Linux Audio

Check our new training course

Loading...
v4.6
 
  1/*
  2 * Intersil ISL1208 rtc class driver
  3 *
  4 * Copyright 2005,2006 Hebert Valerio Riedel <hvr@gnu.org>
  5 *
  6 *  This program is free software; you can redistribute  it and/or modify it
  7 *  under  the terms of  the GNU General  Public License as published by the
  8 *  Free Software Foundation;  either version 2 of the  License, or (at your
  9 *  option) any later version.
 10 *
 11 */
 12
 13#include <linux/module.h>
 14#include <linux/i2c.h>
 15#include <linux/bcd.h>
 
 
 
 
 
 16#include <linux/rtc.h>
 17
 18#define DRV_VERSION "0.3"
 19
 20/* Register map */
 21/* rtc section */
 22#define ISL1208_REG_SC  0x00
 23#define ISL1208_REG_MN  0x01
 24#define ISL1208_REG_HR  0x02
 25#define ISL1208_REG_HR_MIL     (1<<7)	/* 24h/12h mode */
 26#define ISL1208_REG_HR_PM      (1<<5)	/* PM/AM bit in 12h mode */
 27#define ISL1208_REG_DT  0x03
 28#define ISL1208_REG_MO  0x04
 29#define ISL1208_REG_YR  0x05
 30#define ISL1208_REG_DW  0x06
 31#define ISL1208_RTC_SECTION_LEN 7
 32
 33/* control/status section */
 34#define ISL1208_REG_SR  0x07
 35#define ISL1208_REG_SR_ARST    (1<<7)	/* auto reset */
 36#define ISL1208_REG_SR_XTOSCB  (1<<6)	/* crystal oscillator */
 37#define ISL1208_REG_SR_WRTC    (1<<4)	/* write rtc */
 
 38#define ISL1208_REG_SR_ALM     (1<<2)	/* alarm */
 39#define ISL1208_REG_SR_BAT     (1<<1)	/* battery */
 40#define ISL1208_REG_SR_RTCF    (1<<0)	/* rtc fail */
 41#define ISL1208_REG_INT 0x08
 42#define ISL1208_REG_INT_ALME   (1<<6)   /* alarm enable */
 43#define ISL1208_REG_INT_IM     (1<<7)   /* interrupt/alarm mode */
 44#define ISL1208_REG_09  0x09	/* reserved */
 
 
 45#define ISL1208_REG_ATR 0x0a
 46#define ISL1208_REG_DTR 0x0b
 47
 48/* alarm section */
 49#define ISL1208_REG_SCA 0x0c
 50#define ISL1208_REG_MNA 0x0d
 51#define ISL1208_REG_HRA 0x0e
 52#define ISL1208_REG_DTA 0x0f
 53#define ISL1208_REG_MOA 0x10
 54#define ISL1208_REG_DWA 0x11
 55#define ISL1208_ALARM_SECTION_LEN 6
 56
 57/* user section */
 58#define ISL1208_REG_USR1 0x12
 59#define ISL1208_REG_USR2 0x13
 60#define ISL1208_USR_SECTION_LEN 2
 61
 
 
 
 
 
 
 
 
 
 62static struct i2c_driver isl1208_driver;
 63
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 64/* block read */
 65static int
 66isl1208_i2c_read_regs(struct i2c_client *client, u8 reg, u8 buf[],
 67		      unsigned len)
 68{
 69	u8 reg_addr[1] = { reg };
 70	struct i2c_msg msgs[2] = {
 71		{
 72			.addr = client->addr,
 73			.len = sizeof(reg_addr),
 74			.buf = reg_addr
 75		},
 76		{
 77			.addr = client->addr,
 78			.flags = I2C_M_RD,
 79			.len = len,
 80			.buf = buf
 81		}
 82	};
 83	int ret;
 84
 85	BUG_ON(reg > ISL1208_REG_USR2);
 86	BUG_ON(reg + len > ISL1208_REG_USR2 + 1);
 87
 88	ret = i2c_transfer(client->adapter, msgs, 2);
 89	if (ret > 0)
 90		ret = 0;
 91	return ret;
 92}
 93
 94/* block write */
 95static int
 96isl1208_i2c_set_regs(struct i2c_client *client, u8 reg, u8 const buf[],
 97		     unsigned len)
 98{
 99	u8 i2c_buf[ISL1208_REG_USR2 + 2];
100	struct i2c_msg msgs[1] = {
101		{
102			.addr = client->addr,
103			.len = len + 1,
104			.buf = i2c_buf
105		}
106	};
107	int ret;
108
109	BUG_ON(reg > ISL1208_REG_USR2);
110	BUG_ON(reg + len > ISL1208_REG_USR2 + 1);
111
112	i2c_buf[0] = reg;
113	memcpy(&i2c_buf[1], &buf[0], len);
114
115	ret = i2c_transfer(client->adapter, msgs, 1);
116	if (ret > 0)
117		ret = 0;
118	return ret;
119}
120
121/* simple check to see whether we have a isl1208 */
122static int
123isl1208_i2c_validate_client(struct i2c_client *client)
124{
125	u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
126	u8 zero_mask[ISL1208_RTC_SECTION_LEN] = {
127		0x80, 0x80, 0x40, 0xc0, 0xe0, 0x00, 0xf8
128	};
129	int i;
130	int ret;
131
132	ret = isl1208_i2c_read_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN);
133	if (ret < 0)
134		return ret;
135
136	for (i = 0; i < ISL1208_RTC_SECTION_LEN; ++i) {
137		if (regs[i] & zero_mask[i])	/* check if bits are cleared */
138			return -ENODEV;
139	}
140
141	return 0;
142}
143
 
 
 
 
 
 
 
 
 
 
 
 
 
 
144static int
145isl1208_i2c_get_sr(struct i2c_client *client)
146{
147	return i2c_smbus_read_byte_data(client, ISL1208_REG_SR);
148}
149
150static int
151isl1208_i2c_get_atr(struct i2c_client *client)
152{
153	int atr = i2c_smbus_read_byte_data(client, ISL1208_REG_ATR);
154	if (atr < 0)
155		return atr;
156
157	/* The 6bit value in the ATR register controls the load
158	 * capacitance C_load * in steps of 0.25pF
159	 *
160	 * bit (1<<5) of the ATR register is inverted
161	 *
162	 * C_load(ATR=0x20) =  4.50pF
163	 * C_load(ATR=0x00) = 12.50pF
164	 * C_load(ATR=0x1f) = 20.25pF
165	 *
166	 */
167
168	atr &= 0x3f;		/* mask out lsb */
169	atr ^= 1 << 5;		/* invert 6th bit */
170	atr += 2 * 9;		/* add offset of 4.5pF; unit[atr] = 0.25pF */
171
172	return atr;
173}
174
 
175static int
176isl1208_i2c_get_dtr(struct i2c_client *client)
177{
178	int dtr = i2c_smbus_read_byte_data(client, ISL1208_REG_DTR);
179	if (dtr < 0)
180		return -EIO;
181
182	/* dtr encodes adjustments of {-60,-40,-20,0,20,40,60} ppm */
183	dtr = ((dtr & 0x3) * 20) * (dtr & (1 << 2) ? -1 : 1);
184
185	return dtr;
186}
187
188static int
189isl1208_i2c_get_usr(struct i2c_client *client)
190{
191	u8 buf[ISL1208_USR_SECTION_LEN] = { 0, };
192	int ret;
193
194	ret = isl1208_i2c_read_regs(client, ISL1208_REG_USR1, buf,
195				    ISL1208_USR_SECTION_LEN);
196	if (ret < 0)
197		return ret;
198
199	return (buf[1] << 8) | buf[0];
200}
201
202static int
203isl1208_i2c_set_usr(struct i2c_client *client, u16 usr)
204{
205	u8 buf[ISL1208_USR_SECTION_LEN];
206
207	buf[0] = usr & 0xff;
208	buf[1] = (usr >> 8) & 0xff;
209
210	return isl1208_i2c_set_regs(client, ISL1208_REG_USR1, buf,
211				    ISL1208_USR_SECTION_LEN);
212}
213
214static int
215isl1208_rtc_toggle_alarm(struct i2c_client *client, int enable)
216{
217	int icr = i2c_smbus_read_byte_data(client, ISL1208_REG_INT);
218
219	if (icr < 0) {
220		dev_err(&client->dev, "%s: reading INT failed\n", __func__);
221		return icr;
222	}
223
224	if (enable)
225		icr |= ISL1208_REG_INT_ALME | ISL1208_REG_INT_IM;
226	else
227		icr &= ~(ISL1208_REG_INT_ALME | ISL1208_REG_INT_IM);
228
229	icr = i2c_smbus_write_byte_data(client, ISL1208_REG_INT, icr);
230	if (icr < 0) {
231		dev_err(&client->dev, "%s: writing INT failed\n", __func__);
232		return icr;
233	}
234
235	return 0;
236}
237
238static int
239isl1208_rtc_proc(struct device *dev, struct seq_file *seq)
240{
241	struct i2c_client *const client = to_i2c_client(dev);
242	int sr, dtr, atr, usr;
243
244	sr = isl1208_i2c_get_sr(client);
245	if (sr < 0) {
246		dev_err(&client->dev, "%s: reading SR failed\n", __func__);
247		return sr;
248	}
249
250	seq_printf(seq, "status_reg\t:%s%s%s%s%s%s (0x%.2x)\n",
251		   (sr & ISL1208_REG_SR_RTCF) ? " RTCF" : "",
252		   (sr & ISL1208_REG_SR_BAT) ? " BAT" : "",
253		   (sr & ISL1208_REG_SR_ALM) ? " ALM" : "",
254		   (sr & ISL1208_REG_SR_WRTC) ? " WRTC" : "",
255		   (sr & ISL1208_REG_SR_XTOSCB) ? " XTOSCB" : "",
256		   (sr & ISL1208_REG_SR_ARST) ? " ARST" : "", sr);
257
258	seq_printf(seq, "batt_status\t: %s\n",
259		   (sr & ISL1208_REG_SR_RTCF) ? "bad" : "okay");
260
261	dtr = isl1208_i2c_get_dtr(client);
262	if (dtr >= 0 - 1)
263		seq_printf(seq, "digital_trim\t: %d ppm\n", dtr);
264
265	atr = isl1208_i2c_get_atr(client);
266	if (atr >= 0)
267		seq_printf(seq, "analog_trim\t: %d.%.2d pF\n",
268			   atr >> 2, (atr & 0x3) * 25);
269
270	usr = isl1208_i2c_get_usr(client);
271	if (usr >= 0)
272		seq_printf(seq, "user_data\t: 0x%.4x\n", usr);
273
274	return 0;
275}
276
277static int
278isl1208_i2c_read_time(struct i2c_client *client, struct rtc_time *tm)
279{
280	int sr;
281	u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
282
283	sr = isl1208_i2c_get_sr(client);
284	if (sr < 0) {
285		dev_err(&client->dev, "%s: reading SR failed\n", __func__);
286		return -EIO;
287	}
288
289	sr = isl1208_i2c_read_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN);
290	if (sr < 0) {
291		dev_err(&client->dev, "%s: reading RTC section failed\n",
292			__func__);
293		return sr;
294	}
295
296	tm->tm_sec = bcd2bin(regs[ISL1208_REG_SC]);
297	tm->tm_min = bcd2bin(regs[ISL1208_REG_MN]);
298
299	/* HR field has a more complex interpretation */
300	{
301		const u8 _hr = regs[ISL1208_REG_HR];
302		if (_hr & ISL1208_REG_HR_MIL)	/* 24h format */
303			tm->tm_hour = bcd2bin(_hr & 0x3f);
304		else {
305			/* 12h format */
306			tm->tm_hour = bcd2bin(_hr & 0x1f);
307			if (_hr & ISL1208_REG_HR_PM)	/* PM flag set */
308				tm->tm_hour += 12;
309		}
310	}
311
312	tm->tm_mday = bcd2bin(regs[ISL1208_REG_DT]);
313	tm->tm_mon = bcd2bin(regs[ISL1208_REG_MO]) - 1;	/* rtc starts at 1 */
314	tm->tm_year = bcd2bin(regs[ISL1208_REG_YR]) + 100;
315	tm->tm_wday = bcd2bin(regs[ISL1208_REG_DW]);
316
317	return 0;
318}
319
320static int
321isl1208_i2c_read_alarm(struct i2c_client *client, struct rtc_wkalrm *alarm)
322{
323	struct rtc_time *const tm = &alarm->time;
324	u8 regs[ISL1208_ALARM_SECTION_LEN] = { 0, };
325	int icr, yr, sr = isl1208_i2c_get_sr(client);
326
327	if (sr < 0) {
328		dev_err(&client->dev, "%s: reading SR failed\n", __func__);
329		return sr;
330	}
331
332	sr = isl1208_i2c_read_regs(client, ISL1208_REG_SCA, regs,
333				   ISL1208_ALARM_SECTION_LEN);
334	if (sr < 0) {
335		dev_err(&client->dev, "%s: reading alarm section failed\n",
336			__func__);
337		return sr;
338	}
339
340	/* MSB of each alarm register is an enable bit */
341	tm->tm_sec = bcd2bin(regs[ISL1208_REG_SCA - ISL1208_REG_SCA] & 0x7f);
342	tm->tm_min = bcd2bin(regs[ISL1208_REG_MNA - ISL1208_REG_SCA] & 0x7f);
343	tm->tm_hour = bcd2bin(regs[ISL1208_REG_HRA - ISL1208_REG_SCA] & 0x3f);
344	tm->tm_mday = bcd2bin(regs[ISL1208_REG_DTA - ISL1208_REG_SCA] & 0x3f);
345	tm->tm_mon =
346		bcd2bin(regs[ISL1208_REG_MOA - ISL1208_REG_SCA] & 0x1f) - 1;
347	tm->tm_wday = bcd2bin(regs[ISL1208_REG_DWA - ISL1208_REG_SCA] & 0x03);
348
349	/* The alarm doesn't store the year so get it from the rtc section */
350	yr = i2c_smbus_read_byte_data(client, ISL1208_REG_YR);
351	if (yr < 0) {
352		dev_err(&client->dev, "%s: reading RTC YR failed\n", __func__);
353		return yr;
354	}
355	tm->tm_year = bcd2bin(yr) + 100;
356
357	icr = i2c_smbus_read_byte_data(client, ISL1208_REG_INT);
358	if (icr < 0) {
359		dev_err(&client->dev, "%s: reading INT failed\n", __func__);
360		return icr;
361	}
362	alarm->enabled = !!(icr & ISL1208_REG_INT_ALME);
363
364	return 0;
365}
366
367static int
368isl1208_i2c_set_alarm(struct i2c_client *client, struct rtc_wkalrm *alarm)
369{
370	struct rtc_time *alarm_tm = &alarm->time;
371	u8 regs[ISL1208_ALARM_SECTION_LEN] = { 0, };
372	const int offs = ISL1208_REG_SCA;
373	struct rtc_time rtc_tm;
374	int err, enable;
375
376	err = isl1208_i2c_read_time(client, &rtc_tm);
377	if (err)
378		return err;
379
380	/* If the alarm time is before the current time disable the alarm */
381	if (!alarm->enabled || rtc_tm_sub(alarm_tm, &rtc_tm) <= 0)
382		enable = 0x00;
383	else
384		enable = 0x80;
385
386	/* Program the alarm and enable it for each setting */
387	regs[ISL1208_REG_SCA - offs] = bin2bcd(alarm_tm->tm_sec) | enable;
388	regs[ISL1208_REG_MNA - offs] = bin2bcd(alarm_tm->tm_min) | enable;
389	regs[ISL1208_REG_HRA - offs] = bin2bcd(alarm_tm->tm_hour) |
390		ISL1208_REG_HR_MIL | enable;
391
392	regs[ISL1208_REG_DTA - offs] = bin2bcd(alarm_tm->tm_mday) | enable;
393	regs[ISL1208_REG_MOA - offs] = bin2bcd(alarm_tm->tm_mon + 1) | enable;
394	regs[ISL1208_REG_DWA - offs] = bin2bcd(alarm_tm->tm_wday & 7) | enable;
395
396	/* write ALARM registers */
397	err = isl1208_i2c_set_regs(client, offs, regs,
398				  ISL1208_ALARM_SECTION_LEN);
399	if (err < 0) {
400		dev_err(&client->dev, "%s: writing ALARM section failed\n",
401			__func__);
402		return err;
403	}
404
405	err = isl1208_rtc_toggle_alarm(client, enable);
406	if (err)
407		return err;
408
409	return 0;
410}
411
412static int
413isl1208_rtc_read_time(struct device *dev, struct rtc_time *tm)
414{
415	return isl1208_i2c_read_time(to_i2c_client(dev), tm);
416}
417
418static int
419isl1208_i2c_set_time(struct i2c_client *client, struct rtc_time const *tm)
420{
421	int sr;
422	u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
423
424	/* The clock has an 8 bit wide bcd-coded register (they never learn)
425	 * for the year. tm_year is an offset from 1900 and we are interested
426	 * in the 2000-2099 range, so any value less than 100 is invalid.
427	 */
428	if (tm->tm_year < 100)
429		return -EINVAL;
430
431	regs[ISL1208_REG_SC] = bin2bcd(tm->tm_sec);
432	regs[ISL1208_REG_MN] = bin2bcd(tm->tm_min);
433	regs[ISL1208_REG_HR] = bin2bcd(tm->tm_hour) | ISL1208_REG_HR_MIL;
434
435	regs[ISL1208_REG_DT] = bin2bcd(tm->tm_mday);
436	regs[ISL1208_REG_MO] = bin2bcd(tm->tm_mon + 1);
437	regs[ISL1208_REG_YR] = bin2bcd(tm->tm_year - 100);
438
439	regs[ISL1208_REG_DW] = bin2bcd(tm->tm_wday & 7);
440
441	sr = isl1208_i2c_get_sr(client);
442	if (sr < 0) {
443		dev_err(&client->dev, "%s: reading SR failed\n", __func__);
444		return sr;
445	}
446
447	/* set WRTC */
448	sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR,
449				       sr | ISL1208_REG_SR_WRTC);
450	if (sr < 0) {
451		dev_err(&client->dev, "%s: writing SR failed\n", __func__);
452		return sr;
453	}
454
455	/* write RTC registers */
456	sr = isl1208_i2c_set_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN);
457	if (sr < 0) {
458		dev_err(&client->dev, "%s: writing RTC section failed\n",
459			__func__);
460		return sr;
461	}
462
463	/* clear WRTC again */
 
 
 
 
 
464	sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR,
465				       sr & ~ISL1208_REG_SR_WRTC);
466	if (sr < 0) {
467		dev_err(&client->dev, "%s: writing SR failed\n", __func__);
468		return sr;
469	}
470
471	return 0;
472}
473
474
475static int
476isl1208_rtc_set_time(struct device *dev, struct rtc_time *tm)
477{
478	return isl1208_i2c_set_time(to_i2c_client(dev), tm);
479}
480
481static int
482isl1208_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
483{
484	return isl1208_i2c_read_alarm(to_i2c_client(dev), alarm);
485}
486
487static int
488isl1208_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
489{
490	return isl1208_i2c_set_alarm(to_i2c_client(dev), alarm);
491}
492
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
493static irqreturn_t
494isl1208_rtc_interrupt(int irq, void *data)
495{
496	unsigned long timeout = jiffies + msecs_to_jiffies(1000);
497	struct i2c_client *client = data;
498	struct rtc_device *rtc = i2c_get_clientdata(client);
499	int handled = 0, sr, err;
500
501	/*
502	 * I2C reads get NAK'ed if we read straight away after an interrupt?
503	 * Using a mdelay/msleep didn't seem to help either, so we work around
504	 * this by continually trying to read the register for a short time.
505	 */
506	while (1) {
507		sr = isl1208_i2c_get_sr(client);
508		if (sr >= 0)
509			break;
510
511		if (time_after(jiffies, timeout)) {
512			dev_err(&client->dev, "%s: reading SR failed\n",
513				__func__);
514			return sr;
515		}
516	}
517
518	if (sr & ISL1208_REG_SR_ALM) {
519		dev_dbg(&client->dev, "alarm!\n");
520
521		rtc_update_irq(rtc, 1, RTC_IRQF | RTC_AF);
522
523		/* Clear the alarm */
524		sr &= ~ISL1208_REG_SR_ALM;
525		sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR, sr);
526		if (sr < 0)
527			dev_err(&client->dev, "%s: writing SR failed\n",
528				__func__);
529		else
530			handled = 1;
531
532		/* Disable the alarm */
533		err = isl1208_rtc_toggle_alarm(client, 0);
534		if (err)
535			return err;
536	}
537
 
 
 
 
 
 
 
 
538	return handled ? IRQ_HANDLED : IRQ_NONE;
539}
540
541static const struct rtc_class_ops isl1208_rtc_ops = {
542	.proc = isl1208_rtc_proc,
543	.read_time = isl1208_rtc_read_time,
544	.set_time = isl1208_rtc_set_time,
545	.read_alarm = isl1208_rtc_read_alarm,
546	.set_alarm = isl1208_rtc_set_alarm,
547};
548
549/* sysfs interface */
550
551static ssize_t
552isl1208_sysfs_show_atrim(struct device *dev,
553			 struct device_attribute *attr, char *buf)
554{
555	int atr = isl1208_i2c_get_atr(to_i2c_client(dev));
556	if (atr < 0)
557		return atr;
558
559	return sprintf(buf, "%d.%.2d pF\n", atr >> 2, (atr & 0x3) * 25);
560}
561
562static DEVICE_ATTR(atrim, S_IRUGO, isl1208_sysfs_show_atrim, NULL);
563
564static ssize_t
565isl1208_sysfs_show_dtrim(struct device *dev,
566			 struct device_attribute *attr, char *buf)
567{
568	int dtr = isl1208_i2c_get_dtr(to_i2c_client(dev));
569	if (dtr < 0)
570		return dtr;
571
572	return sprintf(buf, "%d ppm\n", dtr);
573}
574
575static DEVICE_ATTR(dtrim, S_IRUGO, isl1208_sysfs_show_dtrim, NULL);
576
577static ssize_t
578isl1208_sysfs_show_usr(struct device *dev,
579		       struct device_attribute *attr, char *buf)
580{
581	int usr = isl1208_i2c_get_usr(to_i2c_client(dev));
582	if (usr < 0)
583		return usr;
584
585	return sprintf(buf, "0x%.4x\n", usr);
586}
587
588static ssize_t
589isl1208_sysfs_store_usr(struct device *dev,
590			struct device_attribute *attr,
591			const char *buf, size_t count)
592{
593	int usr = -1;
594
595	if (buf[0] == '0' && (buf[1] == 'x' || buf[1] == 'X')) {
596		if (sscanf(buf, "%x", &usr) != 1)
597			return -EINVAL;
598	} else {
599		if (sscanf(buf, "%d", &usr) != 1)
600			return -EINVAL;
601	}
602
603	if (usr < 0 || usr > 0xffff)
604		return -EINVAL;
605
606	return isl1208_i2c_set_usr(to_i2c_client(dev), usr) ? -EIO : count;
 
 
 
607}
608
609static DEVICE_ATTR(usr, S_IRUGO | S_IWUSR, isl1208_sysfs_show_usr,
610		   isl1208_sysfs_store_usr);
611
612static struct attribute *isl1208_rtc_attrs[] = {
613	&dev_attr_atrim.attr,
614	&dev_attr_dtrim.attr,
615	&dev_attr_usr.attr,
616	NULL
617};
618
619static const struct attribute_group isl1208_rtc_sysfs_files = {
620	.attrs	= isl1208_rtc_attrs,
621};
622
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
623static int
624isl1208_probe(struct i2c_client *client, const struct i2c_device_id *id)
625{
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
626	int rc = 0;
627	struct rtc_device *rtc;
628
629	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
630		return -ENODEV;
631
632	if (isl1208_i2c_validate_client(client) < 0)
633		return -ENODEV;
634
635	dev_info(&client->dev,
636		 "chip found, driver version " DRV_VERSION "\n");
 
 
 
 
 
 
 
 
 
 
 
 
637
638	if (client->irq > 0) {
639		rc = devm_request_threaded_irq(&client->dev, client->irq, NULL,
640					       isl1208_rtc_interrupt,
641					       IRQF_SHARED | IRQF_ONESHOT,
642					       isl1208_driver.driver.name,
643					       client);
644		if (!rc) {
645			device_init_wakeup(&client->dev, 1);
646			enable_irq_wake(client->irq);
647		} else {
648			dev_err(&client->dev,
649				"Unable to request irq %d, no alarm support\n",
650				client->irq);
651			client->irq = 0;
652		}
653	}
654
655	rtc = devm_rtc_device_register(&client->dev, isl1208_driver.driver.name,
656				  &isl1208_rtc_ops,
657				  THIS_MODULE);
658	if (IS_ERR(rtc))
659		return PTR_ERR(rtc);
660
661	i2c_set_clientdata(client, rtc);
662
663	rc = isl1208_i2c_get_sr(client);
664	if (rc < 0) {
 
 
 
 
 
665		dev_err(&client->dev, "reading status failed\n");
666		return rc;
667	}
668
669	if (rc & ISL1208_REG_SR_RTCF)
 
 
 
 
 
 
 
670		dev_warn(&client->dev, "rtc power failure detected, "
671			 "please set clock.\n");
672
673	rc = sysfs_create_group(&client->dev.kobj, &isl1208_rtc_sysfs_files);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
674	if (rc)
675		return rc;
676
677	return 0;
678}
 
 
 
 
 
679
680static int
681isl1208_remove(struct i2c_client *client)
682{
683	sysfs_remove_group(&client->dev.kobj, &isl1208_rtc_sysfs_files);
684
685	return 0;
686}
 
687
688static const struct i2c_device_id isl1208_id[] = {
689	{ "isl1208", 0 },
690	{ "isl1218", 0 },
691	{ }
692};
693MODULE_DEVICE_TABLE(i2c, isl1208_id);
694
695static struct i2c_driver isl1208_driver = {
696	.driver = {
697		   .name = "rtc-isl1208",
698		   },
 
699	.probe = isl1208_probe,
700	.remove = isl1208_remove,
701	.id_table = isl1208_id,
702};
703
704module_i2c_driver(isl1208_driver);
705
706MODULE_AUTHOR("Herbert Valerio Riedel <hvr@gnu.org>");
707MODULE_DESCRIPTION("Intersil ISL1208 RTC driver");
708MODULE_LICENSE("GPL");
709MODULE_VERSION(DRV_VERSION);
v6.8
  1// SPDX-License-Identifier: GPL-2.0-or-later
  2/*
  3 * Intersil ISL1208 rtc class driver
  4 *
  5 * Copyright 2005,2006 Hebert Valerio Riedel <hvr@gnu.org>
 
 
 
 
 
 
  6 */
  7
 
 
  8#include <linux/bcd.h>
  9#include <linux/clk.h>
 10#include <linux/i2c.h>
 11#include <linux/module.h>
 12#include <linux/of.h>
 13#include <linux/of_irq.h>
 14#include <linux/rtc.h>
 15
 
 
 16/* Register map */
 17/* rtc section */
 18#define ISL1208_REG_SC  0x00
 19#define ISL1208_REG_MN  0x01
 20#define ISL1208_REG_HR  0x02
 21#define ISL1208_REG_HR_MIL     (1<<7)	/* 24h/12h mode */
 22#define ISL1208_REG_HR_PM      (1<<5)	/* PM/AM bit in 12h mode */
 23#define ISL1208_REG_DT  0x03
 24#define ISL1208_REG_MO  0x04
 25#define ISL1208_REG_YR  0x05
 26#define ISL1208_REG_DW  0x06
 27#define ISL1208_RTC_SECTION_LEN 7
 28
 29/* control/status section */
 30#define ISL1208_REG_SR  0x07
 31#define ISL1208_REG_SR_ARST    (1<<7)	/* auto reset */
 32#define ISL1208_REG_SR_XTOSCB  (1<<6)	/* crystal oscillator */
 33#define ISL1208_REG_SR_WRTC    (1<<4)	/* write rtc */
 34#define ISL1208_REG_SR_EVT     (1<<3)	/* event */
 35#define ISL1208_REG_SR_ALM     (1<<2)	/* alarm */
 36#define ISL1208_REG_SR_BAT     (1<<1)	/* battery */
 37#define ISL1208_REG_SR_RTCF    (1<<0)	/* rtc fail */
 38#define ISL1208_REG_INT 0x08
 39#define ISL1208_REG_INT_ALME   (1<<6)   /* alarm enable */
 40#define ISL1208_REG_INT_IM     (1<<7)   /* interrupt/alarm mode */
 41#define ISL1219_REG_EV  0x09
 42#define ISL1219_REG_EV_EVEN    (1<<4)   /* event detection enable */
 43#define ISL1219_REG_EV_EVIENB  (1<<7)   /* event in pull-up disable */
 44#define ISL1208_REG_ATR 0x0a
 45#define ISL1208_REG_DTR 0x0b
 46
 47/* alarm section */
 48#define ISL1208_REG_SCA 0x0c
 49#define ISL1208_REG_MNA 0x0d
 50#define ISL1208_REG_HRA 0x0e
 51#define ISL1208_REG_DTA 0x0f
 52#define ISL1208_REG_MOA 0x10
 53#define ISL1208_REG_DWA 0x11
 54#define ISL1208_ALARM_SECTION_LEN 6
 55
 56/* user section */
 57#define ISL1208_REG_USR1 0x12
 58#define ISL1208_REG_USR2 0x13
 59#define ISL1208_USR_SECTION_LEN 2
 60
 61/* event section */
 62#define ISL1219_REG_SCT 0x14
 63#define ISL1219_REG_MNT 0x15
 64#define ISL1219_REG_HRT 0x16
 65#define ISL1219_REG_DTT 0x17
 66#define ISL1219_REG_MOT 0x18
 67#define ISL1219_REG_YRT 0x19
 68#define ISL1219_EVT_SECTION_LEN 6
 69
 70static struct i2c_driver isl1208_driver;
 71
 72/* Chip capabilities table */
 73struct isl1208_config {
 74	unsigned int	nvmem_length;
 75	unsigned	has_tamper:1;
 76	unsigned	has_timestamp:1;
 77	unsigned	has_inverted_osc_bit:1;
 78};
 79
 80static const struct isl1208_config config_isl1208 = {
 81	.nvmem_length = 2,
 82	.has_tamper = false,
 83	.has_timestamp = false
 84};
 85
 86static const struct isl1208_config config_isl1209 = {
 87	.nvmem_length = 2,
 88	.has_tamper = true,
 89	.has_timestamp = false
 90};
 91
 92static const struct isl1208_config config_isl1218 = {
 93	.nvmem_length = 8,
 94	.has_tamper = false,
 95	.has_timestamp = false
 96};
 97
 98static const struct isl1208_config config_isl1219 = {
 99	.nvmem_length = 2,
100	.has_tamper = true,
101	.has_timestamp = true
102};
103
104static const struct isl1208_config config_raa215300_a0 = {
105	.nvmem_length = 2,
106	.has_tamper = false,
107	.has_timestamp = false,
108	.has_inverted_osc_bit = true
109};
110
111static const struct i2c_device_id isl1208_id[] = {
112	{ "isl1208", .driver_data = (kernel_ulong_t)&config_isl1208 },
113	{ "isl1209", .driver_data = (kernel_ulong_t)&config_isl1209 },
114	{ "isl1218", .driver_data = (kernel_ulong_t)&config_isl1218 },
115	{ "isl1219", .driver_data = (kernel_ulong_t)&config_isl1219 },
116	{ "raa215300_a0", .driver_data = (kernel_ulong_t)&config_raa215300_a0 },
117	{ }
118};
119MODULE_DEVICE_TABLE(i2c, isl1208_id);
120
121static const __maybe_unused struct of_device_id isl1208_of_match[] = {
122	{ .compatible = "isil,isl1208", .data = &config_isl1208 },
123	{ .compatible = "isil,isl1209", .data = &config_isl1209 },
124	{ .compatible = "isil,isl1218", .data = &config_isl1218 },
125	{ .compatible = "isil,isl1219", .data = &config_isl1219 },
126	{ }
127};
128MODULE_DEVICE_TABLE(of, isl1208_of_match);
129
130/* Device state */
131struct isl1208_state {
132	struct nvmem_config nvmem_config;
133	struct rtc_device *rtc;
134	const struct isl1208_config *config;
135};
136
137/* block read */
138static int
139isl1208_i2c_read_regs(struct i2c_client *client, u8 reg, u8 buf[],
140		      unsigned len)
141{
 
 
 
 
 
 
 
 
 
 
 
 
 
 
142	int ret;
143
144	WARN_ON(reg > ISL1219_REG_YRT);
145	WARN_ON(reg + len > ISL1219_REG_YRT + 1);
146
147	ret = i2c_smbus_read_i2c_block_data(client, reg, len, buf);
148	return (ret < 0) ? ret : 0;
 
 
149}
150
151/* block write */
152static int
153isl1208_i2c_set_regs(struct i2c_client *client, u8 reg, u8 const buf[],
154		     unsigned len)
155{
 
 
 
 
 
 
 
 
156	int ret;
157
158	WARN_ON(reg > ISL1219_REG_YRT);
159	WARN_ON(reg + len > ISL1219_REG_YRT + 1);
 
 
 
160
161	ret = i2c_smbus_write_i2c_block_data(client, reg, len, buf);
162	return (ret < 0) ? ret : 0;
 
 
163}
164
165/* simple check to see whether we have a isl1208 */
166static int
167isl1208_i2c_validate_client(struct i2c_client *client)
168{
169	u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
170	u8 zero_mask[ISL1208_RTC_SECTION_LEN] = {
171		0x80, 0x80, 0x40, 0xc0, 0xe0, 0x00, 0xf8
172	};
173	int i;
174	int ret;
175
176	ret = isl1208_i2c_read_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN);
177	if (ret < 0)
178		return ret;
179
180	for (i = 0; i < ISL1208_RTC_SECTION_LEN; ++i) {
181		if (regs[i] & zero_mask[i])	/* check if bits are cleared */
182			return -ENODEV;
183	}
184
185	return 0;
186}
187
188static int isl1208_set_xtoscb(struct i2c_client *client, int sr, int xtosb_val)
189{
190	/* Do nothing if bit is already set to desired value */
191	if (!!(sr & ISL1208_REG_SR_XTOSCB) == xtosb_val)
192		return 0;
193
194	if (xtosb_val)
195		sr |= ISL1208_REG_SR_XTOSCB;
196	else
197		sr &= ~ISL1208_REG_SR_XTOSCB;
198
199	return i2c_smbus_write_byte_data(client, ISL1208_REG_SR, sr);
200}
201
202static int
203isl1208_i2c_get_sr(struct i2c_client *client)
204{
205	return i2c_smbus_read_byte_data(client, ISL1208_REG_SR);
206}
207
208static int
209isl1208_i2c_get_atr(struct i2c_client *client)
210{
211	int atr = i2c_smbus_read_byte_data(client, ISL1208_REG_ATR);
212	if (atr < 0)
213		return atr;
214
215	/* The 6bit value in the ATR register controls the load
216	 * capacitance C_load * in steps of 0.25pF
217	 *
218	 * bit (1<<5) of the ATR register is inverted
219	 *
220	 * C_load(ATR=0x20) =  4.50pF
221	 * C_load(ATR=0x00) = 12.50pF
222	 * C_load(ATR=0x1f) = 20.25pF
223	 *
224	 */
225
226	atr &= 0x3f;		/* mask out lsb */
227	atr ^= 1 << 5;		/* invert 6th bit */
228	atr += 2 * 9;		/* add offset of 4.5pF; unit[atr] = 0.25pF */
229
230	return atr;
231}
232
233/* returns adjustment value + 100 */
234static int
235isl1208_i2c_get_dtr(struct i2c_client *client)
236{
237	int dtr = i2c_smbus_read_byte_data(client, ISL1208_REG_DTR);
238	if (dtr < 0)
239		return -EIO;
240
241	/* dtr encodes adjustments of {-60,-40,-20,0,20,40,60} ppm */
242	dtr = ((dtr & 0x3) * 20) * (dtr & (1 << 2) ? -1 : 1);
243
244	return dtr + 100;
245}
246
247static int
248isl1208_i2c_get_usr(struct i2c_client *client)
249{
250	u8 buf[ISL1208_USR_SECTION_LEN] = { 0, };
251	int ret;
252
253	ret = isl1208_i2c_read_regs(client, ISL1208_REG_USR1, buf,
254				    ISL1208_USR_SECTION_LEN);
255	if (ret < 0)
256		return ret;
257
258	return (buf[1] << 8) | buf[0];
259}
260
261static int
262isl1208_i2c_set_usr(struct i2c_client *client, u16 usr)
263{
264	u8 buf[ISL1208_USR_SECTION_LEN];
265
266	buf[0] = usr & 0xff;
267	buf[1] = (usr >> 8) & 0xff;
268
269	return isl1208_i2c_set_regs(client, ISL1208_REG_USR1, buf,
270				    ISL1208_USR_SECTION_LEN);
271}
272
273static int
274isl1208_rtc_toggle_alarm(struct i2c_client *client, int enable)
275{
276	int icr = i2c_smbus_read_byte_data(client, ISL1208_REG_INT);
277
278	if (icr < 0) {
279		dev_err(&client->dev, "%s: reading INT failed\n", __func__);
280		return icr;
281	}
282
283	if (enable)
284		icr |= ISL1208_REG_INT_ALME | ISL1208_REG_INT_IM;
285	else
286		icr &= ~(ISL1208_REG_INT_ALME | ISL1208_REG_INT_IM);
287
288	icr = i2c_smbus_write_byte_data(client, ISL1208_REG_INT, icr);
289	if (icr < 0) {
290		dev_err(&client->dev, "%s: writing INT failed\n", __func__);
291		return icr;
292	}
293
294	return 0;
295}
296
297static int
298isl1208_rtc_proc(struct device *dev, struct seq_file *seq)
299{
300	struct i2c_client *const client = to_i2c_client(dev);
301	int sr, dtr, atr, usr;
302
303	sr = isl1208_i2c_get_sr(client);
304	if (sr < 0) {
305		dev_err(&client->dev, "%s: reading SR failed\n", __func__);
306		return sr;
307	}
308
309	seq_printf(seq, "status_reg\t:%s%s%s%s%s%s (0x%.2x)\n",
310		   (sr & ISL1208_REG_SR_RTCF) ? " RTCF" : "",
311		   (sr & ISL1208_REG_SR_BAT) ? " BAT" : "",
312		   (sr & ISL1208_REG_SR_ALM) ? " ALM" : "",
313		   (sr & ISL1208_REG_SR_WRTC) ? " WRTC" : "",
314		   (sr & ISL1208_REG_SR_XTOSCB) ? " XTOSCB" : "",
315		   (sr & ISL1208_REG_SR_ARST) ? " ARST" : "", sr);
316
317	seq_printf(seq, "batt_status\t: %s\n",
318		   (sr & ISL1208_REG_SR_RTCF) ? "bad" : "okay");
319
320	dtr = isl1208_i2c_get_dtr(client);
321	if (dtr >= 0)
322		seq_printf(seq, "digital_trim\t: %d ppm\n", dtr - 100);
323
324	atr = isl1208_i2c_get_atr(client);
325	if (atr >= 0)
326		seq_printf(seq, "analog_trim\t: %d.%.2d pF\n",
327			   atr >> 2, (atr & 0x3) * 25);
328
329	usr = isl1208_i2c_get_usr(client);
330	if (usr >= 0)
331		seq_printf(seq, "user_data\t: 0x%.4x\n", usr);
332
333	return 0;
334}
335
336static int
337isl1208_i2c_read_time(struct i2c_client *client, struct rtc_time *tm)
338{
339	int sr;
340	u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
341
342	sr = isl1208_i2c_get_sr(client);
343	if (sr < 0) {
344		dev_err(&client->dev, "%s: reading SR failed\n", __func__);
345		return -EIO;
346	}
347
348	sr = isl1208_i2c_read_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN);
349	if (sr < 0) {
350		dev_err(&client->dev, "%s: reading RTC section failed\n",
351			__func__);
352		return sr;
353	}
354
355	tm->tm_sec = bcd2bin(regs[ISL1208_REG_SC]);
356	tm->tm_min = bcd2bin(regs[ISL1208_REG_MN]);
357
358	/* HR field has a more complex interpretation */
359	{
360		const u8 _hr = regs[ISL1208_REG_HR];
361		if (_hr & ISL1208_REG_HR_MIL)	/* 24h format */
362			tm->tm_hour = bcd2bin(_hr & 0x3f);
363		else {
364			/* 12h format */
365			tm->tm_hour = bcd2bin(_hr & 0x1f);
366			if (_hr & ISL1208_REG_HR_PM)	/* PM flag set */
367				tm->tm_hour += 12;
368		}
369	}
370
371	tm->tm_mday = bcd2bin(regs[ISL1208_REG_DT]);
372	tm->tm_mon = bcd2bin(regs[ISL1208_REG_MO]) - 1;	/* rtc starts at 1 */
373	tm->tm_year = bcd2bin(regs[ISL1208_REG_YR]) + 100;
374	tm->tm_wday = bcd2bin(regs[ISL1208_REG_DW]);
375
376	return 0;
377}
378
379static int
380isl1208_i2c_read_alarm(struct i2c_client *client, struct rtc_wkalrm *alarm)
381{
382	struct rtc_time *const tm = &alarm->time;
383	u8 regs[ISL1208_ALARM_SECTION_LEN] = { 0, };
384	int icr, yr, sr = isl1208_i2c_get_sr(client);
385
386	if (sr < 0) {
387		dev_err(&client->dev, "%s: reading SR failed\n", __func__);
388		return sr;
389	}
390
391	sr = isl1208_i2c_read_regs(client, ISL1208_REG_SCA, regs,
392				   ISL1208_ALARM_SECTION_LEN);
393	if (sr < 0) {
394		dev_err(&client->dev, "%s: reading alarm section failed\n",
395			__func__);
396		return sr;
397	}
398
399	/* MSB of each alarm register is an enable bit */
400	tm->tm_sec = bcd2bin(regs[ISL1208_REG_SCA - ISL1208_REG_SCA] & 0x7f);
401	tm->tm_min = bcd2bin(regs[ISL1208_REG_MNA - ISL1208_REG_SCA] & 0x7f);
402	tm->tm_hour = bcd2bin(regs[ISL1208_REG_HRA - ISL1208_REG_SCA] & 0x3f);
403	tm->tm_mday = bcd2bin(regs[ISL1208_REG_DTA - ISL1208_REG_SCA] & 0x3f);
404	tm->tm_mon =
405		bcd2bin(regs[ISL1208_REG_MOA - ISL1208_REG_SCA] & 0x1f) - 1;
406	tm->tm_wday = bcd2bin(regs[ISL1208_REG_DWA - ISL1208_REG_SCA] & 0x03);
407
408	/* The alarm doesn't store the year so get it from the rtc section */
409	yr = i2c_smbus_read_byte_data(client, ISL1208_REG_YR);
410	if (yr < 0) {
411		dev_err(&client->dev, "%s: reading RTC YR failed\n", __func__);
412		return yr;
413	}
414	tm->tm_year = bcd2bin(yr) + 100;
415
416	icr = i2c_smbus_read_byte_data(client, ISL1208_REG_INT);
417	if (icr < 0) {
418		dev_err(&client->dev, "%s: reading INT failed\n", __func__);
419		return icr;
420	}
421	alarm->enabled = !!(icr & ISL1208_REG_INT_ALME);
422
423	return 0;
424}
425
426static int
427isl1208_i2c_set_alarm(struct i2c_client *client, struct rtc_wkalrm *alarm)
428{
429	struct rtc_time *alarm_tm = &alarm->time;
430	u8 regs[ISL1208_ALARM_SECTION_LEN] = { 0, };
431	const int offs = ISL1208_REG_SCA;
432	struct rtc_time rtc_tm;
433	int err, enable;
434
435	err = isl1208_i2c_read_time(client, &rtc_tm);
436	if (err)
437		return err;
438
439	/* If the alarm time is before the current time disable the alarm */
440	if (!alarm->enabled || rtc_tm_sub(alarm_tm, &rtc_tm) <= 0)
441		enable = 0x00;
442	else
443		enable = 0x80;
444
445	/* Program the alarm and enable it for each setting */
446	regs[ISL1208_REG_SCA - offs] = bin2bcd(alarm_tm->tm_sec) | enable;
447	regs[ISL1208_REG_MNA - offs] = bin2bcd(alarm_tm->tm_min) | enable;
448	regs[ISL1208_REG_HRA - offs] = bin2bcd(alarm_tm->tm_hour) |
449		ISL1208_REG_HR_MIL | enable;
450
451	regs[ISL1208_REG_DTA - offs] = bin2bcd(alarm_tm->tm_mday) | enable;
452	regs[ISL1208_REG_MOA - offs] = bin2bcd(alarm_tm->tm_mon + 1) | enable;
453	regs[ISL1208_REG_DWA - offs] = bin2bcd(alarm_tm->tm_wday & 7) | enable;
454
455	/* write ALARM registers */
456	err = isl1208_i2c_set_regs(client, offs, regs,
457				  ISL1208_ALARM_SECTION_LEN);
458	if (err < 0) {
459		dev_err(&client->dev, "%s: writing ALARM section failed\n",
460			__func__);
461		return err;
462	}
463
464	err = isl1208_rtc_toggle_alarm(client, enable);
465	if (err)
466		return err;
467
468	return 0;
469}
470
471static int
472isl1208_rtc_read_time(struct device *dev, struct rtc_time *tm)
473{
474	return isl1208_i2c_read_time(to_i2c_client(dev), tm);
475}
476
477static int
478isl1208_i2c_set_time(struct i2c_client *client, struct rtc_time const *tm)
479{
480	int sr;
481	u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
482
483	/* The clock has an 8 bit wide bcd-coded register (they never learn)
484	 * for the year. tm_year is an offset from 1900 and we are interested
485	 * in the 2000-2099 range, so any value less than 100 is invalid.
486	 */
487	if (tm->tm_year < 100)
488		return -EINVAL;
489
490	regs[ISL1208_REG_SC] = bin2bcd(tm->tm_sec);
491	regs[ISL1208_REG_MN] = bin2bcd(tm->tm_min);
492	regs[ISL1208_REG_HR] = bin2bcd(tm->tm_hour) | ISL1208_REG_HR_MIL;
493
494	regs[ISL1208_REG_DT] = bin2bcd(tm->tm_mday);
495	regs[ISL1208_REG_MO] = bin2bcd(tm->tm_mon + 1);
496	regs[ISL1208_REG_YR] = bin2bcd(tm->tm_year - 100);
497
498	regs[ISL1208_REG_DW] = bin2bcd(tm->tm_wday & 7);
499
500	sr = isl1208_i2c_get_sr(client);
501	if (sr < 0) {
502		dev_err(&client->dev, "%s: reading SR failed\n", __func__);
503		return sr;
504	}
505
506	/* set WRTC */
507	sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR,
508				       sr | ISL1208_REG_SR_WRTC);
509	if (sr < 0) {
510		dev_err(&client->dev, "%s: writing SR failed\n", __func__);
511		return sr;
512	}
513
514	/* write RTC registers */
515	sr = isl1208_i2c_set_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN);
516	if (sr < 0) {
517		dev_err(&client->dev, "%s: writing RTC section failed\n",
518			__func__);
519		return sr;
520	}
521
522	/* clear WRTC again */
523	sr = isl1208_i2c_get_sr(client);
524	if (sr < 0) {
525		dev_err(&client->dev, "%s: reading SR failed\n", __func__);
526		return sr;
527	}
528	sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR,
529				       sr & ~ISL1208_REG_SR_WRTC);
530	if (sr < 0) {
531		dev_err(&client->dev, "%s: writing SR failed\n", __func__);
532		return sr;
533	}
534
535	return 0;
536}
537
 
538static int
539isl1208_rtc_set_time(struct device *dev, struct rtc_time *tm)
540{
541	return isl1208_i2c_set_time(to_i2c_client(dev), tm);
542}
543
544static int
545isl1208_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
546{
547	return isl1208_i2c_read_alarm(to_i2c_client(dev), alarm);
548}
549
550static int
551isl1208_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
552{
553	return isl1208_i2c_set_alarm(to_i2c_client(dev), alarm);
554}
555
556static ssize_t timestamp0_store(struct device *dev,
557				struct device_attribute *attr,
558				const char *buf, size_t count)
559{
560	struct i2c_client *client = to_i2c_client(dev->parent);
561	int sr;
562
563	sr = isl1208_i2c_get_sr(client);
564	if (sr < 0) {
565		dev_err(dev, "%s: reading SR failed\n", __func__);
566		return sr;
567	}
568
569	sr &= ~ISL1208_REG_SR_EVT;
570
571	sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR, sr);
572	if (sr < 0)
573		dev_err(dev, "%s: writing SR failed\n",
574			__func__);
575
576	return count;
577};
578
579static ssize_t timestamp0_show(struct device *dev,
580			       struct device_attribute *attr, char *buf)
581{
582	struct i2c_client *client = to_i2c_client(dev->parent);
583	u8 regs[ISL1219_EVT_SECTION_LEN] = { 0, };
584	struct rtc_time tm;
585	int sr;
586
587	sr = isl1208_i2c_get_sr(client);
588	if (sr < 0) {
589		dev_err(dev, "%s: reading SR failed\n", __func__);
590		return sr;
591	}
592
593	if (!(sr & ISL1208_REG_SR_EVT))
594		return 0;
595
596	sr = isl1208_i2c_read_regs(client, ISL1219_REG_SCT, regs,
597				   ISL1219_EVT_SECTION_LEN);
598	if (sr < 0) {
599		dev_err(dev, "%s: reading event section failed\n",
600			__func__);
601		return 0;
602	}
603
604	/* MSB of each alarm register is an enable bit */
605	tm.tm_sec = bcd2bin(regs[ISL1219_REG_SCT - ISL1219_REG_SCT] & 0x7f);
606	tm.tm_min = bcd2bin(regs[ISL1219_REG_MNT - ISL1219_REG_SCT] & 0x7f);
607	tm.tm_hour = bcd2bin(regs[ISL1219_REG_HRT - ISL1219_REG_SCT] & 0x3f);
608	tm.tm_mday = bcd2bin(regs[ISL1219_REG_DTT - ISL1219_REG_SCT] & 0x3f);
609	tm.tm_mon =
610		bcd2bin(regs[ISL1219_REG_MOT - ISL1219_REG_SCT] & 0x1f) - 1;
611	tm.tm_year = bcd2bin(regs[ISL1219_REG_YRT - ISL1219_REG_SCT]) + 100;
612
613	sr = rtc_valid_tm(&tm);
614	if (sr)
615		return sr;
616
617	return sprintf(buf, "%llu\n",
618				(unsigned long long)rtc_tm_to_time64(&tm));
619};
620
621static DEVICE_ATTR_RW(timestamp0);
622
623static irqreturn_t
624isl1208_rtc_interrupt(int irq, void *data)
625{
626	unsigned long timeout = jiffies + msecs_to_jiffies(1000);
627	struct i2c_client *client = data;
628	struct isl1208_state *isl1208 = i2c_get_clientdata(client);
629	int handled = 0, sr, err;
630
631	/*
632	 * I2C reads get NAK'ed if we read straight away after an interrupt?
633	 * Using a mdelay/msleep didn't seem to help either, so we work around
634	 * this by continually trying to read the register for a short time.
635	 */
636	while (1) {
637		sr = isl1208_i2c_get_sr(client);
638		if (sr >= 0)
639			break;
640
641		if (time_after(jiffies, timeout)) {
642			dev_err(&client->dev, "%s: reading SR failed\n",
643				__func__);
644			return sr;
645		}
646	}
647
648	if (sr & ISL1208_REG_SR_ALM) {
649		dev_dbg(&client->dev, "alarm!\n");
650
651		rtc_update_irq(isl1208->rtc, 1, RTC_IRQF | RTC_AF);
652
653		/* Clear the alarm */
654		sr &= ~ISL1208_REG_SR_ALM;
655		sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR, sr);
656		if (sr < 0)
657			dev_err(&client->dev, "%s: writing SR failed\n",
658				__func__);
659		else
660			handled = 1;
661
662		/* Disable the alarm */
663		err = isl1208_rtc_toggle_alarm(client, 0);
664		if (err)
665			return err;
666	}
667
668	if (isl1208->config->has_tamper && (sr & ISL1208_REG_SR_EVT)) {
669		dev_warn(&client->dev, "event detected");
670		handled = 1;
671		if (isl1208->config->has_timestamp)
672			sysfs_notify(&isl1208->rtc->dev.kobj, NULL,
673				     dev_attr_timestamp0.attr.name);
674	}
675
676	return handled ? IRQ_HANDLED : IRQ_NONE;
677}
678
679static const struct rtc_class_ops isl1208_rtc_ops = {
680	.proc = isl1208_rtc_proc,
681	.read_time = isl1208_rtc_read_time,
682	.set_time = isl1208_rtc_set_time,
683	.read_alarm = isl1208_rtc_read_alarm,
684	.set_alarm = isl1208_rtc_set_alarm,
685};
686
687/* sysfs interface */
688
689static ssize_t
690isl1208_sysfs_show_atrim(struct device *dev,
691			 struct device_attribute *attr, char *buf)
692{
693	int atr = isl1208_i2c_get_atr(to_i2c_client(dev->parent));
694	if (atr < 0)
695		return atr;
696
697	return sprintf(buf, "%d.%.2d pF\n", atr >> 2, (atr & 0x3) * 25);
698}
699
700static DEVICE_ATTR(atrim, S_IRUGO, isl1208_sysfs_show_atrim, NULL);
701
702static ssize_t
703isl1208_sysfs_show_dtrim(struct device *dev,
704			 struct device_attribute *attr, char *buf)
705{
706	int dtr = isl1208_i2c_get_dtr(to_i2c_client(dev->parent));
707	if (dtr < 0)
708		return dtr;
709
710	return sprintf(buf, "%d ppm\n", dtr - 100);
711}
712
713static DEVICE_ATTR(dtrim, S_IRUGO, isl1208_sysfs_show_dtrim, NULL);
714
715static ssize_t
716isl1208_sysfs_show_usr(struct device *dev,
717		       struct device_attribute *attr, char *buf)
718{
719	int usr = isl1208_i2c_get_usr(to_i2c_client(dev->parent));
720	if (usr < 0)
721		return usr;
722
723	return sprintf(buf, "0x%.4x\n", usr);
724}
725
726static ssize_t
727isl1208_sysfs_store_usr(struct device *dev,
728			struct device_attribute *attr,
729			const char *buf, size_t count)
730{
731	int usr = -1;
732
733	if (buf[0] == '0' && (buf[1] == 'x' || buf[1] == 'X')) {
734		if (sscanf(buf, "%x", &usr) != 1)
735			return -EINVAL;
736	} else {
737		if (sscanf(buf, "%d", &usr) != 1)
738			return -EINVAL;
739	}
740
741	if (usr < 0 || usr > 0xffff)
742		return -EINVAL;
743
744	if (isl1208_i2c_set_usr(to_i2c_client(dev->parent), usr))
745		return -EIO;
746
747	return count;
748}
749
750static DEVICE_ATTR(usr, S_IRUGO | S_IWUSR, isl1208_sysfs_show_usr,
751		   isl1208_sysfs_store_usr);
752
753static struct attribute *isl1208_rtc_attrs[] = {
754	&dev_attr_atrim.attr,
755	&dev_attr_dtrim.attr,
756	&dev_attr_usr.attr,
757	NULL
758};
759
760static const struct attribute_group isl1208_rtc_sysfs_files = {
761	.attrs	= isl1208_rtc_attrs,
762};
763
764static struct attribute *isl1219_rtc_attrs[] = {
765	&dev_attr_timestamp0.attr,
766	NULL
767};
768
769static const struct attribute_group isl1219_rtc_sysfs_files = {
770	.attrs	= isl1219_rtc_attrs,
771};
772
773static int isl1208_nvmem_read(void *priv, unsigned int off, void *buf,
774			      size_t count)
775{
776	struct isl1208_state *isl1208 = priv;
777	struct i2c_client *client = to_i2c_client(isl1208->rtc->dev.parent);
778	int ret;
779
780	/* nvmem sanitizes offset/count for us, but count==0 is possible */
781	if (!count)
782		return count;
783	ret = isl1208_i2c_read_regs(client, ISL1208_REG_USR1 + off, buf,
784				    count);
785	return ret == 0 ? count : ret;
786}
787
788static int isl1208_nvmem_write(void *priv, unsigned int off, void *buf,
789			       size_t count)
790{
791	struct isl1208_state *isl1208 = priv;
792	struct i2c_client *client = to_i2c_client(isl1208->rtc->dev.parent);
793	int ret;
794
795	/* nvmem sanitizes off/count for us, but count==0 is possible */
796	if (!count)
797		return count;
798	ret = isl1208_i2c_set_regs(client, ISL1208_REG_USR1 + off, buf,
799				   count);
800
801	return ret == 0 ? count : ret;
802}
803
804static const struct nvmem_config isl1208_nvmem_config = {
805	.name = "isl1208_nvram",
806	.word_size = 1,
807	.stride = 1,
808	/* .size from chip specific config */
809	.reg_read = isl1208_nvmem_read,
810	.reg_write = isl1208_nvmem_write,
811};
812
813static int isl1208_setup_irq(struct i2c_client *client, int irq)
814{
815	int rc = devm_request_threaded_irq(&client->dev, irq, NULL,
816					isl1208_rtc_interrupt,
817					IRQF_SHARED | IRQF_ONESHOT,
818					isl1208_driver.driver.name,
819					client);
820	if (!rc) {
821		device_init_wakeup(&client->dev, 1);
822		enable_irq_wake(irq);
823	} else {
824		dev_err(&client->dev,
825			"Unable to request irq %d, no alarm support\n",
826			irq);
827	}
828	return rc;
829}
830
831static int
832isl1208_clk_present(struct i2c_client *client, const char *name)
833{
834	struct clk *clk;
835
836	clk = devm_clk_get_optional(&client->dev, name);
837	if (IS_ERR(clk))
838		return PTR_ERR(clk);
839
840	return !!clk;
841}
842
843static int
844isl1208_probe(struct i2c_client *client)
845{
846	struct isl1208_state *isl1208;
847	int evdet_irq = -1;
848	int xtosb_val = 0;
849	int rc = 0;
850	int sr;
851
852	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
853		return -ENODEV;
854
855	if (isl1208_i2c_validate_client(client) < 0)
856		return -ENODEV;
857
858	/* Allocate driver state, point i2c client data to it */
859	isl1208 = devm_kzalloc(&client->dev, sizeof(*isl1208), GFP_KERNEL);
860	if (!isl1208)
861		return -ENOMEM;
862	i2c_set_clientdata(client, isl1208);
863
864	/* Determine which chip we have */
865	isl1208->config = i2c_get_match_data(client);
866	if (!isl1208->config)
867		return -ENODEV;
868
869	rc = isl1208_clk_present(client, "xin");
870	if (rc < 0)
871		return rc;
872
873	if (!rc) {
874		rc = isl1208_clk_present(client, "clkin");
875		if (rc < 0)
876			return rc;
877
878		if (rc)
879			xtosb_val = 1;
 
 
 
 
 
 
 
 
880	}
881
882	isl1208->rtc = devm_rtc_allocate_device(&client->dev);
883	if (IS_ERR(isl1208->rtc))
884		return PTR_ERR(isl1208->rtc);
 
 
885
886	isl1208->rtc->ops = &isl1208_rtc_ops;
887
888	/* Setup nvmem configuration in driver state struct */
889	isl1208->nvmem_config = isl1208_nvmem_config;
890	isl1208->nvmem_config.size = isl1208->config->nvmem_length;
891	isl1208->nvmem_config.priv = isl1208;
892
893	sr = isl1208_i2c_get_sr(client);
894	if (sr < 0) {
895		dev_err(&client->dev, "reading status failed\n");
896		return sr;
897	}
898
899	if (isl1208->config->has_inverted_osc_bit)
900		xtosb_val = !xtosb_val;
901
902	rc = isl1208_set_xtoscb(client, sr, xtosb_val);
903	if (rc)
904		return rc;
905
906	if (sr & ISL1208_REG_SR_RTCF)
907		dev_warn(&client->dev, "rtc power failure detected, "
908			 "please set clock.\n");
909
910	if (isl1208->config->has_tamper) {
911		struct device_node *np = client->dev.of_node;
912		u32 evienb;
913
914		rc = i2c_smbus_read_byte_data(client, ISL1219_REG_EV);
915		if (rc < 0) {
916			dev_err(&client->dev, "failed to read EV reg\n");
917			return rc;
918		}
919		rc |= ISL1219_REG_EV_EVEN;
920		if (!of_property_read_u32(np, "isil,ev-evienb", &evienb)) {
921			if (evienb)
922				rc |= ISL1219_REG_EV_EVIENB;
923			else
924				rc &= ~ISL1219_REG_EV_EVIENB;
925		}
926		rc = i2c_smbus_write_byte_data(client, ISL1219_REG_EV, rc);
927		if (rc < 0) {
928			dev_err(&client->dev, "could not enable tamper detection\n");
929			return rc;
930		}
931		evdet_irq = of_irq_get_byname(np, "evdet");
932	}
933	if (isl1208->config->has_timestamp) {
934		rc = rtc_add_group(isl1208->rtc, &isl1219_rtc_sysfs_files);
935		if (rc)
936			return rc;
937	}
938
939	rc = rtc_add_group(isl1208->rtc, &isl1208_rtc_sysfs_files);
940	if (rc)
941		return rc;
942
943	if (client->irq > 0) {
944		rc = isl1208_setup_irq(client, client->irq);
945		if (rc)
946			return rc;
947	} else {
948		clear_bit(RTC_FEATURE_UPDATE_INTERRUPT, isl1208->rtc->features);
949	}
950
951	if (evdet_irq > 0 && evdet_irq != client->irq)
952		rc = isl1208_setup_irq(client, evdet_irq);
953	if (rc)
954		return rc;
955
956	rc = devm_rtc_nvmem_register(isl1208->rtc, &isl1208->nvmem_config);
957	if (rc)
958		return rc;
959
960	return devm_rtc_register_device(isl1208->rtc);
961}
 
 
 
 
962
963static struct i2c_driver isl1208_driver = {
964	.driver = {
965		.name = "rtc-isl1208",
966		.of_match_table = of_match_ptr(isl1208_of_match),
967	},
968	.probe = isl1208_probe,
 
969	.id_table = isl1208_id,
970};
971
972module_i2c_driver(isl1208_driver);
973
974MODULE_AUTHOR("Herbert Valerio Riedel <hvr@gnu.org>");
975MODULE_DESCRIPTION("Intersil ISL1208 RTC driver");
976MODULE_LICENSE("GPL");