Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * PCI detection and setup code
4 */
5
6#include <linux/kernel.h>
7#include <linux/delay.h>
8#include <linux/init.h>
9#include <linux/pci.h>
10#include <linux/of_device.h>
11#include <linux/of_pci.h>
12#include <linux/pci_hotplug.h>
13#include <linux/slab.h>
14#include <linux/module.h>
15#include <linux/cpumask.h>
16#include <linux/aer.h>
17#include <linux/acpi.h>
18#include <linux/hypervisor.h>
19#include <linux/irqdomain.h>
20#include <linux/pm_runtime.h>
21#include "pci.h"
22
23#define CARDBUS_LATENCY_TIMER 176 /* secondary latency timer */
24#define CARDBUS_RESERVE_BUSNR 3
25
26static struct resource busn_resource = {
27 .name = "PCI busn",
28 .start = 0,
29 .end = 255,
30 .flags = IORESOURCE_BUS,
31};
32
33/* Ugh. Need to stop exporting this to modules. */
34LIST_HEAD(pci_root_buses);
35EXPORT_SYMBOL(pci_root_buses);
36
37static LIST_HEAD(pci_domain_busn_res_list);
38
39struct pci_domain_busn_res {
40 struct list_head list;
41 struct resource res;
42 int domain_nr;
43};
44
45static struct resource *get_pci_domain_busn_res(int domain_nr)
46{
47 struct pci_domain_busn_res *r;
48
49 list_for_each_entry(r, &pci_domain_busn_res_list, list)
50 if (r->domain_nr == domain_nr)
51 return &r->res;
52
53 r = kzalloc(sizeof(*r), GFP_KERNEL);
54 if (!r)
55 return NULL;
56
57 r->domain_nr = domain_nr;
58 r->res.start = 0;
59 r->res.end = 0xff;
60 r->res.flags = IORESOURCE_BUS | IORESOURCE_PCI_FIXED;
61
62 list_add_tail(&r->list, &pci_domain_busn_res_list);
63
64 return &r->res;
65}
66
67/*
68 * Some device drivers need know if PCI is initiated.
69 * Basically, we think PCI is not initiated when there
70 * is no device to be found on the pci_bus_type.
71 */
72int no_pci_devices(void)
73{
74 struct device *dev;
75 int no_devices;
76
77 dev = bus_find_next_device(&pci_bus_type, NULL);
78 no_devices = (dev == NULL);
79 put_device(dev);
80 return no_devices;
81}
82EXPORT_SYMBOL(no_pci_devices);
83
84/*
85 * PCI Bus Class
86 */
87static void release_pcibus_dev(struct device *dev)
88{
89 struct pci_bus *pci_bus = to_pci_bus(dev);
90
91 put_device(pci_bus->bridge);
92 pci_bus_remove_resources(pci_bus);
93 pci_release_bus_of_node(pci_bus);
94 kfree(pci_bus);
95}
96
97static struct class pcibus_class = {
98 .name = "pci_bus",
99 .dev_release = &release_pcibus_dev,
100 .dev_groups = pcibus_groups,
101};
102
103static int __init pcibus_class_init(void)
104{
105 return class_register(&pcibus_class);
106}
107postcore_initcall(pcibus_class_init);
108
109static u64 pci_size(u64 base, u64 maxbase, u64 mask)
110{
111 u64 size = mask & maxbase; /* Find the significant bits */
112 if (!size)
113 return 0;
114
115 /*
116 * Get the lowest of them to find the decode size, and from that
117 * the extent.
118 */
119 size = size & ~(size-1);
120
121 /*
122 * base == maxbase can be valid only if the BAR has already been
123 * programmed with all 1s.
124 */
125 if (base == maxbase && ((base | (size - 1)) & mask) != mask)
126 return 0;
127
128 return size;
129}
130
131static inline unsigned long decode_bar(struct pci_dev *dev, u32 bar)
132{
133 u32 mem_type;
134 unsigned long flags;
135
136 if ((bar & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_IO) {
137 flags = bar & ~PCI_BASE_ADDRESS_IO_MASK;
138 flags |= IORESOURCE_IO;
139 return flags;
140 }
141
142 flags = bar & ~PCI_BASE_ADDRESS_MEM_MASK;
143 flags |= IORESOURCE_MEM;
144 if (flags & PCI_BASE_ADDRESS_MEM_PREFETCH)
145 flags |= IORESOURCE_PREFETCH;
146
147 mem_type = bar & PCI_BASE_ADDRESS_MEM_TYPE_MASK;
148 switch (mem_type) {
149 case PCI_BASE_ADDRESS_MEM_TYPE_32:
150 break;
151 case PCI_BASE_ADDRESS_MEM_TYPE_1M:
152 /* 1M mem BAR treated as 32-bit BAR */
153 break;
154 case PCI_BASE_ADDRESS_MEM_TYPE_64:
155 flags |= IORESOURCE_MEM_64;
156 break;
157 default:
158 /* mem unknown type treated as 32-bit BAR */
159 break;
160 }
161 return flags;
162}
163
164#define PCI_COMMAND_DECODE_ENABLE (PCI_COMMAND_MEMORY | PCI_COMMAND_IO)
165
166/**
167 * pci_read_base - Read a PCI BAR
168 * @dev: the PCI device
169 * @type: type of the BAR
170 * @res: resource buffer to be filled in
171 * @pos: BAR position in the config space
172 *
173 * Returns 1 if the BAR is 64-bit, or 0 if 32-bit.
174 */
175int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
176 struct resource *res, unsigned int pos)
177{
178 u32 l = 0, sz = 0, mask;
179 u64 l64, sz64, mask64;
180 u16 orig_cmd;
181 struct pci_bus_region region, inverted_region;
182
183 mask = type ? PCI_ROM_ADDRESS_MASK : ~0;
184
185 /* No printks while decoding is disabled! */
186 if (!dev->mmio_always_on) {
187 pci_read_config_word(dev, PCI_COMMAND, &orig_cmd);
188 if (orig_cmd & PCI_COMMAND_DECODE_ENABLE) {
189 pci_write_config_word(dev, PCI_COMMAND,
190 orig_cmd & ~PCI_COMMAND_DECODE_ENABLE);
191 }
192 }
193
194 res->name = pci_name(dev);
195
196 pci_read_config_dword(dev, pos, &l);
197 pci_write_config_dword(dev, pos, l | mask);
198 pci_read_config_dword(dev, pos, &sz);
199 pci_write_config_dword(dev, pos, l);
200
201 /*
202 * All bits set in sz means the device isn't working properly.
203 * If the BAR isn't implemented, all bits must be 0. If it's a
204 * memory BAR or a ROM, bit 0 must be clear; if it's an io BAR, bit
205 * 1 must be clear.
206 */
207 if (sz == 0xffffffff)
208 sz = 0;
209
210 /*
211 * I don't know how l can have all bits set. Copied from old code.
212 * Maybe it fixes a bug on some ancient platform.
213 */
214 if (l == 0xffffffff)
215 l = 0;
216
217 if (type == pci_bar_unknown) {
218 res->flags = decode_bar(dev, l);
219 res->flags |= IORESOURCE_SIZEALIGN;
220 if (res->flags & IORESOURCE_IO) {
221 l64 = l & PCI_BASE_ADDRESS_IO_MASK;
222 sz64 = sz & PCI_BASE_ADDRESS_IO_MASK;
223 mask64 = PCI_BASE_ADDRESS_IO_MASK & (u32)IO_SPACE_LIMIT;
224 } else {
225 l64 = l & PCI_BASE_ADDRESS_MEM_MASK;
226 sz64 = sz & PCI_BASE_ADDRESS_MEM_MASK;
227 mask64 = (u32)PCI_BASE_ADDRESS_MEM_MASK;
228 }
229 } else {
230 if (l & PCI_ROM_ADDRESS_ENABLE)
231 res->flags |= IORESOURCE_ROM_ENABLE;
232 l64 = l & PCI_ROM_ADDRESS_MASK;
233 sz64 = sz & PCI_ROM_ADDRESS_MASK;
234 mask64 = PCI_ROM_ADDRESS_MASK;
235 }
236
237 if (res->flags & IORESOURCE_MEM_64) {
238 pci_read_config_dword(dev, pos + 4, &l);
239 pci_write_config_dword(dev, pos + 4, ~0);
240 pci_read_config_dword(dev, pos + 4, &sz);
241 pci_write_config_dword(dev, pos + 4, l);
242
243 l64 |= ((u64)l << 32);
244 sz64 |= ((u64)sz << 32);
245 mask64 |= ((u64)~0 << 32);
246 }
247
248 if (!dev->mmio_always_on && (orig_cmd & PCI_COMMAND_DECODE_ENABLE))
249 pci_write_config_word(dev, PCI_COMMAND, orig_cmd);
250
251 if (!sz64)
252 goto fail;
253
254 sz64 = pci_size(l64, sz64, mask64);
255 if (!sz64) {
256 pci_info(dev, FW_BUG "reg 0x%x: invalid BAR (can't size)\n",
257 pos);
258 goto fail;
259 }
260
261 if (res->flags & IORESOURCE_MEM_64) {
262 if ((sizeof(pci_bus_addr_t) < 8 || sizeof(resource_size_t) < 8)
263 && sz64 > 0x100000000ULL) {
264 res->flags |= IORESOURCE_UNSET | IORESOURCE_DISABLED;
265 res->start = 0;
266 res->end = 0;
267 pci_err(dev, "reg 0x%x: can't handle BAR larger than 4GB (size %#010llx)\n",
268 pos, (unsigned long long)sz64);
269 goto out;
270 }
271
272 if ((sizeof(pci_bus_addr_t) < 8) && l) {
273 /* Above 32-bit boundary; try to reallocate */
274 res->flags |= IORESOURCE_UNSET;
275 res->start = 0;
276 res->end = sz64 - 1;
277 pci_info(dev, "reg 0x%x: can't handle BAR above 4GB (bus address %#010llx)\n",
278 pos, (unsigned long long)l64);
279 goto out;
280 }
281 }
282
283 region.start = l64;
284 region.end = l64 + sz64 - 1;
285
286 pcibios_bus_to_resource(dev->bus, res, ®ion);
287 pcibios_resource_to_bus(dev->bus, &inverted_region, res);
288
289 /*
290 * If "A" is a BAR value (a bus address), "bus_to_resource(A)" is
291 * the corresponding resource address (the physical address used by
292 * the CPU. Converting that resource address back to a bus address
293 * should yield the original BAR value:
294 *
295 * resource_to_bus(bus_to_resource(A)) == A
296 *
297 * If it doesn't, CPU accesses to "bus_to_resource(A)" will not
298 * be claimed by the device.
299 */
300 if (inverted_region.start != region.start) {
301 res->flags |= IORESOURCE_UNSET;
302 res->start = 0;
303 res->end = region.end - region.start;
304 pci_info(dev, "reg 0x%x: initial BAR value %#010llx invalid\n",
305 pos, (unsigned long long)region.start);
306 }
307
308 goto out;
309
310
311fail:
312 res->flags = 0;
313out:
314 if (res->flags)
315 pci_info(dev, "reg 0x%x: %pR\n", pos, res);
316
317 return (res->flags & IORESOURCE_MEM_64) ? 1 : 0;
318}
319
320static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom)
321{
322 unsigned int pos, reg;
323
324 if (dev->non_compliant_bars)
325 return;
326
327 /* Per PCIe r4.0, sec 9.3.4.1.11, the VF BARs are all RO Zero */
328 if (dev->is_virtfn)
329 return;
330
331 for (pos = 0; pos < howmany; pos++) {
332 struct resource *res = &dev->resource[pos];
333 reg = PCI_BASE_ADDRESS_0 + (pos << 2);
334 pos += __pci_read_base(dev, pci_bar_unknown, res, reg);
335 }
336
337 if (rom) {
338 struct resource *res = &dev->resource[PCI_ROM_RESOURCE];
339 dev->rom_base_reg = rom;
340 res->flags = IORESOURCE_MEM | IORESOURCE_PREFETCH |
341 IORESOURCE_READONLY | IORESOURCE_SIZEALIGN;
342 __pci_read_base(dev, pci_bar_mem32, res, rom);
343 }
344}
345
346static void pci_read_bridge_windows(struct pci_dev *bridge)
347{
348 u16 io;
349 u32 pmem, tmp;
350
351 pci_read_config_word(bridge, PCI_IO_BASE, &io);
352 if (!io) {
353 pci_write_config_word(bridge, PCI_IO_BASE, 0xe0f0);
354 pci_read_config_word(bridge, PCI_IO_BASE, &io);
355 pci_write_config_word(bridge, PCI_IO_BASE, 0x0);
356 }
357 if (io)
358 bridge->io_window = 1;
359
360 /*
361 * DECchip 21050 pass 2 errata: the bridge may miss an address
362 * disconnect boundary by one PCI data phase. Workaround: do not
363 * use prefetching on this device.
364 */
365 if (bridge->vendor == PCI_VENDOR_ID_DEC && bridge->device == 0x0001)
366 return;
367
368 pci_read_config_dword(bridge, PCI_PREF_MEMORY_BASE, &pmem);
369 if (!pmem) {
370 pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE,
371 0xffe0fff0);
372 pci_read_config_dword(bridge, PCI_PREF_MEMORY_BASE, &pmem);
373 pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE, 0x0);
374 }
375 if (!pmem)
376 return;
377
378 bridge->pref_window = 1;
379
380 if ((pmem & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64) {
381
382 /*
383 * Bridge claims to have a 64-bit prefetchable memory
384 * window; verify that the upper bits are actually
385 * writable.
386 */
387 pci_read_config_dword(bridge, PCI_PREF_BASE_UPPER32, &pmem);
388 pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32,
389 0xffffffff);
390 pci_read_config_dword(bridge, PCI_PREF_BASE_UPPER32, &tmp);
391 pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32, pmem);
392 if (tmp)
393 bridge->pref_64_window = 1;
394 }
395}
396
397static void pci_read_bridge_io(struct pci_bus *child)
398{
399 struct pci_dev *dev = child->self;
400 u8 io_base_lo, io_limit_lo;
401 unsigned long io_mask, io_granularity, base, limit;
402 struct pci_bus_region region;
403 struct resource *res;
404
405 io_mask = PCI_IO_RANGE_MASK;
406 io_granularity = 0x1000;
407 if (dev->io_window_1k) {
408 /* Support 1K I/O space granularity */
409 io_mask = PCI_IO_1K_RANGE_MASK;
410 io_granularity = 0x400;
411 }
412
413 res = child->resource[0];
414 pci_read_config_byte(dev, PCI_IO_BASE, &io_base_lo);
415 pci_read_config_byte(dev, PCI_IO_LIMIT, &io_limit_lo);
416 base = (io_base_lo & io_mask) << 8;
417 limit = (io_limit_lo & io_mask) << 8;
418
419 if ((io_base_lo & PCI_IO_RANGE_TYPE_MASK) == PCI_IO_RANGE_TYPE_32) {
420 u16 io_base_hi, io_limit_hi;
421
422 pci_read_config_word(dev, PCI_IO_BASE_UPPER16, &io_base_hi);
423 pci_read_config_word(dev, PCI_IO_LIMIT_UPPER16, &io_limit_hi);
424 base |= ((unsigned long) io_base_hi << 16);
425 limit |= ((unsigned long) io_limit_hi << 16);
426 }
427
428 if (base <= limit) {
429 res->flags = (io_base_lo & PCI_IO_RANGE_TYPE_MASK) | IORESOURCE_IO;
430 region.start = base;
431 region.end = limit + io_granularity - 1;
432 pcibios_bus_to_resource(dev->bus, res, ®ion);
433 pci_info(dev, " bridge window %pR\n", res);
434 }
435}
436
437static void pci_read_bridge_mmio(struct pci_bus *child)
438{
439 struct pci_dev *dev = child->self;
440 u16 mem_base_lo, mem_limit_lo;
441 unsigned long base, limit;
442 struct pci_bus_region region;
443 struct resource *res;
444
445 res = child->resource[1];
446 pci_read_config_word(dev, PCI_MEMORY_BASE, &mem_base_lo);
447 pci_read_config_word(dev, PCI_MEMORY_LIMIT, &mem_limit_lo);
448 base = ((unsigned long) mem_base_lo & PCI_MEMORY_RANGE_MASK) << 16;
449 limit = ((unsigned long) mem_limit_lo & PCI_MEMORY_RANGE_MASK) << 16;
450 if (base <= limit) {
451 res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM;
452 region.start = base;
453 region.end = limit + 0xfffff;
454 pcibios_bus_to_resource(dev->bus, res, ®ion);
455 pci_info(dev, " bridge window %pR\n", res);
456 }
457}
458
459static void pci_read_bridge_mmio_pref(struct pci_bus *child)
460{
461 struct pci_dev *dev = child->self;
462 u16 mem_base_lo, mem_limit_lo;
463 u64 base64, limit64;
464 pci_bus_addr_t base, limit;
465 struct pci_bus_region region;
466 struct resource *res;
467
468 res = child->resource[2];
469 pci_read_config_word(dev, PCI_PREF_MEMORY_BASE, &mem_base_lo);
470 pci_read_config_word(dev, PCI_PREF_MEMORY_LIMIT, &mem_limit_lo);
471 base64 = (mem_base_lo & PCI_PREF_RANGE_MASK) << 16;
472 limit64 = (mem_limit_lo & PCI_PREF_RANGE_MASK) << 16;
473
474 if ((mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64) {
475 u32 mem_base_hi, mem_limit_hi;
476
477 pci_read_config_dword(dev, PCI_PREF_BASE_UPPER32, &mem_base_hi);
478 pci_read_config_dword(dev, PCI_PREF_LIMIT_UPPER32, &mem_limit_hi);
479
480 /*
481 * Some bridges set the base > limit by default, and some
482 * (broken) BIOSes do not initialize them. If we find
483 * this, just assume they are not being used.
484 */
485 if (mem_base_hi <= mem_limit_hi) {
486 base64 |= (u64) mem_base_hi << 32;
487 limit64 |= (u64) mem_limit_hi << 32;
488 }
489 }
490
491 base = (pci_bus_addr_t) base64;
492 limit = (pci_bus_addr_t) limit64;
493
494 if (base != base64) {
495 pci_err(dev, "can't handle bridge window above 4GB (bus address %#010llx)\n",
496 (unsigned long long) base64);
497 return;
498 }
499
500 if (base <= limit) {
501 res->flags = (mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) |
502 IORESOURCE_MEM | IORESOURCE_PREFETCH;
503 if (res->flags & PCI_PREF_RANGE_TYPE_64)
504 res->flags |= IORESOURCE_MEM_64;
505 region.start = base;
506 region.end = limit + 0xfffff;
507 pcibios_bus_to_resource(dev->bus, res, ®ion);
508 pci_info(dev, " bridge window %pR\n", res);
509 }
510}
511
512void pci_read_bridge_bases(struct pci_bus *child)
513{
514 struct pci_dev *dev = child->self;
515 struct resource *res;
516 int i;
517
518 if (pci_is_root_bus(child)) /* It's a host bus, nothing to read */
519 return;
520
521 pci_info(dev, "PCI bridge to %pR%s\n",
522 &child->busn_res,
523 dev->transparent ? " (subtractive decode)" : "");
524
525 pci_bus_remove_resources(child);
526 for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++)
527 child->resource[i] = &dev->resource[PCI_BRIDGE_RESOURCES+i];
528
529 pci_read_bridge_io(child);
530 pci_read_bridge_mmio(child);
531 pci_read_bridge_mmio_pref(child);
532
533 if (dev->transparent) {
534 pci_bus_for_each_resource(child->parent, res, i) {
535 if (res && res->flags) {
536 pci_bus_add_resource(child, res,
537 PCI_SUBTRACTIVE_DECODE);
538 pci_info(dev, " bridge window %pR (subtractive decode)\n",
539 res);
540 }
541 }
542 }
543}
544
545static struct pci_bus *pci_alloc_bus(struct pci_bus *parent)
546{
547 struct pci_bus *b;
548
549 b = kzalloc(sizeof(*b), GFP_KERNEL);
550 if (!b)
551 return NULL;
552
553 INIT_LIST_HEAD(&b->node);
554 INIT_LIST_HEAD(&b->children);
555 INIT_LIST_HEAD(&b->devices);
556 INIT_LIST_HEAD(&b->slots);
557 INIT_LIST_HEAD(&b->resources);
558 b->max_bus_speed = PCI_SPEED_UNKNOWN;
559 b->cur_bus_speed = PCI_SPEED_UNKNOWN;
560#ifdef CONFIG_PCI_DOMAINS_GENERIC
561 if (parent)
562 b->domain_nr = parent->domain_nr;
563#endif
564 return b;
565}
566
567static void devm_pci_release_host_bridge_dev(struct device *dev)
568{
569 struct pci_host_bridge *bridge = to_pci_host_bridge(dev);
570
571 if (bridge->release_fn)
572 bridge->release_fn(bridge);
573
574 pci_free_resource_list(&bridge->windows);
575}
576
577static void pci_release_host_bridge_dev(struct device *dev)
578{
579 devm_pci_release_host_bridge_dev(dev);
580 kfree(to_pci_host_bridge(dev));
581}
582
583static void pci_init_host_bridge(struct pci_host_bridge *bridge)
584{
585 INIT_LIST_HEAD(&bridge->windows);
586 INIT_LIST_HEAD(&bridge->dma_ranges);
587
588 /*
589 * We assume we can manage these PCIe features. Some systems may
590 * reserve these for use by the platform itself, e.g., an ACPI BIOS
591 * may implement its own AER handling and use _OSC to prevent the
592 * OS from interfering.
593 */
594 bridge->native_aer = 1;
595 bridge->native_pcie_hotplug = 1;
596 bridge->native_shpc_hotplug = 1;
597 bridge->native_pme = 1;
598 bridge->native_ltr = 1;
599}
600
601struct pci_host_bridge *pci_alloc_host_bridge(size_t priv)
602{
603 struct pci_host_bridge *bridge;
604
605 bridge = kzalloc(sizeof(*bridge) + priv, GFP_KERNEL);
606 if (!bridge)
607 return NULL;
608
609 pci_init_host_bridge(bridge);
610 bridge->dev.release = pci_release_host_bridge_dev;
611
612 return bridge;
613}
614EXPORT_SYMBOL(pci_alloc_host_bridge);
615
616struct pci_host_bridge *devm_pci_alloc_host_bridge(struct device *dev,
617 size_t priv)
618{
619 struct pci_host_bridge *bridge;
620
621 bridge = devm_kzalloc(dev, sizeof(*bridge) + priv, GFP_KERNEL);
622 if (!bridge)
623 return NULL;
624
625 pci_init_host_bridge(bridge);
626 bridge->dev.release = devm_pci_release_host_bridge_dev;
627
628 return bridge;
629}
630EXPORT_SYMBOL(devm_pci_alloc_host_bridge);
631
632void pci_free_host_bridge(struct pci_host_bridge *bridge)
633{
634 pci_free_resource_list(&bridge->windows);
635 pci_free_resource_list(&bridge->dma_ranges);
636
637 kfree(bridge);
638}
639EXPORT_SYMBOL(pci_free_host_bridge);
640
641static const unsigned char pcix_bus_speed[] = {
642 PCI_SPEED_UNKNOWN, /* 0 */
643 PCI_SPEED_66MHz_PCIX, /* 1 */
644 PCI_SPEED_100MHz_PCIX, /* 2 */
645 PCI_SPEED_133MHz_PCIX, /* 3 */
646 PCI_SPEED_UNKNOWN, /* 4 */
647 PCI_SPEED_66MHz_PCIX_ECC, /* 5 */
648 PCI_SPEED_100MHz_PCIX_ECC, /* 6 */
649 PCI_SPEED_133MHz_PCIX_ECC, /* 7 */
650 PCI_SPEED_UNKNOWN, /* 8 */
651 PCI_SPEED_66MHz_PCIX_266, /* 9 */
652 PCI_SPEED_100MHz_PCIX_266, /* A */
653 PCI_SPEED_133MHz_PCIX_266, /* B */
654 PCI_SPEED_UNKNOWN, /* C */
655 PCI_SPEED_66MHz_PCIX_533, /* D */
656 PCI_SPEED_100MHz_PCIX_533, /* E */
657 PCI_SPEED_133MHz_PCIX_533 /* F */
658};
659
660const unsigned char pcie_link_speed[] = {
661 PCI_SPEED_UNKNOWN, /* 0 */
662 PCIE_SPEED_2_5GT, /* 1 */
663 PCIE_SPEED_5_0GT, /* 2 */
664 PCIE_SPEED_8_0GT, /* 3 */
665 PCIE_SPEED_16_0GT, /* 4 */
666 PCIE_SPEED_32_0GT, /* 5 */
667 PCI_SPEED_UNKNOWN, /* 6 */
668 PCI_SPEED_UNKNOWN, /* 7 */
669 PCI_SPEED_UNKNOWN, /* 8 */
670 PCI_SPEED_UNKNOWN, /* 9 */
671 PCI_SPEED_UNKNOWN, /* A */
672 PCI_SPEED_UNKNOWN, /* B */
673 PCI_SPEED_UNKNOWN, /* C */
674 PCI_SPEED_UNKNOWN, /* D */
675 PCI_SPEED_UNKNOWN, /* E */
676 PCI_SPEED_UNKNOWN /* F */
677};
678
679void pcie_update_link_speed(struct pci_bus *bus, u16 linksta)
680{
681 bus->cur_bus_speed = pcie_link_speed[linksta & PCI_EXP_LNKSTA_CLS];
682}
683EXPORT_SYMBOL_GPL(pcie_update_link_speed);
684
685static unsigned char agp_speeds[] = {
686 AGP_UNKNOWN,
687 AGP_1X,
688 AGP_2X,
689 AGP_4X,
690 AGP_8X
691};
692
693static enum pci_bus_speed agp_speed(int agp3, int agpstat)
694{
695 int index = 0;
696
697 if (agpstat & 4)
698 index = 3;
699 else if (agpstat & 2)
700 index = 2;
701 else if (agpstat & 1)
702 index = 1;
703 else
704 goto out;
705
706 if (agp3) {
707 index += 2;
708 if (index == 5)
709 index = 0;
710 }
711
712 out:
713 return agp_speeds[index];
714}
715
716static void pci_set_bus_speed(struct pci_bus *bus)
717{
718 struct pci_dev *bridge = bus->self;
719 int pos;
720
721 pos = pci_find_capability(bridge, PCI_CAP_ID_AGP);
722 if (!pos)
723 pos = pci_find_capability(bridge, PCI_CAP_ID_AGP3);
724 if (pos) {
725 u32 agpstat, agpcmd;
726
727 pci_read_config_dword(bridge, pos + PCI_AGP_STATUS, &agpstat);
728 bus->max_bus_speed = agp_speed(agpstat & 8, agpstat & 7);
729
730 pci_read_config_dword(bridge, pos + PCI_AGP_COMMAND, &agpcmd);
731 bus->cur_bus_speed = agp_speed(agpstat & 8, agpcmd & 7);
732 }
733
734 pos = pci_find_capability(bridge, PCI_CAP_ID_PCIX);
735 if (pos) {
736 u16 status;
737 enum pci_bus_speed max;
738
739 pci_read_config_word(bridge, pos + PCI_X_BRIDGE_SSTATUS,
740 &status);
741
742 if (status & PCI_X_SSTATUS_533MHZ) {
743 max = PCI_SPEED_133MHz_PCIX_533;
744 } else if (status & PCI_X_SSTATUS_266MHZ) {
745 max = PCI_SPEED_133MHz_PCIX_266;
746 } else if (status & PCI_X_SSTATUS_133MHZ) {
747 if ((status & PCI_X_SSTATUS_VERS) == PCI_X_SSTATUS_V2)
748 max = PCI_SPEED_133MHz_PCIX_ECC;
749 else
750 max = PCI_SPEED_133MHz_PCIX;
751 } else {
752 max = PCI_SPEED_66MHz_PCIX;
753 }
754
755 bus->max_bus_speed = max;
756 bus->cur_bus_speed = pcix_bus_speed[
757 (status & PCI_X_SSTATUS_FREQ) >> 6];
758
759 return;
760 }
761
762 if (pci_is_pcie(bridge)) {
763 u32 linkcap;
764 u16 linksta;
765
766 pcie_capability_read_dword(bridge, PCI_EXP_LNKCAP, &linkcap);
767 bus->max_bus_speed = pcie_link_speed[linkcap & PCI_EXP_LNKCAP_SLS];
768 bridge->link_active_reporting = !!(linkcap & PCI_EXP_LNKCAP_DLLLARC);
769
770 pcie_capability_read_word(bridge, PCI_EXP_LNKSTA, &linksta);
771 pcie_update_link_speed(bus, linksta);
772 }
773}
774
775static struct irq_domain *pci_host_bridge_msi_domain(struct pci_bus *bus)
776{
777 struct irq_domain *d;
778
779 /*
780 * Any firmware interface that can resolve the msi_domain
781 * should be called from here.
782 */
783 d = pci_host_bridge_of_msi_domain(bus);
784 if (!d)
785 d = pci_host_bridge_acpi_msi_domain(bus);
786
787#ifdef CONFIG_PCI_MSI_IRQ_DOMAIN
788 /*
789 * If no IRQ domain was found via the OF tree, try looking it up
790 * directly through the fwnode_handle.
791 */
792 if (!d) {
793 struct fwnode_handle *fwnode = pci_root_bus_fwnode(bus);
794
795 if (fwnode)
796 d = irq_find_matching_fwnode(fwnode,
797 DOMAIN_BUS_PCI_MSI);
798 }
799#endif
800
801 return d;
802}
803
804static void pci_set_bus_msi_domain(struct pci_bus *bus)
805{
806 struct irq_domain *d;
807 struct pci_bus *b;
808
809 /*
810 * The bus can be a root bus, a subordinate bus, or a virtual bus
811 * created by an SR-IOV device. Walk up to the first bridge device
812 * found or derive the domain from the host bridge.
813 */
814 for (b = bus, d = NULL; !d && !pci_is_root_bus(b); b = b->parent) {
815 if (b->self)
816 d = dev_get_msi_domain(&b->self->dev);
817 }
818
819 if (!d)
820 d = pci_host_bridge_msi_domain(b);
821
822 dev_set_msi_domain(&bus->dev, d);
823}
824
825static int pci_register_host_bridge(struct pci_host_bridge *bridge)
826{
827 struct device *parent = bridge->dev.parent;
828 struct resource_entry *window, *n;
829 struct pci_bus *bus, *b;
830 resource_size_t offset;
831 LIST_HEAD(resources);
832 struct resource *res;
833 char addr[64], *fmt;
834 const char *name;
835 int err;
836
837 bus = pci_alloc_bus(NULL);
838 if (!bus)
839 return -ENOMEM;
840
841 bridge->bus = bus;
842
843 /* Temporarily move resources off the list */
844 list_splice_init(&bridge->windows, &resources);
845 bus->sysdata = bridge->sysdata;
846 bus->msi = bridge->msi;
847 bus->ops = bridge->ops;
848 bus->number = bus->busn_res.start = bridge->busnr;
849#ifdef CONFIG_PCI_DOMAINS_GENERIC
850 bus->domain_nr = pci_bus_find_domain_nr(bus, parent);
851#endif
852
853 b = pci_find_bus(pci_domain_nr(bus), bridge->busnr);
854 if (b) {
855 /* Ignore it if we already got here via a different bridge */
856 dev_dbg(&b->dev, "bus already known\n");
857 err = -EEXIST;
858 goto free;
859 }
860
861 dev_set_name(&bridge->dev, "pci%04x:%02x", pci_domain_nr(bus),
862 bridge->busnr);
863
864 err = pcibios_root_bridge_prepare(bridge);
865 if (err)
866 goto free;
867
868 err = device_register(&bridge->dev);
869 if (err)
870 put_device(&bridge->dev);
871
872 bus->bridge = get_device(&bridge->dev);
873 device_enable_async_suspend(bus->bridge);
874 pci_set_bus_of_node(bus);
875 pci_set_bus_msi_domain(bus);
876
877 if (!parent)
878 set_dev_node(bus->bridge, pcibus_to_node(bus));
879
880 bus->dev.class = &pcibus_class;
881 bus->dev.parent = bus->bridge;
882
883 dev_set_name(&bus->dev, "%04x:%02x", pci_domain_nr(bus), bus->number);
884 name = dev_name(&bus->dev);
885
886 err = device_register(&bus->dev);
887 if (err)
888 goto unregister;
889
890 pcibios_add_bus(bus);
891
892 /* Create legacy_io and legacy_mem files for this bus */
893 pci_create_legacy_files(bus);
894
895 if (parent)
896 dev_info(parent, "PCI host bridge to bus %s\n", name);
897 else
898 pr_info("PCI host bridge to bus %s\n", name);
899
900 /* Add initial resources to the bus */
901 resource_list_for_each_entry_safe(window, n, &resources) {
902 list_move_tail(&window->node, &bridge->windows);
903 offset = window->offset;
904 res = window->res;
905
906 if (res->flags & IORESOURCE_BUS)
907 pci_bus_insert_busn_res(bus, bus->number, res->end);
908 else
909 pci_bus_add_resource(bus, res, 0);
910
911 if (offset) {
912 if (resource_type(res) == IORESOURCE_IO)
913 fmt = " (bus address [%#06llx-%#06llx])";
914 else
915 fmt = " (bus address [%#010llx-%#010llx])";
916
917 snprintf(addr, sizeof(addr), fmt,
918 (unsigned long long)(res->start - offset),
919 (unsigned long long)(res->end - offset));
920 } else
921 addr[0] = '\0';
922
923 dev_info(&bus->dev, "root bus resource %pR%s\n", res, addr);
924 }
925
926 down_write(&pci_bus_sem);
927 list_add_tail(&bus->node, &pci_root_buses);
928 up_write(&pci_bus_sem);
929
930 return 0;
931
932unregister:
933 put_device(&bridge->dev);
934 device_unregister(&bridge->dev);
935
936free:
937 kfree(bus);
938 return err;
939}
940
941static bool pci_bridge_child_ext_cfg_accessible(struct pci_dev *bridge)
942{
943 int pos;
944 u32 status;
945
946 /*
947 * If extended config space isn't accessible on a bridge's primary
948 * bus, we certainly can't access it on the secondary bus.
949 */
950 if (bridge->bus->bus_flags & PCI_BUS_FLAGS_NO_EXTCFG)
951 return false;
952
953 /*
954 * PCIe Root Ports and switch ports are PCIe on both sides, so if
955 * extended config space is accessible on the primary, it's also
956 * accessible on the secondary.
957 */
958 if (pci_is_pcie(bridge) &&
959 (pci_pcie_type(bridge) == PCI_EXP_TYPE_ROOT_PORT ||
960 pci_pcie_type(bridge) == PCI_EXP_TYPE_UPSTREAM ||
961 pci_pcie_type(bridge) == PCI_EXP_TYPE_DOWNSTREAM))
962 return true;
963
964 /*
965 * For the other bridge types:
966 * - PCI-to-PCI bridges
967 * - PCIe-to-PCI/PCI-X forward bridges
968 * - PCI/PCI-X-to-PCIe reverse bridges
969 * extended config space on the secondary side is only accessible
970 * if the bridge supports PCI-X Mode 2.
971 */
972 pos = pci_find_capability(bridge, PCI_CAP_ID_PCIX);
973 if (!pos)
974 return false;
975
976 pci_read_config_dword(bridge, pos + PCI_X_STATUS, &status);
977 return status & (PCI_X_STATUS_266MHZ | PCI_X_STATUS_533MHZ);
978}
979
980static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent,
981 struct pci_dev *bridge, int busnr)
982{
983 struct pci_bus *child;
984 int i;
985 int ret;
986
987 /* Allocate a new bus and inherit stuff from the parent */
988 child = pci_alloc_bus(parent);
989 if (!child)
990 return NULL;
991
992 child->parent = parent;
993 child->ops = parent->ops;
994 child->msi = parent->msi;
995 child->sysdata = parent->sysdata;
996 child->bus_flags = parent->bus_flags;
997
998 /*
999 * Initialize some portions of the bus device, but don't register
1000 * it now as the parent is not properly set up yet.
1001 */
1002 child->dev.class = &pcibus_class;
1003 dev_set_name(&child->dev, "%04x:%02x", pci_domain_nr(child), busnr);
1004
1005 /* Set up the primary, secondary and subordinate bus numbers */
1006 child->number = child->busn_res.start = busnr;
1007 child->primary = parent->busn_res.start;
1008 child->busn_res.end = 0xff;
1009
1010 if (!bridge) {
1011 child->dev.parent = parent->bridge;
1012 goto add_dev;
1013 }
1014
1015 child->self = bridge;
1016 child->bridge = get_device(&bridge->dev);
1017 child->dev.parent = child->bridge;
1018 pci_set_bus_of_node(child);
1019 pci_set_bus_speed(child);
1020
1021 /*
1022 * Check whether extended config space is accessible on the child
1023 * bus. Note that we currently assume it is always accessible on
1024 * the root bus.
1025 */
1026 if (!pci_bridge_child_ext_cfg_accessible(bridge)) {
1027 child->bus_flags |= PCI_BUS_FLAGS_NO_EXTCFG;
1028 pci_info(child, "extended config space not accessible\n");
1029 }
1030
1031 /* Set up default resource pointers and names */
1032 for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++) {
1033 child->resource[i] = &bridge->resource[PCI_BRIDGE_RESOURCES+i];
1034 child->resource[i]->name = child->name;
1035 }
1036 bridge->subordinate = child;
1037
1038add_dev:
1039 pci_set_bus_msi_domain(child);
1040 ret = device_register(&child->dev);
1041 WARN_ON(ret < 0);
1042
1043 pcibios_add_bus(child);
1044
1045 if (child->ops->add_bus) {
1046 ret = child->ops->add_bus(child);
1047 if (WARN_ON(ret < 0))
1048 dev_err(&child->dev, "failed to add bus: %d\n", ret);
1049 }
1050
1051 /* Create legacy_io and legacy_mem files for this bus */
1052 pci_create_legacy_files(child);
1053
1054 return child;
1055}
1056
1057struct pci_bus *pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev,
1058 int busnr)
1059{
1060 struct pci_bus *child;
1061
1062 child = pci_alloc_child_bus(parent, dev, busnr);
1063 if (child) {
1064 down_write(&pci_bus_sem);
1065 list_add_tail(&child->node, &parent->children);
1066 up_write(&pci_bus_sem);
1067 }
1068 return child;
1069}
1070EXPORT_SYMBOL(pci_add_new_bus);
1071
1072static void pci_enable_crs(struct pci_dev *pdev)
1073{
1074 u16 root_cap = 0;
1075
1076 /* Enable CRS Software Visibility if supported */
1077 pcie_capability_read_word(pdev, PCI_EXP_RTCAP, &root_cap);
1078 if (root_cap & PCI_EXP_RTCAP_CRSVIS)
1079 pcie_capability_set_word(pdev, PCI_EXP_RTCTL,
1080 PCI_EXP_RTCTL_CRSSVE);
1081}
1082
1083static unsigned int pci_scan_child_bus_extend(struct pci_bus *bus,
1084 unsigned int available_buses);
1085/**
1086 * pci_ea_fixed_busnrs() - Read fixed Secondary and Subordinate bus
1087 * numbers from EA capability.
1088 * @dev: Bridge
1089 * @sec: updated with secondary bus number from EA
1090 * @sub: updated with subordinate bus number from EA
1091 *
1092 * If @dev is a bridge with EA capability, update @sec and @sub with
1093 * fixed bus numbers from the capability and return true. Otherwise,
1094 * return false.
1095 */
1096static bool pci_ea_fixed_busnrs(struct pci_dev *dev, u8 *sec, u8 *sub)
1097{
1098 int ea, offset;
1099 u32 dw;
1100
1101 if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE)
1102 return false;
1103
1104 /* find PCI EA capability in list */
1105 ea = pci_find_capability(dev, PCI_CAP_ID_EA);
1106 if (!ea)
1107 return false;
1108
1109 offset = ea + PCI_EA_FIRST_ENT;
1110 pci_read_config_dword(dev, offset, &dw);
1111 *sec = dw & PCI_EA_SEC_BUS_MASK;
1112 *sub = (dw & PCI_EA_SUB_BUS_MASK) >> PCI_EA_SUB_BUS_SHIFT;
1113 return true;
1114}
1115
1116/*
1117 * pci_scan_bridge_extend() - Scan buses behind a bridge
1118 * @bus: Parent bus the bridge is on
1119 * @dev: Bridge itself
1120 * @max: Starting subordinate number of buses behind this bridge
1121 * @available_buses: Total number of buses available for this bridge and
1122 * the devices below. After the minimal bus space has
1123 * been allocated the remaining buses will be
1124 * distributed equally between hotplug-capable bridges.
1125 * @pass: Either %0 (scan already configured bridges) or %1 (scan bridges
1126 * that need to be reconfigured.
1127 *
1128 * If it's a bridge, configure it and scan the bus behind it.
1129 * For CardBus bridges, we don't scan behind as the devices will
1130 * be handled by the bridge driver itself.
1131 *
1132 * We need to process bridges in two passes -- first we scan those
1133 * already configured by the BIOS and after we are done with all of
1134 * them, we proceed to assigning numbers to the remaining buses in
1135 * order to avoid overlaps between old and new bus numbers.
1136 *
1137 * Return: New subordinate number covering all buses behind this bridge.
1138 */
1139static int pci_scan_bridge_extend(struct pci_bus *bus, struct pci_dev *dev,
1140 int max, unsigned int available_buses,
1141 int pass)
1142{
1143 struct pci_bus *child;
1144 int is_cardbus = (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS);
1145 u32 buses, i, j = 0;
1146 u16 bctl;
1147 u8 primary, secondary, subordinate;
1148 int broken = 0;
1149 bool fixed_buses;
1150 u8 fixed_sec, fixed_sub;
1151 int next_busnr;
1152
1153 /*
1154 * Make sure the bridge is powered on to be able to access config
1155 * space of devices below it.
1156 */
1157 pm_runtime_get_sync(&dev->dev);
1158
1159 pci_read_config_dword(dev, PCI_PRIMARY_BUS, &buses);
1160 primary = buses & 0xFF;
1161 secondary = (buses >> 8) & 0xFF;
1162 subordinate = (buses >> 16) & 0xFF;
1163
1164 pci_dbg(dev, "scanning [bus %02x-%02x] behind bridge, pass %d\n",
1165 secondary, subordinate, pass);
1166
1167 if (!primary && (primary != bus->number) && secondary && subordinate) {
1168 pci_warn(dev, "Primary bus is hard wired to 0\n");
1169 primary = bus->number;
1170 }
1171
1172 /* Check if setup is sensible at all */
1173 if (!pass &&
1174 (primary != bus->number || secondary <= bus->number ||
1175 secondary > subordinate)) {
1176 pci_info(dev, "bridge configuration invalid ([bus %02x-%02x]), reconfiguring\n",
1177 secondary, subordinate);
1178 broken = 1;
1179 }
1180
1181 /*
1182 * Disable Master-Abort Mode during probing to avoid reporting of
1183 * bus errors in some architectures.
1184 */
1185 pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &bctl);
1186 pci_write_config_word(dev, PCI_BRIDGE_CONTROL,
1187 bctl & ~PCI_BRIDGE_CTL_MASTER_ABORT);
1188
1189 pci_enable_crs(dev);
1190
1191 if ((secondary || subordinate) && !pcibios_assign_all_busses() &&
1192 !is_cardbus && !broken) {
1193 unsigned int cmax;
1194
1195 /*
1196 * Bus already configured by firmware, process it in the
1197 * first pass and just note the configuration.
1198 */
1199 if (pass)
1200 goto out;
1201
1202 /*
1203 * The bus might already exist for two reasons: Either we
1204 * are rescanning the bus or the bus is reachable through
1205 * more than one bridge. The second case can happen with
1206 * the i450NX chipset.
1207 */
1208 child = pci_find_bus(pci_domain_nr(bus), secondary);
1209 if (!child) {
1210 child = pci_add_new_bus(bus, dev, secondary);
1211 if (!child)
1212 goto out;
1213 child->primary = primary;
1214 pci_bus_insert_busn_res(child, secondary, subordinate);
1215 child->bridge_ctl = bctl;
1216 }
1217
1218 cmax = pci_scan_child_bus(child);
1219 if (cmax > subordinate)
1220 pci_warn(dev, "bridge has subordinate %02x but max busn %02x\n",
1221 subordinate, cmax);
1222
1223 /* Subordinate should equal child->busn_res.end */
1224 if (subordinate > max)
1225 max = subordinate;
1226 } else {
1227
1228 /*
1229 * We need to assign a number to this bus which we always
1230 * do in the second pass.
1231 */
1232 if (!pass) {
1233 if (pcibios_assign_all_busses() || broken || is_cardbus)
1234
1235 /*
1236 * Temporarily disable forwarding of the
1237 * configuration cycles on all bridges in
1238 * this bus segment to avoid possible
1239 * conflicts in the second pass between two
1240 * bridges programmed with overlapping bus
1241 * ranges.
1242 */
1243 pci_write_config_dword(dev, PCI_PRIMARY_BUS,
1244 buses & ~0xffffff);
1245 goto out;
1246 }
1247
1248 /* Clear errors */
1249 pci_write_config_word(dev, PCI_STATUS, 0xffff);
1250
1251 /* Read bus numbers from EA Capability (if present) */
1252 fixed_buses = pci_ea_fixed_busnrs(dev, &fixed_sec, &fixed_sub);
1253 if (fixed_buses)
1254 next_busnr = fixed_sec;
1255 else
1256 next_busnr = max + 1;
1257
1258 /*
1259 * Prevent assigning a bus number that already exists.
1260 * This can happen when a bridge is hot-plugged, so in this
1261 * case we only re-scan this bus.
1262 */
1263 child = pci_find_bus(pci_domain_nr(bus), next_busnr);
1264 if (!child) {
1265 child = pci_add_new_bus(bus, dev, next_busnr);
1266 if (!child)
1267 goto out;
1268 pci_bus_insert_busn_res(child, next_busnr,
1269 bus->busn_res.end);
1270 }
1271 max++;
1272 if (available_buses)
1273 available_buses--;
1274
1275 buses = (buses & 0xff000000)
1276 | ((unsigned int)(child->primary) << 0)
1277 | ((unsigned int)(child->busn_res.start) << 8)
1278 | ((unsigned int)(child->busn_res.end) << 16);
1279
1280 /*
1281 * yenta.c forces a secondary latency timer of 176.
1282 * Copy that behaviour here.
1283 */
1284 if (is_cardbus) {
1285 buses &= ~0xff000000;
1286 buses |= CARDBUS_LATENCY_TIMER << 24;
1287 }
1288
1289 /* We need to blast all three values with a single write */
1290 pci_write_config_dword(dev, PCI_PRIMARY_BUS, buses);
1291
1292 if (!is_cardbus) {
1293 child->bridge_ctl = bctl;
1294 max = pci_scan_child_bus_extend(child, available_buses);
1295 } else {
1296
1297 /*
1298 * For CardBus bridges, we leave 4 bus numbers as
1299 * cards with a PCI-to-PCI bridge can be inserted
1300 * later.
1301 */
1302 for (i = 0; i < CARDBUS_RESERVE_BUSNR; i++) {
1303 struct pci_bus *parent = bus;
1304 if (pci_find_bus(pci_domain_nr(bus),
1305 max+i+1))
1306 break;
1307 while (parent->parent) {
1308 if ((!pcibios_assign_all_busses()) &&
1309 (parent->busn_res.end > max) &&
1310 (parent->busn_res.end <= max+i)) {
1311 j = 1;
1312 }
1313 parent = parent->parent;
1314 }
1315 if (j) {
1316
1317 /*
1318 * Often, there are two CardBus
1319 * bridges -- try to leave one
1320 * valid bus number for each one.
1321 */
1322 i /= 2;
1323 break;
1324 }
1325 }
1326 max += i;
1327 }
1328
1329 /*
1330 * Set subordinate bus number to its real value.
1331 * If fixed subordinate bus number exists from EA
1332 * capability then use it.
1333 */
1334 if (fixed_buses)
1335 max = fixed_sub;
1336 pci_bus_update_busn_res_end(child, max);
1337 pci_write_config_byte(dev, PCI_SUBORDINATE_BUS, max);
1338 }
1339
1340 sprintf(child->name,
1341 (is_cardbus ? "PCI CardBus %04x:%02x" : "PCI Bus %04x:%02x"),
1342 pci_domain_nr(bus), child->number);
1343
1344 /* Check that all devices are accessible */
1345 while (bus->parent) {
1346 if ((child->busn_res.end > bus->busn_res.end) ||
1347 (child->number > bus->busn_res.end) ||
1348 (child->number < bus->number) ||
1349 (child->busn_res.end < bus->number)) {
1350 dev_info(&dev->dev, "devices behind bridge are unusable because %pR cannot be assigned for them\n",
1351 &child->busn_res);
1352 break;
1353 }
1354 bus = bus->parent;
1355 }
1356
1357out:
1358 pci_write_config_word(dev, PCI_BRIDGE_CONTROL, bctl);
1359
1360 pm_runtime_put(&dev->dev);
1361
1362 return max;
1363}
1364
1365/*
1366 * pci_scan_bridge() - Scan buses behind a bridge
1367 * @bus: Parent bus the bridge is on
1368 * @dev: Bridge itself
1369 * @max: Starting subordinate number of buses behind this bridge
1370 * @pass: Either %0 (scan already configured bridges) or %1 (scan bridges
1371 * that need to be reconfigured.
1372 *
1373 * If it's a bridge, configure it and scan the bus behind it.
1374 * For CardBus bridges, we don't scan behind as the devices will
1375 * be handled by the bridge driver itself.
1376 *
1377 * We need to process bridges in two passes -- first we scan those
1378 * already configured by the BIOS and after we are done with all of
1379 * them, we proceed to assigning numbers to the remaining buses in
1380 * order to avoid overlaps between old and new bus numbers.
1381 *
1382 * Return: New subordinate number covering all buses behind this bridge.
1383 */
1384int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass)
1385{
1386 return pci_scan_bridge_extend(bus, dev, max, 0, pass);
1387}
1388EXPORT_SYMBOL(pci_scan_bridge);
1389
1390/*
1391 * Read interrupt line and base address registers.
1392 * The architecture-dependent code can tweak these, of course.
1393 */
1394static void pci_read_irq(struct pci_dev *dev)
1395{
1396 unsigned char irq;
1397
1398 /* VFs are not allowed to use INTx, so skip the config reads */
1399 if (dev->is_virtfn) {
1400 dev->pin = 0;
1401 dev->irq = 0;
1402 return;
1403 }
1404
1405 pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &irq);
1406 dev->pin = irq;
1407 if (irq)
1408 pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
1409 dev->irq = irq;
1410}
1411
1412void set_pcie_port_type(struct pci_dev *pdev)
1413{
1414 int pos;
1415 u16 reg16;
1416 int type;
1417 struct pci_dev *parent;
1418
1419 pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
1420 if (!pos)
1421 return;
1422
1423 pdev->pcie_cap = pos;
1424 pci_read_config_word(pdev, pos + PCI_EXP_FLAGS, ®16);
1425 pdev->pcie_flags_reg = reg16;
1426 pci_read_config_word(pdev, pos + PCI_EXP_DEVCAP, ®16);
1427 pdev->pcie_mpss = reg16 & PCI_EXP_DEVCAP_PAYLOAD;
1428
1429 parent = pci_upstream_bridge(pdev);
1430 if (!parent)
1431 return;
1432
1433 /*
1434 * Some systems do not identify their upstream/downstream ports
1435 * correctly so detect impossible configurations here and correct
1436 * the port type accordingly.
1437 */
1438 type = pci_pcie_type(pdev);
1439 if (type == PCI_EXP_TYPE_DOWNSTREAM) {
1440 /*
1441 * If pdev claims to be downstream port but the parent
1442 * device is also downstream port assume pdev is actually
1443 * upstream port.
1444 */
1445 if (pcie_downstream_port(parent)) {
1446 pci_info(pdev, "claims to be downstream port but is acting as upstream port, correcting type\n");
1447 pdev->pcie_flags_reg &= ~PCI_EXP_FLAGS_TYPE;
1448 pdev->pcie_flags_reg |= PCI_EXP_TYPE_UPSTREAM;
1449 }
1450 } else if (type == PCI_EXP_TYPE_UPSTREAM) {
1451 /*
1452 * If pdev claims to be upstream port but the parent
1453 * device is also upstream port assume pdev is actually
1454 * downstream port.
1455 */
1456 if (pci_pcie_type(parent) == PCI_EXP_TYPE_UPSTREAM) {
1457 pci_info(pdev, "claims to be upstream port but is acting as downstream port, correcting type\n");
1458 pdev->pcie_flags_reg &= ~PCI_EXP_FLAGS_TYPE;
1459 pdev->pcie_flags_reg |= PCI_EXP_TYPE_DOWNSTREAM;
1460 }
1461 }
1462}
1463
1464void set_pcie_hotplug_bridge(struct pci_dev *pdev)
1465{
1466 u32 reg32;
1467
1468 pcie_capability_read_dword(pdev, PCI_EXP_SLTCAP, ®32);
1469 if (reg32 & PCI_EXP_SLTCAP_HPC)
1470 pdev->is_hotplug_bridge = 1;
1471}
1472
1473static void set_pcie_thunderbolt(struct pci_dev *dev)
1474{
1475 int vsec = 0;
1476 u32 header;
1477
1478 while ((vsec = pci_find_next_ext_capability(dev, vsec,
1479 PCI_EXT_CAP_ID_VNDR))) {
1480 pci_read_config_dword(dev, vsec + PCI_VNDR_HEADER, &header);
1481
1482 /* Is the device part of a Thunderbolt controller? */
1483 if (dev->vendor == PCI_VENDOR_ID_INTEL &&
1484 PCI_VNDR_HEADER_ID(header) == PCI_VSEC_ID_INTEL_TBT) {
1485 dev->is_thunderbolt = 1;
1486 return;
1487 }
1488 }
1489}
1490
1491static void set_pcie_untrusted(struct pci_dev *dev)
1492{
1493 struct pci_dev *parent;
1494
1495 /*
1496 * If the upstream bridge is untrusted we treat this device
1497 * untrusted as well.
1498 */
1499 parent = pci_upstream_bridge(dev);
1500 if (parent && parent->untrusted)
1501 dev->untrusted = true;
1502}
1503
1504/**
1505 * pci_ext_cfg_is_aliased - Is ext config space just an alias of std config?
1506 * @dev: PCI device
1507 *
1508 * PCI Express to PCI/PCI-X Bridge Specification, rev 1.0, 4.1.4 says that
1509 * when forwarding a type1 configuration request the bridge must check that
1510 * the extended register address field is zero. The bridge is not permitted
1511 * to forward the transactions and must handle it as an Unsupported Request.
1512 * Some bridges do not follow this rule and simply drop the extended register
1513 * bits, resulting in the standard config space being aliased, every 256
1514 * bytes across the entire configuration space. Test for this condition by
1515 * comparing the first dword of each potential alias to the vendor/device ID.
1516 * Known offenders:
1517 * ASM1083/1085 PCIe-to-PCI Reversible Bridge (1b21:1080, rev 01 & 03)
1518 * AMD/ATI SBx00 PCI to PCI Bridge (1002:4384, rev 40)
1519 */
1520static bool pci_ext_cfg_is_aliased(struct pci_dev *dev)
1521{
1522#ifdef CONFIG_PCI_QUIRKS
1523 int pos;
1524 u32 header, tmp;
1525
1526 pci_read_config_dword(dev, PCI_VENDOR_ID, &header);
1527
1528 for (pos = PCI_CFG_SPACE_SIZE;
1529 pos < PCI_CFG_SPACE_EXP_SIZE; pos += PCI_CFG_SPACE_SIZE) {
1530 if (pci_read_config_dword(dev, pos, &tmp) != PCIBIOS_SUCCESSFUL
1531 || header != tmp)
1532 return false;
1533 }
1534
1535 return true;
1536#else
1537 return false;
1538#endif
1539}
1540
1541/**
1542 * pci_cfg_space_size - Get the configuration space size of the PCI device
1543 * @dev: PCI device
1544 *
1545 * Regular PCI devices have 256 bytes, but PCI-X 2 and PCI Express devices
1546 * have 4096 bytes. Even if the device is capable, that doesn't mean we can
1547 * access it. Maybe we don't have a way to generate extended config space
1548 * accesses, or the device is behind a reverse Express bridge. So we try
1549 * reading the dword at 0x100 which must either be 0 or a valid extended
1550 * capability header.
1551 */
1552static int pci_cfg_space_size_ext(struct pci_dev *dev)
1553{
1554 u32 status;
1555 int pos = PCI_CFG_SPACE_SIZE;
1556
1557 if (pci_read_config_dword(dev, pos, &status) != PCIBIOS_SUCCESSFUL)
1558 return PCI_CFG_SPACE_SIZE;
1559 if (status == 0xffffffff || pci_ext_cfg_is_aliased(dev))
1560 return PCI_CFG_SPACE_SIZE;
1561
1562 return PCI_CFG_SPACE_EXP_SIZE;
1563}
1564
1565int pci_cfg_space_size(struct pci_dev *dev)
1566{
1567 int pos;
1568 u32 status;
1569 u16 class;
1570
1571#ifdef CONFIG_PCI_IOV
1572 /*
1573 * Per the SR-IOV specification (rev 1.1, sec 3.5), VFs are required to
1574 * implement a PCIe capability and therefore must implement extended
1575 * config space. We can skip the NO_EXTCFG test below and the
1576 * reachability/aliasing test in pci_cfg_space_size_ext() by virtue of
1577 * the fact that the SR-IOV capability on the PF resides in extended
1578 * config space and must be accessible and non-aliased to have enabled
1579 * support for this VF. This is a micro performance optimization for
1580 * systems supporting many VFs.
1581 */
1582 if (dev->is_virtfn)
1583 return PCI_CFG_SPACE_EXP_SIZE;
1584#endif
1585
1586 if (dev->bus->bus_flags & PCI_BUS_FLAGS_NO_EXTCFG)
1587 return PCI_CFG_SPACE_SIZE;
1588
1589 class = dev->class >> 8;
1590 if (class == PCI_CLASS_BRIDGE_HOST)
1591 return pci_cfg_space_size_ext(dev);
1592
1593 if (pci_is_pcie(dev))
1594 return pci_cfg_space_size_ext(dev);
1595
1596 pos = pci_find_capability(dev, PCI_CAP_ID_PCIX);
1597 if (!pos)
1598 return PCI_CFG_SPACE_SIZE;
1599
1600 pci_read_config_dword(dev, pos + PCI_X_STATUS, &status);
1601 if (status & (PCI_X_STATUS_266MHZ | PCI_X_STATUS_533MHZ))
1602 return pci_cfg_space_size_ext(dev);
1603
1604 return PCI_CFG_SPACE_SIZE;
1605}
1606
1607static u32 pci_class(struct pci_dev *dev)
1608{
1609 u32 class;
1610
1611#ifdef CONFIG_PCI_IOV
1612 if (dev->is_virtfn)
1613 return dev->physfn->sriov->class;
1614#endif
1615 pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
1616 return class;
1617}
1618
1619static void pci_subsystem_ids(struct pci_dev *dev, u16 *vendor, u16 *device)
1620{
1621#ifdef CONFIG_PCI_IOV
1622 if (dev->is_virtfn) {
1623 *vendor = dev->physfn->sriov->subsystem_vendor;
1624 *device = dev->physfn->sriov->subsystem_device;
1625 return;
1626 }
1627#endif
1628 pci_read_config_word(dev, PCI_SUBSYSTEM_VENDOR_ID, vendor);
1629 pci_read_config_word(dev, PCI_SUBSYSTEM_ID, device);
1630}
1631
1632static u8 pci_hdr_type(struct pci_dev *dev)
1633{
1634 u8 hdr_type;
1635
1636#ifdef CONFIG_PCI_IOV
1637 if (dev->is_virtfn)
1638 return dev->physfn->sriov->hdr_type;
1639#endif
1640 pci_read_config_byte(dev, PCI_HEADER_TYPE, &hdr_type);
1641 return hdr_type;
1642}
1643
1644#define LEGACY_IO_RESOURCE (IORESOURCE_IO | IORESOURCE_PCI_FIXED)
1645
1646static void pci_msi_setup_pci_dev(struct pci_dev *dev)
1647{
1648 /*
1649 * Disable the MSI hardware to avoid screaming interrupts
1650 * during boot. This is the power on reset default so
1651 * usually this should be a noop.
1652 */
1653 dev->msi_cap = pci_find_capability(dev, PCI_CAP_ID_MSI);
1654 if (dev->msi_cap)
1655 pci_msi_set_enable(dev, 0);
1656
1657 dev->msix_cap = pci_find_capability(dev, PCI_CAP_ID_MSIX);
1658 if (dev->msix_cap)
1659 pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
1660}
1661
1662/**
1663 * pci_intx_mask_broken - Test PCI_COMMAND_INTX_DISABLE writability
1664 * @dev: PCI device
1665 *
1666 * Test whether PCI_COMMAND_INTX_DISABLE is writable for @dev. Check this
1667 * at enumeration-time to avoid modifying PCI_COMMAND at run-time.
1668 */
1669static int pci_intx_mask_broken(struct pci_dev *dev)
1670{
1671 u16 orig, toggle, new;
1672
1673 pci_read_config_word(dev, PCI_COMMAND, &orig);
1674 toggle = orig ^ PCI_COMMAND_INTX_DISABLE;
1675 pci_write_config_word(dev, PCI_COMMAND, toggle);
1676 pci_read_config_word(dev, PCI_COMMAND, &new);
1677
1678 pci_write_config_word(dev, PCI_COMMAND, orig);
1679
1680 /*
1681 * PCI_COMMAND_INTX_DISABLE was reserved and read-only prior to PCI
1682 * r2.3, so strictly speaking, a device is not *broken* if it's not
1683 * writable. But we'll live with the misnomer for now.
1684 */
1685 if (new != toggle)
1686 return 1;
1687 return 0;
1688}
1689
1690static void early_dump_pci_device(struct pci_dev *pdev)
1691{
1692 u32 value[256 / 4];
1693 int i;
1694
1695 pci_info(pdev, "config space:\n");
1696
1697 for (i = 0; i < 256; i += 4)
1698 pci_read_config_dword(pdev, i, &value[i / 4]);
1699
1700 print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 1,
1701 value, 256, false);
1702}
1703
1704/**
1705 * pci_setup_device - Fill in class and map information of a device
1706 * @dev: the device structure to fill
1707 *
1708 * Initialize the device structure with information about the device's
1709 * vendor,class,memory and IO-space addresses, IRQ lines etc.
1710 * Called at initialisation of the PCI subsystem and by CardBus services.
1711 * Returns 0 on success and negative if unknown type of device (not normal,
1712 * bridge or CardBus).
1713 */
1714int pci_setup_device(struct pci_dev *dev)
1715{
1716 u32 class;
1717 u16 cmd;
1718 u8 hdr_type;
1719 int pos = 0;
1720 struct pci_bus_region region;
1721 struct resource *res;
1722
1723 hdr_type = pci_hdr_type(dev);
1724
1725 dev->sysdata = dev->bus->sysdata;
1726 dev->dev.parent = dev->bus->bridge;
1727 dev->dev.bus = &pci_bus_type;
1728 dev->hdr_type = hdr_type & 0x7f;
1729 dev->multifunction = !!(hdr_type & 0x80);
1730 dev->error_state = pci_channel_io_normal;
1731 set_pcie_port_type(dev);
1732
1733 pci_dev_assign_slot(dev);
1734
1735 /*
1736 * Assume 32-bit PCI; let 64-bit PCI cards (which are far rarer)
1737 * set this higher, assuming the system even supports it.
1738 */
1739 dev->dma_mask = 0xffffffff;
1740
1741 dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(dev->bus),
1742 dev->bus->number, PCI_SLOT(dev->devfn),
1743 PCI_FUNC(dev->devfn));
1744
1745 class = pci_class(dev);
1746
1747 dev->revision = class & 0xff;
1748 dev->class = class >> 8; /* upper 3 bytes */
1749
1750 pci_info(dev, "[%04x:%04x] type %02x class %#08x\n",
1751 dev->vendor, dev->device, dev->hdr_type, dev->class);
1752
1753 if (pci_early_dump)
1754 early_dump_pci_device(dev);
1755
1756 /* Need to have dev->class ready */
1757 dev->cfg_size = pci_cfg_space_size(dev);
1758
1759 /* Need to have dev->cfg_size ready */
1760 set_pcie_thunderbolt(dev);
1761
1762 set_pcie_untrusted(dev);
1763
1764 /* "Unknown power state" */
1765 dev->current_state = PCI_UNKNOWN;
1766
1767 /* Early fixups, before probing the BARs */
1768 pci_fixup_device(pci_fixup_early, dev);
1769
1770 /* Device class may be changed after fixup */
1771 class = dev->class >> 8;
1772
1773 if (dev->non_compliant_bars) {
1774 pci_read_config_word(dev, PCI_COMMAND, &cmd);
1775 if (cmd & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
1776 pci_info(dev, "device has non-compliant BARs; disabling IO/MEM decoding\n");
1777 cmd &= ~PCI_COMMAND_IO;
1778 cmd &= ~PCI_COMMAND_MEMORY;
1779 pci_write_config_word(dev, PCI_COMMAND, cmd);
1780 }
1781 }
1782
1783 dev->broken_intx_masking = pci_intx_mask_broken(dev);
1784
1785 switch (dev->hdr_type) { /* header type */
1786 case PCI_HEADER_TYPE_NORMAL: /* standard header */
1787 if (class == PCI_CLASS_BRIDGE_PCI)
1788 goto bad;
1789 pci_read_irq(dev);
1790 pci_read_bases(dev, 6, PCI_ROM_ADDRESS);
1791
1792 pci_subsystem_ids(dev, &dev->subsystem_vendor, &dev->subsystem_device);
1793
1794 /*
1795 * Do the ugly legacy mode stuff here rather than broken chip
1796 * quirk code. Legacy mode ATA controllers have fixed
1797 * addresses. These are not always echoed in BAR0-3, and
1798 * BAR0-3 in a few cases contain junk!
1799 */
1800 if (class == PCI_CLASS_STORAGE_IDE) {
1801 u8 progif;
1802 pci_read_config_byte(dev, PCI_CLASS_PROG, &progif);
1803 if ((progif & 1) == 0) {
1804 region.start = 0x1F0;
1805 region.end = 0x1F7;
1806 res = &dev->resource[0];
1807 res->flags = LEGACY_IO_RESOURCE;
1808 pcibios_bus_to_resource(dev->bus, res, ®ion);
1809 pci_info(dev, "legacy IDE quirk: reg 0x10: %pR\n",
1810 res);
1811 region.start = 0x3F6;
1812 region.end = 0x3F6;
1813 res = &dev->resource[1];
1814 res->flags = LEGACY_IO_RESOURCE;
1815 pcibios_bus_to_resource(dev->bus, res, ®ion);
1816 pci_info(dev, "legacy IDE quirk: reg 0x14: %pR\n",
1817 res);
1818 }
1819 if ((progif & 4) == 0) {
1820 region.start = 0x170;
1821 region.end = 0x177;
1822 res = &dev->resource[2];
1823 res->flags = LEGACY_IO_RESOURCE;
1824 pcibios_bus_to_resource(dev->bus, res, ®ion);
1825 pci_info(dev, "legacy IDE quirk: reg 0x18: %pR\n",
1826 res);
1827 region.start = 0x376;
1828 region.end = 0x376;
1829 res = &dev->resource[3];
1830 res->flags = LEGACY_IO_RESOURCE;
1831 pcibios_bus_to_resource(dev->bus, res, ®ion);
1832 pci_info(dev, "legacy IDE quirk: reg 0x1c: %pR\n",
1833 res);
1834 }
1835 }
1836 break;
1837
1838 case PCI_HEADER_TYPE_BRIDGE: /* bridge header */
1839 /*
1840 * The PCI-to-PCI bridge spec requires that subtractive
1841 * decoding (i.e. transparent) bridge must have programming
1842 * interface code of 0x01.
1843 */
1844 pci_read_irq(dev);
1845 dev->transparent = ((dev->class & 0xff) == 1);
1846 pci_read_bases(dev, 2, PCI_ROM_ADDRESS1);
1847 pci_read_bridge_windows(dev);
1848 set_pcie_hotplug_bridge(dev);
1849 pos = pci_find_capability(dev, PCI_CAP_ID_SSVID);
1850 if (pos) {
1851 pci_read_config_word(dev, pos + PCI_SSVID_VENDOR_ID, &dev->subsystem_vendor);
1852 pci_read_config_word(dev, pos + PCI_SSVID_DEVICE_ID, &dev->subsystem_device);
1853 }
1854 break;
1855
1856 case PCI_HEADER_TYPE_CARDBUS: /* CardBus bridge header */
1857 if (class != PCI_CLASS_BRIDGE_CARDBUS)
1858 goto bad;
1859 pci_read_irq(dev);
1860 pci_read_bases(dev, 1, 0);
1861 pci_read_config_word(dev, PCI_CB_SUBSYSTEM_VENDOR_ID, &dev->subsystem_vendor);
1862 pci_read_config_word(dev, PCI_CB_SUBSYSTEM_ID, &dev->subsystem_device);
1863 break;
1864
1865 default: /* unknown header */
1866 pci_err(dev, "unknown header type %02x, ignoring device\n",
1867 dev->hdr_type);
1868 return -EIO;
1869
1870 bad:
1871 pci_err(dev, "ignoring class %#08x (doesn't match header type %02x)\n",
1872 dev->class, dev->hdr_type);
1873 dev->class = PCI_CLASS_NOT_DEFINED << 8;
1874 }
1875
1876 /* We found a fine healthy device, go go go... */
1877 return 0;
1878}
1879
1880static void pci_configure_mps(struct pci_dev *dev)
1881{
1882 struct pci_dev *bridge = pci_upstream_bridge(dev);
1883 int mps, mpss, p_mps, rc;
1884
1885 if (!pci_is_pcie(dev) || !bridge || !pci_is_pcie(bridge))
1886 return;
1887
1888 /* MPS and MRRS fields are of type 'RsvdP' for VFs, short-circuit out */
1889 if (dev->is_virtfn)
1890 return;
1891
1892 mps = pcie_get_mps(dev);
1893 p_mps = pcie_get_mps(bridge);
1894
1895 if (mps == p_mps)
1896 return;
1897
1898 if (pcie_bus_config == PCIE_BUS_TUNE_OFF) {
1899 pci_warn(dev, "Max Payload Size %d, but upstream %s set to %d; if necessary, use \"pci=pcie_bus_safe\" and report a bug\n",
1900 mps, pci_name(bridge), p_mps);
1901 return;
1902 }
1903
1904 /*
1905 * Fancier MPS configuration is done later by
1906 * pcie_bus_configure_settings()
1907 */
1908 if (pcie_bus_config != PCIE_BUS_DEFAULT)
1909 return;
1910
1911 mpss = 128 << dev->pcie_mpss;
1912 if (mpss < p_mps && pci_pcie_type(bridge) == PCI_EXP_TYPE_ROOT_PORT) {
1913 pcie_set_mps(bridge, mpss);
1914 pci_info(dev, "Upstream bridge's Max Payload Size set to %d (was %d, max %d)\n",
1915 mpss, p_mps, 128 << bridge->pcie_mpss);
1916 p_mps = pcie_get_mps(bridge);
1917 }
1918
1919 rc = pcie_set_mps(dev, p_mps);
1920 if (rc) {
1921 pci_warn(dev, "can't set Max Payload Size to %d; if necessary, use \"pci=pcie_bus_safe\" and report a bug\n",
1922 p_mps);
1923 return;
1924 }
1925
1926 pci_info(dev, "Max Payload Size set to %d (was %d, max %d)\n",
1927 p_mps, mps, mpss);
1928}
1929
1930int pci_configure_extended_tags(struct pci_dev *dev, void *ign)
1931{
1932 struct pci_host_bridge *host;
1933 u32 cap;
1934 u16 ctl;
1935 int ret;
1936
1937 if (!pci_is_pcie(dev))
1938 return 0;
1939
1940 ret = pcie_capability_read_dword(dev, PCI_EXP_DEVCAP, &cap);
1941 if (ret)
1942 return 0;
1943
1944 if (!(cap & PCI_EXP_DEVCAP_EXT_TAG))
1945 return 0;
1946
1947 ret = pcie_capability_read_word(dev, PCI_EXP_DEVCTL, &ctl);
1948 if (ret)
1949 return 0;
1950
1951 host = pci_find_host_bridge(dev->bus);
1952 if (!host)
1953 return 0;
1954
1955 /*
1956 * If some device in the hierarchy doesn't handle Extended Tags
1957 * correctly, make sure they're disabled.
1958 */
1959 if (host->no_ext_tags) {
1960 if (ctl & PCI_EXP_DEVCTL_EXT_TAG) {
1961 pci_info(dev, "disabling Extended Tags\n");
1962 pcie_capability_clear_word(dev, PCI_EXP_DEVCTL,
1963 PCI_EXP_DEVCTL_EXT_TAG);
1964 }
1965 return 0;
1966 }
1967
1968 if (!(ctl & PCI_EXP_DEVCTL_EXT_TAG)) {
1969 pci_info(dev, "enabling Extended Tags\n");
1970 pcie_capability_set_word(dev, PCI_EXP_DEVCTL,
1971 PCI_EXP_DEVCTL_EXT_TAG);
1972 }
1973 return 0;
1974}
1975
1976/**
1977 * pcie_relaxed_ordering_enabled - Probe for PCIe relaxed ordering enable
1978 * @dev: PCI device to query
1979 *
1980 * Returns true if the device has enabled relaxed ordering attribute.
1981 */
1982bool pcie_relaxed_ordering_enabled(struct pci_dev *dev)
1983{
1984 u16 v;
1985
1986 pcie_capability_read_word(dev, PCI_EXP_DEVCTL, &v);
1987
1988 return !!(v & PCI_EXP_DEVCTL_RELAX_EN);
1989}
1990EXPORT_SYMBOL(pcie_relaxed_ordering_enabled);
1991
1992static void pci_configure_relaxed_ordering(struct pci_dev *dev)
1993{
1994 struct pci_dev *root;
1995
1996 /* PCI_EXP_DEVICE_RELAX_EN is RsvdP in VFs */
1997 if (dev->is_virtfn)
1998 return;
1999
2000 if (!pcie_relaxed_ordering_enabled(dev))
2001 return;
2002
2003 /*
2004 * For now, we only deal with Relaxed Ordering issues with Root
2005 * Ports. Peer-to-Peer DMA is another can of worms.
2006 */
2007 root = pci_find_pcie_root_port(dev);
2008 if (!root)
2009 return;
2010
2011 if (root->dev_flags & PCI_DEV_FLAGS_NO_RELAXED_ORDERING) {
2012 pcie_capability_clear_word(dev, PCI_EXP_DEVCTL,
2013 PCI_EXP_DEVCTL_RELAX_EN);
2014 pci_info(dev, "Relaxed Ordering disabled because the Root Port didn't support it\n");
2015 }
2016}
2017
2018static void pci_configure_ltr(struct pci_dev *dev)
2019{
2020#ifdef CONFIG_PCIEASPM
2021 struct pci_host_bridge *host = pci_find_host_bridge(dev->bus);
2022 struct pci_dev *bridge;
2023 u32 cap, ctl;
2024
2025 if (!pci_is_pcie(dev))
2026 return;
2027
2028 pcie_capability_read_dword(dev, PCI_EXP_DEVCAP2, &cap);
2029 if (!(cap & PCI_EXP_DEVCAP2_LTR))
2030 return;
2031
2032 pcie_capability_read_dword(dev, PCI_EXP_DEVCTL2, &ctl);
2033 if (ctl & PCI_EXP_DEVCTL2_LTR_EN) {
2034 if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT) {
2035 dev->ltr_path = 1;
2036 return;
2037 }
2038
2039 bridge = pci_upstream_bridge(dev);
2040 if (bridge && bridge->ltr_path)
2041 dev->ltr_path = 1;
2042
2043 return;
2044 }
2045
2046 if (!host->native_ltr)
2047 return;
2048
2049 /*
2050 * Software must not enable LTR in an Endpoint unless the Root
2051 * Complex and all intermediate Switches indicate support for LTR.
2052 * PCIe r4.0, sec 6.18.
2053 */
2054 if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT ||
2055 ((bridge = pci_upstream_bridge(dev)) &&
2056 bridge->ltr_path)) {
2057 pcie_capability_set_word(dev, PCI_EXP_DEVCTL2,
2058 PCI_EXP_DEVCTL2_LTR_EN);
2059 dev->ltr_path = 1;
2060 }
2061#endif
2062}
2063
2064static void pci_configure_eetlp_prefix(struct pci_dev *dev)
2065{
2066#ifdef CONFIG_PCI_PASID
2067 struct pci_dev *bridge;
2068 int pcie_type;
2069 u32 cap;
2070
2071 if (!pci_is_pcie(dev))
2072 return;
2073
2074 pcie_capability_read_dword(dev, PCI_EXP_DEVCAP2, &cap);
2075 if (!(cap & PCI_EXP_DEVCAP2_EE_PREFIX))
2076 return;
2077
2078 pcie_type = pci_pcie_type(dev);
2079 if (pcie_type == PCI_EXP_TYPE_ROOT_PORT ||
2080 pcie_type == PCI_EXP_TYPE_RC_END)
2081 dev->eetlp_prefix_path = 1;
2082 else {
2083 bridge = pci_upstream_bridge(dev);
2084 if (bridge && bridge->eetlp_prefix_path)
2085 dev->eetlp_prefix_path = 1;
2086 }
2087#endif
2088}
2089
2090static void pci_configure_serr(struct pci_dev *dev)
2091{
2092 u16 control;
2093
2094 if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
2095
2096 /*
2097 * A bridge will not forward ERR_ messages coming from an
2098 * endpoint unless SERR# forwarding is enabled.
2099 */
2100 pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &control);
2101 if (!(control & PCI_BRIDGE_CTL_SERR)) {
2102 control |= PCI_BRIDGE_CTL_SERR;
2103 pci_write_config_word(dev, PCI_BRIDGE_CONTROL, control);
2104 }
2105 }
2106}
2107
2108static void pci_configure_device(struct pci_dev *dev)
2109{
2110 pci_configure_mps(dev);
2111 pci_configure_extended_tags(dev, NULL);
2112 pci_configure_relaxed_ordering(dev);
2113 pci_configure_ltr(dev);
2114 pci_configure_eetlp_prefix(dev);
2115 pci_configure_serr(dev);
2116
2117 pci_acpi_program_hp_params(dev);
2118}
2119
2120static void pci_release_capabilities(struct pci_dev *dev)
2121{
2122 pci_aer_exit(dev);
2123 pci_vpd_release(dev);
2124 pci_iov_release(dev);
2125 pci_free_cap_save_buffers(dev);
2126}
2127
2128/**
2129 * pci_release_dev - Free a PCI device structure when all users of it are
2130 * finished
2131 * @dev: device that's been disconnected
2132 *
2133 * Will be called only by the device core when all users of this PCI device are
2134 * done.
2135 */
2136static void pci_release_dev(struct device *dev)
2137{
2138 struct pci_dev *pci_dev;
2139
2140 pci_dev = to_pci_dev(dev);
2141 pci_release_capabilities(pci_dev);
2142 pci_release_of_node(pci_dev);
2143 pcibios_release_device(pci_dev);
2144 pci_bus_put(pci_dev->bus);
2145 kfree(pci_dev->driver_override);
2146 bitmap_free(pci_dev->dma_alias_mask);
2147 kfree(pci_dev);
2148}
2149
2150struct pci_dev *pci_alloc_dev(struct pci_bus *bus)
2151{
2152 struct pci_dev *dev;
2153
2154 dev = kzalloc(sizeof(struct pci_dev), GFP_KERNEL);
2155 if (!dev)
2156 return NULL;
2157
2158 INIT_LIST_HEAD(&dev->bus_list);
2159 dev->dev.type = &pci_dev_type;
2160 dev->bus = pci_bus_get(bus);
2161
2162 return dev;
2163}
2164EXPORT_SYMBOL(pci_alloc_dev);
2165
2166static bool pci_bus_crs_vendor_id(u32 l)
2167{
2168 return (l & 0xffff) == 0x0001;
2169}
2170
2171static bool pci_bus_wait_crs(struct pci_bus *bus, int devfn, u32 *l,
2172 int timeout)
2173{
2174 int delay = 1;
2175
2176 if (!pci_bus_crs_vendor_id(*l))
2177 return true; /* not a CRS completion */
2178
2179 if (!timeout)
2180 return false; /* CRS, but caller doesn't want to wait */
2181
2182 /*
2183 * We got the reserved Vendor ID that indicates a completion with
2184 * Configuration Request Retry Status (CRS). Retry until we get a
2185 * valid Vendor ID or we time out.
2186 */
2187 while (pci_bus_crs_vendor_id(*l)) {
2188 if (delay > timeout) {
2189 pr_warn("pci %04x:%02x:%02x.%d: not ready after %dms; giving up\n",
2190 pci_domain_nr(bus), bus->number,
2191 PCI_SLOT(devfn), PCI_FUNC(devfn), delay - 1);
2192
2193 return false;
2194 }
2195 if (delay >= 1000)
2196 pr_info("pci %04x:%02x:%02x.%d: not ready after %dms; waiting\n",
2197 pci_domain_nr(bus), bus->number,
2198 PCI_SLOT(devfn), PCI_FUNC(devfn), delay - 1);
2199
2200 msleep(delay);
2201 delay *= 2;
2202
2203 if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, l))
2204 return false;
2205 }
2206
2207 if (delay >= 1000)
2208 pr_info("pci %04x:%02x:%02x.%d: ready after %dms\n",
2209 pci_domain_nr(bus), bus->number,
2210 PCI_SLOT(devfn), PCI_FUNC(devfn), delay - 1);
2211
2212 return true;
2213}
2214
2215bool pci_bus_generic_read_dev_vendor_id(struct pci_bus *bus, int devfn, u32 *l,
2216 int timeout)
2217{
2218 if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, l))
2219 return false;
2220
2221 /* Some broken boards return 0 or ~0 if a slot is empty: */
2222 if (*l == 0xffffffff || *l == 0x00000000 ||
2223 *l == 0x0000ffff || *l == 0xffff0000)
2224 return false;
2225
2226 if (pci_bus_crs_vendor_id(*l))
2227 return pci_bus_wait_crs(bus, devfn, l, timeout);
2228
2229 return true;
2230}
2231
2232bool pci_bus_read_dev_vendor_id(struct pci_bus *bus, int devfn, u32 *l,
2233 int timeout)
2234{
2235#ifdef CONFIG_PCI_QUIRKS
2236 struct pci_dev *bridge = bus->self;
2237
2238 /*
2239 * Certain IDT switches have an issue where they improperly trigger
2240 * ACS Source Validation errors on completions for config reads.
2241 */
2242 if (bridge && bridge->vendor == PCI_VENDOR_ID_IDT &&
2243 bridge->device == 0x80b5)
2244 return pci_idt_bus_quirk(bus, devfn, l, timeout);
2245#endif
2246
2247 return pci_bus_generic_read_dev_vendor_id(bus, devfn, l, timeout);
2248}
2249EXPORT_SYMBOL(pci_bus_read_dev_vendor_id);
2250
2251/*
2252 * Read the config data for a PCI device, sanity-check it,
2253 * and fill in the dev structure.
2254 */
2255static struct pci_dev *pci_scan_device(struct pci_bus *bus, int devfn)
2256{
2257 struct pci_dev *dev;
2258 u32 l;
2259
2260 if (!pci_bus_read_dev_vendor_id(bus, devfn, &l, 60*1000))
2261 return NULL;
2262
2263 dev = pci_alloc_dev(bus);
2264 if (!dev)
2265 return NULL;
2266
2267 dev->devfn = devfn;
2268 dev->vendor = l & 0xffff;
2269 dev->device = (l >> 16) & 0xffff;
2270
2271 pci_set_of_node(dev);
2272
2273 if (pci_setup_device(dev)) {
2274 pci_bus_put(dev->bus);
2275 kfree(dev);
2276 return NULL;
2277 }
2278
2279 return dev;
2280}
2281
2282void pcie_report_downtraining(struct pci_dev *dev)
2283{
2284 if (!pci_is_pcie(dev))
2285 return;
2286
2287 /* Look from the device up to avoid downstream ports with no devices */
2288 if ((pci_pcie_type(dev) != PCI_EXP_TYPE_ENDPOINT) &&
2289 (pci_pcie_type(dev) != PCI_EXP_TYPE_LEG_END) &&
2290 (pci_pcie_type(dev) != PCI_EXP_TYPE_UPSTREAM))
2291 return;
2292
2293 /* Multi-function PCIe devices share the same link/status */
2294 if (PCI_FUNC(dev->devfn) != 0 || dev->is_virtfn)
2295 return;
2296
2297 /* Print link status only if the device is constrained by the fabric */
2298 __pcie_print_link_status(dev, false);
2299}
2300
2301static void pci_init_capabilities(struct pci_dev *dev)
2302{
2303 /* Enhanced Allocation */
2304 pci_ea_init(dev);
2305
2306 /* Setup MSI caps & disable MSI/MSI-X interrupts */
2307 pci_msi_setup_pci_dev(dev);
2308
2309 /* Buffers for saving PCIe and PCI-X capabilities */
2310 pci_allocate_cap_save_buffers(dev);
2311
2312 /* Power Management */
2313 pci_pm_init(dev);
2314
2315 /* Vital Product Data */
2316 pci_vpd_init(dev);
2317
2318 /* Alternative Routing-ID Forwarding */
2319 pci_configure_ari(dev);
2320
2321 /* Single Root I/O Virtualization */
2322 pci_iov_init(dev);
2323
2324 /* Address Translation Services */
2325 pci_ats_init(dev);
2326
2327 /* Enable ACS P2P upstream forwarding */
2328 pci_enable_acs(dev);
2329
2330 /* Precision Time Measurement */
2331 pci_ptm_init(dev);
2332
2333 /* Advanced Error Reporting */
2334 pci_aer_init(dev);
2335
2336 pcie_report_downtraining(dev);
2337
2338 if (pci_probe_reset_function(dev) == 0)
2339 dev->reset_fn = 1;
2340}
2341
2342/*
2343 * This is the equivalent of pci_host_bridge_msi_domain() that acts on
2344 * devices. Firmware interfaces that can select the MSI domain on a
2345 * per-device basis should be called from here.
2346 */
2347static struct irq_domain *pci_dev_msi_domain(struct pci_dev *dev)
2348{
2349 struct irq_domain *d;
2350
2351 /*
2352 * If a domain has been set through the pcibios_add_device()
2353 * callback, then this is the one (platform code knows best).
2354 */
2355 d = dev_get_msi_domain(&dev->dev);
2356 if (d)
2357 return d;
2358
2359 /*
2360 * Let's see if we have a firmware interface able to provide
2361 * the domain.
2362 */
2363 d = pci_msi_get_device_domain(dev);
2364 if (d)
2365 return d;
2366
2367 return NULL;
2368}
2369
2370static void pci_set_msi_domain(struct pci_dev *dev)
2371{
2372 struct irq_domain *d;
2373
2374 /*
2375 * If the platform or firmware interfaces cannot supply a
2376 * device-specific MSI domain, then inherit the default domain
2377 * from the host bridge itself.
2378 */
2379 d = pci_dev_msi_domain(dev);
2380 if (!d)
2381 d = dev_get_msi_domain(&dev->bus->dev);
2382
2383 dev_set_msi_domain(&dev->dev, d);
2384}
2385
2386void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
2387{
2388 int ret;
2389
2390 pci_configure_device(dev);
2391
2392 device_initialize(&dev->dev);
2393 dev->dev.release = pci_release_dev;
2394
2395 set_dev_node(&dev->dev, pcibus_to_node(bus));
2396 dev->dev.dma_mask = &dev->dma_mask;
2397 dev->dev.dma_parms = &dev->dma_parms;
2398 dev->dev.coherent_dma_mask = 0xffffffffull;
2399
2400 dma_set_max_seg_size(&dev->dev, 65536);
2401 dma_set_seg_boundary(&dev->dev, 0xffffffff);
2402
2403 /* Fix up broken headers */
2404 pci_fixup_device(pci_fixup_header, dev);
2405
2406 /* Moved out from quirk header fixup code */
2407 pci_reassigndev_resource_alignment(dev);
2408
2409 /* Clear the state_saved flag */
2410 dev->state_saved = false;
2411
2412 /* Initialize various capabilities */
2413 pci_init_capabilities(dev);
2414
2415 /*
2416 * Add the device to our list of discovered devices
2417 * and the bus list for fixup functions, etc.
2418 */
2419 down_write(&pci_bus_sem);
2420 list_add_tail(&dev->bus_list, &bus->devices);
2421 up_write(&pci_bus_sem);
2422
2423 ret = pcibios_add_device(dev);
2424 WARN_ON(ret < 0);
2425
2426 /* Set up MSI IRQ domain */
2427 pci_set_msi_domain(dev);
2428
2429 /* Notifier could use PCI capabilities */
2430 dev->match_driver = false;
2431 ret = device_add(&dev->dev);
2432 WARN_ON(ret < 0);
2433}
2434
2435struct pci_dev *pci_scan_single_device(struct pci_bus *bus, int devfn)
2436{
2437 struct pci_dev *dev;
2438
2439 dev = pci_get_slot(bus, devfn);
2440 if (dev) {
2441 pci_dev_put(dev);
2442 return dev;
2443 }
2444
2445 dev = pci_scan_device(bus, devfn);
2446 if (!dev)
2447 return NULL;
2448
2449 pci_device_add(dev, bus);
2450
2451 return dev;
2452}
2453EXPORT_SYMBOL(pci_scan_single_device);
2454
2455static unsigned next_fn(struct pci_bus *bus, struct pci_dev *dev, unsigned fn)
2456{
2457 int pos;
2458 u16 cap = 0;
2459 unsigned next_fn;
2460
2461 if (pci_ari_enabled(bus)) {
2462 if (!dev)
2463 return 0;
2464 pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ARI);
2465 if (!pos)
2466 return 0;
2467
2468 pci_read_config_word(dev, pos + PCI_ARI_CAP, &cap);
2469 next_fn = PCI_ARI_CAP_NFN(cap);
2470 if (next_fn <= fn)
2471 return 0; /* protect against malformed list */
2472
2473 return next_fn;
2474 }
2475
2476 /* dev may be NULL for non-contiguous multifunction devices */
2477 if (!dev || dev->multifunction)
2478 return (fn + 1) % 8;
2479
2480 return 0;
2481}
2482
2483static int only_one_child(struct pci_bus *bus)
2484{
2485 struct pci_dev *bridge = bus->self;
2486
2487 /*
2488 * Systems with unusual topologies set PCI_SCAN_ALL_PCIE_DEVS so
2489 * we scan for all possible devices, not just Device 0.
2490 */
2491 if (pci_has_flag(PCI_SCAN_ALL_PCIE_DEVS))
2492 return 0;
2493
2494 /*
2495 * A PCIe Downstream Port normally leads to a Link with only Device
2496 * 0 on it (PCIe spec r3.1, sec 7.3.1). As an optimization, scan
2497 * only for Device 0 in that situation.
2498 */
2499 if (bridge && pci_is_pcie(bridge) && pcie_downstream_port(bridge))
2500 return 1;
2501
2502 return 0;
2503}
2504
2505/**
2506 * pci_scan_slot - Scan a PCI slot on a bus for devices
2507 * @bus: PCI bus to scan
2508 * @devfn: slot number to scan (must have zero function)
2509 *
2510 * Scan a PCI slot on the specified PCI bus for devices, adding
2511 * discovered devices to the @bus->devices list. New devices
2512 * will not have is_added set.
2513 *
2514 * Returns the number of new devices found.
2515 */
2516int pci_scan_slot(struct pci_bus *bus, int devfn)
2517{
2518 unsigned fn, nr = 0;
2519 struct pci_dev *dev;
2520
2521 if (only_one_child(bus) && (devfn > 0))
2522 return 0; /* Already scanned the entire slot */
2523
2524 dev = pci_scan_single_device(bus, devfn);
2525 if (!dev)
2526 return 0;
2527 if (!pci_dev_is_added(dev))
2528 nr++;
2529
2530 for (fn = next_fn(bus, dev, 0); fn > 0; fn = next_fn(bus, dev, fn)) {
2531 dev = pci_scan_single_device(bus, devfn + fn);
2532 if (dev) {
2533 if (!pci_dev_is_added(dev))
2534 nr++;
2535 dev->multifunction = 1;
2536 }
2537 }
2538
2539 /* Only one slot has PCIe device */
2540 if (bus->self && nr)
2541 pcie_aspm_init_link_state(bus->self);
2542
2543 return nr;
2544}
2545EXPORT_SYMBOL(pci_scan_slot);
2546
2547static int pcie_find_smpss(struct pci_dev *dev, void *data)
2548{
2549 u8 *smpss = data;
2550
2551 if (!pci_is_pcie(dev))
2552 return 0;
2553
2554 /*
2555 * We don't have a way to change MPS settings on devices that have
2556 * drivers attached. A hot-added device might support only the minimum
2557 * MPS setting (MPS=128). Therefore, if the fabric contains a bridge
2558 * where devices may be hot-added, we limit the fabric MPS to 128 so
2559 * hot-added devices will work correctly.
2560 *
2561 * However, if we hot-add a device to a slot directly below a Root
2562 * Port, it's impossible for there to be other existing devices below
2563 * the port. We don't limit the MPS in this case because we can
2564 * reconfigure MPS on both the Root Port and the hot-added device,
2565 * and there are no other devices involved.
2566 *
2567 * Note that this PCIE_BUS_SAFE path assumes no peer-to-peer DMA.
2568 */
2569 if (dev->is_hotplug_bridge &&
2570 pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT)
2571 *smpss = 0;
2572
2573 if (*smpss > dev->pcie_mpss)
2574 *smpss = dev->pcie_mpss;
2575
2576 return 0;
2577}
2578
2579static void pcie_write_mps(struct pci_dev *dev, int mps)
2580{
2581 int rc;
2582
2583 if (pcie_bus_config == PCIE_BUS_PERFORMANCE) {
2584 mps = 128 << dev->pcie_mpss;
2585
2586 if (pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT &&
2587 dev->bus->self)
2588
2589 /*
2590 * For "Performance", the assumption is made that
2591 * downstream communication will never be larger than
2592 * the MRRS. So, the MPS only needs to be configured
2593 * for the upstream communication. This being the case,
2594 * walk from the top down and set the MPS of the child
2595 * to that of the parent bus.
2596 *
2597 * Configure the device MPS with the smaller of the
2598 * device MPSS or the bridge MPS (which is assumed to be
2599 * properly configured at this point to the largest
2600 * allowable MPS based on its parent bus).
2601 */
2602 mps = min(mps, pcie_get_mps(dev->bus->self));
2603 }
2604
2605 rc = pcie_set_mps(dev, mps);
2606 if (rc)
2607 pci_err(dev, "Failed attempting to set the MPS\n");
2608}
2609
2610static void pcie_write_mrrs(struct pci_dev *dev)
2611{
2612 int rc, mrrs;
2613
2614 /*
2615 * In the "safe" case, do not configure the MRRS. There appear to be
2616 * issues with setting MRRS to 0 on a number of devices.
2617 */
2618 if (pcie_bus_config != PCIE_BUS_PERFORMANCE)
2619 return;
2620
2621 /*
2622 * For max performance, the MRRS must be set to the largest supported
2623 * value. However, it cannot be configured larger than the MPS the
2624 * device or the bus can support. This should already be properly
2625 * configured by a prior call to pcie_write_mps().
2626 */
2627 mrrs = pcie_get_mps(dev);
2628
2629 /*
2630 * MRRS is a R/W register. Invalid values can be written, but a
2631 * subsequent read will verify if the value is acceptable or not.
2632 * If the MRRS value provided is not acceptable (e.g., too large),
2633 * shrink the value until it is acceptable to the HW.
2634 */
2635 while (mrrs != pcie_get_readrq(dev) && mrrs >= 128) {
2636 rc = pcie_set_readrq(dev, mrrs);
2637 if (!rc)
2638 break;
2639
2640 pci_warn(dev, "Failed attempting to set the MRRS\n");
2641 mrrs /= 2;
2642 }
2643
2644 if (mrrs < 128)
2645 pci_err(dev, "MRRS was unable to be configured with a safe value. If problems are experienced, try running with pci=pcie_bus_safe\n");
2646}
2647
2648static int pcie_bus_configure_set(struct pci_dev *dev, void *data)
2649{
2650 int mps, orig_mps;
2651
2652 if (!pci_is_pcie(dev))
2653 return 0;
2654
2655 if (pcie_bus_config == PCIE_BUS_TUNE_OFF ||
2656 pcie_bus_config == PCIE_BUS_DEFAULT)
2657 return 0;
2658
2659 mps = 128 << *(u8 *)data;
2660 orig_mps = pcie_get_mps(dev);
2661
2662 pcie_write_mps(dev, mps);
2663 pcie_write_mrrs(dev);
2664
2665 pci_info(dev, "Max Payload Size set to %4d/%4d (was %4d), Max Read Rq %4d\n",
2666 pcie_get_mps(dev), 128 << dev->pcie_mpss,
2667 orig_mps, pcie_get_readrq(dev));
2668
2669 return 0;
2670}
2671
2672/*
2673 * pcie_bus_configure_settings() requires that pci_walk_bus work in a top-down,
2674 * parents then children fashion. If this changes, then this code will not
2675 * work as designed.
2676 */
2677void pcie_bus_configure_settings(struct pci_bus *bus)
2678{
2679 u8 smpss = 0;
2680
2681 if (!bus->self)
2682 return;
2683
2684 if (!pci_is_pcie(bus->self))
2685 return;
2686
2687 /*
2688 * FIXME - Peer to peer DMA is possible, though the endpoint would need
2689 * to be aware of the MPS of the destination. To work around this,
2690 * simply force the MPS of the entire system to the smallest possible.
2691 */
2692 if (pcie_bus_config == PCIE_BUS_PEER2PEER)
2693 smpss = 0;
2694
2695 if (pcie_bus_config == PCIE_BUS_SAFE) {
2696 smpss = bus->self->pcie_mpss;
2697
2698 pcie_find_smpss(bus->self, &smpss);
2699 pci_walk_bus(bus, pcie_find_smpss, &smpss);
2700 }
2701
2702 pcie_bus_configure_set(bus->self, &smpss);
2703 pci_walk_bus(bus, pcie_bus_configure_set, &smpss);
2704}
2705EXPORT_SYMBOL_GPL(pcie_bus_configure_settings);
2706
2707/*
2708 * Called after each bus is probed, but before its children are examined. This
2709 * is marked as __weak because multiple architectures define it.
2710 */
2711void __weak pcibios_fixup_bus(struct pci_bus *bus)
2712{
2713 /* nothing to do, expected to be removed in the future */
2714}
2715
2716/**
2717 * pci_scan_child_bus_extend() - Scan devices below a bus
2718 * @bus: Bus to scan for devices
2719 * @available_buses: Total number of buses available (%0 does not try to
2720 * extend beyond the minimal)
2721 *
2722 * Scans devices below @bus including subordinate buses. Returns new
2723 * subordinate number including all the found devices. Passing
2724 * @available_buses causes the remaining bus space to be distributed
2725 * equally between hotplug-capable bridges to allow future extension of the
2726 * hierarchy.
2727 */
2728static unsigned int pci_scan_child_bus_extend(struct pci_bus *bus,
2729 unsigned int available_buses)
2730{
2731 unsigned int used_buses, normal_bridges = 0, hotplug_bridges = 0;
2732 unsigned int start = bus->busn_res.start;
2733 unsigned int devfn, fn, cmax, max = start;
2734 struct pci_dev *dev;
2735 int nr_devs;
2736
2737 dev_dbg(&bus->dev, "scanning bus\n");
2738
2739 /* Go find them, Rover! */
2740 for (devfn = 0; devfn < 256; devfn += 8) {
2741 nr_devs = pci_scan_slot(bus, devfn);
2742
2743 /*
2744 * The Jailhouse hypervisor may pass individual functions of a
2745 * multi-function device to a guest without passing function 0.
2746 * Look for them as well.
2747 */
2748 if (jailhouse_paravirt() && nr_devs == 0) {
2749 for (fn = 1; fn < 8; fn++) {
2750 dev = pci_scan_single_device(bus, devfn + fn);
2751 if (dev)
2752 dev->multifunction = 1;
2753 }
2754 }
2755 }
2756
2757 /* Reserve buses for SR-IOV capability */
2758 used_buses = pci_iov_bus_range(bus);
2759 max += used_buses;
2760
2761 /*
2762 * After performing arch-dependent fixup of the bus, look behind
2763 * all PCI-to-PCI bridges on this bus.
2764 */
2765 if (!bus->is_added) {
2766 dev_dbg(&bus->dev, "fixups for bus\n");
2767 pcibios_fixup_bus(bus);
2768 bus->is_added = 1;
2769 }
2770
2771 /*
2772 * Calculate how many hotplug bridges and normal bridges there
2773 * are on this bus. We will distribute the additional available
2774 * buses between hotplug bridges.
2775 */
2776 for_each_pci_bridge(dev, bus) {
2777 if (dev->is_hotplug_bridge)
2778 hotplug_bridges++;
2779 else
2780 normal_bridges++;
2781 }
2782
2783 /*
2784 * Scan bridges that are already configured. We don't touch them
2785 * unless they are misconfigured (which will be done in the second
2786 * scan below).
2787 */
2788 for_each_pci_bridge(dev, bus) {
2789 cmax = max;
2790 max = pci_scan_bridge_extend(bus, dev, max, 0, 0);
2791
2792 /*
2793 * Reserve one bus for each bridge now to avoid extending
2794 * hotplug bridges too much during the second scan below.
2795 */
2796 used_buses++;
2797 if (cmax - max > 1)
2798 used_buses += cmax - max - 1;
2799 }
2800
2801 /* Scan bridges that need to be reconfigured */
2802 for_each_pci_bridge(dev, bus) {
2803 unsigned int buses = 0;
2804
2805 if (!hotplug_bridges && normal_bridges == 1) {
2806
2807 /*
2808 * There is only one bridge on the bus (upstream
2809 * port) so it gets all available buses which it
2810 * can then distribute to the possible hotplug
2811 * bridges below.
2812 */
2813 buses = available_buses;
2814 } else if (dev->is_hotplug_bridge) {
2815
2816 /*
2817 * Distribute the extra buses between hotplug
2818 * bridges if any.
2819 */
2820 buses = available_buses / hotplug_bridges;
2821 buses = min(buses, available_buses - used_buses + 1);
2822 }
2823
2824 cmax = max;
2825 max = pci_scan_bridge_extend(bus, dev, cmax, buses, 1);
2826 /* One bus is already accounted so don't add it again */
2827 if (max - cmax > 1)
2828 used_buses += max - cmax - 1;
2829 }
2830
2831 /*
2832 * Make sure a hotplug bridge has at least the minimum requested
2833 * number of buses but allow it to grow up to the maximum available
2834 * bus number of there is room.
2835 */
2836 if (bus->self && bus->self->is_hotplug_bridge) {
2837 used_buses = max_t(unsigned int, available_buses,
2838 pci_hotplug_bus_size - 1);
2839 if (max - start < used_buses) {
2840 max = start + used_buses;
2841
2842 /* Do not allocate more buses than we have room left */
2843 if (max > bus->busn_res.end)
2844 max = bus->busn_res.end;
2845
2846 dev_dbg(&bus->dev, "%pR extended by %#02x\n",
2847 &bus->busn_res, max - start);
2848 }
2849 }
2850
2851 /*
2852 * We've scanned the bus and so we know all about what's on
2853 * the other side of any bridges that may be on this bus plus
2854 * any devices.
2855 *
2856 * Return how far we've got finding sub-buses.
2857 */
2858 dev_dbg(&bus->dev, "bus scan returning with max=%02x\n", max);
2859 return max;
2860}
2861
2862/**
2863 * pci_scan_child_bus() - Scan devices below a bus
2864 * @bus: Bus to scan for devices
2865 *
2866 * Scans devices below @bus including subordinate buses. Returns new
2867 * subordinate number including all the found devices.
2868 */
2869unsigned int pci_scan_child_bus(struct pci_bus *bus)
2870{
2871 return pci_scan_child_bus_extend(bus, 0);
2872}
2873EXPORT_SYMBOL_GPL(pci_scan_child_bus);
2874
2875/**
2876 * pcibios_root_bridge_prepare - Platform-specific host bridge setup
2877 * @bridge: Host bridge to set up
2878 *
2879 * Default empty implementation. Replace with an architecture-specific setup
2880 * routine, if necessary.
2881 */
2882int __weak pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
2883{
2884 return 0;
2885}
2886
2887void __weak pcibios_add_bus(struct pci_bus *bus)
2888{
2889}
2890
2891void __weak pcibios_remove_bus(struct pci_bus *bus)
2892{
2893}
2894
2895struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
2896 struct pci_ops *ops, void *sysdata, struct list_head *resources)
2897{
2898 int error;
2899 struct pci_host_bridge *bridge;
2900
2901 bridge = pci_alloc_host_bridge(0);
2902 if (!bridge)
2903 return NULL;
2904
2905 bridge->dev.parent = parent;
2906
2907 list_splice_init(resources, &bridge->windows);
2908 bridge->sysdata = sysdata;
2909 bridge->busnr = bus;
2910 bridge->ops = ops;
2911
2912 error = pci_register_host_bridge(bridge);
2913 if (error < 0)
2914 goto err_out;
2915
2916 return bridge->bus;
2917
2918err_out:
2919 kfree(bridge);
2920 return NULL;
2921}
2922EXPORT_SYMBOL_GPL(pci_create_root_bus);
2923
2924int pci_host_probe(struct pci_host_bridge *bridge)
2925{
2926 struct pci_bus *bus, *child;
2927 int ret;
2928
2929 ret = pci_scan_root_bus_bridge(bridge);
2930 if (ret < 0) {
2931 dev_err(bridge->dev.parent, "Scanning root bridge failed");
2932 return ret;
2933 }
2934
2935 bus = bridge->bus;
2936
2937 /*
2938 * We insert PCI resources into the iomem_resource and
2939 * ioport_resource trees in either pci_bus_claim_resources()
2940 * or pci_bus_assign_resources().
2941 */
2942 if (pci_has_flag(PCI_PROBE_ONLY)) {
2943 pci_bus_claim_resources(bus);
2944 } else {
2945 pci_bus_size_bridges(bus);
2946 pci_bus_assign_resources(bus);
2947
2948 list_for_each_entry(child, &bus->children, node)
2949 pcie_bus_configure_settings(child);
2950 }
2951
2952 pci_bus_add_devices(bus);
2953 return 0;
2954}
2955EXPORT_SYMBOL_GPL(pci_host_probe);
2956
2957int pci_bus_insert_busn_res(struct pci_bus *b, int bus, int bus_max)
2958{
2959 struct resource *res = &b->busn_res;
2960 struct resource *parent_res, *conflict;
2961
2962 res->start = bus;
2963 res->end = bus_max;
2964 res->flags = IORESOURCE_BUS;
2965
2966 if (!pci_is_root_bus(b))
2967 parent_res = &b->parent->busn_res;
2968 else {
2969 parent_res = get_pci_domain_busn_res(pci_domain_nr(b));
2970 res->flags |= IORESOURCE_PCI_FIXED;
2971 }
2972
2973 conflict = request_resource_conflict(parent_res, res);
2974
2975 if (conflict)
2976 dev_info(&b->dev,
2977 "busn_res: can not insert %pR under %s%pR (conflicts with %s %pR)\n",
2978 res, pci_is_root_bus(b) ? "domain " : "",
2979 parent_res, conflict->name, conflict);
2980
2981 return conflict == NULL;
2982}
2983
2984int pci_bus_update_busn_res_end(struct pci_bus *b, int bus_max)
2985{
2986 struct resource *res = &b->busn_res;
2987 struct resource old_res = *res;
2988 resource_size_t size;
2989 int ret;
2990
2991 if (res->start > bus_max)
2992 return -EINVAL;
2993
2994 size = bus_max - res->start + 1;
2995 ret = adjust_resource(res, res->start, size);
2996 dev_info(&b->dev, "busn_res: %pR end %s updated to %02x\n",
2997 &old_res, ret ? "can not be" : "is", bus_max);
2998
2999 if (!ret && !res->parent)
3000 pci_bus_insert_busn_res(b, res->start, res->end);
3001
3002 return ret;
3003}
3004
3005void pci_bus_release_busn_res(struct pci_bus *b)
3006{
3007 struct resource *res = &b->busn_res;
3008 int ret;
3009
3010 if (!res->flags || !res->parent)
3011 return;
3012
3013 ret = release_resource(res);
3014 dev_info(&b->dev, "busn_res: %pR %s released\n",
3015 res, ret ? "can not be" : "is");
3016}
3017
3018int pci_scan_root_bus_bridge(struct pci_host_bridge *bridge)
3019{
3020 struct resource_entry *window;
3021 bool found = false;
3022 struct pci_bus *b;
3023 int max, bus, ret;
3024
3025 if (!bridge)
3026 return -EINVAL;
3027
3028 resource_list_for_each_entry(window, &bridge->windows)
3029 if (window->res->flags & IORESOURCE_BUS) {
3030 found = true;
3031 break;
3032 }
3033
3034 ret = pci_register_host_bridge(bridge);
3035 if (ret < 0)
3036 return ret;
3037
3038 b = bridge->bus;
3039 bus = bridge->busnr;
3040
3041 if (!found) {
3042 dev_info(&b->dev,
3043 "No busn resource found for root bus, will use [bus %02x-ff]\n",
3044 bus);
3045 pci_bus_insert_busn_res(b, bus, 255);
3046 }
3047
3048 max = pci_scan_child_bus(b);
3049
3050 if (!found)
3051 pci_bus_update_busn_res_end(b, max);
3052
3053 return 0;
3054}
3055EXPORT_SYMBOL(pci_scan_root_bus_bridge);
3056
3057struct pci_bus *pci_scan_root_bus(struct device *parent, int bus,
3058 struct pci_ops *ops, void *sysdata, struct list_head *resources)
3059{
3060 struct resource_entry *window;
3061 bool found = false;
3062 struct pci_bus *b;
3063 int max;
3064
3065 resource_list_for_each_entry(window, resources)
3066 if (window->res->flags & IORESOURCE_BUS) {
3067 found = true;
3068 break;
3069 }
3070
3071 b = pci_create_root_bus(parent, bus, ops, sysdata, resources);
3072 if (!b)
3073 return NULL;
3074
3075 if (!found) {
3076 dev_info(&b->dev,
3077 "No busn resource found for root bus, will use [bus %02x-ff]\n",
3078 bus);
3079 pci_bus_insert_busn_res(b, bus, 255);
3080 }
3081
3082 max = pci_scan_child_bus(b);
3083
3084 if (!found)
3085 pci_bus_update_busn_res_end(b, max);
3086
3087 return b;
3088}
3089EXPORT_SYMBOL(pci_scan_root_bus);
3090
3091struct pci_bus *pci_scan_bus(int bus, struct pci_ops *ops,
3092 void *sysdata)
3093{
3094 LIST_HEAD(resources);
3095 struct pci_bus *b;
3096
3097 pci_add_resource(&resources, &ioport_resource);
3098 pci_add_resource(&resources, &iomem_resource);
3099 pci_add_resource(&resources, &busn_resource);
3100 b = pci_create_root_bus(NULL, bus, ops, sysdata, &resources);
3101 if (b) {
3102 pci_scan_child_bus(b);
3103 } else {
3104 pci_free_resource_list(&resources);
3105 }
3106 return b;
3107}
3108EXPORT_SYMBOL(pci_scan_bus);
3109
3110/**
3111 * pci_rescan_bus_bridge_resize - Scan a PCI bus for devices
3112 * @bridge: PCI bridge for the bus to scan
3113 *
3114 * Scan a PCI bus and child buses for new devices, add them,
3115 * and enable them, resizing bridge mmio/io resource if necessary
3116 * and possible. The caller must ensure the child devices are already
3117 * removed for resizing to occur.
3118 *
3119 * Returns the max number of subordinate bus discovered.
3120 */
3121unsigned int pci_rescan_bus_bridge_resize(struct pci_dev *bridge)
3122{
3123 unsigned int max;
3124 struct pci_bus *bus = bridge->subordinate;
3125
3126 max = pci_scan_child_bus(bus);
3127
3128 pci_assign_unassigned_bridge_resources(bridge);
3129
3130 pci_bus_add_devices(bus);
3131
3132 return max;
3133}
3134
3135/**
3136 * pci_rescan_bus - Scan a PCI bus for devices
3137 * @bus: PCI bus to scan
3138 *
3139 * Scan a PCI bus and child buses for new devices, add them,
3140 * and enable them.
3141 *
3142 * Returns the max number of subordinate bus discovered.
3143 */
3144unsigned int pci_rescan_bus(struct pci_bus *bus)
3145{
3146 unsigned int max;
3147
3148 max = pci_scan_child_bus(bus);
3149 pci_assign_unassigned_bus_resources(bus);
3150 pci_bus_add_devices(bus);
3151
3152 return max;
3153}
3154EXPORT_SYMBOL_GPL(pci_rescan_bus);
3155
3156/*
3157 * pci_rescan_bus(), pci_rescan_bus_bridge_resize() and PCI device removal
3158 * routines should always be executed under this mutex.
3159 */
3160static DEFINE_MUTEX(pci_rescan_remove_lock);
3161
3162void pci_lock_rescan_remove(void)
3163{
3164 mutex_lock(&pci_rescan_remove_lock);
3165}
3166EXPORT_SYMBOL_GPL(pci_lock_rescan_remove);
3167
3168void pci_unlock_rescan_remove(void)
3169{
3170 mutex_unlock(&pci_rescan_remove_lock);
3171}
3172EXPORT_SYMBOL_GPL(pci_unlock_rescan_remove);
3173
3174static int __init pci_sort_bf_cmp(const struct device *d_a,
3175 const struct device *d_b)
3176{
3177 const struct pci_dev *a = to_pci_dev(d_a);
3178 const struct pci_dev *b = to_pci_dev(d_b);
3179
3180 if (pci_domain_nr(a->bus) < pci_domain_nr(b->bus)) return -1;
3181 else if (pci_domain_nr(a->bus) > pci_domain_nr(b->bus)) return 1;
3182
3183 if (a->bus->number < b->bus->number) return -1;
3184 else if (a->bus->number > b->bus->number) return 1;
3185
3186 if (a->devfn < b->devfn) return -1;
3187 else if (a->devfn > b->devfn) return 1;
3188
3189 return 0;
3190}
3191
3192void __init pci_sort_breadthfirst(void)
3193{
3194 bus_sort_breadthfirst(&pci_bus_type, &pci_sort_bf_cmp);
3195}
3196
3197int pci_hp_add_bridge(struct pci_dev *dev)
3198{
3199 struct pci_bus *parent = dev->bus;
3200 int busnr, start = parent->busn_res.start;
3201 unsigned int available_buses = 0;
3202 int end = parent->busn_res.end;
3203
3204 for (busnr = start; busnr <= end; busnr++) {
3205 if (!pci_find_bus(pci_domain_nr(parent), busnr))
3206 break;
3207 }
3208 if (busnr-- > end) {
3209 pci_err(dev, "No bus number available for hot-added bridge\n");
3210 return -1;
3211 }
3212
3213 /* Scan bridges that are already configured */
3214 busnr = pci_scan_bridge(parent, dev, busnr, 0);
3215
3216 /*
3217 * Distribute the available bus numbers between hotplug-capable
3218 * bridges to make extending the chain later possible.
3219 */
3220 available_buses = end - busnr;
3221
3222 /* Scan bridges that need to be reconfigured */
3223 pci_scan_bridge_extend(parent, dev, busnr, available_buses, 1);
3224
3225 if (!dev->subordinate)
3226 return -1;
3227
3228 return 0;
3229}
3230EXPORT_SYMBOL_GPL(pci_hp_add_bridge);
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * PCI detection and setup code
4 */
5
6#include <linux/kernel.h>
7#include <linux/delay.h>
8#include <linux/init.h>
9#include <linux/pci.h>
10#include <linux/msi.h>
11#include <linux/of_pci.h>
12#include <linux/pci_hotplug.h>
13#include <linux/slab.h>
14#include <linux/module.h>
15#include <linux/cpumask.h>
16#include <linux/aer.h>
17#include <linux/acpi.h>
18#include <linux/hypervisor.h>
19#include <linux/irqdomain.h>
20#include <linux/pm_runtime.h>
21#include <linux/bitfield.h>
22#include "pci.h"
23
24#define CARDBUS_LATENCY_TIMER 176 /* secondary latency timer */
25#define CARDBUS_RESERVE_BUSNR 3
26
27static struct resource busn_resource = {
28 .name = "PCI busn",
29 .start = 0,
30 .end = 255,
31 .flags = IORESOURCE_BUS,
32};
33
34/* Ugh. Need to stop exporting this to modules. */
35LIST_HEAD(pci_root_buses);
36EXPORT_SYMBOL(pci_root_buses);
37
38static LIST_HEAD(pci_domain_busn_res_list);
39
40struct pci_domain_busn_res {
41 struct list_head list;
42 struct resource res;
43 int domain_nr;
44};
45
46static struct resource *get_pci_domain_busn_res(int domain_nr)
47{
48 struct pci_domain_busn_res *r;
49
50 list_for_each_entry(r, &pci_domain_busn_res_list, list)
51 if (r->domain_nr == domain_nr)
52 return &r->res;
53
54 r = kzalloc(sizeof(*r), GFP_KERNEL);
55 if (!r)
56 return NULL;
57
58 r->domain_nr = domain_nr;
59 r->res.start = 0;
60 r->res.end = 0xff;
61 r->res.flags = IORESOURCE_BUS | IORESOURCE_PCI_FIXED;
62
63 list_add_tail(&r->list, &pci_domain_busn_res_list);
64
65 return &r->res;
66}
67
68/*
69 * Some device drivers need know if PCI is initiated.
70 * Basically, we think PCI is not initiated when there
71 * is no device to be found on the pci_bus_type.
72 */
73int no_pci_devices(void)
74{
75 struct device *dev;
76 int no_devices;
77
78 dev = bus_find_next_device(&pci_bus_type, NULL);
79 no_devices = (dev == NULL);
80 put_device(dev);
81 return no_devices;
82}
83EXPORT_SYMBOL(no_pci_devices);
84
85/*
86 * PCI Bus Class
87 */
88static void release_pcibus_dev(struct device *dev)
89{
90 struct pci_bus *pci_bus = to_pci_bus(dev);
91
92 put_device(pci_bus->bridge);
93 pci_bus_remove_resources(pci_bus);
94 pci_release_bus_of_node(pci_bus);
95 kfree(pci_bus);
96}
97
98static const struct class pcibus_class = {
99 .name = "pci_bus",
100 .dev_release = &release_pcibus_dev,
101 .dev_groups = pcibus_groups,
102};
103
104static int __init pcibus_class_init(void)
105{
106 return class_register(&pcibus_class);
107}
108postcore_initcall(pcibus_class_init);
109
110static u64 pci_size(u64 base, u64 maxbase, u64 mask)
111{
112 u64 size = mask & maxbase; /* Find the significant bits */
113 if (!size)
114 return 0;
115
116 /*
117 * Get the lowest of them to find the decode size, and from that
118 * the extent.
119 */
120 size = size & ~(size-1);
121
122 /*
123 * base == maxbase can be valid only if the BAR has already been
124 * programmed with all 1s.
125 */
126 if (base == maxbase && ((base | (size - 1)) & mask) != mask)
127 return 0;
128
129 return size;
130}
131
132static inline unsigned long decode_bar(struct pci_dev *dev, u32 bar)
133{
134 u32 mem_type;
135 unsigned long flags;
136
137 if ((bar & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_IO) {
138 flags = bar & ~PCI_BASE_ADDRESS_IO_MASK;
139 flags |= IORESOURCE_IO;
140 return flags;
141 }
142
143 flags = bar & ~PCI_BASE_ADDRESS_MEM_MASK;
144 flags |= IORESOURCE_MEM;
145 if (flags & PCI_BASE_ADDRESS_MEM_PREFETCH)
146 flags |= IORESOURCE_PREFETCH;
147
148 mem_type = bar & PCI_BASE_ADDRESS_MEM_TYPE_MASK;
149 switch (mem_type) {
150 case PCI_BASE_ADDRESS_MEM_TYPE_32:
151 break;
152 case PCI_BASE_ADDRESS_MEM_TYPE_1M:
153 /* 1M mem BAR treated as 32-bit BAR */
154 break;
155 case PCI_BASE_ADDRESS_MEM_TYPE_64:
156 flags |= IORESOURCE_MEM_64;
157 break;
158 default:
159 /* mem unknown type treated as 32-bit BAR */
160 break;
161 }
162 return flags;
163}
164
165#define PCI_COMMAND_DECODE_ENABLE (PCI_COMMAND_MEMORY | PCI_COMMAND_IO)
166
167/**
168 * __pci_read_base - Read a PCI BAR
169 * @dev: the PCI device
170 * @type: type of the BAR
171 * @res: resource buffer to be filled in
172 * @pos: BAR position in the config space
173 *
174 * Returns 1 if the BAR is 64-bit, or 0 if 32-bit.
175 */
176int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
177 struct resource *res, unsigned int pos)
178{
179 u32 l = 0, sz = 0, mask;
180 u64 l64, sz64, mask64;
181 u16 orig_cmd;
182 struct pci_bus_region region, inverted_region;
183 const char *res_name = pci_resource_name(dev, res - dev->resource);
184
185 mask = type ? PCI_ROM_ADDRESS_MASK : ~0;
186
187 /* No printks while decoding is disabled! */
188 if (!dev->mmio_always_on) {
189 pci_read_config_word(dev, PCI_COMMAND, &orig_cmd);
190 if (orig_cmd & PCI_COMMAND_DECODE_ENABLE) {
191 pci_write_config_word(dev, PCI_COMMAND,
192 orig_cmd & ~PCI_COMMAND_DECODE_ENABLE);
193 }
194 }
195
196 res->name = pci_name(dev);
197
198 pci_read_config_dword(dev, pos, &l);
199 pci_write_config_dword(dev, pos, l | mask);
200 pci_read_config_dword(dev, pos, &sz);
201 pci_write_config_dword(dev, pos, l);
202
203 /*
204 * All bits set in sz means the device isn't working properly.
205 * If the BAR isn't implemented, all bits must be 0. If it's a
206 * memory BAR or a ROM, bit 0 must be clear; if it's an io BAR, bit
207 * 1 must be clear.
208 */
209 if (PCI_POSSIBLE_ERROR(sz))
210 sz = 0;
211
212 /*
213 * I don't know how l can have all bits set. Copied from old code.
214 * Maybe it fixes a bug on some ancient platform.
215 */
216 if (PCI_POSSIBLE_ERROR(l))
217 l = 0;
218
219 if (type == pci_bar_unknown) {
220 res->flags = decode_bar(dev, l);
221 res->flags |= IORESOURCE_SIZEALIGN;
222 if (res->flags & IORESOURCE_IO) {
223 l64 = l & PCI_BASE_ADDRESS_IO_MASK;
224 sz64 = sz & PCI_BASE_ADDRESS_IO_MASK;
225 mask64 = PCI_BASE_ADDRESS_IO_MASK & (u32)IO_SPACE_LIMIT;
226 } else {
227 l64 = l & PCI_BASE_ADDRESS_MEM_MASK;
228 sz64 = sz & PCI_BASE_ADDRESS_MEM_MASK;
229 mask64 = (u32)PCI_BASE_ADDRESS_MEM_MASK;
230 }
231 } else {
232 if (l & PCI_ROM_ADDRESS_ENABLE)
233 res->flags |= IORESOURCE_ROM_ENABLE;
234 l64 = l & PCI_ROM_ADDRESS_MASK;
235 sz64 = sz & PCI_ROM_ADDRESS_MASK;
236 mask64 = PCI_ROM_ADDRESS_MASK;
237 }
238
239 if (res->flags & IORESOURCE_MEM_64) {
240 pci_read_config_dword(dev, pos + 4, &l);
241 pci_write_config_dword(dev, pos + 4, ~0);
242 pci_read_config_dword(dev, pos + 4, &sz);
243 pci_write_config_dword(dev, pos + 4, l);
244
245 l64 |= ((u64)l << 32);
246 sz64 |= ((u64)sz << 32);
247 mask64 |= ((u64)~0 << 32);
248 }
249
250 if (!dev->mmio_always_on && (orig_cmd & PCI_COMMAND_DECODE_ENABLE))
251 pci_write_config_word(dev, PCI_COMMAND, orig_cmd);
252
253 if (!sz64)
254 goto fail;
255
256 sz64 = pci_size(l64, sz64, mask64);
257 if (!sz64) {
258 pci_info(dev, FW_BUG "%s: invalid; can't size\n", res_name);
259 goto fail;
260 }
261
262 if (res->flags & IORESOURCE_MEM_64) {
263 if ((sizeof(pci_bus_addr_t) < 8 || sizeof(resource_size_t) < 8)
264 && sz64 > 0x100000000ULL) {
265 res->flags |= IORESOURCE_UNSET | IORESOURCE_DISABLED;
266 res->start = 0;
267 res->end = 0;
268 pci_err(dev, "%s: can't handle BAR larger than 4GB (size %#010llx)\n",
269 res_name, (unsigned long long)sz64);
270 goto out;
271 }
272
273 if ((sizeof(pci_bus_addr_t) < 8) && l) {
274 /* Above 32-bit boundary; try to reallocate */
275 res->flags |= IORESOURCE_UNSET;
276 res->start = 0;
277 res->end = sz64 - 1;
278 pci_info(dev, "%s: can't handle BAR above 4GB (bus address %#010llx)\n",
279 res_name, (unsigned long long)l64);
280 goto out;
281 }
282 }
283
284 region.start = l64;
285 region.end = l64 + sz64 - 1;
286
287 pcibios_bus_to_resource(dev->bus, res, ®ion);
288 pcibios_resource_to_bus(dev->bus, &inverted_region, res);
289
290 /*
291 * If "A" is a BAR value (a bus address), "bus_to_resource(A)" is
292 * the corresponding resource address (the physical address used by
293 * the CPU. Converting that resource address back to a bus address
294 * should yield the original BAR value:
295 *
296 * resource_to_bus(bus_to_resource(A)) == A
297 *
298 * If it doesn't, CPU accesses to "bus_to_resource(A)" will not
299 * be claimed by the device.
300 */
301 if (inverted_region.start != region.start) {
302 res->flags |= IORESOURCE_UNSET;
303 res->start = 0;
304 res->end = region.end - region.start;
305 pci_info(dev, "%s: initial BAR value %#010llx invalid\n",
306 res_name, (unsigned long long)region.start);
307 }
308
309 goto out;
310
311
312fail:
313 res->flags = 0;
314out:
315 if (res->flags)
316 pci_info(dev, "%s %pR\n", res_name, res);
317
318 return (res->flags & IORESOURCE_MEM_64) ? 1 : 0;
319}
320
321static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom)
322{
323 unsigned int pos, reg;
324
325 if (dev->non_compliant_bars)
326 return;
327
328 /* Per PCIe r4.0, sec 9.3.4.1.11, the VF BARs are all RO Zero */
329 if (dev->is_virtfn)
330 return;
331
332 for (pos = 0; pos < howmany; pos++) {
333 struct resource *res = &dev->resource[pos];
334 reg = PCI_BASE_ADDRESS_0 + (pos << 2);
335 pos += __pci_read_base(dev, pci_bar_unknown, res, reg);
336 }
337
338 if (rom) {
339 struct resource *res = &dev->resource[PCI_ROM_RESOURCE];
340 dev->rom_base_reg = rom;
341 res->flags = IORESOURCE_MEM | IORESOURCE_PREFETCH |
342 IORESOURCE_READONLY | IORESOURCE_SIZEALIGN;
343 __pci_read_base(dev, pci_bar_mem32, res, rom);
344 }
345}
346
347static void pci_read_bridge_io(struct pci_dev *dev, struct resource *res,
348 bool log)
349{
350 u8 io_base_lo, io_limit_lo;
351 unsigned long io_mask, io_granularity, base, limit;
352 struct pci_bus_region region;
353
354 io_mask = PCI_IO_RANGE_MASK;
355 io_granularity = 0x1000;
356 if (dev->io_window_1k) {
357 /* Support 1K I/O space granularity */
358 io_mask = PCI_IO_1K_RANGE_MASK;
359 io_granularity = 0x400;
360 }
361
362 pci_read_config_byte(dev, PCI_IO_BASE, &io_base_lo);
363 pci_read_config_byte(dev, PCI_IO_LIMIT, &io_limit_lo);
364 base = (io_base_lo & io_mask) << 8;
365 limit = (io_limit_lo & io_mask) << 8;
366
367 if ((io_base_lo & PCI_IO_RANGE_TYPE_MASK) == PCI_IO_RANGE_TYPE_32) {
368 u16 io_base_hi, io_limit_hi;
369
370 pci_read_config_word(dev, PCI_IO_BASE_UPPER16, &io_base_hi);
371 pci_read_config_word(dev, PCI_IO_LIMIT_UPPER16, &io_limit_hi);
372 base |= ((unsigned long) io_base_hi << 16);
373 limit |= ((unsigned long) io_limit_hi << 16);
374 }
375
376 if (base <= limit) {
377 res->flags = (io_base_lo & PCI_IO_RANGE_TYPE_MASK) | IORESOURCE_IO;
378 region.start = base;
379 region.end = limit + io_granularity - 1;
380 pcibios_bus_to_resource(dev->bus, res, ®ion);
381 if (log)
382 pci_info(dev, " bridge window %pR\n", res);
383 }
384}
385
386static void pci_read_bridge_mmio(struct pci_dev *dev, struct resource *res,
387 bool log)
388{
389 u16 mem_base_lo, mem_limit_lo;
390 unsigned long base, limit;
391 struct pci_bus_region region;
392
393 pci_read_config_word(dev, PCI_MEMORY_BASE, &mem_base_lo);
394 pci_read_config_word(dev, PCI_MEMORY_LIMIT, &mem_limit_lo);
395 base = ((unsigned long) mem_base_lo & PCI_MEMORY_RANGE_MASK) << 16;
396 limit = ((unsigned long) mem_limit_lo & PCI_MEMORY_RANGE_MASK) << 16;
397 if (base <= limit) {
398 res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM;
399 region.start = base;
400 region.end = limit + 0xfffff;
401 pcibios_bus_to_resource(dev->bus, res, ®ion);
402 if (log)
403 pci_info(dev, " bridge window %pR\n", res);
404 }
405}
406
407static void pci_read_bridge_mmio_pref(struct pci_dev *dev, struct resource *res,
408 bool log)
409{
410 u16 mem_base_lo, mem_limit_lo;
411 u64 base64, limit64;
412 pci_bus_addr_t base, limit;
413 struct pci_bus_region region;
414
415 pci_read_config_word(dev, PCI_PREF_MEMORY_BASE, &mem_base_lo);
416 pci_read_config_word(dev, PCI_PREF_MEMORY_LIMIT, &mem_limit_lo);
417 base64 = (mem_base_lo & PCI_PREF_RANGE_MASK) << 16;
418 limit64 = (mem_limit_lo & PCI_PREF_RANGE_MASK) << 16;
419
420 if ((mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64) {
421 u32 mem_base_hi, mem_limit_hi;
422
423 pci_read_config_dword(dev, PCI_PREF_BASE_UPPER32, &mem_base_hi);
424 pci_read_config_dword(dev, PCI_PREF_LIMIT_UPPER32, &mem_limit_hi);
425
426 /*
427 * Some bridges set the base > limit by default, and some
428 * (broken) BIOSes do not initialize them. If we find
429 * this, just assume they are not being used.
430 */
431 if (mem_base_hi <= mem_limit_hi) {
432 base64 |= (u64) mem_base_hi << 32;
433 limit64 |= (u64) mem_limit_hi << 32;
434 }
435 }
436
437 base = (pci_bus_addr_t) base64;
438 limit = (pci_bus_addr_t) limit64;
439
440 if (base != base64) {
441 pci_err(dev, "can't handle bridge window above 4GB (bus address %#010llx)\n",
442 (unsigned long long) base64);
443 return;
444 }
445
446 if (base <= limit) {
447 res->flags = (mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) |
448 IORESOURCE_MEM | IORESOURCE_PREFETCH;
449 if (res->flags & PCI_PREF_RANGE_TYPE_64)
450 res->flags |= IORESOURCE_MEM_64;
451 region.start = base;
452 region.end = limit + 0xfffff;
453 pcibios_bus_to_resource(dev->bus, res, ®ion);
454 if (log)
455 pci_info(dev, " bridge window %pR\n", res);
456 }
457}
458
459static void pci_read_bridge_windows(struct pci_dev *bridge)
460{
461 u32 buses;
462 u16 io;
463 u32 pmem, tmp;
464 struct resource res;
465
466 pci_read_config_dword(bridge, PCI_PRIMARY_BUS, &buses);
467 res.flags = IORESOURCE_BUS;
468 res.start = (buses >> 8) & 0xff;
469 res.end = (buses >> 16) & 0xff;
470 pci_info(bridge, "PCI bridge to %pR%s\n", &res,
471 bridge->transparent ? " (subtractive decode)" : "");
472
473 pci_read_config_word(bridge, PCI_IO_BASE, &io);
474 if (!io) {
475 pci_write_config_word(bridge, PCI_IO_BASE, 0xe0f0);
476 pci_read_config_word(bridge, PCI_IO_BASE, &io);
477 pci_write_config_word(bridge, PCI_IO_BASE, 0x0);
478 }
479 if (io) {
480 bridge->io_window = 1;
481 pci_read_bridge_io(bridge, &res, true);
482 }
483
484 pci_read_bridge_mmio(bridge, &res, true);
485
486 /*
487 * DECchip 21050 pass 2 errata: the bridge may miss an address
488 * disconnect boundary by one PCI data phase. Workaround: do not
489 * use prefetching on this device.
490 */
491 if (bridge->vendor == PCI_VENDOR_ID_DEC && bridge->device == 0x0001)
492 return;
493
494 pci_read_config_dword(bridge, PCI_PREF_MEMORY_BASE, &pmem);
495 if (!pmem) {
496 pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE,
497 0xffe0fff0);
498 pci_read_config_dword(bridge, PCI_PREF_MEMORY_BASE, &pmem);
499 pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE, 0x0);
500 }
501 if (!pmem)
502 return;
503
504 bridge->pref_window = 1;
505
506 if ((pmem & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64) {
507
508 /*
509 * Bridge claims to have a 64-bit prefetchable memory
510 * window; verify that the upper bits are actually
511 * writable.
512 */
513 pci_read_config_dword(bridge, PCI_PREF_BASE_UPPER32, &pmem);
514 pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32,
515 0xffffffff);
516 pci_read_config_dword(bridge, PCI_PREF_BASE_UPPER32, &tmp);
517 pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32, pmem);
518 if (tmp)
519 bridge->pref_64_window = 1;
520 }
521
522 pci_read_bridge_mmio_pref(bridge, &res, true);
523}
524
525void pci_read_bridge_bases(struct pci_bus *child)
526{
527 struct pci_dev *dev = child->self;
528 struct resource *res;
529 int i;
530
531 if (pci_is_root_bus(child)) /* It's a host bus, nothing to read */
532 return;
533
534 pci_info(dev, "PCI bridge to %pR%s\n",
535 &child->busn_res,
536 dev->transparent ? " (subtractive decode)" : "");
537
538 pci_bus_remove_resources(child);
539 for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++)
540 child->resource[i] = &dev->resource[PCI_BRIDGE_RESOURCES+i];
541
542 pci_read_bridge_io(child->self, child->resource[0], false);
543 pci_read_bridge_mmio(child->self, child->resource[1], false);
544 pci_read_bridge_mmio_pref(child->self, child->resource[2], false);
545
546 if (!dev->transparent)
547 return;
548
549 pci_bus_for_each_resource(child->parent, res) {
550 if (!res || !res->flags)
551 continue;
552
553 pci_bus_add_resource(child, res);
554 pci_info(dev, " bridge window %pR (subtractive decode)\n", res);
555 }
556}
557
558static struct pci_bus *pci_alloc_bus(struct pci_bus *parent)
559{
560 struct pci_bus *b;
561
562 b = kzalloc(sizeof(*b), GFP_KERNEL);
563 if (!b)
564 return NULL;
565
566 INIT_LIST_HEAD(&b->node);
567 INIT_LIST_HEAD(&b->children);
568 INIT_LIST_HEAD(&b->devices);
569 INIT_LIST_HEAD(&b->slots);
570 INIT_LIST_HEAD(&b->resources);
571 b->max_bus_speed = PCI_SPEED_UNKNOWN;
572 b->cur_bus_speed = PCI_SPEED_UNKNOWN;
573#ifdef CONFIG_PCI_DOMAINS_GENERIC
574 if (parent)
575 b->domain_nr = parent->domain_nr;
576#endif
577 return b;
578}
579
580static void pci_release_host_bridge_dev(struct device *dev)
581{
582 struct pci_host_bridge *bridge = to_pci_host_bridge(dev);
583
584 if (bridge->release_fn)
585 bridge->release_fn(bridge);
586
587 pci_free_resource_list(&bridge->windows);
588 pci_free_resource_list(&bridge->dma_ranges);
589 kfree(bridge);
590}
591
592static void pci_init_host_bridge(struct pci_host_bridge *bridge)
593{
594 INIT_LIST_HEAD(&bridge->windows);
595 INIT_LIST_HEAD(&bridge->dma_ranges);
596
597 /*
598 * We assume we can manage these PCIe features. Some systems may
599 * reserve these for use by the platform itself, e.g., an ACPI BIOS
600 * may implement its own AER handling and use _OSC to prevent the
601 * OS from interfering.
602 */
603 bridge->native_aer = 1;
604 bridge->native_pcie_hotplug = 1;
605 bridge->native_shpc_hotplug = 1;
606 bridge->native_pme = 1;
607 bridge->native_ltr = 1;
608 bridge->native_dpc = 1;
609 bridge->domain_nr = PCI_DOMAIN_NR_NOT_SET;
610 bridge->native_cxl_error = 1;
611
612 device_initialize(&bridge->dev);
613}
614
615struct pci_host_bridge *pci_alloc_host_bridge(size_t priv)
616{
617 struct pci_host_bridge *bridge;
618
619 bridge = kzalloc(sizeof(*bridge) + priv, GFP_KERNEL);
620 if (!bridge)
621 return NULL;
622
623 pci_init_host_bridge(bridge);
624 bridge->dev.release = pci_release_host_bridge_dev;
625
626 return bridge;
627}
628EXPORT_SYMBOL(pci_alloc_host_bridge);
629
630static void devm_pci_alloc_host_bridge_release(void *data)
631{
632 pci_free_host_bridge(data);
633}
634
635struct pci_host_bridge *devm_pci_alloc_host_bridge(struct device *dev,
636 size_t priv)
637{
638 int ret;
639 struct pci_host_bridge *bridge;
640
641 bridge = pci_alloc_host_bridge(priv);
642 if (!bridge)
643 return NULL;
644
645 bridge->dev.parent = dev;
646
647 ret = devm_add_action_or_reset(dev, devm_pci_alloc_host_bridge_release,
648 bridge);
649 if (ret)
650 return NULL;
651
652 ret = devm_of_pci_bridge_init(dev, bridge);
653 if (ret)
654 return NULL;
655
656 return bridge;
657}
658EXPORT_SYMBOL(devm_pci_alloc_host_bridge);
659
660void pci_free_host_bridge(struct pci_host_bridge *bridge)
661{
662 put_device(&bridge->dev);
663}
664EXPORT_SYMBOL(pci_free_host_bridge);
665
666/* Indexed by PCI_X_SSTATUS_FREQ (secondary bus mode and frequency) */
667static const unsigned char pcix_bus_speed[] = {
668 PCI_SPEED_UNKNOWN, /* 0 */
669 PCI_SPEED_66MHz_PCIX, /* 1 */
670 PCI_SPEED_100MHz_PCIX, /* 2 */
671 PCI_SPEED_133MHz_PCIX, /* 3 */
672 PCI_SPEED_UNKNOWN, /* 4 */
673 PCI_SPEED_66MHz_PCIX_ECC, /* 5 */
674 PCI_SPEED_100MHz_PCIX_ECC, /* 6 */
675 PCI_SPEED_133MHz_PCIX_ECC, /* 7 */
676 PCI_SPEED_UNKNOWN, /* 8 */
677 PCI_SPEED_66MHz_PCIX_266, /* 9 */
678 PCI_SPEED_100MHz_PCIX_266, /* A */
679 PCI_SPEED_133MHz_PCIX_266, /* B */
680 PCI_SPEED_UNKNOWN, /* C */
681 PCI_SPEED_66MHz_PCIX_533, /* D */
682 PCI_SPEED_100MHz_PCIX_533, /* E */
683 PCI_SPEED_133MHz_PCIX_533 /* F */
684};
685
686/* Indexed by PCI_EXP_LNKCAP_SLS, PCI_EXP_LNKSTA_CLS */
687const unsigned char pcie_link_speed[] = {
688 PCI_SPEED_UNKNOWN, /* 0 */
689 PCIE_SPEED_2_5GT, /* 1 */
690 PCIE_SPEED_5_0GT, /* 2 */
691 PCIE_SPEED_8_0GT, /* 3 */
692 PCIE_SPEED_16_0GT, /* 4 */
693 PCIE_SPEED_32_0GT, /* 5 */
694 PCIE_SPEED_64_0GT, /* 6 */
695 PCI_SPEED_UNKNOWN, /* 7 */
696 PCI_SPEED_UNKNOWN, /* 8 */
697 PCI_SPEED_UNKNOWN, /* 9 */
698 PCI_SPEED_UNKNOWN, /* A */
699 PCI_SPEED_UNKNOWN, /* B */
700 PCI_SPEED_UNKNOWN, /* C */
701 PCI_SPEED_UNKNOWN, /* D */
702 PCI_SPEED_UNKNOWN, /* E */
703 PCI_SPEED_UNKNOWN /* F */
704};
705EXPORT_SYMBOL_GPL(pcie_link_speed);
706
707const char *pci_speed_string(enum pci_bus_speed speed)
708{
709 /* Indexed by the pci_bus_speed enum */
710 static const char *speed_strings[] = {
711 "33 MHz PCI", /* 0x00 */
712 "66 MHz PCI", /* 0x01 */
713 "66 MHz PCI-X", /* 0x02 */
714 "100 MHz PCI-X", /* 0x03 */
715 "133 MHz PCI-X", /* 0x04 */
716 NULL, /* 0x05 */
717 NULL, /* 0x06 */
718 NULL, /* 0x07 */
719 NULL, /* 0x08 */
720 "66 MHz PCI-X 266", /* 0x09 */
721 "100 MHz PCI-X 266", /* 0x0a */
722 "133 MHz PCI-X 266", /* 0x0b */
723 "Unknown AGP", /* 0x0c */
724 "1x AGP", /* 0x0d */
725 "2x AGP", /* 0x0e */
726 "4x AGP", /* 0x0f */
727 "8x AGP", /* 0x10 */
728 "66 MHz PCI-X 533", /* 0x11 */
729 "100 MHz PCI-X 533", /* 0x12 */
730 "133 MHz PCI-X 533", /* 0x13 */
731 "2.5 GT/s PCIe", /* 0x14 */
732 "5.0 GT/s PCIe", /* 0x15 */
733 "8.0 GT/s PCIe", /* 0x16 */
734 "16.0 GT/s PCIe", /* 0x17 */
735 "32.0 GT/s PCIe", /* 0x18 */
736 "64.0 GT/s PCIe", /* 0x19 */
737 };
738
739 if (speed < ARRAY_SIZE(speed_strings))
740 return speed_strings[speed];
741 return "Unknown";
742}
743EXPORT_SYMBOL_GPL(pci_speed_string);
744
745void pcie_update_link_speed(struct pci_bus *bus)
746{
747 struct pci_dev *bridge = bus->self;
748 u16 linksta;
749
750 pcie_capability_read_word(bridge, PCI_EXP_LNKSTA, &linksta);
751 __pcie_update_link_speed(bus, linksta);
752}
753EXPORT_SYMBOL_GPL(pcie_update_link_speed);
754
755static unsigned char agp_speeds[] = {
756 AGP_UNKNOWN,
757 AGP_1X,
758 AGP_2X,
759 AGP_4X,
760 AGP_8X
761};
762
763static enum pci_bus_speed agp_speed(int agp3, int agpstat)
764{
765 int index = 0;
766
767 if (agpstat & 4)
768 index = 3;
769 else if (agpstat & 2)
770 index = 2;
771 else if (agpstat & 1)
772 index = 1;
773 else
774 goto out;
775
776 if (agp3) {
777 index += 2;
778 if (index == 5)
779 index = 0;
780 }
781
782 out:
783 return agp_speeds[index];
784}
785
786static void pci_set_bus_speed(struct pci_bus *bus)
787{
788 struct pci_dev *bridge = bus->self;
789 int pos;
790
791 pos = pci_find_capability(bridge, PCI_CAP_ID_AGP);
792 if (!pos)
793 pos = pci_find_capability(bridge, PCI_CAP_ID_AGP3);
794 if (pos) {
795 u32 agpstat, agpcmd;
796
797 pci_read_config_dword(bridge, pos + PCI_AGP_STATUS, &agpstat);
798 bus->max_bus_speed = agp_speed(agpstat & 8, agpstat & 7);
799
800 pci_read_config_dword(bridge, pos + PCI_AGP_COMMAND, &agpcmd);
801 bus->cur_bus_speed = agp_speed(agpstat & 8, agpcmd & 7);
802 }
803
804 pos = pci_find_capability(bridge, PCI_CAP_ID_PCIX);
805 if (pos) {
806 u16 status;
807 enum pci_bus_speed max;
808
809 pci_read_config_word(bridge, pos + PCI_X_BRIDGE_SSTATUS,
810 &status);
811
812 if (status & PCI_X_SSTATUS_533MHZ) {
813 max = PCI_SPEED_133MHz_PCIX_533;
814 } else if (status & PCI_X_SSTATUS_266MHZ) {
815 max = PCI_SPEED_133MHz_PCIX_266;
816 } else if (status & PCI_X_SSTATUS_133MHZ) {
817 if ((status & PCI_X_SSTATUS_VERS) == PCI_X_SSTATUS_V2)
818 max = PCI_SPEED_133MHz_PCIX_ECC;
819 else
820 max = PCI_SPEED_133MHz_PCIX;
821 } else {
822 max = PCI_SPEED_66MHz_PCIX;
823 }
824
825 bus->max_bus_speed = max;
826 bus->cur_bus_speed =
827 pcix_bus_speed[FIELD_GET(PCI_X_SSTATUS_FREQ, status)];
828
829 return;
830 }
831
832 if (pci_is_pcie(bridge)) {
833 u32 linkcap;
834
835 pcie_capability_read_dword(bridge, PCI_EXP_LNKCAP, &linkcap);
836 bus->max_bus_speed = pcie_link_speed[linkcap & PCI_EXP_LNKCAP_SLS];
837
838 pcie_update_link_speed(bus);
839 }
840}
841
842static struct irq_domain *pci_host_bridge_msi_domain(struct pci_bus *bus)
843{
844 struct irq_domain *d;
845
846 /* If the host bridge driver sets a MSI domain of the bridge, use it */
847 d = dev_get_msi_domain(bus->bridge);
848
849 /*
850 * Any firmware interface that can resolve the msi_domain
851 * should be called from here.
852 */
853 if (!d)
854 d = pci_host_bridge_of_msi_domain(bus);
855 if (!d)
856 d = pci_host_bridge_acpi_msi_domain(bus);
857
858 /*
859 * If no IRQ domain was found via the OF tree, try looking it up
860 * directly through the fwnode_handle.
861 */
862 if (!d) {
863 struct fwnode_handle *fwnode = pci_root_bus_fwnode(bus);
864
865 if (fwnode)
866 d = irq_find_matching_fwnode(fwnode,
867 DOMAIN_BUS_PCI_MSI);
868 }
869
870 return d;
871}
872
873static void pci_set_bus_msi_domain(struct pci_bus *bus)
874{
875 struct irq_domain *d;
876 struct pci_bus *b;
877
878 /*
879 * The bus can be a root bus, a subordinate bus, or a virtual bus
880 * created by an SR-IOV device. Walk up to the first bridge device
881 * found or derive the domain from the host bridge.
882 */
883 for (b = bus, d = NULL; !d && !pci_is_root_bus(b); b = b->parent) {
884 if (b->self)
885 d = dev_get_msi_domain(&b->self->dev);
886 }
887
888 if (!d)
889 d = pci_host_bridge_msi_domain(b);
890
891 dev_set_msi_domain(&bus->dev, d);
892}
893
894static bool pci_preserve_config(struct pci_host_bridge *host_bridge)
895{
896 if (pci_acpi_preserve_config(host_bridge))
897 return true;
898
899 if (host_bridge->dev.parent && host_bridge->dev.parent->of_node)
900 return of_pci_preserve_config(host_bridge->dev.parent->of_node);
901
902 return false;
903}
904
905static int pci_register_host_bridge(struct pci_host_bridge *bridge)
906{
907 struct device *parent = bridge->dev.parent;
908 struct resource_entry *window, *next, *n;
909 struct pci_bus *bus, *b;
910 resource_size_t offset, next_offset;
911 LIST_HEAD(resources);
912 struct resource *res, *next_res;
913 char addr[64], *fmt;
914 const char *name;
915 int err;
916
917 bus = pci_alloc_bus(NULL);
918 if (!bus)
919 return -ENOMEM;
920
921 bridge->bus = bus;
922
923 bus->sysdata = bridge->sysdata;
924 bus->ops = bridge->ops;
925 bus->number = bus->busn_res.start = bridge->busnr;
926#ifdef CONFIG_PCI_DOMAINS_GENERIC
927 if (bridge->domain_nr == PCI_DOMAIN_NR_NOT_SET)
928 bus->domain_nr = pci_bus_find_domain_nr(bus, parent);
929 else
930 bus->domain_nr = bridge->domain_nr;
931 if (bus->domain_nr < 0) {
932 err = bus->domain_nr;
933 goto free;
934 }
935#endif
936
937 b = pci_find_bus(pci_domain_nr(bus), bridge->busnr);
938 if (b) {
939 /* Ignore it if we already got here via a different bridge */
940 dev_dbg(&b->dev, "bus already known\n");
941 err = -EEXIST;
942 goto free;
943 }
944
945 dev_set_name(&bridge->dev, "pci%04x:%02x", pci_domain_nr(bus),
946 bridge->busnr);
947
948 err = pcibios_root_bridge_prepare(bridge);
949 if (err)
950 goto free;
951
952 /* Temporarily move resources off the list */
953 list_splice_init(&bridge->windows, &resources);
954 err = device_add(&bridge->dev);
955 if (err) {
956 put_device(&bridge->dev);
957 goto free;
958 }
959 bus->bridge = get_device(&bridge->dev);
960 device_enable_async_suspend(bus->bridge);
961 pci_set_bus_of_node(bus);
962 pci_set_bus_msi_domain(bus);
963 if (bridge->msi_domain && !dev_get_msi_domain(&bus->dev) &&
964 !pci_host_of_has_msi_map(parent))
965 bus->bus_flags |= PCI_BUS_FLAGS_NO_MSI;
966
967 if (!parent)
968 set_dev_node(bus->bridge, pcibus_to_node(bus));
969
970 bus->dev.class = &pcibus_class;
971 bus->dev.parent = bus->bridge;
972
973 dev_set_name(&bus->dev, "%04x:%02x", pci_domain_nr(bus), bus->number);
974 name = dev_name(&bus->dev);
975
976 err = device_register(&bus->dev);
977 if (err)
978 goto unregister;
979
980 pcibios_add_bus(bus);
981
982 if (bus->ops->add_bus) {
983 err = bus->ops->add_bus(bus);
984 if (WARN_ON(err < 0))
985 dev_err(&bus->dev, "failed to add bus: %d\n", err);
986 }
987
988 /* Create legacy_io and legacy_mem files for this bus */
989 pci_create_legacy_files(bus);
990
991 if (parent)
992 dev_info(parent, "PCI host bridge to bus %s\n", name);
993 else
994 pr_info("PCI host bridge to bus %s\n", name);
995
996 if (nr_node_ids > 1 && pcibus_to_node(bus) == NUMA_NO_NODE)
997 dev_warn(&bus->dev, "Unknown NUMA node; performance will be reduced\n");
998
999 /* Check if the boot configuration by FW needs to be preserved */
1000 bridge->preserve_config = pci_preserve_config(bridge);
1001
1002 /* Coalesce contiguous windows */
1003 resource_list_for_each_entry_safe(window, n, &resources) {
1004 if (list_is_last(&window->node, &resources))
1005 break;
1006
1007 next = list_next_entry(window, node);
1008 offset = window->offset;
1009 res = window->res;
1010 next_offset = next->offset;
1011 next_res = next->res;
1012
1013 if (res->flags != next_res->flags || offset != next_offset)
1014 continue;
1015
1016 if (res->end + 1 == next_res->start) {
1017 next_res->start = res->start;
1018 res->flags = res->start = res->end = 0;
1019 }
1020 }
1021
1022 /* Add initial resources to the bus */
1023 resource_list_for_each_entry_safe(window, n, &resources) {
1024 offset = window->offset;
1025 res = window->res;
1026 if (!res->flags && !res->start && !res->end) {
1027 release_resource(res);
1028 resource_list_destroy_entry(window);
1029 continue;
1030 }
1031
1032 list_move_tail(&window->node, &bridge->windows);
1033
1034 if (res->flags & IORESOURCE_BUS)
1035 pci_bus_insert_busn_res(bus, bus->number, res->end);
1036 else
1037 pci_bus_add_resource(bus, res);
1038
1039 if (offset) {
1040 if (resource_type(res) == IORESOURCE_IO)
1041 fmt = " (bus address [%#06llx-%#06llx])";
1042 else
1043 fmt = " (bus address [%#010llx-%#010llx])";
1044
1045 snprintf(addr, sizeof(addr), fmt,
1046 (unsigned long long)(res->start - offset),
1047 (unsigned long long)(res->end - offset));
1048 } else
1049 addr[0] = '\0';
1050
1051 dev_info(&bus->dev, "root bus resource %pR%s\n", res, addr);
1052 }
1053
1054 down_write(&pci_bus_sem);
1055 list_add_tail(&bus->node, &pci_root_buses);
1056 up_write(&pci_bus_sem);
1057
1058 return 0;
1059
1060unregister:
1061 put_device(&bridge->dev);
1062 device_del(&bridge->dev);
1063
1064free:
1065#ifdef CONFIG_PCI_DOMAINS_GENERIC
1066 pci_bus_release_domain_nr(parent, bus->domain_nr);
1067#endif
1068 kfree(bus);
1069 return err;
1070}
1071
1072static bool pci_bridge_child_ext_cfg_accessible(struct pci_dev *bridge)
1073{
1074 int pos;
1075 u32 status;
1076
1077 /*
1078 * If extended config space isn't accessible on a bridge's primary
1079 * bus, we certainly can't access it on the secondary bus.
1080 */
1081 if (bridge->bus->bus_flags & PCI_BUS_FLAGS_NO_EXTCFG)
1082 return false;
1083
1084 /*
1085 * PCIe Root Ports and switch ports are PCIe on both sides, so if
1086 * extended config space is accessible on the primary, it's also
1087 * accessible on the secondary.
1088 */
1089 if (pci_is_pcie(bridge) &&
1090 (pci_pcie_type(bridge) == PCI_EXP_TYPE_ROOT_PORT ||
1091 pci_pcie_type(bridge) == PCI_EXP_TYPE_UPSTREAM ||
1092 pci_pcie_type(bridge) == PCI_EXP_TYPE_DOWNSTREAM))
1093 return true;
1094
1095 /*
1096 * For the other bridge types:
1097 * - PCI-to-PCI bridges
1098 * - PCIe-to-PCI/PCI-X forward bridges
1099 * - PCI/PCI-X-to-PCIe reverse bridges
1100 * extended config space on the secondary side is only accessible
1101 * if the bridge supports PCI-X Mode 2.
1102 */
1103 pos = pci_find_capability(bridge, PCI_CAP_ID_PCIX);
1104 if (!pos)
1105 return false;
1106
1107 pci_read_config_dword(bridge, pos + PCI_X_STATUS, &status);
1108 return status & (PCI_X_STATUS_266MHZ | PCI_X_STATUS_533MHZ);
1109}
1110
1111static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent,
1112 struct pci_dev *bridge, int busnr)
1113{
1114 struct pci_bus *child;
1115 struct pci_host_bridge *host;
1116 int i;
1117 int ret;
1118
1119 /* Allocate a new bus and inherit stuff from the parent */
1120 child = pci_alloc_bus(parent);
1121 if (!child)
1122 return NULL;
1123
1124 child->parent = parent;
1125 child->sysdata = parent->sysdata;
1126 child->bus_flags = parent->bus_flags;
1127
1128 host = pci_find_host_bridge(parent);
1129 if (host->child_ops)
1130 child->ops = host->child_ops;
1131 else
1132 child->ops = parent->ops;
1133
1134 /*
1135 * Initialize some portions of the bus device, but don't register
1136 * it now as the parent is not properly set up yet.
1137 */
1138 child->dev.class = &pcibus_class;
1139 dev_set_name(&child->dev, "%04x:%02x", pci_domain_nr(child), busnr);
1140
1141 /* Set up the primary, secondary and subordinate bus numbers */
1142 child->number = child->busn_res.start = busnr;
1143 child->primary = parent->busn_res.start;
1144 child->busn_res.end = 0xff;
1145
1146 if (!bridge) {
1147 child->dev.parent = parent->bridge;
1148 goto add_dev;
1149 }
1150
1151 child->self = bridge;
1152 child->bridge = get_device(&bridge->dev);
1153 child->dev.parent = child->bridge;
1154 pci_set_bus_of_node(child);
1155 pci_set_bus_speed(child);
1156
1157 /*
1158 * Check whether extended config space is accessible on the child
1159 * bus. Note that we currently assume it is always accessible on
1160 * the root bus.
1161 */
1162 if (!pci_bridge_child_ext_cfg_accessible(bridge)) {
1163 child->bus_flags |= PCI_BUS_FLAGS_NO_EXTCFG;
1164 pci_info(child, "extended config space not accessible\n");
1165 }
1166
1167 /* Set up default resource pointers and names */
1168 for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++) {
1169 child->resource[i] = &bridge->resource[PCI_BRIDGE_RESOURCES+i];
1170 child->resource[i]->name = child->name;
1171 }
1172 bridge->subordinate = child;
1173
1174add_dev:
1175 pci_set_bus_msi_domain(child);
1176 ret = device_register(&child->dev);
1177 WARN_ON(ret < 0);
1178
1179 pcibios_add_bus(child);
1180
1181 if (child->ops->add_bus) {
1182 ret = child->ops->add_bus(child);
1183 if (WARN_ON(ret < 0))
1184 dev_err(&child->dev, "failed to add bus: %d\n", ret);
1185 }
1186
1187 /* Create legacy_io and legacy_mem files for this bus */
1188 pci_create_legacy_files(child);
1189
1190 return child;
1191}
1192
1193struct pci_bus *pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev,
1194 int busnr)
1195{
1196 struct pci_bus *child;
1197
1198 child = pci_alloc_child_bus(parent, dev, busnr);
1199 if (child) {
1200 down_write(&pci_bus_sem);
1201 list_add_tail(&child->node, &parent->children);
1202 up_write(&pci_bus_sem);
1203 }
1204 return child;
1205}
1206EXPORT_SYMBOL(pci_add_new_bus);
1207
1208static void pci_enable_rrs_sv(struct pci_dev *pdev)
1209{
1210 u16 root_cap = 0;
1211
1212 /* Enable Configuration RRS Software Visibility if supported */
1213 pcie_capability_read_word(pdev, PCI_EXP_RTCAP, &root_cap);
1214 if (root_cap & PCI_EXP_RTCAP_RRS_SV) {
1215 pcie_capability_set_word(pdev, PCI_EXP_RTCTL,
1216 PCI_EXP_RTCTL_RRS_SVE);
1217 pdev->config_rrs_sv = 1;
1218 }
1219}
1220
1221static unsigned int pci_scan_child_bus_extend(struct pci_bus *bus,
1222 unsigned int available_buses);
1223/**
1224 * pci_ea_fixed_busnrs() - Read fixed Secondary and Subordinate bus
1225 * numbers from EA capability.
1226 * @dev: Bridge
1227 * @sec: updated with secondary bus number from EA
1228 * @sub: updated with subordinate bus number from EA
1229 *
1230 * If @dev is a bridge with EA capability that specifies valid secondary
1231 * and subordinate bus numbers, return true with the bus numbers in @sec
1232 * and @sub. Otherwise return false.
1233 */
1234static bool pci_ea_fixed_busnrs(struct pci_dev *dev, u8 *sec, u8 *sub)
1235{
1236 int ea, offset;
1237 u32 dw;
1238 u8 ea_sec, ea_sub;
1239
1240 if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE)
1241 return false;
1242
1243 /* find PCI EA capability in list */
1244 ea = pci_find_capability(dev, PCI_CAP_ID_EA);
1245 if (!ea)
1246 return false;
1247
1248 offset = ea + PCI_EA_FIRST_ENT;
1249 pci_read_config_dword(dev, offset, &dw);
1250 ea_sec = FIELD_GET(PCI_EA_SEC_BUS_MASK, dw);
1251 ea_sub = FIELD_GET(PCI_EA_SUB_BUS_MASK, dw);
1252 if (ea_sec == 0 || ea_sub < ea_sec)
1253 return false;
1254
1255 *sec = ea_sec;
1256 *sub = ea_sub;
1257 return true;
1258}
1259
1260/*
1261 * pci_scan_bridge_extend() - Scan buses behind a bridge
1262 * @bus: Parent bus the bridge is on
1263 * @dev: Bridge itself
1264 * @max: Starting subordinate number of buses behind this bridge
1265 * @available_buses: Total number of buses available for this bridge and
1266 * the devices below. After the minimal bus space has
1267 * been allocated the remaining buses will be
1268 * distributed equally between hotplug-capable bridges.
1269 * @pass: Either %0 (scan already configured bridges) or %1 (scan bridges
1270 * that need to be reconfigured.
1271 *
1272 * If it's a bridge, configure it and scan the bus behind it.
1273 * For CardBus bridges, we don't scan behind as the devices will
1274 * be handled by the bridge driver itself.
1275 *
1276 * We need to process bridges in two passes -- first we scan those
1277 * already configured by the BIOS and after we are done with all of
1278 * them, we proceed to assigning numbers to the remaining buses in
1279 * order to avoid overlaps between old and new bus numbers.
1280 *
1281 * Return: New subordinate number covering all buses behind this bridge.
1282 */
1283static int pci_scan_bridge_extend(struct pci_bus *bus, struct pci_dev *dev,
1284 int max, unsigned int available_buses,
1285 int pass)
1286{
1287 struct pci_bus *child;
1288 int is_cardbus = (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS);
1289 u32 buses, i, j = 0;
1290 u16 bctl;
1291 u8 primary, secondary, subordinate;
1292 int broken = 0;
1293 bool fixed_buses;
1294 u8 fixed_sec, fixed_sub;
1295 int next_busnr;
1296
1297 /*
1298 * Make sure the bridge is powered on to be able to access config
1299 * space of devices below it.
1300 */
1301 pm_runtime_get_sync(&dev->dev);
1302
1303 pci_read_config_dword(dev, PCI_PRIMARY_BUS, &buses);
1304 primary = buses & 0xFF;
1305 secondary = (buses >> 8) & 0xFF;
1306 subordinate = (buses >> 16) & 0xFF;
1307
1308 pci_dbg(dev, "scanning [bus %02x-%02x] behind bridge, pass %d\n",
1309 secondary, subordinate, pass);
1310
1311 if (!primary && (primary != bus->number) && secondary && subordinate) {
1312 pci_warn(dev, "Primary bus is hard wired to 0\n");
1313 primary = bus->number;
1314 }
1315
1316 /* Check if setup is sensible at all */
1317 if (!pass &&
1318 (primary != bus->number || secondary <= bus->number ||
1319 secondary > subordinate)) {
1320 pci_info(dev, "bridge configuration invalid ([bus %02x-%02x]), reconfiguring\n",
1321 secondary, subordinate);
1322 broken = 1;
1323 }
1324
1325 /*
1326 * Disable Master-Abort Mode during probing to avoid reporting of
1327 * bus errors in some architectures.
1328 */
1329 pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &bctl);
1330 pci_write_config_word(dev, PCI_BRIDGE_CONTROL,
1331 bctl & ~PCI_BRIDGE_CTL_MASTER_ABORT);
1332
1333 pci_enable_rrs_sv(dev);
1334
1335 if ((secondary || subordinate) && !pcibios_assign_all_busses() &&
1336 !is_cardbus && !broken) {
1337 unsigned int cmax, buses;
1338
1339 /*
1340 * Bus already configured by firmware, process it in the
1341 * first pass and just note the configuration.
1342 */
1343 if (pass)
1344 goto out;
1345
1346 /*
1347 * The bus might already exist for two reasons: Either we
1348 * are rescanning the bus or the bus is reachable through
1349 * more than one bridge. The second case can happen with
1350 * the i450NX chipset.
1351 */
1352 child = pci_find_bus(pci_domain_nr(bus), secondary);
1353 if (!child) {
1354 child = pci_add_new_bus(bus, dev, secondary);
1355 if (!child)
1356 goto out;
1357 child->primary = primary;
1358 pci_bus_insert_busn_res(child, secondary, subordinate);
1359 child->bridge_ctl = bctl;
1360 }
1361
1362 buses = subordinate - secondary;
1363 cmax = pci_scan_child_bus_extend(child, buses);
1364 if (cmax > subordinate)
1365 pci_warn(dev, "bridge has subordinate %02x but max busn %02x\n",
1366 subordinate, cmax);
1367
1368 /* Subordinate should equal child->busn_res.end */
1369 if (subordinate > max)
1370 max = subordinate;
1371 } else {
1372
1373 /*
1374 * We need to assign a number to this bus which we always
1375 * do in the second pass.
1376 */
1377 if (!pass) {
1378 if (pcibios_assign_all_busses() || broken || is_cardbus)
1379
1380 /*
1381 * Temporarily disable forwarding of the
1382 * configuration cycles on all bridges in
1383 * this bus segment to avoid possible
1384 * conflicts in the second pass between two
1385 * bridges programmed with overlapping bus
1386 * ranges.
1387 */
1388 pci_write_config_dword(dev, PCI_PRIMARY_BUS,
1389 buses & ~0xffffff);
1390 goto out;
1391 }
1392
1393 /* Clear errors */
1394 pci_write_config_word(dev, PCI_STATUS, 0xffff);
1395
1396 /* Read bus numbers from EA Capability (if present) */
1397 fixed_buses = pci_ea_fixed_busnrs(dev, &fixed_sec, &fixed_sub);
1398 if (fixed_buses)
1399 next_busnr = fixed_sec;
1400 else
1401 next_busnr = max + 1;
1402
1403 /*
1404 * Prevent assigning a bus number that already exists.
1405 * This can happen when a bridge is hot-plugged, so in this
1406 * case we only re-scan this bus.
1407 */
1408 child = pci_find_bus(pci_domain_nr(bus), next_busnr);
1409 if (!child) {
1410 child = pci_add_new_bus(bus, dev, next_busnr);
1411 if (!child)
1412 goto out;
1413 pci_bus_insert_busn_res(child, next_busnr,
1414 bus->busn_res.end);
1415 }
1416 max++;
1417 if (available_buses)
1418 available_buses--;
1419
1420 buses = (buses & 0xff000000)
1421 | ((unsigned int)(child->primary) << 0)
1422 | ((unsigned int)(child->busn_res.start) << 8)
1423 | ((unsigned int)(child->busn_res.end) << 16);
1424
1425 /*
1426 * yenta.c forces a secondary latency timer of 176.
1427 * Copy that behaviour here.
1428 */
1429 if (is_cardbus) {
1430 buses &= ~0xff000000;
1431 buses |= CARDBUS_LATENCY_TIMER << 24;
1432 }
1433
1434 /* We need to blast all three values with a single write */
1435 pci_write_config_dword(dev, PCI_PRIMARY_BUS, buses);
1436
1437 if (!is_cardbus) {
1438 child->bridge_ctl = bctl;
1439 max = pci_scan_child_bus_extend(child, available_buses);
1440 } else {
1441
1442 /*
1443 * For CardBus bridges, we leave 4 bus numbers as
1444 * cards with a PCI-to-PCI bridge can be inserted
1445 * later.
1446 */
1447 for (i = 0; i < CARDBUS_RESERVE_BUSNR; i++) {
1448 struct pci_bus *parent = bus;
1449 if (pci_find_bus(pci_domain_nr(bus),
1450 max+i+1))
1451 break;
1452 while (parent->parent) {
1453 if ((!pcibios_assign_all_busses()) &&
1454 (parent->busn_res.end > max) &&
1455 (parent->busn_res.end <= max+i)) {
1456 j = 1;
1457 }
1458 parent = parent->parent;
1459 }
1460 if (j) {
1461
1462 /*
1463 * Often, there are two CardBus
1464 * bridges -- try to leave one
1465 * valid bus number for each one.
1466 */
1467 i /= 2;
1468 break;
1469 }
1470 }
1471 max += i;
1472 }
1473
1474 /*
1475 * Set subordinate bus number to its real value.
1476 * If fixed subordinate bus number exists from EA
1477 * capability then use it.
1478 */
1479 if (fixed_buses)
1480 max = fixed_sub;
1481 pci_bus_update_busn_res_end(child, max);
1482 pci_write_config_byte(dev, PCI_SUBORDINATE_BUS, max);
1483 }
1484
1485 sprintf(child->name,
1486 (is_cardbus ? "PCI CardBus %04x:%02x" : "PCI Bus %04x:%02x"),
1487 pci_domain_nr(bus), child->number);
1488
1489 /* Check that all devices are accessible */
1490 while (bus->parent) {
1491 if ((child->busn_res.end > bus->busn_res.end) ||
1492 (child->number > bus->busn_res.end) ||
1493 (child->number < bus->number) ||
1494 (child->busn_res.end < bus->number)) {
1495 dev_info(&dev->dev, "devices behind bridge are unusable because %pR cannot be assigned for them\n",
1496 &child->busn_res);
1497 break;
1498 }
1499 bus = bus->parent;
1500 }
1501
1502out:
1503 /* Clear errors in the Secondary Status Register */
1504 pci_write_config_word(dev, PCI_SEC_STATUS, 0xffff);
1505
1506 pci_write_config_word(dev, PCI_BRIDGE_CONTROL, bctl);
1507
1508 pm_runtime_put(&dev->dev);
1509
1510 return max;
1511}
1512
1513/*
1514 * pci_scan_bridge() - Scan buses behind a bridge
1515 * @bus: Parent bus the bridge is on
1516 * @dev: Bridge itself
1517 * @max: Starting subordinate number of buses behind this bridge
1518 * @pass: Either %0 (scan already configured bridges) or %1 (scan bridges
1519 * that need to be reconfigured.
1520 *
1521 * If it's a bridge, configure it and scan the bus behind it.
1522 * For CardBus bridges, we don't scan behind as the devices will
1523 * be handled by the bridge driver itself.
1524 *
1525 * We need to process bridges in two passes -- first we scan those
1526 * already configured by the BIOS and after we are done with all of
1527 * them, we proceed to assigning numbers to the remaining buses in
1528 * order to avoid overlaps between old and new bus numbers.
1529 *
1530 * Return: New subordinate number covering all buses behind this bridge.
1531 */
1532int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass)
1533{
1534 return pci_scan_bridge_extend(bus, dev, max, 0, pass);
1535}
1536EXPORT_SYMBOL(pci_scan_bridge);
1537
1538/*
1539 * Read interrupt line and base address registers.
1540 * The architecture-dependent code can tweak these, of course.
1541 */
1542static void pci_read_irq(struct pci_dev *dev)
1543{
1544 unsigned char irq;
1545
1546 /* VFs are not allowed to use INTx, so skip the config reads */
1547 if (dev->is_virtfn) {
1548 dev->pin = 0;
1549 dev->irq = 0;
1550 return;
1551 }
1552
1553 pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &irq);
1554 dev->pin = irq;
1555 if (irq)
1556 pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
1557 dev->irq = irq;
1558}
1559
1560void set_pcie_port_type(struct pci_dev *pdev)
1561{
1562 int pos;
1563 u16 reg16;
1564 u32 reg32;
1565 int type;
1566 struct pci_dev *parent;
1567
1568 pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
1569 if (!pos)
1570 return;
1571
1572 pdev->pcie_cap = pos;
1573 pci_read_config_word(pdev, pos + PCI_EXP_FLAGS, ®16);
1574 pdev->pcie_flags_reg = reg16;
1575 pci_read_config_dword(pdev, pos + PCI_EXP_DEVCAP, &pdev->devcap);
1576 pdev->pcie_mpss = FIELD_GET(PCI_EXP_DEVCAP_PAYLOAD, pdev->devcap);
1577
1578 pcie_capability_read_dword(pdev, PCI_EXP_LNKCAP, ®32);
1579 if (reg32 & PCI_EXP_LNKCAP_DLLLARC)
1580 pdev->link_active_reporting = 1;
1581
1582 parent = pci_upstream_bridge(pdev);
1583 if (!parent)
1584 return;
1585
1586 /*
1587 * Some systems do not identify their upstream/downstream ports
1588 * correctly so detect impossible configurations here and correct
1589 * the port type accordingly.
1590 */
1591 type = pci_pcie_type(pdev);
1592 if (type == PCI_EXP_TYPE_DOWNSTREAM) {
1593 /*
1594 * If pdev claims to be downstream port but the parent
1595 * device is also downstream port assume pdev is actually
1596 * upstream port.
1597 */
1598 if (pcie_downstream_port(parent)) {
1599 pci_info(pdev, "claims to be downstream port but is acting as upstream port, correcting type\n");
1600 pdev->pcie_flags_reg &= ~PCI_EXP_FLAGS_TYPE;
1601 pdev->pcie_flags_reg |= PCI_EXP_TYPE_UPSTREAM;
1602 }
1603 } else if (type == PCI_EXP_TYPE_UPSTREAM) {
1604 /*
1605 * If pdev claims to be upstream port but the parent
1606 * device is also upstream port assume pdev is actually
1607 * downstream port.
1608 */
1609 if (pci_pcie_type(parent) == PCI_EXP_TYPE_UPSTREAM) {
1610 pci_info(pdev, "claims to be upstream port but is acting as downstream port, correcting type\n");
1611 pdev->pcie_flags_reg &= ~PCI_EXP_FLAGS_TYPE;
1612 pdev->pcie_flags_reg |= PCI_EXP_TYPE_DOWNSTREAM;
1613 }
1614 }
1615}
1616
1617void set_pcie_hotplug_bridge(struct pci_dev *pdev)
1618{
1619 u32 reg32;
1620
1621 pcie_capability_read_dword(pdev, PCI_EXP_SLTCAP, ®32);
1622 if (reg32 & PCI_EXP_SLTCAP_HPC)
1623 pdev->is_hotplug_bridge = 1;
1624}
1625
1626static void set_pcie_thunderbolt(struct pci_dev *dev)
1627{
1628 u16 vsec;
1629
1630 /* Is the device part of a Thunderbolt controller? */
1631 vsec = pci_find_vsec_capability(dev, PCI_VENDOR_ID_INTEL, PCI_VSEC_ID_INTEL_TBT);
1632 if (vsec)
1633 dev->is_thunderbolt = 1;
1634}
1635
1636static void set_pcie_untrusted(struct pci_dev *dev)
1637{
1638 struct pci_dev *parent = pci_upstream_bridge(dev);
1639
1640 if (!parent)
1641 return;
1642 /*
1643 * If the upstream bridge is untrusted we treat this device as
1644 * untrusted as well.
1645 */
1646 if (parent->untrusted) {
1647 dev->untrusted = true;
1648 return;
1649 }
1650
1651 if (arch_pci_dev_is_removable(dev)) {
1652 pci_dbg(dev, "marking as untrusted\n");
1653 dev->untrusted = true;
1654 }
1655}
1656
1657static void pci_set_removable(struct pci_dev *dev)
1658{
1659 struct pci_dev *parent = pci_upstream_bridge(dev);
1660
1661 if (!parent)
1662 return;
1663 /*
1664 * We (only) consider everything tunneled below an external_facing
1665 * device to be removable by the user. We're mainly concerned with
1666 * consumer platforms with user accessible thunderbolt ports that are
1667 * vulnerable to DMA attacks, and we expect those ports to be marked by
1668 * the firmware as external_facing. Devices in traditional hotplug
1669 * slots can technically be removed, but the expectation is that unless
1670 * the port is marked with external_facing, such devices are less
1671 * accessible to user / may not be removed by end user, and thus not
1672 * exposed as "removable" to userspace.
1673 */
1674 if (dev_is_removable(&parent->dev)) {
1675 dev_set_removable(&dev->dev, DEVICE_REMOVABLE);
1676 return;
1677 }
1678
1679 if (arch_pci_dev_is_removable(dev)) {
1680 pci_dbg(dev, "marking as removable\n");
1681 dev_set_removable(&dev->dev, DEVICE_REMOVABLE);
1682 }
1683}
1684
1685/**
1686 * pci_ext_cfg_is_aliased - Is ext config space just an alias of std config?
1687 * @dev: PCI device
1688 *
1689 * PCI Express to PCI/PCI-X Bridge Specification, rev 1.0, 4.1.4 says that
1690 * when forwarding a type1 configuration request the bridge must check that
1691 * the extended register address field is zero. The bridge is not permitted
1692 * to forward the transactions and must handle it as an Unsupported Request.
1693 * Some bridges do not follow this rule and simply drop the extended register
1694 * bits, resulting in the standard config space being aliased, every 256
1695 * bytes across the entire configuration space. Test for this condition by
1696 * comparing the first dword of each potential alias to the vendor/device ID.
1697 * Known offenders:
1698 * ASM1083/1085 PCIe-to-PCI Reversible Bridge (1b21:1080, rev 01 & 03)
1699 * AMD/ATI SBx00 PCI to PCI Bridge (1002:4384, rev 40)
1700 */
1701static bool pci_ext_cfg_is_aliased(struct pci_dev *dev)
1702{
1703#ifdef CONFIG_PCI_QUIRKS
1704 int pos, ret;
1705 u32 header, tmp;
1706
1707 pci_read_config_dword(dev, PCI_VENDOR_ID, &header);
1708
1709 for (pos = PCI_CFG_SPACE_SIZE;
1710 pos < PCI_CFG_SPACE_EXP_SIZE; pos += PCI_CFG_SPACE_SIZE) {
1711 ret = pci_read_config_dword(dev, pos, &tmp);
1712 if ((ret != PCIBIOS_SUCCESSFUL) || (header != tmp))
1713 return false;
1714 }
1715
1716 return true;
1717#else
1718 return false;
1719#endif
1720}
1721
1722/**
1723 * pci_cfg_space_size_ext - Get the configuration space size of the PCI device
1724 * @dev: PCI device
1725 *
1726 * Regular PCI devices have 256 bytes, but PCI-X 2 and PCI Express devices
1727 * have 4096 bytes. Even if the device is capable, that doesn't mean we can
1728 * access it. Maybe we don't have a way to generate extended config space
1729 * accesses, or the device is behind a reverse Express bridge. So we try
1730 * reading the dword at 0x100 which must either be 0 or a valid extended
1731 * capability header.
1732 */
1733static int pci_cfg_space_size_ext(struct pci_dev *dev)
1734{
1735 u32 status;
1736 int pos = PCI_CFG_SPACE_SIZE;
1737
1738 if (pci_read_config_dword(dev, pos, &status) != PCIBIOS_SUCCESSFUL)
1739 return PCI_CFG_SPACE_SIZE;
1740 if (PCI_POSSIBLE_ERROR(status) || pci_ext_cfg_is_aliased(dev))
1741 return PCI_CFG_SPACE_SIZE;
1742
1743 return PCI_CFG_SPACE_EXP_SIZE;
1744}
1745
1746int pci_cfg_space_size(struct pci_dev *dev)
1747{
1748 int pos;
1749 u32 status;
1750 u16 class;
1751
1752#ifdef CONFIG_PCI_IOV
1753 /*
1754 * Per the SR-IOV specification (rev 1.1, sec 3.5), VFs are required to
1755 * implement a PCIe capability and therefore must implement extended
1756 * config space. We can skip the NO_EXTCFG test below and the
1757 * reachability/aliasing test in pci_cfg_space_size_ext() by virtue of
1758 * the fact that the SR-IOV capability on the PF resides in extended
1759 * config space and must be accessible and non-aliased to have enabled
1760 * support for this VF. This is a micro performance optimization for
1761 * systems supporting many VFs.
1762 */
1763 if (dev->is_virtfn)
1764 return PCI_CFG_SPACE_EXP_SIZE;
1765#endif
1766
1767 if (dev->bus->bus_flags & PCI_BUS_FLAGS_NO_EXTCFG)
1768 return PCI_CFG_SPACE_SIZE;
1769
1770 class = dev->class >> 8;
1771 if (class == PCI_CLASS_BRIDGE_HOST)
1772 return pci_cfg_space_size_ext(dev);
1773
1774 if (pci_is_pcie(dev))
1775 return pci_cfg_space_size_ext(dev);
1776
1777 pos = pci_find_capability(dev, PCI_CAP_ID_PCIX);
1778 if (!pos)
1779 return PCI_CFG_SPACE_SIZE;
1780
1781 pci_read_config_dword(dev, pos + PCI_X_STATUS, &status);
1782 if (status & (PCI_X_STATUS_266MHZ | PCI_X_STATUS_533MHZ))
1783 return pci_cfg_space_size_ext(dev);
1784
1785 return PCI_CFG_SPACE_SIZE;
1786}
1787
1788static u32 pci_class(struct pci_dev *dev)
1789{
1790 u32 class;
1791
1792#ifdef CONFIG_PCI_IOV
1793 if (dev->is_virtfn)
1794 return dev->physfn->sriov->class;
1795#endif
1796 pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
1797 return class;
1798}
1799
1800static void pci_subsystem_ids(struct pci_dev *dev, u16 *vendor, u16 *device)
1801{
1802#ifdef CONFIG_PCI_IOV
1803 if (dev->is_virtfn) {
1804 *vendor = dev->physfn->sriov->subsystem_vendor;
1805 *device = dev->physfn->sriov->subsystem_device;
1806 return;
1807 }
1808#endif
1809 pci_read_config_word(dev, PCI_SUBSYSTEM_VENDOR_ID, vendor);
1810 pci_read_config_word(dev, PCI_SUBSYSTEM_ID, device);
1811}
1812
1813static u8 pci_hdr_type(struct pci_dev *dev)
1814{
1815 u8 hdr_type;
1816
1817#ifdef CONFIG_PCI_IOV
1818 if (dev->is_virtfn)
1819 return dev->physfn->sriov->hdr_type;
1820#endif
1821 pci_read_config_byte(dev, PCI_HEADER_TYPE, &hdr_type);
1822 return hdr_type;
1823}
1824
1825#define LEGACY_IO_RESOURCE (IORESOURCE_IO | IORESOURCE_PCI_FIXED)
1826
1827/**
1828 * pci_intx_mask_broken - Test PCI_COMMAND_INTX_DISABLE writability
1829 * @dev: PCI device
1830 *
1831 * Test whether PCI_COMMAND_INTX_DISABLE is writable for @dev. Check this
1832 * at enumeration-time to avoid modifying PCI_COMMAND at run-time.
1833 */
1834static int pci_intx_mask_broken(struct pci_dev *dev)
1835{
1836 u16 orig, toggle, new;
1837
1838 pci_read_config_word(dev, PCI_COMMAND, &orig);
1839 toggle = orig ^ PCI_COMMAND_INTX_DISABLE;
1840 pci_write_config_word(dev, PCI_COMMAND, toggle);
1841 pci_read_config_word(dev, PCI_COMMAND, &new);
1842
1843 pci_write_config_word(dev, PCI_COMMAND, orig);
1844
1845 /*
1846 * PCI_COMMAND_INTX_DISABLE was reserved and read-only prior to PCI
1847 * r2.3, so strictly speaking, a device is not *broken* if it's not
1848 * writable. But we'll live with the misnomer for now.
1849 */
1850 if (new != toggle)
1851 return 1;
1852 return 0;
1853}
1854
1855static void early_dump_pci_device(struct pci_dev *pdev)
1856{
1857 u32 value[256 / 4];
1858 int i;
1859
1860 pci_info(pdev, "config space:\n");
1861
1862 for (i = 0; i < 256; i += 4)
1863 pci_read_config_dword(pdev, i, &value[i / 4]);
1864
1865 print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 1,
1866 value, 256, false);
1867}
1868
1869static const char *pci_type_str(struct pci_dev *dev)
1870{
1871 static const char * const str[] = {
1872 "PCIe Endpoint",
1873 "PCIe Legacy Endpoint",
1874 "PCIe unknown",
1875 "PCIe unknown",
1876 "PCIe Root Port",
1877 "PCIe Switch Upstream Port",
1878 "PCIe Switch Downstream Port",
1879 "PCIe to PCI/PCI-X bridge",
1880 "PCI/PCI-X to PCIe bridge",
1881 "PCIe Root Complex Integrated Endpoint",
1882 "PCIe Root Complex Event Collector",
1883 };
1884 int type;
1885
1886 if (pci_is_pcie(dev)) {
1887 type = pci_pcie_type(dev);
1888 if (type < ARRAY_SIZE(str))
1889 return str[type];
1890
1891 return "PCIe unknown";
1892 }
1893
1894 switch (dev->hdr_type) {
1895 case PCI_HEADER_TYPE_NORMAL:
1896 return "conventional PCI endpoint";
1897 case PCI_HEADER_TYPE_BRIDGE:
1898 return "conventional PCI bridge";
1899 case PCI_HEADER_TYPE_CARDBUS:
1900 return "CardBus bridge";
1901 default:
1902 return "conventional PCI";
1903 }
1904}
1905
1906/**
1907 * pci_setup_device - Fill in class and map information of a device
1908 * @dev: the device structure to fill
1909 *
1910 * Initialize the device structure with information about the device's
1911 * vendor,class,memory and IO-space addresses, IRQ lines etc.
1912 * Called at initialisation of the PCI subsystem and by CardBus services.
1913 * Returns 0 on success and negative if unknown type of device (not normal,
1914 * bridge or CardBus).
1915 */
1916int pci_setup_device(struct pci_dev *dev)
1917{
1918 u32 class;
1919 u16 cmd;
1920 u8 hdr_type;
1921 int err, pos = 0;
1922 struct pci_bus_region region;
1923 struct resource *res;
1924
1925 hdr_type = pci_hdr_type(dev);
1926
1927 dev->sysdata = dev->bus->sysdata;
1928 dev->dev.parent = dev->bus->bridge;
1929 dev->dev.bus = &pci_bus_type;
1930 dev->hdr_type = hdr_type & 0x7f;
1931 dev->multifunction = !!(hdr_type & 0x80);
1932 dev->error_state = pci_channel_io_normal;
1933 set_pcie_port_type(dev);
1934
1935 err = pci_set_of_node(dev);
1936 if (err)
1937 return err;
1938 pci_set_acpi_fwnode(dev);
1939
1940 pci_dev_assign_slot(dev);
1941
1942 /*
1943 * Assume 32-bit PCI; let 64-bit PCI cards (which are far rarer)
1944 * set this higher, assuming the system even supports it.
1945 */
1946 dev->dma_mask = 0xffffffff;
1947
1948 dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(dev->bus),
1949 dev->bus->number, PCI_SLOT(dev->devfn),
1950 PCI_FUNC(dev->devfn));
1951
1952 class = pci_class(dev);
1953
1954 dev->revision = class & 0xff;
1955 dev->class = class >> 8; /* upper 3 bytes */
1956
1957 if (pci_early_dump)
1958 early_dump_pci_device(dev);
1959
1960 /* Need to have dev->class ready */
1961 dev->cfg_size = pci_cfg_space_size(dev);
1962
1963 /* Need to have dev->cfg_size ready */
1964 set_pcie_thunderbolt(dev);
1965
1966 set_pcie_untrusted(dev);
1967
1968 if (pci_is_pcie(dev))
1969 dev->supported_speeds = pcie_get_supported_speeds(dev);
1970
1971 /* "Unknown power state" */
1972 dev->current_state = PCI_UNKNOWN;
1973
1974 /* Early fixups, before probing the BARs */
1975 pci_fixup_device(pci_fixup_early, dev);
1976
1977 pci_set_removable(dev);
1978
1979 pci_info(dev, "[%04x:%04x] type %02x class %#08x %s\n",
1980 dev->vendor, dev->device, dev->hdr_type, dev->class,
1981 pci_type_str(dev));
1982
1983 /* Device class may be changed after fixup */
1984 class = dev->class >> 8;
1985
1986 if (dev->non_compliant_bars && !dev->mmio_always_on) {
1987 pci_read_config_word(dev, PCI_COMMAND, &cmd);
1988 if (cmd & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
1989 pci_info(dev, "device has non-compliant BARs; disabling IO/MEM decoding\n");
1990 cmd &= ~PCI_COMMAND_IO;
1991 cmd &= ~PCI_COMMAND_MEMORY;
1992 pci_write_config_word(dev, PCI_COMMAND, cmd);
1993 }
1994 }
1995
1996 dev->broken_intx_masking = pci_intx_mask_broken(dev);
1997
1998 switch (dev->hdr_type) { /* header type */
1999 case PCI_HEADER_TYPE_NORMAL: /* standard header */
2000 if (class == PCI_CLASS_BRIDGE_PCI)
2001 goto bad;
2002 pci_read_irq(dev);
2003 pci_read_bases(dev, 6, PCI_ROM_ADDRESS);
2004
2005 pci_subsystem_ids(dev, &dev->subsystem_vendor, &dev->subsystem_device);
2006
2007 /*
2008 * Do the ugly legacy mode stuff here rather than broken chip
2009 * quirk code. Legacy mode ATA controllers have fixed
2010 * addresses. These are not always echoed in BAR0-3, and
2011 * BAR0-3 in a few cases contain junk!
2012 */
2013 if (class == PCI_CLASS_STORAGE_IDE) {
2014 u8 progif;
2015 pci_read_config_byte(dev, PCI_CLASS_PROG, &progif);
2016 if ((progif & 1) == 0) {
2017 region.start = 0x1F0;
2018 region.end = 0x1F7;
2019 res = &dev->resource[0];
2020 res->flags = LEGACY_IO_RESOURCE;
2021 pcibios_bus_to_resource(dev->bus, res, ®ion);
2022 pci_info(dev, "BAR 0 %pR: legacy IDE quirk\n",
2023 res);
2024 region.start = 0x3F6;
2025 region.end = 0x3F6;
2026 res = &dev->resource[1];
2027 res->flags = LEGACY_IO_RESOURCE;
2028 pcibios_bus_to_resource(dev->bus, res, ®ion);
2029 pci_info(dev, "BAR 1 %pR: legacy IDE quirk\n",
2030 res);
2031 }
2032 if ((progif & 4) == 0) {
2033 region.start = 0x170;
2034 region.end = 0x177;
2035 res = &dev->resource[2];
2036 res->flags = LEGACY_IO_RESOURCE;
2037 pcibios_bus_to_resource(dev->bus, res, ®ion);
2038 pci_info(dev, "BAR 2 %pR: legacy IDE quirk\n",
2039 res);
2040 region.start = 0x376;
2041 region.end = 0x376;
2042 res = &dev->resource[3];
2043 res->flags = LEGACY_IO_RESOURCE;
2044 pcibios_bus_to_resource(dev->bus, res, ®ion);
2045 pci_info(dev, "BAR 3 %pR: legacy IDE quirk\n",
2046 res);
2047 }
2048 }
2049 break;
2050
2051 case PCI_HEADER_TYPE_BRIDGE: /* bridge header */
2052 /*
2053 * The PCI-to-PCI bridge spec requires that subtractive
2054 * decoding (i.e. transparent) bridge must have programming
2055 * interface code of 0x01.
2056 */
2057 pci_read_irq(dev);
2058 dev->transparent = ((dev->class & 0xff) == 1);
2059 pci_read_bases(dev, 2, PCI_ROM_ADDRESS1);
2060 pci_read_bridge_windows(dev);
2061 set_pcie_hotplug_bridge(dev);
2062 pos = pci_find_capability(dev, PCI_CAP_ID_SSVID);
2063 if (pos) {
2064 pci_read_config_word(dev, pos + PCI_SSVID_VENDOR_ID, &dev->subsystem_vendor);
2065 pci_read_config_word(dev, pos + PCI_SSVID_DEVICE_ID, &dev->subsystem_device);
2066 }
2067 break;
2068
2069 case PCI_HEADER_TYPE_CARDBUS: /* CardBus bridge header */
2070 if (class != PCI_CLASS_BRIDGE_CARDBUS)
2071 goto bad;
2072 pci_read_irq(dev);
2073 pci_read_bases(dev, 1, 0);
2074 pci_read_config_word(dev, PCI_CB_SUBSYSTEM_VENDOR_ID, &dev->subsystem_vendor);
2075 pci_read_config_word(dev, PCI_CB_SUBSYSTEM_ID, &dev->subsystem_device);
2076 break;
2077
2078 default: /* unknown header */
2079 pci_err(dev, "unknown header type %02x, ignoring device\n",
2080 dev->hdr_type);
2081 pci_release_of_node(dev);
2082 return -EIO;
2083
2084 bad:
2085 pci_err(dev, "ignoring class %#08x (doesn't match header type %02x)\n",
2086 dev->class, dev->hdr_type);
2087 dev->class = PCI_CLASS_NOT_DEFINED << 8;
2088 }
2089
2090 /* We found a fine healthy device, go go go... */
2091 return 0;
2092}
2093
2094static void pci_configure_mps(struct pci_dev *dev)
2095{
2096 struct pci_dev *bridge = pci_upstream_bridge(dev);
2097 int mps, mpss, p_mps, rc;
2098
2099 if (!pci_is_pcie(dev))
2100 return;
2101
2102 /* MPS and MRRS fields are of type 'RsvdP' for VFs, short-circuit out */
2103 if (dev->is_virtfn)
2104 return;
2105
2106 /*
2107 * For Root Complex Integrated Endpoints, program the maximum
2108 * supported value unless limited by the PCIE_BUS_PEER2PEER case.
2109 */
2110 if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_END) {
2111 if (pcie_bus_config == PCIE_BUS_PEER2PEER)
2112 mps = 128;
2113 else
2114 mps = 128 << dev->pcie_mpss;
2115 rc = pcie_set_mps(dev, mps);
2116 if (rc) {
2117 pci_warn(dev, "can't set Max Payload Size to %d; if necessary, use \"pci=pcie_bus_safe\" and report a bug\n",
2118 mps);
2119 }
2120 return;
2121 }
2122
2123 if (!bridge || !pci_is_pcie(bridge))
2124 return;
2125
2126 mps = pcie_get_mps(dev);
2127 p_mps = pcie_get_mps(bridge);
2128
2129 if (mps == p_mps)
2130 return;
2131
2132 if (pcie_bus_config == PCIE_BUS_TUNE_OFF) {
2133 pci_warn(dev, "Max Payload Size %d, but upstream %s set to %d; if necessary, use \"pci=pcie_bus_safe\" and report a bug\n",
2134 mps, pci_name(bridge), p_mps);
2135 return;
2136 }
2137
2138 /*
2139 * Fancier MPS configuration is done later by
2140 * pcie_bus_configure_settings()
2141 */
2142 if (pcie_bus_config != PCIE_BUS_DEFAULT)
2143 return;
2144
2145 mpss = 128 << dev->pcie_mpss;
2146 if (mpss < p_mps && pci_pcie_type(bridge) == PCI_EXP_TYPE_ROOT_PORT) {
2147 pcie_set_mps(bridge, mpss);
2148 pci_info(dev, "Upstream bridge's Max Payload Size set to %d (was %d, max %d)\n",
2149 mpss, p_mps, 128 << bridge->pcie_mpss);
2150 p_mps = pcie_get_mps(bridge);
2151 }
2152
2153 rc = pcie_set_mps(dev, p_mps);
2154 if (rc) {
2155 pci_warn(dev, "can't set Max Payload Size to %d; if necessary, use \"pci=pcie_bus_safe\" and report a bug\n",
2156 p_mps);
2157 return;
2158 }
2159
2160 pci_info(dev, "Max Payload Size set to %d (was %d, max %d)\n",
2161 p_mps, mps, mpss);
2162}
2163
2164int pci_configure_extended_tags(struct pci_dev *dev, void *ign)
2165{
2166 struct pci_host_bridge *host;
2167 u32 cap;
2168 u16 ctl;
2169 int ret;
2170
2171 if (!pci_is_pcie(dev))
2172 return 0;
2173
2174 ret = pcie_capability_read_dword(dev, PCI_EXP_DEVCAP, &cap);
2175 if (ret)
2176 return 0;
2177
2178 if (!(cap & PCI_EXP_DEVCAP_EXT_TAG))
2179 return 0;
2180
2181 ret = pcie_capability_read_word(dev, PCI_EXP_DEVCTL, &ctl);
2182 if (ret)
2183 return 0;
2184
2185 host = pci_find_host_bridge(dev->bus);
2186 if (!host)
2187 return 0;
2188
2189 /*
2190 * If some device in the hierarchy doesn't handle Extended Tags
2191 * correctly, make sure they're disabled.
2192 */
2193 if (host->no_ext_tags) {
2194 if (ctl & PCI_EXP_DEVCTL_EXT_TAG) {
2195 pci_info(dev, "disabling Extended Tags\n");
2196 pcie_capability_clear_word(dev, PCI_EXP_DEVCTL,
2197 PCI_EXP_DEVCTL_EXT_TAG);
2198 }
2199 return 0;
2200 }
2201
2202 if (!(ctl & PCI_EXP_DEVCTL_EXT_TAG)) {
2203 pci_info(dev, "enabling Extended Tags\n");
2204 pcie_capability_set_word(dev, PCI_EXP_DEVCTL,
2205 PCI_EXP_DEVCTL_EXT_TAG);
2206 }
2207 return 0;
2208}
2209
2210/**
2211 * pcie_relaxed_ordering_enabled - Probe for PCIe relaxed ordering enable
2212 * @dev: PCI device to query
2213 *
2214 * Returns true if the device has enabled relaxed ordering attribute.
2215 */
2216bool pcie_relaxed_ordering_enabled(struct pci_dev *dev)
2217{
2218 u16 v;
2219
2220 pcie_capability_read_word(dev, PCI_EXP_DEVCTL, &v);
2221
2222 return !!(v & PCI_EXP_DEVCTL_RELAX_EN);
2223}
2224EXPORT_SYMBOL(pcie_relaxed_ordering_enabled);
2225
2226static void pci_configure_relaxed_ordering(struct pci_dev *dev)
2227{
2228 struct pci_dev *root;
2229
2230 /* PCI_EXP_DEVCTL_RELAX_EN is RsvdP in VFs */
2231 if (dev->is_virtfn)
2232 return;
2233
2234 if (!pcie_relaxed_ordering_enabled(dev))
2235 return;
2236
2237 /*
2238 * For now, we only deal with Relaxed Ordering issues with Root
2239 * Ports. Peer-to-Peer DMA is another can of worms.
2240 */
2241 root = pcie_find_root_port(dev);
2242 if (!root)
2243 return;
2244
2245 if (root->dev_flags & PCI_DEV_FLAGS_NO_RELAXED_ORDERING) {
2246 pcie_capability_clear_word(dev, PCI_EXP_DEVCTL,
2247 PCI_EXP_DEVCTL_RELAX_EN);
2248 pci_info(dev, "Relaxed Ordering disabled because the Root Port didn't support it\n");
2249 }
2250}
2251
2252static void pci_configure_eetlp_prefix(struct pci_dev *dev)
2253{
2254#ifdef CONFIG_PCI_PASID
2255 struct pci_dev *bridge;
2256 int pcie_type;
2257 u32 cap;
2258
2259 if (!pci_is_pcie(dev))
2260 return;
2261
2262 pcie_capability_read_dword(dev, PCI_EXP_DEVCAP2, &cap);
2263 if (!(cap & PCI_EXP_DEVCAP2_EE_PREFIX))
2264 return;
2265
2266 pcie_type = pci_pcie_type(dev);
2267 if (pcie_type == PCI_EXP_TYPE_ROOT_PORT ||
2268 pcie_type == PCI_EXP_TYPE_RC_END)
2269 dev->eetlp_prefix_path = 1;
2270 else {
2271 bridge = pci_upstream_bridge(dev);
2272 if (bridge && bridge->eetlp_prefix_path)
2273 dev->eetlp_prefix_path = 1;
2274 }
2275#endif
2276}
2277
2278static void pci_configure_serr(struct pci_dev *dev)
2279{
2280 u16 control;
2281
2282 if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
2283
2284 /*
2285 * A bridge will not forward ERR_ messages coming from an
2286 * endpoint unless SERR# forwarding is enabled.
2287 */
2288 pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &control);
2289 if (!(control & PCI_BRIDGE_CTL_SERR)) {
2290 control |= PCI_BRIDGE_CTL_SERR;
2291 pci_write_config_word(dev, PCI_BRIDGE_CONTROL, control);
2292 }
2293 }
2294}
2295
2296static void pci_configure_device(struct pci_dev *dev)
2297{
2298 pci_configure_mps(dev);
2299 pci_configure_extended_tags(dev, NULL);
2300 pci_configure_relaxed_ordering(dev);
2301 pci_configure_ltr(dev);
2302 pci_configure_aspm_l1ss(dev);
2303 pci_configure_eetlp_prefix(dev);
2304 pci_configure_serr(dev);
2305
2306 pci_acpi_program_hp_params(dev);
2307}
2308
2309static void pci_release_capabilities(struct pci_dev *dev)
2310{
2311 pci_aer_exit(dev);
2312 pci_rcec_exit(dev);
2313 pci_iov_release(dev);
2314 pci_free_cap_save_buffers(dev);
2315}
2316
2317/**
2318 * pci_release_dev - Free a PCI device structure when all users of it are
2319 * finished
2320 * @dev: device that's been disconnected
2321 *
2322 * Will be called only by the device core when all users of this PCI device are
2323 * done.
2324 */
2325static void pci_release_dev(struct device *dev)
2326{
2327 struct pci_dev *pci_dev;
2328
2329 pci_dev = to_pci_dev(dev);
2330 pci_release_capabilities(pci_dev);
2331 pci_release_of_node(pci_dev);
2332 pcibios_release_device(pci_dev);
2333 pci_bus_put(pci_dev->bus);
2334 kfree(pci_dev->driver_override);
2335 bitmap_free(pci_dev->dma_alias_mask);
2336 dev_dbg(dev, "device released\n");
2337 kfree(pci_dev);
2338}
2339
2340static const struct device_type pci_dev_type = {
2341 .groups = pci_dev_attr_groups,
2342};
2343
2344struct pci_dev *pci_alloc_dev(struct pci_bus *bus)
2345{
2346 struct pci_dev *dev;
2347
2348 dev = kzalloc(sizeof(struct pci_dev), GFP_KERNEL);
2349 if (!dev)
2350 return NULL;
2351
2352 INIT_LIST_HEAD(&dev->bus_list);
2353 dev->dev.type = &pci_dev_type;
2354 dev->bus = pci_bus_get(bus);
2355 dev->driver_exclusive_resource = (struct resource) {
2356 .name = "PCI Exclusive",
2357 .start = 0,
2358 .end = -1,
2359 };
2360
2361 spin_lock_init(&dev->pcie_cap_lock);
2362#ifdef CONFIG_PCI_MSI
2363 raw_spin_lock_init(&dev->msi_lock);
2364#endif
2365 return dev;
2366}
2367EXPORT_SYMBOL(pci_alloc_dev);
2368
2369static bool pci_bus_wait_rrs(struct pci_bus *bus, int devfn, u32 *l,
2370 int timeout)
2371{
2372 int delay = 1;
2373
2374 if (!pci_bus_rrs_vendor_id(*l))
2375 return true; /* not a Configuration RRS completion */
2376
2377 if (!timeout)
2378 return false; /* RRS, but caller doesn't want to wait */
2379
2380 /*
2381 * We got the reserved Vendor ID that indicates a completion with
2382 * Configuration Request Retry Status (RRS). Retry until we get a
2383 * valid Vendor ID or we time out.
2384 */
2385 while (pci_bus_rrs_vendor_id(*l)) {
2386 if (delay > timeout) {
2387 pr_warn("pci %04x:%02x:%02x.%d: not ready after %dms; giving up\n",
2388 pci_domain_nr(bus), bus->number,
2389 PCI_SLOT(devfn), PCI_FUNC(devfn), delay - 1);
2390
2391 return false;
2392 }
2393 if (delay >= 1000)
2394 pr_info("pci %04x:%02x:%02x.%d: not ready after %dms; waiting\n",
2395 pci_domain_nr(bus), bus->number,
2396 PCI_SLOT(devfn), PCI_FUNC(devfn), delay - 1);
2397
2398 msleep(delay);
2399 delay *= 2;
2400
2401 if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, l))
2402 return false;
2403 }
2404
2405 if (delay >= 1000)
2406 pr_info("pci %04x:%02x:%02x.%d: ready after %dms\n",
2407 pci_domain_nr(bus), bus->number,
2408 PCI_SLOT(devfn), PCI_FUNC(devfn), delay - 1);
2409
2410 return true;
2411}
2412
2413bool pci_bus_generic_read_dev_vendor_id(struct pci_bus *bus, int devfn, u32 *l,
2414 int timeout)
2415{
2416 if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, l))
2417 return false;
2418
2419 /* Some broken boards return 0 or ~0 (PCI_ERROR_RESPONSE) if a slot is empty: */
2420 if (PCI_POSSIBLE_ERROR(*l) || *l == 0x00000000 ||
2421 *l == 0x0000ffff || *l == 0xffff0000)
2422 return false;
2423
2424 if (pci_bus_rrs_vendor_id(*l))
2425 return pci_bus_wait_rrs(bus, devfn, l, timeout);
2426
2427 return true;
2428}
2429
2430bool pci_bus_read_dev_vendor_id(struct pci_bus *bus, int devfn, u32 *l,
2431 int timeout)
2432{
2433#ifdef CONFIG_PCI_QUIRKS
2434 struct pci_dev *bridge = bus->self;
2435
2436 /*
2437 * Certain IDT switches have an issue where they improperly trigger
2438 * ACS Source Validation errors on completions for config reads.
2439 */
2440 if (bridge && bridge->vendor == PCI_VENDOR_ID_IDT &&
2441 bridge->device == 0x80b5)
2442 return pci_idt_bus_quirk(bus, devfn, l, timeout);
2443#endif
2444
2445 return pci_bus_generic_read_dev_vendor_id(bus, devfn, l, timeout);
2446}
2447EXPORT_SYMBOL(pci_bus_read_dev_vendor_id);
2448
2449/*
2450 * Read the config data for a PCI device, sanity-check it,
2451 * and fill in the dev structure.
2452 */
2453static struct pci_dev *pci_scan_device(struct pci_bus *bus, int devfn)
2454{
2455 struct pci_dev *dev;
2456 u32 l;
2457
2458 if (!pci_bus_read_dev_vendor_id(bus, devfn, &l, 60*1000))
2459 return NULL;
2460
2461 dev = pci_alloc_dev(bus);
2462 if (!dev)
2463 return NULL;
2464
2465 dev->devfn = devfn;
2466 dev->vendor = l & 0xffff;
2467 dev->device = (l >> 16) & 0xffff;
2468
2469 if (pci_setup_device(dev)) {
2470 pci_bus_put(dev->bus);
2471 kfree(dev);
2472 return NULL;
2473 }
2474
2475 return dev;
2476}
2477
2478void pcie_report_downtraining(struct pci_dev *dev)
2479{
2480 if (!pci_is_pcie(dev))
2481 return;
2482
2483 /* Look from the device up to avoid downstream ports with no devices */
2484 if ((pci_pcie_type(dev) != PCI_EXP_TYPE_ENDPOINT) &&
2485 (pci_pcie_type(dev) != PCI_EXP_TYPE_LEG_END) &&
2486 (pci_pcie_type(dev) != PCI_EXP_TYPE_UPSTREAM))
2487 return;
2488
2489 /* Multi-function PCIe devices share the same link/status */
2490 if (PCI_FUNC(dev->devfn) != 0 || dev->is_virtfn)
2491 return;
2492
2493 /* Print link status only if the device is constrained by the fabric */
2494 __pcie_print_link_status(dev, false);
2495}
2496
2497static void pci_init_capabilities(struct pci_dev *dev)
2498{
2499 pci_ea_init(dev); /* Enhanced Allocation */
2500 pci_msi_init(dev); /* Disable MSI */
2501 pci_msix_init(dev); /* Disable MSI-X */
2502
2503 /* Buffers for saving PCIe and PCI-X capabilities */
2504 pci_allocate_cap_save_buffers(dev);
2505
2506 pci_pm_init(dev); /* Power Management */
2507 pci_vpd_init(dev); /* Vital Product Data */
2508 pci_configure_ari(dev); /* Alternative Routing-ID Forwarding */
2509 pci_iov_init(dev); /* Single Root I/O Virtualization */
2510 pci_ats_init(dev); /* Address Translation Services */
2511 pci_pri_init(dev); /* Page Request Interface */
2512 pci_pasid_init(dev); /* Process Address Space ID */
2513 pci_acs_init(dev); /* Access Control Services */
2514 pci_ptm_init(dev); /* Precision Time Measurement */
2515 pci_aer_init(dev); /* Advanced Error Reporting */
2516 pci_dpc_init(dev); /* Downstream Port Containment */
2517 pci_rcec_init(dev); /* Root Complex Event Collector */
2518 pci_doe_init(dev); /* Data Object Exchange */
2519 pci_tph_init(dev); /* TLP Processing Hints */
2520
2521 pcie_report_downtraining(dev);
2522 pci_init_reset_methods(dev);
2523}
2524
2525/*
2526 * This is the equivalent of pci_host_bridge_msi_domain() that acts on
2527 * devices. Firmware interfaces that can select the MSI domain on a
2528 * per-device basis should be called from here.
2529 */
2530static struct irq_domain *pci_dev_msi_domain(struct pci_dev *dev)
2531{
2532 struct irq_domain *d;
2533
2534 /*
2535 * If a domain has been set through the pcibios_device_add()
2536 * callback, then this is the one (platform code knows best).
2537 */
2538 d = dev_get_msi_domain(&dev->dev);
2539 if (d)
2540 return d;
2541
2542 /*
2543 * Let's see if we have a firmware interface able to provide
2544 * the domain.
2545 */
2546 d = pci_msi_get_device_domain(dev);
2547 if (d)
2548 return d;
2549
2550 return NULL;
2551}
2552
2553static void pci_set_msi_domain(struct pci_dev *dev)
2554{
2555 struct irq_domain *d;
2556
2557 /*
2558 * If the platform or firmware interfaces cannot supply a
2559 * device-specific MSI domain, then inherit the default domain
2560 * from the host bridge itself.
2561 */
2562 d = pci_dev_msi_domain(dev);
2563 if (!d)
2564 d = dev_get_msi_domain(&dev->bus->dev);
2565
2566 dev_set_msi_domain(&dev->dev, d);
2567}
2568
2569void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
2570{
2571 int ret;
2572
2573 pci_configure_device(dev);
2574
2575 device_initialize(&dev->dev);
2576 dev->dev.release = pci_release_dev;
2577
2578 set_dev_node(&dev->dev, pcibus_to_node(bus));
2579 dev->dev.dma_mask = &dev->dma_mask;
2580 dev->dev.dma_parms = &dev->dma_parms;
2581 dev->dev.coherent_dma_mask = 0xffffffffull;
2582
2583 dma_set_max_seg_size(&dev->dev, 65536);
2584 dma_set_seg_boundary(&dev->dev, 0xffffffff);
2585
2586 pcie_failed_link_retrain(dev);
2587
2588 /* Fix up broken headers */
2589 pci_fixup_device(pci_fixup_header, dev);
2590
2591 pci_reassigndev_resource_alignment(dev);
2592
2593 dev->state_saved = false;
2594
2595 pci_init_capabilities(dev);
2596
2597 /*
2598 * Add the device to our list of discovered devices
2599 * and the bus list for fixup functions, etc.
2600 */
2601 down_write(&pci_bus_sem);
2602 list_add_tail(&dev->bus_list, &bus->devices);
2603 up_write(&pci_bus_sem);
2604
2605 ret = pcibios_device_add(dev);
2606 WARN_ON(ret < 0);
2607
2608 /* Set up MSI IRQ domain */
2609 pci_set_msi_domain(dev);
2610
2611 /* Notifier could use PCI capabilities */
2612 dev->match_driver = false;
2613 ret = device_add(&dev->dev);
2614 WARN_ON(ret < 0);
2615
2616 pci_npem_create(dev);
2617}
2618
2619struct pci_dev *pci_scan_single_device(struct pci_bus *bus, int devfn)
2620{
2621 struct pci_dev *dev;
2622
2623 dev = pci_get_slot(bus, devfn);
2624 if (dev) {
2625 pci_dev_put(dev);
2626 return dev;
2627 }
2628
2629 dev = pci_scan_device(bus, devfn);
2630 if (!dev)
2631 return NULL;
2632
2633 pci_device_add(dev, bus);
2634
2635 return dev;
2636}
2637EXPORT_SYMBOL(pci_scan_single_device);
2638
2639static int next_ari_fn(struct pci_bus *bus, struct pci_dev *dev, int fn)
2640{
2641 int pos;
2642 u16 cap = 0;
2643 unsigned int next_fn;
2644
2645 if (!dev)
2646 return -ENODEV;
2647
2648 pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ARI);
2649 if (!pos)
2650 return -ENODEV;
2651
2652 pci_read_config_word(dev, pos + PCI_ARI_CAP, &cap);
2653 next_fn = PCI_ARI_CAP_NFN(cap);
2654 if (next_fn <= fn)
2655 return -ENODEV; /* protect against malformed list */
2656
2657 return next_fn;
2658}
2659
2660static int next_fn(struct pci_bus *bus, struct pci_dev *dev, int fn)
2661{
2662 if (pci_ari_enabled(bus))
2663 return next_ari_fn(bus, dev, fn);
2664
2665 if (fn >= 7)
2666 return -ENODEV;
2667 /* only multifunction devices may have more functions */
2668 if (dev && !dev->multifunction)
2669 return -ENODEV;
2670
2671 return fn + 1;
2672}
2673
2674static int only_one_child(struct pci_bus *bus)
2675{
2676 struct pci_dev *bridge = bus->self;
2677
2678 /*
2679 * Systems with unusual topologies set PCI_SCAN_ALL_PCIE_DEVS so
2680 * we scan for all possible devices, not just Device 0.
2681 */
2682 if (pci_has_flag(PCI_SCAN_ALL_PCIE_DEVS))
2683 return 0;
2684
2685 /*
2686 * A PCIe Downstream Port normally leads to a Link with only Device
2687 * 0 on it (PCIe spec r3.1, sec 7.3.1). As an optimization, scan
2688 * only for Device 0 in that situation.
2689 */
2690 if (bridge && pci_is_pcie(bridge) && pcie_downstream_port(bridge))
2691 return 1;
2692
2693 return 0;
2694}
2695
2696/**
2697 * pci_scan_slot - Scan a PCI slot on a bus for devices
2698 * @bus: PCI bus to scan
2699 * @devfn: slot number to scan (must have zero function)
2700 *
2701 * Scan a PCI slot on the specified PCI bus for devices, adding
2702 * discovered devices to the @bus->devices list. New devices
2703 * will not have is_added set.
2704 *
2705 * Returns the number of new devices found.
2706 */
2707int pci_scan_slot(struct pci_bus *bus, int devfn)
2708{
2709 struct pci_dev *dev;
2710 int fn = 0, nr = 0;
2711
2712 if (only_one_child(bus) && (devfn > 0))
2713 return 0; /* Already scanned the entire slot */
2714
2715 do {
2716 dev = pci_scan_single_device(bus, devfn + fn);
2717 if (dev) {
2718 if (!pci_dev_is_added(dev))
2719 nr++;
2720 if (fn > 0)
2721 dev->multifunction = 1;
2722 } else if (fn == 0) {
2723 /*
2724 * Function 0 is required unless we are running on
2725 * a hypervisor that passes through individual PCI
2726 * functions.
2727 */
2728 if (!hypervisor_isolated_pci_functions())
2729 break;
2730 }
2731 fn = next_fn(bus, dev, fn);
2732 } while (fn >= 0);
2733
2734 /* Only one slot has PCIe device */
2735 if (bus->self && nr)
2736 pcie_aspm_init_link_state(bus->self);
2737
2738 return nr;
2739}
2740EXPORT_SYMBOL(pci_scan_slot);
2741
2742static int pcie_find_smpss(struct pci_dev *dev, void *data)
2743{
2744 u8 *smpss = data;
2745
2746 if (!pci_is_pcie(dev))
2747 return 0;
2748
2749 /*
2750 * We don't have a way to change MPS settings on devices that have
2751 * drivers attached. A hot-added device might support only the minimum
2752 * MPS setting (MPS=128). Therefore, if the fabric contains a bridge
2753 * where devices may be hot-added, we limit the fabric MPS to 128 so
2754 * hot-added devices will work correctly.
2755 *
2756 * However, if we hot-add a device to a slot directly below a Root
2757 * Port, it's impossible for there to be other existing devices below
2758 * the port. We don't limit the MPS in this case because we can
2759 * reconfigure MPS on both the Root Port and the hot-added device,
2760 * and there are no other devices involved.
2761 *
2762 * Note that this PCIE_BUS_SAFE path assumes no peer-to-peer DMA.
2763 */
2764 if (dev->is_hotplug_bridge &&
2765 pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT)
2766 *smpss = 0;
2767
2768 if (*smpss > dev->pcie_mpss)
2769 *smpss = dev->pcie_mpss;
2770
2771 return 0;
2772}
2773
2774static void pcie_write_mps(struct pci_dev *dev, int mps)
2775{
2776 int rc;
2777
2778 if (pcie_bus_config == PCIE_BUS_PERFORMANCE) {
2779 mps = 128 << dev->pcie_mpss;
2780
2781 if (pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT &&
2782 dev->bus->self)
2783
2784 /*
2785 * For "Performance", the assumption is made that
2786 * downstream communication will never be larger than
2787 * the MRRS. So, the MPS only needs to be configured
2788 * for the upstream communication. This being the case,
2789 * walk from the top down and set the MPS of the child
2790 * to that of the parent bus.
2791 *
2792 * Configure the device MPS with the smaller of the
2793 * device MPSS or the bridge MPS (which is assumed to be
2794 * properly configured at this point to the largest
2795 * allowable MPS based on its parent bus).
2796 */
2797 mps = min(mps, pcie_get_mps(dev->bus->self));
2798 }
2799
2800 rc = pcie_set_mps(dev, mps);
2801 if (rc)
2802 pci_err(dev, "Failed attempting to set the MPS\n");
2803}
2804
2805static void pcie_write_mrrs(struct pci_dev *dev)
2806{
2807 int rc, mrrs;
2808
2809 /*
2810 * In the "safe" case, do not configure the MRRS. There appear to be
2811 * issues with setting MRRS to 0 on a number of devices.
2812 */
2813 if (pcie_bus_config != PCIE_BUS_PERFORMANCE)
2814 return;
2815
2816 /*
2817 * For max performance, the MRRS must be set to the largest supported
2818 * value. However, it cannot be configured larger than the MPS the
2819 * device or the bus can support. This should already be properly
2820 * configured by a prior call to pcie_write_mps().
2821 */
2822 mrrs = pcie_get_mps(dev);
2823
2824 /*
2825 * MRRS is a R/W register. Invalid values can be written, but a
2826 * subsequent read will verify if the value is acceptable or not.
2827 * If the MRRS value provided is not acceptable (e.g., too large),
2828 * shrink the value until it is acceptable to the HW.
2829 */
2830 while (mrrs != pcie_get_readrq(dev) && mrrs >= 128) {
2831 rc = pcie_set_readrq(dev, mrrs);
2832 if (!rc)
2833 break;
2834
2835 pci_warn(dev, "Failed attempting to set the MRRS\n");
2836 mrrs /= 2;
2837 }
2838
2839 if (mrrs < 128)
2840 pci_err(dev, "MRRS was unable to be configured with a safe value. If problems are experienced, try running with pci=pcie_bus_safe\n");
2841}
2842
2843static int pcie_bus_configure_set(struct pci_dev *dev, void *data)
2844{
2845 int mps, orig_mps;
2846
2847 if (!pci_is_pcie(dev))
2848 return 0;
2849
2850 if (pcie_bus_config == PCIE_BUS_TUNE_OFF ||
2851 pcie_bus_config == PCIE_BUS_DEFAULT)
2852 return 0;
2853
2854 mps = 128 << *(u8 *)data;
2855 orig_mps = pcie_get_mps(dev);
2856
2857 pcie_write_mps(dev, mps);
2858 pcie_write_mrrs(dev);
2859
2860 pci_info(dev, "Max Payload Size set to %4d/%4d (was %4d), Max Read Rq %4d\n",
2861 pcie_get_mps(dev), 128 << dev->pcie_mpss,
2862 orig_mps, pcie_get_readrq(dev));
2863
2864 return 0;
2865}
2866
2867/*
2868 * pcie_bus_configure_settings() requires that pci_walk_bus work in a top-down,
2869 * parents then children fashion. If this changes, then this code will not
2870 * work as designed.
2871 */
2872void pcie_bus_configure_settings(struct pci_bus *bus)
2873{
2874 u8 smpss = 0;
2875
2876 if (!bus->self)
2877 return;
2878
2879 if (!pci_is_pcie(bus->self))
2880 return;
2881
2882 /*
2883 * FIXME - Peer to peer DMA is possible, though the endpoint would need
2884 * to be aware of the MPS of the destination. To work around this,
2885 * simply force the MPS of the entire system to the smallest possible.
2886 */
2887 if (pcie_bus_config == PCIE_BUS_PEER2PEER)
2888 smpss = 0;
2889
2890 if (pcie_bus_config == PCIE_BUS_SAFE) {
2891 smpss = bus->self->pcie_mpss;
2892
2893 pcie_find_smpss(bus->self, &smpss);
2894 pci_walk_bus(bus, pcie_find_smpss, &smpss);
2895 }
2896
2897 pcie_bus_configure_set(bus->self, &smpss);
2898 pci_walk_bus(bus, pcie_bus_configure_set, &smpss);
2899}
2900EXPORT_SYMBOL_GPL(pcie_bus_configure_settings);
2901
2902/*
2903 * Called after each bus is probed, but before its children are examined. This
2904 * is marked as __weak because multiple architectures define it.
2905 */
2906void __weak pcibios_fixup_bus(struct pci_bus *bus)
2907{
2908 /* nothing to do, expected to be removed in the future */
2909}
2910
2911/**
2912 * pci_scan_child_bus_extend() - Scan devices below a bus
2913 * @bus: Bus to scan for devices
2914 * @available_buses: Total number of buses available (%0 does not try to
2915 * extend beyond the minimal)
2916 *
2917 * Scans devices below @bus including subordinate buses. Returns new
2918 * subordinate number including all the found devices. Passing
2919 * @available_buses causes the remaining bus space to be distributed
2920 * equally between hotplug-capable bridges to allow future extension of the
2921 * hierarchy.
2922 */
2923static unsigned int pci_scan_child_bus_extend(struct pci_bus *bus,
2924 unsigned int available_buses)
2925{
2926 unsigned int used_buses, normal_bridges = 0, hotplug_bridges = 0;
2927 unsigned int start = bus->busn_res.start;
2928 unsigned int devfn, cmax, max = start;
2929 struct pci_dev *dev;
2930
2931 dev_dbg(&bus->dev, "scanning bus\n");
2932
2933 /* Go find them, Rover! */
2934 for (devfn = 0; devfn < 256; devfn += 8)
2935 pci_scan_slot(bus, devfn);
2936
2937 /* Reserve buses for SR-IOV capability */
2938 used_buses = pci_iov_bus_range(bus);
2939 max += used_buses;
2940
2941 /*
2942 * After performing arch-dependent fixup of the bus, look behind
2943 * all PCI-to-PCI bridges on this bus.
2944 */
2945 if (!bus->is_added) {
2946 dev_dbg(&bus->dev, "fixups for bus\n");
2947 pcibios_fixup_bus(bus);
2948 bus->is_added = 1;
2949 }
2950
2951 /*
2952 * Calculate how many hotplug bridges and normal bridges there
2953 * are on this bus. We will distribute the additional available
2954 * buses between hotplug bridges.
2955 */
2956 for_each_pci_bridge(dev, bus) {
2957 if (dev->is_hotplug_bridge)
2958 hotplug_bridges++;
2959 else
2960 normal_bridges++;
2961 }
2962
2963 /*
2964 * Scan bridges that are already configured. We don't touch them
2965 * unless they are misconfigured (which will be done in the second
2966 * scan below).
2967 */
2968 for_each_pci_bridge(dev, bus) {
2969 cmax = max;
2970 max = pci_scan_bridge_extend(bus, dev, max, 0, 0);
2971
2972 /*
2973 * Reserve one bus for each bridge now to avoid extending
2974 * hotplug bridges too much during the second scan below.
2975 */
2976 used_buses++;
2977 if (max - cmax > 1)
2978 used_buses += max - cmax - 1;
2979 }
2980
2981 /* Scan bridges that need to be reconfigured */
2982 for_each_pci_bridge(dev, bus) {
2983 unsigned int buses = 0;
2984
2985 if (!hotplug_bridges && normal_bridges == 1) {
2986 /*
2987 * There is only one bridge on the bus (upstream
2988 * port) so it gets all available buses which it
2989 * can then distribute to the possible hotplug
2990 * bridges below.
2991 */
2992 buses = available_buses;
2993 } else if (dev->is_hotplug_bridge) {
2994 /*
2995 * Distribute the extra buses between hotplug
2996 * bridges if any.
2997 */
2998 buses = available_buses / hotplug_bridges;
2999 buses = min(buses, available_buses - used_buses + 1);
3000 }
3001
3002 cmax = max;
3003 max = pci_scan_bridge_extend(bus, dev, cmax, buses, 1);
3004 /* One bus is already accounted so don't add it again */
3005 if (max - cmax > 1)
3006 used_buses += max - cmax - 1;
3007 }
3008
3009 /*
3010 * Make sure a hotplug bridge has at least the minimum requested
3011 * number of buses but allow it to grow up to the maximum available
3012 * bus number if there is room.
3013 */
3014 if (bus->self && bus->self->is_hotplug_bridge) {
3015 used_buses = max_t(unsigned int, available_buses,
3016 pci_hotplug_bus_size - 1);
3017 if (max - start < used_buses) {
3018 max = start + used_buses;
3019
3020 /* Do not allocate more buses than we have room left */
3021 if (max > bus->busn_res.end)
3022 max = bus->busn_res.end;
3023
3024 dev_dbg(&bus->dev, "%pR extended by %#02x\n",
3025 &bus->busn_res, max - start);
3026 }
3027 }
3028
3029 /*
3030 * We've scanned the bus and so we know all about what's on
3031 * the other side of any bridges that may be on this bus plus
3032 * any devices.
3033 *
3034 * Return how far we've got finding sub-buses.
3035 */
3036 dev_dbg(&bus->dev, "bus scan returning with max=%02x\n", max);
3037 return max;
3038}
3039
3040/**
3041 * pci_scan_child_bus() - Scan devices below a bus
3042 * @bus: Bus to scan for devices
3043 *
3044 * Scans devices below @bus including subordinate buses. Returns new
3045 * subordinate number including all the found devices.
3046 */
3047unsigned int pci_scan_child_bus(struct pci_bus *bus)
3048{
3049 return pci_scan_child_bus_extend(bus, 0);
3050}
3051EXPORT_SYMBOL_GPL(pci_scan_child_bus);
3052
3053/**
3054 * pcibios_root_bridge_prepare - Platform-specific host bridge setup
3055 * @bridge: Host bridge to set up
3056 *
3057 * Default empty implementation. Replace with an architecture-specific setup
3058 * routine, if necessary.
3059 */
3060int __weak pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
3061{
3062 return 0;
3063}
3064
3065void __weak pcibios_add_bus(struct pci_bus *bus)
3066{
3067}
3068
3069void __weak pcibios_remove_bus(struct pci_bus *bus)
3070{
3071}
3072
3073struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
3074 struct pci_ops *ops, void *sysdata, struct list_head *resources)
3075{
3076 int error;
3077 struct pci_host_bridge *bridge;
3078
3079 bridge = pci_alloc_host_bridge(0);
3080 if (!bridge)
3081 return NULL;
3082
3083 bridge->dev.parent = parent;
3084
3085 list_splice_init(resources, &bridge->windows);
3086 bridge->sysdata = sysdata;
3087 bridge->busnr = bus;
3088 bridge->ops = ops;
3089
3090 error = pci_register_host_bridge(bridge);
3091 if (error < 0)
3092 goto err_out;
3093
3094 return bridge->bus;
3095
3096err_out:
3097 put_device(&bridge->dev);
3098 return NULL;
3099}
3100EXPORT_SYMBOL_GPL(pci_create_root_bus);
3101
3102int pci_host_probe(struct pci_host_bridge *bridge)
3103{
3104 struct pci_bus *bus, *child;
3105 int ret;
3106
3107 pci_lock_rescan_remove();
3108 ret = pci_scan_root_bus_bridge(bridge);
3109 pci_unlock_rescan_remove();
3110 if (ret < 0) {
3111 dev_err(bridge->dev.parent, "Scanning root bridge failed");
3112 return ret;
3113 }
3114
3115 bus = bridge->bus;
3116
3117 /* If we must preserve the resource configuration, claim now */
3118 if (bridge->preserve_config)
3119 pci_bus_claim_resources(bus);
3120
3121 /*
3122 * Assign whatever was left unassigned. If we didn't claim above,
3123 * this will reassign everything.
3124 */
3125 pci_assign_unassigned_root_bus_resources(bus);
3126
3127 list_for_each_entry(child, &bus->children, node)
3128 pcie_bus_configure_settings(child);
3129
3130 pci_lock_rescan_remove();
3131 pci_bus_add_devices(bus);
3132 pci_unlock_rescan_remove();
3133
3134 /*
3135 * Ensure pm_runtime_enable() is called for the controller drivers
3136 * before calling pci_host_probe(). The PM framework expects that
3137 * if the parent device supports runtime PM, it will be enabled
3138 * before child runtime PM is enabled.
3139 */
3140 pm_runtime_set_active(&bridge->dev);
3141 pm_runtime_no_callbacks(&bridge->dev);
3142 devm_pm_runtime_enable(&bridge->dev);
3143
3144 return 0;
3145}
3146EXPORT_SYMBOL_GPL(pci_host_probe);
3147
3148int pci_bus_insert_busn_res(struct pci_bus *b, int bus, int bus_max)
3149{
3150 struct resource *res = &b->busn_res;
3151 struct resource *parent_res, *conflict;
3152
3153 res->start = bus;
3154 res->end = bus_max;
3155 res->flags = IORESOURCE_BUS;
3156
3157 if (!pci_is_root_bus(b))
3158 parent_res = &b->parent->busn_res;
3159 else {
3160 parent_res = get_pci_domain_busn_res(pci_domain_nr(b));
3161 res->flags |= IORESOURCE_PCI_FIXED;
3162 }
3163
3164 conflict = request_resource_conflict(parent_res, res);
3165
3166 if (conflict)
3167 dev_info(&b->dev,
3168 "busn_res: can not insert %pR under %s%pR (conflicts with %s %pR)\n",
3169 res, pci_is_root_bus(b) ? "domain " : "",
3170 parent_res, conflict->name, conflict);
3171
3172 return conflict == NULL;
3173}
3174
3175int pci_bus_update_busn_res_end(struct pci_bus *b, int bus_max)
3176{
3177 struct resource *res = &b->busn_res;
3178 struct resource old_res = *res;
3179 resource_size_t size;
3180 int ret;
3181
3182 if (res->start > bus_max)
3183 return -EINVAL;
3184
3185 size = bus_max - res->start + 1;
3186 ret = adjust_resource(res, res->start, size);
3187 dev_info(&b->dev, "busn_res: %pR end %s updated to %02x\n",
3188 &old_res, ret ? "can not be" : "is", bus_max);
3189
3190 if (!ret && !res->parent)
3191 pci_bus_insert_busn_res(b, res->start, res->end);
3192
3193 return ret;
3194}
3195
3196void pci_bus_release_busn_res(struct pci_bus *b)
3197{
3198 struct resource *res = &b->busn_res;
3199 int ret;
3200
3201 if (!res->flags || !res->parent)
3202 return;
3203
3204 ret = release_resource(res);
3205 dev_info(&b->dev, "busn_res: %pR %s released\n",
3206 res, ret ? "can not be" : "is");
3207}
3208
3209int pci_scan_root_bus_bridge(struct pci_host_bridge *bridge)
3210{
3211 struct resource_entry *window;
3212 bool found = false;
3213 struct pci_bus *b;
3214 int max, bus, ret;
3215
3216 if (!bridge)
3217 return -EINVAL;
3218
3219 resource_list_for_each_entry(window, &bridge->windows)
3220 if (window->res->flags & IORESOURCE_BUS) {
3221 bridge->busnr = window->res->start;
3222 found = true;
3223 break;
3224 }
3225
3226 ret = pci_register_host_bridge(bridge);
3227 if (ret < 0)
3228 return ret;
3229
3230 b = bridge->bus;
3231 bus = bridge->busnr;
3232
3233 if (!found) {
3234 dev_info(&b->dev,
3235 "No busn resource found for root bus, will use [bus %02x-ff]\n",
3236 bus);
3237 pci_bus_insert_busn_res(b, bus, 255);
3238 }
3239
3240 max = pci_scan_child_bus(b);
3241
3242 if (!found)
3243 pci_bus_update_busn_res_end(b, max);
3244
3245 return 0;
3246}
3247EXPORT_SYMBOL(pci_scan_root_bus_bridge);
3248
3249struct pci_bus *pci_scan_root_bus(struct device *parent, int bus,
3250 struct pci_ops *ops, void *sysdata, struct list_head *resources)
3251{
3252 struct resource_entry *window;
3253 bool found = false;
3254 struct pci_bus *b;
3255 int max;
3256
3257 resource_list_for_each_entry(window, resources)
3258 if (window->res->flags & IORESOURCE_BUS) {
3259 found = true;
3260 break;
3261 }
3262
3263 b = pci_create_root_bus(parent, bus, ops, sysdata, resources);
3264 if (!b)
3265 return NULL;
3266
3267 if (!found) {
3268 dev_info(&b->dev,
3269 "No busn resource found for root bus, will use [bus %02x-ff]\n",
3270 bus);
3271 pci_bus_insert_busn_res(b, bus, 255);
3272 }
3273
3274 max = pci_scan_child_bus(b);
3275
3276 if (!found)
3277 pci_bus_update_busn_res_end(b, max);
3278
3279 return b;
3280}
3281EXPORT_SYMBOL(pci_scan_root_bus);
3282
3283struct pci_bus *pci_scan_bus(int bus, struct pci_ops *ops,
3284 void *sysdata)
3285{
3286 LIST_HEAD(resources);
3287 struct pci_bus *b;
3288
3289 pci_add_resource(&resources, &ioport_resource);
3290 pci_add_resource(&resources, &iomem_resource);
3291 pci_add_resource(&resources, &busn_resource);
3292 b = pci_create_root_bus(NULL, bus, ops, sysdata, &resources);
3293 if (b) {
3294 pci_scan_child_bus(b);
3295 } else {
3296 pci_free_resource_list(&resources);
3297 }
3298 return b;
3299}
3300EXPORT_SYMBOL(pci_scan_bus);
3301
3302/**
3303 * pci_rescan_bus_bridge_resize - Scan a PCI bus for devices
3304 * @bridge: PCI bridge for the bus to scan
3305 *
3306 * Scan a PCI bus and child buses for new devices, add them,
3307 * and enable them, resizing bridge mmio/io resource if necessary
3308 * and possible. The caller must ensure the child devices are already
3309 * removed for resizing to occur.
3310 *
3311 * Returns the max number of subordinate bus discovered.
3312 */
3313unsigned int pci_rescan_bus_bridge_resize(struct pci_dev *bridge)
3314{
3315 unsigned int max;
3316 struct pci_bus *bus = bridge->subordinate;
3317
3318 max = pci_scan_child_bus(bus);
3319
3320 pci_assign_unassigned_bridge_resources(bridge);
3321
3322 pci_bus_add_devices(bus);
3323
3324 return max;
3325}
3326
3327/**
3328 * pci_rescan_bus - Scan a PCI bus for devices
3329 * @bus: PCI bus to scan
3330 *
3331 * Scan a PCI bus and child buses for new devices, add them,
3332 * and enable them.
3333 *
3334 * Returns the max number of subordinate bus discovered.
3335 */
3336unsigned int pci_rescan_bus(struct pci_bus *bus)
3337{
3338 unsigned int max;
3339
3340 max = pci_scan_child_bus(bus);
3341 pci_assign_unassigned_bus_resources(bus);
3342 pci_bus_add_devices(bus);
3343
3344 return max;
3345}
3346EXPORT_SYMBOL_GPL(pci_rescan_bus);
3347
3348/*
3349 * pci_rescan_bus(), pci_rescan_bus_bridge_resize() and PCI device removal
3350 * routines should always be executed under this mutex.
3351 */
3352static DEFINE_MUTEX(pci_rescan_remove_lock);
3353
3354void pci_lock_rescan_remove(void)
3355{
3356 mutex_lock(&pci_rescan_remove_lock);
3357}
3358EXPORT_SYMBOL_GPL(pci_lock_rescan_remove);
3359
3360void pci_unlock_rescan_remove(void)
3361{
3362 mutex_unlock(&pci_rescan_remove_lock);
3363}
3364EXPORT_SYMBOL_GPL(pci_unlock_rescan_remove);
3365
3366static int __init pci_sort_bf_cmp(const struct device *d_a,
3367 const struct device *d_b)
3368{
3369 const struct pci_dev *a = to_pci_dev(d_a);
3370 const struct pci_dev *b = to_pci_dev(d_b);
3371
3372 if (pci_domain_nr(a->bus) < pci_domain_nr(b->bus)) return -1;
3373 else if (pci_domain_nr(a->bus) > pci_domain_nr(b->bus)) return 1;
3374
3375 if (a->bus->number < b->bus->number) return -1;
3376 else if (a->bus->number > b->bus->number) return 1;
3377
3378 if (a->devfn < b->devfn) return -1;
3379 else if (a->devfn > b->devfn) return 1;
3380
3381 return 0;
3382}
3383
3384void __init pci_sort_breadthfirst(void)
3385{
3386 bus_sort_breadthfirst(&pci_bus_type, &pci_sort_bf_cmp);
3387}
3388
3389int pci_hp_add_bridge(struct pci_dev *dev)
3390{
3391 struct pci_bus *parent = dev->bus;
3392 int busnr, start = parent->busn_res.start;
3393 unsigned int available_buses = 0;
3394 int end = parent->busn_res.end;
3395
3396 for (busnr = start; busnr <= end; busnr++) {
3397 if (!pci_find_bus(pci_domain_nr(parent), busnr))
3398 break;
3399 }
3400 if (busnr-- > end) {
3401 pci_err(dev, "No bus number available for hot-added bridge\n");
3402 return -1;
3403 }
3404
3405 /* Scan bridges that are already configured */
3406 busnr = pci_scan_bridge(parent, dev, busnr, 0);
3407
3408 /*
3409 * Distribute the available bus numbers between hotplug-capable
3410 * bridges to make extending the chain later possible.
3411 */
3412 available_buses = end - busnr;
3413
3414 /* Scan bridges that need to be reconfigured */
3415 pci_scan_bridge_extend(parent, dev, busnr, available_buses, 1);
3416
3417 if (!dev->subordinate)
3418 return -1;
3419
3420 return 0;
3421}
3422EXPORT_SYMBOL_GPL(pci_hp_add_bridge);