Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Generic pidhash and scalable, time-bounded PID allocator
4 *
5 * (C) 2002-2003 Nadia Yvette Chambers, IBM
6 * (C) 2004 Nadia Yvette Chambers, Oracle
7 * (C) 2002-2004 Ingo Molnar, Red Hat
8 *
9 * pid-structures are backing objects for tasks sharing a given ID to chain
10 * against. There is very little to them aside from hashing them and
11 * parking tasks using given ID's on a list.
12 *
13 * The hash is always changed with the tasklist_lock write-acquired,
14 * and the hash is only accessed with the tasklist_lock at least
15 * read-acquired, so there's no additional SMP locking needed here.
16 *
17 * We have a list of bitmap pages, which bitmaps represent the PID space.
18 * Allocating and freeing PIDs is completely lockless. The worst-case
19 * allocation scenario when all but one out of 1 million PIDs possible are
20 * allocated already: the scanning of 32 list entries and at most PAGE_SIZE
21 * bytes. The typical fastpath is a single successful setbit. Freeing is O(1).
22 *
23 * Pid namespaces:
24 * (C) 2007 Pavel Emelyanov <xemul@openvz.org>, OpenVZ, SWsoft Inc.
25 * (C) 2007 Sukadev Bhattiprolu <sukadev@us.ibm.com>, IBM
26 * Many thanks to Oleg Nesterov for comments and help
27 *
28 */
29
30#include <linux/mm.h>
31#include <linux/export.h>
32#include <linux/slab.h>
33#include <linux/init.h>
34#include <linux/rculist.h>
35#include <linux/memblock.h>
36#include <linux/pid_namespace.h>
37#include <linux/init_task.h>
38#include <linux/syscalls.h>
39#include <linux/proc_ns.h>
40#include <linux/refcount.h>
41#include <linux/anon_inodes.h>
42#include <linux/sched/signal.h>
43#include <linux/sched/task.h>
44#include <linux/idr.h>
45
46struct pid init_struct_pid = {
47 .count = REFCOUNT_INIT(1),
48 .tasks = {
49 { .first = NULL },
50 { .first = NULL },
51 { .first = NULL },
52 },
53 .level = 0,
54 .numbers = { {
55 .nr = 0,
56 .ns = &init_pid_ns,
57 }, }
58};
59
60int pid_max = PID_MAX_DEFAULT;
61
62#define RESERVED_PIDS 300
63
64int pid_max_min = RESERVED_PIDS + 1;
65int pid_max_max = PID_MAX_LIMIT;
66
67/*
68 * PID-map pages start out as NULL, they get allocated upon
69 * first use and are never deallocated. This way a low pid_max
70 * value does not cause lots of bitmaps to be allocated, but
71 * the scheme scales to up to 4 million PIDs, runtime.
72 */
73struct pid_namespace init_pid_ns = {
74 .kref = KREF_INIT(2),
75 .idr = IDR_INIT(init_pid_ns.idr),
76 .pid_allocated = PIDNS_ADDING,
77 .level = 0,
78 .child_reaper = &init_task,
79 .user_ns = &init_user_ns,
80 .ns.inum = PROC_PID_INIT_INO,
81#ifdef CONFIG_PID_NS
82 .ns.ops = &pidns_operations,
83#endif
84};
85EXPORT_SYMBOL_GPL(init_pid_ns);
86
87/*
88 * Note: disable interrupts while the pidmap_lock is held as an
89 * interrupt might come in and do read_lock(&tasklist_lock).
90 *
91 * If we don't disable interrupts there is a nasty deadlock between
92 * detach_pid()->free_pid() and another cpu that does
93 * spin_lock(&pidmap_lock) followed by an interrupt routine that does
94 * read_lock(&tasklist_lock);
95 *
96 * After we clean up the tasklist_lock and know there are no
97 * irq handlers that take it we can leave the interrupts enabled.
98 * For now it is easier to be safe than to prove it can't happen.
99 */
100
101static __cacheline_aligned_in_smp DEFINE_SPINLOCK(pidmap_lock);
102
103void put_pid(struct pid *pid)
104{
105 struct pid_namespace *ns;
106
107 if (!pid)
108 return;
109
110 ns = pid->numbers[pid->level].ns;
111 if (refcount_dec_and_test(&pid->count)) {
112 kmem_cache_free(ns->pid_cachep, pid);
113 put_pid_ns(ns);
114 }
115}
116EXPORT_SYMBOL_GPL(put_pid);
117
118static void delayed_put_pid(struct rcu_head *rhp)
119{
120 struct pid *pid = container_of(rhp, struct pid, rcu);
121 put_pid(pid);
122}
123
124void free_pid(struct pid *pid)
125{
126 /* We can be called with write_lock_irq(&tasklist_lock) held */
127 int i;
128 unsigned long flags;
129
130 spin_lock_irqsave(&pidmap_lock, flags);
131 for (i = 0; i <= pid->level; i++) {
132 struct upid *upid = pid->numbers + i;
133 struct pid_namespace *ns = upid->ns;
134 switch (--ns->pid_allocated) {
135 case 2:
136 case 1:
137 /* When all that is left in the pid namespace
138 * is the reaper wake up the reaper. The reaper
139 * may be sleeping in zap_pid_ns_processes().
140 */
141 wake_up_process(ns->child_reaper);
142 break;
143 case PIDNS_ADDING:
144 /* Handle a fork failure of the first process */
145 WARN_ON(ns->child_reaper);
146 ns->pid_allocated = 0;
147 /* fall through */
148 case 0:
149 schedule_work(&ns->proc_work);
150 break;
151 }
152
153 idr_remove(&ns->idr, upid->nr);
154 }
155 spin_unlock_irqrestore(&pidmap_lock, flags);
156
157 call_rcu(&pid->rcu, delayed_put_pid);
158}
159
160struct pid *alloc_pid(struct pid_namespace *ns)
161{
162 struct pid *pid;
163 enum pid_type type;
164 int i, nr;
165 struct pid_namespace *tmp;
166 struct upid *upid;
167 int retval = -ENOMEM;
168
169 pid = kmem_cache_alloc(ns->pid_cachep, GFP_KERNEL);
170 if (!pid)
171 return ERR_PTR(retval);
172
173 tmp = ns;
174 pid->level = ns->level;
175
176 for (i = ns->level; i >= 0; i--) {
177 int pid_min = 1;
178
179 idr_preload(GFP_KERNEL);
180 spin_lock_irq(&pidmap_lock);
181
182 /*
183 * init really needs pid 1, but after reaching the maximum
184 * wrap back to RESERVED_PIDS
185 */
186 if (idr_get_cursor(&tmp->idr) > RESERVED_PIDS)
187 pid_min = RESERVED_PIDS;
188
189 /*
190 * Store a null pointer so find_pid_ns does not find
191 * a partially initialized PID (see below).
192 */
193 nr = idr_alloc_cyclic(&tmp->idr, NULL, pid_min,
194 pid_max, GFP_ATOMIC);
195 spin_unlock_irq(&pidmap_lock);
196 idr_preload_end();
197
198 if (nr < 0) {
199 retval = (nr == -ENOSPC) ? -EAGAIN : nr;
200 goto out_free;
201 }
202
203 pid->numbers[i].nr = nr;
204 pid->numbers[i].ns = tmp;
205 tmp = tmp->parent;
206 }
207
208 if (unlikely(is_child_reaper(pid))) {
209 if (pid_ns_prepare_proc(ns))
210 goto out_free;
211 }
212
213 get_pid_ns(ns);
214 refcount_set(&pid->count, 1);
215 for (type = 0; type < PIDTYPE_MAX; ++type)
216 INIT_HLIST_HEAD(&pid->tasks[type]);
217
218 init_waitqueue_head(&pid->wait_pidfd);
219
220 upid = pid->numbers + ns->level;
221 spin_lock_irq(&pidmap_lock);
222 if (!(ns->pid_allocated & PIDNS_ADDING))
223 goto out_unlock;
224 for ( ; upid >= pid->numbers; --upid) {
225 /* Make the PID visible to find_pid_ns. */
226 idr_replace(&upid->ns->idr, pid, upid->nr);
227 upid->ns->pid_allocated++;
228 }
229 spin_unlock_irq(&pidmap_lock);
230
231 return pid;
232
233out_unlock:
234 spin_unlock_irq(&pidmap_lock);
235 put_pid_ns(ns);
236
237out_free:
238 spin_lock_irq(&pidmap_lock);
239 while (++i <= ns->level) {
240 upid = pid->numbers + i;
241 idr_remove(&upid->ns->idr, upid->nr);
242 }
243
244 /* On failure to allocate the first pid, reset the state */
245 if (ns->pid_allocated == PIDNS_ADDING)
246 idr_set_cursor(&ns->idr, 0);
247
248 spin_unlock_irq(&pidmap_lock);
249
250 kmem_cache_free(ns->pid_cachep, pid);
251 return ERR_PTR(retval);
252}
253
254void disable_pid_allocation(struct pid_namespace *ns)
255{
256 spin_lock_irq(&pidmap_lock);
257 ns->pid_allocated &= ~PIDNS_ADDING;
258 spin_unlock_irq(&pidmap_lock);
259}
260
261struct pid *find_pid_ns(int nr, struct pid_namespace *ns)
262{
263 return idr_find(&ns->idr, nr);
264}
265EXPORT_SYMBOL_GPL(find_pid_ns);
266
267struct pid *find_vpid(int nr)
268{
269 return find_pid_ns(nr, task_active_pid_ns(current));
270}
271EXPORT_SYMBOL_GPL(find_vpid);
272
273static struct pid **task_pid_ptr(struct task_struct *task, enum pid_type type)
274{
275 return (type == PIDTYPE_PID) ?
276 &task->thread_pid :
277 &task->signal->pids[type];
278}
279
280/*
281 * attach_pid() must be called with the tasklist_lock write-held.
282 */
283void attach_pid(struct task_struct *task, enum pid_type type)
284{
285 struct pid *pid = *task_pid_ptr(task, type);
286 hlist_add_head_rcu(&task->pid_links[type], &pid->tasks[type]);
287}
288
289static void __change_pid(struct task_struct *task, enum pid_type type,
290 struct pid *new)
291{
292 struct pid **pid_ptr = task_pid_ptr(task, type);
293 struct pid *pid;
294 int tmp;
295
296 pid = *pid_ptr;
297
298 hlist_del_rcu(&task->pid_links[type]);
299 *pid_ptr = new;
300
301 for (tmp = PIDTYPE_MAX; --tmp >= 0; )
302 if (!hlist_empty(&pid->tasks[tmp]))
303 return;
304
305 free_pid(pid);
306}
307
308void detach_pid(struct task_struct *task, enum pid_type type)
309{
310 __change_pid(task, type, NULL);
311}
312
313void change_pid(struct task_struct *task, enum pid_type type,
314 struct pid *pid)
315{
316 __change_pid(task, type, pid);
317 attach_pid(task, type);
318}
319
320/* transfer_pid is an optimization of attach_pid(new), detach_pid(old) */
321void transfer_pid(struct task_struct *old, struct task_struct *new,
322 enum pid_type type)
323{
324 if (type == PIDTYPE_PID)
325 new->thread_pid = old->thread_pid;
326 hlist_replace_rcu(&old->pid_links[type], &new->pid_links[type]);
327}
328
329struct task_struct *pid_task(struct pid *pid, enum pid_type type)
330{
331 struct task_struct *result = NULL;
332 if (pid) {
333 struct hlist_node *first;
334 first = rcu_dereference_check(hlist_first_rcu(&pid->tasks[type]),
335 lockdep_tasklist_lock_is_held());
336 if (first)
337 result = hlist_entry(first, struct task_struct, pid_links[(type)]);
338 }
339 return result;
340}
341EXPORT_SYMBOL(pid_task);
342
343/*
344 * Must be called under rcu_read_lock().
345 */
346struct task_struct *find_task_by_pid_ns(pid_t nr, struct pid_namespace *ns)
347{
348 RCU_LOCKDEP_WARN(!rcu_read_lock_held(),
349 "find_task_by_pid_ns() needs rcu_read_lock() protection");
350 return pid_task(find_pid_ns(nr, ns), PIDTYPE_PID);
351}
352
353struct task_struct *find_task_by_vpid(pid_t vnr)
354{
355 return find_task_by_pid_ns(vnr, task_active_pid_ns(current));
356}
357
358struct task_struct *find_get_task_by_vpid(pid_t nr)
359{
360 struct task_struct *task;
361
362 rcu_read_lock();
363 task = find_task_by_vpid(nr);
364 if (task)
365 get_task_struct(task);
366 rcu_read_unlock();
367
368 return task;
369}
370
371struct pid *get_task_pid(struct task_struct *task, enum pid_type type)
372{
373 struct pid *pid;
374 rcu_read_lock();
375 pid = get_pid(rcu_dereference(*task_pid_ptr(task, type)));
376 rcu_read_unlock();
377 return pid;
378}
379EXPORT_SYMBOL_GPL(get_task_pid);
380
381struct task_struct *get_pid_task(struct pid *pid, enum pid_type type)
382{
383 struct task_struct *result;
384 rcu_read_lock();
385 result = pid_task(pid, type);
386 if (result)
387 get_task_struct(result);
388 rcu_read_unlock();
389 return result;
390}
391EXPORT_SYMBOL_GPL(get_pid_task);
392
393struct pid *find_get_pid(pid_t nr)
394{
395 struct pid *pid;
396
397 rcu_read_lock();
398 pid = get_pid(find_vpid(nr));
399 rcu_read_unlock();
400
401 return pid;
402}
403EXPORT_SYMBOL_GPL(find_get_pid);
404
405pid_t pid_nr_ns(struct pid *pid, struct pid_namespace *ns)
406{
407 struct upid *upid;
408 pid_t nr = 0;
409
410 if (pid && ns->level <= pid->level) {
411 upid = &pid->numbers[ns->level];
412 if (upid->ns == ns)
413 nr = upid->nr;
414 }
415 return nr;
416}
417EXPORT_SYMBOL_GPL(pid_nr_ns);
418
419pid_t pid_vnr(struct pid *pid)
420{
421 return pid_nr_ns(pid, task_active_pid_ns(current));
422}
423EXPORT_SYMBOL_GPL(pid_vnr);
424
425pid_t __task_pid_nr_ns(struct task_struct *task, enum pid_type type,
426 struct pid_namespace *ns)
427{
428 pid_t nr = 0;
429
430 rcu_read_lock();
431 if (!ns)
432 ns = task_active_pid_ns(current);
433 if (likely(pid_alive(task)))
434 nr = pid_nr_ns(rcu_dereference(*task_pid_ptr(task, type)), ns);
435 rcu_read_unlock();
436
437 return nr;
438}
439EXPORT_SYMBOL(__task_pid_nr_ns);
440
441struct pid_namespace *task_active_pid_ns(struct task_struct *tsk)
442{
443 return ns_of_pid(task_pid(tsk));
444}
445EXPORT_SYMBOL_GPL(task_active_pid_ns);
446
447/*
448 * Used by proc to find the first pid that is greater than or equal to nr.
449 *
450 * If there is a pid at nr this function is exactly the same as find_pid_ns.
451 */
452struct pid *find_ge_pid(int nr, struct pid_namespace *ns)
453{
454 return idr_get_next(&ns->idr, &nr);
455}
456
457/**
458 * pidfd_create() - Create a new pid file descriptor.
459 *
460 * @pid: struct pid that the pidfd will reference
461 *
462 * This creates a new pid file descriptor with the O_CLOEXEC flag set.
463 *
464 * Note, that this function can only be called after the fd table has
465 * been unshared to avoid leaking the pidfd to the new process.
466 *
467 * Return: On success, a cloexec pidfd is returned.
468 * On error, a negative errno number will be returned.
469 */
470static int pidfd_create(struct pid *pid)
471{
472 int fd;
473
474 fd = anon_inode_getfd("[pidfd]", &pidfd_fops, get_pid(pid),
475 O_RDWR | O_CLOEXEC);
476 if (fd < 0)
477 put_pid(pid);
478
479 return fd;
480}
481
482/**
483 * pidfd_open() - Open new pid file descriptor.
484 *
485 * @pid: pid for which to retrieve a pidfd
486 * @flags: flags to pass
487 *
488 * This creates a new pid file descriptor with the O_CLOEXEC flag set for
489 * the process identified by @pid. Currently, the process identified by
490 * @pid must be a thread-group leader. This restriction currently exists
491 * for all aspects of pidfds including pidfd creation (CLONE_PIDFD cannot
492 * be used with CLONE_THREAD) and pidfd polling (only supports thread group
493 * leaders).
494 *
495 * Return: On success, a cloexec pidfd is returned.
496 * On error, a negative errno number will be returned.
497 */
498SYSCALL_DEFINE2(pidfd_open, pid_t, pid, unsigned int, flags)
499{
500 int fd, ret;
501 struct pid *p;
502
503 if (flags)
504 return -EINVAL;
505
506 if (pid <= 0)
507 return -EINVAL;
508
509 p = find_get_pid(pid);
510 if (!p)
511 return -ESRCH;
512
513 ret = 0;
514 rcu_read_lock();
515 if (!pid_task(p, PIDTYPE_TGID))
516 ret = -EINVAL;
517 rcu_read_unlock();
518
519 fd = ret ?: pidfd_create(p);
520 put_pid(p);
521 return fd;
522}
523
524void __init pid_idr_init(void)
525{
526 /* Verify no one has done anything silly: */
527 BUILD_BUG_ON(PID_MAX_LIMIT >= PIDNS_ADDING);
528
529 /* bump default and minimum pid_max based on number of cpus */
530 pid_max = min(pid_max_max, max_t(int, pid_max,
531 PIDS_PER_CPU_DEFAULT * num_possible_cpus()));
532 pid_max_min = max_t(int, pid_max_min,
533 PIDS_PER_CPU_MIN * num_possible_cpus());
534 pr_info("pid_max: default: %u minimum: %u\n", pid_max, pid_max_min);
535
536 idr_init(&init_pid_ns.idr);
537
538 init_pid_ns.pid_cachep = KMEM_CACHE(pid,
539 SLAB_HWCACHE_ALIGN | SLAB_PANIC | SLAB_ACCOUNT);
540}
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Generic pidhash and scalable, time-bounded PID allocator
4 *
5 * (C) 2002-2003 Nadia Yvette Chambers, IBM
6 * (C) 2004 Nadia Yvette Chambers, Oracle
7 * (C) 2002-2004 Ingo Molnar, Red Hat
8 *
9 * pid-structures are backing objects for tasks sharing a given ID to chain
10 * against. There is very little to them aside from hashing them and
11 * parking tasks using given ID's on a list.
12 *
13 * The hash is always changed with the tasklist_lock write-acquired,
14 * and the hash is only accessed with the tasklist_lock at least
15 * read-acquired, so there's no additional SMP locking needed here.
16 *
17 * We have a list of bitmap pages, which bitmaps represent the PID space.
18 * Allocating and freeing PIDs is completely lockless. The worst-case
19 * allocation scenario when all but one out of 1 million PIDs possible are
20 * allocated already: the scanning of 32 list entries and at most PAGE_SIZE
21 * bytes. The typical fastpath is a single successful setbit. Freeing is O(1).
22 *
23 * Pid namespaces:
24 * (C) 2007 Pavel Emelyanov <xemul@openvz.org>, OpenVZ, SWsoft Inc.
25 * (C) 2007 Sukadev Bhattiprolu <sukadev@us.ibm.com>, IBM
26 * Many thanks to Oleg Nesterov for comments and help
27 *
28 */
29
30#include <linux/mm.h>
31#include <linux/export.h>
32#include <linux/slab.h>
33#include <linux/init.h>
34#include <linux/rculist.h>
35#include <linux/memblock.h>
36#include <linux/pid_namespace.h>
37#include <linux/init_task.h>
38#include <linux/syscalls.h>
39#include <linux/proc_ns.h>
40#include <linux/refcount.h>
41#include <linux/anon_inodes.h>
42#include <linux/sched/signal.h>
43#include <linux/sched/task.h>
44#include <linux/idr.h>
45#include <net/sock.h>
46#include <uapi/linux/pidfd.h>
47
48struct pid init_struct_pid = {
49 .count = REFCOUNT_INIT(1),
50 .tasks = {
51 { .first = NULL },
52 { .first = NULL },
53 { .first = NULL },
54 },
55 .level = 0,
56 .numbers = { {
57 .nr = 0,
58 .ns = &init_pid_ns,
59 }, }
60};
61
62int pid_max = PID_MAX_DEFAULT;
63
64#define RESERVED_PIDS 300
65
66int pid_max_min = RESERVED_PIDS + 1;
67int pid_max_max = PID_MAX_LIMIT;
68
69/*
70 * PID-map pages start out as NULL, they get allocated upon
71 * first use and are never deallocated. This way a low pid_max
72 * value does not cause lots of bitmaps to be allocated, but
73 * the scheme scales to up to 4 million PIDs, runtime.
74 */
75struct pid_namespace init_pid_ns = {
76 .ns.count = REFCOUNT_INIT(2),
77 .idr = IDR_INIT(init_pid_ns.idr),
78 .pid_allocated = PIDNS_ADDING,
79 .level = 0,
80 .child_reaper = &init_task,
81 .user_ns = &init_user_ns,
82 .ns.inum = PROC_PID_INIT_INO,
83#ifdef CONFIG_PID_NS
84 .ns.ops = &pidns_operations,
85#endif
86};
87EXPORT_SYMBOL_GPL(init_pid_ns);
88
89/*
90 * Note: disable interrupts while the pidmap_lock is held as an
91 * interrupt might come in and do read_lock(&tasklist_lock).
92 *
93 * If we don't disable interrupts there is a nasty deadlock between
94 * detach_pid()->free_pid() and another cpu that does
95 * spin_lock(&pidmap_lock) followed by an interrupt routine that does
96 * read_lock(&tasklist_lock);
97 *
98 * After we clean up the tasklist_lock and know there are no
99 * irq handlers that take it we can leave the interrupts enabled.
100 * For now it is easier to be safe than to prove it can't happen.
101 */
102
103static __cacheline_aligned_in_smp DEFINE_SPINLOCK(pidmap_lock);
104
105void put_pid(struct pid *pid)
106{
107 struct pid_namespace *ns;
108
109 if (!pid)
110 return;
111
112 ns = pid->numbers[pid->level].ns;
113 if (refcount_dec_and_test(&pid->count)) {
114 kmem_cache_free(ns->pid_cachep, pid);
115 put_pid_ns(ns);
116 }
117}
118EXPORT_SYMBOL_GPL(put_pid);
119
120static void delayed_put_pid(struct rcu_head *rhp)
121{
122 struct pid *pid = container_of(rhp, struct pid, rcu);
123 put_pid(pid);
124}
125
126void free_pid(struct pid *pid)
127{
128 /* We can be called with write_lock_irq(&tasklist_lock) held */
129 int i;
130 unsigned long flags;
131
132 spin_lock_irqsave(&pidmap_lock, flags);
133 for (i = 0; i <= pid->level; i++) {
134 struct upid *upid = pid->numbers + i;
135 struct pid_namespace *ns = upid->ns;
136 switch (--ns->pid_allocated) {
137 case 2:
138 case 1:
139 /* When all that is left in the pid namespace
140 * is the reaper wake up the reaper. The reaper
141 * may be sleeping in zap_pid_ns_processes().
142 */
143 wake_up_process(ns->child_reaper);
144 break;
145 case PIDNS_ADDING:
146 /* Handle a fork failure of the first process */
147 WARN_ON(ns->child_reaper);
148 ns->pid_allocated = 0;
149 break;
150 }
151
152 idr_remove(&ns->idr, upid->nr);
153 }
154 spin_unlock_irqrestore(&pidmap_lock, flags);
155
156 call_rcu(&pid->rcu, delayed_put_pid);
157}
158
159struct pid *alloc_pid(struct pid_namespace *ns, pid_t *set_tid,
160 size_t set_tid_size)
161{
162 struct pid *pid;
163 enum pid_type type;
164 int i, nr;
165 struct pid_namespace *tmp;
166 struct upid *upid;
167 int retval = -ENOMEM;
168
169 /*
170 * set_tid_size contains the size of the set_tid array. Starting at
171 * the most nested currently active PID namespace it tells alloc_pid()
172 * which PID to set for a process in that most nested PID namespace
173 * up to set_tid_size PID namespaces. It does not have to set the PID
174 * for a process in all nested PID namespaces but set_tid_size must
175 * never be greater than the current ns->level + 1.
176 */
177 if (set_tid_size > ns->level + 1)
178 return ERR_PTR(-EINVAL);
179
180 pid = kmem_cache_alloc(ns->pid_cachep, GFP_KERNEL);
181 if (!pid)
182 return ERR_PTR(retval);
183
184 tmp = ns;
185 pid->level = ns->level;
186
187 for (i = ns->level; i >= 0; i--) {
188 int tid = 0;
189
190 if (set_tid_size) {
191 tid = set_tid[ns->level - i];
192
193 retval = -EINVAL;
194 if (tid < 1 || tid >= pid_max)
195 goto out_free;
196 /*
197 * Also fail if a PID != 1 is requested and
198 * no PID 1 exists.
199 */
200 if (tid != 1 && !tmp->child_reaper)
201 goto out_free;
202 retval = -EPERM;
203 if (!checkpoint_restore_ns_capable(tmp->user_ns))
204 goto out_free;
205 set_tid_size--;
206 }
207
208 idr_preload(GFP_KERNEL);
209 spin_lock_irq(&pidmap_lock);
210
211 if (tid) {
212 nr = idr_alloc(&tmp->idr, NULL, tid,
213 tid + 1, GFP_ATOMIC);
214 /*
215 * If ENOSPC is returned it means that the PID is
216 * alreay in use. Return EEXIST in that case.
217 */
218 if (nr == -ENOSPC)
219 nr = -EEXIST;
220 } else {
221 int pid_min = 1;
222 /*
223 * init really needs pid 1, but after reaching the
224 * maximum wrap back to RESERVED_PIDS
225 */
226 if (idr_get_cursor(&tmp->idr) > RESERVED_PIDS)
227 pid_min = RESERVED_PIDS;
228
229 /*
230 * Store a null pointer so find_pid_ns does not find
231 * a partially initialized PID (see below).
232 */
233 nr = idr_alloc_cyclic(&tmp->idr, NULL, pid_min,
234 pid_max, GFP_ATOMIC);
235 }
236 spin_unlock_irq(&pidmap_lock);
237 idr_preload_end();
238
239 if (nr < 0) {
240 retval = (nr == -ENOSPC) ? -EAGAIN : nr;
241 goto out_free;
242 }
243
244 pid->numbers[i].nr = nr;
245 pid->numbers[i].ns = tmp;
246 tmp = tmp->parent;
247 }
248
249 /*
250 * ENOMEM is not the most obvious choice especially for the case
251 * where the child subreaper has already exited and the pid
252 * namespace denies the creation of any new processes. But ENOMEM
253 * is what we have exposed to userspace for a long time and it is
254 * documented behavior for pid namespaces. So we can't easily
255 * change it even if there were an error code better suited.
256 */
257 retval = -ENOMEM;
258
259 get_pid_ns(ns);
260 refcount_set(&pid->count, 1);
261 spin_lock_init(&pid->lock);
262 for (type = 0; type < PIDTYPE_MAX; ++type)
263 INIT_HLIST_HEAD(&pid->tasks[type]);
264
265 init_waitqueue_head(&pid->wait_pidfd);
266 INIT_HLIST_HEAD(&pid->inodes);
267
268 upid = pid->numbers + ns->level;
269 spin_lock_irq(&pidmap_lock);
270 if (!(ns->pid_allocated & PIDNS_ADDING))
271 goto out_unlock;
272 for ( ; upid >= pid->numbers; --upid) {
273 /* Make the PID visible to find_pid_ns. */
274 idr_replace(&upid->ns->idr, pid, upid->nr);
275 upid->ns->pid_allocated++;
276 }
277 spin_unlock_irq(&pidmap_lock);
278
279 return pid;
280
281out_unlock:
282 spin_unlock_irq(&pidmap_lock);
283 put_pid_ns(ns);
284
285out_free:
286 spin_lock_irq(&pidmap_lock);
287 while (++i <= ns->level) {
288 upid = pid->numbers + i;
289 idr_remove(&upid->ns->idr, upid->nr);
290 }
291
292 /* On failure to allocate the first pid, reset the state */
293 if (ns->pid_allocated == PIDNS_ADDING)
294 idr_set_cursor(&ns->idr, 0);
295
296 spin_unlock_irq(&pidmap_lock);
297
298 kmem_cache_free(ns->pid_cachep, pid);
299 return ERR_PTR(retval);
300}
301
302void disable_pid_allocation(struct pid_namespace *ns)
303{
304 spin_lock_irq(&pidmap_lock);
305 ns->pid_allocated &= ~PIDNS_ADDING;
306 spin_unlock_irq(&pidmap_lock);
307}
308
309struct pid *find_pid_ns(int nr, struct pid_namespace *ns)
310{
311 return idr_find(&ns->idr, nr);
312}
313EXPORT_SYMBOL_GPL(find_pid_ns);
314
315struct pid *find_vpid(int nr)
316{
317 return find_pid_ns(nr, task_active_pid_ns(current));
318}
319EXPORT_SYMBOL_GPL(find_vpid);
320
321static struct pid **task_pid_ptr(struct task_struct *task, enum pid_type type)
322{
323 return (type == PIDTYPE_PID) ?
324 &task->thread_pid :
325 &task->signal->pids[type];
326}
327
328/*
329 * attach_pid() must be called with the tasklist_lock write-held.
330 */
331void attach_pid(struct task_struct *task, enum pid_type type)
332{
333 struct pid *pid = *task_pid_ptr(task, type);
334 hlist_add_head_rcu(&task->pid_links[type], &pid->tasks[type]);
335}
336
337static void __change_pid(struct task_struct *task, enum pid_type type,
338 struct pid *new)
339{
340 struct pid **pid_ptr = task_pid_ptr(task, type);
341 struct pid *pid;
342 int tmp;
343
344 pid = *pid_ptr;
345
346 hlist_del_rcu(&task->pid_links[type]);
347 *pid_ptr = new;
348
349 for (tmp = PIDTYPE_MAX; --tmp >= 0; )
350 if (pid_has_task(pid, tmp))
351 return;
352
353 free_pid(pid);
354}
355
356void detach_pid(struct task_struct *task, enum pid_type type)
357{
358 __change_pid(task, type, NULL);
359}
360
361void change_pid(struct task_struct *task, enum pid_type type,
362 struct pid *pid)
363{
364 __change_pid(task, type, pid);
365 attach_pid(task, type);
366}
367
368void exchange_tids(struct task_struct *left, struct task_struct *right)
369{
370 struct pid *pid1 = left->thread_pid;
371 struct pid *pid2 = right->thread_pid;
372 struct hlist_head *head1 = &pid1->tasks[PIDTYPE_PID];
373 struct hlist_head *head2 = &pid2->tasks[PIDTYPE_PID];
374
375 /* Swap the single entry tid lists */
376 hlists_swap_heads_rcu(head1, head2);
377
378 /* Swap the per task_struct pid */
379 rcu_assign_pointer(left->thread_pid, pid2);
380 rcu_assign_pointer(right->thread_pid, pid1);
381
382 /* Swap the cached value */
383 WRITE_ONCE(left->pid, pid_nr(pid2));
384 WRITE_ONCE(right->pid, pid_nr(pid1));
385}
386
387/* transfer_pid is an optimization of attach_pid(new), detach_pid(old) */
388void transfer_pid(struct task_struct *old, struct task_struct *new,
389 enum pid_type type)
390{
391 if (type == PIDTYPE_PID)
392 new->thread_pid = old->thread_pid;
393 hlist_replace_rcu(&old->pid_links[type], &new->pid_links[type]);
394}
395
396struct task_struct *pid_task(struct pid *pid, enum pid_type type)
397{
398 struct task_struct *result = NULL;
399 if (pid) {
400 struct hlist_node *first;
401 first = rcu_dereference_check(hlist_first_rcu(&pid->tasks[type]),
402 lockdep_tasklist_lock_is_held());
403 if (first)
404 result = hlist_entry(first, struct task_struct, pid_links[(type)]);
405 }
406 return result;
407}
408EXPORT_SYMBOL(pid_task);
409
410/*
411 * Must be called under rcu_read_lock().
412 */
413struct task_struct *find_task_by_pid_ns(pid_t nr, struct pid_namespace *ns)
414{
415 RCU_LOCKDEP_WARN(!rcu_read_lock_held(),
416 "find_task_by_pid_ns() needs rcu_read_lock() protection");
417 return pid_task(find_pid_ns(nr, ns), PIDTYPE_PID);
418}
419
420struct task_struct *find_task_by_vpid(pid_t vnr)
421{
422 return find_task_by_pid_ns(vnr, task_active_pid_ns(current));
423}
424
425struct task_struct *find_get_task_by_vpid(pid_t nr)
426{
427 struct task_struct *task;
428
429 rcu_read_lock();
430 task = find_task_by_vpid(nr);
431 if (task)
432 get_task_struct(task);
433 rcu_read_unlock();
434
435 return task;
436}
437
438struct pid *get_task_pid(struct task_struct *task, enum pid_type type)
439{
440 struct pid *pid;
441 rcu_read_lock();
442 pid = get_pid(rcu_dereference(*task_pid_ptr(task, type)));
443 rcu_read_unlock();
444 return pid;
445}
446EXPORT_SYMBOL_GPL(get_task_pid);
447
448struct task_struct *get_pid_task(struct pid *pid, enum pid_type type)
449{
450 struct task_struct *result;
451 rcu_read_lock();
452 result = pid_task(pid, type);
453 if (result)
454 get_task_struct(result);
455 rcu_read_unlock();
456 return result;
457}
458EXPORT_SYMBOL_GPL(get_pid_task);
459
460struct pid *find_get_pid(pid_t nr)
461{
462 struct pid *pid;
463
464 rcu_read_lock();
465 pid = get_pid(find_vpid(nr));
466 rcu_read_unlock();
467
468 return pid;
469}
470EXPORT_SYMBOL_GPL(find_get_pid);
471
472pid_t pid_nr_ns(struct pid *pid, struct pid_namespace *ns)
473{
474 struct upid *upid;
475 pid_t nr = 0;
476
477 if (pid && ns->level <= pid->level) {
478 upid = &pid->numbers[ns->level];
479 if (upid->ns == ns)
480 nr = upid->nr;
481 }
482 return nr;
483}
484EXPORT_SYMBOL_GPL(pid_nr_ns);
485
486pid_t pid_vnr(struct pid *pid)
487{
488 return pid_nr_ns(pid, task_active_pid_ns(current));
489}
490EXPORT_SYMBOL_GPL(pid_vnr);
491
492pid_t __task_pid_nr_ns(struct task_struct *task, enum pid_type type,
493 struct pid_namespace *ns)
494{
495 pid_t nr = 0;
496
497 rcu_read_lock();
498 if (!ns)
499 ns = task_active_pid_ns(current);
500 nr = pid_nr_ns(rcu_dereference(*task_pid_ptr(task, type)), ns);
501 rcu_read_unlock();
502
503 return nr;
504}
505EXPORT_SYMBOL(__task_pid_nr_ns);
506
507struct pid_namespace *task_active_pid_ns(struct task_struct *tsk)
508{
509 return ns_of_pid(task_pid(tsk));
510}
511EXPORT_SYMBOL_GPL(task_active_pid_ns);
512
513/*
514 * Used by proc to find the first pid that is greater than or equal to nr.
515 *
516 * If there is a pid at nr this function is exactly the same as find_pid_ns.
517 */
518struct pid *find_ge_pid(int nr, struct pid_namespace *ns)
519{
520 return idr_get_next(&ns->idr, &nr);
521}
522EXPORT_SYMBOL_GPL(find_ge_pid);
523
524struct pid *pidfd_get_pid(unsigned int fd, unsigned int *flags)
525{
526 struct fd f;
527 struct pid *pid;
528
529 f = fdget(fd);
530 if (!f.file)
531 return ERR_PTR(-EBADF);
532
533 pid = pidfd_pid(f.file);
534 if (!IS_ERR(pid)) {
535 get_pid(pid);
536 *flags = f.file->f_flags;
537 }
538
539 fdput(f);
540 return pid;
541}
542
543/**
544 * pidfd_get_task() - Get the task associated with a pidfd
545 *
546 * @pidfd: pidfd for which to get the task
547 * @flags: flags associated with this pidfd
548 *
549 * Return the task associated with @pidfd. The function takes a reference on
550 * the returned task. The caller is responsible for releasing that reference.
551 *
552 * Currently, the process identified by @pidfd is always a thread-group leader.
553 * This restriction currently exists for all aspects of pidfds including pidfd
554 * creation (CLONE_PIDFD cannot be used with CLONE_THREAD) and pidfd polling
555 * (only supports thread group leaders).
556 *
557 * Return: On success, the task_struct associated with the pidfd.
558 * On error, a negative errno number will be returned.
559 */
560struct task_struct *pidfd_get_task(int pidfd, unsigned int *flags)
561{
562 unsigned int f_flags;
563 struct pid *pid;
564 struct task_struct *task;
565
566 pid = pidfd_get_pid(pidfd, &f_flags);
567 if (IS_ERR(pid))
568 return ERR_CAST(pid);
569
570 task = get_pid_task(pid, PIDTYPE_TGID);
571 put_pid(pid);
572 if (!task)
573 return ERR_PTR(-ESRCH);
574
575 *flags = f_flags;
576 return task;
577}
578
579/**
580 * pidfd_create() - Create a new pid file descriptor.
581 *
582 * @pid: struct pid that the pidfd will reference
583 * @flags: flags to pass
584 *
585 * This creates a new pid file descriptor with the O_CLOEXEC flag set.
586 *
587 * Note, that this function can only be called after the fd table has
588 * been unshared to avoid leaking the pidfd to the new process.
589 *
590 * This symbol should not be explicitly exported to loadable modules.
591 *
592 * Return: On success, a cloexec pidfd is returned.
593 * On error, a negative errno number will be returned.
594 */
595int pidfd_create(struct pid *pid, unsigned int flags)
596{
597 int fd;
598
599 if (!pid || !pid_has_task(pid, PIDTYPE_TGID))
600 return -EINVAL;
601
602 if (flags & ~(O_NONBLOCK | O_RDWR | O_CLOEXEC))
603 return -EINVAL;
604
605 fd = anon_inode_getfd("[pidfd]", &pidfd_fops, get_pid(pid),
606 flags | O_RDWR | O_CLOEXEC);
607 if (fd < 0)
608 put_pid(pid);
609
610 return fd;
611}
612
613/**
614 * pidfd_open() - Open new pid file descriptor.
615 *
616 * @pid: pid for which to retrieve a pidfd
617 * @flags: flags to pass
618 *
619 * This creates a new pid file descriptor with the O_CLOEXEC flag set for
620 * the process identified by @pid. Currently, the process identified by
621 * @pid must be a thread-group leader. This restriction currently exists
622 * for all aspects of pidfds including pidfd creation (CLONE_PIDFD cannot
623 * be used with CLONE_THREAD) and pidfd polling (only supports thread group
624 * leaders).
625 *
626 * Return: On success, a cloexec pidfd is returned.
627 * On error, a negative errno number will be returned.
628 */
629SYSCALL_DEFINE2(pidfd_open, pid_t, pid, unsigned int, flags)
630{
631 int fd;
632 struct pid *p;
633
634 if (flags & ~PIDFD_NONBLOCK)
635 return -EINVAL;
636
637 if (pid <= 0)
638 return -EINVAL;
639
640 p = find_get_pid(pid);
641 if (!p)
642 return -ESRCH;
643
644 fd = pidfd_create(p, flags);
645
646 put_pid(p);
647 return fd;
648}
649
650void __init pid_idr_init(void)
651{
652 /* Verify no one has done anything silly: */
653 BUILD_BUG_ON(PID_MAX_LIMIT >= PIDNS_ADDING);
654
655 /* bump default and minimum pid_max based on number of cpus */
656 pid_max = min(pid_max_max, max_t(int, pid_max,
657 PIDS_PER_CPU_DEFAULT * num_possible_cpus()));
658 pid_max_min = max_t(int, pid_max_min,
659 PIDS_PER_CPU_MIN * num_possible_cpus());
660 pr_info("pid_max: default: %u minimum: %u\n", pid_max, pid_max_min);
661
662 idr_init(&init_pid_ns.idr);
663
664 init_pid_ns.pid_cachep = KMEM_CACHE(pid,
665 SLAB_HWCACHE_ALIGN | SLAB_PANIC | SLAB_ACCOUNT);
666}
667
668static struct file *__pidfd_fget(struct task_struct *task, int fd)
669{
670 struct file *file;
671 int ret;
672
673 ret = down_read_killable(&task->signal->exec_update_lock);
674 if (ret)
675 return ERR_PTR(ret);
676
677 if (ptrace_may_access(task, PTRACE_MODE_ATTACH_REALCREDS))
678 file = fget_task(task, fd);
679 else
680 file = ERR_PTR(-EPERM);
681
682 up_read(&task->signal->exec_update_lock);
683
684 return file ?: ERR_PTR(-EBADF);
685}
686
687static int pidfd_getfd(struct pid *pid, int fd)
688{
689 struct task_struct *task;
690 struct file *file;
691 int ret;
692
693 task = get_pid_task(pid, PIDTYPE_PID);
694 if (!task)
695 return -ESRCH;
696
697 file = __pidfd_fget(task, fd);
698 put_task_struct(task);
699 if (IS_ERR(file))
700 return PTR_ERR(file);
701
702 ret = receive_fd(file, O_CLOEXEC);
703 fput(file);
704
705 return ret;
706}
707
708/**
709 * sys_pidfd_getfd() - Get a file descriptor from another process
710 *
711 * @pidfd: the pidfd file descriptor of the process
712 * @fd: the file descriptor number to get
713 * @flags: flags on how to get the fd (reserved)
714 *
715 * This syscall gets a copy of a file descriptor from another process
716 * based on the pidfd, and file descriptor number. It requires that
717 * the calling process has the ability to ptrace the process represented
718 * by the pidfd. The process which is having its file descriptor copied
719 * is otherwise unaffected.
720 *
721 * Return: On success, a cloexec file descriptor is returned.
722 * On error, a negative errno number will be returned.
723 */
724SYSCALL_DEFINE3(pidfd_getfd, int, pidfd, int, fd,
725 unsigned int, flags)
726{
727 struct pid *pid;
728 struct fd f;
729 int ret;
730
731 /* flags is currently unused - make sure it's unset */
732 if (flags)
733 return -EINVAL;
734
735 f = fdget(pidfd);
736 if (!f.file)
737 return -EBADF;
738
739 pid = pidfd_pid(f.file);
740 if (IS_ERR(pid))
741 ret = PTR_ERR(pid);
742 else
743 ret = pidfd_getfd(pid, fd);
744
745 fdput(f);
746 return ret;
747}