Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * uartlite.c: Serial driver for Xilinx uartlite serial controller
4 *
5 * Copyright (C) 2006 Peter Korsgaard <jacmet@sunsite.dk>
6 * Copyright (C) 2007 Secret Lab Technologies Ltd.
7 */
8
9#include <linux/platform_device.h>
10#include <linux/module.h>
11#include <linux/console.h>
12#include <linux/serial.h>
13#include <linux/serial_core.h>
14#include <linux/tty.h>
15#include <linux/tty_flip.h>
16#include <linux/delay.h>
17#include <linux/interrupt.h>
18#include <linux/init.h>
19#include <linux/io.h>
20#include <linux/of.h>
21#include <linux/of_address.h>
22#include <linux/of_device.h>
23#include <linux/of_platform.h>
24#include <linux/clk.h>
25
26#define ULITE_NAME "ttyUL"
27#define ULITE_MAJOR 204
28#define ULITE_MINOR 187
29#define ULITE_NR_UARTS CONFIG_SERIAL_UARTLITE_NR_UARTS
30
31/* ---------------------------------------------------------------------
32 * Register definitions
33 *
34 * For register details see datasheet:
35 * https://www.xilinx.com/support/documentation/ip_documentation/opb_uartlite.pdf
36 */
37
38#define ULITE_RX 0x00
39#define ULITE_TX 0x04
40#define ULITE_STATUS 0x08
41#define ULITE_CONTROL 0x0c
42
43#define ULITE_REGION 16
44
45#define ULITE_STATUS_RXVALID 0x01
46#define ULITE_STATUS_RXFULL 0x02
47#define ULITE_STATUS_TXEMPTY 0x04
48#define ULITE_STATUS_TXFULL 0x08
49#define ULITE_STATUS_IE 0x10
50#define ULITE_STATUS_OVERRUN 0x20
51#define ULITE_STATUS_FRAME 0x40
52#define ULITE_STATUS_PARITY 0x80
53
54#define ULITE_CONTROL_RST_TX 0x01
55#define ULITE_CONTROL_RST_RX 0x02
56#define ULITE_CONTROL_IE 0x10
57
58/* Static pointer to console port */
59#ifdef CONFIG_SERIAL_UARTLITE_CONSOLE
60static struct uart_port *console_port;
61#endif
62
63struct uartlite_data {
64 const struct uartlite_reg_ops *reg_ops;
65 struct clk *clk;
66};
67
68struct uartlite_reg_ops {
69 u32 (*in)(void __iomem *addr);
70 void (*out)(u32 val, void __iomem *addr);
71};
72
73static u32 uartlite_inbe32(void __iomem *addr)
74{
75 return ioread32be(addr);
76}
77
78static void uartlite_outbe32(u32 val, void __iomem *addr)
79{
80 iowrite32be(val, addr);
81}
82
83static const struct uartlite_reg_ops uartlite_be = {
84 .in = uartlite_inbe32,
85 .out = uartlite_outbe32,
86};
87
88static u32 uartlite_inle32(void __iomem *addr)
89{
90 return ioread32(addr);
91}
92
93static void uartlite_outle32(u32 val, void __iomem *addr)
94{
95 iowrite32(val, addr);
96}
97
98static const struct uartlite_reg_ops uartlite_le = {
99 .in = uartlite_inle32,
100 .out = uartlite_outle32,
101};
102
103static inline u32 uart_in32(u32 offset, struct uart_port *port)
104{
105 struct uartlite_data *pdata = port->private_data;
106
107 return pdata->reg_ops->in(port->membase + offset);
108}
109
110static inline void uart_out32(u32 val, u32 offset, struct uart_port *port)
111{
112 struct uartlite_data *pdata = port->private_data;
113
114 pdata->reg_ops->out(val, port->membase + offset);
115}
116
117static struct uart_port ulite_ports[ULITE_NR_UARTS];
118
119/* ---------------------------------------------------------------------
120 * Core UART driver operations
121 */
122
123static int ulite_receive(struct uart_port *port, int stat)
124{
125 struct tty_port *tport = &port->state->port;
126 unsigned char ch = 0;
127 char flag = TTY_NORMAL;
128
129 if ((stat & (ULITE_STATUS_RXVALID | ULITE_STATUS_OVERRUN
130 | ULITE_STATUS_FRAME)) == 0)
131 return 0;
132
133 /* stats */
134 if (stat & ULITE_STATUS_RXVALID) {
135 port->icount.rx++;
136 ch = uart_in32(ULITE_RX, port);
137
138 if (stat & ULITE_STATUS_PARITY)
139 port->icount.parity++;
140 }
141
142 if (stat & ULITE_STATUS_OVERRUN)
143 port->icount.overrun++;
144
145 if (stat & ULITE_STATUS_FRAME)
146 port->icount.frame++;
147
148
149 /* drop byte with parity error if IGNPAR specificed */
150 if (stat & port->ignore_status_mask & ULITE_STATUS_PARITY)
151 stat &= ~ULITE_STATUS_RXVALID;
152
153 stat &= port->read_status_mask;
154
155 if (stat & ULITE_STATUS_PARITY)
156 flag = TTY_PARITY;
157
158
159 stat &= ~port->ignore_status_mask;
160
161 if (stat & ULITE_STATUS_RXVALID)
162 tty_insert_flip_char(tport, ch, flag);
163
164 if (stat & ULITE_STATUS_FRAME)
165 tty_insert_flip_char(tport, 0, TTY_FRAME);
166
167 if (stat & ULITE_STATUS_OVERRUN)
168 tty_insert_flip_char(tport, 0, TTY_OVERRUN);
169
170 return 1;
171}
172
173static int ulite_transmit(struct uart_port *port, int stat)
174{
175 struct circ_buf *xmit = &port->state->xmit;
176
177 if (stat & ULITE_STATUS_TXFULL)
178 return 0;
179
180 if (port->x_char) {
181 uart_out32(port->x_char, ULITE_TX, port);
182 port->x_char = 0;
183 port->icount.tx++;
184 return 1;
185 }
186
187 if (uart_circ_empty(xmit) || uart_tx_stopped(port))
188 return 0;
189
190 uart_out32(xmit->buf[xmit->tail], ULITE_TX, port);
191 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE-1);
192 port->icount.tx++;
193
194 /* wake up */
195 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
196 uart_write_wakeup(port);
197
198 return 1;
199}
200
201static irqreturn_t ulite_isr(int irq, void *dev_id)
202{
203 struct uart_port *port = dev_id;
204 int stat, busy, n = 0;
205 unsigned long flags;
206
207 do {
208 spin_lock_irqsave(&port->lock, flags);
209 stat = uart_in32(ULITE_STATUS, port);
210 busy = ulite_receive(port, stat);
211 busy |= ulite_transmit(port, stat);
212 spin_unlock_irqrestore(&port->lock, flags);
213 n++;
214 } while (busy);
215
216 /* work done? */
217 if (n > 1) {
218 tty_flip_buffer_push(&port->state->port);
219 return IRQ_HANDLED;
220 } else {
221 return IRQ_NONE;
222 }
223}
224
225static unsigned int ulite_tx_empty(struct uart_port *port)
226{
227 unsigned long flags;
228 unsigned int ret;
229
230 spin_lock_irqsave(&port->lock, flags);
231 ret = uart_in32(ULITE_STATUS, port);
232 spin_unlock_irqrestore(&port->lock, flags);
233
234 return ret & ULITE_STATUS_TXEMPTY ? TIOCSER_TEMT : 0;
235}
236
237static unsigned int ulite_get_mctrl(struct uart_port *port)
238{
239 return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
240}
241
242static void ulite_set_mctrl(struct uart_port *port, unsigned int mctrl)
243{
244 /* N/A */
245}
246
247static void ulite_stop_tx(struct uart_port *port)
248{
249 /* N/A */
250}
251
252static void ulite_start_tx(struct uart_port *port)
253{
254 ulite_transmit(port, uart_in32(ULITE_STATUS, port));
255}
256
257static void ulite_stop_rx(struct uart_port *port)
258{
259 /* don't forward any more data (like !CREAD) */
260 port->ignore_status_mask = ULITE_STATUS_RXVALID | ULITE_STATUS_PARITY
261 | ULITE_STATUS_FRAME | ULITE_STATUS_OVERRUN;
262}
263
264static void ulite_break_ctl(struct uart_port *port, int ctl)
265{
266 /* N/A */
267}
268
269static int ulite_startup(struct uart_port *port)
270{
271 struct uartlite_data *pdata = port->private_data;
272 int ret;
273
274 ret = clk_enable(pdata->clk);
275 if (ret) {
276 dev_err(port->dev, "Failed to enable clock\n");
277 return ret;
278 }
279
280 ret = request_irq(port->irq, ulite_isr, IRQF_SHARED | IRQF_TRIGGER_RISING,
281 "uartlite", port);
282 if (ret)
283 return ret;
284
285 uart_out32(ULITE_CONTROL_RST_RX | ULITE_CONTROL_RST_TX,
286 ULITE_CONTROL, port);
287 uart_out32(ULITE_CONTROL_IE, ULITE_CONTROL, port);
288
289 return 0;
290}
291
292static void ulite_shutdown(struct uart_port *port)
293{
294 struct uartlite_data *pdata = port->private_data;
295
296 uart_out32(0, ULITE_CONTROL, port);
297 uart_in32(ULITE_CONTROL, port); /* dummy */
298 free_irq(port->irq, port);
299 clk_disable(pdata->clk);
300}
301
302static void ulite_set_termios(struct uart_port *port, struct ktermios *termios,
303 struct ktermios *old)
304{
305 unsigned long flags;
306 unsigned int baud;
307
308 spin_lock_irqsave(&port->lock, flags);
309
310 port->read_status_mask = ULITE_STATUS_RXVALID | ULITE_STATUS_OVERRUN
311 | ULITE_STATUS_TXFULL;
312
313 if (termios->c_iflag & INPCK)
314 port->read_status_mask |=
315 ULITE_STATUS_PARITY | ULITE_STATUS_FRAME;
316
317 port->ignore_status_mask = 0;
318 if (termios->c_iflag & IGNPAR)
319 port->ignore_status_mask |= ULITE_STATUS_PARITY
320 | ULITE_STATUS_FRAME | ULITE_STATUS_OVERRUN;
321
322 /* ignore all characters if CREAD is not set */
323 if ((termios->c_cflag & CREAD) == 0)
324 port->ignore_status_mask |=
325 ULITE_STATUS_RXVALID | ULITE_STATUS_PARITY
326 | ULITE_STATUS_FRAME | ULITE_STATUS_OVERRUN;
327
328 /* update timeout */
329 baud = uart_get_baud_rate(port, termios, old, 0, 460800);
330 uart_update_timeout(port, termios->c_cflag, baud);
331
332 spin_unlock_irqrestore(&port->lock, flags);
333}
334
335static const char *ulite_type(struct uart_port *port)
336{
337 return port->type == PORT_UARTLITE ? "uartlite" : NULL;
338}
339
340static void ulite_release_port(struct uart_port *port)
341{
342 release_mem_region(port->mapbase, ULITE_REGION);
343 iounmap(port->membase);
344 port->membase = NULL;
345}
346
347static int ulite_request_port(struct uart_port *port)
348{
349 struct uartlite_data *pdata = port->private_data;
350 int ret;
351
352 pr_debug("ulite console: port=%p; port->mapbase=%llx\n",
353 port, (unsigned long long) port->mapbase);
354
355 if (!request_mem_region(port->mapbase, ULITE_REGION, "uartlite")) {
356 dev_err(port->dev, "Memory region busy\n");
357 return -EBUSY;
358 }
359
360 port->membase = ioremap(port->mapbase, ULITE_REGION);
361 if (!port->membase) {
362 dev_err(port->dev, "Unable to map registers\n");
363 release_mem_region(port->mapbase, ULITE_REGION);
364 return -EBUSY;
365 }
366
367 pdata->reg_ops = &uartlite_be;
368 ret = uart_in32(ULITE_CONTROL, port);
369 uart_out32(ULITE_CONTROL_RST_TX, ULITE_CONTROL, port);
370 ret = uart_in32(ULITE_STATUS, port);
371 /* Endianess detection */
372 if ((ret & ULITE_STATUS_TXEMPTY) != ULITE_STATUS_TXEMPTY)
373 pdata->reg_ops = &uartlite_le;
374
375 return 0;
376}
377
378static void ulite_config_port(struct uart_port *port, int flags)
379{
380 if (!ulite_request_port(port))
381 port->type = PORT_UARTLITE;
382}
383
384static int ulite_verify_port(struct uart_port *port, struct serial_struct *ser)
385{
386 /* we don't want the core code to modify any port params */
387 return -EINVAL;
388}
389
390static void ulite_pm(struct uart_port *port, unsigned int state,
391 unsigned int oldstate)
392{
393 struct uartlite_data *pdata = port->private_data;
394
395 if (!state)
396 clk_enable(pdata->clk);
397 else
398 clk_disable(pdata->clk);
399}
400
401#ifdef CONFIG_CONSOLE_POLL
402static int ulite_get_poll_char(struct uart_port *port)
403{
404 if (!(uart_in32(ULITE_STATUS, port) & ULITE_STATUS_RXVALID))
405 return NO_POLL_CHAR;
406
407 return uart_in32(ULITE_RX, port);
408}
409
410static void ulite_put_poll_char(struct uart_port *port, unsigned char ch)
411{
412 while (uart_in32(ULITE_STATUS, port) & ULITE_STATUS_TXFULL)
413 cpu_relax();
414
415 /* write char to device */
416 uart_out32(ch, ULITE_TX, port);
417}
418#endif
419
420static const struct uart_ops ulite_ops = {
421 .tx_empty = ulite_tx_empty,
422 .set_mctrl = ulite_set_mctrl,
423 .get_mctrl = ulite_get_mctrl,
424 .stop_tx = ulite_stop_tx,
425 .start_tx = ulite_start_tx,
426 .stop_rx = ulite_stop_rx,
427 .break_ctl = ulite_break_ctl,
428 .startup = ulite_startup,
429 .shutdown = ulite_shutdown,
430 .set_termios = ulite_set_termios,
431 .type = ulite_type,
432 .release_port = ulite_release_port,
433 .request_port = ulite_request_port,
434 .config_port = ulite_config_port,
435 .verify_port = ulite_verify_port,
436 .pm = ulite_pm,
437#ifdef CONFIG_CONSOLE_POLL
438 .poll_get_char = ulite_get_poll_char,
439 .poll_put_char = ulite_put_poll_char,
440#endif
441};
442
443/* ---------------------------------------------------------------------
444 * Console driver operations
445 */
446
447#ifdef CONFIG_SERIAL_UARTLITE_CONSOLE
448static void ulite_console_wait_tx(struct uart_port *port)
449{
450 u8 val;
451 unsigned long timeout;
452
453 /*
454 * Spin waiting for TX fifo to have space available.
455 * When using the Microblaze Debug Module this can take up to 1s
456 */
457 timeout = jiffies + msecs_to_jiffies(1000);
458 while (1) {
459 val = uart_in32(ULITE_STATUS, port);
460 if ((val & ULITE_STATUS_TXFULL) == 0)
461 break;
462 if (time_after(jiffies, timeout)) {
463 dev_warn(port->dev,
464 "timeout waiting for TX buffer empty\n");
465 break;
466 }
467 cpu_relax();
468 }
469}
470
471static void ulite_console_putchar(struct uart_port *port, int ch)
472{
473 ulite_console_wait_tx(port);
474 uart_out32(ch, ULITE_TX, port);
475}
476
477static void ulite_console_write(struct console *co, const char *s,
478 unsigned int count)
479{
480 struct uart_port *port = console_port;
481 unsigned long flags;
482 unsigned int ier;
483 int locked = 1;
484
485 if (oops_in_progress) {
486 locked = spin_trylock_irqsave(&port->lock, flags);
487 } else
488 spin_lock_irqsave(&port->lock, flags);
489
490 /* save and disable interrupt */
491 ier = uart_in32(ULITE_STATUS, port) & ULITE_STATUS_IE;
492 uart_out32(0, ULITE_CONTROL, port);
493
494 uart_console_write(port, s, count, ulite_console_putchar);
495
496 ulite_console_wait_tx(port);
497
498 /* restore interrupt state */
499 if (ier)
500 uart_out32(ULITE_CONTROL_IE, ULITE_CONTROL, port);
501
502 if (locked)
503 spin_unlock_irqrestore(&port->lock, flags);
504}
505
506static int ulite_console_setup(struct console *co, char *options)
507{
508 struct uart_port *port = NULL;
509 int baud = 9600;
510 int bits = 8;
511 int parity = 'n';
512 int flow = 'n';
513
514 if (co->index >= 0 && co->index < ULITE_NR_UARTS)
515 port = ulite_ports + co->index;
516
517 /* Has the device been initialized yet? */
518 if (!port || !port->mapbase) {
519 pr_debug("console on ttyUL%i not present\n", co->index);
520 return -ENODEV;
521 }
522
523 console_port = port;
524
525 /* not initialized yet? */
526 if (!port->membase) {
527 if (ulite_request_port(port))
528 return -ENODEV;
529 }
530
531 if (options)
532 uart_parse_options(options, &baud, &parity, &bits, &flow);
533
534 return uart_set_options(port, co, baud, parity, bits, flow);
535}
536
537static struct uart_driver ulite_uart_driver;
538
539static struct console ulite_console = {
540 .name = ULITE_NAME,
541 .write = ulite_console_write,
542 .device = uart_console_device,
543 .setup = ulite_console_setup,
544 .flags = CON_PRINTBUFFER,
545 .index = -1, /* Specified on the cmdline (e.g. console=ttyUL0 ) */
546 .data = &ulite_uart_driver,
547};
548
549static void early_uartlite_putc(struct uart_port *port, int c)
550{
551 /*
552 * Limit how many times we'll spin waiting for TX FIFO status.
553 * This will prevent lockups if the base address is incorrectly
554 * set, or any other issue on the UARTLITE.
555 * This limit is pretty arbitrary, unless we are at about 10 baud
556 * we'll never timeout on a working UART.
557 */
558
559 unsigned retries = 1000000;
560 /* read status bit - 0x8 offset */
561 while (--retries && (readl(port->membase + 8) & (1 << 3)))
562 ;
563
564 /* Only attempt the iowrite if we didn't timeout */
565 /* write to TX_FIFO - 0x4 offset */
566 if (retries)
567 writel(c & 0xff, port->membase + 4);
568}
569
570static void early_uartlite_write(struct console *console,
571 const char *s, unsigned n)
572{
573 struct earlycon_device *device = console->data;
574 uart_console_write(&device->port, s, n, early_uartlite_putc);
575}
576
577static int __init early_uartlite_setup(struct earlycon_device *device,
578 const char *options)
579{
580 if (!device->port.membase)
581 return -ENODEV;
582
583 device->con->write = early_uartlite_write;
584 return 0;
585}
586EARLYCON_DECLARE(uartlite, early_uartlite_setup);
587OF_EARLYCON_DECLARE(uartlite_b, "xlnx,opb-uartlite-1.00.b", early_uartlite_setup);
588OF_EARLYCON_DECLARE(uartlite_a, "xlnx,xps-uartlite-1.00.a", early_uartlite_setup);
589
590#endif /* CONFIG_SERIAL_UARTLITE_CONSOLE */
591
592static struct uart_driver ulite_uart_driver = {
593 .owner = THIS_MODULE,
594 .driver_name = "uartlite",
595 .dev_name = ULITE_NAME,
596 .major = ULITE_MAJOR,
597 .minor = ULITE_MINOR,
598 .nr = ULITE_NR_UARTS,
599#ifdef CONFIG_SERIAL_UARTLITE_CONSOLE
600 .cons = &ulite_console,
601#endif
602};
603
604/* ---------------------------------------------------------------------
605 * Port assignment functions (mapping devices to uart_port structures)
606 */
607
608/** ulite_assign: register a uartlite device with the driver
609 *
610 * @dev: pointer to device structure
611 * @id: requested id number. Pass -1 for automatic port assignment
612 * @base: base address of uartlite registers
613 * @irq: irq number for uartlite
614 * @pdata: private data for uartlite
615 *
616 * Returns: 0 on success, <0 otherwise
617 */
618static int ulite_assign(struct device *dev, int id, u32 base, int irq,
619 struct uartlite_data *pdata)
620{
621 struct uart_port *port;
622 int rc;
623
624 /* if id = -1; then scan for a free id and use that */
625 if (id < 0) {
626 for (id = 0; id < ULITE_NR_UARTS; id++)
627 if (ulite_ports[id].mapbase == 0)
628 break;
629 }
630 if (id < 0 || id >= ULITE_NR_UARTS) {
631 dev_err(dev, "%s%i too large\n", ULITE_NAME, id);
632 return -EINVAL;
633 }
634
635 if ((ulite_ports[id].mapbase) && (ulite_ports[id].mapbase != base)) {
636 dev_err(dev, "cannot assign to %s%i; it is already in use\n",
637 ULITE_NAME, id);
638 return -EBUSY;
639 }
640
641 port = &ulite_ports[id];
642
643 spin_lock_init(&port->lock);
644 port->fifosize = 16;
645 port->regshift = 2;
646 port->iotype = UPIO_MEM;
647 port->iobase = 1; /* mark port in use */
648 port->mapbase = base;
649 port->membase = NULL;
650 port->ops = &ulite_ops;
651 port->irq = irq;
652 port->flags = UPF_BOOT_AUTOCONF;
653 port->dev = dev;
654 port->type = PORT_UNKNOWN;
655 port->line = id;
656 port->private_data = pdata;
657
658 dev_set_drvdata(dev, port);
659
660 /* Register the port */
661 rc = uart_add_one_port(&ulite_uart_driver, port);
662 if (rc) {
663 dev_err(dev, "uart_add_one_port() failed; err=%i\n", rc);
664 port->mapbase = 0;
665 dev_set_drvdata(dev, NULL);
666 return rc;
667 }
668
669 return 0;
670}
671
672/** ulite_release: register a uartlite device with the driver
673 *
674 * @dev: pointer to device structure
675 */
676static int ulite_release(struct device *dev)
677{
678 struct uart_port *port = dev_get_drvdata(dev);
679 int rc = 0;
680
681 if (port) {
682 rc = uart_remove_one_port(&ulite_uart_driver, port);
683 dev_set_drvdata(dev, NULL);
684 port->mapbase = 0;
685 }
686
687 return rc;
688}
689
690/**
691 * ulite_suspend - Stop the device.
692 *
693 * @dev: handle to the device structure.
694 * Return: 0 always.
695 */
696static int __maybe_unused ulite_suspend(struct device *dev)
697{
698 struct uart_port *port = dev_get_drvdata(dev);
699
700 if (port)
701 uart_suspend_port(&ulite_uart_driver, port);
702
703 return 0;
704}
705
706/**
707 * ulite_resume - Resume the device.
708 *
709 * @dev: handle to the device structure.
710 * Return: 0 on success, errno otherwise.
711 */
712static int __maybe_unused ulite_resume(struct device *dev)
713{
714 struct uart_port *port = dev_get_drvdata(dev);
715
716 if (port)
717 uart_resume_port(&ulite_uart_driver, port);
718
719 return 0;
720}
721
722/* ---------------------------------------------------------------------
723 * Platform bus binding
724 */
725
726static SIMPLE_DEV_PM_OPS(ulite_pm_ops, ulite_suspend, ulite_resume);
727
728#if defined(CONFIG_OF)
729/* Match table for of_platform binding */
730static const struct of_device_id ulite_of_match[] = {
731 { .compatible = "xlnx,opb-uartlite-1.00.b", },
732 { .compatible = "xlnx,xps-uartlite-1.00.a", },
733 {}
734};
735MODULE_DEVICE_TABLE(of, ulite_of_match);
736#endif /* CONFIG_OF */
737
738static int ulite_probe(struct platform_device *pdev)
739{
740 struct resource *res;
741 struct uartlite_data *pdata;
742 int irq, ret;
743 int id = pdev->id;
744#ifdef CONFIG_OF
745 const __be32 *prop;
746
747 prop = of_get_property(pdev->dev.of_node, "port-number", NULL);
748 if (prop)
749 id = be32_to_cpup(prop);
750#endif
751 pdata = devm_kzalloc(&pdev->dev, sizeof(struct uartlite_data),
752 GFP_KERNEL);
753 if (!pdata)
754 return -ENOMEM;
755
756 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
757 if (!res)
758 return -ENODEV;
759
760 irq = platform_get_irq(pdev, 0);
761 if (irq < 0)
762 return irq;
763
764 pdata->clk = devm_clk_get(&pdev->dev, "s_axi_aclk");
765 if (IS_ERR(pdata->clk)) {
766 if (PTR_ERR(pdata->clk) != -ENOENT)
767 return PTR_ERR(pdata->clk);
768
769 /*
770 * Clock framework support is optional, continue on
771 * anyways if we don't find a matching clock.
772 */
773 pdata->clk = NULL;
774 }
775
776 ret = clk_prepare_enable(pdata->clk);
777 if (ret) {
778 dev_err(&pdev->dev, "Failed to prepare clock\n");
779 return ret;
780 }
781
782 if (!ulite_uart_driver.state) {
783 dev_dbg(&pdev->dev, "uartlite: calling uart_register_driver()\n");
784 ret = uart_register_driver(&ulite_uart_driver);
785 if (ret < 0) {
786 dev_err(&pdev->dev, "Failed to register driver\n");
787 return ret;
788 }
789 }
790
791 ret = ulite_assign(&pdev->dev, id, res->start, irq, pdata);
792
793 clk_disable(pdata->clk);
794
795 return ret;
796}
797
798static int ulite_remove(struct platform_device *pdev)
799{
800 struct uart_port *port = dev_get_drvdata(&pdev->dev);
801 struct uartlite_data *pdata = port->private_data;
802
803 clk_disable_unprepare(pdata->clk);
804 return ulite_release(&pdev->dev);
805}
806
807/* work with hotplug and coldplug */
808MODULE_ALIAS("platform:uartlite");
809
810static struct platform_driver ulite_platform_driver = {
811 .probe = ulite_probe,
812 .remove = ulite_remove,
813 .driver = {
814 .name = "uartlite",
815 .of_match_table = of_match_ptr(ulite_of_match),
816 .pm = &ulite_pm_ops,
817 },
818};
819
820/* ---------------------------------------------------------------------
821 * Module setup/teardown
822 */
823
824static int __init ulite_init(void)
825{
826
827 pr_debug("uartlite: calling platform_driver_register()\n");
828 return platform_driver_register(&ulite_platform_driver);
829}
830
831static void __exit ulite_exit(void)
832{
833 platform_driver_unregister(&ulite_platform_driver);
834 if (ulite_uart_driver.state)
835 uart_unregister_driver(&ulite_uart_driver);
836}
837
838module_init(ulite_init);
839module_exit(ulite_exit);
840
841MODULE_AUTHOR("Peter Korsgaard <jacmet@sunsite.dk>");
842MODULE_DESCRIPTION("Xilinx uartlite serial driver");
843MODULE_LICENSE("GPL");
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * uartlite.c: Serial driver for Xilinx uartlite serial controller
4 *
5 * Copyright (C) 2006 Peter Korsgaard <jacmet@sunsite.dk>
6 * Copyright (C) 2007 Secret Lab Technologies Ltd.
7 */
8
9#include <linux/platform_device.h>
10#include <linux/module.h>
11#include <linux/bitfield.h>
12#include <linux/console.h>
13#include <linux/serial.h>
14#include <linux/serial_core.h>
15#include <linux/tty.h>
16#include <linux/tty_flip.h>
17#include <linux/delay.h>
18#include <linux/interrupt.h>
19#include <linux/init.h>
20#include <linux/io.h>
21#include <linux/iopoll.h>
22#include <linux/of.h>
23#include <linux/of_address.h>
24#include <linux/of_device.h>
25#include <linux/of_platform.h>
26#include <linux/clk.h>
27#include <linux/pm_runtime.h>
28
29#define ULITE_NAME "ttyUL"
30#define ULITE_MAJOR 204
31#define ULITE_MINOR 187
32#define ULITE_NR_UARTS CONFIG_SERIAL_UARTLITE_NR_UARTS
33
34/* ---------------------------------------------------------------------
35 * Register definitions
36 *
37 * For register details see datasheet:
38 * https://www.xilinx.com/support/documentation/ip_documentation/opb_uartlite.pdf
39 */
40
41#define ULITE_RX 0x00
42#define ULITE_TX 0x04
43#define ULITE_STATUS 0x08
44#define ULITE_CONTROL 0x0c
45
46#define ULITE_REGION 16
47
48#define ULITE_STATUS_RXVALID 0x01
49#define ULITE_STATUS_RXFULL 0x02
50#define ULITE_STATUS_TXEMPTY 0x04
51#define ULITE_STATUS_TXFULL 0x08
52#define ULITE_STATUS_IE 0x10
53#define ULITE_STATUS_OVERRUN 0x20
54#define ULITE_STATUS_FRAME 0x40
55#define ULITE_STATUS_PARITY 0x80
56
57#define ULITE_CONTROL_RST_TX 0x01
58#define ULITE_CONTROL_RST_RX 0x02
59#define ULITE_CONTROL_IE 0x10
60#define UART_AUTOSUSPEND_TIMEOUT 3000 /* ms */
61
62/* Static pointer to console port */
63#ifdef CONFIG_SERIAL_UARTLITE_CONSOLE
64static struct uart_port *console_port;
65#endif
66
67/**
68 * struct uartlite_data: Driver private data
69 * reg_ops: Functions to read/write registers
70 * clk: Our parent clock, if present
71 * baud: The baud rate configured when this device was synthesized
72 * cflags: The cflags for parity and data bits
73 */
74struct uartlite_data {
75 const struct uartlite_reg_ops *reg_ops;
76 struct clk *clk;
77 unsigned int baud;
78 tcflag_t cflags;
79};
80
81struct uartlite_reg_ops {
82 u32 (*in)(void __iomem *addr);
83 void (*out)(u32 val, void __iomem *addr);
84};
85
86static u32 uartlite_inbe32(void __iomem *addr)
87{
88 return ioread32be(addr);
89}
90
91static void uartlite_outbe32(u32 val, void __iomem *addr)
92{
93 iowrite32be(val, addr);
94}
95
96static const struct uartlite_reg_ops uartlite_be = {
97 .in = uartlite_inbe32,
98 .out = uartlite_outbe32,
99};
100
101static u32 uartlite_inle32(void __iomem *addr)
102{
103 return ioread32(addr);
104}
105
106static void uartlite_outle32(u32 val, void __iomem *addr)
107{
108 iowrite32(val, addr);
109}
110
111static const struct uartlite_reg_ops uartlite_le = {
112 .in = uartlite_inle32,
113 .out = uartlite_outle32,
114};
115
116static inline u32 uart_in32(u32 offset, struct uart_port *port)
117{
118 struct uartlite_data *pdata = port->private_data;
119
120 return pdata->reg_ops->in(port->membase + offset);
121}
122
123static inline void uart_out32(u32 val, u32 offset, struct uart_port *port)
124{
125 struct uartlite_data *pdata = port->private_data;
126
127 pdata->reg_ops->out(val, port->membase + offset);
128}
129
130static struct uart_port ulite_ports[ULITE_NR_UARTS];
131
132static struct uart_driver ulite_uart_driver;
133
134/* ---------------------------------------------------------------------
135 * Core UART driver operations
136 */
137
138static int ulite_receive(struct uart_port *port, int stat)
139{
140 struct tty_port *tport = &port->state->port;
141 unsigned char ch = 0;
142 char flag = TTY_NORMAL;
143
144 if ((stat & (ULITE_STATUS_RXVALID | ULITE_STATUS_OVERRUN
145 | ULITE_STATUS_FRAME)) == 0)
146 return 0;
147
148 /* stats */
149 if (stat & ULITE_STATUS_RXVALID) {
150 port->icount.rx++;
151 ch = uart_in32(ULITE_RX, port);
152
153 if (stat & ULITE_STATUS_PARITY)
154 port->icount.parity++;
155 }
156
157 if (stat & ULITE_STATUS_OVERRUN)
158 port->icount.overrun++;
159
160 if (stat & ULITE_STATUS_FRAME)
161 port->icount.frame++;
162
163
164 /* drop byte with parity error if IGNPAR specificed */
165 if (stat & port->ignore_status_mask & ULITE_STATUS_PARITY)
166 stat &= ~ULITE_STATUS_RXVALID;
167
168 stat &= port->read_status_mask;
169
170 if (stat & ULITE_STATUS_PARITY)
171 flag = TTY_PARITY;
172
173
174 stat &= ~port->ignore_status_mask;
175
176 if (stat & ULITE_STATUS_RXVALID)
177 tty_insert_flip_char(tport, ch, flag);
178
179 if (stat & ULITE_STATUS_FRAME)
180 tty_insert_flip_char(tport, 0, TTY_FRAME);
181
182 if (stat & ULITE_STATUS_OVERRUN)
183 tty_insert_flip_char(tport, 0, TTY_OVERRUN);
184
185 return 1;
186}
187
188static int ulite_transmit(struct uart_port *port, int stat)
189{
190 struct circ_buf *xmit = &port->state->xmit;
191
192 if (stat & ULITE_STATUS_TXFULL)
193 return 0;
194
195 if (port->x_char) {
196 uart_out32(port->x_char, ULITE_TX, port);
197 port->x_char = 0;
198 port->icount.tx++;
199 return 1;
200 }
201
202 if (uart_circ_empty(xmit) || uart_tx_stopped(port))
203 return 0;
204
205 uart_out32(xmit->buf[xmit->tail], ULITE_TX, port);
206 uart_xmit_advance(port, 1);
207
208 /* wake up */
209 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
210 uart_write_wakeup(port);
211
212 return 1;
213}
214
215static irqreturn_t ulite_isr(int irq, void *dev_id)
216{
217 struct uart_port *port = dev_id;
218 int stat, busy, n = 0;
219 unsigned long flags;
220
221 do {
222 spin_lock_irqsave(&port->lock, flags);
223 stat = uart_in32(ULITE_STATUS, port);
224 busy = ulite_receive(port, stat);
225 busy |= ulite_transmit(port, stat);
226 spin_unlock_irqrestore(&port->lock, flags);
227 n++;
228 } while (busy);
229
230 /* work done? */
231 if (n > 1) {
232 tty_flip_buffer_push(&port->state->port);
233 return IRQ_HANDLED;
234 } else {
235 return IRQ_NONE;
236 }
237}
238
239static unsigned int ulite_tx_empty(struct uart_port *port)
240{
241 unsigned long flags;
242 unsigned int ret;
243
244 spin_lock_irqsave(&port->lock, flags);
245 ret = uart_in32(ULITE_STATUS, port);
246 spin_unlock_irqrestore(&port->lock, flags);
247
248 return ret & ULITE_STATUS_TXEMPTY ? TIOCSER_TEMT : 0;
249}
250
251static unsigned int ulite_get_mctrl(struct uart_port *port)
252{
253 return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
254}
255
256static void ulite_set_mctrl(struct uart_port *port, unsigned int mctrl)
257{
258 /* N/A */
259}
260
261static void ulite_stop_tx(struct uart_port *port)
262{
263 /* N/A */
264}
265
266static void ulite_start_tx(struct uart_port *port)
267{
268 ulite_transmit(port, uart_in32(ULITE_STATUS, port));
269}
270
271static void ulite_stop_rx(struct uart_port *port)
272{
273 /* don't forward any more data (like !CREAD) */
274 port->ignore_status_mask = ULITE_STATUS_RXVALID | ULITE_STATUS_PARITY
275 | ULITE_STATUS_FRAME | ULITE_STATUS_OVERRUN;
276}
277
278static void ulite_break_ctl(struct uart_port *port, int ctl)
279{
280 /* N/A */
281}
282
283static int ulite_startup(struct uart_port *port)
284{
285 struct uartlite_data *pdata = port->private_data;
286 int ret;
287
288 ret = clk_enable(pdata->clk);
289 if (ret) {
290 dev_err(port->dev, "Failed to enable clock\n");
291 return ret;
292 }
293
294 ret = request_irq(port->irq, ulite_isr, IRQF_SHARED | IRQF_TRIGGER_RISING,
295 "uartlite", port);
296 if (ret)
297 return ret;
298
299 uart_out32(ULITE_CONTROL_RST_RX | ULITE_CONTROL_RST_TX,
300 ULITE_CONTROL, port);
301 uart_out32(ULITE_CONTROL_IE, ULITE_CONTROL, port);
302
303 return 0;
304}
305
306static void ulite_shutdown(struct uart_port *port)
307{
308 struct uartlite_data *pdata = port->private_data;
309
310 uart_out32(0, ULITE_CONTROL, port);
311 uart_in32(ULITE_CONTROL, port); /* dummy */
312 free_irq(port->irq, port);
313 clk_disable(pdata->clk);
314}
315
316static void ulite_set_termios(struct uart_port *port,
317 struct ktermios *termios,
318 const struct ktermios *old)
319{
320 unsigned long flags;
321 struct uartlite_data *pdata = port->private_data;
322
323 /* Set termios to what the hardware supports */
324 termios->c_iflag &= ~BRKINT;
325 termios->c_cflag &= ~(CSTOPB | PARENB | PARODD | CSIZE);
326 termios->c_cflag |= pdata->cflags & (PARENB | PARODD | CSIZE);
327 tty_termios_encode_baud_rate(termios, pdata->baud, pdata->baud);
328
329 spin_lock_irqsave(&port->lock, flags);
330
331 port->read_status_mask = ULITE_STATUS_RXVALID | ULITE_STATUS_OVERRUN
332 | ULITE_STATUS_TXFULL;
333
334 if (termios->c_iflag & INPCK)
335 port->read_status_mask |=
336 ULITE_STATUS_PARITY | ULITE_STATUS_FRAME;
337
338 port->ignore_status_mask = 0;
339 if (termios->c_iflag & IGNPAR)
340 port->ignore_status_mask |= ULITE_STATUS_PARITY
341 | ULITE_STATUS_FRAME | ULITE_STATUS_OVERRUN;
342
343 /* ignore all characters if CREAD is not set */
344 if ((termios->c_cflag & CREAD) == 0)
345 port->ignore_status_mask |=
346 ULITE_STATUS_RXVALID | ULITE_STATUS_PARITY
347 | ULITE_STATUS_FRAME | ULITE_STATUS_OVERRUN;
348
349 /* update timeout */
350 uart_update_timeout(port, termios->c_cflag, pdata->baud);
351
352 spin_unlock_irqrestore(&port->lock, flags);
353}
354
355static const char *ulite_type(struct uart_port *port)
356{
357 return port->type == PORT_UARTLITE ? "uartlite" : NULL;
358}
359
360static void ulite_release_port(struct uart_port *port)
361{
362 release_mem_region(port->mapbase, ULITE_REGION);
363 iounmap(port->membase);
364 port->membase = NULL;
365}
366
367static int ulite_request_port(struct uart_port *port)
368{
369 struct uartlite_data *pdata = port->private_data;
370 int ret;
371
372 pr_debug("ulite console: port=%p; port->mapbase=%llx\n",
373 port, (unsigned long long) port->mapbase);
374
375 if (!request_mem_region(port->mapbase, ULITE_REGION, "uartlite")) {
376 dev_err(port->dev, "Memory region busy\n");
377 return -EBUSY;
378 }
379
380 port->membase = ioremap(port->mapbase, ULITE_REGION);
381 if (!port->membase) {
382 dev_err(port->dev, "Unable to map registers\n");
383 release_mem_region(port->mapbase, ULITE_REGION);
384 return -EBUSY;
385 }
386
387 pdata->reg_ops = &uartlite_be;
388 ret = uart_in32(ULITE_CONTROL, port);
389 uart_out32(ULITE_CONTROL_RST_TX, ULITE_CONTROL, port);
390 ret = uart_in32(ULITE_STATUS, port);
391 /* Endianess detection */
392 if ((ret & ULITE_STATUS_TXEMPTY) != ULITE_STATUS_TXEMPTY)
393 pdata->reg_ops = &uartlite_le;
394
395 return 0;
396}
397
398static void ulite_config_port(struct uart_port *port, int flags)
399{
400 if (!ulite_request_port(port))
401 port->type = PORT_UARTLITE;
402}
403
404static int ulite_verify_port(struct uart_port *port, struct serial_struct *ser)
405{
406 /* we don't want the core code to modify any port params */
407 return -EINVAL;
408}
409
410static void ulite_pm(struct uart_port *port, unsigned int state,
411 unsigned int oldstate)
412{
413 int ret;
414
415 if (!state) {
416 ret = pm_runtime_get_sync(port->dev);
417 if (ret < 0)
418 dev_err(port->dev, "Failed to enable clocks\n");
419 } else {
420 pm_runtime_mark_last_busy(port->dev);
421 pm_runtime_put_autosuspend(port->dev);
422 }
423}
424
425#ifdef CONFIG_CONSOLE_POLL
426static int ulite_get_poll_char(struct uart_port *port)
427{
428 if (!(uart_in32(ULITE_STATUS, port) & ULITE_STATUS_RXVALID))
429 return NO_POLL_CHAR;
430
431 return uart_in32(ULITE_RX, port);
432}
433
434static void ulite_put_poll_char(struct uart_port *port, unsigned char ch)
435{
436 while (uart_in32(ULITE_STATUS, port) & ULITE_STATUS_TXFULL)
437 cpu_relax();
438
439 /* write char to device */
440 uart_out32(ch, ULITE_TX, port);
441}
442#endif
443
444static const struct uart_ops ulite_ops = {
445 .tx_empty = ulite_tx_empty,
446 .set_mctrl = ulite_set_mctrl,
447 .get_mctrl = ulite_get_mctrl,
448 .stop_tx = ulite_stop_tx,
449 .start_tx = ulite_start_tx,
450 .stop_rx = ulite_stop_rx,
451 .break_ctl = ulite_break_ctl,
452 .startup = ulite_startup,
453 .shutdown = ulite_shutdown,
454 .set_termios = ulite_set_termios,
455 .type = ulite_type,
456 .release_port = ulite_release_port,
457 .request_port = ulite_request_port,
458 .config_port = ulite_config_port,
459 .verify_port = ulite_verify_port,
460 .pm = ulite_pm,
461#ifdef CONFIG_CONSOLE_POLL
462 .poll_get_char = ulite_get_poll_char,
463 .poll_put_char = ulite_put_poll_char,
464#endif
465};
466
467/* ---------------------------------------------------------------------
468 * Console driver operations
469 */
470
471#ifdef CONFIG_SERIAL_UARTLITE_CONSOLE
472static void ulite_console_wait_tx(struct uart_port *port)
473{
474 u8 val;
475
476 /*
477 * Spin waiting for TX fifo to have space available.
478 * When using the Microblaze Debug Module this can take up to 1s
479 */
480 if (read_poll_timeout_atomic(uart_in32, val, !(val & ULITE_STATUS_TXFULL),
481 0, 1000000, false, ULITE_STATUS, port))
482 dev_warn(port->dev,
483 "timeout waiting for TX buffer empty\n");
484}
485
486static void ulite_console_putchar(struct uart_port *port, unsigned char ch)
487{
488 ulite_console_wait_tx(port);
489 uart_out32(ch, ULITE_TX, port);
490}
491
492static void ulite_console_write(struct console *co, const char *s,
493 unsigned int count)
494{
495 struct uart_port *port = console_port;
496 unsigned long flags;
497 unsigned int ier;
498 int locked = 1;
499
500 if (oops_in_progress) {
501 locked = spin_trylock_irqsave(&port->lock, flags);
502 } else
503 spin_lock_irqsave(&port->lock, flags);
504
505 /* save and disable interrupt */
506 ier = uart_in32(ULITE_STATUS, port) & ULITE_STATUS_IE;
507 uart_out32(0, ULITE_CONTROL, port);
508
509 uart_console_write(port, s, count, ulite_console_putchar);
510
511 ulite_console_wait_tx(port);
512
513 /* restore interrupt state */
514 if (ier)
515 uart_out32(ULITE_CONTROL_IE, ULITE_CONTROL, port);
516
517 if (locked)
518 spin_unlock_irqrestore(&port->lock, flags);
519}
520
521static int ulite_console_setup(struct console *co, char *options)
522{
523 struct uart_port *port = NULL;
524 int baud = 9600;
525 int bits = 8;
526 int parity = 'n';
527 int flow = 'n';
528
529 if (co->index >= 0 && co->index < ULITE_NR_UARTS)
530 port = ulite_ports + co->index;
531
532 /* Has the device been initialized yet? */
533 if (!port || !port->mapbase) {
534 pr_debug("console on ttyUL%i not present\n", co->index);
535 return -ENODEV;
536 }
537
538 console_port = port;
539
540 /* not initialized yet? */
541 if (!port->membase) {
542 if (ulite_request_port(port))
543 return -ENODEV;
544 }
545
546 if (options)
547 uart_parse_options(options, &baud, &parity, &bits, &flow);
548
549 return uart_set_options(port, co, baud, parity, bits, flow);
550}
551
552static struct console ulite_console = {
553 .name = ULITE_NAME,
554 .write = ulite_console_write,
555 .device = uart_console_device,
556 .setup = ulite_console_setup,
557 .flags = CON_PRINTBUFFER,
558 .index = -1, /* Specified on the cmdline (e.g. console=ttyUL0 ) */
559 .data = &ulite_uart_driver,
560};
561
562static void early_uartlite_putc(struct uart_port *port, unsigned char c)
563{
564 /*
565 * Limit how many times we'll spin waiting for TX FIFO status.
566 * This will prevent lockups if the base address is incorrectly
567 * set, or any other issue on the UARTLITE.
568 * This limit is pretty arbitrary, unless we are at about 10 baud
569 * we'll never timeout on a working UART.
570 */
571 unsigned retries = 1000000;
572
573 while (--retries &&
574 (readl(port->membase + ULITE_STATUS) & ULITE_STATUS_TXFULL))
575 ;
576
577 /* Only attempt the iowrite if we didn't timeout */
578 if (retries)
579 writel(c & 0xff, port->membase + ULITE_TX);
580}
581
582static void early_uartlite_write(struct console *console,
583 const char *s, unsigned n)
584{
585 struct earlycon_device *device = console->data;
586 uart_console_write(&device->port, s, n, early_uartlite_putc);
587}
588
589static int __init early_uartlite_setup(struct earlycon_device *device,
590 const char *options)
591{
592 if (!device->port.membase)
593 return -ENODEV;
594
595 device->con->write = early_uartlite_write;
596 return 0;
597}
598EARLYCON_DECLARE(uartlite, early_uartlite_setup);
599OF_EARLYCON_DECLARE(uartlite_b, "xlnx,opb-uartlite-1.00.b", early_uartlite_setup);
600OF_EARLYCON_DECLARE(uartlite_a, "xlnx,xps-uartlite-1.00.a", early_uartlite_setup);
601
602#endif /* CONFIG_SERIAL_UARTLITE_CONSOLE */
603
604static struct uart_driver ulite_uart_driver = {
605 .owner = THIS_MODULE,
606 .driver_name = "uartlite",
607 .dev_name = ULITE_NAME,
608 .major = ULITE_MAJOR,
609 .minor = ULITE_MINOR,
610 .nr = ULITE_NR_UARTS,
611#ifdef CONFIG_SERIAL_UARTLITE_CONSOLE
612 .cons = &ulite_console,
613#endif
614};
615
616/* ---------------------------------------------------------------------
617 * Port assignment functions (mapping devices to uart_port structures)
618 */
619
620/** ulite_assign: register a uartlite device with the driver
621 *
622 * @dev: pointer to device structure
623 * @id: requested id number. Pass -1 for automatic port assignment
624 * @base: base address of uartlite registers
625 * @irq: irq number for uartlite
626 * @pdata: private data for uartlite
627 *
628 * Returns: 0 on success, <0 otherwise
629 */
630static int ulite_assign(struct device *dev, int id, phys_addr_t base, int irq,
631 struct uartlite_data *pdata)
632{
633 struct uart_port *port;
634 int rc;
635
636 /* if id = -1; then scan for a free id and use that */
637 if (id < 0) {
638 for (id = 0; id < ULITE_NR_UARTS; id++)
639 if (ulite_ports[id].mapbase == 0)
640 break;
641 }
642 if (id < 0 || id >= ULITE_NR_UARTS) {
643 dev_err(dev, "%s%i too large\n", ULITE_NAME, id);
644 return -EINVAL;
645 }
646
647 if ((ulite_ports[id].mapbase) && (ulite_ports[id].mapbase != base)) {
648 dev_err(dev, "cannot assign to %s%i; it is already in use\n",
649 ULITE_NAME, id);
650 return -EBUSY;
651 }
652
653 port = &ulite_ports[id];
654
655 spin_lock_init(&port->lock);
656 port->fifosize = 16;
657 port->regshift = 2;
658 port->iotype = UPIO_MEM;
659 port->iobase = 1; /* mark port in use */
660 port->mapbase = base;
661 port->membase = NULL;
662 port->ops = &ulite_ops;
663 port->irq = irq;
664 port->flags = UPF_BOOT_AUTOCONF;
665 port->dev = dev;
666 port->type = PORT_UNKNOWN;
667 port->line = id;
668 port->private_data = pdata;
669
670 dev_set_drvdata(dev, port);
671
672 /* Register the port */
673 rc = uart_add_one_port(&ulite_uart_driver, port);
674 if (rc) {
675 dev_err(dev, "uart_add_one_port() failed; err=%i\n", rc);
676 port->mapbase = 0;
677 dev_set_drvdata(dev, NULL);
678 return rc;
679 }
680
681 return 0;
682}
683
684/** ulite_release: register a uartlite device with the driver
685 *
686 * @dev: pointer to device structure
687 */
688static int ulite_release(struct device *dev)
689{
690 struct uart_port *port = dev_get_drvdata(dev);
691 int rc = 0;
692
693 if (port) {
694 rc = uart_remove_one_port(&ulite_uart_driver, port);
695 dev_set_drvdata(dev, NULL);
696 port->mapbase = 0;
697 }
698
699 return rc;
700}
701
702/**
703 * ulite_suspend - Stop the device.
704 *
705 * @dev: handle to the device structure.
706 * Return: 0 always.
707 */
708static int __maybe_unused ulite_suspend(struct device *dev)
709{
710 struct uart_port *port = dev_get_drvdata(dev);
711
712 if (port)
713 uart_suspend_port(&ulite_uart_driver, port);
714
715 return 0;
716}
717
718/**
719 * ulite_resume - Resume the device.
720 *
721 * @dev: handle to the device structure.
722 * Return: 0 on success, errno otherwise.
723 */
724static int __maybe_unused ulite_resume(struct device *dev)
725{
726 struct uart_port *port = dev_get_drvdata(dev);
727
728 if (port)
729 uart_resume_port(&ulite_uart_driver, port);
730
731 return 0;
732}
733
734static int __maybe_unused ulite_runtime_suspend(struct device *dev)
735{
736 struct uart_port *port = dev_get_drvdata(dev);
737 struct uartlite_data *pdata = port->private_data;
738
739 clk_disable(pdata->clk);
740 return 0;
741};
742
743static int __maybe_unused ulite_runtime_resume(struct device *dev)
744{
745 struct uart_port *port = dev_get_drvdata(dev);
746 struct uartlite_data *pdata = port->private_data;
747 int ret;
748
749 ret = clk_enable(pdata->clk);
750 if (ret) {
751 dev_err(dev, "Cannot enable clock.\n");
752 return ret;
753 }
754 return 0;
755}
756
757/* ---------------------------------------------------------------------
758 * Platform bus binding
759 */
760
761static const struct dev_pm_ops ulite_pm_ops = {
762 SET_SYSTEM_SLEEP_PM_OPS(ulite_suspend, ulite_resume)
763 SET_RUNTIME_PM_OPS(ulite_runtime_suspend,
764 ulite_runtime_resume, NULL)
765};
766
767#if defined(CONFIG_OF)
768/* Match table for of_platform binding */
769static const struct of_device_id ulite_of_match[] = {
770 { .compatible = "xlnx,opb-uartlite-1.00.b", },
771 { .compatible = "xlnx,xps-uartlite-1.00.a", },
772 {}
773};
774MODULE_DEVICE_TABLE(of, ulite_of_match);
775#endif /* CONFIG_OF */
776
777static int ulite_probe(struct platform_device *pdev)
778{
779 struct resource *res;
780 struct uartlite_data *pdata;
781 int irq, ret;
782 int id = pdev->id;
783
784 pdata = devm_kzalloc(&pdev->dev, sizeof(struct uartlite_data),
785 GFP_KERNEL);
786 if (!pdata)
787 return -ENOMEM;
788
789 if (IS_ENABLED(CONFIG_OF)) {
790 const char *prop;
791 struct device_node *np = pdev->dev.of_node;
792 u32 val = 0;
793
794 prop = "port-number";
795 ret = of_property_read_u32(np, prop, &id);
796 if (ret && ret != -EINVAL)
797of_err:
798 return dev_err_probe(&pdev->dev, ret,
799 "could not read %s\n", prop);
800
801 prop = "current-speed";
802 ret = of_property_read_u32(np, prop, &pdata->baud);
803 if (ret)
804 goto of_err;
805
806 prop = "xlnx,use-parity";
807 ret = of_property_read_u32(np, prop, &val);
808 if (ret && ret != -EINVAL)
809 goto of_err;
810
811 if (val) {
812 prop = "xlnx,odd-parity";
813 ret = of_property_read_u32(np, prop, &val);
814 if (ret)
815 goto of_err;
816
817 if (val)
818 pdata->cflags |= PARODD;
819 pdata->cflags |= PARENB;
820 }
821
822 val = 8;
823 prop = "xlnx,data-bits";
824 ret = of_property_read_u32(np, prop, &val);
825 if (ret && ret != -EINVAL)
826 goto of_err;
827
828 switch (val) {
829 case 5:
830 pdata->cflags |= CS5;
831 break;
832 case 6:
833 pdata->cflags |= CS6;
834 break;
835 case 7:
836 pdata->cflags |= CS7;
837 break;
838 case 8:
839 pdata->cflags |= CS8;
840 break;
841 default:
842 return dev_err_probe(&pdev->dev, -EINVAL,
843 "bad data bits %d\n", val);
844 }
845 } else {
846 pdata->baud = 9600;
847 pdata->cflags = CS8;
848 }
849
850 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
851 if (!res)
852 return -ENODEV;
853
854 irq = platform_get_irq(pdev, 0);
855 if (irq < 0)
856 return irq;
857
858 pdata->clk = devm_clk_get(&pdev->dev, "s_axi_aclk");
859 if (IS_ERR(pdata->clk)) {
860 if (PTR_ERR(pdata->clk) != -ENOENT)
861 return PTR_ERR(pdata->clk);
862
863 /*
864 * Clock framework support is optional, continue on
865 * anyways if we don't find a matching clock.
866 */
867 pdata->clk = NULL;
868 }
869
870 ret = clk_prepare_enable(pdata->clk);
871 if (ret) {
872 dev_err(&pdev->dev, "Failed to prepare clock\n");
873 return ret;
874 }
875
876 pm_runtime_use_autosuspend(&pdev->dev);
877 pm_runtime_set_autosuspend_delay(&pdev->dev, UART_AUTOSUSPEND_TIMEOUT);
878 pm_runtime_set_active(&pdev->dev);
879 pm_runtime_enable(&pdev->dev);
880
881 if (!ulite_uart_driver.state) {
882 dev_dbg(&pdev->dev, "uartlite: calling uart_register_driver()\n");
883 ret = uart_register_driver(&ulite_uart_driver);
884 if (ret < 0) {
885 dev_err(&pdev->dev, "Failed to register driver\n");
886 clk_disable_unprepare(pdata->clk);
887 return ret;
888 }
889 }
890
891 ret = ulite_assign(&pdev->dev, id, res->start, irq, pdata);
892
893 pm_runtime_mark_last_busy(&pdev->dev);
894 pm_runtime_put_autosuspend(&pdev->dev);
895
896 return ret;
897}
898
899static int ulite_remove(struct platform_device *pdev)
900{
901 struct uart_port *port = dev_get_drvdata(&pdev->dev);
902 struct uartlite_data *pdata = port->private_data;
903 int rc;
904
905 clk_disable_unprepare(pdata->clk);
906 rc = ulite_release(&pdev->dev);
907 pm_runtime_disable(&pdev->dev);
908 pm_runtime_set_suspended(&pdev->dev);
909 pm_runtime_dont_use_autosuspend(&pdev->dev);
910 return rc;
911}
912
913/* work with hotplug and coldplug */
914MODULE_ALIAS("platform:uartlite");
915
916static struct platform_driver ulite_platform_driver = {
917 .probe = ulite_probe,
918 .remove = ulite_remove,
919 .driver = {
920 .name = "uartlite",
921 .of_match_table = of_match_ptr(ulite_of_match),
922 .pm = &ulite_pm_ops,
923 },
924};
925
926/* ---------------------------------------------------------------------
927 * Module setup/teardown
928 */
929
930static int __init ulite_init(void)
931{
932
933 pr_debug("uartlite: calling platform_driver_register()\n");
934 return platform_driver_register(&ulite_platform_driver);
935}
936
937static void __exit ulite_exit(void)
938{
939 platform_driver_unregister(&ulite_platform_driver);
940 if (ulite_uart_driver.state)
941 uart_unregister_driver(&ulite_uart_driver);
942}
943
944module_init(ulite_init);
945module_exit(ulite_exit);
946
947MODULE_AUTHOR("Peter Korsgaard <jacmet@sunsite.dk>");
948MODULE_DESCRIPTION("Xilinx uartlite serial driver");
949MODULE_LICENSE("GPL");