1// SPDX-License-Identifier: GPL-2.0-or-later
   2/*
   3 * Contains common pci routines for ALL ppc platform
   4 * (based on pci_32.c and pci_64.c)
   5 *
   6 * Port for PPC64 David Engebretsen, IBM Corp.
   7 * Contains common pci routines for ppc64 platform, pSeries and iSeries brands.
   8 *
   9 * Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM
  10 *   Rework, based on alpha PCI code.
  11 *
  12 * Common pmac/prep/chrp pci routines. -- Cort
 
 
 
 
 
  13 */
  14
  15#include <linux/kernel.h>
  16#include <linux/pci.h>
  17#include <linux/string.h>
  18#include <linux/init.h>
  19#include <linux/delay.h>
  20#include <linux/export.h>
  21#include <linux/of_address.h>
  22#include <linux/of_pci.h>
  23#include <linux/mm.h>
  24#include <linux/shmem_fs.h>
  25#include <linux/list.h>
  26#include <linux/syscalls.h>
  27#include <linux/irq.h>
  28#include <linux/vmalloc.h>
  29#include <linux/slab.h>
  30#include <linux/vgaarb.h>
  31#include <linux/numa.h>
  32
  33#include <asm/processor.h>
  34#include <asm/io.h>
  35#include <asm/prom.h>
  36#include <asm/pci-bridge.h>
  37#include <asm/byteorder.h>
  38#include <asm/machdep.h>
  39#include <asm/ppc-pci.h>
  40#include <asm/eeh.h>
  41
  42#include "../../../drivers/pci/pci.h"
  43
  44/* hose_spinlock protects accesses to the the phb_bitmap. */
  45static DEFINE_SPINLOCK(hose_spinlock);
  46LIST_HEAD(hose_list);
  47
  48/* For dynamic PHB numbering on get_phb_number(): max number of PHBs. */
  49#define MAX_PHBS 0x10000
  50
  51/*
  52 * For dynamic PHB numbering: used/free PHBs tracking bitmap.
  53 * Accesses to this bitmap should be protected by hose_spinlock.
  54 */
  55static DECLARE_BITMAP(phb_bitmap, MAX_PHBS);
  56
  57/* ISA Memory physical address */
  58resource_size_t isa_mem_base;
  59EXPORT_SYMBOL(isa_mem_base);
  60
  61
  62static const struct dma_map_ops *pci_dma_ops;
  63
  64void set_pci_dma_ops(const struct dma_map_ops *dma_ops)
  65{
  66	pci_dma_ops = dma_ops;
  67}
  68
  69/*
  70 * This function should run under locking protection, specifically
  71 * hose_spinlock.
  72 */
  73static int get_phb_number(struct device_node *dn)
  74{
  75	int ret, phb_id = -1;
  76	u32 prop_32;
  77	u64 prop;
  78
  79	/*
  80	 * Try fixed PHB numbering first, by checking archs and reading
  81	 * the respective device-tree properties. Firstly, try powernv by
  82	 * reading "ibm,opal-phbid", only present in OPAL environment.
  83	 */
  84	ret = of_property_read_u64(dn, "ibm,opal-phbid", &prop);
  85	if (ret) {
  86		ret = of_property_read_u32_index(dn, "reg", 1, &prop_32);
  87		prop = prop_32;
  88	}
  89
  90	if (!ret)
  91		phb_id = (int)(prop & (MAX_PHBS - 1));
  92
  93	/* We need to be sure to not use the same PHB number twice. */
  94	if ((phb_id >= 0) && !test_and_set_bit(phb_id, phb_bitmap))
  95		return phb_id;
  96
  97	/*
  98	 * If not pseries nor powernv, or if fixed PHB numbering tried to add
  99	 * the same PHB number twice, then fallback to dynamic PHB numbering.
 100	 */
 101	phb_id = find_first_zero_bit(phb_bitmap, MAX_PHBS);
 102	BUG_ON(phb_id >= MAX_PHBS);
 103	set_bit(phb_id, phb_bitmap);
 104
 105	return phb_id;
 106}
 
 107
 108struct pci_controller *pcibios_alloc_controller(struct device_node *dev)
 109{
 110	struct pci_controller *phb;
 111
 112	phb = zalloc_maybe_bootmem(sizeof(struct pci_controller), GFP_KERNEL);
 113	if (phb == NULL)
 114		return NULL;
 115	spin_lock(&hose_spinlock);
 116	phb->global_number = get_phb_number(dev);
 117	list_add_tail(&phb->list_node, &hose_list);
 118	spin_unlock(&hose_spinlock);
 119	phb->dn = dev;
 120	phb->is_dynamic = slab_is_available();
 121#ifdef CONFIG_PPC64
 122	if (dev) {
 123		int nid = of_node_to_nid(dev);
 124
 125		if (nid < 0 || !node_online(nid))
 126			nid = NUMA_NO_NODE;
 127
 128		PHB_SET_NODE(phb, nid);
 129	}
 130#endif
 131	return phb;
 132}
 133EXPORT_SYMBOL_GPL(pcibios_alloc_controller);
 134
 135void pcibios_free_controller(struct pci_controller *phb)
 136{
 137	spin_lock(&hose_spinlock);
 138
 139	/* Clear bit of phb_bitmap to allow reuse of this PHB number. */
 140	if (phb->global_number < MAX_PHBS)
 141		clear_bit(phb->global_number, phb_bitmap);
 142
 143	list_del(&phb->list_node);
 144	spin_unlock(&hose_spinlock);
 145
 146	if (phb->is_dynamic)
 147		kfree(phb);
 148}
 149EXPORT_SYMBOL_GPL(pcibios_free_controller);
 150
 151/*
 152 * This function is used to call pcibios_free_controller()
 153 * in a deferred manner: a callback from the PCI subsystem.
 154 *
 155 * _*DO NOT*_ call pcibios_free_controller() explicitly if
 156 * this is used (or it may access an invalid *phb pointer).
 157 *
 158 * The callback occurs when all references to the root bus
 159 * are dropped (e.g., child buses/devices and their users).
 160 *
 161 * It's called as .release_fn() of 'struct pci_host_bridge'
 162 * which is associated with the 'struct pci_controller.bus'
 163 * (root bus) - it expects .release_data to hold a pointer
 164 * to 'struct pci_controller'.
 165 *
 166 * In order to use it, register .release_fn()/release_data
 167 * like this:
 168 *
 169 * pci_set_host_bridge_release(bridge,
 170 *                             pcibios_free_controller_deferred
 171 *                             (void *) phb);
 172 *
 173 * e.g. in the pcibios_root_bridge_prepare() callback from
 174 * pci_create_root_bus().
 175 */
 176void pcibios_free_controller_deferred(struct pci_host_bridge *bridge)
 177{
 178	struct pci_controller *phb = (struct pci_controller *)
 179					 bridge->release_data;
 180
 181	pr_debug("domain %d, dynamic %d\n", phb->global_number, phb->is_dynamic);
 182
 183	pcibios_free_controller(phb);
 184}
 185EXPORT_SYMBOL_GPL(pcibios_free_controller_deferred);
 186
 187/*
 188 * The function is used to return the minimal alignment
 189 * for memory or I/O windows of the associated P2P bridge.
 190 * By default, 4KiB alignment for I/O windows and 1MiB for
 191 * memory windows.
 192 */
 193resource_size_t pcibios_window_alignment(struct pci_bus *bus,
 194					 unsigned long type)
 195{
 196	struct pci_controller *phb = pci_bus_to_host(bus);
 197
 198	if (phb->controller_ops.window_alignment)
 199		return phb->controller_ops.window_alignment(bus, type);
 200
 201	/*
 202	 * PCI core will figure out the default
 203	 * alignment: 4KiB for I/O and 1MiB for
 204	 * memory window.
 205	 */
 206	return 1;
 207}
 208
 209void pcibios_setup_bridge(struct pci_bus *bus, unsigned long type)
 210{
 211	struct pci_controller *hose = pci_bus_to_host(bus);
 212
 213	if (hose->controller_ops.setup_bridge)
 214		hose->controller_ops.setup_bridge(bus, type);
 215}
 216
 217void pcibios_reset_secondary_bus(struct pci_dev *dev)
 218{
 219	struct pci_controller *phb = pci_bus_to_host(dev->bus);
 220
 221	if (phb->controller_ops.reset_secondary_bus) {
 222		phb->controller_ops.reset_secondary_bus(dev);
 223		return;
 224	}
 225
 226	pci_reset_secondary_bus(dev);
 227}
 228
 229resource_size_t pcibios_default_alignment(void)
 230{
 231	if (ppc_md.pcibios_default_alignment)
 232		return ppc_md.pcibios_default_alignment();
 233
 234	return 0;
 235}
 236
 237#ifdef CONFIG_PCI_IOV
 238resource_size_t pcibios_iov_resource_alignment(struct pci_dev *pdev, int resno)
 239{
 240	if (ppc_md.pcibios_iov_resource_alignment)
 241		return ppc_md.pcibios_iov_resource_alignment(pdev, resno);
 242
 243	return pci_iov_resource_size(pdev, resno);
 244}
 245
 246int pcibios_sriov_enable(struct pci_dev *pdev, u16 num_vfs)
 247{
 248	if (ppc_md.pcibios_sriov_enable)
 249		return ppc_md.pcibios_sriov_enable(pdev, num_vfs);
 250
 251	return 0;
 252}
 253
 254int pcibios_sriov_disable(struct pci_dev *pdev)
 255{
 256	if (ppc_md.pcibios_sriov_disable)
 257		return ppc_md.pcibios_sriov_disable(pdev);
 258
 259	return 0;
 260}
 261
 262#endif /* CONFIG_PCI_IOV */
 263
 264static resource_size_t pcibios_io_size(const struct pci_controller *hose)
 265{
 266#ifdef CONFIG_PPC64
 267	return hose->pci_io_size;
 268#else
 269	return resource_size(&hose->io_resource);
 270#endif
 271}
 272
 273int pcibios_vaddr_is_ioport(void __iomem *address)
 274{
 275	int ret = 0;
 276	struct pci_controller *hose;
 277	resource_size_t size;
 278
 279	spin_lock(&hose_spinlock);
 280	list_for_each_entry(hose, &hose_list, list_node) {
 281		size = pcibios_io_size(hose);
 282		if (address >= hose->io_base_virt &&
 283		    address < (hose->io_base_virt + size)) {
 284			ret = 1;
 285			break;
 286		}
 287	}
 288	spin_unlock(&hose_spinlock);
 289	return ret;
 290}
 291
 292unsigned long pci_address_to_pio(phys_addr_t address)
 293{
 294	struct pci_controller *hose;
 295	resource_size_t size;
 296	unsigned long ret = ~0;
 297
 298	spin_lock(&hose_spinlock);
 299	list_for_each_entry(hose, &hose_list, list_node) {
 300		size = pcibios_io_size(hose);
 301		if (address >= hose->io_base_phys &&
 302		    address < (hose->io_base_phys + size)) {
 303			unsigned long base =
 304				(unsigned long)hose->io_base_virt - _IO_BASE;
 305			ret = base + (address - hose->io_base_phys);
 306			break;
 307		}
 308	}
 309	spin_unlock(&hose_spinlock);
 310
 311	return ret;
 312}
 313EXPORT_SYMBOL_GPL(pci_address_to_pio);
 314
 315/*
 316 * Return the domain number for this bus.
 317 */
 318int pci_domain_nr(struct pci_bus *bus)
 319{
 320	struct pci_controller *hose = pci_bus_to_host(bus);
 321
 322	return hose->global_number;
 323}
 324EXPORT_SYMBOL(pci_domain_nr);
 325
 326/* This routine is meant to be used early during boot, when the
 327 * PCI bus numbers have not yet been assigned, and you need to
 328 * issue PCI config cycles to an OF device.
 329 * It could also be used to "fix" RTAS config cycles if you want
 330 * to set pci_assign_all_buses to 1 and still use RTAS for PCI
 331 * config cycles.
 332 */
 333struct pci_controller* pci_find_hose_for_OF_device(struct device_node* node)
 334{
 335	while(node) {
 336		struct pci_controller *hose, *tmp;
 337		list_for_each_entry_safe(hose, tmp, &hose_list, list_node)
 338			if (hose->dn == node)
 339				return hose;
 340		node = node->parent;
 341	}
 342	return NULL;
 343}
 344
 345struct pci_controller *pci_find_controller_for_domain(int domain_nr)
 
 346{
 347	struct pci_controller *hose;
 
 348
 349	list_for_each_entry(hose, &hose_list, list_node)
 350		if (hose->global_number == domain_nr)
 351			return hose;
 
 
 
 
 352
 353	return NULL;
 
 
 
 
 
 
 
 
 354}
 355
 356/*
 357 * Reads the interrupt pin to determine if interrupt is use by card.
 358 * If the interrupt is used, then gets the interrupt line from the
 359 * openfirmware and sets it in the pci_dev and pci_config line.
 360 */
 361static int pci_read_irq_line(struct pci_dev *pci_dev)
 362{
 363	int virq;
 
 364
 365	pr_debug("PCI: Try to map irq for %s...\n", pci_name(pci_dev));
 366
 
 
 
 367	/* Try to get a mapping from the device-tree */
 368	virq = of_irq_parse_and_map_pci(pci_dev, 0, 0);
 369	if (virq <= 0) {
 370		u8 line, pin;
 371
 372		/* If that fails, lets fallback to what is in the config
 373		 * space and map that through the default controller. We
 374		 * also set the type to level low since that's what PCI
 375		 * interrupts are. If your platform does differently, then
 376		 * either provide a proper interrupt tree or don't use this
 377		 * function.
 378		 */
 379		if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_PIN, &pin))
 380			return -1;
 381		if (pin == 0)
 382			return -1;
 383		if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_LINE, &line) ||
 384		    line == 0xff || line == 0) {
 385			return -1;
 386		}
 387		pr_debug(" No map ! Using line %d (pin %d) from PCI config\n",
 388			 line, pin);
 389
 390		virq = irq_create_mapping(NULL, line);
 391		if (virq)
 392			irq_set_irq_type(virq, IRQ_TYPE_LEVEL_LOW);
 393	}
 
 
 
 
 394
 395	if (!virq) {
 
 
 
 396		pr_debug(" Failed to map !\n");
 397		return -1;
 398	}
 399
 400	pr_debug(" Mapped to linux irq %d\n", virq);
 401
 402	pci_dev->irq = virq;
 403
 404	return 0;
 405}
 406
 407/*
 408 * Platform support for /proc/bus/pci/X/Y mmap()s.
 
 409 *  -- paulus.
 410 */
 411int pci_iobar_pfn(struct pci_dev *pdev, int bar, struct vm_area_struct *vma)
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 412{
 413	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
 414	resource_size_t ioaddr = pci_resource_start(pdev, bar);
 
 415
 416	if (!hose)
 417		return -EINVAL;
 418
 419	/* Convert to an offset within this PCI controller */
 420	ioaddr -= (unsigned long)hose->io_base_virt - _IO_BASE;
 
 
 
 
 
 
 
 
 
 421
 422	vma->vm_pgoff += (ioaddr + hose->io_base_phys) >> PAGE_SHIFT;
 423	return 0;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 424}
 425
 426/*
 427 * This one is used by /dev/mem and fbdev who have no clue about the
 428 * PCI device, it tries to find the PCI device first and calls the
 429 * above routine
 430 */
 431pgprot_t pci_phys_mem_access_prot(struct file *file,
 432				  unsigned long pfn,
 433				  unsigned long size,
 434				  pgprot_t prot)
 435{
 436	struct pci_dev *pdev = NULL;
 437	struct resource *found = NULL;
 438	resource_size_t offset = ((resource_size_t)pfn) << PAGE_SHIFT;
 439	int i;
 440
 441	if (page_is_ram(pfn))
 442		return prot;
 443
 444	prot = pgprot_noncached(prot);
 445	for_each_pci_dev(pdev) {
 446		for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
 447			struct resource *rp = &pdev->resource[i];
 448			int flags = rp->flags;
 449
 450			/* Active and same type? */
 451			if ((flags & IORESOURCE_MEM) == 0)
 452				continue;
 453			/* In the range of this resource? */
 454			if (offset < (rp->start & PAGE_MASK) ||
 455			    offset > rp->end)
 456				continue;
 457			found = rp;
 458			break;
 459		}
 460		if (found)
 461			break;
 462	}
 463	if (found) {
 464		if (found->flags & IORESOURCE_PREFETCH)
 465			prot = pgprot_noncached_wc(prot);
 466		pci_dev_put(pdev);
 467	}
 468
 469	pr_debug("PCI: Non-PCI map for %llx, prot: %lx\n",
 470		 (unsigned long long)offset, pgprot_val(prot));
 471
 472	return prot;
 473}
 474
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 475/* This provides legacy IO read access on a bus */
 476int pci_legacy_read(struct pci_bus *bus, loff_t port, u32 *val, size_t size)
 477{
 478	unsigned long offset;
 479	struct pci_controller *hose = pci_bus_to_host(bus);
 480	struct resource *rp = &hose->io_resource;
 481	void __iomem *addr;
 482
 483	/* Check if port can be supported by that bus. We only check
 484	 * the ranges of the PHB though, not the bus itself as the rules
 485	 * for forwarding legacy cycles down bridges are not our problem
 486	 * here. So if the host bridge supports it, we do it.
 487	 */
 488	offset = (unsigned long)hose->io_base_virt - _IO_BASE;
 489	offset += port;
 490
 491	if (!(rp->flags & IORESOURCE_IO))
 492		return -ENXIO;
 493	if (offset < rp->start || (offset + size) > rp->end)
 494		return -ENXIO;
 495	addr = hose->io_base_virt + port;
 496
 497	switch(size) {
 498	case 1:
 499		*((u8 *)val) = in_8(addr);
 500		return 1;
 501	case 2:
 502		if (port & 1)
 503			return -EINVAL;
 504		*((u16 *)val) = in_le16(addr);
 505		return 2;
 506	case 4:
 507		if (port & 3)
 508			return -EINVAL;
 509		*((u32 *)val) = in_le32(addr);
 510		return 4;
 511	}
 512	return -EINVAL;
 513}
 514
 515/* This provides legacy IO write access on a bus */
 516int pci_legacy_write(struct pci_bus *bus, loff_t port, u32 val, size_t size)
 517{
 518	unsigned long offset;
 519	struct pci_controller *hose = pci_bus_to_host(bus);
 520	struct resource *rp = &hose->io_resource;
 521	void __iomem *addr;
 522
 523	/* Check if port can be supported by that bus. We only check
 524	 * the ranges of the PHB though, not the bus itself as the rules
 525	 * for forwarding legacy cycles down bridges are not our problem
 526	 * here. So if the host bridge supports it, we do it.
 527	 */
 528	offset = (unsigned long)hose->io_base_virt - _IO_BASE;
 529	offset += port;
 530
 531	if (!(rp->flags & IORESOURCE_IO))
 532		return -ENXIO;
 533	if (offset < rp->start || (offset + size) > rp->end)
 534		return -ENXIO;
 535	addr = hose->io_base_virt + port;
 536
 537	/* WARNING: The generic code is idiotic. It gets passed a pointer
 538	 * to what can be a 1, 2 or 4 byte quantity and always reads that
 539	 * as a u32, which means that we have to correct the location of
 540	 * the data read within those 32 bits for size 1 and 2
 541	 */
 542	switch(size) {
 543	case 1:
 544		out_8(addr, val >> 24);
 545		return 1;
 546	case 2:
 547		if (port & 1)
 548			return -EINVAL;
 549		out_le16(addr, val >> 16);
 550		return 2;
 551	case 4:
 552		if (port & 3)
 553			return -EINVAL;
 554		out_le32(addr, val);
 555		return 4;
 556	}
 557	return -EINVAL;
 558}
 559
 560/* This provides legacy IO or memory mmap access on a bus */
 561int pci_mmap_legacy_page_range(struct pci_bus *bus,
 562			       struct vm_area_struct *vma,
 563			       enum pci_mmap_state mmap_state)
 564{
 565	struct pci_controller *hose = pci_bus_to_host(bus);
 566	resource_size_t offset =
 567		((resource_size_t)vma->vm_pgoff) << PAGE_SHIFT;
 568	resource_size_t size = vma->vm_end - vma->vm_start;
 569	struct resource *rp;
 570
 571	pr_debug("pci_mmap_legacy_page_range(%04x:%02x, %s @%llx..%llx)\n",
 572		 pci_domain_nr(bus), bus->number,
 573		 mmap_state == pci_mmap_mem ? "MEM" : "IO",
 574		 (unsigned long long)offset,
 575		 (unsigned long long)(offset + size - 1));
 576
 577	if (mmap_state == pci_mmap_mem) {
 578		/* Hack alert !
 579		 *
 580		 * Because X is lame and can fail starting if it gets an error trying
 581		 * to mmap legacy_mem (instead of just moving on without legacy memory
 582		 * access) we fake it here by giving it anonymous memory, effectively
 583		 * behaving just like /dev/zero
 584		 */
 585		if ((offset + size) > hose->isa_mem_size) {
 586			printk(KERN_DEBUG
 587			       "Process %s (pid:%d) mapped non-existing PCI legacy memory for 0%04x:%02x\n",
 588			       current->comm, current->pid, pci_domain_nr(bus), bus->number);
 589			if (vma->vm_flags & VM_SHARED)
 590				return shmem_zero_setup(vma);
 591			return 0;
 592		}
 593		offset += hose->isa_mem_phys;
 594	} else {
 595		unsigned long io_offset = (unsigned long)hose->io_base_virt - _IO_BASE;
 596		unsigned long roffset = offset + io_offset;
 597		rp = &hose->io_resource;
 598		if (!(rp->flags & IORESOURCE_IO))
 599			return -ENXIO;
 600		if (roffset < rp->start || (roffset + size) > rp->end)
 601			return -ENXIO;
 602		offset += hose->io_base_phys;
 603	}
 604	pr_debug(" -> mapping phys %llx\n", (unsigned long long)offset);
 605
 606	vma->vm_pgoff = offset >> PAGE_SHIFT;
 607	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
 608	return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
 609			       vma->vm_end - vma->vm_start,
 610			       vma->vm_page_prot);
 611}
 612
 613void pci_resource_to_user(const struct pci_dev *dev, int bar,
 614			  const struct resource *rsrc,
 615			  resource_size_t *start, resource_size_t *end)
 616{
 617	struct pci_bus_region region;
 
 618
 619	if (rsrc->flags & IORESOURCE_IO) {
 620		pcibios_resource_to_bus(dev->bus, &region,
 621					(struct resource *) rsrc);
 622		*start = region.start;
 623		*end = region.end;
 624		return;
 625	}
 626
 627	/* We pass a CPU physical address to userland for MMIO instead of a
 628	 * BAR value because X is lame and expects to be able to use that
 629	 * to pass to /dev/mem!
 
 
 
 
 
 
 
 
 630	 *
 631	 * That means we may have 64-bit values where some apps only expect
 632	 * 32 (like X itself since it thinks only Sparc has 64-bit MMIO).
 
 
 
 
 
 633	 */
 634	*start = rsrc->start;
 635	*end = rsrc->end;
 
 
 
 
 
 636}
 637
 638/**
 639 * pci_process_bridge_OF_ranges - Parse PCI bridge resources from device tree
 640 * @hose: newly allocated pci_controller to be setup
 641 * @dev: device node of the host bridge
 642 * @primary: set if primary bus (32 bits only, soon to be deprecated)
 643 *
 644 * This function will parse the "ranges" property of a PCI host bridge device
 645 * node and setup the resource mapping of a pci controller based on its
 646 * content.
 647 *
 648 * Life would be boring if it wasn't for a few issues that we have to deal
 649 * with here:
 650 *
 651 *   - We can only cope with one IO space range and up to 3 Memory space
 652 *     ranges. However, some machines (thanks Apple !) tend to split their
 653 *     space into lots of small contiguous ranges. So we have to coalesce.
 654 *
 
 
 
 
 
 
 
 
 
 655 *   - Some busses have IO space not starting at 0, which causes trouble with
 656 *     the way we do our IO resource renumbering. The code somewhat deals with
 657 *     it for 64 bits but I would expect problems on 32 bits.
 658 *
 659 *   - Some 32 bits platforms such as 4xx can have physical space larger than
 660 *     32 bits so we need to use 64 bits values for the parsing
 661 */
 662void pci_process_bridge_OF_ranges(struct pci_controller *hose,
 663				  struct device_node *dev, int primary)
 664{
 665	int memno = 0;
 
 
 
 
 
 
 
 
 666	struct resource *res;
 667	struct of_pci_range range;
 668	struct of_pci_range_parser parser;
 669
 670	printk(KERN_INFO "PCI host bridge %pOF %s ranges:\n",
 671	       dev, primary ? "(primary)" : "");
 672
 673	/* Check for ranges property */
 674	if (of_pci_range_parser_init(&parser, dev))
 
 675		return;
 676
 677	/* Parse it */
 678	for_each_of_pci_range(&parser, &range) {
 
 
 
 
 
 
 
 679		/* If we failed translation or got a zero-sized region
 680		 * (some FW try to feed us with non sensical zero sized regions
 681		 * such as power3 which look like some kind of attempt at exposing
 682		 * the VGA memory hole)
 683		 */
 684		if (range.cpu_addr == OF_BAD_ADDR || range.size == 0)
 685			continue;
 686
 
 
 
 
 
 
 
 
 
 
 
 
 
 687		/* Act based on address space type */
 688		res = NULL;
 689		switch (range.flags & IORESOURCE_TYPE_BITS) {
 690		case IORESOURCE_IO:
 691			printk(KERN_INFO
 692			       "  IO 0x%016llx..0x%016llx -> 0x%016llx\n",
 693			       range.cpu_addr, range.cpu_addr + range.size - 1,
 694			       range.pci_addr);
 695
 696			/* We support only one IO range */
 697			if (hose->pci_io_size) {
 698				printk(KERN_INFO
 699				       " \\--> Skipped (too many) !\n");
 700				continue;
 701			}
 702#ifdef CONFIG_PPC32
 703			/* On 32 bits, limit I/O space to 16MB */
 704			if (range.size > 0x01000000)
 705				range.size = 0x01000000;
 706
 707			/* 32 bits needs to map IOs here */
 708			hose->io_base_virt = ioremap(range.cpu_addr,
 709						range.size);
 710
 711			/* Expect trouble if pci_addr is not 0 */
 712			if (primary)
 713				isa_io_base =
 714					(unsigned long)hose->io_base_virt;
 715#endif /* CONFIG_PPC32 */
 716			/* pci_io_size and io_base_phys always represent IO
 717			 * space starting at 0 so we factor in pci_addr
 718			 */
 719			hose->pci_io_size = range.pci_addr + range.size;
 720			hose->io_base_phys = range.cpu_addr - range.pci_addr;
 721
 722			/* Build resource */
 723			res = &hose->io_resource;
 724			range.cpu_addr = range.pci_addr;
 
 725			break;
 726		case IORESOURCE_MEM:
 
 727			printk(KERN_INFO
 728			       " MEM 0x%016llx..0x%016llx -> 0x%016llx %s\n",
 729			       range.cpu_addr, range.cpu_addr + range.size - 1,
 730			       range.pci_addr,
 731			       (range.flags & IORESOURCE_PREFETCH) ?
 732			       "Prefetch" : "");
 733
 734			/* We support only 3 memory ranges */
 735			if (memno >= 3) {
 736				printk(KERN_INFO
 737				       " \\--> Skipped (too many) !\n");
 738				continue;
 739			}
 740			/* Handles ISA memory hole space here */
 741			if (range.pci_addr == 0) {
 
 
 742				if (primary || isa_mem_base == 0)
 743					isa_mem_base = range.cpu_addr;
 744				hose->isa_mem_phys = range.cpu_addr;
 745				hose->isa_mem_size = range.size;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 746			}
 747
 748			/* Build resource */
 749			hose->mem_offset[memno] = range.cpu_addr -
 750							range.pci_addr;
 751			res = &hose->mem_resources[memno++];
 
 
 
 
 752			break;
 753		}
 754		if (res != NULL) {
 755			res->name = dev->full_name;
 756			res->flags = range.flags;
 757			res->start = range.cpu_addr;
 758			res->end = range.cpu_addr + range.size - 1;
 759			res->parent = res->child = res->sibling = NULL;
 760		}
 761	}
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 762}
 763
 764/* Decide whether to display the domain number in /proc */
 765int pci_proc_domain(struct pci_bus *bus)
 766{
 767	struct pci_controller *hose = pci_bus_to_host(bus);
 768
 769	if (!pci_has_flag(PCI_ENABLE_PROC_DOMAINS))
 770		return 0;
 771	if (pci_has_flag(PCI_COMPAT_DOMAIN_0))
 772		return hose->global_number != 0;
 773	return 1;
 774}
 775
 776int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
 777{
 778	if (ppc_md.pcibios_root_bridge_prepare)
 779		return ppc_md.pcibios_root_bridge_prepare(bridge);
 780
 781	return 0;
 782}
 783
 784/* This header fixup will do the resource fixup for all devices as they are
 785 * probed, but not for bridge ranges
 786 */
 787static void pcibios_fixup_resources(struct pci_dev *dev)
 788{
 789	struct pci_controller *hose = pci_bus_to_host(dev->bus);
 790	int i;
 791
 792	if (!hose) {
 793		printk(KERN_ERR "No host bridge for PCI dev %s !\n",
 794		       pci_name(dev));
 795		return;
 796	}
 797
 798	if (dev->is_virtfn)
 799		return;
 800
 801	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
 802		struct resource *res = dev->resource + i;
 803		struct pci_bus_region reg;
 804		if (!res->flags)
 805			continue;
 806
 807		/* If we're going to re-assign everything, we mark all resources
 808		 * as unset (and 0-base them). In addition, we mark BARs starting
 809		 * at 0 as unset as well, except if PCI_PROBE_ONLY is also set
 810		 * since in that case, we don't want to re-assign anything
 811		 */
 812		pcibios_resource_to_bus(dev->bus, &reg, res);
 813		if (pci_has_flag(PCI_REASSIGN_ALL_RSRC) ||
 814		    (reg.start == 0 && !pci_has_flag(PCI_PROBE_ONLY))) {
 815			/* Only print message if not re-assigning */
 816			if (!pci_has_flag(PCI_REASSIGN_ALL_RSRC))
 817				pr_debug("PCI:%s Resource %d %pR is unassigned\n",
 818					 pci_name(dev), i, res);
 
 
 
 
 819			res->end -= res->start;
 820			res->start = 0;
 821			res->flags |= IORESOURCE_UNSET;
 822			continue;
 823		}
 824
 825		pr_debug("PCI:%s Resource %d %pR\n", pci_name(dev), i, res);
 
 
 
 
 826	}
 827
 828	/* Call machine specific resource fixup */
 829	if (ppc_md.pcibios_fixup_resources)
 830		ppc_md.pcibios_fixup_resources(dev);
 831}
 832DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pcibios_fixup_resources);
 833
 834/* This function tries to figure out if a bridge resource has been initialized
 835 * by the firmware or not. It doesn't have to be absolutely bullet proof, but
 836 * things go more smoothly when it gets it right. It should covers cases such
 837 * as Apple "closed" bridge resources and bare-metal pSeries unassigned bridges
 838 */
 839static int pcibios_uninitialized_bridge_resource(struct pci_bus *bus,
 840						 struct resource *res)
 841{
 842	struct pci_controller *hose = pci_bus_to_host(bus);
 843	struct pci_dev *dev = bus->self;
 844	resource_size_t offset;
 845	struct pci_bus_region region;
 846	u16 command;
 847	int i;
 848
 849	/* We don't do anything if PCI_PROBE_ONLY is set */
 850	if (pci_has_flag(PCI_PROBE_ONLY))
 851		return 0;
 852
 853	/* Job is a bit different between memory and IO */
 854	if (res->flags & IORESOURCE_MEM) {
 855		pcibios_resource_to_bus(dev->bus, &region, res);
 856
 857		/* If the BAR is non-0 then it's probably been initialized */
 858		if (region.start != 0)
 859			return 0;
 860
 861		/* The BAR is 0, let's check if memory decoding is enabled on
 862		 * the bridge. If not, we consider it unassigned
 863		 */
 864		pci_read_config_word(dev, PCI_COMMAND, &command);
 865		if ((command & PCI_COMMAND_MEMORY) == 0)
 866			return 1;
 867
 868		/* Memory decoding is enabled and the BAR is 0. If any of the bridge
 869		 * resources covers that starting address (0 then it's good enough for
 870		 * us for memory space)
 871		 */
 872		for (i = 0; i < 3; i++) {
 873			if ((hose->mem_resources[i].flags & IORESOURCE_MEM) &&
 874			    hose->mem_resources[i].start == hose->mem_offset[i])
 875				return 0;
 876		}
 877
 878		/* Well, it starts at 0 and we know it will collide so we may as
 879		 * well consider it as unassigned. That covers the Apple case.
 880		 */
 881		return 1;
 882	} else {
 883		/* If the BAR is non-0, then we consider it assigned */
 884		offset = (unsigned long)hose->io_base_virt - _IO_BASE;
 885		if (((res->start - offset) & 0xfffffffful) != 0)
 886			return 0;
 887
 888		/* Here, we are a bit different than memory as typically IO space
 889		 * starting at low addresses -is- valid. What we do instead if that
 890		 * we consider as unassigned anything that doesn't have IO enabled
 891		 * in the PCI command register, and that's it.
 892		 */
 893		pci_read_config_word(dev, PCI_COMMAND, &command);
 894		if (command & PCI_COMMAND_IO)
 895			return 0;
 896
 897		/* It's starting at 0 and IO is disabled in the bridge, consider
 898		 * it unassigned
 899		 */
 900		return 1;
 901	}
 902}
 903
 904/* Fixup resources of a PCI<->PCI bridge */
 905static void pcibios_fixup_bridge(struct pci_bus *bus)
 906{
 907	struct resource *res;
 908	int i;
 909
 910	struct pci_dev *dev = bus->self;
 911
 912	pci_bus_for_each_resource(bus, res, i) {
 913		if (!res || !res->flags)
 914			continue;
 915		if (i >= 3 && bus->self->transparent)
 916			continue;
 917
 918		/* If we're going to reassign everything, we can
 919		 * shrink the P2P resource to have size as being
 920		 * of 0 in order to save space.
 921		 */
 922		if (pci_has_flag(PCI_REASSIGN_ALL_RSRC)) {
 923			res->flags |= IORESOURCE_UNSET;
 
 924			res->start = 0;
 925			res->end = -1;
 926			continue;
 927		}
 928
 929		pr_debug("PCI:%s Bus rsrc %d %pR\n", pci_name(dev), i, res);
 
 
 
 
 930
 931		/* Try to detect uninitialized P2P bridge resources,
 932		 * and clear them out so they get re-assigned later
 933		 */
 934		if (pcibios_uninitialized_bridge_resource(bus, res)) {
 935			res->flags = 0;
 936			pr_debug("PCI:%s            (unassigned)\n", pci_name(dev));
 937		}
 938	}
 939}
 940
 941void pcibios_setup_bus_self(struct pci_bus *bus)
 942{
 943	struct pci_controller *phb;
 944
 945	/* Fix up the bus resources for P2P bridges */
 946	if (bus->self != NULL)
 947		pcibios_fixup_bridge(bus);
 948
 949	/* Platform specific bus fixups. This is currently only used
 950	 * by fsl_pci and I'm hoping to get rid of it at some point
 951	 */
 952	if (ppc_md.pcibios_fixup_bus)
 953		ppc_md.pcibios_fixup_bus(bus);
 954
 955	/* Setup bus DMA mappings */
 956	phb = pci_bus_to_host(bus);
 957	if (phb->controller_ops.dma_bus_setup)
 958		phb->controller_ops.dma_bus_setup(bus);
 959}
 960
 961void pcibios_bus_add_device(struct pci_dev *dev)
 962{
 963	struct pci_controller *phb;
 964	/* Fixup NUMA node as it may not be setup yet by the generic
 965	 * code and is needed by the DMA init
 966	 */
 967	set_dev_node(&dev->dev, pcibus_to_node(dev->bus));
 968
 969	/* Hook up default DMA ops */
 970	set_dma_ops(&dev->dev, pci_dma_ops);
 971	dev->dev.archdata.dma_offset = PCI_DRAM_OFFSET;
 972
 973	/* Additional platform DMA/iommu setup */
 974	phb = pci_bus_to_host(dev->bus);
 975	if (phb->controller_ops.dma_dev_setup)
 976		phb->controller_ops.dma_dev_setup(dev);
 977
 978	/* Read default IRQs and fixup if necessary */
 979	pci_read_irq_line(dev);
 980	if (ppc_md.pci_irq_fixup)
 981		ppc_md.pci_irq_fixup(dev);
 982
 983	if (ppc_md.pcibios_bus_add_device)
 984		ppc_md.pcibios_bus_add_device(dev);
 985}
 
 
 
 986
 987int pcibios_add_device(struct pci_dev *dev)
 988{
 989#ifdef CONFIG_PCI_IOV
 990	if (ppc_md.pcibios_fixup_sriov)
 991		ppc_md.pcibios_fixup_sriov(dev);
 992#endif /* CONFIG_PCI_IOV */
 993
 994	return 0;
 
 
 
 
 
 
 
 
 
 
 
 
 995}
 996
 997void pcibios_set_master(struct pci_dev *dev)
 998{
 999	/* No special bus mastering setup handling */
1000}
1001
1002void pcibios_fixup_bus(struct pci_bus *bus)
1003{
1004	/* When called from the generic PCI probe, read PCI<->PCI bridge
1005	 * bases. This is -not- called when generating the PCI tree from
1006	 * the OF device-tree.
1007	 */
1008	pci_read_bridge_bases(bus);
 
1009
1010	/* Now fixup the bus bus */
1011	pcibios_setup_bus_self(bus);
 
 
 
1012}
1013EXPORT_SYMBOL(pcibios_fixup_bus);
1014
 
 
 
 
 
 
 
1015static int skip_isa_ioresource_align(struct pci_dev *dev)
1016{
1017	if (pci_has_flag(PCI_CAN_SKIP_ISA_ALIGN) &&
1018	    !(dev->bus->bridge_ctl & PCI_BRIDGE_CTL_ISA))
1019		return 1;
1020	return 0;
1021}
1022
1023/*
1024 * We need to avoid collisions with `mirrored' VGA ports
1025 * and other strange ISA hardware, so we always want the
1026 * addresses to be allocated in the 0x000-0x0ff region
1027 * modulo 0x400.
1028 *
1029 * Why? Because some silly external IO cards only decode
1030 * the low 10 bits of the IO address. The 0x00-0xff region
1031 * is reserved for motherboard devices that decode all 16
1032 * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
1033 * but we want to try to avoid allocating at 0x2900-0x2bff
1034 * which might have be mirrored at 0x0100-0x03ff..
1035 */
1036resource_size_t pcibios_align_resource(void *data, const struct resource *res,
1037				resource_size_t size, resource_size_t align)
1038{
1039	struct pci_dev *dev = data;
1040	resource_size_t start = res->start;
1041
1042	if (res->flags & IORESOURCE_IO) {
1043		if (skip_isa_ioresource_align(dev))
1044			return start;
1045		if (start & 0x300)
1046			start = (start + 0x3ff) & ~0x3ff;
1047	}
1048
1049	return start;
1050}
1051EXPORT_SYMBOL(pcibios_align_resource);
1052
1053/*
1054 * Reparent resource children of pr that conflict with res
1055 * under res, and make res replace those children.
1056 */
1057static int reparent_resources(struct resource *parent,
1058				     struct resource *res)
1059{
1060	struct resource *p, **pp;
1061	struct resource **firstpp = NULL;
1062
1063	for (pp = &parent->child; (p = *pp) != NULL; pp = &p->sibling) {
1064		if (p->end < res->start)
1065			continue;
1066		if (res->end < p->start)
1067			break;
1068		if (p->start < res->start || p->end > res->end)
1069			return -1;	/* not completely contained */
1070		if (firstpp == NULL)
1071			firstpp = pp;
1072	}
1073	if (firstpp == NULL)
1074		return -1;	/* didn't find any conflicting entries? */
1075	res->parent = parent;
1076	res->child = *firstpp;
1077	res->sibling = *pp;
1078	*firstpp = res;
1079	*pp = NULL;
1080	for (p = res->child; p != NULL; p = p->sibling) {
1081		p->parent = res;
1082		pr_debug("PCI: Reparented %s %pR under %s\n",
1083			 p->name, p, res->name);
 
 
1084	}
1085	return 0;
1086}
1087
1088/*
1089 *  Handle resources of PCI devices.  If the world were perfect, we could
1090 *  just allocate all the resource regions and do nothing more.  It isn't.
1091 *  On the other hand, we cannot just re-allocate all devices, as it would
1092 *  require us to know lots of host bridge internals.  So we attempt to
1093 *  keep as much of the original configuration as possible, but tweak it
1094 *  when it's found to be wrong.
1095 *
1096 *  Known BIOS problems we have to work around:
1097 *	- I/O or memory regions not configured
1098 *	- regions configured, but not enabled in the command register
1099 *	- bogus I/O addresses above 64K used
1100 *	- expansion ROMs left enabled (this may sound harmless, but given
1101 *	  the fact the PCI specs explicitly allow address decoders to be
1102 *	  shared between expansion ROMs and other resource regions, it's
1103 *	  at least dangerous)
1104 *
1105 *  Our solution:
1106 *	(1) Allocate resources for all buses behind PCI-to-PCI bridges.
1107 *	    This gives us fixed barriers on where we can allocate.
1108 *	(2) Allocate resources for all enabled devices.  If there is
1109 *	    a collision, just mark the resource as unallocated. Also
1110 *	    disable expansion ROMs during this step.
1111 *	(3) Try to allocate resources for disabled devices.  If the
1112 *	    resources were assigned correctly, everything goes well,
1113 *	    if they weren't, they won't disturb allocation of other
1114 *	    resources.
1115 *	(4) Assign new addresses to resources which were either
1116 *	    not configured at all or misconfigured.  If explicitly
1117 *	    requested by the user, configure expansion ROM address
1118 *	    as well.
1119 */
1120
1121static void pcibios_allocate_bus_resources(struct pci_bus *bus)
1122{
1123	struct pci_bus *b;
1124	int i;
1125	struct resource *res, *pr;
1126
1127	pr_debug("PCI: Allocating bus resources for %04x:%02x...\n",
1128		 pci_domain_nr(bus), bus->number);
1129
1130	pci_bus_for_each_resource(bus, res, i) {
1131		if (!res || !res->flags || res->start > res->end || res->parent)
1132			continue;
1133
1134		/* If the resource was left unset at this point, we clear it */
1135		if (res->flags & IORESOURCE_UNSET)
1136			goto clear_resource;
1137
1138		if (bus->parent == NULL)
1139			pr = (res->flags & IORESOURCE_IO) ?
1140				&ioport_resource : &iomem_resource;
1141		else {
1142			pr = pci_find_parent_resource(bus->self, res);
1143			if (pr == res) {
1144				/* this happens when the generic PCI
1145				 * code (wrongly) decides that this
1146				 * bridge is transparent  -- paulus
1147				 */
1148				continue;
1149			}
1150		}
1151
1152		pr_debug("PCI: %s (bus %d) bridge rsrc %d: %pR, parent %p (%s)\n",
1153			 bus->self ? pci_name(bus->self) : "PHB", bus->number,
1154			 i, res, pr, (pr && pr->name) ? pr->name : "nil");
 
 
 
 
 
1155
1156		if (pr && !(pr->flags & IORESOURCE_UNSET)) {
1157			struct pci_dev *dev = bus->self;
1158
1159			if (request_resource(pr, res) == 0)
1160				continue;
1161			/*
1162			 * Must be a conflict with an existing entry.
1163			 * Move that entry (or entries) under the
1164			 * bridge resource and try again.
1165			 */
1166			if (reparent_resources(pr, res) == 0)
1167				continue;
1168
1169			if (dev && i < PCI_BRIDGE_RESOURCE_NUM &&
1170			    pci_claim_bridge_resource(dev,
1171						i + PCI_BRIDGE_RESOURCES) == 0)
1172				continue;
1173		}
1174		pr_warn("PCI: Cannot allocate resource region %d of PCI bridge %d, will remap\n",
1175			i, bus->number);
1176	clear_resource:
1177		/* The resource might be figured out when doing
1178		 * reassignment based on the resources required
1179		 * by the downstream PCI devices. Here we set
1180		 * the size of the resource to be 0 in order to
1181		 * save more space.
1182		 */
1183		res->start = 0;
1184		res->end = -1;
1185		res->flags = 0;
1186	}
1187
1188	list_for_each_entry(b, &bus->children, node)
1189		pcibios_allocate_bus_resources(b);
1190}
1191
1192static inline void alloc_resource(struct pci_dev *dev, int idx)
1193{
1194	struct resource *pr, *r = &dev->resource[idx];
1195
1196	pr_debug("PCI: Allocating %s: Resource %d: %pR\n",
1197		 pci_name(dev), idx, r);
 
 
 
1198
1199	pr = pci_find_parent_resource(dev, r);
1200	if (!pr || (pr->flags & IORESOURCE_UNSET) ||
1201	    request_resource(pr, r) < 0) {
1202		printk(KERN_WARNING "PCI: Cannot allocate resource region %d"
1203		       " of device %s, will remap\n", idx, pci_name(dev));
1204		if (pr)
1205			pr_debug("PCI:  parent is %p: %pR\n", pr, pr);
 
 
 
 
1206		/* We'll assign a new address later */
1207		r->flags |= IORESOURCE_UNSET;
1208		r->end -= r->start;
1209		r->start = 0;
1210	}
1211}
1212
1213static void __init pcibios_allocate_resources(int pass)
1214{
1215	struct pci_dev *dev = NULL;
1216	int idx, disabled;
1217	u16 command;
1218	struct resource *r;
1219
1220	for_each_pci_dev(dev) {
1221		pci_read_config_word(dev, PCI_COMMAND, &command);
1222		for (idx = 0; idx <= PCI_ROM_RESOURCE; idx++) {
1223			r = &dev->resource[idx];
1224			if (r->parent)		/* Already allocated */
1225				continue;
1226			if (!r->flags || (r->flags & IORESOURCE_UNSET))
1227				continue;	/* Not assigned at all */
1228			/* We only allocate ROMs on pass 1 just in case they
1229			 * have been screwed up by firmware
1230			 */
1231			if (idx == PCI_ROM_RESOURCE )
1232				disabled = 1;
1233			if (r->flags & IORESOURCE_IO)
1234				disabled = !(command & PCI_COMMAND_IO);
1235			else
1236				disabled = !(command & PCI_COMMAND_MEMORY);
1237			if (pass == disabled)
1238				alloc_resource(dev, idx);
1239		}
1240		if (pass)
1241			continue;
1242		r = &dev->resource[PCI_ROM_RESOURCE];
1243		if (r->flags) {
1244			/* Turn the ROM off, leave the resource region,
1245			 * but keep it unregistered.
1246			 */
1247			u32 reg;
1248			pci_read_config_dword(dev, dev->rom_base_reg, &reg);
1249			if (reg & PCI_ROM_ADDRESS_ENABLE) {
1250				pr_debug("PCI: Switching off ROM of %s\n",
1251					 pci_name(dev));
1252				r->flags &= ~IORESOURCE_ROM_ENABLE;
1253				pci_write_config_dword(dev, dev->rom_base_reg,
1254						       reg & ~PCI_ROM_ADDRESS_ENABLE);
1255			}
1256		}
1257	}
1258}
1259
1260static void __init pcibios_reserve_legacy_regions(struct pci_bus *bus)
1261{
1262	struct pci_controller *hose = pci_bus_to_host(bus);
1263	resource_size_t	offset;
1264	struct resource *res, *pres;
1265	int i;
1266
1267	pr_debug("Reserving legacy ranges for domain %04x\n", pci_domain_nr(bus));
1268
1269	/* Check for IO */
1270	if (!(hose->io_resource.flags & IORESOURCE_IO))
1271		goto no_io;
1272	offset = (unsigned long)hose->io_base_virt - _IO_BASE;
1273	res = kzalloc(sizeof(struct resource), GFP_KERNEL);
1274	BUG_ON(res == NULL);
1275	res->name = "Legacy IO";
1276	res->flags = IORESOURCE_IO;
1277	res->start = offset;
1278	res->end = (offset + 0xfff) & 0xfffffffful;
1279	pr_debug("Candidate legacy IO: %pR\n", res);
1280	if (request_resource(&hose->io_resource, res)) {
1281		printk(KERN_DEBUG
1282		       "PCI %04x:%02x Cannot reserve Legacy IO %pR\n",
1283		       pci_domain_nr(bus), bus->number, res);
1284		kfree(res);
1285	}
1286
1287 no_io:
1288	/* Check for memory */
 
 
1289	for (i = 0; i < 3; i++) {
1290		pres = &hose->mem_resources[i];
1291		offset = hose->mem_offset[i];
1292		if (!(pres->flags & IORESOURCE_MEM))
1293			continue;
1294		pr_debug("hose mem res: %pR\n", pres);
1295		if ((pres->start - offset) <= 0xa0000 &&
1296		    (pres->end - offset) >= 0xbffff)
1297			break;
1298	}
1299	if (i >= 3)
1300		return;
1301	res = kzalloc(sizeof(struct resource), GFP_KERNEL);
1302	BUG_ON(res == NULL);
1303	res->name = "Legacy VGA memory";
1304	res->flags = IORESOURCE_MEM;
1305	res->start = 0xa0000 + offset;
1306	res->end = 0xbffff + offset;
1307	pr_debug("Candidate VGA memory: %pR\n", res);
1308	if (request_resource(pres, res)) {
1309		printk(KERN_DEBUG
1310		       "PCI %04x:%02x Cannot reserve VGA memory %pR\n",
1311		       pci_domain_nr(bus), bus->number, res);
1312		kfree(res);
1313	}
1314}
1315
1316void __init pcibios_resource_survey(void)
1317{
1318	struct pci_bus *b;
1319
1320	/* Allocate and assign resources */
1321	list_for_each_entry(b, &pci_root_buses, node)
1322		pcibios_allocate_bus_resources(b);
1323	if (!pci_has_flag(PCI_REASSIGN_ALL_RSRC)) {
1324		pcibios_allocate_resources(0);
1325		pcibios_allocate_resources(1);
1326	}
1327
1328	/* Before we start assigning unassigned resource, we try to reserve
1329	 * the low IO area and the VGA memory area if they intersect the
1330	 * bus available resources to avoid allocating things on top of them
1331	 */
1332	if (!pci_has_flag(PCI_PROBE_ONLY)) {
1333		list_for_each_entry(b, &pci_root_buses, node)
1334			pcibios_reserve_legacy_regions(b);
1335	}
1336
1337	/* Now, if the platform didn't decide to blindly trust the firmware,
1338	 * we proceed to assigning things that were left unassigned
1339	 */
1340	if (!pci_has_flag(PCI_PROBE_ONLY)) {
1341		pr_debug("PCI: Assigning unassigned resources...\n");
1342		pci_assign_unassigned_resources();
1343	}
 
 
 
 
1344}
1345
 
 
1346/* This is used by the PCI hotplug driver to allocate resource
1347 * of newly plugged busses. We can try to consolidate with the
1348 * rest of the code later, for now, keep it as-is as our main
1349 * resource allocation function doesn't deal with sub-trees yet.
1350 */
1351void pcibios_claim_one_bus(struct pci_bus *bus)
1352{
1353	struct pci_dev *dev;
1354	struct pci_bus *child_bus;
1355
1356	list_for_each_entry(dev, &bus->devices, bus_list) {
1357		int i;
1358
1359		for (i = 0; i < PCI_NUM_RESOURCES; i++) {
1360			struct resource *r = &dev->resource[i];
1361
1362			if (r->parent || !r->start || !r->flags)
1363				continue;
1364
1365			pr_debug("PCI: Claiming %s: Resource %d: %pR\n",
1366				 pci_name(dev), i, r);
 
 
 
 
1367
1368			if (pci_claim_resource(dev, i) == 0)
1369				continue;
1370
1371			pci_claim_bridge_resource(dev, i);
1372		}
1373	}
1374
1375	list_for_each_entry(child_bus, &bus->children, node)
1376		pcibios_claim_one_bus(child_bus);
1377}
1378EXPORT_SYMBOL_GPL(pcibios_claim_one_bus);
1379
1380
1381/* pcibios_finish_adding_to_bus
1382 *
1383 * This is to be called by the hotplug code after devices have been
1384 * added to a bus, this include calling it for a PHB that is just
1385 * being added
1386 */
1387void pcibios_finish_adding_to_bus(struct pci_bus *bus)
1388{
1389	pr_debug("PCI: Finishing adding to hotplug bus %04x:%02x\n",
1390		 pci_domain_nr(bus), bus->number);
1391
1392	/* Allocate bus and devices resources */
1393	pcibios_allocate_bus_resources(bus);
1394	pcibios_claim_one_bus(bus);
1395	if (!pci_has_flag(PCI_PROBE_ONLY)) {
1396		if (bus->self)
1397			pci_assign_unassigned_bridge_resources(bus->self);
1398		else
1399			pci_assign_unassigned_bus_resources(bus);
1400	}
1401
1402	/* Add new devices to global lists.  Register in proc, sysfs. */
1403	pci_bus_add_devices(bus);
 
 
 
1404}
1405EXPORT_SYMBOL_GPL(pcibios_finish_adding_to_bus);
1406
 
 
1407int pcibios_enable_device(struct pci_dev *dev, int mask)
1408{
1409	struct pci_controller *phb = pci_bus_to_host(dev->bus);
1410
1411	if (phb->controller_ops.enable_device_hook)
1412		if (!phb->controller_ops.enable_device_hook(dev))
1413			return -EINVAL;
1414
1415	return pci_enable_resources(dev, mask);
1416}
1417
1418void pcibios_disable_device(struct pci_dev *dev)
1419{
1420	struct pci_controller *phb = pci_bus_to_host(dev->bus);
1421
1422	if (phb->controller_ops.disable_device)
1423		phb->controller_ops.disable_device(dev);
1424}
1425
1426resource_size_t pcibios_io_space_offset(struct pci_controller *hose)
1427{
1428	return (unsigned long) hose->io_base_virt - _IO_BASE;
1429}
1430
1431static void pcibios_setup_phb_resources(struct pci_controller *hose,
1432					struct list_head *resources)
1433{
1434	struct resource *res;
1435	resource_size_t offset;
1436	int i;
1437
1438	/* Hookup PHB IO resource */
1439	res = &hose->io_resource;
1440
1441	if (!res->flags) {
1442		pr_debug("PCI: I/O resource not set for host"
1443			 " bridge %pOF (domain %d)\n",
1444			 hose->dn, hose->global_number);
1445	} else {
1446		offset = pcibios_io_space_offset(hose);
1447
1448		pr_debug("PCI: PHB IO resource    = %pR off 0x%08llx\n",
1449			 res, (unsigned long long)offset);
1450		pci_add_resource_offset(resources, res, offset);
1451	}
1452
 
 
 
 
 
 
1453	/* Hookup PHB Memory resources */
1454	for (i = 0; i < 3; ++i) {
1455		res = &hose->mem_resources[i];
1456		if (!res->flags)
1457			continue;
1458
1459		offset = hose->mem_offset[i];
1460		pr_debug("PCI: PHB MEM resource %d = %pR off 0x%08llx\n", i,
1461			 res, (unsigned long long)offset);
 
 
 
 
 
 
 
1462
1463		pci_add_resource_offset(resources, res, offset);
 
 
 
 
1464	}
 
 
 
 
 
 
1465}
1466
1467/*
1468 * Null PCI config access functions, for the case when we can't
1469 * find a hose.
1470 */
1471#define NULL_PCI_OP(rw, size, type)					\
1472static int								\
1473null_##rw##_config_##size(struct pci_dev *dev, int offset, type val)	\
1474{									\
1475	return PCIBIOS_DEVICE_NOT_FOUND;    				\
1476}
1477
1478static int
1479null_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
1480		 int len, u32 *val)
1481{
1482	return PCIBIOS_DEVICE_NOT_FOUND;
1483}
1484
1485static int
1486null_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
1487		  int len, u32 val)
1488{
1489	return PCIBIOS_DEVICE_NOT_FOUND;
1490}
1491
1492static struct pci_ops null_pci_ops =
1493{
1494	.read = null_read_config,
1495	.write = null_write_config,
1496};
1497
1498/*
1499 * These functions are used early on before PCI scanning is done
1500 * and all of the pci_dev and pci_bus structures have been created.
1501 */
1502static struct pci_bus *
1503fake_pci_bus(struct pci_controller *hose, int busnr)
1504{
1505	static struct pci_bus bus;
1506
1507	if (hose == NULL) {
1508		printk(KERN_ERR "Can't find hose for PCI bus %d!\n", busnr);
1509	}
1510	bus.number = busnr;
1511	bus.sysdata = hose;
1512	bus.ops = hose? hose->ops: &null_pci_ops;
1513	return &bus;
1514}
1515
1516#define EARLY_PCI_OP(rw, size, type)					\
1517int early_##rw##_config_##size(struct pci_controller *hose, int bus,	\
1518			       int devfn, int offset, type value)	\
1519{									\
1520	return pci_bus_##rw##_config_##size(fake_pci_bus(hose, bus),	\
1521					    devfn, offset, value);	\
1522}
1523
1524EARLY_PCI_OP(read, byte, u8 *)
1525EARLY_PCI_OP(read, word, u16 *)
1526EARLY_PCI_OP(read, dword, u32 *)
1527EARLY_PCI_OP(write, byte, u8)
1528EARLY_PCI_OP(write, word, u16)
1529EARLY_PCI_OP(write, dword, u32)
1530
 
1531int early_find_capability(struct pci_controller *hose, int bus, int devfn,
1532			  int cap)
1533{
1534	return pci_bus_find_capability(fake_pci_bus(hose, bus), devfn, cap);
1535}
1536
1537struct device_node *pcibios_get_phb_of_node(struct pci_bus *bus)
1538{
1539	struct pci_controller *hose = bus->sysdata;
1540
1541	return of_node_get(hose->dn);
1542}
1543
1544/**
1545 * pci_scan_phb - Given a pci_controller, setup and scan the PCI bus
1546 * @hose: Pointer to the PCI host controller instance structure
1547 */
1548void pcibios_scan_phb(struct pci_controller *hose)
1549{
1550	LIST_HEAD(resources);
1551	struct pci_bus *bus;
1552	struct device_node *node = hose->dn;
1553	int mode;
1554
1555	pr_debug("PCI: Scanning PHB %pOF\n", node);
 
1556
1557	/* Get some IO space for the new PHB */
1558	pcibios_setup_phb_io_space(hose);
1559
1560	/* Wire up PHB bus resources */
1561	pcibios_setup_phb_resources(hose, &resources);
1562
1563	hose->busn.start = hose->first_busno;
1564	hose->busn.end	 = hose->last_busno;
1565	hose->busn.flags = IORESOURCE_BUS;
1566	pci_add_resource(&resources, &hose->busn);
1567
1568	/* Create an empty bus for the toplevel */
1569	bus = pci_create_root_bus(hose->parent, hose->first_busno,
1570				  hose->ops, hose, &resources);
1571	if (bus == NULL) {
1572		pr_err("Failed to create bus for PCI domain %04x\n",
1573			hose->global_number);
1574		pci_free_resource_list(&resources);
1575		return;
1576	}
 
1577	hose->bus = bus;
1578
1579	/* Get probe mode and perform scan */
1580	mode = PCI_PROBE_NORMAL;
1581	if (node && hose->controller_ops.probe_mode)
1582		mode = hose->controller_ops.probe_mode(bus);
1583	pr_debug("    probe mode: %d\n", mode);
1584	if (mode == PCI_PROBE_DEVTREE)
 
1585		of_scan_bus(node, bus);
1586
1587	if (mode == PCI_PROBE_NORMAL) {
1588		pci_bus_update_busn_res_end(bus, 255);
1589		hose->last_busno = pci_scan_child_bus(bus);
1590		pci_bus_update_busn_res_end(bus, hose->last_busno);
1591	}
1592
 
 
 
1593	/* Platform gets a chance to do some global fixups before
1594	 * we proceed to resource allocation
1595	 */
1596	if (ppc_md.pcibios_fixup_phb)
1597		ppc_md.pcibios_fixup_phb(hose);
1598
1599	/* Configure PCI Express settings */
1600	if (bus && !pci_has_flag(PCI_PROBE_ONLY)) {
1601		struct pci_bus *child;
1602		list_for_each_entry(child, &bus->children, node)
1603			pcie_bus_configure_settings(child);
 
 
 
 
1604	}
1605}
1606EXPORT_SYMBOL_GPL(pcibios_scan_phb);
1607
1608static void fixup_hide_host_resource_fsl(struct pci_dev *dev)
1609{
1610	int i, class = dev->class >> 8;
1611	/* When configured as agent, programing interface = 1 */
1612	int prog_if = dev->class & 0xf;
1613
1614	if ((class == PCI_CLASS_PROCESSOR_POWERPC ||
1615	     class == PCI_CLASS_BRIDGE_OTHER) &&
1616		(dev->hdr_type == PCI_HEADER_TYPE_NORMAL) &&
1617		(prog_if == 0) &&
1618		(dev->bus->parent == NULL)) {
1619		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
1620			dev->resource[i].start = 0;
1621			dev->resource[i].end = 0;
1622			dev->resource[i].flags = 0;
1623		}
1624	}
1625}
1626DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MOTOROLA, PCI_ANY_ID, fixup_hide_host_resource_fsl);
1627DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID, fixup_hide_host_resource_fsl);