1/*
   2 * Copyright © 2006 Intel Corporation
   3 *
   4 * Permission is hereby granted, free of charge, to any person obtaining a
   5 * copy of this software and associated documentation files (the "Software"),
   6 * to deal in the Software without restriction, including without limitation
   7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
   8 * and/or sell copies of the Software, and to permit persons to whom the
   9 * Software is furnished to do so, subject to the following conditions:
  10 *
  11 * The above copyright notice and this permission notice (including the next
  12 * paragraph) shall be included in all copies or substantial portions of the
  13 * Software.
  14 *
  15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
  18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  20 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  21 * SOFTWARE.
  22 *
  23 * Authors:
  24 *    Eric Anholt <eric@anholt.net>
  25 *
  26 */
  27
  28#include <drm/drm_dp_helper.h>
  29#include <drm/i915_drm.h>
  30
  31#include "display/intel_display.h"
  32#include "display/intel_gmbus.h"
  33
  34#include "i915_drv.h"
 
 
 
 
  35
  36#define _INTEL_BIOS_PRIVATE
  37#include "intel_vbt_defs.h"
  38
  39/**
  40 * DOC: Video BIOS Table (VBT)
  41 *
  42 * The Video BIOS Table, or VBT, provides platform and board specific
  43 * configuration information to the driver that is not discoverable or available
  44 * through other means. The configuration is mostly related to display
  45 * hardware. The VBT is available via the ACPI OpRegion or, on older systems, in
  46 * the PCI ROM.
  47 *
  48 * The VBT consists of a VBT Header (defined as &struct vbt_header), a BDB
  49 * Header (&struct bdb_header), and a number of BIOS Data Blocks (BDB) that
  50 * contain the actual configuration information. The VBT Header, and thus the
  51 * VBT, begins with "$VBT" signature. The VBT Header contains the offset of the
  52 * BDB Header. The data blocks are concatenated after the BDB Header. The data
  53 * blocks have a 1-byte Block ID, 2-byte Block Size, and Block Size bytes of
  54 * data. (Block 53, the MIPI Sequence Block is an exception.)
  55 *
  56 * The driver parses the VBT during load. The relevant information is stored in
  57 * driver private data for ease of use, and the actual VBT is not read after
  58 * that.
  59 */
  60
 
 
 
 
 
 
 
 
 
  61#define	SLAVE_ADDR1	0x70
  62#define	SLAVE_ADDR2	0x72
  63
  64/* Get BDB block size given a pointer to Block ID. */
  65static u32 _get_blocksize(const u8 *block_base)
  66{
  67	/* The MIPI Sequence Block v3+ has a separate size field. */
  68	if (*block_base == BDB_MIPI_SEQUENCE && *(block_base + 3) >= 3)
  69		return *((const u32 *)(block_base + 4));
  70	else
  71		return *((const u16 *)(block_base + 1));
  72}
  73
  74/* Get BDB block size give a pointer to data after Block ID and Block Size. */
  75static u32 get_blocksize(const void *block_data)
  76{
  77	return _get_blocksize(block_data - 3);
  78}
  79
  80static const void *
  81find_section(const void *_bdb, enum bdb_block_id section_id)
  82{
  83	const struct bdb_header *bdb = _bdb;
  84	const u8 *base = _bdb;
  85	int index = 0;
  86	u32 total, current_size;
  87	enum bdb_block_id current_id;
  88
  89	/* skip to first section */
  90	index += bdb->header_size;
  91	total = bdb->bdb_size;
  92
  93	/* walk the sections looking for section_id */
  94	while (index + 3 < total) {
  95		current_id = *(base + index);
  96		current_size = _get_blocksize(base + index);
  97		index += 3;
  98
  99		if (index + current_size > total)
 100			return NULL;
 101
 102		if (current_id == section_id)
 103			return base + index;
 104
 105		index += current_size;
 106	}
 107
 108	return NULL;
 109}
 110
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 111static void
 112fill_detail_timing_data(struct drm_display_mode *panel_fixed_mode,
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 113			const struct lvds_dvo_timing *dvo_timing)
 114{
 115	panel_fixed_mode->hdisplay = (dvo_timing->hactive_hi << 8) |
 116		dvo_timing->hactive_lo;
 117	panel_fixed_mode->hsync_start = panel_fixed_mode->hdisplay +
 118		((dvo_timing->hsync_off_hi << 8) | dvo_timing->hsync_off_lo);
 119	panel_fixed_mode->hsync_end = panel_fixed_mode->hsync_start +
 120		((dvo_timing->hsync_pulse_width_hi << 8) |
 121			dvo_timing->hsync_pulse_width_lo);
 122	panel_fixed_mode->htotal = panel_fixed_mode->hdisplay +
 123		((dvo_timing->hblank_hi << 8) | dvo_timing->hblank_lo);
 124
 125	panel_fixed_mode->vdisplay = (dvo_timing->vactive_hi << 8) |
 126		dvo_timing->vactive_lo;
 127	panel_fixed_mode->vsync_start = panel_fixed_mode->vdisplay +
 128		((dvo_timing->vsync_off_hi << 4) | dvo_timing->vsync_off_lo);
 129	panel_fixed_mode->vsync_end = panel_fixed_mode->vsync_start +
 130		((dvo_timing->vsync_pulse_width_hi << 4) |
 131			dvo_timing->vsync_pulse_width_lo);
 132	panel_fixed_mode->vtotal = panel_fixed_mode->vdisplay +
 133		((dvo_timing->vblank_hi << 8) | dvo_timing->vblank_lo);
 134	panel_fixed_mode->clock = dvo_timing->clock * 10;
 135	panel_fixed_mode->type = DRM_MODE_TYPE_PREFERRED;
 136
 137	if (dvo_timing->hsync_positive)
 138		panel_fixed_mode->flags |= DRM_MODE_FLAG_PHSYNC;
 139	else
 140		panel_fixed_mode->flags |= DRM_MODE_FLAG_NHSYNC;
 141
 142	if (dvo_timing->vsync_positive)
 143		panel_fixed_mode->flags |= DRM_MODE_FLAG_PVSYNC;
 144	else
 145		panel_fixed_mode->flags |= DRM_MODE_FLAG_NVSYNC;
 146
 147	panel_fixed_mode->width_mm = (dvo_timing->himage_hi << 8) |
 148		dvo_timing->himage_lo;
 149	panel_fixed_mode->height_mm = (dvo_timing->vimage_hi << 8) |
 150		dvo_timing->vimage_lo;
 151
 152	/* Some VBTs have bogus h/vtotal values */
 153	if (panel_fixed_mode->hsync_end > panel_fixed_mode->htotal)
 154		panel_fixed_mode->htotal = panel_fixed_mode->hsync_end + 1;
 155	if (panel_fixed_mode->vsync_end > panel_fixed_mode->vtotal)
 156		panel_fixed_mode->vtotal = panel_fixed_mode->vsync_end + 1;
 
 
 
 
 
 
 157
 158	drm_mode_set_name(panel_fixed_mode);
 159}
 160
 161static const struct lvds_dvo_timing *
 162get_lvds_dvo_timing(const struct bdb_lvds_lfp_data *lvds_lfp_data,
 163		    const struct bdb_lvds_lfp_data_ptrs *lvds_lfp_data_ptrs,
 164		    int index)
 165{
 166	/*
 167	 * the size of fp_timing varies on the different platform.
 168	 * So calculate the DVO timing relative offset in LVDS data
 169	 * entry to get the DVO timing entry
 170	 */
 171
 172	int lfp_data_size =
 173		lvds_lfp_data_ptrs->ptr[1].dvo_timing_offset -
 174		lvds_lfp_data_ptrs->ptr[0].dvo_timing_offset;
 175	int dvo_timing_offset =
 176		lvds_lfp_data_ptrs->ptr[0].dvo_timing_offset -
 177		lvds_lfp_data_ptrs->ptr[0].fp_timing_offset;
 178	char *entry = (char *)lvds_lfp_data->data + lfp_data_size * index;
 179
 180	return (struct lvds_dvo_timing *)(entry + dvo_timing_offset);
 181}
 182
 183/* get lvds_fp_timing entry
 184 * this function may return NULL if the corresponding entry is invalid
 185 */
 186static const struct lvds_fp_timing *
 187get_lvds_fp_timing(const struct bdb_header *bdb,
 188		   const struct bdb_lvds_lfp_data *data,
 189		   const struct bdb_lvds_lfp_data_ptrs *ptrs,
 190		   int index)
 191{
 192	size_t data_ofs = (const u8 *)data - (const u8 *)bdb;
 193	u16 data_size = ((const u16 *)data)[-1]; /* stored in header */
 194	size_t ofs;
 195
 196	if (index >= ARRAY_SIZE(ptrs->ptr))
 197		return NULL;
 198	ofs = ptrs->ptr[index].fp_timing_offset;
 199	if (ofs < data_ofs ||
 200	    ofs + sizeof(struct lvds_fp_timing) > data_ofs + data_size)
 
 
 
 
 
 
 
 
 
 
 201		return NULL;
 202	return (const struct lvds_fp_timing *)((const u8 *)bdb + ofs);
 203}
 204
 205/* Try to find integrated panel data */
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 206static void
 207parse_lfp_panel_data(struct drm_i915_private *dev_priv,
 208		     const struct bdb_header *bdb)
 209{
 210	const struct bdb_lvds_options *lvds_options;
 211	const struct bdb_lvds_lfp_data *lvds_lfp_data;
 212	const struct bdb_lvds_lfp_data_ptrs *lvds_lfp_data_ptrs;
 213	const struct lvds_dvo_timing *panel_dvo_timing;
 214	const struct lvds_fp_timing *fp_timing;
 215	struct drm_display_mode *panel_fixed_mode;
 216	int panel_type;
 217	int drrs_mode;
 218	int ret;
 219
 220	lvds_options = find_section(bdb, BDB_LVDS_OPTIONS);
 221	if (!lvds_options)
 222		return;
 223
 224	dev_priv->vbt.lvds_dither = lvds_options->pixel_dither;
 225
 226	ret = intel_opregion_get_panel_type(dev_priv);
 227	if (ret >= 0) {
 228		WARN_ON(ret > 0xf);
 229		panel_type = ret;
 230		DRM_DEBUG_KMS("Panel type: %d (OpRegion)\n", panel_type);
 231	} else {
 232		if (lvds_options->panel_type > 0xf) {
 233			DRM_DEBUG_KMS("Invalid VBT panel type 0x%x\n",
 234				      lvds_options->panel_type);
 235			return;
 236		}
 237		panel_type = lvds_options->panel_type;
 238		DRM_DEBUG_KMS("Panel type: %d (VBT)\n", panel_type);
 239	}
 240
 241	dev_priv->vbt.panel_type = panel_type;
 242
 243	drrs_mode = (lvds_options->dps_panel_type_bits
 244				>> (panel_type * 2)) & MODE_MASK;
 245	/*
 246	 * VBT has static DRRS = 0 and seamless DRRS = 2.
 247	 * The below piece of code is required to adjust vbt.drrs_type
 248	 * to match the enum drrs_support_type.
 249	 */
 250	switch (drrs_mode) {
 251	case 0:
 252		dev_priv->vbt.drrs_type = STATIC_DRRS_SUPPORT;
 253		DRM_DEBUG_KMS("DRRS supported mode is static\n");
 254		break;
 255	case 2:
 256		dev_priv->vbt.drrs_type = SEAMLESS_DRRS_SUPPORT;
 257		DRM_DEBUG_KMS("DRRS supported mode is seamless\n");
 
 258		break;
 259	default:
 260		dev_priv->vbt.drrs_type = DRRS_NOT_SUPPORTED;
 261		DRM_DEBUG_KMS("DRRS not supported (VBT input)\n");
 
 262		break;
 263	}
 
 264
 265	lvds_lfp_data = find_section(bdb, BDB_LVDS_LFP_DATA);
 266	if (!lvds_lfp_data)
 267		return;
 268
 269	lvds_lfp_data_ptrs = find_section(bdb, BDB_LVDS_LFP_DATA_PTRS);
 270	if (!lvds_lfp_data_ptrs)
 271		return;
 
 
 
 272
 273	panel_dvo_timing = get_lvds_dvo_timing(lvds_lfp_data,
 274					       lvds_lfp_data_ptrs,
 275					       panel_type);
 276
 277	panel_fixed_mode = kzalloc(sizeof(*panel_fixed_mode), GFP_KERNEL);
 278	if (!panel_fixed_mode)
 279		return;
 280
 281	fill_detail_timing_data(panel_fixed_mode, panel_dvo_timing);
 282
 283	dev_priv->vbt.lfp_lvds_vbt_mode = panel_fixed_mode;
 284
 285	DRM_DEBUG_KMS("Found panel mode in BIOS VBT tables:\n");
 286	drm_mode_debug_printmodeline(panel_fixed_mode);
 
 287
 288	fp_timing = get_lvds_fp_timing(bdb, lvds_lfp_data,
 289				       lvds_lfp_data_ptrs,
 290				       panel_type);
 291	if (fp_timing) {
 292		/* check the resolution, just to be sure */
 293		if (fp_timing->x_res == panel_fixed_mode->hdisplay &&
 294		    fp_timing->y_res == panel_fixed_mode->vdisplay) {
 295			dev_priv->vbt.bios_lvds_val = fp_timing->lvds_reg_val;
 296			DRM_DEBUG_KMS("VBT initial LVDS value %x\n",
 297				      dev_priv->vbt.bios_lvds_val);
 298		}
 299	}
 300}
 301
 302static void
 303parse_lfp_backlight(struct drm_i915_private *dev_priv,
 304		    const struct bdb_header *bdb)
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 305{
 306	const struct bdb_lfp_backlight_data *backlight_data;
 307	const struct lfp_backlight_data_entry *entry;
 308	int panel_type = dev_priv->vbt.panel_type;
 
 309
 310	backlight_data = find_section(bdb, BDB_LVDS_BACKLIGHT);
 311	if (!backlight_data)
 312		return;
 313
 314	if (backlight_data->entry_size != sizeof(backlight_data->data[0])) {
 315		DRM_DEBUG_KMS("Unsupported backlight data entry size %u\n",
 316			      backlight_data->entry_size);
 
 317		return;
 318	}
 319
 320	entry = &backlight_data->data[panel_type];
 321
 322	dev_priv->vbt.backlight.present = entry->type == BDB_BACKLIGHT_TYPE_PWM;
 323	if (!dev_priv->vbt.backlight.present) {
 324		DRM_DEBUG_KMS("PWM backlight not present in VBT (type %u)\n",
 325			      entry->type);
 
 326		return;
 327	}
 328
 329	dev_priv->vbt.backlight.type = INTEL_BACKLIGHT_DISPLAY_DDI;
 330	if (bdb->version >= 191 &&
 331	    get_blocksize(backlight_data) >= sizeof(*backlight_data)) {
 332		const struct lfp_backlight_control_method *method;
 333
 334		method = &backlight_data->backlight_control[panel_type];
 335		dev_priv->vbt.backlight.type = method->type;
 336		dev_priv->vbt.backlight.controller = method->controller;
 337	}
 338
 339	dev_priv->vbt.backlight.pwm_freq_hz = entry->pwm_freq_hz;
 340	dev_priv->vbt.backlight.active_low_pwm = entry->active_low_pwm;
 341	dev_priv->vbt.backlight.min_brightness = entry->min_brightness;
 342	DRM_DEBUG_KMS("VBT backlight PWM modulation frequency %u Hz, "
 343		      "active %s, min brightness %u, level %u, controller %u\n",
 344		      dev_priv->vbt.backlight.pwm_freq_hz,
 345		      dev_priv->vbt.backlight.active_low_pwm ? "low" : "high",
 346		      dev_priv->vbt.backlight.min_brightness,
 347		      backlight_data->level[panel_type],
 348		      dev_priv->vbt.backlight.controller);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 349}
 350
 351/* Try to find sdvo panel data */
 352static void
 353parse_sdvo_panel_data(struct drm_i915_private *dev_priv,
 354		      const struct bdb_header *bdb)
 355{
 356	const struct bdb_sdvo_panel_dtds *dtds;
 357	struct drm_display_mode *panel_fixed_mode;
 358	int index;
 359
 360	index = i915_modparams.vbt_sdvo_panel_type;
 361	if (index == -2) {
 362		DRM_DEBUG_KMS("Ignore SDVO panel mode from BIOS VBT tables.\n");
 
 363		return;
 364	}
 365
 366	if (index == -1) {
 367		const struct bdb_sdvo_lvds_options *sdvo_lvds_options;
 368
 369		sdvo_lvds_options = find_section(bdb, BDB_SDVO_LVDS_OPTIONS);
 370		if (!sdvo_lvds_options)
 371			return;
 372
 373		index = sdvo_lvds_options->panel_type;
 374	}
 375
 376	dtds = find_section(bdb, BDB_SDVO_PANEL_DTDS);
 377	if (!dtds)
 378		return;
 379
 380	panel_fixed_mode = kzalloc(sizeof(*panel_fixed_mode), GFP_KERNEL);
 381	if (!panel_fixed_mode)
 382		return;
 383
 384	fill_detail_timing_data(panel_fixed_mode, &dtds->dtds[index]);
 385
 386	dev_priv->vbt.sdvo_lvds_vbt_mode = panel_fixed_mode;
 387
 388	DRM_DEBUG_KMS("Found SDVO panel mode in BIOS VBT tables:\n");
 389	drm_mode_debug_printmodeline(panel_fixed_mode);
 
 390}
 391
 392static int intel_bios_ssc_frequency(struct drm_i915_private *dev_priv,
 393				    bool alternate)
 394{
 395	switch (INTEL_GEN(dev_priv)) {
 396	case 2:
 397		return alternate ? 66667 : 48000;
 398	case 3:
 399	case 4:
 400		return alternate ? 100000 : 96000;
 401	default:
 402		return alternate ? 100000 : 120000;
 403	}
 404}
 405
 406static void
 407parse_general_features(struct drm_i915_private *dev_priv,
 408		       const struct bdb_header *bdb)
 409{
 410	const struct bdb_general_features *general;
 411
 412	general = find_section(bdb, BDB_GENERAL_FEATURES);
 413	if (!general)
 414		return;
 415
 416	dev_priv->vbt.int_tv_support = general->int_tv_support;
 417	/* int_crt_support can't be trusted on earlier platforms */
 418	if (bdb->version >= 155 &&
 419	    (HAS_DDI(dev_priv) || IS_VALLEYVIEW(dev_priv)))
 420		dev_priv->vbt.int_crt_support = general->int_crt_support;
 421	dev_priv->vbt.lvds_use_ssc = general->enable_ssc;
 422	dev_priv->vbt.lvds_ssc_freq =
 423		intel_bios_ssc_frequency(dev_priv, general->ssc_freq);
 424	dev_priv->vbt.display_clock_mode = general->display_clock_mode;
 425	dev_priv->vbt.fdi_rx_polarity_inverted = general->fdi_rx_polarity_inverted;
 426	if (bdb->version >= 181) {
 427		dev_priv->vbt.orientation = general->rotate_180 ?
 428			DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP :
 429			DRM_MODE_PANEL_ORIENTATION_NORMAL;
 430	} else {
 431		dev_priv->vbt.orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
 432	}
 433	DRM_DEBUG_KMS("BDB_GENERAL_FEATURES int_tv_support %d int_crt_support %d lvds_use_ssc %d lvds_ssc_freq %d display_clock_mode %d fdi_rx_polarity_inverted %d\n",
 434		      dev_priv->vbt.int_tv_support,
 435		      dev_priv->vbt.int_crt_support,
 436		      dev_priv->vbt.lvds_use_ssc,
 437		      dev_priv->vbt.lvds_ssc_freq,
 438		      dev_priv->vbt.display_clock_mode,
 439		      dev_priv->vbt.fdi_rx_polarity_inverted);
 
 
 
 
 
 
 
 440}
 441
 442static const struct child_device_config *
 443child_device_ptr(const struct bdb_general_definitions *defs, int i)
 444{
 445	return (const void *) &defs->devices[i * defs->child_dev_size];
 446}
 447
 448static void
 449parse_sdvo_device_mapping(struct drm_i915_private *dev_priv, u8 bdb_version)
 450{
 451	struct sdvo_device_mapping *mapping;
 452	const struct child_device_config *child;
 453	int i, count = 0;
 454
 455	/*
 456	 * Only parse SDVO mappings on gens that could have SDVO. This isn't
 457	 * accurate and doesn't have to be, as long as it's not too strict.
 458	 */
 459	if (!IS_GEN_RANGE(dev_priv, 3, 7)) {
 460		DRM_DEBUG_KMS("Skipping SDVO device mapping\n");
 461		return;
 462	}
 463
 464	for (i = 0, count = 0; i < dev_priv->vbt.child_dev_num; i++) {
 465		child = dev_priv->vbt.child_dev + i;
 
 466
 467		if (child->slave_addr != SLAVE_ADDR1 &&
 468		    child->slave_addr != SLAVE_ADDR2) {
 469			/*
 470			 * If the slave address is neither 0x70 nor 0x72,
 471			 * it is not a SDVO device. Skip it.
 472			 */
 473			continue;
 474		}
 475		if (child->dvo_port != DEVICE_PORT_DVOB &&
 476		    child->dvo_port != DEVICE_PORT_DVOC) {
 477			/* skip the incorrect SDVO port */
 478			DRM_DEBUG_KMS("Incorrect SDVO port. Skip it\n");
 
 479			continue;
 480		}
 481		DRM_DEBUG_KMS("the SDVO device with slave addr %2x is found on"
 482			      " %s port\n",
 483			      child->slave_addr,
 484			      (child->dvo_port == DEVICE_PORT_DVOB) ?
 485			      "SDVOB" : "SDVOC");
 486		mapping = &dev_priv->vbt.sdvo_mappings[child->dvo_port - 1];
 
 487		if (!mapping->initialized) {
 488			mapping->dvo_port = child->dvo_port;
 489			mapping->slave_addr = child->slave_addr;
 490			mapping->dvo_wiring = child->dvo_wiring;
 491			mapping->ddc_pin = child->ddc_pin;
 492			mapping->i2c_pin = child->i2c_pin;
 493			mapping->initialized = 1;
 494			DRM_DEBUG_KMS("SDVO device: dvo=%x, addr=%x, wiring=%d, ddc_pin=%d, i2c_pin=%d\n",
 495				      mapping->dvo_port,
 496				      mapping->slave_addr,
 497				      mapping->dvo_wiring,
 498				      mapping->ddc_pin,
 499				      mapping->i2c_pin);
 500		} else {
 501			DRM_DEBUG_KMS("Maybe one SDVO port is shared by "
 502					 "two SDVO device.\n");
 
 503		}
 504		if (child->slave2_addr) {
 505			/* Maybe this is a SDVO device with multiple inputs */
 506			/* And the mapping info is not added */
 507			DRM_DEBUG_KMS("there exists the slave2_addr. Maybe this"
 508				" is a SDVO device with multiple inputs.\n");
 
 509		}
 510		count++;
 511	}
 512
 513	if (!count) {
 514		/* No SDVO device info is found */
 515		DRM_DEBUG_KMS("No SDVO device info is found in VBT\n");
 
 516	}
 517}
 518
 519static void
 520parse_driver_features(struct drm_i915_private *dev_priv,
 521		      const struct bdb_header *bdb)
 522{
 523	const struct bdb_driver_features *driver;
 524
 525	driver = find_section(bdb, BDB_DRIVER_FEATURES);
 526	if (!driver)
 527		return;
 528
 529	if (INTEL_GEN(dev_priv) >= 5) {
 530		/*
 531		 * Note that we consider BDB_DRIVER_FEATURE_INT_SDVO_LVDS
 532		 * to mean "eDP". The VBT spec doesn't agree with that
 533		 * interpretation, but real world VBTs seem to.
 534		 */
 535		if (driver->lvds_config != BDB_DRIVER_FEATURE_INT_LVDS)
 536			dev_priv->vbt.int_lvds_support = 0;
 537	} else {
 538		/*
 539		 * FIXME it's not clear which BDB version has the LVDS config
 540		 * bits defined. Revision history in the VBT spec says:
 541		 * "0.92 | Add two definitions for VBT value of LVDS Active
 542		 *  Config (00b and 11b values defined) | 06/13/2005"
 543		 * but does not the specify the BDB version.
 544		 *
 545		 * So far version 134 (on i945gm) is the oldest VBT observed
 546		 * in the wild with the bits correctly populated. Version
 547		 * 108 (on i85x) does not have the bits correctly populated.
 548		 */
 549		if (bdb->version >= 134 &&
 550		    driver->lvds_config != BDB_DRIVER_FEATURE_INT_LVDS &&
 551		    driver->lvds_config != BDB_DRIVER_FEATURE_INT_SDVO_LVDS)
 552			dev_priv->vbt.int_lvds_support = 0;
 553	}
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 554
 555	DRM_DEBUG_KMS("DRRS State Enabled:%d\n", driver->drrs_enabled);
 556	/*
 557	 * If DRRS is not supported, drrs_type has to be set to 0.
 558	 * This is because, VBT is configured in such a way that
 559	 * static DRRS is 0 and DRRS not supported is represented by
 560	 * driver->drrs_enabled=false
 561	 */
 562	if (!driver->drrs_enabled)
 563		dev_priv->vbt.drrs_type = DRRS_NOT_SUPPORTED;
 564	dev_priv->vbt.psr.enable = driver->psr_enabled;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 565}
 566
 567static void
 568parse_edp(struct drm_i915_private *dev_priv, const struct bdb_header *bdb)
 
 569{
 570	const struct bdb_edp *edp;
 571	const struct edp_power_seq *edp_pps;
 572	const struct edp_fast_link_params *edp_link_params;
 573	int panel_type = dev_priv->vbt.panel_type;
 574
 575	edp = find_section(bdb, BDB_EDP);
 576	if (!edp)
 577		return;
 578
 579	switch ((edp->color_depth >> (panel_type * 2)) & 3) {
 580	case EDP_18BPP:
 581		dev_priv->vbt.edp.bpp = 18;
 582		break;
 583	case EDP_24BPP:
 584		dev_priv->vbt.edp.bpp = 24;
 585		break;
 586	case EDP_30BPP:
 587		dev_priv->vbt.edp.bpp = 30;
 588		break;
 589	}
 590
 591	/* Get the eDP sequencing and link info */
 592	edp_pps = &edp->power_seqs[panel_type];
 593	edp_link_params = &edp->fast_link_params[panel_type];
 594
 595	dev_priv->vbt.edp.pps = *edp_pps;
 596
 597	switch (edp_link_params->rate) {
 598	case EDP_RATE_1_62:
 599		dev_priv->vbt.edp.rate = DP_LINK_BW_1_62;
 600		break;
 601	case EDP_RATE_2_7:
 602		dev_priv->vbt.edp.rate = DP_LINK_BW_2_7;
 603		break;
 604	default:
 605		DRM_DEBUG_KMS("VBT has unknown eDP link rate value %u\n",
 606			      edp_link_params->rate);
 607		break;
 
 
 
 
 
 
 
 
 
 608	}
 609
 610	switch (edp_link_params->lanes) {
 611	case EDP_LANE_1:
 612		dev_priv->vbt.edp.lanes = 1;
 613		break;
 614	case EDP_LANE_2:
 615		dev_priv->vbt.edp.lanes = 2;
 616		break;
 617	case EDP_LANE_4:
 618		dev_priv->vbt.edp.lanes = 4;
 619		break;
 620	default:
 621		DRM_DEBUG_KMS("VBT has unknown eDP lane count value %u\n",
 622			      edp_link_params->lanes);
 
 623		break;
 624	}
 625
 626	switch (edp_link_params->preemphasis) {
 627	case EDP_PREEMPHASIS_NONE:
 628		dev_priv->vbt.edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_0;
 629		break;
 630	case EDP_PREEMPHASIS_3_5dB:
 631		dev_priv->vbt.edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_1;
 632		break;
 633	case EDP_PREEMPHASIS_6dB:
 634		dev_priv->vbt.edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_2;
 635		break;
 636	case EDP_PREEMPHASIS_9_5dB:
 637		dev_priv->vbt.edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_3;
 638		break;
 639	default:
 640		DRM_DEBUG_KMS("VBT has unknown eDP pre-emphasis value %u\n",
 641			      edp_link_params->preemphasis);
 
 642		break;
 643	}
 644
 645	switch (edp_link_params->vswing) {
 646	case EDP_VSWING_0_4V:
 647		dev_priv->vbt.edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_0;
 648		break;
 649	case EDP_VSWING_0_6V:
 650		dev_priv->vbt.edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_1;
 651		break;
 652	case EDP_VSWING_0_8V:
 653		dev_priv->vbt.edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_2;
 654		break;
 655	case EDP_VSWING_1_2V:
 656		dev_priv->vbt.edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_3;
 657		break;
 658	default:
 659		DRM_DEBUG_KMS("VBT has unknown eDP voltage swing value %u\n",
 660			      edp_link_params->vswing);
 
 661		break;
 662	}
 663
 664	if (bdb->version >= 173) {
 665		u8 vswing;
 666
 667		/* Don't read from VBT if module parameter has valid value*/
 668		if (i915_modparams.edp_vswing) {
 669			dev_priv->vbt.edp.low_vswing =
 670				i915_modparams.edp_vswing == 1;
 671		} else {
 672			vswing = (edp->edp_vswing_preemph >> (panel_type * 4)) & 0xF;
 673			dev_priv->vbt.edp.low_vswing = vswing == 0;
 674		}
 675	}
 
 
 
 
 
 
 
 676}
 677
 678static void
 679parse_psr(struct drm_i915_private *dev_priv, const struct bdb_header *bdb)
 
 680{
 681	const struct bdb_psr *psr;
 682	const struct psr_table *psr_table;
 683	int panel_type = dev_priv->vbt.panel_type;
 684
 685	psr = find_section(bdb, BDB_PSR);
 686	if (!psr) {
 687		DRM_DEBUG_KMS("No PSR BDB found.\n");
 688		return;
 689	}
 690
 691	psr_table = &psr->psr_table[panel_type];
 692
 693	dev_priv->vbt.psr.full_link = psr_table->full_link;
 694	dev_priv->vbt.psr.require_aux_wakeup = psr_table->require_aux_to_wakeup;
 695
 696	/* Allowed VBT values goes from 0 to 15 */
 697	dev_priv->vbt.psr.idle_frames = psr_table->idle_frames < 0 ? 0 :
 698		psr_table->idle_frames > 15 ? 15 : psr_table->idle_frames;
 699
 700	switch (psr_table->lines_to_wait) {
 701	case 0:
 702		dev_priv->vbt.psr.lines_to_wait = PSR_0_LINES_TO_WAIT;
 703		break;
 704	case 1:
 705		dev_priv->vbt.psr.lines_to_wait = PSR_1_LINE_TO_WAIT;
 706		break;
 707	case 2:
 708		dev_priv->vbt.psr.lines_to_wait = PSR_4_LINES_TO_WAIT;
 709		break;
 710	case 3:
 711		dev_priv->vbt.psr.lines_to_wait = PSR_8_LINES_TO_WAIT;
 712		break;
 713	default:
 714		DRM_DEBUG_KMS("VBT has unknown PSR lines to wait %u\n",
 715			      psr_table->lines_to_wait);
 716		break;
 717	}
 718
 719	/*
 720	 * New psr options 0=500us, 1=100us, 2=2500us, 3=0us
 721	 * Old decimal value is wake up time in multiples of 100 us.
 722	 */
 723	if (bdb->version >= 205 &&
 724	    (IS_GEN9_BC(dev_priv) || IS_GEMINILAKE(dev_priv) ||
 725	     INTEL_GEN(dev_priv) >= 10)) {
 726		switch (psr_table->tp1_wakeup_time) {
 727		case 0:
 728			dev_priv->vbt.psr.tp1_wakeup_time_us = 500;
 729			break;
 730		case 1:
 731			dev_priv->vbt.psr.tp1_wakeup_time_us = 100;
 732			break;
 733		case 3:
 734			dev_priv->vbt.psr.tp1_wakeup_time_us = 0;
 735			break;
 736		default:
 737			DRM_DEBUG_KMS("VBT tp1 wakeup time value %d is outside range[0-3], defaulting to max value 2500us\n",
 738					psr_table->tp1_wakeup_time);
 739			/* fallthrough */
 
 740		case 2:
 741			dev_priv->vbt.psr.tp1_wakeup_time_us = 2500;
 742			break;
 743		}
 744
 745		switch (psr_table->tp2_tp3_wakeup_time) {
 746		case 0:
 747			dev_priv->vbt.psr.tp2_tp3_wakeup_time_us = 500;
 748			break;
 749		case 1:
 750			dev_priv->vbt.psr.tp2_tp3_wakeup_time_us = 100;
 751			break;
 752		case 3:
 753			dev_priv->vbt.psr.tp2_tp3_wakeup_time_us = 0;
 754			break;
 755		default:
 756			DRM_DEBUG_KMS("VBT tp2_tp3 wakeup time value %d is outside range[0-3], defaulting to max value 2500us\n",
 757					psr_table->tp2_tp3_wakeup_time);
 758			/* fallthrough */
 
 759		case 2:
 760			dev_priv->vbt.psr.tp2_tp3_wakeup_time_us = 2500;
 761		break;
 762		}
 763	} else {
 764		dev_priv->vbt.psr.tp1_wakeup_time_us = psr_table->tp1_wakeup_time * 100;
 765		dev_priv->vbt.psr.tp2_tp3_wakeup_time_us = psr_table->tp2_tp3_wakeup_time * 100;
 766	}
 767
 768	if (bdb->version >= 226) {
 769		u32 wakeup_time = psr->psr2_tp2_tp3_wakeup_time;
 770
 771		wakeup_time = (wakeup_time >> (2 * panel_type)) & 0x3;
 772		switch (wakeup_time) {
 773		case 0:
 774			wakeup_time = 500;
 775			break;
 776		case 1:
 777			wakeup_time = 100;
 778			break;
 779		case 3:
 780			wakeup_time = 50;
 781			break;
 782		default:
 783		case 2:
 784			wakeup_time = 2500;
 785			break;
 786		}
 787		dev_priv->vbt.psr.psr2_tp2_tp3_wakeup_time_us = wakeup_time;
 788	} else {
 789		/* Reusing PSR1 wakeup time for PSR2 in older VBTs */
 790		dev_priv->vbt.psr.psr2_tp2_tp3_wakeup_time_us = dev_priv->vbt.psr.tp2_tp3_wakeup_time_us;
 791	}
 792}
 793
 794static void parse_dsi_backlight_ports(struct drm_i915_private *dev_priv,
 795				      u16 version, enum port port)
 
 796{
 797	if (!dev_priv->vbt.dsi.config->dual_link || version < 197) {
 798		dev_priv->vbt.dsi.bl_ports = BIT(port);
 799		if (dev_priv->vbt.dsi.config->cabc_supported)
 800			dev_priv->vbt.dsi.cabc_ports = BIT(port);
 
 
 801
 802		return;
 803	}
 804
 805	switch (dev_priv->vbt.dsi.config->dl_dcs_backlight_ports) {
 806	case DL_DCS_PORT_A:
 807		dev_priv->vbt.dsi.bl_ports = BIT(PORT_A);
 808		break;
 809	case DL_DCS_PORT_C:
 810		dev_priv->vbt.dsi.bl_ports = BIT(PORT_C);
 811		break;
 812	default:
 813	case DL_DCS_PORT_A_AND_C:
 814		dev_priv->vbt.dsi.bl_ports = BIT(PORT_A) | BIT(PORT_C);
 815		break;
 816	}
 817
 818	if (!dev_priv->vbt.dsi.config->cabc_supported)
 819		return;
 820
 821	switch (dev_priv->vbt.dsi.config->dl_dcs_cabc_ports) {
 822	case DL_DCS_PORT_A:
 823		dev_priv->vbt.dsi.cabc_ports = BIT(PORT_A);
 824		break;
 825	case DL_DCS_PORT_C:
 826		dev_priv->vbt.dsi.cabc_ports = BIT(PORT_C);
 827		break;
 828	default:
 829	case DL_DCS_PORT_A_AND_C:
 830		dev_priv->vbt.dsi.cabc_ports =
 831					BIT(PORT_A) | BIT(PORT_C);
 832		break;
 833	}
 834}
 835
 836static void
 837parse_mipi_config(struct drm_i915_private *dev_priv,
 838		  const struct bdb_header *bdb)
 839{
 840	const struct bdb_mipi_config *start;
 841	const struct mipi_config *config;
 842	const struct mipi_pps_data *pps;
 843	int panel_type = dev_priv->vbt.panel_type;
 844	enum port port;
 845
 846	/* parse MIPI blocks only if LFP type is MIPI */
 847	if (!intel_bios_is_dsi_present(dev_priv, &port))
 848		return;
 849
 850	/* Initialize this to undefined indicating no generic MIPI support */
 851	dev_priv->vbt.dsi.panel_id = MIPI_DSI_UNDEFINED_PANEL_ID;
 852
 853	/* Block #40 is already parsed and panel_fixed_mode is
 854	 * stored in dev_priv->lfp_lvds_vbt_mode
 855	 * resuse this when needed
 856	 */
 857
 858	/* Parse #52 for panel index used from panel_type already
 859	 * parsed
 860	 */
 861	start = find_section(bdb, BDB_MIPI_CONFIG);
 862	if (!start) {
 863		DRM_DEBUG_KMS("No MIPI config BDB found");
 864		return;
 865	}
 866
 867	DRM_DEBUG_DRIVER("Found MIPI Config block, panel index = %d\n",
 868								panel_type);
 869
 870	/*
 871	 * get hold of the correct configuration block and pps data as per
 872	 * the panel_type as index
 873	 */
 874	config = &start->config[panel_type];
 875	pps = &start->pps[panel_type];
 876
 877	/* store as of now full data. Trim when we realise all is not needed */
 878	dev_priv->vbt.dsi.config = kmemdup(config, sizeof(struct mipi_config), GFP_KERNEL);
 879	if (!dev_priv->vbt.dsi.config)
 880		return;
 881
 882	dev_priv->vbt.dsi.pps = kmemdup(pps, sizeof(struct mipi_pps_data), GFP_KERNEL);
 883	if (!dev_priv->vbt.dsi.pps) {
 884		kfree(dev_priv->vbt.dsi.config);
 885		return;
 886	}
 887
 888	parse_dsi_backlight_ports(dev_priv, bdb->version, port);
 889
 890	/* FIXME is the 90 vs. 270 correct? */
 891	switch (config->rotation) {
 892	case ENABLE_ROTATION_0:
 893		/*
 894		 * Most (all?) VBTs claim 0 degrees despite having
 895		 * an upside down panel, thus we do not trust this.
 896		 */
 897		dev_priv->vbt.dsi.orientation =
 898			DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
 899		break;
 900	case ENABLE_ROTATION_90:
 901		dev_priv->vbt.dsi.orientation =
 902			DRM_MODE_PANEL_ORIENTATION_RIGHT_UP;
 903		break;
 904	case ENABLE_ROTATION_180:
 905		dev_priv->vbt.dsi.orientation =
 906			DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP;
 907		break;
 908	case ENABLE_ROTATION_270:
 909		dev_priv->vbt.dsi.orientation =
 910			DRM_MODE_PANEL_ORIENTATION_LEFT_UP;
 911		break;
 912	}
 913
 914	/* We have mandatory mipi config blocks. Initialize as generic panel */
 915	dev_priv->vbt.dsi.panel_id = MIPI_DSI_GENERIC_PANEL_ID;
 916}
 917
 918/* Find the sequence block and size for the given panel. */
 919static const u8 *
 920find_panel_sequence_block(const struct bdb_mipi_sequence *sequence,
 
 921			  u16 panel_id, u32 *seq_size)
 922{
 923	u32 total = get_blocksize(sequence);
 924	const u8 *data = &sequence->data[0];
 925	u8 current_id;
 926	u32 current_size;
 927	int header_size = sequence->version >= 3 ? 5 : 3;
 928	int index = 0;
 929	int i;
 930
 931	/* skip new block size */
 932	if (sequence->version >= 3)
 933		data += 4;
 934
 935	for (i = 0; i < MAX_MIPI_CONFIGURATIONS && index < total; i++) {
 936		if (index + header_size > total) {
 937			DRM_ERROR("Invalid sequence block (header)\n");
 938			return NULL;
 939		}
 940
 941		current_id = *(data + index);
 942		if (sequence->version >= 3)
 943			current_size = *((const u32 *)(data + index + 1));
 944		else
 945			current_size = *((const u16 *)(data + index + 1));
 946
 947		index += header_size;
 948
 949		if (index + current_size > total) {
 950			DRM_ERROR("Invalid sequence block\n");
 951			return NULL;
 952		}
 953
 954		if (current_id == panel_id) {
 955			*seq_size = current_size;
 956			return data + index;
 957		}
 958
 959		index += current_size;
 960	}
 961
 962	DRM_ERROR("Sequence block detected but no valid configuration\n");
 963
 964	return NULL;
 965}
 966
 967static int goto_next_sequence(const u8 *data, int index, int total)
 
 968{
 969	u16 len;
 970
 971	/* Skip Sequence Byte. */
 972	for (index = index + 1; index < total; index += len) {
 973		u8 operation_byte = *(data + index);
 974		index++;
 975
 976		switch (operation_byte) {
 977		case MIPI_SEQ_ELEM_END:
 978			return index;
 979		case MIPI_SEQ_ELEM_SEND_PKT:
 980			if (index + 4 > total)
 981				return 0;
 982
 983			len = *((const u16 *)(data + index + 2)) + 4;
 984			break;
 985		case MIPI_SEQ_ELEM_DELAY:
 986			len = 4;
 987			break;
 988		case MIPI_SEQ_ELEM_GPIO:
 989			len = 2;
 990			break;
 991		case MIPI_SEQ_ELEM_I2C:
 992			if (index + 7 > total)
 993				return 0;
 994			len = *(data + index + 6) + 7;
 995			break;
 996		default:
 997			DRM_ERROR("Unknown operation byte\n");
 998			return 0;
 999		}
1000	}
1001
1002	return 0;
1003}
1004
1005static int goto_next_sequence_v3(const u8 *data, int index, int total)
 
1006{
1007	int seq_end;
1008	u16 len;
1009	u32 size_of_sequence;
1010
1011	/*
1012	 * Could skip sequence based on Size of Sequence alone, but also do some
1013	 * checking on the structure.
1014	 */
1015	if (total < 5) {
1016		DRM_ERROR("Too small sequence size\n");
1017		return 0;
1018	}
1019
1020	/* Skip Sequence Byte. */
1021	index++;
1022
1023	/*
1024	 * Size of Sequence. Excludes the Sequence Byte and the size itself,
1025	 * includes MIPI_SEQ_ELEM_END byte, excludes the final MIPI_SEQ_END
1026	 * byte.
1027	 */
1028	size_of_sequence = *((const u32 *)(data + index));
1029	index += 4;
1030
1031	seq_end = index + size_of_sequence;
1032	if (seq_end > total) {
1033		DRM_ERROR("Invalid sequence size\n");
1034		return 0;
1035	}
1036
1037	for (; index < total; index += len) {
1038		u8 operation_byte = *(data + index);
1039		index++;
1040
1041		if (operation_byte == MIPI_SEQ_ELEM_END) {
1042			if (index != seq_end) {
1043				DRM_ERROR("Invalid element structure\n");
1044				return 0;
1045			}
1046			return index;
1047		}
1048
1049		len = *(data + index);
1050		index++;
1051
1052		/*
1053		 * FIXME: Would be nice to check elements like for v1/v2 in
1054		 * goto_next_sequence() above.
1055		 */
1056		switch (operation_byte) {
1057		case MIPI_SEQ_ELEM_SEND_PKT:
1058		case MIPI_SEQ_ELEM_DELAY:
1059		case MIPI_SEQ_ELEM_GPIO:
1060		case MIPI_SEQ_ELEM_I2C:
1061		case MIPI_SEQ_ELEM_SPI:
1062		case MIPI_SEQ_ELEM_PMIC:
1063			break;
1064		default:
1065			DRM_ERROR("Unknown operation byte %u\n",
1066				  operation_byte);
1067			break;
1068		}
1069	}
1070
1071	return 0;
1072}
1073
1074/*
1075 * Get len of pre-fixed deassert fragment from a v1 init OTP sequence,
1076 * skip all delay + gpio operands and stop at the first DSI packet op.
1077 */
1078static int get_init_otp_deassert_fragment_len(struct drm_i915_private *dev_priv)
 
1079{
1080	const u8 *data = dev_priv->vbt.dsi.sequence[MIPI_SEQ_INIT_OTP];
1081	int index, len;
1082
1083	if (WARN_ON(!data || dev_priv->vbt.dsi.seq_version != 1))
 
1084		return 0;
1085
1086	/* index = 1 to skip sequence byte */
1087	for (index = 1; data[index] != MIPI_SEQ_ELEM_END; index += len) {
1088		switch (data[index]) {
1089		case MIPI_SEQ_ELEM_SEND_PKT:
1090			return index == 1 ? 0 : index;
1091		case MIPI_SEQ_ELEM_DELAY:
1092			len = 5; /* 1 byte for operand + uint32 */
1093			break;
1094		case MIPI_SEQ_ELEM_GPIO:
1095			len = 3; /* 1 byte for op, 1 for gpio_nr, 1 for value */
1096			break;
1097		default:
1098			return 0;
1099		}
1100	}
1101
1102	return 0;
1103}
1104
1105/*
1106 * Some v1 VBT MIPI sequences do the deassert in the init OTP sequence.
1107 * The deassert must be done before calling intel_dsi_device_ready, so for
1108 * these devices we split the init OTP sequence into a deassert sequence and
1109 * the actual init OTP part.
1110 */
1111static void fixup_mipi_sequences(struct drm_i915_private *dev_priv)
 
1112{
1113	u8 *init_otp;
1114	int len;
1115
1116	/* Limit this to VLV for now. */
1117	if (!IS_VALLEYVIEW(dev_priv))
1118		return;
1119
1120	/* Limit this to v1 vid-mode sequences */
1121	if (dev_priv->vbt.dsi.config->is_cmd_mode ||
1122	    dev_priv->vbt.dsi.seq_version != 1)
1123		return;
1124
1125	/* Only do this if there are otp and assert seqs and no deassert seq */
1126	if (!dev_priv->vbt.dsi.sequence[MIPI_SEQ_INIT_OTP] ||
1127	    !dev_priv->vbt.dsi.sequence[MIPI_SEQ_ASSERT_RESET] ||
1128	    dev_priv->vbt.dsi.sequence[MIPI_SEQ_DEASSERT_RESET])
1129		return;
1130
1131	/* The deassert-sequence ends at the first DSI packet */
1132	len = get_init_otp_deassert_fragment_len(dev_priv);
1133	if (!len)
1134		return;
1135
1136	DRM_DEBUG_KMS("Using init OTP fragment to deassert reset\n");
 
1137
1138	/* Copy the fragment, update seq byte and terminate it */
1139	init_otp = (u8 *)dev_priv->vbt.dsi.sequence[MIPI_SEQ_INIT_OTP];
1140	dev_priv->vbt.dsi.deassert_seq = kmemdup(init_otp, len + 1, GFP_KERNEL);
1141	if (!dev_priv->vbt.dsi.deassert_seq)
1142		return;
1143	dev_priv->vbt.dsi.deassert_seq[0] = MIPI_SEQ_DEASSERT_RESET;
1144	dev_priv->vbt.dsi.deassert_seq[len] = MIPI_SEQ_ELEM_END;
1145	/* Use the copy for deassert */
1146	dev_priv->vbt.dsi.sequence[MIPI_SEQ_DEASSERT_RESET] =
1147		dev_priv->vbt.dsi.deassert_seq;
1148	/* Replace the last byte of the fragment with init OTP seq byte */
1149	init_otp[len - 1] = MIPI_SEQ_INIT_OTP;
1150	/* And make MIPI_MIPI_SEQ_INIT_OTP point to it */
1151	dev_priv->vbt.dsi.sequence[MIPI_SEQ_INIT_OTP] = init_otp + len - 1;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1152}
1153
1154static void
1155parse_mipi_sequence(struct drm_i915_private *dev_priv,
1156		    const struct bdb_header *bdb)
1157{
1158	int panel_type = dev_priv->vbt.panel_type;
1159	const struct bdb_mipi_sequence *sequence;
1160	const u8 *seq_data;
1161	u32 seq_size;
1162	u8 *data;
1163	int index = 0;
1164
1165	/* Only our generic panel driver uses the sequence block. */
1166	if (dev_priv->vbt.dsi.panel_id != MIPI_DSI_GENERIC_PANEL_ID)
1167		return;
1168
1169	sequence = find_section(bdb, BDB_MIPI_SEQUENCE);
1170	if (!sequence) {
1171		DRM_DEBUG_KMS("No MIPI Sequence found, parsing complete\n");
 
1172		return;
1173	}
1174
1175	/* Fail gracefully for forward incompatible sequence block. */
1176	if (sequence->version >= 4) {
1177		DRM_ERROR("Unable to parse MIPI Sequence Block v%u\n",
1178			  sequence->version);
 
1179		return;
1180	}
1181
1182	DRM_DEBUG_DRIVER("Found MIPI sequence block v%u\n", sequence->version);
 
1183
1184	seq_data = find_panel_sequence_block(sequence, panel_type, &seq_size);
1185	if (!seq_data)
1186		return;
1187
1188	data = kmemdup(seq_data, seq_size, GFP_KERNEL);
1189	if (!data)
1190		return;
1191
1192	/* Parse the sequences, store pointers to each sequence. */
1193	for (;;) {
1194		u8 seq_id = *(data + index);
1195		if (seq_id == MIPI_SEQ_END)
1196			break;
1197
1198		if (seq_id >= MIPI_SEQ_MAX) {
1199			DRM_ERROR("Unknown sequence %u\n", seq_id);
 
1200			goto err;
1201		}
1202
1203		/* Log about presence of sequences we won't run. */
1204		if (seq_id == MIPI_SEQ_TEAR_ON || seq_id == MIPI_SEQ_TEAR_OFF)
1205			DRM_DEBUG_KMS("Unsupported sequence %u\n", seq_id);
 
1206
1207		dev_priv->vbt.dsi.sequence[seq_id] = data + index;
1208
1209		if (sequence->version >= 3)
1210			index = goto_next_sequence_v3(data, index, seq_size);
1211		else
1212			index = goto_next_sequence(data, index, seq_size);
1213		if (!index) {
1214			DRM_ERROR("Invalid sequence %u\n", seq_id);
 
1215			goto err;
1216		}
1217	}
1218
1219	dev_priv->vbt.dsi.data = data;
1220	dev_priv->vbt.dsi.size = seq_size;
1221	dev_priv->vbt.dsi.seq_version = sequence->version;
1222
1223	fixup_mipi_sequences(dev_priv);
1224
1225	DRM_DEBUG_DRIVER("MIPI related VBT parsing complete\n");
1226	return;
1227
1228err:
1229	kfree(data);
1230	memset(dev_priv->vbt.dsi.sequence, 0, sizeof(dev_priv->vbt.dsi.sequence));
1231}
1232
1233static u8 translate_iboost(u8 val)
 
1234{
1235	static const u8 mapping[] = { 1, 3, 7 }; /* See VBT spec */
1236
1237	if (val >= ARRAY_SIZE(mapping)) {
1238		DRM_DEBUG_KMS("Unsupported I_boost value found in VBT (%d), display may not work properly\n", val);
1239		return 0;
1240	}
1241	return mapping[val];
1242}
1243
1244static enum port get_port_by_ddc_pin(struct drm_i915_private *i915, u8 ddc_pin)
1245{
1246	const struct ddi_vbt_port_info *info;
1247	enum port port;
1248
1249	for (port = PORT_A; port < I915_MAX_PORTS; port++) {
1250		info = &i915->vbt.ddi_port_info[port];
 
 
 
 
 
 
1251
1252		if (info->child && ddc_pin == info->alternate_ddc_pin)
1253			return port;
 
 
 
 
1254	}
1255
1256	return PORT_NONE;
1257}
1258
1259static void sanitize_ddc_pin(struct drm_i915_private *dev_priv,
1260			     enum port port)
1261{
1262	struct ddi_vbt_port_info *info = &dev_priv->vbt.ddi_port_info[port];
1263	enum port p;
1264
1265	if (!info->alternate_ddc_pin)
1266		return;
 
 
 
1267
1268	p = get_port_by_ddc_pin(dev_priv, info->alternate_ddc_pin);
1269	if (p != PORT_NONE) {
1270		DRM_DEBUG_KMS("port %c trying to use the same DDC pin (0x%x) as port %c, "
1271			      "disabling port %c DVI/HDMI support\n",
1272			      port_name(port), info->alternate_ddc_pin,
1273			      port_name(p), port_name(p));
1274
1275		/*
1276		 * If we have multiple ports supposedly sharing the
1277		 * pin, then dvi/hdmi couldn't exist on the shared
1278		 * port. Otherwise they share the same ddc bin and
1279		 * system couldn't communicate with them separately.
1280		 *
1281		 * Give inverse child device order the priority,
1282		 * last one wins. Yes, there are real machines
1283		 * (eg. Asrock B250M-HDV) where VBT has both
1284		 * port A and port E with the same AUX ch and
1285		 * we must pick port E :(
1286		 */
1287		info = &dev_priv->vbt.ddi_port_info[p];
1288
1289		info->supports_dvi = false;
1290		info->supports_hdmi = false;
1291		info->alternate_ddc_pin = 0;
1292	}
1293}
1294
1295static enum port get_port_by_aux_ch(struct drm_i915_private *i915, u8 aux_ch)
1296{
1297	const struct ddi_vbt_port_info *info;
1298	enum port port;
1299
1300	for (port = PORT_A; port < I915_MAX_PORTS; port++) {
1301		info = &i915->vbt.ddi_port_info[port];
1302
1303		if (info->child && aux_ch == info->alternate_aux_channel)
1304			return port;
 
 
1305	}
1306
1307	return PORT_NONE;
1308}
1309
1310static void sanitize_aux_ch(struct drm_i915_private *dev_priv,
1311			    enum port port)
1312{
1313	struct ddi_vbt_port_info *info = &dev_priv->vbt.ddi_port_info[port];
1314	enum port p;
1315
1316	if (!info->alternate_aux_channel)
1317		return;
1318
1319	p = get_port_by_aux_ch(dev_priv, info->alternate_aux_channel);
1320	if (p != PORT_NONE) {
1321		DRM_DEBUG_KMS("port %c trying to use the same AUX CH (0x%x) as port %c, "
1322			      "disabling port %c DP support\n",
1323			      port_name(port), info->alternate_aux_channel,
1324			      port_name(p), port_name(p));
 
 
 
 
 
1325
1326		/*
1327		 * If we have multiple ports supposedlt sharing the
1328		 * aux channel, then DP couldn't exist on the shared
1329		 * port. Otherwise they share the same aux channel
1330		 * and system couldn't communicate with them separately.
1331		 *
1332		 * Give inverse child device order the priority,
1333		 * last one wins. Yes, there are real machines
1334		 * (eg. Asrock B250M-HDV) where VBT has both
1335		 * port A and port E with the same AUX ch and
1336		 * we must pick port E :(
1337		 */
1338		info = &dev_priv->vbt.ddi_port_info[p];
1339
1340		info->supports_dp = false;
1341		info->alternate_aux_channel = 0;
1342	}
1343}
 
 
 
1344
1345static const u8 cnp_ddc_pin_map[] = {
1346	[0] = 0, /* N/A */
1347	[DDC_BUS_DDI_B] = GMBUS_PIN_1_BXT,
1348	[DDC_BUS_DDI_C] = GMBUS_PIN_2_BXT,
1349	[DDC_BUS_DDI_D] = GMBUS_PIN_4_CNP, /* sic */
1350	[DDC_BUS_DDI_F] = GMBUS_PIN_3_BXT, /* sic */
1351};
1352
1353static const u8 icp_ddc_pin_map[] = {
1354	[ICL_DDC_BUS_DDI_A] = GMBUS_PIN_1_BXT,
1355	[ICL_DDC_BUS_DDI_B] = GMBUS_PIN_2_BXT,
1356	[TGL_DDC_BUS_DDI_C] = GMBUS_PIN_3_BXT,
1357	[ICL_DDC_BUS_PORT_1] = GMBUS_PIN_9_TC1_ICP,
1358	[ICL_DDC_BUS_PORT_2] = GMBUS_PIN_10_TC2_ICP,
1359	[ICL_DDC_BUS_PORT_3] = GMBUS_PIN_11_TC3_ICP,
1360	[ICL_DDC_BUS_PORT_4] = GMBUS_PIN_12_TC4_ICP,
1361	[TGL_DDC_BUS_PORT_5] = GMBUS_PIN_13_TC5_TGP,
1362	[TGL_DDC_BUS_PORT_6] = GMBUS_PIN_14_TC6_TGP,
1363};
1364
1365static u8 map_ddc_pin(struct drm_i915_private *dev_priv, u8 vbt_pin)
1366{
1367	const u8 *ddc_pin_map;
1368	int n_entries;
 
 
 
1369
1370	if (INTEL_PCH_TYPE(dev_priv) >= PCH_ICP) {
 
 
 
 
 
 
 
 
 
 
 
 
1371		ddc_pin_map = icp_ddc_pin_map;
1372		n_entries = ARRAY_SIZE(icp_ddc_pin_map);
1373	} else if (HAS_PCH_CNP(dev_priv)) {
1374		ddc_pin_map = cnp_ddc_pin_map;
1375		n_entries = ARRAY_SIZE(cnp_ddc_pin_map);
1376	} else {
1377		/* Assuming direct map */
1378		return vbt_pin;
1379	}
1380
1381	if (vbt_pin < n_entries && ddc_pin_map[vbt_pin] != 0)
1382		return ddc_pin_map[vbt_pin];
 
 
1383
1384	DRM_DEBUG_KMS("Ignoring alternate pin: VBT claims DDC pin %d, which is not valid for this platform\n",
1385		      vbt_pin);
 
1386	return 0;
1387}
1388
1389static enum port dvo_port_to_port(u8 dvo_port)
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1390{
1391	/*
1392	 * Each DDI port can have more than one value on the "DVO Port" field,
1393	 * so look for all the possible values for each port.
1394	 */
1395	static const int dvo_ports[][3] = {
1396		[PORT_A] = { DVO_PORT_HDMIA, DVO_PORT_DPA, -1},
1397		[PORT_B] = { DVO_PORT_HDMIB, DVO_PORT_DPB, -1},
1398		[PORT_C] = { DVO_PORT_HDMIC, DVO_PORT_DPC, -1},
1399		[PORT_D] = { DVO_PORT_HDMID, DVO_PORT_DPD, -1},
1400		[PORT_E] = { DVO_PORT_CRT, DVO_PORT_HDMIE, DVO_PORT_DPE},
1401		[PORT_F] = { DVO_PORT_HDMIF, DVO_PORT_DPF, -1},
1402	};
1403	enum port port;
1404	int i;
1405
1406	for (port = PORT_A; port < ARRAY_SIZE(dvo_ports); port++) {
1407		for (i = 0; i < ARRAY_SIZE(dvo_ports[port]); i++) {
1408			if (dvo_ports[port][i] == -1)
1409				break;
1410
1411			if (dvo_port == dvo_ports[port][i])
1412				return port;
1413		}
1414	}
1415
1416	return PORT_NONE;
1417}
1418
1419static void parse_ddi_port(struct drm_i915_private *dev_priv,
1420			   const struct child_device_config *child,
1421			   u8 bdb_version)
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1422{
1423	struct ddi_vbt_port_info *info;
1424	bool is_dvi, is_hdmi, is_dp, is_edp, is_crt;
1425	enum port port;
1426
1427	port = dvo_port_to_port(child->dvo_port);
1428	if (port == PORT_NONE)
1429		return;
1430
1431	info = &dev_priv->vbt.ddi_port_info[port];
 
1432
1433	if (info->child) {
1434		DRM_DEBUG_KMS("More than one child device for port %c in VBT, using the first.\n",
1435			      port_name(port));
1436		return;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1437	}
 
1438
1439	is_dvi = child->device_type & DEVICE_TYPE_TMDS_DVI_SIGNALING;
1440	is_dp = child->device_type & DEVICE_TYPE_DISPLAYPORT_OUTPUT;
1441	is_crt = child->device_type & DEVICE_TYPE_ANALOG_OUTPUT;
1442	is_hdmi = is_dvi && (child->device_type & DEVICE_TYPE_NOT_HDMI_OUTPUT) == 0;
1443	is_edp = is_dp && (child->device_type & DEVICE_TYPE_INTERNAL_CONNECTOR);
1444
1445	if (port == PORT_A && is_dvi) {
1446		DRM_DEBUG_KMS("VBT claims port A supports DVI%s, ignoring\n",
1447			      is_hdmi ? "/HDMI" : "");
1448		is_dvi = false;
1449		is_hdmi = false;
1450	}
1451
1452	info->supports_dvi = is_dvi;
1453	info->supports_hdmi = is_hdmi;
1454	info->supports_dp = is_dp;
1455	info->supports_edp = is_edp;
1456
1457	if (bdb_version >= 195)
1458		info->supports_typec_usb = child->dp_usb_type_c;
1459
1460	if (bdb_version >= 209)
1461		info->supports_tbt = child->tbt;
1462
1463	DRM_DEBUG_KMS("Port %c VBT info: CRT:%d DVI:%d HDMI:%d DP:%d eDP:%d LSPCON:%d USB-Type-C:%d TBT:%d\n",
1464		      port_name(port), is_crt, is_dvi, is_hdmi, is_dp, is_edp,
1465		      HAS_LSPCON(dev_priv) && child->lspcon,
1466		      info->supports_typec_usb, info->supports_tbt);
1467
1468	if (is_edp && is_dvi)
1469		DRM_DEBUG_KMS("Internal DP port %c is TMDS compatible\n",
1470			      port_name(port));
1471	if (is_crt && port != PORT_E)
1472		DRM_DEBUG_KMS("Port %c is analog\n", port_name(port));
1473	if (is_crt && (is_dvi || is_dp))
1474		DRM_DEBUG_KMS("Analog port %c is also DP or TMDS compatible\n",
1475			      port_name(port));
1476	if (is_dvi && (port == PORT_A || port == PORT_E))
1477		DRM_DEBUG_KMS("Port %c is TMDS compatible\n", port_name(port));
1478	if (!is_dvi && !is_dp && !is_crt)
1479		DRM_DEBUG_KMS("Port %c is not DP/TMDS/CRT compatible\n",
1480			      port_name(port));
1481	if (is_edp && (port == PORT_B || port == PORT_C || port == PORT_E))
1482		DRM_DEBUG_KMS("Port %c is internal DP\n", port_name(port));
1483
1484	if (is_dvi) {
1485		u8 ddc_pin;
1486
1487		ddc_pin = map_ddc_pin(dev_priv, child->ddc_pin);
1488		if (intel_gmbus_is_valid_pin(dev_priv, ddc_pin)) {
1489			info->alternate_ddc_pin = ddc_pin;
1490			sanitize_ddc_pin(dev_priv, port);
1491		} else {
1492			DRM_DEBUG_KMS("Port %c has invalid DDC pin %d, "
1493				      "sticking to defaults\n",
1494				      port_name(port), ddc_pin);
1495		}
1496	}
 
1497
1498	if (is_dp) {
1499		info->alternate_aux_channel = child->aux_channel;
 
 
1500
1501		sanitize_aux_ch(dev_priv, port);
1502	}
 
 
 
1503
1504	if (bdb_version >= 158) {
1505		/* The VBT HDMI level shift values match the table we have. */
1506		u8 hdmi_level_shift = child->hdmi_level_shifter_value;
1507		DRM_DEBUG_KMS("VBT HDMI level shift for port %c: %d\n",
1508			      port_name(port),
1509			      hdmi_level_shift);
1510		info->hdmi_level_shift = hdmi_level_shift;
1511	}
1512
1513	if (bdb_version >= 204) {
1514		int max_tmds_clock;
1515
1516		switch (child->hdmi_max_data_rate) {
1517		default:
1518			MISSING_CASE(child->hdmi_max_data_rate);
1519			/* fall through */
1520		case HDMI_MAX_DATA_RATE_PLATFORM:
1521			max_tmds_clock = 0;
1522			break;
1523		case HDMI_MAX_DATA_RATE_297:
1524			max_tmds_clock = 297000;
1525			break;
1526		case HDMI_MAX_DATA_RATE_165:
1527			max_tmds_clock = 165000;
1528			break;
1529		}
1530
1531		if (max_tmds_clock)
1532			DRM_DEBUG_KMS("VBT HDMI max TMDS clock for port %c: %d kHz\n",
1533				      port_name(port), max_tmds_clock);
1534		info->max_tmds_clock = max_tmds_clock;
1535	}
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1536
1537	/* Parse the I_boost config for SKL and above */
1538	if (bdb_version >= 196 && child->iboost) {
1539		info->dp_boost_level = translate_iboost(child->dp_iboost_level);
1540		DRM_DEBUG_KMS("VBT (e)DP boost level for port %c: %d\n",
1541			      port_name(port), info->dp_boost_level);
1542		info->hdmi_boost_level = translate_iboost(child->hdmi_iboost_level);
1543		DRM_DEBUG_KMS("VBT HDMI boost level for port %c: %d\n",
1544			      port_name(port), info->hdmi_boost_level);
 
 
 
 
 
1545	}
 
1546
1547	/* DP max link rate for CNL+ */
1548	if (bdb_version >= 216) {
1549		switch (child->dp_max_link_rate) {
1550		default:
1551		case VBT_DP_MAX_LINK_RATE_HBR3:
1552			info->dp_max_link_rate = 810000;
1553			break;
1554		case VBT_DP_MAX_LINK_RATE_HBR2:
1555			info->dp_max_link_rate = 540000;
1556			break;
1557		case VBT_DP_MAX_LINK_RATE_HBR:
1558			info->dp_max_link_rate = 270000;
1559			break;
1560		case VBT_DP_MAX_LINK_RATE_LBR:
1561			info->dp_max_link_rate = 162000;
1562			break;
1563		}
1564		DRM_DEBUG_KMS("VBT DP max link rate for port %c: %d\n",
1565			      port_name(port), info->dp_max_link_rate);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1566	}
 
 
 
 
 
 
 
 
 
 
 
1567
1568	info->child = child;
1569}
1570
1571static void parse_ddi_ports(struct drm_i915_private *dev_priv, u8 bdb_version)
1572{
1573	const struct child_device_config *child;
1574	int i;
 
 
 
1575
1576	if (!HAS_DDI(dev_priv) && !IS_CHERRYVIEW(dev_priv))
 
1577		return;
1578
1579	if (bdb_version < 155)
1580		return;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1581
1582	for (i = 0; i < dev_priv->vbt.child_dev_num; i++) {
1583		child = dev_priv->vbt.child_dev + i;
 
 
 
 
 
 
 
 
 
 
 
1584
1585		parse_ddi_port(dev_priv, child, bdb_version);
 
 
 
 
 
 
 
 
1586	}
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1587}
1588
1589static void
1590parse_general_definitions(struct drm_i915_private *dev_priv,
1591			  const struct bdb_header *bdb)
1592{
1593	const struct bdb_general_definitions *defs;
 
1594	const struct child_device_config *child;
1595	int i, child_device_num, count;
1596	u8 expected_size;
1597	u16 block_size;
1598	int bus_pin;
1599
1600	defs = find_section(bdb, BDB_GENERAL_DEFINITIONS);
1601	if (!defs) {
1602		DRM_DEBUG_KMS("No general definition block is found, no devices defined.\n");
 
1603		return;
1604	}
1605
1606	block_size = get_blocksize(defs);
1607	if (block_size < sizeof(*defs)) {
1608		DRM_DEBUG_KMS("General definitions block too small (%u)\n",
1609			      block_size);
 
1610		return;
1611	}
1612
1613	bus_pin = defs->crt_ddc_gmbus_pin;
1614	DRM_DEBUG_KMS("crt_ddc_bus_pin: %d\n", bus_pin);
1615	if (intel_gmbus_is_valid_pin(dev_priv, bus_pin))
1616		dev_priv->vbt.crt_ddc_pin = bus_pin;
1617
1618	if (bdb->version < 106) {
1619		expected_size = 22;
1620	} else if (bdb->version < 111) {
1621		expected_size = 27;
1622	} else if (bdb->version < 195) {
1623		expected_size = LEGACY_CHILD_DEVICE_CONFIG_SIZE;
1624	} else if (bdb->version == 195) {
1625		expected_size = 37;
1626	} else if (bdb->version <= 215) {
1627		expected_size = 38;
1628	} else if (bdb->version <= 216) {
1629		expected_size = 39;
1630	} else {
1631		expected_size = sizeof(*child);
1632		BUILD_BUG_ON(sizeof(*child) < 39);
1633		DRM_DEBUG_DRIVER("Expected child device config size for VBT version %u not known; assuming %u\n",
1634				 bdb->version, expected_size);
 
1635	}
1636
1637	/* Flag an error for unexpected size, but continue anyway. */
1638	if (defs->child_dev_size != expected_size)
1639		DRM_ERROR("Unexpected child device config size %u (expected %u for VBT version %u)\n",
1640			  defs->child_dev_size, expected_size, bdb->version);
 
1641
1642	/* The legacy sized child device config is the minimum we need. */
1643	if (defs->child_dev_size < LEGACY_CHILD_DEVICE_CONFIG_SIZE) {
1644		DRM_DEBUG_KMS("Child device config size %u is too small.\n",
1645			      defs->child_dev_size);
 
1646		return;
1647	}
1648
1649	/* get the number of child device */
1650	child_device_num = (block_size - sizeof(*defs)) / defs->child_dev_size;
1651	count = 0;
1652	/* get the number of child device that is present */
1653	for (i = 0; i < child_device_num; i++) {
1654		child = child_device_ptr(defs, i);
1655		if (!child->device_type)
1656			continue;
1657		count++;
1658	}
1659	if (!count) {
1660		DRM_DEBUG_KMS("no child dev is parsed from VBT\n");
1661		return;
1662	}
1663	dev_priv->vbt.child_dev = kcalloc(count, sizeof(*child), GFP_KERNEL);
1664	if (!dev_priv->vbt.child_dev) {
1665		DRM_DEBUG_KMS("No memory space for child device\n");
1666		return;
1667	}
1668
1669	dev_priv->vbt.child_dev_num = count;
1670	count = 0;
1671	for (i = 0; i < child_device_num; i++) {
1672		child = child_device_ptr(defs, i);
1673		if (!child->device_type)
1674			continue;
1675
1676		DRM_DEBUG_KMS("Found VBT child device with type 0x%x\n",
1677			      child->device_type);
 
 
 
 
 
 
 
1678
1679		/*
1680		 * Copy as much as we know (sizeof) and is available
1681		 * (child_dev_size) of the child device. Accessing the data must
1682		 * depend on VBT version.
1683		 */
1684		memcpy(dev_priv->vbt.child_dev + count, child,
1685		       min_t(size_t, defs->child_dev_size, sizeof(*child)));
1686		count++;
 
1687	}
 
 
 
 
1688}
1689
1690/* Common defaults which may be overridden by VBT. */
1691static void
1692init_vbt_defaults(struct drm_i915_private *dev_priv)
1693{
1694	enum port port;
1695
1696	dev_priv->vbt.crt_ddc_pin = GMBUS_PIN_VGADDC;
1697
1698	/* Default to having backlight */
1699	dev_priv->vbt.backlight.present = true;
1700
1701	/* LFP panel data */
1702	dev_priv->vbt.lvds_dither = 1;
1703
1704	/* SDVO panel data */
1705	dev_priv->vbt.sdvo_lvds_vbt_mode = NULL;
1706
1707	/* general features */
1708	dev_priv->vbt.int_tv_support = 1;
1709	dev_priv->vbt.int_crt_support = 1;
1710
1711	/* driver features */
1712	dev_priv->vbt.int_lvds_support = 1;
1713
1714	/* Default to using SSC */
1715	dev_priv->vbt.lvds_use_ssc = 1;
1716	/*
1717	 * Core/SandyBridge/IvyBridge use alternative (120MHz) reference
1718	 * clock for LVDS.
1719	 */
1720	dev_priv->vbt.lvds_ssc_freq = intel_bios_ssc_frequency(dev_priv,
1721			!HAS_PCH_SPLIT(dev_priv));
1722	DRM_DEBUG_KMS("Set default to SSC at %d kHz\n", dev_priv->vbt.lvds_ssc_freq);
1723
1724	for (port = PORT_A; port < I915_MAX_PORTS; port++) {
1725		struct ddi_vbt_port_info *info =
1726			&dev_priv->vbt.ddi_port_info[port];
1727
1728		info->hdmi_level_shift = HDMI_LEVEL_SHIFT_UNKNOWN;
1729	}
 
 
 
 
 
 
 
1730}
1731
1732/* Defaults to initialize only if there is no VBT. */
1733static void
1734init_vbt_missing_defaults(struct drm_i915_private *dev_priv)
1735{
1736	enum port port;
 
 
1737
1738	for (port = PORT_A; port < I915_MAX_PORTS; port++) {
1739		struct ddi_vbt_port_info *info =
1740			&dev_priv->vbt.ddi_port_info[port];
1741		enum phy phy = intel_port_to_phy(dev_priv, port);
 
 
 
1742
1743		/*
1744		 * VBT has the TypeC mode (native,TBT/USB) and we don't want
1745		 * to detect it.
1746		 */
1747		if (intel_phy_is_tc(dev_priv, phy))
1748			continue;
1749
1750		info->supports_dvi = (port != PORT_A && port != PORT_E);
1751		info->supports_hdmi = info->supports_dvi;
1752		info->supports_dp = (port != PORT_E);
1753		info->supports_edp = (port == PORT_A);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1754	}
 
 
 
1755}
1756
1757static const struct bdb_header *get_bdb_header(const struct vbt_header *vbt)
1758{
1759	const void *_vbt = vbt;
1760
1761	return _vbt + vbt->bdb_offset;
1762}
1763
1764/**
1765 * intel_bios_is_valid_vbt - does the given buffer contain a valid VBT
 
1766 * @buf:	pointer to a buffer to validate
1767 * @size:	size of the buffer
1768 *
1769 * Returns true on valid VBT.
1770 */
1771bool intel_bios_is_valid_vbt(const void *buf, size_t size)
 
1772{
1773	const struct vbt_header *vbt = buf;
1774	const struct bdb_header *bdb;
1775
1776	if (!vbt)
1777		return false;
1778
1779	if (sizeof(struct vbt_header) > size) {
1780		DRM_DEBUG_DRIVER("VBT header incomplete\n");
1781		return false;
1782	}
1783
1784	if (memcmp(vbt->signature, "$VBT", 4)) {
1785		DRM_DEBUG_DRIVER("VBT invalid signature\n");
 
 
 
 
 
1786		return false;
1787	}
1788
 
 
1789	if (range_overflows_t(size_t,
1790			      vbt->bdb_offset,
1791			      sizeof(struct bdb_header),
1792			      size)) {
1793		DRM_DEBUG_DRIVER("BDB header incomplete\n");
1794		return false;
1795	}
1796
1797	bdb = get_bdb_header(vbt);
1798	if (range_overflows_t(size_t, vbt->bdb_offset, bdb->bdb_size, size)) {
1799		DRM_DEBUG_DRIVER("BDB incomplete\n");
1800		return false;
1801	}
1802
1803	return vbt;
1804}
1805
1806static const struct vbt_header *find_vbt(void __iomem *bios, size_t size)
1807{
1808	size_t i;
1809
1810	/* Scour memory looking for the VBT signature. */
1811	for (i = 0; i + 4 < size; i++) {
1812		void *vbt;
1813
1814		if (ioread32(bios + i) != *((const u32 *) "$VBT"))
1815			continue;
 
 
 
 
 
1816
1817		/*
1818		 * This is the one place where we explicitly discard the address
1819		 * space (__iomem) of the BIOS/VBT.
1820		 */
1821		vbt = (void __force *) bios + i;
1822		if (intel_bios_is_valid_vbt(vbt, size - i))
1823			return vbt;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1824
 
 
1825		break;
1826	}
1827
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1828	return NULL;
1829}
1830
1831/**
1832 * intel_bios_init - find VBT and initialize settings from the BIOS
1833 * @dev_priv: i915 device instance
1834 *
1835 * Parse and initialize settings from the Video BIOS Tables (VBT). If the VBT
1836 * was not found in ACPI OpRegion, try to find it in PCI ROM first. Also
1837 * initialize some defaults if the VBT is not present at all.
1838 */
1839void intel_bios_init(struct drm_i915_private *dev_priv)
1840{
1841	struct pci_dev *pdev = dev_priv->drm.pdev;
1842	const struct vbt_header *vbt = dev_priv->opregion.vbt;
1843	const struct bdb_header *bdb;
1844	u8 __iomem *bios = NULL;
1845
1846	if (!HAS_DISPLAY(dev_priv)) {
1847		DRM_DEBUG_KMS("Skipping VBT init due to disabled display.\n");
 
 
 
 
1848		return;
1849	}
1850
1851	init_vbt_defaults(dev_priv);
1852
1853	/* If the OpRegion does not have VBT, look in PCI ROM. */
1854	if (!vbt) {
1855		size_t size;
1856
1857		bios = pci_map_rom(pdev, &size);
1858		if (!bios)
1859			goto out;
1860
1861		vbt = find_vbt(bios, size);
1862		if (!vbt)
1863			goto out;
 
 
 
 
 
1864
1865		DRM_DEBUG_KMS("Found valid VBT in PCI ROM\n");
 
 
1866	}
1867
 
 
 
1868	bdb = get_bdb_header(vbt);
 
1869
1870	DRM_DEBUG_KMS("VBT signature \"%.*s\", BDB version %d\n",
1871		      (int)sizeof(vbt->signature), vbt->signature, bdb->version);
 
 
 
1872
1873	/* Grab useful general definitions */
1874	parse_general_features(dev_priv, bdb);
1875	parse_general_definitions(dev_priv, bdb);
1876	parse_lfp_panel_data(dev_priv, bdb);
1877	parse_lfp_backlight(dev_priv, bdb);
1878	parse_sdvo_panel_data(dev_priv, bdb);
1879	parse_driver_features(dev_priv, bdb);
1880	parse_edp(dev_priv, bdb);
1881	parse_psr(dev_priv, bdb);
1882	parse_mipi_config(dev_priv, bdb);
1883	parse_mipi_sequence(dev_priv, bdb);
1884
1885	/* Further processing on pre-parsed data */
1886	parse_sdvo_device_mapping(dev_priv, bdb->version);
1887	parse_ddi_ports(dev_priv, bdb->version);
1888
1889out:
1890	if (!vbt) {
1891		DRM_INFO("Failed to find VBIOS tables (VBT)\n");
1892		init_vbt_missing_defaults(dev_priv);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1893	}
1894
1895	if (bios)
1896		pci_unmap_rom(pdev, bios);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1897}
1898
1899/**
1900 * intel_bios_driver_remove - Free any resources allocated by intel_bios_init()
1901 * @dev_priv: i915 device instance
1902 */
1903void intel_bios_driver_remove(struct drm_i915_private *dev_priv)
1904{
1905	kfree(dev_priv->vbt.child_dev);
1906	dev_priv->vbt.child_dev = NULL;
1907	dev_priv->vbt.child_dev_num = 0;
1908	kfree(dev_priv->vbt.sdvo_lvds_vbt_mode);
1909	dev_priv->vbt.sdvo_lvds_vbt_mode = NULL;
1910	kfree(dev_priv->vbt.lfp_lvds_vbt_mode);
1911	dev_priv->vbt.lfp_lvds_vbt_mode = NULL;
1912	kfree(dev_priv->vbt.dsi.data);
1913	dev_priv->vbt.dsi.data = NULL;
1914	kfree(dev_priv->vbt.dsi.pps);
1915	dev_priv->vbt.dsi.pps = NULL;
1916	kfree(dev_priv->vbt.dsi.config);
1917	dev_priv->vbt.dsi.config = NULL;
1918	kfree(dev_priv->vbt.dsi.deassert_seq);
1919	dev_priv->vbt.dsi.deassert_seq = NULL;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1920}
1921
1922/**
1923 * intel_bios_is_tv_present - is integrated TV present in VBT
1924 * @dev_priv:	i915 device instance
1925 *
1926 * Return true if TV is present. If no child devices were parsed from VBT,
1927 * assume TV is present.
1928 */
1929bool intel_bios_is_tv_present(struct drm_i915_private *dev_priv)
1930{
1931	const struct child_device_config *child;
1932	int i;
1933
1934	if (!dev_priv->vbt.int_tv_support)
1935		return false;
1936
1937	if (!dev_priv->vbt.child_dev_num)
1938		return true;
1939
1940	for (i = 0; i < dev_priv->vbt.child_dev_num; i++) {
1941		child = dev_priv->vbt.child_dev + i;
 
1942		/*
1943		 * If the device type is not TV, continue.
1944		 */
1945		switch (child->device_type) {
1946		case DEVICE_TYPE_INT_TV:
1947		case DEVICE_TYPE_TV:
1948		case DEVICE_TYPE_TV_SVIDEO_COMPOSITE:
1949			break;
1950		default:
1951			continue;
1952		}
1953		/* Only when the addin_offset is non-zero, it is regarded
1954		 * as present.
1955		 */
1956		if (child->addin_offset)
1957			return true;
1958	}
1959
1960	return false;
1961}
1962
1963/**
1964 * intel_bios_is_lvds_present - is LVDS present in VBT
1965 * @dev_priv:	i915 device instance
1966 * @i2c_pin:	i2c pin for LVDS if present
1967 *
1968 * Return true if LVDS is present. If no child devices were parsed from VBT,
1969 * assume LVDS is present.
1970 */
1971bool intel_bios_is_lvds_present(struct drm_i915_private *dev_priv, u8 *i2c_pin)
1972{
1973	const struct child_device_config *child;
1974	int i;
1975
1976	if (!dev_priv->vbt.child_dev_num)
1977		return true;
1978
1979	for (i = 0; i < dev_priv->vbt.child_dev_num; i++) {
1980		child = dev_priv->vbt.child_dev + i;
1981
1982		/* If the device type is not LFP, continue.
1983		 * We have to check both the new identifiers as well as the
1984		 * old for compatibility with some BIOSes.
1985		 */
1986		if (child->device_type != DEVICE_TYPE_INT_LFP &&
1987		    child->device_type != DEVICE_TYPE_LFP)
1988			continue;
1989
1990		if (intel_gmbus_is_valid_pin(dev_priv, child->i2c_pin))
1991			*i2c_pin = child->i2c_pin;
1992
1993		/* However, we cannot trust the BIOS writers to populate
1994		 * the VBT correctly.  Since LVDS requires additional
1995		 * information from AIM blocks, a non-zero addin offset is
1996		 * a good indicator that the LVDS is actually present.
1997		 */
1998		if (child->addin_offset)
1999			return true;
2000
2001		/* But even then some BIOS writers perform some black magic
2002		 * and instantiate the device without reference to any
2003		 * additional data.  Trust that if the VBT was written into
2004		 * the OpRegion then they have validated the LVDS's existence.
2005		 */
2006		if (dev_priv->opregion.vbt)
2007			return true;
2008	}
2009
2010	return false;
2011}
2012
2013/**
2014 * intel_bios_is_port_present - is the specified digital port present
2015 * @dev_priv:	i915 device instance
2016 * @port:	port to check
2017 *
2018 * Return true if the device in %port is present.
2019 */
2020bool intel_bios_is_port_present(struct drm_i915_private *dev_priv, enum port port)
2021{
2022	const struct child_device_config *child;
2023	static const struct {
2024		u16 dp, hdmi;
2025	} port_mapping[] = {
2026		[PORT_B] = { DVO_PORT_DPB, DVO_PORT_HDMIB, },
2027		[PORT_C] = { DVO_PORT_DPC, DVO_PORT_HDMIC, },
2028		[PORT_D] = { DVO_PORT_DPD, DVO_PORT_HDMID, },
2029		[PORT_E] = { DVO_PORT_DPE, DVO_PORT_HDMIE, },
2030		[PORT_F] = { DVO_PORT_DPF, DVO_PORT_HDMIF, },
2031	};
2032	int i;
2033
2034	if (HAS_DDI(dev_priv)) {
2035		const struct ddi_vbt_port_info *port_info =
2036			&dev_priv->vbt.ddi_port_info[port];
2037
2038		return port_info->supports_dp ||
2039		       port_info->supports_dvi ||
2040		       port_info->supports_hdmi;
2041	}
2042
2043	/* FIXME maybe deal with port A as well? */
2044	if (WARN_ON(port == PORT_A) || port >= ARRAY_SIZE(port_mapping))
2045		return false;
2046
2047	if (!dev_priv->vbt.child_dev_num)
2048		return false;
2049
2050	for (i = 0; i < dev_priv->vbt.child_dev_num; i++) {
2051		child = dev_priv->vbt.child_dev + i;
2052
2053		if ((child->dvo_port == port_mapping[port].dp ||
2054		     child->dvo_port == port_mapping[port].hdmi) &&
2055		    (child->device_type & (DEVICE_TYPE_TMDS_DVI_SIGNALING |
2056					   DEVICE_TYPE_DISPLAYPORT_OUTPUT)))
2057			return true;
2058	}
2059
2060	return false;
2061}
2062
2063/**
2064 * intel_bios_is_port_edp - is the device in given port eDP
2065 * @dev_priv:	i915 device instance
2066 * @port:	port to check
2067 *
2068 * Return true if the device in %port is eDP.
2069 */
2070bool intel_bios_is_port_edp(struct drm_i915_private *dev_priv, enum port port)
2071{
2072	const struct child_device_config *child;
2073	static const short port_mapping[] = {
2074		[PORT_B] = DVO_PORT_DPB,
2075		[PORT_C] = DVO_PORT_DPC,
2076		[PORT_D] = DVO_PORT_DPD,
2077		[PORT_E] = DVO_PORT_DPE,
2078		[PORT_F] = DVO_PORT_DPF,
2079	};
2080	int i;
2081
2082	if (HAS_DDI(dev_priv))
2083		return dev_priv->vbt.ddi_port_info[port].supports_edp;
2084
2085	if (!dev_priv->vbt.child_dev_num)
 
2086		return false;
2087
2088	for (i = 0; i < dev_priv->vbt.child_dev_num; i++) {
2089		child = dev_priv->vbt.child_dev + i;
2090
2091		if (child->dvo_port == port_mapping[port] &&
2092		    (child->device_type & DEVICE_TYPE_eDP_BITS) ==
2093		    (DEVICE_TYPE_eDP & DEVICE_TYPE_eDP_BITS))
2094			return true;
2095	}
2096
2097	return false;
2098}
2099
2100static bool child_dev_is_dp_dual_mode(const struct child_device_config *child,
2101				      enum port port)
 
 
 
 
 
 
 
2102{
2103	static const struct {
2104		u16 dp, hdmi;
2105	} port_mapping[] = {
2106		/*
2107		 * Buggy VBTs may declare DP ports as having
2108		 * HDMI type dvo_port :( So let's check both.
2109		 */
2110		[PORT_B] = { DVO_PORT_DPB, DVO_PORT_HDMIB, },
2111		[PORT_C] = { DVO_PORT_DPC, DVO_PORT_HDMIC, },
2112		[PORT_D] = { DVO_PORT_DPD, DVO_PORT_HDMID, },
2113		[PORT_E] = { DVO_PORT_DPE, DVO_PORT_HDMIE, },
2114		[PORT_F] = { DVO_PORT_DPF, DVO_PORT_HDMIF, },
2115	};
2116
2117	if (port == PORT_A || port >= ARRAY_SIZE(port_mapping))
2118		return false;
 
2119
2120	if ((child->device_type & DEVICE_TYPE_DP_DUAL_MODE_BITS) !=
2121	    (DEVICE_TYPE_DP_DUAL_MODE & DEVICE_TYPE_DP_DUAL_MODE_BITS))
2122		return false;
2123
2124	if (child->dvo_port == port_mapping[port].dp)
2125		return true;
 
 
 
 
2126
2127	/* Only accept a HDMI dvo_port as DP++ if it has an AUX channel */
2128	if (child->dvo_port == port_mapping[port].hdmi &&
2129	    child->aux_channel != 0)
2130		return true;
 
2131
2132	return false;
2133}
2134
2135bool intel_bios_is_port_dp_dual_mode(struct drm_i915_private *dev_priv,
2136				     enum port port)
2137{
2138	const struct child_device_config *child;
2139	int i;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2140
2141	for (i = 0; i < dev_priv->vbt.child_dev_num; i++) {
2142		child = dev_priv->vbt.child_dev + i;
2143
2144		if (child_dev_is_dp_dual_mode(child, port))
2145			return true;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2146	}
2147
2148	return false;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2149}
2150
2151/**
2152 * intel_bios_is_dsi_present - is DSI present in VBT
2153 * @dev_priv:	i915 device instance
2154 * @port:	port for DSI if present
2155 *
2156 * Return true if DSI is present, and return the port in %port.
2157 */
2158bool intel_bios_is_dsi_present(struct drm_i915_private *dev_priv,
2159			       enum port *port)
2160{
2161	const struct child_device_config *child;
2162	u8 dvo_port;
2163	int i;
2164
2165	for (i = 0; i < dev_priv->vbt.child_dev_num; i++) {
2166		child = dev_priv->vbt.child_dev + i;
2167
2168		if (!(child->device_type & DEVICE_TYPE_MIPI_OUTPUT))
2169			continue;
2170
2171		dvo_port = child->dvo_port;
 
 
 
 
2172
2173		if (dvo_port == DVO_PORT_MIPIA ||
2174		    (dvo_port == DVO_PORT_MIPIB && INTEL_GEN(dev_priv) >= 11) ||
2175		    (dvo_port == DVO_PORT_MIPIC && INTEL_GEN(dev_priv) < 11)) {
2176			if (port)
2177				*port = dvo_port - DVO_PORT_MIPIA;
2178			return true;
2179		} else if (dvo_port == DVO_PORT_MIPIB ||
2180			   dvo_port == DVO_PORT_MIPIC ||
2181			   dvo_port == DVO_PORT_MIPID) {
2182			DRM_DEBUG_KMS("VBT has unsupported DSI port %c\n",
2183				      port_name(dvo_port - DVO_PORT_MIPIA));
2184		}
2185	}
2186
2187	return false;
2188}
2189
2190/**
2191 * intel_bios_is_port_hpd_inverted - is HPD inverted for %port
2192 * @i915:	i915 device instance
2193 * @port:	port to check
2194 *
2195 * Return true if HPD should be inverted for %port.
 
 
 
 
 
 
 
 
 
2196 */
2197bool
2198intel_bios_is_port_hpd_inverted(const struct drm_i915_private *i915,
2199				enum port port)
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2200{
2201	const struct child_device_config *child =
2202		i915->vbt.ddi_port_info[port].child;
2203
2204	if (WARN_ON_ONCE(!IS_GEN9_LP(i915)))
2205		return false;
 
 
 
 
 
 
 
 
 
 
 
2206
2207	return child && child->hpd_invert;
 
 
 
 
 
 
 
 
 
2208}
2209
2210/**
2211 * intel_bios_is_lspcon_present - if LSPCON is attached on %port
2212 * @i915:	i915 device instance
2213 * @port:	port to check
2214 *
2215 * Return true if LSPCON is present on this port
2216 */
2217bool
2218intel_bios_is_lspcon_present(const struct drm_i915_private *i915,
2219			     enum port port)
2220{
2221	const struct child_device_config *child =
2222		i915->vbt.ddi_port_info[port].child;
2223
2224	return HAS_LSPCON(i915) && child && child->lspcon;
2225}
2226
2227enum aux_ch intel_bios_port_aux_ch(struct drm_i915_private *dev_priv,
2228				   enum port port)
2229{
2230	const struct ddi_vbt_port_info *info =
2231		&dev_priv->vbt.ddi_port_info[port];
2232	enum aux_ch aux_ch;
 
 
 
2233
2234	if (!info->alternate_aux_channel) {
2235		aux_ch = (enum aux_ch)port;
2236
2237		DRM_DEBUG_KMS("using AUX %c for port %c (platform default)\n",
2238			      aux_ch_name(aux_ch), port_name(port));
2239		return aux_ch;
 
2240	}
2241
2242	switch (info->alternate_aux_channel) {
2243	case DP_AUX_A:
2244		aux_ch = AUX_CH_A;
2245		break;
2246	case DP_AUX_B:
2247		aux_ch = AUX_CH_B;
2248		break;
2249	case DP_AUX_C:
2250		aux_ch = AUX_CH_C;
2251		break;
2252	case DP_AUX_D:
2253		aux_ch = AUX_CH_D;
2254		break;
2255	case DP_AUX_E:
2256		aux_ch = AUX_CH_E;
2257		break;
2258	case DP_AUX_F:
2259		aux_ch = AUX_CH_F;
2260		break;
2261	default:
2262		MISSING_CASE(info->alternate_aux_channel);
2263		aux_ch = AUX_CH_A;
2264		break;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2265	}
2266
2267	DRM_DEBUG_KMS("using AUX %c for port %c (VBT)\n",
2268		      aux_ch_name(aux_ch), port_name(port));
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2269
2270	return aux_ch;
 
2271}