Loading...
1#
2# USB Host Controller Drivers
3#
4comment "USB Host Controller Drivers"
5
6config USB_C67X00_HCD
7 tristate "Cypress C67x00 HCD support"
8 depends on HAS_IOMEM
9 help
10 The Cypress C67x00 (EZ-Host/EZ-OTG) chips are dual-role
11 host/peripheral/OTG USB controllers.
12
13 Enable this option to support this chip in host controller mode.
14 If unsure, say N.
15
16 To compile this driver as a module, choose M here: the
17 module will be called c67x00.
18
19config USB_XHCI_HCD
20 tristate "xHCI HCD (USB 3.0) support"
21 depends on HAS_DMA && HAS_IOMEM
22 ---help---
23 The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
24 "SuperSpeed" host controller hardware.
25
26 To compile this driver as a module, choose M here: the
27 module will be called xhci-hcd.
28
29if USB_XHCI_HCD
30
31config USB_XHCI_PCI
32 tristate
33 depends on PCI
34 default y
35
36config USB_XHCI_PLATFORM
37 tristate "Generic xHCI driver for a platform device"
38 ---help---
39 Adds an xHCI host driver for a generic platform device, which
40 provides a memory space and an irq.
41 It is also a prerequisite for platform specific drivers that
42 implement some extra quirks.
43
44 If unsure, say N.
45
46config USB_XHCI_MTK
47 tristate "xHCI support for Mediatek MT65xx"
48 select MFD_SYSCON
49 depends on ARCH_MEDIATEK || COMPILE_TEST
50 ---help---
51 Say 'Y' to enable the support for the xHCI host controller
52 found in Mediatek MT65xx SoCs.
53 If unsure, say N.
54
55config USB_XHCI_MVEBU
56 tristate "xHCI support for Marvell Armada 375/38x"
57 select USB_XHCI_PLATFORM
58 depends on HAS_IOMEM
59 depends on ARCH_MVEBU || COMPILE_TEST
60 ---help---
61 Say 'Y' to enable the support for the xHCI host controller
62 found in Marvell Armada 375/38x ARM SOCs.
63
64config USB_XHCI_RCAR
65 tristate "xHCI support for Renesas R-Car SoCs"
66 select USB_XHCI_PLATFORM
67 depends on ARCH_RENESAS || COMPILE_TEST
68 ---help---
69 Say 'Y' to enable the support for the xHCI host controller
70 found in Renesas R-Car ARM SoCs.
71
72endif # USB_XHCI_HCD
73
74config USB_EHCI_HCD
75 tristate "EHCI HCD (USB 2.0) support"
76 depends on HAS_DMA && HAS_IOMEM
77 ---help---
78 The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
79 "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
80 If your USB host controller supports USB 2.0, you will likely want to
81 configure this Host Controller Driver.
82
83 EHCI controllers are packaged with "companion" host controllers (OHCI
84 or UHCI) to handle USB 1.1 devices connected to root hub ports. Ports
85 will connect to EHCI if the device is high speed, otherwise they
86 connect to a companion controller. If you configure EHCI, you should
87 probably configure the OHCI (for NEC and some other vendors) USB Host
88 Controller Driver or UHCI (for Via motherboards) Host Controller
89 Driver too.
90
91 You may want to read <file:Documentation/usb/ehci.txt>.
92
93 To compile this driver as a module, choose M here: the
94 module will be called ehci-hcd.
95
96config USB_EHCI_ROOT_HUB_TT
97 bool "Root Hub Transaction Translators"
98 depends on USB_EHCI_HCD
99 ---help---
100 Some EHCI chips have vendor-specific extensions to integrate
101 transaction translators, so that no OHCI or UHCI companion
102 controller is needed. It's safe to say "y" even if your
103 controller doesn't support this feature.
104
105 This supports the EHCI implementation that's originally
106 from ARC, and has since changed hands a few times.
107
108config USB_EHCI_TT_NEWSCHED
109 bool "Improved Transaction Translator scheduling"
110 depends on USB_EHCI_HCD
111 default y
112 ---help---
113 This changes the periodic scheduling code to fill more of the low
114 and full speed bandwidth available from the Transaction Translator
115 (TT) in USB 2.0 hubs. Without this, only one transfer will be
116 issued in each microframe, significantly reducing the number of
117 periodic low/fullspeed transfers possible.
118
119 If you have multiple periodic low/fullspeed devices connected to a
120 highspeed USB hub which is connected to a highspeed USB Host
121 Controller, and some of those devices will not work correctly
122 (possibly due to "ENOSPC" or "-28" errors), say Y. Conversely, if
123 you have only one such device and it doesn't work, you could try
124 saying N.
125
126 If unsure, say Y.
127
128if USB_EHCI_HCD
129
130config USB_EHCI_PCI
131 tristate
132 depends on PCI
133 default y
134
135config USB_EHCI_HCD_PMC_MSP
136 tristate "EHCI support for on-chip PMC MSP71xx USB controller"
137 depends on MSP_HAS_USB
138 default n
139 select USB_EHCI_BIG_ENDIAN_DESC
140 select USB_EHCI_BIG_ENDIAN_MMIO
141 ---help---
142 Enables support for the onchip USB controller on the PMC_MSP7100 Family SoC's.
143 If unsure, say N.
144
145config XPS_USB_HCD_XILINX
146 bool "Use Xilinx usb host EHCI controller core"
147 depends on (PPC32 || MICROBLAZE)
148 select USB_EHCI_BIG_ENDIAN_DESC
149 select USB_EHCI_BIG_ENDIAN_MMIO
150 ---help---
151 Xilinx xps USB host controller core is EHCI compliant and has
152 transaction translator built-in. It can be configured to either
153 support both high speed and full speed devices, or high speed
154 devices only.
155
156config USB_EHCI_FSL
157 tristate "Support for Freescale PPC on-chip EHCI USB controller"
158 depends on FSL_SOC
159 select USB_EHCI_ROOT_HUB_TT
160 ---help---
161 Variation of ARC USB block used in some Freescale chips.
162
163config USB_EHCI_MXC
164 tristate "Support for Freescale i.MX on-chip EHCI USB controller"
165 depends on ARCH_MXC
166 select USB_EHCI_ROOT_HUB_TT
167 ---help---
168 Variation of ARC USB block used in some Freescale chips.
169
170config USB_EHCI_HCD_OMAP
171 tristate "EHCI support for OMAP3 and later chips"
172 depends on ARCH_OMAP
173 select NOP_USB_XCEIV
174 default y
175 ---help---
176 Enables support for the on-chip EHCI controller on
177 OMAP3 and later chips.
178
179config USB_EHCI_HCD_ORION
180 tristate "Support for Marvell EBU on-chip EHCI USB controller"
181 depends on USB_EHCI_HCD && PLAT_ORION
182 default y
183 ---help---
184 Enables support for the on-chip EHCI controller on Marvell's
185 embedded ARM SoCs, including Orion, Kirkwood, Dove, Armada XP,
186 Armada 370. This is different from the EHCI implementation
187 on Marvell's mobile PXA and MMP SoC, see "EHCI support for
188 Marvell PXA/MMP USB controller" for those.
189
190config USB_EHCI_HCD_SPEAR
191 tristate "Support for ST SPEAr on-chip EHCI USB controller"
192 depends on USB_EHCI_HCD && PLAT_SPEAR
193 default y
194 ---help---
195 Enables support for the on-chip EHCI controller on
196 ST SPEAr chips.
197
198config USB_EHCI_HCD_STI
199 tristate "Support for ST STiHxxx on-chip EHCI USB controller"
200 depends on ARCH_STI && OF
201 select GENERIC_PHY
202 select USB_EHCI_HCD_PLATFORM
203 help
204 Enable support for the on-chip EHCI controller found on
205 STMicroelectronics consumer electronics SoC's.
206
207config USB_EHCI_HCD_AT91
208 tristate "Support for Atmel on-chip EHCI USB controller"
209 depends on USB_EHCI_HCD && ARCH_AT91
210 default y
211 ---help---
212 Enables support for the on-chip EHCI controller on
213 Atmel chips.
214
215config USB_EHCI_MSM
216 tristate "Support for Qualcomm QSD/MSM on-chip EHCI USB controller"
217 depends on ARCH_QCOM
218 select USB_EHCI_ROOT_HUB_TT
219 ---help---
220 Enables support for the USB Host controller present on the
221 Qualcomm chipsets. Root Hub has inbuilt TT.
222 This driver depends on OTG driver for PHY initialization,
223 clock management, powering up VBUS, and power management.
224 This driver is not supported on boards like trout which
225 has an external PHY.
226
227config USB_EHCI_TEGRA
228 tristate "NVIDIA Tegra HCD support"
229 depends on ARCH_TEGRA
230 select USB_EHCI_ROOT_HUB_TT
231 select USB_PHY
232 select USB_ULPI
233 select USB_ULPI_VIEWPORT
234 help
235 This driver enables support for the internal USB Host Controllers
236 found in NVIDIA Tegra SoCs. The controllers are EHCI compliant.
237
238config USB_EHCI_HCD_PPC_OF
239 bool "EHCI support for PPC USB controller on OF platform bus"
240 depends on PPC
241 default y
242 ---help---
243 Enables support for the USB controller present on the PowerPC
244 OpenFirmware platform bus.
245
246config USB_EHCI_SH
247 bool "EHCI support for SuperH USB controller"
248 depends on SUPERH
249 ---help---
250 Enables support for the on-chip EHCI controller on the SuperH.
251 If you use the PCI EHCI controller, this option is not necessary.
252
253config USB_EHCI_EXYNOS
254 tristate "EHCI support for Samsung S5P/EXYNOS SoC Series"
255 depends on ARCH_S5PV210 || ARCH_EXYNOS
256 help
257 Enable support for the Samsung Exynos SOC's on-chip EHCI controller.
258
259config USB_EHCI_MV
260 bool "EHCI support for Marvell PXA/MMP USB controller"
261 depends on (ARCH_PXA || ARCH_MMP)
262 select USB_EHCI_ROOT_HUB_TT
263 ---help---
264 Enables support for Marvell (including PXA and MMP series) on-chip
265 USB SPH and OTG controller. SPH is a single port host, and it can
266 only be EHCI host. OTG is controller that can switch to host mode.
267 Note that this driver will not work on Marvell's other EHCI
268 controller used by the EBU-type SoCs including Orion, Kirkwood,
269 Dova, Armada 370 and Armada XP. See "Support for Marvell EBU
270 on-chip EHCI USB controller" for those.
271
272config USB_W90X900_EHCI
273 tristate "W90X900(W90P910) EHCI support"
274 depends on ARCH_W90X900
275 ---help---
276 Enables support for the W90X900 USB controller
277
278config USB_CNS3XXX_EHCI
279 bool "Cavium CNS3XXX EHCI Module (DEPRECATED)"
280 depends on ARCH_CNS3XXX
281 select USB_EHCI_HCD_PLATFORM
282 ---help---
283 This option is deprecated now and the driver was removed, use
284 USB_EHCI_HCD_PLATFORM instead.
285
286 Enable support for the CNS3XXX SOC's on-chip EHCI controller.
287 It is needed for high-speed (480Mbit/sec) USB 2.0 device
288 support.
289
290config USB_EHCI_ATH79
291 bool "EHCI support for AR7XXX/AR9XXX SoCs (DEPRECATED)"
292 depends on (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X)
293 select USB_EHCI_ROOT_HUB_TT
294 select USB_EHCI_HCD_PLATFORM
295 default y
296 ---help---
297 This option is deprecated now and the driver was removed, use
298 USB_EHCI_HCD_PLATFORM instead.
299
300 Enables support for the built-in EHCI controller present
301 on the Atheros AR7XXX/AR9XXX SoCs.
302
303config USB_EHCI_HCD_PLATFORM
304 tristate "Generic EHCI driver for a platform device"
305 default n
306 ---help---
307 Adds an EHCI host driver for a generic platform device, which
308 provides a memory space and an irq.
309
310 If unsure, say N.
311
312config USB_OCTEON_EHCI
313 bool "Octeon on-chip EHCI support (DEPRECATED)"
314 depends on CAVIUM_OCTEON_SOC
315 default n
316 select USB_EHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
317 select USB_EHCI_HCD_PLATFORM
318 help
319 This option is deprecated now and the driver was removed, use
320 USB_EHCI_HCD_PLATFORM instead.
321
322 Enable support for the Octeon II SOC's on-chip EHCI
323 controller. It is needed for high-speed (480Mbit/sec)
324 USB 2.0 device support. All CN6XXX based chips with USB are
325 supported.
326
327endif # USB_EHCI_HCD
328
329config USB_OXU210HP_HCD
330 tristate "OXU210HP HCD support"
331 depends on HAS_IOMEM
332 ---help---
333 The OXU210HP is an USB host/OTG/device controller. Enable this
334 option if your board has this chip. If unsure, say N.
335
336 This driver does not support isochronous transfers and doesn't
337 implement OTG nor USB device controllers.
338
339 To compile this driver as a module, choose M here: the
340 module will be called oxu210hp-hcd.
341
342config USB_ISP116X_HCD
343 tristate "ISP116X HCD support"
344 depends on HAS_IOMEM
345 ---help---
346 The ISP1160 and ISP1161 chips are USB host controllers. Enable this
347 option if your board has this chip. If unsure, say N.
348
349 This driver does not support isochronous transfers.
350
351 To compile this driver as a module, choose M here: the
352 module will be called isp116x-hcd.
353
354config USB_ISP1362_HCD
355 tristate "ISP1362 HCD support"
356 depends on HAS_IOMEM
357 ---help---
358 Supports the Philips ISP1362 chip as a host controller
359
360 This driver does not support isochronous transfers.
361
362 To compile this driver as a module, choose M here: the
363 module will be called isp1362-hcd.
364
365config USB_FOTG210_HCD
366 tristate "FOTG210 HCD support"
367 depends on USB && HAS_DMA && HAS_IOMEM
368 ---help---
369 Faraday FOTG210 is an OTG controller which can be configured as
370 an USB2.0 host. It is designed to meet USB2.0 EHCI specification
371 with minor modification.
372
373 To compile this driver as a module, choose M here: the
374 module will be called fotg210-hcd.
375
376config USB_MAX3421_HCD
377 tristate "MAX3421 HCD (USB-over-SPI) support"
378 depends on USB && SPI
379 ---help---
380 The Maxim MAX3421E chip supports standard USB 2.0-compliant
381 full-speed devices either in host or peripheral mode. This
382 driver supports the host-mode of the MAX3421E only.
383
384 To compile this driver as a module, choose M here: the module will
385 be called max3421-hcd.
386
387config USB_OHCI_HCD
388 tristate "OHCI HCD (USB 1.1) support"
389 depends on HAS_DMA && HAS_IOMEM
390 ---help---
391 The Open Host Controller Interface (OHCI) is a standard for accessing
392 USB 1.1 host controller hardware. It does more in hardware than Intel's
393 UHCI specification. If your USB host controller follows the OHCI spec,
394 say Y. On most non-x86 systems, and on x86 hardware that's not using a
395 USB controller from Intel or VIA, this is appropriate. If your host
396 controller doesn't use PCI, this is probably appropriate. For a PCI
397 based system where you're not sure, the "lspci -v" entry will list the
398 right "prog-if" for your USB controller(s): EHCI, OHCI, or UHCI.
399
400 To compile this driver as a module, choose M here: the
401 module will be called ohci-hcd.
402
403if USB_OHCI_HCD
404
405config USB_OHCI_HCD_OMAP1
406 tristate "OHCI support for OMAP1/2 chips"
407 depends on ARCH_OMAP1
408 depends on ISP1301_OMAP || !(MACH_OMAP_H2 || MACH_OMAP_H3)
409 default y
410 ---help---
411 Enables support for the OHCI controller on OMAP1/2 chips.
412
413config USB_OHCI_HCD_SPEAR
414 tristate "Support for ST SPEAr on-chip OHCI USB controller"
415 depends on USB_OHCI_HCD && PLAT_SPEAR
416 default y
417 ---help---
418 Enables support for the on-chip OHCI controller on
419 ST SPEAr chips.
420
421config USB_OHCI_HCD_STI
422 tristate "Support for ST STiHxxx on-chip OHCI USB controller"
423 depends on ARCH_STI && OF
424 select GENERIC_PHY
425 select USB_OHCI_HCD_PLATFORM
426 help
427 Enable support for the on-chip OHCI controller found on
428 STMicroelectronics consumer electronics SoC's.
429
430config USB_OHCI_HCD_S3C2410
431 tristate "OHCI support for Samsung S3C24xx/S3C64xx SoC series"
432 depends on USB_OHCI_HCD && (ARCH_S3C24XX || ARCH_S3C64XX)
433 default y
434 ---help---
435 Enables support for the on-chip OHCI controller on
436 S3C24xx/S3C64xx chips.
437
438config USB_OHCI_HCD_LPC32XX
439 tristate "Support for LPC on-chip OHCI USB controller"
440 depends on USB_OHCI_HCD && ARCH_LPC32XX
441 depends on USB_ISP1301
442 default y
443 ---help---
444 Enables support for the on-chip OHCI controller on
445 NXP chips.
446
447config USB_OHCI_HCD_PXA27X
448 tristate "Support for PXA27X/PXA3XX on-chip OHCI USB controller"
449 depends on USB_OHCI_HCD && (PXA27x || PXA3xx)
450 default y
451 ---help---
452 Enables support for the on-chip OHCI controller on
453 PXA27x/PXA3xx chips.
454
455config USB_OHCI_HCD_AT91
456 tristate "Support for Atmel on-chip OHCI USB controller"
457 depends on USB_OHCI_HCD && ARCH_AT91 && OF
458 default y
459 ---help---
460 Enables support for the on-chip OHCI controller on
461 Atmel chips.
462
463config USB_OHCI_HCD_OMAP3
464 tristate "OHCI support for OMAP3 and later chips"
465 depends on (ARCH_OMAP3 || ARCH_OMAP4)
466 default y
467 ---help---
468 Enables support for the on-chip OHCI controller on
469 OMAP3 and later chips.
470
471config USB_OHCI_HCD_DAVINCI
472 bool "OHCI support for TI DaVinci DA8xx"
473 depends on ARCH_DAVINCI_DA8XX
474 depends on USB_OHCI_HCD=y
475 default y
476 help
477 Enables support for the DaVinci DA8xx integrated OHCI
478 controller. This driver cannot currently be a loadable
479 module because it lacks a proper PHY abstraction.
480
481config USB_OHCI_ATH79
482 bool "USB OHCI support for the Atheros AR71XX/AR7240 SoCs (DEPRECATED)"
483 depends on (SOC_AR71XX || SOC_AR724X)
484 select USB_OHCI_HCD_PLATFORM
485 default y
486 help
487 This option is deprecated now and the driver was removed, use
488 USB_OHCI_HCD_PLATFORM instead.
489
490 Enables support for the built-in OHCI controller present on the
491 Atheros AR71XX/AR7240 SoCs.
492
493config USB_OHCI_HCD_PPC_OF_BE
494 bool "OHCI support for OF platform bus (big endian)"
495 depends on PPC
496 select USB_OHCI_BIG_ENDIAN_DESC
497 select USB_OHCI_BIG_ENDIAN_MMIO
498 ---help---
499 Enables support for big-endian USB controllers present on the
500 OpenFirmware platform bus.
501
502config USB_OHCI_HCD_PPC_OF_LE
503 bool "OHCI support for OF platform bus (little endian)"
504 depends on PPC
505 select USB_OHCI_LITTLE_ENDIAN
506 ---help---
507 Enables support for little-endian USB controllers present on the
508 OpenFirmware platform bus.
509
510config USB_OHCI_HCD_PPC_OF
511 bool
512 depends on PPC
513 default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE
514
515config USB_OHCI_HCD_PCI
516 tristate "OHCI support for PCI-bus USB controllers"
517 depends on PCI
518 default y
519 select USB_OHCI_LITTLE_ENDIAN
520 ---help---
521 Enables support for PCI-bus plug-in USB controller cards.
522 If unsure, say Y.
523
524config USB_OHCI_HCD_SSB
525 bool "OHCI support for Broadcom SSB OHCI core (DEPRECATED)"
526 depends on (SSB = y || SSB = USB_OHCI_HCD)
527 select USB_HCD_SSB
528 select USB_OHCI_HCD_PLATFORM
529 default n
530 ---help---
531 This option is deprecated now and the driver was removed, use
532 USB_HCD_SSB and USB_OHCI_HCD_PLATFORM instead.
533
534 Support for the Sonics Silicon Backplane (SSB) attached
535 Broadcom USB OHCI core.
536
537 This device is present in some embedded devices with
538 Broadcom based SSB bus.
539
540 If unsure, say N.
541
542config USB_OHCI_SH
543 bool "OHCI support for SuperH USB controller (DEPRECATED)"
544 depends on SUPERH
545 select USB_OHCI_HCD_PLATFORM
546 ---help---
547 This option is deprecated now and the driver was removed, use
548 USB_OHCI_HCD_PLATFORM instead.
549
550 Enables support for the on-chip OHCI controller on the SuperH.
551 If you use the PCI OHCI controller, this option is not necessary.
552
553config USB_OHCI_EXYNOS
554 tristate "OHCI support for Samsung S5P/EXYNOS SoC Series"
555 depends on ARCH_S5PV210 || ARCH_EXYNOS
556 help
557 Enable support for the Samsung Exynos SOC's on-chip OHCI controller.
558
559config USB_CNS3XXX_OHCI
560 bool "Cavium CNS3XXX OHCI Module (DEPRECATED)"
561 depends on ARCH_CNS3XXX
562 select USB_OHCI_HCD_PLATFORM
563 ---help---
564 This option is deprecated now and the driver was removed, use
565 USB_OHCI_HCD_PLATFORM instead.
566
567 Enable support for the CNS3XXX SOC's on-chip OHCI controller.
568 It is needed for low-speed USB 1.0 device support.
569
570config USB_OHCI_HCD_PLATFORM
571 tristate "Generic OHCI driver for a platform device"
572 default n
573 ---help---
574 Adds an OHCI host driver for a generic platform device, which
575 provides a memory space and an irq.
576
577 If unsure, say N.
578
579config USB_OCTEON_OHCI
580 bool "Octeon on-chip OHCI support (DEPRECATED)"
581 depends on CAVIUM_OCTEON_SOC
582 default USB_OCTEON_EHCI
583 select USB_OHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
584 select USB_OHCI_LITTLE_ENDIAN
585 select USB_OHCI_HCD_PLATFORM
586 help
587 This option is deprecated now and the driver was removed, use
588 USB_OHCI_HCD_PLATFORM instead.
589
590 Enable support for the Octeon II SOC's on-chip OHCI
591 controller. It is needed for low-speed USB 1.0 device
592 support. All CN6XXX based chips with USB are supported.
593
594endif # USB_OHCI_HCD
595
596config USB_UHCI_HCD
597 tristate "UHCI HCD (most Intel and VIA) support"
598 depends on PCI || USB_UHCI_SUPPORT_NON_PCI_HC
599 ---help---
600 The Universal Host Controller Interface is a standard by Intel for
601 accessing the USB hardware in the PC (which is also called the USB
602 host controller). If your USB host controller conforms to this
603 standard, you may want to say Y, but see below. All recent boards
604 with Intel PCI chipsets (like intel 430TX, 440FX, 440LX, 440BX,
605 i810, i820) conform to this standard. Also all VIA PCI chipsets
606 (like VIA VP2, VP3, MVP3, Apollo Pro, Apollo Pro II or Apollo Pro
607 133) and LEON/GRLIB SoCs with the GRUSBHC controller.
608 If unsure, say Y.
609
610 To compile this driver as a module, choose M here: the
611 module will be called uhci-hcd.
612
613config USB_UHCI_SUPPORT_NON_PCI_HC
614 bool
615 default y if (SPARC_LEON || USB_UHCI_PLATFORM)
616
617config USB_UHCI_PLATFORM
618 bool
619 default y if ARCH_VT8500
620
621config USB_UHCI_BIG_ENDIAN_MMIO
622 bool
623 default y if SPARC_LEON
624
625config USB_UHCI_BIG_ENDIAN_DESC
626 bool
627 default y if SPARC_LEON
628
629config USB_FHCI_HCD
630 tristate "Freescale QE USB Host Controller support"
631 depends on OF_GPIO && QE_GPIO && QUICC_ENGINE
632 select FSL_GTM
633 select QE_USB
634 help
635 This driver enables support for Freescale QE USB Host Controller
636 (as found on MPC8360 and MPC8323 processors), the driver supports
637 Full and Low Speed USB.
638
639config FHCI_DEBUG
640 bool "Freescale QE USB Host Controller debug support"
641 depends on USB_FHCI_HCD && DEBUG_FS
642 help
643 Say "y" to see some FHCI debug information and statistics
644 through debugfs.
645
646config USB_U132_HCD
647 tristate "Elan U132 Adapter Host Controller"
648 depends on USB_FTDI_ELAN
649 help
650 The U132 adapter is a USB to CardBus adapter specifically designed
651 for PC cards that contain an OHCI host controller. Typical PC cards
652 are the Orange Mobile 3G Option GlobeTrotter Fusion card. The U132
653 adapter will *NOT* work with PC cards that do not contain an OHCI
654 controller.
655
656 For those PC cards that contain multiple OHCI controllers only the
657 first one is used.
658
659 The driver consists of two modules, the "ftdi-elan" module is a
660 USB client driver that interfaces to the FTDI chip within ELAN's
661 USB-to-PCMCIA adapter, and this "u132-hcd" module is a USB host
662 controller driver that talks to the OHCI controller within the
663 CardBus cards that are inserted in the U132 adapter.
664
665 This driver has been tested with a CardBus OHCI USB adapter, and
666 worked with a USB PEN Drive inserted into the first USB port of
667 the PCCARD. A rather pointless thing to do, but useful for testing.
668
669 It is safe to say M here.
670
671 See also <http://www.elandigitalsystems.com/support/ufaq/u132linux.php>
672
673config USB_SL811_HCD
674 tristate "SL811HS HCD support"
675 depends on HAS_IOMEM
676 help
677 The SL811HS is a single-port USB controller that supports either
678 host side or peripheral side roles. Enable this option if your
679 board has this chip, and you want to use it as a host controller.
680 If unsure, say N.
681
682 To compile this driver as a module, choose M here: the
683 module will be called sl811-hcd.
684
685config USB_SL811_HCD_ISO
686 bool "partial ISO support"
687 depends on USB_SL811_HCD
688 help
689 The driver doesn't support iso_frame_desc (yet), but for some simple
690 devices that just queue one ISO frame per URB, then ISO transfers
691 "should" work using the normal urb status fields.
692
693 If unsure, say N.
694
695config USB_SL811_CS
696 tristate "CF/PCMCIA support for SL811HS HCD"
697 depends on USB_SL811_HCD && PCMCIA
698 help
699 Wraps a PCMCIA driver around the SL811HS HCD, supporting the RATOC
700 REX-CFU1U CF card (often used with PDAs). If unsure, say N.
701
702 To compile this driver as a module, choose M here: the
703 module will be called "sl811_cs".
704
705config USB_R8A66597_HCD
706 tristate "R8A66597 HCD support"
707 depends on HAS_IOMEM
708 help
709 The R8A66597 is a USB 2.0 host and peripheral controller.
710
711 Enable this option if your board has this chip, and you want
712 to use it as a host controller. If unsure, say N.
713
714 To compile this driver as a module, choose M here: the
715 module will be called r8a66597-hcd.
716
717config USB_RENESAS_USBHS_HCD
718 tristate "Renesas USBHS HCD support"
719 depends on USB_RENESAS_USBHS
720 help
721 The Renesas USBHS is a USB 2.0 host and peripheral controller.
722
723 Enable this option if your board has this chip, and you want
724 to use it as a host controller. If unsure, say N.
725
726 To compile this driver as a module, choose M here: the
727 module will be called renesas-usbhs.
728
729config USB_WHCI_HCD
730 tristate "Wireless USB Host Controller Interface (WHCI) driver"
731 depends on PCI && USB && UWB
732 select USB_WUSB
733 select UWB_WHCI
734 help
735 A driver for PCI-based Wireless USB Host Controllers that are
736 compliant with the WHCI specification.
737
738 To compile this driver a module, choose M here: the module
739 will be called "whci-hcd".
740
741config USB_HWA_HCD
742 tristate "Host Wire Adapter (HWA) driver"
743 depends on USB && UWB
744 select USB_WUSB
745 select UWB_HWA
746 help
747 This driver enables you to connect Wireless USB devices to
748 your system using a Host Wire Adaptor USB dongle. This is an
749 UWB Radio Controller and WUSB Host Controller connected to
750 your machine via USB (specified in WUSB1.0).
751
752 To compile this driver a module, choose M here: the module
753 will be called "hwa-hc".
754
755config USB_IMX21_HCD
756 tristate "i.MX21 HCD support"
757 depends on ARM && ARCH_MXC
758 help
759 This driver enables support for the on-chip USB host in the
760 i.MX21 processor.
761
762 To compile this driver as a module, choose M here: the
763 module will be called "imx21-hcd".
764
765config USB_HCD_BCMA
766 tristate "BCMA usb host driver"
767 depends on BCMA
768 select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
769 select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
770 help
771 Enable support for the EHCI and OCHI host controller on an bcma bus.
772 It converts the bcma driver into two platform device drivers
773 for ehci and ohci.
774
775 If unsure, say N.
776
777config USB_HCD_SSB
778 tristate "SSB usb host driver"
779 depends on SSB
780 select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
781 select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
782 help
783 Enable support for the EHCI and OCHI host controller on an bcma bus.
784 It converts the bcma driver into two platform device drivers
785 for ehci and ohci.
786
787 If unsure, say N.
788
789config USB_HCD_TEST_MODE
790 bool "HCD test mode support"
791 ---help---
792 Say 'Y' to enable additional software test modes that may be
793 supported by the host controller drivers.
794
795 One such test mode is the Embedded High-speed Host Electrical Test
796 (EHSET) for EHCI host controller hardware, specifically the "Single
797 Step Set Feature" test. Typically this will be enabled for On-the-Go
798 or embedded hosts that need to undergo USB-IF compliance testing with
799 the aid of special testing hardware. In the future, this may expand
800 to include other tests that require support from a HCD driver.
801
802 This option is of interest only to developers who need to validate
803 their USB hardware designs. It is not needed for normal use. If
804 unsure, say N.
1# SPDX-License-Identifier: GPL-2.0
2#
3# USB Host Controller Drivers
4#
5comment "USB Host Controller Drivers"
6
7config USB_C67X00_HCD
8 tristate "Cypress C67x00 HCD support"
9 depends on HAS_IOMEM
10 help
11 The Cypress C67x00 (EZ-Host/EZ-OTG) chips are dual-role
12 host/peripheral/OTG USB controllers.
13
14 Enable this option to support this chip in host controller mode.
15 If unsure, say N.
16
17 To compile this driver as a module, choose M here: the
18 module will be called c67x00.
19
20config USB_XHCI_HCD
21 tristate "xHCI HCD (USB 3.0) support"
22 depends on HAS_DMA && HAS_IOMEM
23 help
24 The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
25 "SuperSpeed" host controller hardware.
26
27 To compile this driver as a module, choose M here: the
28 module will be called xhci-hcd.
29
30if USB_XHCI_HCD
31config USB_XHCI_DBGCAP
32 bool "xHCI support for debug capability"
33 depends on TTY
34 help
35 Say 'Y' to enable the support for the xHCI debug capability. Make
36 sure that your xHCI host supports the extended debug capability and
37 you want a TTY serial device based on the xHCI debug capability
38 before enabling this option. If unsure, say 'N'.
39
40config USB_XHCI_PCI
41 tristate
42 depends on USB_PCI
43 depends on USB_XHCI_PCI_RENESAS || !USB_XHCI_PCI_RENESAS
44 default y
45
46config USB_XHCI_PCI_RENESAS
47 tristate "Support for additional Renesas xHCI controller with firmware"
48 help
49 Say 'Y' to enable the support for the Renesas xHCI controller with
50 firmware. Make sure you have the firmware for the device and
51 installed on your system for this device to work.
52 If unsure, say 'N'.
53
54config USB_XHCI_PLATFORM
55 tristate "Generic xHCI driver for a platform device"
56 select USB_XHCI_RCAR if ARCH_RENESAS
57 help
58 Adds an xHCI host driver for a generic platform device, which
59 provides a memory space and an irq.
60 It is also a prerequisite for platform specific drivers that
61 implement some extra quirks.
62
63 If unsure, say N.
64
65config USB_XHCI_HISTB
66 tristate "xHCI support for HiSilicon STB SoCs"
67 depends on USB_XHCI_PLATFORM && (ARCH_HISI || COMPILE_TEST)
68 help
69 Say 'Y' to enable the support for the xHCI host controller
70 found in HiSilicon STB SoCs.
71
72config USB_XHCI_MTK
73 tristate "xHCI support for MediaTek SoCs"
74 select MFD_SYSCON
75 depends on (MIPS && SOC_MT7621) || ARCH_MEDIATEK || COMPILE_TEST
76 help
77 Say 'Y' to enable the support for the xHCI host controller
78 found in MediaTek SoCs.
79 If unsure, say N.
80
81config USB_XHCI_MVEBU
82 tristate "xHCI support for Marvell Armada 375/38x/37xx"
83 select USB_XHCI_PLATFORM
84 depends on HAS_IOMEM
85 depends on ARCH_MVEBU || COMPILE_TEST
86 help
87 Say 'Y' to enable the support for the xHCI host controller
88 found in Marvell Armada 375/38x/37xx ARM SOCs.
89
90config USB_XHCI_RCAR
91 tristate "xHCI support for Renesas R-Car SoCs"
92 depends on USB_XHCI_PLATFORM
93 depends on ARCH_RENESAS || COMPILE_TEST
94 help
95 Say 'Y' to enable the support for the xHCI host controller
96 found in Renesas R-Car ARM SoCs.
97
98config USB_XHCI_TEGRA
99 tristate "xHCI support for NVIDIA Tegra SoCs"
100 depends on PHY_TEGRA_XUSB
101 depends on RESET_CONTROLLER
102 select FW_LOADER
103 help
104 Say 'Y' to enable the support for the xHCI host controller
105 found in NVIDIA Tegra124 and later SoCs.
106
107endif # USB_XHCI_HCD
108
109config USB_EHCI_BRCMSTB
110 tristate
111
112config USB_BRCMSTB
113 tristate "Broadcom STB USB support"
114 depends on (ARCH_BRCMSTB && PHY_BRCM_USB) || COMPILE_TEST
115 select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
116 select USB_EHCI_BRCMSTB if USB_EHCI_HCD
117 select USB_XHCI_PLATFORM if USB_XHCI_HCD
118 help
119 Enables support for XHCI, EHCI and OHCI host controllers
120 found in Broadcom STB SoC's.
121
122 To compile these drivers as modules, choose M here: the
123 modules will be called ohci-platform.ko, ehci-brcm.ko and
124 xhci-plat-hcd.ko
125
126 Disabling this will keep the controllers and corresponding
127 PHYs powered down.
128
129config USB_EHCI_HCD
130 tristate "EHCI HCD (USB 2.0) support"
131 depends on HAS_DMA && HAS_IOMEM
132 help
133 The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
134 "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
135 If your USB host controller supports USB 2.0, you will likely want to
136 configure this Host Controller Driver.
137
138 EHCI controllers are packaged with "companion" host controllers (OHCI
139 or UHCI) to handle USB 1.1 devices connected to root hub ports. Ports
140 will connect to EHCI if the device is high speed, otherwise they
141 connect to a companion controller. If you configure EHCI, you should
142 probably configure the OHCI (for NEC and some other vendors) USB Host
143 Controller Driver or UHCI (for Via motherboards) Host Controller
144 Driver too.
145
146 You may want to read <file:Documentation/usb/ehci.rst>.
147
148 To compile this driver as a module, choose M here: the
149 module will be called ehci-hcd.
150
151config USB_EHCI_ROOT_HUB_TT
152 bool "Root Hub Transaction Translators"
153 depends on USB_EHCI_HCD
154 help
155 Some EHCI chips have vendor-specific extensions to integrate
156 transaction translators, so that no OHCI or UHCI companion
157 controller is needed. It's safe to say "y" even if your
158 controller doesn't support this feature.
159
160 This supports the EHCI implementation that's originally
161 from ARC, and has since changed hands a few times.
162
163config USB_EHCI_TT_NEWSCHED
164 bool "Improved Transaction Translator scheduling"
165 depends on USB_EHCI_HCD
166 default y
167 help
168 This changes the periodic scheduling code to fill more of the low
169 and full speed bandwidth available from the Transaction Translator
170 (TT) in USB 2.0 hubs. Without this, only one transfer will be
171 issued in each microframe, significantly reducing the number of
172 periodic low/fullspeed transfers possible.
173
174 If you have multiple periodic low/fullspeed devices connected to a
175 highspeed USB hub which is connected to a highspeed USB Host
176 Controller, and some of those devices will not work correctly
177 (possibly due to "ENOSPC" or "-28" errors), say Y. Conversely, if
178 you have only one such device and it doesn't work, you could try
179 saying N.
180
181 If unsure, say Y.
182
183if USB_EHCI_HCD
184
185config USB_EHCI_PCI
186 tristate
187 depends on USB_PCI
188 default y
189
190config XPS_USB_HCD_XILINX
191 bool "Use Xilinx usb host EHCI controller core"
192 depends on (PPC32 || MICROBLAZE)
193 select USB_EHCI_BIG_ENDIAN_DESC
194 select USB_EHCI_BIG_ENDIAN_MMIO
195 help
196 Xilinx xps USB host controller core is EHCI compliant and has
197 transaction translator built-in. It can be configured to either
198 support both high speed and full speed devices, or high speed
199 devices only.
200
201config USB_EHCI_FSL
202 tristate "Support for Freescale on-chip EHCI USB controller"
203 select USB_EHCI_ROOT_HUB_TT
204 help
205 Variation of ARC USB block used in some Freescale chips.
206
207config USB_EHCI_HCD_NPCM7XX
208 tristate "Support for Nuvoton NPCM on-chip EHCI USB controller"
209 depends on (USB_EHCI_HCD && ARCH_NPCM) || COMPILE_TEST
210 default y if (USB_EHCI_HCD && ARCH_NPCM)
211 help
212 Enables support for the on-chip EHCI controller on
213 Nuvoton NPCM chips.
214
215config USB_EHCI_HCD_OMAP
216 tristate "EHCI support for OMAP3 and later chips"
217 depends on ARCH_OMAP || COMPILE_TEST
218 depends on NOP_USB_XCEIV
219 default y
220 help
221 Enables support for the on-chip EHCI controller on
222 OMAP3 and later chips.
223
224config USB_EHCI_HCD_ORION
225 tristate "Support for Marvell EBU on-chip EHCI USB controller"
226 depends on USB_EHCI_HCD && (PLAT_ORION || ARCH_MVEBU || COMPILE_TEST)
227 default y if (PLAT_ORION || ARCH_MVEBU)
228 help
229 Enables support for the on-chip EHCI controller on Marvell's
230 embedded ARM SoCs, including Orion, Kirkwood, Dove, Armada XP,
231 Armada 370. This is different from the EHCI implementation
232 on Marvell's mobile PXA and MMP SoC, see "EHCI support for
233 Marvell PXA/MMP USB controller" for those.
234
235config USB_EHCI_HCD_SPEAR
236 tristate "Support for ST SPEAr on-chip EHCI USB controller"
237 depends on USB_EHCI_HCD && (PLAT_SPEAR || COMPILE_TEST)
238 default y if PLAT_SPEAR
239 help
240 Enables support for the on-chip EHCI controller on
241 ST SPEAr chips.
242
243config USB_EHCI_HCD_STI
244 tristate "Support for ST STiHxxx on-chip EHCI USB controller"
245 depends on (ARCH_STI || COMPILE_TEST) && OF
246 select GENERIC_PHY
247 select USB_EHCI_HCD_PLATFORM
248 help
249 Enable support for the on-chip EHCI controller found on
250 STMicroelectronics consumer electronics SoC's.
251
252config USB_EHCI_HCD_AT91
253 tristate "Support for Atmel on-chip EHCI USB controller"
254 depends on USB_EHCI_HCD && (ARCH_AT91 || COMPILE_TEST)
255 default y if ARCH_AT91
256 help
257 Enables support for the on-chip EHCI controller on
258 Atmel chips.
259
260config USB_EHCI_TEGRA
261 tristate "NVIDIA Tegra HCD support"
262 depends on ARCH_TEGRA
263 select USB_CHIPIDEA
264 select USB_CHIPIDEA_HOST
265 select USB_CHIPIDEA_TEGRA
266 select USB_GADGET
267 help
268 This option is deprecated now and the driver was removed, use
269 USB_CHIPIDEA_TEGRA instead.
270
271 Enable support for the internal USB Host Controllers
272 found in NVIDIA Tegra SoCs. The controllers are EHCI compliant.
273
274config USB_EHCI_HCD_PPC_OF
275 bool "EHCI support for PPC USB controller on OF platform bus"
276 depends on PPC
277 default y
278 help
279 Enables support for the USB controller present on the PowerPC
280 OpenFirmware platform bus.
281
282config USB_EHCI_SH
283 bool "EHCI support for SuperH USB controller"
284 depends on SUPERH || COMPILE_TEST
285 help
286 Enables support for the on-chip EHCI controller on the SuperH.
287 If you use the PCI EHCI controller, this option is not necessary.
288
289config USB_EHCI_EXYNOS
290 tristate "EHCI support for Samsung S5P/Exynos SoC Series"
291 depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
292 help
293 Enable support for the Samsung S5Pv210 and Exynos SOC's on-chip EHCI
294 controller.
295
296config USB_EHCI_MV
297 tristate "EHCI support for Marvell PXA/MMP USB controller"
298 depends on ARCH_PXA || ARCH_MMP || COMPILE_TEST
299 select USB_EHCI_ROOT_HUB_TT
300 help
301 Enables support for Marvell (including PXA and MMP series) on-chip
302 USB SPH and OTG controller. SPH is a single port host, and it can
303 only be EHCI host. OTG is controller that can switch to host mode.
304 Note that this driver will not work on Marvell's other EHCI
305 controller used by the EBU-type SoCs including Orion, Kirkwood,
306 Dova, Armada 370 and Armada XP. See "Support for Marvell EBU
307 on-chip EHCI USB controller" for those.
308
309config USB_OCTEON_HCD
310 tristate "Cavium Networks Octeon USB support"
311 depends on CAVIUM_OCTEON_SOC && USB
312 help
313 This driver supports USB host controller on some Cavium
314 Networks' products in the Octeon family.
315
316 To compile this driver as a module, choose M here. The module
317 will be called octeon-hcd.
318
319config USB_CNS3XXX_EHCI
320 bool "Cavium CNS3XXX EHCI Module (DEPRECATED)"
321 depends on ARCH_CNS3XXX || COMPILE_TEST
322 select USB_EHCI_HCD_PLATFORM
323 help
324 This option is deprecated now and the driver was removed, use
325 USB_EHCI_HCD_PLATFORM instead.
326
327 Enable support for the CNS3XXX SOC's on-chip EHCI controller.
328 It is needed for high-speed (480Mbit/sec) USB 2.0 device
329 support.
330
331config USB_EHCI_HCD_PLATFORM
332 tristate "Generic EHCI driver for a platform device"
333 help
334 Adds an EHCI host driver for a generic platform device, which
335 provides a memory space and an irq.
336
337 If unsure, say N.
338
339config USB_OCTEON_EHCI
340 bool "Octeon on-chip EHCI support (DEPRECATED)"
341 depends on CAVIUM_OCTEON_SOC
342 select USB_EHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
343 select USB_EHCI_HCD_PLATFORM
344 help
345 This option is deprecated now and the driver was removed, use
346 USB_EHCI_HCD_PLATFORM instead.
347
348 Enable support for the Octeon II SOC's on-chip EHCI
349 controller. It is needed for high-speed (480Mbit/sec)
350 USB 2.0 device support. All CN6XXX based chips with USB are
351 supported.
352
353endif # USB_EHCI_HCD
354
355config USB_OXU210HP_HCD
356 tristate "OXU210HP HCD support"
357 depends on HAS_IOMEM
358 help
359 The OXU210HP is an USB host/OTG/device controller. Enable this
360 option if your board has this chip. If unsure, say N.
361
362 This driver does not support isochronous transfers and doesn't
363 implement OTG nor USB device controllers.
364
365 To compile this driver as a module, choose M here: the
366 module will be called oxu210hp-hcd.
367
368config USB_ISP116X_HCD
369 tristate "ISP116X HCD support"
370 depends on HAS_IOMEM
371 help
372 The ISP1160 and ISP1161 chips are USB host controllers. Enable this
373 option if your board has this chip. If unsure, say N.
374
375 This driver does not support isochronous transfers.
376
377 To compile this driver as a module, choose M here: the
378 module will be called isp116x-hcd.
379
380config USB_ISP1362_HCD
381 tristate "ISP1362 HCD support"
382 depends on HAS_IOMEM
383 depends on COMPILE_TEST # nothing uses this
384 help
385 Supports the Philips ISP1362 chip as a host controller
386
387 This driver does not support isochronous transfers.
388
389 To compile this driver as a module, choose M here: the
390 module will be called isp1362-hcd.
391
392config USB_MAX3421_HCD
393 tristate "MAX3421 HCD (USB-over-SPI) support"
394 depends on USB && SPI
395 help
396 The Maxim MAX3421E chip supports standard USB 2.0-compliant
397 full-speed devices either in host or peripheral mode. This
398 driver supports the host-mode of the MAX3421E only.
399
400 To compile this driver as a module, choose M here: the module will
401 be called max3421-hcd.
402
403config USB_OHCI_HCD
404 tristate "OHCI HCD (USB 1.1) support"
405 depends on HAS_DMA && HAS_IOMEM
406 help
407 The Open Host Controller Interface (OHCI) is a standard for accessing
408 USB 1.1 host controller hardware. It does more in hardware than Intel's
409 UHCI specification. If your USB host controller follows the OHCI spec,
410 say Y. On most non-x86 systems, and on x86 hardware that's not using a
411 USB controller from Intel or VIA, this is appropriate. If your host
412 controller doesn't use PCI, this is probably appropriate. For a PCI
413 based system where you're not sure, the "lspci -v" entry will list the
414 right "prog-if" for your USB controller(s): EHCI, OHCI, or UHCI.
415
416 To compile this driver as a module, choose M here: the
417 module will be called ohci-hcd.
418
419if USB_OHCI_HCD
420
421config USB_OHCI_HCD_OMAP1
422 tristate "OHCI support for OMAP1/2 chips"
423 depends on ARCH_OMAP1
424 depends on ISP1301_OMAP || !(MACH_OMAP_H2 || MACH_OMAP_H3)
425 default y
426 help
427 Enables support for the OHCI controller on OMAP1/2 chips.
428
429config USB_OHCI_HCD_SPEAR
430 tristate "Support for ST SPEAr on-chip OHCI USB controller"
431 depends on USB_OHCI_HCD && (PLAT_SPEAR || COMPILE_TEST)
432 default y if PLAT_SPEAR
433 help
434 Enables support for the on-chip OHCI controller on
435 ST SPEAr chips.
436
437config USB_OHCI_HCD_STI
438 tristate "Support for ST STiHxxx on-chip OHCI USB controller"
439 depends on (ARCH_STI || COMPILE_TEST) && OF
440 select GENERIC_PHY
441 select USB_OHCI_HCD_PLATFORM
442 help
443 Enable support for the on-chip OHCI controller found on
444 STMicroelectronics consumer electronics SoC's.
445
446config USB_OHCI_HCD_S3C2410
447 tristate "OHCI support for Samsung S3C24xx/S3C64xx SoC series"
448 depends on USB_OHCI_HCD && (ARCH_S3C24XX || ARCH_S3C64XX || COMPILE_TEST)
449 default y if (ARCH_S3C24XX || ARCH_S3C64XX)
450 help
451 Enables support for the on-chip OHCI controller on
452 S3C24xx/S3C64xx chips.
453
454config USB_OHCI_HCD_LPC32XX
455 tristate "Support for LPC on-chip OHCI USB controller"
456 depends on USB_OHCI_HCD
457 depends on ARCH_LPC32XX || COMPILE_TEST
458 depends on USB_ISP1301
459 default y
460 help
461 Enables support for the on-chip OHCI controller on
462 NXP chips.
463
464config USB_OHCI_HCD_PXA27X
465 tristate "Support for PXA27X/PXA3XX on-chip OHCI USB controller"
466 depends on USB_OHCI_HCD && (PXA27x || PXA3xx)
467 default y
468 help
469 Enables support for the on-chip OHCI controller on
470 PXA27x/PXA3xx chips.
471
472config USB_OHCI_HCD_AT91
473 tristate "Support for Atmel on-chip OHCI USB controller"
474 depends on USB_OHCI_HCD && (ARCH_AT91 || COMPILE_TEST) && OF
475 default y if ARCH_AT91
476 help
477 Enables support for the on-chip OHCI controller on
478 Atmel chips.
479
480config USB_OHCI_HCD_OMAP3
481 tristate "OHCI support for OMAP3 and later chips"
482 depends on ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5 || COMPILE_TEST
483 select USB_OHCI_HCD_PLATFORM
484 default y if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
485 help
486 This option is deprecated now and the driver was removed, use
487 USB_OHCI_HCD_PLATFORM instead.
488
489 Enables support for the on-chip OHCI controller on
490 OMAP3 and later chips.
491
492config USB_OHCI_HCD_DAVINCI
493 tristate "OHCI support for TI DaVinci DA8xx"
494 depends on ARCH_DAVINCI_DA8XX || COMPILE_TEST
495 depends on USB_OHCI_HCD
496 select PHY_DA8XX_USB
497 default y if ARCH_DAVINCI_DA8XX
498 help
499 Enables support for the DaVinci DA8xx integrated OHCI
500 controller. This driver cannot currently be a loadable
501 module because it lacks a proper PHY abstraction.
502
503config USB_OHCI_HCD_PPC_OF_BE
504 bool "OHCI support for OF platform bus (big endian)"
505 depends on PPC
506 select USB_OHCI_BIG_ENDIAN_DESC
507 select USB_OHCI_BIG_ENDIAN_MMIO
508 help
509 Enables support for big-endian USB controllers present on the
510 OpenFirmware platform bus.
511
512config USB_OHCI_HCD_PPC_OF_LE
513 bool "OHCI support for OF platform bus (little endian)"
514 depends on PPC
515 select USB_OHCI_LITTLE_ENDIAN
516 help
517 Enables support for little-endian USB controllers present on the
518 OpenFirmware platform bus.
519
520config USB_OHCI_HCD_PPC_OF
521 bool
522 depends on PPC
523 default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE
524
525config USB_OHCI_HCD_PCI
526 tristate "OHCI support for PCI-bus USB controllers"
527 depends on USB_PCI
528 default y
529 select USB_OHCI_LITTLE_ENDIAN
530 help
531 Enables support for PCI-bus plug-in USB controller cards.
532 If unsure, say Y.
533
534config USB_OHCI_HCD_SSB
535 bool "OHCI support for Broadcom SSB OHCI core (DEPRECATED)"
536 depends on (SSB = y || SSB = USB_OHCI_HCD)
537 select USB_HCD_SSB
538 select USB_OHCI_HCD_PLATFORM
539 help
540 This option is deprecated now and the driver was removed, use
541 USB_HCD_SSB and USB_OHCI_HCD_PLATFORM instead.
542
543 Support for the Sonics Silicon Backplane (SSB) attached
544 Broadcom USB OHCI core.
545
546 This device is present in some embedded devices with
547 Broadcom based SSB bus.
548
549 If unsure, say N.
550
551config USB_OHCI_SH
552 bool "OHCI support for SuperH USB controller (DEPRECATED)"
553 depends on SUPERH || COMPILE_TEST
554 select USB_OHCI_HCD_PLATFORM
555 help
556 This option is deprecated now and the driver was removed, use
557 USB_OHCI_HCD_PLATFORM instead.
558
559 Enables support for the on-chip OHCI controller on the SuperH.
560 If you use the PCI OHCI controller, this option is not necessary.
561
562config USB_OHCI_EXYNOS
563 tristate "OHCI support for Samsung S5P/Exynos SoC Series"
564 depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
565 help
566 Enable support for the Samsung S5Pv210 and Exynos SOC's on-chip OHCI
567 controller.
568
569config USB_CNS3XXX_OHCI
570 bool "Cavium CNS3XXX OHCI Module (DEPRECATED)"
571 depends on ARCH_CNS3XXX || COMPILE_TEST
572 select USB_OHCI_HCD_PLATFORM
573 help
574 This option is deprecated now and the driver was removed, use
575 USB_OHCI_HCD_PLATFORM instead.
576
577 Enable support for the CNS3XXX SOC's on-chip OHCI controller.
578 It is needed for low-speed USB 1.0 device support.
579
580config USB_OHCI_HCD_PLATFORM
581 tristate "Generic OHCI driver for a platform device"
582 help
583 Adds an OHCI host driver for a generic platform device, which
584 provides a memory space and an irq.
585
586 If unsure, say N.
587
588config USB_OCTEON_OHCI
589 bool "Octeon on-chip OHCI support (DEPRECATED)"
590 depends on CAVIUM_OCTEON_SOC
591 default USB_OCTEON_EHCI
592 select USB_OHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
593 select USB_OHCI_LITTLE_ENDIAN
594 select USB_OHCI_HCD_PLATFORM
595 help
596 This option is deprecated now and the driver was removed, use
597 USB_OHCI_HCD_PLATFORM instead.
598
599 Enable support for the Octeon II SOC's on-chip OHCI
600 controller. It is needed for low-speed USB 1.0 device
601 support. All CN6XXX based chips with USB are supported.
602
603endif # USB_OHCI_HCD
604
605config USB_UHCI_HCD
606 tristate "UHCI HCD (most Intel and VIA) support"
607 depends on USB_PCI || USB_UHCI_SUPPORT_NON_PCI_HC
608 help
609 The Universal Host Controller Interface is a standard by Intel for
610 accessing the USB hardware in the PC (which is also called the USB
611 host controller). If your USB host controller conforms to this
612 standard, you may want to say Y, but see below. All recent boards
613 with Intel PCI chipsets (like intel 430TX, 440FX, 440LX, 440BX,
614 i810, i820) conform to this standard. Also all VIA PCI chipsets
615 (like VIA VP2, VP3, MVP3, Apollo Pro, Apollo Pro II or Apollo Pro
616 133) and LEON/GRLIB SoCs with the GRUSBHC controller.
617 If unsure, say Y.
618
619 To compile this driver as a module, choose M here: the
620 module will be called uhci-hcd.
621
622config USB_UHCI_SUPPORT_NON_PCI_HC
623 bool
624 default y if (SPARC_LEON || USB_UHCI_PLATFORM)
625
626config USB_UHCI_PLATFORM
627 bool
628 default y if (ARCH_VT8500 || ARCH_ASPEED)
629
630config USB_UHCI_ASPEED
631 bool
632 default y if ARCH_ASPEED
633
634config USB_FHCI_HCD
635 tristate "Freescale QE USB Host Controller support"
636 depends on OF_GPIO && QE_GPIO && QUICC_ENGINE
637 select FSL_GTM
638 select QE_USB
639 help
640 This driver enables support for Freescale QE USB Host Controller
641 (as found on MPC8360 and MPC8323 processors), the driver supports
642 Full and Low Speed USB.
643
644config FHCI_DEBUG
645 bool "Freescale QE USB Host Controller debug support"
646 depends on USB_FHCI_HCD && DEBUG_FS
647 help
648 Say "y" to see some FHCI debug information and statistics
649 through debugfs.
650
651config USB_U132_HCD
652 tristate "Elan U132 Adapter Host Controller"
653 depends on USB_FTDI_ELAN
654 help
655 The U132 adapter is a USB to CardBus adapter specifically designed
656 for PC cards that contain an OHCI host controller. Typical PC cards
657 are the Orange Mobile 3G Option GlobeTrotter Fusion card. The U132
658 adapter will *NOT* work with PC cards that do not contain an OHCI
659 controller.
660
661 For those PC cards that contain multiple OHCI controllers only the
662 first one is used.
663
664 The driver consists of two modules, the "ftdi-elan" module is a
665 USB client driver that interfaces to the FTDI chip within ELAN's
666 USB-to-PCMCIA adapter, and this "u132-hcd" module is a USB host
667 controller driver that talks to the OHCI controller within the
668 CardBus cards that are inserted in the U132 adapter.
669
670 This driver has been tested with a CardBus OHCI USB adapter, and
671 worked with a USB PEN Drive inserted into the first USB port of
672 the PCCARD. A rather pointless thing to do, but useful for testing.
673
674 It is safe to say M here.
675
676 See also <http://www.elandigitalsystems.com/support/ufaq/u132linux.php>
677
678config USB_SL811_HCD
679 tristate "SL811HS HCD support"
680 depends on HAS_IOMEM
681 help
682 The SL811HS is a single-port USB controller that supports either
683 host side or peripheral side roles. Enable this option if your
684 board has this chip, and you want to use it as a host controller.
685 If unsure, say N.
686
687 To compile this driver as a module, choose M here: the
688 module will be called sl811-hcd.
689
690config USB_SL811_HCD_ISO
691 bool "partial ISO support"
692 depends on USB_SL811_HCD
693 help
694 The driver doesn't support iso_frame_desc (yet), but for some simple
695 devices that just queue one ISO frame per URB, then ISO transfers
696 "should" work using the normal urb status fields.
697
698 If unsure, say N.
699
700config USB_SL811_CS
701 tristate "CF/PCMCIA support for SL811HS HCD"
702 depends on USB_SL811_HCD && PCMCIA
703 help
704 Wraps a PCMCIA driver around the SL811HS HCD, supporting the RATOC
705 REX-CFU1U CF card (often used with PDAs). If unsure, say N.
706
707 To compile this driver as a module, choose M here: the
708 module will be called "sl811_cs".
709
710config USB_R8A66597_HCD
711 tristate "R8A66597 HCD support"
712 depends on HAS_IOMEM
713 help
714 The R8A66597 is a USB 2.0 host and peripheral controller.
715
716 Enable this option if your board has this chip, and you want
717 to use it as a host controller. If unsure, say N.
718
719 To compile this driver as a module, choose M here: the
720 module will be called r8a66597-hcd.
721
722config USB_RENESAS_USBHS_HCD
723 tristate "Renesas USBHS HCD support"
724 depends on USB_RENESAS_USBHS
725 help
726 The Renesas USBHS is a USB 2.0 host and peripheral controller.
727
728 Enable this option if your board has this chip, and you want
729 to use it as a host controller. If unsure, say N.
730
731 To compile this driver as a module, choose M here: the
732 module will be called renesas-usbhs.
733
734config USB_HCD_BCMA
735 tristate "BCMA usb host driver"
736 depends on BCMA
737 select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
738 select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
739 help
740 Enable support for the EHCI and OCHI host controller on an bcma bus.
741 It converts the bcma driver into two platform device drivers
742 for ehci and ohci.
743
744 If unsure, say N.
745
746config USB_HCD_SSB
747 tristate "SSB usb host driver"
748 depends on SSB
749 select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
750 select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
751 help
752 Enable support for the EHCI and OCHI host controller on an bcma bus.
753 It converts the bcma driver into two platform device drivers
754 for ehci and ohci.
755
756 If unsure, say N.
757
758config USB_HCD_TEST_MODE
759 bool "HCD test mode support"
760 help
761 Say 'Y' to enable additional software test modes that may be
762 supported by the host controller drivers.
763
764 One such test mode is the Embedded High-speed Host Electrical Test
765 (EHSET) for EHCI host controller hardware, specifically the "Single
766 Step Set Feature" test. Typically this will be enabled for On-the-Go
767 or embedded hosts that need to undergo USB-IF compliance testing with
768 the aid of special testing hardware. In the future, this may expand
769 to include other tests that require support from a HCD driver.
770
771 This option is of interest only to developers who need to validate
772 their USB hardware designs. It is not needed for normal use. If
773 unsure, say N.
774
775config USB_XEN_HCD
776 tristate "Xen usb virtual host driver"
777 depends on XEN
778 select XEN_XENBUS_FRONTEND
779 help
780 The Xen usb virtual host driver serves as a frontend driver enabling
781 a Xen guest system to access USB Devices passed through to the guest
782 by the Xen host (usually Dom0).
783 Only needed if the kernel is running in a Xen guest and generic
784 access to a USB device is needed.