Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2// SPI init/core code
3//
4// Copyright (C) 2005 David Brownell
5// Copyright (C) 2008 Secret Lab Technologies Ltd.
6
7#include <linux/kernel.h>
8#include <linux/device.h>
9#include <linux/init.h>
10#include <linux/cache.h>
11#include <linux/dma-mapping.h>
12#include <linux/dmaengine.h>
13#include <linux/mutex.h>
14#include <linux/of_device.h>
15#include <linux/of_irq.h>
16#include <linux/clk/clk-conf.h>
17#include <linux/slab.h>
18#include <linux/mod_devicetable.h>
19#include <linux/spi/spi.h>
20#include <linux/spi/spi-mem.h>
21#include <linux/of_gpio.h>
22#include <linux/gpio/consumer.h>
23#include <linux/pm_runtime.h>
24#include <linux/pm_domain.h>
25#include <linux/property.h>
26#include <linux/export.h>
27#include <linux/sched/rt.h>
28#include <uapi/linux/sched/types.h>
29#include <linux/delay.h>
30#include <linux/kthread.h>
31#include <linux/ioport.h>
32#include <linux/acpi.h>
33#include <linux/highmem.h>
34#include <linux/idr.h>
35#include <linux/platform_data/x86/apple.h>
36
37#define CREATE_TRACE_POINTS
38#include <trace/events/spi.h>
39EXPORT_TRACEPOINT_SYMBOL(spi_transfer_start);
40EXPORT_TRACEPOINT_SYMBOL(spi_transfer_stop);
41
42#include "internals.h"
43
44static DEFINE_IDR(spi_master_idr);
45
46static void spidev_release(struct device *dev)
47{
48 struct spi_device *spi = to_spi_device(dev);
49
50 /* spi controllers may cleanup for released devices */
51 if (spi->controller->cleanup)
52 spi->controller->cleanup(spi);
53
54 spi_controller_put(spi->controller);
55 kfree(spi->driver_override);
56 kfree(spi);
57}
58
59static ssize_t
60modalias_show(struct device *dev, struct device_attribute *a, char *buf)
61{
62 const struct spi_device *spi = to_spi_device(dev);
63 int len;
64
65 len = acpi_device_modalias(dev, buf, PAGE_SIZE - 1);
66 if (len != -ENODEV)
67 return len;
68
69 return sprintf(buf, "%s%s\n", SPI_MODULE_PREFIX, spi->modalias);
70}
71static DEVICE_ATTR_RO(modalias);
72
73static ssize_t driver_override_store(struct device *dev,
74 struct device_attribute *a,
75 const char *buf, size_t count)
76{
77 struct spi_device *spi = to_spi_device(dev);
78 const char *end = memchr(buf, '\n', count);
79 const size_t len = end ? end - buf : count;
80 const char *driver_override, *old;
81
82 /* We need to keep extra room for a newline when displaying value */
83 if (len >= (PAGE_SIZE - 1))
84 return -EINVAL;
85
86 driver_override = kstrndup(buf, len, GFP_KERNEL);
87 if (!driver_override)
88 return -ENOMEM;
89
90 device_lock(dev);
91 old = spi->driver_override;
92 if (len) {
93 spi->driver_override = driver_override;
94 } else {
95 /* Emptry string, disable driver override */
96 spi->driver_override = NULL;
97 kfree(driver_override);
98 }
99 device_unlock(dev);
100 kfree(old);
101
102 return count;
103}
104
105static ssize_t driver_override_show(struct device *dev,
106 struct device_attribute *a, char *buf)
107{
108 const struct spi_device *spi = to_spi_device(dev);
109 ssize_t len;
110
111 device_lock(dev);
112 len = snprintf(buf, PAGE_SIZE, "%s\n", spi->driver_override ? : "");
113 device_unlock(dev);
114 return len;
115}
116static DEVICE_ATTR_RW(driver_override);
117
118#define SPI_STATISTICS_ATTRS(field, file) \
119static ssize_t spi_controller_##field##_show(struct device *dev, \
120 struct device_attribute *attr, \
121 char *buf) \
122{ \
123 struct spi_controller *ctlr = container_of(dev, \
124 struct spi_controller, dev); \
125 return spi_statistics_##field##_show(&ctlr->statistics, buf); \
126} \
127static struct device_attribute dev_attr_spi_controller_##field = { \
128 .attr = { .name = file, .mode = 0444 }, \
129 .show = spi_controller_##field##_show, \
130}; \
131static ssize_t spi_device_##field##_show(struct device *dev, \
132 struct device_attribute *attr, \
133 char *buf) \
134{ \
135 struct spi_device *spi = to_spi_device(dev); \
136 return spi_statistics_##field##_show(&spi->statistics, buf); \
137} \
138static struct device_attribute dev_attr_spi_device_##field = { \
139 .attr = { .name = file, .mode = 0444 }, \
140 .show = spi_device_##field##_show, \
141}
142
143#define SPI_STATISTICS_SHOW_NAME(name, file, field, format_string) \
144static ssize_t spi_statistics_##name##_show(struct spi_statistics *stat, \
145 char *buf) \
146{ \
147 unsigned long flags; \
148 ssize_t len; \
149 spin_lock_irqsave(&stat->lock, flags); \
150 len = sprintf(buf, format_string, stat->field); \
151 spin_unlock_irqrestore(&stat->lock, flags); \
152 return len; \
153} \
154SPI_STATISTICS_ATTRS(name, file)
155
156#define SPI_STATISTICS_SHOW(field, format_string) \
157 SPI_STATISTICS_SHOW_NAME(field, __stringify(field), \
158 field, format_string)
159
160SPI_STATISTICS_SHOW(messages, "%lu");
161SPI_STATISTICS_SHOW(transfers, "%lu");
162SPI_STATISTICS_SHOW(errors, "%lu");
163SPI_STATISTICS_SHOW(timedout, "%lu");
164
165SPI_STATISTICS_SHOW(spi_sync, "%lu");
166SPI_STATISTICS_SHOW(spi_sync_immediate, "%lu");
167SPI_STATISTICS_SHOW(spi_async, "%lu");
168
169SPI_STATISTICS_SHOW(bytes, "%llu");
170SPI_STATISTICS_SHOW(bytes_rx, "%llu");
171SPI_STATISTICS_SHOW(bytes_tx, "%llu");
172
173#define SPI_STATISTICS_TRANSFER_BYTES_HISTO(index, number) \
174 SPI_STATISTICS_SHOW_NAME(transfer_bytes_histo##index, \
175 "transfer_bytes_histo_" number, \
176 transfer_bytes_histo[index], "%lu")
177SPI_STATISTICS_TRANSFER_BYTES_HISTO(0, "0-1");
178SPI_STATISTICS_TRANSFER_BYTES_HISTO(1, "2-3");
179SPI_STATISTICS_TRANSFER_BYTES_HISTO(2, "4-7");
180SPI_STATISTICS_TRANSFER_BYTES_HISTO(3, "8-15");
181SPI_STATISTICS_TRANSFER_BYTES_HISTO(4, "16-31");
182SPI_STATISTICS_TRANSFER_BYTES_HISTO(5, "32-63");
183SPI_STATISTICS_TRANSFER_BYTES_HISTO(6, "64-127");
184SPI_STATISTICS_TRANSFER_BYTES_HISTO(7, "128-255");
185SPI_STATISTICS_TRANSFER_BYTES_HISTO(8, "256-511");
186SPI_STATISTICS_TRANSFER_BYTES_HISTO(9, "512-1023");
187SPI_STATISTICS_TRANSFER_BYTES_HISTO(10, "1024-2047");
188SPI_STATISTICS_TRANSFER_BYTES_HISTO(11, "2048-4095");
189SPI_STATISTICS_TRANSFER_BYTES_HISTO(12, "4096-8191");
190SPI_STATISTICS_TRANSFER_BYTES_HISTO(13, "8192-16383");
191SPI_STATISTICS_TRANSFER_BYTES_HISTO(14, "16384-32767");
192SPI_STATISTICS_TRANSFER_BYTES_HISTO(15, "32768-65535");
193SPI_STATISTICS_TRANSFER_BYTES_HISTO(16, "65536+");
194
195SPI_STATISTICS_SHOW(transfers_split_maxsize, "%lu");
196
197static struct attribute *spi_dev_attrs[] = {
198 &dev_attr_modalias.attr,
199 &dev_attr_driver_override.attr,
200 NULL,
201};
202
203static const struct attribute_group spi_dev_group = {
204 .attrs = spi_dev_attrs,
205};
206
207static struct attribute *spi_device_statistics_attrs[] = {
208 &dev_attr_spi_device_messages.attr,
209 &dev_attr_spi_device_transfers.attr,
210 &dev_attr_spi_device_errors.attr,
211 &dev_attr_spi_device_timedout.attr,
212 &dev_attr_spi_device_spi_sync.attr,
213 &dev_attr_spi_device_spi_sync_immediate.attr,
214 &dev_attr_spi_device_spi_async.attr,
215 &dev_attr_spi_device_bytes.attr,
216 &dev_attr_spi_device_bytes_rx.attr,
217 &dev_attr_spi_device_bytes_tx.attr,
218 &dev_attr_spi_device_transfer_bytes_histo0.attr,
219 &dev_attr_spi_device_transfer_bytes_histo1.attr,
220 &dev_attr_spi_device_transfer_bytes_histo2.attr,
221 &dev_attr_spi_device_transfer_bytes_histo3.attr,
222 &dev_attr_spi_device_transfer_bytes_histo4.attr,
223 &dev_attr_spi_device_transfer_bytes_histo5.attr,
224 &dev_attr_spi_device_transfer_bytes_histo6.attr,
225 &dev_attr_spi_device_transfer_bytes_histo7.attr,
226 &dev_attr_spi_device_transfer_bytes_histo8.attr,
227 &dev_attr_spi_device_transfer_bytes_histo9.attr,
228 &dev_attr_spi_device_transfer_bytes_histo10.attr,
229 &dev_attr_spi_device_transfer_bytes_histo11.attr,
230 &dev_attr_spi_device_transfer_bytes_histo12.attr,
231 &dev_attr_spi_device_transfer_bytes_histo13.attr,
232 &dev_attr_spi_device_transfer_bytes_histo14.attr,
233 &dev_attr_spi_device_transfer_bytes_histo15.attr,
234 &dev_attr_spi_device_transfer_bytes_histo16.attr,
235 &dev_attr_spi_device_transfers_split_maxsize.attr,
236 NULL,
237};
238
239static const struct attribute_group spi_device_statistics_group = {
240 .name = "statistics",
241 .attrs = spi_device_statistics_attrs,
242};
243
244static const struct attribute_group *spi_dev_groups[] = {
245 &spi_dev_group,
246 &spi_device_statistics_group,
247 NULL,
248};
249
250static struct attribute *spi_controller_statistics_attrs[] = {
251 &dev_attr_spi_controller_messages.attr,
252 &dev_attr_spi_controller_transfers.attr,
253 &dev_attr_spi_controller_errors.attr,
254 &dev_attr_spi_controller_timedout.attr,
255 &dev_attr_spi_controller_spi_sync.attr,
256 &dev_attr_spi_controller_spi_sync_immediate.attr,
257 &dev_attr_spi_controller_spi_async.attr,
258 &dev_attr_spi_controller_bytes.attr,
259 &dev_attr_spi_controller_bytes_rx.attr,
260 &dev_attr_spi_controller_bytes_tx.attr,
261 &dev_attr_spi_controller_transfer_bytes_histo0.attr,
262 &dev_attr_spi_controller_transfer_bytes_histo1.attr,
263 &dev_attr_spi_controller_transfer_bytes_histo2.attr,
264 &dev_attr_spi_controller_transfer_bytes_histo3.attr,
265 &dev_attr_spi_controller_transfer_bytes_histo4.attr,
266 &dev_attr_spi_controller_transfer_bytes_histo5.attr,
267 &dev_attr_spi_controller_transfer_bytes_histo6.attr,
268 &dev_attr_spi_controller_transfer_bytes_histo7.attr,
269 &dev_attr_spi_controller_transfer_bytes_histo8.attr,
270 &dev_attr_spi_controller_transfer_bytes_histo9.attr,
271 &dev_attr_spi_controller_transfer_bytes_histo10.attr,
272 &dev_attr_spi_controller_transfer_bytes_histo11.attr,
273 &dev_attr_spi_controller_transfer_bytes_histo12.attr,
274 &dev_attr_spi_controller_transfer_bytes_histo13.attr,
275 &dev_attr_spi_controller_transfer_bytes_histo14.attr,
276 &dev_attr_spi_controller_transfer_bytes_histo15.attr,
277 &dev_attr_spi_controller_transfer_bytes_histo16.attr,
278 &dev_attr_spi_controller_transfers_split_maxsize.attr,
279 NULL,
280};
281
282static const struct attribute_group spi_controller_statistics_group = {
283 .name = "statistics",
284 .attrs = spi_controller_statistics_attrs,
285};
286
287static const struct attribute_group *spi_master_groups[] = {
288 &spi_controller_statistics_group,
289 NULL,
290};
291
292void spi_statistics_add_transfer_stats(struct spi_statistics *stats,
293 struct spi_transfer *xfer,
294 struct spi_controller *ctlr)
295{
296 unsigned long flags;
297 int l2len = min(fls(xfer->len), SPI_STATISTICS_HISTO_SIZE) - 1;
298
299 if (l2len < 0)
300 l2len = 0;
301
302 spin_lock_irqsave(&stats->lock, flags);
303
304 stats->transfers++;
305 stats->transfer_bytes_histo[l2len]++;
306
307 stats->bytes += xfer->len;
308 if ((xfer->tx_buf) &&
309 (xfer->tx_buf != ctlr->dummy_tx))
310 stats->bytes_tx += xfer->len;
311 if ((xfer->rx_buf) &&
312 (xfer->rx_buf != ctlr->dummy_rx))
313 stats->bytes_rx += xfer->len;
314
315 spin_unlock_irqrestore(&stats->lock, flags);
316}
317EXPORT_SYMBOL_GPL(spi_statistics_add_transfer_stats);
318
319/* modalias support makes "modprobe $MODALIAS" new-style hotplug work,
320 * and the sysfs version makes coldplug work too.
321 */
322
323static const struct spi_device_id *spi_match_id(const struct spi_device_id *id,
324 const struct spi_device *sdev)
325{
326 while (id->name[0]) {
327 if (!strcmp(sdev->modalias, id->name))
328 return id;
329 id++;
330 }
331 return NULL;
332}
333
334const struct spi_device_id *spi_get_device_id(const struct spi_device *sdev)
335{
336 const struct spi_driver *sdrv = to_spi_driver(sdev->dev.driver);
337
338 return spi_match_id(sdrv->id_table, sdev);
339}
340EXPORT_SYMBOL_GPL(spi_get_device_id);
341
342static int spi_match_device(struct device *dev, struct device_driver *drv)
343{
344 const struct spi_device *spi = to_spi_device(dev);
345 const struct spi_driver *sdrv = to_spi_driver(drv);
346
347 /* Check override first, and if set, only use the named driver */
348 if (spi->driver_override)
349 return strcmp(spi->driver_override, drv->name) == 0;
350
351 /* Attempt an OF style match */
352 if (of_driver_match_device(dev, drv))
353 return 1;
354
355 /* Then try ACPI */
356 if (acpi_driver_match_device(dev, drv))
357 return 1;
358
359 if (sdrv->id_table)
360 return !!spi_match_id(sdrv->id_table, spi);
361
362 return strcmp(spi->modalias, drv->name) == 0;
363}
364
365static int spi_uevent(struct device *dev, struct kobj_uevent_env *env)
366{
367 const struct spi_device *spi = to_spi_device(dev);
368 int rc;
369
370 rc = acpi_device_uevent_modalias(dev, env);
371 if (rc != -ENODEV)
372 return rc;
373
374 return add_uevent_var(env, "MODALIAS=%s%s", SPI_MODULE_PREFIX, spi->modalias);
375}
376
377struct bus_type spi_bus_type = {
378 .name = "spi",
379 .dev_groups = spi_dev_groups,
380 .match = spi_match_device,
381 .uevent = spi_uevent,
382};
383EXPORT_SYMBOL_GPL(spi_bus_type);
384
385
386static int spi_drv_probe(struct device *dev)
387{
388 const struct spi_driver *sdrv = to_spi_driver(dev->driver);
389 struct spi_device *spi = to_spi_device(dev);
390 int ret;
391
392 ret = of_clk_set_defaults(dev->of_node, false);
393 if (ret)
394 return ret;
395
396 if (dev->of_node) {
397 spi->irq = of_irq_get(dev->of_node, 0);
398 if (spi->irq == -EPROBE_DEFER)
399 return -EPROBE_DEFER;
400 if (spi->irq < 0)
401 spi->irq = 0;
402 }
403
404 ret = dev_pm_domain_attach(dev, true);
405 if (ret)
406 return ret;
407
408 ret = sdrv->probe(spi);
409 if (ret)
410 dev_pm_domain_detach(dev, true);
411
412 return ret;
413}
414
415static int spi_drv_remove(struct device *dev)
416{
417 const struct spi_driver *sdrv = to_spi_driver(dev->driver);
418 int ret;
419
420 ret = sdrv->remove(to_spi_device(dev));
421 dev_pm_domain_detach(dev, true);
422
423 return ret;
424}
425
426static void spi_drv_shutdown(struct device *dev)
427{
428 const struct spi_driver *sdrv = to_spi_driver(dev->driver);
429
430 sdrv->shutdown(to_spi_device(dev));
431}
432
433/**
434 * __spi_register_driver - register a SPI driver
435 * @owner: owner module of the driver to register
436 * @sdrv: the driver to register
437 * Context: can sleep
438 *
439 * Return: zero on success, else a negative error code.
440 */
441int __spi_register_driver(struct module *owner, struct spi_driver *sdrv)
442{
443 sdrv->driver.owner = owner;
444 sdrv->driver.bus = &spi_bus_type;
445 if (sdrv->probe)
446 sdrv->driver.probe = spi_drv_probe;
447 if (sdrv->remove)
448 sdrv->driver.remove = spi_drv_remove;
449 if (sdrv->shutdown)
450 sdrv->driver.shutdown = spi_drv_shutdown;
451 return driver_register(&sdrv->driver);
452}
453EXPORT_SYMBOL_GPL(__spi_register_driver);
454
455/*-------------------------------------------------------------------------*/
456
457/* SPI devices should normally not be created by SPI device drivers; that
458 * would make them board-specific. Similarly with SPI controller drivers.
459 * Device registration normally goes into like arch/.../mach.../board-YYY.c
460 * with other readonly (flashable) information about mainboard devices.
461 */
462
463struct boardinfo {
464 struct list_head list;
465 struct spi_board_info board_info;
466};
467
468static LIST_HEAD(board_list);
469static LIST_HEAD(spi_controller_list);
470
471/*
472 * Used to protect add/del opertion for board_info list and
473 * spi_controller list, and their matching process
474 * also used to protect object of type struct idr
475 */
476static DEFINE_MUTEX(board_lock);
477
478/**
479 * spi_alloc_device - Allocate a new SPI device
480 * @ctlr: Controller to which device is connected
481 * Context: can sleep
482 *
483 * Allows a driver to allocate and initialize a spi_device without
484 * registering it immediately. This allows a driver to directly
485 * fill the spi_device with device parameters before calling
486 * spi_add_device() on it.
487 *
488 * Caller is responsible to call spi_add_device() on the returned
489 * spi_device structure to add it to the SPI controller. If the caller
490 * needs to discard the spi_device without adding it, then it should
491 * call spi_dev_put() on it.
492 *
493 * Return: a pointer to the new device, or NULL.
494 */
495struct spi_device *spi_alloc_device(struct spi_controller *ctlr)
496{
497 struct spi_device *spi;
498
499 if (!spi_controller_get(ctlr))
500 return NULL;
501
502 spi = kzalloc(sizeof(*spi), GFP_KERNEL);
503 if (!spi) {
504 spi_controller_put(ctlr);
505 return NULL;
506 }
507
508 spi->master = spi->controller = ctlr;
509 spi->dev.parent = &ctlr->dev;
510 spi->dev.bus = &spi_bus_type;
511 spi->dev.release = spidev_release;
512 spi->cs_gpio = -ENOENT;
513
514 spin_lock_init(&spi->statistics.lock);
515
516 device_initialize(&spi->dev);
517 return spi;
518}
519EXPORT_SYMBOL_GPL(spi_alloc_device);
520
521static void spi_dev_set_name(struct spi_device *spi)
522{
523 struct acpi_device *adev = ACPI_COMPANION(&spi->dev);
524
525 if (adev) {
526 dev_set_name(&spi->dev, "spi-%s", acpi_dev_name(adev));
527 return;
528 }
529
530 dev_set_name(&spi->dev, "%s.%u", dev_name(&spi->controller->dev),
531 spi->chip_select);
532}
533
534static int spi_dev_check(struct device *dev, void *data)
535{
536 struct spi_device *spi = to_spi_device(dev);
537 struct spi_device *new_spi = data;
538
539 if (spi->controller == new_spi->controller &&
540 spi->chip_select == new_spi->chip_select)
541 return -EBUSY;
542 return 0;
543}
544
545/**
546 * spi_add_device - Add spi_device allocated with spi_alloc_device
547 * @spi: spi_device to register
548 *
549 * Companion function to spi_alloc_device. Devices allocated with
550 * spi_alloc_device can be added onto the spi bus with this function.
551 *
552 * Return: 0 on success; negative errno on failure
553 */
554int spi_add_device(struct spi_device *spi)
555{
556 static DEFINE_MUTEX(spi_add_lock);
557 struct spi_controller *ctlr = spi->controller;
558 struct device *dev = ctlr->dev.parent;
559 int status;
560
561 /* Chipselects are numbered 0..max; validate. */
562 if (spi->chip_select >= ctlr->num_chipselect) {
563 dev_err(dev, "cs%d >= max %d\n", spi->chip_select,
564 ctlr->num_chipselect);
565 return -EINVAL;
566 }
567
568 /* Set the bus ID string */
569 spi_dev_set_name(spi);
570
571 /* We need to make sure there's no other device with this
572 * chipselect **BEFORE** we call setup(), else we'll trash
573 * its configuration. Lock against concurrent add() calls.
574 */
575 mutex_lock(&spi_add_lock);
576
577 status = bus_for_each_dev(&spi_bus_type, NULL, spi, spi_dev_check);
578 if (status) {
579 dev_err(dev, "chipselect %d already in use\n",
580 spi->chip_select);
581 goto done;
582 }
583
584 /* Descriptors take precedence */
585 if (ctlr->cs_gpiods)
586 spi->cs_gpiod = ctlr->cs_gpiods[spi->chip_select];
587 else if (ctlr->cs_gpios)
588 spi->cs_gpio = ctlr->cs_gpios[spi->chip_select];
589
590 /* Drivers may modify this initial i/o setup, but will
591 * normally rely on the device being setup. Devices
592 * using SPI_CS_HIGH can't coexist well otherwise...
593 */
594 status = spi_setup(spi);
595 if (status < 0) {
596 dev_err(dev, "can't setup %s, status %d\n",
597 dev_name(&spi->dev), status);
598 goto done;
599 }
600
601 /* Device may be bound to an active driver when this returns */
602 status = device_add(&spi->dev);
603 if (status < 0)
604 dev_err(dev, "can't add %s, status %d\n",
605 dev_name(&spi->dev), status);
606 else
607 dev_dbg(dev, "registered child %s\n", dev_name(&spi->dev));
608
609done:
610 mutex_unlock(&spi_add_lock);
611 return status;
612}
613EXPORT_SYMBOL_GPL(spi_add_device);
614
615/**
616 * spi_new_device - instantiate one new SPI device
617 * @ctlr: Controller to which device is connected
618 * @chip: Describes the SPI device
619 * Context: can sleep
620 *
621 * On typical mainboards, this is purely internal; and it's not needed
622 * after board init creates the hard-wired devices. Some development
623 * platforms may not be able to use spi_register_board_info though, and
624 * this is exported so that for example a USB or parport based adapter
625 * driver could add devices (which it would learn about out-of-band).
626 *
627 * Return: the new device, or NULL.
628 */
629struct spi_device *spi_new_device(struct spi_controller *ctlr,
630 struct spi_board_info *chip)
631{
632 struct spi_device *proxy;
633 int status;
634
635 /* NOTE: caller did any chip->bus_num checks necessary.
636 *
637 * Also, unless we change the return value convention to use
638 * error-or-pointer (not NULL-or-pointer), troubleshootability
639 * suggests syslogged diagnostics are best here (ugh).
640 */
641
642 proxy = spi_alloc_device(ctlr);
643 if (!proxy)
644 return NULL;
645
646 WARN_ON(strlen(chip->modalias) >= sizeof(proxy->modalias));
647
648 proxy->chip_select = chip->chip_select;
649 proxy->max_speed_hz = chip->max_speed_hz;
650 proxy->mode = chip->mode;
651 proxy->irq = chip->irq;
652 strlcpy(proxy->modalias, chip->modalias, sizeof(proxy->modalias));
653 proxy->dev.platform_data = (void *) chip->platform_data;
654 proxy->controller_data = chip->controller_data;
655 proxy->controller_state = NULL;
656
657 if (chip->properties) {
658 status = device_add_properties(&proxy->dev, chip->properties);
659 if (status) {
660 dev_err(&ctlr->dev,
661 "failed to add properties to '%s': %d\n",
662 chip->modalias, status);
663 goto err_dev_put;
664 }
665 }
666
667 status = spi_add_device(proxy);
668 if (status < 0)
669 goto err_remove_props;
670
671 return proxy;
672
673err_remove_props:
674 if (chip->properties)
675 device_remove_properties(&proxy->dev);
676err_dev_put:
677 spi_dev_put(proxy);
678 return NULL;
679}
680EXPORT_SYMBOL_GPL(spi_new_device);
681
682/**
683 * spi_unregister_device - unregister a single SPI device
684 * @spi: spi_device to unregister
685 *
686 * Start making the passed SPI device vanish. Normally this would be handled
687 * by spi_unregister_controller().
688 */
689void spi_unregister_device(struct spi_device *spi)
690{
691 if (!spi)
692 return;
693
694 if (spi->dev.of_node) {
695 of_node_clear_flag(spi->dev.of_node, OF_POPULATED);
696 of_node_put(spi->dev.of_node);
697 }
698 if (ACPI_COMPANION(&spi->dev))
699 acpi_device_clear_enumerated(ACPI_COMPANION(&spi->dev));
700 device_unregister(&spi->dev);
701}
702EXPORT_SYMBOL_GPL(spi_unregister_device);
703
704static void spi_match_controller_to_boardinfo(struct spi_controller *ctlr,
705 struct spi_board_info *bi)
706{
707 struct spi_device *dev;
708
709 if (ctlr->bus_num != bi->bus_num)
710 return;
711
712 dev = spi_new_device(ctlr, bi);
713 if (!dev)
714 dev_err(ctlr->dev.parent, "can't create new device for %s\n",
715 bi->modalias);
716}
717
718/**
719 * spi_register_board_info - register SPI devices for a given board
720 * @info: array of chip descriptors
721 * @n: how many descriptors are provided
722 * Context: can sleep
723 *
724 * Board-specific early init code calls this (probably during arch_initcall)
725 * with segments of the SPI device table. Any device nodes are created later,
726 * after the relevant parent SPI controller (bus_num) is defined. We keep
727 * this table of devices forever, so that reloading a controller driver will
728 * not make Linux forget about these hard-wired devices.
729 *
730 * Other code can also call this, e.g. a particular add-on board might provide
731 * SPI devices through its expansion connector, so code initializing that board
732 * would naturally declare its SPI devices.
733 *
734 * The board info passed can safely be __initdata ... but be careful of
735 * any embedded pointers (platform_data, etc), they're copied as-is.
736 * Device properties are deep-copied though.
737 *
738 * Return: zero on success, else a negative error code.
739 */
740int spi_register_board_info(struct spi_board_info const *info, unsigned n)
741{
742 struct boardinfo *bi;
743 int i;
744
745 if (!n)
746 return 0;
747
748 bi = kcalloc(n, sizeof(*bi), GFP_KERNEL);
749 if (!bi)
750 return -ENOMEM;
751
752 for (i = 0; i < n; i++, bi++, info++) {
753 struct spi_controller *ctlr;
754
755 memcpy(&bi->board_info, info, sizeof(*info));
756 if (info->properties) {
757 bi->board_info.properties =
758 property_entries_dup(info->properties);
759 if (IS_ERR(bi->board_info.properties))
760 return PTR_ERR(bi->board_info.properties);
761 }
762
763 mutex_lock(&board_lock);
764 list_add_tail(&bi->list, &board_list);
765 list_for_each_entry(ctlr, &spi_controller_list, list)
766 spi_match_controller_to_boardinfo(ctlr,
767 &bi->board_info);
768 mutex_unlock(&board_lock);
769 }
770
771 return 0;
772}
773
774/*-------------------------------------------------------------------------*/
775
776static void spi_set_cs(struct spi_device *spi, bool enable)
777{
778 if (spi->mode & SPI_CS_HIGH)
779 enable = !enable;
780
781 if (spi->cs_gpiod || gpio_is_valid(spi->cs_gpio)) {
782 /*
783 * Honour the SPI_NO_CS flag and invert the enable line, as
784 * active low is default for SPI. Execution paths that handle
785 * polarity inversion in gpiolib (such as device tree) will
786 * enforce active high using the SPI_CS_HIGH resulting in a
787 * double inversion through the code above.
788 */
789 if (!(spi->mode & SPI_NO_CS)) {
790 if (spi->cs_gpiod)
791 gpiod_set_value_cansleep(spi->cs_gpiod,
792 !enable);
793 else
794 gpio_set_value_cansleep(spi->cs_gpio, !enable);
795 }
796 /* Some SPI masters need both GPIO CS & slave_select */
797 if ((spi->controller->flags & SPI_MASTER_GPIO_SS) &&
798 spi->controller->set_cs)
799 spi->controller->set_cs(spi, !enable);
800 } else if (spi->controller->set_cs) {
801 spi->controller->set_cs(spi, !enable);
802 }
803}
804
805#ifdef CONFIG_HAS_DMA
806int spi_map_buf(struct spi_controller *ctlr, struct device *dev,
807 struct sg_table *sgt, void *buf, size_t len,
808 enum dma_data_direction dir)
809{
810 const bool vmalloced_buf = is_vmalloc_addr(buf);
811 unsigned int max_seg_size = dma_get_max_seg_size(dev);
812#ifdef CONFIG_HIGHMEM
813 const bool kmap_buf = ((unsigned long)buf >= PKMAP_BASE &&
814 (unsigned long)buf < (PKMAP_BASE +
815 (LAST_PKMAP * PAGE_SIZE)));
816#else
817 const bool kmap_buf = false;
818#endif
819 int desc_len;
820 int sgs;
821 struct page *vm_page;
822 struct scatterlist *sg;
823 void *sg_buf;
824 size_t min;
825 int i, ret;
826
827 if (vmalloced_buf || kmap_buf) {
828 desc_len = min_t(int, max_seg_size, PAGE_SIZE);
829 sgs = DIV_ROUND_UP(len + offset_in_page(buf), desc_len);
830 } else if (virt_addr_valid(buf)) {
831 desc_len = min_t(int, max_seg_size, ctlr->max_dma_len);
832 sgs = DIV_ROUND_UP(len, desc_len);
833 } else {
834 return -EINVAL;
835 }
836
837 ret = sg_alloc_table(sgt, sgs, GFP_KERNEL);
838 if (ret != 0)
839 return ret;
840
841 sg = &sgt->sgl[0];
842 for (i = 0; i < sgs; i++) {
843
844 if (vmalloced_buf || kmap_buf) {
845 /*
846 * Next scatterlist entry size is the minimum between
847 * the desc_len and the remaining buffer length that
848 * fits in a page.
849 */
850 min = min_t(size_t, desc_len,
851 min_t(size_t, len,
852 PAGE_SIZE - offset_in_page(buf)));
853 if (vmalloced_buf)
854 vm_page = vmalloc_to_page(buf);
855 else
856 vm_page = kmap_to_page(buf);
857 if (!vm_page) {
858 sg_free_table(sgt);
859 return -ENOMEM;
860 }
861 sg_set_page(sg, vm_page,
862 min, offset_in_page(buf));
863 } else {
864 min = min_t(size_t, len, desc_len);
865 sg_buf = buf;
866 sg_set_buf(sg, sg_buf, min);
867 }
868
869 buf += min;
870 len -= min;
871 sg = sg_next(sg);
872 }
873
874 ret = dma_map_sg(dev, sgt->sgl, sgt->nents, dir);
875 if (!ret)
876 ret = -ENOMEM;
877 if (ret < 0) {
878 sg_free_table(sgt);
879 return ret;
880 }
881
882 sgt->nents = ret;
883
884 return 0;
885}
886
887void spi_unmap_buf(struct spi_controller *ctlr, struct device *dev,
888 struct sg_table *sgt, enum dma_data_direction dir)
889{
890 if (sgt->orig_nents) {
891 dma_unmap_sg(dev, sgt->sgl, sgt->orig_nents, dir);
892 sg_free_table(sgt);
893 }
894}
895
896static int __spi_map_msg(struct spi_controller *ctlr, struct spi_message *msg)
897{
898 struct device *tx_dev, *rx_dev;
899 struct spi_transfer *xfer;
900 int ret;
901
902 if (!ctlr->can_dma)
903 return 0;
904
905 if (ctlr->dma_tx)
906 tx_dev = ctlr->dma_tx->device->dev;
907 else
908 tx_dev = ctlr->dev.parent;
909
910 if (ctlr->dma_rx)
911 rx_dev = ctlr->dma_rx->device->dev;
912 else
913 rx_dev = ctlr->dev.parent;
914
915 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
916 if (!ctlr->can_dma(ctlr, msg->spi, xfer))
917 continue;
918
919 if (xfer->tx_buf != NULL) {
920 ret = spi_map_buf(ctlr, tx_dev, &xfer->tx_sg,
921 (void *)xfer->tx_buf, xfer->len,
922 DMA_TO_DEVICE);
923 if (ret != 0)
924 return ret;
925 }
926
927 if (xfer->rx_buf != NULL) {
928 ret = spi_map_buf(ctlr, rx_dev, &xfer->rx_sg,
929 xfer->rx_buf, xfer->len,
930 DMA_FROM_DEVICE);
931 if (ret != 0) {
932 spi_unmap_buf(ctlr, tx_dev, &xfer->tx_sg,
933 DMA_TO_DEVICE);
934 return ret;
935 }
936 }
937 }
938
939 ctlr->cur_msg_mapped = true;
940
941 return 0;
942}
943
944static int __spi_unmap_msg(struct spi_controller *ctlr, struct spi_message *msg)
945{
946 struct spi_transfer *xfer;
947 struct device *tx_dev, *rx_dev;
948
949 if (!ctlr->cur_msg_mapped || !ctlr->can_dma)
950 return 0;
951
952 if (ctlr->dma_tx)
953 tx_dev = ctlr->dma_tx->device->dev;
954 else
955 tx_dev = ctlr->dev.parent;
956
957 if (ctlr->dma_rx)
958 rx_dev = ctlr->dma_rx->device->dev;
959 else
960 rx_dev = ctlr->dev.parent;
961
962 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
963 if (!ctlr->can_dma(ctlr, msg->spi, xfer))
964 continue;
965
966 spi_unmap_buf(ctlr, rx_dev, &xfer->rx_sg, DMA_FROM_DEVICE);
967 spi_unmap_buf(ctlr, tx_dev, &xfer->tx_sg, DMA_TO_DEVICE);
968 }
969
970 return 0;
971}
972#else /* !CONFIG_HAS_DMA */
973static inline int __spi_map_msg(struct spi_controller *ctlr,
974 struct spi_message *msg)
975{
976 return 0;
977}
978
979static inline int __spi_unmap_msg(struct spi_controller *ctlr,
980 struct spi_message *msg)
981{
982 return 0;
983}
984#endif /* !CONFIG_HAS_DMA */
985
986static inline int spi_unmap_msg(struct spi_controller *ctlr,
987 struct spi_message *msg)
988{
989 struct spi_transfer *xfer;
990
991 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
992 /*
993 * Restore the original value of tx_buf or rx_buf if they are
994 * NULL.
995 */
996 if (xfer->tx_buf == ctlr->dummy_tx)
997 xfer->tx_buf = NULL;
998 if (xfer->rx_buf == ctlr->dummy_rx)
999 xfer->rx_buf = NULL;
1000 }
1001
1002 return __spi_unmap_msg(ctlr, msg);
1003}
1004
1005static int spi_map_msg(struct spi_controller *ctlr, struct spi_message *msg)
1006{
1007 struct spi_transfer *xfer;
1008 void *tmp;
1009 unsigned int max_tx, max_rx;
1010
1011 if (ctlr->flags & (SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX)) {
1012 max_tx = 0;
1013 max_rx = 0;
1014
1015 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
1016 if ((ctlr->flags & SPI_CONTROLLER_MUST_TX) &&
1017 !xfer->tx_buf)
1018 max_tx = max(xfer->len, max_tx);
1019 if ((ctlr->flags & SPI_CONTROLLER_MUST_RX) &&
1020 !xfer->rx_buf)
1021 max_rx = max(xfer->len, max_rx);
1022 }
1023
1024 if (max_tx) {
1025 tmp = krealloc(ctlr->dummy_tx, max_tx,
1026 GFP_KERNEL | GFP_DMA);
1027 if (!tmp)
1028 return -ENOMEM;
1029 ctlr->dummy_tx = tmp;
1030 memset(tmp, 0, max_tx);
1031 }
1032
1033 if (max_rx) {
1034 tmp = krealloc(ctlr->dummy_rx, max_rx,
1035 GFP_KERNEL | GFP_DMA);
1036 if (!tmp)
1037 return -ENOMEM;
1038 ctlr->dummy_rx = tmp;
1039 }
1040
1041 if (max_tx || max_rx) {
1042 list_for_each_entry(xfer, &msg->transfers,
1043 transfer_list) {
1044 if (!xfer->len)
1045 continue;
1046 if (!xfer->tx_buf)
1047 xfer->tx_buf = ctlr->dummy_tx;
1048 if (!xfer->rx_buf)
1049 xfer->rx_buf = ctlr->dummy_rx;
1050 }
1051 }
1052 }
1053
1054 return __spi_map_msg(ctlr, msg);
1055}
1056
1057static int spi_transfer_wait(struct spi_controller *ctlr,
1058 struct spi_message *msg,
1059 struct spi_transfer *xfer)
1060{
1061 struct spi_statistics *statm = &ctlr->statistics;
1062 struct spi_statistics *stats = &msg->spi->statistics;
1063 unsigned long long ms = 1;
1064
1065 if (spi_controller_is_slave(ctlr)) {
1066 if (wait_for_completion_interruptible(&ctlr->xfer_completion)) {
1067 dev_dbg(&msg->spi->dev, "SPI transfer interrupted\n");
1068 return -EINTR;
1069 }
1070 } else {
1071 ms = 8LL * 1000LL * xfer->len;
1072 do_div(ms, xfer->speed_hz);
1073 ms += ms + 200; /* some tolerance */
1074
1075 if (ms > UINT_MAX)
1076 ms = UINT_MAX;
1077
1078 ms = wait_for_completion_timeout(&ctlr->xfer_completion,
1079 msecs_to_jiffies(ms));
1080
1081 if (ms == 0) {
1082 SPI_STATISTICS_INCREMENT_FIELD(statm, timedout);
1083 SPI_STATISTICS_INCREMENT_FIELD(stats, timedout);
1084 dev_err(&msg->spi->dev,
1085 "SPI transfer timed out\n");
1086 return -ETIMEDOUT;
1087 }
1088 }
1089
1090 return 0;
1091}
1092
1093static void _spi_transfer_delay_ns(u32 ns)
1094{
1095 if (!ns)
1096 return;
1097 if (ns <= 1000) {
1098 ndelay(ns);
1099 } else {
1100 u32 us = DIV_ROUND_UP(ns, 1000);
1101
1102 if (us <= 10)
1103 udelay(us);
1104 else
1105 usleep_range(us, us + DIV_ROUND_UP(us, 10));
1106 }
1107}
1108
1109static void _spi_transfer_cs_change_delay(struct spi_message *msg,
1110 struct spi_transfer *xfer)
1111{
1112 u32 delay = xfer->cs_change_delay;
1113 u32 unit = xfer->cs_change_delay_unit;
1114 u32 hz;
1115
1116 /* return early on "fast" mode - for everything but USECS */
1117 if (!delay && unit != SPI_DELAY_UNIT_USECS)
1118 return;
1119
1120 switch (unit) {
1121 case SPI_DELAY_UNIT_USECS:
1122 /* for compatibility use default of 10us */
1123 if (!delay)
1124 delay = 10000;
1125 else
1126 delay *= 1000;
1127 break;
1128 case SPI_DELAY_UNIT_NSECS: /* nothing to do here */
1129 break;
1130 case SPI_DELAY_UNIT_SCK:
1131 /* if there is no effective speed know, then approximate
1132 * by underestimating with half the requested hz
1133 */
1134 hz = xfer->effective_speed_hz ?: xfer->speed_hz / 2;
1135 delay *= DIV_ROUND_UP(1000000000, hz);
1136 break;
1137 default:
1138 dev_err_once(&msg->spi->dev,
1139 "Use of unsupported delay unit %i, using default of 10us\n",
1140 xfer->cs_change_delay_unit);
1141 delay = 10000;
1142 }
1143 /* now sleep for the requested amount of time */
1144 _spi_transfer_delay_ns(delay);
1145}
1146
1147/*
1148 * spi_transfer_one_message - Default implementation of transfer_one_message()
1149 *
1150 * This is a standard implementation of transfer_one_message() for
1151 * drivers which implement a transfer_one() operation. It provides
1152 * standard handling of delays and chip select management.
1153 */
1154static int spi_transfer_one_message(struct spi_controller *ctlr,
1155 struct spi_message *msg)
1156{
1157 struct spi_transfer *xfer;
1158 bool keep_cs = false;
1159 int ret = 0;
1160 struct spi_statistics *statm = &ctlr->statistics;
1161 struct spi_statistics *stats = &msg->spi->statistics;
1162
1163 spi_set_cs(msg->spi, true);
1164
1165 SPI_STATISTICS_INCREMENT_FIELD(statm, messages);
1166 SPI_STATISTICS_INCREMENT_FIELD(stats, messages);
1167
1168 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
1169 trace_spi_transfer_start(msg, xfer);
1170
1171 spi_statistics_add_transfer_stats(statm, xfer, ctlr);
1172 spi_statistics_add_transfer_stats(stats, xfer, ctlr);
1173
1174 if (xfer->tx_buf || xfer->rx_buf) {
1175 reinit_completion(&ctlr->xfer_completion);
1176
1177 ret = ctlr->transfer_one(ctlr, msg->spi, xfer);
1178 if (ret < 0) {
1179 SPI_STATISTICS_INCREMENT_FIELD(statm,
1180 errors);
1181 SPI_STATISTICS_INCREMENT_FIELD(stats,
1182 errors);
1183 dev_err(&msg->spi->dev,
1184 "SPI transfer failed: %d\n", ret);
1185 goto out;
1186 }
1187
1188 if (ret > 0) {
1189 ret = spi_transfer_wait(ctlr, msg, xfer);
1190 if (ret < 0)
1191 msg->status = ret;
1192 }
1193 } else {
1194 if (xfer->len)
1195 dev_err(&msg->spi->dev,
1196 "Bufferless transfer has length %u\n",
1197 xfer->len);
1198 }
1199
1200 trace_spi_transfer_stop(msg, xfer);
1201
1202 if (msg->status != -EINPROGRESS)
1203 goto out;
1204
1205 if (xfer->delay_usecs)
1206 _spi_transfer_delay_ns(xfer->delay_usecs * 1000);
1207
1208 if (xfer->cs_change) {
1209 if (list_is_last(&xfer->transfer_list,
1210 &msg->transfers)) {
1211 keep_cs = true;
1212 } else {
1213 spi_set_cs(msg->spi, false);
1214 _spi_transfer_cs_change_delay(msg, xfer);
1215 spi_set_cs(msg->spi, true);
1216 }
1217 }
1218
1219 msg->actual_length += xfer->len;
1220 }
1221
1222out:
1223 if (ret != 0 || !keep_cs)
1224 spi_set_cs(msg->spi, false);
1225
1226 if (msg->status == -EINPROGRESS)
1227 msg->status = ret;
1228
1229 if (msg->status && ctlr->handle_err)
1230 ctlr->handle_err(ctlr, msg);
1231
1232 spi_res_release(ctlr, msg);
1233
1234 spi_finalize_current_message(ctlr);
1235
1236 return ret;
1237}
1238
1239/**
1240 * spi_finalize_current_transfer - report completion of a transfer
1241 * @ctlr: the controller reporting completion
1242 *
1243 * Called by SPI drivers using the core transfer_one_message()
1244 * implementation to notify it that the current interrupt driven
1245 * transfer has finished and the next one may be scheduled.
1246 */
1247void spi_finalize_current_transfer(struct spi_controller *ctlr)
1248{
1249 complete(&ctlr->xfer_completion);
1250}
1251EXPORT_SYMBOL_GPL(spi_finalize_current_transfer);
1252
1253/**
1254 * __spi_pump_messages - function which processes spi message queue
1255 * @ctlr: controller to process queue for
1256 * @in_kthread: true if we are in the context of the message pump thread
1257 *
1258 * This function checks if there is any spi message in the queue that
1259 * needs processing and if so call out to the driver to initialize hardware
1260 * and transfer each message.
1261 *
1262 * Note that it is called both from the kthread itself and also from
1263 * inside spi_sync(); the queue extraction handling at the top of the
1264 * function should deal with this safely.
1265 */
1266static void __spi_pump_messages(struct spi_controller *ctlr, bool in_kthread)
1267{
1268 struct spi_message *msg;
1269 bool was_busy = false;
1270 unsigned long flags;
1271 int ret;
1272
1273 /* Lock queue */
1274 spin_lock_irqsave(&ctlr->queue_lock, flags);
1275
1276 /* Make sure we are not already running a message */
1277 if (ctlr->cur_msg) {
1278 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1279 return;
1280 }
1281
1282 /* If another context is idling the device then defer */
1283 if (ctlr->idling) {
1284 kthread_queue_work(&ctlr->kworker, &ctlr->pump_messages);
1285 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1286 return;
1287 }
1288
1289 /* Check if the queue is idle */
1290 if (list_empty(&ctlr->queue) || !ctlr->running) {
1291 if (!ctlr->busy) {
1292 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1293 return;
1294 }
1295
1296 /* Only do teardown in the thread */
1297 if (!in_kthread) {
1298 kthread_queue_work(&ctlr->kworker,
1299 &ctlr->pump_messages);
1300 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1301 return;
1302 }
1303
1304 ctlr->busy = false;
1305 ctlr->idling = true;
1306 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1307
1308 kfree(ctlr->dummy_rx);
1309 ctlr->dummy_rx = NULL;
1310 kfree(ctlr->dummy_tx);
1311 ctlr->dummy_tx = NULL;
1312 if (ctlr->unprepare_transfer_hardware &&
1313 ctlr->unprepare_transfer_hardware(ctlr))
1314 dev_err(&ctlr->dev,
1315 "failed to unprepare transfer hardware\n");
1316 if (ctlr->auto_runtime_pm) {
1317 pm_runtime_mark_last_busy(ctlr->dev.parent);
1318 pm_runtime_put_autosuspend(ctlr->dev.parent);
1319 }
1320 trace_spi_controller_idle(ctlr);
1321
1322 spin_lock_irqsave(&ctlr->queue_lock, flags);
1323 ctlr->idling = false;
1324 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1325 return;
1326 }
1327
1328 /* Extract head of queue */
1329 msg = list_first_entry(&ctlr->queue, struct spi_message, queue);
1330 ctlr->cur_msg = msg;
1331
1332 list_del_init(&msg->queue);
1333 if (ctlr->busy)
1334 was_busy = true;
1335 else
1336 ctlr->busy = true;
1337 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1338
1339 mutex_lock(&ctlr->io_mutex);
1340
1341 if (!was_busy && ctlr->auto_runtime_pm) {
1342 ret = pm_runtime_get_sync(ctlr->dev.parent);
1343 if (ret < 0) {
1344 pm_runtime_put_noidle(ctlr->dev.parent);
1345 dev_err(&ctlr->dev, "Failed to power device: %d\n",
1346 ret);
1347 mutex_unlock(&ctlr->io_mutex);
1348 return;
1349 }
1350 }
1351
1352 if (!was_busy)
1353 trace_spi_controller_busy(ctlr);
1354
1355 if (!was_busy && ctlr->prepare_transfer_hardware) {
1356 ret = ctlr->prepare_transfer_hardware(ctlr);
1357 if (ret) {
1358 dev_err(&ctlr->dev,
1359 "failed to prepare transfer hardware: %d\n",
1360 ret);
1361
1362 if (ctlr->auto_runtime_pm)
1363 pm_runtime_put(ctlr->dev.parent);
1364
1365 msg->status = ret;
1366 spi_finalize_current_message(ctlr);
1367
1368 mutex_unlock(&ctlr->io_mutex);
1369 return;
1370 }
1371 }
1372
1373 trace_spi_message_start(msg);
1374
1375 if (ctlr->prepare_message) {
1376 ret = ctlr->prepare_message(ctlr, msg);
1377 if (ret) {
1378 dev_err(&ctlr->dev, "failed to prepare message: %d\n",
1379 ret);
1380 msg->status = ret;
1381 spi_finalize_current_message(ctlr);
1382 goto out;
1383 }
1384 ctlr->cur_msg_prepared = true;
1385 }
1386
1387 ret = spi_map_msg(ctlr, msg);
1388 if (ret) {
1389 msg->status = ret;
1390 spi_finalize_current_message(ctlr);
1391 goto out;
1392 }
1393
1394 ret = ctlr->transfer_one_message(ctlr, msg);
1395 if (ret) {
1396 dev_err(&ctlr->dev,
1397 "failed to transfer one message from queue\n");
1398 goto out;
1399 }
1400
1401out:
1402 mutex_unlock(&ctlr->io_mutex);
1403
1404 /* Prod the scheduler in case transfer_one() was busy waiting */
1405 if (!ret)
1406 cond_resched();
1407}
1408
1409/**
1410 * spi_pump_messages - kthread work function which processes spi message queue
1411 * @work: pointer to kthread work struct contained in the controller struct
1412 */
1413static void spi_pump_messages(struct kthread_work *work)
1414{
1415 struct spi_controller *ctlr =
1416 container_of(work, struct spi_controller, pump_messages);
1417
1418 __spi_pump_messages(ctlr, true);
1419}
1420
1421/**
1422 * spi_set_thread_rt - set the controller to pump at realtime priority
1423 * @ctlr: controller to boost priority of
1424 *
1425 * This can be called because the controller requested realtime priority
1426 * (by setting the ->rt value before calling spi_register_controller()) or
1427 * because a device on the bus said that its transfers needed realtime
1428 * priority.
1429 *
1430 * NOTE: at the moment if any device on a bus says it needs realtime then
1431 * the thread will be at realtime priority for all transfers on that
1432 * controller. If this eventually becomes a problem we may see if we can
1433 * find a way to boost the priority only temporarily during relevant
1434 * transfers.
1435 */
1436static void spi_set_thread_rt(struct spi_controller *ctlr)
1437{
1438 struct sched_param param = { .sched_priority = MAX_RT_PRIO / 2 };
1439
1440 dev_info(&ctlr->dev,
1441 "will run message pump with realtime priority\n");
1442 sched_setscheduler(ctlr->kworker_task, SCHED_FIFO, ¶m);
1443}
1444
1445static int spi_init_queue(struct spi_controller *ctlr)
1446{
1447 ctlr->running = false;
1448 ctlr->busy = false;
1449
1450 kthread_init_worker(&ctlr->kworker);
1451 ctlr->kworker_task = kthread_run(kthread_worker_fn, &ctlr->kworker,
1452 "%s", dev_name(&ctlr->dev));
1453 if (IS_ERR(ctlr->kworker_task)) {
1454 dev_err(&ctlr->dev, "failed to create message pump task\n");
1455 return PTR_ERR(ctlr->kworker_task);
1456 }
1457 kthread_init_work(&ctlr->pump_messages, spi_pump_messages);
1458
1459 /*
1460 * Controller config will indicate if this controller should run the
1461 * message pump with high (realtime) priority to reduce the transfer
1462 * latency on the bus by minimising the delay between a transfer
1463 * request and the scheduling of the message pump thread. Without this
1464 * setting the message pump thread will remain at default priority.
1465 */
1466 if (ctlr->rt)
1467 spi_set_thread_rt(ctlr);
1468
1469 return 0;
1470}
1471
1472/**
1473 * spi_get_next_queued_message() - called by driver to check for queued
1474 * messages
1475 * @ctlr: the controller to check for queued messages
1476 *
1477 * If there are more messages in the queue, the next message is returned from
1478 * this call.
1479 *
1480 * Return: the next message in the queue, else NULL if the queue is empty.
1481 */
1482struct spi_message *spi_get_next_queued_message(struct spi_controller *ctlr)
1483{
1484 struct spi_message *next;
1485 unsigned long flags;
1486
1487 /* get a pointer to the next message, if any */
1488 spin_lock_irqsave(&ctlr->queue_lock, flags);
1489 next = list_first_entry_or_null(&ctlr->queue, struct spi_message,
1490 queue);
1491 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1492
1493 return next;
1494}
1495EXPORT_SYMBOL_GPL(spi_get_next_queued_message);
1496
1497/**
1498 * spi_finalize_current_message() - the current message is complete
1499 * @ctlr: the controller to return the message to
1500 *
1501 * Called by the driver to notify the core that the message in the front of the
1502 * queue is complete and can be removed from the queue.
1503 */
1504void spi_finalize_current_message(struct spi_controller *ctlr)
1505{
1506 struct spi_message *mesg;
1507 unsigned long flags;
1508 int ret;
1509
1510 spin_lock_irqsave(&ctlr->queue_lock, flags);
1511 mesg = ctlr->cur_msg;
1512 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1513
1514 spi_unmap_msg(ctlr, mesg);
1515
1516 if (ctlr->cur_msg_prepared && ctlr->unprepare_message) {
1517 ret = ctlr->unprepare_message(ctlr, mesg);
1518 if (ret) {
1519 dev_err(&ctlr->dev, "failed to unprepare message: %d\n",
1520 ret);
1521 }
1522 }
1523
1524 spin_lock_irqsave(&ctlr->queue_lock, flags);
1525 ctlr->cur_msg = NULL;
1526 ctlr->cur_msg_prepared = false;
1527 kthread_queue_work(&ctlr->kworker, &ctlr->pump_messages);
1528 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1529
1530 trace_spi_message_done(mesg);
1531
1532 mesg->state = NULL;
1533 if (mesg->complete)
1534 mesg->complete(mesg->context);
1535}
1536EXPORT_SYMBOL_GPL(spi_finalize_current_message);
1537
1538static int spi_start_queue(struct spi_controller *ctlr)
1539{
1540 unsigned long flags;
1541
1542 spin_lock_irqsave(&ctlr->queue_lock, flags);
1543
1544 if (ctlr->running || ctlr->busy) {
1545 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1546 return -EBUSY;
1547 }
1548
1549 ctlr->running = true;
1550 ctlr->cur_msg = NULL;
1551 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1552
1553 kthread_queue_work(&ctlr->kworker, &ctlr->pump_messages);
1554
1555 return 0;
1556}
1557
1558static int spi_stop_queue(struct spi_controller *ctlr)
1559{
1560 unsigned long flags;
1561 unsigned limit = 500;
1562 int ret = 0;
1563
1564 spin_lock_irqsave(&ctlr->queue_lock, flags);
1565
1566 /*
1567 * This is a bit lame, but is optimized for the common execution path.
1568 * A wait_queue on the ctlr->busy could be used, but then the common
1569 * execution path (pump_messages) would be required to call wake_up or
1570 * friends on every SPI message. Do this instead.
1571 */
1572 while ((!list_empty(&ctlr->queue) || ctlr->busy) && limit--) {
1573 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1574 usleep_range(10000, 11000);
1575 spin_lock_irqsave(&ctlr->queue_lock, flags);
1576 }
1577
1578 if (!list_empty(&ctlr->queue) || ctlr->busy)
1579 ret = -EBUSY;
1580 else
1581 ctlr->running = false;
1582
1583 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1584
1585 if (ret) {
1586 dev_warn(&ctlr->dev, "could not stop message queue\n");
1587 return ret;
1588 }
1589 return ret;
1590}
1591
1592static int spi_destroy_queue(struct spi_controller *ctlr)
1593{
1594 int ret;
1595
1596 ret = spi_stop_queue(ctlr);
1597
1598 /*
1599 * kthread_flush_worker will block until all work is done.
1600 * If the reason that stop_queue timed out is that the work will never
1601 * finish, then it does no good to call flush/stop thread, so
1602 * return anyway.
1603 */
1604 if (ret) {
1605 dev_err(&ctlr->dev, "problem destroying queue\n");
1606 return ret;
1607 }
1608
1609 kthread_flush_worker(&ctlr->kworker);
1610 kthread_stop(ctlr->kworker_task);
1611
1612 return 0;
1613}
1614
1615static int __spi_queued_transfer(struct spi_device *spi,
1616 struct spi_message *msg,
1617 bool need_pump)
1618{
1619 struct spi_controller *ctlr = spi->controller;
1620 unsigned long flags;
1621
1622 spin_lock_irqsave(&ctlr->queue_lock, flags);
1623
1624 if (!ctlr->running) {
1625 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1626 return -ESHUTDOWN;
1627 }
1628 msg->actual_length = 0;
1629 msg->status = -EINPROGRESS;
1630
1631 list_add_tail(&msg->queue, &ctlr->queue);
1632 if (!ctlr->busy && need_pump)
1633 kthread_queue_work(&ctlr->kworker, &ctlr->pump_messages);
1634
1635 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1636 return 0;
1637}
1638
1639/**
1640 * spi_queued_transfer - transfer function for queued transfers
1641 * @spi: spi device which is requesting transfer
1642 * @msg: spi message which is to handled is queued to driver queue
1643 *
1644 * Return: zero on success, else a negative error code.
1645 */
1646static int spi_queued_transfer(struct spi_device *spi, struct spi_message *msg)
1647{
1648 return __spi_queued_transfer(spi, msg, true);
1649}
1650
1651static int spi_controller_initialize_queue(struct spi_controller *ctlr)
1652{
1653 int ret;
1654
1655 ctlr->transfer = spi_queued_transfer;
1656 if (!ctlr->transfer_one_message)
1657 ctlr->transfer_one_message = spi_transfer_one_message;
1658
1659 /* Initialize and start queue */
1660 ret = spi_init_queue(ctlr);
1661 if (ret) {
1662 dev_err(&ctlr->dev, "problem initializing queue\n");
1663 goto err_init_queue;
1664 }
1665 ctlr->queued = true;
1666 ret = spi_start_queue(ctlr);
1667 if (ret) {
1668 dev_err(&ctlr->dev, "problem starting queue\n");
1669 goto err_start_queue;
1670 }
1671
1672 return 0;
1673
1674err_start_queue:
1675 spi_destroy_queue(ctlr);
1676err_init_queue:
1677 return ret;
1678}
1679
1680/**
1681 * spi_flush_queue - Send all pending messages in the queue from the callers'
1682 * context
1683 * @ctlr: controller to process queue for
1684 *
1685 * This should be used when one wants to ensure all pending messages have been
1686 * sent before doing something. Is used by the spi-mem code to make sure SPI
1687 * memory operations do not preempt regular SPI transfers that have been queued
1688 * before the spi-mem operation.
1689 */
1690void spi_flush_queue(struct spi_controller *ctlr)
1691{
1692 if (ctlr->transfer == spi_queued_transfer)
1693 __spi_pump_messages(ctlr, false);
1694}
1695
1696/*-------------------------------------------------------------------------*/
1697
1698#if defined(CONFIG_OF)
1699static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi,
1700 struct device_node *nc)
1701{
1702 u32 value;
1703 int rc;
1704
1705 /* Mode (clock phase/polarity/etc.) */
1706 if (of_property_read_bool(nc, "spi-cpha"))
1707 spi->mode |= SPI_CPHA;
1708 if (of_property_read_bool(nc, "spi-cpol"))
1709 spi->mode |= SPI_CPOL;
1710 if (of_property_read_bool(nc, "spi-3wire"))
1711 spi->mode |= SPI_3WIRE;
1712 if (of_property_read_bool(nc, "spi-lsb-first"))
1713 spi->mode |= SPI_LSB_FIRST;
1714
1715 /*
1716 * For descriptors associated with the device, polarity inversion is
1717 * handled in the gpiolib, so all chip selects are "active high" in
1718 * the logical sense, the gpiolib will invert the line if need be.
1719 */
1720 if (ctlr->use_gpio_descriptors)
1721 spi->mode |= SPI_CS_HIGH;
1722 else if (of_property_read_bool(nc, "spi-cs-high"))
1723 spi->mode |= SPI_CS_HIGH;
1724
1725 /* Device DUAL/QUAD mode */
1726 if (!of_property_read_u32(nc, "spi-tx-bus-width", &value)) {
1727 switch (value) {
1728 case 1:
1729 break;
1730 case 2:
1731 spi->mode |= SPI_TX_DUAL;
1732 break;
1733 case 4:
1734 spi->mode |= SPI_TX_QUAD;
1735 break;
1736 case 8:
1737 spi->mode |= SPI_TX_OCTAL;
1738 break;
1739 default:
1740 dev_warn(&ctlr->dev,
1741 "spi-tx-bus-width %d not supported\n",
1742 value);
1743 break;
1744 }
1745 }
1746
1747 if (!of_property_read_u32(nc, "spi-rx-bus-width", &value)) {
1748 switch (value) {
1749 case 1:
1750 break;
1751 case 2:
1752 spi->mode |= SPI_RX_DUAL;
1753 break;
1754 case 4:
1755 spi->mode |= SPI_RX_QUAD;
1756 break;
1757 case 8:
1758 spi->mode |= SPI_RX_OCTAL;
1759 break;
1760 default:
1761 dev_warn(&ctlr->dev,
1762 "spi-rx-bus-width %d not supported\n",
1763 value);
1764 break;
1765 }
1766 }
1767
1768 if (spi_controller_is_slave(ctlr)) {
1769 if (!of_node_name_eq(nc, "slave")) {
1770 dev_err(&ctlr->dev, "%pOF is not called 'slave'\n",
1771 nc);
1772 return -EINVAL;
1773 }
1774 return 0;
1775 }
1776
1777 /* Device address */
1778 rc = of_property_read_u32(nc, "reg", &value);
1779 if (rc) {
1780 dev_err(&ctlr->dev, "%pOF has no valid 'reg' property (%d)\n",
1781 nc, rc);
1782 return rc;
1783 }
1784 spi->chip_select = value;
1785
1786 /* Device speed */
1787 rc = of_property_read_u32(nc, "spi-max-frequency", &value);
1788 if (rc) {
1789 dev_err(&ctlr->dev,
1790 "%pOF has no valid 'spi-max-frequency' property (%d)\n", nc, rc);
1791 return rc;
1792 }
1793 spi->max_speed_hz = value;
1794
1795 return 0;
1796}
1797
1798static struct spi_device *
1799of_register_spi_device(struct spi_controller *ctlr, struct device_node *nc)
1800{
1801 struct spi_device *spi;
1802 int rc;
1803
1804 /* Alloc an spi_device */
1805 spi = spi_alloc_device(ctlr);
1806 if (!spi) {
1807 dev_err(&ctlr->dev, "spi_device alloc error for %pOF\n", nc);
1808 rc = -ENOMEM;
1809 goto err_out;
1810 }
1811
1812 /* Select device driver */
1813 rc = of_modalias_node(nc, spi->modalias,
1814 sizeof(spi->modalias));
1815 if (rc < 0) {
1816 dev_err(&ctlr->dev, "cannot find modalias for %pOF\n", nc);
1817 goto err_out;
1818 }
1819
1820 rc = of_spi_parse_dt(ctlr, spi, nc);
1821 if (rc)
1822 goto err_out;
1823
1824 /* Store a pointer to the node in the device structure */
1825 of_node_get(nc);
1826 spi->dev.of_node = nc;
1827
1828 /* Register the new device */
1829 rc = spi_add_device(spi);
1830 if (rc) {
1831 dev_err(&ctlr->dev, "spi_device register error %pOF\n", nc);
1832 goto err_of_node_put;
1833 }
1834
1835 return spi;
1836
1837err_of_node_put:
1838 of_node_put(nc);
1839err_out:
1840 spi_dev_put(spi);
1841 return ERR_PTR(rc);
1842}
1843
1844/**
1845 * of_register_spi_devices() - Register child devices onto the SPI bus
1846 * @ctlr: Pointer to spi_controller device
1847 *
1848 * Registers an spi_device for each child node of controller node which
1849 * represents a valid SPI slave.
1850 */
1851static void of_register_spi_devices(struct spi_controller *ctlr)
1852{
1853 struct spi_device *spi;
1854 struct device_node *nc;
1855
1856 if (!ctlr->dev.of_node)
1857 return;
1858
1859 for_each_available_child_of_node(ctlr->dev.of_node, nc) {
1860 if (of_node_test_and_set_flag(nc, OF_POPULATED))
1861 continue;
1862 spi = of_register_spi_device(ctlr, nc);
1863 if (IS_ERR(spi)) {
1864 dev_warn(&ctlr->dev,
1865 "Failed to create SPI device for %pOF\n", nc);
1866 of_node_clear_flag(nc, OF_POPULATED);
1867 }
1868 }
1869}
1870#else
1871static void of_register_spi_devices(struct spi_controller *ctlr) { }
1872#endif
1873
1874#ifdef CONFIG_ACPI
1875struct acpi_spi_lookup {
1876 struct spi_controller *ctlr;
1877 u32 max_speed_hz;
1878 u32 mode;
1879 int irq;
1880 u8 bits_per_word;
1881 u8 chip_select;
1882};
1883
1884static void acpi_spi_parse_apple_properties(struct acpi_device *dev,
1885 struct acpi_spi_lookup *lookup)
1886{
1887 const union acpi_object *obj;
1888
1889 if (!x86_apple_machine)
1890 return;
1891
1892 if (!acpi_dev_get_property(dev, "spiSclkPeriod", ACPI_TYPE_BUFFER, &obj)
1893 && obj->buffer.length >= 4)
1894 lookup->max_speed_hz = NSEC_PER_SEC / *(u32 *)obj->buffer.pointer;
1895
1896 if (!acpi_dev_get_property(dev, "spiWordSize", ACPI_TYPE_BUFFER, &obj)
1897 && obj->buffer.length == 8)
1898 lookup->bits_per_word = *(u64 *)obj->buffer.pointer;
1899
1900 if (!acpi_dev_get_property(dev, "spiBitOrder", ACPI_TYPE_BUFFER, &obj)
1901 && obj->buffer.length == 8 && !*(u64 *)obj->buffer.pointer)
1902 lookup->mode |= SPI_LSB_FIRST;
1903
1904 if (!acpi_dev_get_property(dev, "spiSPO", ACPI_TYPE_BUFFER, &obj)
1905 && obj->buffer.length == 8 && *(u64 *)obj->buffer.pointer)
1906 lookup->mode |= SPI_CPOL;
1907
1908 if (!acpi_dev_get_property(dev, "spiSPH", ACPI_TYPE_BUFFER, &obj)
1909 && obj->buffer.length == 8 && *(u64 *)obj->buffer.pointer)
1910 lookup->mode |= SPI_CPHA;
1911}
1912
1913static int acpi_spi_add_resource(struct acpi_resource *ares, void *data)
1914{
1915 struct acpi_spi_lookup *lookup = data;
1916 struct spi_controller *ctlr = lookup->ctlr;
1917
1918 if (ares->type == ACPI_RESOURCE_TYPE_SERIAL_BUS) {
1919 struct acpi_resource_spi_serialbus *sb;
1920 acpi_handle parent_handle;
1921 acpi_status status;
1922
1923 sb = &ares->data.spi_serial_bus;
1924 if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_SPI) {
1925
1926 status = acpi_get_handle(NULL,
1927 sb->resource_source.string_ptr,
1928 &parent_handle);
1929
1930 if (ACPI_FAILURE(status) ||
1931 ACPI_HANDLE(ctlr->dev.parent) != parent_handle)
1932 return -ENODEV;
1933
1934 /*
1935 * ACPI DeviceSelection numbering is handled by the
1936 * host controller driver in Windows and can vary
1937 * from driver to driver. In Linux we always expect
1938 * 0 .. max - 1 so we need to ask the driver to
1939 * translate between the two schemes.
1940 */
1941 if (ctlr->fw_translate_cs) {
1942 int cs = ctlr->fw_translate_cs(ctlr,
1943 sb->device_selection);
1944 if (cs < 0)
1945 return cs;
1946 lookup->chip_select = cs;
1947 } else {
1948 lookup->chip_select = sb->device_selection;
1949 }
1950
1951 lookup->max_speed_hz = sb->connection_speed;
1952
1953 if (sb->clock_phase == ACPI_SPI_SECOND_PHASE)
1954 lookup->mode |= SPI_CPHA;
1955 if (sb->clock_polarity == ACPI_SPI_START_HIGH)
1956 lookup->mode |= SPI_CPOL;
1957 if (sb->device_polarity == ACPI_SPI_ACTIVE_HIGH)
1958 lookup->mode |= SPI_CS_HIGH;
1959 }
1960 } else if (lookup->irq < 0) {
1961 struct resource r;
1962
1963 if (acpi_dev_resource_interrupt(ares, 0, &r))
1964 lookup->irq = r.start;
1965 }
1966
1967 /* Always tell the ACPI core to skip this resource */
1968 return 1;
1969}
1970
1971static acpi_status acpi_register_spi_device(struct spi_controller *ctlr,
1972 struct acpi_device *adev)
1973{
1974 acpi_handle parent_handle = NULL;
1975 struct list_head resource_list;
1976 struct acpi_spi_lookup lookup = {};
1977 struct spi_device *spi;
1978 int ret;
1979
1980 if (acpi_bus_get_status(adev) || !adev->status.present ||
1981 acpi_device_enumerated(adev))
1982 return AE_OK;
1983
1984 lookup.ctlr = ctlr;
1985 lookup.irq = -1;
1986
1987 INIT_LIST_HEAD(&resource_list);
1988 ret = acpi_dev_get_resources(adev, &resource_list,
1989 acpi_spi_add_resource, &lookup);
1990 acpi_dev_free_resource_list(&resource_list);
1991
1992 if (ret < 0)
1993 /* found SPI in _CRS but it points to another controller */
1994 return AE_OK;
1995
1996 if (!lookup.max_speed_hz &&
1997 !ACPI_FAILURE(acpi_get_parent(adev->handle, &parent_handle)) &&
1998 ACPI_HANDLE(ctlr->dev.parent) == parent_handle) {
1999 /* Apple does not use _CRS but nested devices for SPI slaves */
2000 acpi_spi_parse_apple_properties(adev, &lookup);
2001 }
2002
2003 if (!lookup.max_speed_hz)
2004 return AE_OK;
2005
2006 spi = spi_alloc_device(ctlr);
2007 if (!spi) {
2008 dev_err(&ctlr->dev, "failed to allocate SPI device for %s\n",
2009 dev_name(&adev->dev));
2010 return AE_NO_MEMORY;
2011 }
2012
2013 ACPI_COMPANION_SET(&spi->dev, adev);
2014 spi->max_speed_hz = lookup.max_speed_hz;
2015 spi->mode = lookup.mode;
2016 spi->irq = lookup.irq;
2017 spi->bits_per_word = lookup.bits_per_word;
2018 spi->chip_select = lookup.chip_select;
2019
2020 acpi_set_modalias(adev, acpi_device_hid(adev), spi->modalias,
2021 sizeof(spi->modalias));
2022
2023 if (spi->irq < 0)
2024 spi->irq = acpi_dev_gpio_irq_get(adev, 0);
2025
2026 acpi_device_set_enumerated(adev);
2027
2028 adev->power.flags.ignore_parent = true;
2029 if (spi_add_device(spi)) {
2030 adev->power.flags.ignore_parent = false;
2031 dev_err(&ctlr->dev, "failed to add SPI device %s from ACPI\n",
2032 dev_name(&adev->dev));
2033 spi_dev_put(spi);
2034 }
2035
2036 return AE_OK;
2037}
2038
2039static acpi_status acpi_spi_add_device(acpi_handle handle, u32 level,
2040 void *data, void **return_value)
2041{
2042 struct spi_controller *ctlr = data;
2043 struct acpi_device *adev;
2044
2045 if (acpi_bus_get_device(handle, &adev))
2046 return AE_OK;
2047
2048 return acpi_register_spi_device(ctlr, adev);
2049}
2050
2051#define SPI_ACPI_ENUMERATE_MAX_DEPTH 32
2052
2053static void acpi_register_spi_devices(struct spi_controller *ctlr)
2054{
2055 acpi_status status;
2056 acpi_handle handle;
2057
2058 handle = ACPI_HANDLE(ctlr->dev.parent);
2059 if (!handle)
2060 return;
2061
2062 status = acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
2063 SPI_ACPI_ENUMERATE_MAX_DEPTH,
2064 acpi_spi_add_device, NULL, ctlr, NULL);
2065 if (ACPI_FAILURE(status))
2066 dev_warn(&ctlr->dev, "failed to enumerate SPI slaves\n");
2067}
2068#else
2069static inline void acpi_register_spi_devices(struct spi_controller *ctlr) {}
2070#endif /* CONFIG_ACPI */
2071
2072static void spi_controller_release(struct device *dev)
2073{
2074 struct spi_controller *ctlr;
2075
2076 ctlr = container_of(dev, struct spi_controller, dev);
2077 kfree(ctlr);
2078}
2079
2080static struct class spi_master_class = {
2081 .name = "spi_master",
2082 .owner = THIS_MODULE,
2083 .dev_release = spi_controller_release,
2084 .dev_groups = spi_master_groups,
2085};
2086
2087#ifdef CONFIG_SPI_SLAVE
2088/**
2089 * spi_slave_abort - abort the ongoing transfer request on an SPI slave
2090 * controller
2091 * @spi: device used for the current transfer
2092 */
2093int spi_slave_abort(struct spi_device *spi)
2094{
2095 struct spi_controller *ctlr = spi->controller;
2096
2097 if (spi_controller_is_slave(ctlr) && ctlr->slave_abort)
2098 return ctlr->slave_abort(ctlr);
2099
2100 return -ENOTSUPP;
2101}
2102EXPORT_SYMBOL_GPL(spi_slave_abort);
2103
2104static int match_true(struct device *dev, void *data)
2105{
2106 return 1;
2107}
2108
2109static ssize_t slave_show(struct device *dev, struct device_attribute *attr,
2110 char *buf)
2111{
2112 struct spi_controller *ctlr = container_of(dev, struct spi_controller,
2113 dev);
2114 struct device *child;
2115
2116 child = device_find_child(&ctlr->dev, NULL, match_true);
2117 return sprintf(buf, "%s\n",
2118 child ? to_spi_device(child)->modalias : NULL);
2119}
2120
2121static ssize_t slave_store(struct device *dev, struct device_attribute *attr,
2122 const char *buf, size_t count)
2123{
2124 struct spi_controller *ctlr = container_of(dev, struct spi_controller,
2125 dev);
2126 struct spi_device *spi;
2127 struct device *child;
2128 char name[32];
2129 int rc;
2130
2131 rc = sscanf(buf, "%31s", name);
2132 if (rc != 1 || !name[0])
2133 return -EINVAL;
2134
2135 child = device_find_child(&ctlr->dev, NULL, match_true);
2136 if (child) {
2137 /* Remove registered slave */
2138 device_unregister(child);
2139 put_device(child);
2140 }
2141
2142 if (strcmp(name, "(null)")) {
2143 /* Register new slave */
2144 spi = spi_alloc_device(ctlr);
2145 if (!spi)
2146 return -ENOMEM;
2147
2148 strlcpy(spi->modalias, name, sizeof(spi->modalias));
2149
2150 rc = spi_add_device(spi);
2151 if (rc) {
2152 spi_dev_put(spi);
2153 return rc;
2154 }
2155 }
2156
2157 return count;
2158}
2159
2160static DEVICE_ATTR_RW(slave);
2161
2162static struct attribute *spi_slave_attrs[] = {
2163 &dev_attr_slave.attr,
2164 NULL,
2165};
2166
2167static const struct attribute_group spi_slave_group = {
2168 .attrs = spi_slave_attrs,
2169};
2170
2171static const struct attribute_group *spi_slave_groups[] = {
2172 &spi_controller_statistics_group,
2173 &spi_slave_group,
2174 NULL,
2175};
2176
2177static struct class spi_slave_class = {
2178 .name = "spi_slave",
2179 .owner = THIS_MODULE,
2180 .dev_release = spi_controller_release,
2181 .dev_groups = spi_slave_groups,
2182};
2183#else
2184extern struct class spi_slave_class; /* dummy */
2185#endif
2186
2187/**
2188 * __spi_alloc_controller - allocate an SPI master or slave controller
2189 * @dev: the controller, possibly using the platform_bus
2190 * @size: how much zeroed driver-private data to allocate; the pointer to this
2191 * memory is in the driver_data field of the returned device, accessible
2192 * with spi_controller_get_devdata(); the memory is cacheline aligned;
2193 * drivers granting DMA access to portions of their private data need to
2194 * round up @size using ALIGN(size, dma_get_cache_alignment()).
2195 * @slave: flag indicating whether to allocate an SPI master (false) or SPI
2196 * slave (true) controller
2197 * Context: can sleep
2198 *
2199 * This call is used only by SPI controller drivers, which are the
2200 * only ones directly touching chip registers. It's how they allocate
2201 * an spi_controller structure, prior to calling spi_register_controller().
2202 *
2203 * This must be called from context that can sleep.
2204 *
2205 * The caller is responsible for assigning the bus number and initializing the
2206 * controller's methods before calling spi_register_controller(); and (after
2207 * errors adding the device) calling spi_controller_put() to prevent a memory
2208 * leak.
2209 *
2210 * Return: the SPI controller structure on success, else NULL.
2211 */
2212struct spi_controller *__spi_alloc_controller(struct device *dev,
2213 unsigned int size, bool slave)
2214{
2215 struct spi_controller *ctlr;
2216 size_t ctlr_size = ALIGN(sizeof(*ctlr), dma_get_cache_alignment());
2217
2218 if (!dev)
2219 return NULL;
2220
2221 ctlr = kzalloc(size + ctlr_size, GFP_KERNEL);
2222 if (!ctlr)
2223 return NULL;
2224
2225 device_initialize(&ctlr->dev);
2226 ctlr->bus_num = -1;
2227 ctlr->num_chipselect = 1;
2228 ctlr->slave = slave;
2229 if (IS_ENABLED(CONFIG_SPI_SLAVE) && slave)
2230 ctlr->dev.class = &spi_slave_class;
2231 else
2232 ctlr->dev.class = &spi_master_class;
2233 ctlr->dev.parent = dev;
2234 pm_suspend_ignore_children(&ctlr->dev, true);
2235 spi_controller_set_devdata(ctlr, (void *)ctlr + ctlr_size);
2236
2237 return ctlr;
2238}
2239EXPORT_SYMBOL_GPL(__spi_alloc_controller);
2240
2241#ifdef CONFIG_OF
2242static int of_spi_get_gpio_numbers(struct spi_controller *ctlr)
2243{
2244 int nb, i, *cs;
2245 struct device_node *np = ctlr->dev.of_node;
2246
2247 if (!np)
2248 return 0;
2249
2250 nb = of_gpio_named_count(np, "cs-gpios");
2251 ctlr->num_chipselect = max_t(int, nb, ctlr->num_chipselect);
2252
2253 /* Return error only for an incorrectly formed cs-gpios property */
2254 if (nb == 0 || nb == -ENOENT)
2255 return 0;
2256 else if (nb < 0)
2257 return nb;
2258
2259 cs = devm_kcalloc(&ctlr->dev, ctlr->num_chipselect, sizeof(int),
2260 GFP_KERNEL);
2261 ctlr->cs_gpios = cs;
2262
2263 if (!ctlr->cs_gpios)
2264 return -ENOMEM;
2265
2266 for (i = 0; i < ctlr->num_chipselect; i++)
2267 cs[i] = -ENOENT;
2268
2269 for (i = 0; i < nb; i++)
2270 cs[i] = of_get_named_gpio(np, "cs-gpios", i);
2271
2272 return 0;
2273}
2274#else
2275static int of_spi_get_gpio_numbers(struct spi_controller *ctlr)
2276{
2277 return 0;
2278}
2279#endif
2280
2281/**
2282 * spi_get_gpio_descs() - grab chip select GPIOs for the master
2283 * @ctlr: The SPI master to grab GPIO descriptors for
2284 */
2285static int spi_get_gpio_descs(struct spi_controller *ctlr)
2286{
2287 int nb, i;
2288 struct gpio_desc **cs;
2289 struct device *dev = &ctlr->dev;
2290
2291 nb = gpiod_count(dev, "cs");
2292 ctlr->num_chipselect = max_t(int, nb, ctlr->num_chipselect);
2293
2294 /* No GPIOs at all is fine, else return the error */
2295 if (nb == 0 || nb == -ENOENT)
2296 return 0;
2297 else if (nb < 0)
2298 return nb;
2299
2300 cs = devm_kcalloc(dev, ctlr->num_chipselect, sizeof(*cs),
2301 GFP_KERNEL);
2302 if (!cs)
2303 return -ENOMEM;
2304 ctlr->cs_gpiods = cs;
2305
2306 for (i = 0; i < nb; i++) {
2307 /*
2308 * Most chipselects are active low, the inverted
2309 * semantics are handled by special quirks in gpiolib,
2310 * so initializing them GPIOD_OUT_LOW here means
2311 * "unasserted", in most cases this will drive the physical
2312 * line high.
2313 */
2314 cs[i] = devm_gpiod_get_index_optional(dev, "cs", i,
2315 GPIOD_OUT_LOW);
2316 if (IS_ERR(cs[i]))
2317 return PTR_ERR(cs[i]);
2318
2319 if (cs[i]) {
2320 /*
2321 * If we find a CS GPIO, name it after the device and
2322 * chip select line.
2323 */
2324 char *gpioname;
2325
2326 gpioname = devm_kasprintf(dev, GFP_KERNEL, "%s CS%d",
2327 dev_name(dev), i);
2328 if (!gpioname)
2329 return -ENOMEM;
2330 gpiod_set_consumer_name(cs[i], gpioname);
2331 }
2332 }
2333
2334 return 0;
2335}
2336
2337static int spi_controller_check_ops(struct spi_controller *ctlr)
2338{
2339 /*
2340 * The controller may implement only the high-level SPI-memory like
2341 * operations if it does not support regular SPI transfers, and this is
2342 * valid use case.
2343 * If ->mem_ops is NULL, we request that at least one of the
2344 * ->transfer_xxx() method be implemented.
2345 */
2346 if (ctlr->mem_ops) {
2347 if (!ctlr->mem_ops->exec_op)
2348 return -EINVAL;
2349 } else if (!ctlr->transfer && !ctlr->transfer_one &&
2350 !ctlr->transfer_one_message) {
2351 return -EINVAL;
2352 }
2353
2354 return 0;
2355}
2356
2357/**
2358 * spi_register_controller - register SPI master or slave controller
2359 * @ctlr: initialized master, originally from spi_alloc_master() or
2360 * spi_alloc_slave()
2361 * Context: can sleep
2362 *
2363 * SPI controllers connect to their drivers using some non-SPI bus,
2364 * such as the platform bus. The final stage of probe() in that code
2365 * includes calling spi_register_controller() to hook up to this SPI bus glue.
2366 *
2367 * SPI controllers use board specific (often SOC specific) bus numbers,
2368 * and board-specific addressing for SPI devices combines those numbers
2369 * with chip select numbers. Since SPI does not directly support dynamic
2370 * device identification, boards need configuration tables telling which
2371 * chip is at which address.
2372 *
2373 * This must be called from context that can sleep. It returns zero on
2374 * success, else a negative error code (dropping the controller's refcount).
2375 * After a successful return, the caller is responsible for calling
2376 * spi_unregister_controller().
2377 *
2378 * Return: zero on success, else a negative error code.
2379 */
2380int spi_register_controller(struct spi_controller *ctlr)
2381{
2382 struct device *dev = ctlr->dev.parent;
2383 struct boardinfo *bi;
2384 int status;
2385 int id, first_dynamic;
2386
2387 if (!dev)
2388 return -ENODEV;
2389
2390 /*
2391 * Make sure all necessary hooks are implemented before registering
2392 * the SPI controller.
2393 */
2394 status = spi_controller_check_ops(ctlr);
2395 if (status)
2396 return status;
2397
2398 if (ctlr->bus_num >= 0) {
2399 /* devices with a fixed bus num must check-in with the num */
2400 mutex_lock(&board_lock);
2401 id = idr_alloc(&spi_master_idr, ctlr, ctlr->bus_num,
2402 ctlr->bus_num + 1, GFP_KERNEL);
2403 mutex_unlock(&board_lock);
2404 if (WARN(id < 0, "couldn't get idr"))
2405 return id == -ENOSPC ? -EBUSY : id;
2406 ctlr->bus_num = id;
2407 } else if (ctlr->dev.of_node) {
2408 /* allocate dynamic bus number using Linux idr */
2409 id = of_alias_get_id(ctlr->dev.of_node, "spi");
2410 if (id >= 0) {
2411 ctlr->bus_num = id;
2412 mutex_lock(&board_lock);
2413 id = idr_alloc(&spi_master_idr, ctlr, ctlr->bus_num,
2414 ctlr->bus_num + 1, GFP_KERNEL);
2415 mutex_unlock(&board_lock);
2416 if (WARN(id < 0, "couldn't get idr"))
2417 return id == -ENOSPC ? -EBUSY : id;
2418 }
2419 }
2420 if (ctlr->bus_num < 0) {
2421 first_dynamic = of_alias_get_highest_id("spi");
2422 if (first_dynamic < 0)
2423 first_dynamic = 0;
2424 else
2425 first_dynamic++;
2426
2427 mutex_lock(&board_lock);
2428 id = idr_alloc(&spi_master_idr, ctlr, first_dynamic,
2429 0, GFP_KERNEL);
2430 mutex_unlock(&board_lock);
2431 if (WARN(id < 0, "couldn't get idr"))
2432 return id;
2433 ctlr->bus_num = id;
2434 }
2435 INIT_LIST_HEAD(&ctlr->queue);
2436 spin_lock_init(&ctlr->queue_lock);
2437 spin_lock_init(&ctlr->bus_lock_spinlock);
2438 mutex_init(&ctlr->bus_lock_mutex);
2439 mutex_init(&ctlr->io_mutex);
2440 ctlr->bus_lock_flag = 0;
2441 init_completion(&ctlr->xfer_completion);
2442 if (!ctlr->max_dma_len)
2443 ctlr->max_dma_len = INT_MAX;
2444
2445 /* register the device, then userspace will see it.
2446 * registration fails if the bus ID is in use.
2447 */
2448 dev_set_name(&ctlr->dev, "spi%u", ctlr->bus_num);
2449
2450 if (!spi_controller_is_slave(ctlr)) {
2451 if (ctlr->use_gpio_descriptors) {
2452 status = spi_get_gpio_descs(ctlr);
2453 if (status)
2454 return status;
2455 /*
2456 * A controller using GPIO descriptors always
2457 * supports SPI_CS_HIGH if need be.
2458 */
2459 ctlr->mode_bits |= SPI_CS_HIGH;
2460 } else {
2461 /* Legacy code path for GPIOs from DT */
2462 status = of_spi_get_gpio_numbers(ctlr);
2463 if (status)
2464 return status;
2465 }
2466 }
2467
2468 /*
2469 * Even if it's just one always-selected device, there must
2470 * be at least one chipselect.
2471 */
2472 if (!ctlr->num_chipselect)
2473 return -EINVAL;
2474
2475 status = device_add(&ctlr->dev);
2476 if (status < 0) {
2477 /* free bus id */
2478 mutex_lock(&board_lock);
2479 idr_remove(&spi_master_idr, ctlr->bus_num);
2480 mutex_unlock(&board_lock);
2481 goto done;
2482 }
2483 dev_dbg(dev, "registered %s %s\n",
2484 spi_controller_is_slave(ctlr) ? "slave" : "master",
2485 dev_name(&ctlr->dev));
2486
2487 /*
2488 * If we're using a queued driver, start the queue. Note that we don't
2489 * need the queueing logic if the driver is only supporting high-level
2490 * memory operations.
2491 */
2492 if (ctlr->transfer) {
2493 dev_info(dev, "controller is unqueued, this is deprecated\n");
2494 } else if (ctlr->transfer_one || ctlr->transfer_one_message) {
2495 status = spi_controller_initialize_queue(ctlr);
2496 if (status) {
2497 device_del(&ctlr->dev);
2498 /* free bus id */
2499 mutex_lock(&board_lock);
2500 idr_remove(&spi_master_idr, ctlr->bus_num);
2501 mutex_unlock(&board_lock);
2502 goto done;
2503 }
2504 }
2505 /* add statistics */
2506 spin_lock_init(&ctlr->statistics.lock);
2507
2508 mutex_lock(&board_lock);
2509 list_add_tail(&ctlr->list, &spi_controller_list);
2510 list_for_each_entry(bi, &board_list, list)
2511 spi_match_controller_to_boardinfo(ctlr, &bi->board_info);
2512 mutex_unlock(&board_lock);
2513
2514 /* Register devices from the device tree and ACPI */
2515 of_register_spi_devices(ctlr);
2516 acpi_register_spi_devices(ctlr);
2517done:
2518 return status;
2519}
2520EXPORT_SYMBOL_GPL(spi_register_controller);
2521
2522static void devm_spi_unregister(struct device *dev, void *res)
2523{
2524 spi_unregister_controller(*(struct spi_controller **)res);
2525}
2526
2527/**
2528 * devm_spi_register_controller - register managed SPI master or slave
2529 * controller
2530 * @dev: device managing SPI controller
2531 * @ctlr: initialized controller, originally from spi_alloc_master() or
2532 * spi_alloc_slave()
2533 * Context: can sleep
2534 *
2535 * Register a SPI device as with spi_register_controller() which will
2536 * automatically be unregistered and freed.
2537 *
2538 * Return: zero on success, else a negative error code.
2539 */
2540int devm_spi_register_controller(struct device *dev,
2541 struct spi_controller *ctlr)
2542{
2543 struct spi_controller **ptr;
2544 int ret;
2545
2546 ptr = devres_alloc(devm_spi_unregister, sizeof(*ptr), GFP_KERNEL);
2547 if (!ptr)
2548 return -ENOMEM;
2549
2550 ret = spi_register_controller(ctlr);
2551 if (!ret) {
2552 *ptr = ctlr;
2553 devres_add(dev, ptr);
2554 } else {
2555 devres_free(ptr);
2556 }
2557
2558 return ret;
2559}
2560EXPORT_SYMBOL_GPL(devm_spi_register_controller);
2561
2562static int __unregister(struct device *dev, void *null)
2563{
2564 spi_unregister_device(to_spi_device(dev));
2565 return 0;
2566}
2567
2568/**
2569 * spi_unregister_controller - unregister SPI master or slave controller
2570 * @ctlr: the controller being unregistered
2571 * Context: can sleep
2572 *
2573 * This call is used only by SPI controller drivers, which are the
2574 * only ones directly touching chip registers.
2575 *
2576 * This must be called from context that can sleep.
2577 *
2578 * Note that this function also drops a reference to the controller.
2579 */
2580void spi_unregister_controller(struct spi_controller *ctlr)
2581{
2582 struct spi_controller *found;
2583 int id = ctlr->bus_num;
2584
2585 /* First make sure that this controller was ever added */
2586 mutex_lock(&board_lock);
2587 found = idr_find(&spi_master_idr, id);
2588 mutex_unlock(&board_lock);
2589 if (ctlr->queued) {
2590 if (spi_destroy_queue(ctlr))
2591 dev_err(&ctlr->dev, "queue remove failed\n");
2592 }
2593 mutex_lock(&board_lock);
2594 list_del(&ctlr->list);
2595 mutex_unlock(&board_lock);
2596
2597 device_for_each_child(&ctlr->dev, NULL, __unregister);
2598 device_unregister(&ctlr->dev);
2599 /* free bus id */
2600 mutex_lock(&board_lock);
2601 if (found == ctlr)
2602 idr_remove(&spi_master_idr, id);
2603 mutex_unlock(&board_lock);
2604}
2605EXPORT_SYMBOL_GPL(spi_unregister_controller);
2606
2607int spi_controller_suspend(struct spi_controller *ctlr)
2608{
2609 int ret;
2610
2611 /* Basically no-ops for non-queued controllers */
2612 if (!ctlr->queued)
2613 return 0;
2614
2615 ret = spi_stop_queue(ctlr);
2616 if (ret)
2617 dev_err(&ctlr->dev, "queue stop failed\n");
2618
2619 return ret;
2620}
2621EXPORT_SYMBOL_GPL(spi_controller_suspend);
2622
2623int spi_controller_resume(struct spi_controller *ctlr)
2624{
2625 int ret;
2626
2627 if (!ctlr->queued)
2628 return 0;
2629
2630 ret = spi_start_queue(ctlr);
2631 if (ret)
2632 dev_err(&ctlr->dev, "queue restart failed\n");
2633
2634 return ret;
2635}
2636EXPORT_SYMBOL_GPL(spi_controller_resume);
2637
2638static int __spi_controller_match(struct device *dev, const void *data)
2639{
2640 struct spi_controller *ctlr;
2641 const u16 *bus_num = data;
2642
2643 ctlr = container_of(dev, struct spi_controller, dev);
2644 return ctlr->bus_num == *bus_num;
2645}
2646
2647/**
2648 * spi_busnum_to_master - look up master associated with bus_num
2649 * @bus_num: the master's bus number
2650 * Context: can sleep
2651 *
2652 * This call may be used with devices that are registered after
2653 * arch init time. It returns a refcounted pointer to the relevant
2654 * spi_controller (which the caller must release), or NULL if there is
2655 * no such master registered.
2656 *
2657 * Return: the SPI master structure on success, else NULL.
2658 */
2659struct spi_controller *spi_busnum_to_master(u16 bus_num)
2660{
2661 struct device *dev;
2662 struct spi_controller *ctlr = NULL;
2663
2664 dev = class_find_device(&spi_master_class, NULL, &bus_num,
2665 __spi_controller_match);
2666 if (dev)
2667 ctlr = container_of(dev, struct spi_controller, dev);
2668 /* reference got in class_find_device */
2669 return ctlr;
2670}
2671EXPORT_SYMBOL_GPL(spi_busnum_to_master);
2672
2673/*-------------------------------------------------------------------------*/
2674
2675/* Core methods for SPI resource management */
2676
2677/**
2678 * spi_res_alloc - allocate a spi resource that is life-cycle managed
2679 * during the processing of a spi_message while using
2680 * spi_transfer_one
2681 * @spi: the spi device for which we allocate memory
2682 * @release: the release code to execute for this resource
2683 * @size: size to alloc and return
2684 * @gfp: GFP allocation flags
2685 *
2686 * Return: the pointer to the allocated data
2687 *
2688 * This may get enhanced in the future to allocate from a memory pool
2689 * of the @spi_device or @spi_controller to avoid repeated allocations.
2690 */
2691void *spi_res_alloc(struct spi_device *spi,
2692 spi_res_release_t release,
2693 size_t size, gfp_t gfp)
2694{
2695 struct spi_res *sres;
2696
2697 sres = kzalloc(sizeof(*sres) + size, gfp);
2698 if (!sres)
2699 return NULL;
2700
2701 INIT_LIST_HEAD(&sres->entry);
2702 sres->release = release;
2703
2704 return sres->data;
2705}
2706EXPORT_SYMBOL_GPL(spi_res_alloc);
2707
2708/**
2709 * spi_res_free - free an spi resource
2710 * @res: pointer to the custom data of a resource
2711 *
2712 */
2713void spi_res_free(void *res)
2714{
2715 struct spi_res *sres = container_of(res, struct spi_res, data);
2716
2717 if (!res)
2718 return;
2719
2720 WARN_ON(!list_empty(&sres->entry));
2721 kfree(sres);
2722}
2723EXPORT_SYMBOL_GPL(spi_res_free);
2724
2725/**
2726 * spi_res_add - add a spi_res to the spi_message
2727 * @message: the spi message
2728 * @res: the spi_resource
2729 */
2730void spi_res_add(struct spi_message *message, void *res)
2731{
2732 struct spi_res *sres = container_of(res, struct spi_res, data);
2733
2734 WARN_ON(!list_empty(&sres->entry));
2735 list_add_tail(&sres->entry, &message->resources);
2736}
2737EXPORT_SYMBOL_GPL(spi_res_add);
2738
2739/**
2740 * spi_res_release - release all spi resources for this message
2741 * @ctlr: the @spi_controller
2742 * @message: the @spi_message
2743 */
2744void spi_res_release(struct spi_controller *ctlr, struct spi_message *message)
2745{
2746 struct spi_res *res, *tmp;
2747
2748 list_for_each_entry_safe_reverse(res, tmp, &message->resources, entry) {
2749 if (res->release)
2750 res->release(ctlr, message, res->data);
2751
2752 list_del(&res->entry);
2753
2754 kfree(res);
2755 }
2756}
2757EXPORT_SYMBOL_GPL(spi_res_release);
2758
2759/*-------------------------------------------------------------------------*/
2760
2761/* Core methods for spi_message alterations */
2762
2763static void __spi_replace_transfers_release(struct spi_controller *ctlr,
2764 struct spi_message *msg,
2765 void *res)
2766{
2767 struct spi_replaced_transfers *rxfer = res;
2768 size_t i;
2769
2770 /* call extra callback if requested */
2771 if (rxfer->release)
2772 rxfer->release(ctlr, msg, res);
2773
2774 /* insert replaced transfers back into the message */
2775 list_splice(&rxfer->replaced_transfers, rxfer->replaced_after);
2776
2777 /* remove the formerly inserted entries */
2778 for (i = 0; i < rxfer->inserted; i++)
2779 list_del(&rxfer->inserted_transfers[i].transfer_list);
2780}
2781
2782/**
2783 * spi_replace_transfers - replace transfers with several transfers
2784 * and register change with spi_message.resources
2785 * @msg: the spi_message we work upon
2786 * @xfer_first: the first spi_transfer we want to replace
2787 * @remove: number of transfers to remove
2788 * @insert: the number of transfers we want to insert instead
2789 * @release: extra release code necessary in some circumstances
2790 * @extradatasize: extra data to allocate (with alignment guarantees
2791 * of struct @spi_transfer)
2792 * @gfp: gfp flags
2793 *
2794 * Returns: pointer to @spi_replaced_transfers,
2795 * PTR_ERR(...) in case of errors.
2796 */
2797struct spi_replaced_transfers *spi_replace_transfers(
2798 struct spi_message *msg,
2799 struct spi_transfer *xfer_first,
2800 size_t remove,
2801 size_t insert,
2802 spi_replaced_release_t release,
2803 size_t extradatasize,
2804 gfp_t gfp)
2805{
2806 struct spi_replaced_transfers *rxfer;
2807 struct spi_transfer *xfer;
2808 size_t i;
2809
2810 /* allocate the structure using spi_res */
2811 rxfer = spi_res_alloc(msg->spi, __spi_replace_transfers_release,
2812 struct_size(rxfer, inserted_transfers, insert)
2813 + extradatasize,
2814 gfp);
2815 if (!rxfer)
2816 return ERR_PTR(-ENOMEM);
2817
2818 /* the release code to invoke before running the generic release */
2819 rxfer->release = release;
2820
2821 /* assign extradata */
2822 if (extradatasize)
2823 rxfer->extradata =
2824 &rxfer->inserted_transfers[insert];
2825
2826 /* init the replaced_transfers list */
2827 INIT_LIST_HEAD(&rxfer->replaced_transfers);
2828
2829 /* assign the list_entry after which we should reinsert
2830 * the @replaced_transfers - it may be spi_message.messages!
2831 */
2832 rxfer->replaced_after = xfer_first->transfer_list.prev;
2833
2834 /* remove the requested number of transfers */
2835 for (i = 0; i < remove; i++) {
2836 /* if the entry after replaced_after it is msg->transfers
2837 * then we have been requested to remove more transfers
2838 * than are in the list
2839 */
2840 if (rxfer->replaced_after->next == &msg->transfers) {
2841 dev_err(&msg->spi->dev,
2842 "requested to remove more spi_transfers than are available\n");
2843 /* insert replaced transfers back into the message */
2844 list_splice(&rxfer->replaced_transfers,
2845 rxfer->replaced_after);
2846
2847 /* free the spi_replace_transfer structure */
2848 spi_res_free(rxfer);
2849
2850 /* and return with an error */
2851 return ERR_PTR(-EINVAL);
2852 }
2853
2854 /* remove the entry after replaced_after from list of
2855 * transfers and add it to list of replaced_transfers
2856 */
2857 list_move_tail(rxfer->replaced_after->next,
2858 &rxfer->replaced_transfers);
2859 }
2860
2861 /* create copy of the given xfer with identical settings
2862 * based on the first transfer to get removed
2863 */
2864 for (i = 0; i < insert; i++) {
2865 /* we need to run in reverse order */
2866 xfer = &rxfer->inserted_transfers[insert - 1 - i];
2867
2868 /* copy all spi_transfer data */
2869 memcpy(xfer, xfer_first, sizeof(*xfer));
2870
2871 /* add to list */
2872 list_add(&xfer->transfer_list, rxfer->replaced_after);
2873
2874 /* clear cs_change and delay_usecs for all but the last */
2875 if (i) {
2876 xfer->cs_change = false;
2877 xfer->delay_usecs = 0;
2878 }
2879 }
2880
2881 /* set up inserted */
2882 rxfer->inserted = insert;
2883
2884 /* and register it with spi_res/spi_message */
2885 spi_res_add(msg, rxfer);
2886
2887 return rxfer;
2888}
2889EXPORT_SYMBOL_GPL(spi_replace_transfers);
2890
2891static int __spi_split_transfer_maxsize(struct spi_controller *ctlr,
2892 struct spi_message *msg,
2893 struct spi_transfer **xferp,
2894 size_t maxsize,
2895 gfp_t gfp)
2896{
2897 struct spi_transfer *xfer = *xferp, *xfers;
2898 struct spi_replaced_transfers *srt;
2899 size_t offset;
2900 size_t count, i;
2901
2902 /* calculate how many we have to replace */
2903 count = DIV_ROUND_UP(xfer->len, maxsize);
2904
2905 /* create replacement */
2906 srt = spi_replace_transfers(msg, xfer, 1, count, NULL, 0, gfp);
2907 if (IS_ERR(srt))
2908 return PTR_ERR(srt);
2909 xfers = srt->inserted_transfers;
2910
2911 /* now handle each of those newly inserted spi_transfers
2912 * note that the replacements spi_transfers all are preset
2913 * to the same values as *xferp, so tx_buf, rx_buf and len
2914 * are all identical (as well as most others)
2915 * so we just have to fix up len and the pointers.
2916 *
2917 * this also includes support for the depreciated
2918 * spi_message.is_dma_mapped interface
2919 */
2920
2921 /* the first transfer just needs the length modified, so we
2922 * run it outside the loop
2923 */
2924 xfers[0].len = min_t(size_t, maxsize, xfer[0].len);
2925
2926 /* all the others need rx_buf/tx_buf also set */
2927 for (i = 1, offset = maxsize; i < count; offset += maxsize, i++) {
2928 /* update rx_buf, tx_buf and dma */
2929 if (xfers[i].rx_buf)
2930 xfers[i].rx_buf += offset;
2931 if (xfers[i].rx_dma)
2932 xfers[i].rx_dma += offset;
2933 if (xfers[i].tx_buf)
2934 xfers[i].tx_buf += offset;
2935 if (xfers[i].tx_dma)
2936 xfers[i].tx_dma += offset;
2937
2938 /* update length */
2939 xfers[i].len = min(maxsize, xfers[i].len - offset);
2940 }
2941
2942 /* we set up xferp to the last entry we have inserted,
2943 * so that we skip those already split transfers
2944 */
2945 *xferp = &xfers[count - 1];
2946
2947 /* increment statistics counters */
2948 SPI_STATISTICS_INCREMENT_FIELD(&ctlr->statistics,
2949 transfers_split_maxsize);
2950 SPI_STATISTICS_INCREMENT_FIELD(&msg->spi->statistics,
2951 transfers_split_maxsize);
2952
2953 return 0;
2954}
2955
2956/**
2957 * spi_split_tranfers_maxsize - split spi transfers into multiple transfers
2958 * when an individual transfer exceeds a
2959 * certain size
2960 * @ctlr: the @spi_controller for this transfer
2961 * @msg: the @spi_message to transform
2962 * @maxsize: the maximum when to apply this
2963 * @gfp: GFP allocation flags
2964 *
2965 * Return: status of transformation
2966 */
2967int spi_split_transfers_maxsize(struct spi_controller *ctlr,
2968 struct spi_message *msg,
2969 size_t maxsize,
2970 gfp_t gfp)
2971{
2972 struct spi_transfer *xfer;
2973 int ret;
2974
2975 /* iterate over the transfer_list,
2976 * but note that xfer is advanced to the last transfer inserted
2977 * to avoid checking sizes again unnecessarily (also xfer does
2978 * potentiall belong to a different list by the time the
2979 * replacement has happened
2980 */
2981 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
2982 if (xfer->len > maxsize) {
2983 ret = __spi_split_transfer_maxsize(ctlr, msg, &xfer,
2984 maxsize, gfp);
2985 if (ret)
2986 return ret;
2987 }
2988 }
2989
2990 return 0;
2991}
2992EXPORT_SYMBOL_GPL(spi_split_transfers_maxsize);
2993
2994/*-------------------------------------------------------------------------*/
2995
2996/* Core methods for SPI controller protocol drivers. Some of the
2997 * other core methods are currently defined as inline functions.
2998 */
2999
3000static int __spi_validate_bits_per_word(struct spi_controller *ctlr,
3001 u8 bits_per_word)
3002{
3003 if (ctlr->bits_per_word_mask) {
3004 /* Only 32 bits fit in the mask */
3005 if (bits_per_word > 32)
3006 return -EINVAL;
3007 if (!(ctlr->bits_per_word_mask & SPI_BPW_MASK(bits_per_word)))
3008 return -EINVAL;
3009 }
3010
3011 return 0;
3012}
3013
3014/**
3015 * spi_setup - setup SPI mode and clock rate
3016 * @spi: the device whose settings are being modified
3017 * Context: can sleep, and no requests are queued to the device
3018 *
3019 * SPI protocol drivers may need to update the transfer mode if the
3020 * device doesn't work with its default. They may likewise need
3021 * to update clock rates or word sizes from initial values. This function
3022 * changes those settings, and must be called from a context that can sleep.
3023 * Except for SPI_CS_HIGH, which takes effect immediately, the changes take
3024 * effect the next time the device is selected and data is transferred to
3025 * or from it. When this function returns, the spi device is deselected.
3026 *
3027 * Note that this call will fail if the protocol driver specifies an option
3028 * that the underlying controller or its driver does not support. For
3029 * example, not all hardware supports wire transfers using nine bit words,
3030 * LSB-first wire encoding, or active-high chipselects.
3031 *
3032 * Return: zero on success, else a negative error code.
3033 */
3034int spi_setup(struct spi_device *spi)
3035{
3036 unsigned bad_bits, ugly_bits;
3037 int status;
3038
3039 /* check mode to prevent that DUAL and QUAD set at the same time
3040 */
3041 if (((spi->mode & SPI_TX_DUAL) && (spi->mode & SPI_TX_QUAD)) ||
3042 ((spi->mode & SPI_RX_DUAL) && (spi->mode & SPI_RX_QUAD))) {
3043 dev_err(&spi->dev,
3044 "setup: can not select dual and quad at the same time\n");
3045 return -EINVAL;
3046 }
3047 /* if it is SPI_3WIRE mode, DUAL and QUAD should be forbidden
3048 */
3049 if ((spi->mode & SPI_3WIRE) && (spi->mode &
3050 (SPI_TX_DUAL | SPI_TX_QUAD | SPI_TX_OCTAL |
3051 SPI_RX_DUAL | SPI_RX_QUAD | SPI_RX_OCTAL)))
3052 return -EINVAL;
3053 /* help drivers fail *cleanly* when they need options
3054 * that aren't supported with their current controller
3055 * SPI_CS_WORD has a fallback software implementation,
3056 * so it is ignored here.
3057 */
3058 bad_bits = spi->mode & ~(spi->controller->mode_bits | SPI_CS_WORD);
3059 /* nothing prevents from working with active-high CS in case if it
3060 * is driven by GPIO.
3061 */
3062 if (gpio_is_valid(spi->cs_gpio))
3063 bad_bits &= ~SPI_CS_HIGH;
3064 ugly_bits = bad_bits &
3065 (SPI_TX_DUAL | SPI_TX_QUAD | SPI_TX_OCTAL |
3066 SPI_RX_DUAL | SPI_RX_QUAD | SPI_RX_OCTAL);
3067 if (ugly_bits) {
3068 dev_warn(&spi->dev,
3069 "setup: ignoring unsupported mode bits %x\n",
3070 ugly_bits);
3071 spi->mode &= ~ugly_bits;
3072 bad_bits &= ~ugly_bits;
3073 }
3074 if (bad_bits) {
3075 dev_err(&spi->dev, "setup: unsupported mode bits %x\n",
3076 bad_bits);
3077 return -EINVAL;
3078 }
3079
3080 if (!spi->bits_per_word)
3081 spi->bits_per_word = 8;
3082
3083 status = __spi_validate_bits_per_word(spi->controller,
3084 spi->bits_per_word);
3085 if (status)
3086 return status;
3087
3088 if (!spi->max_speed_hz)
3089 spi->max_speed_hz = spi->controller->max_speed_hz;
3090
3091 if (spi->controller->setup)
3092 status = spi->controller->setup(spi);
3093
3094 spi_set_cs(spi, false);
3095
3096 if (spi->rt && !spi->controller->rt) {
3097 spi->controller->rt = true;
3098 spi_set_thread_rt(spi->controller);
3099 }
3100
3101 dev_dbg(&spi->dev, "setup mode %d, %s%s%s%s%u bits/w, %u Hz max --> %d\n",
3102 (int) (spi->mode & (SPI_CPOL | SPI_CPHA)),
3103 (spi->mode & SPI_CS_HIGH) ? "cs_high, " : "",
3104 (spi->mode & SPI_LSB_FIRST) ? "lsb, " : "",
3105 (spi->mode & SPI_3WIRE) ? "3wire, " : "",
3106 (spi->mode & SPI_LOOP) ? "loopback, " : "",
3107 spi->bits_per_word, spi->max_speed_hz,
3108 status);
3109
3110 return status;
3111}
3112EXPORT_SYMBOL_GPL(spi_setup);
3113
3114/**
3115 * spi_set_cs_timing - configure CS setup, hold, and inactive delays
3116 * @spi: the device that requires specific CS timing configuration
3117 * @setup: CS setup time in terms of clock count
3118 * @hold: CS hold time in terms of clock count
3119 * @inactive_dly: CS inactive delay between transfers in terms of clock count
3120 */
3121void spi_set_cs_timing(struct spi_device *spi, u8 setup, u8 hold,
3122 u8 inactive_dly)
3123{
3124 if (spi->controller->set_cs_timing)
3125 spi->controller->set_cs_timing(spi, setup, hold, inactive_dly);
3126}
3127EXPORT_SYMBOL_GPL(spi_set_cs_timing);
3128
3129static int __spi_validate(struct spi_device *spi, struct spi_message *message)
3130{
3131 struct spi_controller *ctlr = spi->controller;
3132 struct spi_transfer *xfer;
3133 int w_size;
3134
3135 if (list_empty(&message->transfers))
3136 return -EINVAL;
3137
3138 /* If an SPI controller does not support toggling the CS line on each
3139 * transfer (indicated by the SPI_CS_WORD flag) or we are using a GPIO
3140 * for the CS line, we can emulate the CS-per-word hardware function by
3141 * splitting transfers into one-word transfers and ensuring that
3142 * cs_change is set for each transfer.
3143 */
3144 if ((spi->mode & SPI_CS_WORD) && (!(ctlr->mode_bits & SPI_CS_WORD) ||
3145 spi->cs_gpiod ||
3146 gpio_is_valid(spi->cs_gpio))) {
3147 size_t maxsize;
3148 int ret;
3149
3150 maxsize = (spi->bits_per_word + 7) / 8;
3151
3152 /* spi_split_transfers_maxsize() requires message->spi */
3153 message->spi = spi;
3154
3155 ret = spi_split_transfers_maxsize(ctlr, message, maxsize,
3156 GFP_KERNEL);
3157 if (ret)
3158 return ret;
3159
3160 list_for_each_entry(xfer, &message->transfers, transfer_list) {
3161 /* don't change cs_change on the last entry in the list */
3162 if (list_is_last(&xfer->transfer_list, &message->transfers))
3163 break;
3164 xfer->cs_change = 1;
3165 }
3166 }
3167
3168 /* Half-duplex links include original MicroWire, and ones with
3169 * only one data pin like SPI_3WIRE (switches direction) or where
3170 * either MOSI or MISO is missing. They can also be caused by
3171 * software limitations.
3172 */
3173 if ((ctlr->flags & SPI_CONTROLLER_HALF_DUPLEX) ||
3174 (spi->mode & SPI_3WIRE)) {
3175 unsigned flags = ctlr->flags;
3176
3177 list_for_each_entry(xfer, &message->transfers, transfer_list) {
3178 if (xfer->rx_buf && xfer->tx_buf)
3179 return -EINVAL;
3180 if ((flags & SPI_CONTROLLER_NO_TX) && xfer->tx_buf)
3181 return -EINVAL;
3182 if ((flags & SPI_CONTROLLER_NO_RX) && xfer->rx_buf)
3183 return -EINVAL;
3184 }
3185 }
3186
3187 /**
3188 * Set transfer bits_per_word and max speed as spi device default if
3189 * it is not set for this transfer.
3190 * Set transfer tx_nbits and rx_nbits as single transfer default
3191 * (SPI_NBITS_SINGLE) if it is not set for this transfer.
3192 * Ensure transfer word_delay is at least as long as that required by
3193 * device itself.
3194 */
3195 message->frame_length = 0;
3196 list_for_each_entry(xfer, &message->transfers, transfer_list) {
3197 xfer->effective_speed_hz = 0;
3198 message->frame_length += xfer->len;
3199 if (!xfer->bits_per_word)
3200 xfer->bits_per_word = spi->bits_per_word;
3201
3202 if (!xfer->speed_hz)
3203 xfer->speed_hz = spi->max_speed_hz;
3204
3205 if (ctlr->max_speed_hz && xfer->speed_hz > ctlr->max_speed_hz)
3206 xfer->speed_hz = ctlr->max_speed_hz;
3207
3208 if (__spi_validate_bits_per_word(ctlr, xfer->bits_per_word))
3209 return -EINVAL;
3210
3211 /*
3212 * SPI transfer length should be multiple of SPI word size
3213 * where SPI word size should be power-of-two multiple
3214 */
3215 if (xfer->bits_per_word <= 8)
3216 w_size = 1;
3217 else if (xfer->bits_per_word <= 16)
3218 w_size = 2;
3219 else
3220 w_size = 4;
3221
3222 /* No partial transfers accepted */
3223 if (xfer->len % w_size)
3224 return -EINVAL;
3225
3226 if (xfer->speed_hz && ctlr->min_speed_hz &&
3227 xfer->speed_hz < ctlr->min_speed_hz)
3228 return -EINVAL;
3229
3230 if (xfer->tx_buf && !xfer->tx_nbits)
3231 xfer->tx_nbits = SPI_NBITS_SINGLE;
3232 if (xfer->rx_buf && !xfer->rx_nbits)
3233 xfer->rx_nbits = SPI_NBITS_SINGLE;
3234 /* check transfer tx/rx_nbits:
3235 * 1. check the value matches one of single, dual and quad
3236 * 2. check tx/rx_nbits match the mode in spi_device
3237 */
3238 if (xfer->tx_buf) {
3239 if (xfer->tx_nbits != SPI_NBITS_SINGLE &&
3240 xfer->tx_nbits != SPI_NBITS_DUAL &&
3241 xfer->tx_nbits != SPI_NBITS_QUAD)
3242 return -EINVAL;
3243 if ((xfer->tx_nbits == SPI_NBITS_DUAL) &&
3244 !(spi->mode & (SPI_TX_DUAL | SPI_TX_QUAD)))
3245 return -EINVAL;
3246 if ((xfer->tx_nbits == SPI_NBITS_QUAD) &&
3247 !(spi->mode & SPI_TX_QUAD))
3248 return -EINVAL;
3249 }
3250 /* check transfer rx_nbits */
3251 if (xfer->rx_buf) {
3252 if (xfer->rx_nbits != SPI_NBITS_SINGLE &&
3253 xfer->rx_nbits != SPI_NBITS_DUAL &&
3254 xfer->rx_nbits != SPI_NBITS_QUAD)
3255 return -EINVAL;
3256 if ((xfer->rx_nbits == SPI_NBITS_DUAL) &&
3257 !(spi->mode & (SPI_RX_DUAL | SPI_RX_QUAD)))
3258 return -EINVAL;
3259 if ((xfer->rx_nbits == SPI_NBITS_QUAD) &&
3260 !(spi->mode & SPI_RX_QUAD))
3261 return -EINVAL;
3262 }
3263
3264 if (xfer->word_delay_usecs < spi->word_delay_usecs)
3265 xfer->word_delay_usecs = spi->word_delay_usecs;
3266 }
3267
3268 message->status = -EINPROGRESS;
3269
3270 return 0;
3271}
3272
3273static int __spi_async(struct spi_device *spi, struct spi_message *message)
3274{
3275 struct spi_controller *ctlr = spi->controller;
3276
3277 /*
3278 * Some controllers do not support doing regular SPI transfers. Return
3279 * ENOTSUPP when this is the case.
3280 */
3281 if (!ctlr->transfer)
3282 return -ENOTSUPP;
3283
3284 message->spi = spi;
3285
3286 SPI_STATISTICS_INCREMENT_FIELD(&ctlr->statistics, spi_async);
3287 SPI_STATISTICS_INCREMENT_FIELD(&spi->statistics, spi_async);
3288
3289 trace_spi_message_submit(message);
3290
3291 return ctlr->transfer(spi, message);
3292}
3293
3294/**
3295 * spi_async - asynchronous SPI transfer
3296 * @spi: device with which data will be exchanged
3297 * @message: describes the data transfers, including completion callback
3298 * Context: any (irqs may be blocked, etc)
3299 *
3300 * This call may be used in_irq and other contexts which can't sleep,
3301 * as well as from task contexts which can sleep.
3302 *
3303 * The completion callback is invoked in a context which can't sleep.
3304 * Before that invocation, the value of message->status is undefined.
3305 * When the callback is issued, message->status holds either zero (to
3306 * indicate complete success) or a negative error code. After that
3307 * callback returns, the driver which issued the transfer request may
3308 * deallocate the associated memory; it's no longer in use by any SPI
3309 * core or controller driver code.
3310 *
3311 * Note that although all messages to a spi_device are handled in
3312 * FIFO order, messages may go to different devices in other orders.
3313 * Some device might be higher priority, or have various "hard" access
3314 * time requirements, for example.
3315 *
3316 * On detection of any fault during the transfer, processing of
3317 * the entire message is aborted, and the device is deselected.
3318 * Until returning from the associated message completion callback,
3319 * no other spi_message queued to that device will be processed.
3320 * (This rule applies equally to all the synchronous transfer calls,
3321 * which are wrappers around this core asynchronous primitive.)
3322 *
3323 * Return: zero on success, else a negative error code.
3324 */
3325int spi_async(struct spi_device *spi, struct spi_message *message)
3326{
3327 struct spi_controller *ctlr = spi->controller;
3328 int ret;
3329 unsigned long flags;
3330
3331 ret = __spi_validate(spi, message);
3332 if (ret != 0)
3333 return ret;
3334
3335 spin_lock_irqsave(&ctlr->bus_lock_spinlock, flags);
3336
3337 if (ctlr->bus_lock_flag)
3338 ret = -EBUSY;
3339 else
3340 ret = __spi_async(spi, message);
3341
3342 spin_unlock_irqrestore(&ctlr->bus_lock_spinlock, flags);
3343
3344 return ret;
3345}
3346EXPORT_SYMBOL_GPL(spi_async);
3347
3348/**
3349 * spi_async_locked - version of spi_async with exclusive bus usage
3350 * @spi: device with which data will be exchanged
3351 * @message: describes the data transfers, including completion callback
3352 * Context: any (irqs may be blocked, etc)
3353 *
3354 * This call may be used in_irq and other contexts which can't sleep,
3355 * as well as from task contexts which can sleep.
3356 *
3357 * The completion callback is invoked in a context which can't sleep.
3358 * Before that invocation, the value of message->status is undefined.
3359 * When the callback is issued, message->status holds either zero (to
3360 * indicate complete success) or a negative error code. After that
3361 * callback returns, the driver which issued the transfer request may
3362 * deallocate the associated memory; it's no longer in use by any SPI
3363 * core or controller driver code.
3364 *
3365 * Note that although all messages to a spi_device are handled in
3366 * FIFO order, messages may go to different devices in other orders.
3367 * Some device might be higher priority, or have various "hard" access
3368 * time requirements, for example.
3369 *
3370 * On detection of any fault during the transfer, processing of
3371 * the entire message is aborted, and the device is deselected.
3372 * Until returning from the associated message completion callback,
3373 * no other spi_message queued to that device will be processed.
3374 * (This rule applies equally to all the synchronous transfer calls,
3375 * which are wrappers around this core asynchronous primitive.)
3376 *
3377 * Return: zero on success, else a negative error code.
3378 */
3379int spi_async_locked(struct spi_device *spi, struct spi_message *message)
3380{
3381 struct spi_controller *ctlr = spi->controller;
3382 int ret;
3383 unsigned long flags;
3384
3385 ret = __spi_validate(spi, message);
3386 if (ret != 0)
3387 return ret;
3388
3389 spin_lock_irqsave(&ctlr->bus_lock_spinlock, flags);
3390
3391 ret = __spi_async(spi, message);
3392
3393 spin_unlock_irqrestore(&ctlr->bus_lock_spinlock, flags);
3394
3395 return ret;
3396
3397}
3398EXPORT_SYMBOL_GPL(spi_async_locked);
3399
3400/*-------------------------------------------------------------------------*/
3401
3402/* Utility methods for SPI protocol drivers, layered on
3403 * top of the core. Some other utility methods are defined as
3404 * inline functions.
3405 */
3406
3407static void spi_complete(void *arg)
3408{
3409 complete(arg);
3410}
3411
3412static int __spi_sync(struct spi_device *spi, struct spi_message *message)
3413{
3414 DECLARE_COMPLETION_ONSTACK(done);
3415 int status;
3416 struct spi_controller *ctlr = spi->controller;
3417 unsigned long flags;
3418
3419 status = __spi_validate(spi, message);
3420 if (status != 0)
3421 return status;
3422
3423 message->complete = spi_complete;
3424 message->context = &done;
3425 message->spi = spi;
3426
3427 SPI_STATISTICS_INCREMENT_FIELD(&ctlr->statistics, spi_sync);
3428 SPI_STATISTICS_INCREMENT_FIELD(&spi->statistics, spi_sync);
3429
3430 /* If we're not using the legacy transfer method then we will
3431 * try to transfer in the calling context so special case.
3432 * This code would be less tricky if we could remove the
3433 * support for driver implemented message queues.
3434 */
3435 if (ctlr->transfer == spi_queued_transfer) {
3436 spin_lock_irqsave(&ctlr->bus_lock_spinlock, flags);
3437
3438 trace_spi_message_submit(message);
3439
3440 status = __spi_queued_transfer(spi, message, false);
3441
3442 spin_unlock_irqrestore(&ctlr->bus_lock_spinlock, flags);
3443 } else {
3444 status = spi_async_locked(spi, message);
3445 }
3446
3447 if (status == 0) {
3448 /* Push out the messages in the calling context if we
3449 * can.
3450 */
3451 if (ctlr->transfer == spi_queued_transfer) {
3452 SPI_STATISTICS_INCREMENT_FIELD(&ctlr->statistics,
3453 spi_sync_immediate);
3454 SPI_STATISTICS_INCREMENT_FIELD(&spi->statistics,
3455 spi_sync_immediate);
3456 __spi_pump_messages(ctlr, false);
3457 }
3458
3459 wait_for_completion(&done);
3460 status = message->status;
3461 }
3462 message->context = NULL;
3463 return status;
3464}
3465
3466/**
3467 * spi_sync - blocking/synchronous SPI data transfers
3468 * @spi: device with which data will be exchanged
3469 * @message: describes the data transfers
3470 * Context: can sleep
3471 *
3472 * This call may only be used from a context that may sleep. The sleep
3473 * is non-interruptible, and has no timeout. Low-overhead controller
3474 * drivers may DMA directly into and out of the message buffers.
3475 *
3476 * Note that the SPI device's chip select is active during the message,
3477 * and then is normally disabled between messages. Drivers for some
3478 * frequently-used devices may want to minimize costs of selecting a chip,
3479 * by leaving it selected in anticipation that the next message will go
3480 * to the same chip. (That may increase power usage.)
3481 *
3482 * Also, the caller is guaranteeing that the memory associated with the
3483 * message will not be freed before this call returns.
3484 *
3485 * Return: zero on success, else a negative error code.
3486 */
3487int spi_sync(struct spi_device *spi, struct spi_message *message)
3488{
3489 int ret;
3490
3491 mutex_lock(&spi->controller->bus_lock_mutex);
3492 ret = __spi_sync(spi, message);
3493 mutex_unlock(&spi->controller->bus_lock_mutex);
3494
3495 return ret;
3496}
3497EXPORT_SYMBOL_GPL(spi_sync);
3498
3499/**
3500 * spi_sync_locked - version of spi_sync with exclusive bus usage
3501 * @spi: device with which data will be exchanged
3502 * @message: describes the data transfers
3503 * Context: can sleep
3504 *
3505 * This call may only be used from a context that may sleep. The sleep
3506 * is non-interruptible, and has no timeout. Low-overhead controller
3507 * drivers may DMA directly into and out of the message buffers.
3508 *
3509 * This call should be used by drivers that require exclusive access to the
3510 * SPI bus. It has to be preceded by a spi_bus_lock call. The SPI bus must
3511 * be released by a spi_bus_unlock call when the exclusive access is over.
3512 *
3513 * Return: zero on success, else a negative error code.
3514 */
3515int spi_sync_locked(struct spi_device *spi, struct spi_message *message)
3516{
3517 return __spi_sync(spi, message);
3518}
3519EXPORT_SYMBOL_GPL(spi_sync_locked);
3520
3521/**
3522 * spi_bus_lock - obtain a lock for exclusive SPI bus usage
3523 * @ctlr: SPI bus master that should be locked for exclusive bus access
3524 * Context: can sleep
3525 *
3526 * This call may only be used from a context that may sleep. The sleep
3527 * is non-interruptible, and has no timeout.
3528 *
3529 * This call should be used by drivers that require exclusive access to the
3530 * SPI bus. The SPI bus must be released by a spi_bus_unlock call when the
3531 * exclusive access is over. Data transfer must be done by spi_sync_locked
3532 * and spi_async_locked calls when the SPI bus lock is held.
3533 *
3534 * Return: always zero.
3535 */
3536int spi_bus_lock(struct spi_controller *ctlr)
3537{
3538 unsigned long flags;
3539
3540 mutex_lock(&ctlr->bus_lock_mutex);
3541
3542 spin_lock_irqsave(&ctlr->bus_lock_spinlock, flags);
3543 ctlr->bus_lock_flag = 1;
3544 spin_unlock_irqrestore(&ctlr->bus_lock_spinlock, flags);
3545
3546 /* mutex remains locked until spi_bus_unlock is called */
3547
3548 return 0;
3549}
3550EXPORT_SYMBOL_GPL(spi_bus_lock);
3551
3552/**
3553 * spi_bus_unlock - release the lock for exclusive SPI bus usage
3554 * @ctlr: SPI bus master that was locked for exclusive bus access
3555 * Context: can sleep
3556 *
3557 * This call may only be used from a context that may sleep. The sleep
3558 * is non-interruptible, and has no timeout.
3559 *
3560 * This call releases an SPI bus lock previously obtained by an spi_bus_lock
3561 * call.
3562 *
3563 * Return: always zero.
3564 */
3565int spi_bus_unlock(struct spi_controller *ctlr)
3566{
3567 ctlr->bus_lock_flag = 0;
3568
3569 mutex_unlock(&ctlr->bus_lock_mutex);
3570
3571 return 0;
3572}
3573EXPORT_SYMBOL_GPL(spi_bus_unlock);
3574
3575/* portable code must never pass more than 32 bytes */
3576#define SPI_BUFSIZ max(32, SMP_CACHE_BYTES)
3577
3578static u8 *buf;
3579
3580/**
3581 * spi_write_then_read - SPI synchronous write followed by read
3582 * @spi: device with which data will be exchanged
3583 * @txbuf: data to be written (need not be dma-safe)
3584 * @n_tx: size of txbuf, in bytes
3585 * @rxbuf: buffer into which data will be read (need not be dma-safe)
3586 * @n_rx: size of rxbuf, in bytes
3587 * Context: can sleep
3588 *
3589 * This performs a half duplex MicroWire style transaction with the
3590 * device, sending txbuf and then reading rxbuf. The return value
3591 * is zero for success, else a negative errno status code.
3592 * This call may only be used from a context that may sleep.
3593 *
3594 * Parameters to this routine are always copied using a small buffer;
3595 * portable code should never use this for more than 32 bytes.
3596 * Performance-sensitive or bulk transfer code should instead use
3597 * spi_{async,sync}() calls with dma-safe buffers.
3598 *
3599 * Return: zero on success, else a negative error code.
3600 */
3601int spi_write_then_read(struct spi_device *spi,
3602 const void *txbuf, unsigned n_tx,
3603 void *rxbuf, unsigned n_rx)
3604{
3605 static DEFINE_MUTEX(lock);
3606
3607 int status;
3608 struct spi_message message;
3609 struct spi_transfer x[2];
3610 u8 *local_buf;
3611
3612 /* Use preallocated DMA-safe buffer if we can. We can't avoid
3613 * copying here, (as a pure convenience thing), but we can
3614 * keep heap costs out of the hot path unless someone else is
3615 * using the pre-allocated buffer or the transfer is too large.
3616 */
3617 if ((n_tx + n_rx) > SPI_BUFSIZ || !mutex_trylock(&lock)) {
3618 local_buf = kmalloc(max((unsigned)SPI_BUFSIZ, n_tx + n_rx),
3619 GFP_KERNEL | GFP_DMA);
3620 if (!local_buf)
3621 return -ENOMEM;
3622 } else {
3623 local_buf = buf;
3624 }
3625
3626 spi_message_init(&message);
3627 memset(x, 0, sizeof(x));
3628 if (n_tx) {
3629 x[0].len = n_tx;
3630 spi_message_add_tail(&x[0], &message);
3631 }
3632 if (n_rx) {
3633 x[1].len = n_rx;
3634 spi_message_add_tail(&x[1], &message);
3635 }
3636
3637 memcpy(local_buf, txbuf, n_tx);
3638 x[0].tx_buf = local_buf;
3639 x[1].rx_buf = local_buf + n_tx;
3640
3641 /* do the i/o */
3642 status = spi_sync(spi, &message);
3643 if (status == 0)
3644 memcpy(rxbuf, x[1].rx_buf, n_rx);
3645
3646 if (x[0].tx_buf == buf)
3647 mutex_unlock(&lock);
3648 else
3649 kfree(local_buf);
3650
3651 return status;
3652}
3653EXPORT_SYMBOL_GPL(spi_write_then_read);
3654
3655/*-------------------------------------------------------------------------*/
3656
3657#if IS_ENABLED(CONFIG_OF)
3658/* must call put_device() when done with returned spi_device device */
3659struct spi_device *of_find_spi_device_by_node(struct device_node *node)
3660{
3661 struct device *dev = bus_find_device_by_of_node(&spi_bus_type, node);
3662
3663 return dev ? to_spi_device(dev) : NULL;
3664}
3665EXPORT_SYMBOL_GPL(of_find_spi_device_by_node);
3666#endif /* IS_ENABLED(CONFIG_OF) */
3667
3668#if IS_ENABLED(CONFIG_OF_DYNAMIC)
3669/* the spi controllers are not using spi_bus, so we find it with another way */
3670static struct spi_controller *of_find_spi_controller_by_node(struct device_node *node)
3671{
3672 struct device *dev;
3673
3674 dev = class_find_device_by_of_node(&spi_master_class, node);
3675 if (!dev && IS_ENABLED(CONFIG_SPI_SLAVE))
3676 dev = class_find_device_by_of_node(&spi_slave_class, node);
3677 if (!dev)
3678 return NULL;
3679
3680 /* reference got in class_find_device */
3681 return container_of(dev, struct spi_controller, dev);
3682}
3683
3684static int of_spi_notify(struct notifier_block *nb, unsigned long action,
3685 void *arg)
3686{
3687 struct of_reconfig_data *rd = arg;
3688 struct spi_controller *ctlr;
3689 struct spi_device *spi;
3690
3691 switch (of_reconfig_get_state_change(action, arg)) {
3692 case OF_RECONFIG_CHANGE_ADD:
3693 ctlr = of_find_spi_controller_by_node(rd->dn->parent);
3694 if (ctlr == NULL)
3695 return NOTIFY_OK; /* not for us */
3696
3697 if (of_node_test_and_set_flag(rd->dn, OF_POPULATED)) {
3698 put_device(&ctlr->dev);
3699 return NOTIFY_OK;
3700 }
3701
3702 spi = of_register_spi_device(ctlr, rd->dn);
3703 put_device(&ctlr->dev);
3704
3705 if (IS_ERR(spi)) {
3706 pr_err("%s: failed to create for '%pOF'\n",
3707 __func__, rd->dn);
3708 of_node_clear_flag(rd->dn, OF_POPULATED);
3709 return notifier_from_errno(PTR_ERR(spi));
3710 }
3711 break;
3712
3713 case OF_RECONFIG_CHANGE_REMOVE:
3714 /* already depopulated? */
3715 if (!of_node_check_flag(rd->dn, OF_POPULATED))
3716 return NOTIFY_OK;
3717
3718 /* find our device by node */
3719 spi = of_find_spi_device_by_node(rd->dn);
3720 if (spi == NULL)
3721 return NOTIFY_OK; /* no? not meant for us */
3722
3723 /* unregister takes one ref away */
3724 spi_unregister_device(spi);
3725
3726 /* and put the reference of the find */
3727 put_device(&spi->dev);
3728 break;
3729 }
3730
3731 return NOTIFY_OK;
3732}
3733
3734static struct notifier_block spi_of_notifier = {
3735 .notifier_call = of_spi_notify,
3736};
3737#else /* IS_ENABLED(CONFIG_OF_DYNAMIC) */
3738extern struct notifier_block spi_of_notifier;
3739#endif /* IS_ENABLED(CONFIG_OF_DYNAMIC) */
3740
3741#if IS_ENABLED(CONFIG_ACPI)
3742static int spi_acpi_controller_match(struct device *dev, const void *data)
3743{
3744 return ACPI_COMPANION(dev->parent) == data;
3745}
3746
3747static struct spi_controller *acpi_spi_find_controller_by_adev(struct acpi_device *adev)
3748{
3749 struct device *dev;
3750
3751 dev = class_find_device(&spi_master_class, NULL, adev,
3752 spi_acpi_controller_match);
3753 if (!dev && IS_ENABLED(CONFIG_SPI_SLAVE))
3754 dev = class_find_device(&spi_slave_class, NULL, adev,
3755 spi_acpi_controller_match);
3756 if (!dev)
3757 return NULL;
3758
3759 return container_of(dev, struct spi_controller, dev);
3760}
3761
3762static struct spi_device *acpi_spi_find_device_by_adev(struct acpi_device *adev)
3763{
3764 struct device *dev;
3765
3766 dev = bus_find_device_by_acpi_dev(&spi_bus_type, adev);
3767 return dev ? to_spi_device(dev) : NULL;
3768}
3769
3770static int acpi_spi_notify(struct notifier_block *nb, unsigned long value,
3771 void *arg)
3772{
3773 struct acpi_device *adev = arg;
3774 struct spi_controller *ctlr;
3775 struct spi_device *spi;
3776
3777 switch (value) {
3778 case ACPI_RECONFIG_DEVICE_ADD:
3779 ctlr = acpi_spi_find_controller_by_adev(adev->parent);
3780 if (!ctlr)
3781 break;
3782
3783 acpi_register_spi_device(ctlr, adev);
3784 put_device(&ctlr->dev);
3785 break;
3786 case ACPI_RECONFIG_DEVICE_REMOVE:
3787 if (!acpi_device_enumerated(adev))
3788 break;
3789
3790 spi = acpi_spi_find_device_by_adev(adev);
3791 if (!spi)
3792 break;
3793
3794 spi_unregister_device(spi);
3795 put_device(&spi->dev);
3796 break;
3797 }
3798
3799 return NOTIFY_OK;
3800}
3801
3802static struct notifier_block spi_acpi_notifier = {
3803 .notifier_call = acpi_spi_notify,
3804};
3805#else
3806extern struct notifier_block spi_acpi_notifier;
3807#endif
3808
3809static int __init spi_init(void)
3810{
3811 int status;
3812
3813 buf = kmalloc(SPI_BUFSIZ, GFP_KERNEL);
3814 if (!buf) {
3815 status = -ENOMEM;
3816 goto err0;
3817 }
3818
3819 status = bus_register(&spi_bus_type);
3820 if (status < 0)
3821 goto err1;
3822
3823 status = class_register(&spi_master_class);
3824 if (status < 0)
3825 goto err2;
3826
3827 if (IS_ENABLED(CONFIG_SPI_SLAVE)) {
3828 status = class_register(&spi_slave_class);
3829 if (status < 0)
3830 goto err3;
3831 }
3832
3833 if (IS_ENABLED(CONFIG_OF_DYNAMIC))
3834 WARN_ON(of_reconfig_notifier_register(&spi_of_notifier));
3835 if (IS_ENABLED(CONFIG_ACPI))
3836 WARN_ON(acpi_reconfig_notifier_register(&spi_acpi_notifier));
3837
3838 return 0;
3839
3840err3:
3841 class_unregister(&spi_master_class);
3842err2:
3843 bus_unregister(&spi_bus_type);
3844err1:
3845 kfree(buf);
3846 buf = NULL;
3847err0:
3848 return status;
3849}
3850
3851/* board_info is normally registered in arch_initcall(),
3852 * but even essential drivers wait till later
3853 *
3854 * REVISIT only boardinfo really needs static linking. the rest (device and
3855 * driver registration) _could_ be dynamically linked (modular) ... costs
3856 * include needing to have boardinfo data structures be much more public.
3857 */
3858postcore_initcall(spi_init);
1/*
2 * SPI init/core code
3 *
4 * Copyright (C) 2005 David Brownell
5 * Copyright (C) 2008 Secret Lab Technologies Ltd.
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 */
17
18#include <linux/kernel.h>
19#include <linux/device.h>
20#include <linux/init.h>
21#include <linux/cache.h>
22#include <linux/dma-mapping.h>
23#include <linux/dmaengine.h>
24#include <linux/mutex.h>
25#include <linux/of_device.h>
26#include <linux/of_irq.h>
27#include <linux/clk/clk-conf.h>
28#include <linux/slab.h>
29#include <linux/mod_devicetable.h>
30#include <linux/spi/spi.h>
31#include <linux/of_gpio.h>
32#include <linux/pm_runtime.h>
33#include <linux/pm_domain.h>
34#include <linux/export.h>
35#include <linux/sched/rt.h>
36#include <linux/delay.h>
37#include <linux/kthread.h>
38#include <linux/ioport.h>
39#include <linux/acpi.h>
40#include <linux/highmem.h>
41
42#define CREATE_TRACE_POINTS
43#include <trace/events/spi.h>
44
45static void spidev_release(struct device *dev)
46{
47 struct spi_device *spi = to_spi_device(dev);
48
49 /* spi masters may cleanup for released devices */
50 if (spi->master->cleanup)
51 spi->master->cleanup(spi);
52
53 spi_master_put(spi->master);
54 kfree(spi);
55}
56
57static ssize_t
58modalias_show(struct device *dev, struct device_attribute *a, char *buf)
59{
60 const struct spi_device *spi = to_spi_device(dev);
61 int len;
62
63 len = acpi_device_modalias(dev, buf, PAGE_SIZE - 1);
64 if (len != -ENODEV)
65 return len;
66
67 return sprintf(buf, "%s%s\n", SPI_MODULE_PREFIX, spi->modalias);
68}
69static DEVICE_ATTR_RO(modalias);
70
71#define SPI_STATISTICS_ATTRS(field, file) \
72static ssize_t spi_master_##field##_show(struct device *dev, \
73 struct device_attribute *attr, \
74 char *buf) \
75{ \
76 struct spi_master *master = container_of(dev, \
77 struct spi_master, dev); \
78 return spi_statistics_##field##_show(&master->statistics, buf); \
79} \
80static struct device_attribute dev_attr_spi_master_##field = { \
81 .attr = { .name = file, .mode = S_IRUGO }, \
82 .show = spi_master_##field##_show, \
83}; \
84static ssize_t spi_device_##field##_show(struct device *dev, \
85 struct device_attribute *attr, \
86 char *buf) \
87{ \
88 struct spi_device *spi = to_spi_device(dev); \
89 return spi_statistics_##field##_show(&spi->statistics, buf); \
90} \
91static struct device_attribute dev_attr_spi_device_##field = { \
92 .attr = { .name = file, .mode = S_IRUGO }, \
93 .show = spi_device_##field##_show, \
94}
95
96#define SPI_STATISTICS_SHOW_NAME(name, file, field, format_string) \
97static ssize_t spi_statistics_##name##_show(struct spi_statistics *stat, \
98 char *buf) \
99{ \
100 unsigned long flags; \
101 ssize_t len; \
102 spin_lock_irqsave(&stat->lock, flags); \
103 len = sprintf(buf, format_string, stat->field); \
104 spin_unlock_irqrestore(&stat->lock, flags); \
105 return len; \
106} \
107SPI_STATISTICS_ATTRS(name, file)
108
109#define SPI_STATISTICS_SHOW(field, format_string) \
110 SPI_STATISTICS_SHOW_NAME(field, __stringify(field), \
111 field, format_string)
112
113SPI_STATISTICS_SHOW(messages, "%lu");
114SPI_STATISTICS_SHOW(transfers, "%lu");
115SPI_STATISTICS_SHOW(errors, "%lu");
116SPI_STATISTICS_SHOW(timedout, "%lu");
117
118SPI_STATISTICS_SHOW(spi_sync, "%lu");
119SPI_STATISTICS_SHOW(spi_sync_immediate, "%lu");
120SPI_STATISTICS_SHOW(spi_async, "%lu");
121
122SPI_STATISTICS_SHOW(bytes, "%llu");
123SPI_STATISTICS_SHOW(bytes_rx, "%llu");
124SPI_STATISTICS_SHOW(bytes_tx, "%llu");
125
126#define SPI_STATISTICS_TRANSFER_BYTES_HISTO(index, number) \
127 SPI_STATISTICS_SHOW_NAME(transfer_bytes_histo##index, \
128 "transfer_bytes_histo_" number, \
129 transfer_bytes_histo[index], "%lu")
130SPI_STATISTICS_TRANSFER_BYTES_HISTO(0, "0-1");
131SPI_STATISTICS_TRANSFER_BYTES_HISTO(1, "2-3");
132SPI_STATISTICS_TRANSFER_BYTES_HISTO(2, "4-7");
133SPI_STATISTICS_TRANSFER_BYTES_HISTO(3, "8-15");
134SPI_STATISTICS_TRANSFER_BYTES_HISTO(4, "16-31");
135SPI_STATISTICS_TRANSFER_BYTES_HISTO(5, "32-63");
136SPI_STATISTICS_TRANSFER_BYTES_HISTO(6, "64-127");
137SPI_STATISTICS_TRANSFER_BYTES_HISTO(7, "128-255");
138SPI_STATISTICS_TRANSFER_BYTES_HISTO(8, "256-511");
139SPI_STATISTICS_TRANSFER_BYTES_HISTO(9, "512-1023");
140SPI_STATISTICS_TRANSFER_BYTES_HISTO(10, "1024-2047");
141SPI_STATISTICS_TRANSFER_BYTES_HISTO(11, "2048-4095");
142SPI_STATISTICS_TRANSFER_BYTES_HISTO(12, "4096-8191");
143SPI_STATISTICS_TRANSFER_BYTES_HISTO(13, "8192-16383");
144SPI_STATISTICS_TRANSFER_BYTES_HISTO(14, "16384-32767");
145SPI_STATISTICS_TRANSFER_BYTES_HISTO(15, "32768-65535");
146SPI_STATISTICS_TRANSFER_BYTES_HISTO(16, "65536+");
147
148SPI_STATISTICS_SHOW(transfers_split_maxsize, "%lu");
149
150static struct attribute *spi_dev_attrs[] = {
151 &dev_attr_modalias.attr,
152 NULL,
153};
154
155static const struct attribute_group spi_dev_group = {
156 .attrs = spi_dev_attrs,
157};
158
159static struct attribute *spi_device_statistics_attrs[] = {
160 &dev_attr_spi_device_messages.attr,
161 &dev_attr_spi_device_transfers.attr,
162 &dev_attr_spi_device_errors.attr,
163 &dev_attr_spi_device_timedout.attr,
164 &dev_attr_spi_device_spi_sync.attr,
165 &dev_attr_spi_device_spi_sync_immediate.attr,
166 &dev_attr_spi_device_spi_async.attr,
167 &dev_attr_spi_device_bytes.attr,
168 &dev_attr_spi_device_bytes_rx.attr,
169 &dev_attr_spi_device_bytes_tx.attr,
170 &dev_attr_spi_device_transfer_bytes_histo0.attr,
171 &dev_attr_spi_device_transfer_bytes_histo1.attr,
172 &dev_attr_spi_device_transfer_bytes_histo2.attr,
173 &dev_attr_spi_device_transfer_bytes_histo3.attr,
174 &dev_attr_spi_device_transfer_bytes_histo4.attr,
175 &dev_attr_spi_device_transfer_bytes_histo5.attr,
176 &dev_attr_spi_device_transfer_bytes_histo6.attr,
177 &dev_attr_spi_device_transfer_bytes_histo7.attr,
178 &dev_attr_spi_device_transfer_bytes_histo8.attr,
179 &dev_attr_spi_device_transfer_bytes_histo9.attr,
180 &dev_attr_spi_device_transfer_bytes_histo10.attr,
181 &dev_attr_spi_device_transfer_bytes_histo11.attr,
182 &dev_attr_spi_device_transfer_bytes_histo12.attr,
183 &dev_attr_spi_device_transfer_bytes_histo13.attr,
184 &dev_attr_spi_device_transfer_bytes_histo14.attr,
185 &dev_attr_spi_device_transfer_bytes_histo15.attr,
186 &dev_attr_spi_device_transfer_bytes_histo16.attr,
187 &dev_attr_spi_device_transfers_split_maxsize.attr,
188 NULL,
189};
190
191static const struct attribute_group spi_device_statistics_group = {
192 .name = "statistics",
193 .attrs = spi_device_statistics_attrs,
194};
195
196static const struct attribute_group *spi_dev_groups[] = {
197 &spi_dev_group,
198 &spi_device_statistics_group,
199 NULL,
200};
201
202static struct attribute *spi_master_statistics_attrs[] = {
203 &dev_attr_spi_master_messages.attr,
204 &dev_attr_spi_master_transfers.attr,
205 &dev_attr_spi_master_errors.attr,
206 &dev_attr_spi_master_timedout.attr,
207 &dev_attr_spi_master_spi_sync.attr,
208 &dev_attr_spi_master_spi_sync_immediate.attr,
209 &dev_attr_spi_master_spi_async.attr,
210 &dev_attr_spi_master_bytes.attr,
211 &dev_attr_spi_master_bytes_rx.attr,
212 &dev_attr_spi_master_bytes_tx.attr,
213 &dev_attr_spi_master_transfer_bytes_histo0.attr,
214 &dev_attr_spi_master_transfer_bytes_histo1.attr,
215 &dev_attr_spi_master_transfer_bytes_histo2.attr,
216 &dev_attr_spi_master_transfer_bytes_histo3.attr,
217 &dev_attr_spi_master_transfer_bytes_histo4.attr,
218 &dev_attr_spi_master_transfer_bytes_histo5.attr,
219 &dev_attr_spi_master_transfer_bytes_histo6.attr,
220 &dev_attr_spi_master_transfer_bytes_histo7.attr,
221 &dev_attr_spi_master_transfer_bytes_histo8.attr,
222 &dev_attr_spi_master_transfer_bytes_histo9.attr,
223 &dev_attr_spi_master_transfer_bytes_histo10.attr,
224 &dev_attr_spi_master_transfer_bytes_histo11.attr,
225 &dev_attr_spi_master_transfer_bytes_histo12.attr,
226 &dev_attr_spi_master_transfer_bytes_histo13.attr,
227 &dev_attr_spi_master_transfer_bytes_histo14.attr,
228 &dev_attr_spi_master_transfer_bytes_histo15.attr,
229 &dev_attr_spi_master_transfer_bytes_histo16.attr,
230 &dev_attr_spi_master_transfers_split_maxsize.attr,
231 NULL,
232};
233
234static const struct attribute_group spi_master_statistics_group = {
235 .name = "statistics",
236 .attrs = spi_master_statistics_attrs,
237};
238
239static const struct attribute_group *spi_master_groups[] = {
240 &spi_master_statistics_group,
241 NULL,
242};
243
244void spi_statistics_add_transfer_stats(struct spi_statistics *stats,
245 struct spi_transfer *xfer,
246 struct spi_master *master)
247{
248 unsigned long flags;
249 int l2len = min(fls(xfer->len), SPI_STATISTICS_HISTO_SIZE) - 1;
250
251 if (l2len < 0)
252 l2len = 0;
253
254 spin_lock_irqsave(&stats->lock, flags);
255
256 stats->transfers++;
257 stats->transfer_bytes_histo[l2len]++;
258
259 stats->bytes += xfer->len;
260 if ((xfer->tx_buf) &&
261 (xfer->tx_buf != master->dummy_tx))
262 stats->bytes_tx += xfer->len;
263 if ((xfer->rx_buf) &&
264 (xfer->rx_buf != master->dummy_rx))
265 stats->bytes_rx += xfer->len;
266
267 spin_unlock_irqrestore(&stats->lock, flags);
268}
269EXPORT_SYMBOL_GPL(spi_statistics_add_transfer_stats);
270
271/* modalias support makes "modprobe $MODALIAS" new-style hotplug work,
272 * and the sysfs version makes coldplug work too.
273 */
274
275static const struct spi_device_id *spi_match_id(const struct spi_device_id *id,
276 const struct spi_device *sdev)
277{
278 while (id->name[0]) {
279 if (!strcmp(sdev->modalias, id->name))
280 return id;
281 id++;
282 }
283 return NULL;
284}
285
286const struct spi_device_id *spi_get_device_id(const struct spi_device *sdev)
287{
288 const struct spi_driver *sdrv = to_spi_driver(sdev->dev.driver);
289
290 return spi_match_id(sdrv->id_table, sdev);
291}
292EXPORT_SYMBOL_GPL(spi_get_device_id);
293
294static int spi_match_device(struct device *dev, struct device_driver *drv)
295{
296 const struct spi_device *spi = to_spi_device(dev);
297 const struct spi_driver *sdrv = to_spi_driver(drv);
298
299 /* Attempt an OF style match */
300 if (of_driver_match_device(dev, drv))
301 return 1;
302
303 /* Then try ACPI */
304 if (acpi_driver_match_device(dev, drv))
305 return 1;
306
307 if (sdrv->id_table)
308 return !!spi_match_id(sdrv->id_table, spi);
309
310 return strcmp(spi->modalias, drv->name) == 0;
311}
312
313static int spi_uevent(struct device *dev, struct kobj_uevent_env *env)
314{
315 const struct spi_device *spi = to_spi_device(dev);
316 int rc;
317
318 rc = acpi_device_uevent_modalias(dev, env);
319 if (rc != -ENODEV)
320 return rc;
321
322 add_uevent_var(env, "MODALIAS=%s%s", SPI_MODULE_PREFIX, spi->modalias);
323 return 0;
324}
325
326struct bus_type spi_bus_type = {
327 .name = "spi",
328 .dev_groups = spi_dev_groups,
329 .match = spi_match_device,
330 .uevent = spi_uevent,
331};
332EXPORT_SYMBOL_GPL(spi_bus_type);
333
334
335static int spi_drv_probe(struct device *dev)
336{
337 const struct spi_driver *sdrv = to_spi_driver(dev->driver);
338 struct spi_device *spi = to_spi_device(dev);
339 int ret;
340
341 ret = of_clk_set_defaults(dev->of_node, false);
342 if (ret)
343 return ret;
344
345 if (dev->of_node) {
346 spi->irq = of_irq_get(dev->of_node, 0);
347 if (spi->irq == -EPROBE_DEFER)
348 return -EPROBE_DEFER;
349 if (spi->irq < 0)
350 spi->irq = 0;
351 }
352
353 ret = dev_pm_domain_attach(dev, true);
354 if (ret != -EPROBE_DEFER) {
355 ret = sdrv->probe(spi);
356 if (ret)
357 dev_pm_domain_detach(dev, true);
358 }
359
360 return ret;
361}
362
363static int spi_drv_remove(struct device *dev)
364{
365 const struct spi_driver *sdrv = to_spi_driver(dev->driver);
366 int ret;
367
368 ret = sdrv->remove(to_spi_device(dev));
369 dev_pm_domain_detach(dev, true);
370
371 return ret;
372}
373
374static void spi_drv_shutdown(struct device *dev)
375{
376 const struct spi_driver *sdrv = to_spi_driver(dev->driver);
377
378 sdrv->shutdown(to_spi_device(dev));
379}
380
381/**
382 * __spi_register_driver - register a SPI driver
383 * @owner: owner module of the driver to register
384 * @sdrv: the driver to register
385 * Context: can sleep
386 *
387 * Return: zero on success, else a negative error code.
388 */
389int __spi_register_driver(struct module *owner, struct spi_driver *sdrv)
390{
391 sdrv->driver.owner = owner;
392 sdrv->driver.bus = &spi_bus_type;
393 if (sdrv->probe)
394 sdrv->driver.probe = spi_drv_probe;
395 if (sdrv->remove)
396 sdrv->driver.remove = spi_drv_remove;
397 if (sdrv->shutdown)
398 sdrv->driver.shutdown = spi_drv_shutdown;
399 return driver_register(&sdrv->driver);
400}
401EXPORT_SYMBOL_GPL(__spi_register_driver);
402
403/*-------------------------------------------------------------------------*/
404
405/* SPI devices should normally not be created by SPI device drivers; that
406 * would make them board-specific. Similarly with SPI master drivers.
407 * Device registration normally goes into like arch/.../mach.../board-YYY.c
408 * with other readonly (flashable) information about mainboard devices.
409 */
410
411struct boardinfo {
412 struct list_head list;
413 struct spi_board_info board_info;
414};
415
416static LIST_HEAD(board_list);
417static LIST_HEAD(spi_master_list);
418
419/*
420 * Used to protect add/del opertion for board_info list and
421 * spi_master list, and their matching process
422 */
423static DEFINE_MUTEX(board_lock);
424
425/**
426 * spi_alloc_device - Allocate a new SPI device
427 * @master: Controller to which device is connected
428 * Context: can sleep
429 *
430 * Allows a driver to allocate and initialize a spi_device without
431 * registering it immediately. This allows a driver to directly
432 * fill the spi_device with device parameters before calling
433 * spi_add_device() on it.
434 *
435 * Caller is responsible to call spi_add_device() on the returned
436 * spi_device structure to add it to the SPI master. If the caller
437 * needs to discard the spi_device without adding it, then it should
438 * call spi_dev_put() on it.
439 *
440 * Return: a pointer to the new device, or NULL.
441 */
442struct spi_device *spi_alloc_device(struct spi_master *master)
443{
444 struct spi_device *spi;
445
446 if (!spi_master_get(master))
447 return NULL;
448
449 spi = kzalloc(sizeof(*spi), GFP_KERNEL);
450 if (!spi) {
451 spi_master_put(master);
452 return NULL;
453 }
454
455 spi->master = master;
456 spi->dev.parent = &master->dev;
457 spi->dev.bus = &spi_bus_type;
458 spi->dev.release = spidev_release;
459 spi->cs_gpio = -ENOENT;
460
461 spin_lock_init(&spi->statistics.lock);
462
463 device_initialize(&spi->dev);
464 return spi;
465}
466EXPORT_SYMBOL_GPL(spi_alloc_device);
467
468static void spi_dev_set_name(struct spi_device *spi)
469{
470 struct acpi_device *adev = ACPI_COMPANION(&spi->dev);
471
472 if (adev) {
473 dev_set_name(&spi->dev, "spi-%s", acpi_dev_name(adev));
474 return;
475 }
476
477 dev_set_name(&spi->dev, "%s.%u", dev_name(&spi->master->dev),
478 spi->chip_select);
479}
480
481static int spi_dev_check(struct device *dev, void *data)
482{
483 struct spi_device *spi = to_spi_device(dev);
484 struct spi_device *new_spi = data;
485
486 if (spi->master == new_spi->master &&
487 spi->chip_select == new_spi->chip_select)
488 return -EBUSY;
489 return 0;
490}
491
492/**
493 * spi_add_device - Add spi_device allocated with spi_alloc_device
494 * @spi: spi_device to register
495 *
496 * Companion function to spi_alloc_device. Devices allocated with
497 * spi_alloc_device can be added onto the spi bus with this function.
498 *
499 * Return: 0 on success; negative errno on failure
500 */
501int spi_add_device(struct spi_device *spi)
502{
503 static DEFINE_MUTEX(spi_add_lock);
504 struct spi_master *master = spi->master;
505 struct device *dev = master->dev.parent;
506 int status;
507
508 /* Chipselects are numbered 0..max; validate. */
509 if (spi->chip_select >= master->num_chipselect) {
510 dev_err(dev, "cs%d >= max %d\n",
511 spi->chip_select,
512 master->num_chipselect);
513 return -EINVAL;
514 }
515
516 /* Set the bus ID string */
517 spi_dev_set_name(spi);
518
519 /* We need to make sure there's no other device with this
520 * chipselect **BEFORE** we call setup(), else we'll trash
521 * its configuration. Lock against concurrent add() calls.
522 */
523 mutex_lock(&spi_add_lock);
524
525 status = bus_for_each_dev(&spi_bus_type, NULL, spi, spi_dev_check);
526 if (status) {
527 dev_err(dev, "chipselect %d already in use\n",
528 spi->chip_select);
529 goto done;
530 }
531
532 if (master->cs_gpios)
533 spi->cs_gpio = master->cs_gpios[spi->chip_select];
534
535 /* Drivers may modify this initial i/o setup, but will
536 * normally rely on the device being setup. Devices
537 * using SPI_CS_HIGH can't coexist well otherwise...
538 */
539 status = spi_setup(spi);
540 if (status < 0) {
541 dev_err(dev, "can't setup %s, status %d\n",
542 dev_name(&spi->dev), status);
543 goto done;
544 }
545
546 /* Device may be bound to an active driver when this returns */
547 status = device_add(&spi->dev);
548 if (status < 0)
549 dev_err(dev, "can't add %s, status %d\n",
550 dev_name(&spi->dev), status);
551 else
552 dev_dbg(dev, "registered child %s\n", dev_name(&spi->dev));
553
554done:
555 mutex_unlock(&spi_add_lock);
556 return status;
557}
558EXPORT_SYMBOL_GPL(spi_add_device);
559
560/**
561 * spi_new_device - instantiate one new SPI device
562 * @master: Controller to which device is connected
563 * @chip: Describes the SPI device
564 * Context: can sleep
565 *
566 * On typical mainboards, this is purely internal; and it's not needed
567 * after board init creates the hard-wired devices. Some development
568 * platforms may not be able to use spi_register_board_info though, and
569 * this is exported so that for example a USB or parport based adapter
570 * driver could add devices (which it would learn about out-of-band).
571 *
572 * Return: the new device, or NULL.
573 */
574struct spi_device *spi_new_device(struct spi_master *master,
575 struct spi_board_info *chip)
576{
577 struct spi_device *proxy;
578 int status;
579
580 /* NOTE: caller did any chip->bus_num checks necessary.
581 *
582 * Also, unless we change the return value convention to use
583 * error-or-pointer (not NULL-or-pointer), troubleshootability
584 * suggests syslogged diagnostics are best here (ugh).
585 */
586
587 proxy = spi_alloc_device(master);
588 if (!proxy)
589 return NULL;
590
591 WARN_ON(strlen(chip->modalias) >= sizeof(proxy->modalias));
592
593 proxy->chip_select = chip->chip_select;
594 proxy->max_speed_hz = chip->max_speed_hz;
595 proxy->mode = chip->mode;
596 proxy->irq = chip->irq;
597 strlcpy(proxy->modalias, chip->modalias, sizeof(proxy->modalias));
598 proxy->dev.platform_data = (void *) chip->platform_data;
599 proxy->controller_data = chip->controller_data;
600 proxy->controller_state = NULL;
601
602 status = spi_add_device(proxy);
603 if (status < 0) {
604 spi_dev_put(proxy);
605 return NULL;
606 }
607
608 return proxy;
609}
610EXPORT_SYMBOL_GPL(spi_new_device);
611
612/**
613 * spi_unregister_device - unregister a single SPI device
614 * @spi: spi_device to unregister
615 *
616 * Start making the passed SPI device vanish. Normally this would be handled
617 * by spi_unregister_master().
618 */
619void spi_unregister_device(struct spi_device *spi)
620{
621 if (!spi)
622 return;
623
624 if (spi->dev.of_node)
625 of_node_clear_flag(spi->dev.of_node, OF_POPULATED);
626 if (ACPI_COMPANION(&spi->dev))
627 acpi_device_clear_enumerated(ACPI_COMPANION(&spi->dev));
628 device_unregister(&spi->dev);
629}
630EXPORT_SYMBOL_GPL(spi_unregister_device);
631
632static void spi_match_master_to_boardinfo(struct spi_master *master,
633 struct spi_board_info *bi)
634{
635 struct spi_device *dev;
636
637 if (master->bus_num != bi->bus_num)
638 return;
639
640 dev = spi_new_device(master, bi);
641 if (!dev)
642 dev_err(master->dev.parent, "can't create new device for %s\n",
643 bi->modalias);
644}
645
646/**
647 * spi_register_board_info - register SPI devices for a given board
648 * @info: array of chip descriptors
649 * @n: how many descriptors are provided
650 * Context: can sleep
651 *
652 * Board-specific early init code calls this (probably during arch_initcall)
653 * with segments of the SPI device table. Any device nodes are created later,
654 * after the relevant parent SPI controller (bus_num) is defined. We keep
655 * this table of devices forever, so that reloading a controller driver will
656 * not make Linux forget about these hard-wired devices.
657 *
658 * Other code can also call this, e.g. a particular add-on board might provide
659 * SPI devices through its expansion connector, so code initializing that board
660 * would naturally declare its SPI devices.
661 *
662 * The board info passed can safely be __initdata ... but be careful of
663 * any embedded pointers (platform_data, etc), they're copied as-is.
664 *
665 * Return: zero on success, else a negative error code.
666 */
667int spi_register_board_info(struct spi_board_info const *info, unsigned n)
668{
669 struct boardinfo *bi;
670 int i;
671
672 if (!n)
673 return -EINVAL;
674
675 bi = kzalloc(n * sizeof(*bi), GFP_KERNEL);
676 if (!bi)
677 return -ENOMEM;
678
679 for (i = 0; i < n; i++, bi++, info++) {
680 struct spi_master *master;
681
682 memcpy(&bi->board_info, info, sizeof(*info));
683 mutex_lock(&board_lock);
684 list_add_tail(&bi->list, &board_list);
685 list_for_each_entry(master, &spi_master_list, list)
686 spi_match_master_to_boardinfo(master, &bi->board_info);
687 mutex_unlock(&board_lock);
688 }
689
690 return 0;
691}
692
693/*-------------------------------------------------------------------------*/
694
695static void spi_set_cs(struct spi_device *spi, bool enable)
696{
697 if (spi->mode & SPI_CS_HIGH)
698 enable = !enable;
699
700 if (gpio_is_valid(spi->cs_gpio)) {
701 gpio_set_value(spi->cs_gpio, !enable);
702 /* Some SPI masters need both GPIO CS & slave_select */
703 if ((spi->master->flags & SPI_MASTER_GPIO_SS) &&
704 spi->master->set_cs)
705 spi->master->set_cs(spi, !enable);
706 } else if (spi->master->set_cs) {
707 spi->master->set_cs(spi, !enable);
708 }
709}
710
711#ifdef CONFIG_HAS_DMA
712static int spi_map_buf(struct spi_master *master, struct device *dev,
713 struct sg_table *sgt, void *buf, size_t len,
714 enum dma_data_direction dir)
715{
716 const bool vmalloced_buf = is_vmalloc_addr(buf);
717 unsigned int max_seg_size = dma_get_max_seg_size(dev);
718#ifdef CONFIG_HIGHMEM
719 const bool kmap_buf = ((unsigned long)buf >= PKMAP_BASE &&
720 (unsigned long)buf < (PKMAP_BASE +
721 (LAST_PKMAP * PAGE_SIZE)));
722#else
723 const bool kmap_buf = false;
724#endif
725 int desc_len;
726 int sgs;
727 struct page *vm_page;
728 struct scatterlist *sg;
729 void *sg_buf;
730 size_t min;
731 int i, ret;
732
733 if (vmalloced_buf || kmap_buf) {
734 desc_len = min_t(int, max_seg_size, PAGE_SIZE);
735 sgs = DIV_ROUND_UP(len + offset_in_page(buf), desc_len);
736 } else if (virt_addr_valid(buf)) {
737 desc_len = min_t(int, max_seg_size, master->max_dma_len);
738 sgs = DIV_ROUND_UP(len, desc_len);
739 } else {
740 return -EINVAL;
741 }
742
743 ret = sg_alloc_table(sgt, sgs, GFP_KERNEL);
744 if (ret != 0)
745 return ret;
746
747 sg = &sgt->sgl[0];
748 for (i = 0; i < sgs; i++) {
749
750 if (vmalloced_buf || kmap_buf) {
751 min = min_t(size_t,
752 len, desc_len - offset_in_page(buf));
753 if (vmalloced_buf)
754 vm_page = vmalloc_to_page(buf);
755 else
756 vm_page = kmap_to_page(buf);
757 if (!vm_page) {
758 sg_free_table(sgt);
759 return -ENOMEM;
760 }
761 sg_set_page(sg, vm_page,
762 min, offset_in_page(buf));
763 } else {
764 min = min_t(size_t, len, desc_len);
765 sg_buf = buf;
766 sg_set_buf(sg, sg_buf, min);
767 }
768
769 buf += min;
770 len -= min;
771 sg = sg_next(sg);
772 }
773
774 ret = dma_map_sg(dev, sgt->sgl, sgt->nents, dir);
775 if (!ret)
776 ret = -ENOMEM;
777 if (ret < 0) {
778 sg_free_table(sgt);
779 return ret;
780 }
781
782 sgt->nents = ret;
783
784 return 0;
785}
786
787static void spi_unmap_buf(struct spi_master *master, struct device *dev,
788 struct sg_table *sgt, enum dma_data_direction dir)
789{
790 if (sgt->orig_nents) {
791 dma_unmap_sg(dev, sgt->sgl, sgt->orig_nents, dir);
792 sg_free_table(sgt);
793 }
794}
795
796static int __spi_map_msg(struct spi_master *master, struct spi_message *msg)
797{
798 struct device *tx_dev, *rx_dev;
799 struct spi_transfer *xfer;
800 int ret;
801
802 if (!master->can_dma)
803 return 0;
804
805 if (master->dma_tx)
806 tx_dev = master->dma_tx->device->dev;
807 else
808 tx_dev = &master->dev;
809
810 if (master->dma_rx)
811 rx_dev = master->dma_rx->device->dev;
812 else
813 rx_dev = &master->dev;
814
815 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
816 if (!master->can_dma(master, msg->spi, xfer))
817 continue;
818
819 if (xfer->tx_buf != NULL) {
820 ret = spi_map_buf(master, tx_dev, &xfer->tx_sg,
821 (void *)xfer->tx_buf, xfer->len,
822 DMA_TO_DEVICE);
823 if (ret != 0)
824 return ret;
825 }
826
827 if (xfer->rx_buf != NULL) {
828 ret = spi_map_buf(master, rx_dev, &xfer->rx_sg,
829 xfer->rx_buf, xfer->len,
830 DMA_FROM_DEVICE);
831 if (ret != 0) {
832 spi_unmap_buf(master, tx_dev, &xfer->tx_sg,
833 DMA_TO_DEVICE);
834 return ret;
835 }
836 }
837 }
838
839 master->cur_msg_mapped = true;
840
841 return 0;
842}
843
844static int __spi_unmap_msg(struct spi_master *master, struct spi_message *msg)
845{
846 struct spi_transfer *xfer;
847 struct device *tx_dev, *rx_dev;
848
849 if (!master->cur_msg_mapped || !master->can_dma)
850 return 0;
851
852 if (master->dma_tx)
853 tx_dev = master->dma_tx->device->dev;
854 else
855 tx_dev = &master->dev;
856
857 if (master->dma_rx)
858 rx_dev = master->dma_rx->device->dev;
859 else
860 rx_dev = &master->dev;
861
862 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
863 if (!master->can_dma(master, msg->spi, xfer))
864 continue;
865
866 spi_unmap_buf(master, rx_dev, &xfer->rx_sg, DMA_FROM_DEVICE);
867 spi_unmap_buf(master, tx_dev, &xfer->tx_sg, DMA_TO_DEVICE);
868 }
869
870 return 0;
871}
872#else /* !CONFIG_HAS_DMA */
873static inline int spi_map_buf(struct spi_master *master,
874 struct device *dev, struct sg_table *sgt,
875 void *buf, size_t len,
876 enum dma_data_direction dir)
877{
878 return -EINVAL;
879}
880
881static inline void spi_unmap_buf(struct spi_master *master,
882 struct device *dev, struct sg_table *sgt,
883 enum dma_data_direction dir)
884{
885}
886
887static inline int __spi_map_msg(struct spi_master *master,
888 struct spi_message *msg)
889{
890 return 0;
891}
892
893static inline int __spi_unmap_msg(struct spi_master *master,
894 struct spi_message *msg)
895{
896 return 0;
897}
898#endif /* !CONFIG_HAS_DMA */
899
900static inline int spi_unmap_msg(struct spi_master *master,
901 struct spi_message *msg)
902{
903 struct spi_transfer *xfer;
904
905 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
906 /*
907 * Restore the original value of tx_buf or rx_buf if they are
908 * NULL.
909 */
910 if (xfer->tx_buf == master->dummy_tx)
911 xfer->tx_buf = NULL;
912 if (xfer->rx_buf == master->dummy_rx)
913 xfer->rx_buf = NULL;
914 }
915
916 return __spi_unmap_msg(master, msg);
917}
918
919static int spi_map_msg(struct spi_master *master, struct spi_message *msg)
920{
921 struct spi_transfer *xfer;
922 void *tmp;
923 unsigned int max_tx, max_rx;
924
925 if (master->flags & (SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX)) {
926 max_tx = 0;
927 max_rx = 0;
928
929 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
930 if ((master->flags & SPI_MASTER_MUST_TX) &&
931 !xfer->tx_buf)
932 max_tx = max(xfer->len, max_tx);
933 if ((master->flags & SPI_MASTER_MUST_RX) &&
934 !xfer->rx_buf)
935 max_rx = max(xfer->len, max_rx);
936 }
937
938 if (max_tx) {
939 tmp = krealloc(master->dummy_tx, max_tx,
940 GFP_KERNEL | GFP_DMA);
941 if (!tmp)
942 return -ENOMEM;
943 master->dummy_tx = tmp;
944 memset(tmp, 0, max_tx);
945 }
946
947 if (max_rx) {
948 tmp = krealloc(master->dummy_rx, max_rx,
949 GFP_KERNEL | GFP_DMA);
950 if (!tmp)
951 return -ENOMEM;
952 master->dummy_rx = tmp;
953 }
954
955 if (max_tx || max_rx) {
956 list_for_each_entry(xfer, &msg->transfers,
957 transfer_list) {
958 if (!xfer->tx_buf)
959 xfer->tx_buf = master->dummy_tx;
960 if (!xfer->rx_buf)
961 xfer->rx_buf = master->dummy_rx;
962 }
963 }
964 }
965
966 return __spi_map_msg(master, msg);
967}
968
969/*
970 * spi_transfer_one_message - Default implementation of transfer_one_message()
971 *
972 * This is a standard implementation of transfer_one_message() for
973 * drivers which implement a transfer_one() operation. It provides
974 * standard handling of delays and chip select management.
975 */
976static int spi_transfer_one_message(struct spi_master *master,
977 struct spi_message *msg)
978{
979 struct spi_transfer *xfer;
980 bool keep_cs = false;
981 int ret = 0;
982 unsigned long long ms = 1;
983 struct spi_statistics *statm = &master->statistics;
984 struct spi_statistics *stats = &msg->spi->statistics;
985
986 spi_set_cs(msg->spi, true);
987
988 SPI_STATISTICS_INCREMENT_FIELD(statm, messages);
989 SPI_STATISTICS_INCREMENT_FIELD(stats, messages);
990
991 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
992 trace_spi_transfer_start(msg, xfer);
993
994 spi_statistics_add_transfer_stats(statm, xfer, master);
995 spi_statistics_add_transfer_stats(stats, xfer, master);
996
997 if (xfer->tx_buf || xfer->rx_buf) {
998 reinit_completion(&master->xfer_completion);
999
1000 ret = master->transfer_one(master, msg->spi, xfer);
1001 if (ret < 0) {
1002 SPI_STATISTICS_INCREMENT_FIELD(statm,
1003 errors);
1004 SPI_STATISTICS_INCREMENT_FIELD(stats,
1005 errors);
1006 dev_err(&msg->spi->dev,
1007 "SPI transfer failed: %d\n", ret);
1008 goto out;
1009 }
1010
1011 if (ret > 0) {
1012 ret = 0;
1013 ms = 8LL * 1000LL * xfer->len;
1014 do_div(ms, xfer->speed_hz);
1015 ms += ms + 100; /* some tolerance */
1016
1017 if (ms > UINT_MAX)
1018 ms = UINT_MAX;
1019
1020 ms = wait_for_completion_timeout(&master->xfer_completion,
1021 msecs_to_jiffies(ms));
1022 }
1023
1024 if (ms == 0) {
1025 SPI_STATISTICS_INCREMENT_FIELD(statm,
1026 timedout);
1027 SPI_STATISTICS_INCREMENT_FIELD(stats,
1028 timedout);
1029 dev_err(&msg->spi->dev,
1030 "SPI transfer timed out\n");
1031 msg->status = -ETIMEDOUT;
1032 }
1033 } else {
1034 if (xfer->len)
1035 dev_err(&msg->spi->dev,
1036 "Bufferless transfer has length %u\n",
1037 xfer->len);
1038 }
1039
1040 trace_spi_transfer_stop(msg, xfer);
1041
1042 if (msg->status != -EINPROGRESS)
1043 goto out;
1044
1045 if (xfer->delay_usecs) {
1046 u16 us = xfer->delay_usecs;
1047
1048 if (us <= 10)
1049 udelay(us);
1050 else
1051 usleep_range(us, us + DIV_ROUND_UP(us, 10));
1052 }
1053
1054 if (xfer->cs_change) {
1055 if (list_is_last(&xfer->transfer_list,
1056 &msg->transfers)) {
1057 keep_cs = true;
1058 } else {
1059 spi_set_cs(msg->spi, false);
1060 udelay(10);
1061 spi_set_cs(msg->spi, true);
1062 }
1063 }
1064
1065 msg->actual_length += xfer->len;
1066 }
1067
1068out:
1069 if (ret != 0 || !keep_cs)
1070 spi_set_cs(msg->spi, false);
1071
1072 if (msg->status == -EINPROGRESS)
1073 msg->status = ret;
1074
1075 if (msg->status && master->handle_err)
1076 master->handle_err(master, msg);
1077
1078 spi_res_release(master, msg);
1079
1080 spi_finalize_current_message(master);
1081
1082 return ret;
1083}
1084
1085/**
1086 * spi_finalize_current_transfer - report completion of a transfer
1087 * @master: the master reporting completion
1088 *
1089 * Called by SPI drivers using the core transfer_one_message()
1090 * implementation to notify it that the current interrupt driven
1091 * transfer has finished and the next one may be scheduled.
1092 */
1093void spi_finalize_current_transfer(struct spi_master *master)
1094{
1095 complete(&master->xfer_completion);
1096}
1097EXPORT_SYMBOL_GPL(spi_finalize_current_transfer);
1098
1099/**
1100 * __spi_pump_messages - function which processes spi message queue
1101 * @master: master to process queue for
1102 * @in_kthread: true if we are in the context of the message pump thread
1103 *
1104 * This function checks if there is any spi message in the queue that
1105 * needs processing and if so call out to the driver to initialize hardware
1106 * and transfer each message.
1107 *
1108 * Note that it is called both from the kthread itself and also from
1109 * inside spi_sync(); the queue extraction handling at the top of the
1110 * function should deal with this safely.
1111 */
1112static void __spi_pump_messages(struct spi_master *master, bool in_kthread)
1113{
1114 unsigned long flags;
1115 bool was_busy = false;
1116 int ret;
1117
1118 /* Lock queue */
1119 spin_lock_irqsave(&master->queue_lock, flags);
1120
1121 /* Make sure we are not already running a message */
1122 if (master->cur_msg) {
1123 spin_unlock_irqrestore(&master->queue_lock, flags);
1124 return;
1125 }
1126
1127 /* If another context is idling the device then defer */
1128 if (master->idling) {
1129 kthread_queue_work(&master->kworker, &master->pump_messages);
1130 spin_unlock_irqrestore(&master->queue_lock, flags);
1131 return;
1132 }
1133
1134 /* Check if the queue is idle */
1135 if (list_empty(&master->queue) || !master->running) {
1136 if (!master->busy) {
1137 spin_unlock_irqrestore(&master->queue_lock, flags);
1138 return;
1139 }
1140
1141 /* Only do teardown in the thread */
1142 if (!in_kthread) {
1143 kthread_queue_work(&master->kworker,
1144 &master->pump_messages);
1145 spin_unlock_irqrestore(&master->queue_lock, flags);
1146 return;
1147 }
1148
1149 master->busy = false;
1150 master->idling = true;
1151 spin_unlock_irqrestore(&master->queue_lock, flags);
1152
1153 kfree(master->dummy_rx);
1154 master->dummy_rx = NULL;
1155 kfree(master->dummy_tx);
1156 master->dummy_tx = NULL;
1157 if (master->unprepare_transfer_hardware &&
1158 master->unprepare_transfer_hardware(master))
1159 dev_err(&master->dev,
1160 "failed to unprepare transfer hardware\n");
1161 if (master->auto_runtime_pm) {
1162 pm_runtime_mark_last_busy(master->dev.parent);
1163 pm_runtime_put_autosuspend(master->dev.parent);
1164 }
1165 trace_spi_master_idle(master);
1166
1167 spin_lock_irqsave(&master->queue_lock, flags);
1168 master->idling = false;
1169 spin_unlock_irqrestore(&master->queue_lock, flags);
1170 return;
1171 }
1172
1173 /* Extract head of queue */
1174 master->cur_msg =
1175 list_first_entry(&master->queue, struct spi_message, queue);
1176
1177 list_del_init(&master->cur_msg->queue);
1178 if (master->busy)
1179 was_busy = true;
1180 else
1181 master->busy = true;
1182 spin_unlock_irqrestore(&master->queue_lock, flags);
1183
1184 mutex_lock(&master->io_mutex);
1185
1186 if (!was_busy && master->auto_runtime_pm) {
1187 ret = pm_runtime_get_sync(master->dev.parent);
1188 if (ret < 0) {
1189 dev_err(&master->dev, "Failed to power device: %d\n",
1190 ret);
1191 mutex_unlock(&master->io_mutex);
1192 return;
1193 }
1194 }
1195
1196 if (!was_busy)
1197 trace_spi_master_busy(master);
1198
1199 if (!was_busy && master->prepare_transfer_hardware) {
1200 ret = master->prepare_transfer_hardware(master);
1201 if (ret) {
1202 dev_err(&master->dev,
1203 "failed to prepare transfer hardware\n");
1204
1205 if (master->auto_runtime_pm)
1206 pm_runtime_put(master->dev.parent);
1207 mutex_unlock(&master->io_mutex);
1208 return;
1209 }
1210 }
1211
1212 trace_spi_message_start(master->cur_msg);
1213
1214 if (master->prepare_message) {
1215 ret = master->prepare_message(master, master->cur_msg);
1216 if (ret) {
1217 dev_err(&master->dev,
1218 "failed to prepare message: %d\n", ret);
1219 master->cur_msg->status = ret;
1220 spi_finalize_current_message(master);
1221 goto out;
1222 }
1223 master->cur_msg_prepared = true;
1224 }
1225
1226 ret = spi_map_msg(master, master->cur_msg);
1227 if (ret) {
1228 master->cur_msg->status = ret;
1229 spi_finalize_current_message(master);
1230 goto out;
1231 }
1232
1233 ret = master->transfer_one_message(master, master->cur_msg);
1234 if (ret) {
1235 dev_err(&master->dev,
1236 "failed to transfer one message from queue\n");
1237 goto out;
1238 }
1239
1240out:
1241 mutex_unlock(&master->io_mutex);
1242
1243 /* Prod the scheduler in case transfer_one() was busy waiting */
1244 if (!ret)
1245 cond_resched();
1246}
1247
1248/**
1249 * spi_pump_messages - kthread work function which processes spi message queue
1250 * @work: pointer to kthread work struct contained in the master struct
1251 */
1252static void spi_pump_messages(struct kthread_work *work)
1253{
1254 struct spi_master *master =
1255 container_of(work, struct spi_master, pump_messages);
1256
1257 __spi_pump_messages(master, true);
1258}
1259
1260static int spi_init_queue(struct spi_master *master)
1261{
1262 struct sched_param param = { .sched_priority = MAX_RT_PRIO - 1 };
1263
1264 master->running = false;
1265 master->busy = false;
1266
1267 kthread_init_worker(&master->kworker);
1268 master->kworker_task = kthread_run(kthread_worker_fn,
1269 &master->kworker, "%s",
1270 dev_name(&master->dev));
1271 if (IS_ERR(master->kworker_task)) {
1272 dev_err(&master->dev, "failed to create message pump task\n");
1273 return PTR_ERR(master->kworker_task);
1274 }
1275 kthread_init_work(&master->pump_messages, spi_pump_messages);
1276
1277 /*
1278 * Master config will indicate if this controller should run the
1279 * message pump with high (realtime) priority to reduce the transfer
1280 * latency on the bus by minimising the delay between a transfer
1281 * request and the scheduling of the message pump thread. Without this
1282 * setting the message pump thread will remain at default priority.
1283 */
1284 if (master->rt) {
1285 dev_info(&master->dev,
1286 "will run message pump with realtime priority\n");
1287 sched_setscheduler(master->kworker_task, SCHED_FIFO, ¶m);
1288 }
1289
1290 return 0;
1291}
1292
1293/**
1294 * spi_get_next_queued_message() - called by driver to check for queued
1295 * messages
1296 * @master: the master to check for queued messages
1297 *
1298 * If there are more messages in the queue, the next message is returned from
1299 * this call.
1300 *
1301 * Return: the next message in the queue, else NULL if the queue is empty.
1302 */
1303struct spi_message *spi_get_next_queued_message(struct spi_master *master)
1304{
1305 struct spi_message *next;
1306 unsigned long flags;
1307
1308 /* get a pointer to the next message, if any */
1309 spin_lock_irqsave(&master->queue_lock, flags);
1310 next = list_first_entry_or_null(&master->queue, struct spi_message,
1311 queue);
1312 spin_unlock_irqrestore(&master->queue_lock, flags);
1313
1314 return next;
1315}
1316EXPORT_SYMBOL_GPL(spi_get_next_queued_message);
1317
1318/**
1319 * spi_finalize_current_message() - the current message is complete
1320 * @master: the master to return the message to
1321 *
1322 * Called by the driver to notify the core that the message in the front of the
1323 * queue is complete and can be removed from the queue.
1324 */
1325void spi_finalize_current_message(struct spi_master *master)
1326{
1327 struct spi_message *mesg;
1328 unsigned long flags;
1329 int ret;
1330
1331 spin_lock_irqsave(&master->queue_lock, flags);
1332 mesg = master->cur_msg;
1333 spin_unlock_irqrestore(&master->queue_lock, flags);
1334
1335 spi_unmap_msg(master, mesg);
1336
1337 if (master->cur_msg_prepared && master->unprepare_message) {
1338 ret = master->unprepare_message(master, mesg);
1339 if (ret) {
1340 dev_err(&master->dev,
1341 "failed to unprepare message: %d\n", ret);
1342 }
1343 }
1344
1345 spin_lock_irqsave(&master->queue_lock, flags);
1346 master->cur_msg = NULL;
1347 master->cur_msg_prepared = false;
1348 kthread_queue_work(&master->kworker, &master->pump_messages);
1349 spin_unlock_irqrestore(&master->queue_lock, flags);
1350
1351 trace_spi_message_done(mesg);
1352
1353 mesg->state = NULL;
1354 if (mesg->complete)
1355 mesg->complete(mesg->context);
1356}
1357EXPORT_SYMBOL_GPL(spi_finalize_current_message);
1358
1359static int spi_start_queue(struct spi_master *master)
1360{
1361 unsigned long flags;
1362
1363 spin_lock_irqsave(&master->queue_lock, flags);
1364
1365 if (master->running || master->busy) {
1366 spin_unlock_irqrestore(&master->queue_lock, flags);
1367 return -EBUSY;
1368 }
1369
1370 master->running = true;
1371 master->cur_msg = NULL;
1372 spin_unlock_irqrestore(&master->queue_lock, flags);
1373
1374 kthread_queue_work(&master->kworker, &master->pump_messages);
1375
1376 return 0;
1377}
1378
1379static int spi_stop_queue(struct spi_master *master)
1380{
1381 unsigned long flags;
1382 unsigned limit = 500;
1383 int ret = 0;
1384
1385 spin_lock_irqsave(&master->queue_lock, flags);
1386
1387 /*
1388 * This is a bit lame, but is optimized for the common execution path.
1389 * A wait_queue on the master->busy could be used, but then the common
1390 * execution path (pump_messages) would be required to call wake_up or
1391 * friends on every SPI message. Do this instead.
1392 */
1393 while ((!list_empty(&master->queue) || master->busy) && limit--) {
1394 spin_unlock_irqrestore(&master->queue_lock, flags);
1395 usleep_range(10000, 11000);
1396 spin_lock_irqsave(&master->queue_lock, flags);
1397 }
1398
1399 if (!list_empty(&master->queue) || master->busy)
1400 ret = -EBUSY;
1401 else
1402 master->running = false;
1403
1404 spin_unlock_irqrestore(&master->queue_lock, flags);
1405
1406 if (ret) {
1407 dev_warn(&master->dev,
1408 "could not stop message queue\n");
1409 return ret;
1410 }
1411 return ret;
1412}
1413
1414static int spi_destroy_queue(struct spi_master *master)
1415{
1416 int ret;
1417
1418 ret = spi_stop_queue(master);
1419
1420 /*
1421 * kthread_flush_worker will block until all work is done.
1422 * If the reason that stop_queue timed out is that the work will never
1423 * finish, then it does no good to call flush/stop thread, so
1424 * return anyway.
1425 */
1426 if (ret) {
1427 dev_err(&master->dev, "problem destroying queue\n");
1428 return ret;
1429 }
1430
1431 kthread_flush_worker(&master->kworker);
1432 kthread_stop(master->kworker_task);
1433
1434 return 0;
1435}
1436
1437static int __spi_queued_transfer(struct spi_device *spi,
1438 struct spi_message *msg,
1439 bool need_pump)
1440{
1441 struct spi_master *master = spi->master;
1442 unsigned long flags;
1443
1444 spin_lock_irqsave(&master->queue_lock, flags);
1445
1446 if (!master->running) {
1447 spin_unlock_irqrestore(&master->queue_lock, flags);
1448 return -ESHUTDOWN;
1449 }
1450 msg->actual_length = 0;
1451 msg->status = -EINPROGRESS;
1452
1453 list_add_tail(&msg->queue, &master->queue);
1454 if (!master->busy && need_pump)
1455 kthread_queue_work(&master->kworker, &master->pump_messages);
1456
1457 spin_unlock_irqrestore(&master->queue_lock, flags);
1458 return 0;
1459}
1460
1461/**
1462 * spi_queued_transfer - transfer function for queued transfers
1463 * @spi: spi device which is requesting transfer
1464 * @msg: spi message which is to handled is queued to driver queue
1465 *
1466 * Return: zero on success, else a negative error code.
1467 */
1468static int spi_queued_transfer(struct spi_device *spi, struct spi_message *msg)
1469{
1470 return __spi_queued_transfer(spi, msg, true);
1471}
1472
1473static int spi_master_initialize_queue(struct spi_master *master)
1474{
1475 int ret;
1476
1477 master->transfer = spi_queued_transfer;
1478 if (!master->transfer_one_message)
1479 master->transfer_one_message = spi_transfer_one_message;
1480
1481 /* Initialize and start queue */
1482 ret = spi_init_queue(master);
1483 if (ret) {
1484 dev_err(&master->dev, "problem initializing queue\n");
1485 goto err_init_queue;
1486 }
1487 master->queued = true;
1488 ret = spi_start_queue(master);
1489 if (ret) {
1490 dev_err(&master->dev, "problem starting queue\n");
1491 goto err_start_queue;
1492 }
1493
1494 return 0;
1495
1496err_start_queue:
1497 spi_destroy_queue(master);
1498err_init_queue:
1499 return ret;
1500}
1501
1502/*-------------------------------------------------------------------------*/
1503
1504#if defined(CONFIG_OF)
1505static struct spi_device *
1506of_register_spi_device(struct spi_master *master, struct device_node *nc)
1507{
1508 struct spi_device *spi;
1509 int rc;
1510 u32 value;
1511
1512 /* Alloc an spi_device */
1513 spi = spi_alloc_device(master);
1514 if (!spi) {
1515 dev_err(&master->dev, "spi_device alloc error for %s\n",
1516 nc->full_name);
1517 rc = -ENOMEM;
1518 goto err_out;
1519 }
1520
1521 /* Select device driver */
1522 rc = of_modalias_node(nc, spi->modalias,
1523 sizeof(spi->modalias));
1524 if (rc < 0) {
1525 dev_err(&master->dev, "cannot find modalias for %s\n",
1526 nc->full_name);
1527 goto err_out;
1528 }
1529
1530 /* Device address */
1531 rc = of_property_read_u32(nc, "reg", &value);
1532 if (rc) {
1533 dev_err(&master->dev, "%s has no valid 'reg' property (%d)\n",
1534 nc->full_name, rc);
1535 goto err_out;
1536 }
1537 spi->chip_select = value;
1538
1539 /* Mode (clock phase/polarity/etc.) */
1540 if (of_find_property(nc, "spi-cpha", NULL))
1541 spi->mode |= SPI_CPHA;
1542 if (of_find_property(nc, "spi-cpol", NULL))
1543 spi->mode |= SPI_CPOL;
1544 if (of_find_property(nc, "spi-cs-high", NULL))
1545 spi->mode |= SPI_CS_HIGH;
1546 if (of_find_property(nc, "spi-3wire", NULL))
1547 spi->mode |= SPI_3WIRE;
1548 if (of_find_property(nc, "spi-lsb-first", NULL))
1549 spi->mode |= SPI_LSB_FIRST;
1550
1551 /* Device DUAL/QUAD mode */
1552 if (!of_property_read_u32(nc, "spi-tx-bus-width", &value)) {
1553 switch (value) {
1554 case 1:
1555 break;
1556 case 2:
1557 spi->mode |= SPI_TX_DUAL;
1558 break;
1559 case 4:
1560 spi->mode |= SPI_TX_QUAD;
1561 break;
1562 default:
1563 dev_warn(&master->dev,
1564 "spi-tx-bus-width %d not supported\n",
1565 value);
1566 break;
1567 }
1568 }
1569
1570 if (!of_property_read_u32(nc, "spi-rx-bus-width", &value)) {
1571 switch (value) {
1572 case 1:
1573 break;
1574 case 2:
1575 spi->mode |= SPI_RX_DUAL;
1576 break;
1577 case 4:
1578 spi->mode |= SPI_RX_QUAD;
1579 break;
1580 default:
1581 dev_warn(&master->dev,
1582 "spi-rx-bus-width %d not supported\n",
1583 value);
1584 break;
1585 }
1586 }
1587
1588 /* Device speed */
1589 rc = of_property_read_u32(nc, "spi-max-frequency", &value);
1590 if (rc) {
1591 dev_err(&master->dev, "%s has no valid 'spi-max-frequency' property (%d)\n",
1592 nc->full_name, rc);
1593 goto err_out;
1594 }
1595 spi->max_speed_hz = value;
1596
1597 /* Store a pointer to the node in the device structure */
1598 of_node_get(nc);
1599 spi->dev.of_node = nc;
1600
1601 /* Register the new device */
1602 rc = spi_add_device(spi);
1603 if (rc) {
1604 dev_err(&master->dev, "spi_device register error %s\n",
1605 nc->full_name);
1606 goto err_out;
1607 }
1608
1609 return spi;
1610
1611err_out:
1612 spi_dev_put(spi);
1613 return ERR_PTR(rc);
1614}
1615
1616/**
1617 * of_register_spi_devices() - Register child devices onto the SPI bus
1618 * @master: Pointer to spi_master device
1619 *
1620 * Registers an spi_device for each child node of master node which has a 'reg'
1621 * property.
1622 */
1623static void of_register_spi_devices(struct spi_master *master)
1624{
1625 struct spi_device *spi;
1626 struct device_node *nc;
1627
1628 if (!master->dev.of_node)
1629 return;
1630
1631 for_each_available_child_of_node(master->dev.of_node, nc) {
1632 if (of_node_test_and_set_flag(nc, OF_POPULATED))
1633 continue;
1634 spi = of_register_spi_device(master, nc);
1635 if (IS_ERR(spi)) {
1636 dev_warn(&master->dev, "Failed to create SPI device for %s\n",
1637 nc->full_name);
1638 of_node_clear_flag(nc, OF_POPULATED);
1639 }
1640 }
1641}
1642#else
1643static void of_register_spi_devices(struct spi_master *master) { }
1644#endif
1645
1646#ifdef CONFIG_ACPI
1647static int acpi_spi_add_resource(struct acpi_resource *ares, void *data)
1648{
1649 struct spi_device *spi = data;
1650 struct spi_master *master = spi->master;
1651
1652 if (ares->type == ACPI_RESOURCE_TYPE_SERIAL_BUS) {
1653 struct acpi_resource_spi_serialbus *sb;
1654
1655 sb = &ares->data.spi_serial_bus;
1656 if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_SPI) {
1657 /*
1658 * ACPI DeviceSelection numbering is handled by the
1659 * host controller driver in Windows and can vary
1660 * from driver to driver. In Linux we always expect
1661 * 0 .. max - 1 so we need to ask the driver to
1662 * translate between the two schemes.
1663 */
1664 if (master->fw_translate_cs) {
1665 int cs = master->fw_translate_cs(master,
1666 sb->device_selection);
1667 if (cs < 0)
1668 return cs;
1669 spi->chip_select = cs;
1670 } else {
1671 spi->chip_select = sb->device_selection;
1672 }
1673
1674 spi->max_speed_hz = sb->connection_speed;
1675
1676 if (sb->clock_phase == ACPI_SPI_SECOND_PHASE)
1677 spi->mode |= SPI_CPHA;
1678 if (sb->clock_polarity == ACPI_SPI_START_HIGH)
1679 spi->mode |= SPI_CPOL;
1680 if (sb->device_polarity == ACPI_SPI_ACTIVE_HIGH)
1681 spi->mode |= SPI_CS_HIGH;
1682 }
1683 } else if (spi->irq < 0) {
1684 struct resource r;
1685
1686 if (acpi_dev_resource_interrupt(ares, 0, &r))
1687 spi->irq = r.start;
1688 }
1689
1690 /* Always tell the ACPI core to skip this resource */
1691 return 1;
1692}
1693
1694static acpi_status acpi_register_spi_device(struct spi_master *master,
1695 struct acpi_device *adev)
1696{
1697 struct list_head resource_list;
1698 struct spi_device *spi;
1699 int ret;
1700
1701 if (acpi_bus_get_status(adev) || !adev->status.present ||
1702 acpi_device_enumerated(adev))
1703 return AE_OK;
1704
1705 spi = spi_alloc_device(master);
1706 if (!spi) {
1707 dev_err(&master->dev, "failed to allocate SPI device for %s\n",
1708 dev_name(&adev->dev));
1709 return AE_NO_MEMORY;
1710 }
1711
1712 ACPI_COMPANION_SET(&spi->dev, adev);
1713 spi->irq = -1;
1714
1715 INIT_LIST_HEAD(&resource_list);
1716 ret = acpi_dev_get_resources(adev, &resource_list,
1717 acpi_spi_add_resource, spi);
1718 acpi_dev_free_resource_list(&resource_list);
1719
1720 if (ret < 0 || !spi->max_speed_hz) {
1721 spi_dev_put(spi);
1722 return AE_OK;
1723 }
1724
1725 if (spi->irq < 0)
1726 spi->irq = acpi_dev_gpio_irq_get(adev, 0);
1727
1728 acpi_device_set_enumerated(adev);
1729
1730 adev->power.flags.ignore_parent = true;
1731 strlcpy(spi->modalias, acpi_device_hid(adev), sizeof(spi->modalias));
1732 if (spi_add_device(spi)) {
1733 adev->power.flags.ignore_parent = false;
1734 dev_err(&master->dev, "failed to add SPI device %s from ACPI\n",
1735 dev_name(&adev->dev));
1736 spi_dev_put(spi);
1737 }
1738
1739 return AE_OK;
1740}
1741
1742static acpi_status acpi_spi_add_device(acpi_handle handle, u32 level,
1743 void *data, void **return_value)
1744{
1745 struct spi_master *master = data;
1746 struct acpi_device *adev;
1747
1748 if (acpi_bus_get_device(handle, &adev))
1749 return AE_OK;
1750
1751 return acpi_register_spi_device(master, adev);
1752}
1753
1754static void acpi_register_spi_devices(struct spi_master *master)
1755{
1756 acpi_status status;
1757 acpi_handle handle;
1758
1759 handle = ACPI_HANDLE(master->dev.parent);
1760 if (!handle)
1761 return;
1762
1763 status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1,
1764 acpi_spi_add_device, NULL,
1765 master, NULL);
1766 if (ACPI_FAILURE(status))
1767 dev_warn(&master->dev, "failed to enumerate SPI slaves\n");
1768}
1769#else
1770static inline void acpi_register_spi_devices(struct spi_master *master) {}
1771#endif /* CONFIG_ACPI */
1772
1773static void spi_master_release(struct device *dev)
1774{
1775 struct spi_master *master;
1776
1777 master = container_of(dev, struct spi_master, dev);
1778 kfree(master);
1779}
1780
1781static struct class spi_master_class = {
1782 .name = "spi_master",
1783 .owner = THIS_MODULE,
1784 .dev_release = spi_master_release,
1785 .dev_groups = spi_master_groups,
1786};
1787
1788
1789/**
1790 * spi_alloc_master - allocate SPI master controller
1791 * @dev: the controller, possibly using the platform_bus
1792 * @size: how much zeroed driver-private data to allocate; the pointer to this
1793 * memory is in the driver_data field of the returned device,
1794 * accessible with spi_master_get_devdata().
1795 * Context: can sleep
1796 *
1797 * This call is used only by SPI master controller drivers, which are the
1798 * only ones directly touching chip registers. It's how they allocate
1799 * an spi_master structure, prior to calling spi_register_master().
1800 *
1801 * This must be called from context that can sleep.
1802 *
1803 * The caller is responsible for assigning the bus number and initializing
1804 * the master's methods before calling spi_register_master(); and (after errors
1805 * adding the device) calling spi_master_put() to prevent a memory leak.
1806 *
1807 * Return: the SPI master structure on success, else NULL.
1808 */
1809struct spi_master *spi_alloc_master(struct device *dev, unsigned size)
1810{
1811 struct spi_master *master;
1812
1813 if (!dev)
1814 return NULL;
1815
1816 master = kzalloc(size + sizeof(*master), GFP_KERNEL);
1817 if (!master)
1818 return NULL;
1819
1820 device_initialize(&master->dev);
1821 master->bus_num = -1;
1822 master->num_chipselect = 1;
1823 master->dev.class = &spi_master_class;
1824 master->dev.parent = dev;
1825 pm_suspend_ignore_children(&master->dev, true);
1826 spi_master_set_devdata(master, &master[1]);
1827
1828 return master;
1829}
1830EXPORT_SYMBOL_GPL(spi_alloc_master);
1831
1832#ifdef CONFIG_OF
1833static int of_spi_register_master(struct spi_master *master)
1834{
1835 int nb, i, *cs;
1836 struct device_node *np = master->dev.of_node;
1837
1838 if (!np)
1839 return 0;
1840
1841 nb = of_gpio_named_count(np, "cs-gpios");
1842 master->num_chipselect = max_t(int, nb, master->num_chipselect);
1843
1844 /* Return error only for an incorrectly formed cs-gpios property */
1845 if (nb == 0 || nb == -ENOENT)
1846 return 0;
1847 else if (nb < 0)
1848 return nb;
1849
1850 cs = devm_kzalloc(&master->dev,
1851 sizeof(int) * master->num_chipselect,
1852 GFP_KERNEL);
1853 master->cs_gpios = cs;
1854
1855 if (!master->cs_gpios)
1856 return -ENOMEM;
1857
1858 for (i = 0; i < master->num_chipselect; i++)
1859 cs[i] = -ENOENT;
1860
1861 for (i = 0; i < nb; i++)
1862 cs[i] = of_get_named_gpio(np, "cs-gpios", i);
1863
1864 return 0;
1865}
1866#else
1867static int of_spi_register_master(struct spi_master *master)
1868{
1869 return 0;
1870}
1871#endif
1872
1873/**
1874 * spi_register_master - register SPI master controller
1875 * @master: initialized master, originally from spi_alloc_master()
1876 * Context: can sleep
1877 *
1878 * SPI master controllers connect to their drivers using some non-SPI bus,
1879 * such as the platform bus. The final stage of probe() in that code
1880 * includes calling spi_register_master() to hook up to this SPI bus glue.
1881 *
1882 * SPI controllers use board specific (often SOC specific) bus numbers,
1883 * and board-specific addressing for SPI devices combines those numbers
1884 * with chip select numbers. Since SPI does not directly support dynamic
1885 * device identification, boards need configuration tables telling which
1886 * chip is at which address.
1887 *
1888 * This must be called from context that can sleep. It returns zero on
1889 * success, else a negative error code (dropping the master's refcount).
1890 * After a successful return, the caller is responsible for calling
1891 * spi_unregister_master().
1892 *
1893 * Return: zero on success, else a negative error code.
1894 */
1895int spi_register_master(struct spi_master *master)
1896{
1897 static atomic_t dyn_bus_id = ATOMIC_INIT((1<<15) - 1);
1898 struct device *dev = master->dev.parent;
1899 struct boardinfo *bi;
1900 int status = -ENODEV;
1901 int dynamic = 0;
1902
1903 if (!dev)
1904 return -ENODEV;
1905
1906 status = of_spi_register_master(master);
1907 if (status)
1908 return status;
1909
1910 /* even if it's just one always-selected device, there must
1911 * be at least one chipselect
1912 */
1913 if (master->num_chipselect == 0)
1914 return -EINVAL;
1915
1916 if ((master->bus_num < 0) && master->dev.of_node)
1917 master->bus_num = of_alias_get_id(master->dev.of_node, "spi");
1918
1919 /* convention: dynamically assigned bus IDs count down from the max */
1920 if (master->bus_num < 0) {
1921 /* FIXME switch to an IDR based scheme, something like
1922 * I2C now uses, so we can't run out of "dynamic" IDs
1923 */
1924 master->bus_num = atomic_dec_return(&dyn_bus_id);
1925 dynamic = 1;
1926 }
1927
1928 INIT_LIST_HEAD(&master->queue);
1929 spin_lock_init(&master->queue_lock);
1930 spin_lock_init(&master->bus_lock_spinlock);
1931 mutex_init(&master->bus_lock_mutex);
1932 mutex_init(&master->io_mutex);
1933 master->bus_lock_flag = 0;
1934 init_completion(&master->xfer_completion);
1935 if (!master->max_dma_len)
1936 master->max_dma_len = INT_MAX;
1937
1938 /* register the device, then userspace will see it.
1939 * registration fails if the bus ID is in use.
1940 */
1941 dev_set_name(&master->dev, "spi%u", master->bus_num);
1942 status = device_add(&master->dev);
1943 if (status < 0)
1944 goto done;
1945 dev_dbg(dev, "registered master %s%s\n", dev_name(&master->dev),
1946 dynamic ? " (dynamic)" : "");
1947
1948 /* If we're using a queued driver, start the queue */
1949 if (master->transfer)
1950 dev_info(dev, "master is unqueued, this is deprecated\n");
1951 else {
1952 status = spi_master_initialize_queue(master);
1953 if (status) {
1954 device_del(&master->dev);
1955 goto done;
1956 }
1957 }
1958 /* add statistics */
1959 spin_lock_init(&master->statistics.lock);
1960
1961 mutex_lock(&board_lock);
1962 list_add_tail(&master->list, &spi_master_list);
1963 list_for_each_entry(bi, &board_list, list)
1964 spi_match_master_to_boardinfo(master, &bi->board_info);
1965 mutex_unlock(&board_lock);
1966
1967 /* Register devices from the device tree and ACPI */
1968 of_register_spi_devices(master);
1969 acpi_register_spi_devices(master);
1970done:
1971 return status;
1972}
1973EXPORT_SYMBOL_GPL(spi_register_master);
1974
1975static void devm_spi_unregister(struct device *dev, void *res)
1976{
1977 spi_unregister_master(*(struct spi_master **)res);
1978}
1979
1980/**
1981 * dev_spi_register_master - register managed SPI master controller
1982 * @dev: device managing SPI master
1983 * @master: initialized master, originally from spi_alloc_master()
1984 * Context: can sleep
1985 *
1986 * Register a SPI device as with spi_register_master() which will
1987 * automatically be unregister
1988 *
1989 * Return: zero on success, else a negative error code.
1990 */
1991int devm_spi_register_master(struct device *dev, struct spi_master *master)
1992{
1993 struct spi_master **ptr;
1994 int ret;
1995
1996 ptr = devres_alloc(devm_spi_unregister, sizeof(*ptr), GFP_KERNEL);
1997 if (!ptr)
1998 return -ENOMEM;
1999
2000 ret = spi_register_master(master);
2001 if (!ret) {
2002 *ptr = master;
2003 devres_add(dev, ptr);
2004 } else {
2005 devres_free(ptr);
2006 }
2007
2008 return ret;
2009}
2010EXPORT_SYMBOL_GPL(devm_spi_register_master);
2011
2012static int __unregister(struct device *dev, void *null)
2013{
2014 spi_unregister_device(to_spi_device(dev));
2015 return 0;
2016}
2017
2018/**
2019 * spi_unregister_master - unregister SPI master controller
2020 * @master: the master being unregistered
2021 * Context: can sleep
2022 *
2023 * This call is used only by SPI master controller drivers, which are the
2024 * only ones directly touching chip registers.
2025 *
2026 * This must be called from context that can sleep.
2027 */
2028void spi_unregister_master(struct spi_master *master)
2029{
2030 int dummy;
2031
2032 if (master->queued) {
2033 if (spi_destroy_queue(master))
2034 dev_err(&master->dev, "queue remove failed\n");
2035 }
2036
2037 mutex_lock(&board_lock);
2038 list_del(&master->list);
2039 mutex_unlock(&board_lock);
2040
2041 dummy = device_for_each_child(&master->dev, NULL, __unregister);
2042 device_unregister(&master->dev);
2043}
2044EXPORT_SYMBOL_GPL(spi_unregister_master);
2045
2046int spi_master_suspend(struct spi_master *master)
2047{
2048 int ret;
2049
2050 /* Basically no-ops for non-queued masters */
2051 if (!master->queued)
2052 return 0;
2053
2054 ret = spi_stop_queue(master);
2055 if (ret)
2056 dev_err(&master->dev, "queue stop failed\n");
2057
2058 return ret;
2059}
2060EXPORT_SYMBOL_GPL(spi_master_suspend);
2061
2062int spi_master_resume(struct spi_master *master)
2063{
2064 int ret;
2065
2066 if (!master->queued)
2067 return 0;
2068
2069 ret = spi_start_queue(master);
2070 if (ret)
2071 dev_err(&master->dev, "queue restart failed\n");
2072
2073 return ret;
2074}
2075EXPORT_SYMBOL_GPL(spi_master_resume);
2076
2077static int __spi_master_match(struct device *dev, const void *data)
2078{
2079 struct spi_master *m;
2080 const u16 *bus_num = data;
2081
2082 m = container_of(dev, struct spi_master, dev);
2083 return m->bus_num == *bus_num;
2084}
2085
2086/**
2087 * spi_busnum_to_master - look up master associated with bus_num
2088 * @bus_num: the master's bus number
2089 * Context: can sleep
2090 *
2091 * This call may be used with devices that are registered after
2092 * arch init time. It returns a refcounted pointer to the relevant
2093 * spi_master (which the caller must release), or NULL if there is
2094 * no such master registered.
2095 *
2096 * Return: the SPI master structure on success, else NULL.
2097 */
2098struct spi_master *spi_busnum_to_master(u16 bus_num)
2099{
2100 struct device *dev;
2101 struct spi_master *master = NULL;
2102
2103 dev = class_find_device(&spi_master_class, NULL, &bus_num,
2104 __spi_master_match);
2105 if (dev)
2106 master = container_of(dev, struct spi_master, dev);
2107 /* reference got in class_find_device */
2108 return master;
2109}
2110EXPORT_SYMBOL_GPL(spi_busnum_to_master);
2111
2112/*-------------------------------------------------------------------------*/
2113
2114/* Core methods for SPI resource management */
2115
2116/**
2117 * spi_res_alloc - allocate a spi resource that is life-cycle managed
2118 * during the processing of a spi_message while using
2119 * spi_transfer_one
2120 * @spi: the spi device for which we allocate memory
2121 * @release: the release code to execute for this resource
2122 * @size: size to alloc and return
2123 * @gfp: GFP allocation flags
2124 *
2125 * Return: the pointer to the allocated data
2126 *
2127 * This may get enhanced in the future to allocate from a memory pool
2128 * of the @spi_device or @spi_master to avoid repeated allocations.
2129 */
2130void *spi_res_alloc(struct spi_device *spi,
2131 spi_res_release_t release,
2132 size_t size, gfp_t gfp)
2133{
2134 struct spi_res *sres;
2135
2136 sres = kzalloc(sizeof(*sres) + size, gfp);
2137 if (!sres)
2138 return NULL;
2139
2140 INIT_LIST_HEAD(&sres->entry);
2141 sres->release = release;
2142
2143 return sres->data;
2144}
2145EXPORT_SYMBOL_GPL(spi_res_alloc);
2146
2147/**
2148 * spi_res_free - free an spi resource
2149 * @res: pointer to the custom data of a resource
2150 *
2151 */
2152void spi_res_free(void *res)
2153{
2154 struct spi_res *sres = container_of(res, struct spi_res, data);
2155
2156 if (!res)
2157 return;
2158
2159 WARN_ON(!list_empty(&sres->entry));
2160 kfree(sres);
2161}
2162EXPORT_SYMBOL_GPL(spi_res_free);
2163
2164/**
2165 * spi_res_add - add a spi_res to the spi_message
2166 * @message: the spi message
2167 * @res: the spi_resource
2168 */
2169void spi_res_add(struct spi_message *message, void *res)
2170{
2171 struct spi_res *sres = container_of(res, struct spi_res, data);
2172
2173 WARN_ON(!list_empty(&sres->entry));
2174 list_add_tail(&sres->entry, &message->resources);
2175}
2176EXPORT_SYMBOL_GPL(spi_res_add);
2177
2178/**
2179 * spi_res_release - release all spi resources for this message
2180 * @master: the @spi_master
2181 * @message: the @spi_message
2182 */
2183void spi_res_release(struct spi_master *master,
2184 struct spi_message *message)
2185{
2186 struct spi_res *res;
2187
2188 while (!list_empty(&message->resources)) {
2189 res = list_last_entry(&message->resources,
2190 struct spi_res, entry);
2191
2192 if (res->release)
2193 res->release(master, message, res->data);
2194
2195 list_del(&res->entry);
2196
2197 kfree(res);
2198 }
2199}
2200EXPORT_SYMBOL_GPL(spi_res_release);
2201
2202/*-------------------------------------------------------------------------*/
2203
2204/* Core methods for spi_message alterations */
2205
2206static void __spi_replace_transfers_release(struct spi_master *master,
2207 struct spi_message *msg,
2208 void *res)
2209{
2210 struct spi_replaced_transfers *rxfer = res;
2211 size_t i;
2212
2213 /* call extra callback if requested */
2214 if (rxfer->release)
2215 rxfer->release(master, msg, res);
2216
2217 /* insert replaced transfers back into the message */
2218 list_splice(&rxfer->replaced_transfers, rxfer->replaced_after);
2219
2220 /* remove the formerly inserted entries */
2221 for (i = 0; i < rxfer->inserted; i++)
2222 list_del(&rxfer->inserted_transfers[i].transfer_list);
2223}
2224
2225/**
2226 * spi_replace_transfers - replace transfers with several transfers
2227 * and register change with spi_message.resources
2228 * @msg: the spi_message we work upon
2229 * @xfer_first: the first spi_transfer we want to replace
2230 * @remove: number of transfers to remove
2231 * @insert: the number of transfers we want to insert instead
2232 * @release: extra release code necessary in some circumstances
2233 * @extradatasize: extra data to allocate (with alignment guarantees
2234 * of struct @spi_transfer)
2235 * @gfp: gfp flags
2236 *
2237 * Returns: pointer to @spi_replaced_transfers,
2238 * PTR_ERR(...) in case of errors.
2239 */
2240struct spi_replaced_transfers *spi_replace_transfers(
2241 struct spi_message *msg,
2242 struct spi_transfer *xfer_first,
2243 size_t remove,
2244 size_t insert,
2245 spi_replaced_release_t release,
2246 size_t extradatasize,
2247 gfp_t gfp)
2248{
2249 struct spi_replaced_transfers *rxfer;
2250 struct spi_transfer *xfer;
2251 size_t i;
2252
2253 /* allocate the structure using spi_res */
2254 rxfer = spi_res_alloc(msg->spi, __spi_replace_transfers_release,
2255 insert * sizeof(struct spi_transfer)
2256 + sizeof(struct spi_replaced_transfers)
2257 + extradatasize,
2258 gfp);
2259 if (!rxfer)
2260 return ERR_PTR(-ENOMEM);
2261
2262 /* the release code to invoke before running the generic release */
2263 rxfer->release = release;
2264
2265 /* assign extradata */
2266 if (extradatasize)
2267 rxfer->extradata =
2268 &rxfer->inserted_transfers[insert];
2269
2270 /* init the replaced_transfers list */
2271 INIT_LIST_HEAD(&rxfer->replaced_transfers);
2272
2273 /* assign the list_entry after which we should reinsert
2274 * the @replaced_transfers - it may be spi_message.messages!
2275 */
2276 rxfer->replaced_after = xfer_first->transfer_list.prev;
2277
2278 /* remove the requested number of transfers */
2279 for (i = 0; i < remove; i++) {
2280 /* if the entry after replaced_after it is msg->transfers
2281 * then we have been requested to remove more transfers
2282 * than are in the list
2283 */
2284 if (rxfer->replaced_after->next == &msg->transfers) {
2285 dev_err(&msg->spi->dev,
2286 "requested to remove more spi_transfers than are available\n");
2287 /* insert replaced transfers back into the message */
2288 list_splice(&rxfer->replaced_transfers,
2289 rxfer->replaced_after);
2290
2291 /* free the spi_replace_transfer structure */
2292 spi_res_free(rxfer);
2293
2294 /* and return with an error */
2295 return ERR_PTR(-EINVAL);
2296 }
2297
2298 /* remove the entry after replaced_after from list of
2299 * transfers and add it to list of replaced_transfers
2300 */
2301 list_move_tail(rxfer->replaced_after->next,
2302 &rxfer->replaced_transfers);
2303 }
2304
2305 /* create copy of the given xfer with identical settings
2306 * based on the first transfer to get removed
2307 */
2308 for (i = 0; i < insert; i++) {
2309 /* we need to run in reverse order */
2310 xfer = &rxfer->inserted_transfers[insert - 1 - i];
2311
2312 /* copy all spi_transfer data */
2313 memcpy(xfer, xfer_first, sizeof(*xfer));
2314
2315 /* add to list */
2316 list_add(&xfer->transfer_list, rxfer->replaced_after);
2317
2318 /* clear cs_change and delay_usecs for all but the last */
2319 if (i) {
2320 xfer->cs_change = false;
2321 xfer->delay_usecs = 0;
2322 }
2323 }
2324
2325 /* set up inserted */
2326 rxfer->inserted = insert;
2327
2328 /* and register it with spi_res/spi_message */
2329 spi_res_add(msg, rxfer);
2330
2331 return rxfer;
2332}
2333EXPORT_SYMBOL_GPL(spi_replace_transfers);
2334
2335static int __spi_split_transfer_maxsize(struct spi_master *master,
2336 struct spi_message *msg,
2337 struct spi_transfer **xferp,
2338 size_t maxsize,
2339 gfp_t gfp)
2340{
2341 struct spi_transfer *xfer = *xferp, *xfers;
2342 struct spi_replaced_transfers *srt;
2343 size_t offset;
2344 size_t count, i;
2345
2346 /* warn once about this fact that we are splitting a transfer */
2347 dev_warn_once(&msg->spi->dev,
2348 "spi_transfer of length %i exceed max length of %zu - needed to split transfers\n",
2349 xfer->len, maxsize);
2350
2351 /* calculate how many we have to replace */
2352 count = DIV_ROUND_UP(xfer->len, maxsize);
2353
2354 /* create replacement */
2355 srt = spi_replace_transfers(msg, xfer, 1, count, NULL, 0, gfp);
2356 if (IS_ERR(srt))
2357 return PTR_ERR(srt);
2358 xfers = srt->inserted_transfers;
2359
2360 /* now handle each of those newly inserted spi_transfers
2361 * note that the replacements spi_transfers all are preset
2362 * to the same values as *xferp, so tx_buf, rx_buf and len
2363 * are all identical (as well as most others)
2364 * so we just have to fix up len and the pointers.
2365 *
2366 * this also includes support for the depreciated
2367 * spi_message.is_dma_mapped interface
2368 */
2369
2370 /* the first transfer just needs the length modified, so we
2371 * run it outside the loop
2372 */
2373 xfers[0].len = min_t(size_t, maxsize, xfer[0].len);
2374
2375 /* all the others need rx_buf/tx_buf also set */
2376 for (i = 1, offset = maxsize; i < count; offset += maxsize, i++) {
2377 /* update rx_buf, tx_buf and dma */
2378 if (xfers[i].rx_buf)
2379 xfers[i].rx_buf += offset;
2380 if (xfers[i].rx_dma)
2381 xfers[i].rx_dma += offset;
2382 if (xfers[i].tx_buf)
2383 xfers[i].tx_buf += offset;
2384 if (xfers[i].tx_dma)
2385 xfers[i].tx_dma += offset;
2386
2387 /* update length */
2388 xfers[i].len = min(maxsize, xfers[i].len - offset);
2389 }
2390
2391 /* we set up xferp to the last entry we have inserted,
2392 * so that we skip those already split transfers
2393 */
2394 *xferp = &xfers[count - 1];
2395
2396 /* increment statistics counters */
2397 SPI_STATISTICS_INCREMENT_FIELD(&master->statistics,
2398 transfers_split_maxsize);
2399 SPI_STATISTICS_INCREMENT_FIELD(&msg->spi->statistics,
2400 transfers_split_maxsize);
2401
2402 return 0;
2403}
2404
2405/**
2406 * spi_split_tranfers_maxsize - split spi transfers into multiple transfers
2407 * when an individual transfer exceeds a
2408 * certain size
2409 * @master: the @spi_master for this transfer
2410 * @msg: the @spi_message to transform
2411 * @maxsize: the maximum when to apply this
2412 * @gfp: GFP allocation flags
2413 *
2414 * Return: status of transformation
2415 */
2416int spi_split_transfers_maxsize(struct spi_master *master,
2417 struct spi_message *msg,
2418 size_t maxsize,
2419 gfp_t gfp)
2420{
2421 struct spi_transfer *xfer;
2422 int ret;
2423
2424 /* iterate over the transfer_list,
2425 * but note that xfer is advanced to the last transfer inserted
2426 * to avoid checking sizes again unnecessarily (also xfer does
2427 * potentiall belong to a different list by the time the
2428 * replacement has happened
2429 */
2430 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
2431 if (xfer->len > maxsize) {
2432 ret = __spi_split_transfer_maxsize(
2433 master, msg, &xfer, maxsize, gfp);
2434 if (ret)
2435 return ret;
2436 }
2437 }
2438
2439 return 0;
2440}
2441EXPORT_SYMBOL_GPL(spi_split_transfers_maxsize);
2442
2443/*-------------------------------------------------------------------------*/
2444
2445/* Core methods for SPI master protocol drivers. Some of the
2446 * other core methods are currently defined as inline functions.
2447 */
2448
2449static int __spi_validate_bits_per_word(struct spi_master *master, u8 bits_per_word)
2450{
2451 if (master->bits_per_word_mask) {
2452 /* Only 32 bits fit in the mask */
2453 if (bits_per_word > 32)
2454 return -EINVAL;
2455 if (!(master->bits_per_word_mask &
2456 SPI_BPW_MASK(bits_per_word)))
2457 return -EINVAL;
2458 }
2459
2460 return 0;
2461}
2462
2463/**
2464 * spi_setup - setup SPI mode and clock rate
2465 * @spi: the device whose settings are being modified
2466 * Context: can sleep, and no requests are queued to the device
2467 *
2468 * SPI protocol drivers may need to update the transfer mode if the
2469 * device doesn't work with its default. They may likewise need
2470 * to update clock rates or word sizes from initial values. This function
2471 * changes those settings, and must be called from a context that can sleep.
2472 * Except for SPI_CS_HIGH, which takes effect immediately, the changes take
2473 * effect the next time the device is selected and data is transferred to
2474 * or from it. When this function returns, the spi device is deselected.
2475 *
2476 * Note that this call will fail if the protocol driver specifies an option
2477 * that the underlying controller or its driver does not support. For
2478 * example, not all hardware supports wire transfers using nine bit words,
2479 * LSB-first wire encoding, or active-high chipselects.
2480 *
2481 * Return: zero on success, else a negative error code.
2482 */
2483int spi_setup(struct spi_device *spi)
2484{
2485 unsigned bad_bits, ugly_bits;
2486 int status;
2487
2488 /* check mode to prevent that DUAL and QUAD set at the same time
2489 */
2490 if (((spi->mode & SPI_TX_DUAL) && (spi->mode & SPI_TX_QUAD)) ||
2491 ((spi->mode & SPI_RX_DUAL) && (spi->mode & SPI_RX_QUAD))) {
2492 dev_err(&spi->dev,
2493 "setup: can not select dual and quad at the same time\n");
2494 return -EINVAL;
2495 }
2496 /* if it is SPI_3WIRE mode, DUAL and QUAD should be forbidden
2497 */
2498 if ((spi->mode & SPI_3WIRE) && (spi->mode &
2499 (SPI_TX_DUAL | SPI_TX_QUAD | SPI_RX_DUAL | SPI_RX_QUAD)))
2500 return -EINVAL;
2501 /* help drivers fail *cleanly* when they need options
2502 * that aren't supported with their current master
2503 */
2504 bad_bits = spi->mode & ~spi->master->mode_bits;
2505 ugly_bits = bad_bits &
2506 (SPI_TX_DUAL | SPI_TX_QUAD | SPI_RX_DUAL | SPI_RX_QUAD);
2507 if (ugly_bits) {
2508 dev_warn(&spi->dev,
2509 "setup: ignoring unsupported mode bits %x\n",
2510 ugly_bits);
2511 spi->mode &= ~ugly_bits;
2512 bad_bits &= ~ugly_bits;
2513 }
2514 if (bad_bits) {
2515 dev_err(&spi->dev, "setup: unsupported mode bits %x\n",
2516 bad_bits);
2517 return -EINVAL;
2518 }
2519
2520 if (!spi->bits_per_word)
2521 spi->bits_per_word = 8;
2522
2523 status = __spi_validate_bits_per_word(spi->master, spi->bits_per_word);
2524 if (status)
2525 return status;
2526
2527 if (!spi->max_speed_hz)
2528 spi->max_speed_hz = spi->master->max_speed_hz;
2529
2530 if (spi->master->setup)
2531 status = spi->master->setup(spi);
2532
2533 spi_set_cs(spi, false);
2534
2535 dev_dbg(&spi->dev, "setup mode %d, %s%s%s%s%u bits/w, %u Hz max --> %d\n",
2536 (int) (spi->mode & (SPI_CPOL | SPI_CPHA)),
2537 (spi->mode & SPI_CS_HIGH) ? "cs_high, " : "",
2538 (spi->mode & SPI_LSB_FIRST) ? "lsb, " : "",
2539 (spi->mode & SPI_3WIRE) ? "3wire, " : "",
2540 (spi->mode & SPI_LOOP) ? "loopback, " : "",
2541 spi->bits_per_word, spi->max_speed_hz,
2542 status);
2543
2544 return status;
2545}
2546EXPORT_SYMBOL_GPL(spi_setup);
2547
2548static int __spi_validate(struct spi_device *spi, struct spi_message *message)
2549{
2550 struct spi_master *master = spi->master;
2551 struct spi_transfer *xfer;
2552 int w_size;
2553
2554 if (list_empty(&message->transfers))
2555 return -EINVAL;
2556
2557 /* Half-duplex links include original MicroWire, and ones with
2558 * only one data pin like SPI_3WIRE (switches direction) or where
2559 * either MOSI or MISO is missing. They can also be caused by
2560 * software limitations.
2561 */
2562 if ((master->flags & SPI_MASTER_HALF_DUPLEX)
2563 || (spi->mode & SPI_3WIRE)) {
2564 unsigned flags = master->flags;
2565
2566 list_for_each_entry(xfer, &message->transfers, transfer_list) {
2567 if (xfer->rx_buf && xfer->tx_buf)
2568 return -EINVAL;
2569 if ((flags & SPI_MASTER_NO_TX) && xfer->tx_buf)
2570 return -EINVAL;
2571 if ((flags & SPI_MASTER_NO_RX) && xfer->rx_buf)
2572 return -EINVAL;
2573 }
2574 }
2575
2576 /**
2577 * Set transfer bits_per_word and max speed as spi device default if
2578 * it is not set for this transfer.
2579 * Set transfer tx_nbits and rx_nbits as single transfer default
2580 * (SPI_NBITS_SINGLE) if it is not set for this transfer.
2581 */
2582 message->frame_length = 0;
2583 list_for_each_entry(xfer, &message->transfers, transfer_list) {
2584 message->frame_length += xfer->len;
2585 if (!xfer->bits_per_word)
2586 xfer->bits_per_word = spi->bits_per_word;
2587
2588 if (!xfer->speed_hz)
2589 xfer->speed_hz = spi->max_speed_hz;
2590 if (!xfer->speed_hz)
2591 xfer->speed_hz = master->max_speed_hz;
2592
2593 if (master->max_speed_hz &&
2594 xfer->speed_hz > master->max_speed_hz)
2595 xfer->speed_hz = master->max_speed_hz;
2596
2597 if (__spi_validate_bits_per_word(master, xfer->bits_per_word))
2598 return -EINVAL;
2599
2600 /*
2601 * SPI transfer length should be multiple of SPI word size
2602 * where SPI word size should be power-of-two multiple
2603 */
2604 if (xfer->bits_per_word <= 8)
2605 w_size = 1;
2606 else if (xfer->bits_per_word <= 16)
2607 w_size = 2;
2608 else
2609 w_size = 4;
2610
2611 /* No partial transfers accepted */
2612 if (xfer->len % w_size)
2613 return -EINVAL;
2614
2615 if (xfer->speed_hz && master->min_speed_hz &&
2616 xfer->speed_hz < master->min_speed_hz)
2617 return -EINVAL;
2618
2619 if (xfer->tx_buf && !xfer->tx_nbits)
2620 xfer->tx_nbits = SPI_NBITS_SINGLE;
2621 if (xfer->rx_buf && !xfer->rx_nbits)
2622 xfer->rx_nbits = SPI_NBITS_SINGLE;
2623 /* check transfer tx/rx_nbits:
2624 * 1. check the value matches one of single, dual and quad
2625 * 2. check tx/rx_nbits match the mode in spi_device
2626 */
2627 if (xfer->tx_buf) {
2628 if (xfer->tx_nbits != SPI_NBITS_SINGLE &&
2629 xfer->tx_nbits != SPI_NBITS_DUAL &&
2630 xfer->tx_nbits != SPI_NBITS_QUAD)
2631 return -EINVAL;
2632 if ((xfer->tx_nbits == SPI_NBITS_DUAL) &&
2633 !(spi->mode & (SPI_TX_DUAL | SPI_TX_QUAD)))
2634 return -EINVAL;
2635 if ((xfer->tx_nbits == SPI_NBITS_QUAD) &&
2636 !(spi->mode & SPI_TX_QUAD))
2637 return -EINVAL;
2638 }
2639 /* check transfer rx_nbits */
2640 if (xfer->rx_buf) {
2641 if (xfer->rx_nbits != SPI_NBITS_SINGLE &&
2642 xfer->rx_nbits != SPI_NBITS_DUAL &&
2643 xfer->rx_nbits != SPI_NBITS_QUAD)
2644 return -EINVAL;
2645 if ((xfer->rx_nbits == SPI_NBITS_DUAL) &&
2646 !(spi->mode & (SPI_RX_DUAL | SPI_RX_QUAD)))
2647 return -EINVAL;
2648 if ((xfer->rx_nbits == SPI_NBITS_QUAD) &&
2649 !(spi->mode & SPI_RX_QUAD))
2650 return -EINVAL;
2651 }
2652 }
2653
2654 message->status = -EINPROGRESS;
2655
2656 return 0;
2657}
2658
2659static int __spi_async(struct spi_device *spi, struct spi_message *message)
2660{
2661 struct spi_master *master = spi->master;
2662
2663 message->spi = spi;
2664
2665 SPI_STATISTICS_INCREMENT_FIELD(&master->statistics, spi_async);
2666 SPI_STATISTICS_INCREMENT_FIELD(&spi->statistics, spi_async);
2667
2668 trace_spi_message_submit(message);
2669
2670 return master->transfer(spi, message);
2671}
2672
2673/**
2674 * spi_async - asynchronous SPI transfer
2675 * @spi: device with which data will be exchanged
2676 * @message: describes the data transfers, including completion callback
2677 * Context: any (irqs may be blocked, etc)
2678 *
2679 * This call may be used in_irq and other contexts which can't sleep,
2680 * as well as from task contexts which can sleep.
2681 *
2682 * The completion callback is invoked in a context which can't sleep.
2683 * Before that invocation, the value of message->status is undefined.
2684 * When the callback is issued, message->status holds either zero (to
2685 * indicate complete success) or a negative error code. After that
2686 * callback returns, the driver which issued the transfer request may
2687 * deallocate the associated memory; it's no longer in use by any SPI
2688 * core or controller driver code.
2689 *
2690 * Note that although all messages to a spi_device are handled in
2691 * FIFO order, messages may go to different devices in other orders.
2692 * Some device might be higher priority, or have various "hard" access
2693 * time requirements, for example.
2694 *
2695 * On detection of any fault during the transfer, processing of
2696 * the entire message is aborted, and the device is deselected.
2697 * Until returning from the associated message completion callback,
2698 * no other spi_message queued to that device will be processed.
2699 * (This rule applies equally to all the synchronous transfer calls,
2700 * which are wrappers around this core asynchronous primitive.)
2701 *
2702 * Return: zero on success, else a negative error code.
2703 */
2704int spi_async(struct spi_device *spi, struct spi_message *message)
2705{
2706 struct spi_master *master = spi->master;
2707 int ret;
2708 unsigned long flags;
2709
2710 ret = __spi_validate(spi, message);
2711 if (ret != 0)
2712 return ret;
2713
2714 spin_lock_irqsave(&master->bus_lock_spinlock, flags);
2715
2716 if (master->bus_lock_flag)
2717 ret = -EBUSY;
2718 else
2719 ret = __spi_async(spi, message);
2720
2721 spin_unlock_irqrestore(&master->bus_lock_spinlock, flags);
2722
2723 return ret;
2724}
2725EXPORT_SYMBOL_GPL(spi_async);
2726
2727/**
2728 * spi_async_locked - version of spi_async with exclusive bus usage
2729 * @spi: device with which data will be exchanged
2730 * @message: describes the data transfers, including completion callback
2731 * Context: any (irqs may be blocked, etc)
2732 *
2733 * This call may be used in_irq and other contexts which can't sleep,
2734 * as well as from task contexts which can sleep.
2735 *
2736 * The completion callback is invoked in a context which can't sleep.
2737 * Before that invocation, the value of message->status is undefined.
2738 * When the callback is issued, message->status holds either zero (to
2739 * indicate complete success) or a negative error code. After that
2740 * callback returns, the driver which issued the transfer request may
2741 * deallocate the associated memory; it's no longer in use by any SPI
2742 * core or controller driver code.
2743 *
2744 * Note that although all messages to a spi_device are handled in
2745 * FIFO order, messages may go to different devices in other orders.
2746 * Some device might be higher priority, or have various "hard" access
2747 * time requirements, for example.
2748 *
2749 * On detection of any fault during the transfer, processing of
2750 * the entire message is aborted, and the device is deselected.
2751 * Until returning from the associated message completion callback,
2752 * no other spi_message queued to that device will be processed.
2753 * (This rule applies equally to all the synchronous transfer calls,
2754 * which are wrappers around this core asynchronous primitive.)
2755 *
2756 * Return: zero on success, else a negative error code.
2757 */
2758int spi_async_locked(struct spi_device *spi, struct spi_message *message)
2759{
2760 struct spi_master *master = spi->master;
2761 int ret;
2762 unsigned long flags;
2763
2764 ret = __spi_validate(spi, message);
2765 if (ret != 0)
2766 return ret;
2767
2768 spin_lock_irqsave(&master->bus_lock_spinlock, flags);
2769
2770 ret = __spi_async(spi, message);
2771
2772 spin_unlock_irqrestore(&master->bus_lock_spinlock, flags);
2773
2774 return ret;
2775
2776}
2777EXPORT_SYMBOL_GPL(spi_async_locked);
2778
2779
2780int spi_flash_read(struct spi_device *spi,
2781 struct spi_flash_read_message *msg)
2782
2783{
2784 struct spi_master *master = spi->master;
2785 struct device *rx_dev = NULL;
2786 int ret;
2787
2788 if ((msg->opcode_nbits == SPI_NBITS_DUAL ||
2789 msg->addr_nbits == SPI_NBITS_DUAL) &&
2790 !(spi->mode & (SPI_TX_DUAL | SPI_TX_QUAD)))
2791 return -EINVAL;
2792 if ((msg->opcode_nbits == SPI_NBITS_QUAD ||
2793 msg->addr_nbits == SPI_NBITS_QUAD) &&
2794 !(spi->mode & SPI_TX_QUAD))
2795 return -EINVAL;
2796 if (msg->data_nbits == SPI_NBITS_DUAL &&
2797 !(spi->mode & (SPI_RX_DUAL | SPI_RX_QUAD)))
2798 return -EINVAL;
2799 if (msg->data_nbits == SPI_NBITS_QUAD &&
2800 !(spi->mode & SPI_RX_QUAD))
2801 return -EINVAL;
2802
2803 if (master->auto_runtime_pm) {
2804 ret = pm_runtime_get_sync(master->dev.parent);
2805 if (ret < 0) {
2806 dev_err(&master->dev, "Failed to power device: %d\n",
2807 ret);
2808 return ret;
2809 }
2810 }
2811
2812 mutex_lock(&master->bus_lock_mutex);
2813 mutex_lock(&master->io_mutex);
2814 if (master->dma_rx) {
2815 rx_dev = master->dma_rx->device->dev;
2816 ret = spi_map_buf(master, rx_dev, &msg->rx_sg,
2817 msg->buf, msg->len,
2818 DMA_FROM_DEVICE);
2819 if (!ret)
2820 msg->cur_msg_mapped = true;
2821 }
2822 ret = master->spi_flash_read(spi, msg);
2823 if (msg->cur_msg_mapped)
2824 spi_unmap_buf(master, rx_dev, &msg->rx_sg,
2825 DMA_FROM_DEVICE);
2826 mutex_unlock(&master->io_mutex);
2827 mutex_unlock(&master->bus_lock_mutex);
2828
2829 if (master->auto_runtime_pm)
2830 pm_runtime_put(master->dev.parent);
2831
2832 return ret;
2833}
2834EXPORT_SYMBOL_GPL(spi_flash_read);
2835
2836/*-------------------------------------------------------------------------*/
2837
2838/* Utility methods for SPI master protocol drivers, layered on
2839 * top of the core. Some other utility methods are defined as
2840 * inline functions.
2841 */
2842
2843static void spi_complete(void *arg)
2844{
2845 complete(arg);
2846}
2847
2848static int __spi_sync(struct spi_device *spi, struct spi_message *message)
2849{
2850 DECLARE_COMPLETION_ONSTACK(done);
2851 int status;
2852 struct spi_master *master = spi->master;
2853 unsigned long flags;
2854
2855 status = __spi_validate(spi, message);
2856 if (status != 0)
2857 return status;
2858
2859 message->complete = spi_complete;
2860 message->context = &done;
2861 message->spi = spi;
2862
2863 SPI_STATISTICS_INCREMENT_FIELD(&master->statistics, spi_sync);
2864 SPI_STATISTICS_INCREMENT_FIELD(&spi->statistics, spi_sync);
2865
2866 /* If we're not using the legacy transfer method then we will
2867 * try to transfer in the calling context so special case.
2868 * This code would be less tricky if we could remove the
2869 * support for driver implemented message queues.
2870 */
2871 if (master->transfer == spi_queued_transfer) {
2872 spin_lock_irqsave(&master->bus_lock_spinlock, flags);
2873
2874 trace_spi_message_submit(message);
2875
2876 status = __spi_queued_transfer(spi, message, false);
2877
2878 spin_unlock_irqrestore(&master->bus_lock_spinlock, flags);
2879 } else {
2880 status = spi_async_locked(spi, message);
2881 }
2882
2883 if (status == 0) {
2884 /* Push out the messages in the calling context if we
2885 * can.
2886 */
2887 if (master->transfer == spi_queued_transfer) {
2888 SPI_STATISTICS_INCREMENT_FIELD(&master->statistics,
2889 spi_sync_immediate);
2890 SPI_STATISTICS_INCREMENT_FIELD(&spi->statistics,
2891 spi_sync_immediate);
2892 __spi_pump_messages(master, false);
2893 }
2894
2895 wait_for_completion(&done);
2896 status = message->status;
2897 }
2898 message->context = NULL;
2899 return status;
2900}
2901
2902/**
2903 * spi_sync - blocking/synchronous SPI data transfers
2904 * @spi: device with which data will be exchanged
2905 * @message: describes the data transfers
2906 * Context: can sleep
2907 *
2908 * This call may only be used from a context that may sleep. The sleep
2909 * is non-interruptible, and has no timeout. Low-overhead controller
2910 * drivers may DMA directly into and out of the message buffers.
2911 *
2912 * Note that the SPI device's chip select is active during the message,
2913 * and then is normally disabled between messages. Drivers for some
2914 * frequently-used devices may want to minimize costs of selecting a chip,
2915 * by leaving it selected in anticipation that the next message will go
2916 * to the same chip. (That may increase power usage.)
2917 *
2918 * Also, the caller is guaranteeing that the memory associated with the
2919 * message will not be freed before this call returns.
2920 *
2921 * Return: zero on success, else a negative error code.
2922 */
2923int spi_sync(struct spi_device *spi, struct spi_message *message)
2924{
2925 int ret;
2926
2927 mutex_lock(&spi->master->bus_lock_mutex);
2928 ret = __spi_sync(spi, message);
2929 mutex_unlock(&spi->master->bus_lock_mutex);
2930
2931 return ret;
2932}
2933EXPORT_SYMBOL_GPL(spi_sync);
2934
2935/**
2936 * spi_sync_locked - version of spi_sync with exclusive bus usage
2937 * @spi: device with which data will be exchanged
2938 * @message: describes the data transfers
2939 * Context: can sleep
2940 *
2941 * This call may only be used from a context that may sleep. The sleep
2942 * is non-interruptible, and has no timeout. Low-overhead controller
2943 * drivers may DMA directly into and out of the message buffers.
2944 *
2945 * This call should be used by drivers that require exclusive access to the
2946 * SPI bus. It has to be preceded by a spi_bus_lock call. The SPI bus must
2947 * be released by a spi_bus_unlock call when the exclusive access is over.
2948 *
2949 * Return: zero on success, else a negative error code.
2950 */
2951int spi_sync_locked(struct spi_device *spi, struct spi_message *message)
2952{
2953 return __spi_sync(spi, message);
2954}
2955EXPORT_SYMBOL_GPL(spi_sync_locked);
2956
2957/**
2958 * spi_bus_lock - obtain a lock for exclusive SPI bus usage
2959 * @master: SPI bus master that should be locked for exclusive bus access
2960 * Context: can sleep
2961 *
2962 * This call may only be used from a context that may sleep. The sleep
2963 * is non-interruptible, and has no timeout.
2964 *
2965 * This call should be used by drivers that require exclusive access to the
2966 * SPI bus. The SPI bus must be released by a spi_bus_unlock call when the
2967 * exclusive access is over. Data transfer must be done by spi_sync_locked
2968 * and spi_async_locked calls when the SPI bus lock is held.
2969 *
2970 * Return: always zero.
2971 */
2972int spi_bus_lock(struct spi_master *master)
2973{
2974 unsigned long flags;
2975
2976 mutex_lock(&master->bus_lock_mutex);
2977
2978 spin_lock_irqsave(&master->bus_lock_spinlock, flags);
2979 master->bus_lock_flag = 1;
2980 spin_unlock_irqrestore(&master->bus_lock_spinlock, flags);
2981
2982 /* mutex remains locked until spi_bus_unlock is called */
2983
2984 return 0;
2985}
2986EXPORT_SYMBOL_GPL(spi_bus_lock);
2987
2988/**
2989 * spi_bus_unlock - release the lock for exclusive SPI bus usage
2990 * @master: SPI bus master that was locked for exclusive bus access
2991 * Context: can sleep
2992 *
2993 * This call may only be used from a context that may sleep. The sleep
2994 * is non-interruptible, and has no timeout.
2995 *
2996 * This call releases an SPI bus lock previously obtained by an spi_bus_lock
2997 * call.
2998 *
2999 * Return: always zero.
3000 */
3001int spi_bus_unlock(struct spi_master *master)
3002{
3003 master->bus_lock_flag = 0;
3004
3005 mutex_unlock(&master->bus_lock_mutex);
3006
3007 return 0;
3008}
3009EXPORT_SYMBOL_GPL(spi_bus_unlock);
3010
3011/* portable code must never pass more than 32 bytes */
3012#define SPI_BUFSIZ max(32, SMP_CACHE_BYTES)
3013
3014static u8 *buf;
3015
3016/**
3017 * spi_write_then_read - SPI synchronous write followed by read
3018 * @spi: device with which data will be exchanged
3019 * @txbuf: data to be written (need not be dma-safe)
3020 * @n_tx: size of txbuf, in bytes
3021 * @rxbuf: buffer into which data will be read (need not be dma-safe)
3022 * @n_rx: size of rxbuf, in bytes
3023 * Context: can sleep
3024 *
3025 * This performs a half duplex MicroWire style transaction with the
3026 * device, sending txbuf and then reading rxbuf. The return value
3027 * is zero for success, else a negative errno status code.
3028 * This call may only be used from a context that may sleep.
3029 *
3030 * Parameters to this routine are always copied using a small buffer;
3031 * portable code should never use this for more than 32 bytes.
3032 * Performance-sensitive or bulk transfer code should instead use
3033 * spi_{async,sync}() calls with dma-safe buffers.
3034 *
3035 * Return: zero on success, else a negative error code.
3036 */
3037int spi_write_then_read(struct spi_device *spi,
3038 const void *txbuf, unsigned n_tx,
3039 void *rxbuf, unsigned n_rx)
3040{
3041 static DEFINE_MUTEX(lock);
3042
3043 int status;
3044 struct spi_message message;
3045 struct spi_transfer x[2];
3046 u8 *local_buf;
3047
3048 /* Use preallocated DMA-safe buffer if we can. We can't avoid
3049 * copying here, (as a pure convenience thing), but we can
3050 * keep heap costs out of the hot path unless someone else is
3051 * using the pre-allocated buffer or the transfer is too large.
3052 */
3053 if ((n_tx + n_rx) > SPI_BUFSIZ || !mutex_trylock(&lock)) {
3054 local_buf = kmalloc(max((unsigned)SPI_BUFSIZ, n_tx + n_rx),
3055 GFP_KERNEL | GFP_DMA);
3056 if (!local_buf)
3057 return -ENOMEM;
3058 } else {
3059 local_buf = buf;
3060 }
3061
3062 spi_message_init(&message);
3063 memset(x, 0, sizeof(x));
3064 if (n_tx) {
3065 x[0].len = n_tx;
3066 spi_message_add_tail(&x[0], &message);
3067 }
3068 if (n_rx) {
3069 x[1].len = n_rx;
3070 spi_message_add_tail(&x[1], &message);
3071 }
3072
3073 memcpy(local_buf, txbuf, n_tx);
3074 x[0].tx_buf = local_buf;
3075 x[1].rx_buf = local_buf + n_tx;
3076
3077 /* do the i/o */
3078 status = spi_sync(spi, &message);
3079 if (status == 0)
3080 memcpy(rxbuf, x[1].rx_buf, n_rx);
3081
3082 if (x[0].tx_buf == buf)
3083 mutex_unlock(&lock);
3084 else
3085 kfree(local_buf);
3086
3087 return status;
3088}
3089EXPORT_SYMBOL_GPL(spi_write_then_read);
3090
3091/*-------------------------------------------------------------------------*/
3092
3093#if IS_ENABLED(CONFIG_OF_DYNAMIC)
3094static int __spi_of_device_match(struct device *dev, void *data)
3095{
3096 return dev->of_node == data;
3097}
3098
3099/* must call put_device() when done with returned spi_device device */
3100static struct spi_device *of_find_spi_device_by_node(struct device_node *node)
3101{
3102 struct device *dev = bus_find_device(&spi_bus_type, NULL, node,
3103 __spi_of_device_match);
3104 return dev ? to_spi_device(dev) : NULL;
3105}
3106
3107static int __spi_of_master_match(struct device *dev, const void *data)
3108{
3109 return dev->of_node == data;
3110}
3111
3112/* the spi masters are not using spi_bus, so we find it with another way */
3113static struct spi_master *of_find_spi_master_by_node(struct device_node *node)
3114{
3115 struct device *dev;
3116
3117 dev = class_find_device(&spi_master_class, NULL, node,
3118 __spi_of_master_match);
3119 if (!dev)
3120 return NULL;
3121
3122 /* reference got in class_find_device */
3123 return container_of(dev, struct spi_master, dev);
3124}
3125
3126static int of_spi_notify(struct notifier_block *nb, unsigned long action,
3127 void *arg)
3128{
3129 struct of_reconfig_data *rd = arg;
3130 struct spi_master *master;
3131 struct spi_device *spi;
3132
3133 switch (of_reconfig_get_state_change(action, arg)) {
3134 case OF_RECONFIG_CHANGE_ADD:
3135 master = of_find_spi_master_by_node(rd->dn->parent);
3136 if (master == NULL)
3137 return NOTIFY_OK; /* not for us */
3138
3139 if (of_node_test_and_set_flag(rd->dn, OF_POPULATED)) {
3140 put_device(&master->dev);
3141 return NOTIFY_OK;
3142 }
3143
3144 spi = of_register_spi_device(master, rd->dn);
3145 put_device(&master->dev);
3146
3147 if (IS_ERR(spi)) {
3148 pr_err("%s: failed to create for '%s'\n",
3149 __func__, rd->dn->full_name);
3150 of_node_clear_flag(rd->dn, OF_POPULATED);
3151 return notifier_from_errno(PTR_ERR(spi));
3152 }
3153 break;
3154
3155 case OF_RECONFIG_CHANGE_REMOVE:
3156 /* already depopulated? */
3157 if (!of_node_check_flag(rd->dn, OF_POPULATED))
3158 return NOTIFY_OK;
3159
3160 /* find our device by node */
3161 spi = of_find_spi_device_by_node(rd->dn);
3162 if (spi == NULL)
3163 return NOTIFY_OK; /* no? not meant for us */
3164
3165 /* unregister takes one ref away */
3166 spi_unregister_device(spi);
3167
3168 /* and put the reference of the find */
3169 put_device(&spi->dev);
3170 break;
3171 }
3172
3173 return NOTIFY_OK;
3174}
3175
3176static struct notifier_block spi_of_notifier = {
3177 .notifier_call = of_spi_notify,
3178};
3179#else /* IS_ENABLED(CONFIG_OF_DYNAMIC) */
3180extern struct notifier_block spi_of_notifier;
3181#endif /* IS_ENABLED(CONFIG_OF_DYNAMIC) */
3182
3183#if IS_ENABLED(CONFIG_ACPI)
3184static int spi_acpi_master_match(struct device *dev, const void *data)
3185{
3186 return ACPI_COMPANION(dev->parent) == data;
3187}
3188
3189static int spi_acpi_device_match(struct device *dev, void *data)
3190{
3191 return ACPI_COMPANION(dev) == data;
3192}
3193
3194static struct spi_master *acpi_spi_find_master_by_adev(struct acpi_device *adev)
3195{
3196 struct device *dev;
3197
3198 dev = class_find_device(&spi_master_class, NULL, adev,
3199 spi_acpi_master_match);
3200 if (!dev)
3201 return NULL;
3202
3203 return container_of(dev, struct spi_master, dev);
3204}
3205
3206static struct spi_device *acpi_spi_find_device_by_adev(struct acpi_device *adev)
3207{
3208 struct device *dev;
3209
3210 dev = bus_find_device(&spi_bus_type, NULL, adev, spi_acpi_device_match);
3211
3212 return dev ? to_spi_device(dev) : NULL;
3213}
3214
3215static int acpi_spi_notify(struct notifier_block *nb, unsigned long value,
3216 void *arg)
3217{
3218 struct acpi_device *adev = arg;
3219 struct spi_master *master;
3220 struct spi_device *spi;
3221
3222 switch (value) {
3223 case ACPI_RECONFIG_DEVICE_ADD:
3224 master = acpi_spi_find_master_by_adev(adev->parent);
3225 if (!master)
3226 break;
3227
3228 acpi_register_spi_device(master, adev);
3229 put_device(&master->dev);
3230 break;
3231 case ACPI_RECONFIG_DEVICE_REMOVE:
3232 if (!acpi_device_enumerated(adev))
3233 break;
3234
3235 spi = acpi_spi_find_device_by_adev(adev);
3236 if (!spi)
3237 break;
3238
3239 spi_unregister_device(spi);
3240 put_device(&spi->dev);
3241 break;
3242 }
3243
3244 return NOTIFY_OK;
3245}
3246
3247static struct notifier_block spi_acpi_notifier = {
3248 .notifier_call = acpi_spi_notify,
3249};
3250#else
3251extern struct notifier_block spi_acpi_notifier;
3252#endif
3253
3254static int __init spi_init(void)
3255{
3256 int status;
3257
3258 buf = kmalloc(SPI_BUFSIZ, GFP_KERNEL);
3259 if (!buf) {
3260 status = -ENOMEM;
3261 goto err0;
3262 }
3263
3264 status = bus_register(&spi_bus_type);
3265 if (status < 0)
3266 goto err1;
3267
3268 status = class_register(&spi_master_class);
3269 if (status < 0)
3270 goto err2;
3271
3272 if (IS_ENABLED(CONFIG_OF_DYNAMIC))
3273 WARN_ON(of_reconfig_notifier_register(&spi_of_notifier));
3274 if (IS_ENABLED(CONFIG_ACPI))
3275 WARN_ON(acpi_reconfig_notifier_register(&spi_acpi_notifier));
3276
3277 return 0;
3278
3279err2:
3280 bus_unregister(&spi_bus_type);
3281err1:
3282 kfree(buf);
3283 buf = NULL;
3284err0:
3285 return status;
3286}
3287
3288/* board_info is normally registered in arch_initcall(),
3289 * but even essential drivers wait till later
3290 *
3291 * REVISIT only boardinfo really needs static linking. the rest (device and
3292 * driver registration) _could_ be dynamically linked (modular) ... costs
3293 * include needing to have boardinfo data structures be much more public.
3294 */
3295postcore_initcall(spi_init);
3296