Loading...
1# SPDX-License-Identifier: GPL-2.0
2
3menu "Bluetooth device drivers"
4 depends on BT
5
6config BT_INTEL
7 tristate
8 select REGMAP
9
10config BT_BCM
11 tristate
12 select FW_LOADER
13
14config BT_RTL
15 tristate
16 select FW_LOADER
17
18config BT_QCA
19 tristate
20 select FW_LOADER
21
22config BT_HCIBTUSB
23 tristate "HCI USB driver"
24 depends on USB
25 select BT_INTEL
26 help
27 Bluetooth HCI USB driver.
28 This driver is required if you want to use Bluetooth devices with
29 USB interface.
30
31 Say Y here to compile support for Bluetooth USB devices into the
32 kernel or say M to compile it as module (btusb).
33
34config BT_HCIBTUSB_AUTOSUSPEND
35 bool "Enable USB autosuspend for Bluetooth USB devices by default"
36 depends on BT_HCIBTUSB
37 help
38 Say Y here to enable USB autosuspend for Bluetooth USB devices by
39 default.
40
41 This can be overridden by passing btusb.enable_autosuspend=[y|n]
42 on the kernel commandline.
43
44config BT_HCIBTUSB_BCM
45 bool "Broadcom protocol support"
46 depends on BT_HCIBTUSB
47 select BT_BCM
48 default y
49 help
50 The Broadcom protocol support enables firmware and patchram
51 download support for Broadcom Bluetooth controllers.
52
53 Say Y here to compile support for Broadcom protocol.
54
55config BT_HCIBTUSB_MTK
56 bool "MediaTek protocol support"
57 depends on BT_HCIBTUSB
58 default n
59 help
60 The MediaTek protocol support enables firmware download
61 support and chip initialization for MediaTek Bluetooth
62 USB controllers.
63
64 Say Y here to compile support for MediaTek protocol.
65
66config BT_HCIBTUSB_RTL
67 bool "Realtek protocol support"
68 depends on BT_HCIBTUSB
69 select BT_RTL
70 default y
71 help
72 The Realtek protocol support enables firmware and configuration
73 download support for Realtek Bluetooth controllers.
74
75 Say Y here to compile support for Realtek protocol.
76
77config BT_HCIBTSDIO
78 tristate "HCI SDIO driver"
79 depends on MMC
80 help
81 Bluetooth HCI SDIO driver.
82 This driver is required if you want to use Bluetooth device with
83 SDIO interface.
84
85 Say Y here to compile support for Bluetooth SDIO devices into the
86 kernel or say M to compile it as module (btsdio).
87
88config BT_HCIUART
89 tristate "HCI UART driver"
90 depends on SERIAL_DEV_BUS || !SERIAL_DEV_BUS
91 depends on NVMEM || !NVMEM
92 depends on TTY
93 help
94 Bluetooth HCI UART driver.
95 This driver is required if you want to use Bluetooth devices with
96 serial port interface. You will also need this driver if you have
97 UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card
98 adapter and BrainBoxes Bluetooth PC Card.
99
100 Say Y here to compile support for Bluetooth UART devices into the
101 kernel or say M to compile it as module (hci_uart).
102
103config BT_HCIUART_SERDEV
104 bool
105 depends on SERIAL_DEV_BUS && BT_HCIUART
106 default y
107
108config BT_HCIUART_H4
109 bool "UART (H4) protocol support"
110 depends on BT_HCIUART
111 help
112 UART (H4) is serial protocol for communication between Bluetooth
113 device and host. This protocol is required for most Bluetooth devices
114 with UART interface, including PCMCIA and CF cards.
115
116 Say Y here to compile support for HCI UART (H4) protocol.
117
118config BT_HCIUART_NOKIA
119 tristate "UART Nokia H4+ protocol support"
120 depends on BT_HCIUART
121 depends on BT_HCIUART_SERDEV
122 depends on GPIOLIB
123 depends on PM
124 select BT_HCIUART_H4
125 select BT_BCM
126 help
127 Nokia H4+ is serial protocol for communication between Bluetooth
128 device and host. This protocol is required for Bluetooth devices
129 with UART interface in Nokia devices.
130
131 Say Y here to compile support for Nokia's H4+ protocol.
132
133config BT_HCIUART_BCSP
134 bool "BCSP protocol support"
135 depends on BT_HCIUART
136 select BITREVERSE
137 help
138 BCSP (BlueCore Serial Protocol) is serial protocol for communication
139 between Bluetooth device and host. This protocol is required for non
140 USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
141 CF cards.
142
143 Say Y here to compile support for HCI BCSP protocol.
144
145config BT_HCIUART_ATH3K
146 bool "Atheros AR300x serial support"
147 depends on BT_HCIUART
148 select BT_HCIUART_H4
149 help
150 HCIATH3K (HCI Atheros AR300x) is a serial protocol for
151 communication between host and Atheros AR300x Bluetooth devices.
152 This protocol enables AR300x chips to be enabled with
153 power management support.
154 Enable this if you have Atheros AR300x serial Bluetooth device.
155
156 Say Y here to compile support for HCI UART ATH3K protocol.
157
158config BT_HCIUART_LL
159 bool "HCILL protocol support"
160 depends on BT_HCIUART_SERDEV
161 select BT_HCIUART_H4
162 help
163 HCILL (HCI Low Level) is a serial protocol for communication
164 between Bluetooth device and host. This protocol is required for
165 serial Bluetooth devices that are based on Texas Instruments'
166 BRF chips.
167
168 Say Y here to compile support for HCILL protocol.
169
170config BT_HCIUART_3WIRE
171 bool "Three-wire UART (H5) protocol support"
172 depends on BT_HCIUART
173 depends on BT_HCIUART_SERDEV
174 help
175 The HCI Three-wire UART Transport Layer makes it possible to
176 user the Bluetooth HCI over a serial port interface. The HCI
177 Three-wire UART Transport Layer assumes that the UART
178 communication may have bit errors, overrun errors or burst
179 errors and thereby making CTS/RTS lines unnecessary.
180
181 Say Y here to compile support for Three-wire UART protocol.
182
183config BT_HCIUART_INTEL
184 bool "Intel protocol support"
185 depends on BT_HCIUART
186 depends on GPIOLIB
187 select BT_HCIUART_H4
188 select BT_INTEL
189 help
190 The Intel protocol support enables Bluetooth HCI over serial
191 port interface for Intel Bluetooth controllers.
192
193 Say Y here to compile support for Intel protocol.
194
195config BT_HCIUART_BCM
196 bool "Broadcom protocol support"
197 depends on BT_HCIUART
198 depends on BT_HCIUART_SERDEV
199 depends on (!ACPI || SERIAL_DEV_CTRL_TTYPORT)
200 depends on GPIOLIB
201 select BT_HCIUART_H4
202 select BT_BCM
203 help
204 The Broadcom protocol support enables Bluetooth HCI over serial
205 port interface for Broadcom Bluetooth controllers.
206
207 Say Y here to compile support for Broadcom protocol.
208
209config BT_HCIUART_RTL
210 bool "Realtek protocol support"
211 depends on BT_HCIUART
212 depends on BT_HCIUART_SERDEV
213 depends on GPIOLIB
214 depends on (ACPI || SERIAL_DEV_CTRL_TTYPORT)
215 select BT_HCIUART_3WIRE
216 select BT_RTL
217 help
218 The Realtek protocol support enables Bluetooth HCI over 3-Wire
219 serial port interface for Realtek Bluetooth controllers.
220
221 Say Y here to compile support for Realtek protocol.
222
223config BT_HCIUART_QCA
224 bool "Qualcomm Atheros protocol support"
225 depends on BT_HCIUART
226 depends on BT_HCIUART_SERDEV
227 select BT_HCIUART_H4
228 select BT_QCA
229 help
230 The Qualcomm Atheros protocol supports HCI In-Band Sleep feature
231 over serial port interface(H4) between controller and host.
232 This protocol is required for UART clock control for QCA Bluetooth
233 devices.
234
235 Say Y here to compile support for QCA protocol.
236
237config BT_HCIUART_AG6XX
238 bool "Intel AG6XX protocol support"
239 depends on BT_HCIUART
240 select BT_HCIUART_H4
241 select BT_INTEL
242 help
243 The Intel/AG6XX protocol support enables Bluetooth HCI over serial
244 port interface for Intel ibt 2.1 Bluetooth controllers.
245
246 Say Y here to compile support for Intel AG6XX protocol.
247
248config BT_HCIUART_MRVL
249 bool "Marvell protocol support"
250 depends on BT_HCIUART
251 depends on BT_HCIUART_SERDEV
252 select BT_HCIUART_H4
253 help
254 Marvell is serial protocol for communication between Bluetooth
255 device and host. This protocol is required for most Marvell Bluetooth
256 devices with UART interface.
257
258 Say Y here to compile support for HCI MRVL protocol.
259
260config BT_HCIBCM203X
261 tristate "HCI BCM203x USB driver"
262 depends on USB
263 select FW_LOADER
264 help
265 Bluetooth HCI BCM203x USB driver.
266 This driver provides the firmware loading mechanism for the Broadcom
267 Blutonium based devices.
268
269 Say Y here to compile support for HCI BCM203x devices into the
270 kernel or say M to compile it as module (bcm203x).
271
272config BT_HCIBPA10X
273 tristate "HCI BPA10x USB driver"
274 depends on USB
275 help
276 Bluetooth HCI BPA10x USB driver.
277 This driver provides support for the Digianswer BPA 100/105 Bluetooth
278 sniffer devices.
279
280 Say Y here to compile support for HCI BPA10x devices into the
281 kernel or say M to compile it as module (bpa10x).
282
283config BT_HCIBFUSB
284 tristate "HCI BlueFRITZ! USB driver"
285 depends on USB
286 select FW_LOADER
287 help
288 Bluetooth HCI BlueFRITZ! USB driver.
289 This driver provides support for Bluetooth USB devices with AVM
290 interface:
291 AVM BlueFRITZ! USB
292
293 Say Y here to compile support for HCI BFUSB devices into the
294 kernel or say M to compile it as module (bfusb).
295
296config BT_HCIDTL1
297 tristate "HCI DTL1 (PC Card) driver"
298 depends on PCMCIA
299 help
300 Bluetooth HCI DTL1 (PC Card) driver.
301 This driver provides support for Bluetooth PCMCIA devices with
302 Nokia DTL1 interface:
303 Nokia Bluetooth Card
304 Socket Bluetooth CF Card
305
306 Say Y here to compile support for HCI DTL1 devices into the
307 kernel or say M to compile it as module (dtl1_cs).
308
309config BT_HCIBT3C
310 tristate "HCI BT3C (PC Card) driver"
311 depends on PCMCIA
312 select FW_LOADER
313 help
314 Bluetooth HCI BT3C (PC Card) driver.
315 This driver provides support for Bluetooth PCMCIA devices with
316 3Com BT3C interface:
317 3Com Bluetooth Card (3CRWB6096)
318 HP Bluetooth Card
319
320 Say Y here to compile support for HCI BT3C devices into the
321 kernel or say M to compile it as module (bt3c_cs).
322
323config BT_HCIBLUECARD
324 tristate "HCI BlueCard (PC Card) driver"
325 depends on PCMCIA
326 help
327 Bluetooth HCI BlueCard (PC Card) driver.
328 This driver provides support for Bluetooth PCMCIA devices with
329 Anycom BlueCard interface:
330 Anycom Bluetooth PC Card
331 Anycom Bluetooth CF Card
332
333 Say Y here to compile support for HCI BlueCard devices into the
334 kernel or say M to compile it as module (bluecard_cs).
335
336config BT_HCIVHCI
337 tristate "HCI VHCI (Virtual HCI device) driver"
338 help
339 Bluetooth Virtual HCI device driver.
340 This driver is required if you want to use HCI Emulation software.
341
342 Say Y here to compile support for virtual HCI devices into the
343 kernel or say M to compile it as module (hci_vhci).
344
345config BT_MRVL
346 tristate "Marvell Bluetooth driver support"
347 help
348 The core driver to support Marvell Bluetooth devices.
349
350 This driver is required if you want to support
351 Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897/8977/8987/8997.
352
353 Say Y here to compile Marvell Bluetooth driver
354 into the kernel or say M to compile it as module.
355
356config BT_MRVL_SDIO
357 tristate "Marvell BT-over-SDIO driver"
358 depends on BT_MRVL && MMC
359 select FW_LOADER
360 select WANT_DEV_COREDUMP
361 help
362 The driver for Marvell Bluetooth chipsets with SDIO interface.
363
364 This driver is required if you want to use Marvell Bluetooth
365 devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897/SD8977/SD8987/SD8997
366 chipsets are supported.
367
368 Say Y here to compile support for Marvell BT-over-SDIO driver
369 into the kernel or say M to compile it as module.
370
371config BT_ATH3K
372 tristate "Atheros firmware download driver"
373 depends on BT_HCIBTUSB
374 select FW_LOADER
375 help
376 Bluetooth firmware download driver.
377 This driver loads the firmware into the Atheros Bluetooth
378 chipset.
379
380 Say Y here to compile support for "Atheros firmware download driver"
381 into the kernel or say M to compile it as module (ath3k).
382
383config BT_MTKSDIO
384 tristate "MediaTek HCI SDIO driver"
385 depends on MMC
386 help
387 MediaTek Bluetooth HCI SDIO driver.
388 This driver is required if you want to use MediaTek Bluetooth
389 with SDIO interface.
390
391 Say Y here to compile support for MediaTek Bluetooth SDIO devices
392 into the kernel or say M to compile it as module (btmtksdio).
393
394config BT_MTKUART
395 tristate "MediaTek HCI UART driver"
396 depends on SERIAL_DEV_BUS
397 help
398 MediaTek Bluetooth HCI UART driver.
399 This driver is required if you want to use MediaTek Bluetooth
400 with serial interface.
401
402 Say Y here to compile support for MediaTek Bluetooth UART devices
403 into the kernel or say M to compile it as module (btmtkuart).
404
405config BT_QCOMSMD
406 tristate "Qualcomm SMD based HCI support"
407 depends on RPMSG || (COMPILE_TEST && RPMSG=n)
408 depends on QCOM_WCNSS_CTRL || (COMPILE_TEST && QCOM_WCNSS_CTRL=n)
409 select BT_QCA
410 help
411 Qualcomm SMD based HCI driver.
412 This driver is used to bridge HCI data onto the shared memory
413 channels to the WCNSS core.
414
415 Say Y here to compile support for HCI over Qualcomm SMD into the
416 kernel or say M to compile as a module.
417
418config BT_HCIRSI
419 tristate
420 help
421 Redpine BT driver.
422 This driver handles BT traffic from upper layers and pass
423 to the RSI_91x coex module for further scheduling to device
424
425 Say Y here to compile support for HCI over Redpine into the
426 kernel or say M to compile as a module.
427
428endmenu
1# SPDX-License-Identifier: GPL-2.0
2
3menu "Bluetooth device drivers"
4 depends on BT
5
6config BT_INTEL
7 tristate
8 select REGMAP
9
10config BT_BCM
11 tristate
12 select FW_LOADER
13
14config BT_RTL
15 tristate
16 select FW_LOADER
17
18config BT_QCA
19 tristate
20 select FW_LOADER
21
22config BT_HCIBTUSB
23 tristate "HCI USB driver"
24 depends on USB
25 select BT_INTEL
26 help
27 Bluetooth HCI USB driver.
28 This driver is required if you want to use Bluetooth devices with
29 USB interface.
30
31 Say Y here to compile support for Bluetooth USB devices into the
32 kernel or say M to compile it as module (btusb).
33
34config BT_HCIBTUSB_AUTOSUSPEND
35 bool "Enable USB autosuspend for Bluetooth USB devices by default"
36 depends on BT_HCIBTUSB
37 help
38 Say Y here to enable USB autosuspend for Bluetooth USB devices by
39 default.
40
41 This can be overridden by passing btusb.enable_autosuspend=[y|n]
42 on the kernel commandline.
43
44config BT_HCIBTUSB_BCM
45 bool "Broadcom protocol support"
46 depends on BT_HCIBTUSB
47 select BT_BCM
48 default y
49 help
50 The Broadcom protocol support enables firmware and patchram
51 download support for Broadcom Bluetooth controllers.
52
53 Say Y here to compile support for Broadcom protocol.
54
55config BT_HCIBTUSB_RTL
56 bool "Realtek protocol support"
57 depends on BT_HCIBTUSB
58 select BT_RTL
59 default y
60 help
61 The Realtek protocol support enables firmware and configuration
62 download support for Realtek Bluetooth controllers.
63
64 Say Y here to compile support for Realtek protocol.
65
66config BT_HCIBTSDIO
67 tristate "HCI SDIO driver"
68 depends on MMC
69 help
70 Bluetooth HCI SDIO driver.
71 This driver is required if you want to use Bluetooth device with
72 SDIO interface.
73
74 Say Y here to compile support for Bluetooth SDIO devices into the
75 kernel or say M to compile it as module (btsdio).
76
77config BT_HCIUART
78 tristate "HCI UART driver"
79 depends on SERIAL_DEV_BUS || !SERIAL_DEV_BUS
80 depends on NVMEM || !NVMEM
81 depends on TTY
82 help
83 Bluetooth HCI UART driver.
84 This driver is required if you want to use Bluetooth devices with
85 serial port interface. You will also need this driver if you have
86 UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card
87 adapter and BrainBoxes Bluetooth PC Card.
88
89 Say Y here to compile support for Bluetooth UART devices into the
90 kernel or say M to compile it as module (hci_uart).
91
92config BT_HCIUART_SERDEV
93 bool
94 depends on SERIAL_DEV_BUS && BT_HCIUART
95 default y
96
97config BT_HCIUART_H4
98 bool "UART (H4) protocol support"
99 depends on BT_HCIUART
100 help
101 UART (H4) is serial protocol for communication between Bluetooth
102 device and host. This protocol is required for most Bluetooth devices
103 with UART interface, including PCMCIA and CF cards.
104
105 Say Y here to compile support for HCI UART (H4) protocol.
106
107config BT_HCIUART_NOKIA
108 tristate "UART Nokia H4+ protocol support"
109 depends on BT_HCIUART
110 depends on BT_HCIUART_SERDEV
111 depends on GPIOLIB
112 depends on PM
113 select BT_HCIUART_H4
114 select BT_BCM
115 help
116 Nokia H4+ is serial protocol for communication between Bluetooth
117 device and host. This protocol is required for Bluetooth devices
118 with UART interface in Nokia devices.
119
120 Say Y here to compile support for Nokia's H4+ protocol.
121
122config BT_HCIUART_BCSP
123 bool "BCSP protocol support"
124 depends on BT_HCIUART
125 select BITREVERSE
126 help
127 BCSP (BlueCore Serial Protocol) is serial protocol for communication
128 between Bluetooth device and host. This protocol is required for non
129 USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
130 CF cards.
131
132 Say Y here to compile support for HCI BCSP protocol.
133
134config BT_HCIUART_ATH3K
135 bool "Atheros AR300x serial support"
136 depends on BT_HCIUART
137 select BT_HCIUART_H4
138 help
139 HCIATH3K (HCI Atheros AR300x) is a serial protocol for
140 communication between host and Atheros AR300x Bluetooth devices.
141 This protocol enables AR300x chips to be enabled with
142 power management support.
143 Enable this if you have Atheros AR300x serial Bluetooth device.
144
145 Say Y here to compile support for HCI UART ATH3K protocol.
146
147config BT_HCIUART_LL
148 bool "HCILL protocol support"
149 depends on BT_HCIUART_SERDEV
150 select BT_HCIUART_H4
151 help
152 HCILL (HCI Low Level) is a serial protocol for communication
153 between Bluetooth device and host. This protocol is required for
154 serial Bluetooth devices that are based on Texas Instruments'
155 BRF chips.
156
157 Say Y here to compile support for HCILL protocol.
158
159config BT_HCIUART_3WIRE
160 bool "Three-wire UART (H5) protocol support"
161 depends on BT_HCIUART
162 help
163 The HCI Three-wire UART Transport Layer makes it possible to
164 user the Bluetooth HCI over a serial port interface. The HCI
165 Three-wire UART Transport Layer assumes that the UART
166 communication may have bit errors, overrun errors or burst
167 errors and thereby making CTS/RTS lines unnecessary.
168
169 Say Y here to compile support for Three-wire UART protocol.
170
171config BT_HCIUART_INTEL
172 bool "Intel protocol support"
173 depends on BT_HCIUART
174 depends on GPIOLIB
175 select BT_HCIUART_H4
176 select BT_INTEL
177 help
178 The Intel protocol support enables Bluetooth HCI over serial
179 port interface for Intel Bluetooth controllers.
180
181 Say Y here to compile support for Intel protocol.
182
183config BT_HCIUART_BCM
184 bool "Broadcom protocol support"
185 depends on BT_HCIUART
186 depends on BT_HCIUART_SERDEV
187 depends on (!ACPI || SERIAL_DEV_CTRL_TTYPORT)
188 depends on GPIOLIB
189 select BT_HCIUART_H4
190 select BT_BCM
191 help
192 The Broadcom protocol support enables Bluetooth HCI over serial
193 port interface for Broadcom Bluetooth controllers.
194
195 Say Y here to compile support for Broadcom protocol.
196
197config BT_HCIUART_QCA
198 bool "Qualcomm Atheros protocol support"
199 depends on BT_HCIUART
200 select BT_HCIUART_H4
201 select BT_QCA
202 help
203 The Qualcomm Atheros protocol supports HCI In-Band Sleep feature
204 over serial port interface(H4) between controller and host.
205 This protocol is required for UART clock control for QCA Bluetooth
206 devices.
207
208 Say Y here to compile support for QCA protocol.
209
210config BT_HCIUART_AG6XX
211 bool "Intel AG6XX protocol support"
212 depends on BT_HCIUART
213 select BT_HCIUART_H4
214 select BT_INTEL
215 help
216 The Intel/AG6XX protocol support enables Bluetooth HCI over serial
217 port interface for Intel ibt 2.1 Bluetooth controllers.
218
219 Say Y here to compile support for Intel AG6XX protocol.
220
221config BT_HCIUART_MRVL
222 bool "Marvell protocol support"
223 depends on BT_HCIUART
224 select BT_HCIUART_H4
225 help
226 Marvell is serial protocol for communication between Bluetooth
227 device and host. This protocol is required for most Marvell Bluetooth
228 devices with UART interface.
229
230 Say Y here to compile support for HCI MRVL protocol.
231
232config BT_HCIBCM203X
233 tristate "HCI BCM203x USB driver"
234 depends on USB
235 select FW_LOADER
236 help
237 Bluetooth HCI BCM203x USB driver.
238 This driver provides the firmware loading mechanism for the Broadcom
239 Blutonium based devices.
240
241 Say Y here to compile support for HCI BCM203x devices into the
242 kernel or say M to compile it as module (bcm203x).
243
244config BT_HCIBPA10X
245 tristate "HCI BPA10x USB driver"
246 depends on USB
247 help
248 Bluetooth HCI BPA10x USB driver.
249 This driver provides support for the Digianswer BPA 100/105 Bluetooth
250 sniffer devices.
251
252 Say Y here to compile support for HCI BPA10x devices into the
253 kernel or say M to compile it as module (bpa10x).
254
255config BT_HCIBFUSB
256 tristate "HCI BlueFRITZ! USB driver"
257 depends on USB
258 select FW_LOADER
259 help
260 Bluetooth HCI BlueFRITZ! USB driver.
261 This driver provides support for Bluetooth USB devices with AVM
262 interface:
263 AVM BlueFRITZ! USB
264
265 Say Y here to compile support for HCI BFUSB devices into the
266 kernel or say M to compile it as module (bfusb).
267
268config BT_HCIDTL1
269 tristate "HCI DTL1 (PC Card) driver"
270 depends on PCMCIA
271 help
272 Bluetooth HCI DTL1 (PC Card) driver.
273 This driver provides support for Bluetooth PCMCIA devices with
274 Nokia DTL1 interface:
275 Nokia Bluetooth Card
276 Socket Bluetooth CF Card
277
278 Say Y here to compile support for HCI DTL1 devices into the
279 kernel or say M to compile it as module (dtl1_cs).
280
281config BT_HCIBT3C
282 tristate "HCI BT3C (PC Card) driver"
283 depends on PCMCIA
284 select FW_LOADER
285 help
286 Bluetooth HCI BT3C (PC Card) driver.
287 This driver provides support for Bluetooth PCMCIA devices with
288 3Com BT3C interface:
289 3Com Bluetooth Card (3CRWB6096)
290 HP Bluetooth Card
291
292 Say Y here to compile support for HCI BT3C devices into the
293 kernel or say M to compile it as module (bt3c_cs).
294
295config BT_HCIBLUECARD
296 tristate "HCI BlueCard (PC Card) driver"
297 depends on PCMCIA
298 help
299 Bluetooth HCI BlueCard (PC Card) driver.
300 This driver provides support for Bluetooth PCMCIA devices with
301 Anycom BlueCard interface:
302 Anycom Bluetooth PC Card
303 Anycom Bluetooth CF Card
304
305 Say Y here to compile support for HCI BlueCard devices into the
306 kernel or say M to compile it as module (bluecard_cs).
307
308config BT_HCIVHCI
309 tristate "HCI VHCI (Virtual HCI device) driver"
310 help
311 Bluetooth Virtual HCI device driver.
312 This driver is required if you want to use HCI Emulation software.
313
314 Say Y here to compile support for virtual HCI devices into the
315 kernel or say M to compile it as module (hci_vhci).
316
317config BT_MRVL
318 tristate "Marvell Bluetooth driver support"
319 help
320 The core driver to support Marvell Bluetooth devices.
321
322 This driver is required if you want to support
323 Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897/8997.
324
325 Say Y here to compile Marvell Bluetooth driver
326 into the kernel or say M to compile it as module.
327
328config BT_MRVL_SDIO
329 tristate "Marvell BT-over-SDIO driver"
330 depends on BT_MRVL && MMC
331 select FW_LOADER
332 select WANT_DEV_COREDUMP
333 help
334 The driver for Marvell Bluetooth chipsets with SDIO interface.
335
336 This driver is required if you want to use Marvell Bluetooth
337 devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897/SD8997
338 chipsets are supported.
339
340 Say Y here to compile support for Marvell BT-over-SDIO driver
341 into the kernel or say M to compile it as module.
342
343config BT_ATH3K
344 tristate "Atheros firmware download driver"
345 depends on BT_HCIBTUSB
346 select FW_LOADER
347 help
348 Bluetooth firmware download driver.
349 This driver loads the firmware into the Atheros Bluetooth
350 chipset.
351
352 Say Y here to compile support for "Atheros firmware download driver"
353 into the kernel or say M to compile it as module (ath3k).
354
355config BT_WILINK
356 tristate "Texas Instruments WiLink7 driver"
357 depends on TI_ST
358 help
359 This enables the Bluetooth driver for Texas Instrument's BT/FM/GPS
360 combo devices. This makes use of shared transport line discipline
361 core driver to communicate with the BT core of the combo chip.
362
363 Say Y here to compile support for Texas Instrument's WiLink7 driver
364 into the kernel or say M to compile it as module (btwilink).
365
366config BT_QCOMSMD
367 tristate "Qualcomm SMD based HCI support"
368 depends on RPMSG || (COMPILE_TEST && RPMSG=n)
369 depends on QCOM_WCNSS_CTRL || (COMPILE_TEST && QCOM_WCNSS_CTRL=n)
370 select BT_QCA
371 help
372 Qualcomm SMD based HCI driver.
373 This driver is used to bridge HCI data onto the shared memory
374 channels to the WCNSS core.
375
376 Say Y here to compile support for HCI over Qualcomm SMD into the
377 kernel or say M to compile as a module.
378
379config BT_HCIRSI
380 tristate
381 help
382 Redpine BT driver.
383 This driver handles BT traffic from upper layers and pass
384 to the RSI_91x coex module for further scheduling to device
385
386 Say Y here to compile support for HCI over Redpine into the
387 kernel or say M to compile as a module.
388
389endmenu