Loading...
1/*
2 * USB Cypress M8 driver
3 *
4 * Copyright (C) 2004
5 * Lonnie Mendez (dignome@gmail.com)
6 * Copyright (C) 2003,2004
7 * Neil Whelchel (koyama@firstlight.net)
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
13 *
14 * See Documentation/usb/usb-serial.txt for more information on using this
15 * driver
16 *
17 * See http://geocities.com/i0xox0i for information on this driver and the
18 * earthmate usb device.
19 */
20
21/* Thanks to Neil Whelchel for writing the first cypress m8 implementation
22 for linux. */
23/* Thanks to cypress for providing references for the hid reports. */
24/* Thanks to Jiang Zhang for providing links and for general help. */
25/* Code originates and was built up from ftdi_sio, belkin, pl2303 and others.*/
26
27
28#include <linux/kernel.h>
29#include <linux/errno.h>
30#include <linux/slab.h>
31#include <linux/tty.h>
32#include <linux/tty_driver.h>
33#include <linux/tty_flip.h>
34#include <linux/module.h>
35#include <linux/moduleparam.h>
36#include <linux/spinlock.h>
37#include <linux/usb.h>
38#include <linux/usb/serial.h>
39#include <linux/serial.h>
40#include <linux/kfifo.h>
41#include <linux/delay.h>
42#include <linux/uaccess.h>
43#include <asm/unaligned.h>
44
45#include "cypress_m8.h"
46
47
48static bool stats;
49static int interval;
50static bool unstable_bauds;
51
52#define DRIVER_AUTHOR "Lonnie Mendez <dignome@gmail.com>, Neil Whelchel <koyama@firstlight.net>"
53#define DRIVER_DESC "Cypress USB to Serial Driver"
54
55/* write buffer size defines */
56#define CYPRESS_BUF_SIZE 1024
57
58static const struct usb_device_id id_table_earthmate[] = {
59 { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
60 { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
61 { } /* Terminating entry */
62};
63
64static const struct usb_device_id id_table_cyphidcomrs232[] = {
65 { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
66 { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
67 { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) },
68 { } /* Terminating entry */
69};
70
71static const struct usb_device_id id_table_nokiaca42v2[] = {
72 { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
73 { } /* Terminating entry */
74};
75
76static const struct usb_device_id id_table_combined[] = {
77 { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
78 { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
79 { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
80 { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
81 { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) },
82 { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
83 { } /* Terminating entry */
84};
85
86MODULE_DEVICE_TABLE(usb, id_table_combined);
87
88enum packet_format {
89 packet_format_1, /* b0:status, b1:payload count */
90 packet_format_2 /* b0[7:3]:status, b0[2:0]:payload count */
91};
92
93struct cypress_private {
94 spinlock_t lock; /* private lock */
95 int chiptype; /* identifier of device, for quirks/etc */
96 int bytes_in; /* used for statistics */
97 int bytes_out; /* used for statistics */
98 int cmd_count; /* used for statistics */
99 int cmd_ctrl; /* always set this to 1 before issuing a command */
100 struct kfifo write_fifo; /* write fifo */
101 int write_urb_in_use; /* write urb in use indicator */
102 int write_urb_interval; /* interval to use for write urb */
103 int read_urb_interval; /* interval to use for read urb */
104 int comm_is_ok; /* true if communication is (still) ok */
105 int termios_initialized;
106 __u8 line_control; /* holds dtr / rts value */
107 __u8 current_status; /* received from last read - info on dsr,cts,cd,ri,etc */
108 __u8 current_config; /* stores the current configuration byte */
109 __u8 rx_flags; /* throttling - used from whiteheat/ftdi_sio */
110 enum packet_format pkt_fmt; /* format to use for packet send / receive */
111 int get_cfg_unsafe; /* If true, the CYPRESS_GET_CONFIG is unsafe */
112 int baud_rate; /* stores current baud rate in
113 integer form */
114 int isthrottled; /* if throttled, discard reads */
115 char prev_status; /* used for TIOCMIWAIT */
116 /* we pass a pointer to this as the argument sent to
117 cypress_set_termios old_termios */
118 struct ktermios tmp_termios; /* stores the old termios settings */
119};
120
121/* function prototypes for the Cypress USB to serial device */
122static int cypress_earthmate_port_probe(struct usb_serial_port *port);
123static int cypress_hidcom_port_probe(struct usb_serial_port *port);
124static int cypress_ca42v2_port_probe(struct usb_serial_port *port);
125static int cypress_port_remove(struct usb_serial_port *port);
126static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port);
127static void cypress_close(struct usb_serial_port *port);
128static void cypress_dtr_rts(struct usb_serial_port *port, int on);
129static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
130 const unsigned char *buf, int count);
131static void cypress_send(struct usb_serial_port *port);
132static int cypress_write_room(struct tty_struct *tty);
133static void cypress_set_termios(struct tty_struct *tty,
134 struct usb_serial_port *port, struct ktermios *old);
135static int cypress_tiocmget(struct tty_struct *tty);
136static int cypress_tiocmset(struct tty_struct *tty,
137 unsigned int set, unsigned int clear);
138static int cypress_chars_in_buffer(struct tty_struct *tty);
139static void cypress_throttle(struct tty_struct *tty);
140static void cypress_unthrottle(struct tty_struct *tty);
141static void cypress_set_dead(struct usb_serial_port *port);
142static void cypress_read_int_callback(struct urb *urb);
143static void cypress_write_int_callback(struct urb *urb);
144
145static struct usb_serial_driver cypress_earthmate_device = {
146 .driver = {
147 .owner = THIS_MODULE,
148 .name = "earthmate",
149 },
150 .description = "DeLorme Earthmate USB",
151 .id_table = id_table_earthmate,
152 .num_ports = 1,
153 .port_probe = cypress_earthmate_port_probe,
154 .port_remove = cypress_port_remove,
155 .open = cypress_open,
156 .close = cypress_close,
157 .dtr_rts = cypress_dtr_rts,
158 .write = cypress_write,
159 .write_room = cypress_write_room,
160 .set_termios = cypress_set_termios,
161 .tiocmget = cypress_tiocmget,
162 .tiocmset = cypress_tiocmset,
163 .tiocmiwait = usb_serial_generic_tiocmiwait,
164 .chars_in_buffer = cypress_chars_in_buffer,
165 .throttle = cypress_throttle,
166 .unthrottle = cypress_unthrottle,
167 .read_int_callback = cypress_read_int_callback,
168 .write_int_callback = cypress_write_int_callback,
169};
170
171static struct usb_serial_driver cypress_hidcom_device = {
172 .driver = {
173 .owner = THIS_MODULE,
174 .name = "cyphidcom",
175 },
176 .description = "HID->COM RS232 Adapter",
177 .id_table = id_table_cyphidcomrs232,
178 .num_ports = 1,
179 .port_probe = cypress_hidcom_port_probe,
180 .port_remove = cypress_port_remove,
181 .open = cypress_open,
182 .close = cypress_close,
183 .dtr_rts = cypress_dtr_rts,
184 .write = cypress_write,
185 .write_room = cypress_write_room,
186 .set_termios = cypress_set_termios,
187 .tiocmget = cypress_tiocmget,
188 .tiocmset = cypress_tiocmset,
189 .tiocmiwait = usb_serial_generic_tiocmiwait,
190 .chars_in_buffer = cypress_chars_in_buffer,
191 .throttle = cypress_throttle,
192 .unthrottle = cypress_unthrottle,
193 .read_int_callback = cypress_read_int_callback,
194 .write_int_callback = cypress_write_int_callback,
195};
196
197static struct usb_serial_driver cypress_ca42v2_device = {
198 .driver = {
199 .owner = THIS_MODULE,
200 .name = "nokiaca42v2",
201 },
202 .description = "Nokia CA-42 V2 Adapter",
203 .id_table = id_table_nokiaca42v2,
204 .num_ports = 1,
205 .port_probe = cypress_ca42v2_port_probe,
206 .port_remove = cypress_port_remove,
207 .open = cypress_open,
208 .close = cypress_close,
209 .dtr_rts = cypress_dtr_rts,
210 .write = cypress_write,
211 .write_room = cypress_write_room,
212 .set_termios = cypress_set_termios,
213 .tiocmget = cypress_tiocmget,
214 .tiocmset = cypress_tiocmset,
215 .tiocmiwait = usb_serial_generic_tiocmiwait,
216 .chars_in_buffer = cypress_chars_in_buffer,
217 .throttle = cypress_throttle,
218 .unthrottle = cypress_unthrottle,
219 .read_int_callback = cypress_read_int_callback,
220 .write_int_callback = cypress_write_int_callback,
221};
222
223static struct usb_serial_driver * const serial_drivers[] = {
224 &cypress_earthmate_device, &cypress_hidcom_device,
225 &cypress_ca42v2_device, NULL
226};
227
228/*****************************************************************************
229 * Cypress serial helper functions
230 *****************************************************************************/
231
232/* FRWD Dongle hidcom needs to skip reset and speed checks */
233static inline bool is_frwd(struct usb_device *dev)
234{
235 return ((le16_to_cpu(dev->descriptor.idVendor) == VENDOR_ID_FRWD) &&
236 (le16_to_cpu(dev->descriptor.idProduct) == PRODUCT_ID_CYPHIDCOM_FRWD));
237}
238
239static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
240{
241 struct cypress_private *priv;
242 priv = usb_get_serial_port_data(port);
243
244 if (unstable_bauds)
245 return new_rate;
246
247 /* FRWD Dongle uses 115200 bps */
248 if (is_frwd(port->serial->dev))
249 return new_rate;
250
251 /*
252 * The general purpose firmware for the Cypress M8 allows for
253 * a maximum speed of 57600bps (I have no idea whether DeLorme
254 * chose to use the general purpose firmware or not), if you
255 * need to modify this speed setting for your own project
256 * please add your own chiptype and modify the code likewise.
257 * The Cypress HID->COM device will work successfully up to
258 * 115200bps (but the actual throughput is around 3kBps).
259 */
260 if (port->serial->dev->speed == USB_SPEED_LOW) {
261 /*
262 * Mike Isely <isely@pobox.com> 2-Feb-2008: The
263 * Cypress app note that describes this mechanism
264 * states the the low-speed part can't handle more
265 * than 800 bytes/sec, in which case 4800 baud is the
266 * safest speed for a part like that.
267 */
268 if (new_rate > 4800) {
269 dev_dbg(&port->dev,
270 "%s - failed setting baud rate, device incapable speed %d\n",
271 __func__, new_rate);
272 return -1;
273 }
274 }
275 switch (priv->chiptype) {
276 case CT_EARTHMATE:
277 if (new_rate <= 600) {
278 /* 300 and 600 baud rates are supported under
279 * the generic firmware, but are not used with
280 * NMEA and SiRF protocols */
281 dev_dbg(&port->dev,
282 "%s - failed setting baud rate, unsupported speed of %d on Earthmate GPS\n",
283 __func__, new_rate);
284 return -1;
285 }
286 break;
287 default:
288 break;
289 }
290 return new_rate;
291}
292
293
294/* This function can either set or retrieve the current serial line settings */
295static int cypress_serial_control(struct tty_struct *tty,
296 struct usb_serial_port *port, speed_t baud_rate, int data_bits,
297 int stop_bits, int parity_enable, int parity_type, int reset,
298 int cypress_request_type)
299{
300 int new_baudrate = 0, retval = 0, tries = 0;
301 struct cypress_private *priv;
302 struct device *dev = &port->dev;
303 u8 *feature_buffer;
304 const unsigned int feature_len = 5;
305 unsigned long flags;
306
307 priv = usb_get_serial_port_data(port);
308
309 if (!priv->comm_is_ok)
310 return -ENODEV;
311
312 feature_buffer = kcalloc(feature_len, sizeof(u8), GFP_KERNEL);
313 if (!feature_buffer)
314 return -ENOMEM;
315
316 switch (cypress_request_type) {
317 case CYPRESS_SET_CONFIG:
318 /* 0 means 'Hang up' so doesn't change the true bit rate */
319 new_baudrate = priv->baud_rate;
320 if (baud_rate && baud_rate != priv->baud_rate) {
321 dev_dbg(dev, "%s - baud rate is changing\n", __func__);
322 retval = analyze_baud_rate(port, baud_rate);
323 if (retval >= 0) {
324 new_baudrate = retval;
325 dev_dbg(dev, "%s - New baud rate set to %d\n",
326 __func__, new_baudrate);
327 }
328 }
329 dev_dbg(dev, "%s - baud rate is being sent as %d\n", __func__,
330 new_baudrate);
331
332 /* fill the feature_buffer with new configuration */
333 put_unaligned_le32(new_baudrate, feature_buffer);
334 feature_buffer[4] |= data_bits; /* assign data bits in 2 bit space ( max 3 ) */
335 /* 1 bit gap */
336 feature_buffer[4] |= (stop_bits << 3); /* assign stop bits in 1 bit space */
337 feature_buffer[4] |= (parity_enable << 4); /* assign parity flag in 1 bit space */
338 feature_buffer[4] |= (parity_type << 5); /* assign parity type in 1 bit space */
339 /* 1 bit gap */
340 feature_buffer[4] |= (reset << 7); /* assign reset at end of byte, 1 bit space */
341
342 dev_dbg(dev, "%s - device is being sent this feature report:\n", __func__);
343 dev_dbg(dev, "%s - %02X - %02X - %02X - %02X - %02X\n", __func__,
344 feature_buffer[0], feature_buffer[1],
345 feature_buffer[2], feature_buffer[3],
346 feature_buffer[4]);
347
348 do {
349 retval = usb_control_msg(port->serial->dev,
350 usb_sndctrlpipe(port->serial->dev, 0),
351 HID_REQ_SET_REPORT,
352 USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
353 0x0300, 0, feature_buffer,
354 feature_len, 500);
355
356 if (tries++ >= 3)
357 break;
358
359 } while (retval != feature_len &&
360 retval != -ENODEV);
361
362 if (retval != feature_len) {
363 dev_err(dev, "%s - failed sending serial line settings - %d\n",
364 __func__, retval);
365 cypress_set_dead(port);
366 } else {
367 spin_lock_irqsave(&priv->lock, flags);
368 priv->baud_rate = new_baudrate;
369 priv->current_config = feature_buffer[4];
370 spin_unlock_irqrestore(&priv->lock, flags);
371 /* If we asked for a speed change encode it */
372 if (baud_rate)
373 tty_encode_baud_rate(tty,
374 new_baudrate, new_baudrate);
375 }
376 break;
377 case CYPRESS_GET_CONFIG:
378 if (priv->get_cfg_unsafe) {
379 /* Not implemented for this device,
380 and if we try to do it we're likely
381 to crash the hardware. */
382 retval = -ENOTTY;
383 goto out;
384 }
385 dev_dbg(dev, "%s - retreiving serial line settings\n", __func__);
386 do {
387 retval = usb_control_msg(port->serial->dev,
388 usb_rcvctrlpipe(port->serial->dev, 0),
389 HID_REQ_GET_REPORT,
390 USB_DIR_IN | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
391 0x0300, 0, feature_buffer,
392 feature_len, 500);
393
394 if (tries++ >= 3)
395 break;
396 } while (retval != feature_len
397 && retval != -ENODEV);
398
399 if (retval != feature_len) {
400 dev_err(dev, "%s - failed to retrieve serial line settings - %d\n",
401 __func__, retval);
402 cypress_set_dead(port);
403 goto out;
404 } else {
405 spin_lock_irqsave(&priv->lock, flags);
406 /* store the config in one byte, and later
407 use bit masks to check values */
408 priv->current_config = feature_buffer[4];
409 priv->baud_rate = get_unaligned_le32(feature_buffer);
410 spin_unlock_irqrestore(&priv->lock, flags);
411 }
412 }
413 spin_lock_irqsave(&priv->lock, flags);
414 ++priv->cmd_count;
415 spin_unlock_irqrestore(&priv->lock, flags);
416out:
417 kfree(feature_buffer);
418 return retval;
419} /* cypress_serial_control */
420
421
422static void cypress_set_dead(struct usb_serial_port *port)
423{
424 struct cypress_private *priv = usb_get_serial_port_data(port);
425 unsigned long flags;
426
427 spin_lock_irqsave(&priv->lock, flags);
428 if (!priv->comm_is_ok) {
429 spin_unlock_irqrestore(&priv->lock, flags);
430 return;
431 }
432 priv->comm_is_ok = 0;
433 spin_unlock_irqrestore(&priv->lock, flags);
434
435 dev_err(&port->dev, "cypress_m8 suspending failing port %d - "
436 "interval might be too short\n", port->port_number);
437}
438
439
440/*****************************************************************************
441 * Cypress serial driver functions
442 *****************************************************************************/
443
444
445static int cypress_generic_port_probe(struct usb_serial_port *port)
446{
447 struct usb_serial *serial = port->serial;
448 struct cypress_private *priv;
449
450 if (!port->interrupt_out_urb || !port->interrupt_in_urb) {
451 dev_err(&port->dev, "required endpoint is missing\n");
452 return -ENODEV;
453 }
454
455 priv = kzalloc(sizeof(struct cypress_private), GFP_KERNEL);
456 if (!priv)
457 return -ENOMEM;
458
459 priv->comm_is_ok = !0;
460 spin_lock_init(&priv->lock);
461 if (kfifo_alloc(&priv->write_fifo, CYPRESS_BUF_SIZE, GFP_KERNEL)) {
462 kfree(priv);
463 return -ENOMEM;
464 }
465
466 /* Skip reset for FRWD device. It is a workaound:
467 device hangs if it receives SET_CONFIGURE in Configured
468 state. */
469 if (!is_frwd(serial->dev))
470 usb_reset_configuration(serial->dev);
471
472 priv->cmd_ctrl = 0;
473 priv->line_control = 0;
474 priv->termios_initialized = 0;
475 priv->rx_flags = 0;
476 /* Default packet format setting is determined by packet size.
477 Anything with a size larger then 9 must have a separate
478 count field since the 3 bit count field is otherwise too
479 small. Otherwise we can use the slightly more compact
480 format. This is in accordance with the cypress_m8 serial
481 converter app note. */
482 if (port->interrupt_out_size > 9)
483 priv->pkt_fmt = packet_format_1;
484 else
485 priv->pkt_fmt = packet_format_2;
486
487 if (interval > 0) {
488 priv->write_urb_interval = interval;
489 priv->read_urb_interval = interval;
490 dev_dbg(&port->dev, "%s - read & write intervals forced to %d\n",
491 __func__, interval);
492 } else {
493 priv->write_urb_interval = port->interrupt_out_urb->interval;
494 priv->read_urb_interval = port->interrupt_in_urb->interval;
495 dev_dbg(&port->dev, "%s - intervals: read=%d write=%d\n",
496 __func__, priv->read_urb_interval,
497 priv->write_urb_interval);
498 }
499 usb_set_serial_port_data(port, priv);
500
501 port->port.drain_delay = 256;
502
503 return 0;
504}
505
506
507static int cypress_earthmate_port_probe(struct usb_serial_port *port)
508{
509 struct usb_serial *serial = port->serial;
510 struct cypress_private *priv;
511 int ret;
512
513 ret = cypress_generic_port_probe(port);
514 if (ret) {
515 dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__);
516 return ret;
517 }
518
519 priv = usb_get_serial_port_data(port);
520 priv->chiptype = CT_EARTHMATE;
521 /* All Earthmate devices use the separated-count packet
522 format! Idiotic. */
523 priv->pkt_fmt = packet_format_1;
524 if (serial->dev->descriptor.idProduct !=
525 cpu_to_le16(PRODUCT_ID_EARTHMATEUSB)) {
526 /* The old original USB Earthmate seemed able to
527 handle GET_CONFIG requests; everything they've
528 produced since that time crashes if this command is
529 attempted :-( */
530 dev_dbg(&port->dev,
531 "%s - Marking this device as unsafe for GET_CONFIG commands\n",
532 __func__);
533 priv->get_cfg_unsafe = !0;
534 }
535
536 return 0;
537}
538
539static int cypress_hidcom_port_probe(struct usb_serial_port *port)
540{
541 struct cypress_private *priv;
542 int ret;
543
544 ret = cypress_generic_port_probe(port);
545 if (ret) {
546 dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__);
547 return ret;
548 }
549
550 priv = usb_get_serial_port_data(port);
551 priv->chiptype = CT_CYPHIDCOM;
552
553 return 0;
554}
555
556static int cypress_ca42v2_port_probe(struct usb_serial_port *port)
557{
558 struct cypress_private *priv;
559 int ret;
560
561 ret = cypress_generic_port_probe(port);
562 if (ret) {
563 dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__);
564 return ret;
565 }
566
567 priv = usb_get_serial_port_data(port);
568 priv->chiptype = CT_CA42V2;
569
570 return 0;
571}
572
573static int cypress_port_remove(struct usb_serial_port *port)
574{
575 struct cypress_private *priv;
576
577 priv = usb_get_serial_port_data(port);
578
579 kfifo_free(&priv->write_fifo);
580 kfree(priv);
581
582 return 0;
583}
584
585static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port)
586{
587 struct cypress_private *priv = usb_get_serial_port_data(port);
588 struct usb_serial *serial = port->serial;
589 unsigned long flags;
590 int result = 0;
591
592 if (!priv->comm_is_ok)
593 return -EIO;
594
595 /* clear halts before open */
596 usb_clear_halt(serial->dev, 0x81);
597 usb_clear_halt(serial->dev, 0x02);
598
599 spin_lock_irqsave(&priv->lock, flags);
600 /* reset read/write statistics */
601 priv->bytes_in = 0;
602 priv->bytes_out = 0;
603 priv->cmd_count = 0;
604 priv->rx_flags = 0;
605 spin_unlock_irqrestore(&priv->lock, flags);
606
607 /* Set termios */
608 cypress_send(port);
609
610 if (tty)
611 cypress_set_termios(tty, port, &priv->tmp_termios);
612
613 /* setup the port and start reading from the device */
614 usb_fill_int_urb(port->interrupt_in_urb, serial->dev,
615 usb_rcvintpipe(serial->dev, port->interrupt_in_endpointAddress),
616 port->interrupt_in_urb->transfer_buffer,
617 port->interrupt_in_urb->transfer_buffer_length,
618 cypress_read_int_callback, port, priv->read_urb_interval);
619 result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
620
621 if (result) {
622 dev_err(&port->dev,
623 "%s - failed submitting read urb, error %d\n",
624 __func__, result);
625 cypress_set_dead(port);
626 }
627
628 return result;
629} /* cypress_open */
630
631static void cypress_dtr_rts(struct usb_serial_port *port, int on)
632{
633 struct cypress_private *priv = usb_get_serial_port_data(port);
634 /* drop dtr and rts */
635 spin_lock_irq(&priv->lock);
636 if (on == 0)
637 priv->line_control = 0;
638 else
639 priv->line_control = CONTROL_DTR | CONTROL_RTS;
640 priv->cmd_ctrl = 1;
641 spin_unlock_irq(&priv->lock);
642 cypress_write(NULL, port, NULL, 0);
643}
644
645static void cypress_close(struct usb_serial_port *port)
646{
647 struct cypress_private *priv = usb_get_serial_port_data(port);
648 unsigned long flags;
649
650 spin_lock_irqsave(&priv->lock, flags);
651 kfifo_reset_out(&priv->write_fifo);
652 spin_unlock_irqrestore(&priv->lock, flags);
653
654 dev_dbg(&port->dev, "%s - stopping urbs\n", __func__);
655 usb_kill_urb(port->interrupt_in_urb);
656 usb_kill_urb(port->interrupt_out_urb);
657
658 if (stats)
659 dev_info(&port->dev, "Statistics: %d Bytes In | %d Bytes Out | %d Commands Issued\n",
660 priv->bytes_in, priv->bytes_out, priv->cmd_count);
661} /* cypress_close */
662
663
664static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
665 const unsigned char *buf, int count)
666{
667 struct cypress_private *priv = usb_get_serial_port_data(port);
668
669 dev_dbg(&port->dev, "%s - %d bytes\n", __func__, count);
670
671 /* line control commands, which need to be executed immediately,
672 are not put into the buffer for obvious reasons.
673 */
674 if (priv->cmd_ctrl) {
675 count = 0;
676 goto finish;
677 }
678
679 if (!count)
680 return count;
681
682 count = kfifo_in_locked(&priv->write_fifo, buf, count, &priv->lock);
683
684finish:
685 cypress_send(port);
686
687 return count;
688} /* cypress_write */
689
690
691static void cypress_send(struct usb_serial_port *port)
692{
693 int count = 0, result, offset, actual_size;
694 struct cypress_private *priv = usb_get_serial_port_data(port);
695 struct device *dev = &port->dev;
696 unsigned long flags;
697
698 if (!priv->comm_is_ok)
699 return;
700
701 dev_dbg(dev, "%s - interrupt out size is %d\n", __func__,
702 port->interrupt_out_size);
703
704 spin_lock_irqsave(&priv->lock, flags);
705 if (priv->write_urb_in_use) {
706 dev_dbg(dev, "%s - can't write, urb in use\n", __func__);
707 spin_unlock_irqrestore(&priv->lock, flags);
708 return;
709 }
710 spin_unlock_irqrestore(&priv->lock, flags);
711
712 /* clear buffer */
713 memset(port->interrupt_out_urb->transfer_buffer, 0,
714 port->interrupt_out_size);
715
716 spin_lock_irqsave(&priv->lock, flags);
717 switch (priv->pkt_fmt) {
718 default:
719 case packet_format_1:
720 /* this is for the CY7C64013... */
721 offset = 2;
722 port->interrupt_out_buffer[0] = priv->line_control;
723 break;
724 case packet_format_2:
725 /* this is for the CY7C63743... */
726 offset = 1;
727 port->interrupt_out_buffer[0] = priv->line_control;
728 break;
729 }
730
731 if (priv->line_control & CONTROL_RESET)
732 priv->line_control &= ~CONTROL_RESET;
733
734 if (priv->cmd_ctrl) {
735 priv->cmd_count++;
736 dev_dbg(dev, "%s - line control command being issued\n", __func__);
737 spin_unlock_irqrestore(&priv->lock, flags);
738 goto send;
739 } else
740 spin_unlock_irqrestore(&priv->lock, flags);
741
742 count = kfifo_out_locked(&priv->write_fifo,
743 &port->interrupt_out_buffer[offset],
744 port->interrupt_out_size - offset,
745 &priv->lock);
746 if (count == 0)
747 return;
748
749 switch (priv->pkt_fmt) {
750 default:
751 case packet_format_1:
752 port->interrupt_out_buffer[1] = count;
753 break;
754 case packet_format_2:
755 port->interrupt_out_buffer[0] |= count;
756 }
757
758 dev_dbg(dev, "%s - count is %d\n", __func__, count);
759
760send:
761 spin_lock_irqsave(&priv->lock, flags);
762 priv->write_urb_in_use = 1;
763 spin_unlock_irqrestore(&priv->lock, flags);
764
765 if (priv->cmd_ctrl)
766 actual_size = 1;
767 else
768 actual_size = count +
769 (priv->pkt_fmt == packet_format_1 ? 2 : 1);
770
771 usb_serial_debug_data(dev, __func__, port->interrupt_out_size,
772 port->interrupt_out_urb->transfer_buffer);
773
774 usb_fill_int_urb(port->interrupt_out_urb, port->serial->dev,
775 usb_sndintpipe(port->serial->dev, port->interrupt_out_endpointAddress),
776 port->interrupt_out_buffer, port->interrupt_out_size,
777 cypress_write_int_callback, port, priv->write_urb_interval);
778 result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
779 if (result) {
780 dev_err_console(port,
781 "%s - failed submitting write urb, error %d\n",
782 __func__, result);
783 priv->write_urb_in_use = 0;
784 cypress_set_dead(port);
785 }
786
787 spin_lock_irqsave(&priv->lock, flags);
788 if (priv->cmd_ctrl)
789 priv->cmd_ctrl = 0;
790
791 /* do not count the line control and size bytes */
792 priv->bytes_out += count;
793 spin_unlock_irqrestore(&priv->lock, flags);
794
795 usb_serial_port_softint(port);
796} /* cypress_send */
797
798
799/* returns how much space is available in the soft buffer */
800static int cypress_write_room(struct tty_struct *tty)
801{
802 struct usb_serial_port *port = tty->driver_data;
803 struct cypress_private *priv = usb_get_serial_port_data(port);
804 int room = 0;
805 unsigned long flags;
806
807 spin_lock_irqsave(&priv->lock, flags);
808 room = kfifo_avail(&priv->write_fifo);
809 spin_unlock_irqrestore(&priv->lock, flags);
810
811 dev_dbg(&port->dev, "%s - returns %d\n", __func__, room);
812 return room;
813}
814
815
816static int cypress_tiocmget(struct tty_struct *tty)
817{
818 struct usb_serial_port *port = tty->driver_data;
819 struct cypress_private *priv = usb_get_serial_port_data(port);
820 __u8 status, control;
821 unsigned int result = 0;
822 unsigned long flags;
823
824 spin_lock_irqsave(&priv->lock, flags);
825 control = priv->line_control;
826 status = priv->current_status;
827 spin_unlock_irqrestore(&priv->lock, flags);
828
829 result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0)
830 | ((control & CONTROL_RTS) ? TIOCM_RTS : 0)
831 | ((status & UART_CTS) ? TIOCM_CTS : 0)
832 | ((status & UART_DSR) ? TIOCM_DSR : 0)
833 | ((status & UART_RI) ? TIOCM_RI : 0)
834 | ((status & UART_CD) ? TIOCM_CD : 0);
835
836 dev_dbg(&port->dev, "%s - result = %x\n", __func__, result);
837
838 return result;
839}
840
841
842static int cypress_tiocmset(struct tty_struct *tty,
843 unsigned int set, unsigned int clear)
844{
845 struct usb_serial_port *port = tty->driver_data;
846 struct cypress_private *priv = usb_get_serial_port_data(port);
847 unsigned long flags;
848
849 spin_lock_irqsave(&priv->lock, flags);
850 if (set & TIOCM_RTS)
851 priv->line_control |= CONTROL_RTS;
852 if (set & TIOCM_DTR)
853 priv->line_control |= CONTROL_DTR;
854 if (clear & TIOCM_RTS)
855 priv->line_control &= ~CONTROL_RTS;
856 if (clear & TIOCM_DTR)
857 priv->line_control &= ~CONTROL_DTR;
858 priv->cmd_ctrl = 1;
859 spin_unlock_irqrestore(&priv->lock, flags);
860
861 return cypress_write(tty, port, NULL, 0);
862}
863
864static void cypress_set_termios(struct tty_struct *tty,
865 struct usb_serial_port *port, struct ktermios *old_termios)
866{
867 struct cypress_private *priv = usb_get_serial_port_data(port);
868 struct device *dev = &port->dev;
869 int data_bits, stop_bits, parity_type, parity_enable;
870 unsigned cflag, iflag;
871 unsigned long flags;
872 __u8 oldlines;
873 int linechange = 0;
874
875 spin_lock_irqsave(&priv->lock, flags);
876 /* We can't clean this one up as we don't know the device type
877 early enough */
878 if (!priv->termios_initialized) {
879 if (priv->chiptype == CT_EARTHMATE) {
880 tty->termios = tty_std_termios;
881 tty->termios.c_cflag = B4800 | CS8 | CREAD | HUPCL |
882 CLOCAL;
883 tty->termios.c_ispeed = 4800;
884 tty->termios.c_ospeed = 4800;
885 } else if (priv->chiptype == CT_CYPHIDCOM) {
886 tty->termios = tty_std_termios;
887 tty->termios.c_cflag = B9600 | CS8 | CREAD | HUPCL |
888 CLOCAL;
889 tty->termios.c_ispeed = 9600;
890 tty->termios.c_ospeed = 9600;
891 } else if (priv->chiptype == CT_CA42V2) {
892 tty->termios = tty_std_termios;
893 tty->termios.c_cflag = B9600 | CS8 | CREAD | HUPCL |
894 CLOCAL;
895 tty->termios.c_ispeed = 9600;
896 tty->termios.c_ospeed = 9600;
897 }
898 priv->termios_initialized = 1;
899 }
900 spin_unlock_irqrestore(&priv->lock, flags);
901
902 /* Unsupported features need clearing */
903 tty->termios.c_cflag &= ~(CMSPAR|CRTSCTS);
904
905 cflag = tty->termios.c_cflag;
906 iflag = tty->termios.c_iflag;
907
908 /* check if there are new settings */
909 if (old_termios) {
910 spin_lock_irqsave(&priv->lock, flags);
911 priv->tmp_termios = tty->termios;
912 spin_unlock_irqrestore(&priv->lock, flags);
913 }
914
915 /* set number of data bits, parity, stop bits */
916 /* when parity is disabled the parity type bit is ignored */
917
918 /* 1 means 2 stop bits, 0 means 1 stop bit */
919 stop_bits = cflag & CSTOPB ? 1 : 0;
920
921 if (cflag & PARENB) {
922 parity_enable = 1;
923 /* 1 means odd parity, 0 means even parity */
924 parity_type = cflag & PARODD ? 1 : 0;
925 } else
926 parity_enable = parity_type = 0;
927
928 switch (cflag & CSIZE) {
929 case CS5:
930 data_bits = 0;
931 break;
932 case CS6:
933 data_bits = 1;
934 break;
935 case CS7:
936 data_bits = 2;
937 break;
938 case CS8:
939 data_bits = 3;
940 break;
941 default:
942 dev_err(dev, "%s - CSIZE was set, but not CS5-CS8\n", __func__);
943 data_bits = 3;
944 }
945 spin_lock_irqsave(&priv->lock, flags);
946 oldlines = priv->line_control;
947 if ((cflag & CBAUD) == B0) {
948 /* drop dtr and rts */
949 dev_dbg(dev, "%s - dropping the lines, baud rate 0bps\n", __func__);
950 priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
951 } else
952 priv->line_control = (CONTROL_DTR | CONTROL_RTS);
953 spin_unlock_irqrestore(&priv->lock, flags);
954
955 dev_dbg(dev, "%s - sending %d stop_bits, %d parity_enable, %d parity_type, %d data_bits (+5)\n",
956 __func__, stop_bits, parity_enable, parity_type, data_bits);
957
958 cypress_serial_control(tty, port, tty_get_baud_rate(tty),
959 data_bits, stop_bits,
960 parity_enable, parity_type,
961 0, CYPRESS_SET_CONFIG);
962
963 /* we perform a CYPRESS_GET_CONFIG so that the current settings are
964 * filled into the private structure this should confirm that all is
965 * working if it returns what we just set */
966 cypress_serial_control(tty, port, 0, 0, 0, 0, 0, 0, CYPRESS_GET_CONFIG);
967
968 /* Here we can define custom tty settings for devices; the main tty
969 * termios flag base comes from empeg.c */
970
971 spin_lock_irqsave(&priv->lock, flags);
972 if (priv->chiptype == CT_EARTHMATE && priv->baud_rate == 4800) {
973 dev_dbg(dev, "Using custom termios settings for a baud rate of 4800bps.\n");
974 /* define custom termios settings for NMEA protocol */
975
976 tty->termios.c_iflag /* input modes - */
977 &= ~(IGNBRK /* disable ignore break */
978 | BRKINT /* disable break causes interrupt */
979 | PARMRK /* disable mark parity errors */
980 | ISTRIP /* disable clear high bit of input char */
981 | INLCR /* disable translate NL to CR */
982 | IGNCR /* disable ignore CR */
983 | ICRNL /* disable translate CR to NL */
984 | IXON); /* disable enable XON/XOFF flow control */
985
986 tty->termios.c_oflag /* output modes */
987 &= ~OPOST; /* disable postprocess output char */
988
989 tty->termios.c_lflag /* line discipline modes */
990 &= ~(ECHO /* disable echo input characters */
991 | ECHONL /* disable echo new line */
992 | ICANON /* disable erase, kill, werase, and rprnt
993 special characters */
994 | ISIG /* disable interrupt, quit, and suspend
995 special characters */
996 | IEXTEN); /* disable non-POSIX special characters */
997 } /* CT_CYPHIDCOM: Application should handle this for device */
998
999 linechange = (priv->line_control != oldlines);
1000 spin_unlock_irqrestore(&priv->lock, flags);
1001
1002 /* if necessary, set lines */
1003 if (linechange) {
1004 priv->cmd_ctrl = 1;
1005 cypress_write(tty, port, NULL, 0);
1006 }
1007} /* cypress_set_termios */
1008
1009
1010/* returns amount of data still left in soft buffer */
1011static int cypress_chars_in_buffer(struct tty_struct *tty)
1012{
1013 struct usb_serial_port *port = tty->driver_data;
1014 struct cypress_private *priv = usb_get_serial_port_data(port);
1015 int chars = 0;
1016 unsigned long flags;
1017
1018 spin_lock_irqsave(&priv->lock, flags);
1019 chars = kfifo_len(&priv->write_fifo);
1020 spin_unlock_irqrestore(&priv->lock, flags);
1021
1022 dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars);
1023 return chars;
1024}
1025
1026
1027static void cypress_throttle(struct tty_struct *tty)
1028{
1029 struct usb_serial_port *port = tty->driver_data;
1030 struct cypress_private *priv = usb_get_serial_port_data(port);
1031
1032 spin_lock_irq(&priv->lock);
1033 priv->rx_flags = THROTTLED;
1034 spin_unlock_irq(&priv->lock);
1035}
1036
1037
1038static void cypress_unthrottle(struct tty_struct *tty)
1039{
1040 struct usb_serial_port *port = tty->driver_data;
1041 struct cypress_private *priv = usb_get_serial_port_data(port);
1042 int actually_throttled, result;
1043
1044 spin_lock_irq(&priv->lock);
1045 actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED;
1046 priv->rx_flags = 0;
1047 spin_unlock_irq(&priv->lock);
1048
1049 if (!priv->comm_is_ok)
1050 return;
1051
1052 if (actually_throttled) {
1053 result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
1054 if (result) {
1055 dev_err(&port->dev, "%s - failed submitting read urb, "
1056 "error %d\n", __func__, result);
1057 cypress_set_dead(port);
1058 }
1059 }
1060}
1061
1062
1063static void cypress_read_int_callback(struct urb *urb)
1064{
1065 struct usb_serial_port *port = urb->context;
1066 struct cypress_private *priv = usb_get_serial_port_data(port);
1067 struct device *dev = &urb->dev->dev;
1068 struct tty_struct *tty;
1069 unsigned char *data = urb->transfer_buffer;
1070 unsigned long flags;
1071 char tty_flag = TTY_NORMAL;
1072 int havedata = 0;
1073 int bytes = 0;
1074 int result;
1075 int i = 0;
1076 int status = urb->status;
1077
1078 switch (status) {
1079 case 0: /* success */
1080 break;
1081 case -ECONNRESET:
1082 case -ENOENT:
1083 case -ESHUTDOWN:
1084 /* precursor to disconnect so just go away */
1085 return;
1086 case -EPIPE:
1087 /* Can't call usb_clear_halt while in_interrupt */
1088 /* FALLS THROUGH */
1089 default:
1090 /* something ugly is going on... */
1091 dev_err(dev, "%s - unexpected nonzero read status received: %d\n",
1092 __func__, status);
1093 cypress_set_dead(port);
1094 return;
1095 }
1096
1097 spin_lock_irqsave(&priv->lock, flags);
1098 if (priv->rx_flags & THROTTLED) {
1099 dev_dbg(dev, "%s - now throttling\n", __func__);
1100 priv->rx_flags |= ACTUALLY_THROTTLED;
1101 spin_unlock_irqrestore(&priv->lock, flags);
1102 return;
1103 }
1104 spin_unlock_irqrestore(&priv->lock, flags);
1105
1106 tty = tty_port_tty_get(&port->port);
1107 if (!tty) {
1108 dev_dbg(dev, "%s - bad tty pointer - exiting\n", __func__);
1109 return;
1110 }
1111
1112 spin_lock_irqsave(&priv->lock, flags);
1113 result = urb->actual_length;
1114 switch (priv->pkt_fmt) {
1115 default:
1116 case packet_format_1:
1117 /* This is for the CY7C64013... */
1118 priv->current_status = data[0] & 0xF8;
1119 bytes = data[1] + 2;
1120 i = 2;
1121 if (bytes > 2)
1122 havedata = 1;
1123 break;
1124 case packet_format_2:
1125 /* This is for the CY7C63743... */
1126 priv->current_status = data[0] & 0xF8;
1127 bytes = (data[0] & 0x07) + 1;
1128 i = 1;
1129 if (bytes > 1)
1130 havedata = 1;
1131 break;
1132 }
1133 spin_unlock_irqrestore(&priv->lock, flags);
1134 if (result < bytes) {
1135 dev_dbg(dev,
1136 "%s - wrong packet size - received %d bytes but packet said %d bytes\n",
1137 __func__, result, bytes);
1138 goto continue_read;
1139 }
1140
1141 usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data);
1142
1143 spin_lock_irqsave(&priv->lock, flags);
1144 /* check to see if status has changed */
1145 if (priv->current_status != priv->prev_status) {
1146 u8 delta = priv->current_status ^ priv->prev_status;
1147
1148 if (delta & UART_MSR_MASK) {
1149 if (delta & UART_CTS)
1150 port->icount.cts++;
1151 if (delta & UART_DSR)
1152 port->icount.dsr++;
1153 if (delta & UART_RI)
1154 port->icount.rng++;
1155 if (delta & UART_CD)
1156 port->icount.dcd++;
1157
1158 wake_up_interruptible(&port->port.delta_msr_wait);
1159 }
1160
1161 priv->prev_status = priv->current_status;
1162 }
1163 spin_unlock_irqrestore(&priv->lock, flags);
1164
1165 /* hangup, as defined in acm.c... this might be a bad place for it
1166 * though */
1167 if (tty && !C_CLOCAL(tty) && !(priv->current_status & UART_CD)) {
1168 dev_dbg(dev, "%s - calling hangup\n", __func__);
1169 tty_hangup(tty);
1170 goto continue_read;
1171 }
1172
1173 /* There is one error bit... I'm assuming it is a parity error
1174 * indicator as the generic firmware will set this bit to 1 if a
1175 * parity error occurs.
1176 * I can not find reference to any other error events. */
1177 spin_lock_irqsave(&priv->lock, flags);
1178 if (priv->current_status & CYP_ERROR) {
1179 spin_unlock_irqrestore(&priv->lock, flags);
1180 tty_flag = TTY_PARITY;
1181 dev_dbg(dev, "%s - Parity Error detected\n", __func__);
1182 } else
1183 spin_unlock_irqrestore(&priv->lock, flags);
1184
1185 /* process read if there is data other than line status */
1186 if (bytes > i) {
1187 tty_insert_flip_string_fixed_flag(&port->port, data + i,
1188 tty_flag, bytes - i);
1189 tty_flip_buffer_push(&port->port);
1190 }
1191
1192 spin_lock_irqsave(&priv->lock, flags);
1193 /* control and status byte(s) are also counted */
1194 priv->bytes_in += bytes;
1195 spin_unlock_irqrestore(&priv->lock, flags);
1196
1197continue_read:
1198 tty_kref_put(tty);
1199
1200 /* Continue trying to always read */
1201
1202 if (priv->comm_is_ok) {
1203 usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev,
1204 usb_rcvintpipe(port->serial->dev,
1205 port->interrupt_in_endpointAddress),
1206 port->interrupt_in_urb->transfer_buffer,
1207 port->interrupt_in_urb->transfer_buffer_length,
1208 cypress_read_int_callback, port,
1209 priv->read_urb_interval);
1210 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
1211 if (result && result != -EPERM) {
1212 dev_err(dev, "%s - failed resubmitting read urb, error %d\n",
1213 __func__, result);
1214 cypress_set_dead(port);
1215 }
1216 }
1217} /* cypress_read_int_callback */
1218
1219
1220static void cypress_write_int_callback(struct urb *urb)
1221{
1222 struct usb_serial_port *port = urb->context;
1223 struct cypress_private *priv = usb_get_serial_port_data(port);
1224 struct device *dev = &urb->dev->dev;
1225 int status = urb->status;
1226
1227 switch (status) {
1228 case 0:
1229 /* success */
1230 break;
1231 case -ECONNRESET:
1232 case -ENOENT:
1233 case -ESHUTDOWN:
1234 /* this urb is terminated, clean up */
1235 dev_dbg(dev, "%s - urb shutting down with status: %d\n",
1236 __func__, status);
1237 priv->write_urb_in_use = 0;
1238 return;
1239 case -EPIPE:
1240 /* Cannot call usb_clear_halt while in_interrupt */
1241 /* FALLTHROUGH */
1242 default:
1243 dev_err(dev, "%s - unexpected nonzero write status received: %d\n",
1244 __func__, status);
1245 cypress_set_dead(port);
1246 break;
1247 }
1248 priv->write_urb_in_use = 0;
1249
1250 /* send any buffered data */
1251 cypress_send(port);
1252}
1253
1254module_usb_serial_driver(serial_drivers, id_table_combined);
1255
1256MODULE_AUTHOR(DRIVER_AUTHOR);
1257MODULE_DESCRIPTION(DRIVER_DESC);
1258MODULE_LICENSE("GPL");
1259
1260module_param(stats, bool, S_IRUGO | S_IWUSR);
1261MODULE_PARM_DESC(stats, "Enable statistics or not");
1262module_param(interval, int, S_IRUGO | S_IWUSR);
1263MODULE_PARM_DESC(interval, "Overrides interrupt interval");
1264module_param(unstable_bauds, bool, S_IRUGO | S_IWUSR);
1265MODULE_PARM_DESC(unstable_bauds, "Allow unstable baud rates");
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * USB Cypress M8 driver
4 *
5 * Copyright (C) 2004
6 * Lonnie Mendez (dignome@gmail.com)
7 * Copyright (C) 2003,2004
8 * Neil Whelchel (koyama@firstlight.net)
9 *
10 * See Documentation/usb/usb-serial.rst for more information on using this
11 * driver
12 *
13 * See http://geocities.com/i0xox0i for information on this driver and the
14 * earthmate usb device.
15 */
16
17/* Thanks to Neil Whelchel for writing the first cypress m8 implementation
18 for linux. */
19/* Thanks to cypress for providing references for the hid reports. */
20/* Thanks to Jiang Zhang for providing links and for general help. */
21/* Code originates and was built up from ftdi_sio, belkin, pl2303 and others.*/
22
23
24#include <linux/kernel.h>
25#include <linux/errno.h>
26#include <linux/slab.h>
27#include <linux/tty.h>
28#include <linux/tty_driver.h>
29#include <linux/tty_flip.h>
30#include <linux/module.h>
31#include <linux/moduleparam.h>
32#include <linux/spinlock.h>
33#include <linux/usb.h>
34#include <linux/usb/serial.h>
35#include <linux/serial.h>
36#include <linux/kfifo.h>
37#include <linux/delay.h>
38#include <linux/uaccess.h>
39#include <linux/unaligned.h>
40
41#include "cypress_m8.h"
42
43
44static bool stats;
45static int interval;
46static bool unstable_bauds;
47
48#define DRIVER_AUTHOR "Lonnie Mendez <dignome@gmail.com>, Neil Whelchel <koyama@firstlight.net>"
49#define DRIVER_DESC "Cypress USB to Serial Driver"
50
51/* write buffer size defines */
52#define CYPRESS_BUF_SIZE 1024
53
54static const struct usb_device_id id_table_earthmate[] = {
55 { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
56 { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
57 { } /* Terminating entry */
58};
59
60static const struct usb_device_id id_table_cyphidcomrs232[] = {
61 { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
62 { USB_DEVICE(VENDOR_ID_SAI, PRODUCT_ID_CYPHIDCOM) },
63 { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
64 { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) },
65 { } /* Terminating entry */
66};
67
68static const struct usb_device_id id_table_nokiaca42v2[] = {
69 { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
70 { } /* Terminating entry */
71};
72
73static const struct usb_device_id id_table_combined[] = {
74 { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
75 { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
76 { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
77 { USB_DEVICE(VENDOR_ID_SAI, PRODUCT_ID_CYPHIDCOM) },
78 { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
79 { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) },
80 { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
81 { } /* Terminating entry */
82};
83
84MODULE_DEVICE_TABLE(usb, id_table_combined);
85
86enum packet_format {
87 packet_format_1, /* b0:status, b1:payload count */
88 packet_format_2 /* b0[7:3]:status, b0[2:0]:payload count */
89};
90
91struct cypress_private {
92 spinlock_t lock; /* private lock */
93 int chiptype; /* identifier of device, for quirks/etc */
94 int bytes_in; /* used for statistics */
95 int bytes_out; /* used for statistics */
96 int cmd_count; /* used for statistics */
97 int cmd_ctrl; /* always set this to 1 before issuing a command */
98 struct kfifo write_fifo; /* write fifo */
99 int write_urb_in_use; /* write urb in use indicator */
100 int write_urb_interval; /* interval to use for write urb */
101 int read_urb_interval; /* interval to use for read urb */
102 int comm_is_ok; /* true if communication is (still) ok */
103 __u8 line_control; /* holds dtr / rts value */
104 __u8 current_status; /* received from last read - info on dsr,cts,cd,ri,etc */
105 __u8 current_config; /* stores the current configuration byte */
106 __u8 rx_flags; /* throttling - used from whiteheat/ftdi_sio */
107 enum packet_format pkt_fmt; /* format to use for packet send / receive */
108 int get_cfg_unsafe; /* If true, the CYPRESS_GET_CONFIG is unsafe */
109 int baud_rate; /* stores current baud rate in
110 integer form */
111 char prev_status; /* used for TIOCMIWAIT */
112};
113
114/* function prototypes for the Cypress USB to serial device */
115static int cypress_earthmate_port_probe(struct usb_serial_port *port);
116static int cypress_hidcom_port_probe(struct usb_serial_port *port);
117static int cypress_ca42v2_port_probe(struct usb_serial_port *port);
118static void cypress_port_remove(struct usb_serial_port *port);
119static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port);
120static void cypress_close(struct usb_serial_port *port);
121static void cypress_dtr_rts(struct usb_serial_port *port, int on);
122static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
123 const unsigned char *buf, int count);
124static void cypress_send(struct usb_serial_port *port);
125static unsigned int cypress_write_room(struct tty_struct *tty);
126static void cypress_earthmate_init_termios(struct tty_struct *tty);
127static void cypress_set_termios(struct tty_struct *tty,
128 struct usb_serial_port *port,
129 const struct ktermios *old_termios);
130static int cypress_tiocmget(struct tty_struct *tty);
131static int cypress_tiocmset(struct tty_struct *tty,
132 unsigned int set, unsigned int clear);
133static unsigned int cypress_chars_in_buffer(struct tty_struct *tty);
134static void cypress_throttle(struct tty_struct *tty);
135static void cypress_unthrottle(struct tty_struct *tty);
136static void cypress_set_dead(struct usb_serial_port *port);
137static void cypress_read_int_callback(struct urb *urb);
138static void cypress_write_int_callback(struct urb *urb);
139
140static struct usb_serial_driver cypress_earthmate_device = {
141 .driver = {
142 .name = "earthmate",
143 },
144 .description = "DeLorme Earthmate USB",
145 .id_table = id_table_earthmate,
146 .num_ports = 1,
147 .port_probe = cypress_earthmate_port_probe,
148 .port_remove = cypress_port_remove,
149 .open = cypress_open,
150 .close = cypress_close,
151 .dtr_rts = cypress_dtr_rts,
152 .write = cypress_write,
153 .write_room = cypress_write_room,
154 .init_termios = cypress_earthmate_init_termios,
155 .set_termios = cypress_set_termios,
156 .tiocmget = cypress_tiocmget,
157 .tiocmset = cypress_tiocmset,
158 .tiocmiwait = usb_serial_generic_tiocmiwait,
159 .chars_in_buffer = cypress_chars_in_buffer,
160 .throttle = cypress_throttle,
161 .unthrottle = cypress_unthrottle,
162 .read_int_callback = cypress_read_int_callback,
163 .write_int_callback = cypress_write_int_callback,
164};
165
166static struct usb_serial_driver cypress_hidcom_device = {
167 .driver = {
168 .name = "cyphidcom",
169 },
170 .description = "HID->COM RS232 Adapter",
171 .id_table = id_table_cyphidcomrs232,
172 .num_ports = 1,
173 .port_probe = cypress_hidcom_port_probe,
174 .port_remove = cypress_port_remove,
175 .open = cypress_open,
176 .close = cypress_close,
177 .dtr_rts = cypress_dtr_rts,
178 .write = cypress_write,
179 .write_room = cypress_write_room,
180 .set_termios = cypress_set_termios,
181 .tiocmget = cypress_tiocmget,
182 .tiocmset = cypress_tiocmset,
183 .tiocmiwait = usb_serial_generic_tiocmiwait,
184 .chars_in_buffer = cypress_chars_in_buffer,
185 .throttle = cypress_throttle,
186 .unthrottle = cypress_unthrottle,
187 .read_int_callback = cypress_read_int_callback,
188 .write_int_callback = cypress_write_int_callback,
189};
190
191static struct usb_serial_driver cypress_ca42v2_device = {
192 .driver = {
193 .name = "nokiaca42v2",
194 },
195 .description = "Nokia CA-42 V2 Adapter",
196 .id_table = id_table_nokiaca42v2,
197 .num_ports = 1,
198 .port_probe = cypress_ca42v2_port_probe,
199 .port_remove = cypress_port_remove,
200 .open = cypress_open,
201 .close = cypress_close,
202 .dtr_rts = cypress_dtr_rts,
203 .write = cypress_write,
204 .write_room = cypress_write_room,
205 .set_termios = cypress_set_termios,
206 .tiocmget = cypress_tiocmget,
207 .tiocmset = cypress_tiocmset,
208 .tiocmiwait = usb_serial_generic_tiocmiwait,
209 .chars_in_buffer = cypress_chars_in_buffer,
210 .throttle = cypress_throttle,
211 .unthrottle = cypress_unthrottle,
212 .read_int_callback = cypress_read_int_callback,
213 .write_int_callback = cypress_write_int_callback,
214};
215
216static struct usb_serial_driver * const serial_drivers[] = {
217 &cypress_earthmate_device, &cypress_hidcom_device,
218 &cypress_ca42v2_device, NULL
219};
220
221/*****************************************************************************
222 * Cypress serial helper functions
223 *****************************************************************************/
224
225/* FRWD Dongle hidcom needs to skip reset and speed checks */
226static inline bool is_frwd(struct usb_device *dev)
227{
228 return ((le16_to_cpu(dev->descriptor.idVendor) == VENDOR_ID_FRWD) &&
229 (le16_to_cpu(dev->descriptor.idProduct) == PRODUCT_ID_CYPHIDCOM_FRWD));
230}
231
232static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
233{
234 struct cypress_private *priv;
235 priv = usb_get_serial_port_data(port);
236
237 if (unstable_bauds)
238 return new_rate;
239
240 /* FRWD Dongle uses 115200 bps */
241 if (is_frwd(port->serial->dev))
242 return new_rate;
243
244 /*
245 * The general purpose firmware for the Cypress M8 allows for
246 * a maximum speed of 57600bps (I have no idea whether DeLorme
247 * chose to use the general purpose firmware or not), if you
248 * need to modify this speed setting for your own project
249 * please add your own chiptype and modify the code likewise.
250 * The Cypress HID->COM device will work successfully up to
251 * 115200bps (but the actual throughput is around 3kBps).
252 */
253 if (port->serial->dev->speed == USB_SPEED_LOW) {
254 /*
255 * Mike Isely <isely@pobox.com> 2-Feb-2008: The
256 * Cypress app note that describes this mechanism
257 * states that the low-speed part can't handle more
258 * than 800 bytes/sec, in which case 4800 baud is the
259 * safest speed for a part like that.
260 */
261 if (new_rate > 4800) {
262 dev_dbg(&port->dev,
263 "%s - failed setting baud rate, device incapable speed %d\n",
264 __func__, new_rate);
265 return -1;
266 }
267 }
268 switch (priv->chiptype) {
269 case CT_EARTHMATE:
270 if (new_rate <= 600) {
271 /* 300 and 600 baud rates are supported under
272 * the generic firmware, but are not used with
273 * NMEA and SiRF protocols */
274 dev_dbg(&port->dev,
275 "%s - failed setting baud rate, unsupported speed of %d on Earthmate GPS\n",
276 __func__, new_rate);
277 return -1;
278 }
279 break;
280 default:
281 break;
282 }
283 return new_rate;
284}
285
286
287/* This function can either set or retrieve the current serial line settings */
288static int cypress_serial_control(struct tty_struct *tty,
289 struct usb_serial_port *port, speed_t baud_rate, int data_bits,
290 int stop_bits, int parity_enable, int parity_type, int reset,
291 int cypress_request_type)
292{
293 int new_baudrate = 0, retval = 0, tries = 0;
294 struct cypress_private *priv;
295 struct device *dev = &port->dev;
296 u8 *feature_buffer;
297 const unsigned int feature_len = 5;
298 unsigned long flags;
299
300 priv = usb_get_serial_port_data(port);
301
302 if (!priv->comm_is_ok)
303 return -ENODEV;
304
305 feature_buffer = kcalloc(feature_len, sizeof(u8), GFP_KERNEL);
306 if (!feature_buffer)
307 return -ENOMEM;
308
309 switch (cypress_request_type) {
310 case CYPRESS_SET_CONFIG:
311 /* 0 means 'Hang up' so doesn't change the true bit rate */
312 new_baudrate = priv->baud_rate;
313 if (baud_rate && baud_rate != priv->baud_rate) {
314 dev_dbg(dev, "%s - baud rate is changing\n", __func__);
315 retval = analyze_baud_rate(port, baud_rate);
316 if (retval >= 0) {
317 new_baudrate = retval;
318 dev_dbg(dev, "%s - New baud rate set to %d\n",
319 __func__, new_baudrate);
320 }
321 }
322 dev_dbg(dev, "%s - baud rate is being sent as %d\n", __func__,
323 new_baudrate);
324
325 /* fill the feature_buffer with new configuration */
326 put_unaligned_le32(new_baudrate, feature_buffer);
327 feature_buffer[4] |= data_bits - 5; /* assign data bits in 2 bit space ( max 3 ) */
328 /* 1 bit gap */
329 feature_buffer[4] |= (stop_bits << 3); /* assign stop bits in 1 bit space */
330 feature_buffer[4] |= (parity_enable << 4); /* assign parity flag in 1 bit space */
331 feature_buffer[4] |= (parity_type << 5); /* assign parity type in 1 bit space */
332 /* 1 bit gap */
333 feature_buffer[4] |= (reset << 7); /* assign reset at end of byte, 1 bit space */
334
335 dev_dbg(dev, "%s - device is being sent this feature report:\n", __func__);
336 dev_dbg(dev, "%s - %02X - %02X - %02X - %02X - %02X\n", __func__,
337 feature_buffer[0], feature_buffer[1],
338 feature_buffer[2], feature_buffer[3],
339 feature_buffer[4]);
340
341 do {
342 retval = usb_control_msg(port->serial->dev,
343 usb_sndctrlpipe(port->serial->dev, 0),
344 HID_REQ_SET_REPORT,
345 USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
346 0x0300, 0, feature_buffer,
347 feature_len, 500);
348
349 if (tries++ >= 3)
350 break;
351
352 } while (retval != feature_len &&
353 retval != -ENODEV);
354
355 if (retval != feature_len) {
356 dev_err(dev, "%s - failed sending serial line settings - %d\n",
357 __func__, retval);
358 cypress_set_dead(port);
359 } else {
360 spin_lock_irqsave(&priv->lock, flags);
361 priv->baud_rate = new_baudrate;
362 priv->current_config = feature_buffer[4];
363 spin_unlock_irqrestore(&priv->lock, flags);
364 /* If we asked for a speed change encode it */
365 if (baud_rate)
366 tty_encode_baud_rate(tty,
367 new_baudrate, new_baudrate);
368 }
369 break;
370 case CYPRESS_GET_CONFIG:
371 if (priv->get_cfg_unsafe) {
372 /* Not implemented for this device,
373 and if we try to do it we're likely
374 to crash the hardware. */
375 retval = -ENOTTY;
376 goto out;
377 }
378 dev_dbg(dev, "%s - retrieving serial line settings\n", __func__);
379 do {
380 retval = usb_control_msg(port->serial->dev,
381 usb_rcvctrlpipe(port->serial->dev, 0),
382 HID_REQ_GET_REPORT,
383 USB_DIR_IN | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
384 0x0300, 0, feature_buffer,
385 feature_len, 500);
386
387 if (tries++ >= 3)
388 break;
389 } while (retval != feature_len
390 && retval != -ENODEV);
391
392 if (retval != feature_len) {
393 dev_err(dev, "%s - failed to retrieve serial line settings - %d\n",
394 __func__, retval);
395 cypress_set_dead(port);
396 goto out;
397 } else {
398 spin_lock_irqsave(&priv->lock, flags);
399 /* store the config in one byte, and later
400 use bit masks to check values */
401 priv->current_config = feature_buffer[4];
402 priv->baud_rate = get_unaligned_le32(feature_buffer);
403 spin_unlock_irqrestore(&priv->lock, flags);
404 }
405 }
406 spin_lock_irqsave(&priv->lock, flags);
407 ++priv->cmd_count;
408 spin_unlock_irqrestore(&priv->lock, flags);
409out:
410 kfree(feature_buffer);
411 return retval;
412} /* cypress_serial_control */
413
414
415static void cypress_set_dead(struct usb_serial_port *port)
416{
417 struct cypress_private *priv = usb_get_serial_port_data(port);
418 unsigned long flags;
419
420 spin_lock_irqsave(&priv->lock, flags);
421 if (!priv->comm_is_ok) {
422 spin_unlock_irqrestore(&priv->lock, flags);
423 return;
424 }
425 priv->comm_is_ok = 0;
426 spin_unlock_irqrestore(&priv->lock, flags);
427
428 dev_err(&port->dev, "cypress_m8 suspending failing port %d - "
429 "interval might be too short\n", port->port_number);
430}
431
432
433/*****************************************************************************
434 * Cypress serial driver functions
435 *****************************************************************************/
436
437
438static int cypress_generic_port_probe(struct usb_serial_port *port)
439{
440 struct usb_serial *serial = port->serial;
441 struct cypress_private *priv;
442
443 if (!port->interrupt_out_urb || !port->interrupt_in_urb) {
444 dev_err(&port->dev, "required endpoint is missing\n");
445 return -ENODEV;
446 }
447
448 priv = kzalloc(sizeof(struct cypress_private), GFP_KERNEL);
449 if (!priv)
450 return -ENOMEM;
451
452 priv->comm_is_ok = !0;
453 spin_lock_init(&priv->lock);
454 if (kfifo_alloc(&priv->write_fifo, CYPRESS_BUF_SIZE, GFP_KERNEL)) {
455 kfree(priv);
456 return -ENOMEM;
457 }
458
459 /* Skip reset for FRWD device. It is a workaound:
460 device hangs if it receives SET_CONFIGURE in Configured
461 state. */
462 if (!is_frwd(serial->dev))
463 usb_reset_configuration(serial->dev);
464
465 priv->cmd_ctrl = 0;
466 priv->line_control = 0;
467 priv->rx_flags = 0;
468 /* Default packet format setting is determined by packet size.
469 Anything with a size larger then 9 must have a separate
470 count field since the 3 bit count field is otherwise too
471 small. Otherwise we can use the slightly more compact
472 format. This is in accordance with the cypress_m8 serial
473 converter app note. */
474 if (port->interrupt_out_size > 9)
475 priv->pkt_fmt = packet_format_1;
476 else
477 priv->pkt_fmt = packet_format_2;
478
479 if (interval > 0) {
480 priv->write_urb_interval = interval;
481 priv->read_urb_interval = interval;
482 dev_dbg(&port->dev, "%s - read & write intervals forced to %d\n",
483 __func__, interval);
484 } else {
485 priv->write_urb_interval = port->interrupt_out_urb->interval;
486 priv->read_urb_interval = port->interrupt_in_urb->interval;
487 dev_dbg(&port->dev, "%s - intervals: read=%d write=%d\n",
488 __func__, priv->read_urb_interval,
489 priv->write_urb_interval);
490 }
491 usb_set_serial_port_data(port, priv);
492
493 port->port.drain_delay = 256;
494
495 return 0;
496}
497
498
499static int cypress_earthmate_port_probe(struct usb_serial_port *port)
500{
501 struct usb_serial *serial = port->serial;
502 struct cypress_private *priv;
503 int ret;
504
505 ret = cypress_generic_port_probe(port);
506 if (ret) {
507 dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__);
508 return ret;
509 }
510
511 priv = usb_get_serial_port_data(port);
512 priv->chiptype = CT_EARTHMATE;
513 /* All Earthmate devices use the separated-count packet
514 format! Idiotic. */
515 priv->pkt_fmt = packet_format_1;
516 if (serial->dev->descriptor.idProduct !=
517 cpu_to_le16(PRODUCT_ID_EARTHMATEUSB)) {
518 /* The old original USB Earthmate seemed able to
519 handle GET_CONFIG requests; everything they've
520 produced since that time crashes if this command is
521 attempted :-( */
522 dev_dbg(&port->dev,
523 "%s - Marking this device as unsafe for GET_CONFIG commands\n",
524 __func__);
525 priv->get_cfg_unsafe = !0;
526 }
527
528 return 0;
529}
530
531static int cypress_hidcom_port_probe(struct usb_serial_port *port)
532{
533 struct cypress_private *priv;
534 int ret;
535
536 ret = cypress_generic_port_probe(port);
537 if (ret) {
538 dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__);
539 return ret;
540 }
541
542 priv = usb_get_serial_port_data(port);
543 priv->chiptype = CT_CYPHIDCOM;
544
545 return 0;
546}
547
548static int cypress_ca42v2_port_probe(struct usb_serial_port *port)
549{
550 struct cypress_private *priv;
551 int ret;
552
553 ret = cypress_generic_port_probe(port);
554 if (ret) {
555 dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__);
556 return ret;
557 }
558
559 priv = usb_get_serial_port_data(port);
560 priv->chiptype = CT_CA42V2;
561
562 return 0;
563}
564
565static void cypress_port_remove(struct usb_serial_port *port)
566{
567 struct cypress_private *priv;
568
569 priv = usb_get_serial_port_data(port);
570
571 kfifo_free(&priv->write_fifo);
572 kfree(priv);
573}
574
575static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port)
576{
577 struct cypress_private *priv = usb_get_serial_port_data(port);
578 struct usb_serial *serial = port->serial;
579 unsigned long flags;
580 int result = 0;
581
582 if (!priv->comm_is_ok)
583 return -EIO;
584
585 /* clear halts before open */
586 usb_clear_halt(serial->dev, 0x81);
587 usb_clear_halt(serial->dev, 0x02);
588
589 spin_lock_irqsave(&priv->lock, flags);
590 /* reset read/write statistics */
591 priv->bytes_in = 0;
592 priv->bytes_out = 0;
593 priv->cmd_count = 0;
594 priv->rx_flags = 0;
595 spin_unlock_irqrestore(&priv->lock, flags);
596
597 /* Set termios */
598 cypress_send(port);
599
600 if (tty)
601 cypress_set_termios(tty, port, NULL);
602
603 /* setup the port and start reading from the device */
604 usb_fill_int_urb(port->interrupt_in_urb, serial->dev,
605 usb_rcvintpipe(serial->dev, port->interrupt_in_endpointAddress),
606 port->interrupt_in_urb->transfer_buffer,
607 port->interrupt_in_urb->transfer_buffer_length,
608 cypress_read_int_callback, port, priv->read_urb_interval);
609 result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
610
611 if (result) {
612 dev_err(&port->dev,
613 "%s - failed submitting read urb, error %d\n",
614 __func__, result);
615 cypress_set_dead(port);
616 }
617
618 return result;
619} /* cypress_open */
620
621static void cypress_dtr_rts(struct usb_serial_port *port, int on)
622{
623 struct cypress_private *priv = usb_get_serial_port_data(port);
624 /* drop dtr and rts */
625 spin_lock_irq(&priv->lock);
626 if (on == 0)
627 priv->line_control = 0;
628 else
629 priv->line_control = CONTROL_DTR | CONTROL_RTS;
630 priv->cmd_ctrl = 1;
631 spin_unlock_irq(&priv->lock);
632 cypress_write(NULL, port, NULL, 0);
633}
634
635static void cypress_close(struct usb_serial_port *port)
636{
637 struct cypress_private *priv = usb_get_serial_port_data(port);
638 unsigned long flags;
639
640 spin_lock_irqsave(&priv->lock, flags);
641 kfifo_reset_out(&priv->write_fifo);
642 spin_unlock_irqrestore(&priv->lock, flags);
643
644 dev_dbg(&port->dev, "%s - stopping urbs\n", __func__);
645 usb_kill_urb(port->interrupt_in_urb);
646 usb_kill_urb(port->interrupt_out_urb);
647
648 if (stats)
649 dev_info(&port->dev, "Statistics: %d Bytes In | %d Bytes Out | %d Commands Issued\n",
650 priv->bytes_in, priv->bytes_out, priv->cmd_count);
651} /* cypress_close */
652
653
654static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
655 const unsigned char *buf, int count)
656{
657 struct cypress_private *priv = usb_get_serial_port_data(port);
658
659 dev_dbg(&port->dev, "%s - %d bytes\n", __func__, count);
660
661 /* line control commands, which need to be executed immediately,
662 are not put into the buffer for obvious reasons.
663 */
664 if (priv->cmd_ctrl) {
665 count = 0;
666 goto finish;
667 }
668
669 if (!count)
670 return count;
671
672 count = kfifo_in_locked(&priv->write_fifo, buf, count, &priv->lock);
673
674finish:
675 cypress_send(port);
676
677 return count;
678} /* cypress_write */
679
680
681static void cypress_send(struct usb_serial_port *port)
682{
683 int count = 0, result, offset, actual_size;
684 struct cypress_private *priv = usb_get_serial_port_data(port);
685 struct device *dev = &port->dev;
686 unsigned long flags;
687
688 if (!priv->comm_is_ok)
689 return;
690
691 dev_dbg(dev, "%s - interrupt out size is %d\n", __func__,
692 port->interrupt_out_size);
693
694 spin_lock_irqsave(&priv->lock, flags);
695 if (priv->write_urb_in_use) {
696 dev_dbg(dev, "%s - can't write, urb in use\n", __func__);
697 spin_unlock_irqrestore(&priv->lock, flags);
698 return;
699 }
700 spin_unlock_irqrestore(&priv->lock, flags);
701
702 /* clear buffer */
703 memset(port->interrupt_out_urb->transfer_buffer, 0,
704 port->interrupt_out_size);
705
706 spin_lock_irqsave(&priv->lock, flags);
707 switch (priv->pkt_fmt) {
708 default:
709 case packet_format_1:
710 /* this is for the CY7C64013... */
711 offset = 2;
712 port->interrupt_out_buffer[0] = priv->line_control;
713 break;
714 case packet_format_2:
715 /* this is for the CY7C63743... */
716 offset = 1;
717 port->interrupt_out_buffer[0] = priv->line_control;
718 break;
719 }
720
721 if (priv->line_control & CONTROL_RESET)
722 priv->line_control &= ~CONTROL_RESET;
723
724 if (priv->cmd_ctrl) {
725 priv->cmd_count++;
726 dev_dbg(dev, "%s - line control command being issued\n", __func__);
727 spin_unlock_irqrestore(&priv->lock, flags);
728 goto send;
729 } else
730 spin_unlock_irqrestore(&priv->lock, flags);
731
732 count = kfifo_out_locked(&priv->write_fifo,
733 &port->interrupt_out_buffer[offset],
734 port->interrupt_out_size - offset,
735 &priv->lock);
736 if (count == 0)
737 return;
738
739 switch (priv->pkt_fmt) {
740 default:
741 case packet_format_1:
742 port->interrupt_out_buffer[1] = count;
743 break;
744 case packet_format_2:
745 port->interrupt_out_buffer[0] |= count;
746 }
747
748 dev_dbg(dev, "%s - count is %d\n", __func__, count);
749
750send:
751 spin_lock_irqsave(&priv->lock, flags);
752 priv->write_urb_in_use = 1;
753 spin_unlock_irqrestore(&priv->lock, flags);
754
755 if (priv->cmd_ctrl)
756 actual_size = 1;
757 else
758 actual_size = count +
759 (priv->pkt_fmt == packet_format_1 ? 2 : 1);
760
761 usb_serial_debug_data(dev, __func__, port->interrupt_out_size,
762 port->interrupt_out_urb->transfer_buffer);
763
764 usb_fill_int_urb(port->interrupt_out_urb, port->serial->dev,
765 usb_sndintpipe(port->serial->dev, port->interrupt_out_endpointAddress),
766 port->interrupt_out_buffer, actual_size,
767 cypress_write_int_callback, port, priv->write_urb_interval);
768 result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
769 if (result) {
770 dev_err_console(port,
771 "%s - failed submitting write urb, error %d\n",
772 __func__, result);
773 priv->write_urb_in_use = 0;
774 cypress_set_dead(port);
775 }
776
777 spin_lock_irqsave(&priv->lock, flags);
778 if (priv->cmd_ctrl)
779 priv->cmd_ctrl = 0;
780
781 /* do not count the line control and size bytes */
782 priv->bytes_out += count;
783 spin_unlock_irqrestore(&priv->lock, flags);
784
785 usb_serial_port_softint(port);
786} /* cypress_send */
787
788
789/* returns how much space is available in the soft buffer */
790static unsigned int cypress_write_room(struct tty_struct *tty)
791{
792 struct usb_serial_port *port = tty->driver_data;
793 struct cypress_private *priv = usb_get_serial_port_data(port);
794 unsigned int room;
795 unsigned long flags;
796
797 spin_lock_irqsave(&priv->lock, flags);
798 room = kfifo_avail(&priv->write_fifo);
799 spin_unlock_irqrestore(&priv->lock, flags);
800
801 dev_dbg(&port->dev, "%s - returns %u\n", __func__, room);
802 return room;
803}
804
805
806static int cypress_tiocmget(struct tty_struct *tty)
807{
808 struct usb_serial_port *port = tty->driver_data;
809 struct cypress_private *priv = usb_get_serial_port_data(port);
810 __u8 status, control;
811 unsigned int result = 0;
812 unsigned long flags;
813
814 spin_lock_irqsave(&priv->lock, flags);
815 control = priv->line_control;
816 status = priv->current_status;
817 spin_unlock_irqrestore(&priv->lock, flags);
818
819 result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0)
820 | ((control & CONTROL_RTS) ? TIOCM_RTS : 0)
821 | ((status & UART_CTS) ? TIOCM_CTS : 0)
822 | ((status & UART_DSR) ? TIOCM_DSR : 0)
823 | ((status & UART_RI) ? TIOCM_RI : 0)
824 | ((status & UART_CD) ? TIOCM_CD : 0);
825
826 dev_dbg(&port->dev, "%s - result = %x\n", __func__, result);
827
828 return result;
829}
830
831
832static int cypress_tiocmset(struct tty_struct *tty,
833 unsigned int set, unsigned int clear)
834{
835 struct usb_serial_port *port = tty->driver_data;
836 struct cypress_private *priv = usb_get_serial_port_data(port);
837 unsigned long flags;
838
839 spin_lock_irqsave(&priv->lock, flags);
840 if (set & TIOCM_RTS)
841 priv->line_control |= CONTROL_RTS;
842 if (set & TIOCM_DTR)
843 priv->line_control |= CONTROL_DTR;
844 if (clear & TIOCM_RTS)
845 priv->line_control &= ~CONTROL_RTS;
846 if (clear & TIOCM_DTR)
847 priv->line_control &= ~CONTROL_DTR;
848 priv->cmd_ctrl = 1;
849 spin_unlock_irqrestore(&priv->lock, flags);
850
851 return cypress_write(tty, port, NULL, 0);
852}
853
854static void cypress_earthmate_init_termios(struct tty_struct *tty)
855{
856 tty_encode_baud_rate(tty, 4800, 4800);
857}
858
859static void cypress_set_termios(struct tty_struct *tty,
860 struct usb_serial_port *port,
861 const struct ktermios *old_termios)
862{
863 struct cypress_private *priv = usb_get_serial_port_data(port);
864 struct device *dev = &port->dev;
865 int data_bits, stop_bits, parity_type, parity_enable;
866 unsigned int cflag;
867 unsigned long flags;
868 __u8 oldlines;
869 int linechange = 0;
870
871 /* Unsupported features need clearing */
872 tty->termios.c_cflag &= ~(CMSPAR|CRTSCTS);
873
874 cflag = tty->termios.c_cflag;
875
876 /* set number of data bits, parity, stop bits */
877 /* when parity is disabled the parity type bit is ignored */
878
879 /* 1 means 2 stop bits, 0 means 1 stop bit */
880 stop_bits = cflag & CSTOPB ? 1 : 0;
881
882 if (cflag & PARENB) {
883 parity_enable = 1;
884 /* 1 means odd parity, 0 means even parity */
885 parity_type = cflag & PARODD ? 1 : 0;
886 } else
887 parity_enable = parity_type = 0;
888
889 data_bits = tty_get_char_size(cflag);
890
891 spin_lock_irqsave(&priv->lock, flags);
892 oldlines = priv->line_control;
893 if ((cflag & CBAUD) == B0) {
894 /* drop dtr and rts */
895 dev_dbg(dev, "%s - dropping the lines, baud rate 0bps\n", __func__);
896 priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
897 } else
898 priv->line_control = (CONTROL_DTR | CONTROL_RTS);
899 spin_unlock_irqrestore(&priv->lock, flags);
900
901 dev_dbg(dev, "%s - sending %d stop_bits, %d parity_enable, %d parity_type, %d data_bits (+5)\n",
902 __func__, stop_bits, parity_enable, parity_type, data_bits);
903
904 cypress_serial_control(tty, port, tty_get_baud_rate(tty),
905 data_bits, stop_bits,
906 parity_enable, parity_type,
907 0, CYPRESS_SET_CONFIG);
908
909 /* we perform a CYPRESS_GET_CONFIG so that the current settings are
910 * filled into the private structure this should confirm that all is
911 * working if it returns what we just set */
912 cypress_serial_control(tty, port, 0, 0, 0, 0, 0, 0, CYPRESS_GET_CONFIG);
913
914 /* Here we can define custom tty settings for devices; the main tty
915 * termios flag base comes from empeg.c */
916
917 spin_lock_irqsave(&priv->lock, flags);
918 if (priv->chiptype == CT_EARTHMATE && priv->baud_rate == 4800) {
919 dev_dbg(dev, "Using custom termios settings for a baud rate of 4800bps.\n");
920 /* define custom termios settings for NMEA protocol */
921
922 tty->termios.c_iflag /* input modes - */
923 &= ~(IGNBRK /* disable ignore break */
924 | BRKINT /* disable break causes interrupt */
925 | PARMRK /* disable mark parity errors */
926 | ISTRIP /* disable clear high bit of input char */
927 | INLCR /* disable translate NL to CR */
928 | IGNCR /* disable ignore CR */
929 | ICRNL /* disable translate CR to NL */
930 | IXON); /* disable enable XON/XOFF flow control */
931
932 tty->termios.c_oflag /* output modes */
933 &= ~OPOST; /* disable postprocess output char */
934
935 tty->termios.c_lflag /* line discipline modes */
936 &= ~(ECHO /* disable echo input characters */
937 | ECHONL /* disable echo new line */
938 | ICANON /* disable erase, kill, werase, and rprnt
939 special characters */
940 | ISIG /* disable interrupt, quit, and suspend
941 special characters */
942 | IEXTEN); /* disable non-POSIX special characters */
943 } /* CT_CYPHIDCOM: Application should handle this for device */
944
945 linechange = (priv->line_control != oldlines);
946 spin_unlock_irqrestore(&priv->lock, flags);
947
948 /* if necessary, set lines */
949 if (linechange) {
950 priv->cmd_ctrl = 1;
951 cypress_write(tty, port, NULL, 0);
952 }
953} /* cypress_set_termios */
954
955
956/* returns amount of data still left in soft buffer */
957static unsigned int cypress_chars_in_buffer(struct tty_struct *tty)
958{
959 struct usb_serial_port *port = tty->driver_data;
960 struct cypress_private *priv = usb_get_serial_port_data(port);
961 unsigned int chars;
962 unsigned long flags;
963
964 spin_lock_irqsave(&priv->lock, flags);
965 chars = kfifo_len(&priv->write_fifo);
966 spin_unlock_irqrestore(&priv->lock, flags);
967
968 dev_dbg(&port->dev, "%s - returns %u\n", __func__, chars);
969 return chars;
970}
971
972
973static void cypress_throttle(struct tty_struct *tty)
974{
975 struct usb_serial_port *port = tty->driver_data;
976 struct cypress_private *priv = usb_get_serial_port_data(port);
977
978 spin_lock_irq(&priv->lock);
979 priv->rx_flags = THROTTLED;
980 spin_unlock_irq(&priv->lock);
981}
982
983
984static void cypress_unthrottle(struct tty_struct *tty)
985{
986 struct usb_serial_port *port = tty->driver_data;
987 struct cypress_private *priv = usb_get_serial_port_data(port);
988 int actually_throttled, result;
989
990 spin_lock_irq(&priv->lock);
991 actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED;
992 priv->rx_flags = 0;
993 spin_unlock_irq(&priv->lock);
994
995 if (!priv->comm_is_ok)
996 return;
997
998 if (actually_throttled) {
999 result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
1000 if (result) {
1001 dev_err(&port->dev, "%s - failed submitting read urb, "
1002 "error %d\n", __func__, result);
1003 cypress_set_dead(port);
1004 }
1005 }
1006}
1007
1008
1009static void cypress_read_int_callback(struct urb *urb)
1010{
1011 struct usb_serial_port *port = urb->context;
1012 struct cypress_private *priv = usb_get_serial_port_data(port);
1013 struct device *dev = &urb->dev->dev;
1014 struct tty_struct *tty;
1015 unsigned char *data = urb->transfer_buffer;
1016 unsigned long flags;
1017 char tty_flag = TTY_NORMAL;
1018 int bytes = 0;
1019 int result;
1020 int i = 0;
1021 int status = urb->status;
1022
1023 switch (status) {
1024 case 0: /* success */
1025 break;
1026 case -ECONNRESET:
1027 case -ENOENT:
1028 case -ESHUTDOWN:
1029 /* precursor to disconnect so just go away */
1030 return;
1031 case -EPIPE:
1032 /* Can't call usb_clear_halt while in_interrupt */
1033 fallthrough;
1034 default:
1035 /* something ugly is going on... */
1036 dev_err(dev, "%s - unexpected nonzero read status received: %d\n",
1037 __func__, status);
1038 cypress_set_dead(port);
1039 return;
1040 }
1041
1042 spin_lock_irqsave(&priv->lock, flags);
1043 if (priv->rx_flags & THROTTLED) {
1044 dev_dbg(dev, "%s - now throttling\n", __func__);
1045 priv->rx_flags |= ACTUALLY_THROTTLED;
1046 spin_unlock_irqrestore(&priv->lock, flags);
1047 return;
1048 }
1049 spin_unlock_irqrestore(&priv->lock, flags);
1050
1051 tty = tty_port_tty_get(&port->port);
1052 if (!tty) {
1053 dev_dbg(dev, "%s - bad tty pointer - exiting\n", __func__);
1054 return;
1055 }
1056
1057 spin_lock_irqsave(&priv->lock, flags);
1058 result = urb->actual_length;
1059 switch (priv->pkt_fmt) {
1060 default:
1061 case packet_format_1:
1062 /* This is for the CY7C64013... */
1063 priv->current_status = data[0] & 0xF8;
1064 bytes = data[1] + 2;
1065 i = 2;
1066 break;
1067 case packet_format_2:
1068 /* This is for the CY7C63743... */
1069 priv->current_status = data[0] & 0xF8;
1070 bytes = (data[0] & 0x07) + 1;
1071 i = 1;
1072 break;
1073 }
1074 spin_unlock_irqrestore(&priv->lock, flags);
1075 if (result < bytes) {
1076 dev_dbg(dev,
1077 "%s - wrong packet size - received %d bytes but packet said %d bytes\n",
1078 __func__, result, bytes);
1079 goto continue_read;
1080 }
1081
1082 usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data);
1083
1084 spin_lock_irqsave(&priv->lock, flags);
1085 /* check to see if status has changed */
1086 if (priv->current_status != priv->prev_status) {
1087 u8 delta = priv->current_status ^ priv->prev_status;
1088
1089 if (delta & UART_MSR_MASK) {
1090 if (delta & UART_CTS)
1091 port->icount.cts++;
1092 if (delta & UART_DSR)
1093 port->icount.dsr++;
1094 if (delta & UART_RI)
1095 port->icount.rng++;
1096 if (delta & UART_CD)
1097 port->icount.dcd++;
1098
1099 wake_up_interruptible(&port->port.delta_msr_wait);
1100 }
1101
1102 priv->prev_status = priv->current_status;
1103 }
1104 spin_unlock_irqrestore(&priv->lock, flags);
1105
1106 /* hangup, as defined in acm.c... this might be a bad place for it
1107 * though */
1108 if (tty && !C_CLOCAL(tty) && !(priv->current_status & UART_CD)) {
1109 dev_dbg(dev, "%s - calling hangup\n", __func__);
1110 tty_hangup(tty);
1111 goto continue_read;
1112 }
1113
1114 /* There is one error bit... I'm assuming it is a parity error
1115 * indicator as the generic firmware will set this bit to 1 if a
1116 * parity error occurs.
1117 * I can not find reference to any other error events. */
1118 spin_lock_irqsave(&priv->lock, flags);
1119 if (priv->current_status & CYP_ERROR) {
1120 spin_unlock_irqrestore(&priv->lock, flags);
1121 tty_flag = TTY_PARITY;
1122 dev_dbg(dev, "%s - Parity Error detected\n", __func__);
1123 } else
1124 spin_unlock_irqrestore(&priv->lock, flags);
1125
1126 /* process read if there is data other than line status */
1127 if (bytes > i) {
1128 tty_insert_flip_string_fixed_flag(&port->port, data + i,
1129 tty_flag, bytes - i);
1130 tty_flip_buffer_push(&port->port);
1131 }
1132
1133 spin_lock_irqsave(&priv->lock, flags);
1134 /* control and status byte(s) are also counted */
1135 priv->bytes_in += bytes;
1136 spin_unlock_irqrestore(&priv->lock, flags);
1137
1138continue_read:
1139 tty_kref_put(tty);
1140
1141 /* Continue trying to always read */
1142
1143 if (priv->comm_is_ok) {
1144 usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev,
1145 usb_rcvintpipe(port->serial->dev,
1146 port->interrupt_in_endpointAddress),
1147 port->interrupt_in_urb->transfer_buffer,
1148 port->interrupt_in_urb->transfer_buffer_length,
1149 cypress_read_int_callback, port,
1150 priv->read_urb_interval);
1151 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
1152 if (result && result != -EPERM) {
1153 dev_err(dev, "%s - failed resubmitting read urb, error %d\n",
1154 __func__, result);
1155 cypress_set_dead(port);
1156 }
1157 }
1158} /* cypress_read_int_callback */
1159
1160
1161static void cypress_write_int_callback(struct urb *urb)
1162{
1163 struct usb_serial_port *port = urb->context;
1164 struct cypress_private *priv = usb_get_serial_port_data(port);
1165 struct device *dev = &urb->dev->dev;
1166 int status = urb->status;
1167
1168 switch (status) {
1169 case 0:
1170 /* success */
1171 break;
1172 case -ECONNRESET:
1173 case -ENOENT:
1174 case -ESHUTDOWN:
1175 /* this urb is terminated, clean up */
1176 dev_dbg(dev, "%s - urb shutting down with status: %d\n",
1177 __func__, status);
1178 priv->write_urb_in_use = 0;
1179 return;
1180 case -EPIPE:
1181 /* Cannot call usb_clear_halt while in_interrupt */
1182 fallthrough;
1183 default:
1184 dev_err(dev, "%s - unexpected nonzero write status received: %d\n",
1185 __func__, status);
1186 cypress_set_dead(port);
1187 break;
1188 }
1189 priv->write_urb_in_use = 0;
1190
1191 /* send any buffered data */
1192 cypress_send(port);
1193}
1194
1195module_usb_serial_driver(serial_drivers, id_table_combined);
1196
1197MODULE_AUTHOR(DRIVER_AUTHOR);
1198MODULE_DESCRIPTION(DRIVER_DESC);
1199MODULE_LICENSE("GPL");
1200
1201module_param(stats, bool, 0644);
1202MODULE_PARM_DESC(stats, "Enable statistics or not");
1203module_param(interval, int, 0644);
1204MODULE_PARM_DESC(interval, "Overrides interrupt interval");
1205module_param(unstable_bauds, bool, 0644);
1206MODULE_PARM_DESC(unstable_bauds, "Allow unstable baud rates");