Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * mm/page-writeback.c
4 *
5 * Copyright (C) 2002, Linus Torvalds.
6 * Copyright (C) 2007 Red Hat, Inc., Peter Zijlstra
7 *
8 * Contains functions related to writing back dirty pages at the
9 * address_space level.
10 *
11 * 10Apr2002 Andrew Morton
12 * Initial version
13 */
14
15#include <linux/kernel.h>
16#include <linux/export.h>
17#include <linux/spinlock.h>
18#include <linux/fs.h>
19#include <linux/mm.h>
20#include <linux/swap.h>
21#include <linux/slab.h>
22#include <linux/pagemap.h>
23#include <linux/writeback.h>
24#include <linux/init.h>
25#include <linux/backing-dev.h>
26#include <linux/task_io_accounting_ops.h>
27#include <linux/blkdev.h>
28#include <linux/mpage.h>
29#include <linux/rmap.h>
30#include <linux/percpu.h>
31#include <linux/smp.h>
32#include <linux/sysctl.h>
33#include <linux/cpu.h>
34#include <linux/syscalls.h>
35#include <linux/buffer_head.h> /* __set_page_dirty_buffers */
36#include <linux/pagevec.h>
37#include <linux/timer.h>
38#include <linux/sched/rt.h>
39#include <linux/sched/signal.h>
40#include <linux/mm_inline.h>
41#include <trace/events/writeback.h>
42
43#include "internal.h"
44
45/*
46 * Sleep at most 200ms at a time in balance_dirty_pages().
47 */
48#define MAX_PAUSE max(HZ/5, 1)
49
50/*
51 * Try to keep balance_dirty_pages() call intervals higher than this many pages
52 * by raising pause time to max_pause when falls below it.
53 */
54#define DIRTY_POLL_THRESH (128 >> (PAGE_SHIFT - 10))
55
56/*
57 * Estimate write bandwidth at 200ms intervals.
58 */
59#define BANDWIDTH_INTERVAL max(HZ/5, 1)
60
61#define RATELIMIT_CALC_SHIFT 10
62
63/*
64 * After a CPU has dirtied this many pages, balance_dirty_pages_ratelimited
65 * will look to see if it needs to force writeback or throttling.
66 */
67static long ratelimit_pages = 32;
68
69/* The following parameters are exported via /proc/sys/vm */
70
71/*
72 * Start background writeback (via writeback threads) at this percentage
73 */
74int dirty_background_ratio = 10;
75
76/*
77 * dirty_background_bytes starts at 0 (disabled) so that it is a function of
78 * dirty_background_ratio * the amount of dirtyable memory
79 */
80unsigned long dirty_background_bytes;
81
82/*
83 * free highmem will not be subtracted from the total free memory
84 * for calculating free ratios if vm_highmem_is_dirtyable is true
85 */
86int vm_highmem_is_dirtyable;
87
88/*
89 * The generator of dirty data starts writeback at this percentage
90 */
91int vm_dirty_ratio = 20;
92
93/*
94 * vm_dirty_bytes starts at 0 (disabled) so that it is a function of
95 * vm_dirty_ratio * the amount of dirtyable memory
96 */
97unsigned long vm_dirty_bytes;
98
99/*
100 * The interval between `kupdate'-style writebacks
101 */
102unsigned int dirty_writeback_interval = 5 * 100; /* centiseconds */
103
104EXPORT_SYMBOL_GPL(dirty_writeback_interval);
105
106/*
107 * The longest time for which data is allowed to remain dirty
108 */
109unsigned int dirty_expire_interval = 30 * 100; /* centiseconds */
110
111/*
112 * Flag that makes the machine dump writes/reads and block dirtyings.
113 */
114int block_dump;
115
116/*
117 * Flag that puts the machine in "laptop mode". Doubles as a timeout in jiffies:
118 * a full sync is triggered after this time elapses without any disk activity.
119 */
120int laptop_mode;
121
122EXPORT_SYMBOL(laptop_mode);
123
124/* End of sysctl-exported parameters */
125
126struct wb_domain global_wb_domain;
127
128/* consolidated parameters for balance_dirty_pages() and its subroutines */
129struct dirty_throttle_control {
130#ifdef CONFIG_CGROUP_WRITEBACK
131 struct wb_domain *dom;
132 struct dirty_throttle_control *gdtc; /* only set in memcg dtc's */
133#endif
134 struct bdi_writeback *wb;
135 struct fprop_local_percpu *wb_completions;
136
137 unsigned long avail; /* dirtyable */
138 unsigned long dirty; /* file_dirty + write + nfs */
139 unsigned long thresh; /* dirty threshold */
140 unsigned long bg_thresh; /* dirty background threshold */
141
142 unsigned long wb_dirty; /* per-wb counterparts */
143 unsigned long wb_thresh;
144 unsigned long wb_bg_thresh;
145
146 unsigned long pos_ratio;
147};
148
149/*
150 * Length of period for aging writeout fractions of bdis. This is an
151 * arbitrarily chosen number. The longer the period, the slower fractions will
152 * reflect changes in current writeout rate.
153 */
154#define VM_COMPLETIONS_PERIOD_LEN (3*HZ)
155
156#ifdef CONFIG_CGROUP_WRITEBACK
157
158#define GDTC_INIT(__wb) .wb = (__wb), \
159 .dom = &global_wb_domain, \
160 .wb_completions = &(__wb)->completions
161
162#define GDTC_INIT_NO_WB .dom = &global_wb_domain
163
164#define MDTC_INIT(__wb, __gdtc) .wb = (__wb), \
165 .dom = mem_cgroup_wb_domain(__wb), \
166 .wb_completions = &(__wb)->memcg_completions, \
167 .gdtc = __gdtc
168
169static bool mdtc_valid(struct dirty_throttle_control *dtc)
170{
171 return dtc->dom;
172}
173
174static struct wb_domain *dtc_dom(struct dirty_throttle_control *dtc)
175{
176 return dtc->dom;
177}
178
179static struct dirty_throttle_control *mdtc_gdtc(struct dirty_throttle_control *mdtc)
180{
181 return mdtc->gdtc;
182}
183
184static struct fprop_local_percpu *wb_memcg_completions(struct bdi_writeback *wb)
185{
186 return &wb->memcg_completions;
187}
188
189static void wb_min_max_ratio(struct bdi_writeback *wb,
190 unsigned long *minp, unsigned long *maxp)
191{
192 unsigned long this_bw = wb->avg_write_bandwidth;
193 unsigned long tot_bw = atomic_long_read(&wb->bdi->tot_write_bandwidth);
194 unsigned long long min = wb->bdi->min_ratio;
195 unsigned long long max = wb->bdi->max_ratio;
196
197 /*
198 * @wb may already be clean by the time control reaches here and
199 * the total may not include its bw.
200 */
201 if (this_bw < tot_bw) {
202 if (min) {
203 min *= this_bw;
204 do_div(min, tot_bw);
205 }
206 if (max < 100) {
207 max *= this_bw;
208 do_div(max, tot_bw);
209 }
210 }
211
212 *minp = min;
213 *maxp = max;
214}
215
216#else /* CONFIG_CGROUP_WRITEBACK */
217
218#define GDTC_INIT(__wb) .wb = (__wb), \
219 .wb_completions = &(__wb)->completions
220#define GDTC_INIT_NO_WB
221#define MDTC_INIT(__wb, __gdtc)
222
223static bool mdtc_valid(struct dirty_throttle_control *dtc)
224{
225 return false;
226}
227
228static struct wb_domain *dtc_dom(struct dirty_throttle_control *dtc)
229{
230 return &global_wb_domain;
231}
232
233static struct dirty_throttle_control *mdtc_gdtc(struct dirty_throttle_control *mdtc)
234{
235 return NULL;
236}
237
238static struct fprop_local_percpu *wb_memcg_completions(struct bdi_writeback *wb)
239{
240 return NULL;
241}
242
243static void wb_min_max_ratio(struct bdi_writeback *wb,
244 unsigned long *minp, unsigned long *maxp)
245{
246 *minp = wb->bdi->min_ratio;
247 *maxp = wb->bdi->max_ratio;
248}
249
250#endif /* CONFIG_CGROUP_WRITEBACK */
251
252/*
253 * In a memory zone, there is a certain amount of pages we consider
254 * available for the page cache, which is essentially the number of
255 * free and reclaimable pages, minus some zone reserves to protect
256 * lowmem and the ability to uphold the zone's watermarks without
257 * requiring writeback.
258 *
259 * This number of dirtyable pages is the base value of which the
260 * user-configurable dirty ratio is the effictive number of pages that
261 * are allowed to be actually dirtied. Per individual zone, or
262 * globally by using the sum of dirtyable pages over all zones.
263 *
264 * Because the user is allowed to specify the dirty limit globally as
265 * absolute number of bytes, calculating the per-zone dirty limit can
266 * require translating the configured limit into a percentage of
267 * global dirtyable memory first.
268 */
269
270/**
271 * node_dirtyable_memory - number of dirtyable pages in a node
272 * @pgdat: the node
273 *
274 * Return: the node's number of pages potentially available for dirty
275 * page cache. This is the base value for the per-node dirty limits.
276 */
277static unsigned long node_dirtyable_memory(struct pglist_data *pgdat)
278{
279 unsigned long nr_pages = 0;
280 int z;
281
282 for (z = 0; z < MAX_NR_ZONES; z++) {
283 struct zone *zone = pgdat->node_zones + z;
284
285 if (!populated_zone(zone))
286 continue;
287
288 nr_pages += zone_page_state(zone, NR_FREE_PAGES);
289 }
290
291 /*
292 * Pages reserved for the kernel should not be considered
293 * dirtyable, to prevent a situation where reclaim has to
294 * clean pages in order to balance the zones.
295 */
296 nr_pages -= min(nr_pages, pgdat->totalreserve_pages);
297
298 nr_pages += node_page_state(pgdat, NR_INACTIVE_FILE);
299 nr_pages += node_page_state(pgdat, NR_ACTIVE_FILE);
300
301 return nr_pages;
302}
303
304static unsigned long highmem_dirtyable_memory(unsigned long total)
305{
306#ifdef CONFIG_HIGHMEM
307 int node;
308 unsigned long x = 0;
309 int i;
310
311 for_each_node_state(node, N_HIGH_MEMORY) {
312 for (i = ZONE_NORMAL + 1; i < MAX_NR_ZONES; i++) {
313 struct zone *z;
314 unsigned long nr_pages;
315
316 if (!is_highmem_idx(i))
317 continue;
318
319 z = &NODE_DATA(node)->node_zones[i];
320 if (!populated_zone(z))
321 continue;
322
323 nr_pages = zone_page_state(z, NR_FREE_PAGES);
324 /* watch for underflows */
325 nr_pages -= min(nr_pages, high_wmark_pages(z));
326 nr_pages += zone_page_state(z, NR_ZONE_INACTIVE_FILE);
327 nr_pages += zone_page_state(z, NR_ZONE_ACTIVE_FILE);
328 x += nr_pages;
329 }
330 }
331
332 /*
333 * Unreclaimable memory (kernel memory or anonymous memory
334 * without swap) can bring down the dirtyable pages below
335 * the zone's dirty balance reserve and the above calculation
336 * will underflow. However we still want to add in nodes
337 * which are below threshold (negative values) to get a more
338 * accurate calculation but make sure that the total never
339 * underflows.
340 */
341 if ((long)x < 0)
342 x = 0;
343
344 /*
345 * Make sure that the number of highmem pages is never larger
346 * than the number of the total dirtyable memory. This can only
347 * occur in very strange VM situations but we want to make sure
348 * that this does not occur.
349 */
350 return min(x, total);
351#else
352 return 0;
353#endif
354}
355
356/**
357 * global_dirtyable_memory - number of globally dirtyable pages
358 *
359 * Return: the global number of pages potentially available for dirty
360 * page cache. This is the base value for the global dirty limits.
361 */
362static unsigned long global_dirtyable_memory(void)
363{
364 unsigned long x;
365
366 x = global_zone_page_state(NR_FREE_PAGES);
367 /*
368 * Pages reserved for the kernel should not be considered
369 * dirtyable, to prevent a situation where reclaim has to
370 * clean pages in order to balance the zones.
371 */
372 x -= min(x, totalreserve_pages);
373
374 x += global_node_page_state(NR_INACTIVE_FILE);
375 x += global_node_page_state(NR_ACTIVE_FILE);
376
377 if (!vm_highmem_is_dirtyable)
378 x -= highmem_dirtyable_memory(x);
379
380 return x + 1; /* Ensure that we never return 0 */
381}
382
383/**
384 * domain_dirty_limits - calculate thresh and bg_thresh for a wb_domain
385 * @dtc: dirty_throttle_control of interest
386 *
387 * Calculate @dtc->thresh and ->bg_thresh considering
388 * vm_dirty_{bytes|ratio} and dirty_background_{bytes|ratio}. The caller
389 * must ensure that @dtc->avail is set before calling this function. The
390 * dirty limits will be lifted by 1/4 for PF_LESS_THROTTLE (ie. nfsd) and
391 * real-time tasks.
392 */
393static void domain_dirty_limits(struct dirty_throttle_control *dtc)
394{
395 const unsigned long available_memory = dtc->avail;
396 struct dirty_throttle_control *gdtc = mdtc_gdtc(dtc);
397 unsigned long bytes = vm_dirty_bytes;
398 unsigned long bg_bytes = dirty_background_bytes;
399 /* convert ratios to per-PAGE_SIZE for higher precision */
400 unsigned long ratio = (vm_dirty_ratio * PAGE_SIZE) / 100;
401 unsigned long bg_ratio = (dirty_background_ratio * PAGE_SIZE) / 100;
402 unsigned long thresh;
403 unsigned long bg_thresh;
404 struct task_struct *tsk;
405
406 /* gdtc is !NULL iff @dtc is for memcg domain */
407 if (gdtc) {
408 unsigned long global_avail = gdtc->avail;
409
410 /*
411 * The byte settings can't be applied directly to memcg
412 * domains. Convert them to ratios by scaling against
413 * globally available memory. As the ratios are in
414 * per-PAGE_SIZE, they can be obtained by dividing bytes by
415 * number of pages.
416 */
417 if (bytes)
418 ratio = min(DIV_ROUND_UP(bytes, global_avail),
419 PAGE_SIZE);
420 if (bg_bytes)
421 bg_ratio = min(DIV_ROUND_UP(bg_bytes, global_avail),
422 PAGE_SIZE);
423 bytes = bg_bytes = 0;
424 }
425
426 if (bytes)
427 thresh = DIV_ROUND_UP(bytes, PAGE_SIZE);
428 else
429 thresh = (ratio * available_memory) / PAGE_SIZE;
430
431 if (bg_bytes)
432 bg_thresh = DIV_ROUND_UP(bg_bytes, PAGE_SIZE);
433 else
434 bg_thresh = (bg_ratio * available_memory) / PAGE_SIZE;
435
436 if (bg_thresh >= thresh)
437 bg_thresh = thresh / 2;
438 tsk = current;
439 if (tsk->flags & PF_LESS_THROTTLE || rt_task(tsk)) {
440 bg_thresh += bg_thresh / 4 + global_wb_domain.dirty_limit / 32;
441 thresh += thresh / 4 + global_wb_domain.dirty_limit / 32;
442 }
443 dtc->thresh = thresh;
444 dtc->bg_thresh = bg_thresh;
445
446 /* we should eventually report the domain in the TP */
447 if (!gdtc)
448 trace_global_dirty_state(bg_thresh, thresh);
449}
450
451/**
452 * global_dirty_limits - background-writeback and dirty-throttling thresholds
453 * @pbackground: out parameter for bg_thresh
454 * @pdirty: out parameter for thresh
455 *
456 * Calculate bg_thresh and thresh for global_wb_domain. See
457 * domain_dirty_limits() for details.
458 */
459void global_dirty_limits(unsigned long *pbackground, unsigned long *pdirty)
460{
461 struct dirty_throttle_control gdtc = { GDTC_INIT_NO_WB };
462
463 gdtc.avail = global_dirtyable_memory();
464 domain_dirty_limits(&gdtc);
465
466 *pbackground = gdtc.bg_thresh;
467 *pdirty = gdtc.thresh;
468}
469
470/**
471 * node_dirty_limit - maximum number of dirty pages allowed in a node
472 * @pgdat: the node
473 *
474 * Return: the maximum number of dirty pages allowed in a node, based
475 * on the node's dirtyable memory.
476 */
477static unsigned long node_dirty_limit(struct pglist_data *pgdat)
478{
479 unsigned long node_memory = node_dirtyable_memory(pgdat);
480 struct task_struct *tsk = current;
481 unsigned long dirty;
482
483 if (vm_dirty_bytes)
484 dirty = DIV_ROUND_UP(vm_dirty_bytes, PAGE_SIZE) *
485 node_memory / global_dirtyable_memory();
486 else
487 dirty = vm_dirty_ratio * node_memory / 100;
488
489 if (tsk->flags & PF_LESS_THROTTLE || rt_task(tsk))
490 dirty += dirty / 4;
491
492 return dirty;
493}
494
495/**
496 * node_dirty_ok - tells whether a node is within its dirty limits
497 * @pgdat: the node to check
498 *
499 * Return: %true when the dirty pages in @pgdat are within the node's
500 * dirty limit, %false if the limit is exceeded.
501 */
502bool node_dirty_ok(struct pglist_data *pgdat)
503{
504 unsigned long limit = node_dirty_limit(pgdat);
505 unsigned long nr_pages = 0;
506
507 nr_pages += node_page_state(pgdat, NR_FILE_DIRTY);
508 nr_pages += node_page_state(pgdat, NR_UNSTABLE_NFS);
509 nr_pages += node_page_state(pgdat, NR_WRITEBACK);
510
511 return nr_pages <= limit;
512}
513
514int dirty_background_ratio_handler(struct ctl_table *table, int write,
515 void __user *buffer, size_t *lenp,
516 loff_t *ppos)
517{
518 int ret;
519
520 ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
521 if (ret == 0 && write)
522 dirty_background_bytes = 0;
523 return ret;
524}
525
526int dirty_background_bytes_handler(struct ctl_table *table, int write,
527 void __user *buffer, size_t *lenp,
528 loff_t *ppos)
529{
530 int ret;
531
532 ret = proc_doulongvec_minmax(table, write, buffer, lenp, ppos);
533 if (ret == 0 && write)
534 dirty_background_ratio = 0;
535 return ret;
536}
537
538int dirty_ratio_handler(struct ctl_table *table, int write,
539 void __user *buffer, size_t *lenp,
540 loff_t *ppos)
541{
542 int old_ratio = vm_dirty_ratio;
543 int ret;
544
545 ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
546 if (ret == 0 && write && vm_dirty_ratio != old_ratio) {
547 writeback_set_ratelimit();
548 vm_dirty_bytes = 0;
549 }
550 return ret;
551}
552
553int dirty_bytes_handler(struct ctl_table *table, int write,
554 void __user *buffer, size_t *lenp,
555 loff_t *ppos)
556{
557 unsigned long old_bytes = vm_dirty_bytes;
558 int ret;
559
560 ret = proc_doulongvec_minmax(table, write, buffer, lenp, ppos);
561 if (ret == 0 && write && vm_dirty_bytes != old_bytes) {
562 writeback_set_ratelimit();
563 vm_dirty_ratio = 0;
564 }
565 return ret;
566}
567
568static unsigned long wp_next_time(unsigned long cur_time)
569{
570 cur_time += VM_COMPLETIONS_PERIOD_LEN;
571 /* 0 has a special meaning... */
572 if (!cur_time)
573 return 1;
574 return cur_time;
575}
576
577static void wb_domain_writeout_inc(struct wb_domain *dom,
578 struct fprop_local_percpu *completions,
579 unsigned int max_prop_frac)
580{
581 __fprop_inc_percpu_max(&dom->completions, completions,
582 max_prop_frac);
583 /* First event after period switching was turned off? */
584 if (unlikely(!dom->period_time)) {
585 /*
586 * We can race with other __bdi_writeout_inc calls here but
587 * it does not cause any harm since the resulting time when
588 * timer will fire and what is in writeout_period_time will be
589 * roughly the same.
590 */
591 dom->period_time = wp_next_time(jiffies);
592 mod_timer(&dom->period_timer, dom->period_time);
593 }
594}
595
596/*
597 * Increment @wb's writeout completion count and the global writeout
598 * completion count. Called from test_clear_page_writeback().
599 */
600static inline void __wb_writeout_inc(struct bdi_writeback *wb)
601{
602 struct wb_domain *cgdom;
603
604 inc_wb_stat(wb, WB_WRITTEN);
605 wb_domain_writeout_inc(&global_wb_domain, &wb->completions,
606 wb->bdi->max_prop_frac);
607
608 cgdom = mem_cgroup_wb_domain(wb);
609 if (cgdom)
610 wb_domain_writeout_inc(cgdom, wb_memcg_completions(wb),
611 wb->bdi->max_prop_frac);
612}
613
614void wb_writeout_inc(struct bdi_writeback *wb)
615{
616 unsigned long flags;
617
618 local_irq_save(flags);
619 __wb_writeout_inc(wb);
620 local_irq_restore(flags);
621}
622EXPORT_SYMBOL_GPL(wb_writeout_inc);
623
624/*
625 * On idle system, we can be called long after we scheduled because we use
626 * deferred timers so count with missed periods.
627 */
628static void writeout_period(struct timer_list *t)
629{
630 struct wb_domain *dom = from_timer(dom, t, period_timer);
631 int miss_periods = (jiffies - dom->period_time) /
632 VM_COMPLETIONS_PERIOD_LEN;
633
634 if (fprop_new_period(&dom->completions, miss_periods + 1)) {
635 dom->period_time = wp_next_time(dom->period_time +
636 miss_periods * VM_COMPLETIONS_PERIOD_LEN);
637 mod_timer(&dom->period_timer, dom->period_time);
638 } else {
639 /*
640 * Aging has zeroed all fractions. Stop wasting CPU on period
641 * updates.
642 */
643 dom->period_time = 0;
644 }
645}
646
647int wb_domain_init(struct wb_domain *dom, gfp_t gfp)
648{
649 memset(dom, 0, sizeof(*dom));
650
651 spin_lock_init(&dom->lock);
652
653 timer_setup(&dom->period_timer, writeout_period, TIMER_DEFERRABLE);
654
655 dom->dirty_limit_tstamp = jiffies;
656
657 return fprop_global_init(&dom->completions, gfp);
658}
659
660#ifdef CONFIG_CGROUP_WRITEBACK
661void wb_domain_exit(struct wb_domain *dom)
662{
663 del_timer_sync(&dom->period_timer);
664 fprop_global_destroy(&dom->completions);
665}
666#endif
667
668/*
669 * bdi_min_ratio keeps the sum of the minimum dirty shares of all
670 * registered backing devices, which, for obvious reasons, can not
671 * exceed 100%.
672 */
673static unsigned int bdi_min_ratio;
674
675int bdi_set_min_ratio(struct backing_dev_info *bdi, unsigned int min_ratio)
676{
677 int ret = 0;
678
679 spin_lock_bh(&bdi_lock);
680 if (min_ratio > bdi->max_ratio) {
681 ret = -EINVAL;
682 } else {
683 min_ratio -= bdi->min_ratio;
684 if (bdi_min_ratio + min_ratio < 100) {
685 bdi_min_ratio += min_ratio;
686 bdi->min_ratio += min_ratio;
687 } else {
688 ret = -EINVAL;
689 }
690 }
691 spin_unlock_bh(&bdi_lock);
692
693 return ret;
694}
695
696int bdi_set_max_ratio(struct backing_dev_info *bdi, unsigned max_ratio)
697{
698 int ret = 0;
699
700 if (max_ratio > 100)
701 return -EINVAL;
702
703 spin_lock_bh(&bdi_lock);
704 if (bdi->min_ratio > max_ratio) {
705 ret = -EINVAL;
706 } else {
707 bdi->max_ratio = max_ratio;
708 bdi->max_prop_frac = (FPROP_FRAC_BASE * max_ratio) / 100;
709 }
710 spin_unlock_bh(&bdi_lock);
711
712 return ret;
713}
714EXPORT_SYMBOL(bdi_set_max_ratio);
715
716static unsigned long dirty_freerun_ceiling(unsigned long thresh,
717 unsigned long bg_thresh)
718{
719 return (thresh + bg_thresh) / 2;
720}
721
722static unsigned long hard_dirty_limit(struct wb_domain *dom,
723 unsigned long thresh)
724{
725 return max(thresh, dom->dirty_limit);
726}
727
728/*
729 * Memory which can be further allocated to a memcg domain is capped by
730 * system-wide clean memory excluding the amount being used in the domain.
731 */
732static void mdtc_calc_avail(struct dirty_throttle_control *mdtc,
733 unsigned long filepages, unsigned long headroom)
734{
735 struct dirty_throttle_control *gdtc = mdtc_gdtc(mdtc);
736 unsigned long clean = filepages - min(filepages, mdtc->dirty);
737 unsigned long global_clean = gdtc->avail - min(gdtc->avail, gdtc->dirty);
738 unsigned long other_clean = global_clean - min(global_clean, clean);
739
740 mdtc->avail = filepages + min(headroom, other_clean);
741}
742
743/**
744 * __wb_calc_thresh - @wb's share of dirty throttling threshold
745 * @dtc: dirty_throttle_context of interest
746 *
747 * Note that balance_dirty_pages() will only seriously take it as a hard limit
748 * when sleeping max_pause per page is not enough to keep the dirty pages under
749 * control. For example, when the device is completely stalled due to some error
750 * conditions, or when there are 1000 dd tasks writing to a slow 10MB/s USB key.
751 * In the other normal situations, it acts more gently by throttling the tasks
752 * more (rather than completely block them) when the wb dirty pages go high.
753 *
754 * It allocates high/low dirty limits to fast/slow devices, in order to prevent
755 * - starving fast devices
756 * - piling up dirty pages (that will take long time to sync) on slow devices
757 *
758 * The wb's share of dirty limit will be adapting to its throughput and
759 * bounded by the bdi->min_ratio and/or bdi->max_ratio parameters, if set.
760 *
761 * Return: @wb's dirty limit in pages. The term "dirty" in the context of
762 * dirty balancing includes all PG_dirty, PG_writeback and NFS unstable pages.
763 */
764static unsigned long __wb_calc_thresh(struct dirty_throttle_control *dtc)
765{
766 struct wb_domain *dom = dtc_dom(dtc);
767 unsigned long thresh = dtc->thresh;
768 u64 wb_thresh;
769 long numerator, denominator;
770 unsigned long wb_min_ratio, wb_max_ratio;
771
772 /*
773 * Calculate this BDI's share of the thresh ratio.
774 */
775 fprop_fraction_percpu(&dom->completions, dtc->wb_completions,
776 &numerator, &denominator);
777
778 wb_thresh = (thresh * (100 - bdi_min_ratio)) / 100;
779 wb_thresh *= numerator;
780 do_div(wb_thresh, denominator);
781
782 wb_min_max_ratio(dtc->wb, &wb_min_ratio, &wb_max_ratio);
783
784 wb_thresh += (thresh * wb_min_ratio) / 100;
785 if (wb_thresh > (thresh * wb_max_ratio) / 100)
786 wb_thresh = thresh * wb_max_ratio / 100;
787
788 return wb_thresh;
789}
790
791unsigned long wb_calc_thresh(struct bdi_writeback *wb, unsigned long thresh)
792{
793 struct dirty_throttle_control gdtc = { GDTC_INIT(wb),
794 .thresh = thresh };
795 return __wb_calc_thresh(&gdtc);
796}
797
798/*
799 * setpoint - dirty 3
800 * f(dirty) := 1.0 + (----------------)
801 * limit - setpoint
802 *
803 * it's a 3rd order polynomial that subjects to
804 *
805 * (1) f(freerun) = 2.0 => rampup dirty_ratelimit reasonably fast
806 * (2) f(setpoint) = 1.0 => the balance point
807 * (3) f(limit) = 0 => the hard limit
808 * (4) df/dx <= 0 => negative feedback control
809 * (5) the closer to setpoint, the smaller |df/dx| (and the reverse)
810 * => fast response on large errors; small oscillation near setpoint
811 */
812static long long pos_ratio_polynom(unsigned long setpoint,
813 unsigned long dirty,
814 unsigned long limit)
815{
816 long long pos_ratio;
817 long x;
818
819 x = div64_s64(((s64)setpoint - (s64)dirty) << RATELIMIT_CALC_SHIFT,
820 (limit - setpoint) | 1);
821 pos_ratio = x;
822 pos_ratio = pos_ratio * x >> RATELIMIT_CALC_SHIFT;
823 pos_ratio = pos_ratio * x >> RATELIMIT_CALC_SHIFT;
824 pos_ratio += 1 << RATELIMIT_CALC_SHIFT;
825
826 return clamp(pos_ratio, 0LL, 2LL << RATELIMIT_CALC_SHIFT);
827}
828
829/*
830 * Dirty position control.
831 *
832 * (o) global/bdi setpoints
833 *
834 * We want the dirty pages be balanced around the global/wb setpoints.
835 * When the number of dirty pages is higher/lower than the setpoint, the
836 * dirty position control ratio (and hence task dirty ratelimit) will be
837 * decreased/increased to bring the dirty pages back to the setpoint.
838 *
839 * pos_ratio = 1 << RATELIMIT_CALC_SHIFT
840 *
841 * if (dirty < setpoint) scale up pos_ratio
842 * if (dirty > setpoint) scale down pos_ratio
843 *
844 * if (wb_dirty < wb_setpoint) scale up pos_ratio
845 * if (wb_dirty > wb_setpoint) scale down pos_ratio
846 *
847 * task_ratelimit = dirty_ratelimit * pos_ratio >> RATELIMIT_CALC_SHIFT
848 *
849 * (o) global control line
850 *
851 * ^ pos_ratio
852 * |
853 * | |<===== global dirty control scope ======>|
854 * 2.0 .............*
855 * | .*
856 * | . *
857 * | . *
858 * | . *
859 * | . *
860 * | . *
861 * 1.0 ................................*
862 * | . . *
863 * | . . *
864 * | . . *
865 * | . . *
866 * | . . *
867 * 0 +------------.------------------.----------------------*------------->
868 * freerun^ setpoint^ limit^ dirty pages
869 *
870 * (o) wb control line
871 *
872 * ^ pos_ratio
873 * |
874 * | *
875 * | *
876 * | *
877 * | *
878 * | * |<=========== span ============>|
879 * 1.0 .......................*
880 * | . *
881 * | . *
882 * | . *
883 * | . *
884 * | . *
885 * | . *
886 * | . *
887 * | . *
888 * | . *
889 * | . *
890 * | . *
891 * 1/4 ...............................................* * * * * * * * * * * *
892 * | . .
893 * | . .
894 * | . .
895 * 0 +----------------------.-------------------------------.------------->
896 * wb_setpoint^ x_intercept^
897 *
898 * The wb control line won't drop below pos_ratio=1/4, so that wb_dirty can
899 * be smoothly throttled down to normal if it starts high in situations like
900 * - start writing to a slow SD card and a fast disk at the same time. The SD
901 * card's wb_dirty may rush to many times higher than wb_setpoint.
902 * - the wb dirty thresh drops quickly due to change of JBOD workload
903 */
904static void wb_position_ratio(struct dirty_throttle_control *dtc)
905{
906 struct bdi_writeback *wb = dtc->wb;
907 unsigned long write_bw = wb->avg_write_bandwidth;
908 unsigned long freerun = dirty_freerun_ceiling(dtc->thresh, dtc->bg_thresh);
909 unsigned long limit = hard_dirty_limit(dtc_dom(dtc), dtc->thresh);
910 unsigned long wb_thresh = dtc->wb_thresh;
911 unsigned long x_intercept;
912 unsigned long setpoint; /* dirty pages' target balance point */
913 unsigned long wb_setpoint;
914 unsigned long span;
915 long long pos_ratio; /* for scaling up/down the rate limit */
916 long x;
917
918 dtc->pos_ratio = 0;
919
920 if (unlikely(dtc->dirty >= limit))
921 return;
922
923 /*
924 * global setpoint
925 *
926 * See comment for pos_ratio_polynom().
927 */
928 setpoint = (freerun + limit) / 2;
929 pos_ratio = pos_ratio_polynom(setpoint, dtc->dirty, limit);
930
931 /*
932 * The strictlimit feature is a tool preventing mistrusted filesystems
933 * from growing a large number of dirty pages before throttling. For
934 * such filesystems balance_dirty_pages always checks wb counters
935 * against wb limits. Even if global "nr_dirty" is under "freerun".
936 * This is especially important for fuse which sets bdi->max_ratio to
937 * 1% by default. Without strictlimit feature, fuse writeback may
938 * consume arbitrary amount of RAM because it is accounted in
939 * NR_WRITEBACK_TEMP which is not involved in calculating "nr_dirty".
940 *
941 * Here, in wb_position_ratio(), we calculate pos_ratio based on
942 * two values: wb_dirty and wb_thresh. Let's consider an example:
943 * total amount of RAM is 16GB, bdi->max_ratio is equal to 1%, global
944 * limits are set by default to 10% and 20% (background and throttle).
945 * Then wb_thresh is 1% of 20% of 16GB. This amounts to ~8K pages.
946 * wb_calc_thresh(wb, bg_thresh) is about ~4K pages. wb_setpoint is
947 * about ~6K pages (as the average of background and throttle wb
948 * limits). The 3rd order polynomial will provide positive feedback if
949 * wb_dirty is under wb_setpoint and vice versa.
950 *
951 * Note, that we cannot use global counters in these calculations
952 * because we want to throttle process writing to a strictlimit wb
953 * much earlier than global "freerun" is reached (~23MB vs. ~2.3GB
954 * in the example above).
955 */
956 if (unlikely(wb->bdi->capabilities & BDI_CAP_STRICTLIMIT)) {
957 long long wb_pos_ratio;
958
959 if (dtc->wb_dirty < 8) {
960 dtc->pos_ratio = min_t(long long, pos_ratio * 2,
961 2 << RATELIMIT_CALC_SHIFT);
962 return;
963 }
964
965 if (dtc->wb_dirty >= wb_thresh)
966 return;
967
968 wb_setpoint = dirty_freerun_ceiling(wb_thresh,
969 dtc->wb_bg_thresh);
970
971 if (wb_setpoint == 0 || wb_setpoint == wb_thresh)
972 return;
973
974 wb_pos_ratio = pos_ratio_polynom(wb_setpoint, dtc->wb_dirty,
975 wb_thresh);
976
977 /*
978 * Typically, for strictlimit case, wb_setpoint << setpoint
979 * and pos_ratio >> wb_pos_ratio. In the other words global
980 * state ("dirty") is not limiting factor and we have to
981 * make decision based on wb counters. But there is an
982 * important case when global pos_ratio should get precedence:
983 * global limits are exceeded (e.g. due to activities on other
984 * wb's) while given strictlimit wb is below limit.
985 *
986 * "pos_ratio * wb_pos_ratio" would work for the case above,
987 * but it would look too non-natural for the case of all
988 * activity in the system coming from a single strictlimit wb
989 * with bdi->max_ratio == 100%.
990 *
991 * Note that min() below somewhat changes the dynamics of the
992 * control system. Normally, pos_ratio value can be well over 3
993 * (when globally we are at freerun and wb is well below wb
994 * setpoint). Now the maximum pos_ratio in the same situation
995 * is 2. We might want to tweak this if we observe the control
996 * system is too slow to adapt.
997 */
998 dtc->pos_ratio = min(pos_ratio, wb_pos_ratio);
999 return;
1000 }
1001
1002 /*
1003 * We have computed basic pos_ratio above based on global situation. If
1004 * the wb is over/under its share of dirty pages, we want to scale
1005 * pos_ratio further down/up. That is done by the following mechanism.
1006 */
1007
1008 /*
1009 * wb setpoint
1010 *
1011 * f(wb_dirty) := 1.0 + k * (wb_dirty - wb_setpoint)
1012 *
1013 * x_intercept - wb_dirty
1014 * := --------------------------
1015 * x_intercept - wb_setpoint
1016 *
1017 * The main wb control line is a linear function that subjects to
1018 *
1019 * (1) f(wb_setpoint) = 1.0
1020 * (2) k = - 1 / (8 * write_bw) (in single wb case)
1021 * or equally: x_intercept = wb_setpoint + 8 * write_bw
1022 *
1023 * For single wb case, the dirty pages are observed to fluctuate
1024 * regularly within range
1025 * [wb_setpoint - write_bw/2, wb_setpoint + write_bw/2]
1026 * for various filesystems, where (2) can yield in a reasonable 12.5%
1027 * fluctuation range for pos_ratio.
1028 *
1029 * For JBOD case, wb_thresh (not wb_dirty!) could fluctuate up to its
1030 * own size, so move the slope over accordingly and choose a slope that
1031 * yields 100% pos_ratio fluctuation on suddenly doubled wb_thresh.
1032 */
1033 if (unlikely(wb_thresh > dtc->thresh))
1034 wb_thresh = dtc->thresh;
1035 /*
1036 * It's very possible that wb_thresh is close to 0 not because the
1037 * device is slow, but that it has remained inactive for long time.
1038 * Honour such devices a reasonable good (hopefully IO efficient)
1039 * threshold, so that the occasional writes won't be blocked and active
1040 * writes can rampup the threshold quickly.
1041 */
1042 wb_thresh = max(wb_thresh, (limit - dtc->dirty) / 8);
1043 /*
1044 * scale global setpoint to wb's:
1045 * wb_setpoint = setpoint * wb_thresh / thresh
1046 */
1047 x = div_u64((u64)wb_thresh << 16, dtc->thresh | 1);
1048 wb_setpoint = setpoint * (u64)x >> 16;
1049 /*
1050 * Use span=(8*write_bw) in single wb case as indicated by
1051 * (thresh - wb_thresh ~= 0) and transit to wb_thresh in JBOD case.
1052 *
1053 * wb_thresh thresh - wb_thresh
1054 * span = --------- * (8 * write_bw) + ------------------ * wb_thresh
1055 * thresh thresh
1056 */
1057 span = (dtc->thresh - wb_thresh + 8 * write_bw) * (u64)x >> 16;
1058 x_intercept = wb_setpoint + span;
1059
1060 if (dtc->wb_dirty < x_intercept - span / 4) {
1061 pos_ratio = div64_u64(pos_ratio * (x_intercept - dtc->wb_dirty),
1062 (x_intercept - wb_setpoint) | 1);
1063 } else
1064 pos_ratio /= 4;
1065
1066 /*
1067 * wb reserve area, safeguard against dirty pool underrun and disk idle
1068 * It may push the desired control point of global dirty pages higher
1069 * than setpoint.
1070 */
1071 x_intercept = wb_thresh / 2;
1072 if (dtc->wb_dirty < x_intercept) {
1073 if (dtc->wb_dirty > x_intercept / 8)
1074 pos_ratio = div_u64(pos_ratio * x_intercept,
1075 dtc->wb_dirty);
1076 else
1077 pos_ratio *= 8;
1078 }
1079
1080 dtc->pos_ratio = pos_ratio;
1081}
1082
1083static void wb_update_write_bandwidth(struct bdi_writeback *wb,
1084 unsigned long elapsed,
1085 unsigned long written)
1086{
1087 const unsigned long period = roundup_pow_of_two(3 * HZ);
1088 unsigned long avg = wb->avg_write_bandwidth;
1089 unsigned long old = wb->write_bandwidth;
1090 u64 bw;
1091
1092 /*
1093 * bw = written * HZ / elapsed
1094 *
1095 * bw * elapsed + write_bandwidth * (period - elapsed)
1096 * write_bandwidth = ---------------------------------------------------
1097 * period
1098 *
1099 * @written may have decreased due to account_page_redirty().
1100 * Avoid underflowing @bw calculation.
1101 */
1102 bw = written - min(written, wb->written_stamp);
1103 bw *= HZ;
1104 if (unlikely(elapsed > period)) {
1105 do_div(bw, elapsed);
1106 avg = bw;
1107 goto out;
1108 }
1109 bw += (u64)wb->write_bandwidth * (period - elapsed);
1110 bw >>= ilog2(period);
1111
1112 /*
1113 * one more level of smoothing, for filtering out sudden spikes
1114 */
1115 if (avg > old && old >= (unsigned long)bw)
1116 avg -= (avg - old) >> 3;
1117
1118 if (avg < old && old <= (unsigned long)bw)
1119 avg += (old - avg) >> 3;
1120
1121out:
1122 /* keep avg > 0 to guarantee that tot > 0 if there are dirty wbs */
1123 avg = max(avg, 1LU);
1124 if (wb_has_dirty_io(wb)) {
1125 long delta = avg - wb->avg_write_bandwidth;
1126 WARN_ON_ONCE(atomic_long_add_return(delta,
1127 &wb->bdi->tot_write_bandwidth) <= 0);
1128 }
1129 wb->write_bandwidth = bw;
1130 wb->avg_write_bandwidth = avg;
1131}
1132
1133static void update_dirty_limit(struct dirty_throttle_control *dtc)
1134{
1135 struct wb_domain *dom = dtc_dom(dtc);
1136 unsigned long thresh = dtc->thresh;
1137 unsigned long limit = dom->dirty_limit;
1138
1139 /*
1140 * Follow up in one step.
1141 */
1142 if (limit < thresh) {
1143 limit = thresh;
1144 goto update;
1145 }
1146
1147 /*
1148 * Follow down slowly. Use the higher one as the target, because thresh
1149 * may drop below dirty. This is exactly the reason to introduce
1150 * dom->dirty_limit which is guaranteed to lie above the dirty pages.
1151 */
1152 thresh = max(thresh, dtc->dirty);
1153 if (limit > thresh) {
1154 limit -= (limit - thresh) >> 5;
1155 goto update;
1156 }
1157 return;
1158update:
1159 dom->dirty_limit = limit;
1160}
1161
1162static void domain_update_bandwidth(struct dirty_throttle_control *dtc,
1163 unsigned long now)
1164{
1165 struct wb_domain *dom = dtc_dom(dtc);
1166
1167 /*
1168 * check locklessly first to optimize away locking for the most time
1169 */
1170 if (time_before(now, dom->dirty_limit_tstamp + BANDWIDTH_INTERVAL))
1171 return;
1172
1173 spin_lock(&dom->lock);
1174 if (time_after_eq(now, dom->dirty_limit_tstamp + BANDWIDTH_INTERVAL)) {
1175 update_dirty_limit(dtc);
1176 dom->dirty_limit_tstamp = now;
1177 }
1178 spin_unlock(&dom->lock);
1179}
1180
1181/*
1182 * Maintain wb->dirty_ratelimit, the base dirty throttle rate.
1183 *
1184 * Normal wb tasks will be curbed at or below it in long term.
1185 * Obviously it should be around (write_bw / N) when there are N dd tasks.
1186 */
1187static void wb_update_dirty_ratelimit(struct dirty_throttle_control *dtc,
1188 unsigned long dirtied,
1189 unsigned long elapsed)
1190{
1191 struct bdi_writeback *wb = dtc->wb;
1192 unsigned long dirty = dtc->dirty;
1193 unsigned long freerun = dirty_freerun_ceiling(dtc->thresh, dtc->bg_thresh);
1194 unsigned long limit = hard_dirty_limit(dtc_dom(dtc), dtc->thresh);
1195 unsigned long setpoint = (freerun + limit) / 2;
1196 unsigned long write_bw = wb->avg_write_bandwidth;
1197 unsigned long dirty_ratelimit = wb->dirty_ratelimit;
1198 unsigned long dirty_rate;
1199 unsigned long task_ratelimit;
1200 unsigned long balanced_dirty_ratelimit;
1201 unsigned long step;
1202 unsigned long x;
1203 unsigned long shift;
1204
1205 /*
1206 * The dirty rate will match the writeout rate in long term, except
1207 * when dirty pages are truncated by userspace or re-dirtied by FS.
1208 */
1209 dirty_rate = (dirtied - wb->dirtied_stamp) * HZ / elapsed;
1210
1211 /*
1212 * task_ratelimit reflects each dd's dirty rate for the past 200ms.
1213 */
1214 task_ratelimit = (u64)dirty_ratelimit *
1215 dtc->pos_ratio >> RATELIMIT_CALC_SHIFT;
1216 task_ratelimit++; /* it helps rampup dirty_ratelimit from tiny values */
1217
1218 /*
1219 * A linear estimation of the "balanced" throttle rate. The theory is,
1220 * if there are N dd tasks, each throttled at task_ratelimit, the wb's
1221 * dirty_rate will be measured to be (N * task_ratelimit). So the below
1222 * formula will yield the balanced rate limit (write_bw / N).
1223 *
1224 * Note that the expanded form is not a pure rate feedback:
1225 * rate_(i+1) = rate_(i) * (write_bw / dirty_rate) (1)
1226 * but also takes pos_ratio into account:
1227 * rate_(i+1) = rate_(i) * (write_bw / dirty_rate) * pos_ratio (2)
1228 *
1229 * (1) is not realistic because pos_ratio also takes part in balancing
1230 * the dirty rate. Consider the state
1231 * pos_ratio = 0.5 (3)
1232 * rate = 2 * (write_bw / N) (4)
1233 * If (1) is used, it will stuck in that state! Because each dd will
1234 * be throttled at
1235 * task_ratelimit = pos_ratio * rate = (write_bw / N) (5)
1236 * yielding
1237 * dirty_rate = N * task_ratelimit = write_bw (6)
1238 * put (6) into (1) we get
1239 * rate_(i+1) = rate_(i) (7)
1240 *
1241 * So we end up using (2) to always keep
1242 * rate_(i+1) ~= (write_bw / N) (8)
1243 * regardless of the value of pos_ratio. As long as (8) is satisfied,
1244 * pos_ratio is able to drive itself to 1.0, which is not only where
1245 * the dirty count meet the setpoint, but also where the slope of
1246 * pos_ratio is most flat and hence task_ratelimit is least fluctuated.
1247 */
1248 balanced_dirty_ratelimit = div_u64((u64)task_ratelimit * write_bw,
1249 dirty_rate | 1);
1250 /*
1251 * balanced_dirty_ratelimit ~= (write_bw / N) <= write_bw
1252 */
1253 if (unlikely(balanced_dirty_ratelimit > write_bw))
1254 balanced_dirty_ratelimit = write_bw;
1255
1256 /*
1257 * We could safely do this and return immediately:
1258 *
1259 * wb->dirty_ratelimit = balanced_dirty_ratelimit;
1260 *
1261 * However to get a more stable dirty_ratelimit, the below elaborated
1262 * code makes use of task_ratelimit to filter out singular points and
1263 * limit the step size.
1264 *
1265 * The below code essentially only uses the relative value of
1266 *
1267 * task_ratelimit - dirty_ratelimit
1268 * = (pos_ratio - 1) * dirty_ratelimit
1269 *
1270 * which reflects the direction and size of dirty position error.
1271 */
1272
1273 /*
1274 * dirty_ratelimit will follow balanced_dirty_ratelimit iff
1275 * task_ratelimit is on the same side of dirty_ratelimit, too.
1276 * For example, when
1277 * - dirty_ratelimit > balanced_dirty_ratelimit
1278 * - dirty_ratelimit > task_ratelimit (dirty pages are above setpoint)
1279 * lowering dirty_ratelimit will help meet both the position and rate
1280 * control targets. Otherwise, don't update dirty_ratelimit if it will
1281 * only help meet the rate target. After all, what the users ultimately
1282 * feel and care are stable dirty rate and small position error.
1283 *
1284 * |task_ratelimit - dirty_ratelimit| is used to limit the step size
1285 * and filter out the singular points of balanced_dirty_ratelimit. Which
1286 * keeps jumping around randomly and can even leap far away at times
1287 * due to the small 200ms estimation period of dirty_rate (we want to
1288 * keep that period small to reduce time lags).
1289 */
1290 step = 0;
1291
1292 /*
1293 * For strictlimit case, calculations above were based on wb counters
1294 * and limits (starting from pos_ratio = wb_position_ratio() and up to
1295 * balanced_dirty_ratelimit = task_ratelimit * write_bw / dirty_rate).
1296 * Hence, to calculate "step" properly, we have to use wb_dirty as
1297 * "dirty" and wb_setpoint as "setpoint".
1298 *
1299 * We rampup dirty_ratelimit forcibly if wb_dirty is low because
1300 * it's possible that wb_thresh is close to zero due to inactivity
1301 * of backing device.
1302 */
1303 if (unlikely(wb->bdi->capabilities & BDI_CAP_STRICTLIMIT)) {
1304 dirty = dtc->wb_dirty;
1305 if (dtc->wb_dirty < 8)
1306 setpoint = dtc->wb_dirty + 1;
1307 else
1308 setpoint = (dtc->wb_thresh + dtc->wb_bg_thresh) / 2;
1309 }
1310
1311 if (dirty < setpoint) {
1312 x = min3(wb->balanced_dirty_ratelimit,
1313 balanced_dirty_ratelimit, task_ratelimit);
1314 if (dirty_ratelimit < x)
1315 step = x - dirty_ratelimit;
1316 } else {
1317 x = max3(wb->balanced_dirty_ratelimit,
1318 balanced_dirty_ratelimit, task_ratelimit);
1319 if (dirty_ratelimit > x)
1320 step = dirty_ratelimit - x;
1321 }
1322
1323 /*
1324 * Don't pursue 100% rate matching. It's impossible since the balanced
1325 * rate itself is constantly fluctuating. So decrease the track speed
1326 * when it gets close to the target. Helps eliminate pointless tremors.
1327 */
1328 shift = dirty_ratelimit / (2 * step + 1);
1329 if (shift < BITS_PER_LONG)
1330 step = DIV_ROUND_UP(step >> shift, 8);
1331 else
1332 step = 0;
1333
1334 if (dirty_ratelimit < balanced_dirty_ratelimit)
1335 dirty_ratelimit += step;
1336 else
1337 dirty_ratelimit -= step;
1338
1339 wb->dirty_ratelimit = max(dirty_ratelimit, 1UL);
1340 wb->balanced_dirty_ratelimit = balanced_dirty_ratelimit;
1341
1342 trace_bdi_dirty_ratelimit(wb, dirty_rate, task_ratelimit);
1343}
1344
1345static void __wb_update_bandwidth(struct dirty_throttle_control *gdtc,
1346 struct dirty_throttle_control *mdtc,
1347 unsigned long start_time,
1348 bool update_ratelimit)
1349{
1350 struct bdi_writeback *wb = gdtc->wb;
1351 unsigned long now = jiffies;
1352 unsigned long elapsed = now - wb->bw_time_stamp;
1353 unsigned long dirtied;
1354 unsigned long written;
1355
1356 lockdep_assert_held(&wb->list_lock);
1357
1358 /*
1359 * rate-limit, only update once every 200ms.
1360 */
1361 if (elapsed < BANDWIDTH_INTERVAL)
1362 return;
1363
1364 dirtied = percpu_counter_read(&wb->stat[WB_DIRTIED]);
1365 written = percpu_counter_read(&wb->stat[WB_WRITTEN]);
1366
1367 /*
1368 * Skip quiet periods when disk bandwidth is under-utilized.
1369 * (at least 1s idle time between two flusher runs)
1370 */
1371 if (elapsed > HZ && time_before(wb->bw_time_stamp, start_time))
1372 goto snapshot;
1373
1374 if (update_ratelimit) {
1375 domain_update_bandwidth(gdtc, now);
1376 wb_update_dirty_ratelimit(gdtc, dirtied, elapsed);
1377
1378 /*
1379 * @mdtc is always NULL if !CGROUP_WRITEBACK but the
1380 * compiler has no way to figure that out. Help it.
1381 */
1382 if (IS_ENABLED(CONFIG_CGROUP_WRITEBACK) && mdtc) {
1383 domain_update_bandwidth(mdtc, now);
1384 wb_update_dirty_ratelimit(mdtc, dirtied, elapsed);
1385 }
1386 }
1387 wb_update_write_bandwidth(wb, elapsed, written);
1388
1389snapshot:
1390 wb->dirtied_stamp = dirtied;
1391 wb->written_stamp = written;
1392 wb->bw_time_stamp = now;
1393}
1394
1395void wb_update_bandwidth(struct bdi_writeback *wb, unsigned long start_time)
1396{
1397 struct dirty_throttle_control gdtc = { GDTC_INIT(wb) };
1398
1399 __wb_update_bandwidth(&gdtc, NULL, start_time, false);
1400}
1401
1402/*
1403 * After a task dirtied this many pages, balance_dirty_pages_ratelimited()
1404 * will look to see if it needs to start dirty throttling.
1405 *
1406 * If dirty_poll_interval is too low, big NUMA machines will call the expensive
1407 * global_zone_page_state() too often. So scale it near-sqrt to the safety margin
1408 * (the number of pages we may dirty without exceeding the dirty limits).
1409 */
1410static unsigned long dirty_poll_interval(unsigned long dirty,
1411 unsigned long thresh)
1412{
1413 if (thresh > dirty)
1414 return 1UL << (ilog2(thresh - dirty) >> 1);
1415
1416 return 1;
1417}
1418
1419static unsigned long wb_max_pause(struct bdi_writeback *wb,
1420 unsigned long wb_dirty)
1421{
1422 unsigned long bw = wb->avg_write_bandwidth;
1423 unsigned long t;
1424
1425 /*
1426 * Limit pause time for small memory systems. If sleeping for too long
1427 * time, a small pool of dirty/writeback pages may go empty and disk go
1428 * idle.
1429 *
1430 * 8 serves as the safety ratio.
1431 */
1432 t = wb_dirty / (1 + bw / roundup_pow_of_two(1 + HZ / 8));
1433 t++;
1434
1435 return min_t(unsigned long, t, MAX_PAUSE);
1436}
1437
1438static long wb_min_pause(struct bdi_writeback *wb,
1439 long max_pause,
1440 unsigned long task_ratelimit,
1441 unsigned long dirty_ratelimit,
1442 int *nr_dirtied_pause)
1443{
1444 long hi = ilog2(wb->avg_write_bandwidth);
1445 long lo = ilog2(wb->dirty_ratelimit);
1446 long t; /* target pause */
1447 long pause; /* estimated next pause */
1448 int pages; /* target nr_dirtied_pause */
1449
1450 /* target for 10ms pause on 1-dd case */
1451 t = max(1, HZ / 100);
1452
1453 /*
1454 * Scale up pause time for concurrent dirtiers in order to reduce CPU
1455 * overheads.
1456 *
1457 * (N * 10ms) on 2^N concurrent tasks.
1458 */
1459 if (hi > lo)
1460 t += (hi - lo) * (10 * HZ) / 1024;
1461
1462 /*
1463 * This is a bit convoluted. We try to base the next nr_dirtied_pause
1464 * on the much more stable dirty_ratelimit. However the next pause time
1465 * will be computed based on task_ratelimit and the two rate limits may
1466 * depart considerably at some time. Especially if task_ratelimit goes
1467 * below dirty_ratelimit/2 and the target pause is max_pause, the next
1468 * pause time will be max_pause*2 _trimmed down_ to max_pause. As a
1469 * result task_ratelimit won't be executed faithfully, which could
1470 * eventually bring down dirty_ratelimit.
1471 *
1472 * We apply two rules to fix it up:
1473 * 1) try to estimate the next pause time and if necessary, use a lower
1474 * nr_dirtied_pause so as not to exceed max_pause. When this happens,
1475 * nr_dirtied_pause will be "dancing" with task_ratelimit.
1476 * 2) limit the target pause time to max_pause/2, so that the normal
1477 * small fluctuations of task_ratelimit won't trigger rule (1) and
1478 * nr_dirtied_pause will remain as stable as dirty_ratelimit.
1479 */
1480 t = min(t, 1 + max_pause / 2);
1481 pages = dirty_ratelimit * t / roundup_pow_of_two(HZ);
1482
1483 /*
1484 * Tiny nr_dirtied_pause is found to hurt I/O performance in the test
1485 * case fio-mmap-randwrite-64k, which does 16*{sync read, async write}.
1486 * When the 16 consecutive reads are often interrupted by some dirty
1487 * throttling pause during the async writes, cfq will go into idles
1488 * (deadline is fine). So push nr_dirtied_pause as high as possible
1489 * until reaches DIRTY_POLL_THRESH=32 pages.
1490 */
1491 if (pages < DIRTY_POLL_THRESH) {
1492 t = max_pause;
1493 pages = dirty_ratelimit * t / roundup_pow_of_two(HZ);
1494 if (pages > DIRTY_POLL_THRESH) {
1495 pages = DIRTY_POLL_THRESH;
1496 t = HZ * DIRTY_POLL_THRESH / dirty_ratelimit;
1497 }
1498 }
1499
1500 pause = HZ * pages / (task_ratelimit + 1);
1501 if (pause > max_pause) {
1502 t = max_pause;
1503 pages = task_ratelimit * t / roundup_pow_of_two(HZ);
1504 }
1505
1506 *nr_dirtied_pause = pages;
1507 /*
1508 * The minimal pause time will normally be half the target pause time.
1509 */
1510 return pages >= DIRTY_POLL_THRESH ? 1 + t / 2 : t;
1511}
1512
1513static inline void wb_dirty_limits(struct dirty_throttle_control *dtc)
1514{
1515 struct bdi_writeback *wb = dtc->wb;
1516 unsigned long wb_reclaimable;
1517
1518 /*
1519 * wb_thresh is not treated as some limiting factor as
1520 * dirty_thresh, due to reasons
1521 * - in JBOD setup, wb_thresh can fluctuate a lot
1522 * - in a system with HDD and USB key, the USB key may somehow
1523 * go into state (wb_dirty >> wb_thresh) either because
1524 * wb_dirty starts high, or because wb_thresh drops low.
1525 * In this case we don't want to hard throttle the USB key
1526 * dirtiers for 100 seconds until wb_dirty drops under
1527 * wb_thresh. Instead the auxiliary wb control line in
1528 * wb_position_ratio() will let the dirtier task progress
1529 * at some rate <= (write_bw / 2) for bringing down wb_dirty.
1530 */
1531 dtc->wb_thresh = __wb_calc_thresh(dtc);
1532 dtc->wb_bg_thresh = dtc->thresh ?
1533 div_u64((u64)dtc->wb_thresh * dtc->bg_thresh, dtc->thresh) : 0;
1534
1535 /*
1536 * In order to avoid the stacked BDI deadlock we need
1537 * to ensure we accurately count the 'dirty' pages when
1538 * the threshold is low.
1539 *
1540 * Otherwise it would be possible to get thresh+n pages
1541 * reported dirty, even though there are thresh-m pages
1542 * actually dirty; with m+n sitting in the percpu
1543 * deltas.
1544 */
1545 if (dtc->wb_thresh < 2 * wb_stat_error()) {
1546 wb_reclaimable = wb_stat_sum(wb, WB_RECLAIMABLE);
1547 dtc->wb_dirty = wb_reclaimable + wb_stat_sum(wb, WB_WRITEBACK);
1548 } else {
1549 wb_reclaimable = wb_stat(wb, WB_RECLAIMABLE);
1550 dtc->wb_dirty = wb_reclaimable + wb_stat(wb, WB_WRITEBACK);
1551 }
1552}
1553
1554/*
1555 * balance_dirty_pages() must be called by processes which are generating dirty
1556 * data. It looks at the number of dirty pages in the machine and will force
1557 * the caller to wait once crossing the (background_thresh + dirty_thresh) / 2.
1558 * If we're over `background_thresh' then the writeback threads are woken to
1559 * perform some writeout.
1560 */
1561static void balance_dirty_pages(struct bdi_writeback *wb,
1562 unsigned long pages_dirtied)
1563{
1564 struct dirty_throttle_control gdtc_stor = { GDTC_INIT(wb) };
1565 struct dirty_throttle_control mdtc_stor = { MDTC_INIT(wb, &gdtc_stor) };
1566 struct dirty_throttle_control * const gdtc = &gdtc_stor;
1567 struct dirty_throttle_control * const mdtc = mdtc_valid(&mdtc_stor) ?
1568 &mdtc_stor : NULL;
1569 struct dirty_throttle_control *sdtc;
1570 unsigned long nr_reclaimable; /* = file_dirty + unstable_nfs */
1571 long period;
1572 long pause;
1573 long max_pause;
1574 long min_pause;
1575 int nr_dirtied_pause;
1576 bool dirty_exceeded = false;
1577 unsigned long task_ratelimit;
1578 unsigned long dirty_ratelimit;
1579 struct backing_dev_info *bdi = wb->bdi;
1580 bool strictlimit = bdi->capabilities & BDI_CAP_STRICTLIMIT;
1581 unsigned long start_time = jiffies;
1582
1583 for (;;) {
1584 unsigned long now = jiffies;
1585 unsigned long dirty, thresh, bg_thresh;
1586 unsigned long m_dirty = 0; /* stop bogus uninit warnings */
1587 unsigned long m_thresh = 0;
1588 unsigned long m_bg_thresh = 0;
1589
1590 /*
1591 * Unstable writes are a feature of certain networked
1592 * filesystems (i.e. NFS) in which data may have been
1593 * written to the server's write cache, but has not yet
1594 * been flushed to permanent storage.
1595 */
1596 nr_reclaimable = global_node_page_state(NR_FILE_DIRTY) +
1597 global_node_page_state(NR_UNSTABLE_NFS);
1598 gdtc->avail = global_dirtyable_memory();
1599 gdtc->dirty = nr_reclaimable + global_node_page_state(NR_WRITEBACK);
1600
1601 domain_dirty_limits(gdtc);
1602
1603 if (unlikely(strictlimit)) {
1604 wb_dirty_limits(gdtc);
1605
1606 dirty = gdtc->wb_dirty;
1607 thresh = gdtc->wb_thresh;
1608 bg_thresh = gdtc->wb_bg_thresh;
1609 } else {
1610 dirty = gdtc->dirty;
1611 thresh = gdtc->thresh;
1612 bg_thresh = gdtc->bg_thresh;
1613 }
1614
1615 if (mdtc) {
1616 unsigned long filepages, headroom, writeback;
1617
1618 /*
1619 * If @wb belongs to !root memcg, repeat the same
1620 * basic calculations for the memcg domain.
1621 */
1622 mem_cgroup_wb_stats(wb, &filepages, &headroom,
1623 &mdtc->dirty, &writeback);
1624 mdtc->dirty += writeback;
1625 mdtc_calc_avail(mdtc, filepages, headroom);
1626
1627 domain_dirty_limits(mdtc);
1628
1629 if (unlikely(strictlimit)) {
1630 wb_dirty_limits(mdtc);
1631 m_dirty = mdtc->wb_dirty;
1632 m_thresh = mdtc->wb_thresh;
1633 m_bg_thresh = mdtc->wb_bg_thresh;
1634 } else {
1635 m_dirty = mdtc->dirty;
1636 m_thresh = mdtc->thresh;
1637 m_bg_thresh = mdtc->bg_thresh;
1638 }
1639 }
1640
1641 /*
1642 * Throttle it only when the background writeback cannot
1643 * catch-up. This avoids (excessively) small writeouts
1644 * when the wb limits are ramping up in case of !strictlimit.
1645 *
1646 * In strictlimit case make decision based on the wb counters
1647 * and limits. Small writeouts when the wb limits are ramping
1648 * up are the price we consciously pay for strictlimit-ing.
1649 *
1650 * If memcg domain is in effect, @dirty should be under
1651 * both global and memcg freerun ceilings.
1652 */
1653 if (dirty <= dirty_freerun_ceiling(thresh, bg_thresh) &&
1654 (!mdtc ||
1655 m_dirty <= dirty_freerun_ceiling(m_thresh, m_bg_thresh))) {
1656 unsigned long intv = dirty_poll_interval(dirty, thresh);
1657 unsigned long m_intv = ULONG_MAX;
1658
1659 current->dirty_paused_when = now;
1660 current->nr_dirtied = 0;
1661 if (mdtc)
1662 m_intv = dirty_poll_interval(m_dirty, m_thresh);
1663 current->nr_dirtied_pause = min(intv, m_intv);
1664 break;
1665 }
1666
1667 if (unlikely(!writeback_in_progress(wb)))
1668 wb_start_background_writeback(wb);
1669
1670 mem_cgroup_flush_foreign(wb);
1671
1672 /*
1673 * Calculate global domain's pos_ratio and select the
1674 * global dtc by default.
1675 */
1676 if (!strictlimit)
1677 wb_dirty_limits(gdtc);
1678
1679 dirty_exceeded = (gdtc->wb_dirty > gdtc->wb_thresh) &&
1680 ((gdtc->dirty > gdtc->thresh) || strictlimit);
1681
1682 wb_position_ratio(gdtc);
1683 sdtc = gdtc;
1684
1685 if (mdtc) {
1686 /*
1687 * If memcg domain is in effect, calculate its
1688 * pos_ratio. @wb should satisfy constraints from
1689 * both global and memcg domains. Choose the one
1690 * w/ lower pos_ratio.
1691 */
1692 if (!strictlimit)
1693 wb_dirty_limits(mdtc);
1694
1695 dirty_exceeded |= (mdtc->wb_dirty > mdtc->wb_thresh) &&
1696 ((mdtc->dirty > mdtc->thresh) || strictlimit);
1697
1698 wb_position_ratio(mdtc);
1699 if (mdtc->pos_ratio < gdtc->pos_ratio)
1700 sdtc = mdtc;
1701 }
1702
1703 if (dirty_exceeded && !wb->dirty_exceeded)
1704 wb->dirty_exceeded = 1;
1705
1706 if (time_is_before_jiffies(wb->bw_time_stamp +
1707 BANDWIDTH_INTERVAL)) {
1708 spin_lock(&wb->list_lock);
1709 __wb_update_bandwidth(gdtc, mdtc, start_time, true);
1710 spin_unlock(&wb->list_lock);
1711 }
1712
1713 /* throttle according to the chosen dtc */
1714 dirty_ratelimit = wb->dirty_ratelimit;
1715 task_ratelimit = ((u64)dirty_ratelimit * sdtc->pos_ratio) >>
1716 RATELIMIT_CALC_SHIFT;
1717 max_pause = wb_max_pause(wb, sdtc->wb_dirty);
1718 min_pause = wb_min_pause(wb, max_pause,
1719 task_ratelimit, dirty_ratelimit,
1720 &nr_dirtied_pause);
1721
1722 if (unlikely(task_ratelimit == 0)) {
1723 period = max_pause;
1724 pause = max_pause;
1725 goto pause;
1726 }
1727 period = HZ * pages_dirtied / task_ratelimit;
1728 pause = period;
1729 if (current->dirty_paused_when)
1730 pause -= now - current->dirty_paused_when;
1731 /*
1732 * For less than 1s think time (ext3/4 may block the dirtier
1733 * for up to 800ms from time to time on 1-HDD; so does xfs,
1734 * however at much less frequency), try to compensate it in
1735 * future periods by updating the virtual time; otherwise just
1736 * do a reset, as it may be a light dirtier.
1737 */
1738 if (pause < min_pause) {
1739 trace_balance_dirty_pages(wb,
1740 sdtc->thresh,
1741 sdtc->bg_thresh,
1742 sdtc->dirty,
1743 sdtc->wb_thresh,
1744 sdtc->wb_dirty,
1745 dirty_ratelimit,
1746 task_ratelimit,
1747 pages_dirtied,
1748 period,
1749 min(pause, 0L),
1750 start_time);
1751 if (pause < -HZ) {
1752 current->dirty_paused_when = now;
1753 current->nr_dirtied = 0;
1754 } else if (period) {
1755 current->dirty_paused_when += period;
1756 current->nr_dirtied = 0;
1757 } else if (current->nr_dirtied_pause <= pages_dirtied)
1758 current->nr_dirtied_pause += pages_dirtied;
1759 break;
1760 }
1761 if (unlikely(pause > max_pause)) {
1762 /* for occasional dropped task_ratelimit */
1763 now += min(pause - max_pause, max_pause);
1764 pause = max_pause;
1765 }
1766
1767pause:
1768 trace_balance_dirty_pages(wb,
1769 sdtc->thresh,
1770 sdtc->bg_thresh,
1771 sdtc->dirty,
1772 sdtc->wb_thresh,
1773 sdtc->wb_dirty,
1774 dirty_ratelimit,
1775 task_ratelimit,
1776 pages_dirtied,
1777 period,
1778 pause,
1779 start_time);
1780 __set_current_state(TASK_KILLABLE);
1781 wb->dirty_sleep = now;
1782 io_schedule_timeout(pause);
1783
1784 current->dirty_paused_when = now + pause;
1785 current->nr_dirtied = 0;
1786 current->nr_dirtied_pause = nr_dirtied_pause;
1787
1788 /*
1789 * This is typically equal to (dirty < thresh) and can also
1790 * keep "1000+ dd on a slow USB stick" under control.
1791 */
1792 if (task_ratelimit)
1793 break;
1794
1795 /*
1796 * In the case of an unresponding NFS server and the NFS dirty
1797 * pages exceeds dirty_thresh, give the other good wb's a pipe
1798 * to go through, so that tasks on them still remain responsive.
1799 *
1800 * In theory 1 page is enough to keep the consumer-producer
1801 * pipe going: the flusher cleans 1 page => the task dirties 1
1802 * more page. However wb_dirty has accounting errors. So use
1803 * the larger and more IO friendly wb_stat_error.
1804 */
1805 if (sdtc->wb_dirty <= wb_stat_error())
1806 break;
1807
1808 if (fatal_signal_pending(current))
1809 break;
1810 }
1811
1812 if (!dirty_exceeded && wb->dirty_exceeded)
1813 wb->dirty_exceeded = 0;
1814
1815 if (writeback_in_progress(wb))
1816 return;
1817
1818 /*
1819 * In laptop mode, we wait until hitting the higher threshold before
1820 * starting background writeout, and then write out all the way down
1821 * to the lower threshold. So slow writers cause minimal disk activity.
1822 *
1823 * In normal mode, we start background writeout at the lower
1824 * background_thresh, to keep the amount of dirty memory low.
1825 */
1826 if (laptop_mode)
1827 return;
1828
1829 if (nr_reclaimable > gdtc->bg_thresh)
1830 wb_start_background_writeback(wb);
1831}
1832
1833static DEFINE_PER_CPU(int, bdp_ratelimits);
1834
1835/*
1836 * Normal tasks are throttled by
1837 * loop {
1838 * dirty tsk->nr_dirtied_pause pages;
1839 * take a snap in balance_dirty_pages();
1840 * }
1841 * However there is a worst case. If every task exit immediately when dirtied
1842 * (tsk->nr_dirtied_pause - 1) pages, balance_dirty_pages() will never be
1843 * called to throttle the page dirties. The solution is to save the not yet
1844 * throttled page dirties in dirty_throttle_leaks on task exit and charge them
1845 * randomly into the running tasks. This works well for the above worst case,
1846 * as the new task will pick up and accumulate the old task's leaked dirty
1847 * count and eventually get throttled.
1848 */
1849DEFINE_PER_CPU(int, dirty_throttle_leaks) = 0;
1850
1851/**
1852 * balance_dirty_pages_ratelimited - balance dirty memory state
1853 * @mapping: address_space which was dirtied
1854 *
1855 * Processes which are dirtying memory should call in here once for each page
1856 * which was newly dirtied. The function will periodically check the system's
1857 * dirty state and will initiate writeback if needed.
1858 *
1859 * On really big machines, get_writeback_state is expensive, so try to avoid
1860 * calling it too often (ratelimiting). But once we're over the dirty memory
1861 * limit we decrease the ratelimiting by a lot, to prevent individual processes
1862 * from overshooting the limit by (ratelimit_pages) each.
1863 */
1864void balance_dirty_pages_ratelimited(struct address_space *mapping)
1865{
1866 struct inode *inode = mapping->host;
1867 struct backing_dev_info *bdi = inode_to_bdi(inode);
1868 struct bdi_writeback *wb = NULL;
1869 int ratelimit;
1870 int *p;
1871
1872 if (!bdi_cap_account_dirty(bdi))
1873 return;
1874
1875 if (inode_cgwb_enabled(inode))
1876 wb = wb_get_create_current(bdi, GFP_KERNEL);
1877 if (!wb)
1878 wb = &bdi->wb;
1879
1880 ratelimit = current->nr_dirtied_pause;
1881 if (wb->dirty_exceeded)
1882 ratelimit = min(ratelimit, 32 >> (PAGE_SHIFT - 10));
1883
1884 preempt_disable();
1885 /*
1886 * This prevents one CPU to accumulate too many dirtied pages without
1887 * calling into balance_dirty_pages(), which can happen when there are
1888 * 1000+ tasks, all of them start dirtying pages at exactly the same
1889 * time, hence all honoured too large initial task->nr_dirtied_pause.
1890 */
1891 p = this_cpu_ptr(&bdp_ratelimits);
1892 if (unlikely(current->nr_dirtied >= ratelimit))
1893 *p = 0;
1894 else if (unlikely(*p >= ratelimit_pages)) {
1895 *p = 0;
1896 ratelimit = 0;
1897 }
1898 /*
1899 * Pick up the dirtied pages by the exited tasks. This avoids lots of
1900 * short-lived tasks (eg. gcc invocations in a kernel build) escaping
1901 * the dirty throttling and livelock other long-run dirtiers.
1902 */
1903 p = this_cpu_ptr(&dirty_throttle_leaks);
1904 if (*p > 0 && current->nr_dirtied < ratelimit) {
1905 unsigned long nr_pages_dirtied;
1906 nr_pages_dirtied = min(*p, ratelimit - current->nr_dirtied);
1907 *p -= nr_pages_dirtied;
1908 current->nr_dirtied += nr_pages_dirtied;
1909 }
1910 preempt_enable();
1911
1912 if (unlikely(current->nr_dirtied >= ratelimit))
1913 balance_dirty_pages(wb, current->nr_dirtied);
1914
1915 wb_put(wb);
1916}
1917EXPORT_SYMBOL(balance_dirty_pages_ratelimited);
1918
1919/**
1920 * wb_over_bg_thresh - does @wb need to be written back?
1921 * @wb: bdi_writeback of interest
1922 *
1923 * Determines whether background writeback should keep writing @wb or it's
1924 * clean enough.
1925 *
1926 * Return: %true if writeback should continue.
1927 */
1928bool wb_over_bg_thresh(struct bdi_writeback *wb)
1929{
1930 struct dirty_throttle_control gdtc_stor = { GDTC_INIT(wb) };
1931 struct dirty_throttle_control mdtc_stor = { MDTC_INIT(wb, &gdtc_stor) };
1932 struct dirty_throttle_control * const gdtc = &gdtc_stor;
1933 struct dirty_throttle_control * const mdtc = mdtc_valid(&mdtc_stor) ?
1934 &mdtc_stor : NULL;
1935
1936 /*
1937 * Similar to balance_dirty_pages() but ignores pages being written
1938 * as we're trying to decide whether to put more under writeback.
1939 */
1940 gdtc->avail = global_dirtyable_memory();
1941 gdtc->dirty = global_node_page_state(NR_FILE_DIRTY) +
1942 global_node_page_state(NR_UNSTABLE_NFS);
1943 domain_dirty_limits(gdtc);
1944
1945 if (gdtc->dirty > gdtc->bg_thresh)
1946 return true;
1947
1948 if (wb_stat(wb, WB_RECLAIMABLE) >
1949 wb_calc_thresh(gdtc->wb, gdtc->bg_thresh))
1950 return true;
1951
1952 if (mdtc) {
1953 unsigned long filepages, headroom, writeback;
1954
1955 mem_cgroup_wb_stats(wb, &filepages, &headroom, &mdtc->dirty,
1956 &writeback);
1957 mdtc_calc_avail(mdtc, filepages, headroom);
1958 domain_dirty_limits(mdtc); /* ditto, ignore writeback */
1959
1960 if (mdtc->dirty > mdtc->bg_thresh)
1961 return true;
1962
1963 if (wb_stat(wb, WB_RECLAIMABLE) >
1964 wb_calc_thresh(mdtc->wb, mdtc->bg_thresh))
1965 return true;
1966 }
1967
1968 return false;
1969}
1970
1971/*
1972 * sysctl handler for /proc/sys/vm/dirty_writeback_centisecs
1973 */
1974int dirty_writeback_centisecs_handler(struct ctl_table *table, int write,
1975 void __user *buffer, size_t *length, loff_t *ppos)
1976{
1977 unsigned int old_interval = dirty_writeback_interval;
1978 int ret;
1979
1980 ret = proc_dointvec(table, write, buffer, length, ppos);
1981
1982 /*
1983 * Writing 0 to dirty_writeback_interval will disable periodic writeback
1984 * and a different non-zero value will wakeup the writeback threads.
1985 * wb_wakeup_delayed() would be more appropriate, but it's a pain to
1986 * iterate over all bdis and wbs.
1987 * The reason we do this is to make the change take effect immediately.
1988 */
1989 if (!ret && write && dirty_writeback_interval &&
1990 dirty_writeback_interval != old_interval)
1991 wakeup_flusher_threads(WB_REASON_PERIODIC);
1992
1993 return ret;
1994}
1995
1996#ifdef CONFIG_BLOCK
1997void laptop_mode_timer_fn(struct timer_list *t)
1998{
1999 struct backing_dev_info *backing_dev_info =
2000 from_timer(backing_dev_info, t, laptop_mode_wb_timer);
2001
2002 wakeup_flusher_threads_bdi(backing_dev_info, WB_REASON_LAPTOP_TIMER);
2003}
2004
2005/*
2006 * We've spun up the disk and we're in laptop mode: schedule writeback
2007 * of all dirty data a few seconds from now. If the flush is already scheduled
2008 * then push it back - the user is still using the disk.
2009 */
2010void laptop_io_completion(struct backing_dev_info *info)
2011{
2012 mod_timer(&info->laptop_mode_wb_timer, jiffies + laptop_mode);
2013}
2014
2015/*
2016 * We're in laptop mode and we've just synced. The sync's writes will have
2017 * caused another writeback to be scheduled by laptop_io_completion.
2018 * Nothing needs to be written back anymore, so we unschedule the writeback.
2019 */
2020void laptop_sync_completion(void)
2021{
2022 struct backing_dev_info *bdi;
2023
2024 rcu_read_lock();
2025
2026 list_for_each_entry_rcu(bdi, &bdi_list, bdi_list)
2027 del_timer(&bdi->laptop_mode_wb_timer);
2028
2029 rcu_read_unlock();
2030}
2031#endif
2032
2033/*
2034 * If ratelimit_pages is too high then we can get into dirty-data overload
2035 * if a large number of processes all perform writes at the same time.
2036 * If it is too low then SMP machines will call the (expensive)
2037 * get_writeback_state too often.
2038 *
2039 * Here we set ratelimit_pages to a level which ensures that when all CPUs are
2040 * dirtying in parallel, we cannot go more than 3% (1/32) over the dirty memory
2041 * thresholds.
2042 */
2043
2044void writeback_set_ratelimit(void)
2045{
2046 struct wb_domain *dom = &global_wb_domain;
2047 unsigned long background_thresh;
2048 unsigned long dirty_thresh;
2049
2050 global_dirty_limits(&background_thresh, &dirty_thresh);
2051 dom->dirty_limit = dirty_thresh;
2052 ratelimit_pages = dirty_thresh / (num_online_cpus() * 32);
2053 if (ratelimit_pages < 16)
2054 ratelimit_pages = 16;
2055}
2056
2057static int page_writeback_cpu_online(unsigned int cpu)
2058{
2059 writeback_set_ratelimit();
2060 return 0;
2061}
2062
2063/*
2064 * Called early on to tune the page writeback dirty limits.
2065 *
2066 * We used to scale dirty pages according to how total memory
2067 * related to pages that could be allocated for buffers (by
2068 * comparing nr_free_buffer_pages() to vm_total_pages.
2069 *
2070 * However, that was when we used "dirty_ratio" to scale with
2071 * all memory, and we don't do that any more. "dirty_ratio"
2072 * is now applied to total non-HIGHPAGE memory (by subtracting
2073 * totalhigh_pages from vm_total_pages), and as such we can't
2074 * get into the old insane situation any more where we had
2075 * large amounts of dirty pages compared to a small amount of
2076 * non-HIGHMEM memory.
2077 *
2078 * But we might still want to scale the dirty_ratio by how
2079 * much memory the box has..
2080 */
2081void __init page_writeback_init(void)
2082{
2083 BUG_ON(wb_domain_init(&global_wb_domain, GFP_KERNEL));
2084
2085 cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "mm/writeback:online",
2086 page_writeback_cpu_online, NULL);
2087 cpuhp_setup_state(CPUHP_MM_WRITEBACK_DEAD, "mm/writeback:dead", NULL,
2088 page_writeback_cpu_online);
2089}
2090
2091/**
2092 * tag_pages_for_writeback - tag pages to be written by write_cache_pages
2093 * @mapping: address space structure to write
2094 * @start: starting page index
2095 * @end: ending page index (inclusive)
2096 *
2097 * This function scans the page range from @start to @end (inclusive) and tags
2098 * all pages that have DIRTY tag set with a special TOWRITE tag. The idea is
2099 * that write_cache_pages (or whoever calls this function) will then use
2100 * TOWRITE tag to identify pages eligible for writeback. This mechanism is
2101 * used to avoid livelocking of writeback by a process steadily creating new
2102 * dirty pages in the file (thus it is important for this function to be quick
2103 * so that it can tag pages faster than a dirtying process can create them).
2104 */
2105void tag_pages_for_writeback(struct address_space *mapping,
2106 pgoff_t start, pgoff_t end)
2107{
2108 XA_STATE(xas, &mapping->i_pages, start);
2109 unsigned int tagged = 0;
2110 void *page;
2111
2112 xas_lock_irq(&xas);
2113 xas_for_each_marked(&xas, page, end, PAGECACHE_TAG_DIRTY) {
2114 xas_set_mark(&xas, PAGECACHE_TAG_TOWRITE);
2115 if (++tagged % XA_CHECK_SCHED)
2116 continue;
2117
2118 xas_pause(&xas);
2119 xas_unlock_irq(&xas);
2120 cond_resched();
2121 xas_lock_irq(&xas);
2122 }
2123 xas_unlock_irq(&xas);
2124}
2125EXPORT_SYMBOL(tag_pages_for_writeback);
2126
2127/**
2128 * write_cache_pages - walk the list of dirty pages of the given address space and write all of them.
2129 * @mapping: address space structure to write
2130 * @wbc: subtract the number of written pages from *@wbc->nr_to_write
2131 * @writepage: function called for each page
2132 * @data: data passed to writepage function
2133 *
2134 * If a page is already under I/O, write_cache_pages() skips it, even
2135 * if it's dirty. This is desirable behaviour for memory-cleaning writeback,
2136 * but it is INCORRECT for data-integrity system calls such as fsync(). fsync()
2137 * and msync() need to guarantee that all the data which was dirty at the time
2138 * the call was made get new I/O started against them. If wbc->sync_mode is
2139 * WB_SYNC_ALL then we were called for data integrity and we must wait for
2140 * existing IO to complete.
2141 *
2142 * To avoid livelocks (when other process dirties new pages), we first tag
2143 * pages which should be written back with TOWRITE tag and only then start
2144 * writing them. For data-integrity sync we have to be careful so that we do
2145 * not miss some pages (e.g., because some other process has cleared TOWRITE
2146 * tag we set). The rule we follow is that TOWRITE tag can be cleared only
2147 * by the process clearing the DIRTY tag (and submitting the page for IO).
2148 *
2149 * To avoid deadlocks between range_cyclic writeback and callers that hold
2150 * pages in PageWriteback to aggregate IO until write_cache_pages() returns,
2151 * we do not loop back to the start of the file. Doing so causes a page
2152 * lock/page writeback access order inversion - we should only ever lock
2153 * multiple pages in ascending page->index order, and looping back to the start
2154 * of the file violates that rule and causes deadlocks.
2155 *
2156 * Return: %0 on success, negative error code otherwise
2157 */
2158int write_cache_pages(struct address_space *mapping,
2159 struct writeback_control *wbc, writepage_t writepage,
2160 void *data)
2161{
2162 int ret = 0;
2163 int done = 0;
2164 int error;
2165 struct pagevec pvec;
2166 int nr_pages;
2167 pgoff_t uninitialized_var(writeback_index);
2168 pgoff_t index;
2169 pgoff_t end; /* Inclusive */
2170 pgoff_t done_index;
2171 int range_whole = 0;
2172 xa_mark_t tag;
2173
2174 pagevec_init(&pvec);
2175 if (wbc->range_cyclic) {
2176 writeback_index = mapping->writeback_index; /* prev offset */
2177 index = writeback_index;
2178 end = -1;
2179 } else {
2180 index = wbc->range_start >> PAGE_SHIFT;
2181 end = wbc->range_end >> PAGE_SHIFT;
2182 if (wbc->range_start == 0 && wbc->range_end == LLONG_MAX)
2183 range_whole = 1;
2184 }
2185 if (wbc->sync_mode == WB_SYNC_ALL || wbc->tagged_writepages)
2186 tag = PAGECACHE_TAG_TOWRITE;
2187 else
2188 tag = PAGECACHE_TAG_DIRTY;
2189 if (wbc->sync_mode == WB_SYNC_ALL || wbc->tagged_writepages)
2190 tag_pages_for_writeback(mapping, index, end);
2191 done_index = index;
2192 while (!done && (index <= end)) {
2193 int i;
2194
2195 nr_pages = pagevec_lookup_range_tag(&pvec, mapping, &index, end,
2196 tag);
2197 if (nr_pages == 0)
2198 break;
2199
2200 for (i = 0; i < nr_pages; i++) {
2201 struct page *page = pvec.pages[i];
2202
2203 done_index = page->index;
2204
2205 lock_page(page);
2206
2207 /*
2208 * Page truncated or invalidated. We can freely skip it
2209 * then, even for data integrity operations: the page
2210 * has disappeared concurrently, so there could be no
2211 * real expectation of this data interity operation
2212 * even if there is now a new, dirty page at the same
2213 * pagecache address.
2214 */
2215 if (unlikely(page->mapping != mapping)) {
2216continue_unlock:
2217 unlock_page(page);
2218 continue;
2219 }
2220
2221 if (!PageDirty(page)) {
2222 /* someone wrote it for us */
2223 goto continue_unlock;
2224 }
2225
2226 if (PageWriteback(page)) {
2227 if (wbc->sync_mode != WB_SYNC_NONE)
2228 wait_on_page_writeback(page);
2229 else
2230 goto continue_unlock;
2231 }
2232
2233 BUG_ON(PageWriteback(page));
2234 if (!clear_page_dirty_for_io(page))
2235 goto continue_unlock;
2236
2237 trace_wbc_writepage(wbc, inode_to_bdi(mapping->host));
2238 error = (*writepage)(page, wbc, data);
2239 if (unlikely(error)) {
2240 /*
2241 * Handle errors according to the type of
2242 * writeback. There's no need to continue for
2243 * background writeback. Just push done_index
2244 * past this page so media errors won't choke
2245 * writeout for the entire file. For integrity
2246 * writeback, we must process the entire dirty
2247 * set regardless of errors because the fs may
2248 * still have state to clear for each page. In
2249 * that case we continue processing and return
2250 * the first error.
2251 */
2252 if (error == AOP_WRITEPAGE_ACTIVATE) {
2253 unlock_page(page);
2254 error = 0;
2255 } else if (wbc->sync_mode != WB_SYNC_ALL) {
2256 ret = error;
2257 done_index = page->index + 1;
2258 done = 1;
2259 break;
2260 }
2261 if (!ret)
2262 ret = error;
2263 }
2264
2265 /*
2266 * We stop writing back only if we are not doing
2267 * integrity sync. In case of integrity sync we have to
2268 * keep going until we have written all the pages
2269 * we tagged for writeback prior to entering this loop.
2270 */
2271 if (--wbc->nr_to_write <= 0 &&
2272 wbc->sync_mode == WB_SYNC_NONE) {
2273 done = 1;
2274 break;
2275 }
2276 }
2277 pagevec_release(&pvec);
2278 cond_resched();
2279 }
2280
2281 /*
2282 * If we hit the last page and there is more work to be done: wrap
2283 * back the index back to the start of the file for the next
2284 * time we are called.
2285 */
2286 if (wbc->range_cyclic && !done)
2287 done_index = 0;
2288 if (wbc->range_cyclic || (range_whole && wbc->nr_to_write > 0))
2289 mapping->writeback_index = done_index;
2290
2291 return ret;
2292}
2293EXPORT_SYMBOL(write_cache_pages);
2294
2295/*
2296 * Function used by generic_writepages to call the real writepage
2297 * function and set the mapping flags on error
2298 */
2299static int __writepage(struct page *page, struct writeback_control *wbc,
2300 void *data)
2301{
2302 struct address_space *mapping = data;
2303 int ret = mapping->a_ops->writepage(page, wbc);
2304 mapping_set_error(mapping, ret);
2305 return ret;
2306}
2307
2308/**
2309 * generic_writepages - walk the list of dirty pages of the given address space and writepage() all of them.
2310 * @mapping: address space structure to write
2311 * @wbc: subtract the number of written pages from *@wbc->nr_to_write
2312 *
2313 * This is a library function, which implements the writepages()
2314 * address_space_operation.
2315 *
2316 * Return: %0 on success, negative error code otherwise
2317 */
2318int generic_writepages(struct address_space *mapping,
2319 struct writeback_control *wbc)
2320{
2321 struct blk_plug plug;
2322 int ret;
2323
2324 /* deal with chardevs and other special file */
2325 if (!mapping->a_ops->writepage)
2326 return 0;
2327
2328 blk_start_plug(&plug);
2329 ret = write_cache_pages(mapping, wbc, __writepage, mapping);
2330 blk_finish_plug(&plug);
2331 return ret;
2332}
2333
2334EXPORT_SYMBOL(generic_writepages);
2335
2336int do_writepages(struct address_space *mapping, struct writeback_control *wbc)
2337{
2338 int ret;
2339
2340 if (wbc->nr_to_write <= 0)
2341 return 0;
2342 while (1) {
2343 if (mapping->a_ops->writepages)
2344 ret = mapping->a_ops->writepages(mapping, wbc);
2345 else
2346 ret = generic_writepages(mapping, wbc);
2347 if ((ret != -ENOMEM) || (wbc->sync_mode != WB_SYNC_ALL))
2348 break;
2349 cond_resched();
2350 congestion_wait(BLK_RW_ASYNC, HZ/50);
2351 }
2352 return ret;
2353}
2354
2355/**
2356 * write_one_page - write out a single page and wait on I/O
2357 * @page: the page to write
2358 *
2359 * The page must be locked by the caller and will be unlocked upon return.
2360 *
2361 * Note that the mapping's AS_EIO/AS_ENOSPC flags will be cleared when this
2362 * function returns.
2363 *
2364 * Return: %0 on success, negative error code otherwise
2365 */
2366int write_one_page(struct page *page)
2367{
2368 struct address_space *mapping = page->mapping;
2369 int ret = 0;
2370 struct writeback_control wbc = {
2371 .sync_mode = WB_SYNC_ALL,
2372 .nr_to_write = 1,
2373 };
2374
2375 BUG_ON(!PageLocked(page));
2376
2377 wait_on_page_writeback(page);
2378
2379 if (clear_page_dirty_for_io(page)) {
2380 get_page(page);
2381 ret = mapping->a_ops->writepage(page, &wbc);
2382 if (ret == 0)
2383 wait_on_page_writeback(page);
2384 put_page(page);
2385 } else {
2386 unlock_page(page);
2387 }
2388
2389 if (!ret)
2390 ret = filemap_check_errors(mapping);
2391 return ret;
2392}
2393EXPORT_SYMBOL(write_one_page);
2394
2395/*
2396 * For address_spaces which do not use buffers nor write back.
2397 */
2398int __set_page_dirty_no_writeback(struct page *page)
2399{
2400 if (!PageDirty(page))
2401 return !TestSetPageDirty(page);
2402 return 0;
2403}
2404
2405/*
2406 * Helper function for set_page_dirty family.
2407 *
2408 * Caller must hold lock_page_memcg().
2409 *
2410 * NOTE: This relies on being atomic wrt interrupts.
2411 */
2412void account_page_dirtied(struct page *page, struct address_space *mapping)
2413{
2414 struct inode *inode = mapping->host;
2415
2416 trace_writeback_dirty_page(page, mapping);
2417
2418 if (mapping_cap_account_dirty(mapping)) {
2419 struct bdi_writeback *wb;
2420
2421 inode_attach_wb(inode, page);
2422 wb = inode_to_wb(inode);
2423
2424 __inc_lruvec_page_state(page, NR_FILE_DIRTY);
2425 __inc_zone_page_state(page, NR_ZONE_WRITE_PENDING);
2426 __inc_node_page_state(page, NR_DIRTIED);
2427 inc_wb_stat(wb, WB_RECLAIMABLE);
2428 inc_wb_stat(wb, WB_DIRTIED);
2429 task_io_account_write(PAGE_SIZE);
2430 current->nr_dirtied++;
2431 this_cpu_inc(bdp_ratelimits);
2432
2433 mem_cgroup_track_foreign_dirty(page, wb);
2434 }
2435}
2436
2437/*
2438 * Helper function for deaccounting dirty page without writeback.
2439 *
2440 * Caller must hold lock_page_memcg().
2441 */
2442void account_page_cleaned(struct page *page, struct address_space *mapping,
2443 struct bdi_writeback *wb)
2444{
2445 if (mapping_cap_account_dirty(mapping)) {
2446 dec_lruvec_page_state(page, NR_FILE_DIRTY);
2447 dec_zone_page_state(page, NR_ZONE_WRITE_PENDING);
2448 dec_wb_stat(wb, WB_RECLAIMABLE);
2449 task_io_account_cancelled_write(PAGE_SIZE);
2450 }
2451}
2452
2453/*
2454 * For address_spaces which do not use buffers. Just tag the page as dirty in
2455 * the xarray.
2456 *
2457 * This is also used when a single buffer is being dirtied: we want to set the
2458 * page dirty in that case, but not all the buffers. This is a "bottom-up"
2459 * dirtying, whereas __set_page_dirty_buffers() is a "top-down" dirtying.
2460 *
2461 * The caller must ensure this doesn't race with truncation. Most will simply
2462 * hold the page lock, but e.g. zap_pte_range() calls with the page mapped and
2463 * the pte lock held, which also locks out truncation.
2464 */
2465int __set_page_dirty_nobuffers(struct page *page)
2466{
2467 lock_page_memcg(page);
2468 if (!TestSetPageDirty(page)) {
2469 struct address_space *mapping = page_mapping(page);
2470 unsigned long flags;
2471
2472 if (!mapping) {
2473 unlock_page_memcg(page);
2474 return 1;
2475 }
2476
2477 xa_lock_irqsave(&mapping->i_pages, flags);
2478 BUG_ON(page_mapping(page) != mapping);
2479 WARN_ON_ONCE(!PagePrivate(page) && !PageUptodate(page));
2480 account_page_dirtied(page, mapping);
2481 __xa_set_mark(&mapping->i_pages, page_index(page),
2482 PAGECACHE_TAG_DIRTY);
2483 xa_unlock_irqrestore(&mapping->i_pages, flags);
2484 unlock_page_memcg(page);
2485
2486 if (mapping->host) {
2487 /* !PageAnon && !swapper_space */
2488 __mark_inode_dirty(mapping->host, I_DIRTY_PAGES);
2489 }
2490 return 1;
2491 }
2492 unlock_page_memcg(page);
2493 return 0;
2494}
2495EXPORT_SYMBOL(__set_page_dirty_nobuffers);
2496
2497/*
2498 * Call this whenever redirtying a page, to de-account the dirty counters
2499 * (NR_DIRTIED, WB_DIRTIED, tsk->nr_dirtied), so that they match the written
2500 * counters (NR_WRITTEN, WB_WRITTEN) in long term. The mismatches will lead to
2501 * systematic errors in balanced_dirty_ratelimit and the dirty pages position
2502 * control.
2503 */
2504void account_page_redirty(struct page *page)
2505{
2506 struct address_space *mapping = page->mapping;
2507
2508 if (mapping && mapping_cap_account_dirty(mapping)) {
2509 struct inode *inode = mapping->host;
2510 struct bdi_writeback *wb;
2511 struct wb_lock_cookie cookie = {};
2512
2513 wb = unlocked_inode_to_wb_begin(inode, &cookie);
2514 current->nr_dirtied--;
2515 dec_node_page_state(page, NR_DIRTIED);
2516 dec_wb_stat(wb, WB_DIRTIED);
2517 unlocked_inode_to_wb_end(inode, &cookie);
2518 }
2519}
2520EXPORT_SYMBOL(account_page_redirty);
2521
2522/*
2523 * When a writepage implementation decides that it doesn't want to write this
2524 * page for some reason, it should redirty the locked page via
2525 * redirty_page_for_writepage() and it should then unlock the page and return 0
2526 */
2527int redirty_page_for_writepage(struct writeback_control *wbc, struct page *page)
2528{
2529 int ret;
2530
2531 wbc->pages_skipped++;
2532 ret = __set_page_dirty_nobuffers(page);
2533 account_page_redirty(page);
2534 return ret;
2535}
2536EXPORT_SYMBOL(redirty_page_for_writepage);
2537
2538/*
2539 * Dirty a page.
2540 *
2541 * For pages with a mapping this should be done under the page lock
2542 * for the benefit of asynchronous memory errors who prefer a consistent
2543 * dirty state. This rule can be broken in some special cases,
2544 * but should be better not to.
2545 *
2546 * If the mapping doesn't provide a set_page_dirty a_op, then
2547 * just fall through and assume that it wants buffer_heads.
2548 */
2549int set_page_dirty(struct page *page)
2550{
2551 struct address_space *mapping = page_mapping(page);
2552
2553 page = compound_head(page);
2554 if (likely(mapping)) {
2555 int (*spd)(struct page *) = mapping->a_ops->set_page_dirty;
2556 /*
2557 * readahead/lru_deactivate_page could remain
2558 * PG_readahead/PG_reclaim due to race with end_page_writeback
2559 * About readahead, if the page is written, the flags would be
2560 * reset. So no problem.
2561 * About lru_deactivate_page, if the page is redirty, the flag
2562 * will be reset. So no problem. but if the page is used by readahead
2563 * it will confuse readahead and make it restart the size rampup
2564 * process. But it's a trivial problem.
2565 */
2566 if (PageReclaim(page))
2567 ClearPageReclaim(page);
2568#ifdef CONFIG_BLOCK
2569 if (!spd)
2570 spd = __set_page_dirty_buffers;
2571#endif
2572 return (*spd)(page);
2573 }
2574 if (!PageDirty(page)) {
2575 if (!TestSetPageDirty(page))
2576 return 1;
2577 }
2578 return 0;
2579}
2580EXPORT_SYMBOL(set_page_dirty);
2581
2582/*
2583 * set_page_dirty() is racy if the caller has no reference against
2584 * page->mapping->host, and if the page is unlocked. This is because another
2585 * CPU could truncate the page off the mapping and then free the mapping.
2586 *
2587 * Usually, the page _is_ locked, or the caller is a user-space process which
2588 * holds a reference on the inode by having an open file.
2589 *
2590 * In other cases, the page should be locked before running set_page_dirty().
2591 */
2592int set_page_dirty_lock(struct page *page)
2593{
2594 int ret;
2595
2596 lock_page(page);
2597 ret = set_page_dirty(page);
2598 unlock_page(page);
2599 return ret;
2600}
2601EXPORT_SYMBOL(set_page_dirty_lock);
2602
2603/*
2604 * This cancels just the dirty bit on the kernel page itself, it does NOT
2605 * actually remove dirty bits on any mmap's that may be around. It also
2606 * leaves the page tagged dirty, so any sync activity will still find it on
2607 * the dirty lists, and in particular, clear_page_dirty_for_io() will still
2608 * look at the dirty bits in the VM.
2609 *
2610 * Doing this should *normally* only ever be done when a page is truncated,
2611 * and is not actually mapped anywhere at all. However, fs/buffer.c does
2612 * this when it notices that somebody has cleaned out all the buffers on a
2613 * page without actually doing it through the VM. Can you say "ext3 is
2614 * horribly ugly"? Thought you could.
2615 */
2616void __cancel_dirty_page(struct page *page)
2617{
2618 struct address_space *mapping = page_mapping(page);
2619
2620 if (mapping_cap_account_dirty(mapping)) {
2621 struct inode *inode = mapping->host;
2622 struct bdi_writeback *wb;
2623 struct wb_lock_cookie cookie = {};
2624
2625 lock_page_memcg(page);
2626 wb = unlocked_inode_to_wb_begin(inode, &cookie);
2627
2628 if (TestClearPageDirty(page))
2629 account_page_cleaned(page, mapping, wb);
2630
2631 unlocked_inode_to_wb_end(inode, &cookie);
2632 unlock_page_memcg(page);
2633 } else {
2634 ClearPageDirty(page);
2635 }
2636}
2637EXPORT_SYMBOL(__cancel_dirty_page);
2638
2639/*
2640 * Clear a page's dirty flag, while caring for dirty memory accounting.
2641 * Returns true if the page was previously dirty.
2642 *
2643 * This is for preparing to put the page under writeout. We leave the page
2644 * tagged as dirty in the xarray so that a concurrent write-for-sync
2645 * can discover it via a PAGECACHE_TAG_DIRTY walk. The ->writepage
2646 * implementation will run either set_page_writeback() or set_page_dirty(),
2647 * at which stage we bring the page's dirty flag and xarray dirty tag
2648 * back into sync.
2649 *
2650 * This incoherency between the page's dirty flag and xarray tag is
2651 * unfortunate, but it only exists while the page is locked.
2652 */
2653int clear_page_dirty_for_io(struct page *page)
2654{
2655 struct address_space *mapping = page_mapping(page);
2656 int ret = 0;
2657
2658 BUG_ON(!PageLocked(page));
2659
2660 if (mapping && mapping_cap_account_dirty(mapping)) {
2661 struct inode *inode = mapping->host;
2662 struct bdi_writeback *wb;
2663 struct wb_lock_cookie cookie = {};
2664
2665 /*
2666 * Yes, Virginia, this is indeed insane.
2667 *
2668 * We use this sequence to make sure that
2669 * (a) we account for dirty stats properly
2670 * (b) we tell the low-level filesystem to
2671 * mark the whole page dirty if it was
2672 * dirty in a pagetable. Only to then
2673 * (c) clean the page again and return 1 to
2674 * cause the writeback.
2675 *
2676 * This way we avoid all nasty races with the
2677 * dirty bit in multiple places and clearing
2678 * them concurrently from different threads.
2679 *
2680 * Note! Normally the "set_page_dirty(page)"
2681 * has no effect on the actual dirty bit - since
2682 * that will already usually be set. But we
2683 * need the side effects, and it can help us
2684 * avoid races.
2685 *
2686 * We basically use the page "master dirty bit"
2687 * as a serialization point for all the different
2688 * threads doing their things.
2689 */
2690 if (page_mkclean(page))
2691 set_page_dirty(page);
2692 /*
2693 * We carefully synchronise fault handlers against
2694 * installing a dirty pte and marking the page dirty
2695 * at this point. We do this by having them hold the
2696 * page lock while dirtying the page, and pages are
2697 * always locked coming in here, so we get the desired
2698 * exclusion.
2699 */
2700 wb = unlocked_inode_to_wb_begin(inode, &cookie);
2701 if (TestClearPageDirty(page)) {
2702 dec_lruvec_page_state(page, NR_FILE_DIRTY);
2703 dec_zone_page_state(page, NR_ZONE_WRITE_PENDING);
2704 dec_wb_stat(wb, WB_RECLAIMABLE);
2705 ret = 1;
2706 }
2707 unlocked_inode_to_wb_end(inode, &cookie);
2708 return ret;
2709 }
2710 return TestClearPageDirty(page);
2711}
2712EXPORT_SYMBOL(clear_page_dirty_for_io);
2713
2714int test_clear_page_writeback(struct page *page)
2715{
2716 struct address_space *mapping = page_mapping(page);
2717 struct mem_cgroup *memcg;
2718 struct lruvec *lruvec;
2719 int ret;
2720
2721 memcg = lock_page_memcg(page);
2722 lruvec = mem_cgroup_page_lruvec(page, page_pgdat(page));
2723 if (mapping && mapping_use_writeback_tags(mapping)) {
2724 struct inode *inode = mapping->host;
2725 struct backing_dev_info *bdi = inode_to_bdi(inode);
2726 unsigned long flags;
2727
2728 xa_lock_irqsave(&mapping->i_pages, flags);
2729 ret = TestClearPageWriteback(page);
2730 if (ret) {
2731 __xa_clear_mark(&mapping->i_pages, page_index(page),
2732 PAGECACHE_TAG_WRITEBACK);
2733 if (bdi_cap_account_writeback(bdi)) {
2734 struct bdi_writeback *wb = inode_to_wb(inode);
2735
2736 dec_wb_stat(wb, WB_WRITEBACK);
2737 __wb_writeout_inc(wb);
2738 }
2739 }
2740
2741 if (mapping->host && !mapping_tagged(mapping,
2742 PAGECACHE_TAG_WRITEBACK))
2743 sb_clear_inode_writeback(mapping->host);
2744
2745 xa_unlock_irqrestore(&mapping->i_pages, flags);
2746 } else {
2747 ret = TestClearPageWriteback(page);
2748 }
2749 /*
2750 * NOTE: Page might be free now! Writeback doesn't hold a page
2751 * reference on its own, it relies on truncation to wait for
2752 * the clearing of PG_writeback. The below can only access
2753 * page state that is static across allocation cycles.
2754 */
2755 if (ret) {
2756 dec_lruvec_state(lruvec, NR_WRITEBACK);
2757 dec_zone_page_state(page, NR_ZONE_WRITE_PENDING);
2758 inc_node_page_state(page, NR_WRITTEN);
2759 }
2760 __unlock_page_memcg(memcg);
2761 return ret;
2762}
2763
2764int __test_set_page_writeback(struct page *page, bool keep_write)
2765{
2766 struct address_space *mapping = page_mapping(page);
2767 int ret;
2768
2769 lock_page_memcg(page);
2770 if (mapping && mapping_use_writeback_tags(mapping)) {
2771 XA_STATE(xas, &mapping->i_pages, page_index(page));
2772 struct inode *inode = mapping->host;
2773 struct backing_dev_info *bdi = inode_to_bdi(inode);
2774 unsigned long flags;
2775
2776 xas_lock_irqsave(&xas, flags);
2777 xas_load(&xas);
2778 ret = TestSetPageWriteback(page);
2779 if (!ret) {
2780 bool on_wblist;
2781
2782 on_wblist = mapping_tagged(mapping,
2783 PAGECACHE_TAG_WRITEBACK);
2784
2785 xas_set_mark(&xas, PAGECACHE_TAG_WRITEBACK);
2786 if (bdi_cap_account_writeback(bdi))
2787 inc_wb_stat(inode_to_wb(inode), WB_WRITEBACK);
2788
2789 /*
2790 * We can come through here when swapping anonymous
2791 * pages, so we don't necessarily have an inode to track
2792 * for sync.
2793 */
2794 if (mapping->host && !on_wblist)
2795 sb_mark_inode_writeback(mapping->host);
2796 }
2797 if (!PageDirty(page))
2798 xas_clear_mark(&xas, PAGECACHE_TAG_DIRTY);
2799 if (!keep_write)
2800 xas_clear_mark(&xas, PAGECACHE_TAG_TOWRITE);
2801 xas_unlock_irqrestore(&xas, flags);
2802 } else {
2803 ret = TestSetPageWriteback(page);
2804 }
2805 if (!ret) {
2806 inc_lruvec_page_state(page, NR_WRITEBACK);
2807 inc_zone_page_state(page, NR_ZONE_WRITE_PENDING);
2808 }
2809 unlock_page_memcg(page);
2810 return ret;
2811
2812}
2813EXPORT_SYMBOL(__test_set_page_writeback);
2814
2815/*
2816 * Wait for a page to complete writeback
2817 */
2818void wait_on_page_writeback(struct page *page)
2819{
2820 if (PageWriteback(page)) {
2821 trace_wait_on_page_writeback(page, page_mapping(page));
2822 wait_on_page_bit(page, PG_writeback);
2823 }
2824}
2825EXPORT_SYMBOL_GPL(wait_on_page_writeback);
2826
2827/**
2828 * wait_for_stable_page() - wait for writeback to finish, if necessary.
2829 * @page: The page to wait on.
2830 *
2831 * This function determines if the given page is related to a backing device
2832 * that requires page contents to be held stable during writeback. If so, then
2833 * it will wait for any pending writeback to complete.
2834 */
2835void wait_for_stable_page(struct page *page)
2836{
2837 if (bdi_cap_stable_pages_required(inode_to_bdi(page->mapping->host)))
2838 wait_on_page_writeback(page);
2839}
2840EXPORT_SYMBOL_GPL(wait_for_stable_page);
1/*
2 * mm/page-writeback.c
3 *
4 * Copyright (C) 2002, Linus Torvalds.
5 * Copyright (C) 2007 Red Hat, Inc., Peter Zijlstra <pzijlstr@redhat.com>
6 *
7 * Contains functions related to writing back dirty pages at the
8 * address_space level.
9 *
10 * 10Apr2002 Andrew Morton
11 * Initial version
12 */
13
14#include <linux/kernel.h>
15#include <linux/module.h>
16#include <linux/spinlock.h>
17#include <linux/fs.h>
18#include <linux/mm.h>
19#include <linux/swap.h>
20#include <linux/slab.h>
21#include <linux/pagemap.h>
22#include <linux/writeback.h>
23#include <linux/init.h>
24#include <linux/backing-dev.h>
25#include <linux/task_io_accounting_ops.h>
26#include <linux/blkdev.h>
27#include <linux/mpage.h>
28#include <linux/rmap.h>
29#include <linux/percpu.h>
30#include <linux/notifier.h>
31#include <linux/smp.h>
32#include <linux/sysctl.h>
33#include <linux/cpu.h>
34#include <linux/syscalls.h>
35#include <linux/buffer_head.h>
36#include <linux/pagevec.h>
37#include <trace/events/writeback.h>
38
39/*
40 * Sleep at most 200ms at a time in balance_dirty_pages().
41 */
42#define MAX_PAUSE max(HZ/5, 1)
43
44/*
45 * Estimate write bandwidth at 200ms intervals.
46 */
47#define BANDWIDTH_INTERVAL max(HZ/5, 1)
48
49/*
50 * After a CPU has dirtied this many pages, balance_dirty_pages_ratelimited
51 * will look to see if it needs to force writeback or throttling.
52 */
53static long ratelimit_pages = 32;
54
55/*
56 * When balance_dirty_pages decides that the caller needs to perform some
57 * non-background writeback, this is how many pages it will attempt to write.
58 * It should be somewhat larger than dirtied pages to ensure that reasonably
59 * large amounts of I/O are submitted.
60 */
61static inline long sync_writeback_pages(unsigned long dirtied)
62{
63 if (dirtied < ratelimit_pages)
64 dirtied = ratelimit_pages;
65
66 return dirtied + dirtied / 2;
67}
68
69/* The following parameters are exported via /proc/sys/vm */
70
71/*
72 * Start background writeback (via writeback threads) at this percentage
73 */
74int dirty_background_ratio = 10;
75
76/*
77 * dirty_background_bytes starts at 0 (disabled) so that it is a function of
78 * dirty_background_ratio * the amount of dirtyable memory
79 */
80unsigned long dirty_background_bytes;
81
82/*
83 * free highmem will not be subtracted from the total free memory
84 * for calculating free ratios if vm_highmem_is_dirtyable is true
85 */
86int vm_highmem_is_dirtyable;
87
88/*
89 * The generator of dirty data starts writeback at this percentage
90 */
91int vm_dirty_ratio = 20;
92
93/*
94 * vm_dirty_bytes starts at 0 (disabled) so that it is a function of
95 * vm_dirty_ratio * the amount of dirtyable memory
96 */
97unsigned long vm_dirty_bytes;
98
99/*
100 * The interval between `kupdate'-style writebacks
101 */
102unsigned int dirty_writeback_interval = 5 * 100; /* centiseconds */
103
104/*
105 * The longest time for which data is allowed to remain dirty
106 */
107unsigned int dirty_expire_interval = 30 * 100; /* centiseconds */
108
109/*
110 * Flag that makes the machine dump writes/reads and block dirtyings.
111 */
112int block_dump;
113
114/*
115 * Flag that puts the machine in "laptop mode". Doubles as a timeout in jiffies:
116 * a full sync is triggered after this time elapses without any disk activity.
117 */
118int laptop_mode;
119
120EXPORT_SYMBOL(laptop_mode);
121
122/* End of sysctl-exported parameters */
123
124unsigned long global_dirty_limit;
125
126/*
127 * Scale the writeback cache size proportional to the relative writeout speeds.
128 *
129 * We do this by keeping a floating proportion between BDIs, based on page
130 * writeback completions [end_page_writeback()]. Those devices that write out
131 * pages fastest will get the larger share, while the slower will get a smaller
132 * share.
133 *
134 * We use page writeout completions because we are interested in getting rid of
135 * dirty pages. Having them written out is the primary goal.
136 *
137 * We introduce a concept of time, a period over which we measure these events,
138 * because demand can/will vary over time. The length of this period itself is
139 * measured in page writeback completions.
140 *
141 */
142static struct prop_descriptor vm_completions;
143static struct prop_descriptor vm_dirties;
144
145/*
146 * couple the period to the dirty_ratio:
147 *
148 * period/2 ~ roundup_pow_of_two(dirty limit)
149 */
150static int calc_period_shift(void)
151{
152 unsigned long dirty_total;
153
154 if (vm_dirty_bytes)
155 dirty_total = vm_dirty_bytes / PAGE_SIZE;
156 else
157 dirty_total = (vm_dirty_ratio * determine_dirtyable_memory()) /
158 100;
159 return 2 + ilog2(dirty_total - 1);
160}
161
162/*
163 * update the period when the dirty threshold changes.
164 */
165static void update_completion_period(void)
166{
167 int shift = calc_period_shift();
168 prop_change_shift(&vm_completions, shift);
169 prop_change_shift(&vm_dirties, shift);
170}
171
172int dirty_background_ratio_handler(struct ctl_table *table, int write,
173 void __user *buffer, size_t *lenp,
174 loff_t *ppos)
175{
176 int ret;
177
178 ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
179 if (ret == 0 && write)
180 dirty_background_bytes = 0;
181 return ret;
182}
183
184int dirty_background_bytes_handler(struct ctl_table *table, int write,
185 void __user *buffer, size_t *lenp,
186 loff_t *ppos)
187{
188 int ret;
189
190 ret = proc_doulongvec_minmax(table, write, buffer, lenp, ppos);
191 if (ret == 0 && write)
192 dirty_background_ratio = 0;
193 return ret;
194}
195
196int dirty_ratio_handler(struct ctl_table *table, int write,
197 void __user *buffer, size_t *lenp,
198 loff_t *ppos)
199{
200 int old_ratio = vm_dirty_ratio;
201 int ret;
202
203 ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
204 if (ret == 0 && write && vm_dirty_ratio != old_ratio) {
205 update_completion_period();
206 vm_dirty_bytes = 0;
207 }
208 return ret;
209}
210
211
212int dirty_bytes_handler(struct ctl_table *table, int write,
213 void __user *buffer, size_t *lenp,
214 loff_t *ppos)
215{
216 unsigned long old_bytes = vm_dirty_bytes;
217 int ret;
218
219 ret = proc_doulongvec_minmax(table, write, buffer, lenp, ppos);
220 if (ret == 0 && write && vm_dirty_bytes != old_bytes) {
221 update_completion_period();
222 vm_dirty_ratio = 0;
223 }
224 return ret;
225}
226
227/*
228 * Increment the BDI's writeout completion count and the global writeout
229 * completion count. Called from test_clear_page_writeback().
230 */
231static inline void __bdi_writeout_inc(struct backing_dev_info *bdi)
232{
233 __inc_bdi_stat(bdi, BDI_WRITTEN);
234 __prop_inc_percpu_max(&vm_completions, &bdi->completions,
235 bdi->max_prop_frac);
236}
237
238void bdi_writeout_inc(struct backing_dev_info *bdi)
239{
240 unsigned long flags;
241
242 local_irq_save(flags);
243 __bdi_writeout_inc(bdi);
244 local_irq_restore(flags);
245}
246EXPORT_SYMBOL_GPL(bdi_writeout_inc);
247
248void task_dirty_inc(struct task_struct *tsk)
249{
250 prop_inc_single(&vm_dirties, &tsk->dirties);
251}
252
253/*
254 * Obtain an accurate fraction of the BDI's portion.
255 */
256static void bdi_writeout_fraction(struct backing_dev_info *bdi,
257 long *numerator, long *denominator)
258{
259 prop_fraction_percpu(&vm_completions, &bdi->completions,
260 numerator, denominator);
261}
262
263static inline void task_dirties_fraction(struct task_struct *tsk,
264 long *numerator, long *denominator)
265{
266 prop_fraction_single(&vm_dirties, &tsk->dirties,
267 numerator, denominator);
268}
269
270/*
271 * task_dirty_limit - scale down dirty throttling threshold for one task
272 *
273 * task specific dirty limit:
274 *
275 * dirty -= (dirty/8) * p_{t}
276 *
277 * To protect light/slow dirtying tasks from heavier/fast ones, we start
278 * throttling individual tasks before reaching the bdi dirty limit.
279 * Relatively low thresholds will be allocated to heavy dirtiers. So when
280 * dirty pages grow large, heavy dirtiers will be throttled first, which will
281 * effectively curb the growth of dirty pages. Light dirtiers with high enough
282 * dirty threshold may never get throttled.
283 */
284#define TASK_LIMIT_FRACTION 8
285static unsigned long task_dirty_limit(struct task_struct *tsk,
286 unsigned long bdi_dirty)
287{
288 long numerator, denominator;
289 unsigned long dirty = bdi_dirty;
290 u64 inv = dirty / TASK_LIMIT_FRACTION;
291
292 task_dirties_fraction(tsk, &numerator, &denominator);
293 inv *= numerator;
294 do_div(inv, denominator);
295
296 dirty -= inv;
297
298 return max(dirty, bdi_dirty/2);
299}
300
301/* Minimum limit for any task */
302static unsigned long task_min_dirty_limit(unsigned long bdi_dirty)
303{
304 return bdi_dirty - bdi_dirty / TASK_LIMIT_FRACTION;
305}
306
307/*
308 *
309 */
310static unsigned int bdi_min_ratio;
311
312int bdi_set_min_ratio(struct backing_dev_info *bdi, unsigned int min_ratio)
313{
314 int ret = 0;
315
316 spin_lock_bh(&bdi_lock);
317 if (min_ratio > bdi->max_ratio) {
318 ret = -EINVAL;
319 } else {
320 min_ratio -= bdi->min_ratio;
321 if (bdi_min_ratio + min_ratio < 100) {
322 bdi_min_ratio += min_ratio;
323 bdi->min_ratio += min_ratio;
324 } else {
325 ret = -EINVAL;
326 }
327 }
328 spin_unlock_bh(&bdi_lock);
329
330 return ret;
331}
332
333int bdi_set_max_ratio(struct backing_dev_info *bdi, unsigned max_ratio)
334{
335 int ret = 0;
336
337 if (max_ratio > 100)
338 return -EINVAL;
339
340 spin_lock_bh(&bdi_lock);
341 if (bdi->min_ratio > max_ratio) {
342 ret = -EINVAL;
343 } else {
344 bdi->max_ratio = max_ratio;
345 bdi->max_prop_frac = (PROP_FRAC_BASE * max_ratio) / 100;
346 }
347 spin_unlock_bh(&bdi_lock);
348
349 return ret;
350}
351EXPORT_SYMBOL(bdi_set_max_ratio);
352
353/*
354 * Work out the current dirty-memory clamping and background writeout
355 * thresholds.
356 *
357 * The main aim here is to lower them aggressively if there is a lot of mapped
358 * memory around. To avoid stressing page reclaim with lots of unreclaimable
359 * pages. It is better to clamp down on writers than to start swapping, and
360 * performing lots of scanning.
361 *
362 * We only allow 1/2 of the currently-unmapped memory to be dirtied.
363 *
364 * We don't permit the clamping level to fall below 5% - that is getting rather
365 * excessive.
366 *
367 * We make sure that the background writeout level is below the adjusted
368 * clamping level.
369 */
370
371static unsigned long highmem_dirtyable_memory(unsigned long total)
372{
373#ifdef CONFIG_HIGHMEM
374 int node;
375 unsigned long x = 0;
376
377 for_each_node_state(node, N_HIGH_MEMORY) {
378 struct zone *z =
379 &NODE_DATA(node)->node_zones[ZONE_HIGHMEM];
380
381 x += zone_page_state(z, NR_FREE_PAGES) +
382 zone_reclaimable_pages(z);
383 }
384 /*
385 * Make sure that the number of highmem pages is never larger
386 * than the number of the total dirtyable memory. This can only
387 * occur in very strange VM situations but we want to make sure
388 * that this does not occur.
389 */
390 return min(x, total);
391#else
392 return 0;
393#endif
394}
395
396/**
397 * determine_dirtyable_memory - amount of memory that may be used
398 *
399 * Returns the numebr of pages that can currently be freed and used
400 * by the kernel for direct mappings.
401 */
402unsigned long determine_dirtyable_memory(void)
403{
404 unsigned long x;
405
406 x = global_page_state(NR_FREE_PAGES) + global_reclaimable_pages();
407
408 if (!vm_highmem_is_dirtyable)
409 x -= highmem_dirtyable_memory(x);
410
411 return x + 1; /* Ensure that we never return 0 */
412}
413
414static unsigned long hard_dirty_limit(unsigned long thresh)
415{
416 return max(thresh, global_dirty_limit);
417}
418
419/*
420 * global_dirty_limits - background-writeback and dirty-throttling thresholds
421 *
422 * Calculate the dirty thresholds based on sysctl parameters
423 * - vm.dirty_background_ratio or vm.dirty_background_bytes
424 * - vm.dirty_ratio or vm.dirty_bytes
425 * The dirty limits will be lifted by 1/4 for PF_LESS_THROTTLE (ie. nfsd) and
426 * real-time tasks.
427 */
428void global_dirty_limits(unsigned long *pbackground, unsigned long *pdirty)
429{
430 unsigned long background;
431 unsigned long dirty;
432 unsigned long uninitialized_var(available_memory);
433 struct task_struct *tsk;
434
435 if (!vm_dirty_bytes || !dirty_background_bytes)
436 available_memory = determine_dirtyable_memory();
437
438 if (vm_dirty_bytes)
439 dirty = DIV_ROUND_UP(vm_dirty_bytes, PAGE_SIZE);
440 else
441 dirty = (vm_dirty_ratio * available_memory) / 100;
442
443 if (dirty_background_bytes)
444 background = DIV_ROUND_UP(dirty_background_bytes, PAGE_SIZE);
445 else
446 background = (dirty_background_ratio * available_memory) / 100;
447
448 if (background >= dirty)
449 background = dirty / 2;
450 tsk = current;
451 if (tsk->flags & PF_LESS_THROTTLE || rt_task(tsk)) {
452 background += background / 4;
453 dirty += dirty / 4;
454 }
455 *pbackground = background;
456 *pdirty = dirty;
457 trace_global_dirty_state(background, dirty);
458}
459
460/**
461 * bdi_dirty_limit - @bdi's share of dirty throttling threshold
462 * @bdi: the backing_dev_info to query
463 * @dirty: global dirty limit in pages
464 *
465 * Returns @bdi's dirty limit in pages. The term "dirty" in the context of
466 * dirty balancing includes all PG_dirty, PG_writeback and NFS unstable pages.
467 * And the "limit" in the name is not seriously taken as hard limit in
468 * balance_dirty_pages().
469 *
470 * It allocates high/low dirty limits to fast/slow devices, in order to prevent
471 * - starving fast devices
472 * - piling up dirty pages (that will take long time to sync) on slow devices
473 *
474 * The bdi's share of dirty limit will be adapting to its throughput and
475 * bounded by the bdi->min_ratio and/or bdi->max_ratio parameters, if set.
476 */
477unsigned long bdi_dirty_limit(struct backing_dev_info *bdi, unsigned long dirty)
478{
479 u64 bdi_dirty;
480 long numerator, denominator;
481
482 /*
483 * Calculate this BDI's share of the dirty ratio.
484 */
485 bdi_writeout_fraction(bdi, &numerator, &denominator);
486
487 bdi_dirty = (dirty * (100 - bdi_min_ratio)) / 100;
488 bdi_dirty *= numerator;
489 do_div(bdi_dirty, denominator);
490
491 bdi_dirty += (dirty * bdi->min_ratio) / 100;
492 if (bdi_dirty > (dirty * bdi->max_ratio) / 100)
493 bdi_dirty = dirty * bdi->max_ratio / 100;
494
495 return bdi_dirty;
496}
497
498static void bdi_update_write_bandwidth(struct backing_dev_info *bdi,
499 unsigned long elapsed,
500 unsigned long written)
501{
502 const unsigned long period = roundup_pow_of_two(3 * HZ);
503 unsigned long avg = bdi->avg_write_bandwidth;
504 unsigned long old = bdi->write_bandwidth;
505 u64 bw;
506
507 /*
508 * bw = written * HZ / elapsed
509 *
510 * bw * elapsed + write_bandwidth * (period - elapsed)
511 * write_bandwidth = ---------------------------------------------------
512 * period
513 */
514 bw = written - bdi->written_stamp;
515 bw *= HZ;
516 if (unlikely(elapsed > period)) {
517 do_div(bw, elapsed);
518 avg = bw;
519 goto out;
520 }
521 bw += (u64)bdi->write_bandwidth * (period - elapsed);
522 bw >>= ilog2(period);
523
524 /*
525 * one more level of smoothing, for filtering out sudden spikes
526 */
527 if (avg > old && old >= (unsigned long)bw)
528 avg -= (avg - old) >> 3;
529
530 if (avg < old && old <= (unsigned long)bw)
531 avg += (old - avg) >> 3;
532
533out:
534 bdi->write_bandwidth = bw;
535 bdi->avg_write_bandwidth = avg;
536}
537
538/*
539 * The global dirtyable memory and dirty threshold could be suddenly knocked
540 * down by a large amount (eg. on the startup of KVM in a swapless system).
541 * This may throw the system into deep dirty exceeded state and throttle
542 * heavy/light dirtiers alike. To retain good responsiveness, maintain
543 * global_dirty_limit for tracking slowly down to the knocked down dirty
544 * threshold.
545 */
546static void update_dirty_limit(unsigned long thresh, unsigned long dirty)
547{
548 unsigned long limit = global_dirty_limit;
549
550 /*
551 * Follow up in one step.
552 */
553 if (limit < thresh) {
554 limit = thresh;
555 goto update;
556 }
557
558 /*
559 * Follow down slowly. Use the higher one as the target, because thresh
560 * may drop below dirty. This is exactly the reason to introduce
561 * global_dirty_limit which is guaranteed to lie above the dirty pages.
562 */
563 thresh = max(thresh, dirty);
564 if (limit > thresh) {
565 limit -= (limit - thresh) >> 5;
566 goto update;
567 }
568 return;
569update:
570 global_dirty_limit = limit;
571}
572
573static void global_update_bandwidth(unsigned long thresh,
574 unsigned long dirty,
575 unsigned long now)
576{
577 static DEFINE_SPINLOCK(dirty_lock);
578 static unsigned long update_time;
579
580 /*
581 * check locklessly first to optimize away locking for the most time
582 */
583 if (time_before(now, update_time + BANDWIDTH_INTERVAL))
584 return;
585
586 spin_lock(&dirty_lock);
587 if (time_after_eq(now, update_time + BANDWIDTH_INTERVAL)) {
588 update_dirty_limit(thresh, dirty);
589 update_time = now;
590 }
591 spin_unlock(&dirty_lock);
592}
593
594void __bdi_update_bandwidth(struct backing_dev_info *bdi,
595 unsigned long thresh,
596 unsigned long dirty,
597 unsigned long bdi_thresh,
598 unsigned long bdi_dirty,
599 unsigned long start_time)
600{
601 unsigned long now = jiffies;
602 unsigned long elapsed = now - bdi->bw_time_stamp;
603 unsigned long written;
604
605 /*
606 * rate-limit, only update once every 200ms.
607 */
608 if (elapsed < BANDWIDTH_INTERVAL)
609 return;
610
611 written = percpu_counter_read(&bdi->bdi_stat[BDI_WRITTEN]);
612
613 /*
614 * Skip quiet periods when disk bandwidth is under-utilized.
615 * (at least 1s idle time between two flusher runs)
616 */
617 if (elapsed > HZ && time_before(bdi->bw_time_stamp, start_time))
618 goto snapshot;
619
620 if (thresh)
621 global_update_bandwidth(thresh, dirty, now);
622
623 bdi_update_write_bandwidth(bdi, elapsed, written);
624
625snapshot:
626 bdi->written_stamp = written;
627 bdi->bw_time_stamp = now;
628}
629
630static void bdi_update_bandwidth(struct backing_dev_info *bdi,
631 unsigned long thresh,
632 unsigned long dirty,
633 unsigned long bdi_thresh,
634 unsigned long bdi_dirty,
635 unsigned long start_time)
636{
637 if (time_is_after_eq_jiffies(bdi->bw_time_stamp + BANDWIDTH_INTERVAL))
638 return;
639 spin_lock(&bdi->wb.list_lock);
640 __bdi_update_bandwidth(bdi, thresh, dirty, bdi_thresh, bdi_dirty,
641 start_time);
642 spin_unlock(&bdi->wb.list_lock);
643}
644
645/*
646 * balance_dirty_pages() must be called by processes which are generating dirty
647 * data. It looks at the number of dirty pages in the machine and will force
648 * the caller to perform writeback if the system is over `vm_dirty_ratio'.
649 * If we're over `background_thresh' then the writeback threads are woken to
650 * perform some writeout.
651 */
652static void balance_dirty_pages(struct address_space *mapping,
653 unsigned long write_chunk)
654{
655 unsigned long nr_reclaimable, bdi_nr_reclaimable;
656 unsigned long nr_dirty; /* = file_dirty + writeback + unstable_nfs */
657 unsigned long bdi_dirty;
658 unsigned long background_thresh;
659 unsigned long dirty_thresh;
660 unsigned long bdi_thresh;
661 unsigned long task_bdi_thresh;
662 unsigned long min_task_bdi_thresh;
663 unsigned long pages_written = 0;
664 unsigned long pause = 1;
665 bool dirty_exceeded = false;
666 bool clear_dirty_exceeded = true;
667 struct backing_dev_info *bdi = mapping->backing_dev_info;
668 unsigned long start_time = jiffies;
669
670 for (;;) {
671 nr_reclaimable = global_page_state(NR_FILE_DIRTY) +
672 global_page_state(NR_UNSTABLE_NFS);
673 nr_dirty = nr_reclaimable + global_page_state(NR_WRITEBACK);
674
675 global_dirty_limits(&background_thresh, &dirty_thresh);
676
677 /*
678 * Throttle it only when the background writeback cannot
679 * catch-up. This avoids (excessively) small writeouts
680 * when the bdi limits are ramping up.
681 */
682 if (nr_dirty <= (background_thresh + dirty_thresh) / 2)
683 break;
684
685 bdi_thresh = bdi_dirty_limit(bdi, dirty_thresh);
686 min_task_bdi_thresh = task_min_dirty_limit(bdi_thresh);
687 task_bdi_thresh = task_dirty_limit(current, bdi_thresh);
688
689 /*
690 * In order to avoid the stacked BDI deadlock we need
691 * to ensure we accurately count the 'dirty' pages when
692 * the threshold is low.
693 *
694 * Otherwise it would be possible to get thresh+n pages
695 * reported dirty, even though there are thresh-m pages
696 * actually dirty; with m+n sitting in the percpu
697 * deltas.
698 */
699 if (task_bdi_thresh < 2 * bdi_stat_error(bdi)) {
700 bdi_nr_reclaimable = bdi_stat_sum(bdi, BDI_RECLAIMABLE);
701 bdi_dirty = bdi_nr_reclaimable +
702 bdi_stat_sum(bdi, BDI_WRITEBACK);
703 } else {
704 bdi_nr_reclaimable = bdi_stat(bdi, BDI_RECLAIMABLE);
705 bdi_dirty = bdi_nr_reclaimable +
706 bdi_stat(bdi, BDI_WRITEBACK);
707 }
708
709 /*
710 * The bdi thresh is somehow "soft" limit derived from the
711 * global "hard" limit. The former helps to prevent heavy IO
712 * bdi or process from holding back light ones; The latter is
713 * the last resort safeguard.
714 */
715 dirty_exceeded = (bdi_dirty > task_bdi_thresh) ||
716 (nr_dirty > dirty_thresh);
717 clear_dirty_exceeded = (bdi_dirty <= min_task_bdi_thresh) &&
718 (nr_dirty <= dirty_thresh);
719
720 if (!dirty_exceeded)
721 break;
722
723 if (!bdi->dirty_exceeded)
724 bdi->dirty_exceeded = 1;
725
726 bdi_update_bandwidth(bdi, dirty_thresh, nr_dirty,
727 bdi_thresh, bdi_dirty, start_time);
728
729 /* Note: nr_reclaimable denotes nr_dirty + nr_unstable.
730 * Unstable writes are a feature of certain networked
731 * filesystems (i.e. NFS) in which data may have been
732 * written to the server's write cache, but has not yet
733 * been flushed to permanent storage.
734 * Only move pages to writeback if this bdi is over its
735 * threshold otherwise wait until the disk writes catch
736 * up.
737 */
738 trace_balance_dirty_start(bdi);
739 if (bdi_nr_reclaimable > task_bdi_thresh) {
740 pages_written += writeback_inodes_wb(&bdi->wb,
741 write_chunk);
742 trace_balance_dirty_written(bdi, pages_written);
743 if (pages_written >= write_chunk)
744 break; /* We've done our duty */
745 }
746 __set_current_state(TASK_UNINTERRUPTIBLE);
747 io_schedule_timeout(pause);
748 trace_balance_dirty_wait(bdi);
749
750 dirty_thresh = hard_dirty_limit(dirty_thresh);
751 /*
752 * max-pause area. If dirty exceeded but still within this
753 * area, no need to sleep for more than 200ms: (a) 8 pages per
754 * 200ms is typically more than enough to curb heavy dirtiers;
755 * (b) the pause time limit makes the dirtiers more responsive.
756 */
757 if (nr_dirty < dirty_thresh &&
758 bdi_dirty < (task_bdi_thresh + bdi_thresh) / 2 &&
759 time_after(jiffies, start_time + MAX_PAUSE))
760 break;
761
762 /*
763 * Increase the delay for each loop, up to our previous
764 * default of taking a 100ms nap.
765 */
766 pause <<= 1;
767 if (pause > HZ / 10)
768 pause = HZ / 10;
769 }
770
771 /* Clear dirty_exceeded flag only when no task can exceed the limit */
772 if (clear_dirty_exceeded && bdi->dirty_exceeded)
773 bdi->dirty_exceeded = 0;
774
775 if (writeback_in_progress(bdi))
776 return;
777
778 /*
779 * In laptop mode, we wait until hitting the higher threshold before
780 * starting background writeout, and then write out all the way down
781 * to the lower threshold. So slow writers cause minimal disk activity.
782 *
783 * In normal mode, we start background writeout at the lower
784 * background_thresh, to keep the amount of dirty memory low.
785 */
786 if ((laptop_mode && pages_written) ||
787 (!laptop_mode && (nr_reclaimable > background_thresh)))
788 bdi_start_background_writeback(bdi);
789}
790
791void set_page_dirty_balance(struct page *page, int page_mkwrite)
792{
793 if (set_page_dirty(page) || page_mkwrite) {
794 struct address_space *mapping = page_mapping(page);
795
796 if (mapping)
797 balance_dirty_pages_ratelimited(mapping);
798 }
799}
800
801static DEFINE_PER_CPU(unsigned long, bdp_ratelimits) = 0;
802
803/**
804 * balance_dirty_pages_ratelimited_nr - balance dirty memory state
805 * @mapping: address_space which was dirtied
806 * @nr_pages_dirtied: number of pages which the caller has just dirtied
807 *
808 * Processes which are dirtying memory should call in here once for each page
809 * which was newly dirtied. The function will periodically check the system's
810 * dirty state and will initiate writeback if needed.
811 *
812 * On really big machines, get_writeback_state is expensive, so try to avoid
813 * calling it too often (ratelimiting). But once we're over the dirty memory
814 * limit we decrease the ratelimiting by a lot, to prevent individual processes
815 * from overshooting the limit by (ratelimit_pages) each.
816 */
817void balance_dirty_pages_ratelimited_nr(struct address_space *mapping,
818 unsigned long nr_pages_dirtied)
819{
820 struct backing_dev_info *bdi = mapping->backing_dev_info;
821 unsigned long ratelimit;
822 unsigned long *p;
823
824 if (!bdi_cap_account_dirty(bdi))
825 return;
826
827 ratelimit = ratelimit_pages;
828 if (mapping->backing_dev_info->dirty_exceeded)
829 ratelimit = 8;
830
831 /*
832 * Check the rate limiting. Also, we do not want to throttle real-time
833 * tasks in balance_dirty_pages(). Period.
834 */
835 preempt_disable();
836 p = &__get_cpu_var(bdp_ratelimits);
837 *p += nr_pages_dirtied;
838 if (unlikely(*p >= ratelimit)) {
839 ratelimit = sync_writeback_pages(*p);
840 *p = 0;
841 preempt_enable();
842 balance_dirty_pages(mapping, ratelimit);
843 return;
844 }
845 preempt_enable();
846}
847EXPORT_SYMBOL(balance_dirty_pages_ratelimited_nr);
848
849void throttle_vm_writeout(gfp_t gfp_mask)
850{
851 unsigned long background_thresh;
852 unsigned long dirty_thresh;
853
854 for ( ; ; ) {
855 global_dirty_limits(&background_thresh, &dirty_thresh);
856
857 /*
858 * Boost the allowable dirty threshold a bit for page
859 * allocators so they don't get DoS'ed by heavy writers
860 */
861 dirty_thresh += dirty_thresh / 10; /* wheeee... */
862
863 if (global_page_state(NR_UNSTABLE_NFS) +
864 global_page_state(NR_WRITEBACK) <= dirty_thresh)
865 break;
866 congestion_wait(BLK_RW_ASYNC, HZ/10);
867
868 /*
869 * The caller might hold locks which can prevent IO completion
870 * or progress in the filesystem. So we cannot just sit here
871 * waiting for IO to complete.
872 */
873 if ((gfp_mask & (__GFP_FS|__GFP_IO)) != (__GFP_FS|__GFP_IO))
874 break;
875 }
876}
877
878/*
879 * sysctl handler for /proc/sys/vm/dirty_writeback_centisecs
880 */
881int dirty_writeback_centisecs_handler(ctl_table *table, int write,
882 void __user *buffer, size_t *length, loff_t *ppos)
883{
884 proc_dointvec(table, write, buffer, length, ppos);
885 bdi_arm_supers_timer();
886 return 0;
887}
888
889#ifdef CONFIG_BLOCK
890void laptop_mode_timer_fn(unsigned long data)
891{
892 struct request_queue *q = (struct request_queue *)data;
893 int nr_pages = global_page_state(NR_FILE_DIRTY) +
894 global_page_state(NR_UNSTABLE_NFS);
895
896 /*
897 * We want to write everything out, not just down to the dirty
898 * threshold
899 */
900 if (bdi_has_dirty_io(&q->backing_dev_info))
901 bdi_start_writeback(&q->backing_dev_info, nr_pages);
902}
903
904/*
905 * We've spun up the disk and we're in laptop mode: schedule writeback
906 * of all dirty data a few seconds from now. If the flush is already scheduled
907 * then push it back - the user is still using the disk.
908 */
909void laptop_io_completion(struct backing_dev_info *info)
910{
911 mod_timer(&info->laptop_mode_wb_timer, jiffies + laptop_mode);
912}
913
914/*
915 * We're in laptop mode and we've just synced. The sync's writes will have
916 * caused another writeback to be scheduled by laptop_io_completion.
917 * Nothing needs to be written back anymore, so we unschedule the writeback.
918 */
919void laptop_sync_completion(void)
920{
921 struct backing_dev_info *bdi;
922
923 rcu_read_lock();
924
925 list_for_each_entry_rcu(bdi, &bdi_list, bdi_list)
926 del_timer(&bdi->laptop_mode_wb_timer);
927
928 rcu_read_unlock();
929}
930#endif
931
932/*
933 * If ratelimit_pages is too high then we can get into dirty-data overload
934 * if a large number of processes all perform writes at the same time.
935 * If it is too low then SMP machines will call the (expensive)
936 * get_writeback_state too often.
937 *
938 * Here we set ratelimit_pages to a level which ensures that when all CPUs are
939 * dirtying in parallel, we cannot go more than 3% (1/32) over the dirty memory
940 * thresholds before writeback cuts in.
941 *
942 * But the limit should not be set too high. Because it also controls the
943 * amount of memory which the balance_dirty_pages() caller has to write back.
944 * If this is too large then the caller will block on the IO queue all the
945 * time. So limit it to four megabytes - the balance_dirty_pages() caller
946 * will write six megabyte chunks, max.
947 */
948
949void writeback_set_ratelimit(void)
950{
951 ratelimit_pages = vm_total_pages / (num_online_cpus() * 32);
952 if (ratelimit_pages < 16)
953 ratelimit_pages = 16;
954 if (ratelimit_pages * PAGE_CACHE_SIZE > 4096 * 1024)
955 ratelimit_pages = (4096 * 1024) / PAGE_CACHE_SIZE;
956}
957
958static int __cpuinit
959ratelimit_handler(struct notifier_block *self, unsigned long u, void *v)
960{
961 writeback_set_ratelimit();
962 return NOTIFY_DONE;
963}
964
965static struct notifier_block __cpuinitdata ratelimit_nb = {
966 .notifier_call = ratelimit_handler,
967 .next = NULL,
968};
969
970/*
971 * Called early on to tune the page writeback dirty limits.
972 *
973 * We used to scale dirty pages according to how total memory
974 * related to pages that could be allocated for buffers (by
975 * comparing nr_free_buffer_pages() to vm_total_pages.
976 *
977 * However, that was when we used "dirty_ratio" to scale with
978 * all memory, and we don't do that any more. "dirty_ratio"
979 * is now applied to total non-HIGHPAGE memory (by subtracting
980 * totalhigh_pages from vm_total_pages), and as such we can't
981 * get into the old insane situation any more where we had
982 * large amounts of dirty pages compared to a small amount of
983 * non-HIGHMEM memory.
984 *
985 * But we might still want to scale the dirty_ratio by how
986 * much memory the box has..
987 */
988void __init page_writeback_init(void)
989{
990 int shift;
991
992 writeback_set_ratelimit();
993 register_cpu_notifier(&ratelimit_nb);
994
995 shift = calc_period_shift();
996 prop_descriptor_init(&vm_completions, shift);
997 prop_descriptor_init(&vm_dirties, shift);
998}
999
1000/**
1001 * tag_pages_for_writeback - tag pages to be written by write_cache_pages
1002 * @mapping: address space structure to write
1003 * @start: starting page index
1004 * @end: ending page index (inclusive)
1005 *
1006 * This function scans the page range from @start to @end (inclusive) and tags
1007 * all pages that have DIRTY tag set with a special TOWRITE tag. The idea is
1008 * that write_cache_pages (or whoever calls this function) will then use
1009 * TOWRITE tag to identify pages eligible for writeback. This mechanism is
1010 * used to avoid livelocking of writeback by a process steadily creating new
1011 * dirty pages in the file (thus it is important for this function to be quick
1012 * so that it can tag pages faster than a dirtying process can create them).
1013 */
1014/*
1015 * We tag pages in batches of WRITEBACK_TAG_BATCH to reduce tree_lock latency.
1016 */
1017void tag_pages_for_writeback(struct address_space *mapping,
1018 pgoff_t start, pgoff_t end)
1019{
1020#define WRITEBACK_TAG_BATCH 4096
1021 unsigned long tagged;
1022
1023 do {
1024 spin_lock_irq(&mapping->tree_lock);
1025 tagged = radix_tree_range_tag_if_tagged(&mapping->page_tree,
1026 &start, end, WRITEBACK_TAG_BATCH,
1027 PAGECACHE_TAG_DIRTY, PAGECACHE_TAG_TOWRITE);
1028 spin_unlock_irq(&mapping->tree_lock);
1029 WARN_ON_ONCE(tagged > WRITEBACK_TAG_BATCH);
1030 cond_resched();
1031 /* We check 'start' to handle wrapping when end == ~0UL */
1032 } while (tagged >= WRITEBACK_TAG_BATCH && start);
1033}
1034EXPORT_SYMBOL(tag_pages_for_writeback);
1035
1036/**
1037 * write_cache_pages - walk the list of dirty pages of the given address space and write all of them.
1038 * @mapping: address space structure to write
1039 * @wbc: subtract the number of written pages from *@wbc->nr_to_write
1040 * @writepage: function called for each page
1041 * @data: data passed to writepage function
1042 *
1043 * If a page is already under I/O, write_cache_pages() skips it, even
1044 * if it's dirty. This is desirable behaviour for memory-cleaning writeback,
1045 * but it is INCORRECT for data-integrity system calls such as fsync(). fsync()
1046 * and msync() need to guarantee that all the data which was dirty at the time
1047 * the call was made get new I/O started against them. If wbc->sync_mode is
1048 * WB_SYNC_ALL then we were called for data integrity and we must wait for
1049 * existing IO to complete.
1050 *
1051 * To avoid livelocks (when other process dirties new pages), we first tag
1052 * pages which should be written back with TOWRITE tag and only then start
1053 * writing them. For data-integrity sync we have to be careful so that we do
1054 * not miss some pages (e.g., because some other process has cleared TOWRITE
1055 * tag we set). The rule we follow is that TOWRITE tag can be cleared only
1056 * by the process clearing the DIRTY tag (and submitting the page for IO).
1057 */
1058int write_cache_pages(struct address_space *mapping,
1059 struct writeback_control *wbc, writepage_t writepage,
1060 void *data)
1061{
1062 int ret = 0;
1063 int done = 0;
1064 struct pagevec pvec;
1065 int nr_pages;
1066 pgoff_t uninitialized_var(writeback_index);
1067 pgoff_t index;
1068 pgoff_t end; /* Inclusive */
1069 pgoff_t done_index;
1070 int cycled;
1071 int range_whole = 0;
1072 int tag;
1073
1074 pagevec_init(&pvec, 0);
1075 if (wbc->range_cyclic) {
1076 writeback_index = mapping->writeback_index; /* prev offset */
1077 index = writeback_index;
1078 if (index == 0)
1079 cycled = 1;
1080 else
1081 cycled = 0;
1082 end = -1;
1083 } else {
1084 index = wbc->range_start >> PAGE_CACHE_SHIFT;
1085 end = wbc->range_end >> PAGE_CACHE_SHIFT;
1086 if (wbc->range_start == 0 && wbc->range_end == LLONG_MAX)
1087 range_whole = 1;
1088 cycled = 1; /* ignore range_cyclic tests */
1089 }
1090 if (wbc->sync_mode == WB_SYNC_ALL || wbc->tagged_writepages)
1091 tag = PAGECACHE_TAG_TOWRITE;
1092 else
1093 tag = PAGECACHE_TAG_DIRTY;
1094retry:
1095 if (wbc->sync_mode == WB_SYNC_ALL || wbc->tagged_writepages)
1096 tag_pages_for_writeback(mapping, index, end);
1097 done_index = index;
1098 while (!done && (index <= end)) {
1099 int i;
1100
1101 nr_pages = pagevec_lookup_tag(&pvec, mapping, &index, tag,
1102 min(end - index, (pgoff_t)PAGEVEC_SIZE-1) + 1);
1103 if (nr_pages == 0)
1104 break;
1105
1106 for (i = 0; i < nr_pages; i++) {
1107 struct page *page = pvec.pages[i];
1108
1109 /*
1110 * At this point, the page may be truncated or
1111 * invalidated (changing page->mapping to NULL), or
1112 * even swizzled back from swapper_space to tmpfs file
1113 * mapping. However, page->index will not change
1114 * because we have a reference on the page.
1115 */
1116 if (page->index > end) {
1117 /*
1118 * can't be range_cyclic (1st pass) because
1119 * end == -1 in that case.
1120 */
1121 done = 1;
1122 break;
1123 }
1124
1125 done_index = page->index;
1126
1127 lock_page(page);
1128
1129 /*
1130 * Page truncated or invalidated. We can freely skip it
1131 * then, even for data integrity operations: the page
1132 * has disappeared concurrently, so there could be no
1133 * real expectation of this data interity operation
1134 * even if there is now a new, dirty page at the same
1135 * pagecache address.
1136 */
1137 if (unlikely(page->mapping != mapping)) {
1138continue_unlock:
1139 unlock_page(page);
1140 continue;
1141 }
1142
1143 if (!PageDirty(page)) {
1144 /* someone wrote it for us */
1145 goto continue_unlock;
1146 }
1147
1148 if (PageWriteback(page)) {
1149 if (wbc->sync_mode != WB_SYNC_NONE)
1150 wait_on_page_writeback(page);
1151 else
1152 goto continue_unlock;
1153 }
1154
1155 BUG_ON(PageWriteback(page));
1156 if (!clear_page_dirty_for_io(page))
1157 goto continue_unlock;
1158
1159 trace_wbc_writepage(wbc, mapping->backing_dev_info);
1160 ret = (*writepage)(page, wbc, data);
1161 if (unlikely(ret)) {
1162 if (ret == AOP_WRITEPAGE_ACTIVATE) {
1163 unlock_page(page);
1164 ret = 0;
1165 } else {
1166 /*
1167 * done_index is set past this page,
1168 * so media errors will not choke
1169 * background writeout for the entire
1170 * file. This has consequences for
1171 * range_cyclic semantics (ie. it may
1172 * not be suitable for data integrity
1173 * writeout).
1174 */
1175 done_index = page->index + 1;
1176 done = 1;
1177 break;
1178 }
1179 }
1180
1181 /*
1182 * We stop writing back only if we are not doing
1183 * integrity sync. In case of integrity sync we have to
1184 * keep going until we have written all the pages
1185 * we tagged for writeback prior to entering this loop.
1186 */
1187 if (--wbc->nr_to_write <= 0 &&
1188 wbc->sync_mode == WB_SYNC_NONE) {
1189 done = 1;
1190 break;
1191 }
1192 }
1193 pagevec_release(&pvec);
1194 cond_resched();
1195 }
1196 if (!cycled && !done) {
1197 /*
1198 * range_cyclic:
1199 * We hit the last page and there is more work to be done: wrap
1200 * back to the start of the file
1201 */
1202 cycled = 1;
1203 index = 0;
1204 end = writeback_index - 1;
1205 goto retry;
1206 }
1207 if (wbc->range_cyclic || (range_whole && wbc->nr_to_write > 0))
1208 mapping->writeback_index = done_index;
1209
1210 return ret;
1211}
1212EXPORT_SYMBOL(write_cache_pages);
1213
1214/*
1215 * Function used by generic_writepages to call the real writepage
1216 * function and set the mapping flags on error
1217 */
1218static int __writepage(struct page *page, struct writeback_control *wbc,
1219 void *data)
1220{
1221 struct address_space *mapping = data;
1222 int ret = mapping->a_ops->writepage(page, wbc);
1223 mapping_set_error(mapping, ret);
1224 return ret;
1225}
1226
1227/**
1228 * generic_writepages - walk the list of dirty pages of the given address space and writepage() all of them.
1229 * @mapping: address space structure to write
1230 * @wbc: subtract the number of written pages from *@wbc->nr_to_write
1231 *
1232 * This is a library function, which implements the writepages()
1233 * address_space_operation.
1234 */
1235int generic_writepages(struct address_space *mapping,
1236 struct writeback_control *wbc)
1237{
1238 struct blk_plug plug;
1239 int ret;
1240
1241 /* deal with chardevs and other special file */
1242 if (!mapping->a_ops->writepage)
1243 return 0;
1244
1245 blk_start_plug(&plug);
1246 ret = write_cache_pages(mapping, wbc, __writepage, mapping);
1247 blk_finish_plug(&plug);
1248 return ret;
1249}
1250
1251EXPORT_SYMBOL(generic_writepages);
1252
1253int do_writepages(struct address_space *mapping, struct writeback_control *wbc)
1254{
1255 int ret;
1256
1257 if (wbc->nr_to_write <= 0)
1258 return 0;
1259 if (mapping->a_ops->writepages)
1260 ret = mapping->a_ops->writepages(mapping, wbc);
1261 else
1262 ret = generic_writepages(mapping, wbc);
1263 return ret;
1264}
1265
1266/**
1267 * write_one_page - write out a single page and optionally wait on I/O
1268 * @page: the page to write
1269 * @wait: if true, wait on writeout
1270 *
1271 * The page must be locked by the caller and will be unlocked upon return.
1272 *
1273 * write_one_page() returns a negative error code if I/O failed.
1274 */
1275int write_one_page(struct page *page, int wait)
1276{
1277 struct address_space *mapping = page->mapping;
1278 int ret = 0;
1279 struct writeback_control wbc = {
1280 .sync_mode = WB_SYNC_ALL,
1281 .nr_to_write = 1,
1282 };
1283
1284 BUG_ON(!PageLocked(page));
1285
1286 if (wait)
1287 wait_on_page_writeback(page);
1288
1289 if (clear_page_dirty_for_io(page)) {
1290 page_cache_get(page);
1291 ret = mapping->a_ops->writepage(page, &wbc);
1292 if (ret == 0 && wait) {
1293 wait_on_page_writeback(page);
1294 if (PageError(page))
1295 ret = -EIO;
1296 }
1297 page_cache_release(page);
1298 } else {
1299 unlock_page(page);
1300 }
1301 return ret;
1302}
1303EXPORT_SYMBOL(write_one_page);
1304
1305/*
1306 * For address_spaces which do not use buffers nor write back.
1307 */
1308int __set_page_dirty_no_writeback(struct page *page)
1309{
1310 if (!PageDirty(page))
1311 return !TestSetPageDirty(page);
1312 return 0;
1313}
1314
1315/*
1316 * Helper function for set_page_dirty family.
1317 * NOTE: This relies on being atomic wrt interrupts.
1318 */
1319void account_page_dirtied(struct page *page, struct address_space *mapping)
1320{
1321 if (mapping_cap_account_dirty(mapping)) {
1322 __inc_zone_page_state(page, NR_FILE_DIRTY);
1323 __inc_zone_page_state(page, NR_DIRTIED);
1324 __inc_bdi_stat(mapping->backing_dev_info, BDI_RECLAIMABLE);
1325 task_dirty_inc(current);
1326 task_io_account_write(PAGE_CACHE_SIZE);
1327 }
1328}
1329EXPORT_SYMBOL(account_page_dirtied);
1330
1331/*
1332 * Helper function for set_page_writeback family.
1333 * NOTE: Unlike account_page_dirtied this does not rely on being atomic
1334 * wrt interrupts.
1335 */
1336void account_page_writeback(struct page *page)
1337{
1338 inc_zone_page_state(page, NR_WRITEBACK);
1339}
1340EXPORT_SYMBOL(account_page_writeback);
1341
1342/*
1343 * For address_spaces which do not use buffers. Just tag the page as dirty in
1344 * its radix tree.
1345 *
1346 * This is also used when a single buffer is being dirtied: we want to set the
1347 * page dirty in that case, but not all the buffers. This is a "bottom-up"
1348 * dirtying, whereas __set_page_dirty_buffers() is a "top-down" dirtying.
1349 *
1350 * Most callers have locked the page, which pins the address_space in memory.
1351 * But zap_pte_range() does not lock the page, however in that case the
1352 * mapping is pinned by the vma's ->vm_file reference.
1353 *
1354 * We take care to handle the case where the page was truncated from the
1355 * mapping by re-checking page_mapping() inside tree_lock.
1356 */
1357int __set_page_dirty_nobuffers(struct page *page)
1358{
1359 if (!TestSetPageDirty(page)) {
1360 struct address_space *mapping = page_mapping(page);
1361 struct address_space *mapping2;
1362
1363 if (!mapping)
1364 return 1;
1365
1366 spin_lock_irq(&mapping->tree_lock);
1367 mapping2 = page_mapping(page);
1368 if (mapping2) { /* Race with truncate? */
1369 BUG_ON(mapping2 != mapping);
1370 WARN_ON_ONCE(!PagePrivate(page) && !PageUptodate(page));
1371 account_page_dirtied(page, mapping);
1372 radix_tree_tag_set(&mapping->page_tree,
1373 page_index(page), PAGECACHE_TAG_DIRTY);
1374 }
1375 spin_unlock_irq(&mapping->tree_lock);
1376 if (mapping->host) {
1377 /* !PageAnon && !swapper_space */
1378 __mark_inode_dirty(mapping->host, I_DIRTY_PAGES);
1379 }
1380 return 1;
1381 }
1382 return 0;
1383}
1384EXPORT_SYMBOL(__set_page_dirty_nobuffers);
1385
1386/*
1387 * When a writepage implementation decides that it doesn't want to write this
1388 * page for some reason, it should redirty the locked page via
1389 * redirty_page_for_writepage() and it should then unlock the page and return 0
1390 */
1391int redirty_page_for_writepage(struct writeback_control *wbc, struct page *page)
1392{
1393 wbc->pages_skipped++;
1394 return __set_page_dirty_nobuffers(page);
1395}
1396EXPORT_SYMBOL(redirty_page_for_writepage);
1397
1398/*
1399 * Dirty a page.
1400 *
1401 * For pages with a mapping this should be done under the page lock
1402 * for the benefit of asynchronous memory errors who prefer a consistent
1403 * dirty state. This rule can be broken in some special cases,
1404 * but should be better not to.
1405 *
1406 * If the mapping doesn't provide a set_page_dirty a_op, then
1407 * just fall through and assume that it wants buffer_heads.
1408 */
1409int set_page_dirty(struct page *page)
1410{
1411 struct address_space *mapping = page_mapping(page);
1412
1413 if (likely(mapping)) {
1414 int (*spd)(struct page *) = mapping->a_ops->set_page_dirty;
1415 /*
1416 * readahead/lru_deactivate_page could remain
1417 * PG_readahead/PG_reclaim due to race with end_page_writeback
1418 * About readahead, if the page is written, the flags would be
1419 * reset. So no problem.
1420 * About lru_deactivate_page, if the page is redirty, the flag
1421 * will be reset. So no problem. but if the page is used by readahead
1422 * it will confuse readahead and make it restart the size rampup
1423 * process. But it's a trivial problem.
1424 */
1425 ClearPageReclaim(page);
1426#ifdef CONFIG_BLOCK
1427 if (!spd)
1428 spd = __set_page_dirty_buffers;
1429#endif
1430 return (*spd)(page);
1431 }
1432 if (!PageDirty(page)) {
1433 if (!TestSetPageDirty(page))
1434 return 1;
1435 }
1436 return 0;
1437}
1438EXPORT_SYMBOL(set_page_dirty);
1439
1440/*
1441 * set_page_dirty() is racy if the caller has no reference against
1442 * page->mapping->host, and if the page is unlocked. This is because another
1443 * CPU could truncate the page off the mapping and then free the mapping.
1444 *
1445 * Usually, the page _is_ locked, or the caller is a user-space process which
1446 * holds a reference on the inode by having an open file.
1447 *
1448 * In other cases, the page should be locked before running set_page_dirty().
1449 */
1450int set_page_dirty_lock(struct page *page)
1451{
1452 int ret;
1453
1454 lock_page(page);
1455 ret = set_page_dirty(page);
1456 unlock_page(page);
1457 return ret;
1458}
1459EXPORT_SYMBOL(set_page_dirty_lock);
1460
1461/*
1462 * Clear a page's dirty flag, while caring for dirty memory accounting.
1463 * Returns true if the page was previously dirty.
1464 *
1465 * This is for preparing to put the page under writeout. We leave the page
1466 * tagged as dirty in the radix tree so that a concurrent write-for-sync
1467 * can discover it via a PAGECACHE_TAG_DIRTY walk. The ->writepage
1468 * implementation will run either set_page_writeback() or set_page_dirty(),
1469 * at which stage we bring the page's dirty flag and radix-tree dirty tag
1470 * back into sync.
1471 *
1472 * This incoherency between the page's dirty flag and radix-tree tag is
1473 * unfortunate, but it only exists while the page is locked.
1474 */
1475int clear_page_dirty_for_io(struct page *page)
1476{
1477 struct address_space *mapping = page_mapping(page);
1478
1479 BUG_ON(!PageLocked(page));
1480
1481 if (mapping && mapping_cap_account_dirty(mapping)) {
1482 /*
1483 * Yes, Virginia, this is indeed insane.
1484 *
1485 * We use this sequence to make sure that
1486 * (a) we account for dirty stats properly
1487 * (b) we tell the low-level filesystem to
1488 * mark the whole page dirty if it was
1489 * dirty in a pagetable. Only to then
1490 * (c) clean the page again and return 1 to
1491 * cause the writeback.
1492 *
1493 * This way we avoid all nasty races with the
1494 * dirty bit in multiple places and clearing
1495 * them concurrently from different threads.
1496 *
1497 * Note! Normally the "set_page_dirty(page)"
1498 * has no effect on the actual dirty bit - since
1499 * that will already usually be set. But we
1500 * need the side effects, and it can help us
1501 * avoid races.
1502 *
1503 * We basically use the page "master dirty bit"
1504 * as a serialization point for all the different
1505 * threads doing their things.
1506 */
1507 if (page_mkclean(page))
1508 set_page_dirty(page);
1509 /*
1510 * We carefully synchronise fault handlers against
1511 * installing a dirty pte and marking the page dirty
1512 * at this point. We do this by having them hold the
1513 * page lock at some point after installing their
1514 * pte, but before marking the page dirty.
1515 * Pages are always locked coming in here, so we get
1516 * the desired exclusion. See mm/memory.c:do_wp_page()
1517 * for more comments.
1518 */
1519 if (TestClearPageDirty(page)) {
1520 dec_zone_page_state(page, NR_FILE_DIRTY);
1521 dec_bdi_stat(mapping->backing_dev_info,
1522 BDI_RECLAIMABLE);
1523 return 1;
1524 }
1525 return 0;
1526 }
1527 return TestClearPageDirty(page);
1528}
1529EXPORT_SYMBOL(clear_page_dirty_for_io);
1530
1531int test_clear_page_writeback(struct page *page)
1532{
1533 struct address_space *mapping = page_mapping(page);
1534 int ret;
1535
1536 if (mapping) {
1537 struct backing_dev_info *bdi = mapping->backing_dev_info;
1538 unsigned long flags;
1539
1540 spin_lock_irqsave(&mapping->tree_lock, flags);
1541 ret = TestClearPageWriteback(page);
1542 if (ret) {
1543 radix_tree_tag_clear(&mapping->page_tree,
1544 page_index(page),
1545 PAGECACHE_TAG_WRITEBACK);
1546 if (bdi_cap_account_writeback(bdi)) {
1547 __dec_bdi_stat(bdi, BDI_WRITEBACK);
1548 __bdi_writeout_inc(bdi);
1549 }
1550 }
1551 spin_unlock_irqrestore(&mapping->tree_lock, flags);
1552 } else {
1553 ret = TestClearPageWriteback(page);
1554 }
1555 if (ret) {
1556 dec_zone_page_state(page, NR_WRITEBACK);
1557 inc_zone_page_state(page, NR_WRITTEN);
1558 }
1559 return ret;
1560}
1561
1562int test_set_page_writeback(struct page *page)
1563{
1564 struct address_space *mapping = page_mapping(page);
1565 int ret;
1566
1567 if (mapping) {
1568 struct backing_dev_info *bdi = mapping->backing_dev_info;
1569 unsigned long flags;
1570
1571 spin_lock_irqsave(&mapping->tree_lock, flags);
1572 ret = TestSetPageWriteback(page);
1573 if (!ret) {
1574 radix_tree_tag_set(&mapping->page_tree,
1575 page_index(page),
1576 PAGECACHE_TAG_WRITEBACK);
1577 if (bdi_cap_account_writeback(bdi))
1578 __inc_bdi_stat(bdi, BDI_WRITEBACK);
1579 }
1580 if (!PageDirty(page))
1581 radix_tree_tag_clear(&mapping->page_tree,
1582 page_index(page),
1583 PAGECACHE_TAG_DIRTY);
1584 radix_tree_tag_clear(&mapping->page_tree,
1585 page_index(page),
1586 PAGECACHE_TAG_TOWRITE);
1587 spin_unlock_irqrestore(&mapping->tree_lock, flags);
1588 } else {
1589 ret = TestSetPageWriteback(page);
1590 }
1591 if (!ret)
1592 account_page_writeback(page);
1593 return ret;
1594
1595}
1596EXPORT_SYMBOL(test_set_page_writeback);
1597
1598/*
1599 * Return true if any of the pages in the mapping are marked with the
1600 * passed tag.
1601 */
1602int mapping_tagged(struct address_space *mapping, int tag)
1603{
1604 return radix_tree_tagged(&mapping->page_tree, tag);
1605}
1606EXPORT_SYMBOL(mapping_tagged);