Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * PCI Express I/O Virtualization (IOV) support
4 * Address Translation Service 1.0
5 * Page Request Interface added by Joerg Roedel <joerg.roedel@amd.com>
6 * PASID support added by Joerg Roedel <joerg.roedel@amd.com>
7 *
8 * Copyright (C) 2009 Intel Corporation, Yu Zhao <yu.zhao@intel.com>
9 * Copyright (C) 2011 Advanced Micro Devices,
10 */
11
12#include <linux/export.h>
13#include <linux/pci-ats.h>
14#include <linux/pci.h>
15#include <linux/slab.h>
16
17#include "pci.h"
18
19void pci_ats_init(struct pci_dev *dev)
20{
21 int pos;
22
23 if (pci_ats_disabled())
24 return;
25
26 pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ATS);
27 if (!pos)
28 return;
29
30 dev->ats_cap = pos;
31}
32
33/**
34 * pci_enable_ats - enable the ATS capability
35 * @dev: the PCI device
36 * @ps: the IOMMU page shift
37 *
38 * Returns 0 on success, or negative on failure.
39 */
40int pci_enable_ats(struct pci_dev *dev, int ps)
41{
42 u16 ctrl;
43 struct pci_dev *pdev;
44
45 if (!dev->ats_cap)
46 return -EINVAL;
47
48 if (WARN_ON(dev->ats_enabled))
49 return -EBUSY;
50
51 if (ps < PCI_ATS_MIN_STU)
52 return -EINVAL;
53
54 /*
55 * Note that enabling ATS on a VF fails unless it's already enabled
56 * with the same STU on the PF.
57 */
58 ctrl = PCI_ATS_CTRL_ENABLE;
59 if (dev->is_virtfn) {
60 pdev = pci_physfn(dev);
61 if (pdev->ats_stu != ps)
62 return -EINVAL;
63
64 atomic_inc(&pdev->ats_ref_cnt); /* count enabled VFs */
65 } else {
66 dev->ats_stu = ps;
67 ctrl |= PCI_ATS_CTRL_STU(dev->ats_stu - PCI_ATS_MIN_STU);
68 }
69 pci_write_config_word(dev, dev->ats_cap + PCI_ATS_CTRL, ctrl);
70
71 dev->ats_enabled = 1;
72 return 0;
73}
74EXPORT_SYMBOL_GPL(pci_enable_ats);
75
76/**
77 * pci_disable_ats - disable the ATS capability
78 * @dev: the PCI device
79 */
80void pci_disable_ats(struct pci_dev *dev)
81{
82 struct pci_dev *pdev;
83 u16 ctrl;
84
85 if (WARN_ON(!dev->ats_enabled))
86 return;
87
88 if (atomic_read(&dev->ats_ref_cnt))
89 return; /* VFs still enabled */
90
91 if (dev->is_virtfn) {
92 pdev = pci_physfn(dev);
93 atomic_dec(&pdev->ats_ref_cnt);
94 }
95
96 pci_read_config_word(dev, dev->ats_cap + PCI_ATS_CTRL, &ctrl);
97 ctrl &= ~PCI_ATS_CTRL_ENABLE;
98 pci_write_config_word(dev, dev->ats_cap + PCI_ATS_CTRL, ctrl);
99
100 dev->ats_enabled = 0;
101}
102EXPORT_SYMBOL_GPL(pci_disable_ats);
103
104void pci_restore_ats_state(struct pci_dev *dev)
105{
106 u16 ctrl;
107
108 if (!dev->ats_enabled)
109 return;
110
111 ctrl = PCI_ATS_CTRL_ENABLE;
112 if (!dev->is_virtfn)
113 ctrl |= PCI_ATS_CTRL_STU(dev->ats_stu - PCI_ATS_MIN_STU);
114 pci_write_config_word(dev, dev->ats_cap + PCI_ATS_CTRL, ctrl);
115}
116EXPORT_SYMBOL_GPL(pci_restore_ats_state);
117
118/**
119 * pci_ats_queue_depth - query the ATS Invalidate Queue Depth
120 * @dev: the PCI device
121 *
122 * Returns the queue depth on success, or negative on failure.
123 *
124 * The ATS spec uses 0 in the Invalidate Queue Depth field to
125 * indicate that the function can accept 32 Invalidate Request.
126 * But here we use the `real' values (i.e. 1~32) for the Queue
127 * Depth; and 0 indicates the function shares the Queue with
128 * other functions (doesn't exclusively own a Queue).
129 */
130int pci_ats_queue_depth(struct pci_dev *dev)
131{
132 u16 cap;
133
134 if (!dev->ats_cap)
135 return -EINVAL;
136
137 if (dev->is_virtfn)
138 return 0;
139
140 pci_read_config_word(dev, dev->ats_cap + PCI_ATS_CAP, &cap);
141 return PCI_ATS_CAP_QDEP(cap) ? PCI_ATS_CAP_QDEP(cap) : PCI_ATS_MAX_QDEP;
142}
143EXPORT_SYMBOL_GPL(pci_ats_queue_depth);
144
145/**
146 * pci_ats_page_aligned - Return Page Aligned Request bit status.
147 * @pdev: the PCI device
148 *
149 * Returns 1, if the Untranslated Addresses generated by the device
150 * are always aligned or 0 otherwise.
151 *
152 * Per PCIe spec r4.0, sec 10.5.1.2, if the Page Aligned Request bit
153 * is set, it indicates the Untranslated Addresses generated by the
154 * device are always aligned to a 4096 byte boundary.
155 */
156int pci_ats_page_aligned(struct pci_dev *pdev)
157{
158 u16 cap;
159
160 if (!pdev->ats_cap)
161 return 0;
162
163 pci_read_config_word(pdev, pdev->ats_cap + PCI_ATS_CAP, &cap);
164
165 if (cap & PCI_ATS_CAP_PAGE_ALIGNED)
166 return 1;
167
168 return 0;
169}
170EXPORT_SYMBOL_GPL(pci_ats_page_aligned);
171
172#ifdef CONFIG_PCI_PRI
173/**
174 * pci_enable_pri - Enable PRI capability
175 * @ pdev: PCI device structure
176 *
177 * Returns 0 on success, negative value on error
178 */
179int pci_enable_pri(struct pci_dev *pdev, u32 reqs)
180{
181 u16 control, status;
182 u32 max_requests;
183 int pos;
184
185 if (WARN_ON(pdev->pri_enabled))
186 return -EBUSY;
187
188 pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI);
189 if (!pos)
190 return -EINVAL;
191
192 pci_read_config_word(pdev, pos + PCI_PRI_STATUS, &status);
193 if (!(status & PCI_PRI_STATUS_STOPPED))
194 return -EBUSY;
195
196 pci_read_config_dword(pdev, pos + PCI_PRI_MAX_REQ, &max_requests);
197 reqs = min(max_requests, reqs);
198 pdev->pri_reqs_alloc = reqs;
199 pci_write_config_dword(pdev, pos + PCI_PRI_ALLOC_REQ, reqs);
200
201 control = PCI_PRI_CTRL_ENABLE;
202 pci_write_config_word(pdev, pos + PCI_PRI_CTRL, control);
203
204 pdev->pri_enabled = 1;
205
206 return 0;
207}
208EXPORT_SYMBOL_GPL(pci_enable_pri);
209
210/**
211 * pci_disable_pri - Disable PRI capability
212 * @pdev: PCI device structure
213 *
214 * Only clears the enabled-bit, regardless of its former value
215 */
216void pci_disable_pri(struct pci_dev *pdev)
217{
218 u16 control;
219 int pos;
220
221 if (WARN_ON(!pdev->pri_enabled))
222 return;
223
224 pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI);
225 if (!pos)
226 return;
227
228 pci_read_config_word(pdev, pos + PCI_PRI_CTRL, &control);
229 control &= ~PCI_PRI_CTRL_ENABLE;
230 pci_write_config_word(pdev, pos + PCI_PRI_CTRL, control);
231
232 pdev->pri_enabled = 0;
233}
234EXPORT_SYMBOL_GPL(pci_disable_pri);
235
236/**
237 * pci_restore_pri_state - Restore PRI
238 * @pdev: PCI device structure
239 */
240void pci_restore_pri_state(struct pci_dev *pdev)
241{
242 u16 control = PCI_PRI_CTRL_ENABLE;
243 u32 reqs = pdev->pri_reqs_alloc;
244 int pos;
245
246 if (!pdev->pri_enabled)
247 return;
248
249 pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI);
250 if (!pos)
251 return;
252
253 pci_write_config_dword(pdev, pos + PCI_PRI_ALLOC_REQ, reqs);
254 pci_write_config_word(pdev, pos + PCI_PRI_CTRL, control);
255}
256EXPORT_SYMBOL_GPL(pci_restore_pri_state);
257
258/**
259 * pci_reset_pri - Resets device's PRI state
260 * @pdev: PCI device structure
261 *
262 * The PRI capability must be disabled before this function is called.
263 * Returns 0 on success, negative value on error.
264 */
265int pci_reset_pri(struct pci_dev *pdev)
266{
267 u16 control;
268 int pos;
269
270 if (WARN_ON(pdev->pri_enabled))
271 return -EBUSY;
272
273 pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI);
274 if (!pos)
275 return -EINVAL;
276
277 control = PCI_PRI_CTRL_RESET;
278 pci_write_config_word(pdev, pos + PCI_PRI_CTRL, control);
279
280 return 0;
281}
282EXPORT_SYMBOL_GPL(pci_reset_pri);
283#endif /* CONFIG_PCI_PRI */
284
285#ifdef CONFIG_PCI_PASID
286/**
287 * pci_enable_pasid - Enable the PASID capability
288 * @pdev: PCI device structure
289 * @features: Features to enable
290 *
291 * Returns 0 on success, negative value on error. This function checks
292 * whether the features are actually supported by the device and returns
293 * an error if not.
294 */
295int pci_enable_pasid(struct pci_dev *pdev, int features)
296{
297 u16 control, supported;
298 int pos;
299
300 if (WARN_ON(pdev->pasid_enabled))
301 return -EBUSY;
302
303 if (!pdev->eetlp_prefix_path)
304 return -EINVAL;
305
306 pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PASID);
307 if (!pos)
308 return -EINVAL;
309
310 pci_read_config_word(pdev, pos + PCI_PASID_CAP, &supported);
311 supported &= PCI_PASID_CAP_EXEC | PCI_PASID_CAP_PRIV;
312
313 /* User wants to enable anything unsupported? */
314 if ((supported & features) != features)
315 return -EINVAL;
316
317 control = PCI_PASID_CTRL_ENABLE | features;
318 pdev->pasid_features = features;
319
320 pci_write_config_word(pdev, pos + PCI_PASID_CTRL, control);
321
322 pdev->pasid_enabled = 1;
323
324 return 0;
325}
326EXPORT_SYMBOL_GPL(pci_enable_pasid);
327
328/**
329 * pci_disable_pasid - Disable the PASID capability
330 * @pdev: PCI device structure
331 */
332void pci_disable_pasid(struct pci_dev *pdev)
333{
334 u16 control = 0;
335 int pos;
336
337 if (WARN_ON(!pdev->pasid_enabled))
338 return;
339
340 pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PASID);
341 if (!pos)
342 return;
343
344 pci_write_config_word(pdev, pos + PCI_PASID_CTRL, control);
345
346 pdev->pasid_enabled = 0;
347}
348EXPORT_SYMBOL_GPL(pci_disable_pasid);
349
350/**
351 * pci_restore_pasid_state - Restore PASID capabilities
352 * @pdev: PCI device structure
353 */
354void pci_restore_pasid_state(struct pci_dev *pdev)
355{
356 u16 control;
357 int pos;
358
359 if (!pdev->pasid_enabled)
360 return;
361
362 pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PASID);
363 if (!pos)
364 return;
365
366 control = PCI_PASID_CTRL_ENABLE | pdev->pasid_features;
367 pci_write_config_word(pdev, pos + PCI_PASID_CTRL, control);
368}
369EXPORT_SYMBOL_GPL(pci_restore_pasid_state);
370
371/**
372 * pci_pasid_features - Check which PASID features are supported
373 * @pdev: PCI device structure
374 *
375 * Returns a negative value when no PASI capability is present.
376 * Otherwise is returns a bitmask with supported features. Current
377 * features reported are:
378 * PCI_PASID_CAP_EXEC - Execute permission supported
379 * PCI_PASID_CAP_PRIV - Privileged mode supported
380 */
381int pci_pasid_features(struct pci_dev *pdev)
382{
383 u16 supported;
384 int pos;
385
386 pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PASID);
387 if (!pos)
388 return -EINVAL;
389
390 pci_read_config_word(pdev, pos + PCI_PASID_CAP, &supported);
391
392 supported &= PCI_PASID_CAP_EXEC | PCI_PASID_CAP_PRIV;
393
394 return supported;
395}
396EXPORT_SYMBOL_GPL(pci_pasid_features);
397
398/**
399 * pci_prg_resp_pasid_required - Return PRG Response PASID Required bit
400 * status.
401 * @pdev: PCI device structure
402 *
403 * Returns 1 if PASID is required in PRG Response Message, 0 otherwise.
404 *
405 * Even though the PRG response PASID status is read from PRI Status
406 * Register, since this API will mainly be used by PASID users, this
407 * function is defined within #ifdef CONFIG_PCI_PASID instead of
408 * CONFIG_PCI_PRI.
409 */
410int pci_prg_resp_pasid_required(struct pci_dev *pdev)
411{
412 u16 status;
413 int pos;
414
415 pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI);
416 if (!pos)
417 return 0;
418
419 pci_read_config_word(pdev, pos + PCI_PRI_STATUS, &status);
420
421 if (status & PCI_PRI_STATUS_PASID)
422 return 1;
423
424 return 0;
425}
426EXPORT_SYMBOL_GPL(pci_prg_resp_pasid_required);
427
428#define PASID_NUMBER_SHIFT 8
429#define PASID_NUMBER_MASK (0x1f << PASID_NUMBER_SHIFT)
430/**
431 * pci_max_pasid - Get maximum number of PASIDs supported by device
432 * @pdev: PCI device structure
433 *
434 * Returns negative value when PASID capability is not present.
435 * Otherwise it returns the number of supported PASIDs.
436 */
437int pci_max_pasids(struct pci_dev *pdev)
438{
439 u16 supported;
440 int pos;
441
442 pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PASID);
443 if (!pos)
444 return -EINVAL;
445
446 pci_read_config_word(pdev, pos + PCI_PASID_CAP, &supported);
447
448 supported = (supported & PASID_NUMBER_MASK) >> PASID_NUMBER_SHIFT;
449
450 return (1 << supported);
451}
452EXPORT_SYMBOL_GPL(pci_max_pasids);
453#endif /* CONFIG_PCI_PASID */
1/*
2 * drivers/pci/ats.c
3 *
4 * Copyright (C) 2009 Intel Corporation, Yu Zhao <yu.zhao@intel.com>
5 * Copyright (C) 2011 Advanced Micro Devices,
6 *
7 * PCI Express I/O Virtualization (IOV) support.
8 * Address Translation Service 1.0
9 * Page Request Interface added by Joerg Roedel <joerg.roedel@amd.com>
10 * PASID support added by Joerg Roedel <joerg.roedel@amd.com>
11 */
12
13#include <linux/export.h>
14#include <linux/pci-ats.h>
15#include <linux/pci.h>
16#include <linux/slab.h>
17
18#include "pci.h"
19
20void pci_ats_init(struct pci_dev *dev)
21{
22 int pos;
23
24 pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ATS);
25 if (!pos)
26 return;
27
28 dev->ats_cap = pos;
29}
30
31/**
32 * pci_enable_ats - enable the ATS capability
33 * @dev: the PCI device
34 * @ps: the IOMMU page shift
35 *
36 * Returns 0 on success, or negative on failure.
37 */
38int pci_enable_ats(struct pci_dev *dev, int ps)
39{
40 u16 ctrl;
41 struct pci_dev *pdev;
42
43 if (!dev->ats_cap)
44 return -EINVAL;
45
46 if (WARN_ON(dev->ats_enabled))
47 return -EBUSY;
48
49 if (ps < PCI_ATS_MIN_STU)
50 return -EINVAL;
51
52 /*
53 * Note that enabling ATS on a VF fails unless it's already enabled
54 * with the same STU on the PF.
55 */
56 ctrl = PCI_ATS_CTRL_ENABLE;
57 if (dev->is_virtfn) {
58 pdev = pci_physfn(dev);
59 if (pdev->ats_stu != ps)
60 return -EINVAL;
61
62 atomic_inc(&pdev->ats_ref_cnt); /* count enabled VFs */
63 } else {
64 dev->ats_stu = ps;
65 ctrl |= PCI_ATS_CTRL_STU(dev->ats_stu - PCI_ATS_MIN_STU);
66 }
67 pci_write_config_word(dev, dev->ats_cap + PCI_ATS_CTRL, ctrl);
68
69 dev->ats_enabled = 1;
70 return 0;
71}
72EXPORT_SYMBOL_GPL(pci_enable_ats);
73
74/**
75 * pci_disable_ats - disable the ATS capability
76 * @dev: the PCI device
77 */
78void pci_disable_ats(struct pci_dev *dev)
79{
80 struct pci_dev *pdev;
81 u16 ctrl;
82
83 if (WARN_ON(!dev->ats_enabled))
84 return;
85
86 if (atomic_read(&dev->ats_ref_cnt))
87 return; /* VFs still enabled */
88
89 if (dev->is_virtfn) {
90 pdev = pci_physfn(dev);
91 atomic_dec(&pdev->ats_ref_cnt);
92 }
93
94 pci_read_config_word(dev, dev->ats_cap + PCI_ATS_CTRL, &ctrl);
95 ctrl &= ~PCI_ATS_CTRL_ENABLE;
96 pci_write_config_word(dev, dev->ats_cap + PCI_ATS_CTRL, ctrl);
97
98 dev->ats_enabled = 0;
99}
100EXPORT_SYMBOL_GPL(pci_disable_ats);
101
102void pci_restore_ats_state(struct pci_dev *dev)
103{
104 u16 ctrl;
105
106 if (!dev->ats_enabled)
107 return;
108
109 ctrl = PCI_ATS_CTRL_ENABLE;
110 if (!dev->is_virtfn)
111 ctrl |= PCI_ATS_CTRL_STU(dev->ats_stu - PCI_ATS_MIN_STU);
112 pci_write_config_word(dev, dev->ats_cap + PCI_ATS_CTRL, ctrl);
113}
114EXPORT_SYMBOL_GPL(pci_restore_ats_state);
115
116/**
117 * pci_ats_queue_depth - query the ATS Invalidate Queue Depth
118 * @dev: the PCI device
119 *
120 * Returns the queue depth on success, or negative on failure.
121 *
122 * The ATS spec uses 0 in the Invalidate Queue Depth field to
123 * indicate that the function can accept 32 Invalidate Request.
124 * But here we use the `real' values (i.e. 1~32) for the Queue
125 * Depth; and 0 indicates the function shares the Queue with
126 * other functions (doesn't exclusively own a Queue).
127 */
128int pci_ats_queue_depth(struct pci_dev *dev)
129{
130 u16 cap;
131
132 if (!dev->ats_cap)
133 return -EINVAL;
134
135 if (dev->is_virtfn)
136 return 0;
137
138 pci_read_config_word(dev, dev->ats_cap + PCI_ATS_CAP, &cap);
139 return PCI_ATS_CAP_QDEP(cap) ? PCI_ATS_CAP_QDEP(cap) : PCI_ATS_MAX_QDEP;
140}
141EXPORT_SYMBOL_GPL(pci_ats_queue_depth);
142
143#ifdef CONFIG_PCI_PRI
144/**
145 * pci_enable_pri - Enable PRI capability
146 * @ pdev: PCI device structure
147 *
148 * Returns 0 on success, negative value on error
149 */
150int pci_enable_pri(struct pci_dev *pdev, u32 reqs)
151{
152 u16 control, status;
153 u32 max_requests;
154 int pos;
155
156 pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI);
157 if (!pos)
158 return -EINVAL;
159
160 pci_read_config_word(pdev, pos + PCI_PRI_CTRL, &control);
161 pci_read_config_word(pdev, pos + PCI_PRI_STATUS, &status);
162 if ((control & PCI_PRI_CTRL_ENABLE) ||
163 !(status & PCI_PRI_STATUS_STOPPED))
164 return -EBUSY;
165
166 pci_read_config_dword(pdev, pos + PCI_PRI_MAX_REQ, &max_requests);
167 reqs = min(max_requests, reqs);
168 pci_write_config_dword(pdev, pos + PCI_PRI_ALLOC_REQ, reqs);
169
170 control |= PCI_PRI_CTRL_ENABLE;
171 pci_write_config_word(pdev, pos + PCI_PRI_CTRL, control);
172
173 return 0;
174}
175EXPORT_SYMBOL_GPL(pci_enable_pri);
176
177/**
178 * pci_disable_pri - Disable PRI capability
179 * @pdev: PCI device structure
180 *
181 * Only clears the enabled-bit, regardless of its former value
182 */
183void pci_disable_pri(struct pci_dev *pdev)
184{
185 u16 control;
186 int pos;
187
188 pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI);
189 if (!pos)
190 return;
191
192 pci_read_config_word(pdev, pos + PCI_PRI_CTRL, &control);
193 control &= ~PCI_PRI_CTRL_ENABLE;
194 pci_write_config_word(pdev, pos + PCI_PRI_CTRL, control);
195}
196EXPORT_SYMBOL_GPL(pci_disable_pri);
197
198/**
199 * pci_reset_pri - Resets device's PRI state
200 * @pdev: PCI device structure
201 *
202 * The PRI capability must be disabled before this function is called.
203 * Returns 0 on success, negative value on error.
204 */
205int pci_reset_pri(struct pci_dev *pdev)
206{
207 u16 control;
208 int pos;
209
210 pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI);
211 if (!pos)
212 return -EINVAL;
213
214 pci_read_config_word(pdev, pos + PCI_PRI_CTRL, &control);
215 if (control & PCI_PRI_CTRL_ENABLE)
216 return -EBUSY;
217
218 control |= PCI_PRI_CTRL_RESET;
219
220 pci_write_config_word(pdev, pos + PCI_PRI_CTRL, control);
221
222 return 0;
223}
224EXPORT_SYMBOL_GPL(pci_reset_pri);
225#endif /* CONFIG_PCI_PRI */
226
227#ifdef CONFIG_PCI_PASID
228/**
229 * pci_enable_pasid - Enable the PASID capability
230 * @pdev: PCI device structure
231 * @features: Features to enable
232 *
233 * Returns 0 on success, negative value on error. This function checks
234 * whether the features are actually supported by the device and returns
235 * an error if not.
236 */
237int pci_enable_pasid(struct pci_dev *pdev, int features)
238{
239 u16 control, supported;
240 int pos;
241
242 pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PASID);
243 if (!pos)
244 return -EINVAL;
245
246 pci_read_config_word(pdev, pos + PCI_PASID_CTRL, &control);
247 pci_read_config_word(pdev, pos + PCI_PASID_CAP, &supported);
248
249 if (control & PCI_PASID_CTRL_ENABLE)
250 return -EINVAL;
251
252 supported &= PCI_PASID_CAP_EXEC | PCI_PASID_CAP_PRIV;
253
254 /* User wants to enable anything unsupported? */
255 if ((supported & features) != features)
256 return -EINVAL;
257
258 control = PCI_PASID_CTRL_ENABLE | features;
259
260 pci_write_config_word(pdev, pos + PCI_PASID_CTRL, control);
261
262 return 0;
263}
264EXPORT_SYMBOL_GPL(pci_enable_pasid);
265
266/**
267 * pci_disable_pasid - Disable the PASID capability
268 * @pdev: PCI device structure
269 *
270 */
271void pci_disable_pasid(struct pci_dev *pdev)
272{
273 u16 control = 0;
274 int pos;
275
276 pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PASID);
277 if (!pos)
278 return;
279
280 pci_write_config_word(pdev, pos + PCI_PASID_CTRL, control);
281}
282EXPORT_SYMBOL_GPL(pci_disable_pasid);
283
284/**
285 * pci_pasid_features - Check which PASID features are supported
286 * @pdev: PCI device structure
287 *
288 * Returns a negative value when no PASI capability is present.
289 * Otherwise is returns a bitmask with supported features. Current
290 * features reported are:
291 * PCI_PASID_CAP_EXEC - Execute permission supported
292 * PCI_PASID_CAP_PRIV - Privileged mode supported
293 */
294int pci_pasid_features(struct pci_dev *pdev)
295{
296 u16 supported;
297 int pos;
298
299 pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PASID);
300 if (!pos)
301 return -EINVAL;
302
303 pci_read_config_word(pdev, pos + PCI_PASID_CAP, &supported);
304
305 supported &= PCI_PASID_CAP_EXEC | PCI_PASID_CAP_PRIV;
306
307 return supported;
308}
309EXPORT_SYMBOL_GPL(pci_pasid_features);
310
311#define PASID_NUMBER_SHIFT 8
312#define PASID_NUMBER_MASK (0x1f << PASID_NUMBER_SHIFT)
313/**
314 * pci_max_pasid - Get maximum number of PASIDs supported by device
315 * @pdev: PCI device structure
316 *
317 * Returns negative value when PASID capability is not present.
318 * Otherwise it returns the numer of supported PASIDs.
319 */
320int pci_max_pasids(struct pci_dev *pdev)
321{
322 u16 supported;
323 int pos;
324
325 pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PASID);
326 if (!pos)
327 return -EINVAL;
328
329 pci_read_config_word(pdev, pos + PCI_PASID_CAP, &supported);
330
331 supported = (supported & PASID_NUMBER_MASK) >> PASID_NUMBER_SHIFT;
332
333 return (1 << supported);
334}
335EXPORT_SYMBOL_GPL(pci_max_pasids);
336#endif /* CONFIG_PCI_PASID */