Loading...
1perf-report(1)
2==============
3
4NAME
5----
6perf-report - Read perf.data (created by perf record) and display the profile
7
8SYNOPSIS
9--------
10[verse]
11'perf report' [-i <file> | --input=file]
12
13DESCRIPTION
14-----------
15This command displays the performance counter profile information recorded
16via perf record.
17
18OPTIONS
19-------
20-i::
21--input=::
22 Input file name. (default: perf.data unless stdin is a fifo)
23
24-v::
25--verbose::
26 Be more verbose. (show symbol address, etc)
27
28-n::
29--show-nr-samples::
30 Show the number of samples for each symbol
31
32--show-cpu-utilization::
33 Show sample percentage for different cpu modes.
34
35-T::
36--threads::
37 Show per-thread event counters. The input data file should be recorded
38 with -s option.
39-c::
40--comms=::
41 Only consider symbols in these comms. CSV that understands
42 file://filename entries. This option will affect the percentage of
43 the overhead column. See --percentage for more info.
44--pid=::
45 Only show events for given process ID (comma separated list).
46
47--tid=::
48 Only show events for given thread ID (comma separated list).
49-d::
50--dsos=::
51 Only consider symbols in these dsos. CSV that understands
52 file://filename entries. This option will affect the percentage of
53 the overhead column. See --percentage for more info.
54-S::
55--symbols=::
56 Only consider these symbols. CSV that understands
57 file://filename entries. This option will affect the percentage of
58 the overhead column. See --percentage for more info.
59
60--symbol-filter=::
61 Only show symbols that match (partially) with this filter.
62
63-U::
64--hide-unresolved::
65 Only display entries resolved to a symbol.
66
67-s::
68--sort=::
69 Sort histogram entries by given key(s) - multiple keys can be specified
70 in CSV format. Following sort keys are available:
71 pid, comm, dso, symbol, parent, cpu, socket, srcline, weight, local_weight.
72
73 Each key has following meaning:
74
75 - comm: command (name) of the task which can be read via /proc/<pid>/comm
76 - pid: command and tid of the task
77 - dso: name of library or module executed at the time of sample
78 - symbol: name of function executed at the time of sample
79 - parent: name of function matched to the parent regex filter. Unmatched
80 entries are displayed as "[other]".
81 - cpu: cpu number the task ran at the time of sample
82 - socket: processor socket number the task ran at the time of sample
83 - srcline: filename and line number executed at the time of sample. The
84 DWARF debugging info must be provided.
85 - srcfile: file name of the source file of the same. Requires dwarf
86 information.
87 - weight: Event specific weight, e.g. memory latency or transaction
88 abort cost. This is the global weight.
89 - local_weight: Local weight version of the weight above.
90 - transaction: Transaction abort flags.
91 - overhead: Overhead percentage of sample
92 - overhead_sys: Overhead percentage of sample running in system mode
93 - overhead_us: Overhead percentage of sample running in user mode
94 - overhead_guest_sys: Overhead percentage of sample running in system mode
95 on guest machine
96 - overhead_guest_us: Overhead percentage of sample running in user mode on
97 guest machine
98 - sample: Number of sample
99 - period: Raw number of event count of sample
100
101 By default, comm, dso and symbol keys are used.
102 (i.e. --sort comm,dso,symbol)
103
104 If --branch-stack option is used, following sort keys are also
105 available:
106 dso_from, dso_to, symbol_from, symbol_to, mispredict.
107
108 - dso_from: name of library or module branched from
109 - dso_to: name of library or module branched to
110 - symbol_from: name of function branched from
111 - symbol_to: name of function branched to
112 - mispredict: "N" for predicted branch, "Y" for mispredicted branch
113 - in_tx: branch in TSX transaction
114 - abort: TSX transaction abort.
115 - cycles: Cycles in basic block
116
117 And default sort keys are changed to comm, dso_from, symbol_from, dso_to
118 and symbol_to, see '--branch-stack'.
119
120 If the --mem-mode option is used, the following sort keys are also available
121 (incompatible with --branch-stack):
122 symbol_daddr, dso_daddr, locked, tlb, mem, snoop, dcacheline.
123
124 - symbol_daddr: name of data symbol being executed on at the time of sample
125 - dso_daddr: name of library or module containing the data being executed
126 on at the time of the sample
127 - locked: whether the bus was locked at the time of the sample
128 - tlb: type of tlb access for the data at the time of the sample
129 - mem: type of memory access for the data at the time of the sample
130 - snoop: type of snoop (if any) for the data at the time of the sample
131 - dcacheline: the cacheline the data address is on at the time of the sample
132
133 And the default sort keys are changed to local_weight, mem, sym, dso,
134 symbol_daddr, dso_daddr, snoop, tlb, locked, see '--mem-mode'.
135
136 If the data file has tracepoint event(s), following (dynamic) sort keys
137 are also available:
138 trace, trace_fields, [<event>.]<field>[/raw]
139
140 - trace: pretty printed trace output in a single column
141 - trace_fields: fields in tracepoints in separate columns
142 - <field name>: optional event and field name for a specific field
143
144 The last form consists of event and field names. If event name is
145 omitted, it searches all events for matching field name. The matched
146 field will be shown only for the event has the field. The event name
147 supports substring match so user doesn't need to specify full subsystem
148 and event name everytime. For example, 'sched:sched_switch' event can
149 be shortened to 'switch' as long as it's not ambiguous. Also event can
150 be specified by its index (starting from 1) preceded by the '%'.
151 So '%1' is the first event, '%2' is the second, and so on.
152
153 The field name can have '/raw' suffix which disables pretty printing
154 and shows raw field value like hex numbers. The --raw-trace option
155 has the same effect for all dynamic sort keys.
156
157 The default sort keys are changed to 'trace' if all events in the data
158 file are tracepoint.
159
160-F::
161--fields=::
162 Specify output field - multiple keys can be specified in CSV format.
163 Following fields are available:
164 overhead, overhead_sys, overhead_us, overhead_children, sample and period.
165 Also it can contain any sort key(s).
166
167 By default, every sort keys not specified in -F will be appended
168 automatically.
169
170-p::
171--parent=<regex>::
172 A regex filter to identify parent. The parent is a caller of this
173 function and searched through the callchain, thus it requires callchain
174 information recorded. The pattern is in the exteneded regex format and
175 defaults to "\^sys_|^do_page_fault", see '--sort parent'.
176
177-x::
178--exclude-other::
179 Only display entries with parent-match.
180
181-w::
182--column-widths=<width[,width...]>::
183 Force each column width to the provided list, for large terminal
184 readability. 0 means no limit (default behavior).
185
186-t::
187--field-separator=::
188 Use a special separator character and don't pad with spaces, replacing
189 all occurrences of this separator in symbol names (and other output)
190 with a '.' character, that thus it's the only non valid separator.
191
192-D::
193--dump-raw-trace::
194 Dump raw trace in ASCII.
195
196-g::
197--call-graph=<print_type,threshold[,print_limit],order,sort_key[,branch],value>::
198 Display call chains using type, min percent threshold, print limit,
199 call order, sort key, optional branch and value. Note that ordering of
200 parameters is not fixed so any parement can be given in an arbitraty order.
201 One exception is the print_limit which should be preceded by threshold.
202
203 print_type can be either:
204 - flat: single column, linear exposure of call chains.
205 - graph: use a graph tree, displaying absolute overhead rates. (default)
206 - fractal: like graph, but displays relative rates. Each branch of
207 the tree is considered as a new profiled object.
208 - folded: call chains are displayed in a line, separated by semicolons
209 - none: disable call chain display.
210
211 threshold is a percentage value which specifies a minimum percent to be
212 included in the output call graph. Default is 0.5 (%).
213
214 print_limit is only applied when stdio interface is used. It's to limit
215 number of call graph entries in a single hist entry. Note that it needs
216 to be given after threshold (but not necessarily consecutive).
217 Default is 0 (unlimited).
218
219 order can be either:
220 - callee: callee based call graph.
221 - caller: inverted caller based call graph.
222 Default is 'caller' when --children is used, otherwise 'callee'.
223
224 sort_key can be:
225 - function: compare on functions (default)
226 - address: compare on individual code addresses
227
228 branch can be:
229 - branch: include last branch information in callgraph when available.
230 Usually more convenient to use --branch-history for this.
231
232 value can be:
233 - percent: diplay overhead percent (default)
234 - period: display event period
235 - count: display event count
236
237--children::
238 Accumulate callchain of children to parent entry so that then can
239 show up in the output. The output will have a new "Children" column
240 and will be sorted on the data. It requires callchains are recorded.
241 See the `overhead calculation' section for more details.
242
243--max-stack::
244 Set the stack depth limit when parsing the callchain, anything
245 beyond the specified depth will be ignored. This is a trade-off
246 between information loss and faster processing especially for
247 workloads that can have a very long callchain stack.
248 Note that when using the --itrace option the synthesized callchain size
249 will override this value if the synthesized callchain size is bigger.
250
251 Default: 127
252
253-G::
254--inverted::
255 alias for inverted caller based call graph.
256
257--ignore-callees=<regex>::
258 Ignore callees of the function(s) matching the given regex.
259 This has the effect of collecting the callers of each such
260 function into one place in the call-graph tree.
261
262--pretty=<key>::
263 Pretty printing style. key: normal, raw
264
265--stdio:: Use the stdio interface.
266
267--tui:: Use the TUI interface, that is integrated with annotate and allows
268 zooming into DSOs or threads, among other features. Use of --tui
269 requires a tty, if one is not present, as when piping to other
270 commands, the stdio interface is used.
271
272--gtk:: Use the GTK2 interface.
273
274-k::
275--vmlinux=<file>::
276 vmlinux pathname
277
278--kallsyms=<file>::
279 kallsyms pathname
280
281-m::
282--modules::
283 Load module symbols. WARNING: This should only be used with -k and
284 a LIVE kernel.
285
286-f::
287--force::
288 Don't complain, do it.
289
290--symfs=<directory>::
291 Look for files with symbols relative to this directory.
292
293-C::
294--cpu:: Only report samples for the list of CPUs provided. Multiple CPUs can
295 be provided as a comma-separated list with no space: 0,1. Ranges of
296 CPUs are specified with -: 0-2. Default is to report samples on all
297 CPUs.
298
299-M::
300--disassembler-style=:: Set disassembler style for objdump.
301
302--source::
303 Interleave source code with assembly code. Enabled by default,
304 disable with --no-source.
305
306--asm-raw::
307 Show raw instruction encoding of assembly instructions.
308
309--show-total-period:: Show a column with the sum of periods.
310
311-I::
312--show-info::
313 Display extended information about the perf.data file. This adds
314 information which may be very large and thus may clutter the display.
315 It currently includes: cpu and numa topology of the host system.
316
317-b::
318--branch-stack::
319 Use the addresses of sampled taken branches instead of the instruction
320 address to build the histograms. To generate meaningful output, the
321 perf.data file must have been obtained using perf record -b or
322 perf record --branch-filter xxx where xxx is a branch filter option.
323 perf report is able to auto-detect whether a perf.data file contains
324 branch stacks and it will automatically switch to the branch view mode,
325 unless --no-branch-stack is used.
326
327--branch-history::
328 Add the addresses of sampled taken branches to the callstack.
329 This allows to examine the path the program took to each sample.
330 The data collection must have used -b (or -j) and -g.
331
332--objdump=<path>::
333 Path to objdump binary.
334
335--group::
336 Show event group information together.
337
338--demangle::
339 Demangle symbol names to human readable form. It's enabled by default,
340 disable with --no-demangle.
341
342--demangle-kernel::
343 Demangle kernel symbol names to human readable form (for C++ kernels).
344
345--mem-mode::
346 Use the data addresses of samples in addition to instruction addresses
347 to build the histograms. To generate meaningful output, the perf.data
348 file must have been obtained using perf record -d -W and using a
349 special event -e cpu/mem-loads/ or -e cpu/mem-stores/. See
350 'perf mem' for simpler access.
351
352--percent-limit::
353 Do not show entries which have an overhead under that percent.
354 (Default: 0). Note that this option also sets the percent limit (threshold)
355 of callchains. However the default value of callchain threshold is
356 different than the default value of hist entries. Please see the
357 --call-graph option for details.
358
359--percentage::
360 Determine how to display the overhead percentage of filtered entries.
361 Filters can be applied by --comms, --dsos and/or --symbols options and
362 Zoom operations on the TUI (thread, dso, etc).
363
364 "relative" means it's relative to filtered entries only so that the
365 sum of shown entries will be always 100%. "absolute" means it retains
366 the original value before and after the filter is applied.
367
368--header::
369 Show header information in the perf.data file. This includes
370 various information like hostname, OS and perf version, cpu/mem
371 info, perf command line, event list and so on. Currently only
372 --stdio output supports this feature.
373
374--header-only::
375 Show only perf.data header (forces --stdio).
376
377--itrace::
378 Options for decoding instruction tracing data. The options are:
379
380include::itrace.txt[]
381
382 To disable decoding entirely, use --no-itrace.
383
384--full-source-path::
385 Show the full path for source files for srcline output.
386
387--show-ref-call-graph::
388 When multiple events are sampled, it may not be needed to collect
389 callgraphs for all of them. The sample sites are usually nearby,
390 and it's enough to collect the callgraphs on a reference event.
391 So user can use "call-graph=no" event modifier to disable callgraph
392 for other events to reduce the overhead.
393 However, perf report cannot show callgraphs for the event which
394 disable the callgraph.
395 This option extends the perf report to show reference callgraphs,
396 which collected by reference event, in no callgraph event.
397
398--socket-filter::
399 Only report the samples on the processor socket that match with this filter
400
401--raw-trace::
402 When displaying traceevent output, do not use print fmt or plugins.
403
404--hierarchy::
405 Enable hierarchical output.
406
407include::callchain-overhead-calculation.txt[]
408
409SEE ALSO
410--------
411linkperf:perf-stat[1], linkperf:perf-annotate[1]
1perf-report(1)
2==============
3
4NAME
5----
6perf-report - Read perf.data (created by perf record) and display the profile
7
8SYNOPSIS
9--------
10[verse]
11'perf report' [-i <file> | --input=file]
12
13DESCRIPTION
14-----------
15This command displays the performance counter profile information recorded
16via perf record.
17
18OPTIONS
19-------
20-i::
21--input=::
22 Input file name. (default: perf.data unless stdin is a fifo)
23
24-v::
25--verbose::
26 Be more verbose. (show symbol address, etc)
27
28-q::
29--quiet::
30 Do not show any warnings or messages. (Suppress -v)
31
32-n::
33--show-nr-samples::
34 Show the number of samples for each symbol
35
36--show-cpu-utilization::
37 Show sample percentage for different cpu modes.
38
39-T::
40--threads::
41 Show per-thread event counters. The input data file should be recorded
42 with -s option.
43-c::
44--comms=::
45 Only consider symbols in these comms. CSV that understands
46 file://filename entries. This option will affect the percentage of
47 the overhead column. See --percentage for more info.
48--pid=::
49 Only show events for given process ID (comma separated list).
50
51--tid=::
52 Only show events for given thread ID (comma separated list).
53-d::
54--dsos=::
55 Only consider symbols in these dsos. CSV that understands
56 file://filename entries. This option will affect the percentage of
57 the overhead column. See --percentage for more info.
58-S::
59--symbols=::
60 Only consider these symbols. CSV that understands
61 file://filename entries. This option will affect the percentage of
62 the overhead column. See --percentage for more info.
63
64--symbol-filter=::
65 Only show symbols that match (partially) with this filter.
66
67-U::
68--hide-unresolved::
69 Only display entries resolved to a symbol.
70
71-s::
72--sort=::
73 Sort histogram entries by given key(s) - multiple keys can be specified
74 in CSV format. Following sort keys are available:
75 pid, comm, dso, symbol, parent, cpu, socket, srcline, weight,
76 local_weight, cgroup_id, addr.
77
78 Each key has following meaning:
79
80 - comm: command (name) of the task which can be read via /proc/<pid>/comm
81 - pid: command and tid of the task
82 - dso: name of library or module executed at the time of sample
83 - dso_size: size of library or module executed at the time of sample
84 - symbol: name of function executed at the time of sample
85 - symbol_size: size of function executed at the time of sample
86 - parent: name of function matched to the parent regex filter. Unmatched
87 entries are displayed as "[other]".
88 - cpu: cpu number the task ran at the time of sample
89 - socket: processor socket number the task ran at the time of sample
90 - srcline: filename and line number executed at the time of sample. The
91 DWARF debugging info must be provided.
92 - srcfile: file name of the source file of the samples. Requires dwarf
93 information.
94 - weight: Event specific weight, e.g. memory latency or transaction
95 abort cost. This is the global weight.
96 - local_weight: Local weight version of the weight above.
97 - cgroup_id: ID derived from cgroup namespace device and inode numbers.
98 - cgroup: cgroup pathname in the cgroupfs.
99 - transaction: Transaction abort flags.
100 - overhead: Overhead percentage of sample
101 - overhead_sys: Overhead percentage of sample running in system mode
102 - overhead_us: Overhead percentage of sample running in user mode
103 - overhead_guest_sys: Overhead percentage of sample running in system mode
104 on guest machine
105 - overhead_guest_us: Overhead percentage of sample running in user mode on
106 guest machine
107 - sample: Number of sample
108 - period: Raw number of event count of sample
109 - time: Separate the samples by time stamp with the resolution specified by
110 --time-quantum (default 100ms). Specify with overhead and before it.
111 - code_page_size: the code page size of sampled code address (ip)
112 - ins_lat: Instruction latency in core cycles. This is the global instruction
113 latency
114 - local_ins_lat: Local instruction latency version
115 - p_stage_cyc: On powerpc, this presents the number of cycles spent in a
116 pipeline stage. And currently supported only on powerpc.
117 - addr: (Full) virtual address of the sampled instruction
118
119 By default, comm, dso and symbol keys are used.
120 (i.e. --sort comm,dso,symbol)
121
122 If --branch-stack option is used, following sort keys are also
123 available:
124
125 - dso_from: name of library or module branched from
126 - dso_to: name of library or module branched to
127 - symbol_from: name of function branched from
128 - symbol_to: name of function branched to
129 - srcline_from: source file and line branched from
130 - srcline_to: source file and line branched to
131 - mispredict: "N" for predicted branch, "Y" for mispredicted branch
132 - in_tx: branch in TSX transaction
133 - abort: TSX transaction abort.
134 - cycles: Cycles in basic block
135
136 And default sort keys are changed to comm, dso_from, symbol_from, dso_to
137 and symbol_to, see '--branch-stack'.
138
139 When the sort key symbol is specified, columns "IPC" and "IPC Coverage"
140 are enabled automatically. Column "IPC" reports the average IPC per function
141 and column "IPC coverage" reports the percentage of instructions with
142 sampled IPC in this function. IPC means Instruction Per Cycle. If it's low,
143 it indicates there may be a performance bottleneck when the function is
144 executed, such as a memory access bottleneck. If a function has high overhead
145 and low IPC, it's worth further analyzing it to optimize its performance.
146
147 If the --mem-mode option is used, the following sort keys are also available
148 (incompatible with --branch-stack):
149 symbol_daddr, dso_daddr, locked, tlb, mem, snoop, dcacheline, blocked.
150
151 - symbol_daddr: name of data symbol being executed on at the time of sample
152 - dso_daddr: name of library or module containing the data being executed
153 on at the time of the sample
154 - locked: whether the bus was locked at the time of the sample
155 - tlb: type of tlb access for the data at the time of the sample
156 - mem: type of memory access for the data at the time of the sample
157 - snoop: type of snoop (if any) for the data at the time of the sample
158 - dcacheline: the cacheline the data address is on at the time of the sample
159 - phys_daddr: physical address of data being executed on at the time of sample
160 - data_page_size: the data page size of data being executed on at the time of sample
161 - blocked: reason of blocked load access for the data at the time of the sample
162
163 And the default sort keys are changed to local_weight, mem, sym, dso,
164 symbol_daddr, dso_daddr, snoop, tlb, locked, blocked, local_ins_lat,
165 see '--mem-mode'.
166
167 If the data file has tracepoint event(s), following (dynamic) sort keys
168 are also available:
169 trace, trace_fields, [<event>.]<field>[/raw]
170
171 - trace: pretty printed trace output in a single column
172 - trace_fields: fields in tracepoints in separate columns
173 - <field name>: optional event and field name for a specific field
174
175 The last form consists of event and field names. If event name is
176 omitted, it searches all events for matching field name. The matched
177 field will be shown only for the event has the field. The event name
178 supports substring match so user doesn't need to specify full subsystem
179 and event name everytime. For example, 'sched:sched_switch' event can
180 be shortened to 'switch' as long as it's not ambiguous. Also event can
181 be specified by its index (starting from 1) preceded by the '%'.
182 So '%1' is the first event, '%2' is the second, and so on.
183
184 The field name can have '/raw' suffix which disables pretty printing
185 and shows raw field value like hex numbers. The --raw-trace option
186 has the same effect for all dynamic sort keys.
187
188 The default sort keys are changed to 'trace' if all events in the data
189 file are tracepoint.
190
191-F::
192--fields=::
193 Specify output field - multiple keys can be specified in CSV format.
194 Following fields are available:
195 overhead, overhead_sys, overhead_us, overhead_children, sample and period.
196 Also it can contain any sort key(s).
197
198 By default, every sort keys not specified in -F will be appended
199 automatically.
200
201 If the keys starts with a prefix '+', then it will append the specified
202 field(s) to the default field order. For example: perf report -F +period,sample.
203
204-p::
205--parent=<regex>::
206 A regex filter to identify parent. The parent is a caller of this
207 function and searched through the callchain, thus it requires callchain
208 information recorded. The pattern is in the extended regex format and
209 defaults to "\^sys_|^do_page_fault", see '--sort parent'.
210
211-x::
212--exclude-other::
213 Only display entries with parent-match.
214
215-w::
216--column-widths=<width[,width...]>::
217 Force each column width to the provided list, for large terminal
218 readability. 0 means no limit (default behavior).
219
220-t::
221--field-separator=::
222 Use a special separator character and don't pad with spaces, replacing
223 all occurrences of this separator in symbol names (and other output)
224 with a '.' character, that thus it's the only non valid separator.
225
226-D::
227--dump-raw-trace::
228 Dump raw trace in ASCII.
229
230--disable-order::
231 Disable raw trace ordering.
232
233-g::
234--call-graph=<print_type,threshold[,print_limit],order,sort_key[,branch],value>::
235 Display call chains using type, min percent threshold, print limit,
236 call order, sort key, optional branch and value. Note that ordering
237 is not fixed so any parameter can be given in an arbitrary order.
238 One exception is the print_limit which should be preceded by threshold.
239
240 print_type can be either:
241 - flat: single column, linear exposure of call chains.
242 - graph: use a graph tree, displaying absolute overhead rates. (default)
243 - fractal: like graph, but displays relative rates. Each branch of
244 the tree is considered as a new profiled object.
245 - folded: call chains are displayed in a line, separated by semicolons
246 - none: disable call chain display.
247
248 threshold is a percentage value which specifies a minimum percent to be
249 included in the output call graph. Default is 0.5 (%).
250
251 print_limit is only applied when stdio interface is used. It's to limit
252 number of call graph entries in a single hist entry. Note that it needs
253 to be given after threshold (but not necessarily consecutive).
254 Default is 0 (unlimited).
255
256 order can be either:
257 - callee: callee based call graph.
258 - caller: inverted caller based call graph.
259 Default is 'caller' when --children is used, otherwise 'callee'.
260
261 sort_key can be:
262 - function: compare on functions (default)
263 - address: compare on individual code addresses
264 - srcline: compare on source filename and line number
265
266 branch can be:
267 - branch: include last branch information in callgraph when available.
268 Usually more convenient to use --branch-history for this.
269
270 value can be:
271 - percent: display overhead percent (default)
272 - period: display event period
273 - count: display event count
274
275--children::
276 Accumulate callchain of children to parent entry so that then can
277 show up in the output. The output will have a new "Children" column
278 and will be sorted on the data. It requires callchains are recorded.
279 See the `overhead calculation' section for more details. Enabled by
280 default, disable with --no-children.
281
282--max-stack::
283 Set the stack depth limit when parsing the callchain, anything
284 beyond the specified depth will be ignored. This is a trade-off
285 between information loss and faster processing especially for
286 workloads that can have a very long callchain stack.
287 Note that when using the --itrace option the synthesized callchain size
288 will override this value if the synthesized callchain size is bigger.
289
290 Default: 127
291
292-G::
293--inverted::
294 alias for inverted caller based call graph.
295
296--ignore-callees=<regex>::
297 Ignore callees of the function(s) matching the given regex.
298 This has the effect of collecting the callers of each such
299 function into one place in the call-graph tree.
300
301--pretty=<key>::
302 Pretty printing style. key: normal, raw
303
304--stdio:: Use the stdio interface.
305
306--stdio-color::
307 'always', 'never' or 'auto', allowing configuring color output
308 via the command line, in addition to via "color.ui" .perfconfig.
309 Use '--stdio-color always' to generate color even when redirecting
310 to a pipe or file. Using just '--stdio-color' is equivalent to
311 using 'always'.
312
313--tui:: Use the TUI interface, that is integrated with annotate and allows
314 zooming into DSOs or threads, among other features. Use of --tui
315 requires a tty, if one is not present, as when piping to other
316 commands, the stdio interface is used.
317
318--gtk:: Use the GTK2 interface.
319
320-k::
321--vmlinux=<file>::
322 vmlinux pathname
323
324--ignore-vmlinux::
325 Ignore vmlinux files.
326
327--kallsyms=<file>::
328 kallsyms pathname
329
330-m::
331--modules::
332 Load module symbols. WARNING: This should only be used with -k and
333 a LIVE kernel.
334
335-f::
336--force::
337 Don't do ownership validation.
338
339--symfs=<directory>::
340 Look for files with symbols relative to this directory.
341
342-C::
343--cpu:: Only report samples for the list of CPUs provided. Multiple CPUs can
344 be provided as a comma-separated list with no space: 0,1. Ranges of
345 CPUs are specified with -: 0-2. Default is to report samples on all
346 CPUs.
347
348-M::
349--disassembler-style=:: Set disassembler style for objdump.
350
351--source::
352 Interleave source code with assembly code. Enabled by default,
353 disable with --no-source.
354
355--asm-raw::
356 Show raw instruction encoding of assembly instructions.
357
358--show-total-period:: Show a column with the sum of periods.
359
360-I::
361--show-info::
362 Display extended information about the perf.data file. This adds
363 information which may be very large and thus may clutter the display.
364 It currently includes: cpu and numa topology of the host system.
365
366-b::
367--branch-stack::
368 Use the addresses of sampled taken branches instead of the instruction
369 address to build the histograms. To generate meaningful output, the
370 perf.data file must have been obtained using perf record -b or
371 perf record --branch-filter xxx where xxx is a branch filter option.
372 perf report is able to auto-detect whether a perf.data file contains
373 branch stacks and it will automatically switch to the branch view mode,
374 unless --no-branch-stack is used.
375
376--branch-history::
377 Add the addresses of sampled taken branches to the callstack.
378 This allows to examine the path the program took to each sample.
379 The data collection must have used -b (or -j) and -g.
380
381--objdump=<path>::
382 Path to objdump binary.
383
384--prefix=PREFIX::
385--prefix-strip=N::
386 Remove first N entries from source file path names in executables
387 and add PREFIX. This allows to display source code compiled on systems
388 with different file system layout.
389
390--group::
391 Show event group information together. It forces group output also
392 if there are no groups defined in data file.
393
394--group-sort-idx::
395 Sort the output by the event at the index n in group. If n is invalid,
396 sort by the first event. It can support multiple groups with different
397 amount of events. WARNING: This should be used on grouped events.
398
399--demangle::
400 Demangle symbol names to human readable form. It's enabled by default,
401 disable with --no-demangle.
402
403--demangle-kernel::
404 Demangle kernel symbol names to human readable form (for C++ kernels).
405
406--mem-mode::
407 Use the data addresses of samples in addition to instruction addresses
408 to build the histograms. To generate meaningful output, the perf.data
409 file must have been obtained using perf record -d -W and using a
410 special event -e cpu/mem-loads/p or -e cpu/mem-stores/p. See
411 'perf mem' for simpler access.
412
413--percent-limit::
414 Do not show entries which have an overhead under that percent.
415 (Default: 0). Note that this option also sets the percent limit (threshold)
416 of callchains. However the default value of callchain threshold is
417 different than the default value of hist entries. Please see the
418 --call-graph option for details.
419
420--percentage::
421 Determine how to display the overhead percentage of filtered entries.
422 Filters can be applied by --comms, --dsos and/or --symbols options and
423 Zoom operations on the TUI (thread, dso, etc).
424
425 "relative" means it's relative to filtered entries only so that the
426 sum of shown entries will be always 100%. "absolute" means it retains
427 the original value before and after the filter is applied.
428
429--header::
430 Show header information in the perf.data file. This includes
431 various information like hostname, OS and perf version, cpu/mem
432 info, perf command line, event list and so on. Currently only
433 --stdio output supports this feature.
434
435--header-only::
436 Show only perf.data header (forces --stdio).
437
438--time::
439 Only analyze samples within given time window: <start>,<stop>. Times
440 have the format seconds.nanoseconds. If start is not given (i.e. time
441 string is ',x.y') then analysis starts at the beginning of the file. If
442 stop time is not given (i.e. time string is 'x.y,') then analysis goes
443 to end of file. Multiple ranges can be separated by spaces, which
444 requires the argument to be quoted e.g. --time "1234.567,1234.789 1235,"
445
446 Also support time percent with multiple time ranges. Time string is
447 'a%/n,b%/m,...' or 'a%-b%,c%-%d,...'.
448
449 For example:
450 Select the second 10% time slice:
451
452 perf report --time 10%/2
453
454 Select from 0% to 10% time slice:
455
456 perf report --time 0%-10%
457
458 Select the first and second 10% time slices:
459
460 perf report --time 10%/1,10%/2
461
462 Select from 0% to 10% and 30% to 40% slices:
463
464 perf report --time 0%-10%,30%-40%
465
466--switch-on EVENT_NAME::
467 Only consider events after this event is found.
468
469 This may be interesting to measure a workload only after some initialization
470 phase is over, i.e. insert a perf probe at that point and then using this
471 option with that probe.
472
473--switch-off EVENT_NAME::
474 Stop considering events after this event is found.
475
476--show-on-off-events::
477 Show the --switch-on/off events too. This has no effect in 'perf report' now
478 but probably we'll make the default not to show the switch-on/off events
479 on the --group mode and if there is only one event besides the off/on ones,
480 go straight to the histogram browser, just like 'perf report' with no events
481 explicitly specified does.
482
483--itrace::
484 Options for decoding instruction tracing data. The options are:
485
486include::itrace.txt[]
487
488 To disable decoding entirely, use --no-itrace.
489
490--full-source-path::
491 Show the full path for source files for srcline output.
492
493--show-ref-call-graph::
494 When multiple events are sampled, it may not be needed to collect
495 callgraphs for all of them. The sample sites are usually nearby,
496 and it's enough to collect the callgraphs on a reference event.
497 So user can use "call-graph=no" event modifier to disable callgraph
498 for other events to reduce the overhead.
499 However, perf report cannot show callgraphs for the event which
500 disable the callgraph.
501 This option extends the perf report to show reference callgraphs,
502 which collected by reference event, in no callgraph event.
503
504--stitch-lbr::
505 Show callgraph with stitched LBRs, which may have more complete
506 callgraph. The perf.data file must have been obtained using
507 perf record --call-graph lbr.
508 Disabled by default. In common cases with call stack overflows,
509 it can recreate better call stacks than the default lbr call stack
510 output. But this approach is not full proof. There can be cases
511 where it creates incorrect call stacks from incorrect matches.
512 The known limitations include exception handing such as
513 setjmp/longjmp will have calls/returns not match.
514
515--socket-filter::
516 Only report the samples on the processor socket that match with this filter
517
518--samples=N::
519 Save N individual samples for each histogram entry to show context in perf
520 report tui browser.
521
522--raw-trace::
523 When displaying traceevent output, do not use print fmt or plugins.
524
525--hierarchy::
526 Enable hierarchical output.
527
528--inline::
529 If a callgraph address belongs to an inlined function, the inline stack
530 will be printed. Each entry is function name or file/line. Enabled by
531 default, disable with --no-inline.
532
533--mmaps::
534 Show --tasks output plus mmap information in a format similar to
535 /proc/<PID>/maps.
536
537 Please note that not all mmaps are stored, options affecting which ones
538 are include 'perf record --data', for instance.
539
540--ns::
541 Show time stamps in nanoseconds.
542
543--stats::
544 Display overall events statistics without any further processing.
545 (like the one at the end of the perf report -D command)
546
547--tasks::
548 Display monitored tasks stored in perf data. Displaying pid/tid/ppid
549 plus the command string aligned to distinguish parent and child tasks.
550
551--percent-type::
552 Set annotation percent type from following choices:
553 global-period, local-period, global-hits, local-hits
554
555 The local/global keywords set if the percentage is computed
556 in the scope of the function (local) or the whole data (global).
557 The period/hits keywords set the base the percentage is computed
558 on - the samples period or the number of samples (hits).
559
560--time-quantum::
561 Configure time quantum for time sort key. Default 100ms.
562 Accepts s, us, ms, ns units.
563
564--total-cycles::
565 When --total-cycles is specified, it supports sorting for all blocks by
566 'Sampled Cycles%'. This is useful to concentrate on the globally hottest
567 blocks. In output, there are some new columns:
568
569 'Sampled Cycles%' - block sampled cycles aggregation / total sampled cycles
570 'Sampled Cycles' - block sampled cycles aggregation
571 'Avg Cycles%' - block average sampled cycles / sum of total block average
572 sampled cycles
573 'Avg Cycles' - block average sampled cycles
574
575--skip-empty::
576 Do not print 0 results in the --stat output.
577
578include::callchain-overhead-calculation.txt[]
579
580SEE ALSO
581--------
582linkperf:perf-stat[1], linkperf:perf-annotate[1], linkperf:perf-record[1],
583linkperf:perf-intel-pt[1]