Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright (C) 1992, 1998-2006 Linus Torvalds, Ingo Molnar
4 * Copyright (C) 2005-2006 Thomas Gleixner
5 *
6 * This file contains driver APIs to the irq subsystem.
7 */
8
9#define pr_fmt(fmt) "genirq: " fmt
10
11#include <linux/irq.h>
12#include <linux/kthread.h>
13#include <linux/module.h>
14#include <linux/random.h>
15#include <linux/interrupt.h>
16#include <linux/irqdomain.h>
17#include <linux/slab.h>
18#include <linux/sched.h>
19#include <linux/sched/rt.h>
20#include <linux/sched/task.h>
21#include <uapi/linux/sched/types.h>
22#include <linux/task_work.h>
23
24#include "internals.h"
25
26#if defined(CONFIG_IRQ_FORCED_THREADING) && !defined(CONFIG_PREEMPT_RT)
27__read_mostly bool force_irqthreads;
28EXPORT_SYMBOL_GPL(force_irqthreads);
29
30static int __init setup_forced_irqthreads(char *arg)
31{
32 force_irqthreads = true;
33 return 0;
34}
35early_param("threadirqs", setup_forced_irqthreads);
36#endif
37
38static void __synchronize_hardirq(struct irq_desc *desc, bool sync_chip)
39{
40 struct irq_data *irqd = irq_desc_get_irq_data(desc);
41 bool inprogress;
42
43 do {
44 unsigned long flags;
45
46 /*
47 * Wait until we're out of the critical section. This might
48 * give the wrong answer due to the lack of memory barriers.
49 */
50 while (irqd_irq_inprogress(&desc->irq_data))
51 cpu_relax();
52
53 /* Ok, that indicated we're done: double-check carefully. */
54 raw_spin_lock_irqsave(&desc->lock, flags);
55 inprogress = irqd_irq_inprogress(&desc->irq_data);
56
57 /*
58 * If requested and supported, check at the chip whether it
59 * is in flight at the hardware level, i.e. already pending
60 * in a CPU and waiting for service and acknowledge.
61 */
62 if (!inprogress && sync_chip) {
63 /*
64 * Ignore the return code. inprogress is only updated
65 * when the chip supports it.
66 */
67 __irq_get_irqchip_state(irqd, IRQCHIP_STATE_ACTIVE,
68 &inprogress);
69 }
70 raw_spin_unlock_irqrestore(&desc->lock, flags);
71
72 /* Oops, that failed? */
73 } while (inprogress);
74}
75
76/**
77 * synchronize_hardirq - wait for pending hard IRQ handlers (on other CPUs)
78 * @irq: interrupt number to wait for
79 *
80 * This function waits for any pending hard IRQ handlers for this
81 * interrupt to complete before returning. If you use this
82 * function while holding a resource the IRQ handler may need you
83 * will deadlock. It does not take associated threaded handlers
84 * into account.
85 *
86 * Do not use this for shutdown scenarios where you must be sure
87 * that all parts (hardirq and threaded handler) have completed.
88 *
89 * Returns: false if a threaded handler is active.
90 *
91 * This function may be called - with care - from IRQ context.
92 *
93 * It does not check whether there is an interrupt in flight at the
94 * hardware level, but not serviced yet, as this might deadlock when
95 * called with interrupts disabled and the target CPU of the interrupt
96 * is the current CPU.
97 */
98bool synchronize_hardirq(unsigned int irq)
99{
100 struct irq_desc *desc = irq_to_desc(irq);
101
102 if (desc) {
103 __synchronize_hardirq(desc, false);
104 return !atomic_read(&desc->threads_active);
105 }
106
107 return true;
108}
109EXPORT_SYMBOL(synchronize_hardirq);
110
111/**
112 * synchronize_irq - wait for pending IRQ handlers (on other CPUs)
113 * @irq: interrupt number to wait for
114 *
115 * This function waits for any pending IRQ handlers for this interrupt
116 * to complete before returning. If you use this function while
117 * holding a resource the IRQ handler may need you will deadlock.
118 *
119 * Can only be called from preemptible code as it might sleep when
120 * an interrupt thread is associated to @irq.
121 *
122 * It optionally makes sure (when the irq chip supports that method)
123 * that the interrupt is not pending in any CPU and waiting for
124 * service.
125 */
126void synchronize_irq(unsigned int irq)
127{
128 struct irq_desc *desc = irq_to_desc(irq);
129
130 if (desc) {
131 __synchronize_hardirq(desc, true);
132 /*
133 * We made sure that no hardirq handler is
134 * running. Now verify that no threaded handlers are
135 * active.
136 */
137 wait_event(desc->wait_for_threads,
138 !atomic_read(&desc->threads_active));
139 }
140}
141EXPORT_SYMBOL(synchronize_irq);
142
143#ifdef CONFIG_SMP
144cpumask_var_t irq_default_affinity;
145
146static bool __irq_can_set_affinity(struct irq_desc *desc)
147{
148 if (!desc || !irqd_can_balance(&desc->irq_data) ||
149 !desc->irq_data.chip || !desc->irq_data.chip->irq_set_affinity)
150 return false;
151 return true;
152}
153
154/**
155 * irq_can_set_affinity - Check if the affinity of a given irq can be set
156 * @irq: Interrupt to check
157 *
158 */
159int irq_can_set_affinity(unsigned int irq)
160{
161 return __irq_can_set_affinity(irq_to_desc(irq));
162}
163
164/**
165 * irq_can_set_affinity_usr - Check if affinity of a irq can be set from user space
166 * @irq: Interrupt to check
167 *
168 * Like irq_can_set_affinity() above, but additionally checks for the
169 * AFFINITY_MANAGED flag.
170 */
171bool irq_can_set_affinity_usr(unsigned int irq)
172{
173 struct irq_desc *desc = irq_to_desc(irq);
174
175 return __irq_can_set_affinity(desc) &&
176 !irqd_affinity_is_managed(&desc->irq_data);
177}
178
179/**
180 * irq_set_thread_affinity - Notify irq threads to adjust affinity
181 * @desc: irq descriptor which has affitnity changed
182 *
183 * We just set IRQTF_AFFINITY and delegate the affinity setting
184 * to the interrupt thread itself. We can not call
185 * set_cpus_allowed_ptr() here as we hold desc->lock and this
186 * code can be called from hard interrupt context.
187 */
188void irq_set_thread_affinity(struct irq_desc *desc)
189{
190 struct irqaction *action;
191
192 for_each_action_of_desc(desc, action)
193 if (action->thread)
194 set_bit(IRQTF_AFFINITY, &action->thread_flags);
195}
196
197static void irq_validate_effective_affinity(struct irq_data *data)
198{
199#ifdef CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK
200 const struct cpumask *m = irq_data_get_effective_affinity_mask(data);
201 struct irq_chip *chip = irq_data_get_irq_chip(data);
202
203 if (!cpumask_empty(m))
204 return;
205 pr_warn_once("irq_chip %s did not update eff. affinity mask of irq %u\n",
206 chip->name, data->irq);
207#endif
208}
209
210int irq_do_set_affinity(struct irq_data *data, const struct cpumask *mask,
211 bool force)
212{
213 struct irq_desc *desc = irq_data_to_desc(data);
214 struct irq_chip *chip = irq_data_get_irq_chip(data);
215 int ret;
216
217 if (!chip || !chip->irq_set_affinity)
218 return -EINVAL;
219
220 ret = chip->irq_set_affinity(data, mask, force);
221 switch (ret) {
222 case IRQ_SET_MASK_OK:
223 case IRQ_SET_MASK_OK_DONE:
224 cpumask_copy(desc->irq_common_data.affinity, mask);
225 /* fall through */
226 case IRQ_SET_MASK_OK_NOCOPY:
227 irq_validate_effective_affinity(data);
228 irq_set_thread_affinity(desc);
229 ret = 0;
230 }
231
232 return ret;
233}
234
235#ifdef CONFIG_GENERIC_PENDING_IRQ
236static inline int irq_set_affinity_pending(struct irq_data *data,
237 const struct cpumask *dest)
238{
239 struct irq_desc *desc = irq_data_to_desc(data);
240
241 irqd_set_move_pending(data);
242 irq_copy_pending(desc, dest);
243 return 0;
244}
245#else
246static inline int irq_set_affinity_pending(struct irq_data *data,
247 const struct cpumask *dest)
248{
249 return -EBUSY;
250}
251#endif
252
253static int irq_try_set_affinity(struct irq_data *data,
254 const struct cpumask *dest, bool force)
255{
256 int ret = irq_do_set_affinity(data, dest, force);
257
258 /*
259 * In case that the underlying vector management is busy and the
260 * architecture supports the generic pending mechanism then utilize
261 * this to avoid returning an error to user space.
262 */
263 if (ret == -EBUSY && !force)
264 ret = irq_set_affinity_pending(data, dest);
265 return ret;
266}
267
268int irq_set_affinity_locked(struct irq_data *data, const struct cpumask *mask,
269 bool force)
270{
271 struct irq_chip *chip = irq_data_get_irq_chip(data);
272 struct irq_desc *desc = irq_data_to_desc(data);
273 int ret = 0;
274
275 if (!chip || !chip->irq_set_affinity)
276 return -EINVAL;
277
278 if (irq_can_move_pcntxt(data) && !irqd_is_setaffinity_pending(data)) {
279 ret = irq_try_set_affinity(data, mask, force);
280 } else {
281 irqd_set_move_pending(data);
282 irq_copy_pending(desc, mask);
283 }
284
285 if (desc->affinity_notify) {
286 kref_get(&desc->affinity_notify->kref);
287 schedule_work(&desc->affinity_notify->work);
288 }
289 irqd_set(data, IRQD_AFFINITY_SET);
290
291 return ret;
292}
293
294int __irq_set_affinity(unsigned int irq, const struct cpumask *mask, bool force)
295{
296 struct irq_desc *desc = irq_to_desc(irq);
297 unsigned long flags;
298 int ret;
299
300 if (!desc)
301 return -EINVAL;
302
303 raw_spin_lock_irqsave(&desc->lock, flags);
304 ret = irq_set_affinity_locked(irq_desc_get_irq_data(desc), mask, force);
305 raw_spin_unlock_irqrestore(&desc->lock, flags);
306 return ret;
307}
308
309int irq_set_affinity_hint(unsigned int irq, const struct cpumask *m)
310{
311 unsigned long flags;
312 struct irq_desc *desc = irq_get_desc_lock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
313
314 if (!desc)
315 return -EINVAL;
316 desc->affinity_hint = m;
317 irq_put_desc_unlock(desc, flags);
318 /* set the initial affinity to prevent every interrupt being on CPU0 */
319 if (m)
320 __irq_set_affinity(irq, m, false);
321 return 0;
322}
323EXPORT_SYMBOL_GPL(irq_set_affinity_hint);
324
325static void irq_affinity_notify(struct work_struct *work)
326{
327 struct irq_affinity_notify *notify =
328 container_of(work, struct irq_affinity_notify, work);
329 struct irq_desc *desc = irq_to_desc(notify->irq);
330 cpumask_var_t cpumask;
331 unsigned long flags;
332
333 if (!desc || !alloc_cpumask_var(&cpumask, GFP_KERNEL))
334 goto out;
335
336 raw_spin_lock_irqsave(&desc->lock, flags);
337 if (irq_move_pending(&desc->irq_data))
338 irq_get_pending(cpumask, desc);
339 else
340 cpumask_copy(cpumask, desc->irq_common_data.affinity);
341 raw_spin_unlock_irqrestore(&desc->lock, flags);
342
343 notify->notify(notify, cpumask);
344
345 free_cpumask_var(cpumask);
346out:
347 kref_put(¬ify->kref, notify->release);
348}
349
350/**
351 * irq_set_affinity_notifier - control notification of IRQ affinity changes
352 * @irq: Interrupt for which to enable/disable notification
353 * @notify: Context for notification, or %NULL to disable
354 * notification. Function pointers must be initialised;
355 * the other fields will be initialised by this function.
356 *
357 * Must be called in process context. Notification may only be enabled
358 * after the IRQ is allocated and must be disabled before the IRQ is
359 * freed using free_irq().
360 */
361int
362irq_set_affinity_notifier(unsigned int irq, struct irq_affinity_notify *notify)
363{
364 struct irq_desc *desc = irq_to_desc(irq);
365 struct irq_affinity_notify *old_notify;
366 unsigned long flags;
367
368 /* The release function is promised process context */
369 might_sleep();
370
371 if (!desc || desc->istate & IRQS_NMI)
372 return -EINVAL;
373
374 /* Complete initialisation of *notify */
375 if (notify) {
376 notify->irq = irq;
377 kref_init(¬ify->kref);
378 INIT_WORK(¬ify->work, irq_affinity_notify);
379 }
380
381 raw_spin_lock_irqsave(&desc->lock, flags);
382 old_notify = desc->affinity_notify;
383 desc->affinity_notify = notify;
384 raw_spin_unlock_irqrestore(&desc->lock, flags);
385
386 if (old_notify) {
387 cancel_work_sync(&old_notify->work);
388 kref_put(&old_notify->kref, old_notify->release);
389 }
390
391 return 0;
392}
393EXPORT_SYMBOL_GPL(irq_set_affinity_notifier);
394
395#ifndef CONFIG_AUTO_IRQ_AFFINITY
396/*
397 * Generic version of the affinity autoselector.
398 */
399int irq_setup_affinity(struct irq_desc *desc)
400{
401 struct cpumask *set = irq_default_affinity;
402 int ret, node = irq_desc_get_node(desc);
403 static DEFINE_RAW_SPINLOCK(mask_lock);
404 static struct cpumask mask;
405
406 /* Excludes PER_CPU and NO_BALANCE interrupts */
407 if (!__irq_can_set_affinity(desc))
408 return 0;
409
410 raw_spin_lock(&mask_lock);
411 /*
412 * Preserve the managed affinity setting and a userspace affinity
413 * setup, but make sure that one of the targets is online.
414 */
415 if (irqd_affinity_is_managed(&desc->irq_data) ||
416 irqd_has_set(&desc->irq_data, IRQD_AFFINITY_SET)) {
417 if (cpumask_intersects(desc->irq_common_data.affinity,
418 cpu_online_mask))
419 set = desc->irq_common_data.affinity;
420 else
421 irqd_clear(&desc->irq_data, IRQD_AFFINITY_SET);
422 }
423
424 cpumask_and(&mask, cpu_online_mask, set);
425 if (cpumask_empty(&mask))
426 cpumask_copy(&mask, cpu_online_mask);
427
428 if (node != NUMA_NO_NODE) {
429 const struct cpumask *nodemask = cpumask_of_node(node);
430
431 /* make sure at least one of the cpus in nodemask is online */
432 if (cpumask_intersects(&mask, nodemask))
433 cpumask_and(&mask, &mask, nodemask);
434 }
435 ret = irq_do_set_affinity(&desc->irq_data, &mask, false);
436 raw_spin_unlock(&mask_lock);
437 return ret;
438}
439#else
440/* Wrapper for ALPHA specific affinity selector magic */
441int irq_setup_affinity(struct irq_desc *desc)
442{
443 return irq_select_affinity(irq_desc_get_irq(desc));
444}
445#endif
446
447/*
448 * Called when a bogus affinity is set via /proc/irq
449 */
450int irq_select_affinity_usr(unsigned int irq)
451{
452 struct irq_desc *desc = irq_to_desc(irq);
453 unsigned long flags;
454 int ret;
455
456 raw_spin_lock_irqsave(&desc->lock, flags);
457 ret = irq_setup_affinity(desc);
458 raw_spin_unlock_irqrestore(&desc->lock, flags);
459 return ret;
460}
461#endif
462
463/**
464 * irq_set_vcpu_affinity - Set vcpu affinity for the interrupt
465 * @irq: interrupt number to set affinity
466 * @vcpu_info: vCPU specific data or pointer to a percpu array of vCPU
467 * specific data for percpu_devid interrupts
468 *
469 * This function uses the vCPU specific data to set the vCPU
470 * affinity for an irq. The vCPU specific data is passed from
471 * outside, such as KVM. One example code path is as below:
472 * KVM -> IOMMU -> irq_set_vcpu_affinity().
473 */
474int irq_set_vcpu_affinity(unsigned int irq, void *vcpu_info)
475{
476 unsigned long flags;
477 struct irq_desc *desc = irq_get_desc_lock(irq, &flags, 0);
478 struct irq_data *data;
479 struct irq_chip *chip;
480 int ret = -ENOSYS;
481
482 if (!desc)
483 return -EINVAL;
484
485 data = irq_desc_get_irq_data(desc);
486 do {
487 chip = irq_data_get_irq_chip(data);
488 if (chip && chip->irq_set_vcpu_affinity)
489 break;
490#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
491 data = data->parent_data;
492#else
493 data = NULL;
494#endif
495 } while (data);
496
497 if (data)
498 ret = chip->irq_set_vcpu_affinity(data, vcpu_info);
499 irq_put_desc_unlock(desc, flags);
500
501 return ret;
502}
503EXPORT_SYMBOL_GPL(irq_set_vcpu_affinity);
504
505void __disable_irq(struct irq_desc *desc)
506{
507 if (!desc->depth++)
508 irq_disable(desc);
509}
510
511static int __disable_irq_nosync(unsigned int irq)
512{
513 unsigned long flags;
514 struct irq_desc *desc = irq_get_desc_buslock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
515
516 if (!desc)
517 return -EINVAL;
518 __disable_irq(desc);
519 irq_put_desc_busunlock(desc, flags);
520 return 0;
521}
522
523/**
524 * disable_irq_nosync - disable an irq without waiting
525 * @irq: Interrupt to disable
526 *
527 * Disable the selected interrupt line. Disables and Enables are
528 * nested.
529 * Unlike disable_irq(), this function does not ensure existing
530 * instances of the IRQ handler have completed before returning.
531 *
532 * This function may be called from IRQ context.
533 */
534void disable_irq_nosync(unsigned int irq)
535{
536 __disable_irq_nosync(irq);
537}
538EXPORT_SYMBOL(disable_irq_nosync);
539
540/**
541 * disable_irq - disable an irq and wait for completion
542 * @irq: Interrupt to disable
543 *
544 * Disable the selected interrupt line. Enables and Disables are
545 * nested.
546 * This function waits for any pending IRQ handlers for this interrupt
547 * to complete before returning. If you use this function while
548 * holding a resource the IRQ handler may need you will deadlock.
549 *
550 * This function may be called - with care - from IRQ context.
551 */
552void disable_irq(unsigned int irq)
553{
554 if (!__disable_irq_nosync(irq))
555 synchronize_irq(irq);
556}
557EXPORT_SYMBOL(disable_irq);
558
559/**
560 * disable_hardirq - disables an irq and waits for hardirq completion
561 * @irq: Interrupt to disable
562 *
563 * Disable the selected interrupt line. Enables and Disables are
564 * nested.
565 * This function waits for any pending hard IRQ handlers for this
566 * interrupt to complete before returning. If you use this function while
567 * holding a resource the hard IRQ handler may need you will deadlock.
568 *
569 * When used to optimistically disable an interrupt from atomic context
570 * the return value must be checked.
571 *
572 * Returns: false if a threaded handler is active.
573 *
574 * This function may be called - with care - from IRQ context.
575 */
576bool disable_hardirq(unsigned int irq)
577{
578 if (!__disable_irq_nosync(irq))
579 return synchronize_hardirq(irq);
580
581 return false;
582}
583EXPORT_SYMBOL_GPL(disable_hardirq);
584
585/**
586 * disable_nmi_nosync - disable an nmi without waiting
587 * @irq: Interrupt to disable
588 *
589 * Disable the selected interrupt line. Disables and enables are
590 * nested.
591 * The interrupt to disable must have been requested through request_nmi.
592 * Unlike disable_nmi(), this function does not ensure existing
593 * instances of the IRQ handler have completed before returning.
594 */
595void disable_nmi_nosync(unsigned int irq)
596{
597 disable_irq_nosync(irq);
598}
599
600void __enable_irq(struct irq_desc *desc)
601{
602 switch (desc->depth) {
603 case 0:
604 err_out:
605 WARN(1, KERN_WARNING "Unbalanced enable for IRQ %d\n",
606 irq_desc_get_irq(desc));
607 break;
608 case 1: {
609 if (desc->istate & IRQS_SUSPENDED)
610 goto err_out;
611 /* Prevent probing on this irq: */
612 irq_settings_set_noprobe(desc);
613 /*
614 * Call irq_startup() not irq_enable() here because the
615 * interrupt might be marked NOAUTOEN. So irq_startup()
616 * needs to be invoked when it gets enabled the first
617 * time. If it was already started up, then irq_startup()
618 * will invoke irq_enable() under the hood.
619 */
620 irq_startup(desc, IRQ_RESEND, IRQ_START_FORCE);
621 break;
622 }
623 default:
624 desc->depth--;
625 }
626}
627
628/**
629 * enable_irq - enable handling of an irq
630 * @irq: Interrupt to enable
631 *
632 * Undoes the effect of one call to disable_irq(). If this
633 * matches the last disable, processing of interrupts on this
634 * IRQ line is re-enabled.
635 *
636 * This function may be called from IRQ context only when
637 * desc->irq_data.chip->bus_lock and desc->chip->bus_sync_unlock are NULL !
638 */
639void enable_irq(unsigned int irq)
640{
641 unsigned long flags;
642 struct irq_desc *desc = irq_get_desc_buslock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
643
644 if (!desc)
645 return;
646 if (WARN(!desc->irq_data.chip,
647 KERN_ERR "enable_irq before setup/request_irq: irq %u\n", irq))
648 goto out;
649
650 __enable_irq(desc);
651out:
652 irq_put_desc_busunlock(desc, flags);
653}
654EXPORT_SYMBOL(enable_irq);
655
656/**
657 * enable_nmi - enable handling of an nmi
658 * @irq: Interrupt to enable
659 *
660 * The interrupt to enable must have been requested through request_nmi.
661 * Undoes the effect of one call to disable_nmi(). If this
662 * matches the last disable, processing of interrupts on this
663 * IRQ line is re-enabled.
664 */
665void enable_nmi(unsigned int irq)
666{
667 enable_irq(irq);
668}
669
670static int set_irq_wake_real(unsigned int irq, unsigned int on)
671{
672 struct irq_desc *desc = irq_to_desc(irq);
673 int ret = -ENXIO;
674
675 if (irq_desc_get_chip(desc)->flags & IRQCHIP_SKIP_SET_WAKE)
676 return 0;
677
678 if (desc->irq_data.chip->irq_set_wake)
679 ret = desc->irq_data.chip->irq_set_wake(&desc->irq_data, on);
680
681 return ret;
682}
683
684/**
685 * irq_set_irq_wake - control irq power management wakeup
686 * @irq: interrupt to control
687 * @on: enable/disable power management wakeup
688 *
689 * Enable/disable power management wakeup mode, which is
690 * disabled by default. Enables and disables must match,
691 * just as they match for non-wakeup mode support.
692 *
693 * Wakeup mode lets this IRQ wake the system from sleep
694 * states like "suspend to RAM".
695 */
696int irq_set_irq_wake(unsigned int irq, unsigned int on)
697{
698 unsigned long flags;
699 struct irq_desc *desc = irq_get_desc_buslock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
700 int ret = 0;
701
702 if (!desc)
703 return -EINVAL;
704
705 /* Don't use NMIs as wake up interrupts please */
706 if (desc->istate & IRQS_NMI) {
707 ret = -EINVAL;
708 goto out_unlock;
709 }
710
711 /* wakeup-capable irqs can be shared between drivers that
712 * don't need to have the same sleep mode behaviors.
713 */
714 if (on) {
715 if (desc->wake_depth++ == 0) {
716 ret = set_irq_wake_real(irq, on);
717 if (ret)
718 desc->wake_depth = 0;
719 else
720 irqd_set(&desc->irq_data, IRQD_WAKEUP_STATE);
721 }
722 } else {
723 if (desc->wake_depth == 0) {
724 WARN(1, "Unbalanced IRQ %d wake disable\n", irq);
725 } else if (--desc->wake_depth == 0) {
726 ret = set_irq_wake_real(irq, on);
727 if (ret)
728 desc->wake_depth = 1;
729 else
730 irqd_clear(&desc->irq_data, IRQD_WAKEUP_STATE);
731 }
732 }
733
734out_unlock:
735 irq_put_desc_busunlock(desc, flags);
736 return ret;
737}
738EXPORT_SYMBOL(irq_set_irq_wake);
739
740/*
741 * Internal function that tells the architecture code whether a
742 * particular irq has been exclusively allocated or is available
743 * for driver use.
744 */
745int can_request_irq(unsigned int irq, unsigned long irqflags)
746{
747 unsigned long flags;
748 struct irq_desc *desc = irq_get_desc_lock(irq, &flags, 0);
749 int canrequest = 0;
750
751 if (!desc)
752 return 0;
753
754 if (irq_settings_can_request(desc)) {
755 if (!desc->action ||
756 irqflags & desc->action->flags & IRQF_SHARED)
757 canrequest = 1;
758 }
759 irq_put_desc_unlock(desc, flags);
760 return canrequest;
761}
762
763int __irq_set_trigger(struct irq_desc *desc, unsigned long flags)
764{
765 struct irq_chip *chip = desc->irq_data.chip;
766 int ret, unmask = 0;
767
768 if (!chip || !chip->irq_set_type) {
769 /*
770 * IRQF_TRIGGER_* but the PIC does not support multiple
771 * flow-types?
772 */
773 pr_debug("No set_type function for IRQ %d (%s)\n",
774 irq_desc_get_irq(desc),
775 chip ? (chip->name ? : "unknown") : "unknown");
776 return 0;
777 }
778
779 if (chip->flags & IRQCHIP_SET_TYPE_MASKED) {
780 if (!irqd_irq_masked(&desc->irq_data))
781 mask_irq(desc);
782 if (!irqd_irq_disabled(&desc->irq_data))
783 unmask = 1;
784 }
785
786 /* Mask all flags except trigger mode */
787 flags &= IRQ_TYPE_SENSE_MASK;
788 ret = chip->irq_set_type(&desc->irq_data, flags);
789
790 switch (ret) {
791 case IRQ_SET_MASK_OK:
792 case IRQ_SET_MASK_OK_DONE:
793 irqd_clear(&desc->irq_data, IRQD_TRIGGER_MASK);
794 irqd_set(&desc->irq_data, flags);
795 /* fall through */
796
797 case IRQ_SET_MASK_OK_NOCOPY:
798 flags = irqd_get_trigger_type(&desc->irq_data);
799 irq_settings_set_trigger_mask(desc, flags);
800 irqd_clear(&desc->irq_data, IRQD_LEVEL);
801 irq_settings_clr_level(desc);
802 if (flags & IRQ_TYPE_LEVEL_MASK) {
803 irq_settings_set_level(desc);
804 irqd_set(&desc->irq_data, IRQD_LEVEL);
805 }
806
807 ret = 0;
808 break;
809 default:
810 pr_err("Setting trigger mode %lu for irq %u failed (%pS)\n",
811 flags, irq_desc_get_irq(desc), chip->irq_set_type);
812 }
813 if (unmask)
814 unmask_irq(desc);
815 return ret;
816}
817
818#ifdef CONFIG_HARDIRQS_SW_RESEND
819int irq_set_parent(int irq, int parent_irq)
820{
821 unsigned long flags;
822 struct irq_desc *desc = irq_get_desc_lock(irq, &flags, 0);
823
824 if (!desc)
825 return -EINVAL;
826
827 desc->parent_irq = parent_irq;
828
829 irq_put_desc_unlock(desc, flags);
830 return 0;
831}
832EXPORT_SYMBOL_GPL(irq_set_parent);
833#endif
834
835/*
836 * Default primary interrupt handler for threaded interrupts. Is
837 * assigned as primary handler when request_threaded_irq is called
838 * with handler == NULL. Useful for oneshot interrupts.
839 */
840static irqreturn_t irq_default_primary_handler(int irq, void *dev_id)
841{
842 return IRQ_WAKE_THREAD;
843}
844
845/*
846 * Primary handler for nested threaded interrupts. Should never be
847 * called.
848 */
849static irqreturn_t irq_nested_primary_handler(int irq, void *dev_id)
850{
851 WARN(1, "Primary handler called for nested irq %d\n", irq);
852 return IRQ_NONE;
853}
854
855static irqreturn_t irq_forced_secondary_handler(int irq, void *dev_id)
856{
857 WARN(1, "Secondary action handler called for irq %d\n", irq);
858 return IRQ_NONE;
859}
860
861static int irq_wait_for_interrupt(struct irqaction *action)
862{
863 for (;;) {
864 set_current_state(TASK_INTERRUPTIBLE);
865
866 if (kthread_should_stop()) {
867 /* may need to run one last time */
868 if (test_and_clear_bit(IRQTF_RUNTHREAD,
869 &action->thread_flags)) {
870 __set_current_state(TASK_RUNNING);
871 return 0;
872 }
873 __set_current_state(TASK_RUNNING);
874 return -1;
875 }
876
877 if (test_and_clear_bit(IRQTF_RUNTHREAD,
878 &action->thread_flags)) {
879 __set_current_state(TASK_RUNNING);
880 return 0;
881 }
882 schedule();
883 }
884}
885
886/*
887 * Oneshot interrupts keep the irq line masked until the threaded
888 * handler finished. unmask if the interrupt has not been disabled and
889 * is marked MASKED.
890 */
891static void irq_finalize_oneshot(struct irq_desc *desc,
892 struct irqaction *action)
893{
894 if (!(desc->istate & IRQS_ONESHOT) ||
895 action->handler == irq_forced_secondary_handler)
896 return;
897again:
898 chip_bus_lock(desc);
899 raw_spin_lock_irq(&desc->lock);
900
901 /*
902 * Implausible though it may be we need to protect us against
903 * the following scenario:
904 *
905 * The thread is faster done than the hard interrupt handler
906 * on the other CPU. If we unmask the irq line then the
907 * interrupt can come in again and masks the line, leaves due
908 * to IRQS_INPROGRESS and the irq line is masked forever.
909 *
910 * This also serializes the state of shared oneshot handlers
911 * versus "desc->threads_onehsot |= action->thread_mask;" in
912 * irq_wake_thread(). See the comment there which explains the
913 * serialization.
914 */
915 if (unlikely(irqd_irq_inprogress(&desc->irq_data))) {
916 raw_spin_unlock_irq(&desc->lock);
917 chip_bus_sync_unlock(desc);
918 cpu_relax();
919 goto again;
920 }
921
922 /*
923 * Now check again, whether the thread should run. Otherwise
924 * we would clear the threads_oneshot bit of this thread which
925 * was just set.
926 */
927 if (test_bit(IRQTF_RUNTHREAD, &action->thread_flags))
928 goto out_unlock;
929
930 desc->threads_oneshot &= ~action->thread_mask;
931
932 if (!desc->threads_oneshot && !irqd_irq_disabled(&desc->irq_data) &&
933 irqd_irq_masked(&desc->irq_data))
934 unmask_threaded_irq(desc);
935
936out_unlock:
937 raw_spin_unlock_irq(&desc->lock);
938 chip_bus_sync_unlock(desc);
939}
940
941#ifdef CONFIG_SMP
942/*
943 * Check whether we need to change the affinity of the interrupt thread.
944 */
945static void
946irq_thread_check_affinity(struct irq_desc *desc, struct irqaction *action)
947{
948 cpumask_var_t mask;
949 bool valid = true;
950
951 if (!test_and_clear_bit(IRQTF_AFFINITY, &action->thread_flags))
952 return;
953
954 /*
955 * In case we are out of memory we set IRQTF_AFFINITY again and
956 * try again next time
957 */
958 if (!alloc_cpumask_var(&mask, GFP_KERNEL)) {
959 set_bit(IRQTF_AFFINITY, &action->thread_flags);
960 return;
961 }
962
963 raw_spin_lock_irq(&desc->lock);
964 /*
965 * This code is triggered unconditionally. Check the affinity
966 * mask pointer. For CPU_MASK_OFFSTACK=n this is optimized out.
967 */
968 if (cpumask_available(desc->irq_common_data.affinity)) {
969 const struct cpumask *m;
970
971 m = irq_data_get_effective_affinity_mask(&desc->irq_data);
972 cpumask_copy(mask, m);
973 } else {
974 valid = false;
975 }
976 raw_spin_unlock_irq(&desc->lock);
977
978 if (valid)
979 set_cpus_allowed_ptr(current, mask);
980 free_cpumask_var(mask);
981}
982#else
983static inline void
984irq_thread_check_affinity(struct irq_desc *desc, struct irqaction *action) { }
985#endif
986
987/*
988 * Interrupts which are not explicitly requested as threaded
989 * interrupts rely on the implicit bh/preempt disable of the hard irq
990 * context. So we need to disable bh here to avoid deadlocks and other
991 * side effects.
992 */
993static irqreturn_t
994irq_forced_thread_fn(struct irq_desc *desc, struct irqaction *action)
995{
996 irqreturn_t ret;
997
998 local_bh_disable();
999 ret = action->thread_fn(action->irq, action->dev_id);
1000 if (ret == IRQ_HANDLED)
1001 atomic_inc(&desc->threads_handled);
1002
1003 irq_finalize_oneshot(desc, action);
1004 local_bh_enable();
1005 return ret;
1006}
1007
1008/*
1009 * Interrupts explicitly requested as threaded interrupts want to be
1010 * preemtible - many of them need to sleep and wait for slow busses to
1011 * complete.
1012 */
1013static irqreturn_t irq_thread_fn(struct irq_desc *desc,
1014 struct irqaction *action)
1015{
1016 irqreturn_t ret;
1017
1018 ret = action->thread_fn(action->irq, action->dev_id);
1019 if (ret == IRQ_HANDLED)
1020 atomic_inc(&desc->threads_handled);
1021
1022 irq_finalize_oneshot(desc, action);
1023 return ret;
1024}
1025
1026static void wake_threads_waitq(struct irq_desc *desc)
1027{
1028 if (atomic_dec_and_test(&desc->threads_active))
1029 wake_up(&desc->wait_for_threads);
1030}
1031
1032static void irq_thread_dtor(struct callback_head *unused)
1033{
1034 struct task_struct *tsk = current;
1035 struct irq_desc *desc;
1036 struct irqaction *action;
1037
1038 if (WARN_ON_ONCE(!(current->flags & PF_EXITING)))
1039 return;
1040
1041 action = kthread_data(tsk);
1042
1043 pr_err("exiting task \"%s\" (%d) is an active IRQ thread (irq %d)\n",
1044 tsk->comm, tsk->pid, action->irq);
1045
1046
1047 desc = irq_to_desc(action->irq);
1048 /*
1049 * If IRQTF_RUNTHREAD is set, we need to decrement
1050 * desc->threads_active and wake possible waiters.
1051 */
1052 if (test_and_clear_bit(IRQTF_RUNTHREAD, &action->thread_flags))
1053 wake_threads_waitq(desc);
1054
1055 /* Prevent a stale desc->threads_oneshot */
1056 irq_finalize_oneshot(desc, action);
1057}
1058
1059static void irq_wake_secondary(struct irq_desc *desc, struct irqaction *action)
1060{
1061 struct irqaction *secondary = action->secondary;
1062
1063 if (WARN_ON_ONCE(!secondary))
1064 return;
1065
1066 raw_spin_lock_irq(&desc->lock);
1067 __irq_wake_thread(desc, secondary);
1068 raw_spin_unlock_irq(&desc->lock);
1069}
1070
1071/*
1072 * Interrupt handler thread
1073 */
1074static int irq_thread(void *data)
1075{
1076 struct callback_head on_exit_work;
1077 struct irqaction *action = data;
1078 struct irq_desc *desc = irq_to_desc(action->irq);
1079 irqreturn_t (*handler_fn)(struct irq_desc *desc,
1080 struct irqaction *action);
1081
1082 if (force_irqthreads && test_bit(IRQTF_FORCED_THREAD,
1083 &action->thread_flags))
1084 handler_fn = irq_forced_thread_fn;
1085 else
1086 handler_fn = irq_thread_fn;
1087
1088 init_task_work(&on_exit_work, irq_thread_dtor);
1089 task_work_add(current, &on_exit_work, false);
1090
1091 irq_thread_check_affinity(desc, action);
1092
1093 while (!irq_wait_for_interrupt(action)) {
1094 irqreturn_t action_ret;
1095
1096 irq_thread_check_affinity(desc, action);
1097
1098 action_ret = handler_fn(desc, action);
1099 if (action_ret == IRQ_WAKE_THREAD)
1100 irq_wake_secondary(desc, action);
1101
1102 wake_threads_waitq(desc);
1103 }
1104
1105 /*
1106 * This is the regular exit path. __free_irq() is stopping the
1107 * thread via kthread_stop() after calling
1108 * synchronize_hardirq(). So neither IRQTF_RUNTHREAD nor the
1109 * oneshot mask bit can be set.
1110 */
1111 task_work_cancel(current, irq_thread_dtor);
1112 return 0;
1113}
1114
1115/**
1116 * irq_wake_thread - wake the irq thread for the action identified by dev_id
1117 * @irq: Interrupt line
1118 * @dev_id: Device identity for which the thread should be woken
1119 *
1120 */
1121void irq_wake_thread(unsigned int irq, void *dev_id)
1122{
1123 struct irq_desc *desc = irq_to_desc(irq);
1124 struct irqaction *action;
1125 unsigned long flags;
1126
1127 if (!desc || WARN_ON(irq_settings_is_per_cpu_devid(desc)))
1128 return;
1129
1130 raw_spin_lock_irqsave(&desc->lock, flags);
1131 for_each_action_of_desc(desc, action) {
1132 if (action->dev_id == dev_id) {
1133 if (action->thread)
1134 __irq_wake_thread(desc, action);
1135 break;
1136 }
1137 }
1138 raw_spin_unlock_irqrestore(&desc->lock, flags);
1139}
1140EXPORT_SYMBOL_GPL(irq_wake_thread);
1141
1142static int irq_setup_forced_threading(struct irqaction *new)
1143{
1144 if (!force_irqthreads)
1145 return 0;
1146 if (new->flags & (IRQF_NO_THREAD | IRQF_PERCPU | IRQF_ONESHOT))
1147 return 0;
1148
1149 /*
1150 * No further action required for interrupts which are requested as
1151 * threaded interrupts already
1152 */
1153 if (new->handler == irq_default_primary_handler)
1154 return 0;
1155
1156 new->flags |= IRQF_ONESHOT;
1157
1158 /*
1159 * Handle the case where we have a real primary handler and a
1160 * thread handler. We force thread them as well by creating a
1161 * secondary action.
1162 */
1163 if (new->handler && new->thread_fn) {
1164 /* Allocate the secondary action */
1165 new->secondary = kzalloc(sizeof(struct irqaction), GFP_KERNEL);
1166 if (!new->secondary)
1167 return -ENOMEM;
1168 new->secondary->handler = irq_forced_secondary_handler;
1169 new->secondary->thread_fn = new->thread_fn;
1170 new->secondary->dev_id = new->dev_id;
1171 new->secondary->irq = new->irq;
1172 new->secondary->name = new->name;
1173 }
1174 /* Deal with the primary handler */
1175 set_bit(IRQTF_FORCED_THREAD, &new->thread_flags);
1176 new->thread_fn = new->handler;
1177 new->handler = irq_default_primary_handler;
1178 return 0;
1179}
1180
1181static int irq_request_resources(struct irq_desc *desc)
1182{
1183 struct irq_data *d = &desc->irq_data;
1184 struct irq_chip *c = d->chip;
1185
1186 return c->irq_request_resources ? c->irq_request_resources(d) : 0;
1187}
1188
1189static void irq_release_resources(struct irq_desc *desc)
1190{
1191 struct irq_data *d = &desc->irq_data;
1192 struct irq_chip *c = d->chip;
1193
1194 if (c->irq_release_resources)
1195 c->irq_release_resources(d);
1196}
1197
1198static bool irq_supports_nmi(struct irq_desc *desc)
1199{
1200 struct irq_data *d = irq_desc_get_irq_data(desc);
1201
1202#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
1203 /* Only IRQs directly managed by the root irqchip can be set as NMI */
1204 if (d->parent_data)
1205 return false;
1206#endif
1207 /* Don't support NMIs for chips behind a slow bus */
1208 if (d->chip->irq_bus_lock || d->chip->irq_bus_sync_unlock)
1209 return false;
1210
1211 return d->chip->flags & IRQCHIP_SUPPORTS_NMI;
1212}
1213
1214static int irq_nmi_setup(struct irq_desc *desc)
1215{
1216 struct irq_data *d = irq_desc_get_irq_data(desc);
1217 struct irq_chip *c = d->chip;
1218
1219 return c->irq_nmi_setup ? c->irq_nmi_setup(d) : -EINVAL;
1220}
1221
1222static void irq_nmi_teardown(struct irq_desc *desc)
1223{
1224 struct irq_data *d = irq_desc_get_irq_data(desc);
1225 struct irq_chip *c = d->chip;
1226
1227 if (c->irq_nmi_teardown)
1228 c->irq_nmi_teardown(d);
1229}
1230
1231static int
1232setup_irq_thread(struct irqaction *new, unsigned int irq, bool secondary)
1233{
1234 struct task_struct *t;
1235 struct sched_param param = {
1236 .sched_priority = MAX_USER_RT_PRIO/2,
1237 };
1238
1239 if (!secondary) {
1240 t = kthread_create(irq_thread, new, "irq/%d-%s", irq,
1241 new->name);
1242 } else {
1243 t = kthread_create(irq_thread, new, "irq/%d-s-%s", irq,
1244 new->name);
1245 param.sched_priority -= 1;
1246 }
1247
1248 if (IS_ERR(t))
1249 return PTR_ERR(t);
1250
1251 sched_setscheduler_nocheck(t, SCHED_FIFO, ¶m);
1252
1253 /*
1254 * We keep the reference to the task struct even if
1255 * the thread dies to avoid that the interrupt code
1256 * references an already freed task_struct.
1257 */
1258 new->thread = get_task_struct(t);
1259 /*
1260 * Tell the thread to set its affinity. This is
1261 * important for shared interrupt handlers as we do
1262 * not invoke setup_affinity() for the secondary
1263 * handlers as everything is already set up. Even for
1264 * interrupts marked with IRQF_NO_BALANCE this is
1265 * correct as we want the thread to move to the cpu(s)
1266 * on which the requesting code placed the interrupt.
1267 */
1268 set_bit(IRQTF_AFFINITY, &new->thread_flags);
1269 return 0;
1270}
1271
1272/*
1273 * Internal function to register an irqaction - typically used to
1274 * allocate special interrupts that are part of the architecture.
1275 *
1276 * Locking rules:
1277 *
1278 * desc->request_mutex Provides serialization against a concurrent free_irq()
1279 * chip_bus_lock Provides serialization for slow bus operations
1280 * desc->lock Provides serialization against hard interrupts
1281 *
1282 * chip_bus_lock and desc->lock are sufficient for all other management and
1283 * interrupt related functions. desc->request_mutex solely serializes
1284 * request/free_irq().
1285 */
1286static int
1287__setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new)
1288{
1289 struct irqaction *old, **old_ptr;
1290 unsigned long flags, thread_mask = 0;
1291 int ret, nested, shared = 0;
1292
1293 if (!desc)
1294 return -EINVAL;
1295
1296 if (desc->irq_data.chip == &no_irq_chip)
1297 return -ENOSYS;
1298 if (!try_module_get(desc->owner))
1299 return -ENODEV;
1300
1301 new->irq = irq;
1302
1303 /*
1304 * If the trigger type is not specified by the caller,
1305 * then use the default for this interrupt.
1306 */
1307 if (!(new->flags & IRQF_TRIGGER_MASK))
1308 new->flags |= irqd_get_trigger_type(&desc->irq_data);
1309
1310 /*
1311 * Check whether the interrupt nests into another interrupt
1312 * thread.
1313 */
1314 nested = irq_settings_is_nested_thread(desc);
1315 if (nested) {
1316 if (!new->thread_fn) {
1317 ret = -EINVAL;
1318 goto out_mput;
1319 }
1320 /*
1321 * Replace the primary handler which was provided from
1322 * the driver for non nested interrupt handling by the
1323 * dummy function which warns when called.
1324 */
1325 new->handler = irq_nested_primary_handler;
1326 } else {
1327 if (irq_settings_can_thread(desc)) {
1328 ret = irq_setup_forced_threading(new);
1329 if (ret)
1330 goto out_mput;
1331 }
1332 }
1333
1334 /*
1335 * Create a handler thread when a thread function is supplied
1336 * and the interrupt does not nest into another interrupt
1337 * thread.
1338 */
1339 if (new->thread_fn && !nested) {
1340 ret = setup_irq_thread(new, irq, false);
1341 if (ret)
1342 goto out_mput;
1343 if (new->secondary) {
1344 ret = setup_irq_thread(new->secondary, irq, true);
1345 if (ret)
1346 goto out_thread;
1347 }
1348 }
1349
1350 /*
1351 * Drivers are often written to work w/o knowledge about the
1352 * underlying irq chip implementation, so a request for a
1353 * threaded irq without a primary hard irq context handler
1354 * requires the ONESHOT flag to be set. Some irq chips like
1355 * MSI based interrupts are per se one shot safe. Check the
1356 * chip flags, so we can avoid the unmask dance at the end of
1357 * the threaded handler for those.
1358 */
1359 if (desc->irq_data.chip->flags & IRQCHIP_ONESHOT_SAFE)
1360 new->flags &= ~IRQF_ONESHOT;
1361
1362 /*
1363 * Protects against a concurrent __free_irq() call which might wait
1364 * for synchronize_hardirq() to complete without holding the optional
1365 * chip bus lock and desc->lock. Also protects against handing out
1366 * a recycled oneshot thread_mask bit while it's still in use by
1367 * its previous owner.
1368 */
1369 mutex_lock(&desc->request_mutex);
1370
1371 /*
1372 * Acquire bus lock as the irq_request_resources() callback below
1373 * might rely on the serialization or the magic power management
1374 * functions which are abusing the irq_bus_lock() callback,
1375 */
1376 chip_bus_lock(desc);
1377
1378 /* First installed action requests resources. */
1379 if (!desc->action) {
1380 ret = irq_request_resources(desc);
1381 if (ret) {
1382 pr_err("Failed to request resources for %s (irq %d) on irqchip %s\n",
1383 new->name, irq, desc->irq_data.chip->name);
1384 goto out_bus_unlock;
1385 }
1386 }
1387
1388 /*
1389 * The following block of code has to be executed atomically
1390 * protected against a concurrent interrupt and any of the other
1391 * management calls which are not serialized via
1392 * desc->request_mutex or the optional bus lock.
1393 */
1394 raw_spin_lock_irqsave(&desc->lock, flags);
1395 old_ptr = &desc->action;
1396 old = *old_ptr;
1397 if (old) {
1398 /*
1399 * Can't share interrupts unless both agree to and are
1400 * the same type (level, edge, polarity). So both flag
1401 * fields must have IRQF_SHARED set and the bits which
1402 * set the trigger type must match. Also all must
1403 * agree on ONESHOT.
1404 * Interrupt lines used for NMIs cannot be shared.
1405 */
1406 unsigned int oldtype;
1407
1408 if (desc->istate & IRQS_NMI) {
1409 pr_err("Invalid attempt to share NMI for %s (irq %d) on irqchip %s.\n",
1410 new->name, irq, desc->irq_data.chip->name);
1411 ret = -EINVAL;
1412 goto out_unlock;
1413 }
1414
1415 /*
1416 * If nobody did set the configuration before, inherit
1417 * the one provided by the requester.
1418 */
1419 if (irqd_trigger_type_was_set(&desc->irq_data)) {
1420 oldtype = irqd_get_trigger_type(&desc->irq_data);
1421 } else {
1422 oldtype = new->flags & IRQF_TRIGGER_MASK;
1423 irqd_set_trigger_type(&desc->irq_data, oldtype);
1424 }
1425
1426 if (!((old->flags & new->flags) & IRQF_SHARED) ||
1427 (oldtype != (new->flags & IRQF_TRIGGER_MASK)) ||
1428 ((old->flags ^ new->flags) & IRQF_ONESHOT))
1429 goto mismatch;
1430
1431 /* All handlers must agree on per-cpuness */
1432 if ((old->flags & IRQF_PERCPU) !=
1433 (new->flags & IRQF_PERCPU))
1434 goto mismatch;
1435
1436 /* add new interrupt at end of irq queue */
1437 do {
1438 /*
1439 * Or all existing action->thread_mask bits,
1440 * so we can find the next zero bit for this
1441 * new action.
1442 */
1443 thread_mask |= old->thread_mask;
1444 old_ptr = &old->next;
1445 old = *old_ptr;
1446 } while (old);
1447 shared = 1;
1448 }
1449
1450 /*
1451 * Setup the thread mask for this irqaction for ONESHOT. For
1452 * !ONESHOT irqs the thread mask is 0 so we can avoid a
1453 * conditional in irq_wake_thread().
1454 */
1455 if (new->flags & IRQF_ONESHOT) {
1456 /*
1457 * Unlikely to have 32 resp 64 irqs sharing one line,
1458 * but who knows.
1459 */
1460 if (thread_mask == ~0UL) {
1461 ret = -EBUSY;
1462 goto out_unlock;
1463 }
1464 /*
1465 * The thread_mask for the action is or'ed to
1466 * desc->thread_active to indicate that the
1467 * IRQF_ONESHOT thread handler has been woken, but not
1468 * yet finished. The bit is cleared when a thread
1469 * completes. When all threads of a shared interrupt
1470 * line have completed desc->threads_active becomes
1471 * zero and the interrupt line is unmasked. See
1472 * handle.c:irq_wake_thread() for further information.
1473 *
1474 * If no thread is woken by primary (hard irq context)
1475 * interrupt handlers, then desc->threads_active is
1476 * also checked for zero to unmask the irq line in the
1477 * affected hard irq flow handlers
1478 * (handle_[fasteoi|level]_irq).
1479 *
1480 * The new action gets the first zero bit of
1481 * thread_mask assigned. See the loop above which or's
1482 * all existing action->thread_mask bits.
1483 */
1484 new->thread_mask = 1UL << ffz(thread_mask);
1485
1486 } else if (new->handler == irq_default_primary_handler &&
1487 !(desc->irq_data.chip->flags & IRQCHIP_ONESHOT_SAFE)) {
1488 /*
1489 * The interrupt was requested with handler = NULL, so
1490 * we use the default primary handler for it. But it
1491 * does not have the oneshot flag set. In combination
1492 * with level interrupts this is deadly, because the
1493 * default primary handler just wakes the thread, then
1494 * the irq lines is reenabled, but the device still
1495 * has the level irq asserted. Rinse and repeat....
1496 *
1497 * While this works for edge type interrupts, we play
1498 * it safe and reject unconditionally because we can't
1499 * say for sure which type this interrupt really
1500 * has. The type flags are unreliable as the
1501 * underlying chip implementation can override them.
1502 */
1503 pr_err("Threaded irq requested with handler=NULL and !ONESHOT for irq %d\n",
1504 irq);
1505 ret = -EINVAL;
1506 goto out_unlock;
1507 }
1508
1509 if (!shared) {
1510 init_waitqueue_head(&desc->wait_for_threads);
1511
1512 /* Setup the type (level, edge polarity) if configured: */
1513 if (new->flags & IRQF_TRIGGER_MASK) {
1514 ret = __irq_set_trigger(desc,
1515 new->flags & IRQF_TRIGGER_MASK);
1516
1517 if (ret)
1518 goto out_unlock;
1519 }
1520
1521 /*
1522 * Activate the interrupt. That activation must happen
1523 * independently of IRQ_NOAUTOEN. request_irq() can fail
1524 * and the callers are supposed to handle
1525 * that. enable_irq() of an interrupt requested with
1526 * IRQ_NOAUTOEN is not supposed to fail. The activation
1527 * keeps it in shutdown mode, it merily associates
1528 * resources if necessary and if that's not possible it
1529 * fails. Interrupts which are in managed shutdown mode
1530 * will simply ignore that activation request.
1531 */
1532 ret = irq_activate(desc);
1533 if (ret)
1534 goto out_unlock;
1535
1536 desc->istate &= ~(IRQS_AUTODETECT | IRQS_SPURIOUS_DISABLED | \
1537 IRQS_ONESHOT | IRQS_WAITING);
1538 irqd_clear(&desc->irq_data, IRQD_IRQ_INPROGRESS);
1539
1540 if (new->flags & IRQF_PERCPU) {
1541 irqd_set(&desc->irq_data, IRQD_PER_CPU);
1542 irq_settings_set_per_cpu(desc);
1543 }
1544
1545 if (new->flags & IRQF_ONESHOT)
1546 desc->istate |= IRQS_ONESHOT;
1547
1548 /* Exclude IRQ from balancing if requested */
1549 if (new->flags & IRQF_NOBALANCING) {
1550 irq_settings_set_no_balancing(desc);
1551 irqd_set(&desc->irq_data, IRQD_NO_BALANCING);
1552 }
1553
1554 if (irq_settings_can_autoenable(desc)) {
1555 irq_startup(desc, IRQ_RESEND, IRQ_START_COND);
1556 } else {
1557 /*
1558 * Shared interrupts do not go well with disabling
1559 * auto enable. The sharing interrupt might request
1560 * it while it's still disabled and then wait for
1561 * interrupts forever.
1562 */
1563 WARN_ON_ONCE(new->flags & IRQF_SHARED);
1564 /* Undo nested disables: */
1565 desc->depth = 1;
1566 }
1567
1568 } else if (new->flags & IRQF_TRIGGER_MASK) {
1569 unsigned int nmsk = new->flags & IRQF_TRIGGER_MASK;
1570 unsigned int omsk = irqd_get_trigger_type(&desc->irq_data);
1571
1572 if (nmsk != omsk)
1573 /* hope the handler works with current trigger mode */
1574 pr_warn("irq %d uses trigger mode %u; requested %u\n",
1575 irq, omsk, nmsk);
1576 }
1577
1578 *old_ptr = new;
1579
1580 irq_pm_install_action(desc, new);
1581
1582 /* Reset broken irq detection when installing new handler */
1583 desc->irq_count = 0;
1584 desc->irqs_unhandled = 0;
1585
1586 /*
1587 * Check whether we disabled the irq via the spurious handler
1588 * before. Reenable it and give it another chance.
1589 */
1590 if (shared && (desc->istate & IRQS_SPURIOUS_DISABLED)) {
1591 desc->istate &= ~IRQS_SPURIOUS_DISABLED;
1592 __enable_irq(desc);
1593 }
1594
1595 raw_spin_unlock_irqrestore(&desc->lock, flags);
1596 chip_bus_sync_unlock(desc);
1597 mutex_unlock(&desc->request_mutex);
1598
1599 irq_setup_timings(desc, new);
1600
1601 /*
1602 * Strictly no need to wake it up, but hung_task complains
1603 * when no hard interrupt wakes the thread up.
1604 */
1605 if (new->thread)
1606 wake_up_process(new->thread);
1607 if (new->secondary)
1608 wake_up_process(new->secondary->thread);
1609
1610 register_irq_proc(irq, desc);
1611 new->dir = NULL;
1612 register_handler_proc(irq, new);
1613 return 0;
1614
1615mismatch:
1616 if (!(new->flags & IRQF_PROBE_SHARED)) {
1617 pr_err("Flags mismatch irq %d. %08x (%s) vs. %08x (%s)\n",
1618 irq, new->flags, new->name, old->flags, old->name);
1619#ifdef CONFIG_DEBUG_SHIRQ
1620 dump_stack();
1621#endif
1622 }
1623 ret = -EBUSY;
1624
1625out_unlock:
1626 raw_spin_unlock_irqrestore(&desc->lock, flags);
1627
1628 if (!desc->action)
1629 irq_release_resources(desc);
1630out_bus_unlock:
1631 chip_bus_sync_unlock(desc);
1632 mutex_unlock(&desc->request_mutex);
1633
1634out_thread:
1635 if (new->thread) {
1636 struct task_struct *t = new->thread;
1637
1638 new->thread = NULL;
1639 kthread_stop(t);
1640 put_task_struct(t);
1641 }
1642 if (new->secondary && new->secondary->thread) {
1643 struct task_struct *t = new->secondary->thread;
1644
1645 new->secondary->thread = NULL;
1646 kthread_stop(t);
1647 put_task_struct(t);
1648 }
1649out_mput:
1650 module_put(desc->owner);
1651 return ret;
1652}
1653
1654/**
1655 * setup_irq - setup an interrupt
1656 * @irq: Interrupt line to setup
1657 * @act: irqaction for the interrupt
1658 *
1659 * Used to statically setup interrupts in the early boot process.
1660 */
1661int setup_irq(unsigned int irq, struct irqaction *act)
1662{
1663 int retval;
1664 struct irq_desc *desc = irq_to_desc(irq);
1665
1666 if (!desc || WARN_ON(irq_settings_is_per_cpu_devid(desc)))
1667 return -EINVAL;
1668
1669 retval = irq_chip_pm_get(&desc->irq_data);
1670 if (retval < 0)
1671 return retval;
1672
1673 retval = __setup_irq(irq, desc, act);
1674
1675 if (retval)
1676 irq_chip_pm_put(&desc->irq_data);
1677
1678 return retval;
1679}
1680EXPORT_SYMBOL_GPL(setup_irq);
1681
1682/*
1683 * Internal function to unregister an irqaction - used to free
1684 * regular and special interrupts that are part of the architecture.
1685 */
1686static struct irqaction *__free_irq(struct irq_desc *desc, void *dev_id)
1687{
1688 unsigned irq = desc->irq_data.irq;
1689 struct irqaction *action, **action_ptr;
1690 unsigned long flags;
1691
1692 WARN(in_interrupt(), "Trying to free IRQ %d from IRQ context!\n", irq);
1693
1694 mutex_lock(&desc->request_mutex);
1695 chip_bus_lock(desc);
1696 raw_spin_lock_irqsave(&desc->lock, flags);
1697
1698 /*
1699 * There can be multiple actions per IRQ descriptor, find the right
1700 * one based on the dev_id:
1701 */
1702 action_ptr = &desc->action;
1703 for (;;) {
1704 action = *action_ptr;
1705
1706 if (!action) {
1707 WARN(1, "Trying to free already-free IRQ %d\n", irq);
1708 raw_spin_unlock_irqrestore(&desc->lock, flags);
1709 chip_bus_sync_unlock(desc);
1710 mutex_unlock(&desc->request_mutex);
1711 return NULL;
1712 }
1713
1714 if (action->dev_id == dev_id)
1715 break;
1716 action_ptr = &action->next;
1717 }
1718
1719 /* Found it - now remove it from the list of entries: */
1720 *action_ptr = action->next;
1721
1722 irq_pm_remove_action(desc, action);
1723
1724 /* If this was the last handler, shut down the IRQ line: */
1725 if (!desc->action) {
1726 irq_settings_clr_disable_unlazy(desc);
1727 /* Only shutdown. Deactivate after synchronize_hardirq() */
1728 irq_shutdown(desc);
1729 }
1730
1731#ifdef CONFIG_SMP
1732 /* make sure affinity_hint is cleaned up */
1733 if (WARN_ON_ONCE(desc->affinity_hint))
1734 desc->affinity_hint = NULL;
1735#endif
1736
1737 raw_spin_unlock_irqrestore(&desc->lock, flags);
1738 /*
1739 * Drop bus_lock here so the changes which were done in the chip
1740 * callbacks above are synced out to the irq chips which hang
1741 * behind a slow bus (I2C, SPI) before calling synchronize_hardirq().
1742 *
1743 * Aside of that the bus_lock can also be taken from the threaded
1744 * handler in irq_finalize_oneshot() which results in a deadlock
1745 * because kthread_stop() would wait forever for the thread to
1746 * complete, which is blocked on the bus lock.
1747 *
1748 * The still held desc->request_mutex() protects against a
1749 * concurrent request_irq() of this irq so the release of resources
1750 * and timing data is properly serialized.
1751 */
1752 chip_bus_sync_unlock(desc);
1753
1754 unregister_handler_proc(irq, action);
1755
1756 /*
1757 * Make sure it's not being used on another CPU and if the chip
1758 * supports it also make sure that there is no (not yet serviced)
1759 * interrupt in flight at the hardware level.
1760 */
1761 __synchronize_hardirq(desc, true);
1762
1763#ifdef CONFIG_DEBUG_SHIRQ
1764 /*
1765 * It's a shared IRQ -- the driver ought to be prepared for an IRQ
1766 * event to happen even now it's being freed, so let's make sure that
1767 * is so by doing an extra call to the handler ....
1768 *
1769 * ( We do this after actually deregistering it, to make sure that a
1770 * 'real' IRQ doesn't run in parallel with our fake. )
1771 */
1772 if (action->flags & IRQF_SHARED) {
1773 local_irq_save(flags);
1774 action->handler(irq, dev_id);
1775 local_irq_restore(flags);
1776 }
1777#endif
1778
1779 /*
1780 * The action has already been removed above, but the thread writes
1781 * its oneshot mask bit when it completes. Though request_mutex is
1782 * held across this which prevents __setup_irq() from handing out
1783 * the same bit to a newly requested action.
1784 */
1785 if (action->thread) {
1786 kthread_stop(action->thread);
1787 put_task_struct(action->thread);
1788 if (action->secondary && action->secondary->thread) {
1789 kthread_stop(action->secondary->thread);
1790 put_task_struct(action->secondary->thread);
1791 }
1792 }
1793
1794 /* Last action releases resources */
1795 if (!desc->action) {
1796 /*
1797 * Reaquire bus lock as irq_release_resources() might
1798 * require it to deallocate resources over the slow bus.
1799 */
1800 chip_bus_lock(desc);
1801 /*
1802 * There is no interrupt on the fly anymore. Deactivate it
1803 * completely.
1804 */
1805 raw_spin_lock_irqsave(&desc->lock, flags);
1806 irq_domain_deactivate_irq(&desc->irq_data);
1807 raw_spin_unlock_irqrestore(&desc->lock, flags);
1808
1809 irq_release_resources(desc);
1810 chip_bus_sync_unlock(desc);
1811 irq_remove_timings(desc);
1812 }
1813
1814 mutex_unlock(&desc->request_mutex);
1815
1816 irq_chip_pm_put(&desc->irq_data);
1817 module_put(desc->owner);
1818 kfree(action->secondary);
1819 return action;
1820}
1821
1822/**
1823 * remove_irq - free an interrupt
1824 * @irq: Interrupt line to free
1825 * @act: irqaction for the interrupt
1826 *
1827 * Used to remove interrupts statically setup by the early boot process.
1828 */
1829void remove_irq(unsigned int irq, struct irqaction *act)
1830{
1831 struct irq_desc *desc = irq_to_desc(irq);
1832
1833 if (desc && !WARN_ON(irq_settings_is_per_cpu_devid(desc)))
1834 __free_irq(desc, act->dev_id);
1835}
1836EXPORT_SYMBOL_GPL(remove_irq);
1837
1838/**
1839 * free_irq - free an interrupt allocated with request_irq
1840 * @irq: Interrupt line to free
1841 * @dev_id: Device identity to free
1842 *
1843 * Remove an interrupt handler. The handler is removed and if the
1844 * interrupt line is no longer in use by any driver it is disabled.
1845 * On a shared IRQ the caller must ensure the interrupt is disabled
1846 * on the card it drives before calling this function. The function
1847 * does not return until any executing interrupts for this IRQ
1848 * have completed.
1849 *
1850 * This function must not be called from interrupt context.
1851 *
1852 * Returns the devname argument passed to request_irq.
1853 */
1854const void *free_irq(unsigned int irq, void *dev_id)
1855{
1856 struct irq_desc *desc = irq_to_desc(irq);
1857 struct irqaction *action;
1858 const char *devname;
1859
1860 if (!desc || WARN_ON(irq_settings_is_per_cpu_devid(desc)))
1861 return NULL;
1862
1863#ifdef CONFIG_SMP
1864 if (WARN_ON(desc->affinity_notify))
1865 desc->affinity_notify = NULL;
1866#endif
1867
1868 action = __free_irq(desc, dev_id);
1869
1870 if (!action)
1871 return NULL;
1872
1873 devname = action->name;
1874 kfree(action);
1875 return devname;
1876}
1877EXPORT_SYMBOL(free_irq);
1878
1879/* This function must be called with desc->lock held */
1880static const void *__cleanup_nmi(unsigned int irq, struct irq_desc *desc)
1881{
1882 const char *devname = NULL;
1883
1884 desc->istate &= ~IRQS_NMI;
1885
1886 if (!WARN_ON(desc->action == NULL)) {
1887 irq_pm_remove_action(desc, desc->action);
1888 devname = desc->action->name;
1889 unregister_handler_proc(irq, desc->action);
1890
1891 kfree(desc->action);
1892 desc->action = NULL;
1893 }
1894
1895 irq_settings_clr_disable_unlazy(desc);
1896 irq_shutdown_and_deactivate(desc);
1897
1898 irq_release_resources(desc);
1899
1900 irq_chip_pm_put(&desc->irq_data);
1901 module_put(desc->owner);
1902
1903 return devname;
1904}
1905
1906const void *free_nmi(unsigned int irq, void *dev_id)
1907{
1908 struct irq_desc *desc = irq_to_desc(irq);
1909 unsigned long flags;
1910 const void *devname;
1911
1912 if (!desc || WARN_ON(!(desc->istate & IRQS_NMI)))
1913 return NULL;
1914
1915 if (WARN_ON(irq_settings_is_per_cpu_devid(desc)))
1916 return NULL;
1917
1918 /* NMI still enabled */
1919 if (WARN_ON(desc->depth == 0))
1920 disable_nmi_nosync(irq);
1921
1922 raw_spin_lock_irqsave(&desc->lock, flags);
1923
1924 irq_nmi_teardown(desc);
1925 devname = __cleanup_nmi(irq, desc);
1926
1927 raw_spin_unlock_irqrestore(&desc->lock, flags);
1928
1929 return devname;
1930}
1931
1932/**
1933 * request_threaded_irq - allocate an interrupt line
1934 * @irq: Interrupt line to allocate
1935 * @handler: Function to be called when the IRQ occurs.
1936 * Primary handler for threaded interrupts
1937 * If NULL and thread_fn != NULL the default
1938 * primary handler is installed
1939 * @thread_fn: Function called from the irq handler thread
1940 * If NULL, no irq thread is created
1941 * @irqflags: Interrupt type flags
1942 * @devname: An ascii name for the claiming device
1943 * @dev_id: A cookie passed back to the handler function
1944 *
1945 * This call allocates interrupt resources and enables the
1946 * interrupt line and IRQ handling. From the point this
1947 * call is made your handler function may be invoked. Since
1948 * your handler function must clear any interrupt the board
1949 * raises, you must take care both to initialise your hardware
1950 * and to set up the interrupt handler in the right order.
1951 *
1952 * If you want to set up a threaded irq handler for your device
1953 * then you need to supply @handler and @thread_fn. @handler is
1954 * still called in hard interrupt context and has to check
1955 * whether the interrupt originates from the device. If yes it
1956 * needs to disable the interrupt on the device and return
1957 * IRQ_WAKE_THREAD which will wake up the handler thread and run
1958 * @thread_fn. This split handler design is necessary to support
1959 * shared interrupts.
1960 *
1961 * Dev_id must be globally unique. Normally the address of the
1962 * device data structure is used as the cookie. Since the handler
1963 * receives this value it makes sense to use it.
1964 *
1965 * If your interrupt is shared you must pass a non NULL dev_id
1966 * as this is required when freeing the interrupt.
1967 *
1968 * Flags:
1969 *
1970 * IRQF_SHARED Interrupt is shared
1971 * IRQF_TRIGGER_* Specify active edge(s) or level
1972 *
1973 */
1974int request_threaded_irq(unsigned int irq, irq_handler_t handler,
1975 irq_handler_t thread_fn, unsigned long irqflags,
1976 const char *devname, void *dev_id)
1977{
1978 struct irqaction *action;
1979 struct irq_desc *desc;
1980 int retval;
1981
1982 if (irq == IRQ_NOTCONNECTED)
1983 return -ENOTCONN;
1984
1985 /*
1986 * Sanity-check: shared interrupts must pass in a real dev-ID,
1987 * otherwise we'll have trouble later trying to figure out
1988 * which interrupt is which (messes up the interrupt freeing
1989 * logic etc).
1990 *
1991 * Also IRQF_COND_SUSPEND only makes sense for shared interrupts and
1992 * it cannot be set along with IRQF_NO_SUSPEND.
1993 */
1994 if (((irqflags & IRQF_SHARED) && !dev_id) ||
1995 (!(irqflags & IRQF_SHARED) && (irqflags & IRQF_COND_SUSPEND)) ||
1996 ((irqflags & IRQF_NO_SUSPEND) && (irqflags & IRQF_COND_SUSPEND)))
1997 return -EINVAL;
1998
1999 desc = irq_to_desc(irq);
2000 if (!desc)
2001 return -EINVAL;
2002
2003 if (!irq_settings_can_request(desc) ||
2004 WARN_ON(irq_settings_is_per_cpu_devid(desc)))
2005 return -EINVAL;
2006
2007 if (!handler) {
2008 if (!thread_fn)
2009 return -EINVAL;
2010 handler = irq_default_primary_handler;
2011 }
2012
2013 action = kzalloc(sizeof(struct irqaction), GFP_KERNEL);
2014 if (!action)
2015 return -ENOMEM;
2016
2017 action->handler = handler;
2018 action->thread_fn = thread_fn;
2019 action->flags = irqflags;
2020 action->name = devname;
2021 action->dev_id = dev_id;
2022
2023 retval = irq_chip_pm_get(&desc->irq_data);
2024 if (retval < 0) {
2025 kfree(action);
2026 return retval;
2027 }
2028
2029 retval = __setup_irq(irq, desc, action);
2030
2031 if (retval) {
2032 irq_chip_pm_put(&desc->irq_data);
2033 kfree(action->secondary);
2034 kfree(action);
2035 }
2036
2037#ifdef CONFIG_DEBUG_SHIRQ_FIXME
2038 if (!retval && (irqflags & IRQF_SHARED)) {
2039 /*
2040 * It's a shared IRQ -- the driver ought to be prepared for it
2041 * to happen immediately, so let's make sure....
2042 * We disable the irq to make sure that a 'real' IRQ doesn't
2043 * run in parallel with our fake.
2044 */
2045 unsigned long flags;
2046
2047 disable_irq(irq);
2048 local_irq_save(flags);
2049
2050 handler(irq, dev_id);
2051
2052 local_irq_restore(flags);
2053 enable_irq(irq);
2054 }
2055#endif
2056 return retval;
2057}
2058EXPORT_SYMBOL(request_threaded_irq);
2059
2060/**
2061 * request_any_context_irq - allocate an interrupt line
2062 * @irq: Interrupt line to allocate
2063 * @handler: Function to be called when the IRQ occurs.
2064 * Threaded handler for threaded interrupts.
2065 * @flags: Interrupt type flags
2066 * @name: An ascii name for the claiming device
2067 * @dev_id: A cookie passed back to the handler function
2068 *
2069 * This call allocates interrupt resources and enables the
2070 * interrupt line and IRQ handling. It selects either a
2071 * hardirq or threaded handling method depending on the
2072 * context.
2073 *
2074 * On failure, it returns a negative value. On success,
2075 * it returns either IRQC_IS_HARDIRQ or IRQC_IS_NESTED.
2076 */
2077int request_any_context_irq(unsigned int irq, irq_handler_t handler,
2078 unsigned long flags, const char *name, void *dev_id)
2079{
2080 struct irq_desc *desc;
2081 int ret;
2082
2083 if (irq == IRQ_NOTCONNECTED)
2084 return -ENOTCONN;
2085
2086 desc = irq_to_desc(irq);
2087 if (!desc)
2088 return -EINVAL;
2089
2090 if (irq_settings_is_nested_thread(desc)) {
2091 ret = request_threaded_irq(irq, NULL, handler,
2092 flags, name, dev_id);
2093 return !ret ? IRQC_IS_NESTED : ret;
2094 }
2095
2096 ret = request_irq(irq, handler, flags, name, dev_id);
2097 return !ret ? IRQC_IS_HARDIRQ : ret;
2098}
2099EXPORT_SYMBOL_GPL(request_any_context_irq);
2100
2101/**
2102 * request_nmi - allocate an interrupt line for NMI delivery
2103 * @irq: Interrupt line to allocate
2104 * @handler: Function to be called when the IRQ occurs.
2105 * Threaded handler for threaded interrupts.
2106 * @irqflags: Interrupt type flags
2107 * @name: An ascii name for the claiming device
2108 * @dev_id: A cookie passed back to the handler function
2109 *
2110 * This call allocates interrupt resources and enables the
2111 * interrupt line and IRQ handling. It sets up the IRQ line
2112 * to be handled as an NMI.
2113 *
2114 * An interrupt line delivering NMIs cannot be shared and IRQ handling
2115 * cannot be threaded.
2116 *
2117 * Interrupt lines requested for NMI delivering must produce per cpu
2118 * interrupts and have auto enabling setting disabled.
2119 *
2120 * Dev_id must be globally unique. Normally the address of the
2121 * device data structure is used as the cookie. Since the handler
2122 * receives this value it makes sense to use it.
2123 *
2124 * If the interrupt line cannot be used to deliver NMIs, function
2125 * will fail and return a negative value.
2126 */
2127int request_nmi(unsigned int irq, irq_handler_t handler,
2128 unsigned long irqflags, const char *name, void *dev_id)
2129{
2130 struct irqaction *action;
2131 struct irq_desc *desc;
2132 unsigned long flags;
2133 int retval;
2134
2135 if (irq == IRQ_NOTCONNECTED)
2136 return -ENOTCONN;
2137
2138 /* NMI cannot be shared, used for Polling */
2139 if (irqflags & (IRQF_SHARED | IRQF_COND_SUSPEND | IRQF_IRQPOLL))
2140 return -EINVAL;
2141
2142 if (!(irqflags & IRQF_PERCPU))
2143 return -EINVAL;
2144
2145 if (!handler)
2146 return -EINVAL;
2147
2148 desc = irq_to_desc(irq);
2149
2150 if (!desc || irq_settings_can_autoenable(desc) ||
2151 !irq_settings_can_request(desc) ||
2152 WARN_ON(irq_settings_is_per_cpu_devid(desc)) ||
2153 !irq_supports_nmi(desc))
2154 return -EINVAL;
2155
2156 action = kzalloc(sizeof(struct irqaction), GFP_KERNEL);
2157 if (!action)
2158 return -ENOMEM;
2159
2160 action->handler = handler;
2161 action->flags = irqflags | IRQF_NO_THREAD | IRQF_NOBALANCING;
2162 action->name = name;
2163 action->dev_id = dev_id;
2164
2165 retval = irq_chip_pm_get(&desc->irq_data);
2166 if (retval < 0)
2167 goto err_out;
2168
2169 retval = __setup_irq(irq, desc, action);
2170 if (retval)
2171 goto err_irq_setup;
2172
2173 raw_spin_lock_irqsave(&desc->lock, flags);
2174
2175 /* Setup NMI state */
2176 desc->istate |= IRQS_NMI;
2177 retval = irq_nmi_setup(desc);
2178 if (retval) {
2179 __cleanup_nmi(irq, desc);
2180 raw_spin_unlock_irqrestore(&desc->lock, flags);
2181 return -EINVAL;
2182 }
2183
2184 raw_spin_unlock_irqrestore(&desc->lock, flags);
2185
2186 return 0;
2187
2188err_irq_setup:
2189 irq_chip_pm_put(&desc->irq_data);
2190err_out:
2191 kfree(action);
2192
2193 return retval;
2194}
2195
2196void enable_percpu_irq(unsigned int irq, unsigned int type)
2197{
2198 unsigned int cpu = smp_processor_id();
2199 unsigned long flags;
2200 struct irq_desc *desc = irq_get_desc_lock(irq, &flags, IRQ_GET_DESC_CHECK_PERCPU);
2201
2202 if (!desc)
2203 return;
2204
2205 /*
2206 * If the trigger type is not specified by the caller, then
2207 * use the default for this interrupt.
2208 */
2209 type &= IRQ_TYPE_SENSE_MASK;
2210 if (type == IRQ_TYPE_NONE)
2211 type = irqd_get_trigger_type(&desc->irq_data);
2212
2213 if (type != IRQ_TYPE_NONE) {
2214 int ret;
2215
2216 ret = __irq_set_trigger(desc, type);
2217
2218 if (ret) {
2219 WARN(1, "failed to set type for IRQ%d\n", irq);
2220 goto out;
2221 }
2222 }
2223
2224 irq_percpu_enable(desc, cpu);
2225out:
2226 irq_put_desc_unlock(desc, flags);
2227}
2228EXPORT_SYMBOL_GPL(enable_percpu_irq);
2229
2230void enable_percpu_nmi(unsigned int irq, unsigned int type)
2231{
2232 enable_percpu_irq(irq, type);
2233}
2234
2235/**
2236 * irq_percpu_is_enabled - Check whether the per cpu irq is enabled
2237 * @irq: Linux irq number to check for
2238 *
2239 * Must be called from a non migratable context. Returns the enable
2240 * state of a per cpu interrupt on the current cpu.
2241 */
2242bool irq_percpu_is_enabled(unsigned int irq)
2243{
2244 unsigned int cpu = smp_processor_id();
2245 struct irq_desc *desc;
2246 unsigned long flags;
2247 bool is_enabled;
2248
2249 desc = irq_get_desc_lock(irq, &flags, IRQ_GET_DESC_CHECK_PERCPU);
2250 if (!desc)
2251 return false;
2252
2253 is_enabled = cpumask_test_cpu(cpu, desc->percpu_enabled);
2254 irq_put_desc_unlock(desc, flags);
2255
2256 return is_enabled;
2257}
2258EXPORT_SYMBOL_GPL(irq_percpu_is_enabled);
2259
2260void disable_percpu_irq(unsigned int irq)
2261{
2262 unsigned int cpu = smp_processor_id();
2263 unsigned long flags;
2264 struct irq_desc *desc = irq_get_desc_lock(irq, &flags, IRQ_GET_DESC_CHECK_PERCPU);
2265
2266 if (!desc)
2267 return;
2268
2269 irq_percpu_disable(desc, cpu);
2270 irq_put_desc_unlock(desc, flags);
2271}
2272EXPORT_SYMBOL_GPL(disable_percpu_irq);
2273
2274void disable_percpu_nmi(unsigned int irq)
2275{
2276 disable_percpu_irq(irq);
2277}
2278
2279/*
2280 * Internal function to unregister a percpu irqaction.
2281 */
2282static struct irqaction *__free_percpu_irq(unsigned int irq, void __percpu *dev_id)
2283{
2284 struct irq_desc *desc = irq_to_desc(irq);
2285 struct irqaction *action;
2286 unsigned long flags;
2287
2288 WARN(in_interrupt(), "Trying to free IRQ %d from IRQ context!\n", irq);
2289
2290 if (!desc)
2291 return NULL;
2292
2293 raw_spin_lock_irqsave(&desc->lock, flags);
2294
2295 action = desc->action;
2296 if (!action || action->percpu_dev_id != dev_id) {
2297 WARN(1, "Trying to free already-free IRQ %d\n", irq);
2298 goto bad;
2299 }
2300
2301 if (!cpumask_empty(desc->percpu_enabled)) {
2302 WARN(1, "percpu IRQ %d still enabled on CPU%d!\n",
2303 irq, cpumask_first(desc->percpu_enabled));
2304 goto bad;
2305 }
2306
2307 /* Found it - now remove it from the list of entries: */
2308 desc->action = NULL;
2309
2310 desc->istate &= ~IRQS_NMI;
2311
2312 raw_spin_unlock_irqrestore(&desc->lock, flags);
2313
2314 unregister_handler_proc(irq, action);
2315
2316 irq_chip_pm_put(&desc->irq_data);
2317 module_put(desc->owner);
2318 return action;
2319
2320bad:
2321 raw_spin_unlock_irqrestore(&desc->lock, flags);
2322 return NULL;
2323}
2324
2325/**
2326 * remove_percpu_irq - free a per-cpu interrupt
2327 * @irq: Interrupt line to free
2328 * @act: irqaction for the interrupt
2329 *
2330 * Used to remove interrupts statically setup by the early boot process.
2331 */
2332void remove_percpu_irq(unsigned int irq, struct irqaction *act)
2333{
2334 struct irq_desc *desc = irq_to_desc(irq);
2335
2336 if (desc && irq_settings_is_per_cpu_devid(desc))
2337 __free_percpu_irq(irq, act->percpu_dev_id);
2338}
2339
2340/**
2341 * free_percpu_irq - free an interrupt allocated with request_percpu_irq
2342 * @irq: Interrupt line to free
2343 * @dev_id: Device identity to free
2344 *
2345 * Remove a percpu interrupt handler. The handler is removed, but
2346 * the interrupt line is not disabled. This must be done on each
2347 * CPU before calling this function. The function does not return
2348 * until any executing interrupts for this IRQ have completed.
2349 *
2350 * This function must not be called from interrupt context.
2351 */
2352void free_percpu_irq(unsigned int irq, void __percpu *dev_id)
2353{
2354 struct irq_desc *desc = irq_to_desc(irq);
2355
2356 if (!desc || !irq_settings_is_per_cpu_devid(desc))
2357 return;
2358
2359 chip_bus_lock(desc);
2360 kfree(__free_percpu_irq(irq, dev_id));
2361 chip_bus_sync_unlock(desc);
2362}
2363EXPORT_SYMBOL_GPL(free_percpu_irq);
2364
2365void free_percpu_nmi(unsigned int irq, void __percpu *dev_id)
2366{
2367 struct irq_desc *desc = irq_to_desc(irq);
2368
2369 if (!desc || !irq_settings_is_per_cpu_devid(desc))
2370 return;
2371
2372 if (WARN_ON(!(desc->istate & IRQS_NMI)))
2373 return;
2374
2375 kfree(__free_percpu_irq(irq, dev_id));
2376}
2377
2378/**
2379 * setup_percpu_irq - setup a per-cpu interrupt
2380 * @irq: Interrupt line to setup
2381 * @act: irqaction for the interrupt
2382 *
2383 * Used to statically setup per-cpu interrupts in the early boot process.
2384 */
2385int setup_percpu_irq(unsigned int irq, struct irqaction *act)
2386{
2387 struct irq_desc *desc = irq_to_desc(irq);
2388 int retval;
2389
2390 if (!desc || !irq_settings_is_per_cpu_devid(desc))
2391 return -EINVAL;
2392
2393 retval = irq_chip_pm_get(&desc->irq_data);
2394 if (retval < 0)
2395 return retval;
2396
2397 retval = __setup_irq(irq, desc, act);
2398
2399 if (retval)
2400 irq_chip_pm_put(&desc->irq_data);
2401
2402 return retval;
2403}
2404
2405/**
2406 * __request_percpu_irq - allocate a percpu interrupt line
2407 * @irq: Interrupt line to allocate
2408 * @handler: Function to be called when the IRQ occurs.
2409 * @flags: Interrupt type flags (IRQF_TIMER only)
2410 * @devname: An ascii name for the claiming device
2411 * @dev_id: A percpu cookie passed back to the handler function
2412 *
2413 * This call allocates interrupt resources and enables the
2414 * interrupt on the local CPU. If the interrupt is supposed to be
2415 * enabled on other CPUs, it has to be done on each CPU using
2416 * enable_percpu_irq().
2417 *
2418 * Dev_id must be globally unique. It is a per-cpu variable, and
2419 * the handler gets called with the interrupted CPU's instance of
2420 * that variable.
2421 */
2422int __request_percpu_irq(unsigned int irq, irq_handler_t handler,
2423 unsigned long flags, const char *devname,
2424 void __percpu *dev_id)
2425{
2426 struct irqaction *action;
2427 struct irq_desc *desc;
2428 int retval;
2429
2430 if (!dev_id)
2431 return -EINVAL;
2432
2433 desc = irq_to_desc(irq);
2434 if (!desc || !irq_settings_can_request(desc) ||
2435 !irq_settings_is_per_cpu_devid(desc))
2436 return -EINVAL;
2437
2438 if (flags && flags != IRQF_TIMER)
2439 return -EINVAL;
2440
2441 action = kzalloc(sizeof(struct irqaction), GFP_KERNEL);
2442 if (!action)
2443 return -ENOMEM;
2444
2445 action->handler = handler;
2446 action->flags = flags | IRQF_PERCPU | IRQF_NO_SUSPEND;
2447 action->name = devname;
2448 action->percpu_dev_id = dev_id;
2449
2450 retval = irq_chip_pm_get(&desc->irq_data);
2451 if (retval < 0) {
2452 kfree(action);
2453 return retval;
2454 }
2455
2456 retval = __setup_irq(irq, desc, action);
2457
2458 if (retval) {
2459 irq_chip_pm_put(&desc->irq_data);
2460 kfree(action);
2461 }
2462
2463 return retval;
2464}
2465EXPORT_SYMBOL_GPL(__request_percpu_irq);
2466
2467/**
2468 * request_percpu_nmi - allocate a percpu interrupt line for NMI delivery
2469 * @irq: Interrupt line to allocate
2470 * @handler: Function to be called when the IRQ occurs.
2471 * @name: An ascii name for the claiming device
2472 * @dev_id: A percpu cookie passed back to the handler function
2473 *
2474 * This call allocates interrupt resources for a per CPU NMI. Per CPU NMIs
2475 * have to be setup on each CPU by calling prepare_percpu_nmi() before
2476 * being enabled on the same CPU by using enable_percpu_nmi().
2477 *
2478 * Dev_id must be globally unique. It is a per-cpu variable, and
2479 * the handler gets called with the interrupted CPU's instance of
2480 * that variable.
2481 *
2482 * Interrupt lines requested for NMI delivering should have auto enabling
2483 * setting disabled.
2484 *
2485 * If the interrupt line cannot be used to deliver NMIs, function
2486 * will fail returning a negative value.
2487 */
2488int request_percpu_nmi(unsigned int irq, irq_handler_t handler,
2489 const char *name, void __percpu *dev_id)
2490{
2491 struct irqaction *action;
2492 struct irq_desc *desc;
2493 unsigned long flags;
2494 int retval;
2495
2496 if (!handler)
2497 return -EINVAL;
2498
2499 desc = irq_to_desc(irq);
2500
2501 if (!desc || !irq_settings_can_request(desc) ||
2502 !irq_settings_is_per_cpu_devid(desc) ||
2503 irq_settings_can_autoenable(desc) ||
2504 !irq_supports_nmi(desc))
2505 return -EINVAL;
2506
2507 /* The line cannot already be NMI */
2508 if (desc->istate & IRQS_NMI)
2509 return -EINVAL;
2510
2511 action = kzalloc(sizeof(struct irqaction), GFP_KERNEL);
2512 if (!action)
2513 return -ENOMEM;
2514
2515 action->handler = handler;
2516 action->flags = IRQF_PERCPU | IRQF_NO_SUSPEND | IRQF_NO_THREAD
2517 | IRQF_NOBALANCING;
2518 action->name = name;
2519 action->percpu_dev_id = dev_id;
2520
2521 retval = irq_chip_pm_get(&desc->irq_data);
2522 if (retval < 0)
2523 goto err_out;
2524
2525 retval = __setup_irq(irq, desc, action);
2526 if (retval)
2527 goto err_irq_setup;
2528
2529 raw_spin_lock_irqsave(&desc->lock, flags);
2530 desc->istate |= IRQS_NMI;
2531 raw_spin_unlock_irqrestore(&desc->lock, flags);
2532
2533 return 0;
2534
2535err_irq_setup:
2536 irq_chip_pm_put(&desc->irq_data);
2537err_out:
2538 kfree(action);
2539
2540 return retval;
2541}
2542
2543/**
2544 * prepare_percpu_nmi - performs CPU local setup for NMI delivery
2545 * @irq: Interrupt line to prepare for NMI delivery
2546 *
2547 * This call prepares an interrupt line to deliver NMI on the current CPU,
2548 * before that interrupt line gets enabled with enable_percpu_nmi().
2549 *
2550 * As a CPU local operation, this should be called from non-preemptible
2551 * context.
2552 *
2553 * If the interrupt line cannot be used to deliver NMIs, function
2554 * will fail returning a negative value.
2555 */
2556int prepare_percpu_nmi(unsigned int irq)
2557{
2558 unsigned long flags;
2559 struct irq_desc *desc;
2560 int ret = 0;
2561
2562 WARN_ON(preemptible());
2563
2564 desc = irq_get_desc_lock(irq, &flags,
2565 IRQ_GET_DESC_CHECK_PERCPU);
2566 if (!desc)
2567 return -EINVAL;
2568
2569 if (WARN(!(desc->istate & IRQS_NMI),
2570 KERN_ERR "prepare_percpu_nmi called for a non-NMI interrupt: irq %u\n",
2571 irq)) {
2572 ret = -EINVAL;
2573 goto out;
2574 }
2575
2576 ret = irq_nmi_setup(desc);
2577 if (ret) {
2578 pr_err("Failed to setup NMI delivery: irq %u\n", irq);
2579 goto out;
2580 }
2581
2582out:
2583 irq_put_desc_unlock(desc, flags);
2584 return ret;
2585}
2586
2587/**
2588 * teardown_percpu_nmi - undoes NMI setup of IRQ line
2589 * @irq: Interrupt line from which CPU local NMI configuration should be
2590 * removed
2591 *
2592 * This call undoes the setup done by prepare_percpu_nmi().
2593 *
2594 * IRQ line should not be enabled for the current CPU.
2595 *
2596 * As a CPU local operation, this should be called from non-preemptible
2597 * context.
2598 */
2599void teardown_percpu_nmi(unsigned int irq)
2600{
2601 unsigned long flags;
2602 struct irq_desc *desc;
2603
2604 WARN_ON(preemptible());
2605
2606 desc = irq_get_desc_lock(irq, &flags,
2607 IRQ_GET_DESC_CHECK_PERCPU);
2608 if (!desc)
2609 return;
2610
2611 if (WARN_ON(!(desc->istate & IRQS_NMI)))
2612 goto out;
2613
2614 irq_nmi_teardown(desc);
2615out:
2616 irq_put_desc_unlock(desc, flags);
2617}
2618
2619int __irq_get_irqchip_state(struct irq_data *data, enum irqchip_irq_state which,
2620 bool *state)
2621{
2622 struct irq_chip *chip;
2623 int err = -EINVAL;
2624
2625 do {
2626 chip = irq_data_get_irq_chip(data);
2627 if (chip->irq_get_irqchip_state)
2628 break;
2629#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
2630 data = data->parent_data;
2631#else
2632 data = NULL;
2633#endif
2634 } while (data);
2635
2636 if (data)
2637 err = chip->irq_get_irqchip_state(data, which, state);
2638 return err;
2639}
2640
2641/**
2642 * irq_get_irqchip_state - returns the irqchip state of a interrupt.
2643 * @irq: Interrupt line that is forwarded to a VM
2644 * @which: One of IRQCHIP_STATE_* the caller wants to know about
2645 * @state: a pointer to a boolean where the state is to be storeed
2646 *
2647 * This call snapshots the internal irqchip state of an
2648 * interrupt, returning into @state the bit corresponding to
2649 * stage @which
2650 *
2651 * This function should be called with preemption disabled if the
2652 * interrupt controller has per-cpu registers.
2653 */
2654int irq_get_irqchip_state(unsigned int irq, enum irqchip_irq_state which,
2655 bool *state)
2656{
2657 struct irq_desc *desc;
2658 struct irq_data *data;
2659 unsigned long flags;
2660 int err = -EINVAL;
2661
2662 desc = irq_get_desc_buslock(irq, &flags, 0);
2663 if (!desc)
2664 return err;
2665
2666 data = irq_desc_get_irq_data(desc);
2667
2668 err = __irq_get_irqchip_state(data, which, state);
2669
2670 irq_put_desc_busunlock(desc, flags);
2671 return err;
2672}
2673EXPORT_SYMBOL_GPL(irq_get_irqchip_state);
2674
2675/**
2676 * irq_set_irqchip_state - set the state of a forwarded interrupt.
2677 * @irq: Interrupt line that is forwarded to a VM
2678 * @which: State to be restored (one of IRQCHIP_STATE_*)
2679 * @val: Value corresponding to @which
2680 *
2681 * This call sets the internal irqchip state of an interrupt,
2682 * depending on the value of @which.
2683 *
2684 * This function should be called with preemption disabled if the
2685 * interrupt controller has per-cpu registers.
2686 */
2687int irq_set_irqchip_state(unsigned int irq, enum irqchip_irq_state which,
2688 bool val)
2689{
2690 struct irq_desc *desc;
2691 struct irq_data *data;
2692 struct irq_chip *chip;
2693 unsigned long flags;
2694 int err = -EINVAL;
2695
2696 desc = irq_get_desc_buslock(irq, &flags, 0);
2697 if (!desc)
2698 return err;
2699
2700 data = irq_desc_get_irq_data(desc);
2701
2702 do {
2703 chip = irq_data_get_irq_chip(data);
2704 if (chip->irq_set_irqchip_state)
2705 break;
2706#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
2707 data = data->parent_data;
2708#else
2709 data = NULL;
2710#endif
2711 } while (data);
2712
2713 if (data)
2714 err = chip->irq_set_irqchip_state(data, which, val);
2715
2716 irq_put_desc_busunlock(desc, flags);
2717 return err;
2718}
2719EXPORT_SYMBOL_GPL(irq_set_irqchip_state);
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright (C) 1992, 1998-2006 Linus Torvalds, Ingo Molnar
4 * Copyright (C) 2005-2006 Thomas Gleixner
5 *
6 * This file contains driver APIs to the irq subsystem.
7 */
8
9#define pr_fmt(fmt) "genirq: " fmt
10
11#include <linux/irq.h>
12#include <linux/kthread.h>
13#include <linux/module.h>
14#include <linux/random.h>
15#include <linux/interrupt.h>
16#include <linux/irqdomain.h>
17#include <linux/slab.h>
18#include <linux/sched.h>
19#include <linux/sched/rt.h>
20#include <linux/sched/task.h>
21#include <linux/sched/isolation.h>
22#include <uapi/linux/sched/types.h>
23#include <linux/task_work.h>
24
25#include "internals.h"
26
27#if defined(CONFIG_IRQ_FORCED_THREADING) && !defined(CONFIG_PREEMPT_RT)
28__read_mostly bool force_irqthreads;
29EXPORT_SYMBOL_GPL(force_irqthreads);
30
31static int __init setup_forced_irqthreads(char *arg)
32{
33 force_irqthreads = true;
34 return 0;
35}
36early_param("threadirqs", setup_forced_irqthreads);
37#endif
38
39static void __synchronize_hardirq(struct irq_desc *desc, bool sync_chip)
40{
41 struct irq_data *irqd = irq_desc_get_irq_data(desc);
42 bool inprogress;
43
44 do {
45 unsigned long flags;
46
47 /*
48 * Wait until we're out of the critical section. This might
49 * give the wrong answer due to the lack of memory barriers.
50 */
51 while (irqd_irq_inprogress(&desc->irq_data))
52 cpu_relax();
53
54 /* Ok, that indicated we're done: double-check carefully. */
55 raw_spin_lock_irqsave(&desc->lock, flags);
56 inprogress = irqd_irq_inprogress(&desc->irq_data);
57
58 /*
59 * If requested and supported, check at the chip whether it
60 * is in flight at the hardware level, i.e. already pending
61 * in a CPU and waiting for service and acknowledge.
62 */
63 if (!inprogress && sync_chip) {
64 /*
65 * Ignore the return code. inprogress is only updated
66 * when the chip supports it.
67 */
68 __irq_get_irqchip_state(irqd, IRQCHIP_STATE_ACTIVE,
69 &inprogress);
70 }
71 raw_spin_unlock_irqrestore(&desc->lock, flags);
72
73 /* Oops, that failed? */
74 } while (inprogress);
75}
76
77/**
78 * synchronize_hardirq - wait for pending hard IRQ handlers (on other CPUs)
79 * @irq: interrupt number to wait for
80 *
81 * This function waits for any pending hard IRQ handlers for this
82 * interrupt to complete before returning. If you use this
83 * function while holding a resource the IRQ handler may need you
84 * will deadlock. It does not take associated threaded handlers
85 * into account.
86 *
87 * Do not use this for shutdown scenarios where you must be sure
88 * that all parts (hardirq and threaded handler) have completed.
89 *
90 * Returns: false if a threaded handler is active.
91 *
92 * This function may be called - with care - from IRQ context.
93 *
94 * It does not check whether there is an interrupt in flight at the
95 * hardware level, but not serviced yet, as this might deadlock when
96 * called with interrupts disabled and the target CPU of the interrupt
97 * is the current CPU.
98 */
99bool synchronize_hardirq(unsigned int irq)
100{
101 struct irq_desc *desc = irq_to_desc(irq);
102
103 if (desc) {
104 __synchronize_hardirq(desc, false);
105 return !atomic_read(&desc->threads_active);
106 }
107
108 return true;
109}
110EXPORT_SYMBOL(synchronize_hardirq);
111
112/**
113 * synchronize_irq - wait for pending IRQ handlers (on other CPUs)
114 * @irq: interrupt number to wait for
115 *
116 * This function waits for any pending IRQ handlers for this interrupt
117 * to complete before returning. If you use this function while
118 * holding a resource the IRQ handler may need you will deadlock.
119 *
120 * Can only be called from preemptible code as it might sleep when
121 * an interrupt thread is associated to @irq.
122 *
123 * It optionally makes sure (when the irq chip supports that method)
124 * that the interrupt is not pending in any CPU and waiting for
125 * service.
126 */
127void synchronize_irq(unsigned int irq)
128{
129 struct irq_desc *desc = irq_to_desc(irq);
130
131 if (desc) {
132 __synchronize_hardirq(desc, true);
133 /*
134 * We made sure that no hardirq handler is
135 * running. Now verify that no threaded handlers are
136 * active.
137 */
138 wait_event(desc->wait_for_threads,
139 !atomic_read(&desc->threads_active));
140 }
141}
142EXPORT_SYMBOL(synchronize_irq);
143
144#ifdef CONFIG_SMP
145cpumask_var_t irq_default_affinity;
146
147static bool __irq_can_set_affinity(struct irq_desc *desc)
148{
149 if (!desc || !irqd_can_balance(&desc->irq_data) ||
150 !desc->irq_data.chip || !desc->irq_data.chip->irq_set_affinity)
151 return false;
152 return true;
153}
154
155/**
156 * irq_can_set_affinity - Check if the affinity of a given irq can be set
157 * @irq: Interrupt to check
158 *
159 */
160int irq_can_set_affinity(unsigned int irq)
161{
162 return __irq_can_set_affinity(irq_to_desc(irq));
163}
164
165/**
166 * irq_can_set_affinity_usr - Check if affinity of a irq can be set from user space
167 * @irq: Interrupt to check
168 *
169 * Like irq_can_set_affinity() above, but additionally checks for the
170 * AFFINITY_MANAGED flag.
171 */
172bool irq_can_set_affinity_usr(unsigned int irq)
173{
174 struct irq_desc *desc = irq_to_desc(irq);
175
176 return __irq_can_set_affinity(desc) &&
177 !irqd_affinity_is_managed(&desc->irq_data);
178}
179
180/**
181 * irq_set_thread_affinity - Notify irq threads to adjust affinity
182 * @desc: irq descriptor which has affinity changed
183 *
184 * We just set IRQTF_AFFINITY and delegate the affinity setting
185 * to the interrupt thread itself. We can not call
186 * set_cpus_allowed_ptr() here as we hold desc->lock and this
187 * code can be called from hard interrupt context.
188 */
189void irq_set_thread_affinity(struct irq_desc *desc)
190{
191 struct irqaction *action;
192
193 for_each_action_of_desc(desc, action)
194 if (action->thread)
195 set_bit(IRQTF_AFFINITY, &action->thread_flags);
196}
197
198#ifdef CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK
199static void irq_validate_effective_affinity(struct irq_data *data)
200{
201 const struct cpumask *m = irq_data_get_effective_affinity_mask(data);
202 struct irq_chip *chip = irq_data_get_irq_chip(data);
203
204 if (!cpumask_empty(m))
205 return;
206 pr_warn_once("irq_chip %s did not update eff. affinity mask of irq %u\n",
207 chip->name, data->irq);
208}
209
210static inline void irq_init_effective_affinity(struct irq_data *data,
211 const struct cpumask *mask)
212{
213 cpumask_copy(irq_data_get_effective_affinity_mask(data), mask);
214}
215#else
216static inline void irq_validate_effective_affinity(struct irq_data *data) { }
217static inline void irq_init_effective_affinity(struct irq_data *data,
218 const struct cpumask *mask) { }
219#endif
220
221int irq_do_set_affinity(struct irq_data *data, const struct cpumask *mask,
222 bool force)
223{
224 struct irq_desc *desc = irq_data_to_desc(data);
225 struct irq_chip *chip = irq_data_get_irq_chip(data);
226 int ret;
227
228 if (!chip || !chip->irq_set_affinity)
229 return -EINVAL;
230
231 /*
232 * If this is a managed interrupt and housekeeping is enabled on
233 * it check whether the requested affinity mask intersects with
234 * a housekeeping CPU. If so, then remove the isolated CPUs from
235 * the mask and just keep the housekeeping CPU(s). This prevents
236 * the affinity setter from routing the interrupt to an isolated
237 * CPU to avoid that I/O submitted from a housekeeping CPU causes
238 * interrupts on an isolated one.
239 *
240 * If the masks do not intersect or include online CPU(s) then
241 * keep the requested mask. The isolated target CPUs are only
242 * receiving interrupts when the I/O operation was submitted
243 * directly from them.
244 *
245 * If all housekeeping CPUs in the affinity mask are offline, the
246 * interrupt will be migrated by the CPU hotplug code once a
247 * housekeeping CPU which belongs to the affinity mask comes
248 * online.
249 */
250 if (irqd_affinity_is_managed(data) &&
251 housekeeping_enabled(HK_FLAG_MANAGED_IRQ)) {
252 const struct cpumask *hk_mask, *prog_mask;
253
254 static DEFINE_RAW_SPINLOCK(tmp_mask_lock);
255 static struct cpumask tmp_mask;
256
257 hk_mask = housekeeping_cpumask(HK_FLAG_MANAGED_IRQ);
258
259 raw_spin_lock(&tmp_mask_lock);
260 cpumask_and(&tmp_mask, mask, hk_mask);
261 if (!cpumask_intersects(&tmp_mask, cpu_online_mask))
262 prog_mask = mask;
263 else
264 prog_mask = &tmp_mask;
265 ret = chip->irq_set_affinity(data, prog_mask, force);
266 raw_spin_unlock(&tmp_mask_lock);
267 } else {
268 ret = chip->irq_set_affinity(data, mask, force);
269 }
270 switch (ret) {
271 case IRQ_SET_MASK_OK:
272 case IRQ_SET_MASK_OK_DONE:
273 cpumask_copy(desc->irq_common_data.affinity, mask);
274 fallthrough;
275 case IRQ_SET_MASK_OK_NOCOPY:
276 irq_validate_effective_affinity(data);
277 irq_set_thread_affinity(desc);
278 ret = 0;
279 }
280
281 return ret;
282}
283
284#ifdef CONFIG_GENERIC_PENDING_IRQ
285static inline int irq_set_affinity_pending(struct irq_data *data,
286 const struct cpumask *dest)
287{
288 struct irq_desc *desc = irq_data_to_desc(data);
289
290 irqd_set_move_pending(data);
291 irq_copy_pending(desc, dest);
292 return 0;
293}
294#else
295static inline int irq_set_affinity_pending(struct irq_data *data,
296 const struct cpumask *dest)
297{
298 return -EBUSY;
299}
300#endif
301
302static int irq_try_set_affinity(struct irq_data *data,
303 const struct cpumask *dest, bool force)
304{
305 int ret = irq_do_set_affinity(data, dest, force);
306
307 /*
308 * In case that the underlying vector management is busy and the
309 * architecture supports the generic pending mechanism then utilize
310 * this to avoid returning an error to user space.
311 */
312 if (ret == -EBUSY && !force)
313 ret = irq_set_affinity_pending(data, dest);
314 return ret;
315}
316
317static bool irq_set_affinity_deactivated(struct irq_data *data,
318 const struct cpumask *mask, bool force)
319{
320 struct irq_desc *desc = irq_data_to_desc(data);
321
322 /*
323 * Handle irq chips which can handle affinity only in activated
324 * state correctly
325 *
326 * If the interrupt is not yet activated, just store the affinity
327 * mask and do not call the chip driver at all. On activation the
328 * driver has to make sure anyway that the interrupt is in a
329 * usable state so startup works.
330 */
331 if (!IS_ENABLED(CONFIG_IRQ_DOMAIN_HIERARCHY) ||
332 irqd_is_activated(data) || !irqd_affinity_on_activate(data))
333 return false;
334
335 cpumask_copy(desc->irq_common_data.affinity, mask);
336 irq_init_effective_affinity(data, mask);
337 irqd_set(data, IRQD_AFFINITY_SET);
338 return true;
339}
340
341int irq_set_affinity_locked(struct irq_data *data, const struct cpumask *mask,
342 bool force)
343{
344 struct irq_chip *chip = irq_data_get_irq_chip(data);
345 struct irq_desc *desc = irq_data_to_desc(data);
346 int ret = 0;
347
348 if (!chip || !chip->irq_set_affinity)
349 return -EINVAL;
350
351 if (irq_set_affinity_deactivated(data, mask, force))
352 return 0;
353
354 if (irq_can_move_pcntxt(data) && !irqd_is_setaffinity_pending(data)) {
355 ret = irq_try_set_affinity(data, mask, force);
356 } else {
357 irqd_set_move_pending(data);
358 irq_copy_pending(desc, mask);
359 }
360
361 if (desc->affinity_notify) {
362 kref_get(&desc->affinity_notify->kref);
363 if (!schedule_work(&desc->affinity_notify->work)) {
364 /* Work was already scheduled, drop our extra ref */
365 kref_put(&desc->affinity_notify->kref,
366 desc->affinity_notify->release);
367 }
368 }
369 irqd_set(data, IRQD_AFFINITY_SET);
370
371 return ret;
372}
373
374/**
375 * irq_update_affinity_desc - Update affinity management for an interrupt
376 * @irq: The interrupt number to update
377 * @affinity: Pointer to the affinity descriptor
378 *
379 * This interface can be used to configure the affinity management of
380 * interrupts which have been allocated already.
381 *
382 * There are certain limitations on when it may be used - attempts to use it
383 * for when the kernel is configured for generic IRQ reservation mode (in
384 * config GENERIC_IRQ_RESERVATION_MODE) will fail, as it may conflict with
385 * managed/non-managed interrupt accounting. In addition, attempts to use it on
386 * an interrupt which is already started or which has already been configured
387 * as managed will also fail, as these mean invalid init state or double init.
388 */
389int irq_update_affinity_desc(unsigned int irq,
390 struct irq_affinity_desc *affinity)
391{
392 struct irq_desc *desc;
393 unsigned long flags;
394 bool activated;
395 int ret = 0;
396
397 /*
398 * Supporting this with the reservation scheme used by x86 needs
399 * some more thought. Fail it for now.
400 */
401 if (IS_ENABLED(CONFIG_GENERIC_IRQ_RESERVATION_MODE))
402 return -EOPNOTSUPP;
403
404 desc = irq_get_desc_buslock(irq, &flags, 0);
405 if (!desc)
406 return -EINVAL;
407
408 /* Requires the interrupt to be shut down */
409 if (irqd_is_started(&desc->irq_data)) {
410 ret = -EBUSY;
411 goto out_unlock;
412 }
413
414 /* Interrupts which are already managed cannot be modified */
415 if (irqd_affinity_is_managed(&desc->irq_data)) {
416 ret = -EBUSY;
417 goto out_unlock;
418 }
419
420 /*
421 * Deactivate the interrupt. That's required to undo
422 * anything an earlier activation has established.
423 */
424 activated = irqd_is_activated(&desc->irq_data);
425 if (activated)
426 irq_domain_deactivate_irq(&desc->irq_data);
427
428 if (affinity->is_managed) {
429 irqd_set(&desc->irq_data, IRQD_AFFINITY_MANAGED);
430 irqd_set(&desc->irq_data, IRQD_MANAGED_SHUTDOWN);
431 }
432
433 cpumask_copy(desc->irq_common_data.affinity, &affinity->mask);
434
435 /* Restore the activation state */
436 if (activated)
437 irq_domain_activate_irq(&desc->irq_data, false);
438
439out_unlock:
440 irq_put_desc_busunlock(desc, flags);
441 return ret;
442}
443
444static int __irq_set_affinity(unsigned int irq, const struct cpumask *mask,
445 bool force)
446{
447 struct irq_desc *desc = irq_to_desc(irq);
448 unsigned long flags;
449 int ret;
450
451 if (!desc)
452 return -EINVAL;
453
454 raw_spin_lock_irqsave(&desc->lock, flags);
455 ret = irq_set_affinity_locked(irq_desc_get_irq_data(desc), mask, force);
456 raw_spin_unlock_irqrestore(&desc->lock, flags);
457 return ret;
458}
459
460/**
461 * irq_set_affinity - Set the irq affinity of a given irq
462 * @irq: Interrupt to set affinity
463 * @cpumask: cpumask
464 *
465 * Fails if cpumask does not contain an online CPU
466 */
467int irq_set_affinity(unsigned int irq, const struct cpumask *cpumask)
468{
469 return __irq_set_affinity(irq, cpumask, false);
470}
471EXPORT_SYMBOL_GPL(irq_set_affinity);
472
473/**
474 * irq_force_affinity - Force the irq affinity of a given irq
475 * @irq: Interrupt to set affinity
476 * @cpumask: cpumask
477 *
478 * Same as irq_set_affinity, but without checking the mask against
479 * online cpus.
480 *
481 * Solely for low level cpu hotplug code, where we need to make per
482 * cpu interrupts affine before the cpu becomes online.
483 */
484int irq_force_affinity(unsigned int irq, const struct cpumask *cpumask)
485{
486 return __irq_set_affinity(irq, cpumask, true);
487}
488EXPORT_SYMBOL_GPL(irq_force_affinity);
489
490int irq_set_affinity_hint(unsigned int irq, const struct cpumask *m)
491{
492 unsigned long flags;
493 struct irq_desc *desc = irq_get_desc_lock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
494
495 if (!desc)
496 return -EINVAL;
497 desc->affinity_hint = m;
498 irq_put_desc_unlock(desc, flags);
499 /* set the initial affinity to prevent every interrupt being on CPU0 */
500 if (m)
501 __irq_set_affinity(irq, m, false);
502 return 0;
503}
504EXPORT_SYMBOL_GPL(irq_set_affinity_hint);
505
506static void irq_affinity_notify(struct work_struct *work)
507{
508 struct irq_affinity_notify *notify =
509 container_of(work, struct irq_affinity_notify, work);
510 struct irq_desc *desc = irq_to_desc(notify->irq);
511 cpumask_var_t cpumask;
512 unsigned long flags;
513
514 if (!desc || !alloc_cpumask_var(&cpumask, GFP_KERNEL))
515 goto out;
516
517 raw_spin_lock_irqsave(&desc->lock, flags);
518 if (irq_move_pending(&desc->irq_data))
519 irq_get_pending(cpumask, desc);
520 else
521 cpumask_copy(cpumask, desc->irq_common_data.affinity);
522 raw_spin_unlock_irqrestore(&desc->lock, flags);
523
524 notify->notify(notify, cpumask);
525
526 free_cpumask_var(cpumask);
527out:
528 kref_put(¬ify->kref, notify->release);
529}
530
531/**
532 * irq_set_affinity_notifier - control notification of IRQ affinity changes
533 * @irq: Interrupt for which to enable/disable notification
534 * @notify: Context for notification, or %NULL to disable
535 * notification. Function pointers must be initialised;
536 * the other fields will be initialised by this function.
537 *
538 * Must be called in process context. Notification may only be enabled
539 * after the IRQ is allocated and must be disabled before the IRQ is
540 * freed using free_irq().
541 */
542int
543irq_set_affinity_notifier(unsigned int irq, struct irq_affinity_notify *notify)
544{
545 struct irq_desc *desc = irq_to_desc(irq);
546 struct irq_affinity_notify *old_notify;
547 unsigned long flags;
548
549 /* The release function is promised process context */
550 might_sleep();
551
552 if (!desc || desc->istate & IRQS_NMI)
553 return -EINVAL;
554
555 /* Complete initialisation of *notify */
556 if (notify) {
557 notify->irq = irq;
558 kref_init(¬ify->kref);
559 INIT_WORK(¬ify->work, irq_affinity_notify);
560 }
561
562 raw_spin_lock_irqsave(&desc->lock, flags);
563 old_notify = desc->affinity_notify;
564 desc->affinity_notify = notify;
565 raw_spin_unlock_irqrestore(&desc->lock, flags);
566
567 if (old_notify) {
568 if (cancel_work_sync(&old_notify->work)) {
569 /* Pending work had a ref, put that one too */
570 kref_put(&old_notify->kref, old_notify->release);
571 }
572 kref_put(&old_notify->kref, old_notify->release);
573 }
574
575 return 0;
576}
577EXPORT_SYMBOL_GPL(irq_set_affinity_notifier);
578
579#ifndef CONFIG_AUTO_IRQ_AFFINITY
580/*
581 * Generic version of the affinity autoselector.
582 */
583int irq_setup_affinity(struct irq_desc *desc)
584{
585 struct cpumask *set = irq_default_affinity;
586 int ret, node = irq_desc_get_node(desc);
587 static DEFINE_RAW_SPINLOCK(mask_lock);
588 static struct cpumask mask;
589
590 /* Excludes PER_CPU and NO_BALANCE interrupts */
591 if (!__irq_can_set_affinity(desc))
592 return 0;
593
594 raw_spin_lock(&mask_lock);
595 /*
596 * Preserve the managed affinity setting and a userspace affinity
597 * setup, but make sure that one of the targets is online.
598 */
599 if (irqd_affinity_is_managed(&desc->irq_data) ||
600 irqd_has_set(&desc->irq_data, IRQD_AFFINITY_SET)) {
601 if (cpumask_intersects(desc->irq_common_data.affinity,
602 cpu_online_mask))
603 set = desc->irq_common_data.affinity;
604 else
605 irqd_clear(&desc->irq_data, IRQD_AFFINITY_SET);
606 }
607
608 cpumask_and(&mask, cpu_online_mask, set);
609 if (cpumask_empty(&mask))
610 cpumask_copy(&mask, cpu_online_mask);
611
612 if (node != NUMA_NO_NODE) {
613 const struct cpumask *nodemask = cpumask_of_node(node);
614
615 /* make sure at least one of the cpus in nodemask is online */
616 if (cpumask_intersects(&mask, nodemask))
617 cpumask_and(&mask, &mask, nodemask);
618 }
619 ret = irq_do_set_affinity(&desc->irq_data, &mask, false);
620 raw_spin_unlock(&mask_lock);
621 return ret;
622}
623#else
624/* Wrapper for ALPHA specific affinity selector magic */
625int irq_setup_affinity(struct irq_desc *desc)
626{
627 return irq_select_affinity(irq_desc_get_irq(desc));
628}
629#endif /* CONFIG_AUTO_IRQ_AFFINITY */
630#endif /* CONFIG_SMP */
631
632
633/**
634 * irq_set_vcpu_affinity - Set vcpu affinity for the interrupt
635 * @irq: interrupt number to set affinity
636 * @vcpu_info: vCPU specific data or pointer to a percpu array of vCPU
637 * specific data for percpu_devid interrupts
638 *
639 * This function uses the vCPU specific data to set the vCPU
640 * affinity for an irq. The vCPU specific data is passed from
641 * outside, such as KVM. One example code path is as below:
642 * KVM -> IOMMU -> irq_set_vcpu_affinity().
643 */
644int irq_set_vcpu_affinity(unsigned int irq, void *vcpu_info)
645{
646 unsigned long flags;
647 struct irq_desc *desc = irq_get_desc_lock(irq, &flags, 0);
648 struct irq_data *data;
649 struct irq_chip *chip;
650 int ret = -ENOSYS;
651
652 if (!desc)
653 return -EINVAL;
654
655 data = irq_desc_get_irq_data(desc);
656 do {
657 chip = irq_data_get_irq_chip(data);
658 if (chip && chip->irq_set_vcpu_affinity)
659 break;
660#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
661 data = data->parent_data;
662#else
663 data = NULL;
664#endif
665 } while (data);
666
667 if (data)
668 ret = chip->irq_set_vcpu_affinity(data, vcpu_info);
669 irq_put_desc_unlock(desc, flags);
670
671 return ret;
672}
673EXPORT_SYMBOL_GPL(irq_set_vcpu_affinity);
674
675void __disable_irq(struct irq_desc *desc)
676{
677 if (!desc->depth++)
678 irq_disable(desc);
679}
680
681static int __disable_irq_nosync(unsigned int irq)
682{
683 unsigned long flags;
684 struct irq_desc *desc = irq_get_desc_buslock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
685
686 if (!desc)
687 return -EINVAL;
688 __disable_irq(desc);
689 irq_put_desc_busunlock(desc, flags);
690 return 0;
691}
692
693/**
694 * disable_irq_nosync - disable an irq without waiting
695 * @irq: Interrupt to disable
696 *
697 * Disable the selected interrupt line. Disables and Enables are
698 * nested.
699 * Unlike disable_irq(), this function does not ensure existing
700 * instances of the IRQ handler have completed before returning.
701 *
702 * This function may be called from IRQ context.
703 */
704void disable_irq_nosync(unsigned int irq)
705{
706 __disable_irq_nosync(irq);
707}
708EXPORT_SYMBOL(disable_irq_nosync);
709
710/**
711 * disable_irq - disable an irq and wait for completion
712 * @irq: Interrupt to disable
713 *
714 * Disable the selected interrupt line. Enables and Disables are
715 * nested.
716 * This function waits for any pending IRQ handlers for this interrupt
717 * to complete before returning. If you use this function while
718 * holding a resource the IRQ handler may need you will deadlock.
719 *
720 * This function may be called - with care - from IRQ context.
721 */
722void disable_irq(unsigned int irq)
723{
724 if (!__disable_irq_nosync(irq))
725 synchronize_irq(irq);
726}
727EXPORT_SYMBOL(disable_irq);
728
729/**
730 * disable_hardirq - disables an irq and waits for hardirq completion
731 * @irq: Interrupt to disable
732 *
733 * Disable the selected interrupt line. Enables and Disables are
734 * nested.
735 * This function waits for any pending hard IRQ handlers for this
736 * interrupt to complete before returning. If you use this function while
737 * holding a resource the hard IRQ handler may need you will deadlock.
738 *
739 * When used to optimistically disable an interrupt from atomic context
740 * the return value must be checked.
741 *
742 * Returns: false if a threaded handler is active.
743 *
744 * This function may be called - with care - from IRQ context.
745 */
746bool disable_hardirq(unsigned int irq)
747{
748 if (!__disable_irq_nosync(irq))
749 return synchronize_hardirq(irq);
750
751 return false;
752}
753EXPORT_SYMBOL_GPL(disable_hardirq);
754
755/**
756 * disable_nmi_nosync - disable an nmi without waiting
757 * @irq: Interrupt to disable
758 *
759 * Disable the selected interrupt line. Disables and enables are
760 * nested.
761 * The interrupt to disable must have been requested through request_nmi.
762 * Unlike disable_nmi(), this function does not ensure existing
763 * instances of the IRQ handler have completed before returning.
764 */
765void disable_nmi_nosync(unsigned int irq)
766{
767 disable_irq_nosync(irq);
768}
769
770void __enable_irq(struct irq_desc *desc)
771{
772 switch (desc->depth) {
773 case 0:
774 err_out:
775 WARN(1, KERN_WARNING "Unbalanced enable for IRQ %d\n",
776 irq_desc_get_irq(desc));
777 break;
778 case 1: {
779 if (desc->istate & IRQS_SUSPENDED)
780 goto err_out;
781 /* Prevent probing on this irq: */
782 irq_settings_set_noprobe(desc);
783 /*
784 * Call irq_startup() not irq_enable() here because the
785 * interrupt might be marked NOAUTOEN. So irq_startup()
786 * needs to be invoked when it gets enabled the first
787 * time. If it was already started up, then irq_startup()
788 * will invoke irq_enable() under the hood.
789 */
790 irq_startup(desc, IRQ_RESEND, IRQ_START_FORCE);
791 break;
792 }
793 default:
794 desc->depth--;
795 }
796}
797
798/**
799 * enable_irq - enable handling of an irq
800 * @irq: Interrupt to enable
801 *
802 * Undoes the effect of one call to disable_irq(). If this
803 * matches the last disable, processing of interrupts on this
804 * IRQ line is re-enabled.
805 *
806 * This function may be called from IRQ context only when
807 * desc->irq_data.chip->bus_lock and desc->chip->bus_sync_unlock are NULL !
808 */
809void enable_irq(unsigned int irq)
810{
811 unsigned long flags;
812 struct irq_desc *desc = irq_get_desc_buslock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
813
814 if (!desc)
815 return;
816 if (WARN(!desc->irq_data.chip,
817 KERN_ERR "enable_irq before setup/request_irq: irq %u\n", irq))
818 goto out;
819
820 __enable_irq(desc);
821out:
822 irq_put_desc_busunlock(desc, flags);
823}
824EXPORT_SYMBOL(enable_irq);
825
826/**
827 * enable_nmi - enable handling of an nmi
828 * @irq: Interrupt to enable
829 *
830 * The interrupt to enable must have been requested through request_nmi.
831 * Undoes the effect of one call to disable_nmi(). If this
832 * matches the last disable, processing of interrupts on this
833 * IRQ line is re-enabled.
834 */
835void enable_nmi(unsigned int irq)
836{
837 enable_irq(irq);
838}
839
840static int set_irq_wake_real(unsigned int irq, unsigned int on)
841{
842 struct irq_desc *desc = irq_to_desc(irq);
843 int ret = -ENXIO;
844
845 if (irq_desc_get_chip(desc)->flags & IRQCHIP_SKIP_SET_WAKE)
846 return 0;
847
848 if (desc->irq_data.chip->irq_set_wake)
849 ret = desc->irq_data.chip->irq_set_wake(&desc->irq_data, on);
850
851 return ret;
852}
853
854/**
855 * irq_set_irq_wake - control irq power management wakeup
856 * @irq: interrupt to control
857 * @on: enable/disable power management wakeup
858 *
859 * Enable/disable power management wakeup mode, which is
860 * disabled by default. Enables and disables must match,
861 * just as they match for non-wakeup mode support.
862 *
863 * Wakeup mode lets this IRQ wake the system from sleep
864 * states like "suspend to RAM".
865 *
866 * Note: irq enable/disable state is completely orthogonal
867 * to the enable/disable state of irq wake. An irq can be
868 * disabled with disable_irq() and still wake the system as
869 * long as the irq has wake enabled. If this does not hold,
870 * then the underlying irq chip and the related driver need
871 * to be investigated.
872 */
873int irq_set_irq_wake(unsigned int irq, unsigned int on)
874{
875 unsigned long flags;
876 struct irq_desc *desc = irq_get_desc_buslock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
877 int ret = 0;
878
879 if (!desc)
880 return -EINVAL;
881
882 /* Don't use NMIs as wake up interrupts please */
883 if (desc->istate & IRQS_NMI) {
884 ret = -EINVAL;
885 goto out_unlock;
886 }
887
888 /* wakeup-capable irqs can be shared between drivers that
889 * don't need to have the same sleep mode behaviors.
890 */
891 if (on) {
892 if (desc->wake_depth++ == 0) {
893 ret = set_irq_wake_real(irq, on);
894 if (ret)
895 desc->wake_depth = 0;
896 else
897 irqd_set(&desc->irq_data, IRQD_WAKEUP_STATE);
898 }
899 } else {
900 if (desc->wake_depth == 0) {
901 WARN(1, "Unbalanced IRQ %d wake disable\n", irq);
902 } else if (--desc->wake_depth == 0) {
903 ret = set_irq_wake_real(irq, on);
904 if (ret)
905 desc->wake_depth = 1;
906 else
907 irqd_clear(&desc->irq_data, IRQD_WAKEUP_STATE);
908 }
909 }
910
911out_unlock:
912 irq_put_desc_busunlock(desc, flags);
913 return ret;
914}
915EXPORT_SYMBOL(irq_set_irq_wake);
916
917/*
918 * Internal function that tells the architecture code whether a
919 * particular irq has been exclusively allocated or is available
920 * for driver use.
921 */
922int can_request_irq(unsigned int irq, unsigned long irqflags)
923{
924 unsigned long flags;
925 struct irq_desc *desc = irq_get_desc_lock(irq, &flags, 0);
926 int canrequest = 0;
927
928 if (!desc)
929 return 0;
930
931 if (irq_settings_can_request(desc)) {
932 if (!desc->action ||
933 irqflags & desc->action->flags & IRQF_SHARED)
934 canrequest = 1;
935 }
936 irq_put_desc_unlock(desc, flags);
937 return canrequest;
938}
939
940int __irq_set_trigger(struct irq_desc *desc, unsigned long flags)
941{
942 struct irq_chip *chip = desc->irq_data.chip;
943 int ret, unmask = 0;
944
945 if (!chip || !chip->irq_set_type) {
946 /*
947 * IRQF_TRIGGER_* but the PIC does not support multiple
948 * flow-types?
949 */
950 pr_debug("No set_type function for IRQ %d (%s)\n",
951 irq_desc_get_irq(desc),
952 chip ? (chip->name ? : "unknown") : "unknown");
953 return 0;
954 }
955
956 if (chip->flags & IRQCHIP_SET_TYPE_MASKED) {
957 if (!irqd_irq_masked(&desc->irq_data))
958 mask_irq(desc);
959 if (!irqd_irq_disabled(&desc->irq_data))
960 unmask = 1;
961 }
962
963 /* Mask all flags except trigger mode */
964 flags &= IRQ_TYPE_SENSE_MASK;
965 ret = chip->irq_set_type(&desc->irq_data, flags);
966
967 switch (ret) {
968 case IRQ_SET_MASK_OK:
969 case IRQ_SET_MASK_OK_DONE:
970 irqd_clear(&desc->irq_data, IRQD_TRIGGER_MASK);
971 irqd_set(&desc->irq_data, flags);
972 fallthrough;
973
974 case IRQ_SET_MASK_OK_NOCOPY:
975 flags = irqd_get_trigger_type(&desc->irq_data);
976 irq_settings_set_trigger_mask(desc, flags);
977 irqd_clear(&desc->irq_data, IRQD_LEVEL);
978 irq_settings_clr_level(desc);
979 if (flags & IRQ_TYPE_LEVEL_MASK) {
980 irq_settings_set_level(desc);
981 irqd_set(&desc->irq_data, IRQD_LEVEL);
982 }
983
984 ret = 0;
985 break;
986 default:
987 pr_err("Setting trigger mode %lu for irq %u failed (%pS)\n",
988 flags, irq_desc_get_irq(desc), chip->irq_set_type);
989 }
990 if (unmask)
991 unmask_irq(desc);
992 return ret;
993}
994
995#ifdef CONFIG_HARDIRQS_SW_RESEND
996int irq_set_parent(int irq, int parent_irq)
997{
998 unsigned long flags;
999 struct irq_desc *desc = irq_get_desc_lock(irq, &flags, 0);
1000
1001 if (!desc)
1002 return -EINVAL;
1003
1004 desc->parent_irq = parent_irq;
1005
1006 irq_put_desc_unlock(desc, flags);
1007 return 0;
1008}
1009EXPORT_SYMBOL_GPL(irq_set_parent);
1010#endif
1011
1012/*
1013 * Default primary interrupt handler for threaded interrupts. Is
1014 * assigned as primary handler when request_threaded_irq is called
1015 * with handler == NULL. Useful for oneshot interrupts.
1016 */
1017static irqreturn_t irq_default_primary_handler(int irq, void *dev_id)
1018{
1019 return IRQ_WAKE_THREAD;
1020}
1021
1022/*
1023 * Primary handler for nested threaded interrupts. Should never be
1024 * called.
1025 */
1026static irqreturn_t irq_nested_primary_handler(int irq, void *dev_id)
1027{
1028 WARN(1, "Primary handler called for nested irq %d\n", irq);
1029 return IRQ_NONE;
1030}
1031
1032static irqreturn_t irq_forced_secondary_handler(int irq, void *dev_id)
1033{
1034 WARN(1, "Secondary action handler called for irq %d\n", irq);
1035 return IRQ_NONE;
1036}
1037
1038static int irq_wait_for_interrupt(struct irqaction *action)
1039{
1040 for (;;) {
1041 set_current_state(TASK_INTERRUPTIBLE);
1042
1043 if (kthread_should_stop()) {
1044 /* may need to run one last time */
1045 if (test_and_clear_bit(IRQTF_RUNTHREAD,
1046 &action->thread_flags)) {
1047 __set_current_state(TASK_RUNNING);
1048 return 0;
1049 }
1050 __set_current_state(TASK_RUNNING);
1051 return -1;
1052 }
1053
1054 if (test_and_clear_bit(IRQTF_RUNTHREAD,
1055 &action->thread_flags)) {
1056 __set_current_state(TASK_RUNNING);
1057 return 0;
1058 }
1059 schedule();
1060 }
1061}
1062
1063/*
1064 * Oneshot interrupts keep the irq line masked until the threaded
1065 * handler finished. unmask if the interrupt has not been disabled and
1066 * is marked MASKED.
1067 */
1068static void irq_finalize_oneshot(struct irq_desc *desc,
1069 struct irqaction *action)
1070{
1071 if (!(desc->istate & IRQS_ONESHOT) ||
1072 action->handler == irq_forced_secondary_handler)
1073 return;
1074again:
1075 chip_bus_lock(desc);
1076 raw_spin_lock_irq(&desc->lock);
1077
1078 /*
1079 * Implausible though it may be we need to protect us against
1080 * the following scenario:
1081 *
1082 * The thread is faster done than the hard interrupt handler
1083 * on the other CPU. If we unmask the irq line then the
1084 * interrupt can come in again and masks the line, leaves due
1085 * to IRQS_INPROGRESS and the irq line is masked forever.
1086 *
1087 * This also serializes the state of shared oneshot handlers
1088 * versus "desc->threads_oneshot |= action->thread_mask;" in
1089 * irq_wake_thread(). See the comment there which explains the
1090 * serialization.
1091 */
1092 if (unlikely(irqd_irq_inprogress(&desc->irq_data))) {
1093 raw_spin_unlock_irq(&desc->lock);
1094 chip_bus_sync_unlock(desc);
1095 cpu_relax();
1096 goto again;
1097 }
1098
1099 /*
1100 * Now check again, whether the thread should run. Otherwise
1101 * we would clear the threads_oneshot bit of this thread which
1102 * was just set.
1103 */
1104 if (test_bit(IRQTF_RUNTHREAD, &action->thread_flags))
1105 goto out_unlock;
1106
1107 desc->threads_oneshot &= ~action->thread_mask;
1108
1109 if (!desc->threads_oneshot && !irqd_irq_disabled(&desc->irq_data) &&
1110 irqd_irq_masked(&desc->irq_data))
1111 unmask_threaded_irq(desc);
1112
1113out_unlock:
1114 raw_spin_unlock_irq(&desc->lock);
1115 chip_bus_sync_unlock(desc);
1116}
1117
1118#ifdef CONFIG_SMP
1119/*
1120 * Check whether we need to change the affinity of the interrupt thread.
1121 */
1122static void
1123irq_thread_check_affinity(struct irq_desc *desc, struct irqaction *action)
1124{
1125 cpumask_var_t mask;
1126 bool valid = true;
1127
1128 if (!test_and_clear_bit(IRQTF_AFFINITY, &action->thread_flags))
1129 return;
1130
1131 /*
1132 * In case we are out of memory we set IRQTF_AFFINITY again and
1133 * try again next time
1134 */
1135 if (!alloc_cpumask_var(&mask, GFP_KERNEL)) {
1136 set_bit(IRQTF_AFFINITY, &action->thread_flags);
1137 return;
1138 }
1139
1140 raw_spin_lock_irq(&desc->lock);
1141 /*
1142 * This code is triggered unconditionally. Check the affinity
1143 * mask pointer. For CPU_MASK_OFFSTACK=n this is optimized out.
1144 */
1145 if (cpumask_available(desc->irq_common_data.affinity)) {
1146 const struct cpumask *m;
1147
1148 m = irq_data_get_effective_affinity_mask(&desc->irq_data);
1149 cpumask_copy(mask, m);
1150 } else {
1151 valid = false;
1152 }
1153 raw_spin_unlock_irq(&desc->lock);
1154
1155 if (valid)
1156 set_cpus_allowed_ptr(current, mask);
1157 free_cpumask_var(mask);
1158}
1159#else
1160static inline void
1161irq_thread_check_affinity(struct irq_desc *desc, struct irqaction *action) { }
1162#endif
1163
1164/*
1165 * Interrupts which are not explicitly requested as threaded
1166 * interrupts rely on the implicit bh/preempt disable of the hard irq
1167 * context. So we need to disable bh here to avoid deadlocks and other
1168 * side effects.
1169 */
1170static irqreturn_t
1171irq_forced_thread_fn(struct irq_desc *desc, struct irqaction *action)
1172{
1173 irqreturn_t ret;
1174
1175 local_bh_disable();
1176 if (!IS_ENABLED(CONFIG_PREEMPT_RT))
1177 local_irq_disable();
1178 ret = action->thread_fn(action->irq, action->dev_id);
1179 if (ret == IRQ_HANDLED)
1180 atomic_inc(&desc->threads_handled);
1181
1182 irq_finalize_oneshot(desc, action);
1183 if (!IS_ENABLED(CONFIG_PREEMPT_RT))
1184 local_irq_enable();
1185 local_bh_enable();
1186 return ret;
1187}
1188
1189/*
1190 * Interrupts explicitly requested as threaded interrupts want to be
1191 * preemptible - many of them need to sleep and wait for slow busses to
1192 * complete.
1193 */
1194static irqreturn_t irq_thread_fn(struct irq_desc *desc,
1195 struct irqaction *action)
1196{
1197 irqreturn_t ret;
1198
1199 ret = action->thread_fn(action->irq, action->dev_id);
1200 if (ret == IRQ_HANDLED)
1201 atomic_inc(&desc->threads_handled);
1202
1203 irq_finalize_oneshot(desc, action);
1204 return ret;
1205}
1206
1207static void wake_threads_waitq(struct irq_desc *desc)
1208{
1209 if (atomic_dec_and_test(&desc->threads_active))
1210 wake_up(&desc->wait_for_threads);
1211}
1212
1213static void irq_thread_dtor(struct callback_head *unused)
1214{
1215 struct task_struct *tsk = current;
1216 struct irq_desc *desc;
1217 struct irqaction *action;
1218
1219 if (WARN_ON_ONCE(!(current->flags & PF_EXITING)))
1220 return;
1221
1222 action = kthread_data(tsk);
1223
1224 pr_err("exiting task \"%s\" (%d) is an active IRQ thread (irq %d)\n",
1225 tsk->comm, tsk->pid, action->irq);
1226
1227
1228 desc = irq_to_desc(action->irq);
1229 /*
1230 * If IRQTF_RUNTHREAD is set, we need to decrement
1231 * desc->threads_active and wake possible waiters.
1232 */
1233 if (test_and_clear_bit(IRQTF_RUNTHREAD, &action->thread_flags))
1234 wake_threads_waitq(desc);
1235
1236 /* Prevent a stale desc->threads_oneshot */
1237 irq_finalize_oneshot(desc, action);
1238}
1239
1240static void irq_wake_secondary(struct irq_desc *desc, struct irqaction *action)
1241{
1242 struct irqaction *secondary = action->secondary;
1243
1244 if (WARN_ON_ONCE(!secondary))
1245 return;
1246
1247 raw_spin_lock_irq(&desc->lock);
1248 __irq_wake_thread(desc, secondary);
1249 raw_spin_unlock_irq(&desc->lock);
1250}
1251
1252/*
1253 * Interrupt handler thread
1254 */
1255static int irq_thread(void *data)
1256{
1257 struct callback_head on_exit_work;
1258 struct irqaction *action = data;
1259 struct irq_desc *desc = irq_to_desc(action->irq);
1260 irqreturn_t (*handler_fn)(struct irq_desc *desc,
1261 struct irqaction *action);
1262
1263 if (force_irqthreads && test_bit(IRQTF_FORCED_THREAD,
1264 &action->thread_flags))
1265 handler_fn = irq_forced_thread_fn;
1266 else
1267 handler_fn = irq_thread_fn;
1268
1269 init_task_work(&on_exit_work, irq_thread_dtor);
1270 task_work_add(current, &on_exit_work, TWA_NONE);
1271
1272 irq_thread_check_affinity(desc, action);
1273
1274 while (!irq_wait_for_interrupt(action)) {
1275 irqreturn_t action_ret;
1276
1277 irq_thread_check_affinity(desc, action);
1278
1279 action_ret = handler_fn(desc, action);
1280 if (action_ret == IRQ_WAKE_THREAD)
1281 irq_wake_secondary(desc, action);
1282
1283 wake_threads_waitq(desc);
1284 }
1285
1286 /*
1287 * This is the regular exit path. __free_irq() is stopping the
1288 * thread via kthread_stop() after calling
1289 * synchronize_hardirq(). So neither IRQTF_RUNTHREAD nor the
1290 * oneshot mask bit can be set.
1291 */
1292 task_work_cancel(current, irq_thread_dtor);
1293 return 0;
1294}
1295
1296/**
1297 * irq_wake_thread - wake the irq thread for the action identified by dev_id
1298 * @irq: Interrupt line
1299 * @dev_id: Device identity for which the thread should be woken
1300 *
1301 */
1302void irq_wake_thread(unsigned int irq, void *dev_id)
1303{
1304 struct irq_desc *desc = irq_to_desc(irq);
1305 struct irqaction *action;
1306 unsigned long flags;
1307
1308 if (!desc || WARN_ON(irq_settings_is_per_cpu_devid(desc)))
1309 return;
1310
1311 raw_spin_lock_irqsave(&desc->lock, flags);
1312 for_each_action_of_desc(desc, action) {
1313 if (action->dev_id == dev_id) {
1314 if (action->thread)
1315 __irq_wake_thread(desc, action);
1316 break;
1317 }
1318 }
1319 raw_spin_unlock_irqrestore(&desc->lock, flags);
1320}
1321EXPORT_SYMBOL_GPL(irq_wake_thread);
1322
1323static int irq_setup_forced_threading(struct irqaction *new)
1324{
1325 if (!force_irqthreads)
1326 return 0;
1327 if (new->flags & (IRQF_NO_THREAD | IRQF_PERCPU | IRQF_ONESHOT))
1328 return 0;
1329
1330 /*
1331 * No further action required for interrupts which are requested as
1332 * threaded interrupts already
1333 */
1334 if (new->handler == irq_default_primary_handler)
1335 return 0;
1336
1337 new->flags |= IRQF_ONESHOT;
1338
1339 /*
1340 * Handle the case where we have a real primary handler and a
1341 * thread handler. We force thread them as well by creating a
1342 * secondary action.
1343 */
1344 if (new->handler && new->thread_fn) {
1345 /* Allocate the secondary action */
1346 new->secondary = kzalloc(sizeof(struct irqaction), GFP_KERNEL);
1347 if (!new->secondary)
1348 return -ENOMEM;
1349 new->secondary->handler = irq_forced_secondary_handler;
1350 new->secondary->thread_fn = new->thread_fn;
1351 new->secondary->dev_id = new->dev_id;
1352 new->secondary->irq = new->irq;
1353 new->secondary->name = new->name;
1354 }
1355 /* Deal with the primary handler */
1356 set_bit(IRQTF_FORCED_THREAD, &new->thread_flags);
1357 new->thread_fn = new->handler;
1358 new->handler = irq_default_primary_handler;
1359 return 0;
1360}
1361
1362static int irq_request_resources(struct irq_desc *desc)
1363{
1364 struct irq_data *d = &desc->irq_data;
1365 struct irq_chip *c = d->chip;
1366
1367 return c->irq_request_resources ? c->irq_request_resources(d) : 0;
1368}
1369
1370static void irq_release_resources(struct irq_desc *desc)
1371{
1372 struct irq_data *d = &desc->irq_data;
1373 struct irq_chip *c = d->chip;
1374
1375 if (c->irq_release_resources)
1376 c->irq_release_resources(d);
1377}
1378
1379static bool irq_supports_nmi(struct irq_desc *desc)
1380{
1381 struct irq_data *d = irq_desc_get_irq_data(desc);
1382
1383#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
1384 /* Only IRQs directly managed by the root irqchip can be set as NMI */
1385 if (d->parent_data)
1386 return false;
1387#endif
1388 /* Don't support NMIs for chips behind a slow bus */
1389 if (d->chip->irq_bus_lock || d->chip->irq_bus_sync_unlock)
1390 return false;
1391
1392 return d->chip->flags & IRQCHIP_SUPPORTS_NMI;
1393}
1394
1395static int irq_nmi_setup(struct irq_desc *desc)
1396{
1397 struct irq_data *d = irq_desc_get_irq_data(desc);
1398 struct irq_chip *c = d->chip;
1399
1400 return c->irq_nmi_setup ? c->irq_nmi_setup(d) : -EINVAL;
1401}
1402
1403static void irq_nmi_teardown(struct irq_desc *desc)
1404{
1405 struct irq_data *d = irq_desc_get_irq_data(desc);
1406 struct irq_chip *c = d->chip;
1407
1408 if (c->irq_nmi_teardown)
1409 c->irq_nmi_teardown(d);
1410}
1411
1412static int
1413setup_irq_thread(struct irqaction *new, unsigned int irq, bool secondary)
1414{
1415 struct task_struct *t;
1416
1417 if (!secondary) {
1418 t = kthread_create(irq_thread, new, "irq/%d-%s", irq,
1419 new->name);
1420 } else {
1421 t = kthread_create(irq_thread, new, "irq/%d-s-%s", irq,
1422 new->name);
1423 }
1424
1425 if (IS_ERR(t))
1426 return PTR_ERR(t);
1427
1428 sched_set_fifo(t);
1429
1430 /*
1431 * We keep the reference to the task struct even if
1432 * the thread dies to avoid that the interrupt code
1433 * references an already freed task_struct.
1434 */
1435 new->thread = get_task_struct(t);
1436 /*
1437 * Tell the thread to set its affinity. This is
1438 * important for shared interrupt handlers as we do
1439 * not invoke setup_affinity() for the secondary
1440 * handlers as everything is already set up. Even for
1441 * interrupts marked with IRQF_NO_BALANCE this is
1442 * correct as we want the thread to move to the cpu(s)
1443 * on which the requesting code placed the interrupt.
1444 */
1445 set_bit(IRQTF_AFFINITY, &new->thread_flags);
1446 return 0;
1447}
1448
1449/*
1450 * Internal function to register an irqaction - typically used to
1451 * allocate special interrupts that are part of the architecture.
1452 *
1453 * Locking rules:
1454 *
1455 * desc->request_mutex Provides serialization against a concurrent free_irq()
1456 * chip_bus_lock Provides serialization for slow bus operations
1457 * desc->lock Provides serialization against hard interrupts
1458 *
1459 * chip_bus_lock and desc->lock are sufficient for all other management and
1460 * interrupt related functions. desc->request_mutex solely serializes
1461 * request/free_irq().
1462 */
1463static int
1464__setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new)
1465{
1466 struct irqaction *old, **old_ptr;
1467 unsigned long flags, thread_mask = 0;
1468 int ret, nested, shared = 0;
1469
1470 if (!desc)
1471 return -EINVAL;
1472
1473 if (desc->irq_data.chip == &no_irq_chip)
1474 return -ENOSYS;
1475 if (!try_module_get(desc->owner))
1476 return -ENODEV;
1477
1478 new->irq = irq;
1479
1480 /*
1481 * If the trigger type is not specified by the caller,
1482 * then use the default for this interrupt.
1483 */
1484 if (!(new->flags & IRQF_TRIGGER_MASK))
1485 new->flags |= irqd_get_trigger_type(&desc->irq_data);
1486
1487 /*
1488 * Check whether the interrupt nests into another interrupt
1489 * thread.
1490 */
1491 nested = irq_settings_is_nested_thread(desc);
1492 if (nested) {
1493 if (!new->thread_fn) {
1494 ret = -EINVAL;
1495 goto out_mput;
1496 }
1497 /*
1498 * Replace the primary handler which was provided from
1499 * the driver for non nested interrupt handling by the
1500 * dummy function which warns when called.
1501 */
1502 new->handler = irq_nested_primary_handler;
1503 } else {
1504 if (irq_settings_can_thread(desc)) {
1505 ret = irq_setup_forced_threading(new);
1506 if (ret)
1507 goto out_mput;
1508 }
1509 }
1510
1511 /*
1512 * Create a handler thread when a thread function is supplied
1513 * and the interrupt does not nest into another interrupt
1514 * thread.
1515 */
1516 if (new->thread_fn && !nested) {
1517 ret = setup_irq_thread(new, irq, false);
1518 if (ret)
1519 goto out_mput;
1520 if (new->secondary) {
1521 ret = setup_irq_thread(new->secondary, irq, true);
1522 if (ret)
1523 goto out_thread;
1524 }
1525 }
1526
1527 /*
1528 * Drivers are often written to work w/o knowledge about the
1529 * underlying irq chip implementation, so a request for a
1530 * threaded irq without a primary hard irq context handler
1531 * requires the ONESHOT flag to be set. Some irq chips like
1532 * MSI based interrupts are per se one shot safe. Check the
1533 * chip flags, so we can avoid the unmask dance at the end of
1534 * the threaded handler for those.
1535 */
1536 if (desc->irq_data.chip->flags & IRQCHIP_ONESHOT_SAFE)
1537 new->flags &= ~IRQF_ONESHOT;
1538
1539 /*
1540 * Protects against a concurrent __free_irq() call which might wait
1541 * for synchronize_hardirq() to complete without holding the optional
1542 * chip bus lock and desc->lock. Also protects against handing out
1543 * a recycled oneshot thread_mask bit while it's still in use by
1544 * its previous owner.
1545 */
1546 mutex_lock(&desc->request_mutex);
1547
1548 /*
1549 * Acquire bus lock as the irq_request_resources() callback below
1550 * might rely on the serialization or the magic power management
1551 * functions which are abusing the irq_bus_lock() callback,
1552 */
1553 chip_bus_lock(desc);
1554
1555 /* First installed action requests resources. */
1556 if (!desc->action) {
1557 ret = irq_request_resources(desc);
1558 if (ret) {
1559 pr_err("Failed to request resources for %s (irq %d) on irqchip %s\n",
1560 new->name, irq, desc->irq_data.chip->name);
1561 goto out_bus_unlock;
1562 }
1563 }
1564
1565 /*
1566 * The following block of code has to be executed atomically
1567 * protected against a concurrent interrupt and any of the other
1568 * management calls which are not serialized via
1569 * desc->request_mutex or the optional bus lock.
1570 */
1571 raw_spin_lock_irqsave(&desc->lock, flags);
1572 old_ptr = &desc->action;
1573 old = *old_ptr;
1574 if (old) {
1575 /*
1576 * Can't share interrupts unless both agree to and are
1577 * the same type (level, edge, polarity). So both flag
1578 * fields must have IRQF_SHARED set and the bits which
1579 * set the trigger type must match. Also all must
1580 * agree on ONESHOT.
1581 * Interrupt lines used for NMIs cannot be shared.
1582 */
1583 unsigned int oldtype;
1584
1585 if (desc->istate & IRQS_NMI) {
1586 pr_err("Invalid attempt to share NMI for %s (irq %d) on irqchip %s.\n",
1587 new->name, irq, desc->irq_data.chip->name);
1588 ret = -EINVAL;
1589 goto out_unlock;
1590 }
1591
1592 /*
1593 * If nobody did set the configuration before, inherit
1594 * the one provided by the requester.
1595 */
1596 if (irqd_trigger_type_was_set(&desc->irq_data)) {
1597 oldtype = irqd_get_trigger_type(&desc->irq_data);
1598 } else {
1599 oldtype = new->flags & IRQF_TRIGGER_MASK;
1600 irqd_set_trigger_type(&desc->irq_data, oldtype);
1601 }
1602
1603 if (!((old->flags & new->flags) & IRQF_SHARED) ||
1604 (oldtype != (new->flags & IRQF_TRIGGER_MASK)) ||
1605 ((old->flags ^ new->flags) & IRQF_ONESHOT))
1606 goto mismatch;
1607
1608 /* All handlers must agree on per-cpuness */
1609 if ((old->flags & IRQF_PERCPU) !=
1610 (new->flags & IRQF_PERCPU))
1611 goto mismatch;
1612
1613 /* add new interrupt at end of irq queue */
1614 do {
1615 /*
1616 * Or all existing action->thread_mask bits,
1617 * so we can find the next zero bit for this
1618 * new action.
1619 */
1620 thread_mask |= old->thread_mask;
1621 old_ptr = &old->next;
1622 old = *old_ptr;
1623 } while (old);
1624 shared = 1;
1625 }
1626
1627 /*
1628 * Setup the thread mask for this irqaction for ONESHOT. For
1629 * !ONESHOT irqs the thread mask is 0 so we can avoid a
1630 * conditional in irq_wake_thread().
1631 */
1632 if (new->flags & IRQF_ONESHOT) {
1633 /*
1634 * Unlikely to have 32 resp 64 irqs sharing one line,
1635 * but who knows.
1636 */
1637 if (thread_mask == ~0UL) {
1638 ret = -EBUSY;
1639 goto out_unlock;
1640 }
1641 /*
1642 * The thread_mask for the action is or'ed to
1643 * desc->thread_active to indicate that the
1644 * IRQF_ONESHOT thread handler has been woken, but not
1645 * yet finished. The bit is cleared when a thread
1646 * completes. When all threads of a shared interrupt
1647 * line have completed desc->threads_active becomes
1648 * zero and the interrupt line is unmasked. See
1649 * handle.c:irq_wake_thread() for further information.
1650 *
1651 * If no thread is woken by primary (hard irq context)
1652 * interrupt handlers, then desc->threads_active is
1653 * also checked for zero to unmask the irq line in the
1654 * affected hard irq flow handlers
1655 * (handle_[fasteoi|level]_irq).
1656 *
1657 * The new action gets the first zero bit of
1658 * thread_mask assigned. See the loop above which or's
1659 * all existing action->thread_mask bits.
1660 */
1661 new->thread_mask = 1UL << ffz(thread_mask);
1662
1663 } else if (new->handler == irq_default_primary_handler &&
1664 !(desc->irq_data.chip->flags & IRQCHIP_ONESHOT_SAFE)) {
1665 /*
1666 * The interrupt was requested with handler = NULL, so
1667 * we use the default primary handler for it. But it
1668 * does not have the oneshot flag set. In combination
1669 * with level interrupts this is deadly, because the
1670 * default primary handler just wakes the thread, then
1671 * the irq lines is reenabled, but the device still
1672 * has the level irq asserted. Rinse and repeat....
1673 *
1674 * While this works for edge type interrupts, we play
1675 * it safe and reject unconditionally because we can't
1676 * say for sure which type this interrupt really
1677 * has. The type flags are unreliable as the
1678 * underlying chip implementation can override them.
1679 */
1680 pr_err("Threaded irq requested with handler=NULL and !ONESHOT for %s (irq %d)\n",
1681 new->name, irq);
1682 ret = -EINVAL;
1683 goto out_unlock;
1684 }
1685
1686 if (!shared) {
1687 init_waitqueue_head(&desc->wait_for_threads);
1688
1689 /* Setup the type (level, edge polarity) if configured: */
1690 if (new->flags & IRQF_TRIGGER_MASK) {
1691 ret = __irq_set_trigger(desc,
1692 new->flags & IRQF_TRIGGER_MASK);
1693
1694 if (ret)
1695 goto out_unlock;
1696 }
1697
1698 /*
1699 * Activate the interrupt. That activation must happen
1700 * independently of IRQ_NOAUTOEN. request_irq() can fail
1701 * and the callers are supposed to handle
1702 * that. enable_irq() of an interrupt requested with
1703 * IRQ_NOAUTOEN is not supposed to fail. The activation
1704 * keeps it in shutdown mode, it merily associates
1705 * resources if necessary and if that's not possible it
1706 * fails. Interrupts which are in managed shutdown mode
1707 * will simply ignore that activation request.
1708 */
1709 ret = irq_activate(desc);
1710 if (ret)
1711 goto out_unlock;
1712
1713 desc->istate &= ~(IRQS_AUTODETECT | IRQS_SPURIOUS_DISABLED | \
1714 IRQS_ONESHOT | IRQS_WAITING);
1715 irqd_clear(&desc->irq_data, IRQD_IRQ_INPROGRESS);
1716
1717 if (new->flags & IRQF_PERCPU) {
1718 irqd_set(&desc->irq_data, IRQD_PER_CPU);
1719 irq_settings_set_per_cpu(desc);
1720 if (new->flags & IRQF_NO_DEBUG)
1721 irq_settings_set_no_debug(desc);
1722 }
1723
1724 if (noirqdebug)
1725 irq_settings_set_no_debug(desc);
1726
1727 if (new->flags & IRQF_ONESHOT)
1728 desc->istate |= IRQS_ONESHOT;
1729
1730 /* Exclude IRQ from balancing if requested */
1731 if (new->flags & IRQF_NOBALANCING) {
1732 irq_settings_set_no_balancing(desc);
1733 irqd_set(&desc->irq_data, IRQD_NO_BALANCING);
1734 }
1735
1736 if (!(new->flags & IRQF_NO_AUTOEN) &&
1737 irq_settings_can_autoenable(desc)) {
1738 irq_startup(desc, IRQ_RESEND, IRQ_START_COND);
1739 } else {
1740 /*
1741 * Shared interrupts do not go well with disabling
1742 * auto enable. The sharing interrupt might request
1743 * it while it's still disabled and then wait for
1744 * interrupts forever.
1745 */
1746 WARN_ON_ONCE(new->flags & IRQF_SHARED);
1747 /* Undo nested disables: */
1748 desc->depth = 1;
1749 }
1750
1751 } else if (new->flags & IRQF_TRIGGER_MASK) {
1752 unsigned int nmsk = new->flags & IRQF_TRIGGER_MASK;
1753 unsigned int omsk = irqd_get_trigger_type(&desc->irq_data);
1754
1755 if (nmsk != omsk)
1756 /* hope the handler works with current trigger mode */
1757 pr_warn("irq %d uses trigger mode %u; requested %u\n",
1758 irq, omsk, nmsk);
1759 }
1760
1761 *old_ptr = new;
1762
1763 irq_pm_install_action(desc, new);
1764
1765 /* Reset broken irq detection when installing new handler */
1766 desc->irq_count = 0;
1767 desc->irqs_unhandled = 0;
1768
1769 /*
1770 * Check whether we disabled the irq via the spurious handler
1771 * before. Reenable it and give it another chance.
1772 */
1773 if (shared && (desc->istate & IRQS_SPURIOUS_DISABLED)) {
1774 desc->istate &= ~IRQS_SPURIOUS_DISABLED;
1775 __enable_irq(desc);
1776 }
1777
1778 raw_spin_unlock_irqrestore(&desc->lock, flags);
1779 chip_bus_sync_unlock(desc);
1780 mutex_unlock(&desc->request_mutex);
1781
1782 irq_setup_timings(desc, new);
1783
1784 /*
1785 * Strictly no need to wake it up, but hung_task complains
1786 * when no hard interrupt wakes the thread up.
1787 */
1788 if (new->thread)
1789 wake_up_process(new->thread);
1790 if (new->secondary)
1791 wake_up_process(new->secondary->thread);
1792
1793 register_irq_proc(irq, desc);
1794 new->dir = NULL;
1795 register_handler_proc(irq, new);
1796 return 0;
1797
1798mismatch:
1799 if (!(new->flags & IRQF_PROBE_SHARED)) {
1800 pr_err("Flags mismatch irq %d. %08x (%s) vs. %08x (%s)\n",
1801 irq, new->flags, new->name, old->flags, old->name);
1802#ifdef CONFIG_DEBUG_SHIRQ
1803 dump_stack();
1804#endif
1805 }
1806 ret = -EBUSY;
1807
1808out_unlock:
1809 raw_spin_unlock_irqrestore(&desc->lock, flags);
1810
1811 if (!desc->action)
1812 irq_release_resources(desc);
1813out_bus_unlock:
1814 chip_bus_sync_unlock(desc);
1815 mutex_unlock(&desc->request_mutex);
1816
1817out_thread:
1818 if (new->thread) {
1819 struct task_struct *t = new->thread;
1820
1821 new->thread = NULL;
1822 kthread_stop(t);
1823 put_task_struct(t);
1824 }
1825 if (new->secondary && new->secondary->thread) {
1826 struct task_struct *t = new->secondary->thread;
1827
1828 new->secondary->thread = NULL;
1829 kthread_stop(t);
1830 put_task_struct(t);
1831 }
1832out_mput:
1833 module_put(desc->owner);
1834 return ret;
1835}
1836
1837/*
1838 * Internal function to unregister an irqaction - used to free
1839 * regular and special interrupts that are part of the architecture.
1840 */
1841static struct irqaction *__free_irq(struct irq_desc *desc, void *dev_id)
1842{
1843 unsigned irq = desc->irq_data.irq;
1844 struct irqaction *action, **action_ptr;
1845 unsigned long flags;
1846
1847 WARN(in_interrupt(), "Trying to free IRQ %d from IRQ context!\n", irq);
1848
1849 mutex_lock(&desc->request_mutex);
1850 chip_bus_lock(desc);
1851 raw_spin_lock_irqsave(&desc->lock, flags);
1852
1853 /*
1854 * There can be multiple actions per IRQ descriptor, find the right
1855 * one based on the dev_id:
1856 */
1857 action_ptr = &desc->action;
1858 for (;;) {
1859 action = *action_ptr;
1860
1861 if (!action) {
1862 WARN(1, "Trying to free already-free IRQ %d\n", irq);
1863 raw_spin_unlock_irqrestore(&desc->lock, flags);
1864 chip_bus_sync_unlock(desc);
1865 mutex_unlock(&desc->request_mutex);
1866 return NULL;
1867 }
1868
1869 if (action->dev_id == dev_id)
1870 break;
1871 action_ptr = &action->next;
1872 }
1873
1874 /* Found it - now remove it from the list of entries: */
1875 *action_ptr = action->next;
1876
1877 irq_pm_remove_action(desc, action);
1878
1879 /* If this was the last handler, shut down the IRQ line: */
1880 if (!desc->action) {
1881 irq_settings_clr_disable_unlazy(desc);
1882 /* Only shutdown. Deactivate after synchronize_hardirq() */
1883 irq_shutdown(desc);
1884 }
1885
1886#ifdef CONFIG_SMP
1887 /* make sure affinity_hint is cleaned up */
1888 if (WARN_ON_ONCE(desc->affinity_hint))
1889 desc->affinity_hint = NULL;
1890#endif
1891
1892 raw_spin_unlock_irqrestore(&desc->lock, flags);
1893 /*
1894 * Drop bus_lock here so the changes which were done in the chip
1895 * callbacks above are synced out to the irq chips which hang
1896 * behind a slow bus (I2C, SPI) before calling synchronize_hardirq().
1897 *
1898 * Aside of that the bus_lock can also be taken from the threaded
1899 * handler in irq_finalize_oneshot() which results in a deadlock
1900 * because kthread_stop() would wait forever for the thread to
1901 * complete, which is blocked on the bus lock.
1902 *
1903 * The still held desc->request_mutex() protects against a
1904 * concurrent request_irq() of this irq so the release of resources
1905 * and timing data is properly serialized.
1906 */
1907 chip_bus_sync_unlock(desc);
1908
1909 unregister_handler_proc(irq, action);
1910
1911 /*
1912 * Make sure it's not being used on another CPU and if the chip
1913 * supports it also make sure that there is no (not yet serviced)
1914 * interrupt in flight at the hardware level.
1915 */
1916 __synchronize_hardirq(desc, true);
1917
1918#ifdef CONFIG_DEBUG_SHIRQ
1919 /*
1920 * It's a shared IRQ -- the driver ought to be prepared for an IRQ
1921 * event to happen even now it's being freed, so let's make sure that
1922 * is so by doing an extra call to the handler ....
1923 *
1924 * ( We do this after actually deregistering it, to make sure that a
1925 * 'real' IRQ doesn't run in parallel with our fake. )
1926 */
1927 if (action->flags & IRQF_SHARED) {
1928 local_irq_save(flags);
1929 action->handler(irq, dev_id);
1930 local_irq_restore(flags);
1931 }
1932#endif
1933
1934 /*
1935 * The action has already been removed above, but the thread writes
1936 * its oneshot mask bit when it completes. Though request_mutex is
1937 * held across this which prevents __setup_irq() from handing out
1938 * the same bit to a newly requested action.
1939 */
1940 if (action->thread) {
1941 kthread_stop(action->thread);
1942 put_task_struct(action->thread);
1943 if (action->secondary && action->secondary->thread) {
1944 kthread_stop(action->secondary->thread);
1945 put_task_struct(action->secondary->thread);
1946 }
1947 }
1948
1949 /* Last action releases resources */
1950 if (!desc->action) {
1951 /*
1952 * Reacquire bus lock as irq_release_resources() might
1953 * require it to deallocate resources over the slow bus.
1954 */
1955 chip_bus_lock(desc);
1956 /*
1957 * There is no interrupt on the fly anymore. Deactivate it
1958 * completely.
1959 */
1960 raw_spin_lock_irqsave(&desc->lock, flags);
1961 irq_domain_deactivate_irq(&desc->irq_data);
1962 raw_spin_unlock_irqrestore(&desc->lock, flags);
1963
1964 irq_release_resources(desc);
1965 chip_bus_sync_unlock(desc);
1966 irq_remove_timings(desc);
1967 }
1968
1969 mutex_unlock(&desc->request_mutex);
1970
1971 irq_chip_pm_put(&desc->irq_data);
1972 module_put(desc->owner);
1973 kfree(action->secondary);
1974 return action;
1975}
1976
1977/**
1978 * free_irq - free an interrupt allocated with request_irq
1979 * @irq: Interrupt line to free
1980 * @dev_id: Device identity to free
1981 *
1982 * Remove an interrupt handler. The handler is removed and if the
1983 * interrupt line is no longer in use by any driver it is disabled.
1984 * On a shared IRQ the caller must ensure the interrupt is disabled
1985 * on the card it drives before calling this function. The function
1986 * does not return until any executing interrupts for this IRQ
1987 * have completed.
1988 *
1989 * This function must not be called from interrupt context.
1990 *
1991 * Returns the devname argument passed to request_irq.
1992 */
1993const void *free_irq(unsigned int irq, void *dev_id)
1994{
1995 struct irq_desc *desc = irq_to_desc(irq);
1996 struct irqaction *action;
1997 const char *devname;
1998
1999 if (!desc || WARN_ON(irq_settings_is_per_cpu_devid(desc)))
2000 return NULL;
2001
2002#ifdef CONFIG_SMP
2003 if (WARN_ON(desc->affinity_notify))
2004 desc->affinity_notify = NULL;
2005#endif
2006
2007 action = __free_irq(desc, dev_id);
2008
2009 if (!action)
2010 return NULL;
2011
2012 devname = action->name;
2013 kfree(action);
2014 return devname;
2015}
2016EXPORT_SYMBOL(free_irq);
2017
2018/* This function must be called with desc->lock held */
2019static const void *__cleanup_nmi(unsigned int irq, struct irq_desc *desc)
2020{
2021 const char *devname = NULL;
2022
2023 desc->istate &= ~IRQS_NMI;
2024
2025 if (!WARN_ON(desc->action == NULL)) {
2026 irq_pm_remove_action(desc, desc->action);
2027 devname = desc->action->name;
2028 unregister_handler_proc(irq, desc->action);
2029
2030 kfree(desc->action);
2031 desc->action = NULL;
2032 }
2033
2034 irq_settings_clr_disable_unlazy(desc);
2035 irq_shutdown_and_deactivate(desc);
2036
2037 irq_release_resources(desc);
2038
2039 irq_chip_pm_put(&desc->irq_data);
2040 module_put(desc->owner);
2041
2042 return devname;
2043}
2044
2045const void *free_nmi(unsigned int irq, void *dev_id)
2046{
2047 struct irq_desc *desc = irq_to_desc(irq);
2048 unsigned long flags;
2049 const void *devname;
2050
2051 if (!desc || WARN_ON(!(desc->istate & IRQS_NMI)))
2052 return NULL;
2053
2054 if (WARN_ON(irq_settings_is_per_cpu_devid(desc)))
2055 return NULL;
2056
2057 /* NMI still enabled */
2058 if (WARN_ON(desc->depth == 0))
2059 disable_nmi_nosync(irq);
2060
2061 raw_spin_lock_irqsave(&desc->lock, flags);
2062
2063 irq_nmi_teardown(desc);
2064 devname = __cleanup_nmi(irq, desc);
2065
2066 raw_spin_unlock_irqrestore(&desc->lock, flags);
2067
2068 return devname;
2069}
2070
2071/**
2072 * request_threaded_irq - allocate an interrupt line
2073 * @irq: Interrupt line to allocate
2074 * @handler: Function to be called when the IRQ occurs.
2075 * Primary handler for threaded interrupts
2076 * If NULL and thread_fn != NULL the default
2077 * primary handler is installed
2078 * @thread_fn: Function called from the irq handler thread
2079 * If NULL, no irq thread is created
2080 * @irqflags: Interrupt type flags
2081 * @devname: An ascii name for the claiming device
2082 * @dev_id: A cookie passed back to the handler function
2083 *
2084 * This call allocates interrupt resources and enables the
2085 * interrupt line and IRQ handling. From the point this
2086 * call is made your handler function may be invoked. Since
2087 * your handler function must clear any interrupt the board
2088 * raises, you must take care both to initialise your hardware
2089 * and to set up the interrupt handler in the right order.
2090 *
2091 * If you want to set up a threaded irq handler for your device
2092 * then you need to supply @handler and @thread_fn. @handler is
2093 * still called in hard interrupt context and has to check
2094 * whether the interrupt originates from the device. If yes it
2095 * needs to disable the interrupt on the device and return
2096 * IRQ_WAKE_THREAD which will wake up the handler thread and run
2097 * @thread_fn. This split handler design is necessary to support
2098 * shared interrupts.
2099 *
2100 * Dev_id must be globally unique. Normally the address of the
2101 * device data structure is used as the cookie. Since the handler
2102 * receives this value it makes sense to use it.
2103 *
2104 * If your interrupt is shared you must pass a non NULL dev_id
2105 * as this is required when freeing the interrupt.
2106 *
2107 * Flags:
2108 *
2109 * IRQF_SHARED Interrupt is shared
2110 * IRQF_TRIGGER_* Specify active edge(s) or level
2111 *
2112 */
2113int request_threaded_irq(unsigned int irq, irq_handler_t handler,
2114 irq_handler_t thread_fn, unsigned long irqflags,
2115 const char *devname, void *dev_id)
2116{
2117 struct irqaction *action;
2118 struct irq_desc *desc;
2119 int retval;
2120
2121 if (irq == IRQ_NOTCONNECTED)
2122 return -ENOTCONN;
2123
2124 /*
2125 * Sanity-check: shared interrupts must pass in a real dev-ID,
2126 * otherwise we'll have trouble later trying to figure out
2127 * which interrupt is which (messes up the interrupt freeing
2128 * logic etc).
2129 *
2130 * Also shared interrupts do not go well with disabling auto enable.
2131 * The sharing interrupt might request it while it's still disabled
2132 * and then wait for interrupts forever.
2133 *
2134 * Also IRQF_COND_SUSPEND only makes sense for shared interrupts and
2135 * it cannot be set along with IRQF_NO_SUSPEND.
2136 */
2137 if (((irqflags & IRQF_SHARED) && !dev_id) ||
2138 ((irqflags & IRQF_SHARED) && (irqflags & IRQF_NO_AUTOEN)) ||
2139 (!(irqflags & IRQF_SHARED) && (irqflags & IRQF_COND_SUSPEND)) ||
2140 ((irqflags & IRQF_NO_SUSPEND) && (irqflags & IRQF_COND_SUSPEND)))
2141 return -EINVAL;
2142
2143 desc = irq_to_desc(irq);
2144 if (!desc)
2145 return -EINVAL;
2146
2147 if (!irq_settings_can_request(desc) ||
2148 WARN_ON(irq_settings_is_per_cpu_devid(desc)))
2149 return -EINVAL;
2150
2151 if (!handler) {
2152 if (!thread_fn)
2153 return -EINVAL;
2154 handler = irq_default_primary_handler;
2155 }
2156
2157 action = kzalloc(sizeof(struct irqaction), GFP_KERNEL);
2158 if (!action)
2159 return -ENOMEM;
2160
2161 action->handler = handler;
2162 action->thread_fn = thread_fn;
2163 action->flags = irqflags;
2164 action->name = devname;
2165 action->dev_id = dev_id;
2166
2167 retval = irq_chip_pm_get(&desc->irq_data);
2168 if (retval < 0) {
2169 kfree(action);
2170 return retval;
2171 }
2172
2173 retval = __setup_irq(irq, desc, action);
2174
2175 if (retval) {
2176 irq_chip_pm_put(&desc->irq_data);
2177 kfree(action->secondary);
2178 kfree(action);
2179 }
2180
2181#ifdef CONFIG_DEBUG_SHIRQ_FIXME
2182 if (!retval && (irqflags & IRQF_SHARED)) {
2183 /*
2184 * It's a shared IRQ -- the driver ought to be prepared for it
2185 * to happen immediately, so let's make sure....
2186 * We disable the irq to make sure that a 'real' IRQ doesn't
2187 * run in parallel with our fake.
2188 */
2189 unsigned long flags;
2190
2191 disable_irq(irq);
2192 local_irq_save(flags);
2193
2194 handler(irq, dev_id);
2195
2196 local_irq_restore(flags);
2197 enable_irq(irq);
2198 }
2199#endif
2200 return retval;
2201}
2202EXPORT_SYMBOL(request_threaded_irq);
2203
2204/**
2205 * request_any_context_irq - allocate an interrupt line
2206 * @irq: Interrupt line to allocate
2207 * @handler: Function to be called when the IRQ occurs.
2208 * Threaded handler for threaded interrupts.
2209 * @flags: Interrupt type flags
2210 * @name: An ascii name for the claiming device
2211 * @dev_id: A cookie passed back to the handler function
2212 *
2213 * This call allocates interrupt resources and enables the
2214 * interrupt line and IRQ handling. It selects either a
2215 * hardirq or threaded handling method depending on the
2216 * context.
2217 *
2218 * On failure, it returns a negative value. On success,
2219 * it returns either IRQC_IS_HARDIRQ or IRQC_IS_NESTED.
2220 */
2221int request_any_context_irq(unsigned int irq, irq_handler_t handler,
2222 unsigned long flags, const char *name, void *dev_id)
2223{
2224 struct irq_desc *desc;
2225 int ret;
2226
2227 if (irq == IRQ_NOTCONNECTED)
2228 return -ENOTCONN;
2229
2230 desc = irq_to_desc(irq);
2231 if (!desc)
2232 return -EINVAL;
2233
2234 if (irq_settings_is_nested_thread(desc)) {
2235 ret = request_threaded_irq(irq, NULL, handler,
2236 flags, name, dev_id);
2237 return !ret ? IRQC_IS_NESTED : ret;
2238 }
2239
2240 ret = request_irq(irq, handler, flags, name, dev_id);
2241 return !ret ? IRQC_IS_HARDIRQ : ret;
2242}
2243EXPORT_SYMBOL_GPL(request_any_context_irq);
2244
2245/**
2246 * request_nmi - allocate an interrupt line for NMI delivery
2247 * @irq: Interrupt line to allocate
2248 * @handler: Function to be called when the IRQ occurs.
2249 * Threaded handler for threaded interrupts.
2250 * @irqflags: Interrupt type flags
2251 * @name: An ascii name for the claiming device
2252 * @dev_id: A cookie passed back to the handler function
2253 *
2254 * This call allocates interrupt resources and enables the
2255 * interrupt line and IRQ handling. It sets up the IRQ line
2256 * to be handled as an NMI.
2257 *
2258 * An interrupt line delivering NMIs cannot be shared and IRQ handling
2259 * cannot be threaded.
2260 *
2261 * Interrupt lines requested for NMI delivering must produce per cpu
2262 * interrupts and have auto enabling setting disabled.
2263 *
2264 * Dev_id must be globally unique. Normally the address of the
2265 * device data structure is used as the cookie. Since the handler
2266 * receives this value it makes sense to use it.
2267 *
2268 * If the interrupt line cannot be used to deliver NMIs, function
2269 * will fail and return a negative value.
2270 */
2271int request_nmi(unsigned int irq, irq_handler_t handler,
2272 unsigned long irqflags, const char *name, void *dev_id)
2273{
2274 struct irqaction *action;
2275 struct irq_desc *desc;
2276 unsigned long flags;
2277 int retval;
2278
2279 if (irq == IRQ_NOTCONNECTED)
2280 return -ENOTCONN;
2281
2282 /* NMI cannot be shared, used for Polling */
2283 if (irqflags & (IRQF_SHARED | IRQF_COND_SUSPEND | IRQF_IRQPOLL))
2284 return -EINVAL;
2285
2286 if (!(irqflags & IRQF_PERCPU))
2287 return -EINVAL;
2288
2289 if (!handler)
2290 return -EINVAL;
2291
2292 desc = irq_to_desc(irq);
2293
2294 if (!desc || (irq_settings_can_autoenable(desc) &&
2295 !(irqflags & IRQF_NO_AUTOEN)) ||
2296 !irq_settings_can_request(desc) ||
2297 WARN_ON(irq_settings_is_per_cpu_devid(desc)) ||
2298 !irq_supports_nmi(desc))
2299 return -EINVAL;
2300
2301 action = kzalloc(sizeof(struct irqaction), GFP_KERNEL);
2302 if (!action)
2303 return -ENOMEM;
2304
2305 action->handler = handler;
2306 action->flags = irqflags | IRQF_NO_THREAD | IRQF_NOBALANCING;
2307 action->name = name;
2308 action->dev_id = dev_id;
2309
2310 retval = irq_chip_pm_get(&desc->irq_data);
2311 if (retval < 0)
2312 goto err_out;
2313
2314 retval = __setup_irq(irq, desc, action);
2315 if (retval)
2316 goto err_irq_setup;
2317
2318 raw_spin_lock_irqsave(&desc->lock, flags);
2319
2320 /* Setup NMI state */
2321 desc->istate |= IRQS_NMI;
2322 retval = irq_nmi_setup(desc);
2323 if (retval) {
2324 __cleanup_nmi(irq, desc);
2325 raw_spin_unlock_irqrestore(&desc->lock, flags);
2326 return -EINVAL;
2327 }
2328
2329 raw_spin_unlock_irqrestore(&desc->lock, flags);
2330
2331 return 0;
2332
2333err_irq_setup:
2334 irq_chip_pm_put(&desc->irq_data);
2335err_out:
2336 kfree(action);
2337
2338 return retval;
2339}
2340
2341void enable_percpu_irq(unsigned int irq, unsigned int type)
2342{
2343 unsigned int cpu = smp_processor_id();
2344 unsigned long flags;
2345 struct irq_desc *desc = irq_get_desc_lock(irq, &flags, IRQ_GET_DESC_CHECK_PERCPU);
2346
2347 if (!desc)
2348 return;
2349
2350 /*
2351 * If the trigger type is not specified by the caller, then
2352 * use the default for this interrupt.
2353 */
2354 type &= IRQ_TYPE_SENSE_MASK;
2355 if (type == IRQ_TYPE_NONE)
2356 type = irqd_get_trigger_type(&desc->irq_data);
2357
2358 if (type != IRQ_TYPE_NONE) {
2359 int ret;
2360
2361 ret = __irq_set_trigger(desc, type);
2362
2363 if (ret) {
2364 WARN(1, "failed to set type for IRQ%d\n", irq);
2365 goto out;
2366 }
2367 }
2368
2369 irq_percpu_enable(desc, cpu);
2370out:
2371 irq_put_desc_unlock(desc, flags);
2372}
2373EXPORT_SYMBOL_GPL(enable_percpu_irq);
2374
2375void enable_percpu_nmi(unsigned int irq, unsigned int type)
2376{
2377 enable_percpu_irq(irq, type);
2378}
2379
2380/**
2381 * irq_percpu_is_enabled - Check whether the per cpu irq is enabled
2382 * @irq: Linux irq number to check for
2383 *
2384 * Must be called from a non migratable context. Returns the enable
2385 * state of a per cpu interrupt on the current cpu.
2386 */
2387bool irq_percpu_is_enabled(unsigned int irq)
2388{
2389 unsigned int cpu = smp_processor_id();
2390 struct irq_desc *desc;
2391 unsigned long flags;
2392 bool is_enabled;
2393
2394 desc = irq_get_desc_lock(irq, &flags, IRQ_GET_DESC_CHECK_PERCPU);
2395 if (!desc)
2396 return false;
2397
2398 is_enabled = cpumask_test_cpu(cpu, desc->percpu_enabled);
2399 irq_put_desc_unlock(desc, flags);
2400
2401 return is_enabled;
2402}
2403EXPORT_SYMBOL_GPL(irq_percpu_is_enabled);
2404
2405void disable_percpu_irq(unsigned int irq)
2406{
2407 unsigned int cpu = smp_processor_id();
2408 unsigned long flags;
2409 struct irq_desc *desc = irq_get_desc_lock(irq, &flags, IRQ_GET_DESC_CHECK_PERCPU);
2410
2411 if (!desc)
2412 return;
2413
2414 irq_percpu_disable(desc, cpu);
2415 irq_put_desc_unlock(desc, flags);
2416}
2417EXPORT_SYMBOL_GPL(disable_percpu_irq);
2418
2419void disable_percpu_nmi(unsigned int irq)
2420{
2421 disable_percpu_irq(irq);
2422}
2423
2424/*
2425 * Internal function to unregister a percpu irqaction.
2426 */
2427static struct irqaction *__free_percpu_irq(unsigned int irq, void __percpu *dev_id)
2428{
2429 struct irq_desc *desc = irq_to_desc(irq);
2430 struct irqaction *action;
2431 unsigned long flags;
2432
2433 WARN(in_interrupt(), "Trying to free IRQ %d from IRQ context!\n", irq);
2434
2435 if (!desc)
2436 return NULL;
2437
2438 raw_spin_lock_irqsave(&desc->lock, flags);
2439
2440 action = desc->action;
2441 if (!action || action->percpu_dev_id != dev_id) {
2442 WARN(1, "Trying to free already-free IRQ %d\n", irq);
2443 goto bad;
2444 }
2445
2446 if (!cpumask_empty(desc->percpu_enabled)) {
2447 WARN(1, "percpu IRQ %d still enabled on CPU%d!\n",
2448 irq, cpumask_first(desc->percpu_enabled));
2449 goto bad;
2450 }
2451
2452 /* Found it - now remove it from the list of entries: */
2453 desc->action = NULL;
2454
2455 desc->istate &= ~IRQS_NMI;
2456
2457 raw_spin_unlock_irqrestore(&desc->lock, flags);
2458
2459 unregister_handler_proc(irq, action);
2460
2461 irq_chip_pm_put(&desc->irq_data);
2462 module_put(desc->owner);
2463 return action;
2464
2465bad:
2466 raw_spin_unlock_irqrestore(&desc->lock, flags);
2467 return NULL;
2468}
2469
2470/**
2471 * remove_percpu_irq - free a per-cpu interrupt
2472 * @irq: Interrupt line to free
2473 * @act: irqaction for the interrupt
2474 *
2475 * Used to remove interrupts statically setup by the early boot process.
2476 */
2477void remove_percpu_irq(unsigned int irq, struct irqaction *act)
2478{
2479 struct irq_desc *desc = irq_to_desc(irq);
2480
2481 if (desc && irq_settings_is_per_cpu_devid(desc))
2482 __free_percpu_irq(irq, act->percpu_dev_id);
2483}
2484
2485/**
2486 * free_percpu_irq - free an interrupt allocated with request_percpu_irq
2487 * @irq: Interrupt line to free
2488 * @dev_id: Device identity to free
2489 *
2490 * Remove a percpu interrupt handler. The handler is removed, but
2491 * the interrupt line is not disabled. This must be done on each
2492 * CPU before calling this function. The function does not return
2493 * until any executing interrupts for this IRQ have completed.
2494 *
2495 * This function must not be called from interrupt context.
2496 */
2497void free_percpu_irq(unsigned int irq, void __percpu *dev_id)
2498{
2499 struct irq_desc *desc = irq_to_desc(irq);
2500
2501 if (!desc || !irq_settings_is_per_cpu_devid(desc))
2502 return;
2503
2504 chip_bus_lock(desc);
2505 kfree(__free_percpu_irq(irq, dev_id));
2506 chip_bus_sync_unlock(desc);
2507}
2508EXPORT_SYMBOL_GPL(free_percpu_irq);
2509
2510void free_percpu_nmi(unsigned int irq, void __percpu *dev_id)
2511{
2512 struct irq_desc *desc = irq_to_desc(irq);
2513
2514 if (!desc || !irq_settings_is_per_cpu_devid(desc))
2515 return;
2516
2517 if (WARN_ON(!(desc->istate & IRQS_NMI)))
2518 return;
2519
2520 kfree(__free_percpu_irq(irq, dev_id));
2521}
2522
2523/**
2524 * setup_percpu_irq - setup a per-cpu interrupt
2525 * @irq: Interrupt line to setup
2526 * @act: irqaction for the interrupt
2527 *
2528 * Used to statically setup per-cpu interrupts in the early boot process.
2529 */
2530int setup_percpu_irq(unsigned int irq, struct irqaction *act)
2531{
2532 struct irq_desc *desc = irq_to_desc(irq);
2533 int retval;
2534
2535 if (!desc || !irq_settings_is_per_cpu_devid(desc))
2536 return -EINVAL;
2537
2538 retval = irq_chip_pm_get(&desc->irq_data);
2539 if (retval < 0)
2540 return retval;
2541
2542 retval = __setup_irq(irq, desc, act);
2543
2544 if (retval)
2545 irq_chip_pm_put(&desc->irq_data);
2546
2547 return retval;
2548}
2549
2550/**
2551 * __request_percpu_irq - allocate a percpu interrupt line
2552 * @irq: Interrupt line to allocate
2553 * @handler: Function to be called when the IRQ occurs.
2554 * @flags: Interrupt type flags (IRQF_TIMER only)
2555 * @devname: An ascii name for the claiming device
2556 * @dev_id: A percpu cookie passed back to the handler function
2557 *
2558 * This call allocates interrupt resources and enables the
2559 * interrupt on the local CPU. If the interrupt is supposed to be
2560 * enabled on other CPUs, it has to be done on each CPU using
2561 * enable_percpu_irq().
2562 *
2563 * Dev_id must be globally unique. It is a per-cpu variable, and
2564 * the handler gets called with the interrupted CPU's instance of
2565 * that variable.
2566 */
2567int __request_percpu_irq(unsigned int irq, irq_handler_t handler,
2568 unsigned long flags, const char *devname,
2569 void __percpu *dev_id)
2570{
2571 struct irqaction *action;
2572 struct irq_desc *desc;
2573 int retval;
2574
2575 if (!dev_id)
2576 return -EINVAL;
2577
2578 desc = irq_to_desc(irq);
2579 if (!desc || !irq_settings_can_request(desc) ||
2580 !irq_settings_is_per_cpu_devid(desc))
2581 return -EINVAL;
2582
2583 if (flags && flags != IRQF_TIMER)
2584 return -EINVAL;
2585
2586 action = kzalloc(sizeof(struct irqaction), GFP_KERNEL);
2587 if (!action)
2588 return -ENOMEM;
2589
2590 action->handler = handler;
2591 action->flags = flags | IRQF_PERCPU | IRQF_NO_SUSPEND;
2592 action->name = devname;
2593 action->percpu_dev_id = dev_id;
2594
2595 retval = irq_chip_pm_get(&desc->irq_data);
2596 if (retval < 0) {
2597 kfree(action);
2598 return retval;
2599 }
2600
2601 retval = __setup_irq(irq, desc, action);
2602
2603 if (retval) {
2604 irq_chip_pm_put(&desc->irq_data);
2605 kfree(action);
2606 }
2607
2608 return retval;
2609}
2610EXPORT_SYMBOL_GPL(__request_percpu_irq);
2611
2612/**
2613 * request_percpu_nmi - allocate a percpu interrupt line for NMI delivery
2614 * @irq: Interrupt line to allocate
2615 * @handler: Function to be called when the IRQ occurs.
2616 * @name: An ascii name for the claiming device
2617 * @dev_id: A percpu cookie passed back to the handler function
2618 *
2619 * This call allocates interrupt resources for a per CPU NMI. Per CPU NMIs
2620 * have to be setup on each CPU by calling prepare_percpu_nmi() before
2621 * being enabled on the same CPU by using enable_percpu_nmi().
2622 *
2623 * Dev_id must be globally unique. It is a per-cpu variable, and
2624 * the handler gets called with the interrupted CPU's instance of
2625 * that variable.
2626 *
2627 * Interrupt lines requested for NMI delivering should have auto enabling
2628 * setting disabled.
2629 *
2630 * If the interrupt line cannot be used to deliver NMIs, function
2631 * will fail returning a negative value.
2632 */
2633int request_percpu_nmi(unsigned int irq, irq_handler_t handler,
2634 const char *name, void __percpu *dev_id)
2635{
2636 struct irqaction *action;
2637 struct irq_desc *desc;
2638 unsigned long flags;
2639 int retval;
2640
2641 if (!handler)
2642 return -EINVAL;
2643
2644 desc = irq_to_desc(irq);
2645
2646 if (!desc || !irq_settings_can_request(desc) ||
2647 !irq_settings_is_per_cpu_devid(desc) ||
2648 irq_settings_can_autoenable(desc) ||
2649 !irq_supports_nmi(desc))
2650 return -EINVAL;
2651
2652 /* The line cannot already be NMI */
2653 if (desc->istate & IRQS_NMI)
2654 return -EINVAL;
2655
2656 action = kzalloc(sizeof(struct irqaction), GFP_KERNEL);
2657 if (!action)
2658 return -ENOMEM;
2659
2660 action->handler = handler;
2661 action->flags = IRQF_PERCPU | IRQF_NO_SUSPEND | IRQF_NO_THREAD
2662 | IRQF_NOBALANCING;
2663 action->name = name;
2664 action->percpu_dev_id = dev_id;
2665
2666 retval = irq_chip_pm_get(&desc->irq_data);
2667 if (retval < 0)
2668 goto err_out;
2669
2670 retval = __setup_irq(irq, desc, action);
2671 if (retval)
2672 goto err_irq_setup;
2673
2674 raw_spin_lock_irqsave(&desc->lock, flags);
2675 desc->istate |= IRQS_NMI;
2676 raw_spin_unlock_irqrestore(&desc->lock, flags);
2677
2678 return 0;
2679
2680err_irq_setup:
2681 irq_chip_pm_put(&desc->irq_data);
2682err_out:
2683 kfree(action);
2684
2685 return retval;
2686}
2687
2688/**
2689 * prepare_percpu_nmi - performs CPU local setup for NMI delivery
2690 * @irq: Interrupt line to prepare for NMI delivery
2691 *
2692 * This call prepares an interrupt line to deliver NMI on the current CPU,
2693 * before that interrupt line gets enabled with enable_percpu_nmi().
2694 *
2695 * As a CPU local operation, this should be called from non-preemptible
2696 * context.
2697 *
2698 * If the interrupt line cannot be used to deliver NMIs, function
2699 * will fail returning a negative value.
2700 */
2701int prepare_percpu_nmi(unsigned int irq)
2702{
2703 unsigned long flags;
2704 struct irq_desc *desc;
2705 int ret = 0;
2706
2707 WARN_ON(preemptible());
2708
2709 desc = irq_get_desc_lock(irq, &flags,
2710 IRQ_GET_DESC_CHECK_PERCPU);
2711 if (!desc)
2712 return -EINVAL;
2713
2714 if (WARN(!(desc->istate & IRQS_NMI),
2715 KERN_ERR "prepare_percpu_nmi called for a non-NMI interrupt: irq %u\n",
2716 irq)) {
2717 ret = -EINVAL;
2718 goto out;
2719 }
2720
2721 ret = irq_nmi_setup(desc);
2722 if (ret) {
2723 pr_err("Failed to setup NMI delivery: irq %u\n", irq);
2724 goto out;
2725 }
2726
2727out:
2728 irq_put_desc_unlock(desc, flags);
2729 return ret;
2730}
2731
2732/**
2733 * teardown_percpu_nmi - undoes NMI setup of IRQ line
2734 * @irq: Interrupt line from which CPU local NMI configuration should be
2735 * removed
2736 *
2737 * This call undoes the setup done by prepare_percpu_nmi().
2738 *
2739 * IRQ line should not be enabled for the current CPU.
2740 *
2741 * As a CPU local operation, this should be called from non-preemptible
2742 * context.
2743 */
2744void teardown_percpu_nmi(unsigned int irq)
2745{
2746 unsigned long flags;
2747 struct irq_desc *desc;
2748
2749 WARN_ON(preemptible());
2750
2751 desc = irq_get_desc_lock(irq, &flags,
2752 IRQ_GET_DESC_CHECK_PERCPU);
2753 if (!desc)
2754 return;
2755
2756 if (WARN_ON(!(desc->istate & IRQS_NMI)))
2757 goto out;
2758
2759 irq_nmi_teardown(desc);
2760out:
2761 irq_put_desc_unlock(desc, flags);
2762}
2763
2764int __irq_get_irqchip_state(struct irq_data *data, enum irqchip_irq_state which,
2765 bool *state)
2766{
2767 struct irq_chip *chip;
2768 int err = -EINVAL;
2769
2770 do {
2771 chip = irq_data_get_irq_chip(data);
2772 if (WARN_ON_ONCE(!chip))
2773 return -ENODEV;
2774 if (chip->irq_get_irqchip_state)
2775 break;
2776#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
2777 data = data->parent_data;
2778#else
2779 data = NULL;
2780#endif
2781 } while (data);
2782
2783 if (data)
2784 err = chip->irq_get_irqchip_state(data, which, state);
2785 return err;
2786}
2787
2788/**
2789 * irq_get_irqchip_state - returns the irqchip state of a interrupt.
2790 * @irq: Interrupt line that is forwarded to a VM
2791 * @which: One of IRQCHIP_STATE_* the caller wants to know about
2792 * @state: a pointer to a boolean where the state is to be stored
2793 *
2794 * This call snapshots the internal irqchip state of an
2795 * interrupt, returning into @state the bit corresponding to
2796 * stage @which
2797 *
2798 * This function should be called with preemption disabled if the
2799 * interrupt controller has per-cpu registers.
2800 */
2801int irq_get_irqchip_state(unsigned int irq, enum irqchip_irq_state which,
2802 bool *state)
2803{
2804 struct irq_desc *desc;
2805 struct irq_data *data;
2806 unsigned long flags;
2807 int err = -EINVAL;
2808
2809 desc = irq_get_desc_buslock(irq, &flags, 0);
2810 if (!desc)
2811 return err;
2812
2813 data = irq_desc_get_irq_data(desc);
2814
2815 err = __irq_get_irqchip_state(data, which, state);
2816
2817 irq_put_desc_busunlock(desc, flags);
2818 return err;
2819}
2820EXPORT_SYMBOL_GPL(irq_get_irqchip_state);
2821
2822/**
2823 * irq_set_irqchip_state - set the state of a forwarded interrupt.
2824 * @irq: Interrupt line that is forwarded to a VM
2825 * @which: State to be restored (one of IRQCHIP_STATE_*)
2826 * @val: Value corresponding to @which
2827 *
2828 * This call sets the internal irqchip state of an interrupt,
2829 * depending on the value of @which.
2830 *
2831 * This function should be called with preemption disabled if the
2832 * interrupt controller has per-cpu registers.
2833 */
2834int irq_set_irqchip_state(unsigned int irq, enum irqchip_irq_state which,
2835 bool val)
2836{
2837 struct irq_desc *desc;
2838 struct irq_data *data;
2839 struct irq_chip *chip;
2840 unsigned long flags;
2841 int err = -EINVAL;
2842
2843 desc = irq_get_desc_buslock(irq, &flags, 0);
2844 if (!desc)
2845 return err;
2846
2847 data = irq_desc_get_irq_data(desc);
2848
2849 do {
2850 chip = irq_data_get_irq_chip(data);
2851 if (WARN_ON_ONCE(!chip)) {
2852 err = -ENODEV;
2853 goto out_unlock;
2854 }
2855 if (chip->irq_set_irqchip_state)
2856 break;
2857#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
2858 data = data->parent_data;
2859#else
2860 data = NULL;
2861#endif
2862 } while (data);
2863
2864 if (data)
2865 err = chip->irq_set_irqchip_state(data, which, val);
2866
2867out_unlock:
2868 irq_put_desc_busunlock(desc, flags);
2869 return err;
2870}
2871EXPORT_SYMBOL_GPL(irq_set_irqchip_state);
2872
2873/**
2874 * irq_has_action - Check whether an interrupt is requested
2875 * @irq: The linux irq number
2876 *
2877 * Returns: A snapshot of the current state
2878 */
2879bool irq_has_action(unsigned int irq)
2880{
2881 bool res;
2882
2883 rcu_read_lock();
2884 res = irq_desc_has_action(irq_to_desc(irq));
2885 rcu_read_unlock();
2886 return res;
2887}
2888EXPORT_SYMBOL_GPL(irq_has_action);
2889
2890/**
2891 * irq_check_status_bit - Check whether bits in the irq descriptor status are set
2892 * @irq: The linux irq number
2893 * @bitmask: The bitmask to evaluate
2894 *
2895 * Returns: True if one of the bits in @bitmask is set
2896 */
2897bool irq_check_status_bit(unsigned int irq, unsigned int bitmask)
2898{
2899 struct irq_desc *desc;
2900 bool res = false;
2901
2902 rcu_read_lock();
2903 desc = irq_to_desc(irq);
2904 if (desc)
2905 res = !!(desc->status_use_accessors & bitmask);
2906 rcu_read_unlock();
2907 return res;
2908}
2909EXPORT_SYMBOL_GPL(irq_check_status_bit);