Loading...
1/*
2 * RTC class driver for "CMOS RTC": PCs, ACPI, etc
3 *
4 * Copyright (C) 1996 Paul Gortmaker (drivers/char/rtc.c)
5 * Copyright (C) 2006 David Brownell (convert to new framework)
6 *
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License
9 * as published by the Free Software Foundation; either version
10 * 2 of the License, or (at your option) any later version.
11 */
12
13/*
14 * The original "cmos clock" chip was an MC146818 chip, now obsolete.
15 * That defined the register interface now provided by all PCs, some
16 * non-PC systems, and incorporated into ACPI. Modern PC chipsets
17 * integrate an MC146818 clone in their southbridge, and boards use
18 * that instead of discrete clones like the DS12887 or M48T86. There
19 * are also clones that connect using the LPC bus.
20 *
21 * That register API is also used directly by various other drivers
22 * (notably for integrated NVRAM), infrastructure (x86 has code to
23 * bypass the RTC framework, directly reading the RTC during boot
24 * and updating minutes/seconds for systems using NTP synch) and
25 * utilities (like userspace 'hwclock', if no /dev node exists).
26 *
27 * So **ALL** calls to CMOS_READ and CMOS_WRITE must be done with
28 * interrupts disabled, holding the global rtc_lock, to exclude those
29 * other drivers and utilities on correctly configured systems.
30 */
31
32#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
33
34#include <linux/kernel.h>
35#include <linux/module.h>
36#include <linux/init.h>
37#include <linux/interrupt.h>
38#include <linux/spinlock.h>
39#include <linux/platform_device.h>
40#include <linux/log2.h>
41#include <linux/pm.h>
42#include <linux/of.h>
43#include <linux/of_platform.h>
44
45/* this is for "generic access to PC-style RTC" using CMOS_READ/CMOS_WRITE */
46#include <asm-generic/rtc.h>
47
48struct cmos_rtc {
49 struct rtc_device *rtc;
50 struct device *dev;
51 int irq;
52 struct resource *iomem;
53 time64_t alarm_expires;
54
55 void (*wake_on)(struct device *);
56 void (*wake_off)(struct device *);
57
58 u8 enabled_wake;
59 u8 suspend_ctrl;
60
61 /* newer hardware extends the original register set */
62 u8 day_alrm;
63 u8 mon_alrm;
64 u8 century;
65};
66
67/* both platform and pnp busses use negative numbers for invalid irqs */
68#define is_valid_irq(n) ((n) > 0)
69
70static const char driver_name[] = "rtc_cmos";
71
72/* The RTC_INTR register may have e.g. RTC_PF set even if RTC_PIE is clear;
73 * always mask it against the irq enable bits in RTC_CONTROL. Bit values
74 * are the same: PF==PIE, AF=AIE, UF=UIE; so RTC_IRQMASK works with both.
75 */
76#define RTC_IRQMASK (RTC_PF | RTC_AF | RTC_UF)
77
78static inline int is_intr(u8 rtc_intr)
79{
80 if (!(rtc_intr & RTC_IRQF))
81 return 0;
82 return rtc_intr & RTC_IRQMASK;
83}
84
85/*----------------------------------------------------------------*/
86
87/* Much modern x86 hardware has HPETs (10+ MHz timers) which, because
88 * many BIOS programmers don't set up "sane mode" IRQ routing, are mostly
89 * used in a broken "legacy replacement" mode. The breakage includes
90 * HPET #1 hijacking the IRQ for this RTC, and being unavailable for
91 * other (better) use.
92 *
93 * When that broken mode is in use, platform glue provides a partial
94 * emulation of hardware RTC IRQ facilities using HPET #1. We don't
95 * want to use HPET for anything except those IRQs though...
96 */
97#ifdef CONFIG_HPET_EMULATE_RTC
98#include <asm/hpet.h>
99#else
100
101static inline int is_hpet_enabled(void)
102{
103 return 0;
104}
105
106static inline int hpet_mask_rtc_irq_bit(unsigned long mask)
107{
108 return 0;
109}
110
111static inline int hpet_set_rtc_irq_bit(unsigned long mask)
112{
113 return 0;
114}
115
116static inline int
117hpet_set_alarm_time(unsigned char hrs, unsigned char min, unsigned char sec)
118{
119 return 0;
120}
121
122static inline int hpet_set_periodic_freq(unsigned long freq)
123{
124 return 0;
125}
126
127static inline int hpet_rtc_dropped_irq(void)
128{
129 return 0;
130}
131
132static inline int hpet_rtc_timer_init(void)
133{
134 return 0;
135}
136
137extern irq_handler_t hpet_rtc_interrupt;
138
139static inline int hpet_register_irq_handler(irq_handler_t handler)
140{
141 return 0;
142}
143
144static inline int hpet_unregister_irq_handler(irq_handler_t handler)
145{
146 return 0;
147}
148
149#endif
150
151/*----------------------------------------------------------------*/
152
153#ifdef RTC_PORT
154
155/* Most newer x86 systems have two register banks, the first used
156 * for RTC and NVRAM and the second only for NVRAM. Caller must
157 * own rtc_lock ... and we won't worry about access during NMI.
158 */
159#define can_bank2 true
160
161static inline unsigned char cmos_read_bank2(unsigned char addr)
162{
163 outb(addr, RTC_PORT(2));
164 return inb(RTC_PORT(3));
165}
166
167static inline void cmos_write_bank2(unsigned char val, unsigned char addr)
168{
169 outb(addr, RTC_PORT(2));
170 outb(val, RTC_PORT(3));
171}
172
173#else
174
175#define can_bank2 false
176
177static inline unsigned char cmos_read_bank2(unsigned char addr)
178{
179 return 0;
180}
181
182static inline void cmos_write_bank2(unsigned char val, unsigned char addr)
183{
184}
185
186#endif
187
188/*----------------------------------------------------------------*/
189
190static int cmos_read_time(struct device *dev, struct rtc_time *t)
191{
192 /* REVISIT: if the clock has a "century" register, use
193 * that instead of the heuristic in get_rtc_time().
194 * That'll make Y3K compatility (year > 2070) easy!
195 */
196 get_rtc_time(t);
197 return 0;
198}
199
200static int cmos_set_time(struct device *dev, struct rtc_time *t)
201{
202 /* REVISIT: set the "century" register if available
203 *
204 * NOTE: this ignores the issue whereby updating the seconds
205 * takes effect exactly 500ms after we write the register.
206 * (Also queueing and other delays before we get this far.)
207 */
208 return set_rtc_time(t);
209}
210
211static int cmos_read_alarm(struct device *dev, struct rtc_wkalrm *t)
212{
213 struct cmos_rtc *cmos = dev_get_drvdata(dev);
214 unsigned char rtc_control;
215
216 if (!is_valid_irq(cmos->irq))
217 return -EIO;
218
219 /* Basic alarms only support hour, minute, and seconds fields.
220 * Some also support day and month, for alarms up to a year in
221 * the future.
222 */
223 t->time.tm_mday = -1;
224 t->time.tm_mon = -1;
225
226 spin_lock_irq(&rtc_lock);
227 t->time.tm_sec = CMOS_READ(RTC_SECONDS_ALARM);
228 t->time.tm_min = CMOS_READ(RTC_MINUTES_ALARM);
229 t->time.tm_hour = CMOS_READ(RTC_HOURS_ALARM);
230
231 if (cmos->day_alrm) {
232 /* ignore upper bits on readback per ACPI spec */
233 t->time.tm_mday = CMOS_READ(cmos->day_alrm) & 0x3f;
234 if (!t->time.tm_mday)
235 t->time.tm_mday = -1;
236
237 if (cmos->mon_alrm) {
238 t->time.tm_mon = CMOS_READ(cmos->mon_alrm);
239 if (!t->time.tm_mon)
240 t->time.tm_mon = -1;
241 }
242 }
243
244 rtc_control = CMOS_READ(RTC_CONTROL);
245 spin_unlock_irq(&rtc_lock);
246
247 if (!(rtc_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
248 if (((unsigned)t->time.tm_sec) < 0x60)
249 t->time.tm_sec = bcd2bin(t->time.tm_sec);
250 else
251 t->time.tm_sec = -1;
252 if (((unsigned)t->time.tm_min) < 0x60)
253 t->time.tm_min = bcd2bin(t->time.tm_min);
254 else
255 t->time.tm_min = -1;
256 if (((unsigned)t->time.tm_hour) < 0x24)
257 t->time.tm_hour = bcd2bin(t->time.tm_hour);
258 else
259 t->time.tm_hour = -1;
260
261 if (cmos->day_alrm) {
262 if (((unsigned)t->time.tm_mday) <= 0x31)
263 t->time.tm_mday = bcd2bin(t->time.tm_mday);
264 else
265 t->time.tm_mday = -1;
266
267 if (cmos->mon_alrm) {
268 if (((unsigned)t->time.tm_mon) <= 0x12)
269 t->time.tm_mon = bcd2bin(t->time.tm_mon)-1;
270 else
271 t->time.tm_mon = -1;
272 }
273 }
274 }
275 t->time.tm_year = -1;
276
277 t->enabled = !!(rtc_control & RTC_AIE);
278 t->pending = 0;
279
280 return 0;
281}
282
283static void cmos_checkintr(struct cmos_rtc *cmos, unsigned char rtc_control)
284{
285 unsigned char rtc_intr;
286
287 /* NOTE after changing RTC_xIE bits we always read INTR_FLAGS;
288 * allegedly some older rtcs need that to handle irqs properly
289 */
290 rtc_intr = CMOS_READ(RTC_INTR_FLAGS);
291
292 if (is_hpet_enabled())
293 return;
294
295 rtc_intr &= (rtc_control & RTC_IRQMASK) | RTC_IRQF;
296 if (is_intr(rtc_intr))
297 rtc_update_irq(cmos->rtc, 1, rtc_intr);
298}
299
300static void cmos_irq_enable(struct cmos_rtc *cmos, unsigned char mask)
301{
302 unsigned char rtc_control;
303
304 /* flush any pending IRQ status, notably for update irqs,
305 * before we enable new IRQs
306 */
307 rtc_control = CMOS_READ(RTC_CONTROL);
308 cmos_checkintr(cmos, rtc_control);
309
310 rtc_control |= mask;
311 CMOS_WRITE(rtc_control, RTC_CONTROL);
312 hpet_set_rtc_irq_bit(mask);
313
314 cmos_checkintr(cmos, rtc_control);
315}
316
317static void cmos_irq_disable(struct cmos_rtc *cmos, unsigned char mask)
318{
319 unsigned char rtc_control;
320
321 rtc_control = CMOS_READ(RTC_CONTROL);
322 rtc_control &= ~mask;
323 CMOS_WRITE(rtc_control, RTC_CONTROL);
324 hpet_mask_rtc_irq_bit(mask);
325
326 cmos_checkintr(cmos, rtc_control);
327}
328
329static int cmos_set_alarm(struct device *dev, struct rtc_wkalrm *t)
330{
331 struct cmos_rtc *cmos = dev_get_drvdata(dev);
332 unsigned char mon, mday, hrs, min, sec, rtc_control;
333
334 if (!is_valid_irq(cmos->irq))
335 return -EIO;
336
337 mon = t->time.tm_mon + 1;
338 mday = t->time.tm_mday;
339 hrs = t->time.tm_hour;
340 min = t->time.tm_min;
341 sec = t->time.tm_sec;
342
343 rtc_control = CMOS_READ(RTC_CONTROL);
344 if (!(rtc_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
345 /* Writing 0xff means "don't care" or "match all". */
346 mon = (mon <= 12) ? bin2bcd(mon) : 0xff;
347 mday = (mday >= 1 && mday <= 31) ? bin2bcd(mday) : 0xff;
348 hrs = (hrs < 24) ? bin2bcd(hrs) : 0xff;
349 min = (min < 60) ? bin2bcd(min) : 0xff;
350 sec = (sec < 60) ? bin2bcd(sec) : 0xff;
351 }
352
353 spin_lock_irq(&rtc_lock);
354
355 /* next rtc irq must not be from previous alarm setting */
356 cmos_irq_disable(cmos, RTC_AIE);
357
358 /* update alarm */
359 CMOS_WRITE(hrs, RTC_HOURS_ALARM);
360 CMOS_WRITE(min, RTC_MINUTES_ALARM);
361 CMOS_WRITE(sec, RTC_SECONDS_ALARM);
362
363 /* the system may support an "enhanced" alarm */
364 if (cmos->day_alrm) {
365 CMOS_WRITE(mday, cmos->day_alrm);
366 if (cmos->mon_alrm)
367 CMOS_WRITE(mon, cmos->mon_alrm);
368 }
369
370 /* FIXME the HPET alarm glue currently ignores day_alrm
371 * and mon_alrm ...
372 */
373 hpet_set_alarm_time(t->time.tm_hour, t->time.tm_min, t->time.tm_sec);
374
375 if (t->enabled)
376 cmos_irq_enable(cmos, RTC_AIE);
377
378 spin_unlock_irq(&rtc_lock);
379
380 cmos->alarm_expires = rtc_tm_to_time64(&t->time);
381
382 return 0;
383}
384
385static int cmos_alarm_irq_enable(struct device *dev, unsigned int enabled)
386{
387 struct cmos_rtc *cmos = dev_get_drvdata(dev);
388 unsigned long flags;
389
390 if (!is_valid_irq(cmos->irq))
391 return -EINVAL;
392
393 spin_lock_irqsave(&rtc_lock, flags);
394
395 if (enabled)
396 cmos_irq_enable(cmos, RTC_AIE);
397 else
398 cmos_irq_disable(cmos, RTC_AIE);
399
400 spin_unlock_irqrestore(&rtc_lock, flags);
401 return 0;
402}
403
404#if defined(CONFIG_RTC_INTF_PROC) || defined(CONFIG_RTC_INTF_PROC_MODULE)
405
406static int cmos_procfs(struct device *dev, struct seq_file *seq)
407{
408 struct cmos_rtc *cmos = dev_get_drvdata(dev);
409 unsigned char rtc_control, valid;
410
411 spin_lock_irq(&rtc_lock);
412 rtc_control = CMOS_READ(RTC_CONTROL);
413 valid = CMOS_READ(RTC_VALID);
414 spin_unlock_irq(&rtc_lock);
415
416 /* NOTE: at least ICH6 reports battery status using a different
417 * (non-RTC) bit; and SQWE is ignored on many current systems.
418 */
419 seq_printf(seq,
420 "periodic_IRQ\t: %s\n"
421 "update_IRQ\t: %s\n"
422 "HPET_emulated\t: %s\n"
423 // "square_wave\t: %s\n"
424 "BCD\t\t: %s\n"
425 "DST_enable\t: %s\n"
426 "periodic_freq\t: %d\n"
427 "batt_status\t: %s\n",
428 (rtc_control & RTC_PIE) ? "yes" : "no",
429 (rtc_control & RTC_UIE) ? "yes" : "no",
430 is_hpet_enabled() ? "yes" : "no",
431 // (rtc_control & RTC_SQWE) ? "yes" : "no",
432 (rtc_control & RTC_DM_BINARY) ? "no" : "yes",
433 (rtc_control & RTC_DST_EN) ? "yes" : "no",
434 cmos->rtc->irq_freq,
435 (valid & RTC_VRT) ? "okay" : "dead");
436
437 return 0;
438}
439
440#else
441#define cmos_procfs NULL
442#endif
443
444static const struct rtc_class_ops cmos_rtc_ops = {
445 .read_time = cmos_read_time,
446 .set_time = cmos_set_time,
447 .read_alarm = cmos_read_alarm,
448 .set_alarm = cmos_set_alarm,
449 .proc = cmos_procfs,
450 .alarm_irq_enable = cmos_alarm_irq_enable,
451};
452
453/*----------------------------------------------------------------*/
454
455/*
456 * All these chips have at least 64 bytes of address space, shared by
457 * RTC registers and NVRAM. Most of those bytes of NVRAM are used
458 * by boot firmware. Modern chips have 128 or 256 bytes.
459 */
460
461#define NVRAM_OFFSET (RTC_REG_D + 1)
462
463static ssize_t
464cmos_nvram_read(struct file *filp, struct kobject *kobj,
465 struct bin_attribute *attr,
466 char *buf, loff_t off, size_t count)
467{
468 int retval;
469
470 off += NVRAM_OFFSET;
471 spin_lock_irq(&rtc_lock);
472 for (retval = 0; count; count--, off++, retval++) {
473 if (off < 128)
474 *buf++ = CMOS_READ(off);
475 else if (can_bank2)
476 *buf++ = cmos_read_bank2(off);
477 else
478 break;
479 }
480 spin_unlock_irq(&rtc_lock);
481
482 return retval;
483}
484
485static ssize_t
486cmos_nvram_write(struct file *filp, struct kobject *kobj,
487 struct bin_attribute *attr,
488 char *buf, loff_t off, size_t count)
489{
490 struct cmos_rtc *cmos;
491 int retval;
492
493 cmos = dev_get_drvdata(container_of(kobj, struct device, kobj));
494
495 /* NOTE: on at least PCs and Ataris, the boot firmware uses a
496 * checksum on part of the NVRAM data. That's currently ignored
497 * here. If userspace is smart enough to know what fields of
498 * NVRAM to update, updating checksums is also part of its job.
499 */
500 off += NVRAM_OFFSET;
501 spin_lock_irq(&rtc_lock);
502 for (retval = 0; count; count--, off++, retval++) {
503 /* don't trash RTC registers */
504 if (off == cmos->day_alrm
505 || off == cmos->mon_alrm
506 || off == cmos->century)
507 buf++;
508 else if (off < 128)
509 CMOS_WRITE(*buf++, off);
510 else if (can_bank2)
511 cmos_write_bank2(*buf++, off);
512 else
513 break;
514 }
515 spin_unlock_irq(&rtc_lock);
516
517 return retval;
518}
519
520static struct bin_attribute nvram = {
521 .attr = {
522 .name = "nvram",
523 .mode = S_IRUGO | S_IWUSR,
524 },
525
526 .read = cmos_nvram_read,
527 .write = cmos_nvram_write,
528 /* size gets set up later */
529};
530
531/*----------------------------------------------------------------*/
532
533static struct cmos_rtc cmos_rtc;
534
535static irqreturn_t cmos_interrupt(int irq, void *p)
536{
537 u8 irqstat;
538 u8 rtc_control;
539
540 spin_lock(&rtc_lock);
541
542 /* When the HPET interrupt handler calls us, the interrupt
543 * status is passed as arg1 instead of the irq number. But
544 * always clear irq status, even when HPET is in the way.
545 *
546 * Note that HPET and RTC are almost certainly out of phase,
547 * giving different IRQ status ...
548 */
549 irqstat = CMOS_READ(RTC_INTR_FLAGS);
550 rtc_control = CMOS_READ(RTC_CONTROL);
551 if (is_hpet_enabled())
552 irqstat = (unsigned long)irq & 0xF0;
553
554 /* If we were suspended, RTC_CONTROL may not be accurate since the
555 * bios may have cleared it.
556 */
557 if (!cmos_rtc.suspend_ctrl)
558 irqstat &= (rtc_control & RTC_IRQMASK) | RTC_IRQF;
559 else
560 irqstat &= (cmos_rtc.suspend_ctrl & RTC_IRQMASK) | RTC_IRQF;
561
562 /* All Linux RTC alarms should be treated as if they were oneshot.
563 * Similar code may be needed in system wakeup paths, in case the
564 * alarm woke the system.
565 */
566 if (irqstat & RTC_AIE) {
567 cmos_rtc.suspend_ctrl &= ~RTC_AIE;
568 rtc_control &= ~RTC_AIE;
569 CMOS_WRITE(rtc_control, RTC_CONTROL);
570 hpet_mask_rtc_irq_bit(RTC_AIE);
571 CMOS_READ(RTC_INTR_FLAGS);
572 }
573 spin_unlock(&rtc_lock);
574
575 if (is_intr(irqstat)) {
576 rtc_update_irq(p, 1, irqstat);
577 return IRQ_HANDLED;
578 } else
579 return IRQ_NONE;
580}
581
582#ifdef CONFIG_PNP
583#define INITSECTION
584
585#else
586#define INITSECTION __init
587#endif
588
589static int INITSECTION
590cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq)
591{
592 struct cmos_rtc_board_info *info = dev_get_platdata(dev);
593 int retval = 0;
594 unsigned char rtc_control;
595 unsigned address_space;
596 u32 flags = 0;
597
598 /* there can be only one ... */
599 if (cmos_rtc.dev)
600 return -EBUSY;
601
602 if (!ports)
603 return -ENODEV;
604
605 /* Claim I/O ports ASAP, minimizing conflict with legacy driver.
606 *
607 * REVISIT non-x86 systems may instead use memory space resources
608 * (needing ioremap etc), not i/o space resources like this ...
609 */
610 if (RTC_IOMAPPED)
611 ports = request_region(ports->start, resource_size(ports),
612 driver_name);
613 else
614 ports = request_mem_region(ports->start, resource_size(ports),
615 driver_name);
616 if (!ports) {
617 dev_dbg(dev, "i/o registers already in use\n");
618 return -EBUSY;
619 }
620
621 cmos_rtc.irq = rtc_irq;
622 cmos_rtc.iomem = ports;
623
624 /* Heuristic to deduce NVRAM size ... do what the legacy NVRAM
625 * driver did, but don't reject unknown configs. Old hardware
626 * won't address 128 bytes. Newer chips have multiple banks,
627 * though they may not be listed in one I/O resource.
628 */
629#if defined(CONFIG_ATARI)
630 address_space = 64;
631#elif defined(__i386__) || defined(__x86_64__) || defined(__arm__) \
632 || defined(__sparc__) || defined(__mips__) \
633 || defined(__powerpc__)
634 address_space = 128;
635#else
636#warning Assuming 128 bytes of RTC+NVRAM address space, not 64 bytes.
637 address_space = 128;
638#endif
639 if (can_bank2 && ports->end > (ports->start + 1))
640 address_space = 256;
641
642 /* For ACPI systems extension info comes from the FADT. On others,
643 * board specific setup provides it as appropriate. Systems where
644 * the alarm IRQ isn't automatically a wakeup IRQ (like ACPI, and
645 * some almost-clones) can provide hooks to make that behave.
646 *
647 * Note that ACPI doesn't preclude putting these registers into
648 * "extended" areas of the chip, including some that we won't yet
649 * expect CMOS_READ and friends to handle.
650 */
651 if (info) {
652 if (info->flags)
653 flags = info->flags;
654 if (info->address_space)
655 address_space = info->address_space;
656
657 if (info->rtc_day_alarm && info->rtc_day_alarm < 128)
658 cmos_rtc.day_alrm = info->rtc_day_alarm;
659 if (info->rtc_mon_alarm && info->rtc_mon_alarm < 128)
660 cmos_rtc.mon_alrm = info->rtc_mon_alarm;
661 if (info->rtc_century && info->rtc_century < 128)
662 cmos_rtc.century = info->rtc_century;
663
664 if (info->wake_on && info->wake_off) {
665 cmos_rtc.wake_on = info->wake_on;
666 cmos_rtc.wake_off = info->wake_off;
667 }
668 }
669
670 cmos_rtc.dev = dev;
671 dev_set_drvdata(dev, &cmos_rtc);
672
673 cmos_rtc.rtc = rtc_device_register(driver_name, dev,
674 &cmos_rtc_ops, THIS_MODULE);
675 if (IS_ERR(cmos_rtc.rtc)) {
676 retval = PTR_ERR(cmos_rtc.rtc);
677 goto cleanup0;
678 }
679
680 rename_region(ports, dev_name(&cmos_rtc.rtc->dev));
681
682 spin_lock_irq(&rtc_lock);
683
684 if (!(flags & CMOS_RTC_FLAGS_NOFREQ)) {
685 /* force periodic irq to CMOS reset default of 1024Hz;
686 *
687 * REVISIT it's been reported that at least one x86_64 ALI
688 * mobo doesn't use 32KHz here ... for portability we might
689 * need to do something about other clock frequencies.
690 */
691 cmos_rtc.rtc->irq_freq = 1024;
692 hpet_set_periodic_freq(cmos_rtc.rtc->irq_freq);
693 CMOS_WRITE(RTC_REF_CLCK_32KHZ | 0x06, RTC_FREQ_SELECT);
694 }
695
696 /* disable irqs */
697 if (is_valid_irq(rtc_irq))
698 cmos_irq_disable(&cmos_rtc, RTC_PIE | RTC_AIE | RTC_UIE);
699
700 rtc_control = CMOS_READ(RTC_CONTROL);
701
702 spin_unlock_irq(&rtc_lock);
703
704 /* FIXME:
705 * <asm-generic/rtc.h> doesn't know 12-hour mode either.
706 */
707 if (is_valid_irq(rtc_irq) && !(rtc_control & RTC_24H)) {
708 dev_warn(dev, "only 24-hr supported\n");
709 retval = -ENXIO;
710 goto cleanup1;
711 }
712
713 if (is_valid_irq(rtc_irq)) {
714 irq_handler_t rtc_cmos_int_handler;
715
716 if (is_hpet_enabled()) {
717 rtc_cmos_int_handler = hpet_rtc_interrupt;
718 retval = hpet_register_irq_handler(cmos_interrupt);
719 if (retval) {
720 dev_warn(dev, "hpet_register_irq_handler "
721 " failed in rtc_init().");
722 goto cleanup1;
723 }
724 } else
725 rtc_cmos_int_handler = cmos_interrupt;
726
727 retval = request_irq(rtc_irq, rtc_cmos_int_handler,
728 IRQF_SHARED, dev_name(&cmos_rtc.rtc->dev),
729 cmos_rtc.rtc);
730 if (retval < 0) {
731 dev_dbg(dev, "IRQ %d is already in use\n", rtc_irq);
732 goto cleanup1;
733 }
734 }
735 hpet_rtc_timer_init();
736
737 /* export at least the first block of NVRAM */
738 nvram.size = address_space - NVRAM_OFFSET;
739 retval = sysfs_create_bin_file(&dev->kobj, &nvram);
740 if (retval < 0) {
741 dev_dbg(dev, "can't create nvram file? %d\n", retval);
742 goto cleanup2;
743 }
744
745 dev_info(dev, "%s%s, %zd bytes nvram%s\n",
746 !is_valid_irq(rtc_irq) ? "no alarms" :
747 cmos_rtc.mon_alrm ? "alarms up to one year" :
748 cmos_rtc.day_alrm ? "alarms up to one month" :
749 "alarms up to one day",
750 cmos_rtc.century ? ", y3k" : "",
751 nvram.size,
752 is_hpet_enabled() ? ", hpet irqs" : "");
753
754 return 0;
755
756cleanup2:
757 if (is_valid_irq(rtc_irq))
758 free_irq(rtc_irq, cmos_rtc.rtc);
759cleanup1:
760 cmos_rtc.dev = NULL;
761 rtc_device_unregister(cmos_rtc.rtc);
762cleanup0:
763 if (RTC_IOMAPPED)
764 release_region(ports->start, resource_size(ports));
765 else
766 release_mem_region(ports->start, resource_size(ports));
767 return retval;
768}
769
770static void cmos_do_shutdown(int rtc_irq)
771{
772 spin_lock_irq(&rtc_lock);
773 if (is_valid_irq(rtc_irq))
774 cmos_irq_disable(&cmos_rtc, RTC_IRQMASK);
775 spin_unlock_irq(&rtc_lock);
776}
777
778static void __exit cmos_do_remove(struct device *dev)
779{
780 struct cmos_rtc *cmos = dev_get_drvdata(dev);
781 struct resource *ports;
782
783 cmos_do_shutdown(cmos->irq);
784
785 sysfs_remove_bin_file(&dev->kobj, &nvram);
786
787 if (is_valid_irq(cmos->irq)) {
788 free_irq(cmos->irq, cmos->rtc);
789 hpet_unregister_irq_handler(cmos_interrupt);
790 }
791
792 rtc_device_unregister(cmos->rtc);
793 cmos->rtc = NULL;
794
795 ports = cmos->iomem;
796 if (RTC_IOMAPPED)
797 release_region(ports->start, resource_size(ports));
798 else
799 release_mem_region(ports->start, resource_size(ports));
800 cmos->iomem = NULL;
801
802 cmos->dev = NULL;
803}
804
805static int cmos_aie_poweroff(struct device *dev)
806{
807 struct cmos_rtc *cmos = dev_get_drvdata(dev);
808 struct rtc_time now;
809 time64_t t_now;
810 int retval = 0;
811 unsigned char rtc_control;
812
813 if (!cmos->alarm_expires)
814 return -EINVAL;
815
816 spin_lock_irq(&rtc_lock);
817 rtc_control = CMOS_READ(RTC_CONTROL);
818 spin_unlock_irq(&rtc_lock);
819
820 /* We only care about the situation where AIE is disabled. */
821 if (rtc_control & RTC_AIE)
822 return -EBUSY;
823
824 cmos_read_time(dev, &now);
825 t_now = rtc_tm_to_time64(&now);
826
827 /*
828 * When enabling "RTC wake-up" in BIOS setup, the machine reboots
829 * automatically right after shutdown on some buggy boxes.
830 * This automatic rebooting issue won't happen when the alarm
831 * time is larger than now+1 seconds.
832 *
833 * If the alarm time is equal to now+1 seconds, the issue can be
834 * prevented by cancelling the alarm.
835 */
836 if (cmos->alarm_expires == t_now + 1) {
837 struct rtc_wkalrm alarm;
838
839 /* Cancel the AIE timer by configuring the past time. */
840 rtc_time64_to_tm(t_now - 1, &alarm.time);
841 alarm.enabled = 0;
842 retval = cmos_set_alarm(dev, &alarm);
843 } else if (cmos->alarm_expires > t_now + 1) {
844 retval = -EBUSY;
845 }
846
847 return retval;
848}
849
850#ifdef CONFIG_PM
851
852static int cmos_suspend(struct device *dev)
853{
854 struct cmos_rtc *cmos = dev_get_drvdata(dev);
855 unsigned char tmp;
856
857 /* only the alarm might be a wakeup event source */
858 spin_lock_irq(&rtc_lock);
859 cmos->suspend_ctrl = tmp = CMOS_READ(RTC_CONTROL);
860 if (tmp & (RTC_PIE|RTC_AIE|RTC_UIE)) {
861 unsigned char mask;
862
863 if (device_may_wakeup(dev))
864 mask = RTC_IRQMASK & ~RTC_AIE;
865 else
866 mask = RTC_IRQMASK;
867 tmp &= ~mask;
868 CMOS_WRITE(tmp, RTC_CONTROL);
869 hpet_mask_rtc_irq_bit(mask);
870
871 cmos_checkintr(cmos, tmp);
872 }
873 spin_unlock_irq(&rtc_lock);
874
875 if (tmp & RTC_AIE) {
876 cmos->enabled_wake = 1;
877 if (cmos->wake_on)
878 cmos->wake_on(dev);
879 else
880 enable_irq_wake(cmos->irq);
881 }
882
883 dev_dbg(dev, "suspend%s, ctrl %02x\n",
884 (tmp & RTC_AIE) ? ", alarm may wake" : "",
885 tmp);
886
887 return 0;
888}
889
890/* We want RTC alarms to wake us from e.g. ACPI G2/S5 "soft off", even
891 * after a detour through G3 "mechanical off", although the ACPI spec
892 * says wakeup should only work from G1/S4 "hibernate". To most users,
893 * distinctions between S4 and S5 are pointless. So when the hardware
894 * allows, don't draw that distinction.
895 */
896static inline int cmos_poweroff(struct device *dev)
897{
898 return cmos_suspend(dev);
899}
900
901#ifdef CONFIG_PM_SLEEP
902
903static int cmos_resume(struct device *dev)
904{
905 struct cmos_rtc *cmos = dev_get_drvdata(dev);
906 unsigned char tmp;
907
908 if (cmos->enabled_wake) {
909 if (cmos->wake_off)
910 cmos->wake_off(dev);
911 else
912 disable_irq_wake(cmos->irq);
913 cmos->enabled_wake = 0;
914 }
915
916 spin_lock_irq(&rtc_lock);
917 tmp = cmos->suspend_ctrl;
918 cmos->suspend_ctrl = 0;
919 /* re-enable any irqs previously active */
920 if (tmp & RTC_IRQMASK) {
921 unsigned char mask;
922
923 if (device_may_wakeup(dev))
924 hpet_rtc_timer_init();
925
926 do {
927 CMOS_WRITE(tmp, RTC_CONTROL);
928 hpet_set_rtc_irq_bit(tmp & RTC_IRQMASK);
929
930 mask = CMOS_READ(RTC_INTR_FLAGS);
931 mask &= (tmp & RTC_IRQMASK) | RTC_IRQF;
932 if (!is_hpet_enabled() || !is_intr(mask))
933 break;
934
935 /* force one-shot behavior if HPET blocked
936 * the wake alarm's irq
937 */
938 rtc_update_irq(cmos->rtc, 1, mask);
939 tmp &= ~RTC_AIE;
940 hpet_mask_rtc_irq_bit(RTC_AIE);
941 } while (mask & RTC_AIE);
942 }
943 spin_unlock_irq(&rtc_lock);
944
945 dev_dbg(dev, "resume, ctrl %02x\n", tmp);
946
947 return 0;
948}
949
950#endif
951#else
952
953static inline int cmos_poweroff(struct device *dev)
954{
955 return -ENOSYS;
956}
957
958#endif
959
960static SIMPLE_DEV_PM_OPS(cmos_pm_ops, cmos_suspend, cmos_resume);
961
962/*----------------------------------------------------------------*/
963
964/* On non-x86 systems, a "CMOS" RTC lives most naturally on platform_bus.
965 * ACPI systems always list these as PNPACPI devices, and pre-ACPI PCs
966 * probably list them in similar PNPBIOS tables; so PNP is more common.
967 *
968 * We don't use legacy "poke at the hardware" probing. Ancient PCs that
969 * predate even PNPBIOS should set up platform_bus devices.
970 */
971
972#ifdef CONFIG_ACPI
973
974#include <linux/acpi.h>
975
976static u32 rtc_handler(void *context)
977{
978 struct device *dev = context;
979
980 pm_wakeup_event(dev, 0);
981 acpi_clear_event(ACPI_EVENT_RTC);
982 acpi_disable_event(ACPI_EVENT_RTC, 0);
983 return ACPI_INTERRUPT_HANDLED;
984}
985
986static inline void rtc_wake_setup(struct device *dev)
987{
988 acpi_install_fixed_event_handler(ACPI_EVENT_RTC, rtc_handler, dev);
989 /*
990 * After the RTC handler is installed, the Fixed_RTC event should
991 * be disabled. Only when the RTC alarm is set will it be enabled.
992 */
993 acpi_clear_event(ACPI_EVENT_RTC);
994 acpi_disable_event(ACPI_EVENT_RTC, 0);
995}
996
997static void rtc_wake_on(struct device *dev)
998{
999 acpi_clear_event(ACPI_EVENT_RTC);
1000 acpi_enable_event(ACPI_EVENT_RTC, 0);
1001}
1002
1003static void rtc_wake_off(struct device *dev)
1004{
1005 acpi_disable_event(ACPI_EVENT_RTC, 0);
1006}
1007
1008/* Every ACPI platform has a mc146818 compatible "cmos rtc". Here we find
1009 * its device node and pass extra config data. This helps its driver use
1010 * capabilities that the now-obsolete mc146818 didn't have, and informs it
1011 * that this board's RTC is wakeup-capable (per ACPI spec).
1012 */
1013static struct cmos_rtc_board_info acpi_rtc_info;
1014
1015static void cmos_wake_setup(struct device *dev)
1016{
1017 if (acpi_disabled)
1018 return;
1019
1020 rtc_wake_setup(dev);
1021 acpi_rtc_info.wake_on = rtc_wake_on;
1022 acpi_rtc_info.wake_off = rtc_wake_off;
1023
1024 /* workaround bug in some ACPI tables */
1025 if (acpi_gbl_FADT.month_alarm && !acpi_gbl_FADT.day_alarm) {
1026 dev_dbg(dev, "bogus FADT month_alarm (%d)\n",
1027 acpi_gbl_FADT.month_alarm);
1028 acpi_gbl_FADT.month_alarm = 0;
1029 }
1030
1031 acpi_rtc_info.rtc_day_alarm = acpi_gbl_FADT.day_alarm;
1032 acpi_rtc_info.rtc_mon_alarm = acpi_gbl_FADT.month_alarm;
1033 acpi_rtc_info.rtc_century = acpi_gbl_FADT.century;
1034
1035 /* NOTE: S4_RTC_WAKE is NOT currently useful to Linux */
1036 if (acpi_gbl_FADT.flags & ACPI_FADT_S4_RTC_WAKE)
1037 dev_info(dev, "RTC can wake from S4\n");
1038
1039 dev->platform_data = &acpi_rtc_info;
1040
1041 /* RTC always wakes from S1/S2/S3, and often S4/STD */
1042 device_init_wakeup(dev, 1);
1043}
1044
1045#else
1046
1047static void cmos_wake_setup(struct device *dev)
1048{
1049}
1050
1051#endif
1052
1053#ifdef CONFIG_PNP
1054
1055#include <linux/pnp.h>
1056
1057static int cmos_pnp_probe(struct pnp_dev *pnp, const struct pnp_device_id *id)
1058{
1059 cmos_wake_setup(&pnp->dev);
1060
1061 if (pnp_port_start(pnp, 0) == 0x70 && !pnp_irq_valid(pnp, 0))
1062 /* Some machines contain a PNP entry for the RTC, but
1063 * don't define the IRQ. It should always be safe to
1064 * hardcode it in these cases
1065 */
1066 return cmos_do_probe(&pnp->dev,
1067 pnp_get_resource(pnp, IORESOURCE_IO, 0), 8);
1068 else
1069 return cmos_do_probe(&pnp->dev,
1070 pnp_get_resource(pnp, IORESOURCE_IO, 0),
1071 pnp_irq(pnp, 0));
1072}
1073
1074static void __exit cmos_pnp_remove(struct pnp_dev *pnp)
1075{
1076 cmos_do_remove(&pnp->dev);
1077}
1078
1079static void cmos_pnp_shutdown(struct pnp_dev *pnp)
1080{
1081 struct device *dev = &pnp->dev;
1082 struct cmos_rtc *cmos = dev_get_drvdata(dev);
1083
1084 if (system_state == SYSTEM_POWER_OFF) {
1085 int retval = cmos_poweroff(dev);
1086
1087 if (cmos_aie_poweroff(dev) < 0 && !retval)
1088 return;
1089 }
1090
1091 cmos_do_shutdown(cmos->irq);
1092}
1093
1094static const struct pnp_device_id rtc_ids[] = {
1095 { .id = "PNP0b00", },
1096 { .id = "PNP0b01", },
1097 { .id = "PNP0b02", },
1098 { },
1099};
1100MODULE_DEVICE_TABLE(pnp, rtc_ids);
1101
1102static struct pnp_driver cmos_pnp_driver = {
1103 .name = (char *) driver_name,
1104 .id_table = rtc_ids,
1105 .probe = cmos_pnp_probe,
1106 .remove = __exit_p(cmos_pnp_remove),
1107 .shutdown = cmos_pnp_shutdown,
1108
1109 /* flag ensures resume() gets called, and stops syslog spam */
1110 .flags = PNP_DRIVER_RES_DO_NOT_CHANGE,
1111 .driver = {
1112 .pm = &cmos_pm_ops,
1113 },
1114};
1115
1116#endif /* CONFIG_PNP */
1117
1118#ifdef CONFIG_OF
1119static const struct of_device_id of_cmos_match[] = {
1120 {
1121 .compatible = "motorola,mc146818",
1122 },
1123 { },
1124};
1125MODULE_DEVICE_TABLE(of, of_cmos_match);
1126
1127static __init void cmos_of_init(struct platform_device *pdev)
1128{
1129 struct device_node *node = pdev->dev.of_node;
1130 struct rtc_time time;
1131 int ret;
1132 const __be32 *val;
1133
1134 if (!node)
1135 return;
1136
1137 val = of_get_property(node, "ctrl-reg", NULL);
1138 if (val)
1139 CMOS_WRITE(be32_to_cpup(val), RTC_CONTROL);
1140
1141 val = of_get_property(node, "freq-reg", NULL);
1142 if (val)
1143 CMOS_WRITE(be32_to_cpup(val), RTC_FREQ_SELECT);
1144
1145 get_rtc_time(&time);
1146 ret = rtc_valid_tm(&time);
1147 if (ret) {
1148 struct rtc_time def_time = {
1149 .tm_year = 1,
1150 .tm_mday = 1,
1151 };
1152 set_rtc_time(&def_time);
1153 }
1154}
1155#else
1156static inline void cmos_of_init(struct platform_device *pdev) {}
1157#endif
1158/*----------------------------------------------------------------*/
1159
1160/* Platform setup should have set up an RTC device, when PNP is
1161 * unavailable ... this could happen even on (older) PCs.
1162 */
1163
1164static int __init cmos_platform_probe(struct platform_device *pdev)
1165{
1166 struct resource *resource;
1167 int irq;
1168
1169 cmos_of_init(pdev);
1170 cmos_wake_setup(&pdev->dev);
1171
1172 if (RTC_IOMAPPED)
1173 resource = platform_get_resource(pdev, IORESOURCE_IO, 0);
1174 else
1175 resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1176 irq = platform_get_irq(pdev, 0);
1177 if (irq < 0)
1178 irq = -1;
1179
1180 return cmos_do_probe(&pdev->dev, resource, irq);
1181}
1182
1183static int __exit cmos_platform_remove(struct platform_device *pdev)
1184{
1185 cmos_do_remove(&pdev->dev);
1186 return 0;
1187}
1188
1189static void cmos_platform_shutdown(struct platform_device *pdev)
1190{
1191 struct device *dev = &pdev->dev;
1192 struct cmos_rtc *cmos = dev_get_drvdata(dev);
1193
1194 if (system_state == SYSTEM_POWER_OFF) {
1195 int retval = cmos_poweroff(dev);
1196
1197 if (cmos_aie_poweroff(dev) < 0 && !retval)
1198 return;
1199 }
1200
1201 cmos_do_shutdown(cmos->irq);
1202}
1203
1204/* work with hotplug and coldplug */
1205MODULE_ALIAS("platform:rtc_cmos");
1206
1207static struct platform_driver cmos_platform_driver = {
1208 .remove = __exit_p(cmos_platform_remove),
1209 .shutdown = cmos_platform_shutdown,
1210 .driver = {
1211 .name = driver_name,
1212#ifdef CONFIG_PM
1213 .pm = &cmos_pm_ops,
1214#endif
1215 .of_match_table = of_match_ptr(of_cmos_match),
1216 }
1217};
1218
1219#ifdef CONFIG_PNP
1220static bool pnp_driver_registered;
1221#endif
1222static bool platform_driver_registered;
1223
1224static int __init cmos_init(void)
1225{
1226 int retval = 0;
1227
1228#ifdef CONFIG_PNP
1229 retval = pnp_register_driver(&cmos_pnp_driver);
1230 if (retval == 0)
1231 pnp_driver_registered = true;
1232#endif
1233
1234 if (!cmos_rtc.dev) {
1235 retval = platform_driver_probe(&cmos_platform_driver,
1236 cmos_platform_probe);
1237 if (retval == 0)
1238 platform_driver_registered = true;
1239 }
1240
1241 if (retval == 0)
1242 return 0;
1243
1244#ifdef CONFIG_PNP
1245 if (pnp_driver_registered)
1246 pnp_unregister_driver(&cmos_pnp_driver);
1247#endif
1248 return retval;
1249}
1250module_init(cmos_init);
1251
1252static void __exit cmos_exit(void)
1253{
1254#ifdef CONFIG_PNP
1255 if (pnp_driver_registered)
1256 pnp_unregister_driver(&cmos_pnp_driver);
1257#endif
1258 if (platform_driver_registered)
1259 platform_driver_unregister(&cmos_platform_driver);
1260}
1261module_exit(cmos_exit);
1262
1263
1264MODULE_AUTHOR("David Brownell");
1265MODULE_DESCRIPTION("Driver for PC-style 'CMOS' RTCs");
1266MODULE_LICENSE("GPL");
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * RTC class driver for "CMOS RTC": PCs, ACPI, etc
4 *
5 * Copyright (C) 1996 Paul Gortmaker (drivers/char/rtc.c)
6 * Copyright (C) 2006 David Brownell (convert to new framework)
7 */
8
9/*
10 * The original "cmos clock" chip was an MC146818 chip, now obsolete.
11 * That defined the register interface now provided by all PCs, some
12 * non-PC systems, and incorporated into ACPI. Modern PC chipsets
13 * integrate an MC146818 clone in their southbridge, and boards use
14 * that instead of discrete clones like the DS12887 or M48T86. There
15 * are also clones that connect using the LPC bus.
16 *
17 * That register API is also used directly by various other drivers
18 * (notably for integrated NVRAM), infrastructure (x86 has code to
19 * bypass the RTC framework, directly reading the RTC during boot
20 * and updating minutes/seconds for systems using NTP synch) and
21 * utilities (like userspace 'hwclock', if no /dev node exists).
22 *
23 * So **ALL** calls to CMOS_READ and CMOS_WRITE must be done with
24 * interrupts disabled, holding the global rtc_lock, to exclude those
25 * other drivers and utilities on correctly configured systems.
26 */
27
28#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
29
30#include <linux/kernel.h>
31#include <linux/module.h>
32#include <linux/init.h>
33#include <linux/interrupt.h>
34#include <linux/spinlock.h>
35#include <linux/platform_device.h>
36#include <linux/log2.h>
37#include <linux/pm.h>
38#include <linux/of.h>
39#include <linux/of_platform.h>
40#ifdef CONFIG_X86
41#include <asm/i8259.h>
42#include <asm/processor.h>
43#include <linux/dmi.h>
44#endif
45
46/* this is for "generic access to PC-style RTC" using CMOS_READ/CMOS_WRITE */
47#include <linux/mc146818rtc.h>
48
49#ifdef CONFIG_ACPI
50/*
51 * Use ACPI SCI to replace HPET interrupt for RTC Alarm event
52 *
53 * If cleared, ACPI SCI is only used to wake up the system from suspend
54 *
55 * If set, ACPI SCI is used to handle UIE/AIE and system wakeup
56 */
57
58static bool use_acpi_alarm;
59module_param(use_acpi_alarm, bool, 0444);
60
61static inline int cmos_use_acpi_alarm(void)
62{
63 return use_acpi_alarm;
64}
65#else /* !CONFIG_ACPI */
66
67static inline int cmos_use_acpi_alarm(void)
68{
69 return 0;
70}
71#endif
72
73struct cmos_rtc {
74 struct rtc_device *rtc;
75 struct device *dev;
76 int irq;
77 struct resource *iomem;
78 time64_t alarm_expires;
79
80 void (*wake_on)(struct device *);
81 void (*wake_off)(struct device *);
82
83 u8 enabled_wake;
84 u8 suspend_ctrl;
85
86 /* newer hardware extends the original register set */
87 u8 day_alrm;
88 u8 mon_alrm;
89 u8 century;
90
91 struct rtc_wkalrm saved_wkalrm;
92};
93
94/* both platform and pnp busses use negative numbers for invalid irqs */
95#define is_valid_irq(n) ((n) > 0)
96
97static const char driver_name[] = "rtc_cmos";
98
99/* The RTC_INTR register may have e.g. RTC_PF set even if RTC_PIE is clear;
100 * always mask it against the irq enable bits in RTC_CONTROL. Bit values
101 * are the same: PF==PIE, AF=AIE, UF=UIE; so RTC_IRQMASK works with both.
102 */
103#define RTC_IRQMASK (RTC_PF | RTC_AF | RTC_UF)
104
105static inline int is_intr(u8 rtc_intr)
106{
107 if (!(rtc_intr & RTC_IRQF))
108 return 0;
109 return rtc_intr & RTC_IRQMASK;
110}
111
112/*----------------------------------------------------------------*/
113
114/* Much modern x86 hardware has HPETs (10+ MHz timers) which, because
115 * many BIOS programmers don't set up "sane mode" IRQ routing, are mostly
116 * used in a broken "legacy replacement" mode. The breakage includes
117 * HPET #1 hijacking the IRQ for this RTC, and being unavailable for
118 * other (better) use.
119 *
120 * When that broken mode is in use, platform glue provides a partial
121 * emulation of hardware RTC IRQ facilities using HPET #1. We don't
122 * want to use HPET for anything except those IRQs though...
123 */
124#ifdef CONFIG_HPET_EMULATE_RTC
125#include <asm/hpet.h>
126#else
127
128static inline int is_hpet_enabled(void)
129{
130 return 0;
131}
132
133static inline int hpet_mask_rtc_irq_bit(unsigned long mask)
134{
135 return 0;
136}
137
138static inline int hpet_set_rtc_irq_bit(unsigned long mask)
139{
140 return 0;
141}
142
143static inline int
144hpet_set_alarm_time(unsigned char hrs, unsigned char min, unsigned char sec)
145{
146 return 0;
147}
148
149static inline int hpet_set_periodic_freq(unsigned long freq)
150{
151 return 0;
152}
153
154static inline int hpet_rtc_dropped_irq(void)
155{
156 return 0;
157}
158
159static inline int hpet_rtc_timer_init(void)
160{
161 return 0;
162}
163
164extern irq_handler_t hpet_rtc_interrupt;
165
166static inline int hpet_register_irq_handler(irq_handler_t handler)
167{
168 return 0;
169}
170
171static inline int hpet_unregister_irq_handler(irq_handler_t handler)
172{
173 return 0;
174}
175
176#endif
177
178/* Don't use HPET for RTC Alarm event if ACPI Fixed event is used */
179static inline int use_hpet_alarm(void)
180{
181 return is_hpet_enabled() && !cmos_use_acpi_alarm();
182}
183
184/*----------------------------------------------------------------*/
185
186#ifdef RTC_PORT
187
188/* Most newer x86 systems have two register banks, the first used
189 * for RTC and NVRAM and the second only for NVRAM. Caller must
190 * own rtc_lock ... and we won't worry about access during NMI.
191 */
192#define can_bank2 true
193
194static inline unsigned char cmos_read_bank2(unsigned char addr)
195{
196 outb(addr, RTC_PORT(2));
197 return inb(RTC_PORT(3));
198}
199
200static inline void cmos_write_bank2(unsigned char val, unsigned char addr)
201{
202 outb(addr, RTC_PORT(2));
203 outb(val, RTC_PORT(3));
204}
205
206#else
207
208#define can_bank2 false
209
210static inline unsigned char cmos_read_bank2(unsigned char addr)
211{
212 return 0;
213}
214
215static inline void cmos_write_bank2(unsigned char val, unsigned char addr)
216{
217}
218
219#endif
220
221/*----------------------------------------------------------------*/
222
223static int cmos_read_time(struct device *dev, struct rtc_time *t)
224{
225 int ret;
226
227 /*
228 * If pm_trace abused the RTC for storage, set the timespec to 0,
229 * which tells the caller that this RTC value is unusable.
230 */
231 if (!pm_trace_rtc_valid())
232 return -EIO;
233
234 ret = mc146818_get_time(t, 1000);
235 if (ret < 0) {
236 dev_err_ratelimited(dev, "unable to read current time\n");
237 return ret;
238 }
239
240 return 0;
241}
242
243static int cmos_set_time(struct device *dev, struct rtc_time *t)
244{
245 /* NOTE: this ignores the issue whereby updating the seconds
246 * takes effect exactly 500ms after we write the register.
247 * (Also queueing and other delays before we get this far.)
248 */
249 return mc146818_set_time(t);
250}
251
252struct cmos_read_alarm_callback_param {
253 struct cmos_rtc *cmos;
254 struct rtc_time *time;
255 unsigned char rtc_control;
256};
257
258static void cmos_read_alarm_callback(unsigned char __always_unused seconds,
259 void *param_in)
260{
261 struct cmos_read_alarm_callback_param *p =
262 (struct cmos_read_alarm_callback_param *)param_in;
263 struct rtc_time *time = p->time;
264
265 time->tm_sec = CMOS_READ(RTC_SECONDS_ALARM);
266 time->tm_min = CMOS_READ(RTC_MINUTES_ALARM);
267 time->tm_hour = CMOS_READ(RTC_HOURS_ALARM);
268
269 if (p->cmos->day_alrm) {
270 /* ignore upper bits on readback per ACPI spec */
271 time->tm_mday = CMOS_READ(p->cmos->day_alrm) & 0x3f;
272 if (!time->tm_mday)
273 time->tm_mday = -1;
274
275 if (p->cmos->mon_alrm) {
276 time->tm_mon = CMOS_READ(p->cmos->mon_alrm);
277 if (!time->tm_mon)
278 time->tm_mon = -1;
279 }
280 }
281
282 p->rtc_control = CMOS_READ(RTC_CONTROL);
283}
284
285static int cmos_read_alarm(struct device *dev, struct rtc_wkalrm *t)
286{
287 struct cmos_rtc *cmos = dev_get_drvdata(dev);
288 struct cmos_read_alarm_callback_param p = {
289 .cmos = cmos,
290 .time = &t->time,
291 };
292
293 /* This not only a rtc_op, but also called directly */
294 if (!is_valid_irq(cmos->irq))
295 return -ETIMEDOUT;
296
297 /* Basic alarms only support hour, minute, and seconds fields.
298 * Some also support day and month, for alarms up to a year in
299 * the future.
300 */
301
302 /* Some Intel chipsets disconnect the alarm registers when the clock
303 * update is in progress - during this time reads return bogus values
304 * and writes may fail silently. See for example "7th Generation Intel®
305 * Processor Family I/O for U/Y Platforms [...] Datasheet", section
306 * 27.7.1
307 *
308 * Use the mc146818_avoid_UIP() function to avoid this.
309 */
310 if (!mc146818_avoid_UIP(cmos_read_alarm_callback, 10, &p))
311 return -EIO;
312
313 if (!(p.rtc_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
314 if (((unsigned)t->time.tm_sec) < 0x60)
315 t->time.tm_sec = bcd2bin(t->time.tm_sec);
316 else
317 t->time.tm_sec = -1;
318 if (((unsigned)t->time.tm_min) < 0x60)
319 t->time.tm_min = bcd2bin(t->time.tm_min);
320 else
321 t->time.tm_min = -1;
322 if (((unsigned)t->time.tm_hour) < 0x24)
323 t->time.tm_hour = bcd2bin(t->time.tm_hour);
324 else
325 t->time.tm_hour = -1;
326
327 if (cmos->day_alrm) {
328 if (((unsigned)t->time.tm_mday) <= 0x31)
329 t->time.tm_mday = bcd2bin(t->time.tm_mday);
330 else
331 t->time.tm_mday = -1;
332
333 if (cmos->mon_alrm) {
334 if (((unsigned)t->time.tm_mon) <= 0x12)
335 t->time.tm_mon = bcd2bin(t->time.tm_mon)-1;
336 else
337 t->time.tm_mon = -1;
338 }
339 }
340 }
341
342 t->enabled = !!(p.rtc_control & RTC_AIE);
343 t->pending = 0;
344
345 return 0;
346}
347
348static void cmos_checkintr(struct cmos_rtc *cmos, unsigned char rtc_control)
349{
350 unsigned char rtc_intr;
351
352 /* NOTE after changing RTC_xIE bits we always read INTR_FLAGS;
353 * allegedly some older rtcs need that to handle irqs properly
354 */
355 rtc_intr = CMOS_READ(RTC_INTR_FLAGS);
356
357 if (use_hpet_alarm())
358 return;
359
360 rtc_intr &= (rtc_control & RTC_IRQMASK) | RTC_IRQF;
361 if (is_intr(rtc_intr))
362 rtc_update_irq(cmos->rtc, 1, rtc_intr);
363}
364
365static void cmos_irq_enable(struct cmos_rtc *cmos, unsigned char mask)
366{
367 unsigned char rtc_control;
368
369 /* flush any pending IRQ status, notably for update irqs,
370 * before we enable new IRQs
371 */
372 rtc_control = CMOS_READ(RTC_CONTROL);
373 cmos_checkintr(cmos, rtc_control);
374
375 rtc_control |= mask;
376 CMOS_WRITE(rtc_control, RTC_CONTROL);
377 if (use_hpet_alarm())
378 hpet_set_rtc_irq_bit(mask);
379
380 if ((mask & RTC_AIE) && cmos_use_acpi_alarm()) {
381 if (cmos->wake_on)
382 cmos->wake_on(cmos->dev);
383 }
384
385 cmos_checkintr(cmos, rtc_control);
386}
387
388static void cmos_irq_disable(struct cmos_rtc *cmos, unsigned char mask)
389{
390 unsigned char rtc_control;
391
392 rtc_control = CMOS_READ(RTC_CONTROL);
393 rtc_control &= ~mask;
394 CMOS_WRITE(rtc_control, RTC_CONTROL);
395 if (use_hpet_alarm())
396 hpet_mask_rtc_irq_bit(mask);
397
398 if ((mask & RTC_AIE) && cmos_use_acpi_alarm()) {
399 if (cmos->wake_off)
400 cmos->wake_off(cmos->dev);
401 }
402
403 cmos_checkintr(cmos, rtc_control);
404}
405
406static int cmos_validate_alarm(struct device *dev, struct rtc_wkalrm *t)
407{
408 struct cmos_rtc *cmos = dev_get_drvdata(dev);
409 struct rtc_time now;
410
411 cmos_read_time(dev, &now);
412
413 if (!cmos->day_alrm) {
414 time64_t t_max_date;
415 time64_t t_alrm;
416
417 t_max_date = rtc_tm_to_time64(&now);
418 t_max_date += 24 * 60 * 60 - 1;
419 t_alrm = rtc_tm_to_time64(&t->time);
420 if (t_alrm > t_max_date) {
421 dev_err(dev,
422 "Alarms can be up to one day in the future\n");
423 return -EINVAL;
424 }
425 } else if (!cmos->mon_alrm) {
426 struct rtc_time max_date = now;
427 time64_t t_max_date;
428 time64_t t_alrm;
429 int max_mday;
430
431 if (max_date.tm_mon == 11) {
432 max_date.tm_mon = 0;
433 max_date.tm_year += 1;
434 } else {
435 max_date.tm_mon += 1;
436 }
437 max_mday = rtc_month_days(max_date.tm_mon, max_date.tm_year);
438 if (max_date.tm_mday > max_mday)
439 max_date.tm_mday = max_mday;
440
441 t_max_date = rtc_tm_to_time64(&max_date);
442 t_max_date -= 1;
443 t_alrm = rtc_tm_to_time64(&t->time);
444 if (t_alrm > t_max_date) {
445 dev_err(dev,
446 "Alarms can be up to one month in the future\n");
447 return -EINVAL;
448 }
449 } else {
450 struct rtc_time max_date = now;
451 time64_t t_max_date;
452 time64_t t_alrm;
453 int max_mday;
454
455 max_date.tm_year += 1;
456 max_mday = rtc_month_days(max_date.tm_mon, max_date.tm_year);
457 if (max_date.tm_mday > max_mday)
458 max_date.tm_mday = max_mday;
459
460 t_max_date = rtc_tm_to_time64(&max_date);
461 t_max_date -= 1;
462 t_alrm = rtc_tm_to_time64(&t->time);
463 if (t_alrm > t_max_date) {
464 dev_err(dev,
465 "Alarms can be up to one year in the future\n");
466 return -EINVAL;
467 }
468 }
469
470 return 0;
471}
472
473struct cmos_set_alarm_callback_param {
474 struct cmos_rtc *cmos;
475 unsigned char mon, mday, hrs, min, sec;
476 struct rtc_wkalrm *t;
477};
478
479/* Note: this function may be executed by mc146818_avoid_UIP() more then
480 * once
481 */
482static void cmos_set_alarm_callback(unsigned char __always_unused seconds,
483 void *param_in)
484{
485 struct cmos_set_alarm_callback_param *p =
486 (struct cmos_set_alarm_callback_param *)param_in;
487
488 /* next rtc irq must not be from previous alarm setting */
489 cmos_irq_disable(p->cmos, RTC_AIE);
490
491 /* update alarm */
492 CMOS_WRITE(p->hrs, RTC_HOURS_ALARM);
493 CMOS_WRITE(p->min, RTC_MINUTES_ALARM);
494 CMOS_WRITE(p->sec, RTC_SECONDS_ALARM);
495
496 /* the system may support an "enhanced" alarm */
497 if (p->cmos->day_alrm) {
498 CMOS_WRITE(p->mday, p->cmos->day_alrm);
499 if (p->cmos->mon_alrm)
500 CMOS_WRITE(p->mon, p->cmos->mon_alrm);
501 }
502
503 if (use_hpet_alarm()) {
504 /*
505 * FIXME the HPET alarm glue currently ignores day_alrm
506 * and mon_alrm ...
507 */
508 hpet_set_alarm_time(p->t->time.tm_hour, p->t->time.tm_min,
509 p->t->time.tm_sec);
510 }
511
512 if (p->t->enabled)
513 cmos_irq_enable(p->cmos, RTC_AIE);
514}
515
516static int cmos_set_alarm(struct device *dev, struct rtc_wkalrm *t)
517{
518 struct cmos_rtc *cmos = dev_get_drvdata(dev);
519 struct cmos_set_alarm_callback_param p = {
520 .cmos = cmos,
521 .t = t
522 };
523 unsigned char rtc_control;
524 int ret;
525
526 /* This not only a rtc_op, but also called directly */
527 if (!is_valid_irq(cmos->irq))
528 return -EIO;
529
530 ret = cmos_validate_alarm(dev, t);
531 if (ret < 0)
532 return ret;
533
534 p.mon = t->time.tm_mon + 1;
535 p.mday = t->time.tm_mday;
536 p.hrs = t->time.tm_hour;
537 p.min = t->time.tm_min;
538 p.sec = t->time.tm_sec;
539
540 spin_lock_irq(&rtc_lock);
541 rtc_control = CMOS_READ(RTC_CONTROL);
542 spin_unlock_irq(&rtc_lock);
543
544 if (!(rtc_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
545 /* Writing 0xff means "don't care" or "match all". */
546 p.mon = (p.mon <= 12) ? bin2bcd(p.mon) : 0xff;
547 p.mday = (p.mday >= 1 && p.mday <= 31) ? bin2bcd(p.mday) : 0xff;
548 p.hrs = (p.hrs < 24) ? bin2bcd(p.hrs) : 0xff;
549 p.min = (p.min < 60) ? bin2bcd(p.min) : 0xff;
550 p.sec = (p.sec < 60) ? bin2bcd(p.sec) : 0xff;
551 }
552
553 /*
554 * Some Intel chipsets disconnect the alarm registers when the clock
555 * update is in progress - during this time writes fail silently.
556 *
557 * Use mc146818_avoid_UIP() to avoid this.
558 */
559 if (!mc146818_avoid_UIP(cmos_set_alarm_callback, 10, &p))
560 return -ETIMEDOUT;
561
562 cmos->alarm_expires = rtc_tm_to_time64(&t->time);
563
564 return 0;
565}
566
567static int cmos_alarm_irq_enable(struct device *dev, unsigned int enabled)
568{
569 struct cmos_rtc *cmos = dev_get_drvdata(dev);
570 unsigned long flags;
571
572 spin_lock_irqsave(&rtc_lock, flags);
573
574 if (enabled)
575 cmos_irq_enable(cmos, RTC_AIE);
576 else
577 cmos_irq_disable(cmos, RTC_AIE);
578
579 spin_unlock_irqrestore(&rtc_lock, flags);
580 return 0;
581}
582
583#if IS_ENABLED(CONFIG_RTC_INTF_PROC)
584
585static int cmos_procfs(struct device *dev, struct seq_file *seq)
586{
587 struct cmos_rtc *cmos = dev_get_drvdata(dev);
588 unsigned char rtc_control, valid;
589
590 spin_lock_irq(&rtc_lock);
591 rtc_control = CMOS_READ(RTC_CONTROL);
592 valid = CMOS_READ(RTC_VALID);
593 spin_unlock_irq(&rtc_lock);
594
595 /* NOTE: at least ICH6 reports battery status using a different
596 * (non-RTC) bit; and SQWE is ignored on many current systems.
597 */
598 seq_printf(seq,
599 "periodic_IRQ\t: %s\n"
600 "update_IRQ\t: %s\n"
601 "HPET_emulated\t: %s\n"
602 // "square_wave\t: %s\n"
603 "BCD\t\t: %s\n"
604 "DST_enable\t: %s\n"
605 "periodic_freq\t: %d\n"
606 "batt_status\t: %s\n",
607 (rtc_control & RTC_PIE) ? "yes" : "no",
608 (rtc_control & RTC_UIE) ? "yes" : "no",
609 use_hpet_alarm() ? "yes" : "no",
610 // (rtc_control & RTC_SQWE) ? "yes" : "no",
611 (rtc_control & RTC_DM_BINARY) ? "no" : "yes",
612 (rtc_control & RTC_DST_EN) ? "yes" : "no",
613 cmos->rtc->irq_freq,
614 (valid & RTC_VRT) ? "okay" : "dead");
615
616 return 0;
617}
618
619#else
620#define cmos_procfs NULL
621#endif
622
623static const struct rtc_class_ops cmos_rtc_ops = {
624 .read_time = cmos_read_time,
625 .set_time = cmos_set_time,
626 .read_alarm = cmos_read_alarm,
627 .set_alarm = cmos_set_alarm,
628 .proc = cmos_procfs,
629 .alarm_irq_enable = cmos_alarm_irq_enable,
630};
631
632/*----------------------------------------------------------------*/
633
634/*
635 * All these chips have at least 64 bytes of address space, shared by
636 * RTC registers and NVRAM. Most of those bytes of NVRAM are used
637 * by boot firmware. Modern chips have 128 or 256 bytes.
638 */
639
640#define NVRAM_OFFSET (RTC_REG_D + 1)
641
642static int cmos_nvram_read(void *priv, unsigned int off, void *val,
643 size_t count)
644{
645 unsigned char *buf = val;
646
647 off += NVRAM_OFFSET;
648 for (; count; count--, off++, buf++) {
649 guard(spinlock_irq)(&rtc_lock);
650 if (off < 128)
651 *buf = CMOS_READ(off);
652 else if (can_bank2)
653 *buf = cmos_read_bank2(off);
654 else
655 return -EIO;
656 }
657
658 return 0;
659}
660
661static int cmos_nvram_write(void *priv, unsigned int off, void *val,
662 size_t count)
663{
664 struct cmos_rtc *cmos = priv;
665 unsigned char *buf = val;
666
667 /* NOTE: on at least PCs and Ataris, the boot firmware uses a
668 * checksum on part of the NVRAM data. That's currently ignored
669 * here. If userspace is smart enough to know what fields of
670 * NVRAM to update, updating checksums is also part of its job.
671 */
672 off += NVRAM_OFFSET;
673 for (; count; count--, off++, buf++) {
674 /* don't trash RTC registers */
675 if (off == cmos->day_alrm
676 || off == cmos->mon_alrm
677 || off == cmos->century)
678 continue;
679
680 guard(spinlock_irq)(&rtc_lock);
681 if (off < 128)
682 CMOS_WRITE(*buf, off);
683 else if (can_bank2)
684 cmos_write_bank2(*buf, off);
685 else
686 return -EIO;
687 }
688
689 return 0;
690}
691
692/*----------------------------------------------------------------*/
693
694static struct cmos_rtc cmos_rtc;
695
696static irqreturn_t cmos_interrupt(int irq, void *p)
697{
698 u8 irqstat;
699 u8 rtc_control;
700
701 spin_lock(&rtc_lock);
702
703 /* When the HPET interrupt handler calls us, the interrupt
704 * status is passed as arg1 instead of the irq number. But
705 * always clear irq status, even when HPET is in the way.
706 *
707 * Note that HPET and RTC are almost certainly out of phase,
708 * giving different IRQ status ...
709 */
710 irqstat = CMOS_READ(RTC_INTR_FLAGS);
711 rtc_control = CMOS_READ(RTC_CONTROL);
712 if (use_hpet_alarm())
713 irqstat = (unsigned long)irq & 0xF0;
714
715 /* If we were suspended, RTC_CONTROL may not be accurate since the
716 * bios may have cleared it.
717 */
718 if (!cmos_rtc.suspend_ctrl)
719 irqstat &= (rtc_control & RTC_IRQMASK) | RTC_IRQF;
720 else
721 irqstat &= (cmos_rtc.suspend_ctrl & RTC_IRQMASK) | RTC_IRQF;
722
723 /* All Linux RTC alarms should be treated as if they were oneshot.
724 * Similar code may be needed in system wakeup paths, in case the
725 * alarm woke the system.
726 */
727 if (irqstat & RTC_AIE) {
728 cmos_rtc.suspend_ctrl &= ~RTC_AIE;
729 rtc_control &= ~RTC_AIE;
730 CMOS_WRITE(rtc_control, RTC_CONTROL);
731 if (use_hpet_alarm())
732 hpet_mask_rtc_irq_bit(RTC_AIE);
733 CMOS_READ(RTC_INTR_FLAGS);
734 }
735 spin_unlock(&rtc_lock);
736
737 if (is_intr(irqstat)) {
738 rtc_update_irq(p, 1, irqstat);
739 return IRQ_HANDLED;
740 } else
741 return IRQ_NONE;
742}
743
744#ifdef CONFIG_ACPI
745
746#include <linux/acpi.h>
747
748static u32 rtc_handler(void *context)
749{
750 struct device *dev = context;
751 struct cmos_rtc *cmos = dev_get_drvdata(dev);
752 unsigned char rtc_control = 0;
753 unsigned char rtc_intr;
754 unsigned long flags;
755
756
757 /*
758 * Always update rtc irq when ACPI is used as RTC Alarm.
759 * Or else, ACPI SCI is enabled during suspend/resume only,
760 * update rtc irq in that case.
761 */
762 if (cmos_use_acpi_alarm())
763 cmos_interrupt(0, (void *)cmos->rtc);
764 else {
765 /* Fix me: can we use cmos_interrupt() here as well? */
766 spin_lock_irqsave(&rtc_lock, flags);
767 if (cmos_rtc.suspend_ctrl)
768 rtc_control = CMOS_READ(RTC_CONTROL);
769 if (rtc_control & RTC_AIE) {
770 cmos_rtc.suspend_ctrl &= ~RTC_AIE;
771 CMOS_WRITE(rtc_control, RTC_CONTROL);
772 rtc_intr = CMOS_READ(RTC_INTR_FLAGS);
773 rtc_update_irq(cmos->rtc, 1, rtc_intr);
774 }
775 spin_unlock_irqrestore(&rtc_lock, flags);
776 }
777
778 pm_wakeup_hard_event(dev);
779 acpi_clear_event(ACPI_EVENT_RTC);
780 acpi_disable_event(ACPI_EVENT_RTC, 0);
781 return ACPI_INTERRUPT_HANDLED;
782}
783
784static void acpi_rtc_event_setup(struct device *dev)
785{
786 if (acpi_disabled)
787 return;
788
789 acpi_install_fixed_event_handler(ACPI_EVENT_RTC, rtc_handler, dev);
790 /*
791 * After the RTC handler is installed, the Fixed_RTC event should
792 * be disabled. Only when the RTC alarm is set will it be enabled.
793 */
794 acpi_clear_event(ACPI_EVENT_RTC);
795 acpi_disable_event(ACPI_EVENT_RTC, 0);
796}
797
798static void acpi_rtc_event_cleanup(void)
799{
800 if (acpi_disabled)
801 return;
802
803 acpi_remove_fixed_event_handler(ACPI_EVENT_RTC, rtc_handler);
804}
805
806static void rtc_wake_on(struct device *dev)
807{
808 acpi_clear_event(ACPI_EVENT_RTC);
809 acpi_enable_event(ACPI_EVENT_RTC, 0);
810}
811
812static void rtc_wake_off(struct device *dev)
813{
814 acpi_disable_event(ACPI_EVENT_RTC, 0);
815}
816
817#ifdef CONFIG_X86
818static void use_acpi_alarm_quirks(void)
819{
820 switch (boot_cpu_data.x86_vendor) {
821 case X86_VENDOR_INTEL:
822 if (dmi_get_bios_year() < 2015)
823 return;
824 break;
825 case X86_VENDOR_AMD:
826 case X86_VENDOR_HYGON:
827 if (dmi_get_bios_year() < 2021)
828 return;
829 break;
830 default:
831 return;
832 }
833 if (!is_hpet_enabled())
834 return;
835
836 use_acpi_alarm = true;
837}
838#else
839static inline void use_acpi_alarm_quirks(void) { }
840#endif
841
842static void acpi_cmos_wake_setup(struct device *dev)
843{
844 if (acpi_disabled)
845 return;
846
847 use_acpi_alarm_quirks();
848
849 cmos_rtc.wake_on = rtc_wake_on;
850 cmos_rtc.wake_off = rtc_wake_off;
851
852 /* ACPI tables bug workaround. */
853 if (acpi_gbl_FADT.month_alarm && !acpi_gbl_FADT.day_alarm) {
854 dev_dbg(dev, "bogus FADT month_alarm (%d)\n",
855 acpi_gbl_FADT.month_alarm);
856 acpi_gbl_FADT.month_alarm = 0;
857 }
858
859 cmos_rtc.day_alrm = acpi_gbl_FADT.day_alarm;
860 cmos_rtc.mon_alrm = acpi_gbl_FADT.month_alarm;
861 cmos_rtc.century = acpi_gbl_FADT.century;
862
863 if (acpi_gbl_FADT.flags & ACPI_FADT_S4_RTC_WAKE)
864 dev_info(dev, "RTC can wake from S4\n");
865
866 /* RTC always wakes from S1/S2/S3, and often S4/STD */
867 device_init_wakeup(dev, 1);
868}
869
870static void cmos_check_acpi_rtc_status(struct device *dev,
871 unsigned char *rtc_control)
872{
873 struct cmos_rtc *cmos = dev_get_drvdata(dev);
874 acpi_event_status rtc_status;
875 acpi_status status;
876
877 if (acpi_gbl_FADT.flags & ACPI_FADT_FIXED_RTC)
878 return;
879
880 status = acpi_get_event_status(ACPI_EVENT_RTC, &rtc_status);
881 if (ACPI_FAILURE(status)) {
882 dev_err(dev, "Could not get RTC status\n");
883 } else if (rtc_status & ACPI_EVENT_FLAG_SET) {
884 unsigned char mask;
885 *rtc_control &= ~RTC_AIE;
886 CMOS_WRITE(*rtc_control, RTC_CONTROL);
887 mask = CMOS_READ(RTC_INTR_FLAGS);
888 rtc_update_irq(cmos->rtc, 1, mask);
889 }
890}
891
892#else /* !CONFIG_ACPI */
893
894static inline void acpi_rtc_event_setup(struct device *dev)
895{
896}
897
898static inline void acpi_rtc_event_cleanup(void)
899{
900}
901
902static inline void acpi_cmos_wake_setup(struct device *dev)
903{
904}
905
906static inline void cmos_check_acpi_rtc_status(struct device *dev,
907 unsigned char *rtc_control)
908{
909}
910#endif /* CONFIG_ACPI */
911
912#ifdef CONFIG_PNP
913#define INITSECTION
914
915#else
916#define INITSECTION __init
917#endif
918
919#define SECS_PER_DAY (24 * 60 * 60)
920#define SECS_PER_MONTH (28 * SECS_PER_DAY)
921#define SECS_PER_YEAR (365 * SECS_PER_DAY)
922
923static int INITSECTION
924cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq)
925{
926 struct cmos_rtc_board_info *info = dev_get_platdata(dev);
927 int retval = 0;
928 unsigned char rtc_control;
929 unsigned address_space;
930 u32 flags = 0;
931 struct nvmem_config nvmem_cfg = {
932 .name = "cmos_nvram",
933 .word_size = 1,
934 .stride = 1,
935 .reg_read = cmos_nvram_read,
936 .reg_write = cmos_nvram_write,
937 .priv = &cmos_rtc,
938 };
939
940 /* there can be only one ... */
941 if (cmos_rtc.dev)
942 return -EBUSY;
943
944 if (!ports)
945 return -ENODEV;
946
947 /* Claim I/O ports ASAP, minimizing conflict with legacy driver.
948 *
949 * REVISIT non-x86 systems may instead use memory space resources
950 * (needing ioremap etc), not i/o space resources like this ...
951 */
952 if (RTC_IOMAPPED)
953 ports = request_region(ports->start, resource_size(ports),
954 driver_name);
955 else
956 ports = request_mem_region(ports->start, resource_size(ports),
957 driver_name);
958 if (!ports) {
959 dev_dbg(dev, "i/o registers already in use\n");
960 return -EBUSY;
961 }
962
963 cmos_rtc.irq = rtc_irq;
964 cmos_rtc.iomem = ports;
965
966 /* Heuristic to deduce NVRAM size ... do what the legacy NVRAM
967 * driver did, but don't reject unknown configs. Old hardware
968 * won't address 128 bytes. Newer chips have multiple banks,
969 * though they may not be listed in one I/O resource.
970 */
971#if defined(CONFIG_ATARI)
972 address_space = 64;
973#elif defined(__i386__) || defined(__x86_64__) || defined(__arm__) \
974 || defined(__sparc__) || defined(__mips__) \
975 || defined(__powerpc__)
976 address_space = 128;
977#else
978#warning Assuming 128 bytes of RTC+NVRAM address space, not 64 bytes.
979 address_space = 128;
980#endif
981 if (can_bank2 && ports->end > (ports->start + 1))
982 address_space = 256;
983
984 /* For ACPI systems extension info comes from the FADT. On others,
985 * board specific setup provides it as appropriate. Systems where
986 * the alarm IRQ isn't automatically a wakeup IRQ (like ACPI, and
987 * some almost-clones) can provide hooks to make that behave.
988 *
989 * Note that ACPI doesn't preclude putting these registers into
990 * "extended" areas of the chip, including some that we won't yet
991 * expect CMOS_READ and friends to handle.
992 */
993 if (info) {
994 if (info->flags)
995 flags = info->flags;
996 if (info->address_space)
997 address_space = info->address_space;
998
999 cmos_rtc.day_alrm = info->rtc_day_alarm;
1000 cmos_rtc.mon_alrm = info->rtc_mon_alarm;
1001 cmos_rtc.century = info->rtc_century;
1002
1003 if (info->wake_on && info->wake_off) {
1004 cmos_rtc.wake_on = info->wake_on;
1005 cmos_rtc.wake_off = info->wake_off;
1006 }
1007 } else {
1008 acpi_cmos_wake_setup(dev);
1009 }
1010
1011 if (cmos_rtc.day_alrm >= 128)
1012 cmos_rtc.day_alrm = 0;
1013
1014 if (cmos_rtc.mon_alrm >= 128)
1015 cmos_rtc.mon_alrm = 0;
1016
1017 if (cmos_rtc.century >= 128)
1018 cmos_rtc.century = 0;
1019
1020 cmos_rtc.dev = dev;
1021 dev_set_drvdata(dev, &cmos_rtc);
1022
1023 cmos_rtc.rtc = devm_rtc_allocate_device(dev);
1024 if (IS_ERR(cmos_rtc.rtc)) {
1025 retval = PTR_ERR(cmos_rtc.rtc);
1026 goto cleanup0;
1027 }
1028
1029 if (cmos_rtc.mon_alrm)
1030 cmos_rtc.rtc->alarm_offset_max = SECS_PER_YEAR - 1;
1031 else if (cmos_rtc.day_alrm)
1032 cmos_rtc.rtc->alarm_offset_max = SECS_PER_MONTH - 1;
1033 else
1034 cmos_rtc.rtc->alarm_offset_max = SECS_PER_DAY - 1;
1035
1036 rename_region(ports, dev_name(&cmos_rtc.rtc->dev));
1037
1038 if (!mc146818_does_rtc_work()) {
1039 dev_warn(dev, "broken or not accessible\n");
1040 retval = -ENXIO;
1041 goto cleanup1;
1042 }
1043
1044 spin_lock_irq(&rtc_lock);
1045
1046 if (!(flags & CMOS_RTC_FLAGS_NOFREQ)) {
1047 /* force periodic irq to CMOS reset default of 1024Hz;
1048 *
1049 * REVISIT it's been reported that at least one x86_64 ALI
1050 * mobo doesn't use 32KHz here ... for portability we might
1051 * need to do something about other clock frequencies.
1052 */
1053 cmos_rtc.rtc->irq_freq = 1024;
1054 if (use_hpet_alarm())
1055 hpet_set_periodic_freq(cmos_rtc.rtc->irq_freq);
1056 CMOS_WRITE(RTC_REF_CLCK_32KHZ | 0x06, RTC_FREQ_SELECT);
1057 }
1058
1059 /* disable irqs */
1060 if (is_valid_irq(rtc_irq))
1061 cmos_irq_disable(&cmos_rtc, RTC_PIE | RTC_AIE | RTC_UIE);
1062
1063 rtc_control = CMOS_READ(RTC_CONTROL);
1064
1065 spin_unlock_irq(&rtc_lock);
1066
1067 if (is_valid_irq(rtc_irq) && !(rtc_control & RTC_24H)) {
1068 dev_warn(dev, "only 24-hr supported\n");
1069 retval = -ENXIO;
1070 goto cleanup1;
1071 }
1072
1073 if (use_hpet_alarm())
1074 hpet_rtc_timer_init();
1075
1076 if (is_valid_irq(rtc_irq)) {
1077 irq_handler_t rtc_cmos_int_handler;
1078
1079 if (use_hpet_alarm()) {
1080 rtc_cmos_int_handler = hpet_rtc_interrupt;
1081 retval = hpet_register_irq_handler(cmos_interrupt);
1082 if (retval) {
1083 hpet_mask_rtc_irq_bit(RTC_IRQMASK);
1084 dev_warn(dev, "hpet_register_irq_handler "
1085 " failed in rtc_init().");
1086 goto cleanup1;
1087 }
1088 } else
1089 rtc_cmos_int_handler = cmos_interrupt;
1090
1091 retval = request_irq(rtc_irq, rtc_cmos_int_handler,
1092 0, dev_name(&cmos_rtc.rtc->dev),
1093 cmos_rtc.rtc);
1094 if (retval < 0) {
1095 dev_dbg(dev, "IRQ %d is already in use\n", rtc_irq);
1096 goto cleanup1;
1097 }
1098 } else {
1099 clear_bit(RTC_FEATURE_ALARM, cmos_rtc.rtc->features);
1100 }
1101
1102 cmos_rtc.rtc->ops = &cmos_rtc_ops;
1103
1104 retval = devm_rtc_register_device(cmos_rtc.rtc);
1105 if (retval)
1106 goto cleanup2;
1107
1108 /* Set the sync offset for the periodic 11min update correct */
1109 cmos_rtc.rtc->set_offset_nsec = NSEC_PER_SEC / 2;
1110
1111 /* export at least the first block of NVRAM */
1112 nvmem_cfg.size = address_space - NVRAM_OFFSET;
1113 devm_rtc_nvmem_register(cmos_rtc.rtc, &nvmem_cfg);
1114
1115 /*
1116 * Everything has gone well so far, so by default register a handler for
1117 * the ACPI RTC fixed event.
1118 */
1119 if (!info)
1120 acpi_rtc_event_setup(dev);
1121
1122 dev_info(dev, "%s%s, %d bytes nvram%s\n",
1123 !is_valid_irq(rtc_irq) ? "no alarms" :
1124 cmos_rtc.mon_alrm ? "alarms up to one year" :
1125 cmos_rtc.day_alrm ? "alarms up to one month" :
1126 "alarms up to one day",
1127 cmos_rtc.century ? ", y3k" : "",
1128 nvmem_cfg.size,
1129 use_hpet_alarm() ? ", hpet irqs" : "");
1130
1131 return 0;
1132
1133cleanup2:
1134 if (is_valid_irq(rtc_irq))
1135 free_irq(rtc_irq, cmos_rtc.rtc);
1136cleanup1:
1137 cmos_rtc.dev = NULL;
1138cleanup0:
1139 if (RTC_IOMAPPED)
1140 release_region(ports->start, resource_size(ports));
1141 else
1142 release_mem_region(ports->start, resource_size(ports));
1143 return retval;
1144}
1145
1146static void cmos_do_shutdown(int rtc_irq)
1147{
1148 spin_lock_irq(&rtc_lock);
1149 if (is_valid_irq(rtc_irq))
1150 cmos_irq_disable(&cmos_rtc, RTC_IRQMASK);
1151 spin_unlock_irq(&rtc_lock);
1152}
1153
1154static void cmos_do_remove(struct device *dev)
1155{
1156 struct cmos_rtc *cmos = dev_get_drvdata(dev);
1157 struct resource *ports;
1158
1159 cmos_do_shutdown(cmos->irq);
1160
1161 if (is_valid_irq(cmos->irq)) {
1162 free_irq(cmos->irq, cmos->rtc);
1163 if (use_hpet_alarm())
1164 hpet_unregister_irq_handler(cmos_interrupt);
1165 }
1166
1167 if (!dev_get_platdata(dev))
1168 acpi_rtc_event_cleanup();
1169
1170 cmos->rtc = NULL;
1171
1172 ports = cmos->iomem;
1173 if (RTC_IOMAPPED)
1174 release_region(ports->start, resource_size(ports));
1175 else
1176 release_mem_region(ports->start, resource_size(ports));
1177 cmos->iomem = NULL;
1178
1179 cmos->dev = NULL;
1180}
1181
1182static int cmos_aie_poweroff(struct device *dev)
1183{
1184 struct cmos_rtc *cmos = dev_get_drvdata(dev);
1185 struct rtc_time now;
1186 time64_t t_now;
1187 int retval = 0;
1188 unsigned char rtc_control;
1189
1190 if (!cmos->alarm_expires)
1191 return -EINVAL;
1192
1193 spin_lock_irq(&rtc_lock);
1194 rtc_control = CMOS_READ(RTC_CONTROL);
1195 spin_unlock_irq(&rtc_lock);
1196
1197 /* We only care about the situation where AIE is disabled. */
1198 if (rtc_control & RTC_AIE)
1199 return -EBUSY;
1200
1201 cmos_read_time(dev, &now);
1202 t_now = rtc_tm_to_time64(&now);
1203
1204 /*
1205 * When enabling "RTC wake-up" in BIOS setup, the machine reboots
1206 * automatically right after shutdown on some buggy boxes.
1207 * This automatic rebooting issue won't happen when the alarm
1208 * time is larger than now+1 seconds.
1209 *
1210 * If the alarm time is equal to now+1 seconds, the issue can be
1211 * prevented by cancelling the alarm.
1212 */
1213 if (cmos->alarm_expires == t_now + 1) {
1214 struct rtc_wkalrm alarm;
1215
1216 /* Cancel the AIE timer by configuring the past time. */
1217 rtc_time64_to_tm(t_now - 1, &alarm.time);
1218 alarm.enabled = 0;
1219 retval = cmos_set_alarm(dev, &alarm);
1220 } else if (cmos->alarm_expires > t_now + 1) {
1221 retval = -EBUSY;
1222 }
1223
1224 return retval;
1225}
1226
1227static int cmos_suspend(struct device *dev)
1228{
1229 struct cmos_rtc *cmos = dev_get_drvdata(dev);
1230 unsigned char tmp;
1231
1232 /* only the alarm might be a wakeup event source */
1233 spin_lock_irq(&rtc_lock);
1234 cmos->suspend_ctrl = tmp = CMOS_READ(RTC_CONTROL);
1235 if (tmp & (RTC_PIE|RTC_AIE|RTC_UIE)) {
1236 unsigned char mask;
1237
1238 if (device_may_wakeup(dev))
1239 mask = RTC_IRQMASK & ~RTC_AIE;
1240 else
1241 mask = RTC_IRQMASK;
1242 tmp &= ~mask;
1243 CMOS_WRITE(tmp, RTC_CONTROL);
1244 if (use_hpet_alarm())
1245 hpet_mask_rtc_irq_bit(mask);
1246 cmos_checkintr(cmos, tmp);
1247 }
1248 spin_unlock_irq(&rtc_lock);
1249
1250 if ((tmp & RTC_AIE) && !cmos_use_acpi_alarm()) {
1251 cmos->enabled_wake = 1;
1252 if (cmos->wake_on)
1253 cmos->wake_on(dev);
1254 else
1255 enable_irq_wake(cmos->irq);
1256 }
1257
1258 memset(&cmos->saved_wkalrm, 0, sizeof(struct rtc_wkalrm));
1259 cmos_read_alarm(dev, &cmos->saved_wkalrm);
1260
1261 dev_dbg(dev, "suspend%s, ctrl %02x\n",
1262 (tmp & RTC_AIE) ? ", alarm may wake" : "",
1263 tmp);
1264
1265 return 0;
1266}
1267
1268/* We want RTC alarms to wake us from e.g. ACPI G2/S5 "soft off", even
1269 * after a detour through G3 "mechanical off", although the ACPI spec
1270 * says wakeup should only work from G1/S4 "hibernate". To most users,
1271 * distinctions between S4 and S5 are pointless. So when the hardware
1272 * allows, don't draw that distinction.
1273 */
1274static inline int cmos_poweroff(struct device *dev)
1275{
1276 if (!IS_ENABLED(CONFIG_PM))
1277 return -ENOSYS;
1278
1279 return cmos_suspend(dev);
1280}
1281
1282static void cmos_check_wkalrm(struct device *dev)
1283{
1284 struct cmos_rtc *cmos = dev_get_drvdata(dev);
1285 struct rtc_wkalrm current_alarm;
1286 time64_t t_now;
1287 time64_t t_current_expires;
1288 time64_t t_saved_expires;
1289 struct rtc_time now;
1290
1291 /* Check if we have RTC Alarm armed */
1292 if (!(cmos->suspend_ctrl & RTC_AIE))
1293 return;
1294
1295 cmos_read_time(dev, &now);
1296 t_now = rtc_tm_to_time64(&now);
1297
1298 /*
1299 * ACPI RTC wake event is cleared after resume from STR,
1300 * ACK the rtc irq here
1301 */
1302 if (t_now >= cmos->alarm_expires && cmos_use_acpi_alarm()) {
1303 local_irq_disable();
1304 cmos_interrupt(0, (void *)cmos->rtc);
1305 local_irq_enable();
1306 return;
1307 }
1308
1309 memset(¤t_alarm, 0, sizeof(struct rtc_wkalrm));
1310 cmos_read_alarm(dev, ¤t_alarm);
1311 t_current_expires = rtc_tm_to_time64(¤t_alarm.time);
1312 t_saved_expires = rtc_tm_to_time64(&cmos->saved_wkalrm.time);
1313 if (t_current_expires != t_saved_expires ||
1314 cmos->saved_wkalrm.enabled != current_alarm.enabled) {
1315 cmos_set_alarm(dev, &cmos->saved_wkalrm);
1316 }
1317}
1318
1319static int __maybe_unused cmos_resume(struct device *dev)
1320{
1321 struct cmos_rtc *cmos = dev_get_drvdata(dev);
1322 unsigned char tmp;
1323
1324 if (cmos->enabled_wake && !cmos_use_acpi_alarm()) {
1325 if (cmos->wake_off)
1326 cmos->wake_off(dev);
1327 else
1328 disable_irq_wake(cmos->irq);
1329 cmos->enabled_wake = 0;
1330 }
1331
1332 /* The BIOS might have changed the alarm, restore it */
1333 cmos_check_wkalrm(dev);
1334
1335 spin_lock_irq(&rtc_lock);
1336 tmp = cmos->suspend_ctrl;
1337 cmos->suspend_ctrl = 0;
1338 /* re-enable any irqs previously active */
1339 if (tmp & RTC_IRQMASK) {
1340 unsigned char mask;
1341
1342 if (device_may_wakeup(dev) && use_hpet_alarm())
1343 hpet_rtc_timer_init();
1344
1345 do {
1346 CMOS_WRITE(tmp, RTC_CONTROL);
1347 if (use_hpet_alarm())
1348 hpet_set_rtc_irq_bit(tmp & RTC_IRQMASK);
1349
1350 mask = CMOS_READ(RTC_INTR_FLAGS);
1351 mask &= (tmp & RTC_IRQMASK) | RTC_IRQF;
1352 if (!use_hpet_alarm() || !is_intr(mask))
1353 break;
1354
1355 /* force one-shot behavior if HPET blocked
1356 * the wake alarm's irq
1357 */
1358 rtc_update_irq(cmos->rtc, 1, mask);
1359 tmp &= ~RTC_AIE;
1360 hpet_mask_rtc_irq_bit(RTC_AIE);
1361 } while (mask & RTC_AIE);
1362
1363 if (tmp & RTC_AIE)
1364 cmos_check_acpi_rtc_status(dev, &tmp);
1365 }
1366 spin_unlock_irq(&rtc_lock);
1367
1368 dev_dbg(dev, "resume, ctrl %02x\n", tmp);
1369
1370 return 0;
1371}
1372
1373static SIMPLE_DEV_PM_OPS(cmos_pm_ops, cmos_suspend, cmos_resume);
1374
1375/*----------------------------------------------------------------*/
1376
1377/* On non-x86 systems, a "CMOS" RTC lives most naturally on platform_bus.
1378 * ACPI systems always list these as PNPACPI devices, and pre-ACPI PCs
1379 * probably list them in similar PNPBIOS tables; so PNP is more common.
1380 *
1381 * We don't use legacy "poke at the hardware" probing. Ancient PCs that
1382 * predate even PNPBIOS should set up platform_bus devices.
1383 */
1384
1385#ifdef CONFIG_PNP
1386
1387#include <linux/pnp.h>
1388
1389static int cmos_pnp_probe(struct pnp_dev *pnp, const struct pnp_device_id *id)
1390{
1391 int irq;
1392
1393 if (pnp_port_start(pnp, 0) == 0x70 && !pnp_irq_valid(pnp, 0)) {
1394 irq = 0;
1395#ifdef CONFIG_X86
1396 /* Some machines contain a PNP entry for the RTC, but
1397 * don't define the IRQ. It should always be safe to
1398 * hardcode it on systems with a legacy PIC.
1399 */
1400 if (nr_legacy_irqs())
1401 irq = RTC_IRQ;
1402#endif
1403 } else {
1404 irq = pnp_irq(pnp, 0);
1405 }
1406
1407 return cmos_do_probe(&pnp->dev, pnp_get_resource(pnp, IORESOURCE_IO, 0), irq);
1408}
1409
1410static void cmos_pnp_remove(struct pnp_dev *pnp)
1411{
1412 cmos_do_remove(&pnp->dev);
1413}
1414
1415static void cmos_pnp_shutdown(struct pnp_dev *pnp)
1416{
1417 struct device *dev = &pnp->dev;
1418 struct cmos_rtc *cmos = dev_get_drvdata(dev);
1419
1420 if (system_state == SYSTEM_POWER_OFF) {
1421 int retval = cmos_poweroff(dev);
1422
1423 if (cmos_aie_poweroff(dev) < 0 && !retval)
1424 return;
1425 }
1426
1427 cmos_do_shutdown(cmos->irq);
1428}
1429
1430static const struct pnp_device_id rtc_ids[] = {
1431 { .id = "PNP0b00", },
1432 { .id = "PNP0b01", },
1433 { .id = "PNP0b02", },
1434 { },
1435};
1436MODULE_DEVICE_TABLE(pnp, rtc_ids);
1437
1438static struct pnp_driver cmos_pnp_driver = {
1439 .name = driver_name,
1440 .id_table = rtc_ids,
1441 .probe = cmos_pnp_probe,
1442 .remove = cmos_pnp_remove,
1443 .shutdown = cmos_pnp_shutdown,
1444
1445 /* flag ensures resume() gets called, and stops syslog spam */
1446 .flags = PNP_DRIVER_RES_DO_NOT_CHANGE,
1447 .driver = {
1448 .pm = &cmos_pm_ops,
1449 },
1450};
1451
1452#endif /* CONFIG_PNP */
1453
1454#ifdef CONFIG_OF
1455static const struct of_device_id of_cmos_match[] = {
1456 {
1457 .compatible = "motorola,mc146818",
1458 },
1459 { },
1460};
1461MODULE_DEVICE_TABLE(of, of_cmos_match);
1462
1463static __init void cmos_of_init(struct platform_device *pdev)
1464{
1465 struct device_node *node = pdev->dev.of_node;
1466 const __be32 *val;
1467
1468 if (!node)
1469 return;
1470
1471 val = of_get_property(node, "ctrl-reg", NULL);
1472 if (val)
1473 CMOS_WRITE(be32_to_cpup(val), RTC_CONTROL);
1474
1475 val = of_get_property(node, "freq-reg", NULL);
1476 if (val)
1477 CMOS_WRITE(be32_to_cpup(val), RTC_FREQ_SELECT);
1478}
1479#else
1480static inline void cmos_of_init(struct platform_device *pdev) {}
1481#endif
1482/*----------------------------------------------------------------*/
1483
1484/* Platform setup should have set up an RTC device, when PNP is
1485 * unavailable ... this could happen even on (older) PCs.
1486 */
1487
1488static int __init cmos_platform_probe(struct platform_device *pdev)
1489{
1490 struct resource *resource;
1491 int irq;
1492
1493 cmos_of_init(pdev);
1494
1495 if (RTC_IOMAPPED)
1496 resource = platform_get_resource(pdev, IORESOURCE_IO, 0);
1497 else
1498 resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1499 irq = platform_get_irq(pdev, 0);
1500 if (irq < 0)
1501 irq = -1;
1502
1503 return cmos_do_probe(&pdev->dev, resource, irq);
1504}
1505
1506static void cmos_platform_remove(struct platform_device *pdev)
1507{
1508 cmos_do_remove(&pdev->dev);
1509}
1510
1511static void cmos_platform_shutdown(struct platform_device *pdev)
1512{
1513 struct device *dev = &pdev->dev;
1514 struct cmos_rtc *cmos = dev_get_drvdata(dev);
1515
1516 if (system_state == SYSTEM_POWER_OFF) {
1517 int retval = cmos_poweroff(dev);
1518
1519 if (cmos_aie_poweroff(dev) < 0 && !retval)
1520 return;
1521 }
1522
1523 cmos_do_shutdown(cmos->irq);
1524}
1525
1526/* work with hotplug and coldplug */
1527MODULE_ALIAS("platform:rtc_cmos");
1528
1529static struct platform_driver cmos_platform_driver = {
1530 .remove = cmos_platform_remove,
1531 .shutdown = cmos_platform_shutdown,
1532 .driver = {
1533 .name = driver_name,
1534 .pm = &cmos_pm_ops,
1535 .of_match_table = of_match_ptr(of_cmos_match),
1536 }
1537};
1538
1539#ifdef CONFIG_PNP
1540static bool pnp_driver_registered;
1541#endif
1542static bool platform_driver_registered;
1543
1544static int __init cmos_init(void)
1545{
1546 int retval = 0;
1547
1548#ifdef CONFIG_PNP
1549 retval = pnp_register_driver(&cmos_pnp_driver);
1550 if (retval == 0)
1551 pnp_driver_registered = true;
1552#endif
1553
1554 if (!cmos_rtc.dev) {
1555 retval = platform_driver_probe(&cmos_platform_driver,
1556 cmos_platform_probe);
1557 if (retval == 0)
1558 platform_driver_registered = true;
1559 }
1560
1561 if (retval == 0)
1562 return 0;
1563
1564#ifdef CONFIG_PNP
1565 if (pnp_driver_registered)
1566 pnp_unregister_driver(&cmos_pnp_driver);
1567#endif
1568 return retval;
1569}
1570module_init(cmos_init);
1571
1572static void __exit cmos_exit(void)
1573{
1574#ifdef CONFIG_PNP
1575 if (pnp_driver_registered)
1576 pnp_unregister_driver(&cmos_pnp_driver);
1577#endif
1578 if (platform_driver_registered)
1579 platform_driver_unregister(&cmos_platform_driver);
1580}
1581module_exit(cmos_exit);
1582
1583
1584MODULE_AUTHOR("David Brownell");
1585MODULE_DESCRIPTION("Driver for PC-style 'CMOS' RTCs");
1586MODULE_LICENSE("GPL");