECKS)),)
258DTC_FLAGS += -Wnode_name_chars_strict \
259 -Wproperty_name_chars_strict
260endif
261
262DTC_FLAGS += $(DTC_FLAGS_$(basetarget))
263
264# Generate an assembly file to wrap the output of the device tree compiler
265quiet_cmd_dt_S_dtb= DTB $@
266cmd_dt_S_dtb= \
267( \
268 echo '\#include <asm-generic/vmlinux.lds.h>'; \
269 echo '.section .dtb.init.rodata,"a"'; \
270 echo '.balign STRUCT_ALIGNMENT'; \
271 echo '.global __dtb_$(subst -,_,$(*F))_begin'; \
272 echo '__dtb_$(subst -,_,$(*F))_begin:'; \
273 echo '.incbin "$<" '; \
274 echo '__dtb_$(subst -,_,$(*F))_end:'; \
275 echo '.global __dtb_$(subst -,_,$(*F))_end'; \
276 echo '.balign STRUCT_ALIGNMENT'; \
277) > $@
278
279$(obj)/%.dtb.S: $(obj)/%.dtb FORCE
280 $(call if_changed,dt_S_dtb)
281
282quiet_cmd_dtc = DTC $@
283cmd_dtc = mkdir -p $(dir ${dtc-tmp}) ; \
284 $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \
285 $(DTC) -O dtb -o $@ -b 0 \
286 $(addprefix -i,$(dir $<) $(DTC_INCLUDE)) $(DTC_FLAGS) \
287 -d $(depfile).dtc.tmp $(dtc-tmp) ; \
288 cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile)
289
290$(obj)/%.dtb: $(src)/%.dts $(DTC) FORCE
291 $(call if_changed_dep,dtc)
292
293dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp)
294
295# Bzip2
296# ---------------------------------------------------------------------------
297
298# Bzip2 and LZMA do not include size in file... so we have to fake that;
299# append the size as a 32-bit littleendian number as gzip does.
300size_append = printf $(shell \
301dec_size=0; \
302for F in $1; do \
303 fsize=$$($(CONFIG_SHELL) $(srctree)/scripts/file-size.sh $$F); \
304 dec_size=$$(expr $$dec_size + $$fsize); \
305done; \
306printf "%08x\n" $$dec_size | \
307 sed 's/\(..\)/\1 /g' | { \
308 read ch0 ch1 ch2 ch3; \
309 for ch in $$ch3 $$ch2 $$ch1 $$ch0; do \
310 printf '%s%03o' '\\' $$((0x$$ch)); \
311 done; \
312 } \
313)
314
315quiet_cmd_bzip2 = BZIP2 $@
316cmd_bzip2 = (cat $(filter-out FORCE,$^) | \
317 bzip2 -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
318 (rm -f $@ ; false)
319
320# Lzma
321# ---------------------------------------------------------------------------
322
323quiet_cmd_lzma = LZMA $@
324cmd_lzma = (cat $(filter-out FORCE,$^) | \
325 lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
326 (rm -f $@ ; false)
327
328quiet_cmd_lzo = LZO $@
329cmd_lzo = (cat $(filter-out FORCE,$^) | \
330 lzop -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
331 (rm -f $@ ; false)
332
333quiet_cmd_lz4 = LZ4 $@
334cmd_lz4 = (cat $(filter-out FORCE,$^) | \
335 lz4c -l -c1 stdin stdout && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
336 (rm -f $@ ; false)
337
338# U-Boot mkimage
339# ---------------------------------------------------------------------------
340
341MKIMAGE := $(srctree)/scripts/mkuboot.sh
342
343# SRCARCH just happens to match slightly more than ARCH (on sparc), so reduces
344# the number of overrides in arch makefiles
345UIMAGE_ARCH ?= $(SRCARCH)
346UIMAGE_COMPRESSION ?= $(if $(2),$(2),none)
347UIMAGE_OPTS-y ?=
348UIMAGE_TYPE ?= kernel
349UIMAGE_LOADADDR ?= arch_must_set_this
350UIMAGE_ENTRYADDR ?= $(UIMAGE_LOADADDR)
351UIMAGE_NAME ?= 'Linux-$(KERNELRELEASE)'
352UIMAGE_IN ?= $<
353UIMAGE_OUT ?= $@
354
355quiet_cmd_uimage = UIMAGE $(UIMAGE_OUT)
356 cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A $(UIMAGE_ARCH) -O linux \
357 -C $(UIMAGE_COMPRESSION) $(UIMAGE_OPTS-y) \
358 -T $(UIMAGE_TYPE) \
359 -a $(UIMAGE_LOADADDR) -e $(UIMAGE_ENTRYADDR) \
360 -n $(UIMAGE_NAME) -d $(UIMAGE_IN) $(UIMAGE_OUT)
361
362# XZ
363# ---------------------------------------------------------------------------
364# Use xzkern to compress the kernel image and xzmisc to compress other things.
365#
366# xzkern uses a big LZMA2 dictionary since it doesn't increase memory usage
367# of the kernel decompressor. A BCJ filter is used if it is available for
368# the target architecture. xzkern also appends uncompressed size of the data
369# using size_append. The .xz format has the size information available at
370# the end of the file too, but it's in more complex format and it's good to
371# avoid changing the part of the boot code that reads the uncompressed size.
372# Note that the bytes added by size_append will make the xz tool think that
373# the file is corrupt. This is expected.
374#
375# xzmisc doesn't use size_append, so it can be used to create normal .xz
376# files. xzmisc uses smaller LZMA2 dictionary than xzkern, because a very
377# big dictionary would increase the memory usage too much in the multi-call
378# decompression mode. A BCJ filter isn't used either.
379quiet_cmd_xzkern = XZKERN $@
380cmd_xzkern = (cat $(filter-out FORCE,$^) | \
381 sh $(srctree)/scripts/xz_wrap.sh && \
382 $(call size_append, $(filter-out FORCE,$^))) > $@ || \
383 (rm -f $@ ; false)
384
385quiet_cmd_xzmisc = XZMISC $@
386cmd_xzmisc = (cat $(filter-out FORCE,$^) | \
387 xz --check=crc32 --lzma2=dict=1MiB) > $@ || \
388 (rm -f $@ ; false)
389
390# ASM offsets
391# ---------------------------------------------------------------------------
392
393# Default sed regexp - multiline due to syntax constraints
394#
395# Use [:space:] because LLVM's integrated assembler inserts <tab> around
396# the .ascii directive whereas GCC keeps the <space> as-is.
397define sed-offsets
398 's:^[[:space:]]*\.ascii[[:space:]]*"\(.*\)".*:\1:; \
399 /^->/{s:->#\(.*\):/* \1 */:; \
400 s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; \
401 s:->::; p;}'
402endef
403
404# Use filechk to avoid rebuilds when a header changes, but the resulting file
405# does not
406define filechk_offsets
407 (set -e; \
408 echo "#ifndef $2"; \
409 echo "#define $2"; \
410 echo "/*"; \
411 echo " * DO NOT MODIFY."; \
412 echo " *"; \
413 echo " * This file was generated by Kbuild"; \
414 echo " */"; \
415 echo ""; \
416 sed -ne $(sed-offsets); \
417 echo ""; \
418 echo "#endif" )
419endef