Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * gpio-vbus.c - simple GPIO VBUS sensing driver for B peripheral devices
4 *
5 * Copyright (c) 2008 Philipp Zabel <philipp.zabel@gmail.com>
6 */
7
8#include <linux/kernel.h>
9#include <linux/platform_device.h>
10#include <linux/gpio/consumer.h>
11#include <linux/module.h>
12#include <linux/slab.h>
13#include <linux/interrupt.h>
14#include <linux/usb.h>
15#include <linux/workqueue.h>
16
17#include <linux/regulator/consumer.h>
18
19#include <linux/usb/gadget.h>
20#include <linux/usb/otg.h>
21
22
23/*
24 * A simple GPIO VBUS sensing driver for B peripheral only devices
25 * with internal transceivers. It can control a D+ pullup GPIO and
26 * a regulator to limit the current drawn from VBUS.
27 *
28 * Needs to be loaded before the UDC driver that will use it.
29 */
30struct gpio_vbus_data {
31 struct gpio_desc *vbus_gpiod;
32 struct gpio_desc *pullup_gpiod;
33 struct usb_phy phy;
34 struct device *dev;
35 struct regulator *vbus_draw;
36 int vbus_draw_enabled;
37 unsigned mA;
38 struct delayed_work work;
39 int vbus;
40 int irq;
41};
42
43
44/*
45 * This driver relies on "both edges" triggering. VBUS has 100 msec to
46 * stabilize, so the peripheral controller driver may need to cope with
47 * some bouncing due to current surges (e.g. charging local capacitance)
48 * and contact chatter.
49 *
50 * REVISIT in desperate straits, toggling between rising and falling
51 * edges might be workable.
52 */
53#define VBUS_IRQ_FLAGS \
54 (IRQF_SHARED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)
55
56
57/* interface to regulator framework */
58static void set_vbus_draw(struct gpio_vbus_data *gpio_vbus, unsigned mA)
59{
60 struct regulator *vbus_draw = gpio_vbus->vbus_draw;
61 int enabled;
62 int ret;
63
64 if (!vbus_draw)
65 return;
66
67 enabled = gpio_vbus->vbus_draw_enabled;
68 if (mA) {
69 regulator_set_current_limit(vbus_draw, 0, 1000 * mA);
70 if (!enabled) {
71 ret = regulator_enable(vbus_draw);
72 if (ret < 0)
73 return;
74 gpio_vbus->vbus_draw_enabled = 1;
75 }
76 } else {
77 if (enabled) {
78 ret = regulator_disable(vbus_draw);
79 if (ret < 0)
80 return;
81 gpio_vbus->vbus_draw_enabled = 0;
82 }
83 }
84 gpio_vbus->mA = mA;
85}
86
87static int is_vbus_powered(struct gpio_vbus_data *gpio_vbus)
88{
89 return gpiod_get_value(gpio_vbus->vbus_gpiod);
90}
91
92static void gpio_vbus_work(struct work_struct *work)
93{
94 struct gpio_vbus_data *gpio_vbus =
95 container_of(work, struct gpio_vbus_data, work.work);
96 int status, vbus;
97
98 if (!gpio_vbus->phy.otg->gadget)
99 return;
100
101 vbus = is_vbus_powered(gpio_vbus);
102 if ((vbus ^ gpio_vbus->vbus) == 0)
103 return;
104 gpio_vbus->vbus = vbus;
105
106 /* Peripheral controllers which manage the pullup themselves won't have
107 * a pullup GPIO configured here. If it's configured here, we'll do
108 * what isp1301_omap::b_peripheral() does and enable the pullup here...
109 * although that may complicate usb_gadget_{,dis}connect() support.
110 */
111
112 if (vbus) {
113 status = USB_EVENT_VBUS;
114 gpio_vbus->phy.otg->state = OTG_STATE_B_PERIPHERAL;
115 gpio_vbus->phy.last_event = status;
116 usb_gadget_vbus_connect(gpio_vbus->phy.otg->gadget);
117
118 /* drawing a "unit load" is *always* OK, except for OTG */
119 set_vbus_draw(gpio_vbus, 100);
120
121 /* optionally enable D+ pullup */
122 if (gpio_vbus->pullup_gpiod)
123 gpiod_set_value(gpio_vbus->pullup_gpiod, 1);
124
125 atomic_notifier_call_chain(&gpio_vbus->phy.notifier,
126 status, gpio_vbus->phy.otg->gadget);
127 usb_phy_set_event(&gpio_vbus->phy, USB_EVENT_ENUMERATED);
128 } else {
129 /* optionally disable D+ pullup */
130 if (gpio_vbus->pullup_gpiod)
131 gpiod_set_value(gpio_vbus->pullup_gpiod, 0);
132
133 set_vbus_draw(gpio_vbus, 0);
134
135 usb_gadget_vbus_disconnect(gpio_vbus->phy.otg->gadget);
136 status = USB_EVENT_NONE;
137 gpio_vbus->phy.otg->state = OTG_STATE_B_IDLE;
138 gpio_vbus->phy.last_event = status;
139
140 atomic_notifier_call_chain(&gpio_vbus->phy.notifier,
141 status, gpio_vbus->phy.otg->gadget);
142 usb_phy_set_event(&gpio_vbus->phy, USB_EVENT_NONE);
143 }
144}
145
146/* VBUS change IRQ handler */
147static irqreturn_t gpio_vbus_irq(int irq, void *data)
148{
149 struct platform_device *pdev = data;
150 struct gpio_vbus_data *gpio_vbus = platform_get_drvdata(pdev);
151 struct usb_otg *otg = gpio_vbus->phy.otg;
152
153 dev_dbg(&pdev->dev, "VBUS %s (gadget: %s)\n",
154 is_vbus_powered(gpio_vbus) ? "supplied" : "inactive",
155 otg->gadget ? otg->gadget->name : "none");
156
157 if (otg->gadget)
158 schedule_delayed_work(&gpio_vbus->work, msecs_to_jiffies(100));
159
160 return IRQ_HANDLED;
161}
162
163/* OTG transceiver interface */
164
165/* bind/unbind the peripheral controller */
166static int gpio_vbus_set_peripheral(struct usb_otg *otg,
167 struct usb_gadget *gadget)
168{
169 struct gpio_vbus_data *gpio_vbus;
170 struct platform_device *pdev;
171
172 gpio_vbus = container_of(otg->usb_phy, struct gpio_vbus_data, phy);
173 pdev = to_platform_device(gpio_vbus->dev);
174
175 if (!gadget) {
176 dev_dbg(&pdev->dev, "unregistering gadget '%s'\n",
177 otg->gadget->name);
178
179 /* optionally disable D+ pullup */
180 if (gpio_vbus->pullup_gpiod)
181 gpiod_set_value(gpio_vbus->pullup_gpiod, 0);
182
183 set_vbus_draw(gpio_vbus, 0);
184
185 usb_gadget_vbus_disconnect(otg->gadget);
186 otg->state = OTG_STATE_UNDEFINED;
187
188 otg->gadget = NULL;
189 return 0;
190 }
191
192 otg->gadget = gadget;
193 dev_dbg(&pdev->dev, "registered gadget '%s'\n", gadget->name);
194
195 /* initialize connection state */
196 gpio_vbus->vbus = 0; /* start with disconnected */
197 gpio_vbus_irq(gpio_vbus->irq, pdev);
198 return 0;
199}
200
201/* effective for B devices, ignored for A-peripheral */
202static int gpio_vbus_set_power(struct usb_phy *phy, unsigned mA)
203{
204 struct gpio_vbus_data *gpio_vbus;
205
206 gpio_vbus = container_of(phy, struct gpio_vbus_data, phy);
207
208 if (phy->otg->state == OTG_STATE_B_PERIPHERAL)
209 set_vbus_draw(gpio_vbus, mA);
210 return 0;
211}
212
213/* for non-OTG B devices: set/clear transceiver suspend mode */
214static int gpio_vbus_set_suspend(struct usb_phy *phy, int suspend)
215{
216 struct gpio_vbus_data *gpio_vbus;
217
218 gpio_vbus = container_of(phy, struct gpio_vbus_data, phy);
219
220 /* draw max 0 mA from vbus in suspend mode; or the previously
221 * recorded amount of current if not suspended
222 *
223 * NOTE: high powered configs (mA > 100) may draw up to 2.5 mA
224 * if they're wake-enabled ... we don't handle that yet.
225 */
226 return gpio_vbus_set_power(phy, suspend ? 0 : gpio_vbus->mA);
227}
228
229/* platform driver interface */
230
231static int gpio_vbus_probe(struct platform_device *pdev)
232{
233 struct gpio_vbus_data *gpio_vbus;
234 struct resource *res;
235 struct device *dev = &pdev->dev;
236 int err, irq;
237 unsigned long irqflags;
238
239 gpio_vbus = devm_kzalloc(&pdev->dev, sizeof(struct gpio_vbus_data),
240 GFP_KERNEL);
241 if (!gpio_vbus)
242 return -ENOMEM;
243
244 gpio_vbus->phy.otg = devm_kzalloc(&pdev->dev, sizeof(struct usb_otg),
245 GFP_KERNEL);
246 if (!gpio_vbus->phy.otg)
247 return -ENOMEM;
248
249 platform_set_drvdata(pdev, gpio_vbus);
250 gpio_vbus->dev = &pdev->dev;
251 gpio_vbus->phy.label = "gpio-vbus";
252 gpio_vbus->phy.dev = gpio_vbus->dev;
253 gpio_vbus->phy.set_power = gpio_vbus_set_power;
254 gpio_vbus->phy.set_suspend = gpio_vbus_set_suspend;
255
256 gpio_vbus->phy.otg->state = OTG_STATE_UNDEFINED;
257 gpio_vbus->phy.otg->usb_phy = &gpio_vbus->phy;
258 gpio_vbus->phy.otg->set_peripheral = gpio_vbus_set_peripheral;
259
260 /* Look up the VBUS sensing GPIO */
261 gpio_vbus->vbus_gpiod = devm_gpiod_get(dev, "vbus", GPIOD_IN);
262 if (IS_ERR(gpio_vbus->vbus_gpiod)) {
263 err = PTR_ERR(gpio_vbus->vbus_gpiod);
264 dev_err(&pdev->dev, "can't request vbus gpio, err: %d\n", err);
265 return err;
266 }
267 gpiod_set_consumer_name(gpio_vbus->vbus_gpiod, "vbus_detect");
268
269 res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
270 if (res) {
271 irq = res->start;
272 irqflags = (res->flags & IRQF_TRIGGER_MASK) | IRQF_SHARED;
273 } else {
274 irq = gpiod_to_irq(gpio_vbus->vbus_gpiod);
275 irqflags = VBUS_IRQ_FLAGS;
276 }
277
278 gpio_vbus->irq = irq;
279
280 /*
281 * The VBUS sensing GPIO should have a pulldown, which will normally be
282 * part of a resistor ladder turning a 4.0V-5.25V level on VBUS into a
283 * value the GPIO detects as active. Some systems will use comparators.
284 * Get the optional D+ or D- pullup GPIO. If the data line pullup is
285 * in use, initialize it to "not pulling up"
286 */
287 gpio_vbus->pullup_gpiod = devm_gpiod_get_optional(dev, "pullup",
288 GPIOD_OUT_LOW);
289 if (IS_ERR(gpio_vbus->pullup_gpiod)) {
290 err = PTR_ERR(gpio_vbus->pullup_gpiod);
291 dev_err(&pdev->dev, "can't request pullup gpio, err: %d\n",
292 err);
293 return err;
294 }
295 if (gpio_vbus->pullup_gpiod)
296 gpiod_set_consumer_name(gpio_vbus->pullup_gpiod, "udc_pullup");
297
298 err = devm_request_irq(&pdev->dev, irq, gpio_vbus_irq, irqflags,
299 "vbus_detect", pdev);
300 if (err) {
301 dev_err(&pdev->dev, "can't request irq %i, err: %d\n",
302 irq, err);
303 return err;
304 }
305
306 INIT_DELAYED_WORK(&gpio_vbus->work, gpio_vbus_work);
307
308 gpio_vbus->vbus_draw = devm_regulator_get(&pdev->dev, "vbus_draw");
309 if (IS_ERR(gpio_vbus->vbus_draw)) {
310 dev_dbg(&pdev->dev, "can't get vbus_draw regulator, err: %ld\n",
311 PTR_ERR(gpio_vbus->vbus_draw));
312 gpio_vbus->vbus_draw = NULL;
313 }
314
315 /* only active when a gadget is registered */
316 err = usb_add_phy(&gpio_vbus->phy, USB_PHY_TYPE_USB2);
317 if (err) {
318 dev_err(&pdev->dev, "can't register transceiver, err: %d\n",
319 err);
320 return err;
321 }
322
323 /* TODO: wakeup could be enabled here with device_init_wakeup(dev, 1) */
324
325 return 0;
326}
327
328static int gpio_vbus_remove(struct platform_device *pdev)
329{
330 struct gpio_vbus_data *gpio_vbus = platform_get_drvdata(pdev);
331
332 device_init_wakeup(&pdev->dev, 0);
333 cancel_delayed_work_sync(&gpio_vbus->work);
334
335 usb_remove_phy(&gpio_vbus->phy);
336
337 return 0;
338}
339
340#ifdef CONFIG_PM
341static int gpio_vbus_pm_suspend(struct device *dev)
342{
343 struct gpio_vbus_data *gpio_vbus = dev_get_drvdata(dev);
344
345 if (device_may_wakeup(dev))
346 enable_irq_wake(gpio_vbus->irq);
347
348 return 0;
349}
350
351static int gpio_vbus_pm_resume(struct device *dev)
352{
353 struct gpio_vbus_data *gpio_vbus = dev_get_drvdata(dev);
354
355 if (device_may_wakeup(dev))
356 disable_irq_wake(gpio_vbus->irq);
357
358 return 0;
359}
360
361static const struct dev_pm_ops gpio_vbus_dev_pm_ops = {
362 .suspend = gpio_vbus_pm_suspend,
363 .resume = gpio_vbus_pm_resume,
364};
365#endif
366
367MODULE_ALIAS("platform:gpio-vbus");
368
369static struct platform_driver gpio_vbus_driver = {
370 .driver = {
371 .name = "gpio-vbus",
372#ifdef CONFIG_PM
373 .pm = &gpio_vbus_dev_pm_ops,
374#endif
375 },
376 .probe = gpio_vbus_probe,
377 .remove = gpio_vbus_remove,
378};
379
380module_platform_driver(gpio_vbus_driver);
381
382MODULE_DESCRIPTION("simple GPIO controlled OTG transceiver driver");
383MODULE_AUTHOR("Philipp Zabel");
384MODULE_LICENSE("GPL");
1/*
2 * gpio-vbus.c - simple GPIO VBUS sensing driver for B peripheral devices
3 *
4 * Copyright (c) 2008 Philipp Zabel <philipp.zabel@gmail.com>
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 */
10
11#include <linux/kernel.h>
12#include <linux/platform_device.h>
13#include <linux/gpio.h>
14#include <linux/module.h>
15#include <linux/slab.h>
16#include <linux/interrupt.h>
17#include <linux/usb.h>
18#include <linux/workqueue.h>
19
20#include <linux/regulator/consumer.h>
21
22#include <linux/usb/gadget.h>
23#include <linux/usb/gpio_vbus.h>
24#include <linux/usb/otg.h>
25
26
27/*
28 * A simple GPIO VBUS sensing driver for B peripheral only devices
29 * with internal transceivers. It can control a D+ pullup GPIO and
30 * a regulator to limit the current drawn from VBUS.
31 *
32 * Needs to be loaded before the UDC driver that will use it.
33 */
34struct gpio_vbus_data {
35 struct usb_phy phy;
36 struct device *dev;
37 struct regulator *vbus_draw;
38 int vbus_draw_enabled;
39 unsigned mA;
40 struct delayed_work work;
41 int vbus;
42 int irq;
43};
44
45
46/*
47 * This driver relies on "both edges" triggering. VBUS has 100 msec to
48 * stabilize, so the peripheral controller driver may need to cope with
49 * some bouncing due to current surges (e.g. charging local capacitance)
50 * and contact chatter.
51 *
52 * REVISIT in desperate straits, toggling between rising and falling
53 * edges might be workable.
54 */
55#define VBUS_IRQ_FLAGS \
56 (IRQF_SHARED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)
57
58
59/* interface to regulator framework */
60static void set_vbus_draw(struct gpio_vbus_data *gpio_vbus, unsigned mA)
61{
62 struct regulator *vbus_draw = gpio_vbus->vbus_draw;
63 int enabled;
64 int ret;
65
66 if (!vbus_draw)
67 return;
68
69 enabled = gpio_vbus->vbus_draw_enabled;
70 if (mA) {
71 regulator_set_current_limit(vbus_draw, 0, 1000 * mA);
72 if (!enabled) {
73 ret = regulator_enable(vbus_draw);
74 if (ret < 0)
75 return;
76 gpio_vbus->vbus_draw_enabled = 1;
77 }
78 } else {
79 if (enabled) {
80 ret = regulator_disable(vbus_draw);
81 if (ret < 0)
82 return;
83 gpio_vbus->vbus_draw_enabled = 0;
84 }
85 }
86 gpio_vbus->mA = mA;
87}
88
89static int is_vbus_powered(struct gpio_vbus_mach_info *pdata)
90{
91 int vbus;
92
93 vbus = gpio_get_value(pdata->gpio_vbus);
94 if (pdata->gpio_vbus_inverted)
95 vbus = !vbus;
96
97 return vbus;
98}
99
100static void gpio_vbus_work(struct work_struct *work)
101{
102 struct gpio_vbus_data *gpio_vbus =
103 container_of(work, struct gpio_vbus_data, work.work);
104 struct gpio_vbus_mach_info *pdata = dev_get_platdata(gpio_vbus->dev);
105 int gpio, status, vbus;
106
107 if (!gpio_vbus->phy.otg->gadget)
108 return;
109
110 vbus = is_vbus_powered(pdata);
111 if ((vbus ^ gpio_vbus->vbus) == 0)
112 return;
113 gpio_vbus->vbus = vbus;
114
115 /* Peripheral controllers which manage the pullup themselves won't have
116 * gpio_pullup configured here. If it's configured here, we'll do what
117 * isp1301_omap::b_peripheral() does and enable the pullup here... although
118 * that may complicate usb_gadget_{,dis}connect() support.
119 */
120 gpio = pdata->gpio_pullup;
121
122 if (vbus) {
123 status = USB_EVENT_VBUS;
124 gpio_vbus->phy.state = OTG_STATE_B_PERIPHERAL;
125 gpio_vbus->phy.last_event = status;
126 usb_gadget_vbus_connect(gpio_vbus->phy.otg->gadget);
127
128 /* drawing a "unit load" is *always* OK, except for OTG */
129 set_vbus_draw(gpio_vbus, 100);
130
131 /* optionally enable D+ pullup */
132 if (gpio_is_valid(gpio))
133 gpio_set_value(gpio, !pdata->gpio_pullup_inverted);
134
135 atomic_notifier_call_chain(&gpio_vbus->phy.notifier,
136 status, gpio_vbus->phy.otg->gadget);
137 } else {
138 /* optionally disable D+ pullup */
139 if (gpio_is_valid(gpio))
140 gpio_set_value(gpio, pdata->gpio_pullup_inverted);
141
142 set_vbus_draw(gpio_vbus, 0);
143
144 usb_gadget_vbus_disconnect(gpio_vbus->phy.otg->gadget);
145 status = USB_EVENT_NONE;
146 gpio_vbus->phy.state = OTG_STATE_B_IDLE;
147 gpio_vbus->phy.last_event = status;
148
149 atomic_notifier_call_chain(&gpio_vbus->phy.notifier,
150 status, gpio_vbus->phy.otg->gadget);
151 }
152}
153
154/* VBUS change IRQ handler */
155static irqreturn_t gpio_vbus_irq(int irq, void *data)
156{
157 struct platform_device *pdev = data;
158 struct gpio_vbus_mach_info *pdata = dev_get_platdata(&pdev->dev);
159 struct gpio_vbus_data *gpio_vbus = platform_get_drvdata(pdev);
160 struct usb_otg *otg = gpio_vbus->phy.otg;
161
162 dev_dbg(&pdev->dev, "VBUS %s (gadget: %s)\n",
163 is_vbus_powered(pdata) ? "supplied" : "inactive",
164 otg->gadget ? otg->gadget->name : "none");
165
166 if (otg->gadget)
167 schedule_delayed_work(&gpio_vbus->work, msecs_to_jiffies(100));
168
169 return IRQ_HANDLED;
170}
171
172/* OTG transceiver interface */
173
174/* bind/unbind the peripheral controller */
175static int gpio_vbus_set_peripheral(struct usb_otg *otg,
176 struct usb_gadget *gadget)
177{
178 struct gpio_vbus_data *gpio_vbus;
179 struct gpio_vbus_mach_info *pdata;
180 struct platform_device *pdev;
181 int gpio;
182
183 gpio_vbus = container_of(otg->phy, struct gpio_vbus_data, phy);
184 pdev = to_platform_device(gpio_vbus->dev);
185 pdata = dev_get_platdata(gpio_vbus->dev);
186 gpio = pdata->gpio_pullup;
187
188 if (!gadget) {
189 dev_dbg(&pdev->dev, "unregistering gadget '%s'\n",
190 otg->gadget->name);
191
192 /* optionally disable D+ pullup */
193 if (gpio_is_valid(gpio))
194 gpio_set_value(gpio, pdata->gpio_pullup_inverted);
195
196 set_vbus_draw(gpio_vbus, 0);
197
198 usb_gadget_vbus_disconnect(otg->gadget);
199 otg->phy->state = OTG_STATE_UNDEFINED;
200
201 otg->gadget = NULL;
202 return 0;
203 }
204
205 otg->gadget = gadget;
206 dev_dbg(&pdev->dev, "registered gadget '%s'\n", gadget->name);
207
208 /* initialize connection state */
209 gpio_vbus->vbus = 0; /* start with disconnected */
210 gpio_vbus_irq(gpio_vbus->irq, pdev);
211 return 0;
212}
213
214/* effective for B devices, ignored for A-peripheral */
215static int gpio_vbus_set_power(struct usb_phy *phy, unsigned mA)
216{
217 struct gpio_vbus_data *gpio_vbus;
218
219 gpio_vbus = container_of(phy, struct gpio_vbus_data, phy);
220
221 if (phy->state == OTG_STATE_B_PERIPHERAL)
222 set_vbus_draw(gpio_vbus, mA);
223 return 0;
224}
225
226/* for non-OTG B devices: set/clear transceiver suspend mode */
227static int gpio_vbus_set_suspend(struct usb_phy *phy, int suspend)
228{
229 struct gpio_vbus_data *gpio_vbus;
230
231 gpio_vbus = container_of(phy, struct gpio_vbus_data, phy);
232
233 /* draw max 0 mA from vbus in suspend mode; or the previously
234 * recorded amount of current if not suspended
235 *
236 * NOTE: high powered configs (mA > 100) may draw up to 2.5 mA
237 * if they're wake-enabled ... we don't handle that yet.
238 */
239 return gpio_vbus_set_power(phy, suspend ? 0 : gpio_vbus->mA);
240}
241
242/* platform driver interface */
243
244static int gpio_vbus_probe(struct platform_device *pdev)
245{
246 struct gpio_vbus_mach_info *pdata = dev_get_platdata(&pdev->dev);
247 struct gpio_vbus_data *gpio_vbus;
248 struct resource *res;
249 int err, gpio, irq;
250 unsigned long irqflags;
251
252 if (!pdata || !gpio_is_valid(pdata->gpio_vbus))
253 return -EINVAL;
254 gpio = pdata->gpio_vbus;
255
256 gpio_vbus = kzalloc(sizeof(struct gpio_vbus_data), GFP_KERNEL);
257 if (!gpio_vbus)
258 return -ENOMEM;
259
260 gpio_vbus->phy.otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL);
261 if (!gpio_vbus->phy.otg) {
262 kfree(gpio_vbus);
263 return -ENOMEM;
264 }
265
266 platform_set_drvdata(pdev, gpio_vbus);
267 gpio_vbus->dev = &pdev->dev;
268 gpio_vbus->phy.label = "gpio-vbus";
269 gpio_vbus->phy.dev = gpio_vbus->dev;
270 gpio_vbus->phy.set_power = gpio_vbus_set_power;
271 gpio_vbus->phy.set_suspend = gpio_vbus_set_suspend;
272 gpio_vbus->phy.state = OTG_STATE_UNDEFINED;
273
274 gpio_vbus->phy.otg->phy = &gpio_vbus->phy;
275 gpio_vbus->phy.otg->set_peripheral = gpio_vbus_set_peripheral;
276
277 err = gpio_request(gpio, "vbus_detect");
278 if (err) {
279 dev_err(&pdev->dev, "can't request vbus gpio %d, err: %d\n",
280 gpio, err);
281 goto err_gpio;
282 }
283 gpio_direction_input(gpio);
284
285 res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
286 if (res) {
287 irq = res->start;
288 irqflags = (res->flags & IRQF_TRIGGER_MASK) | IRQF_SHARED;
289 } else {
290 irq = gpio_to_irq(gpio);
291 irqflags = VBUS_IRQ_FLAGS;
292 }
293
294 gpio_vbus->irq = irq;
295
296 /* if data line pullup is in use, initialize it to "not pulling up" */
297 gpio = pdata->gpio_pullup;
298 if (gpio_is_valid(gpio)) {
299 err = gpio_request(gpio, "udc_pullup");
300 if (err) {
301 dev_err(&pdev->dev,
302 "can't request pullup gpio %d, err: %d\n",
303 gpio, err);
304 gpio_free(pdata->gpio_vbus);
305 goto err_gpio;
306 }
307 gpio_direction_output(gpio, pdata->gpio_pullup_inverted);
308 }
309
310 err = request_irq(irq, gpio_vbus_irq, irqflags, "vbus_detect", pdev);
311 if (err) {
312 dev_err(&pdev->dev, "can't request irq %i, err: %d\n",
313 irq, err);
314 goto err_irq;
315 }
316
317 INIT_DELAYED_WORK(&gpio_vbus->work, gpio_vbus_work);
318
319 gpio_vbus->vbus_draw = regulator_get(&pdev->dev, "vbus_draw");
320 if (IS_ERR(gpio_vbus->vbus_draw)) {
321 dev_dbg(&pdev->dev, "can't get vbus_draw regulator, err: %ld\n",
322 PTR_ERR(gpio_vbus->vbus_draw));
323 gpio_vbus->vbus_draw = NULL;
324 }
325
326 /* only active when a gadget is registered */
327 err = usb_add_phy(&gpio_vbus->phy, USB_PHY_TYPE_USB2);
328 if (err) {
329 dev_err(&pdev->dev, "can't register transceiver, err: %d\n",
330 err);
331 goto err_otg;
332 }
333
334 device_init_wakeup(&pdev->dev, pdata->wakeup);
335
336 return 0;
337err_otg:
338 regulator_put(gpio_vbus->vbus_draw);
339 free_irq(irq, pdev);
340err_irq:
341 if (gpio_is_valid(pdata->gpio_pullup))
342 gpio_free(pdata->gpio_pullup);
343 gpio_free(pdata->gpio_vbus);
344err_gpio:
345 kfree(gpio_vbus->phy.otg);
346 kfree(gpio_vbus);
347 return err;
348}
349
350static int gpio_vbus_remove(struct platform_device *pdev)
351{
352 struct gpio_vbus_data *gpio_vbus = platform_get_drvdata(pdev);
353 struct gpio_vbus_mach_info *pdata = dev_get_platdata(&pdev->dev);
354 int gpio = pdata->gpio_vbus;
355
356 device_init_wakeup(&pdev->dev, 0);
357 cancel_delayed_work_sync(&gpio_vbus->work);
358 regulator_put(gpio_vbus->vbus_draw);
359
360 usb_remove_phy(&gpio_vbus->phy);
361
362 free_irq(gpio_vbus->irq, pdev);
363 if (gpio_is_valid(pdata->gpio_pullup))
364 gpio_free(pdata->gpio_pullup);
365 gpio_free(gpio);
366 kfree(gpio_vbus->phy.otg);
367 kfree(gpio_vbus);
368
369 return 0;
370}
371
372#ifdef CONFIG_PM
373static int gpio_vbus_pm_suspend(struct device *dev)
374{
375 struct gpio_vbus_data *gpio_vbus = dev_get_drvdata(dev);
376
377 if (device_may_wakeup(dev))
378 enable_irq_wake(gpio_vbus->irq);
379
380 return 0;
381}
382
383static int gpio_vbus_pm_resume(struct device *dev)
384{
385 struct gpio_vbus_data *gpio_vbus = dev_get_drvdata(dev);
386
387 if (device_may_wakeup(dev))
388 disable_irq_wake(gpio_vbus->irq);
389
390 return 0;
391}
392
393static const struct dev_pm_ops gpio_vbus_dev_pm_ops = {
394 .suspend = gpio_vbus_pm_suspend,
395 .resume = gpio_vbus_pm_resume,
396};
397#endif
398
399MODULE_ALIAS("platform:gpio-vbus");
400
401static struct platform_driver gpio_vbus_driver = {
402 .driver = {
403 .name = "gpio-vbus",
404 .owner = THIS_MODULE,
405#ifdef CONFIG_PM
406 .pm = &gpio_vbus_dev_pm_ops,
407#endif
408 },
409 .probe = gpio_vbus_probe,
410 .remove = gpio_vbus_remove,
411};
412
413module_platform_driver(gpio_vbus_driver);
414
415MODULE_DESCRIPTION("simple GPIO controlled OTG transceiver driver");
416MODULE_AUTHOR("Philipp Zabel");
417MODULE_LICENSE("GPL");