Loading...
1# SPDX-License-Identifier: GPL-2.0
2
3menu "Bluetooth device drivers"
4 depends on BT
5
6config BT_INTEL
7 tristate
8 select REGMAP
9
10config BT_BCM
11 tristate
12 select FW_LOADER
13
14config BT_RTL
15 tristate
16 select FW_LOADER
17
18config BT_QCA
19 tristate
20 select FW_LOADER
21
22config BT_HCIBTUSB
23 tristate "HCI USB driver"
24 depends on USB
25 select BT_INTEL
26 help
27 Bluetooth HCI USB driver.
28 This driver is required if you want to use Bluetooth devices with
29 USB interface.
30
31 Say Y here to compile support for Bluetooth USB devices into the
32 kernel or say M to compile it as module (btusb).
33
34config BT_HCIBTUSB_AUTOSUSPEND
35 bool "Enable USB autosuspend for Bluetooth USB devices by default"
36 depends on BT_HCIBTUSB
37 help
38 Say Y here to enable USB autosuspend for Bluetooth USB devices by
39 default.
40
41 This can be overridden by passing btusb.enable_autosuspend=[y|n]
42 on the kernel commandline.
43
44config BT_HCIBTUSB_BCM
45 bool "Broadcom protocol support"
46 depends on BT_HCIBTUSB
47 select BT_BCM
48 default y
49 help
50 The Broadcom protocol support enables firmware and patchram
51 download support for Broadcom Bluetooth controllers.
52
53 Say Y here to compile support for Broadcom protocol.
54
55config BT_HCIBTUSB_MTK
56 bool "MediaTek protocol support"
57 depends on BT_HCIBTUSB
58 default n
59 help
60 The MediaTek protocol support enables firmware download
61 support and chip initialization for MediaTek Bluetooth
62 USB controllers.
63
64 Say Y here to compile support for MediaTek protocol.
65
66config BT_HCIBTUSB_RTL
67 bool "Realtek protocol support"
68 depends on BT_HCIBTUSB
69 select BT_RTL
70 default y
71 help
72 The Realtek protocol support enables firmware and configuration
73 download support for Realtek Bluetooth controllers.
74
75 Say Y here to compile support for Realtek protocol.
76
77config BT_HCIBTSDIO
78 tristate "HCI SDIO driver"
79 depends on MMC
80 help
81 Bluetooth HCI SDIO driver.
82 This driver is required if you want to use Bluetooth device with
83 SDIO interface.
84
85 Say Y here to compile support for Bluetooth SDIO devices into the
86 kernel or say M to compile it as module (btsdio).
87
88config BT_HCIUART
89 tristate "HCI UART driver"
90 depends on SERIAL_DEV_BUS || !SERIAL_DEV_BUS
91 depends on NVMEM || !NVMEM
92 depends on TTY
93 help
94 Bluetooth HCI UART driver.
95 This driver is required if you want to use Bluetooth devices with
96 serial port interface. You will also need this driver if you have
97 UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card
98 adapter and BrainBoxes Bluetooth PC Card.
99
100 Say Y here to compile support for Bluetooth UART devices into the
101 kernel or say M to compile it as module (hci_uart).
102
103config BT_HCIUART_SERDEV
104 bool
105 depends on SERIAL_DEV_BUS && BT_HCIUART
106 default y
107
108config BT_HCIUART_H4
109 bool "UART (H4) protocol support"
110 depends on BT_HCIUART
111 help
112 UART (H4) is serial protocol for communication between Bluetooth
113 device and host. This protocol is required for most Bluetooth devices
114 with UART interface, including PCMCIA and CF cards.
115
116 Say Y here to compile support for HCI UART (H4) protocol.
117
118config BT_HCIUART_NOKIA
119 tristate "UART Nokia H4+ protocol support"
120 depends on BT_HCIUART
121 depends on BT_HCIUART_SERDEV
122 depends on GPIOLIB
123 depends on PM
124 select BT_HCIUART_H4
125 select BT_BCM
126 help
127 Nokia H4+ is serial protocol for communication between Bluetooth
128 device and host. This protocol is required for Bluetooth devices
129 with UART interface in Nokia devices.
130
131 Say Y here to compile support for Nokia's H4+ protocol.
132
133config BT_HCIUART_BCSP
134 bool "BCSP protocol support"
135 depends on BT_HCIUART
136 select BITREVERSE
137 help
138 BCSP (BlueCore Serial Protocol) is serial protocol for communication
139 between Bluetooth device and host. This protocol is required for non
140 USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
141 CF cards.
142
143 Say Y here to compile support for HCI BCSP protocol.
144
145config BT_HCIUART_ATH3K
146 bool "Atheros AR300x serial support"
147 depends on BT_HCIUART
148 select BT_HCIUART_H4
149 help
150 HCIATH3K (HCI Atheros AR300x) is a serial protocol for
151 communication between host and Atheros AR300x Bluetooth devices.
152 This protocol enables AR300x chips to be enabled with
153 power management support.
154 Enable this if you have Atheros AR300x serial Bluetooth device.
155
156 Say Y here to compile support for HCI UART ATH3K protocol.
157
158config BT_HCIUART_LL
159 bool "HCILL protocol support"
160 depends on BT_HCIUART_SERDEV
161 select BT_HCIUART_H4
162 help
163 HCILL (HCI Low Level) is a serial protocol for communication
164 between Bluetooth device and host. This protocol is required for
165 serial Bluetooth devices that are based on Texas Instruments'
166 BRF chips.
167
168 Say Y here to compile support for HCILL protocol.
169
170config BT_HCIUART_3WIRE
171 bool "Three-wire UART (H5) protocol support"
172 depends on BT_HCIUART
173 depends on BT_HCIUART_SERDEV
174 help
175 The HCI Three-wire UART Transport Layer makes it possible to
176 user the Bluetooth HCI over a serial port interface. The HCI
177 Three-wire UART Transport Layer assumes that the UART
178 communication may have bit errors, overrun errors or burst
179 errors and thereby making CTS/RTS lines unnecessary.
180
181 Say Y here to compile support for Three-wire UART protocol.
182
183config BT_HCIUART_INTEL
184 bool "Intel protocol support"
185 depends on BT_HCIUART
186 depends on GPIOLIB
187 select BT_HCIUART_H4
188 select BT_INTEL
189 help
190 The Intel protocol support enables Bluetooth HCI over serial
191 port interface for Intel Bluetooth controllers.
192
193 Say Y here to compile support for Intel protocol.
194
195config BT_HCIUART_BCM
196 bool "Broadcom protocol support"
197 depends on BT_HCIUART
198 depends on BT_HCIUART_SERDEV
199 depends on (!ACPI || SERIAL_DEV_CTRL_TTYPORT)
200 depends on GPIOLIB
201 select BT_HCIUART_H4
202 select BT_BCM
203 help
204 The Broadcom protocol support enables Bluetooth HCI over serial
205 port interface for Broadcom Bluetooth controllers.
206
207 Say Y here to compile support for Broadcom protocol.
208
209config BT_HCIUART_RTL
210 bool "Realtek protocol support"
211 depends on BT_HCIUART
212 depends on BT_HCIUART_SERDEV
213 depends on GPIOLIB
214 depends on (ACPI || SERIAL_DEV_CTRL_TTYPORT)
215 select BT_HCIUART_3WIRE
216 select BT_RTL
217 help
218 The Realtek protocol support enables Bluetooth HCI over 3-Wire
219 serial port interface for Realtek Bluetooth controllers.
220
221 Say Y here to compile support for Realtek protocol.
222
223config BT_HCIUART_QCA
224 bool "Qualcomm Atheros protocol support"
225 depends on BT_HCIUART
226 depends on BT_HCIUART_SERDEV
227 select BT_HCIUART_H4
228 select BT_QCA
229 help
230 The Qualcomm Atheros protocol supports HCI In-Band Sleep feature
231 over serial port interface(H4) between controller and host.
232 This protocol is required for UART clock control for QCA Bluetooth
233 devices.
234
235 Say Y here to compile support for QCA protocol.
236
237config BT_HCIUART_AG6XX
238 bool "Intel AG6XX protocol support"
239 depends on BT_HCIUART
240 select BT_HCIUART_H4
241 select BT_INTEL
242 help
243 The Intel/AG6XX protocol support enables Bluetooth HCI over serial
244 port interface for Intel ibt 2.1 Bluetooth controllers.
245
246 Say Y here to compile support for Intel AG6XX protocol.
247
248config BT_HCIUART_MRVL
249 bool "Marvell protocol support"
250 depends on BT_HCIUART
251 depends on BT_HCIUART_SERDEV
252 select BT_HCIUART_H4
253 help
254 Marvell is serial protocol for communication between Bluetooth
255 device and host. This protocol is required for most Marvell Bluetooth
256 devices with UART interface.
257
258 Say Y here to compile support for HCI MRVL protocol.
259
260config BT_HCIBCM203X
261 tristate "HCI BCM203x USB driver"
262 depends on USB
263 select FW_LOADER
264 help
265 Bluetooth HCI BCM203x USB driver.
266 This driver provides the firmware loading mechanism for the Broadcom
267 Blutonium based devices.
268
269 Say Y here to compile support for HCI BCM203x devices into the
270 kernel or say M to compile it as module (bcm203x).
271
272config BT_HCIBPA10X
273 tristate "HCI BPA10x USB driver"
274 depends on USB
275 help
276 Bluetooth HCI BPA10x USB driver.
277 This driver provides support for the Digianswer BPA 100/105 Bluetooth
278 sniffer devices.
279
280 Say Y here to compile support for HCI BPA10x devices into the
281 kernel or say M to compile it as module (bpa10x).
282
283config BT_HCIBFUSB
284 tristate "HCI BlueFRITZ! USB driver"
285 depends on USB
286 select FW_LOADER
287 help
288 Bluetooth HCI BlueFRITZ! USB driver.
289 This driver provides support for Bluetooth USB devices with AVM
290 interface:
291 AVM BlueFRITZ! USB
292
293 Say Y here to compile support for HCI BFUSB devices into the
294 kernel or say M to compile it as module (bfusb).
295
296config BT_HCIDTL1
297 tristate "HCI DTL1 (PC Card) driver"
298 depends on PCMCIA
299 help
300 Bluetooth HCI DTL1 (PC Card) driver.
301 This driver provides support for Bluetooth PCMCIA devices with
302 Nokia DTL1 interface:
303 Nokia Bluetooth Card
304 Socket Bluetooth CF Card
305
306 Say Y here to compile support for HCI DTL1 devices into the
307 kernel or say M to compile it as module (dtl1_cs).
308
309config BT_HCIBT3C
310 tristate "HCI BT3C (PC Card) driver"
311 depends on PCMCIA
312 select FW_LOADER
313 help
314 Bluetooth HCI BT3C (PC Card) driver.
315 This driver provides support for Bluetooth PCMCIA devices with
316 3Com BT3C interface:
317 3Com Bluetooth Card (3CRWB6096)
318 HP Bluetooth Card
319
320 Say Y here to compile support for HCI BT3C devices into the
321 kernel or say M to compile it as module (bt3c_cs).
322
323config BT_HCIBLUECARD
324 tristate "HCI BlueCard (PC Card) driver"
325 depends on PCMCIA
326 help
327 Bluetooth HCI BlueCard (PC Card) driver.
328 This driver provides support for Bluetooth PCMCIA devices with
329 Anycom BlueCard interface:
330 Anycom Bluetooth PC Card
331 Anycom Bluetooth CF Card
332
333 Say Y here to compile support for HCI BlueCard devices into the
334 kernel or say M to compile it as module (bluecard_cs).
335
336config BT_HCIVHCI
337 tristate "HCI VHCI (Virtual HCI device) driver"
338 help
339 Bluetooth Virtual HCI device driver.
340 This driver is required if you want to use HCI Emulation software.
341
342 Say Y here to compile support for virtual HCI devices into the
343 kernel or say M to compile it as module (hci_vhci).
344
345config BT_MRVL
346 tristate "Marvell Bluetooth driver support"
347 help
348 The core driver to support Marvell Bluetooth devices.
349
350 This driver is required if you want to support
351 Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897/8977/8987/8997.
352
353 Say Y here to compile Marvell Bluetooth driver
354 into the kernel or say M to compile it as module.
355
356config BT_MRVL_SDIO
357 tristate "Marvell BT-over-SDIO driver"
358 depends on BT_MRVL && MMC
359 select FW_LOADER
360 select WANT_DEV_COREDUMP
361 help
362 The driver for Marvell Bluetooth chipsets with SDIO interface.
363
364 This driver is required if you want to use Marvell Bluetooth
365 devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897/SD8977/SD8987/SD8997
366 chipsets are supported.
367
368 Say Y here to compile support for Marvell BT-over-SDIO driver
369 into the kernel or say M to compile it as module.
370
371config BT_ATH3K
372 tristate "Atheros firmware download driver"
373 depends on BT_HCIBTUSB
374 select FW_LOADER
375 help
376 Bluetooth firmware download driver.
377 This driver loads the firmware into the Atheros Bluetooth
378 chipset.
379
380 Say Y here to compile support for "Atheros firmware download driver"
381 into the kernel or say M to compile it as module (ath3k).
382
383config BT_MTKSDIO
384 tristate "MediaTek HCI SDIO driver"
385 depends on MMC
386 help
387 MediaTek Bluetooth HCI SDIO driver.
388 This driver is required if you want to use MediaTek Bluetooth
389 with SDIO interface.
390
391 Say Y here to compile support for MediaTek Bluetooth SDIO devices
392 into the kernel or say M to compile it as module (btmtksdio).
393
394config BT_MTKUART
395 tristate "MediaTek HCI UART driver"
396 depends on SERIAL_DEV_BUS
397 help
398 MediaTek Bluetooth HCI UART driver.
399 This driver is required if you want to use MediaTek Bluetooth
400 with serial interface.
401
402 Say Y here to compile support for MediaTek Bluetooth UART devices
403 into the kernel or say M to compile it as module (btmtkuart).
404
405config BT_QCOMSMD
406 tristate "Qualcomm SMD based HCI support"
407 depends on RPMSG || (COMPILE_TEST && RPMSG=n)
408 depends on QCOM_WCNSS_CTRL || (COMPILE_TEST && QCOM_WCNSS_CTRL=n)
409 select BT_QCA
410 help
411 Qualcomm SMD based HCI driver.
412 This driver is used to bridge HCI data onto the shared memory
413 channels to the WCNSS core.
414
415 Say Y here to compile support for HCI over Qualcomm SMD into the
416 kernel or say M to compile as a module.
417
418config BT_HCIRSI
419 tristate
420 help
421 Redpine BT driver.
422 This driver handles BT traffic from upper layers and pass
423 to the RSI_91x coex module for further scheduling to device
424
425 Say Y here to compile support for HCI over Redpine into the
426 kernel or say M to compile as a module.
427
428endmenu
1
2menu "Bluetooth device drivers"
3 depends on BT
4
5config BT_HCIBTUSB
6 tristate "HCI USB driver"
7 depends on USB
8 help
9 Bluetooth HCI USB driver.
10 This driver is required if you want to use Bluetooth devices with
11 USB interface.
12
13 Say Y here to compile support for Bluetooth USB devices into the
14 kernel or say M to compile it as module (btusb).
15
16config BT_HCIBTSDIO
17 tristate "HCI SDIO driver"
18 depends on MMC
19 help
20 Bluetooth HCI SDIO driver.
21 This driver is required if you want to use Bluetooth device with
22 SDIO interface.
23
24 Say Y here to compile support for Bluetooth SDIO devices into the
25 kernel or say M to compile it as module (btsdio).
26
27config BT_HCIUART
28 tristate "HCI UART driver"
29 help
30 Bluetooth HCI UART driver.
31 This driver is required if you want to use Bluetooth devices with
32 serial port interface. You will also need this driver if you have
33 UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card
34 adapter and BrainBoxes Bluetooth PC Card.
35
36 Say Y here to compile support for Bluetooth UART devices into the
37 kernel or say M to compile it as module (hci_uart).
38
39config BT_HCIUART_H4
40 bool "UART (H4) protocol support"
41 depends on BT_HCIUART
42 help
43 UART (H4) is serial protocol for communication between Bluetooth
44 device and host. This protocol is required for most Bluetooth devices
45 with UART interface, including PCMCIA and CF cards.
46
47 Say Y here to compile support for HCI UART (H4) protocol.
48
49config BT_HCIUART_BCSP
50 bool "BCSP protocol support"
51 depends on BT_HCIUART
52 select BITREVERSE
53 help
54 BCSP (BlueCore Serial Protocol) is serial protocol for communication
55 between Bluetooth device and host. This protocol is required for non
56 USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
57 CF cards.
58
59 Say Y here to compile support for HCI BCSP protocol.
60
61config BT_HCIUART_ATH3K
62 bool "Atheros AR300x serial support"
63 depends on BT_HCIUART
64 help
65 HCIATH3K (HCI Atheros AR300x) is a serial protocol for
66 communication between host and Atheros AR300x Bluetooth devices.
67 This protocol enables AR300x chips to be enabled with
68 power management support.
69 Enable this if you have Atheros AR300x serial Bluetooth device.
70
71 Say Y here to compile support for HCI UART ATH3K protocol.
72
73config BT_HCIUART_LL
74 bool "HCILL protocol support"
75 depends on BT_HCIUART
76 help
77 HCILL (HCI Low Level) is a serial protocol for communication
78 between Bluetooth device and host. This protocol is required for
79 serial Bluetooth devices that are based on Texas Instruments'
80 BRF chips.
81
82 Say Y here to compile support for HCILL protocol.
83
84config BT_HCIBCM203X
85 tristate "HCI BCM203x USB driver"
86 depends on USB
87 select FW_LOADER
88 help
89 Bluetooth HCI BCM203x USB driver.
90 This driver provides the firmware loading mechanism for the Broadcom
91 Blutonium based devices.
92
93 Say Y here to compile support for HCI BCM203x devices into the
94 kernel or say M to compile it as module (bcm203x).
95
96config BT_HCIBPA10X
97 tristate "HCI BPA10x USB driver"
98 depends on USB
99 help
100 Bluetooth HCI BPA10x USB driver.
101 This driver provides support for the Digianswer BPA 100/105 Bluetooth
102 sniffer devices.
103
104 Say Y here to compile support for HCI BPA10x devices into the
105 kernel or say M to compile it as module (bpa10x).
106
107config BT_HCIBFUSB
108 tristate "HCI BlueFRITZ! USB driver"
109 depends on USB
110 select FW_LOADER
111 help
112 Bluetooth HCI BlueFRITZ! USB driver.
113 This driver provides support for Bluetooth USB devices with AVM
114 interface:
115 AVM BlueFRITZ! USB
116
117 Say Y here to compile support for HCI BFUSB devices into the
118 kernel or say M to compile it as module (bfusb).
119
120config BT_HCIDTL1
121 tristate "HCI DTL1 (PC Card) driver"
122 depends on PCMCIA
123 help
124 Bluetooth HCI DTL1 (PC Card) driver.
125 This driver provides support for Bluetooth PCMCIA devices with
126 Nokia DTL1 interface:
127 Nokia Bluetooth Card
128 Socket Bluetooth CF Card
129
130 Say Y here to compile support for HCI DTL1 devices into the
131 kernel or say M to compile it as module (dtl1_cs).
132
133config BT_HCIBT3C
134 tristate "HCI BT3C (PC Card) driver"
135 depends on PCMCIA
136 select FW_LOADER
137 help
138 Bluetooth HCI BT3C (PC Card) driver.
139 This driver provides support for Bluetooth PCMCIA devices with
140 3Com BT3C interface:
141 3Com Bluetooth Card (3CRWB6096)
142 HP Bluetooth Card
143
144 Say Y here to compile support for HCI BT3C devices into the
145 kernel or say M to compile it as module (bt3c_cs).
146
147config BT_HCIBLUECARD
148 tristate "HCI BlueCard (PC Card) driver"
149 depends on PCMCIA
150 help
151 Bluetooth HCI BlueCard (PC Card) driver.
152 This driver provides support for Bluetooth PCMCIA devices with
153 Anycom BlueCard interface:
154 Anycom Bluetooth PC Card
155 Anycom Bluetooth CF Card
156
157 Say Y here to compile support for HCI BlueCard devices into the
158 kernel or say M to compile it as module (bluecard_cs).
159
160config BT_HCIBTUART
161 tristate "HCI UART (PC Card) device driver"
162 depends on PCMCIA
163 help
164 Bluetooth HCI UART (PC Card) driver.
165 This driver provides support for Bluetooth PCMCIA devices with
166 an UART interface:
167 Xircom CreditCard Bluetooth Adapter
168 Xircom RealPort2 Bluetooth Adapter
169 Sphinx PICO Card
170 H-Soft blue+Card
171 Cyber-blue Compact Flash Card
172
173 Say Y here to compile support for HCI UART devices into the
174 kernel or say M to compile it as module (btuart_cs).
175
176config BT_HCIVHCI
177 tristate "HCI VHCI (Virtual HCI device) driver"
178 help
179 Bluetooth Virtual HCI device driver.
180 This driver is required if you want to use HCI Emulation software.
181
182 Say Y here to compile support for virtual HCI devices into the
183 kernel or say M to compile it as module (hci_vhci).
184
185config BT_MRVL
186 tristate "Marvell Bluetooth driver support"
187 help
188 The core driver to support Marvell Bluetooth devices.
189
190 This driver is required if you want to support
191 Marvell Bluetooth devices, such as 8688/8787.
192
193 Say Y here to compile Marvell Bluetooth driver
194 into the kernel or say M to compile it as module.
195
196config BT_MRVL_SDIO
197 tristate "Marvell BT-over-SDIO driver"
198 depends on BT_MRVL && MMC
199 select FW_LOADER
200 help
201 The driver for Marvell Bluetooth chipsets with SDIO interface.
202
203 This driver is required if you want to use Marvell Bluetooth
204 devices with SDIO interface. Currently SD8688/SD8787 chipsets are
205 supported.
206
207 Say Y here to compile support for Marvell BT-over-SDIO driver
208 into the kernel or say M to compile it as module.
209
210config BT_ATH3K
211 tristate "Atheros firmware download driver"
212 depends on BT_HCIBTUSB
213 select FW_LOADER
214 help
215 Bluetooth firmware download driver.
216 This driver loads the firmware into the Atheros Bluetooth
217 chipset.
218
219 Say Y here to compile support for "Atheros firmware download driver"
220 into the kernel or say M to compile it as module (ath3k).
221
222config BT_WILINK
223 tristate "Texas Instruments WiLink7 driver"
224 depends on TI_ST
225 help
226 This enables the Bluetooth driver for Texas Instrument's BT/FM/GPS
227 combo devices. This makes use of shared transport line discipline
228 core driver to communicate with the BT core of the combo chip.
229
230 Say Y here to compile support for Texas Instrument's WiLink7 driver
231 into the kernel or say M to compile it as module.
232endmenu