Linux Audio

Check our new training course

Loading...
v4.6
 
  1/*
  2 * Copyright (C) 2012 Texas Instruments
  3 * Author: Rob Clark <robdclark@gmail.com>
  4 *
  5 * This program is free software; you can redistribute it and/or modify it
  6 * under the terms of the GNU General Public License version 2 as published by
  7 * the Free Software Foundation.
  8 *
  9 * This program is distributed in the hope that it will be useful, but WITHOUT
 10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 11 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 12 * more details.
 13 *
 14 * You should have received a copy of the GNU General Public License along with
 15 * this program.  If not, see <http://www.gnu.org/licenses/>.
 16 */
 17
 18#ifndef __TILCDC_DRV_H__
 19#define __TILCDC_DRV_H__
 20
 21#include <linux/clk.h>
 22#include <linux/cpufreq.h>
 23#include <linux/module.h>
 24#include <linux/platform_device.h>
 25#include <linux/pm.h>
 26#include <linux/pm_runtime.h>
 27#include <linux/slab.h>
 28#include <linux/of.h>
 29#include <linux/of_device.h>
 30#include <linux/list.h>
 31
 32#include <drm/drmP.h>
 33#include <drm/drm_crtc_helper.h>
 34#include <drm/drm_gem_cma_helper.h>
 35#include <drm/drm_fb_cma_helper.h>
 
 
 
 
 36
 37/* Defaulting to pixel clock defined on AM335x */
 38#define TILCDC_DEFAULT_MAX_PIXELCLOCK  126000
 39/* Defaulting to max width as defined on AM335x */
 40#define TILCDC_DEFAULT_MAX_WIDTH  2048
 
 
 41/*
 42 * This may need some tweaking, but want to allow at least 1280x1024@60
 43 * with optimized DDR & EMIF settings tweaked 1920x1080@24 appears to
 44 * be supportable
 45 */
 46#define TILCDC_DEFAULT_MAX_BANDWIDTH  (1280*1024*60)
 47
 48
 49struct tilcdc_drm_private {
 50	void __iomem *mmio;
 51
 52	struct clk *clk;         /* functional clock */
 53	int rev;                 /* IP revision */
 54
 
 
 55	/* don't attempt resolutions w/ higher W * H * Hz: */
 56	uint32_t max_bandwidth;
 57	/*
 58	 * Pixel Clock will be restricted to some value as
 59	 * defined in the device datasheet measured in KHz
 60	 */
 61	uint32_t max_pixelclock;
 62	/*
 63	 * Max allowable width is limited on a per device basis
 64	 * measured in pixels
 65	 */
 66	uint32_t max_width;
 67
 68	/* register contents saved across suspend/resume: */
 69	u32 *saved_register;
 70	bool ctx_valid;
 71
 72#ifdef CONFIG_CPU_FREQ
 73	struct notifier_block freq_transition;
 74	unsigned int lcd_fck_rate;
 75#endif
 76
 77	struct workqueue_struct *wq;
 78
 79	struct drm_fbdev_cma *fbdev;
 80
 81	struct drm_crtc *crtc;
 82
 83	unsigned int num_encoders;
 84	struct drm_encoder *encoders[8];
 85
 86	unsigned int num_connectors;
 87	struct drm_connector *connectors[8];
 88	const struct drm_connector_helper_funcs *connector_funcs[8];
 89
 
 
 
 
 90	bool is_componentized;
 
 91};
 92
 93/* Sub-module for display.  Since we don't know at compile time what panels
 94 * or display adapter(s) might be present (for ex, off chip dvi/tfp410,
 95 * hdmi encoder, various lcd panels), the connector/encoder(s) are split into
 96 * separate drivers.  If they are probed and found to be present, they
 97 * register themselves with tilcdc_register_module().
 98 */
 99struct tilcdc_module;
100
101struct tilcdc_module_ops {
102	/* create appropriate encoders/connectors: */
103	int (*modeset_init)(struct tilcdc_module *mod, struct drm_device *dev);
104#ifdef CONFIG_DEBUG_FS
105	/* create debugfs nodes (can be NULL): */
106	int (*debugfs_init)(struct tilcdc_module *mod, struct drm_minor *minor);
107	/* cleanup debugfs nodes (can be NULL): */
108	void (*debugfs_cleanup)(struct tilcdc_module *mod, struct drm_minor *minor);
109#endif
110};
111
112struct tilcdc_module {
113	const char *name;
114	struct list_head list;
115	const struct tilcdc_module_ops *funcs;
116	unsigned int preferred_bpp;
117};
118
119void tilcdc_module_init(struct tilcdc_module *mod, const char *name,
120		const struct tilcdc_module_ops *funcs);
121void tilcdc_module_cleanup(struct tilcdc_module *mod);
122
123/* Panel config that needs to be set in the crtc, but is not coming from
124 * the mode timings.  The display module is expected to call
125 * tilcdc_crtc_set_panel_info() to set this during modeset.
126 */
127struct tilcdc_panel_info {
128
129	/* AC Bias Pin Frequency */
130	uint32_t ac_bias;
131
132	/* AC Bias Pin Transitions per Interrupt */
133	uint32_t ac_bias_intrpt;
134
135	/* DMA burst size */
136	uint32_t dma_burst_sz;
137
138	/* Bits per pixel */
139	uint32_t bpp;
140
141	/* FIFO DMA Request Delay */
142	uint32_t fdd;
143
144	/* TFT Alternative Signal Mapping (Only for active) */
145	bool tft_alt_mode;
146
147	/* Invert pixel clock */
148	bool invert_pxl_clk;
149
150	/* Horizontal and Vertical Sync Edge: 0=rising 1=falling */
151	uint32_t sync_edge;
152
153	/* Horizontal and Vertical Sync: Control: 0=ignore */
154	uint32_t sync_ctrl;
155
156	/* Raster Data Order Select: 1=Most-to-least 0=Least-to-most */
157	uint32_t raster_order;
158
159	/* DMA FIFO threshold */
160	uint32_t fifo_th;
161};
162
163#define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__)
164
165struct drm_crtc *tilcdc_crtc_create(struct drm_device *dev);
166irqreturn_t tilcdc_crtc_irq(struct drm_crtc *crtc);
167void tilcdc_crtc_update_clk(struct drm_crtc *crtc);
168void tilcdc_crtc_set_panel_info(struct drm_crtc *crtc,
169		const struct tilcdc_panel_info *info);
170void tilcdc_crtc_set_simulate_vesa_sync(struct drm_crtc *crtc,
171					bool simulate_vesa_sync);
172int tilcdc_crtc_mode_valid(struct drm_crtc *crtc, struct drm_display_mode *mode);
173int tilcdc_crtc_max_width(struct drm_crtc *crtc);
174void tilcdc_crtc_dpms(struct drm_crtc *crtc, int mode);
 
 
 
175
176#endif /* __TILCDC_DRV_H__ */
v6.13.7
  1/* SPDX-License-Identifier: GPL-2.0-only */
  2/*
  3 * Copyright (C) 2012 Texas Instruments
  4 * Author: Rob Clark <robdclark@gmail.com>
 
 
 
 
 
 
 
 
 
 
 
 
  5 */
  6
  7#ifndef __TILCDC_DRV_H__
  8#define __TILCDC_DRV_H__
  9
 
 10#include <linux/cpufreq.h>
 11#include <linux/irqreturn.h>
 12
 13#include <drm/drm_print.h>
 14
 15struct clk;
 16struct workqueue_struct;
 17
 18struct drm_connector;
 19struct drm_connector_helper_funcs;
 20struct drm_crtc;
 21struct drm_device;
 22struct drm_display_mode;
 23struct drm_encoder;
 24struct drm_framebuffer;
 25struct drm_minor;
 26struct drm_pending_vblank_event;
 27struct drm_plane;
 28
 29/* Defaulting to pixel clock defined on AM335x */
 30#define TILCDC_DEFAULT_MAX_PIXELCLOCK  126000
 31/* Maximum display width for LCDC V1 */
 32#define TILCDC_DEFAULT_MAX_WIDTH_V1  1024
 33/* ... and for LCDC V2 found on AM335x: */
 34#define TILCDC_DEFAULT_MAX_WIDTH_V2  2048
 35/*
 36 * This may need some tweaking, but want to allow at least 1280x1024@60
 37 * with optimized DDR & EMIF settings tweaked 1920x1080@24 appears to
 38 * be supportable
 39 */
 40#define TILCDC_DEFAULT_MAX_BANDWIDTH  (1280*1024*60)
 41
 42
 43struct tilcdc_drm_private {
 44	void __iomem *mmio;
 45
 46	struct clk *clk;         /* functional clock */
 47	int rev;                 /* IP revision */
 48
 49	unsigned int irq;
 50
 51	/* don't attempt resolutions w/ higher W * H * Hz: */
 52	uint32_t max_bandwidth;
 53	/*
 54	 * Pixel Clock will be restricted to some value as
 55	 * defined in the device datasheet measured in KHz
 56	 */
 57	uint32_t max_pixelclock;
 58	/*
 59	 * Max allowable width is limited on a per device basis
 60	 * measured in pixels
 61	 */
 62	uint32_t max_width;
 63
 64	/* Supported pixel formats */
 65	const uint32_t *pixelformats;
 66	uint32_t num_pixelformats;
 67
 68#ifdef CONFIG_CPU_FREQ
 69	struct notifier_block freq_transition;
 
 70#endif
 71
 72	struct workqueue_struct *wq;
 73
 
 
 74	struct drm_crtc *crtc;
 75
 76	unsigned int num_encoders;
 77	struct drm_encoder *encoders[8];
 78
 79	unsigned int num_connectors;
 80	struct drm_connector *connectors[8];
 
 81
 82	struct drm_encoder *external_encoder;
 83	struct drm_connector *external_connector;
 84
 85	bool is_registered;
 86	bool is_componentized;
 87	bool irq_enabled;
 88};
 89
 90/* Sub-module for display.  Since we don't know at compile time what panels
 91 * or display adapter(s) might be present (for ex, off chip dvi/tfp410,
 92 * hdmi encoder, various lcd panels), the connector/encoder(s) are split into
 93 * separate drivers.  If they are probed and found to be present, they
 94 * register themselves with tilcdc_register_module().
 95 */
 96struct tilcdc_module;
 97
 98struct tilcdc_module_ops {
 99	/* create appropriate encoders/connectors: */
100	int (*modeset_init)(struct tilcdc_module *mod, struct drm_device *dev);
101#ifdef CONFIG_DEBUG_FS
102	/* create debugfs nodes (can be NULL): */
103	int (*debugfs_init)(struct tilcdc_module *mod, struct drm_minor *minor);
 
 
104#endif
105};
106
107struct tilcdc_module {
108	const char *name;
109	struct list_head list;
110	const struct tilcdc_module_ops *funcs;
 
111};
112
113void tilcdc_module_init(struct tilcdc_module *mod, const char *name,
114		const struct tilcdc_module_ops *funcs);
115void tilcdc_module_cleanup(struct tilcdc_module *mod);
116
117/* Panel config that needs to be set in the crtc, but is not coming from
118 * the mode timings.  The display module is expected to call
119 * tilcdc_crtc_set_panel_info() to set this during modeset.
120 */
121struct tilcdc_panel_info {
122
123	/* AC Bias Pin Frequency */
124	uint32_t ac_bias;
125
126	/* AC Bias Pin Transitions per Interrupt */
127	uint32_t ac_bias_intrpt;
128
129	/* DMA burst size */
130	uint32_t dma_burst_sz;
131
132	/* Bits per pixel */
133	uint32_t bpp;
134
135	/* FIFO DMA Request Delay */
136	uint32_t fdd;
137
138	/* TFT Alternative Signal Mapping (Only for active) */
139	bool tft_alt_mode;
140
141	/* Invert pixel clock */
142	bool invert_pxl_clk;
143
144	/* Horizontal and Vertical Sync Edge: 0=rising 1=falling */
145	uint32_t sync_edge;
146
147	/* Horizontal and Vertical Sync: Control: 0=ignore */
148	uint32_t sync_ctrl;
149
150	/* Raster Data Order Select: 1=Most-to-least 0=Least-to-most */
151	uint32_t raster_order;
152
153	/* DMA FIFO threshold */
154	uint32_t fifo_th;
155};
156
157#define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__)
158
159int tilcdc_crtc_create(struct drm_device *dev);
160irqreturn_t tilcdc_crtc_irq(struct drm_crtc *crtc);
161void tilcdc_crtc_update_clk(struct drm_crtc *crtc);
162void tilcdc_crtc_set_panel_info(struct drm_crtc *crtc,
163		const struct tilcdc_panel_info *info);
164void tilcdc_crtc_set_simulate_vesa_sync(struct drm_crtc *crtc,
165					bool simulate_vesa_sync);
166void tilcdc_crtc_shutdown(struct drm_crtc *crtc);
167int tilcdc_crtc_update_fb(struct drm_crtc *crtc,
168		struct drm_framebuffer *fb,
169		struct drm_pending_vblank_event *event);
170
171int tilcdc_plane_init(struct drm_device *dev, struct drm_plane *plane);
172
173#endif /* __TILCDC_DRV_H__ */