Linux Audio

Check our new training course

Loading...
v4.6
 
  1/*
  2 * Intersil ISL1208 rtc class driver
  3 *
  4 * Copyright 2005,2006 Hebert Valerio Riedel <hvr@gnu.org>
  5 *
  6 *  This program is free software; you can redistribute  it and/or modify it
  7 *  under  the terms of  the GNU General  Public License as published by the
  8 *  Free Software Foundation;  either version 2 of the  License, or (at your
  9 *  option) any later version.
 10 *
 11 */
 12
 13#include <linux/module.h>
 14#include <linux/i2c.h>
 15#include <linux/bcd.h>
 
 
 
 
 
 
 16#include <linux/rtc.h>
 17
 18#define DRV_VERSION "0.3"
 19
 20/* Register map */
 21/* rtc section */
 22#define ISL1208_REG_SC  0x00
 23#define ISL1208_REG_MN  0x01
 24#define ISL1208_REG_HR  0x02
 25#define ISL1208_REG_HR_MIL     (1<<7)	/* 24h/12h mode */
 26#define ISL1208_REG_HR_PM      (1<<5)	/* PM/AM bit in 12h mode */
 27#define ISL1208_REG_DT  0x03
 28#define ISL1208_REG_MO  0x04
 29#define ISL1208_REG_YR  0x05
 30#define ISL1208_REG_DW  0x06
 31#define ISL1208_RTC_SECTION_LEN 7
 32
 33/* control/status section */
 34#define ISL1208_REG_SR  0x07
 35#define ISL1208_REG_SR_ARST    (1<<7)	/* auto reset */
 36#define ISL1208_REG_SR_XTOSCB  (1<<6)	/* crystal oscillator */
 37#define ISL1208_REG_SR_WRTC    (1<<4)	/* write rtc */
 
 38#define ISL1208_REG_SR_ALM     (1<<2)	/* alarm */
 39#define ISL1208_REG_SR_BAT     (1<<1)	/* battery */
 40#define ISL1208_REG_SR_RTCF    (1<<0)	/* rtc fail */
 41#define ISL1208_REG_INT 0x08
 42#define ISL1208_REG_INT_ALME   (1<<6)   /* alarm enable */
 43#define ISL1208_REG_INT_IM     (1<<7)   /* interrupt/alarm mode */
 44#define ISL1208_REG_09  0x09	/* reserved */
 
 
 45#define ISL1208_REG_ATR 0x0a
 46#define ISL1208_REG_DTR 0x0b
 47
 48/* alarm section */
 49#define ISL1208_REG_SCA 0x0c
 50#define ISL1208_REG_MNA 0x0d
 51#define ISL1208_REG_HRA 0x0e
 52#define ISL1208_REG_DTA 0x0f
 53#define ISL1208_REG_MOA 0x10
 54#define ISL1208_REG_DWA 0x11
 55#define ISL1208_ALARM_SECTION_LEN 6
 56
 57/* user section */
 58#define ISL1208_REG_USR1 0x12
 59#define ISL1208_REG_USR2 0x13
 60#define ISL1208_USR_SECTION_LEN 2
 61
 
 
 
 
 
 
 
 
 
 62static struct i2c_driver isl1208_driver;
 63
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 64/* block read */
 65static int
 66isl1208_i2c_read_regs(struct i2c_client *client, u8 reg, u8 buf[],
 67		      unsigned len)
 68{
 69	u8 reg_addr[1] = { reg };
 70	struct i2c_msg msgs[2] = {
 71		{
 72			.addr = client->addr,
 73			.len = sizeof(reg_addr),
 74			.buf = reg_addr
 75		},
 76		{
 77			.addr = client->addr,
 78			.flags = I2C_M_RD,
 79			.len = len,
 80			.buf = buf
 81		}
 82	};
 83	int ret;
 84
 85	BUG_ON(reg > ISL1208_REG_USR2);
 86	BUG_ON(reg + len > ISL1208_REG_USR2 + 1);
 87
 88	ret = i2c_transfer(client->adapter, msgs, 2);
 89	if (ret > 0)
 90		ret = 0;
 91	return ret;
 92}
 93
 94/* block write */
 95static int
 96isl1208_i2c_set_regs(struct i2c_client *client, u8 reg, u8 const buf[],
 97		     unsigned len)
 98{
 99	u8 i2c_buf[ISL1208_REG_USR2 + 2];
100	struct i2c_msg msgs[1] = {
101		{
102			.addr = client->addr,
103			.len = len + 1,
104			.buf = i2c_buf
105		}
106	};
107	int ret;
108
109	BUG_ON(reg > ISL1208_REG_USR2);
110	BUG_ON(reg + len > ISL1208_REG_USR2 + 1);
111
112	i2c_buf[0] = reg;
113	memcpy(&i2c_buf[1], &buf[0], len);
114
115	ret = i2c_transfer(client->adapter, msgs, 1);
116	if (ret > 0)
117		ret = 0;
118	return ret;
119}
120
121/* simple check to see whether we have a isl1208 */
122static int
123isl1208_i2c_validate_client(struct i2c_client *client)
124{
125	u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
126	u8 zero_mask[ISL1208_RTC_SECTION_LEN] = {
127		0x80, 0x80, 0x40, 0xc0, 0xe0, 0x00, 0xf8
128	};
129	int i;
130	int ret;
131
132	ret = isl1208_i2c_read_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN);
133	if (ret < 0)
134		return ret;
135
136	for (i = 0; i < ISL1208_RTC_SECTION_LEN; ++i) {
137		if (regs[i] & zero_mask[i])	/* check if bits are cleared */
138			return -ENODEV;
139	}
140
141	return 0;
142}
143
 
 
 
 
 
 
 
 
 
 
 
 
 
 
144static int
145isl1208_i2c_get_sr(struct i2c_client *client)
146{
147	return i2c_smbus_read_byte_data(client, ISL1208_REG_SR);
148}
149
150static int
151isl1208_i2c_get_atr(struct i2c_client *client)
152{
153	int atr = i2c_smbus_read_byte_data(client, ISL1208_REG_ATR);
154	if (atr < 0)
155		return atr;
156
157	/* The 6bit value in the ATR register controls the load
158	 * capacitance C_load * in steps of 0.25pF
159	 *
160	 * bit (1<<5) of the ATR register is inverted
161	 *
162	 * C_load(ATR=0x20) =  4.50pF
163	 * C_load(ATR=0x00) = 12.50pF
164	 * C_load(ATR=0x1f) = 20.25pF
165	 *
166	 */
167
168	atr &= 0x3f;		/* mask out lsb */
169	atr ^= 1 << 5;		/* invert 6th bit */
170	atr += 2 * 9;		/* add offset of 4.5pF; unit[atr] = 0.25pF */
171
172	return atr;
173}
174
 
175static int
176isl1208_i2c_get_dtr(struct i2c_client *client)
177{
178	int dtr = i2c_smbus_read_byte_data(client, ISL1208_REG_DTR);
179	if (dtr < 0)
180		return -EIO;
181
182	/* dtr encodes adjustments of {-60,-40,-20,0,20,40,60} ppm */
183	dtr = ((dtr & 0x3) * 20) * (dtr & (1 << 2) ? -1 : 1);
184
185	return dtr;
186}
187
188static int
189isl1208_i2c_get_usr(struct i2c_client *client)
190{
191	u8 buf[ISL1208_USR_SECTION_LEN] = { 0, };
192	int ret;
193
194	ret = isl1208_i2c_read_regs(client, ISL1208_REG_USR1, buf,
195				    ISL1208_USR_SECTION_LEN);
196	if (ret < 0)
197		return ret;
198
199	return (buf[1] << 8) | buf[0];
200}
201
202static int
203isl1208_i2c_set_usr(struct i2c_client *client, u16 usr)
204{
205	u8 buf[ISL1208_USR_SECTION_LEN];
206
207	buf[0] = usr & 0xff;
208	buf[1] = (usr >> 8) & 0xff;
209
210	return isl1208_i2c_set_regs(client, ISL1208_REG_USR1, buf,
211				    ISL1208_USR_SECTION_LEN);
212}
213
214static int
215isl1208_rtc_toggle_alarm(struct i2c_client *client, int enable)
216{
217	int icr = i2c_smbus_read_byte_data(client, ISL1208_REG_INT);
218
219	if (icr < 0) {
220		dev_err(&client->dev, "%s: reading INT failed\n", __func__);
221		return icr;
222	}
223
224	if (enable)
225		icr |= ISL1208_REG_INT_ALME | ISL1208_REG_INT_IM;
226	else
227		icr &= ~(ISL1208_REG_INT_ALME | ISL1208_REG_INT_IM);
228
229	icr = i2c_smbus_write_byte_data(client, ISL1208_REG_INT, icr);
230	if (icr < 0) {
231		dev_err(&client->dev, "%s: writing INT failed\n", __func__);
232		return icr;
233	}
234
235	return 0;
236}
237
238static int
239isl1208_rtc_proc(struct device *dev, struct seq_file *seq)
240{
241	struct i2c_client *const client = to_i2c_client(dev);
242	int sr, dtr, atr, usr;
243
244	sr = isl1208_i2c_get_sr(client);
245	if (sr < 0) {
246		dev_err(&client->dev, "%s: reading SR failed\n", __func__);
247		return sr;
248	}
249
250	seq_printf(seq, "status_reg\t:%s%s%s%s%s%s (0x%.2x)\n",
251		   (sr & ISL1208_REG_SR_RTCF) ? " RTCF" : "",
252		   (sr & ISL1208_REG_SR_BAT) ? " BAT" : "",
253		   (sr & ISL1208_REG_SR_ALM) ? " ALM" : "",
254		   (sr & ISL1208_REG_SR_WRTC) ? " WRTC" : "",
255		   (sr & ISL1208_REG_SR_XTOSCB) ? " XTOSCB" : "",
256		   (sr & ISL1208_REG_SR_ARST) ? " ARST" : "", sr);
257
258	seq_printf(seq, "batt_status\t: %s\n",
259		   (sr & ISL1208_REG_SR_RTCF) ? "bad" : "okay");
260
261	dtr = isl1208_i2c_get_dtr(client);
262	if (dtr >= 0 - 1)
263		seq_printf(seq, "digital_trim\t: %d ppm\n", dtr);
264
265	atr = isl1208_i2c_get_atr(client);
266	if (atr >= 0)
267		seq_printf(seq, "analog_trim\t: %d.%.2d pF\n",
268			   atr >> 2, (atr & 0x3) * 25);
269
270	usr = isl1208_i2c_get_usr(client);
271	if (usr >= 0)
272		seq_printf(seq, "user_data\t: 0x%.4x\n", usr);
273
274	return 0;
275}
276
277static int
278isl1208_i2c_read_time(struct i2c_client *client, struct rtc_time *tm)
279{
280	int sr;
281	u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
282
283	sr = isl1208_i2c_get_sr(client);
284	if (sr < 0) {
285		dev_err(&client->dev, "%s: reading SR failed\n", __func__);
286		return -EIO;
287	}
288
289	sr = isl1208_i2c_read_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN);
290	if (sr < 0) {
291		dev_err(&client->dev, "%s: reading RTC section failed\n",
292			__func__);
293		return sr;
294	}
295
296	tm->tm_sec = bcd2bin(regs[ISL1208_REG_SC]);
297	tm->tm_min = bcd2bin(regs[ISL1208_REG_MN]);
298
299	/* HR field has a more complex interpretation */
300	{
301		const u8 _hr = regs[ISL1208_REG_HR];
302		if (_hr & ISL1208_REG_HR_MIL)	/* 24h format */
303			tm->tm_hour = bcd2bin(_hr & 0x3f);
304		else {
305			/* 12h format */
306			tm->tm_hour = bcd2bin(_hr & 0x1f);
307			if (_hr & ISL1208_REG_HR_PM)	/* PM flag set */
308				tm->tm_hour += 12;
309		}
310	}
311
312	tm->tm_mday = bcd2bin(regs[ISL1208_REG_DT]);
313	tm->tm_mon = bcd2bin(regs[ISL1208_REG_MO]) - 1;	/* rtc starts at 1 */
314	tm->tm_year = bcd2bin(regs[ISL1208_REG_YR]) + 100;
315	tm->tm_wday = bcd2bin(regs[ISL1208_REG_DW]);
316
317	return 0;
318}
319
320static int
321isl1208_i2c_read_alarm(struct i2c_client *client, struct rtc_wkalrm *alarm)
322{
323	struct rtc_time *const tm = &alarm->time;
324	u8 regs[ISL1208_ALARM_SECTION_LEN] = { 0, };
325	int icr, yr, sr = isl1208_i2c_get_sr(client);
326
327	if (sr < 0) {
328		dev_err(&client->dev, "%s: reading SR failed\n", __func__);
329		return sr;
330	}
331
332	sr = isl1208_i2c_read_regs(client, ISL1208_REG_SCA, regs,
333				   ISL1208_ALARM_SECTION_LEN);
334	if (sr < 0) {
335		dev_err(&client->dev, "%s: reading alarm section failed\n",
336			__func__);
337		return sr;
338	}
339
340	/* MSB of each alarm register is an enable bit */
341	tm->tm_sec = bcd2bin(regs[ISL1208_REG_SCA - ISL1208_REG_SCA] & 0x7f);
342	tm->tm_min = bcd2bin(regs[ISL1208_REG_MNA - ISL1208_REG_SCA] & 0x7f);
343	tm->tm_hour = bcd2bin(regs[ISL1208_REG_HRA - ISL1208_REG_SCA] & 0x3f);
344	tm->tm_mday = bcd2bin(regs[ISL1208_REG_DTA - ISL1208_REG_SCA] & 0x3f);
345	tm->tm_mon =
346		bcd2bin(regs[ISL1208_REG_MOA - ISL1208_REG_SCA] & 0x1f) - 1;
347	tm->tm_wday = bcd2bin(regs[ISL1208_REG_DWA - ISL1208_REG_SCA] & 0x03);
348
349	/* The alarm doesn't store the year so get it from the rtc section */
350	yr = i2c_smbus_read_byte_data(client, ISL1208_REG_YR);
351	if (yr < 0) {
352		dev_err(&client->dev, "%s: reading RTC YR failed\n", __func__);
353		return yr;
354	}
355	tm->tm_year = bcd2bin(yr) + 100;
356
357	icr = i2c_smbus_read_byte_data(client, ISL1208_REG_INT);
358	if (icr < 0) {
359		dev_err(&client->dev, "%s: reading INT failed\n", __func__);
360		return icr;
361	}
362	alarm->enabled = !!(icr & ISL1208_REG_INT_ALME);
363
364	return 0;
365}
366
367static int
368isl1208_i2c_set_alarm(struct i2c_client *client, struct rtc_wkalrm *alarm)
369{
370	struct rtc_time *alarm_tm = &alarm->time;
371	u8 regs[ISL1208_ALARM_SECTION_LEN] = { 0, };
372	const int offs = ISL1208_REG_SCA;
373	struct rtc_time rtc_tm;
374	int err, enable;
375
376	err = isl1208_i2c_read_time(client, &rtc_tm);
377	if (err)
378		return err;
379
380	/* If the alarm time is before the current time disable the alarm */
381	if (!alarm->enabled || rtc_tm_sub(alarm_tm, &rtc_tm) <= 0)
382		enable = 0x00;
383	else
384		enable = 0x80;
385
386	/* Program the alarm and enable it for each setting */
387	regs[ISL1208_REG_SCA - offs] = bin2bcd(alarm_tm->tm_sec) | enable;
388	regs[ISL1208_REG_MNA - offs] = bin2bcd(alarm_tm->tm_min) | enable;
389	regs[ISL1208_REG_HRA - offs] = bin2bcd(alarm_tm->tm_hour) |
390		ISL1208_REG_HR_MIL | enable;
391
392	regs[ISL1208_REG_DTA - offs] = bin2bcd(alarm_tm->tm_mday) | enable;
393	regs[ISL1208_REG_MOA - offs] = bin2bcd(alarm_tm->tm_mon + 1) | enable;
394	regs[ISL1208_REG_DWA - offs] = bin2bcd(alarm_tm->tm_wday & 7) | enable;
395
396	/* write ALARM registers */
397	err = isl1208_i2c_set_regs(client, offs, regs,
398				  ISL1208_ALARM_SECTION_LEN);
399	if (err < 0) {
400		dev_err(&client->dev, "%s: writing ALARM section failed\n",
401			__func__);
402		return err;
403	}
404
405	err = isl1208_rtc_toggle_alarm(client, enable);
406	if (err)
407		return err;
408
409	return 0;
410}
411
412static int
413isl1208_rtc_read_time(struct device *dev, struct rtc_time *tm)
414{
415	return isl1208_i2c_read_time(to_i2c_client(dev), tm);
416}
417
418static int
419isl1208_i2c_set_time(struct i2c_client *client, struct rtc_time const *tm)
420{
421	int sr;
422	u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
423
424	/* The clock has an 8 bit wide bcd-coded register (they never learn)
425	 * for the year. tm_year is an offset from 1900 and we are interested
426	 * in the 2000-2099 range, so any value less than 100 is invalid.
427	 */
428	if (tm->tm_year < 100)
429		return -EINVAL;
430
431	regs[ISL1208_REG_SC] = bin2bcd(tm->tm_sec);
432	regs[ISL1208_REG_MN] = bin2bcd(tm->tm_min);
433	regs[ISL1208_REG_HR] = bin2bcd(tm->tm_hour) | ISL1208_REG_HR_MIL;
434
435	regs[ISL1208_REG_DT] = bin2bcd(tm->tm_mday);
436	regs[ISL1208_REG_MO] = bin2bcd(tm->tm_mon + 1);
437	regs[ISL1208_REG_YR] = bin2bcd(tm->tm_year - 100);
438
439	regs[ISL1208_REG_DW] = bin2bcd(tm->tm_wday & 7);
440
441	sr = isl1208_i2c_get_sr(client);
442	if (sr < 0) {
443		dev_err(&client->dev, "%s: reading SR failed\n", __func__);
444		return sr;
445	}
446
447	/* set WRTC */
448	sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR,
449				       sr | ISL1208_REG_SR_WRTC);
450	if (sr < 0) {
451		dev_err(&client->dev, "%s: writing SR failed\n", __func__);
452		return sr;
453	}
454
455	/* write RTC registers */
456	sr = isl1208_i2c_set_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN);
457	if (sr < 0) {
458		dev_err(&client->dev, "%s: writing RTC section failed\n",
459			__func__);
460		return sr;
461	}
462
463	/* clear WRTC again */
 
 
 
 
 
464	sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR,
465				       sr & ~ISL1208_REG_SR_WRTC);
466	if (sr < 0) {
467		dev_err(&client->dev, "%s: writing SR failed\n", __func__);
468		return sr;
469	}
470
471	return 0;
472}
473
474
475static int
476isl1208_rtc_set_time(struct device *dev, struct rtc_time *tm)
477{
478	return isl1208_i2c_set_time(to_i2c_client(dev), tm);
479}
480
481static int
482isl1208_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
483{
484	return isl1208_i2c_read_alarm(to_i2c_client(dev), alarm);
485}
486
487static int
488isl1208_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
489{
490	return isl1208_i2c_set_alarm(to_i2c_client(dev), alarm);
491}
492
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
493static irqreturn_t
494isl1208_rtc_interrupt(int irq, void *data)
495{
496	unsigned long timeout = jiffies + msecs_to_jiffies(1000);
497	struct i2c_client *client = data;
498	struct rtc_device *rtc = i2c_get_clientdata(client);
499	int handled = 0, sr, err;
500
 
 
 
 
 
 
 
 
 
 
 
 
501	/*
502	 * I2C reads get NAK'ed if we read straight away after an interrupt?
503	 * Using a mdelay/msleep didn't seem to help either, so we work around
504	 * this by continually trying to read the register for a short time.
505	 */
506	while (1) {
507		sr = isl1208_i2c_get_sr(client);
508		if (sr >= 0)
509			break;
510
511		if (time_after(jiffies, timeout)) {
512			dev_err(&client->dev, "%s: reading SR failed\n",
513				__func__);
514			return sr;
515		}
516	}
517
518	if (sr & ISL1208_REG_SR_ALM) {
519		dev_dbg(&client->dev, "alarm!\n");
520
521		rtc_update_irq(rtc, 1, RTC_IRQF | RTC_AF);
 
 
 
 
 
 
 
522
523		/* Clear the alarm */
524		sr &= ~ISL1208_REG_SR_ALM;
525		sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR, sr);
526		if (sr < 0)
527			dev_err(&client->dev, "%s: writing SR failed\n",
528				__func__);
529		else
530			handled = 1;
 
531
532		/* Disable the alarm */
533		err = isl1208_rtc_toggle_alarm(client, 0);
534		if (err)
535			return err;
 
 
536	}
537
538	return handled ? IRQ_HANDLED : IRQ_NONE;
539}
540
541static const struct rtc_class_ops isl1208_rtc_ops = {
542	.proc = isl1208_rtc_proc,
543	.read_time = isl1208_rtc_read_time,
544	.set_time = isl1208_rtc_set_time,
545	.read_alarm = isl1208_rtc_read_alarm,
546	.set_alarm = isl1208_rtc_set_alarm,
547};
548
549/* sysfs interface */
550
551static ssize_t
552isl1208_sysfs_show_atrim(struct device *dev,
553			 struct device_attribute *attr, char *buf)
554{
555	int atr = isl1208_i2c_get_atr(to_i2c_client(dev));
556	if (atr < 0)
557		return atr;
558
559	return sprintf(buf, "%d.%.2d pF\n", atr >> 2, (atr & 0x3) * 25);
560}
561
562static DEVICE_ATTR(atrim, S_IRUGO, isl1208_sysfs_show_atrim, NULL);
563
564static ssize_t
565isl1208_sysfs_show_dtrim(struct device *dev,
566			 struct device_attribute *attr, char *buf)
567{
568	int dtr = isl1208_i2c_get_dtr(to_i2c_client(dev));
569	if (dtr < 0)
570		return dtr;
571
572	return sprintf(buf, "%d ppm\n", dtr);
573}
574
575static DEVICE_ATTR(dtrim, S_IRUGO, isl1208_sysfs_show_dtrim, NULL);
576
577static ssize_t
578isl1208_sysfs_show_usr(struct device *dev,
579		       struct device_attribute *attr, char *buf)
580{
581	int usr = isl1208_i2c_get_usr(to_i2c_client(dev));
582	if (usr < 0)
583		return usr;
584
585	return sprintf(buf, "0x%.4x\n", usr);
586}
587
588static ssize_t
589isl1208_sysfs_store_usr(struct device *dev,
590			struct device_attribute *attr,
591			const char *buf, size_t count)
592{
593	int usr = -1;
594
595	if (buf[0] == '0' && (buf[1] == 'x' || buf[1] == 'X')) {
596		if (sscanf(buf, "%x", &usr) != 1)
597			return -EINVAL;
598	} else {
599		if (sscanf(buf, "%d", &usr) != 1)
600			return -EINVAL;
601	}
602
603	if (usr < 0 || usr > 0xffff)
604		return -EINVAL;
605
606	return isl1208_i2c_set_usr(to_i2c_client(dev), usr) ? -EIO : count;
 
 
 
607}
608
609static DEVICE_ATTR(usr, S_IRUGO | S_IWUSR, isl1208_sysfs_show_usr,
610		   isl1208_sysfs_store_usr);
611
612static struct attribute *isl1208_rtc_attrs[] = {
613	&dev_attr_atrim.attr,
614	&dev_attr_dtrim.attr,
615	&dev_attr_usr.attr,
616	NULL
617};
618
619static const struct attribute_group isl1208_rtc_sysfs_files = {
620	.attrs	= isl1208_rtc_attrs,
621};
622
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
623static int
624isl1208_probe(struct i2c_client *client, const struct i2c_device_id *id)
625{
 
 
 
626	int rc = 0;
627	struct rtc_device *rtc;
628
629	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
630		return -ENODEV;
631
632	if (isl1208_i2c_validate_client(client) < 0)
633		return -ENODEV;
634
635	dev_info(&client->dev,
636		 "chip found, driver version " DRV_VERSION "\n");
 
 
 
 
 
 
 
 
637
638	if (client->irq > 0) {
639		rc = devm_request_threaded_irq(&client->dev, client->irq, NULL,
640					       isl1208_rtc_interrupt,
641					       IRQF_SHARED | IRQF_ONESHOT,
642					       isl1208_driver.driver.name,
643					       client);
644		if (!rc) {
645			device_init_wakeup(&client->dev, 1);
646			enable_irq_wake(client->irq);
647		} else {
648			dev_err(&client->dev,
649				"Unable to request irq %d, no alarm support\n",
650				client->irq);
651			client->irq = 0;
652		}
653	}
654
655	rtc = devm_rtc_device_register(&client->dev, isl1208_driver.driver.name,
656				  &isl1208_rtc_ops,
657				  THIS_MODULE);
658	if (IS_ERR(rtc))
659		return PTR_ERR(rtc);
660
661	i2c_set_clientdata(client, rtc);
 
 
 
662
663	rc = isl1208_i2c_get_sr(client);
664	if (rc < 0) {
665		dev_err(&client->dev, "reading status failed\n");
666		return rc;
667	}
668
669	if (rc & ISL1208_REG_SR_RTCF)
 
 
 
 
 
 
 
670		dev_warn(&client->dev, "rtc power failure detected, "
671			 "please set clock.\n");
672
673	rc = sysfs_create_group(&client->dev.kobj, &isl1208_rtc_sysfs_files);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
674	if (rc)
675		return rc;
676
677	return 0;
678}
 
 
 
 
 
679
680static int
681isl1208_remove(struct i2c_client *client)
682{
683	sysfs_remove_group(&client->dev.kobj, &isl1208_rtc_sysfs_files);
684
685	return 0;
686}
 
687
688static const struct i2c_device_id isl1208_id[] = {
689	{ "isl1208", 0 },
690	{ "isl1218", 0 },
691	{ }
692};
693MODULE_DEVICE_TABLE(i2c, isl1208_id);
694
695static struct i2c_driver isl1208_driver = {
696	.driver = {
697		   .name = "rtc-isl1208",
698		   },
 
699	.probe = isl1208_probe,
700	.remove = isl1208_remove,
701	.id_table = isl1208_id,
702};
703
704module_i2c_driver(isl1208_driver);
705
706MODULE_AUTHOR("Herbert Valerio Riedel <hvr@gnu.org>");
707MODULE_DESCRIPTION("Intersil ISL1208 RTC driver");
708MODULE_LICENSE("GPL");
709MODULE_VERSION(DRV_VERSION);
v6.13.7
  1// SPDX-License-Identifier: GPL-2.0-or-later
  2/*
  3 * Intersil ISL1208 rtc class driver
  4 *
  5 * Copyright 2005,2006 Hebert Valerio Riedel <hvr@gnu.org>
 
 
 
 
 
 
  6 */
  7
 
 
  8#include <linux/bcd.h>
  9#include <linux/clk.h>
 10#include <linux/delay.h>
 11#include <linux/i2c.h>
 12#include <linux/module.h>
 13#include <linux/of.h>
 14#include <linux/of_irq.h>
 15#include <linux/rtc.h>
 16
 
 
 17/* Register map */
 18/* rtc section */
 19#define ISL1208_REG_SC  0x00
 20#define ISL1208_REG_MN  0x01
 21#define ISL1208_REG_HR  0x02
 22#define ISL1208_REG_HR_MIL     (1<<7)	/* 24h/12h mode */
 23#define ISL1208_REG_HR_PM      (1<<5)	/* PM/AM bit in 12h mode */
 24#define ISL1208_REG_DT  0x03
 25#define ISL1208_REG_MO  0x04
 26#define ISL1208_REG_YR  0x05
 27#define ISL1208_REG_DW  0x06
 28#define ISL1208_RTC_SECTION_LEN 7
 29
 30/* control/status section */
 31#define ISL1208_REG_SR  0x07
 32#define ISL1208_REG_SR_ARST    (1<<7)	/* auto reset */
 33#define ISL1208_REG_SR_XTOSCB  (1<<6)	/* crystal oscillator */
 34#define ISL1208_REG_SR_WRTC    (1<<4)	/* write rtc */
 35#define ISL1208_REG_SR_EVT     (1<<3)	/* event */
 36#define ISL1208_REG_SR_ALM     (1<<2)	/* alarm */
 37#define ISL1208_REG_SR_BAT     (1<<1)	/* battery */
 38#define ISL1208_REG_SR_RTCF    (1<<0)	/* rtc fail */
 39#define ISL1208_REG_INT 0x08
 40#define ISL1208_REG_INT_ALME   (1<<6)   /* alarm enable */
 41#define ISL1208_REG_INT_IM     (1<<7)   /* interrupt/alarm mode */
 42#define ISL1219_REG_EV  0x09
 43#define ISL1219_REG_EV_EVEN    (1<<4)   /* event detection enable */
 44#define ISL1219_REG_EV_EVIENB  (1<<7)   /* event in pull-up disable */
 45#define ISL1208_REG_ATR 0x0a
 46#define ISL1208_REG_DTR 0x0b
 47
 48/* alarm section */
 49#define ISL1208_REG_SCA 0x0c
 50#define ISL1208_REG_MNA 0x0d
 51#define ISL1208_REG_HRA 0x0e
 52#define ISL1208_REG_DTA 0x0f
 53#define ISL1208_REG_MOA 0x10
 54#define ISL1208_REG_DWA 0x11
 55#define ISL1208_ALARM_SECTION_LEN 6
 56
 57/* user section */
 58#define ISL1208_REG_USR1 0x12
 59#define ISL1208_REG_USR2 0x13
 60#define ISL1208_USR_SECTION_LEN 2
 61
 62/* event section */
 63#define ISL1219_REG_SCT 0x14
 64#define ISL1219_REG_MNT 0x15
 65#define ISL1219_REG_HRT 0x16
 66#define ISL1219_REG_DTT 0x17
 67#define ISL1219_REG_MOT 0x18
 68#define ISL1219_REG_YRT 0x19
 69#define ISL1219_EVT_SECTION_LEN 6
 70
 71static struct i2c_driver isl1208_driver;
 72
 73/* Chip capabilities table */
 74struct isl1208_config {
 75	unsigned int	nvmem_length;
 76	unsigned	has_tamper:1;
 77	unsigned	has_timestamp:1;
 78	unsigned	has_inverted_osc_bit:1;
 79};
 80
 81static const struct isl1208_config config_isl1208 = {
 82	.nvmem_length = 2,
 83	.has_tamper = false,
 84	.has_timestamp = false
 85};
 86
 87static const struct isl1208_config config_isl1209 = {
 88	.nvmem_length = 2,
 89	.has_tamper = true,
 90	.has_timestamp = false
 91};
 92
 93static const struct isl1208_config config_isl1218 = {
 94	.nvmem_length = 8,
 95	.has_tamper = false,
 96	.has_timestamp = false
 97};
 98
 99static const struct isl1208_config config_isl1219 = {
100	.nvmem_length = 2,
101	.has_tamper = true,
102	.has_timestamp = true
103};
104
105static const struct isl1208_config config_raa215300_a0 = {
106	.nvmem_length = 2,
107	.has_tamper = false,
108	.has_timestamp = false,
109	.has_inverted_osc_bit = true
110};
111
112static const struct i2c_device_id isl1208_id[] = {
113	{ "isl1208", .driver_data = (kernel_ulong_t)&config_isl1208 },
114	{ "isl1209", .driver_data = (kernel_ulong_t)&config_isl1209 },
115	{ "isl1218", .driver_data = (kernel_ulong_t)&config_isl1218 },
116	{ "isl1219", .driver_data = (kernel_ulong_t)&config_isl1219 },
117	{ "raa215300_a0", .driver_data = (kernel_ulong_t)&config_raa215300_a0 },
118	{ }
119};
120MODULE_DEVICE_TABLE(i2c, isl1208_id);
121
122static const __maybe_unused struct of_device_id isl1208_of_match[] = {
123	{ .compatible = "isil,isl1208", .data = &config_isl1208 },
124	{ .compatible = "isil,isl1209", .data = &config_isl1209 },
125	{ .compatible = "isil,isl1218", .data = &config_isl1218 },
126	{ .compatible = "isil,isl1219", .data = &config_isl1219 },
127	{ }
128};
129MODULE_DEVICE_TABLE(of, isl1208_of_match);
130
131/* Device state */
132struct isl1208_state {
133	struct nvmem_config nvmem_config;
134	struct rtc_device *rtc;
135	const struct isl1208_config *config;
136};
137
138/* block read */
139static int
140isl1208_i2c_read_regs(struct i2c_client *client, u8 reg, u8 buf[],
141		      unsigned len)
142{
 
 
 
 
 
 
 
 
 
 
 
 
 
 
143	int ret;
144
145	WARN_ON(reg > ISL1219_REG_YRT);
146	WARN_ON(reg + len > ISL1219_REG_YRT + 1);
147
148	ret = i2c_smbus_read_i2c_block_data(client, reg, len, buf);
149	return (ret < 0) ? ret : 0;
 
 
150}
151
152/* block write */
153static int
154isl1208_i2c_set_regs(struct i2c_client *client, u8 reg, u8 const buf[],
155		     unsigned len)
156{
 
 
 
 
 
 
 
 
157	int ret;
158
159	WARN_ON(reg > ISL1219_REG_YRT);
160	WARN_ON(reg + len > ISL1219_REG_YRT + 1);
161
162	ret = i2c_smbus_write_i2c_block_data(client, reg, len, buf);
163	return (ret < 0) ? ret : 0;
 
 
 
 
 
164}
165
166/* simple check to see whether we have a isl1208 */
167static int
168isl1208_i2c_validate_client(struct i2c_client *client)
169{
170	u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
171	u8 zero_mask[ISL1208_RTC_SECTION_LEN] = {
172		0x80, 0x80, 0x40, 0xc0, 0xe0, 0x00, 0xf8
173	};
174	int i;
175	int ret;
176
177	ret = isl1208_i2c_read_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN);
178	if (ret < 0)
179		return ret;
180
181	for (i = 0; i < ISL1208_RTC_SECTION_LEN; ++i) {
182		if (regs[i] & zero_mask[i])	/* check if bits are cleared */
183			return -ENODEV;
184	}
185
186	return 0;
187}
188
189static int isl1208_set_xtoscb(struct i2c_client *client, int sr, int xtosb_val)
190{
191	/* Do nothing if bit is already set to desired value */
192	if (!!(sr & ISL1208_REG_SR_XTOSCB) == xtosb_val)
193		return 0;
194
195	if (xtosb_val)
196		sr |= ISL1208_REG_SR_XTOSCB;
197	else
198		sr &= ~ISL1208_REG_SR_XTOSCB;
199
200	return i2c_smbus_write_byte_data(client, ISL1208_REG_SR, sr);
201}
202
203static int
204isl1208_i2c_get_sr(struct i2c_client *client)
205{
206	return i2c_smbus_read_byte_data(client, ISL1208_REG_SR);
207}
208
209static int
210isl1208_i2c_get_atr(struct i2c_client *client)
211{
212	int atr = i2c_smbus_read_byte_data(client, ISL1208_REG_ATR);
213	if (atr < 0)
214		return atr;
215
216	/* The 6bit value in the ATR register controls the load
217	 * capacitance C_load * in steps of 0.25pF
218	 *
219	 * bit (1<<5) of the ATR register is inverted
220	 *
221	 * C_load(ATR=0x20) =  4.50pF
222	 * C_load(ATR=0x00) = 12.50pF
223	 * C_load(ATR=0x1f) = 20.25pF
224	 *
225	 */
226
227	atr &= 0x3f;		/* mask out lsb */
228	atr ^= 1 << 5;		/* invert 6th bit */
229	atr += 2 * 9;		/* add offset of 4.5pF; unit[atr] = 0.25pF */
230
231	return atr;
232}
233
234/* returns adjustment value + 100 */
235static int
236isl1208_i2c_get_dtr(struct i2c_client *client)
237{
238	int dtr = i2c_smbus_read_byte_data(client, ISL1208_REG_DTR);
239	if (dtr < 0)
240		return -EIO;
241
242	/* dtr encodes adjustments of {-60,-40,-20,0,20,40,60} ppm */
243	dtr = ((dtr & 0x3) * 20) * (dtr & (1 << 2) ? -1 : 1);
244
245	return dtr + 100;
246}
247
248static int
249isl1208_i2c_get_usr(struct i2c_client *client)
250{
251	u8 buf[ISL1208_USR_SECTION_LEN] = { 0, };
252	int ret;
253
254	ret = isl1208_i2c_read_regs(client, ISL1208_REG_USR1, buf,
255				    ISL1208_USR_SECTION_LEN);
256	if (ret < 0)
257		return ret;
258
259	return (buf[1] << 8) | buf[0];
260}
261
262static int
263isl1208_i2c_set_usr(struct i2c_client *client, u16 usr)
264{
265	u8 buf[ISL1208_USR_SECTION_LEN];
266
267	buf[0] = usr & 0xff;
268	buf[1] = (usr >> 8) & 0xff;
269
270	return isl1208_i2c_set_regs(client, ISL1208_REG_USR1, buf,
271				    ISL1208_USR_SECTION_LEN);
272}
273
274static int
275isl1208_rtc_toggle_alarm(struct i2c_client *client, int enable)
276{
277	int icr = i2c_smbus_read_byte_data(client, ISL1208_REG_INT);
278
279	if (icr < 0) {
280		dev_err(&client->dev, "%s: reading INT failed\n", __func__);
281		return icr;
282	}
283
284	if (enable)
285		icr |= ISL1208_REG_INT_ALME | ISL1208_REG_INT_IM;
286	else
287		icr &= ~(ISL1208_REG_INT_ALME | ISL1208_REG_INT_IM);
288
289	icr = i2c_smbus_write_byte_data(client, ISL1208_REG_INT, icr);
290	if (icr < 0) {
291		dev_err(&client->dev, "%s: writing INT failed\n", __func__);
292		return icr;
293	}
294
295	return 0;
296}
297
298static int
299isl1208_rtc_proc(struct device *dev, struct seq_file *seq)
300{
301	struct i2c_client *const client = to_i2c_client(dev);
302	int sr, dtr, atr, usr;
303
304	sr = isl1208_i2c_get_sr(client);
305	if (sr < 0) {
306		dev_err(&client->dev, "%s: reading SR failed\n", __func__);
307		return sr;
308	}
309
310	seq_printf(seq, "status_reg\t:%s%s%s%s%s%s (0x%.2x)\n",
311		   (sr & ISL1208_REG_SR_RTCF) ? " RTCF" : "",
312		   (sr & ISL1208_REG_SR_BAT) ? " BAT" : "",
313		   (sr & ISL1208_REG_SR_ALM) ? " ALM" : "",
314		   (sr & ISL1208_REG_SR_WRTC) ? " WRTC" : "",
315		   (sr & ISL1208_REG_SR_XTOSCB) ? " XTOSCB" : "",
316		   (sr & ISL1208_REG_SR_ARST) ? " ARST" : "", sr);
317
318	seq_printf(seq, "batt_status\t: %s\n",
319		   (sr & ISL1208_REG_SR_RTCF) ? "bad" : "okay");
320
321	dtr = isl1208_i2c_get_dtr(client);
322	if (dtr >= 0)
323		seq_printf(seq, "digital_trim\t: %d ppm\n", dtr - 100);
324
325	atr = isl1208_i2c_get_atr(client);
326	if (atr >= 0)
327		seq_printf(seq, "analog_trim\t: %d.%.2d pF\n",
328			   atr >> 2, (atr & 0x3) * 25);
329
330	usr = isl1208_i2c_get_usr(client);
331	if (usr >= 0)
332		seq_printf(seq, "user_data\t: 0x%.4x\n", usr);
333
334	return 0;
335}
336
337static int
338isl1208_i2c_read_time(struct i2c_client *client, struct rtc_time *tm)
339{
340	int sr;
341	u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
342
343	sr = isl1208_i2c_get_sr(client);
344	if (sr < 0) {
345		dev_err(&client->dev, "%s: reading SR failed\n", __func__);
346		return -EIO;
347	}
348
349	sr = isl1208_i2c_read_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN);
350	if (sr < 0) {
351		dev_err(&client->dev, "%s: reading RTC section failed\n",
352			__func__);
353		return sr;
354	}
355
356	tm->tm_sec = bcd2bin(regs[ISL1208_REG_SC]);
357	tm->tm_min = bcd2bin(regs[ISL1208_REG_MN]);
358
359	/* HR field has a more complex interpretation */
360	{
361		const u8 _hr = regs[ISL1208_REG_HR];
362		if (_hr & ISL1208_REG_HR_MIL)	/* 24h format */
363			tm->tm_hour = bcd2bin(_hr & 0x3f);
364		else {
365			/* 12h format */
366			tm->tm_hour = bcd2bin(_hr & 0x1f);
367			if (_hr & ISL1208_REG_HR_PM)	/* PM flag set */
368				tm->tm_hour += 12;
369		}
370	}
371
372	tm->tm_mday = bcd2bin(regs[ISL1208_REG_DT]);
373	tm->tm_mon = bcd2bin(regs[ISL1208_REG_MO]) - 1;	/* rtc starts at 1 */
374	tm->tm_year = bcd2bin(regs[ISL1208_REG_YR]) + 100;
375	tm->tm_wday = bcd2bin(regs[ISL1208_REG_DW]);
376
377	return 0;
378}
379
380static int
381isl1208_i2c_read_alarm(struct i2c_client *client, struct rtc_wkalrm *alarm)
382{
383	struct rtc_time *const tm = &alarm->time;
384	u8 regs[ISL1208_ALARM_SECTION_LEN] = { 0, };
385	int icr, yr, sr = isl1208_i2c_get_sr(client);
386
387	if (sr < 0) {
388		dev_err(&client->dev, "%s: reading SR failed\n", __func__);
389		return sr;
390	}
391
392	sr = isl1208_i2c_read_regs(client, ISL1208_REG_SCA, regs,
393				   ISL1208_ALARM_SECTION_LEN);
394	if (sr < 0) {
395		dev_err(&client->dev, "%s: reading alarm section failed\n",
396			__func__);
397		return sr;
398	}
399
400	/* MSB of each alarm register is an enable bit */
401	tm->tm_sec = bcd2bin(regs[ISL1208_REG_SCA - ISL1208_REG_SCA] & 0x7f);
402	tm->tm_min = bcd2bin(regs[ISL1208_REG_MNA - ISL1208_REG_SCA] & 0x7f);
403	tm->tm_hour = bcd2bin(regs[ISL1208_REG_HRA - ISL1208_REG_SCA] & 0x3f);
404	tm->tm_mday = bcd2bin(regs[ISL1208_REG_DTA - ISL1208_REG_SCA] & 0x3f);
405	tm->tm_mon =
406		bcd2bin(regs[ISL1208_REG_MOA - ISL1208_REG_SCA] & 0x1f) - 1;
407	tm->tm_wday = bcd2bin(regs[ISL1208_REG_DWA - ISL1208_REG_SCA] & 0x03);
408
409	/* The alarm doesn't store the year so get it from the rtc section */
410	yr = i2c_smbus_read_byte_data(client, ISL1208_REG_YR);
411	if (yr < 0) {
412		dev_err(&client->dev, "%s: reading RTC YR failed\n", __func__);
413		return yr;
414	}
415	tm->tm_year = bcd2bin(yr) + 100;
416
417	icr = i2c_smbus_read_byte_data(client, ISL1208_REG_INT);
418	if (icr < 0) {
419		dev_err(&client->dev, "%s: reading INT failed\n", __func__);
420		return icr;
421	}
422	alarm->enabled = !!(icr & ISL1208_REG_INT_ALME);
423
424	return 0;
425}
426
427static int
428isl1208_i2c_set_alarm(struct i2c_client *client, struct rtc_wkalrm *alarm)
429{
430	struct rtc_time *alarm_tm = &alarm->time;
431	u8 regs[ISL1208_ALARM_SECTION_LEN] = { 0, };
432	const int offs = ISL1208_REG_SCA;
433	struct rtc_time rtc_tm;
434	int err, enable;
435
436	err = isl1208_i2c_read_time(client, &rtc_tm);
437	if (err)
438		return err;
439
440	/* If the alarm time is before the current time disable the alarm */
441	if (!alarm->enabled || rtc_tm_sub(alarm_tm, &rtc_tm) <= 0)
442		enable = 0x00;
443	else
444		enable = 0x80;
445
446	/* Program the alarm and enable it for each setting */
447	regs[ISL1208_REG_SCA - offs] = bin2bcd(alarm_tm->tm_sec) | enable;
448	regs[ISL1208_REG_MNA - offs] = bin2bcd(alarm_tm->tm_min) | enable;
449	regs[ISL1208_REG_HRA - offs] = bin2bcd(alarm_tm->tm_hour) |
450		ISL1208_REG_HR_MIL | enable;
451
452	regs[ISL1208_REG_DTA - offs] = bin2bcd(alarm_tm->tm_mday) | enable;
453	regs[ISL1208_REG_MOA - offs] = bin2bcd(alarm_tm->tm_mon + 1) | enable;
454	regs[ISL1208_REG_DWA - offs] = bin2bcd(alarm_tm->tm_wday & 7) | enable;
455
456	/* write ALARM registers */
457	err = isl1208_i2c_set_regs(client, offs, regs,
458				  ISL1208_ALARM_SECTION_LEN);
459	if (err < 0) {
460		dev_err(&client->dev, "%s: writing ALARM section failed\n",
461			__func__);
462		return err;
463	}
464
465	err = isl1208_rtc_toggle_alarm(client, enable);
466	if (err)
467		return err;
468
469	return 0;
470}
471
472static int
473isl1208_rtc_read_time(struct device *dev, struct rtc_time *tm)
474{
475	return isl1208_i2c_read_time(to_i2c_client(dev), tm);
476}
477
478static int
479isl1208_i2c_set_time(struct i2c_client *client, struct rtc_time const *tm)
480{
481	int sr;
482	u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
483
484	/* The clock has an 8 bit wide bcd-coded register (they never learn)
485	 * for the year. tm_year is an offset from 1900 and we are interested
486	 * in the 2000-2099 range, so any value less than 100 is invalid.
487	 */
488	if (tm->tm_year < 100)
489		return -EINVAL;
490
491	regs[ISL1208_REG_SC] = bin2bcd(tm->tm_sec);
492	regs[ISL1208_REG_MN] = bin2bcd(tm->tm_min);
493	regs[ISL1208_REG_HR] = bin2bcd(tm->tm_hour) | ISL1208_REG_HR_MIL;
494
495	regs[ISL1208_REG_DT] = bin2bcd(tm->tm_mday);
496	regs[ISL1208_REG_MO] = bin2bcd(tm->tm_mon + 1);
497	regs[ISL1208_REG_YR] = bin2bcd(tm->tm_year - 100);
498
499	regs[ISL1208_REG_DW] = bin2bcd(tm->tm_wday & 7);
500
501	sr = isl1208_i2c_get_sr(client);
502	if (sr < 0) {
503		dev_err(&client->dev, "%s: reading SR failed\n", __func__);
504		return sr;
505	}
506
507	/* set WRTC */
508	sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR,
509				       sr | ISL1208_REG_SR_WRTC);
510	if (sr < 0) {
511		dev_err(&client->dev, "%s: writing SR failed\n", __func__);
512		return sr;
513	}
514
515	/* write RTC registers */
516	sr = isl1208_i2c_set_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN);
517	if (sr < 0) {
518		dev_err(&client->dev, "%s: writing RTC section failed\n",
519			__func__);
520		return sr;
521	}
522
523	/* clear WRTC again */
524	sr = isl1208_i2c_get_sr(client);
525	if (sr < 0) {
526		dev_err(&client->dev, "%s: reading SR failed\n", __func__);
527		return sr;
528	}
529	sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR,
530				       sr & ~ISL1208_REG_SR_WRTC);
531	if (sr < 0) {
532		dev_err(&client->dev, "%s: writing SR failed\n", __func__);
533		return sr;
534	}
535
536	return 0;
537}
538
 
539static int
540isl1208_rtc_set_time(struct device *dev, struct rtc_time *tm)
541{
542	return isl1208_i2c_set_time(to_i2c_client(dev), tm);
543}
544
545static int
546isl1208_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
547{
548	return isl1208_i2c_read_alarm(to_i2c_client(dev), alarm);
549}
550
551static int
552isl1208_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
553{
554	return isl1208_i2c_set_alarm(to_i2c_client(dev), alarm);
555}
556
557static ssize_t timestamp0_store(struct device *dev,
558				struct device_attribute *attr,
559				const char *buf, size_t count)
560{
561	struct i2c_client *client = to_i2c_client(dev->parent);
562	int sr;
563
564	sr = isl1208_i2c_get_sr(client);
565	if (sr < 0) {
566		dev_err(dev, "%s: reading SR failed\n", __func__);
567		return sr;
568	}
569
570	sr &= ~ISL1208_REG_SR_EVT;
571
572	sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR, sr);
573	if (sr < 0)
574		dev_err(dev, "%s: writing SR failed\n",
575			__func__);
576
577	return count;
578};
579
580static ssize_t timestamp0_show(struct device *dev,
581			       struct device_attribute *attr, char *buf)
582{
583	struct i2c_client *client = to_i2c_client(dev->parent);
584	u8 regs[ISL1219_EVT_SECTION_LEN] = { 0, };
585	struct rtc_time tm;
586	int sr;
587
588	sr = isl1208_i2c_get_sr(client);
589	if (sr < 0) {
590		dev_err(dev, "%s: reading SR failed\n", __func__);
591		return sr;
592	}
593
594	if (!(sr & ISL1208_REG_SR_EVT))
595		return 0;
596
597	sr = isl1208_i2c_read_regs(client, ISL1219_REG_SCT, regs,
598				   ISL1219_EVT_SECTION_LEN);
599	if (sr < 0) {
600		dev_err(dev, "%s: reading event section failed\n",
601			__func__);
602		return 0;
603	}
604
605	/* MSB of each alarm register is an enable bit */
606	tm.tm_sec = bcd2bin(regs[ISL1219_REG_SCT - ISL1219_REG_SCT] & 0x7f);
607	tm.tm_min = bcd2bin(regs[ISL1219_REG_MNT - ISL1219_REG_SCT] & 0x7f);
608	tm.tm_hour = bcd2bin(regs[ISL1219_REG_HRT - ISL1219_REG_SCT] & 0x3f);
609	tm.tm_mday = bcd2bin(regs[ISL1219_REG_DTT - ISL1219_REG_SCT] & 0x3f);
610	tm.tm_mon =
611		bcd2bin(regs[ISL1219_REG_MOT - ISL1219_REG_SCT] & 0x1f) - 1;
612	tm.tm_year = bcd2bin(regs[ISL1219_REG_YRT - ISL1219_REG_SCT]) + 100;
613
614	sr = rtc_valid_tm(&tm);
615	if (sr)
616		return sr;
617
618	return sprintf(buf, "%llu\n",
619				(unsigned long long)rtc_tm_to_time64(&tm));
620};
621
622static DEVICE_ATTR_RW(timestamp0);
623
624static irqreturn_t
625isl1208_rtc_interrupt(int irq, void *data)
626{
627	unsigned long timeout = jiffies + msecs_to_jiffies(1000);
628	struct i2c_client *client = data;
629	struct isl1208_state *isl1208 = i2c_get_clientdata(client);
630	int handled = 0, sr, err;
631
632	if (!isl1208->config->has_tamper) {
633		/*
634		 * The INT# output is pulled low 250ms after the alarm is
635		 * triggered. After the INT# output is pulled low, it is low for
636		 * at least 250ms, even if the correct action is taken to clear
637		 * it. It is impossible to clear ALM if it is still active. The
638		 * host must wait for the RTC to progress past the alarm time
639		 * plus the 250ms delay before clearing ALM.
640		 */
641		msleep(250);
642	}
643
644	/*
645	 * I2C reads get NAK'ed if we read straight away after an interrupt?
646	 * Using a mdelay/msleep didn't seem to help either, so we work around
647	 * this by continually trying to read the register for a short time.
648	 */
649	while (1) {
650		sr = isl1208_i2c_get_sr(client);
651		if (sr >= 0)
652			break;
653
654		if (time_after(jiffies, timeout)) {
655			dev_err(&client->dev, "%s: reading SR failed\n",
656				__func__);
657			return sr;
658		}
659	}
660
661	if (sr & ISL1208_REG_SR_ALM) {
662		dev_dbg(&client->dev, "alarm!\n");
663
664		rtc_update_irq(isl1208->rtc, 1, RTC_IRQF | RTC_AF);
665
666		/* Disable the alarm */
667		err = isl1208_rtc_toggle_alarm(client, 0);
668		if (err)
669			return err;
670
671		fsleep(275);
672
673		/* Clear the alarm */
674		sr &= ~ISL1208_REG_SR_ALM;
675		sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR, sr);
676		if (sr < 0)
677			dev_err(&client->dev, "%s: writing SR failed\n",
678				__func__);
679		else
680			handled = 1;
681	}
682
683	if (isl1208->config->has_tamper && (sr & ISL1208_REG_SR_EVT)) {
684		dev_warn(&client->dev, "event detected");
685		handled = 1;
686		if (isl1208->config->has_timestamp)
687			sysfs_notify(&isl1208->rtc->dev.kobj, NULL,
688				     dev_attr_timestamp0.attr.name);
689	}
690
691	return handled ? IRQ_HANDLED : IRQ_NONE;
692}
693
694static const struct rtc_class_ops isl1208_rtc_ops = {
695	.proc = isl1208_rtc_proc,
696	.read_time = isl1208_rtc_read_time,
697	.set_time = isl1208_rtc_set_time,
698	.read_alarm = isl1208_rtc_read_alarm,
699	.set_alarm = isl1208_rtc_set_alarm,
700};
701
702/* sysfs interface */
703
704static ssize_t
705isl1208_sysfs_show_atrim(struct device *dev,
706			 struct device_attribute *attr, char *buf)
707{
708	int atr = isl1208_i2c_get_atr(to_i2c_client(dev->parent));
709	if (atr < 0)
710		return atr;
711
712	return sprintf(buf, "%d.%.2d pF\n", atr >> 2, (atr & 0x3) * 25);
713}
714
715static DEVICE_ATTR(atrim, S_IRUGO, isl1208_sysfs_show_atrim, NULL);
716
717static ssize_t
718isl1208_sysfs_show_dtrim(struct device *dev,
719			 struct device_attribute *attr, char *buf)
720{
721	int dtr = isl1208_i2c_get_dtr(to_i2c_client(dev->parent));
722	if (dtr < 0)
723		return dtr;
724
725	return sprintf(buf, "%d ppm\n", dtr - 100);
726}
727
728static DEVICE_ATTR(dtrim, S_IRUGO, isl1208_sysfs_show_dtrim, NULL);
729
730static ssize_t
731isl1208_sysfs_show_usr(struct device *dev,
732		       struct device_attribute *attr, char *buf)
733{
734	int usr = isl1208_i2c_get_usr(to_i2c_client(dev->parent));
735	if (usr < 0)
736		return usr;
737
738	return sprintf(buf, "0x%.4x\n", usr);
739}
740
741static ssize_t
742isl1208_sysfs_store_usr(struct device *dev,
743			struct device_attribute *attr,
744			const char *buf, size_t count)
745{
746	int usr = -1;
747
748	if (buf[0] == '0' && (buf[1] == 'x' || buf[1] == 'X')) {
749		if (sscanf(buf, "%x", &usr) != 1)
750			return -EINVAL;
751	} else {
752		if (sscanf(buf, "%d", &usr) != 1)
753			return -EINVAL;
754	}
755
756	if (usr < 0 || usr > 0xffff)
757		return -EINVAL;
758
759	if (isl1208_i2c_set_usr(to_i2c_client(dev->parent), usr))
760		return -EIO;
761
762	return count;
763}
764
765static DEVICE_ATTR(usr, S_IRUGO | S_IWUSR, isl1208_sysfs_show_usr,
766		   isl1208_sysfs_store_usr);
767
768static struct attribute *isl1208_rtc_attrs[] = {
769	&dev_attr_atrim.attr,
770	&dev_attr_dtrim.attr,
771	&dev_attr_usr.attr,
772	NULL
773};
774
775static const struct attribute_group isl1208_rtc_sysfs_files = {
776	.attrs	= isl1208_rtc_attrs,
777};
778
779static struct attribute *isl1219_rtc_attrs[] = {
780	&dev_attr_timestamp0.attr,
781	NULL
782};
783
784static const struct attribute_group isl1219_rtc_sysfs_files = {
785	.attrs	= isl1219_rtc_attrs,
786};
787
788static int isl1208_nvmem_read(void *priv, unsigned int off, void *buf,
789			      size_t count)
790{
791	struct isl1208_state *isl1208 = priv;
792	struct i2c_client *client = to_i2c_client(isl1208->rtc->dev.parent);
793
794	/* nvmem sanitizes offset/count for us, but count==0 is possible */
795	if (!count)
796		return count;
797
798	return isl1208_i2c_read_regs(client, ISL1208_REG_USR1 + off, buf,
799				    count);
800}
801
802static int isl1208_nvmem_write(void *priv, unsigned int off, void *buf,
803			       size_t count)
804{
805	struct isl1208_state *isl1208 = priv;
806	struct i2c_client *client = to_i2c_client(isl1208->rtc->dev.parent);
807
808	/* nvmem sanitizes off/count for us, but count==0 is possible */
809	if (!count)
810		return count;
811
812	return isl1208_i2c_set_regs(client, ISL1208_REG_USR1 + off, buf,
813				   count);
814}
815
816static const struct nvmem_config isl1208_nvmem_config = {
817	.name = "isl1208_nvram",
818	.word_size = 1,
819	.stride = 1,
820	/* .size from chip specific config */
821	.reg_read = isl1208_nvmem_read,
822	.reg_write = isl1208_nvmem_write,
823};
824
825static int isl1208_setup_irq(struct i2c_client *client, int irq)
826{
827	int rc = devm_request_threaded_irq(&client->dev, irq, NULL,
828					isl1208_rtc_interrupt,
829					IRQF_SHARED | IRQF_ONESHOT,
830					isl1208_driver.driver.name,
831					client);
832	if (!rc) {
833		device_init_wakeup(&client->dev, 1);
834		enable_irq_wake(irq);
835	} else {
836		dev_err(&client->dev,
837			"Unable to request irq %d, no alarm support\n",
838			irq);
839	}
840	return rc;
841}
842
843static int
844isl1208_clk_present(struct i2c_client *client, const char *name)
845{
846	struct clk *clk;
847
848	clk = devm_clk_get_optional(&client->dev, name);
849	if (IS_ERR(clk))
850		return PTR_ERR(clk);
851
852	return !!clk;
853}
854
855static int
856isl1208_probe(struct i2c_client *client)
857{
858	struct isl1208_state *isl1208;
859	int evdet_irq = -1;
860	int xtosb_val = 0;
861	int rc = 0;
862	int sr;
863
864	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
865		return -ENODEV;
866
867	if (isl1208_i2c_validate_client(client) < 0)
868		return -ENODEV;
869
870	/* Allocate driver state, point i2c client data to it */
871	isl1208 = devm_kzalloc(&client->dev, sizeof(*isl1208), GFP_KERNEL);
872	if (!isl1208)
873		return -ENOMEM;
874	i2c_set_clientdata(client, isl1208);
875
876	/* Determine which chip we have */
877	isl1208->config = i2c_get_match_data(client);
878	if (!isl1208->config)
879		return -ENODEV;
880
881	rc = isl1208_clk_present(client, "xin");
882	if (rc < 0)
883		return rc;
884
885	if (!rc) {
886		rc = isl1208_clk_present(client, "clkin");
887		if (rc < 0)
888			return rc;
889
890		if (rc)
891			xtosb_val = 1;
 
 
 
 
892	}
893
894	isl1208->rtc = devm_rtc_allocate_device(&client->dev);
895	if (IS_ERR(isl1208->rtc))
896		return PTR_ERR(isl1208->rtc);
897
898	isl1208->rtc->ops = &isl1208_rtc_ops;
899
900	/* Setup nvmem configuration in driver state struct */
901	isl1208->nvmem_config = isl1208_nvmem_config;
902	isl1208->nvmem_config.size = isl1208->config->nvmem_length;
903	isl1208->nvmem_config.priv = isl1208;
904
905	sr = isl1208_i2c_get_sr(client);
906	if (sr < 0) {
907		dev_err(&client->dev, "reading status failed\n");
908		return sr;
909	}
910
911	if (isl1208->config->has_inverted_osc_bit)
912		xtosb_val = !xtosb_val;
913
914	rc = isl1208_set_xtoscb(client, sr, xtosb_val);
915	if (rc)
916		return rc;
917
918	if (sr & ISL1208_REG_SR_RTCF)
919		dev_warn(&client->dev, "rtc power failure detected, "
920			 "please set clock.\n");
921
922	if (isl1208->config->has_tamper) {
923		struct device_node *np = client->dev.of_node;
924		u32 evienb;
925
926		rc = i2c_smbus_read_byte_data(client, ISL1219_REG_EV);
927		if (rc < 0) {
928			dev_err(&client->dev, "failed to read EV reg\n");
929			return rc;
930		}
931		rc |= ISL1219_REG_EV_EVEN;
932		if (!of_property_read_u32(np, "isil,ev-evienb", &evienb)) {
933			if (evienb)
934				rc |= ISL1219_REG_EV_EVIENB;
935			else
936				rc &= ~ISL1219_REG_EV_EVIENB;
937		}
938		rc = i2c_smbus_write_byte_data(client, ISL1219_REG_EV, rc);
939		if (rc < 0) {
940			dev_err(&client->dev, "could not enable tamper detection\n");
941			return rc;
942		}
943		evdet_irq = of_irq_get_byname(np, "evdet");
944	}
945	if (isl1208->config->has_timestamp) {
946		rc = rtc_add_group(isl1208->rtc, &isl1219_rtc_sysfs_files);
947		if (rc)
948			return rc;
949	}
950
951	rc = rtc_add_group(isl1208->rtc, &isl1208_rtc_sysfs_files);
952	if (rc)
953		return rc;
954
955	if (client->irq > 0) {
956		rc = isl1208_setup_irq(client, client->irq);
957		if (rc)
958			return rc;
959	} else {
960		clear_bit(RTC_FEATURE_UPDATE_INTERRUPT, isl1208->rtc->features);
961	}
962
963	if (evdet_irq > 0 && evdet_irq != client->irq)
964		rc = isl1208_setup_irq(client, evdet_irq);
965	if (rc)
966		return rc;
967
968	rc = devm_rtc_nvmem_register(isl1208->rtc, &isl1208->nvmem_config);
969	if (rc)
970		return rc;
971
972	return devm_rtc_register_device(isl1208->rtc);
973}
 
 
 
 
974
975static struct i2c_driver isl1208_driver = {
976	.driver = {
977		.name = "rtc-isl1208",
978		.of_match_table = of_match_ptr(isl1208_of_match),
979	},
980	.probe = isl1208_probe,
 
981	.id_table = isl1208_id,
982};
983
984module_i2c_driver(isl1208_driver);
985
986MODULE_AUTHOR("Herbert Valerio Riedel <hvr@gnu.org>");
987MODULE_DESCRIPTION("Intersil ISL1208 RTC driver");
988MODULE_LICENSE("GPL");