Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2#include <linux/clockchips.h>
3#include <linux/interrupt.h>
4#include <linux/export.h>
5#include <linux/delay.h>
6#include <linux/hpet.h>
7#include <linux/cpu.h>
8#include <linux/irq.h>
9
10#include <asm/hpet.h>
11#include <asm/time.h>
12
13#undef pr_fmt
14#define pr_fmt(fmt) "hpet: " fmt
15
16enum hpet_mode {
17 HPET_MODE_UNUSED,
18 HPET_MODE_LEGACY,
19 HPET_MODE_CLOCKEVT,
20 HPET_MODE_DEVICE,
21};
22
23struct hpet_channel {
24 struct clock_event_device evt;
25 unsigned int num;
26 unsigned int cpu;
27 unsigned int irq;
28 unsigned int in_use;
29 enum hpet_mode mode;
30 unsigned int boot_cfg;
31 char name[10];
32};
33
34struct hpet_base {
35 unsigned int nr_channels;
36 unsigned int nr_clockevents;
37 unsigned int boot_cfg;
38 struct hpet_channel *channels;
39};
40
41#define HPET_MASK CLOCKSOURCE_MASK(32)
42
43#define HPET_MIN_CYCLES 128
44#define HPET_MIN_PROG_DELTA (HPET_MIN_CYCLES + (HPET_MIN_CYCLES >> 1))
45
46/*
47 * HPET address is set in acpi/boot.c, when an ACPI entry exists
48 */
49unsigned long hpet_address;
50u8 hpet_blockid; /* OS timer block num */
51bool hpet_msi_disable;
52
53#ifdef CONFIG_PCI_MSI
54static DEFINE_PER_CPU(struct hpet_channel *, cpu_hpet_channel);
55static struct irq_domain *hpet_domain;
56#endif
57
58static void __iomem *hpet_virt_address;
59
60static struct hpet_base hpet_base;
61
62static bool hpet_legacy_int_enabled;
63static unsigned long hpet_freq;
64
65bool boot_hpet_disable;
66bool hpet_force_user;
67static bool hpet_verbose;
68
69static inline
70struct hpet_channel *clockevent_to_channel(struct clock_event_device *evt)
71{
72 return container_of(evt, struct hpet_channel, evt);
73}
74
75inline unsigned int hpet_readl(unsigned int a)
76{
77 return readl(hpet_virt_address + a);
78}
79
80static inline void hpet_writel(unsigned int d, unsigned int a)
81{
82 writel(d, hpet_virt_address + a);
83}
84
85static inline void hpet_set_mapping(void)
86{
87 hpet_virt_address = ioremap_nocache(hpet_address, HPET_MMAP_SIZE);
88}
89
90static inline void hpet_clear_mapping(void)
91{
92 iounmap(hpet_virt_address);
93 hpet_virt_address = NULL;
94}
95
96/*
97 * HPET command line enable / disable
98 */
99static int __init hpet_setup(char *str)
100{
101 while (str) {
102 char *next = strchr(str, ',');
103
104 if (next)
105 *next++ = 0;
106 if (!strncmp("disable", str, 7))
107 boot_hpet_disable = true;
108 if (!strncmp("force", str, 5))
109 hpet_force_user = true;
110 if (!strncmp("verbose", str, 7))
111 hpet_verbose = true;
112 str = next;
113 }
114 return 1;
115}
116__setup("hpet=", hpet_setup);
117
118static int __init disable_hpet(char *str)
119{
120 boot_hpet_disable = true;
121 return 1;
122}
123__setup("nohpet", disable_hpet);
124
125static inline int is_hpet_capable(void)
126{
127 return !boot_hpet_disable && hpet_address;
128}
129
130/**
131 * is_hpet_enabled - Check whether the legacy HPET timer interrupt is enabled
132 */
133int is_hpet_enabled(void)
134{
135 return is_hpet_capable() && hpet_legacy_int_enabled;
136}
137EXPORT_SYMBOL_GPL(is_hpet_enabled);
138
139static void _hpet_print_config(const char *function, int line)
140{
141 u32 i, id, period, cfg, status, channels, l, h;
142
143 pr_info("%s(%d):\n", function, line);
144
145 id = hpet_readl(HPET_ID);
146 period = hpet_readl(HPET_PERIOD);
147 pr_info("ID: 0x%x, PERIOD: 0x%x\n", id, period);
148
149 cfg = hpet_readl(HPET_CFG);
150 status = hpet_readl(HPET_STATUS);
151 pr_info("CFG: 0x%x, STATUS: 0x%x\n", cfg, status);
152
153 l = hpet_readl(HPET_COUNTER);
154 h = hpet_readl(HPET_COUNTER+4);
155 pr_info("COUNTER_l: 0x%x, COUNTER_h: 0x%x\n", l, h);
156
157 channels = ((id & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT) + 1;
158
159 for (i = 0; i < channels; i++) {
160 l = hpet_readl(HPET_Tn_CFG(i));
161 h = hpet_readl(HPET_Tn_CFG(i)+4);
162 pr_info("T%d: CFG_l: 0x%x, CFG_h: 0x%x\n", i, l, h);
163
164 l = hpet_readl(HPET_Tn_CMP(i));
165 h = hpet_readl(HPET_Tn_CMP(i)+4);
166 pr_info("T%d: CMP_l: 0x%x, CMP_h: 0x%x\n", i, l, h);
167
168 l = hpet_readl(HPET_Tn_ROUTE(i));
169 h = hpet_readl(HPET_Tn_ROUTE(i)+4);
170 pr_info("T%d ROUTE_l: 0x%x, ROUTE_h: 0x%x\n", i, l, h);
171 }
172}
173
174#define hpet_print_config() \
175do { \
176 if (hpet_verbose) \
177 _hpet_print_config(__func__, __LINE__); \
178} while (0)
179
180/*
181 * When the HPET driver (/dev/hpet) is enabled, we need to reserve
182 * timer 0 and timer 1 in case of RTC emulation.
183 */
184#ifdef CONFIG_HPET
185
186static void __init hpet_reserve_platform_timers(void)
187{
188 struct hpet_data hd;
189 unsigned int i;
190
191 memset(&hd, 0, sizeof(hd));
192 hd.hd_phys_address = hpet_address;
193 hd.hd_address = hpet_virt_address;
194 hd.hd_nirqs = hpet_base.nr_channels;
195
196 /*
197 * NOTE that hd_irq[] reflects IOAPIC input pins (LEGACY_8254
198 * is wrong for i8259!) not the output IRQ. Many BIOS writers
199 * don't bother configuring *any* comparator interrupts.
200 */
201 hd.hd_irq[0] = HPET_LEGACY_8254;
202 hd.hd_irq[1] = HPET_LEGACY_RTC;
203
204 for (i = 0; i < hpet_base.nr_channels; i++) {
205 struct hpet_channel *hc = hpet_base.channels + i;
206
207 if (i >= 2)
208 hd.hd_irq[i] = hc->irq;
209
210 switch (hc->mode) {
211 case HPET_MODE_UNUSED:
212 case HPET_MODE_DEVICE:
213 hc->mode = HPET_MODE_DEVICE;
214 break;
215 case HPET_MODE_CLOCKEVT:
216 case HPET_MODE_LEGACY:
217 hpet_reserve_timer(&hd, hc->num);
218 break;
219 }
220 }
221
222 hpet_alloc(&hd);
223}
224
225static void __init hpet_select_device_channel(void)
226{
227 int i;
228
229 for (i = 0; i < hpet_base.nr_channels; i++) {
230 struct hpet_channel *hc = hpet_base.channels + i;
231
232 /* Associate the first unused channel to /dev/hpet */
233 if (hc->mode == HPET_MODE_UNUSED) {
234 hc->mode = HPET_MODE_DEVICE;
235 return;
236 }
237 }
238}
239
240#else
241static inline void hpet_reserve_platform_timers(void) { }
242static inline void hpet_select_device_channel(void) {}
243#endif
244
245/* Common HPET functions */
246static void hpet_stop_counter(void)
247{
248 u32 cfg = hpet_readl(HPET_CFG);
249
250 cfg &= ~HPET_CFG_ENABLE;
251 hpet_writel(cfg, HPET_CFG);
252}
253
254static void hpet_reset_counter(void)
255{
256 hpet_writel(0, HPET_COUNTER);
257 hpet_writel(0, HPET_COUNTER + 4);
258}
259
260static void hpet_start_counter(void)
261{
262 unsigned int cfg = hpet_readl(HPET_CFG);
263
264 cfg |= HPET_CFG_ENABLE;
265 hpet_writel(cfg, HPET_CFG);
266}
267
268static void hpet_restart_counter(void)
269{
270 hpet_stop_counter();
271 hpet_reset_counter();
272 hpet_start_counter();
273}
274
275static void hpet_resume_device(void)
276{
277 force_hpet_resume();
278}
279
280static void hpet_resume_counter(struct clocksource *cs)
281{
282 hpet_resume_device();
283 hpet_restart_counter();
284}
285
286static void hpet_enable_legacy_int(void)
287{
288 unsigned int cfg = hpet_readl(HPET_CFG);
289
290 cfg |= HPET_CFG_LEGACY;
291 hpet_writel(cfg, HPET_CFG);
292 hpet_legacy_int_enabled = true;
293}
294
295static int hpet_clkevt_set_state_periodic(struct clock_event_device *evt)
296{
297 unsigned int channel = clockevent_to_channel(evt)->num;
298 unsigned int cfg, cmp, now;
299 uint64_t delta;
300
301 hpet_stop_counter();
302 delta = ((uint64_t)(NSEC_PER_SEC / HZ)) * evt->mult;
303 delta >>= evt->shift;
304 now = hpet_readl(HPET_COUNTER);
305 cmp = now + (unsigned int)delta;
306 cfg = hpet_readl(HPET_Tn_CFG(channel));
307 cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC | HPET_TN_SETVAL |
308 HPET_TN_32BIT;
309 hpet_writel(cfg, HPET_Tn_CFG(channel));
310 hpet_writel(cmp, HPET_Tn_CMP(channel));
311 udelay(1);
312 /*
313 * HPET on AMD 81xx needs a second write (with HPET_TN_SETVAL
314 * cleared) to T0_CMP to set the period. The HPET_TN_SETVAL
315 * bit is automatically cleared after the first write.
316 * (See AMD-8111 HyperTransport I/O Hub Data Sheet,
317 * Publication # 24674)
318 */
319 hpet_writel((unsigned int)delta, HPET_Tn_CMP(channel));
320 hpet_start_counter();
321 hpet_print_config();
322
323 return 0;
324}
325
326static int hpet_clkevt_set_state_oneshot(struct clock_event_device *evt)
327{
328 unsigned int channel = clockevent_to_channel(evt)->num;
329 unsigned int cfg;
330
331 cfg = hpet_readl(HPET_Tn_CFG(channel));
332 cfg &= ~HPET_TN_PERIODIC;
333 cfg |= HPET_TN_ENABLE | HPET_TN_32BIT;
334 hpet_writel(cfg, HPET_Tn_CFG(channel));
335
336 return 0;
337}
338
339static int hpet_clkevt_set_state_shutdown(struct clock_event_device *evt)
340{
341 unsigned int channel = clockevent_to_channel(evt)->num;
342 unsigned int cfg;
343
344 cfg = hpet_readl(HPET_Tn_CFG(channel));
345 cfg &= ~HPET_TN_ENABLE;
346 hpet_writel(cfg, HPET_Tn_CFG(channel));
347
348 return 0;
349}
350
351static int hpet_clkevt_legacy_resume(struct clock_event_device *evt)
352{
353 hpet_enable_legacy_int();
354 hpet_print_config();
355 return 0;
356}
357
358static int
359hpet_clkevt_set_next_event(unsigned long delta, struct clock_event_device *evt)
360{
361 unsigned int channel = clockevent_to_channel(evt)->num;
362 u32 cnt;
363 s32 res;
364
365 cnt = hpet_readl(HPET_COUNTER);
366 cnt += (u32) delta;
367 hpet_writel(cnt, HPET_Tn_CMP(channel));
368
369 /*
370 * HPETs are a complete disaster. The compare register is
371 * based on a equal comparison and neither provides a less
372 * than or equal functionality (which would require to take
373 * the wraparound into account) nor a simple count down event
374 * mode. Further the write to the comparator register is
375 * delayed internally up to two HPET clock cycles in certain
376 * chipsets (ATI, ICH9,10). Some newer AMD chipsets have even
377 * longer delays. We worked around that by reading back the
378 * compare register, but that required another workaround for
379 * ICH9,10 chips where the first readout after write can
380 * return the old stale value. We already had a minimum
381 * programming delta of 5us enforced, but a NMI or SMI hitting
382 * between the counter readout and the comparator write can
383 * move us behind that point easily. Now instead of reading
384 * the compare register back several times, we make the ETIME
385 * decision based on the following: Return ETIME if the
386 * counter value after the write is less than HPET_MIN_CYCLES
387 * away from the event or if the counter is already ahead of
388 * the event. The minimum programming delta for the generic
389 * clockevents code is set to 1.5 * HPET_MIN_CYCLES.
390 */
391 res = (s32)(cnt - hpet_readl(HPET_COUNTER));
392
393 return res < HPET_MIN_CYCLES ? -ETIME : 0;
394}
395
396static void hpet_init_clockevent(struct hpet_channel *hc, unsigned int rating)
397{
398 struct clock_event_device *evt = &hc->evt;
399
400 evt->rating = rating;
401 evt->irq = hc->irq;
402 evt->name = hc->name;
403 evt->cpumask = cpumask_of(hc->cpu);
404 evt->set_state_oneshot = hpet_clkevt_set_state_oneshot;
405 evt->set_next_event = hpet_clkevt_set_next_event;
406 evt->set_state_shutdown = hpet_clkevt_set_state_shutdown;
407
408 evt->features = CLOCK_EVT_FEAT_ONESHOT;
409 if (hc->boot_cfg & HPET_TN_PERIODIC) {
410 evt->features |= CLOCK_EVT_FEAT_PERIODIC;
411 evt->set_state_periodic = hpet_clkevt_set_state_periodic;
412 }
413}
414
415static void __init hpet_legacy_clockevent_register(struct hpet_channel *hc)
416{
417 /*
418 * Start HPET with the boot CPU's cpumask and make it global after
419 * the IO_APIC has been initialized.
420 */
421 hc->cpu = boot_cpu_data.cpu_index;
422 strncpy(hc->name, "hpet", sizeof(hc->name));
423 hpet_init_clockevent(hc, 50);
424
425 hc->evt.tick_resume = hpet_clkevt_legacy_resume;
426
427 /*
428 * Legacy horrors and sins from the past. HPET used periodic mode
429 * unconditionally forever on the legacy channel 0. Removing the
430 * below hack and using the conditional in hpet_init_clockevent()
431 * makes at least Qemu and one hardware machine fail to boot.
432 * There are two issues which cause the boot failure:
433 *
434 * #1 After the timer delivery test in IOAPIC and the IOAPIC setup
435 * the next interrupt is not delivered despite the HPET channel
436 * being programmed correctly. Reprogramming the HPET after
437 * switching to IOAPIC makes it work again. After fixing this,
438 * the next issue surfaces:
439 *
440 * #2 Due to the unconditional periodic mode availability the Local
441 * APIC timer calibration can hijack the global clockevents
442 * event handler without causing damage. Using oneshot at this
443 * stage makes if hang because the HPET does not get
444 * reprogrammed due to the handler hijacking. Duh, stupid me!
445 *
446 * Both issues require major surgery and especially the kick HPET
447 * again after enabling IOAPIC results in really nasty hackery.
448 * This 'assume periodic works' magic has survived since HPET
449 * support got added, so it's questionable whether this should be
450 * fixed. Both Qemu and the failing hardware machine support
451 * periodic mode despite the fact that both don't advertise it in
452 * the configuration register and both need that extra kick after
453 * switching to IOAPIC. Seems to be a feature...
454 */
455 hc->evt.features |= CLOCK_EVT_FEAT_PERIODIC;
456 hc->evt.set_state_periodic = hpet_clkevt_set_state_periodic;
457
458 /* Start HPET legacy interrupts */
459 hpet_enable_legacy_int();
460
461 clockevents_config_and_register(&hc->evt, hpet_freq,
462 HPET_MIN_PROG_DELTA, 0x7FFFFFFF);
463 global_clock_event = &hc->evt;
464 pr_debug("Clockevent registered\n");
465}
466
467/*
468 * HPET MSI Support
469 */
470#ifdef CONFIG_PCI_MSI
471
472void hpet_msi_unmask(struct irq_data *data)
473{
474 struct hpet_channel *hc = irq_data_get_irq_handler_data(data);
475 unsigned int cfg;
476
477 cfg = hpet_readl(HPET_Tn_CFG(hc->num));
478 cfg |= HPET_TN_ENABLE | HPET_TN_FSB;
479 hpet_writel(cfg, HPET_Tn_CFG(hc->num));
480}
481
482void hpet_msi_mask(struct irq_data *data)
483{
484 struct hpet_channel *hc = irq_data_get_irq_handler_data(data);
485 unsigned int cfg;
486
487 cfg = hpet_readl(HPET_Tn_CFG(hc->num));
488 cfg &= ~(HPET_TN_ENABLE | HPET_TN_FSB);
489 hpet_writel(cfg, HPET_Tn_CFG(hc->num));
490}
491
492void hpet_msi_write(struct hpet_channel *hc, struct msi_msg *msg)
493{
494 hpet_writel(msg->data, HPET_Tn_ROUTE(hc->num));
495 hpet_writel(msg->address_lo, HPET_Tn_ROUTE(hc->num) + 4);
496}
497
498static int hpet_clkevt_msi_resume(struct clock_event_device *evt)
499{
500 struct hpet_channel *hc = clockevent_to_channel(evt);
501 struct irq_data *data = irq_get_irq_data(hc->irq);
502 struct msi_msg msg;
503
504 /* Restore the MSI msg and unmask the interrupt */
505 irq_chip_compose_msi_msg(data, &msg);
506 hpet_msi_write(hc, &msg);
507 hpet_msi_unmask(data);
508 return 0;
509}
510
511static irqreturn_t hpet_msi_interrupt_handler(int irq, void *data)
512{
513 struct hpet_channel *hc = data;
514 struct clock_event_device *evt = &hc->evt;
515
516 if (!evt->event_handler) {
517 pr_info("Spurious interrupt HPET channel %d\n", hc->num);
518 return IRQ_HANDLED;
519 }
520
521 evt->event_handler(evt);
522 return IRQ_HANDLED;
523}
524
525static int hpet_setup_msi_irq(struct hpet_channel *hc)
526{
527 if (request_irq(hc->irq, hpet_msi_interrupt_handler,
528 IRQF_TIMER | IRQF_NOBALANCING,
529 hc->name, hc))
530 return -1;
531
532 disable_irq(hc->irq);
533 irq_set_affinity(hc->irq, cpumask_of(hc->cpu));
534 enable_irq(hc->irq);
535
536 pr_debug("%s irq %u for MSI\n", hc->name, hc->irq);
537
538 return 0;
539}
540
541/* Invoked from the hotplug callback on @cpu */
542static void init_one_hpet_msi_clockevent(struct hpet_channel *hc, int cpu)
543{
544 struct clock_event_device *evt = &hc->evt;
545
546 hc->cpu = cpu;
547 per_cpu(cpu_hpet_channel, cpu) = hc;
548 hpet_setup_msi_irq(hc);
549
550 hpet_init_clockevent(hc, 110);
551 evt->tick_resume = hpet_clkevt_msi_resume;
552
553 clockevents_config_and_register(evt, hpet_freq, HPET_MIN_PROG_DELTA,
554 0x7FFFFFFF);
555}
556
557static struct hpet_channel *hpet_get_unused_clockevent(void)
558{
559 int i;
560
561 for (i = 0; i < hpet_base.nr_channels; i++) {
562 struct hpet_channel *hc = hpet_base.channels + i;
563
564 if (hc->mode != HPET_MODE_CLOCKEVT || hc->in_use)
565 continue;
566 hc->in_use = 1;
567 return hc;
568 }
569 return NULL;
570}
571
572static int hpet_cpuhp_online(unsigned int cpu)
573{
574 struct hpet_channel *hc = hpet_get_unused_clockevent();
575
576 if (hc)
577 init_one_hpet_msi_clockevent(hc, cpu);
578 return 0;
579}
580
581static int hpet_cpuhp_dead(unsigned int cpu)
582{
583 struct hpet_channel *hc = per_cpu(cpu_hpet_channel, cpu);
584
585 if (!hc)
586 return 0;
587 free_irq(hc->irq, hc);
588 hc->in_use = 0;
589 per_cpu(cpu_hpet_channel, cpu) = NULL;
590 return 0;
591}
592
593static void __init hpet_select_clockevents(void)
594{
595 unsigned int i;
596
597 hpet_base.nr_clockevents = 0;
598
599 /* No point if MSI is disabled or CPU has an Always Runing APIC Timer */
600 if (hpet_msi_disable || boot_cpu_has(X86_FEATURE_ARAT))
601 return;
602
603 hpet_print_config();
604
605 hpet_domain = hpet_create_irq_domain(hpet_blockid);
606 if (!hpet_domain)
607 return;
608
609 for (i = 0; i < hpet_base.nr_channels; i++) {
610 struct hpet_channel *hc = hpet_base.channels + i;
611 int irq;
612
613 if (hc->mode != HPET_MODE_UNUSED)
614 continue;
615
616 /* Only consider HPET channel with MSI support */
617 if (!(hc->boot_cfg & HPET_TN_FSB_CAP))
618 continue;
619
620 sprintf(hc->name, "hpet%d", i);
621
622 irq = hpet_assign_irq(hpet_domain, hc, hc->num);
623 if (irq <= 0)
624 continue;
625
626 hc->irq = irq;
627 hc->mode = HPET_MODE_CLOCKEVT;
628
629 if (++hpet_base.nr_clockevents == num_possible_cpus())
630 break;
631 }
632
633 pr_info("%d channels of %d reserved for per-cpu timers\n",
634 hpet_base.nr_channels, hpet_base.nr_clockevents);
635}
636
637#else
638
639static inline void hpet_select_clockevents(void) { }
640
641#define hpet_cpuhp_online NULL
642#define hpet_cpuhp_dead NULL
643
644#endif
645
646/*
647 * Clock source related code
648 */
649#if defined(CONFIG_SMP) && defined(CONFIG_64BIT)
650/*
651 * Reading the HPET counter is a very slow operation. If a large number of
652 * CPUs are trying to access the HPET counter simultaneously, it can cause
653 * massive delays and slow down system performance dramatically. This may
654 * happen when HPET is the default clock source instead of TSC. For a
655 * really large system with hundreds of CPUs, the slowdown may be so
656 * severe, that it can actually crash the system because of a NMI watchdog
657 * soft lockup, for example.
658 *
659 * If multiple CPUs are trying to access the HPET counter at the same time,
660 * we don't actually need to read the counter multiple times. Instead, the
661 * other CPUs can use the counter value read by the first CPU in the group.
662 *
663 * This special feature is only enabled on x86-64 systems. It is unlikely
664 * that 32-bit x86 systems will have enough CPUs to require this feature
665 * with its associated locking overhead. We also need 64-bit atomic read.
666 *
667 * The lock and the HPET value are stored together and can be read in a
668 * single atomic 64-bit read. It is explicitly assumed that arch_spinlock_t
669 * is 32 bits in size.
670 */
671union hpet_lock {
672 struct {
673 arch_spinlock_t lock;
674 u32 value;
675 };
676 u64 lockval;
677};
678
679static union hpet_lock hpet __cacheline_aligned = {
680 { .lock = __ARCH_SPIN_LOCK_UNLOCKED, },
681};
682
683static u64 read_hpet(struct clocksource *cs)
684{
685 unsigned long flags;
686 union hpet_lock old, new;
687
688 BUILD_BUG_ON(sizeof(union hpet_lock) != 8);
689
690 /*
691 * Read HPET directly if in NMI.
692 */
693 if (in_nmi())
694 return (u64)hpet_readl(HPET_COUNTER);
695
696 /*
697 * Read the current state of the lock and HPET value atomically.
698 */
699 old.lockval = READ_ONCE(hpet.lockval);
700
701 if (arch_spin_is_locked(&old.lock))
702 goto contended;
703
704 local_irq_save(flags);
705 if (arch_spin_trylock(&hpet.lock)) {
706 new.value = hpet_readl(HPET_COUNTER);
707 /*
708 * Use WRITE_ONCE() to prevent store tearing.
709 */
710 WRITE_ONCE(hpet.value, new.value);
711 arch_spin_unlock(&hpet.lock);
712 local_irq_restore(flags);
713 return (u64)new.value;
714 }
715 local_irq_restore(flags);
716
717contended:
718 /*
719 * Contended case
720 * --------------
721 * Wait until the HPET value change or the lock is free to indicate
722 * its value is up-to-date.
723 *
724 * It is possible that old.value has already contained the latest
725 * HPET value while the lock holder was in the process of releasing
726 * the lock. Checking for lock state change will enable us to return
727 * the value immediately instead of waiting for the next HPET reader
728 * to come along.
729 */
730 do {
731 cpu_relax();
732 new.lockval = READ_ONCE(hpet.lockval);
733 } while ((new.value == old.value) && arch_spin_is_locked(&new.lock));
734
735 return (u64)new.value;
736}
737#else
738/*
739 * For UP or 32-bit.
740 */
741static u64 read_hpet(struct clocksource *cs)
742{
743 return (u64)hpet_readl(HPET_COUNTER);
744}
745#endif
746
747static struct clocksource clocksource_hpet = {
748 .name = "hpet",
749 .rating = 250,
750 .read = read_hpet,
751 .mask = HPET_MASK,
752 .flags = CLOCK_SOURCE_IS_CONTINUOUS,
753 .resume = hpet_resume_counter,
754};
755
756/*
757 * AMD SB700 based systems with spread spectrum enabled use a SMM based
758 * HPET emulation to provide proper frequency setting.
759 *
760 * On such systems the SMM code is initialized with the first HPET register
761 * access and takes some time to complete. During this time the config
762 * register reads 0xffffffff. We check for max 1000 loops whether the
763 * config register reads a non-0xffffffff value to make sure that the
764 * HPET is up and running before we proceed any further.
765 *
766 * A counting loop is safe, as the HPET access takes thousands of CPU cycles.
767 *
768 * On non-SB700 based machines this check is only done once and has no
769 * side effects.
770 */
771static bool __init hpet_cfg_working(void)
772{
773 int i;
774
775 for (i = 0; i < 1000; i++) {
776 if (hpet_readl(HPET_CFG) != 0xFFFFFFFF)
777 return true;
778 }
779
780 pr_warn("Config register invalid. Disabling HPET\n");
781 return false;
782}
783
784static bool __init hpet_counting(void)
785{
786 u64 start, now, t1;
787
788 hpet_restart_counter();
789
790 t1 = hpet_readl(HPET_COUNTER);
791 start = rdtsc();
792
793 /*
794 * We don't know the TSC frequency yet, but waiting for
795 * 200000 TSC cycles is safe:
796 * 4 GHz == 50us
797 * 1 GHz == 200us
798 */
799 do {
800 if (t1 != hpet_readl(HPET_COUNTER))
801 return true;
802 now = rdtsc();
803 } while ((now - start) < 200000UL);
804
805 pr_warn("Counter not counting. HPET disabled\n");
806 return false;
807}
808
809/**
810 * hpet_enable - Try to setup the HPET timer. Returns 1 on success.
811 */
812int __init hpet_enable(void)
813{
814 u32 hpet_period, cfg, id, irq;
815 unsigned int i, channels;
816 struct hpet_channel *hc;
817 u64 freq;
818
819 if (!is_hpet_capable())
820 return 0;
821
822 hpet_set_mapping();
823 if (!hpet_virt_address)
824 return 0;
825
826 /* Validate that the config register is working */
827 if (!hpet_cfg_working())
828 goto out_nohpet;
829
830 /*
831 * Read the period and check for a sane value:
832 */
833 hpet_period = hpet_readl(HPET_PERIOD);
834 if (hpet_period < HPET_MIN_PERIOD || hpet_period > HPET_MAX_PERIOD)
835 goto out_nohpet;
836
837 /* The period is a femtoseconds value. Convert it to a frequency. */
838 freq = FSEC_PER_SEC;
839 do_div(freq, hpet_period);
840 hpet_freq = freq;
841
842 /*
843 * Read the HPET ID register to retrieve the IRQ routing
844 * information and the number of channels
845 */
846 id = hpet_readl(HPET_ID);
847 hpet_print_config();
848
849 /* This is the HPET channel number which is zero based */
850 channels = ((id & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT) + 1;
851
852 /*
853 * The legacy routing mode needs at least two channels, tick timer
854 * and the rtc emulation channel.
855 */
856 if (IS_ENABLED(CONFIG_HPET_EMULATE_RTC) && channels < 2)
857 goto out_nohpet;
858
859 hc = kcalloc(channels, sizeof(*hc), GFP_KERNEL);
860 if (!hc) {
861 pr_warn("Disabling HPET.\n");
862 goto out_nohpet;
863 }
864 hpet_base.channels = hc;
865 hpet_base.nr_channels = channels;
866
867 /* Read, store and sanitize the global configuration */
868 cfg = hpet_readl(HPET_CFG);
869 hpet_base.boot_cfg = cfg;
870 cfg &= ~(HPET_CFG_ENABLE | HPET_CFG_LEGACY);
871 hpet_writel(cfg, HPET_CFG);
872 if (cfg)
873 pr_warn("Global config: Unknown bits %#x\n", cfg);
874
875 /* Read, store and sanitize the per channel configuration */
876 for (i = 0; i < channels; i++, hc++) {
877 hc->num = i;
878
879 cfg = hpet_readl(HPET_Tn_CFG(i));
880 hc->boot_cfg = cfg;
881 irq = (cfg & Tn_INT_ROUTE_CNF_MASK) >> Tn_INT_ROUTE_CNF_SHIFT;
882 hc->irq = irq;
883
884 cfg &= ~(HPET_TN_ENABLE | HPET_TN_LEVEL | HPET_TN_FSB);
885 hpet_writel(cfg, HPET_Tn_CFG(i));
886
887 cfg &= ~(HPET_TN_PERIODIC | HPET_TN_PERIODIC_CAP
888 | HPET_TN_64BIT_CAP | HPET_TN_32BIT | HPET_TN_ROUTE
889 | HPET_TN_FSB | HPET_TN_FSB_CAP);
890 if (cfg)
891 pr_warn("Channel #%u config: Unknown bits %#x\n", i, cfg);
892 }
893 hpet_print_config();
894
895 /*
896 * Validate that the counter is counting. This needs to be done
897 * after sanitizing the config registers to properly deal with
898 * force enabled HPETs.
899 */
900 if (!hpet_counting())
901 goto out_nohpet;
902
903 clocksource_register_hz(&clocksource_hpet, (u32)hpet_freq);
904
905 if (id & HPET_ID_LEGSUP) {
906 hpet_legacy_clockevent_register(&hpet_base.channels[0]);
907 hpet_base.channels[0].mode = HPET_MODE_LEGACY;
908 if (IS_ENABLED(CONFIG_HPET_EMULATE_RTC))
909 hpet_base.channels[1].mode = HPET_MODE_LEGACY;
910 return 1;
911 }
912 return 0;
913
914out_nohpet:
915 kfree(hpet_base.channels);
916 hpet_base.channels = NULL;
917 hpet_base.nr_channels = 0;
918 hpet_clear_mapping();
919 hpet_address = 0;
920 return 0;
921}
922
923/*
924 * The late initialization runs after the PCI quirks have been invoked
925 * which might have detected a system on which the HPET can be enforced.
926 *
927 * Also, the MSI machinery is not working yet when the HPET is initialized
928 * early.
929 *
930 * If the HPET is enabled, then:
931 *
932 * 1) Reserve one channel for /dev/hpet if CONFIG_HPET=y
933 * 2) Reserve up to num_possible_cpus() channels as per CPU clockevents
934 * 3) Setup /dev/hpet if CONFIG_HPET=y
935 * 4) Register hotplug callbacks when clockevents are available
936 */
937static __init int hpet_late_init(void)
938{
939 int ret;
940
941 if (!hpet_address) {
942 if (!force_hpet_address)
943 return -ENODEV;
944
945 hpet_address = force_hpet_address;
946 hpet_enable();
947 }
948
949 if (!hpet_virt_address)
950 return -ENODEV;
951
952 hpet_select_device_channel();
953 hpet_select_clockevents();
954 hpet_reserve_platform_timers();
955 hpet_print_config();
956
957 if (!hpet_base.nr_clockevents)
958 return 0;
959
960 ret = cpuhp_setup_state(CPUHP_AP_X86_HPET_ONLINE, "x86/hpet:online",
961 hpet_cpuhp_online, NULL);
962 if (ret)
963 return ret;
964 ret = cpuhp_setup_state(CPUHP_X86_HPET_DEAD, "x86/hpet:dead", NULL,
965 hpet_cpuhp_dead);
966 if (ret)
967 goto err_cpuhp;
968 return 0;
969
970err_cpuhp:
971 cpuhp_remove_state(CPUHP_AP_X86_HPET_ONLINE);
972 return ret;
973}
974fs_initcall(hpet_late_init);
975
976void hpet_disable(void)
977{
978 unsigned int i;
979 u32 cfg;
980
981 if (!is_hpet_capable() || !hpet_virt_address)
982 return;
983
984 /* Restore boot configuration with the enable bit cleared */
985 cfg = hpet_base.boot_cfg;
986 cfg &= ~HPET_CFG_ENABLE;
987 hpet_writel(cfg, HPET_CFG);
988
989 /* Restore the channel boot configuration */
990 for (i = 0; i < hpet_base.nr_channels; i++)
991 hpet_writel(hpet_base.channels[i].boot_cfg, HPET_Tn_CFG(i));
992
993 /* If the HPET was enabled at boot time, reenable it */
994 if (hpet_base.boot_cfg & HPET_CFG_ENABLE)
995 hpet_writel(hpet_base.boot_cfg, HPET_CFG);
996}
997
998#ifdef CONFIG_HPET_EMULATE_RTC
999
1000/*
1001 * HPET in LegacyReplacement mode eats up the RTC interrupt line. When HPET
1002 * is enabled, we support RTC interrupt functionality in software.
1003 *
1004 * RTC has 3 kinds of interrupts:
1005 *
1006 * 1) Update Interrupt - generate an interrupt, every second, when the
1007 * RTC clock is updated
1008 * 2) Alarm Interrupt - generate an interrupt at a specific time of day
1009 * 3) Periodic Interrupt - generate periodic interrupt, with frequencies
1010 * 2Hz-8192Hz (2Hz-64Hz for non-root user) (all frequencies in powers of 2)
1011 *
1012 * (1) and (2) above are implemented using polling at a frequency of 64 Hz:
1013 * DEFAULT_RTC_INT_FREQ.
1014 *
1015 * The exact frequency is a tradeoff between accuracy and interrupt overhead.
1016 *
1017 * For (3), we use interrupts at 64 Hz, or the user specified periodic frequency,
1018 * if it's higher.
1019 */
1020#include <linux/mc146818rtc.h>
1021#include <linux/rtc.h>
1022
1023#define DEFAULT_RTC_INT_FREQ 64
1024#define DEFAULT_RTC_SHIFT 6
1025#define RTC_NUM_INTS 1
1026
1027static unsigned long hpet_rtc_flags;
1028static int hpet_prev_update_sec;
1029static struct rtc_time hpet_alarm_time;
1030static unsigned long hpet_pie_count;
1031static u32 hpet_t1_cmp;
1032static u32 hpet_default_delta;
1033static u32 hpet_pie_delta;
1034static unsigned long hpet_pie_limit;
1035
1036static rtc_irq_handler irq_handler;
1037
1038/*
1039 * Check that the HPET counter c1 is ahead of c2
1040 */
1041static inline int hpet_cnt_ahead(u32 c1, u32 c2)
1042{
1043 return (s32)(c2 - c1) < 0;
1044}
1045
1046/*
1047 * Registers a IRQ handler.
1048 */
1049int hpet_register_irq_handler(rtc_irq_handler handler)
1050{
1051 if (!is_hpet_enabled())
1052 return -ENODEV;
1053 if (irq_handler)
1054 return -EBUSY;
1055
1056 irq_handler = handler;
1057
1058 return 0;
1059}
1060EXPORT_SYMBOL_GPL(hpet_register_irq_handler);
1061
1062/*
1063 * Deregisters the IRQ handler registered with hpet_register_irq_handler()
1064 * and does cleanup.
1065 */
1066void hpet_unregister_irq_handler(rtc_irq_handler handler)
1067{
1068 if (!is_hpet_enabled())
1069 return;
1070
1071 irq_handler = NULL;
1072 hpet_rtc_flags = 0;
1073}
1074EXPORT_SYMBOL_GPL(hpet_unregister_irq_handler);
1075
1076/*
1077 * Channel 1 for RTC emulation. We use one shot mode, as periodic mode
1078 * is not supported by all HPET implementations for channel 1.
1079 *
1080 * hpet_rtc_timer_init() is called when the rtc is initialized.
1081 */
1082int hpet_rtc_timer_init(void)
1083{
1084 unsigned int cfg, cnt, delta;
1085 unsigned long flags;
1086
1087 if (!is_hpet_enabled())
1088 return 0;
1089
1090 if (!hpet_default_delta) {
1091 struct clock_event_device *evt = &hpet_base.channels[0].evt;
1092 uint64_t clc;
1093
1094 clc = (uint64_t) evt->mult * NSEC_PER_SEC;
1095 clc >>= evt->shift + DEFAULT_RTC_SHIFT;
1096 hpet_default_delta = clc;
1097 }
1098
1099 if (!(hpet_rtc_flags & RTC_PIE) || hpet_pie_limit)
1100 delta = hpet_default_delta;
1101 else
1102 delta = hpet_pie_delta;
1103
1104 local_irq_save(flags);
1105
1106 cnt = delta + hpet_readl(HPET_COUNTER);
1107 hpet_writel(cnt, HPET_T1_CMP);
1108 hpet_t1_cmp = cnt;
1109
1110 cfg = hpet_readl(HPET_T1_CFG);
1111 cfg &= ~HPET_TN_PERIODIC;
1112 cfg |= HPET_TN_ENABLE | HPET_TN_32BIT;
1113 hpet_writel(cfg, HPET_T1_CFG);
1114
1115 local_irq_restore(flags);
1116
1117 return 1;
1118}
1119EXPORT_SYMBOL_GPL(hpet_rtc_timer_init);
1120
1121static void hpet_disable_rtc_channel(void)
1122{
1123 u32 cfg = hpet_readl(HPET_T1_CFG);
1124
1125 cfg &= ~HPET_TN_ENABLE;
1126 hpet_writel(cfg, HPET_T1_CFG);
1127}
1128
1129/*
1130 * The functions below are called from rtc driver.
1131 * Return 0 if HPET is not being used.
1132 * Otherwise do the necessary changes and return 1.
1133 */
1134int hpet_mask_rtc_irq_bit(unsigned long bit_mask)
1135{
1136 if (!is_hpet_enabled())
1137 return 0;
1138
1139 hpet_rtc_flags &= ~bit_mask;
1140 if (unlikely(!hpet_rtc_flags))
1141 hpet_disable_rtc_channel();
1142
1143 return 1;
1144}
1145EXPORT_SYMBOL_GPL(hpet_mask_rtc_irq_bit);
1146
1147int hpet_set_rtc_irq_bit(unsigned long bit_mask)
1148{
1149 unsigned long oldbits = hpet_rtc_flags;
1150
1151 if (!is_hpet_enabled())
1152 return 0;
1153
1154 hpet_rtc_flags |= bit_mask;
1155
1156 if ((bit_mask & RTC_UIE) && !(oldbits & RTC_UIE))
1157 hpet_prev_update_sec = -1;
1158
1159 if (!oldbits)
1160 hpet_rtc_timer_init();
1161
1162 return 1;
1163}
1164EXPORT_SYMBOL_GPL(hpet_set_rtc_irq_bit);
1165
1166int hpet_set_alarm_time(unsigned char hrs, unsigned char min, unsigned char sec)
1167{
1168 if (!is_hpet_enabled())
1169 return 0;
1170
1171 hpet_alarm_time.tm_hour = hrs;
1172 hpet_alarm_time.tm_min = min;
1173 hpet_alarm_time.tm_sec = sec;
1174
1175 return 1;
1176}
1177EXPORT_SYMBOL_GPL(hpet_set_alarm_time);
1178
1179int hpet_set_periodic_freq(unsigned long freq)
1180{
1181 uint64_t clc;
1182
1183 if (!is_hpet_enabled())
1184 return 0;
1185
1186 if (freq <= DEFAULT_RTC_INT_FREQ) {
1187 hpet_pie_limit = DEFAULT_RTC_INT_FREQ / freq;
1188 } else {
1189 struct clock_event_device *evt = &hpet_base.channels[0].evt;
1190
1191 clc = (uint64_t) evt->mult * NSEC_PER_SEC;
1192 do_div(clc, freq);
1193 clc >>= evt->shift;
1194 hpet_pie_delta = clc;
1195 hpet_pie_limit = 0;
1196 }
1197
1198 return 1;
1199}
1200EXPORT_SYMBOL_GPL(hpet_set_periodic_freq);
1201
1202int hpet_rtc_dropped_irq(void)
1203{
1204 return is_hpet_enabled();
1205}
1206EXPORT_SYMBOL_GPL(hpet_rtc_dropped_irq);
1207
1208static void hpet_rtc_timer_reinit(void)
1209{
1210 unsigned int delta;
1211 int lost_ints = -1;
1212
1213 if (unlikely(!hpet_rtc_flags))
1214 hpet_disable_rtc_channel();
1215
1216 if (!(hpet_rtc_flags & RTC_PIE) || hpet_pie_limit)
1217 delta = hpet_default_delta;
1218 else
1219 delta = hpet_pie_delta;
1220
1221 /*
1222 * Increment the comparator value until we are ahead of the
1223 * current count.
1224 */
1225 do {
1226 hpet_t1_cmp += delta;
1227 hpet_writel(hpet_t1_cmp, HPET_T1_CMP);
1228 lost_ints++;
1229 } while (!hpet_cnt_ahead(hpet_t1_cmp, hpet_readl(HPET_COUNTER)));
1230
1231 if (lost_ints) {
1232 if (hpet_rtc_flags & RTC_PIE)
1233 hpet_pie_count += lost_ints;
1234 if (printk_ratelimit())
1235 pr_warn("Lost %d RTC interrupts\n", lost_ints);
1236 }
1237}
1238
1239irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id)
1240{
1241 struct rtc_time curr_time;
1242 unsigned long rtc_int_flag = 0;
1243
1244 hpet_rtc_timer_reinit();
1245 memset(&curr_time, 0, sizeof(struct rtc_time));
1246
1247 if (hpet_rtc_flags & (RTC_UIE | RTC_AIE))
1248 mc146818_get_time(&curr_time);
1249
1250 if (hpet_rtc_flags & RTC_UIE &&
1251 curr_time.tm_sec != hpet_prev_update_sec) {
1252 if (hpet_prev_update_sec >= 0)
1253 rtc_int_flag = RTC_UF;
1254 hpet_prev_update_sec = curr_time.tm_sec;
1255 }
1256
1257 if (hpet_rtc_flags & RTC_PIE && ++hpet_pie_count >= hpet_pie_limit) {
1258 rtc_int_flag |= RTC_PF;
1259 hpet_pie_count = 0;
1260 }
1261
1262 if (hpet_rtc_flags & RTC_AIE &&
1263 (curr_time.tm_sec == hpet_alarm_time.tm_sec) &&
1264 (curr_time.tm_min == hpet_alarm_time.tm_min) &&
1265 (curr_time.tm_hour == hpet_alarm_time.tm_hour))
1266 rtc_int_flag |= RTC_AF;
1267
1268 if (rtc_int_flag) {
1269 rtc_int_flag |= (RTC_IRQF | (RTC_NUM_INTS << 8));
1270 if (irq_handler)
1271 irq_handler(rtc_int_flag, dev_id);
1272 }
1273 return IRQ_HANDLED;
1274}
1275EXPORT_SYMBOL_GPL(hpet_rtc_interrupt);
1276#endif
1#include <linux/clocksource.h>
2#include <linux/clockchips.h>
3#include <linux/interrupt.h>
4#include <linux/export.h>
5#include <linux/delay.h>
6#include <linux/errno.h>
7#include <linux/i8253.h>
8#include <linux/slab.h>
9#include <linux/hpet.h>
10#include <linux/init.h>
11#include <linux/cpu.h>
12#include <linux/pm.h>
13#include <linux/io.h>
14
15#include <asm/cpufeature.h>
16#include <asm/irqdomain.h>
17#include <asm/fixmap.h>
18#include <asm/hpet.h>
19#include <asm/time.h>
20
21#define HPET_MASK CLOCKSOURCE_MASK(32)
22
23/* FSEC = 10^-15
24 NSEC = 10^-9 */
25#define FSEC_PER_NSEC 1000000L
26
27#define HPET_DEV_USED_BIT 2
28#define HPET_DEV_USED (1 << HPET_DEV_USED_BIT)
29#define HPET_DEV_VALID 0x8
30#define HPET_DEV_FSB_CAP 0x1000
31#define HPET_DEV_PERI_CAP 0x2000
32
33#define HPET_MIN_CYCLES 128
34#define HPET_MIN_PROG_DELTA (HPET_MIN_CYCLES + (HPET_MIN_CYCLES >> 1))
35
36/*
37 * HPET address is set in acpi/boot.c, when an ACPI entry exists
38 */
39unsigned long hpet_address;
40u8 hpet_blockid; /* OS timer block num */
41bool hpet_msi_disable;
42
43#ifdef CONFIG_PCI_MSI
44static unsigned int hpet_num_timers;
45#endif
46static void __iomem *hpet_virt_address;
47
48struct hpet_dev {
49 struct clock_event_device evt;
50 unsigned int num;
51 int cpu;
52 unsigned int irq;
53 unsigned int flags;
54 char name[10];
55};
56
57inline struct hpet_dev *EVT_TO_HPET_DEV(struct clock_event_device *evtdev)
58{
59 return container_of(evtdev, struct hpet_dev, evt);
60}
61
62inline unsigned int hpet_readl(unsigned int a)
63{
64 return readl(hpet_virt_address + a);
65}
66
67static inline void hpet_writel(unsigned int d, unsigned int a)
68{
69 writel(d, hpet_virt_address + a);
70}
71
72#ifdef CONFIG_X86_64
73#include <asm/pgtable.h>
74#endif
75
76static inline void hpet_set_mapping(void)
77{
78 hpet_virt_address = ioremap_nocache(hpet_address, HPET_MMAP_SIZE);
79}
80
81static inline void hpet_clear_mapping(void)
82{
83 iounmap(hpet_virt_address);
84 hpet_virt_address = NULL;
85}
86
87/*
88 * HPET command line enable / disable
89 */
90bool boot_hpet_disable;
91bool hpet_force_user;
92static bool hpet_verbose;
93
94static int __init hpet_setup(char *str)
95{
96 while (str) {
97 char *next = strchr(str, ',');
98
99 if (next)
100 *next++ = 0;
101 if (!strncmp("disable", str, 7))
102 boot_hpet_disable = true;
103 if (!strncmp("force", str, 5))
104 hpet_force_user = true;
105 if (!strncmp("verbose", str, 7))
106 hpet_verbose = true;
107 str = next;
108 }
109 return 1;
110}
111__setup("hpet=", hpet_setup);
112
113static int __init disable_hpet(char *str)
114{
115 boot_hpet_disable = true;
116 return 1;
117}
118__setup("nohpet", disable_hpet);
119
120static inline int is_hpet_capable(void)
121{
122 return !boot_hpet_disable && hpet_address;
123}
124
125/*
126 * HPET timer interrupt enable / disable
127 */
128static bool hpet_legacy_int_enabled;
129
130/**
131 * is_hpet_enabled - check whether the hpet timer interrupt is enabled
132 */
133int is_hpet_enabled(void)
134{
135 return is_hpet_capable() && hpet_legacy_int_enabled;
136}
137EXPORT_SYMBOL_GPL(is_hpet_enabled);
138
139static void _hpet_print_config(const char *function, int line)
140{
141 u32 i, timers, l, h;
142 printk(KERN_INFO "hpet: %s(%d):\n", function, line);
143 l = hpet_readl(HPET_ID);
144 h = hpet_readl(HPET_PERIOD);
145 timers = ((l & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT) + 1;
146 printk(KERN_INFO "hpet: ID: 0x%x, PERIOD: 0x%x\n", l, h);
147 l = hpet_readl(HPET_CFG);
148 h = hpet_readl(HPET_STATUS);
149 printk(KERN_INFO "hpet: CFG: 0x%x, STATUS: 0x%x\n", l, h);
150 l = hpet_readl(HPET_COUNTER);
151 h = hpet_readl(HPET_COUNTER+4);
152 printk(KERN_INFO "hpet: COUNTER_l: 0x%x, COUNTER_h: 0x%x\n", l, h);
153
154 for (i = 0; i < timers; i++) {
155 l = hpet_readl(HPET_Tn_CFG(i));
156 h = hpet_readl(HPET_Tn_CFG(i)+4);
157 printk(KERN_INFO "hpet: T%d: CFG_l: 0x%x, CFG_h: 0x%x\n",
158 i, l, h);
159 l = hpet_readl(HPET_Tn_CMP(i));
160 h = hpet_readl(HPET_Tn_CMP(i)+4);
161 printk(KERN_INFO "hpet: T%d: CMP_l: 0x%x, CMP_h: 0x%x\n",
162 i, l, h);
163 l = hpet_readl(HPET_Tn_ROUTE(i));
164 h = hpet_readl(HPET_Tn_ROUTE(i)+4);
165 printk(KERN_INFO "hpet: T%d ROUTE_l: 0x%x, ROUTE_h: 0x%x\n",
166 i, l, h);
167 }
168}
169
170#define hpet_print_config() \
171do { \
172 if (hpet_verbose) \
173 _hpet_print_config(__func__, __LINE__); \
174} while (0)
175
176/*
177 * When the hpet driver (/dev/hpet) is enabled, we need to reserve
178 * timer 0 and timer 1 in case of RTC emulation.
179 */
180#ifdef CONFIG_HPET
181
182static void hpet_reserve_msi_timers(struct hpet_data *hd);
183
184static void hpet_reserve_platform_timers(unsigned int id)
185{
186 struct hpet __iomem *hpet = hpet_virt_address;
187 struct hpet_timer __iomem *timer = &hpet->hpet_timers[2];
188 unsigned int nrtimers, i;
189 struct hpet_data hd;
190
191 nrtimers = ((id & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT) + 1;
192
193 memset(&hd, 0, sizeof(hd));
194 hd.hd_phys_address = hpet_address;
195 hd.hd_address = hpet;
196 hd.hd_nirqs = nrtimers;
197 hpet_reserve_timer(&hd, 0);
198
199#ifdef CONFIG_HPET_EMULATE_RTC
200 hpet_reserve_timer(&hd, 1);
201#endif
202
203 /*
204 * NOTE that hd_irq[] reflects IOAPIC input pins (LEGACY_8254
205 * is wrong for i8259!) not the output IRQ. Many BIOS writers
206 * don't bother configuring *any* comparator interrupts.
207 */
208 hd.hd_irq[0] = HPET_LEGACY_8254;
209 hd.hd_irq[1] = HPET_LEGACY_RTC;
210
211 for (i = 2; i < nrtimers; timer++, i++) {
212 hd.hd_irq[i] = (readl(&timer->hpet_config) &
213 Tn_INT_ROUTE_CNF_MASK) >> Tn_INT_ROUTE_CNF_SHIFT;
214 }
215
216 hpet_reserve_msi_timers(&hd);
217
218 hpet_alloc(&hd);
219
220}
221#else
222static void hpet_reserve_platform_timers(unsigned int id) { }
223#endif
224
225/*
226 * Common hpet info
227 */
228static unsigned long hpet_freq;
229
230static struct clock_event_device hpet_clockevent;
231
232static void hpet_stop_counter(void)
233{
234 u32 cfg = hpet_readl(HPET_CFG);
235 cfg &= ~HPET_CFG_ENABLE;
236 hpet_writel(cfg, HPET_CFG);
237}
238
239static void hpet_reset_counter(void)
240{
241 hpet_writel(0, HPET_COUNTER);
242 hpet_writel(0, HPET_COUNTER + 4);
243}
244
245static void hpet_start_counter(void)
246{
247 unsigned int cfg = hpet_readl(HPET_CFG);
248 cfg |= HPET_CFG_ENABLE;
249 hpet_writel(cfg, HPET_CFG);
250}
251
252static void hpet_restart_counter(void)
253{
254 hpet_stop_counter();
255 hpet_reset_counter();
256 hpet_start_counter();
257}
258
259static void hpet_resume_device(void)
260{
261 force_hpet_resume();
262}
263
264static void hpet_resume_counter(struct clocksource *cs)
265{
266 hpet_resume_device();
267 hpet_restart_counter();
268}
269
270static void hpet_enable_legacy_int(void)
271{
272 unsigned int cfg = hpet_readl(HPET_CFG);
273
274 cfg |= HPET_CFG_LEGACY;
275 hpet_writel(cfg, HPET_CFG);
276 hpet_legacy_int_enabled = true;
277}
278
279static void hpet_legacy_clockevent_register(void)
280{
281 /* Start HPET legacy interrupts */
282 hpet_enable_legacy_int();
283
284 /*
285 * Start hpet with the boot cpu mask and make it
286 * global after the IO_APIC has been initialized.
287 */
288 hpet_clockevent.cpumask = cpumask_of(smp_processor_id());
289 clockevents_config_and_register(&hpet_clockevent, hpet_freq,
290 HPET_MIN_PROG_DELTA, 0x7FFFFFFF);
291 global_clock_event = &hpet_clockevent;
292 printk(KERN_DEBUG "hpet clockevent registered\n");
293}
294
295static int hpet_set_periodic(struct clock_event_device *evt, int timer)
296{
297 unsigned int cfg, cmp, now;
298 uint64_t delta;
299
300 hpet_stop_counter();
301 delta = ((uint64_t)(NSEC_PER_SEC / HZ)) * evt->mult;
302 delta >>= evt->shift;
303 now = hpet_readl(HPET_COUNTER);
304 cmp = now + (unsigned int)delta;
305 cfg = hpet_readl(HPET_Tn_CFG(timer));
306 cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC | HPET_TN_SETVAL |
307 HPET_TN_32BIT;
308 hpet_writel(cfg, HPET_Tn_CFG(timer));
309 hpet_writel(cmp, HPET_Tn_CMP(timer));
310 udelay(1);
311 /*
312 * HPET on AMD 81xx needs a second write (with HPET_TN_SETVAL
313 * cleared) to T0_CMP to set the period. The HPET_TN_SETVAL
314 * bit is automatically cleared after the first write.
315 * (See AMD-8111 HyperTransport I/O Hub Data Sheet,
316 * Publication # 24674)
317 */
318 hpet_writel((unsigned int)delta, HPET_Tn_CMP(timer));
319 hpet_start_counter();
320 hpet_print_config();
321
322 return 0;
323}
324
325static int hpet_set_oneshot(struct clock_event_device *evt, int timer)
326{
327 unsigned int cfg;
328
329 cfg = hpet_readl(HPET_Tn_CFG(timer));
330 cfg &= ~HPET_TN_PERIODIC;
331 cfg |= HPET_TN_ENABLE | HPET_TN_32BIT;
332 hpet_writel(cfg, HPET_Tn_CFG(timer));
333
334 return 0;
335}
336
337static int hpet_shutdown(struct clock_event_device *evt, int timer)
338{
339 unsigned int cfg;
340
341 cfg = hpet_readl(HPET_Tn_CFG(timer));
342 cfg &= ~HPET_TN_ENABLE;
343 hpet_writel(cfg, HPET_Tn_CFG(timer));
344
345 return 0;
346}
347
348static int hpet_resume(struct clock_event_device *evt, int timer)
349{
350 if (!timer) {
351 hpet_enable_legacy_int();
352 } else {
353 struct hpet_dev *hdev = EVT_TO_HPET_DEV(evt);
354
355 irq_domain_activate_irq(irq_get_irq_data(hdev->irq));
356 disable_irq(hdev->irq);
357 irq_set_affinity(hdev->irq, cpumask_of(hdev->cpu));
358 enable_irq(hdev->irq);
359 }
360 hpet_print_config();
361
362 return 0;
363}
364
365static int hpet_next_event(unsigned long delta,
366 struct clock_event_device *evt, int timer)
367{
368 u32 cnt;
369 s32 res;
370
371 cnt = hpet_readl(HPET_COUNTER);
372 cnt += (u32) delta;
373 hpet_writel(cnt, HPET_Tn_CMP(timer));
374
375 /*
376 * HPETs are a complete disaster. The compare register is
377 * based on a equal comparison and neither provides a less
378 * than or equal functionality (which would require to take
379 * the wraparound into account) nor a simple count down event
380 * mode. Further the write to the comparator register is
381 * delayed internally up to two HPET clock cycles in certain
382 * chipsets (ATI, ICH9,10). Some newer AMD chipsets have even
383 * longer delays. We worked around that by reading back the
384 * compare register, but that required another workaround for
385 * ICH9,10 chips where the first readout after write can
386 * return the old stale value. We already had a minimum
387 * programming delta of 5us enforced, but a NMI or SMI hitting
388 * between the counter readout and the comparator write can
389 * move us behind that point easily. Now instead of reading
390 * the compare register back several times, we make the ETIME
391 * decision based on the following: Return ETIME if the
392 * counter value after the write is less than HPET_MIN_CYCLES
393 * away from the event or if the counter is already ahead of
394 * the event. The minimum programming delta for the generic
395 * clockevents code is set to 1.5 * HPET_MIN_CYCLES.
396 */
397 res = (s32)(cnt - hpet_readl(HPET_COUNTER));
398
399 return res < HPET_MIN_CYCLES ? -ETIME : 0;
400}
401
402static int hpet_legacy_shutdown(struct clock_event_device *evt)
403{
404 return hpet_shutdown(evt, 0);
405}
406
407static int hpet_legacy_set_oneshot(struct clock_event_device *evt)
408{
409 return hpet_set_oneshot(evt, 0);
410}
411
412static int hpet_legacy_set_periodic(struct clock_event_device *evt)
413{
414 return hpet_set_periodic(evt, 0);
415}
416
417static int hpet_legacy_resume(struct clock_event_device *evt)
418{
419 return hpet_resume(evt, 0);
420}
421
422static int hpet_legacy_next_event(unsigned long delta,
423 struct clock_event_device *evt)
424{
425 return hpet_next_event(delta, evt, 0);
426}
427
428/*
429 * The hpet clock event device
430 */
431static struct clock_event_device hpet_clockevent = {
432 .name = "hpet",
433 .features = CLOCK_EVT_FEAT_PERIODIC |
434 CLOCK_EVT_FEAT_ONESHOT,
435 .set_state_periodic = hpet_legacy_set_periodic,
436 .set_state_oneshot = hpet_legacy_set_oneshot,
437 .set_state_shutdown = hpet_legacy_shutdown,
438 .tick_resume = hpet_legacy_resume,
439 .set_next_event = hpet_legacy_next_event,
440 .irq = 0,
441 .rating = 50,
442};
443
444/*
445 * HPET MSI Support
446 */
447#ifdef CONFIG_PCI_MSI
448
449static DEFINE_PER_CPU(struct hpet_dev *, cpu_hpet_dev);
450static struct hpet_dev *hpet_devs;
451static struct irq_domain *hpet_domain;
452
453void hpet_msi_unmask(struct irq_data *data)
454{
455 struct hpet_dev *hdev = irq_data_get_irq_handler_data(data);
456 unsigned int cfg;
457
458 /* unmask it */
459 cfg = hpet_readl(HPET_Tn_CFG(hdev->num));
460 cfg |= HPET_TN_ENABLE | HPET_TN_FSB;
461 hpet_writel(cfg, HPET_Tn_CFG(hdev->num));
462}
463
464void hpet_msi_mask(struct irq_data *data)
465{
466 struct hpet_dev *hdev = irq_data_get_irq_handler_data(data);
467 unsigned int cfg;
468
469 /* mask it */
470 cfg = hpet_readl(HPET_Tn_CFG(hdev->num));
471 cfg &= ~(HPET_TN_ENABLE | HPET_TN_FSB);
472 hpet_writel(cfg, HPET_Tn_CFG(hdev->num));
473}
474
475void hpet_msi_write(struct hpet_dev *hdev, struct msi_msg *msg)
476{
477 hpet_writel(msg->data, HPET_Tn_ROUTE(hdev->num));
478 hpet_writel(msg->address_lo, HPET_Tn_ROUTE(hdev->num) + 4);
479}
480
481void hpet_msi_read(struct hpet_dev *hdev, struct msi_msg *msg)
482{
483 msg->data = hpet_readl(HPET_Tn_ROUTE(hdev->num));
484 msg->address_lo = hpet_readl(HPET_Tn_ROUTE(hdev->num) + 4);
485 msg->address_hi = 0;
486}
487
488static int hpet_msi_shutdown(struct clock_event_device *evt)
489{
490 struct hpet_dev *hdev = EVT_TO_HPET_DEV(evt);
491
492 return hpet_shutdown(evt, hdev->num);
493}
494
495static int hpet_msi_set_oneshot(struct clock_event_device *evt)
496{
497 struct hpet_dev *hdev = EVT_TO_HPET_DEV(evt);
498
499 return hpet_set_oneshot(evt, hdev->num);
500}
501
502static int hpet_msi_set_periodic(struct clock_event_device *evt)
503{
504 struct hpet_dev *hdev = EVT_TO_HPET_DEV(evt);
505
506 return hpet_set_periodic(evt, hdev->num);
507}
508
509static int hpet_msi_resume(struct clock_event_device *evt)
510{
511 struct hpet_dev *hdev = EVT_TO_HPET_DEV(evt);
512
513 return hpet_resume(evt, hdev->num);
514}
515
516static int hpet_msi_next_event(unsigned long delta,
517 struct clock_event_device *evt)
518{
519 struct hpet_dev *hdev = EVT_TO_HPET_DEV(evt);
520 return hpet_next_event(delta, evt, hdev->num);
521}
522
523static irqreturn_t hpet_interrupt_handler(int irq, void *data)
524{
525 struct hpet_dev *dev = (struct hpet_dev *)data;
526 struct clock_event_device *hevt = &dev->evt;
527
528 if (!hevt->event_handler) {
529 printk(KERN_INFO "Spurious HPET timer interrupt on HPET timer %d\n",
530 dev->num);
531 return IRQ_HANDLED;
532 }
533
534 hevt->event_handler(hevt);
535 return IRQ_HANDLED;
536}
537
538static int hpet_setup_irq(struct hpet_dev *dev)
539{
540
541 if (request_irq(dev->irq, hpet_interrupt_handler,
542 IRQF_TIMER | IRQF_NOBALANCING,
543 dev->name, dev))
544 return -1;
545
546 disable_irq(dev->irq);
547 irq_set_affinity(dev->irq, cpumask_of(dev->cpu));
548 enable_irq(dev->irq);
549
550 printk(KERN_DEBUG "hpet: %s irq %d for MSI\n",
551 dev->name, dev->irq);
552
553 return 0;
554}
555
556/* This should be called in specific @cpu */
557static void init_one_hpet_msi_clockevent(struct hpet_dev *hdev, int cpu)
558{
559 struct clock_event_device *evt = &hdev->evt;
560
561 WARN_ON(cpu != smp_processor_id());
562 if (!(hdev->flags & HPET_DEV_VALID))
563 return;
564
565 hdev->cpu = cpu;
566 per_cpu(cpu_hpet_dev, cpu) = hdev;
567 evt->name = hdev->name;
568 hpet_setup_irq(hdev);
569 evt->irq = hdev->irq;
570
571 evt->rating = 110;
572 evt->features = CLOCK_EVT_FEAT_ONESHOT;
573 if (hdev->flags & HPET_DEV_PERI_CAP) {
574 evt->features |= CLOCK_EVT_FEAT_PERIODIC;
575 evt->set_state_periodic = hpet_msi_set_periodic;
576 }
577
578 evt->set_state_shutdown = hpet_msi_shutdown;
579 evt->set_state_oneshot = hpet_msi_set_oneshot;
580 evt->tick_resume = hpet_msi_resume;
581 evt->set_next_event = hpet_msi_next_event;
582 evt->cpumask = cpumask_of(hdev->cpu);
583
584 clockevents_config_and_register(evt, hpet_freq, HPET_MIN_PROG_DELTA,
585 0x7FFFFFFF);
586}
587
588#ifdef CONFIG_HPET
589/* Reserve at least one timer for userspace (/dev/hpet) */
590#define RESERVE_TIMERS 1
591#else
592#define RESERVE_TIMERS 0
593#endif
594
595static void hpet_msi_capability_lookup(unsigned int start_timer)
596{
597 unsigned int id;
598 unsigned int num_timers;
599 unsigned int num_timers_used = 0;
600 int i, irq;
601
602 if (hpet_msi_disable)
603 return;
604
605 if (boot_cpu_has(X86_FEATURE_ARAT))
606 return;
607 id = hpet_readl(HPET_ID);
608
609 num_timers = ((id & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT);
610 num_timers++; /* Value read out starts from 0 */
611 hpet_print_config();
612
613 hpet_domain = hpet_create_irq_domain(hpet_blockid);
614 if (!hpet_domain)
615 return;
616
617 hpet_devs = kzalloc(sizeof(struct hpet_dev) * num_timers, GFP_KERNEL);
618 if (!hpet_devs)
619 return;
620
621 hpet_num_timers = num_timers;
622
623 for (i = start_timer; i < num_timers - RESERVE_TIMERS; i++) {
624 struct hpet_dev *hdev = &hpet_devs[num_timers_used];
625 unsigned int cfg = hpet_readl(HPET_Tn_CFG(i));
626
627 /* Only consider HPET timer with MSI support */
628 if (!(cfg & HPET_TN_FSB_CAP))
629 continue;
630
631 hdev->flags = 0;
632 if (cfg & HPET_TN_PERIODIC_CAP)
633 hdev->flags |= HPET_DEV_PERI_CAP;
634 sprintf(hdev->name, "hpet%d", i);
635 hdev->num = i;
636
637 irq = hpet_assign_irq(hpet_domain, hdev, hdev->num);
638 if (irq <= 0)
639 continue;
640
641 hdev->irq = irq;
642 hdev->flags |= HPET_DEV_FSB_CAP;
643 hdev->flags |= HPET_DEV_VALID;
644 num_timers_used++;
645 if (num_timers_used == num_possible_cpus())
646 break;
647 }
648
649 printk(KERN_INFO "HPET: %d timers in total, %d timers will be used for per-cpu timer\n",
650 num_timers, num_timers_used);
651}
652
653#ifdef CONFIG_HPET
654static void hpet_reserve_msi_timers(struct hpet_data *hd)
655{
656 int i;
657
658 if (!hpet_devs)
659 return;
660
661 for (i = 0; i < hpet_num_timers; i++) {
662 struct hpet_dev *hdev = &hpet_devs[i];
663
664 if (!(hdev->flags & HPET_DEV_VALID))
665 continue;
666
667 hd->hd_irq[hdev->num] = hdev->irq;
668 hpet_reserve_timer(hd, hdev->num);
669 }
670}
671#endif
672
673static struct hpet_dev *hpet_get_unused_timer(void)
674{
675 int i;
676
677 if (!hpet_devs)
678 return NULL;
679
680 for (i = 0; i < hpet_num_timers; i++) {
681 struct hpet_dev *hdev = &hpet_devs[i];
682
683 if (!(hdev->flags & HPET_DEV_VALID))
684 continue;
685 if (test_and_set_bit(HPET_DEV_USED_BIT,
686 (unsigned long *)&hdev->flags))
687 continue;
688 return hdev;
689 }
690 return NULL;
691}
692
693struct hpet_work_struct {
694 struct delayed_work work;
695 struct completion complete;
696};
697
698static void hpet_work(struct work_struct *w)
699{
700 struct hpet_dev *hdev;
701 int cpu = smp_processor_id();
702 struct hpet_work_struct *hpet_work;
703
704 hpet_work = container_of(w, struct hpet_work_struct, work.work);
705
706 hdev = hpet_get_unused_timer();
707 if (hdev)
708 init_one_hpet_msi_clockevent(hdev, cpu);
709
710 complete(&hpet_work->complete);
711}
712
713static int hpet_cpuhp_notify(struct notifier_block *n,
714 unsigned long action, void *hcpu)
715{
716 unsigned long cpu = (unsigned long)hcpu;
717 struct hpet_work_struct work;
718 struct hpet_dev *hdev = per_cpu(cpu_hpet_dev, cpu);
719
720 switch (action & ~CPU_TASKS_FROZEN) {
721 case CPU_ONLINE:
722 INIT_DELAYED_WORK_ONSTACK(&work.work, hpet_work);
723 init_completion(&work.complete);
724 /* FIXME: add schedule_work_on() */
725 schedule_delayed_work_on(cpu, &work.work, 0);
726 wait_for_completion(&work.complete);
727 destroy_delayed_work_on_stack(&work.work);
728 break;
729 case CPU_DEAD:
730 if (hdev) {
731 free_irq(hdev->irq, hdev);
732 hdev->flags &= ~HPET_DEV_USED;
733 per_cpu(cpu_hpet_dev, cpu) = NULL;
734 }
735 break;
736 }
737 return NOTIFY_OK;
738}
739#else
740
741static void hpet_msi_capability_lookup(unsigned int start_timer)
742{
743 return;
744}
745
746#ifdef CONFIG_HPET
747static void hpet_reserve_msi_timers(struct hpet_data *hd)
748{
749 return;
750}
751#endif
752
753static int hpet_cpuhp_notify(struct notifier_block *n,
754 unsigned long action, void *hcpu)
755{
756 return NOTIFY_OK;
757}
758
759#endif
760
761/*
762 * Clock source related code
763 */
764static cycle_t read_hpet(struct clocksource *cs)
765{
766 return (cycle_t)hpet_readl(HPET_COUNTER);
767}
768
769static struct clocksource clocksource_hpet = {
770 .name = "hpet",
771 .rating = 250,
772 .read = read_hpet,
773 .mask = HPET_MASK,
774 .flags = CLOCK_SOURCE_IS_CONTINUOUS,
775 .resume = hpet_resume_counter,
776 .archdata = { .vclock_mode = VCLOCK_HPET },
777};
778
779static int hpet_clocksource_register(void)
780{
781 u64 start, now;
782 cycle_t t1;
783
784 /* Start the counter */
785 hpet_restart_counter();
786
787 /* Verify whether hpet counter works */
788 t1 = hpet_readl(HPET_COUNTER);
789 start = rdtsc();
790
791 /*
792 * We don't know the TSC frequency yet, but waiting for
793 * 200000 TSC cycles is safe:
794 * 4 GHz == 50us
795 * 1 GHz == 200us
796 */
797 do {
798 rep_nop();
799 now = rdtsc();
800 } while ((now - start) < 200000UL);
801
802 if (t1 == hpet_readl(HPET_COUNTER)) {
803 printk(KERN_WARNING
804 "HPET counter not counting. HPET disabled\n");
805 return -ENODEV;
806 }
807
808 clocksource_register_hz(&clocksource_hpet, (u32)hpet_freq);
809 return 0;
810}
811
812static u32 *hpet_boot_cfg;
813
814/**
815 * hpet_enable - Try to setup the HPET timer. Returns 1 on success.
816 */
817int __init hpet_enable(void)
818{
819 u32 hpet_period, cfg, id;
820 u64 freq;
821 unsigned int i, last;
822
823 if (!is_hpet_capable())
824 return 0;
825
826 hpet_set_mapping();
827
828 /*
829 * Read the period and check for a sane value:
830 */
831 hpet_period = hpet_readl(HPET_PERIOD);
832
833 /*
834 * AMD SB700 based systems with spread spectrum enabled use a
835 * SMM based HPET emulation to provide proper frequency
836 * setting. The SMM code is initialized with the first HPET
837 * register access and takes some time to complete. During
838 * this time the config register reads 0xffffffff. We check
839 * for max. 1000 loops whether the config register reads a non
840 * 0xffffffff value to make sure that HPET is up and running
841 * before we go further. A counting loop is safe, as the HPET
842 * access takes thousands of CPU cycles. On non SB700 based
843 * machines this check is only done once and has no side
844 * effects.
845 */
846 for (i = 0; hpet_readl(HPET_CFG) == 0xFFFFFFFF; i++) {
847 if (i == 1000) {
848 printk(KERN_WARNING
849 "HPET config register value = 0xFFFFFFFF. "
850 "Disabling HPET\n");
851 goto out_nohpet;
852 }
853 }
854
855 if (hpet_period < HPET_MIN_PERIOD || hpet_period > HPET_MAX_PERIOD)
856 goto out_nohpet;
857
858 /*
859 * The period is a femto seconds value. Convert it to a
860 * frequency.
861 */
862 freq = FSEC_PER_SEC;
863 do_div(freq, hpet_period);
864 hpet_freq = freq;
865
866 /*
867 * Read the HPET ID register to retrieve the IRQ routing
868 * information and the number of channels
869 */
870 id = hpet_readl(HPET_ID);
871 hpet_print_config();
872
873 last = (id & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT;
874
875#ifdef CONFIG_HPET_EMULATE_RTC
876 /*
877 * The legacy routing mode needs at least two channels, tick timer
878 * and the rtc emulation channel.
879 */
880 if (!last)
881 goto out_nohpet;
882#endif
883
884 cfg = hpet_readl(HPET_CFG);
885 hpet_boot_cfg = kmalloc((last + 2) * sizeof(*hpet_boot_cfg),
886 GFP_KERNEL);
887 if (hpet_boot_cfg)
888 *hpet_boot_cfg = cfg;
889 else
890 pr_warn("HPET initial state will not be saved\n");
891 cfg &= ~(HPET_CFG_ENABLE | HPET_CFG_LEGACY);
892 hpet_writel(cfg, HPET_CFG);
893 if (cfg)
894 pr_warn("HPET: Unrecognized bits %#x set in global cfg\n",
895 cfg);
896
897 for (i = 0; i <= last; ++i) {
898 cfg = hpet_readl(HPET_Tn_CFG(i));
899 if (hpet_boot_cfg)
900 hpet_boot_cfg[i + 1] = cfg;
901 cfg &= ~(HPET_TN_ENABLE | HPET_TN_LEVEL | HPET_TN_FSB);
902 hpet_writel(cfg, HPET_Tn_CFG(i));
903 cfg &= ~(HPET_TN_PERIODIC | HPET_TN_PERIODIC_CAP
904 | HPET_TN_64BIT_CAP | HPET_TN_32BIT | HPET_TN_ROUTE
905 | HPET_TN_FSB | HPET_TN_FSB_CAP);
906 if (cfg)
907 pr_warn("HPET: Unrecognized bits %#x set in cfg#%u\n",
908 cfg, i);
909 }
910 hpet_print_config();
911
912 if (hpet_clocksource_register())
913 goto out_nohpet;
914
915 if (id & HPET_ID_LEGSUP) {
916 hpet_legacy_clockevent_register();
917 return 1;
918 }
919 return 0;
920
921out_nohpet:
922 hpet_clear_mapping();
923 hpet_address = 0;
924 return 0;
925}
926
927/*
928 * Needs to be late, as the reserve_timer code calls kalloc !
929 *
930 * Not a problem on i386 as hpet_enable is called from late_time_init,
931 * but on x86_64 it is necessary !
932 */
933static __init int hpet_late_init(void)
934{
935 int cpu;
936
937 if (boot_hpet_disable)
938 return -ENODEV;
939
940 if (!hpet_address) {
941 if (!force_hpet_address)
942 return -ENODEV;
943
944 hpet_address = force_hpet_address;
945 hpet_enable();
946 }
947
948 if (!hpet_virt_address)
949 return -ENODEV;
950
951 if (hpet_readl(HPET_ID) & HPET_ID_LEGSUP)
952 hpet_msi_capability_lookup(2);
953 else
954 hpet_msi_capability_lookup(0);
955
956 hpet_reserve_platform_timers(hpet_readl(HPET_ID));
957 hpet_print_config();
958
959 if (hpet_msi_disable)
960 return 0;
961
962 if (boot_cpu_has(X86_FEATURE_ARAT))
963 return 0;
964
965 cpu_notifier_register_begin();
966 for_each_online_cpu(cpu) {
967 hpet_cpuhp_notify(NULL, CPU_ONLINE, (void *)(long)cpu);
968 }
969
970 /* This notifier should be called after workqueue is ready */
971 __hotcpu_notifier(hpet_cpuhp_notify, -20);
972 cpu_notifier_register_done();
973
974 return 0;
975}
976fs_initcall(hpet_late_init);
977
978void hpet_disable(void)
979{
980 if (is_hpet_capable() && hpet_virt_address) {
981 unsigned int cfg = hpet_readl(HPET_CFG), id, last;
982
983 if (hpet_boot_cfg)
984 cfg = *hpet_boot_cfg;
985 else if (hpet_legacy_int_enabled) {
986 cfg &= ~HPET_CFG_LEGACY;
987 hpet_legacy_int_enabled = false;
988 }
989 cfg &= ~HPET_CFG_ENABLE;
990 hpet_writel(cfg, HPET_CFG);
991
992 if (!hpet_boot_cfg)
993 return;
994
995 id = hpet_readl(HPET_ID);
996 last = ((id & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT);
997
998 for (id = 0; id <= last; ++id)
999 hpet_writel(hpet_boot_cfg[id + 1], HPET_Tn_CFG(id));
1000
1001 if (*hpet_boot_cfg & HPET_CFG_ENABLE)
1002 hpet_writel(*hpet_boot_cfg, HPET_CFG);
1003 }
1004}
1005
1006#ifdef CONFIG_HPET_EMULATE_RTC
1007
1008/* HPET in LegacyReplacement Mode eats up RTC interrupt line. When, HPET
1009 * is enabled, we support RTC interrupt functionality in software.
1010 * RTC has 3 kinds of interrupts:
1011 * 1) Update Interrupt - generate an interrupt, every sec, when RTC clock
1012 * is updated
1013 * 2) Alarm Interrupt - generate an interrupt at a specific time of day
1014 * 3) Periodic Interrupt - generate periodic interrupt, with frequencies
1015 * 2Hz-8192Hz (2Hz-64Hz for non-root user) (all freqs in powers of 2)
1016 * (1) and (2) above are implemented using polling at a frequency of
1017 * 64 Hz. The exact frequency is a tradeoff between accuracy and interrupt
1018 * overhead. (DEFAULT_RTC_INT_FREQ)
1019 * For (3), we use interrupts at 64Hz or user specified periodic
1020 * frequency, whichever is higher.
1021 */
1022#include <linux/mc146818rtc.h>
1023#include <linux/rtc.h>
1024#include <asm/rtc.h>
1025
1026#define DEFAULT_RTC_INT_FREQ 64
1027#define DEFAULT_RTC_SHIFT 6
1028#define RTC_NUM_INTS 1
1029
1030static unsigned long hpet_rtc_flags;
1031static int hpet_prev_update_sec;
1032static struct rtc_time hpet_alarm_time;
1033static unsigned long hpet_pie_count;
1034static u32 hpet_t1_cmp;
1035static u32 hpet_default_delta;
1036static u32 hpet_pie_delta;
1037static unsigned long hpet_pie_limit;
1038
1039static rtc_irq_handler irq_handler;
1040
1041/*
1042 * Check that the hpet counter c1 is ahead of the c2
1043 */
1044static inline int hpet_cnt_ahead(u32 c1, u32 c2)
1045{
1046 return (s32)(c2 - c1) < 0;
1047}
1048
1049/*
1050 * Registers a IRQ handler.
1051 */
1052int hpet_register_irq_handler(rtc_irq_handler handler)
1053{
1054 if (!is_hpet_enabled())
1055 return -ENODEV;
1056 if (irq_handler)
1057 return -EBUSY;
1058
1059 irq_handler = handler;
1060
1061 return 0;
1062}
1063EXPORT_SYMBOL_GPL(hpet_register_irq_handler);
1064
1065/*
1066 * Deregisters the IRQ handler registered with hpet_register_irq_handler()
1067 * and does cleanup.
1068 */
1069void hpet_unregister_irq_handler(rtc_irq_handler handler)
1070{
1071 if (!is_hpet_enabled())
1072 return;
1073
1074 irq_handler = NULL;
1075 hpet_rtc_flags = 0;
1076}
1077EXPORT_SYMBOL_GPL(hpet_unregister_irq_handler);
1078
1079/*
1080 * Timer 1 for RTC emulation. We use one shot mode, as periodic mode
1081 * is not supported by all HPET implementations for timer 1.
1082 *
1083 * hpet_rtc_timer_init() is called when the rtc is initialized.
1084 */
1085int hpet_rtc_timer_init(void)
1086{
1087 unsigned int cfg, cnt, delta;
1088 unsigned long flags;
1089
1090 if (!is_hpet_enabled())
1091 return 0;
1092
1093 if (!hpet_default_delta) {
1094 uint64_t clc;
1095
1096 clc = (uint64_t) hpet_clockevent.mult * NSEC_PER_SEC;
1097 clc >>= hpet_clockevent.shift + DEFAULT_RTC_SHIFT;
1098 hpet_default_delta = clc;
1099 }
1100
1101 if (!(hpet_rtc_flags & RTC_PIE) || hpet_pie_limit)
1102 delta = hpet_default_delta;
1103 else
1104 delta = hpet_pie_delta;
1105
1106 local_irq_save(flags);
1107
1108 cnt = delta + hpet_readl(HPET_COUNTER);
1109 hpet_writel(cnt, HPET_T1_CMP);
1110 hpet_t1_cmp = cnt;
1111
1112 cfg = hpet_readl(HPET_T1_CFG);
1113 cfg &= ~HPET_TN_PERIODIC;
1114 cfg |= HPET_TN_ENABLE | HPET_TN_32BIT;
1115 hpet_writel(cfg, HPET_T1_CFG);
1116
1117 local_irq_restore(flags);
1118
1119 return 1;
1120}
1121EXPORT_SYMBOL_GPL(hpet_rtc_timer_init);
1122
1123static void hpet_disable_rtc_channel(void)
1124{
1125 u32 cfg = hpet_readl(HPET_T1_CFG);
1126 cfg &= ~HPET_TN_ENABLE;
1127 hpet_writel(cfg, HPET_T1_CFG);
1128}
1129
1130/*
1131 * The functions below are called from rtc driver.
1132 * Return 0 if HPET is not being used.
1133 * Otherwise do the necessary changes and return 1.
1134 */
1135int hpet_mask_rtc_irq_bit(unsigned long bit_mask)
1136{
1137 if (!is_hpet_enabled())
1138 return 0;
1139
1140 hpet_rtc_flags &= ~bit_mask;
1141 if (unlikely(!hpet_rtc_flags))
1142 hpet_disable_rtc_channel();
1143
1144 return 1;
1145}
1146EXPORT_SYMBOL_GPL(hpet_mask_rtc_irq_bit);
1147
1148int hpet_set_rtc_irq_bit(unsigned long bit_mask)
1149{
1150 unsigned long oldbits = hpet_rtc_flags;
1151
1152 if (!is_hpet_enabled())
1153 return 0;
1154
1155 hpet_rtc_flags |= bit_mask;
1156
1157 if ((bit_mask & RTC_UIE) && !(oldbits & RTC_UIE))
1158 hpet_prev_update_sec = -1;
1159
1160 if (!oldbits)
1161 hpet_rtc_timer_init();
1162
1163 return 1;
1164}
1165EXPORT_SYMBOL_GPL(hpet_set_rtc_irq_bit);
1166
1167int hpet_set_alarm_time(unsigned char hrs, unsigned char min,
1168 unsigned char sec)
1169{
1170 if (!is_hpet_enabled())
1171 return 0;
1172
1173 hpet_alarm_time.tm_hour = hrs;
1174 hpet_alarm_time.tm_min = min;
1175 hpet_alarm_time.tm_sec = sec;
1176
1177 return 1;
1178}
1179EXPORT_SYMBOL_GPL(hpet_set_alarm_time);
1180
1181int hpet_set_periodic_freq(unsigned long freq)
1182{
1183 uint64_t clc;
1184
1185 if (!is_hpet_enabled())
1186 return 0;
1187
1188 if (freq <= DEFAULT_RTC_INT_FREQ)
1189 hpet_pie_limit = DEFAULT_RTC_INT_FREQ / freq;
1190 else {
1191 clc = (uint64_t) hpet_clockevent.mult * NSEC_PER_SEC;
1192 do_div(clc, freq);
1193 clc >>= hpet_clockevent.shift;
1194 hpet_pie_delta = clc;
1195 hpet_pie_limit = 0;
1196 }
1197 return 1;
1198}
1199EXPORT_SYMBOL_GPL(hpet_set_periodic_freq);
1200
1201int hpet_rtc_dropped_irq(void)
1202{
1203 return is_hpet_enabled();
1204}
1205EXPORT_SYMBOL_GPL(hpet_rtc_dropped_irq);
1206
1207static void hpet_rtc_timer_reinit(void)
1208{
1209 unsigned int delta;
1210 int lost_ints = -1;
1211
1212 if (unlikely(!hpet_rtc_flags))
1213 hpet_disable_rtc_channel();
1214
1215 if (!(hpet_rtc_flags & RTC_PIE) || hpet_pie_limit)
1216 delta = hpet_default_delta;
1217 else
1218 delta = hpet_pie_delta;
1219
1220 /*
1221 * Increment the comparator value until we are ahead of the
1222 * current count.
1223 */
1224 do {
1225 hpet_t1_cmp += delta;
1226 hpet_writel(hpet_t1_cmp, HPET_T1_CMP);
1227 lost_ints++;
1228 } while (!hpet_cnt_ahead(hpet_t1_cmp, hpet_readl(HPET_COUNTER)));
1229
1230 if (lost_ints) {
1231 if (hpet_rtc_flags & RTC_PIE)
1232 hpet_pie_count += lost_ints;
1233 if (printk_ratelimit())
1234 printk(KERN_WARNING "hpet1: lost %d rtc interrupts\n",
1235 lost_ints);
1236 }
1237}
1238
1239irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id)
1240{
1241 struct rtc_time curr_time;
1242 unsigned long rtc_int_flag = 0;
1243
1244 hpet_rtc_timer_reinit();
1245 memset(&curr_time, 0, sizeof(struct rtc_time));
1246
1247 if (hpet_rtc_flags & (RTC_UIE | RTC_AIE))
1248 get_rtc_time(&curr_time);
1249
1250 if (hpet_rtc_flags & RTC_UIE &&
1251 curr_time.tm_sec != hpet_prev_update_sec) {
1252 if (hpet_prev_update_sec >= 0)
1253 rtc_int_flag = RTC_UF;
1254 hpet_prev_update_sec = curr_time.tm_sec;
1255 }
1256
1257 if (hpet_rtc_flags & RTC_PIE &&
1258 ++hpet_pie_count >= hpet_pie_limit) {
1259 rtc_int_flag |= RTC_PF;
1260 hpet_pie_count = 0;
1261 }
1262
1263 if (hpet_rtc_flags & RTC_AIE &&
1264 (curr_time.tm_sec == hpet_alarm_time.tm_sec) &&
1265 (curr_time.tm_min == hpet_alarm_time.tm_min) &&
1266 (curr_time.tm_hour == hpet_alarm_time.tm_hour))
1267 rtc_int_flag |= RTC_AF;
1268
1269 if (rtc_int_flag) {
1270 rtc_int_flag |= (RTC_IRQF | (RTC_NUM_INTS << 8));
1271 if (irq_handler)
1272 irq_handler(rtc_int_flag, dev_id);
1273 }
1274 return IRQ_HANDLED;
1275}
1276EXPORT_SYMBOL_GPL(hpet_rtc_interrupt);
1277#endif