Loading...
1perf-report(1)
2==============
3
4NAME
5----
6perf-report - Read perf.data (created by perf record) and display the profile
7
8SYNOPSIS
9--------
10[verse]
11'perf report' [-i <file> | --input=file]
12
13DESCRIPTION
14-----------
15This command displays the performance counter profile information recorded
16via perf record.
17
18OPTIONS
19-------
20-i::
21--input=::
22 Input file name. (default: perf.data unless stdin is a fifo)
23
24-v::
25--verbose::
26 Be more verbose. (show symbol address, etc)
27
28-n::
29--show-nr-samples::
30 Show the number of samples for each symbol
31
32--show-cpu-utilization::
33 Show sample percentage for different cpu modes.
34
35-T::
36--threads::
37 Show per-thread event counters. The input data file should be recorded
38 with -s option.
39-c::
40--comms=::
41 Only consider symbols in these comms. CSV that understands
42 file://filename entries. This option will affect the percentage of
43 the overhead column. See --percentage for more info.
44--pid=::
45 Only show events for given process ID (comma separated list).
46
47--tid=::
48 Only show events for given thread ID (comma separated list).
49-d::
50--dsos=::
51 Only consider symbols in these dsos. CSV that understands
52 file://filename entries. This option will affect the percentage of
53 the overhead column. See --percentage for more info.
54-S::
55--symbols=::
56 Only consider these symbols. CSV that understands
57 file://filename entries. This option will affect the percentage of
58 the overhead column. See --percentage for more info.
59
60--symbol-filter=::
61 Only show symbols that match (partially) with this filter.
62
63-U::
64--hide-unresolved::
65 Only display entries resolved to a symbol.
66
67-s::
68--sort=::
69 Sort histogram entries by given key(s) - multiple keys can be specified
70 in CSV format. Following sort keys are available:
71 pid, comm, dso, symbol, parent, cpu, socket, srcline, weight, local_weight.
72
73 Each key has following meaning:
74
75 - comm: command (name) of the task which can be read via /proc/<pid>/comm
76 - pid: command and tid of the task
77 - dso: name of library or module executed at the time of sample
78 - symbol: name of function executed at the time of sample
79 - parent: name of function matched to the parent regex filter. Unmatched
80 entries are displayed as "[other]".
81 - cpu: cpu number the task ran at the time of sample
82 - socket: processor socket number the task ran at the time of sample
83 - srcline: filename and line number executed at the time of sample. The
84 DWARF debugging info must be provided.
85 - srcfile: file name of the source file of the same. Requires dwarf
86 information.
87 - weight: Event specific weight, e.g. memory latency or transaction
88 abort cost. This is the global weight.
89 - local_weight: Local weight version of the weight above.
90 - transaction: Transaction abort flags.
91 - overhead: Overhead percentage of sample
92 - overhead_sys: Overhead percentage of sample running in system mode
93 - overhead_us: Overhead percentage of sample running in user mode
94 - overhead_guest_sys: Overhead percentage of sample running in system mode
95 on guest machine
96 - overhead_guest_us: Overhead percentage of sample running in user mode on
97 guest machine
98 - sample: Number of sample
99 - period: Raw number of event count of sample
100
101 By default, comm, dso and symbol keys are used.
102 (i.e. --sort comm,dso,symbol)
103
104 If --branch-stack option is used, following sort keys are also
105 available:
106 dso_from, dso_to, symbol_from, symbol_to, mispredict.
107
108 - dso_from: name of library or module branched from
109 - dso_to: name of library or module branched to
110 - symbol_from: name of function branched from
111 - symbol_to: name of function branched to
112 - mispredict: "N" for predicted branch, "Y" for mispredicted branch
113 - in_tx: branch in TSX transaction
114 - abort: TSX transaction abort.
115 - cycles: Cycles in basic block
116
117 And default sort keys are changed to comm, dso_from, symbol_from, dso_to
118 and symbol_to, see '--branch-stack'.
119
120 If the --mem-mode option is used, the following sort keys are also available
121 (incompatible with --branch-stack):
122 symbol_daddr, dso_daddr, locked, tlb, mem, snoop, dcacheline.
123
124 - symbol_daddr: name of data symbol being executed on at the time of sample
125 - dso_daddr: name of library or module containing the data being executed
126 on at the time of the sample
127 - locked: whether the bus was locked at the time of the sample
128 - tlb: type of tlb access for the data at the time of the sample
129 - mem: type of memory access for the data at the time of the sample
130 - snoop: type of snoop (if any) for the data at the time of the sample
131 - dcacheline: the cacheline the data address is on at the time of the sample
132
133 And the default sort keys are changed to local_weight, mem, sym, dso,
134 symbol_daddr, dso_daddr, snoop, tlb, locked, see '--mem-mode'.
135
136 If the data file has tracepoint event(s), following (dynamic) sort keys
137 are also available:
138 trace, trace_fields, [<event>.]<field>[/raw]
139
140 - trace: pretty printed trace output in a single column
141 - trace_fields: fields in tracepoints in separate columns
142 - <field name>: optional event and field name for a specific field
143
144 The last form consists of event and field names. If event name is
145 omitted, it searches all events for matching field name. The matched
146 field will be shown only for the event has the field. The event name
147 supports substring match so user doesn't need to specify full subsystem
148 and event name everytime. For example, 'sched:sched_switch' event can
149 be shortened to 'switch' as long as it's not ambiguous. Also event can
150 be specified by its index (starting from 1) preceded by the '%'.
151 So '%1' is the first event, '%2' is the second, and so on.
152
153 The field name can have '/raw' suffix which disables pretty printing
154 and shows raw field value like hex numbers. The --raw-trace option
155 has the same effect for all dynamic sort keys.
156
157 The default sort keys are changed to 'trace' if all events in the data
158 file are tracepoint.
159
160-F::
161--fields=::
162 Specify output field - multiple keys can be specified in CSV format.
163 Following fields are available:
164 overhead, overhead_sys, overhead_us, overhead_children, sample and period.
165 Also it can contain any sort key(s).
166
167 By default, every sort keys not specified in -F will be appended
168 automatically.
169
170-p::
171--parent=<regex>::
172 A regex filter to identify parent. The parent is a caller of this
173 function and searched through the callchain, thus it requires callchain
174 information recorded. The pattern is in the exteneded regex format and
175 defaults to "\^sys_|^do_page_fault", see '--sort parent'.
176
177-x::
178--exclude-other::
179 Only display entries with parent-match.
180
181-w::
182--column-widths=<width[,width...]>::
183 Force each column width to the provided list, for large terminal
184 readability. 0 means no limit (default behavior).
185
186-t::
187--field-separator=::
188 Use a special separator character and don't pad with spaces, replacing
189 all occurrences of this separator in symbol names (and other output)
190 with a '.' character, that thus it's the only non valid separator.
191
192-D::
193--dump-raw-trace::
194 Dump raw trace in ASCII.
195
196-g::
197--call-graph=<print_type,threshold[,print_limit],order,sort_key[,branch],value>::
198 Display call chains using type, min percent threshold, print limit,
199 call order, sort key, optional branch and value. Note that ordering of
200 parameters is not fixed so any parement can be given in an arbitraty order.
201 One exception is the print_limit which should be preceded by threshold.
202
203 print_type can be either:
204 - flat: single column, linear exposure of call chains.
205 - graph: use a graph tree, displaying absolute overhead rates. (default)
206 - fractal: like graph, but displays relative rates. Each branch of
207 the tree is considered as a new profiled object.
208 - folded: call chains are displayed in a line, separated by semicolons
209 - none: disable call chain display.
210
211 threshold is a percentage value which specifies a minimum percent to be
212 included in the output call graph. Default is 0.5 (%).
213
214 print_limit is only applied when stdio interface is used. It's to limit
215 number of call graph entries in a single hist entry. Note that it needs
216 to be given after threshold (but not necessarily consecutive).
217 Default is 0 (unlimited).
218
219 order can be either:
220 - callee: callee based call graph.
221 - caller: inverted caller based call graph.
222 Default is 'caller' when --children is used, otherwise 'callee'.
223
224 sort_key can be:
225 - function: compare on functions (default)
226 - address: compare on individual code addresses
227
228 branch can be:
229 - branch: include last branch information in callgraph when available.
230 Usually more convenient to use --branch-history for this.
231
232 value can be:
233 - percent: diplay overhead percent (default)
234 - period: display event period
235 - count: display event count
236
237--children::
238 Accumulate callchain of children to parent entry so that then can
239 show up in the output. The output will have a new "Children" column
240 and will be sorted on the data. It requires callchains are recorded.
241 See the `overhead calculation' section for more details.
242
243--max-stack::
244 Set the stack depth limit when parsing the callchain, anything
245 beyond the specified depth will be ignored. This is a trade-off
246 between information loss and faster processing especially for
247 workloads that can have a very long callchain stack.
248 Note that when using the --itrace option the synthesized callchain size
249 will override this value if the synthesized callchain size is bigger.
250
251 Default: 127
252
253-G::
254--inverted::
255 alias for inverted caller based call graph.
256
257--ignore-callees=<regex>::
258 Ignore callees of the function(s) matching the given regex.
259 This has the effect of collecting the callers of each such
260 function into one place in the call-graph tree.
261
262--pretty=<key>::
263 Pretty printing style. key: normal, raw
264
265--stdio:: Use the stdio interface.
266
267--tui:: Use the TUI interface, that is integrated with annotate and allows
268 zooming into DSOs or threads, among other features. Use of --tui
269 requires a tty, if one is not present, as when piping to other
270 commands, the stdio interface is used.
271
272--gtk:: Use the GTK2 interface.
273
274-k::
275--vmlinux=<file>::
276 vmlinux pathname
277
278--kallsyms=<file>::
279 kallsyms pathname
280
281-m::
282--modules::
283 Load module symbols. WARNING: This should only be used with -k and
284 a LIVE kernel.
285
286-f::
287--force::
288 Don't complain, do it.
289
290--symfs=<directory>::
291 Look for files with symbols relative to this directory.
292
293-C::
294--cpu:: Only report samples for the list of CPUs provided. Multiple CPUs can
295 be provided as a comma-separated list with no space: 0,1. Ranges of
296 CPUs are specified with -: 0-2. Default is to report samples on all
297 CPUs.
298
299-M::
300--disassembler-style=:: Set disassembler style for objdump.
301
302--source::
303 Interleave source code with assembly code. Enabled by default,
304 disable with --no-source.
305
306--asm-raw::
307 Show raw instruction encoding of assembly instructions.
308
309--show-total-period:: Show a column with the sum of periods.
310
311-I::
312--show-info::
313 Display extended information about the perf.data file. This adds
314 information which may be very large and thus may clutter the display.
315 It currently includes: cpu and numa topology of the host system.
316
317-b::
318--branch-stack::
319 Use the addresses of sampled taken branches instead of the instruction
320 address to build the histograms. To generate meaningful output, the
321 perf.data file must have been obtained using perf record -b or
322 perf record --branch-filter xxx where xxx is a branch filter option.
323 perf report is able to auto-detect whether a perf.data file contains
324 branch stacks and it will automatically switch to the branch view mode,
325 unless --no-branch-stack is used.
326
327--branch-history::
328 Add the addresses of sampled taken branches to the callstack.
329 This allows to examine the path the program took to each sample.
330 The data collection must have used -b (or -j) and -g.
331
332--objdump=<path>::
333 Path to objdump binary.
334
335--group::
336 Show event group information together.
337
338--demangle::
339 Demangle symbol names to human readable form. It's enabled by default,
340 disable with --no-demangle.
341
342--demangle-kernel::
343 Demangle kernel symbol names to human readable form (for C++ kernels).
344
345--mem-mode::
346 Use the data addresses of samples in addition to instruction addresses
347 to build the histograms. To generate meaningful output, the perf.data
348 file must have been obtained using perf record -d -W and using a
349 special event -e cpu/mem-loads/ or -e cpu/mem-stores/. See
350 'perf mem' for simpler access.
351
352--percent-limit::
353 Do not show entries which have an overhead under that percent.
354 (Default: 0). Note that this option also sets the percent limit (threshold)
355 of callchains. However the default value of callchain threshold is
356 different than the default value of hist entries. Please see the
357 --call-graph option for details.
358
359--percentage::
360 Determine how to display the overhead percentage of filtered entries.
361 Filters can be applied by --comms, --dsos and/or --symbols options and
362 Zoom operations on the TUI (thread, dso, etc).
363
364 "relative" means it's relative to filtered entries only so that the
365 sum of shown entries will be always 100%. "absolute" means it retains
366 the original value before and after the filter is applied.
367
368--header::
369 Show header information in the perf.data file. This includes
370 various information like hostname, OS and perf version, cpu/mem
371 info, perf command line, event list and so on. Currently only
372 --stdio output supports this feature.
373
374--header-only::
375 Show only perf.data header (forces --stdio).
376
377--itrace::
378 Options for decoding instruction tracing data. The options are:
379
380include::itrace.txt[]
381
382 To disable decoding entirely, use --no-itrace.
383
384--full-source-path::
385 Show the full path for source files for srcline output.
386
387--show-ref-call-graph::
388 When multiple events are sampled, it may not be needed to collect
389 callgraphs for all of them. The sample sites are usually nearby,
390 and it's enough to collect the callgraphs on a reference event.
391 So user can use "call-graph=no" event modifier to disable callgraph
392 for other events to reduce the overhead.
393 However, perf report cannot show callgraphs for the event which
394 disable the callgraph.
395 This option extends the perf report to show reference callgraphs,
396 which collected by reference event, in no callgraph event.
397
398--socket-filter::
399 Only report the samples on the processor socket that match with this filter
400
401--raw-trace::
402 When displaying traceevent output, do not use print fmt or plugins.
403
404--hierarchy::
405 Enable hierarchical output.
406
407include::callchain-overhead-calculation.txt[]
408
409SEE ALSO
410--------
411linkperf:perf-stat[1], linkperf:perf-annotate[1]
1perf-report(1)
2==============
3
4NAME
5----
6perf-report - Read perf.data (created by perf record) and display the profile
7
8SYNOPSIS
9--------
10[verse]
11'perf report' [-i <file> | --input=file]
12
13DESCRIPTION
14-----------
15This command displays the performance counter profile information recorded
16via perf record.
17
18OPTIONS
19-------
20-i::
21--input=::
22 Input file name. (default: perf.data unless stdin is a fifo)
23
24-v::
25--verbose::
26 Be more verbose. (show symbol address, etc)
27
28-q::
29--quiet::
30 Do not show any warnings or messages. (Suppress -v)
31
32-n::
33--show-nr-samples::
34 Show the number of samples for each symbol
35
36--show-cpu-utilization::
37 Show sample percentage for different cpu modes.
38
39-T::
40--threads::
41 Show per-thread event counters. The input data file should be recorded
42 with -s option.
43-c::
44--comms=::
45 Only consider symbols in these comms. CSV that understands
46 file://filename entries. This option will affect the percentage of
47 the overhead column. See --percentage for more info.
48--pid=::
49 Only show events for given process ID (comma separated list).
50
51--tid=::
52 Only show events for given thread ID (comma separated list).
53-d::
54--dsos=::
55 Only consider symbols in these dsos. CSV that understands
56 file://filename entries. This option will affect the percentage of
57 the overhead column. See --percentage for more info.
58-S::
59--symbols=::
60 Only consider these symbols. CSV that understands
61 file://filename entries. This option will affect the percentage of
62 the overhead column. See --percentage for more info.
63
64--symbol-filter=::
65 Only show symbols that match (partially) with this filter.
66
67-U::
68--hide-unresolved::
69 Only display entries resolved to a symbol.
70
71-s::
72--sort=::
73 Sort histogram entries by given key(s) - multiple keys can be specified
74 in CSV format. Following sort keys are available:
75 pid, comm, dso, symbol, parent, cpu, socket, srcline, weight,
76 local_weight, cgroup_id, addr.
77
78 Each key has following meaning:
79
80 - comm: command (name) of the task which can be read via /proc/<pid>/comm
81 - pid: command and tid of the task
82 - dso: name of library or module executed at the time of sample
83 - dso_size: size of library or module executed at the time of sample
84 - symbol: name of function executed at the time of sample
85 - symbol_size: size of function executed at the time of sample
86 - parent: name of function matched to the parent regex filter. Unmatched
87 entries are displayed as "[other]".
88 - cpu: cpu number the task ran at the time of sample
89 - socket: processor socket number the task ran at the time of sample
90 - srcline: filename and line number executed at the time of sample. The
91 DWARF debugging info must be provided.
92 - srcfile: file name of the source file of the samples. Requires dwarf
93 information.
94 - weight: Event specific weight, e.g. memory latency or transaction
95 abort cost. This is the global weight.
96 - local_weight: Local weight version of the weight above.
97 - cgroup_id: ID derived from cgroup namespace device and inode numbers.
98 - cgroup: cgroup pathname in the cgroupfs.
99 - transaction: Transaction abort flags.
100 - overhead: Overhead percentage of sample
101 - overhead_sys: Overhead percentage of sample running in system mode
102 - overhead_us: Overhead percentage of sample running in user mode
103 - overhead_guest_sys: Overhead percentage of sample running in system mode
104 on guest machine
105 - overhead_guest_us: Overhead percentage of sample running in user mode on
106 guest machine
107 - sample: Number of sample
108 - period: Raw number of event count of sample
109 - time: Separate the samples by time stamp with the resolution specified by
110 --time-quantum (default 100ms). Specify with overhead and before it.
111 - code_page_size: the code page size of sampled code address (ip)
112 - ins_lat: Instruction latency in core cycles. This is the global instruction
113 latency
114 - local_ins_lat: Local instruction latency version
115 - p_stage_cyc: On powerpc, this presents the number of cycles spent in a
116 pipeline stage. And currently supported only on powerpc.
117 - addr: (Full) virtual address of the sampled instruction
118 - retire_lat: On X86, this reports pipeline stall of this instruction compared
119 to the previous instruction in cycles. And currently supported only on X86
120 - simd: Flags describing a SIMD operation. "e" for empty Arm SVE predicate. "p" for partial Arm SVE predicate
121 - type: Data type of sample memory access.
122 - typeoff: Offset in the data type of sample memory access.
123 - symoff: Offset in the symbol.
124
125 By default, comm, dso and symbol keys are used.
126 (i.e. --sort comm,dso,symbol)
127
128 If --branch-stack option is used, following sort keys are also
129 available:
130
131 - dso_from: name of library or module branched from
132 - dso_to: name of library or module branched to
133 - symbol_from: name of function branched from
134 - symbol_to: name of function branched to
135 - srcline_from: source file and line branched from
136 - srcline_to: source file and line branched to
137 - mispredict: "N" for predicted branch, "Y" for mispredicted branch
138 - in_tx: branch in TSX transaction
139 - abort: TSX transaction abort.
140 - cycles: Cycles in basic block
141
142 And default sort keys are changed to comm, dso_from, symbol_from, dso_to
143 and symbol_to, see '--branch-stack'.
144
145 When the sort key symbol is specified, columns "IPC" and "IPC Coverage"
146 are enabled automatically. Column "IPC" reports the average IPC per function
147 and column "IPC coverage" reports the percentage of instructions with
148 sampled IPC in this function. IPC means Instruction Per Cycle. If it's low,
149 it indicates there may be a performance bottleneck when the function is
150 executed, such as a memory access bottleneck. If a function has high overhead
151 and low IPC, it's worth further analyzing it to optimize its performance.
152
153 If the --mem-mode option is used, the following sort keys are also available
154 (incompatible with --branch-stack):
155 symbol_daddr, dso_daddr, locked, tlb, mem, snoop, dcacheline, blocked.
156
157 - symbol_daddr: name of data symbol being executed on at the time of sample
158 - dso_daddr: name of library or module containing the data being executed
159 on at the time of the sample
160 - locked: whether the bus was locked at the time of the sample
161 - tlb: type of tlb access for the data at the time of the sample
162 - mem: type of memory access for the data at the time of the sample
163 - snoop: type of snoop (if any) for the data at the time of the sample
164 - dcacheline: the cacheline the data address is on at the time of the sample
165 - phys_daddr: physical address of data being executed on at the time of sample
166 - data_page_size: the data page size of data being executed on at the time of sample
167 - blocked: reason of blocked load access for the data at the time of the sample
168
169 And the default sort keys are changed to local_weight, mem, sym, dso,
170 symbol_daddr, dso_daddr, snoop, tlb, locked, blocked, local_ins_lat,
171 see '--mem-mode'.
172
173 If the data file has tracepoint event(s), following (dynamic) sort keys
174 are also available:
175 trace, trace_fields, [<event>.]<field>[/raw]
176
177 - trace: pretty printed trace output in a single column
178 - trace_fields: fields in tracepoints in separate columns
179 - <field name>: optional event and field name for a specific field
180
181 The last form consists of event and field names. If event name is
182 omitted, it searches all events for matching field name. The matched
183 field will be shown only for the event has the field. The event name
184 supports substring match so user doesn't need to specify full subsystem
185 and event name everytime. For example, 'sched:sched_switch' event can
186 be shortened to 'switch' as long as it's not ambiguous. Also event can
187 be specified by its index (starting from 1) preceded by the '%'.
188 So '%1' is the first event, '%2' is the second, and so on.
189
190 The field name can have '/raw' suffix which disables pretty printing
191 and shows raw field value like hex numbers. The --raw-trace option
192 has the same effect for all dynamic sort keys.
193
194 The default sort keys are changed to 'trace' if all events in the data
195 file are tracepoint.
196
197-F::
198--fields=::
199 Specify output field - multiple keys can be specified in CSV format.
200 Following fields are available:
201 overhead, overhead_sys, overhead_us, overhead_children, sample and period.
202 Also it can contain any sort key(s).
203
204 By default, every sort keys not specified in -F will be appended
205 automatically.
206
207 If the keys starts with a prefix '+', then it will append the specified
208 field(s) to the default field order. For example: perf report -F +period,sample.
209
210-p::
211--parent=<regex>::
212 A regex filter to identify parent. The parent is a caller of this
213 function and searched through the callchain, thus it requires callchain
214 information recorded. The pattern is in the extended regex format and
215 defaults to "\^sys_|^do_page_fault", see '--sort parent'.
216
217-x::
218--exclude-other::
219 Only display entries with parent-match.
220
221-w::
222--column-widths=<width[,width...]>::
223 Force each column width to the provided list, for large terminal
224 readability. 0 means no limit (default behavior).
225
226-t::
227--field-separator=::
228 Use a special separator character and don't pad with spaces, replacing
229 all occurrences of this separator in symbol names (and other output)
230 with a '.' character, that thus it's the only non valid separator.
231
232-D::
233--dump-raw-trace::
234 Dump raw trace in ASCII.
235
236--disable-order::
237 Disable raw trace ordering.
238
239-g::
240--call-graph=<print_type,threshold[,print_limit],order,sort_key[,branch],value>::
241 Display call chains using type, min percent threshold, print limit,
242 call order, sort key, optional branch and value. Note that ordering
243 is not fixed so any parameter can be given in an arbitrary order.
244 One exception is the print_limit which should be preceded by threshold.
245
246 print_type can be either:
247 - flat: single column, linear exposure of call chains.
248 - graph: use a graph tree, displaying absolute overhead rates. (default)
249 - fractal: like graph, but displays relative rates. Each branch of
250 the tree is considered as a new profiled object.
251 - folded: call chains are displayed in a line, separated by semicolons
252 - none: disable call chain display.
253
254 threshold is a percentage value which specifies a minimum percent to be
255 included in the output call graph. Default is 0.5 (%).
256
257 print_limit is only applied when stdio interface is used. It's to limit
258 number of call graph entries in a single hist entry. Note that it needs
259 to be given after threshold (but not necessarily consecutive).
260 Default is 0 (unlimited).
261
262 order can be either:
263 - callee: callee based call graph.
264 - caller: inverted caller based call graph.
265 Default is 'caller' when --children is used, otherwise 'callee'.
266
267 sort_key can be:
268 - function: compare on functions (default)
269 - address: compare on individual code addresses
270 - srcline: compare on source filename and line number
271
272 branch can be:
273 - branch: include last branch information in callgraph when available.
274 Usually more convenient to use --branch-history for this.
275
276 value can be:
277 - percent: display overhead percent (default)
278 - period: display event period
279 - count: display event count
280
281--children::
282 Accumulate callchain of children to parent entry so that then can
283 show up in the output. The output will have a new "Children" column
284 and will be sorted on the data. It requires callchains are recorded.
285 See the `overhead calculation' section for more details. Enabled by
286 default, disable with --no-children.
287
288--max-stack::
289 Set the stack depth limit when parsing the callchain, anything
290 beyond the specified depth will be ignored. This is a trade-off
291 between information loss and faster processing especially for
292 workloads that can have a very long callchain stack.
293 Note that when using the --itrace option the synthesized callchain size
294 will override this value if the synthesized callchain size is bigger.
295
296 Default: 127
297
298-G::
299--inverted::
300 alias for inverted caller based call graph.
301
302--ignore-callees=<regex>::
303 Ignore callees of the function(s) matching the given regex.
304 This has the effect of collecting the callers of each such
305 function into one place in the call-graph tree.
306
307--pretty=<key>::
308 Pretty printing style. key: normal, raw
309
310--stdio:: Use the stdio interface.
311
312--stdio-color::
313 'always', 'never' or 'auto', allowing configuring color output
314 via the command line, in addition to via "color.ui" .perfconfig.
315 Use '--stdio-color always' to generate color even when redirecting
316 to a pipe or file. Using just '--stdio-color' is equivalent to
317 using 'always'.
318
319--tui:: Use the TUI interface, that is integrated with annotate and allows
320 zooming into DSOs or threads, among other features. Use of --tui
321 requires a tty, if one is not present, as when piping to other
322 commands, the stdio interface is used.
323
324--gtk:: Use the GTK2 interface.
325
326-k::
327--vmlinux=<file>::
328 vmlinux pathname
329
330--ignore-vmlinux::
331 Ignore vmlinux files.
332
333--kallsyms=<file>::
334 kallsyms pathname
335
336-m::
337--modules::
338 Load module symbols. WARNING: This should only be used with -k and
339 a LIVE kernel.
340
341-f::
342--force::
343 Don't do ownership validation.
344
345--symfs=<directory>::
346 Look for files with symbols relative to this directory.
347
348-C::
349--cpu:: Only report samples for the list of CPUs provided. Multiple CPUs can
350 be provided as a comma-separated list with no space: 0,1. Ranges of
351 CPUs are specified with -: 0-2. Default is to report samples on all
352 CPUs.
353
354-M::
355--disassembler-style=:: Set disassembler style for objdump.
356
357--source::
358 Interleave source code with assembly code. Enabled by default,
359 disable with --no-source.
360
361--asm-raw::
362 Show raw instruction encoding of assembly instructions.
363
364--show-total-period:: Show a column with the sum of periods.
365
366-I::
367--show-info::
368 Display extended information about the perf.data file. This adds
369 information which may be very large and thus may clutter the display.
370 It currently includes: cpu and numa topology of the host system.
371
372-b::
373--branch-stack::
374 Use the addresses of sampled taken branches instead of the instruction
375 address to build the histograms. To generate meaningful output, the
376 perf.data file must have been obtained using perf record -b or
377 perf record --branch-filter xxx where xxx is a branch filter option.
378 perf report is able to auto-detect whether a perf.data file contains
379 branch stacks and it will automatically switch to the branch view mode,
380 unless --no-branch-stack is used.
381
382--branch-history::
383 Add the addresses of sampled taken branches to the callstack.
384 This allows to examine the path the program took to each sample.
385 The data collection must have used -b (or -j) and -g.
386
387--addr2line=<path>::
388 Path to addr2line binary.
389
390--objdump=<path>::
391 Path to objdump binary.
392
393--prefix=PREFIX::
394--prefix-strip=N::
395 Remove first N entries from source file path names in executables
396 and add PREFIX. This allows to display source code compiled on systems
397 with different file system layout.
398
399--group::
400 Show event group information together. It forces group output also
401 if there are no groups defined in data file.
402
403--group-sort-idx::
404 Sort the output by the event at the index n in group. If n is invalid,
405 sort by the first event. It can support multiple groups with different
406 amount of events. WARNING: This should be used on grouped events.
407
408--demangle::
409 Demangle symbol names to human readable form. It's enabled by default,
410 disable with --no-demangle.
411
412--demangle-kernel::
413 Demangle kernel symbol names to human readable form (for C++ kernels).
414
415--mem-mode::
416 Use the data addresses of samples in addition to instruction addresses
417 to build the histograms. To generate meaningful output, the perf.data
418 file must have been obtained using perf record -d -W and using a
419 special event -e cpu/mem-loads/p or -e cpu/mem-stores/p. See
420 'perf mem' for simpler access.
421
422--percent-limit::
423 Do not show entries which have an overhead under that percent.
424 (Default: 0). Note that this option also sets the percent limit (threshold)
425 of callchains. However the default value of callchain threshold is
426 different than the default value of hist entries. Please see the
427 --call-graph option for details.
428
429--percentage::
430 Determine how to display the overhead percentage of filtered entries.
431 Filters can be applied by --comms, --dsos and/or --symbols options and
432 Zoom operations on the TUI (thread, dso, etc).
433
434 "relative" means it's relative to filtered entries only so that the
435 sum of shown entries will be always 100%. "absolute" means it retains
436 the original value before and after the filter is applied.
437
438--header::
439 Show header information in the perf.data file. This includes
440 various information like hostname, OS and perf version, cpu/mem
441 info, perf command line, event list and so on. Currently only
442 --stdio output supports this feature.
443
444--header-only::
445 Show only perf.data header (forces --stdio).
446
447--time::
448 Only analyze samples within given time window: <start>,<stop>. Times
449 have the format seconds.nanoseconds. If start is not given (i.e. time
450 string is ',x.y') then analysis starts at the beginning of the file. If
451 stop time is not given (i.e. time string is 'x.y,') then analysis goes
452 to end of file. Multiple ranges can be separated by spaces, which
453 requires the argument to be quoted e.g. --time "1234.567,1234.789 1235,"
454
455 Also support time percent with multiple time ranges. Time string is
456 'a%/n,b%/m,...' or 'a%-b%,c%-%d,...'.
457
458 For example:
459 Select the second 10% time slice:
460
461 perf report --time 10%/2
462
463 Select from 0% to 10% time slice:
464
465 perf report --time 0%-10%
466
467 Select the first and second 10% time slices:
468
469 perf report --time 10%/1,10%/2
470
471 Select from 0% to 10% and 30% to 40% slices:
472
473 perf report --time 0%-10%,30%-40%
474
475--switch-on EVENT_NAME::
476 Only consider events after this event is found.
477
478 This may be interesting to measure a workload only after some initialization
479 phase is over, i.e. insert a perf probe at that point and then using this
480 option with that probe.
481
482--switch-off EVENT_NAME::
483 Stop considering events after this event is found.
484
485--show-on-off-events::
486 Show the --switch-on/off events too. This has no effect in 'perf report' now
487 but probably we'll make the default not to show the switch-on/off events
488 on the --group mode and if there is only one event besides the off/on ones,
489 go straight to the histogram browser, just like 'perf report' with no events
490 explicitly specified does.
491
492--itrace::
493 Options for decoding instruction tracing data. The options are:
494
495include::itrace.txt[]
496
497 To disable decoding entirely, use --no-itrace.
498
499--full-source-path::
500 Show the full path for source files for srcline output.
501
502--show-ref-call-graph::
503 When multiple events are sampled, it may not be needed to collect
504 callgraphs for all of them. The sample sites are usually nearby,
505 and it's enough to collect the callgraphs on a reference event.
506 So user can use "call-graph=no" event modifier to disable callgraph
507 for other events to reduce the overhead.
508 However, perf report cannot show callgraphs for the event which
509 disable the callgraph.
510 This option extends the perf report to show reference callgraphs,
511 which collected by reference event, in no callgraph event.
512
513--stitch-lbr::
514 Show callgraph with stitched LBRs, which may have more complete
515 callgraph. The perf.data file must have been obtained using
516 perf record --call-graph lbr.
517 Disabled by default. In common cases with call stack overflows,
518 it can recreate better call stacks than the default lbr call stack
519 output. But this approach is not foolproof. There can be cases
520 where it creates incorrect call stacks from incorrect matches.
521 The known limitations include exception handing such as
522 setjmp/longjmp will have calls/returns not match.
523
524--socket-filter::
525 Only report the samples on the processor socket that match with this filter
526
527--samples=N::
528 Save N individual samples for each histogram entry to show context in perf
529 report tui browser.
530
531--raw-trace::
532 When displaying traceevent output, do not use print fmt or plugins.
533
534--hierarchy::
535 Enable hierarchical output.
536
537--inline::
538 If a callgraph address belongs to an inlined function, the inline stack
539 will be printed. Each entry is function name or file/line. Enabled by
540 default, disable with --no-inline.
541
542--mmaps::
543 Show --tasks output plus mmap information in a format similar to
544 /proc/<PID>/maps.
545
546 Please note that not all mmaps are stored, options affecting which ones
547 are include 'perf record --data', for instance.
548
549--ns::
550 Show time stamps in nanoseconds.
551
552--stats::
553 Display overall events statistics without any further processing.
554 (like the one at the end of the perf report -D command)
555
556--tasks::
557 Display monitored tasks stored in perf data. Displaying pid/tid/ppid
558 plus the command string aligned to distinguish parent and child tasks.
559
560--percent-type::
561 Set annotation percent type from following choices:
562 global-period, local-period, global-hits, local-hits
563
564 The local/global keywords set if the percentage is computed
565 in the scope of the function (local) or the whole data (global).
566 The period/hits keywords set the base the percentage is computed
567 on - the samples period or the number of samples (hits).
568
569--time-quantum::
570 Configure time quantum for time sort key. Default 100ms.
571 Accepts s, us, ms, ns units.
572
573--total-cycles::
574 When --total-cycles is specified, it supports sorting for all blocks by
575 'Sampled Cycles%'. This is useful to concentrate on the globally hottest
576 blocks. In output, there are some new columns:
577
578 'Sampled Cycles%' - block sampled cycles aggregation / total sampled cycles
579 'Sampled Cycles' - block sampled cycles aggregation
580 'Avg Cycles%' - block average sampled cycles / sum of total block average
581 sampled cycles
582 'Avg Cycles' - block average sampled cycles
583
584--skip-empty::
585 Do not print 0 results in the --stat output.
586
587include::callchain-overhead-calculation.txt[]
588
589SEE ALSO
590--------
591linkperf:perf-stat[1], linkperf:perf-annotate[1], linkperf:perf-record[1],
592linkperf:perf-intel-pt[1]