Loading...
1/*
2 * RTC class driver for "CMOS RTC": PCs, ACPI, etc
3 *
4 * Copyright (C) 1996 Paul Gortmaker (drivers/char/rtc.c)
5 * Copyright (C) 2006 David Brownell (convert to new framework)
6 *
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License
9 * as published by the Free Software Foundation; either version
10 * 2 of the License, or (at your option) any later version.
11 */
12
13/*
14 * The original "cmos clock" chip was an MC146818 chip, now obsolete.
15 * That defined the register interface now provided by all PCs, some
16 * non-PC systems, and incorporated into ACPI. Modern PC chipsets
17 * integrate an MC146818 clone in their southbridge, and boards use
18 * that instead of discrete clones like the DS12887 or M48T86. There
19 * are also clones that connect using the LPC bus.
20 *
21 * That register API is also used directly by various other drivers
22 * (notably for integrated NVRAM), infrastructure (x86 has code to
23 * bypass the RTC framework, directly reading the RTC during boot
24 * and updating minutes/seconds for systems using NTP synch) and
25 * utilities (like userspace 'hwclock', if no /dev node exists).
26 *
27 * So **ALL** calls to CMOS_READ and CMOS_WRITE must be done with
28 * interrupts disabled, holding the global rtc_lock, to exclude those
29 * other drivers and utilities on correctly configured systems.
30 */
31
32#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
33
34#include <linux/kernel.h>
35#include <linux/module.h>
36#include <linux/init.h>
37#include <linux/interrupt.h>
38#include <linux/spinlock.h>
39#include <linux/platform_device.h>
40#include <linux/log2.h>
41#include <linux/pm.h>
42#include <linux/of.h>
43#include <linux/of_platform.h>
44
45/* this is for "generic access to PC-style RTC" using CMOS_READ/CMOS_WRITE */
46#include <asm-generic/rtc.h>
47
48struct cmos_rtc {
49 struct rtc_device *rtc;
50 struct device *dev;
51 int irq;
52 struct resource *iomem;
53 time64_t alarm_expires;
54
55 void (*wake_on)(struct device *);
56 void (*wake_off)(struct device *);
57
58 u8 enabled_wake;
59 u8 suspend_ctrl;
60
61 /* newer hardware extends the original register set */
62 u8 day_alrm;
63 u8 mon_alrm;
64 u8 century;
65};
66
67/* both platform and pnp busses use negative numbers for invalid irqs */
68#define is_valid_irq(n) ((n) > 0)
69
70static const char driver_name[] = "rtc_cmos";
71
72/* The RTC_INTR register may have e.g. RTC_PF set even if RTC_PIE is clear;
73 * always mask it against the irq enable bits in RTC_CONTROL. Bit values
74 * are the same: PF==PIE, AF=AIE, UF=UIE; so RTC_IRQMASK works with both.
75 */
76#define RTC_IRQMASK (RTC_PF | RTC_AF | RTC_UF)
77
78static inline int is_intr(u8 rtc_intr)
79{
80 if (!(rtc_intr & RTC_IRQF))
81 return 0;
82 return rtc_intr & RTC_IRQMASK;
83}
84
85/*----------------------------------------------------------------*/
86
87/* Much modern x86 hardware has HPETs (10+ MHz timers) which, because
88 * many BIOS programmers don't set up "sane mode" IRQ routing, are mostly
89 * used in a broken "legacy replacement" mode. The breakage includes
90 * HPET #1 hijacking the IRQ for this RTC, and being unavailable for
91 * other (better) use.
92 *
93 * When that broken mode is in use, platform glue provides a partial
94 * emulation of hardware RTC IRQ facilities using HPET #1. We don't
95 * want to use HPET for anything except those IRQs though...
96 */
97#ifdef CONFIG_HPET_EMULATE_RTC
98#include <asm/hpet.h>
99#else
100
101static inline int is_hpet_enabled(void)
102{
103 return 0;
104}
105
106static inline int hpet_mask_rtc_irq_bit(unsigned long mask)
107{
108 return 0;
109}
110
111static inline int hpet_set_rtc_irq_bit(unsigned long mask)
112{
113 return 0;
114}
115
116static inline int
117hpet_set_alarm_time(unsigned char hrs, unsigned char min, unsigned char sec)
118{
119 return 0;
120}
121
122static inline int hpet_set_periodic_freq(unsigned long freq)
123{
124 return 0;
125}
126
127static inline int hpet_rtc_dropped_irq(void)
128{
129 return 0;
130}
131
132static inline int hpet_rtc_timer_init(void)
133{
134 return 0;
135}
136
137extern irq_handler_t hpet_rtc_interrupt;
138
139static inline int hpet_register_irq_handler(irq_handler_t handler)
140{
141 return 0;
142}
143
144static inline int hpet_unregister_irq_handler(irq_handler_t handler)
145{
146 return 0;
147}
148
149#endif
150
151/*----------------------------------------------------------------*/
152
153#ifdef RTC_PORT
154
155/* Most newer x86 systems have two register banks, the first used
156 * for RTC and NVRAM and the second only for NVRAM. Caller must
157 * own rtc_lock ... and we won't worry about access during NMI.
158 */
159#define can_bank2 true
160
161static inline unsigned char cmos_read_bank2(unsigned char addr)
162{
163 outb(addr, RTC_PORT(2));
164 return inb(RTC_PORT(3));
165}
166
167static inline void cmos_write_bank2(unsigned char val, unsigned char addr)
168{
169 outb(addr, RTC_PORT(2));
170 outb(val, RTC_PORT(3));
171}
172
173#else
174
175#define can_bank2 false
176
177static inline unsigned char cmos_read_bank2(unsigned char addr)
178{
179 return 0;
180}
181
182static inline void cmos_write_bank2(unsigned char val, unsigned char addr)
183{
184}
185
186#endif
187
188/*----------------------------------------------------------------*/
189
190static int cmos_read_time(struct device *dev, struct rtc_time *t)
191{
192 /* REVISIT: if the clock has a "century" register, use
193 * that instead of the heuristic in get_rtc_time().
194 * That'll make Y3K compatility (year > 2070) easy!
195 */
196 get_rtc_time(t);
197 return 0;
198}
199
200static int cmos_set_time(struct device *dev, struct rtc_time *t)
201{
202 /* REVISIT: set the "century" register if available
203 *
204 * NOTE: this ignores the issue whereby updating the seconds
205 * takes effect exactly 500ms after we write the register.
206 * (Also queueing and other delays before we get this far.)
207 */
208 return set_rtc_time(t);
209}
210
211static int cmos_read_alarm(struct device *dev, struct rtc_wkalrm *t)
212{
213 struct cmos_rtc *cmos = dev_get_drvdata(dev);
214 unsigned char rtc_control;
215
216 if (!is_valid_irq(cmos->irq))
217 return -EIO;
218
219 /* Basic alarms only support hour, minute, and seconds fields.
220 * Some also support day and month, for alarms up to a year in
221 * the future.
222 */
223 t->time.tm_mday = -1;
224 t->time.tm_mon = -1;
225
226 spin_lock_irq(&rtc_lock);
227 t->time.tm_sec = CMOS_READ(RTC_SECONDS_ALARM);
228 t->time.tm_min = CMOS_READ(RTC_MINUTES_ALARM);
229 t->time.tm_hour = CMOS_READ(RTC_HOURS_ALARM);
230
231 if (cmos->day_alrm) {
232 /* ignore upper bits on readback per ACPI spec */
233 t->time.tm_mday = CMOS_READ(cmos->day_alrm) & 0x3f;
234 if (!t->time.tm_mday)
235 t->time.tm_mday = -1;
236
237 if (cmos->mon_alrm) {
238 t->time.tm_mon = CMOS_READ(cmos->mon_alrm);
239 if (!t->time.tm_mon)
240 t->time.tm_mon = -1;
241 }
242 }
243
244 rtc_control = CMOS_READ(RTC_CONTROL);
245 spin_unlock_irq(&rtc_lock);
246
247 if (!(rtc_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
248 if (((unsigned)t->time.tm_sec) < 0x60)
249 t->time.tm_sec = bcd2bin(t->time.tm_sec);
250 else
251 t->time.tm_sec = -1;
252 if (((unsigned)t->time.tm_min) < 0x60)
253 t->time.tm_min = bcd2bin(t->time.tm_min);
254 else
255 t->time.tm_min = -1;
256 if (((unsigned)t->time.tm_hour) < 0x24)
257 t->time.tm_hour = bcd2bin(t->time.tm_hour);
258 else
259 t->time.tm_hour = -1;
260
261 if (cmos->day_alrm) {
262 if (((unsigned)t->time.tm_mday) <= 0x31)
263 t->time.tm_mday = bcd2bin(t->time.tm_mday);
264 else
265 t->time.tm_mday = -1;
266
267 if (cmos->mon_alrm) {
268 if (((unsigned)t->time.tm_mon) <= 0x12)
269 t->time.tm_mon = bcd2bin(t->time.tm_mon)-1;
270 else
271 t->time.tm_mon = -1;
272 }
273 }
274 }
275 t->time.tm_year = -1;
276
277 t->enabled = !!(rtc_control & RTC_AIE);
278 t->pending = 0;
279
280 return 0;
281}
282
283static void cmos_checkintr(struct cmos_rtc *cmos, unsigned char rtc_control)
284{
285 unsigned char rtc_intr;
286
287 /* NOTE after changing RTC_xIE bits we always read INTR_FLAGS;
288 * allegedly some older rtcs need that to handle irqs properly
289 */
290 rtc_intr = CMOS_READ(RTC_INTR_FLAGS);
291
292 if (is_hpet_enabled())
293 return;
294
295 rtc_intr &= (rtc_control & RTC_IRQMASK) | RTC_IRQF;
296 if (is_intr(rtc_intr))
297 rtc_update_irq(cmos->rtc, 1, rtc_intr);
298}
299
300static void cmos_irq_enable(struct cmos_rtc *cmos, unsigned char mask)
301{
302 unsigned char rtc_control;
303
304 /* flush any pending IRQ status, notably for update irqs,
305 * before we enable new IRQs
306 */
307 rtc_control = CMOS_READ(RTC_CONTROL);
308 cmos_checkintr(cmos, rtc_control);
309
310 rtc_control |= mask;
311 CMOS_WRITE(rtc_control, RTC_CONTROL);
312 hpet_set_rtc_irq_bit(mask);
313
314 cmos_checkintr(cmos, rtc_control);
315}
316
317static void cmos_irq_disable(struct cmos_rtc *cmos, unsigned char mask)
318{
319 unsigned char rtc_control;
320
321 rtc_control = CMOS_READ(RTC_CONTROL);
322 rtc_control &= ~mask;
323 CMOS_WRITE(rtc_control, RTC_CONTROL);
324 hpet_mask_rtc_irq_bit(mask);
325
326 cmos_checkintr(cmos, rtc_control);
327}
328
329static int cmos_set_alarm(struct device *dev, struct rtc_wkalrm *t)
330{
331 struct cmos_rtc *cmos = dev_get_drvdata(dev);
332 unsigned char mon, mday, hrs, min, sec, rtc_control;
333
334 if (!is_valid_irq(cmos->irq))
335 return -EIO;
336
337 mon = t->time.tm_mon + 1;
338 mday = t->time.tm_mday;
339 hrs = t->time.tm_hour;
340 min = t->time.tm_min;
341 sec = t->time.tm_sec;
342
343 rtc_control = CMOS_READ(RTC_CONTROL);
344 if (!(rtc_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
345 /* Writing 0xff means "don't care" or "match all". */
346 mon = (mon <= 12) ? bin2bcd(mon) : 0xff;
347 mday = (mday >= 1 && mday <= 31) ? bin2bcd(mday) : 0xff;
348 hrs = (hrs < 24) ? bin2bcd(hrs) : 0xff;
349 min = (min < 60) ? bin2bcd(min) : 0xff;
350 sec = (sec < 60) ? bin2bcd(sec) : 0xff;
351 }
352
353 spin_lock_irq(&rtc_lock);
354
355 /* next rtc irq must not be from previous alarm setting */
356 cmos_irq_disable(cmos, RTC_AIE);
357
358 /* update alarm */
359 CMOS_WRITE(hrs, RTC_HOURS_ALARM);
360 CMOS_WRITE(min, RTC_MINUTES_ALARM);
361 CMOS_WRITE(sec, RTC_SECONDS_ALARM);
362
363 /* the system may support an "enhanced" alarm */
364 if (cmos->day_alrm) {
365 CMOS_WRITE(mday, cmos->day_alrm);
366 if (cmos->mon_alrm)
367 CMOS_WRITE(mon, cmos->mon_alrm);
368 }
369
370 /* FIXME the HPET alarm glue currently ignores day_alrm
371 * and mon_alrm ...
372 */
373 hpet_set_alarm_time(t->time.tm_hour, t->time.tm_min, t->time.tm_sec);
374
375 if (t->enabled)
376 cmos_irq_enable(cmos, RTC_AIE);
377
378 spin_unlock_irq(&rtc_lock);
379
380 cmos->alarm_expires = rtc_tm_to_time64(&t->time);
381
382 return 0;
383}
384
385static int cmos_alarm_irq_enable(struct device *dev, unsigned int enabled)
386{
387 struct cmos_rtc *cmos = dev_get_drvdata(dev);
388 unsigned long flags;
389
390 if (!is_valid_irq(cmos->irq))
391 return -EINVAL;
392
393 spin_lock_irqsave(&rtc_lock, flags);
394
395 if (enabled)
396 cmos_irq_enable(cmos, RTC_AIE);
397 else
398 cmos_irq_disable(cmos, RTC_AIE);
399
400 spin_unlock_irqrestore(&rtc_lock, flags);
401 return 0;
402}
403
404#if defined(CONFIG_RTC_INTF_PROC) || defined(CONFIG_RTC_INTF_PROC_MODULE)
405
406static int cmos_procfs(struct device *dev, struct seq_file *seq)
407{
408 struct cmos_rtc *cmos = dev_get_drvdata(dev);
409 unsigned char rtc_control, valid;
410
411 spin_lock_irq(&rtc_lock);
412 rtc_control = CMOS_READ(RTC_CONTROL);
413 valid = CMOS_READ(RTC_VALID);
414 spin_unlock_irq(&rtc_lock);
415
416 /* NOTE: at least ICH6 reports battery status using a different
417 * (non-RTC) bit; and SQWE is ignored on many current systems.
418 */
419 seq_printf(seq,
420 "periodic_IRQ\t: %s\n"
421 "update_IRQ\t: %s\n"
422 "HPET_emulated\t: %s\n"
423 // "square_wave\t: %s\n"
424 "BCD\t\t: %s\n"
425 "DST_enable\t: %s\n"
426 "periodic_freq\t: %d\n"
427 "batt_status\t: %s\n",
428 (rtc_control & RTC_PIE) ? "yes" : "no",
429 (rtc_control & RTC_UIE) ? "yes" : "no",
430 is_hpet_enabled() ? "yes" : "no",
431 // (rtc_control & RTC_SQWE) ? "yes" : "no",
432 (rtc_control & RTC_DM_BINARY) ? "no" : "yes",
433 (rtc_control & RTC_DST_EN) ? "yes" : "no",
434 cmos->rtc->irq_freq,
435 (valid & RTC_VRT) ? "okay" : "dead");
436
437 return 0;
438}
439
440#else
441#define cmos_procfs NULL
442#endif
443
444static const struct rtc_class_ops cmos_rtc_ops = {
445 .read_time = cmos_read_time,
446 .set_time = cmos_set_time,
447 .read_alarm = cmos_read_alarm,
448 .set_alarm = cmos_set_alarm,
449 .proc = cmos_procfs,
450 .alarm_irq_enable = cmos_alarm_irq_enable,
451};
452
453/*----------------------------------------------------------------*/
454
455/*
456 * All these chips have at least 64 bytes of address space, shared by
457 * RTC registers and NVRAM. Most of those bytes of NVRAM are used
458 * by boot firmware. Modern chips have 128 or 256 bytes.
459 */
460
461#define NVRAM_OFFSET (RTC_REG_D + 1)
462
463static ssize_t
464cmos_nvram_read(struct file *filp, struct kobject *kobj,
465 struct bin_attribute *attr,
466 char *buf, loff_t off, size_t count)
467{
468 int retval;
469
470 off += NVRAM_OFFSET;
471 spin_lock_irq(&rtc_lock);
472 for (retval = 0; count; count--, off++, retval++) {
473 if (off < 128)
474 *buf++ = CMOS_READ(off);
475 else if (can_bank2)
476 *buf++ = cmos_read_bank2(off);
477 else
478 break;
479 }
480 spin_unlock_irq(&rtc_lock);
481
482 return retval;
483}
484
485static ssize_t
486cmos_nvram_write(struct file *filp, struct kobject *kobj,
487 struct bin_attribute *attr,
488 char *buf, loff_t off, size_t count)
489{
490 struct cmos_rtc *cmos;
491 int retval;
492
493 cmos = dev_get_drvdata(container_of(kobj, struct device, kobj));
494
495 /* NOTE: on at least PCs and Ataris, the boot firmware uses a
496 * checksum on part of the NVRAM data. That's currently ignored
497 * here. If userspace is smart enough to know what fields of
498 * NVRAM to update, updating checksums is also part of its job.
499 */
500 off += NVRAM_OFFSET;
501 spin_lock_irq(&rtc_lock);
502 for (retval = 0; count; count--, off++, retval++) {
503 /* don't trash RTC registers */
504 if (off == cmos->day_alrm
505 || off == cmos->mon_alrm
506 || off == cmos->century)
507 buf++;
508 else if (off < 128)
509 CMOS_WRITE(*buf++, off);
510 else if (can_bank2)
511 cmos_write_bank2(*buf++, off);
512 else
513 break;
514 }
515 spin_unlock_irq(&rtc_lock);
516
517 return retval;
518}
519
520static struct bin_attribute nvram = {
521 .attr = {
522 .name = "nvram",
523 .mode = S_IRUGO | S_IWUSR,
524 },
525
526 .read = cmos_nvram_read,
527 .write = cmos_nvram_write,
528 /* size gets set up later */
529};
530
531/*----------------------------------------------------------------*/
532
533static struct cmos_rtc cmos_rtc;
534
535static irqreturn_t cmos_interrupt(int irq, void *p)
536{
537 u8 irqstat;
538 u8 rtc_control;
539
540 spin_lock(&rtc_lock);
541
542 /* When the HPET interrupt handler calls us, the interrupt
543 * status is passed as arg1 instead of the irq number. But
544 * always clear irq status, even when HPET is in the way.
545 *
546 * Note that HPET and RTC are almost certainly out of phase,
547 * giving different IRQ status ...
548 */
549 irqstat = CMOS_READ(RTC_INTR_FLAGS);
550 rtc_control = CMOS_READ(RTC_CONTROL);
551 if (is_hpet_enabled())
552 irqstat = (unsigned long)irq & 0xF0;
553
554 /* If we were suspended, RTC_CONTROL may not be accurate since the
555 * bios may have cleared it.
556 */
557 if (!cmos_rtc.suspend_ctrl)
558 irqstat &= (rtc_control & RTC_IRQMASK) | RTC_IRQF;
559 else
560 irqstat &= (cmos_rtc.suspend_ctrl & RTC_IRQMASK) | RTC_IRQF;
561
562 /* All Linux RTC alarms should be treated as if they were oneshot.
563 * Similar code may be needed in system wakeup paths, in case the
564 * alarm woke the system.
565 */
566 if (irqstat & RTC_AIE) {
567 cmos_rtc.suspend_ctrl &= ~RTC_AIE;
568 rtc_control &= ~RTC_AIE;
569 CMOS_WRITE(rtc_control, RTC_CONTROL);
570 hpet_mask_rtc_irq_bit(RTC_AIE);
571 CMOS_READ(RTC_INTR_FLAGS);
572 }
573 spin_unlock(&rtc_lock);
574
575 if (is_intr(irqstat)) {
576 rtc_update_irq(p, 1, irqstat);
577 return IRQ_HANDLED;
578 } else
579 return IRQ_NONE;
580}
581
582#ifdef CONFIG_PNP
583#define INITSECTION
584
585#else
586#define INITSECTION __init
587#endif
588
589static int INITSECTION
590cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq)
591{
592 struct cmos_rtc_board_info *info = dev_get_platdata(dev);
593 int retval = 0;
594 unsigned char rtc_control;
595 unsigned address_space;
596 u32 flags = 0;
597
598 /* there can be only one ... */
599 if (cmos_rtc.dev)
600 return -EBUSY;
601
602 if (!ports)
603 return -ENODEV;
604
605 /* Claim I/O ports ASAP, minimizing conflict with legacy driver.
606 *
607 * REVISIT non-x86 systems may instead use memory space resources
608 * (needing ioremap etc), not i/o space resources like this ...
609 */
610 if (RTC_IOMAPPED)
611 ports = request_region(ports->start, resource_size(ports),
612 driver_name);
613 else
614 ports = request_mem_region(ports->start, resource_size(ports),
615 driver_name);
616 if (!ports) {
617 dev_dbg(dev, "i/o registers already in use\n");
618 return -EBUSY;
619 }
620
621 cmos_rtc.irq = rtc_irq;
622 cmos_rtc.iomem = ports;
623
624 /* Heuristic to deduce NVRAM size ... do what the legacy NVRAM
625 * driver did, but don't reject unknown configs. Old hardware
626 * won't address 128 bytes. Newer chips have multiple banks,
627 * though they may not be listed in one I/O resource.
628 */
629#if defined(CONFIG_ATARI)
630 address_space = 64;
631#elif defined(__i386__) || defined(__x86_64__) || defined(__arm__) \
632 || defined(__sparc__) || defined(__mips__) \
633 || defined(__powerpc__)
634 address_space = 128;
635#else
636#warning Assuming 128 bytes of RTC+NVRAM address space, not 64 bytes.
637 address_space = 128;
638#endif
639 if (can_bank2 && ports->end > (ports->start + 1))
640 address_space = 256;
641
642 /* For ACPI systems extension info comes from the FADT. On others,
643 * board specific setup provides it as appropriate. Systems where
644 * the alarm IRQ isn't automatically a wakeup IRQ (like ACPI, and
645 * some almost-clones) can provide hooks to make that behave.
646 *
647 * Note that ACPI doesn't preclude putting these registers into
648 * "extended" areas of the chip, including some that we won't yet
649 * expect CMOS_READ and friends to handle.
650 */
651 if (info) {
652 if (info->flags)
653 flags = info->flags;
654 if (info->address_space)
655 address_space = info->address_space;
656
657 if (info->rtc_day_alarm && info->rtc_day_alarm < 128)
658 cmos_rtc.day_alrm = info->rtc_day_alarm;
659 if (info->rtc_mon_alarm && info->rtc_mon_alarm < 128)
660 cmos_rtc.mon_alrm = info->rtc_mon_alarm;
661 if (info->rtc_century && info->rtc_century < 128)
662 cmos_rtc.century = info->rtc_century;
663
664 if (info->wake_on && info->wake_off) {
665 cmos_rtc.wake_on = info->wake_on;
666 cmos_rtc.wake_off = info->wake_off;
667 }
668 }
669
670 cmos_rtc.dev = dev;
671 dev_set_drvdata(dev, &cmos_rtc);
672
673 cmos_rtc.rtc = rtc_device_register(driver_name, dev,
674 &cmos_rtc_ops, THIS_MODULE);
675 if (IS_ERR(cmos_rtc.rtc)) {
676 retval = PTR_ERR(cmos_rtc.rtc);
677 goto cleanup0;
678 }
679
680 rename_region(ports, dev_name(&cmos_rtc.rtc->dev));
681
682 spin_lock_irq(&rtc_lock);
683
684 if (!(flags & CMOS_RTC_FLAGS_NOFREQ)) {
685 /* force periodic irq to CMOS reset default of 1024Hz;
686 *
687 * REVISIT it's been reported that at least one x86_64 ALI
688 * mobo doesn't use 32KHz here ... for portability we might
689 * need to do something about other clock frequencies.
690 */
691 cmos_rtc.rtc->irq_freq = 1024;
692 hpet_set_periodic_freq(cmos_rtc.rtc->irq_freq);
693 CMOS_WRITE(RTC_REF_CLCK_32KHZ | 0x06, RTC_FREQ_SELECT);
694 }
695
696 /* disable irqs */
697 if (is_valid_irq(rtc_irq))
698 cmos_irq_disable(&cmos_rtc, RTC_PIE | RTC_AIE | RTC_UIE);
699
700 rtc_control = CMOS_READ(RTC_CONTROL);
701
702 spin_unlock_irq(&rtc_lock);
703
704 /* FIXME:
705 * <asm-generic/rtc.h> doesn't know 12-hour mode either.
706 */
707 if (is_valid_irq(rtc_irq) && !(rtc_control & RTC_24H)) {
708 dev_warn(dev, "only 24-hr supported\n");
709 retval = -ENXIO;
710 goto cleanup1;
711 }
712
713 if (is_valid_irq(rtc_irq)) {
714 irq_handler_t rtc_cmos_int_handler;
715
716 if (is_hpet_enabled()) {
717 rtc_cmos_int_handler = hpet_rtc_interrupt;
718 retval = hpet_register_irq_handler(cmos_interrupt);
719 if (retval) {
720 dev_warn(dev, "hpet_register_irq_handler "
721 " failed in rtc_init().");
722 goto cleanup1;
723 }
724 } else
725 rtc_cmos_int_handler = cmos_interrupt;
726
727 retval = request_irq(rtc_irq, rtc_cmos_int_handler,
728 IRQF_SHARED, dev_name(&cmos_rtc.rtc->dev),
729 cmos_rtc.rtc);
730 if (retval < 0) {
731 dev_dbg(dev, "IRQ %d is already in use\n", rtc_irq);
732 goto cleanup1;
733 }
734 }
735 hpet_rtc_timer_init();
736
737 /* export at least the first block of NVRAM */
738 nvram.size = address_space - NVRAM_OFFSET;
739 retval = sysfs_create_bin_file(&dev->kobj, &nvram);
740 if (retval < 0) {
741 dev_dbg(dev, "can't create nvram file? %d\n", retval);
742 goto cleanup2;
743 }
744
745 dev_info(dev, "%s%s, %zd bytes nvram%s\n",
746 !is_valid_irq(rtc_irq) ? "no alarms" :
747 cmos_rtc.mon_alrm ? "alarms up to one year" :
748 cmos_rtc.day_alrm ? "alarms up to one month" :
749 "alarms up to one day",
750 cmos_rtc.century ? ", y3k" : "",
751 nvram.size,
752 is_hpet_enabled() ? ", hpet irqs" : "");
753
754 return 0;
755
756cleanup2:
757 if (is_valid_irq(rtc_irq))
758 free_irq(rtc_irq, cmos_rtc.rtc);
759cleanup1:
760 cmos_rtc.dev = NULL;
761 rtc_device_unregister(cmos_rtc.rtc);
762cleanup0:
763 if (RTC_IOMAPPED)
764 release_region(ports->start, resource_size(ports));
765 else
766 release_mem_region(ports->start, resource_size(ports));
767 return retval;
768}
769
770static void cmos_do_shutdown(int rtc_irq)
771{
772 spin_lock_irq(&rtc_lock);
773 if (is_valid_irq(rtc_irq))
774 cmos_irq_disable(&cmos_rtc, RTC_IRQMASK);
775 spin_unlock_irq(&rtc_lock);
776}
777
778static void __exit cmos_do_remove(struct device *dev)
779{
780 struct cmos_rtc *cmos = dev_get_drvdata(dev);
781 struct resource *ports;
782
783 cmos_do_shutdown(cmos->irq);
784
785 sysfs_remove_bin_file(&dev->kobj, &nvram);
786
787 if (is_valid_irq(cmos->irq)) {
788 free_irq(cmos->irq, cmos->rtc);
789 hpet_unregister_irq_handler(cmos_interrupt);
790 }
791
792 rtc_device_unregister(cmos->rtc);
793 cmos->rtc = NULL;
794
795 ports = cmos->iomem;
796 if (RTC_IOMAPPED)
797 release_region(ports->start, resource_size(ports));
798 else
799 release_mem_region(ports->start, resource_size(ports));
800 cmos->iomem = NULL;
801
802 cmos->dev = NULL;
803}
804
805static int cmos_aie_poweroff(struct device *dev)
806{
807 struct cmos_rtc *cmos = dev_get_drvdata(dev);
808 struct rtc_time now;
809 time64_t t_now;
810 int retval = 0;
811 unsigned char rtc_control;
812
813 if (!cmos->alarm_expires)
814 return -EINVAL;
815
816 spin_lock_irq(&rtc_lock);
817 rtc_control = CMOS_READ(RTC_CONTROL);
818 spin_unlock_irq(&rtc_lock);
819
820 /* We only care about the situation where AIE is disabled. */
821 if (rtc_control & RTC_AIE)
822 return -EBUSY;
823
824 cmos_read_time(dev, &now);
825 t_now = rtc_tm_to_time64(&now);
826
827 /*
828 * When enabling "RTC wake-up" in BIOS setup, the machine reboots
829 * automatically right after shutdown on some buggy boxes.
830 * This automatic rebooting issue won't happen when the alarm
831 * time is larger than now+1 seconds.
832 *
833 * If the alarm time is equal to now+1 seconds, the issue can be
834 * prevented by cancelling the alarm.
835 */
836 if (cmos->alarm_expires == t_now + 1) {
837 struct rtc_wkalrm alarm;
838
839 /* Cancel the AIE timer by configuring the past time. */
840 rtc_time64_to_tm(t_now - 1, &alarm.time);
841 alarm.enabled = 0;
842 retval = cmos_set_alarm(dev, &alarm);
843 } else if (cmos->alarm_expires > t_now + 1) {
844 retval = -EBUSY;
845 }
846
847 return retval;
848}
849
850#ifdef CONFIG_PM
851
852static int cmos_suspend(struct device *dev)
853{
854 struct cmos_rtc *cmos = dev_get_drvdata(dev);
855 unsigned char tmp;
856
857 /* only the alarm might be a wakeup event source */
858 spin_lock_irq(&rtc_lock);
859 cmos->suspend_ctrl = tmp = CMOS_READ(RTC_CONTROL);
860 if (tmp & (RTC_PIE|RTC_AIE|RTC_UIE)) {
861 unsigned char mask;
862
863 if (device_may_wakeup(dev))
864 mask = RTC_IRQMASK & ~RTC_AIE;
865 else
866 mask = RTC_IRQMASK;
867 tmp &= ~mask;
868 CMOS_WRITE(tmp, RTC_CONTROL);
869 hpet_mask_rtc_irq_bit(mask);
870
871 cmos_checkintr(cmos, tmp);
872 }
873 spin_unlock_irq(&rtc_lock);
874
875 if (tmp & RTC_AIE) {
876 cmos->enabled_wake = 1;
877 if (cmos->wake_on)
878 cmos->wake_on(dev);
879 else
880 enable_irq_wake(cmos->irq);
881 }
882
883 dev_dbg(dev, "suspend%s, ctrl %02x\n",
884 (tmp & RTC_AIE) ? ", alarm may wake" : "",
885 tmp);
886
887 return 0;
888}
889
890/* We want RTC alarms to wake us from e.g. ACPI G2/S5 "soft off", even
891 * after a detour through G3 "mechanical off", although the ACPI spec
892 * says wakeup should only work from G1/S4 "hibernate". To most users,
893 * distinctions between S4 and S5 are pointless. So when the hardware
894 * allows, don't draw that distinction.
895 */
896static inline int cmos_poweroff(struct device *dev)
897{
898 return cmos_suspend(dev);
899}
900
901#ifdef CONFIG_PM_SLEEP
902
903static int cmos_resume(struct device *dev)
904{
905 struct cmos_rtc *cmos = dev_get_drvdata(dev);
906 unsigned char tmp;
907
908 if (cmos->enabled_wake) {
909 if (cmos->wake_off)
910 cmos->wake_off(dev);
911 else
912 disable_irq_wake(cmos->irq);
913 cmos->enabled_wake = 0;
914 }
915
916 spin_lock_irq(&rtc_lock);
917 tmp = cmos->suspend_ctrl;
918 cmos->suspend_ctrl = 0;
919 /* re-enable any irqs previously active */
920 if (tmp & RTC_IRQMASK) {
921 unsigned char mask;
922
923 if (device_may_wakeup(dev))
924 hpet_rtc_timer_init();
925
926 do {
927 CMOS_WRITE(tmp, RTC_CONTROL);
928 hpet_set_rtc_irq_bit(tmp & RTC_IRQMASK);
929
930 mask = CMOS_READ(RTC_INTR_FLAGS);
931 mask &= (tmp & RTC_IRQMASK) | RTC_IRQF;
932 if (!is_hpet_enabled() || !is_intr(mask))
933 break;
934
935 /* force one-shot behavior if HPET blocked
936 * the wake alarm's irq
937 */
938 rtc_update_irq(cmos->rtc, 1, mask);
939 tmp &= ~RTC_AIE;
940 hpet_mask_rtc_irq_bit(RTC_AIE);
941 } while (mask & RTC_AIE);
942 }
943 spin_unlock_irq(&rtc_lock);
944
945 dev_dbg(dev, "resume, ctrl %02x\n", tmp);
946
947 return 0;
948}
949
950#endif
951#else
952
953static inline int cmos_poweroff(struct device *dev)
954{
955 return -ENOSYS;
956}
957
958#endif
959
960static SIMPLE_DEV_PM_OPS(cmos_pm_ops, cmos_suspend, cmos_resume);
961
962/*----------------------------------------------------------------*/
963
964/* On non-x86 systems, a "CMOS" RTC lives most naturally on platform_bus.
965 * ACPI systems always list these as PNPACPI devices, and pre-ACPI PCs
966 * probably list them in similar PNPBIOS tables; so PNP is more common.
967 *
968 * We don't use legacy "poke at the hardware" probing. Ancient PCs that
969 * predate even PNPBIOS should set up platform_bus devices.
970 */
971
972#ifdef CONFIG_ACPI
973
974#include <linux/acpi.h>
975
976static u32 rtc_handler(void *context)
977{
978 struct device *dev = context;
979
980 pm_wakeup_event(dev, 0);
981 acpi_clear_event(ACPI_EVENT_RTC);
982 acpi_disable_event(ACPI_EVENT_RTC, 0);
983 return ACPI_INTERRUPT_HANDLED;
984}
985
986static inline void rtc_wake_setup(struct device *dev)
987{
988 acpi_install_fixed_event_handler(ACPI_EVENT_RTC, rtc_handler, dev);
989 /*
990 * After the RTC handler is installed, the Fixed_RTC event should
991 * be disabled. Only when the RTC alarm is set will it be enabled.
992 */
993 acpi_clear_event(ACPI_EVENT_RTC);
994 acpi_disable_event(ACPI_EVENT_RTC, 0);
995}
996
997static void rtc_wake_on(struct device *dev)
998{
999 acpi_clear_event(ACPI_EVENT_RTC);
1000 acpi_enable_event(ACPI_EVENT_RTC, 0);
1001}
1002
1003static void rtc_wake_off(struct device *dev)
1004{
1005 acpi_disable_event(ACPI_EVENT_RTC, 0);
1006}
1007
1008/* Every ACPI platform has a mc146818 compatible "cmos rtc". Here we find
1009 * its device node and pass extra config data. This helps its driver use
1010 * capabilities that the now-obsolete mc146818 didn't have, and informs it
1011 * that this board's RTC is wakeup-capable (per ACPI spec).
1012 */
1013static struct cmos_rtc_board_info acpi_rtc_info;
1014
1015static void cmos_wake_setup(struct device *dev)
1016{
1017 if (acpi_disabled)
1018 return;
1019
1020 rtc_wake_setup(dev);
1021 acpi_rtc_info.wake_on = rtc_wake_on;
1022 acpi_rtc_info.wake_off = rtc_wake_off;
1023
1024 /* workaround bug in some ACPI tables */
1025 if (acpi_gbl_FADT.month_alarm && !acpi_gbl_FADT.day_alarm) {
1026 dev_dbg(dev, "bogus FADT month_alarm (%d)\n",
1027 acpi_gbl_FADT.month_alarm);
1028 acpi_gbl_FADT.month_alarm = 0;
1029 }
1030
1031 acpi_rtc_info.rtc_day_alarm = acpi_gbl_FADT.day_alarm;
1032 acpi_rtc_info.rtc_mon_alarm = acpi_gbl_FADT.month_alarm;
1033 acpi_rtc_info.rtc_century = acpi_gbl_FADT.century;
1034
1035 /* NOTE: S4_RTC_WAKE is NOT currently useful to Linux */
1036 if (acpi_gbl_FADT.flags & ACPI_FADT_S4_RTC_WAKE)
1037 dev_info(dev, "RTC can wake from S4\n");
1038
1039 dev->platform_data = &acpi_rtc_info;
1040
1041 /* RTC always wakes from S1/S2/S3, and often S4/STD */
1042 device_init_wakeup(dev, 1);
1043}
1044
1045#else
1046
1047static void cmos_wake_setup(struct device *dev)
1048{
1049}
1050
1051#endif
1052
1053#ifdef CONFIG_PNP
1054
1055#include <linux/pnp.h>
1056
1057static int cmos_pnp_probe(struct pnp_dev *pnp, const struct pnp_device_id *id)
1058{
1059 cmos_wake_setup(&pnp->dev);
1060
1061 if (pnp_port_start(pnp, 0) == 0x70 && !pnp_irq_valid(pnp, 0))
1062 /* Some machines contain a PNP entry for the RTC, but
1063 * don't define the IRQ. It should always be safe to
1064 * hardcode it in these cases
1065 */
1066 return cmos_do_probe(&pnp->dev,
1067 pnp_get_resource(pnp, IORESOURCE_IO, 0), 8);
1068 else
1069 return cmos_do_probe(&pnp->dev,
1070 pnp_get_resource(pnp, IORESOURCE_IO, 0),
1071 pnp_irq(pnp, 0));
1072}
1073
1074static void __exit cmos_pnp_remove(struct pnp_dev *pnp)
1075{
1076 cmos_do_remove(&pnp->dev);
1077}
1078
1079static void cmos_pnp_shutdown(struct pnp_dev *pnp)
1080{
1081 struct device *dev = &pnp->dev;
1082 struct cmos_rtc *cmos = dev_get_drvdata(dev);
1083
1084 if (system_state == SYSTEM_POWER_OFF) {
1085 int retval = cmos_poweroff(dev);
1086
1087 if (cmos_aie_poweroff(dev) < 0 && !retval)
1088 return;
1089 }
1090
1091 cmos_do_shutdown(cmos->irq);
1092}
1093
1094static const struct pnp_device_id rtc_ids[] = {
1095 { .id = "PNP0b00", },
1096 { .id = "PNP0b01", },
1097 { .id = "PNP0b02", },
1098 { },
1099};
1100MODULE_DEVICE_TABLE(pnp, rtc_ids);
1101
1102static struct pnp_driver cmos_pnp_driver = {
1103 .name = (char *) driver_name,
1104 .id_table = rtc_ids,
1105 .probe = cmos_pnp_probe,
1106 .remove = __exit_p(cmos_pnp_remove),
1107 .shutdown = cmos_pnp_shutdown,
1108
1109 /* flag ensures resume() gets called, and stops syslog spam */
1110 .flags = PNP_DRIVER_RES_DO_NOT_CHANGE,
1111 .driver = {
1112 .pm = &cmos_pm_ops,
1113 },
1114};
1115
1116#endif /* CONFIG_PNP */
1117
1118#ifdef CONFIG_OF
1119static const struct of_device_id of_cmos_match[] = {
1120 {
1121 .compatible = "motorola,mc146818",
1122 },
1123 { },
1124};
1125MODULE_DEVICE_TABLE(of, of_cmos_match);
1126
1127static __init void cmos_of_init(struct platform_device *pdev)
1128{
1129 struct device_node *node = pdev->dev.of_node;
1130 struct rtc_time time;
1131 int ret;
1132 const __be32 *val;
1133
1134 if (!node)
1135 return;
1136
1137 val = of_get_property(node, "ctrl-reg", NULL);
1138 if (val)
1139 CMOS_WRITE(be32_to_cpup(val), RTC_CONTROL);
1140
1141 val = of_get_property(node, "freq-reg", NULL);
1142 if (val)
1143 CMOS_WRITE(be32_to_cpup(val), RTC_FREQ_SELECT);
1144
1145 get_rtc_time(&time);
1146 ret = rtc_valid_tm(&time);
1147 if (ret) {
1148 struct rtc_time def_time = {
1149 .tm_year = 1,
1150 .tm_mday = 1,
1151 };
1152 set_rtc_time(&def_time);
1153 }
1154}
1155#else
1156static inline void cmos_of_init(struct platform_device *pdev) {}
1157#endif
1158/*----------------------------------------------------------------*/
1159
1160/* Platform setup should have set up an RTC device, when PNP is
1161 * unavailable ... this could happen even on (older) PCs.
1162 */
1163
1164static int __init cmos_platform_probe(struct platform_device *pdev)
1165{
1166 struct resource *resource;
1167 int irq;
1168
1169 cmos_of_init(pdev);
1170 cmos_wake_setup(&pdev->dev);
1171
1172 if (RTC_IOMAPPED)
1173 resource = platform_get_resource(pdev, IORESOURCE_IO, 0);
1174 else
1175 resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1176 irq = platform_get_irq(pdev, 0);
1177 if (irq < 0)
1178 irq = -1;
1179
1180 return cmos_do_probe(&pdev->dev, resource, irq);
1181}
1182
1183static int __exit cmos_platform_remove(struct platform_device *pdev)
1184{
1185 cmos_do_remove(&pdev->dev);
1186 return 0;
1187}
1188
1189static void cmos_platform_shutdown(struct platform_device *pdev)
1190{
1191 struct device *dev = &pdev->dev;
1192 struct cmos_rtc *cmos = dev_get_drvdata(dev);
1193
1194 if (system_state == SYSTEM_POWER_OFF) {
1195 int retval = cmos_poweroff(dev);
1196
1197 if (cmos_aie_poweroff(dev) < 0 && !retval)
1198 return;
1199 }
1200
1201 cmos_do_shutdown(cmos->irq);
1202}
1203
1204/* work with hotplug and coldplug */
1205MODULE_ALIAS("platform:rtc_cmos");
1206
1207static struct platform_driver cmos_platform_driver = {
1208 .remove = __exit_p(cmos_platform_remove),
1209 .shutdown = cmos_platform_shutdown,
1210 .driver = {
1211 .name = driver_name,
1212#ifdef CONFIG_PM
1213 .pm = &cmos_pm_ops,
1214#endif
1215 .of_match_table = of_match_ptr(of_cmos_match),
1216 }
1217};
1218
1219#ifdef CONFIG_PNP
1220static bool pnp_driver_registered;
1221#endif
1222static bool platform_driver_registered;
1223
1224static int __init cmos_init(void)
1225{
1226 int retval = 0;
1227
1228#ifdef CONFIG_PNP
1229 retval = pnp_register_driver(&cmos_pnp_driver);
1230 if (retval == 0)
1231 pnp_driver_registered = true;
1232#endif
1233
1234 if (!cmos_rtc.dev) {
1235 retval = platform_driver_probe(&cmos_platform_driver,
1236 cmos_platform_probe);
1237 if (retval == 0)
1238 platform_driver_registered = true;
1239 }
1240
1241 if (retval == 0)
1242 return 0;
1243
1244#ifdef CONFIG_PNP
1245 if (pnp_driver_registered)
1246 pnp_unregister_driver(&cmos_pnp_driver);
1247#endif
1248 return retval;
1249}
1250module_init(cmos_init);
1251
1252static void __exit cmos_exit(void)
1253{
1254#ifdef CONFIG_PNP
1255 if (pnp_driver_registered)
1256 pnp_unregister_driver(&cmos_pnp_driver);
1257#endif
1258 if (platform_driver_registered)
1259 platform_driver_unregister(&cmos_platform_driver);
1260}
1261module_exit(cmos_exit);
1262
1263
1264MODULE_AUTHOR("David Brownell");
1265MODULE_DESCRIPTION("Driver for PC-style 'CMOS' RTCs");
1266MODULE_LICENSE("GPL");
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * RTC class driver for "CMOS RTC": PCs, ACPI, etc
4 *
5 * Copyright (C) 1996 Paul Gortmaker (drivers/char/rtc.c)
6 * Copyright (C) 2006 David Brownell (convert to new framework)
7 */
8
9/*
10 * The original "cmos clock" chip was an MC146818 chip, now obsolete.
11 * That defined the register interface now provided by all PCs, some
12 * non-PC systems, and incorporated into ACPI. Modern PC chipsets
13 * integrate an MC146818 clone in their southbridge, and boards use
14 * that instead of discrete clones like the DS12887 or M48T86. There
15 * are also clones that connect using the LPC bus.
16 *
17 * That register API is also used directly by various other drivers
18 * (notably for integrated NVRAM), infrastructure (x86 has code to
19 * bypass the RTC framework, directly reading the RTC during boot
20 * and updating minutes/seconds for systems using NTP synch) and
21 * utilities (like userspace 'hwclock', if no /dev node exists).
22 *
23 * So **ALL** calls to CMOS_READ and CMOS_WRITE must be done with
24 * interrupts disabled, holding the global rtc_lock, to exclude those
25 * other drivers and utilities on correctly configured systems.
26 */
27
28#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
29
30#include <linux/kernel.h>
31#include <linux/module.h>
32#include <linux/init.h>
33#include <linux/interrupt.h>
34#include <linux/spinlock.h>
35#include <linux/platform_device.h>
36#include <linux/log2.h>
37#include <linux/pm.h>
38#include <linux/of.h>
39#include <linux/of_platform.h>
40#ifdef CONFIG_X86
41#include <asm/i8259.h>
42#include <asm/processor.h>
43#include <linux/dmi.h>
44#endif
45
46/* this is for "generic access to PC-style RTC" using CMOS_READ/CMOS_WRITE */
47#include <linux/mc146818rtc.h>
48
49#ifdef CONFIG_ACPI
50/*
51 * Use ACPI SCI to replace HPET interrupt for RTC Alarm event
52 *
53 * If cleared, ACPI SCI is only used to wake up the system from suspend
54 *
55 * If set, ACPI SCI is used to handle UIE/AIE and system wakeup
56 */
57
58static bool use_acpi_alarm;
59module_param(use_acpi_alarm, bool, 0444);
60
61static inline int cmos_use_acpi_alarm(void)
62{
63 return use_acpi_alarm;
64}
65#else /* !CONFIG_ACPI */
66
67static inline int cmos_use_acpi_alarm(void)
68{
69 return 0;
70}
71#endif
72
73struct cmos_rtc {
74 struct rtc_device *rtc;
75 struct device *dev;
76 int irq;
77 struct resource *iomem;
78 time64_t alarm_expires;
79
80 void (*wake_on)(struct device *);
81 void (*wake_off)(struct device *);
82
83 u8 enabled_wake;
84 u8 suspend_ctrl;
85
86 /* newer hardware extends the original register set */
87 u8 day_alrm;
88 u8 mon_alrm;
89 u8 century;
90
91 struct rtc_wkalrm saved_wkalrm;
92};
93
94/* both platform and pnp busses use negative numbers for invalid irqs */
95#define is_valid_irq(n) ((n) > 0)
96
97static const char driver_name[] = "rtc_cmos";
98
99/* The RTC_INTR register may have e.g. RTC_PF set even if RTC_PIE is clear;
100 * always mask it against the irq enable bits in RTC_CONTROL. Bit values
101 * are the same: PF==PIE, AF=AIE, UF=UIE; so RTC_IRQMASK works with both.
102 */
103#define RTC_IRQMASK (RTC_PF | RTC_AF | RTC_UF)
104
105static inline int is_intr(u8 rtc_intr)
106{
107 if (!(rtc_intr & RTC_IRQF))
108 return 0;
109 return rtc_intr & RTC_IRQMASK;
110}
111
112/*----------------------------------------------------------------*/
113
114/* Much modern x86 hardware has HPETs (10+ MHz timers) which, because
115 * many BIOS programmers don't set up "sane mode" IRQ routing, are mostly
116 * used in a broken "legacy replacement" mode. The breakage includes
117 * HPET #1 hijacking the IRQ for this RTC, and being unavailable for
118 * other (better) use.
119 *
120 * When that broken mode is in use, platform glue provides a partial
121 * emulation of hardware RTC IRQ facilities using HPET #1. We don't
122 * want to use HPET for anything except those IRQs though...
123 */
124#ifdef CONFIG_HPET_EMULATE_RTC
125#include <asm/hpet.h>
126#else
127
128static inline int is_hpet_enabled(void)
129{
130 return 0;
131}
132
133static inline int hpet_mask_rtc_irq_bit(unsigned long mask)
134{
135 return 0;
136}
137
138static inline int hpet_set_rtc_irq_bit(unsigned long mask)
139{
140 return 0;
141}
142
143static inline int
144hpet_set_alarm_time(unsigned char hrs, unsigned char min, unsigned char sec)
145{
146 return 0;
147}
148
149static inline int hpet_set_periodic_freq(unsigned long freq)
150{
151 return 0;
152}
153
154static inline int hpet_rtc_dropped_irq(void)
155{
156 return 0;
157}
158
159static inline int hpet_rtc_timer_init(void)
160{
161 return 0;
162}
163
164extern irq_handler_t hpet_rtc_interrupt;
165
166static inline int hpet_register_irq_handler(irq_handler_t handler)
167{
168 return 0;
169}
170
171static inline int hpet_unregister_irq_handler(irq_handler_t handler)
172{
173 return 0;
174}
175
176#endif
177
178/* Don't use HPET for RTC Alarm event if ACPI Fixed event is used */
179static inline int use_hpet_alarm(void)
180{
181 return is_hpet_enabled() && !cmos_use_acpi_alarm();
182}
183
184/*----------------------------------------------------------------*/
185
186#ifdef RTC_PORT
187
188/* Most newer x86 systems have two register banks, the first used
189 * for RTC and NVRAM and the second only for NVRAM. Caller must
190 * own rtc_lock ... and we won't worry about access during NMI.
191 */
192#define can_bank2 true
193
194static inline unsigned char cmos_read_bank2(unsigned char addr)
195{
196 outb(addr, RTC_PORT(2));
197 return inb(RTC_PORT(3));
198}
199
200static inline void cmos_write_bank2(unsigned char val, unsigned char addr)
201{
202 outb(addr, RTC_PORT(2));
203 outb(val, RTC_PORT(3));
204}
205
206#else
207
208#define can_bank2 false
209
210static inline unsigned char cmos_read_bank2(unsigned char addr)
211{
212 return 0;
213}
214
215static inline void cmos_write_bank2(unsigned char val, unsigned char addr)
216{
217}
218
219#endif
220
221/*----------------------------------------------------------------*/
222
223static int cmos_read_time(struct device *dev, struct rtc_time *t)
224{
225 /*
226 * If pm_trace abused the RTC for storage, set the timespec to 0,
227 * which tells the caller that this RTC value is unusable.
228 */
229 if (!pm_trace_rtc_valid())
230 return -EIO;
231
232 /* REVISIT: if the clock has a "century" register, use
233 * that instead of the heuristic in mc146818_get_time().
234 * That'll make Y3K compatility (year > 2070) easy!
235 */
236 mc146818_get_time(t);
237 return 0;
238}
239
240static int cmos_set_time(struct device *dev, struct rtc_time *t)
241{
242 /* REVISIT: set the "century" register if available
243 *
244 * NOTE: this ignores the issue whereby updating the seconds
245 * takes effect exactly 500ms after we write the register.
246 * (Also queueing and other delays before we get this far.)
247 */
248 return mc146818_set_time(t);
249}
250
251static int cmos_read_alarm(struct device *dev, struct rtc_wkalrm *t)
252{
253 struct cmos_rtc *cmos = dev_get_drvdata(dev);
254 unsigned char rtc_control;
255
256 /* This not only a rtc_op, but also called directly */
257 if (!is_valid_irq(cmos->irq))
258 return -EIO;
259
260 /* Basic alarms only support hour, minute, and seconds fields.
261 * Some also support day and month, for alarms up to a year in
262 * the future.
263 */
264
265 spin_lock_irq(&rtc_lock);
266 t->time.tm_sec = CMOS_READ(RTC_SECONDS_ALARM);
267 t->time.tm_min = CMOS_READ(RTC_MINUTES_ALARM);
268 t->time.tm_hour = CMOS_READ(RTC_HOURS_ALARM);
269
270 if (cmos->day_alrm) {
271 /* ignore upper bits on readback per ACPI spec */
272 t->time.tm_mday = CMOS_READ(cmos->day_alrm) & 0x3f;
273 if (!t->time.tm_mday)
274 t->time.tm_mday = -1;
275
276 if (cmos->mon_alrm) {
277 t->time.tm_mon = CMOS_READ(cmos->mon_alrm);
278 if (!t->time.tm_mon)
279 t->time.tm_mon = -1;
280 }
281 }
282
283 rtc_control = CMOS_READ(RTC_CONTROL);
284 spin_unlock_irq(&rtc_lock);
285
286 if (!(rtc_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
287 if (((unsigned)t->time.tm_sec) < 0x60)
288 t->time.tm_sec = bcd2bin(t->time.tm_sec);
289 else
290 t->time.tm_sec = -1;
291 if (((unsigned)t->time.tm_min) < 0x60)
292 t->time.tm_min = bcd2bin(t->time.tm_min);
293 else
294 t->time.tm_min = -1;
295 if (((unsigned)t->time.tm_hour) < 0x24)
296 t->time.tm_hour = bcd2bin(t->time.tm_hour);
297 else
298 t->time.tm_hour = -1;
299
300 if (cmos->day_alrm) {
301 if (((unsigned)t->time.tm_mday) <= 0x31)
302 t->time.tm_mday = bcd2bin(t->time.tm_mday);
303 else
304 t->time.tm_mday = -1;
305
306 if (cmos->mon_alrm) {
307 if (((unsigned)t->time.tm_mon) <= 0x12)
308 t->time.tm_mon = bcd2bin(t->time.tm_mon)-1;
309 else
310 t->time.tm_mon = -1;
311 }
312 }
313 }
314
315 t->enabled = !!(rtc_control & RTC_AIE);
316 t->pending = 0;
317
318 return 0;
319}
320
321static void cmos_checkintr(struct cmos_rtc *cmos, unsigned char rtc_control)
322{
323 unsigned char rtc_intr;
324
325 /* NOTE after changing RTC_xIE bits we always read INTR_FLAGS;
326 * allegedly some older rtcs need that to handle irqs properly
327 */
328 rtc_intr = CMOS_READ(RTC_INTR_FLAGS);
329
330 if (use_hpet_alarm())
331 return;
332
333 rtc_intr &= (rtc_control & RTC_IRQMASK) | RTC_IRQF;
334 if (is_intr(rtc_intr))
335 rtc_update_irq(cmos->rtc, 1, rtc_intr);
336}
337
338static void cmos_irq_enable(struct cmos_rtc *cmos, unsigned char mask)
339{
340 unsigned char rtc_control;
341
342 /* flush any pending IRQ status, notably for update irqs,
343 * before we enable new IRQs
344 */
345 rtc_control = CMOS_READ(RTC_CONTROL);
346 cmos_checkintr(cmos, rtc_control);
347
348 rtc_control |= mask;
349 CMOS_WRITE(rtc_control, RTC_CONTROL);
350 if (use_hpet_alarm())
351 hpet_set_rtc_irq_bit(mask);
352
353 if ((mask & RTC_AIE) && cmos_use_acpi_alarm()) {
354 if (cmos->wake_on)
355 cmos->wake_on(cmos->dev);
356 }
357
358 cmos_checkintr(cmos, rtc_control);
359}
360
361static void cmos_irq_disable(struct cmos_rtc *cmos, unsigned char mask)
362{
363 unsigned char rtc_control;
364
365 rtc_control = CMOS_READ(RTC_CONTROL);
366 rtc_control &= ~mask;
367 CMOS_WRITE(rtc_control, RTC_CONTROL);
368 if (use_hpet_alarm())
369 hpet_mask_rtc_irq_bit(mask);
370
371 if ((mask & RTC_AIE) && cmos_use_acpi_alarm()) {
372 if (cmos->wake_off)
373 cmos->wake_off(cmos->dev);
374 }
375
376 cmos_checkintr(cmos, rtc_control);
377}
378
379static int cmos_validate_alarm(struct device *dev, struct rtc_wkalrm *t)
380{
381 struct cmos_rtc *cmos = dev_get_drvdata(dev);
382 struct rtc_time now;
383
384 cmos_read_time(dev, &now);
385
386 if (!cmos->day_alrm) {
387 time64_t t_max_date;
388 time64_t t_alrm;
389
390 t_max_date = rtc_tm_to_time64(&now);
391 t_max_date += 24 * 60 * 60 - 1;
392 t_alrm = rtc_tm_to_time64(&t->time);
393 if (t_alrm > t_max_date) {
394 dev_err(dev,
395 "Alarms can be up to one day in the future\n");
396 return -EINVAL;
397 }
398 } else if (!cmos->mon_alrm) {
399 struct rtc_time max_date = now;
400 time64_t t_max_date;
401 time64_t t_alrm;
402 int max_mday;
403
404 if (max_date.tm_mon == 11) {
405 max_date.tm_mon = 0;
406 max_date.tm_year += 1;
407 } else {
408 max_date.tm_mon += 1;
409 }
410 max_mday = rtc_month_days(max_date.tm_mon, max_date.tm_year);
411 if (max_date.tm_mday > max_mday)
412 max_date.tm_mday = max_mday;
413
414 t_max_date = rtc_tm_to_time64(&max_date);
415 t_max_date -= 1;
416 t_alrm = rtc_tm_to_time64(&t->time);
417 if (t_alrm > t_max_date) {
418 dev_err(dev,
419 "Alarms can be up to one month in the future\n");
420 return -EINVAL;
421 }
422 } else {
423 struct rtc_time max_date = now;
424 time64_t t_max_date;
425 time64_t t_alrm;
426 int max_mday;
427
428 max_date.tm_year += 1;
429 max_mday = rtc_month_days(max_date.tm_mon, max_date.tm_year);
430 if (max_date.tm_mday > max_mday)
431 max_date.tm_mday = max_mday;
432
433 t_max_date = rtc_tm_to_time64(&max_date);
434 t_max_date -= 1;
435 t_alrm = rtc_tm_to_time64(&t->time);
436 if (t_alrm > t_max_date) {
437 dev_err(dev,
438 "Alarms can be up to one year in the future\n");
439 return -EINVAL;
440 }
441 }
442
443 return 0;
444}
445
446static int cmos_set_alarm(struct device *dev, struct rtc_wkalrm *t)
447{
448 struct cmos_rtc *cmos = dev_get_drvdata(dev);
449 unsigned char mon, mday, hrs, min, sec, rtc_control;
450 int ret;
451
452 /* This not only a rtc_op, but also called directly */
453 if (!is_valid_irq(cmos->irq))
454 return -EIO;
455
456 ret = cmos_validate_alarm(dev, t);
457 if (ret < 0)
458 return ret;
459
460 mon = t->time.tm_mon + 1;
461 mday = t->time.tm_mday;
462 hrs = t->time.tm_hour;
463 min = t->time.tm_min;
464 sec = t->time.tm_sec;
465
466 rtc_control = CMOS_READ(RTC_CONTROL);
467 if (!(rtc_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
468 /* Writing 0xff means "don't care" or "match all". */
469 mon = (mon <= 12) ? bin2bcd(mon) : 0xff;
470 mday = (mday >= 1 && mday <= 31) ? bin2bcd(mday) : 0xff;
471 hrs = (hrs < 24) ? bin2bcd(hrs) : 0xff;
472 min = (min < 60) ? bin2bcd(min) : 0xff;
473 sec = (sec < 60) ? bin2bcd(sec) : 0xff;
474 }
475
476 spin_lock_irq(&rtc_lock);
477
478 /* next rtc irq must not be from previous alarm setting */
479 cmos_irq_disable(cmos, RTC_AIE);
480
481 /* update alarm */
482 CMOS_WRITE(hrs, RTC_HOURS_ALARM);
483 CMOS_WRITE(min, RTC_MINUTES_ALARM);
484 CMOS_WRITE(sec, RTC_SECONDS_ALARM);
485
486 /* the system may support an "enhanced" alarm */
487 if (cmos->day_alrm) {
488 CMOS_WRITE(mday, cmos->day_alrm);
489 if (cmos->mon_alrm)
490 CMOS_WRITE(mon, cmos->mon_alrm);
491 }
492
493 if (use_hpet_alarm()) {
494 /*
495 * FIXME the HPET alarm glue currently ignores day_alrm
496 * and mon_alrm ...
497 */
498 hpet_set_alarm_time(t->time.tm_hour, t->time.tm_min,
499 t->time.tm_sec);
500 }
501
502 if (t->enabled)
503 cmos_irq_enable(cmos, RTC_AIE);
504
505 spin_unlock_irq(&rtc_lock);
506
507 cmos->alarm_expires = rtc_tm_to_time64(&t->time);
508
509 return 0;
510}
511
512static int cmos_alarm_irq_enable(struct device *dev, unsigned int enabled)
513{
514 struct cmos_rtc *cmos = dev_get_drvdata(dev);
515 unsigned long flags;
516
517 spin_lock_irqsave(&rtc_lock, flags);
518
519 if (enabled)
520 cmos_irq_enable(cmos, RTC_AIE);
521 else
522 cmos_irq_disable(cmos, RTC_AIE);
523
524 spin_unlock_irqrestore(&rtc_lock, flags);
525 return 0;
526}
527
528#if IS_ENABLED(CONFIG_RTC_INTF_PROC)
529
530static int cmos_procfs(struct device *dev, struct seq_file *seq)
531{
532 struct cmos_rtc *cmos = dev_get_drvdata(dev);
533 unsigned char rtc_control, valid;
534
535 spin_lock_irq(&rtc_lock);
536 rtc_control = CMOS_READ(RTC_CONTROL);
537 valid = CMOS_READ(RTC_VALID);
538 spin_unlock_irq(&rtc_lock);
539
540 /* NOTE: at least ICH6 reports battery status using a different
541 * (non-RTC) bit; and SQWE is ignored on many current systems.
542 */
543 seq_printf(seq,
544 "periodic_IRQ\t: %s\n"
545 "update_IRQ\t: %s\n"
546 "HPET_emulated\t: %s\n"
547 // "square_wave\t: %s\n"
548 "BCD\t\t: %s\n"
549 "DST_enable\t: %s\n"
550 "periodic_freq\t: %d\n"
551 "batt_status\t: %s\n",
552 (rtc_control & RTC_PIE) ? "yes" : "no",
553 (rtc_control & RTC_UIE) ? "yes" : "no",
554 use_hpet_alarm() ? "yes" : "no",
555 // (rtc_control & RTC_SQWE) ? "yes" : "no",
556 (rtc_control & RTC_DM_BINARY) ? "no" : "yes",
557 (rtc_control & RTC_DST_EN) ? "yes" : "no",
558 cmos->rtc->irq_freq,
559 (valid & RTC_VRT) ? "okay" : "dead");
560
561 return 0;
562}
563
564#else
565#define cmos_procfs NULL
566#endif
567
568static const struct rtc_class_ops cmos_rtc_ops = {
569 .read_time = cmos_read_time,
570 .set_time = cmos_set_time,
571 .read_alarm = cmos_read_alarm,
572 .set_alarm = cmos_set_alarm,
573 .proc = cmos_procfs,
574 .alarm_irq_enable = cmos_alarm_irq_enable,
575};
576
577static const struct rtc_class_ops cmos_rtc_ops_no_alarm = {
578 .read_time = cmos_read_time,
579 .set_time = cmos_set_time,
580 .proc = cmos_procfs,
581};
582
583/*----------------------------------------------------------------*/
584
585/*
586 * All these chips have at least 64 bytes of address space, shared by
587 * RTC registers and NVRAM. Most of those bytes of NVRAM are used
588 * by boot firmware. Modern chips have 128 or 256 bytes.
589 */
590
591#define NVRAM_OFFSET (RTC_REG_D + 1)
592
593static int cmos_nvram_read(void *priv, unsigned int off, void *val,
594 size_t count)
595{
596 unsigned char *buf = val;
597 int retval;
598
599 off += NVRAM_OFFSET;
600 spin_lock_irq(&rtc_lock);
601 for (retval = 0; count; count--, off++, retval++) {
602 if (off < 128)
603 *buf++ = CMOS_READ(off);
604 else if (can_bank2)
605 *buf++ = cmos_read_bank2(off);
606 else
607 break;
608 }
609 spin_unlock_irq(&rtc_lock);
610
611 return retval;
612}
613
614static int cmos_nvram_write(void *priv, unsigned int off, void *val,
615 size_t count)
616{
617 struct cmos_rtc *cmos = priv;
618 unsigned char *buf = val;
619 int retval;
620
621 /* NOTE: on at least PCs and Ataris, the boot firmware uses a
622 * checksum on part of the NVRAM data. That's currently ignored
623 * here. If userspace is smart enough to know what fields of
624 * NVRAM to update, updating checksums is also part of its job.
625 */
626 off += NVRAM_OFFSET;
627 spin_lock_irq(&rtc_lock);
628 for (retval = 0; count; count--, off++, retval++) {
629 /* don't trash RTC registers */
630 if (off == cmos->day_alrm
631 || off == cmos->mon_alrm
632 || off == cmos->century)
633 buf++;
634 else if (off < 128)
635 CMOS_WRITE(*buf++, off);
636 else if (can_bank2)
637 cmos_write_bank2(*buf++, off);
638 else
639 break;
640 }
641 spin_unlock_irq(&rtc_lock);
642
643 return retval;
644}
645
646/*----------------------------------------------------------------*/
647
648static struct cmos_rtc cmos_rtc;
649
650static irqreturn_t cmos_interrupt(int irq, void *p)
651{
652 unsigned long flags;
653 u8 irqstat;
654 u8 rtc_control;
655
656 spin_lock_irqsave(&rtc_lock, flags);
657
658 /* When the HPET interrupt handler calls us, the interrupt
659 * status is passed as arg1 instead of the irq number. But
660 * always clear irq status, even when HPET is in the way.
661 *
662 * Note that HPET and RTC are almost certainly out of phase,
663 * giving different IRQ status ...
664 */
665 irqstat = CMOS_READ(RTC_INTR_FLAGS);
666 rtc_control = CMOS_READ(RTC_CONTROL);
667 if (use_hpet_alarm())
668 irqstat = (unsigned long)irq & 0xF0;
669
670 /* If we were suspended, RTC_CONTROL may not be accurate since the
671 * bios may have cleared it.
672 */
673 if (!cmos_rtc.suspend_ctrl)
674 irqstat &= (rtc_control & RTC_IRQMASK) | RTC_IRQF;
675 else
676 irqstat &= (cmos_rtc.suspend_ctrl & RTC_IRQMASK) | RTC_IRQF;
677
678 /* All Linux RTC alarms should be treated as if they were oneshot.
679 * Similar code may be needed in system wakeup paths, in case the
680 * alarm woke the system.
681 */
682 if (irqstat & RTC_AIE) {
683 cmos_rtc.suspend_ctrl &= ~RTC_AIE;
684 rtc_control &= ~RTC_AIE;
685 CMOS_WRITE(rtc_control, RTC_CONTROL);
686 if (use_hpet_alarm())
687 hpet_mask_rtc_irq_bit(RTC_AIE);
688 CMOS_READ(RTC_INTR_FLAGS);
689 }
690 spin_unlock_irqrestore(&rtc_lock, flags);
691
692 if (is_intr(irqstat)) {
693 rtc_update_irq(p, 1, irqstat);
694 return IRQ_HANDLED;
695 } else
696 return IRQ_NONE;
697}
698
699#ifdef CONFIG_PNP
700#define INITSECTION
701
702#else
703#define INITSECTION __init
704#endif
705
706static int INITSECTION
707cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq)
708{
709 struct cmos_rtc_board_info *info = dev_get_platdata(dev);
710 int retval = 0;
711 unsigned char rtc_control;
712 unsigned address_space;
713 u32 flags = 0;
714 struct nvmem_config nvmem_cfg = {
715 .name = "cmos_nvram",
716 .word_size = 1,
717 .stride = 1,
718 .reg_read = cmos_nvram_read,
719 .reg_write = cmos_nvram_write,
720 .priv = &cmos_rtc,
721 };
722
723 /* there can be only one ... */
724 if (cmos_rtc.dev)
725 return -EBUSY;
726
727 if (!ports)
728 return -ENODEV;
729
730 /* Claim I/O ports ASAP, minimizing conflict with legacy driver.
731 *
732 * REVISIT non-x86 systems may instead use memory space resources
733 * (needing ioremap etc), not i/o space resources like this ...
734 */
735 if (RTC_IOMAPPED)
736 ports = request_region(ports->start, resource_size(ports),
737 driver_name);
738 else
739 ports = request_mem_region(ports->start, resource_size(ports),
740 driver_name);
741 if (!ports) {
742 dev_dbg(dev, "i/o registers already in use\n");
743 return -EBUSY;
744 }
745
746 cmos_rtc.irq = rtc_irq;
747 cmos_rtc.iomem = ports;
748
749 /* Heuristic to deduce NVRAM size ... do what the legacy NVRAM
750 * driver did, but don't reject unknown configs. Old hardware
751 * won't address 128 bytes. Newer chips have multiple banks,
752 * though they may not be listed in one I/O resource.
753 */
754#if defined(CONFIG_ATARI)
755 address_space = 64;
756#elif defined(__i386__) || defined(__x86_64__) || defined(__arm__) \
757 || defined(__sparc__) || defined(__mips__) \
758 || defined(__powerpc__)
759 address_space = 128;
760#else
761#warning Assuming 128 bytes of RTC+NVRAM address space, not 64 bytes.
762 address_space = 128;
763#endif
764 if (can_bank2 && ports->end > (ports->start + 1))
765 address_space = 256;
766
767 /* For ACPI systems extension info comes from the FADT. On others,
768 * board specific setup provides it as appropriate. Systems where
769 * the alarm IRQ isn't automatically a wakeup IRQ (like ACPI, and
770 * some almost-clones) can provide hooks to make that behave.
771 *
772 * Note that ACPI doesn't preclude putting these registers into
773 * "extended" areas of the chip, including some that we won't yet
774 * expect CMOS_READ and friends to handle.
775 */
776 if (info) {
777 if (info->flags)
778 flags = info->flags;
779 if (info->address_space)
780 address_space = info->address_space;
781
782 if (info->rtc_day_alarm && info->rtc_day_alarm < 128)
783 cmos_rtc.day_alrm = info->rtc_day_alarm;
784 if (info->rtc_mon_alarm && info->rtc_mon_alarm < 128)
785 cmos_rtc.mon_alrm = info->rtc_mon_alarm;
786 if (info->rtc_century && info->rtc_century < 128)
787 cmos_rtc.century = info->rtc_century;
788
789 if (info->wake_on && info->wake_off) {
790 cmos_rtc.wake_on = info->wake_on;
791 cmos_rtc.wake_off = info->wake_off;
792 }
793 }
794
795 cmos_rtc.dev = dev;
796 dev_set_drvdata(dev, &cmos_rtc);
797
798 cmos_rtc.rtc = devm_rtc_allocate_device(dev);
799 if (IS_ERR(cmos_rtc.rtc)) {
800 retval = PTR_ERR(cmos_rtc.rtc);
801 goto cleanup0;
802 }
803
804 rename_region(ports, dev_name(&cmos_rtc.rtc->dev));
805
806 spin_lock_irq(&rtc_lock);
807
808 if (!(flags & CMOS_RTC_FLAGS_NOFREQ)) {
809 /* force periodic irq to CMOS reset default of 1024Hz;
810 *
811 * REVISIT it's been reported that at least one x86_64 ALI
812 * mobo doesn't use 32KHz here ... for portability we might
813 * need to do something about other clock frequencies.
814 */
815 cmos_rtc.rtc->irq_freq = 1024;
816 if (use_hpet_alarm())
817 hpet_set_periodic_freq(cmos_rtc.rtc->irq_freq);
818 CMOS_WRITE(RTC_REF_CLCK_32KHZ | 0x06, RTC_FREQ_SELECT);
819 }
820
821 /* disable irqs */
822 if (is_valid_irq(rtc_irq))
823 cmos_irq_disable(&cmos_rtc, RTC_PIE | RTC_AIE | RTC_UIE);
824
825 rtc_control = CMOS_READ(RTC_CONTROL);
826
827 spin_unlock_irq(&rtc_lock);
828
829 if (is_valid_irq(rtc_irq) && !(rtc_control & RTC_24H)) {
830 dev_warn(dev, "only 24-hr supported\n");
831 retval = -ENXIO;
832 goto cleanup1;
833 }
834
835 if (use_hpet_alarm())
836 hpet_rtc_timer_init();
837
838 if (is_valid_irq(rtc_irq)) {
839 irq_handler_t rtc_cmos_int_handler;
840
841 if (use_hpet_alarm()) {
842 rtc_cmos_int_handler = hpet_rtc_interrupt;
843 retval = hpet_register_irq_handler(cmos_interrupt);
844 if (retval) {
845 hpet_mask_rtc_irq_bit(RTC_IRQMASK);
846 dev_warn(dev, "hpet_register_irq_handler "
847 " failed in rtc_init().");
848 goto cleanup1;
849 }
850 } else
851 rtc_cmos_int_handler = cmos_interrupt;
852
853 retval = request_irq(rtc_irq, rtc_cmos_int_handler,
854 0, dev_name(&cmos_rtc.rtc->dev),
855 cmos_rtc.rtc);
856 if (retval < 0) {
857 dev_dbg(dev, "IRQ %d is already in use\n", rtc_irq);
858 goto cleanup1;
859 }
860
861 cmos_rtc.rtc->ops = &cmos_rtc_ops;
862 } else {
863 cmos_rtc.rtc->ops = &cmos_rtc_ops_no_alarm;
864 }
865
866 cmos_rtc.rtc->nvram_old_abi = true;
867 retval = rtc_register_device(cmos_rtc.rtc);
868 if (retval)
869 goto cleanup2;
870
871 /* export at least the first block of NVRAM */
872 nvmem_cfg.size = address_space - NVRAM_OFFSET;
873 if (rtc_nvmem_register(cmos_rtc.rtc, &nvmem_cfg))
874 dev_err(dev, "nvmem registration failed\n");
875
876 dev_info(dev, "%s%s, %d bytes nvram%s\n",
877 !is_valid_irq(rtc_irq) ? "no alarms" :
878 cmos_rtc.mon_alrm ? "alarms up to one year" :
879 cmos_rtc.day_alrm ? "alarms up to one month" :
880 "alarms up to one day",
881 cmos_rtc.century ? ", y3k" : "",
882 nvmem_cfg.size,
883 use_hpet_alarm() ? ", hpet irqs" : "");
884
885 return 0;
886
887cleanup2:
888 if (is_valid_irq(rtc_irq))
889 free_irq(rtc_irq, cmos_rtc.rtc);
890cleanup1:
891 cmos_rtc.dev = NULL;
892cleanup0:
893 if (RTC_IOMAPPED)
894 release_region(ports->start, resource_size(ports));
895 else
896 release_mem_region(ports->start, resource_size(ports));
897 return retval;
898}
899
900static void cmos_do_shutdown(int rtc_irq)
901{
902 spin_lock_irq(&rtc_lock);
903 if (is_valid_irq(rtc_irq))
904 cmos_irq_disable(&cmos_rtc, RTC_IRQMASK);
905 spin_unlock_irq(&rtc_lock);
906}
907
908static void cmos_do_remove(struct device *dev)
909{
910 struct cmos_rtc *cmos = dev_get_drvdata(dev);
911 struct resource *ports;
912
913 cmos_do_shutdown(cmos->irq);
914
915 if (is_valid_irq(cmos->irq)) {
916 free_irq(cmos->irq, cmos->rtc);
917 if (use_hpet_alarm())
918 hpet_unregister_irq_handler(cmos_interrupt);
919 }
920
921 cmos->rtc = NULL;
922
923 ports = cmos->iomem;
924 if (RTC_IOMAPPED)
925 release_region(ports->start, resource_size(ports));
926 else
927 release_mem_region(ports->start, resource_size(ports));
928 cmos->iomem = NULL;
929
930 cmos->dev = NULL;
931}
932
933static int cmos_aie_poweroff(struct device *dev)
934{
935 struct cmos_rtc *cmos = dev_get_drvdata(dev);
936 struct rtc_time now;
937 time64_t t_now;
938 int retval = 0;
939 unsigned char rtc_control;
940
941 if (!cmos->alarm_expires)
942 return -EINVAL;
943
944 spin_lock_irq(&rtc_lock);
945 rtc_control = CMOS_READ(RTC_CONTROL);
946 spin_unlock_irq(&rtc_lock);
947
948 /* We only care about the situation where AIE is disabled. */
949 if (rtc_control & RTC_AIE)
950 return -EBUSY;
951
952 cmos_read_time(dev, &now);
953 t_now = rtc_tm_to_time64(&now);
954
955 /*
956 * When enabling "RTC wake-up" in BIOS setup, the machine reboots
957 * automatically right after shutdown on some buggy boxes.
958 * This automatic rebooting issue won't happen when the alarm
959 * time is larger than now+1 seconds.
960 *
961 * If the alarm time is equal to now+1 seconds, the issue can be
962 * prevented by cancelling the alarm.
963 */
964 if (cmos->alarm_expires == t_now + 1) {
965 struct rtc_wkalrm alarm;
966
967 /* Cancel the AIE timer by configuring the past time. */
968 rtc_time64_to_tm(t_now - 1, &alarm.time);
969 alarm.enabled = 0;
970 retval = cmos_set_alarm(dev, &alarm);
971 } else if (cmos->alarm_expires > t_now + 1) {
972 retval = -EBUSY;
973 }
974
975 return retval;
976}
977
978static int cmos_suspend(struct device *dev)
979{
980 struct cmos_rtc *cmos = dev_get_drvdata(dev);
981 unsigned char tmp;
982
983 /* only the alarm might be a wakeup event source */
984 spin_lock_irq(&rtc_lock);
985 cmos->suspend_ctrl = tmp = CMOS_READ(RTC_CONTROL);
986 if (tmp & (RTC_PIE|RTC_AIE|RTC_UIE)) {
987 unsigned char mask;
988
989 if (device_may_wakeup(dev))
990 mask = RTC_IRQMASK & ~RTC_AIE;
991 else
992 mask = RTC_IRQMASK;
993 tmp &= ~mask;
994 CMOS_WRITE(tmp, RTC_CONTROL);
995 if (use_hpet_alarm())
996 hpet_mask_rtc_irq_bit(mask);
997 cmos_checkintr(cmos, tmp);
998 }
999 spin_unlock_irq(&rtc_lock);
1000
1001 if ((tmp & RTC_AIE) && !cmos_use_acpi_alarm()) {
1002 cmos->enabled_wake = 1;
1003 if (cmos->wake_on)
1004 cmos->wake_on(dev);
1005 else
1006 enable_irq_wake(cmos->irq);
1007 }
1008
1009 cmos_read_alarm(dev, &cmos->saved_wkalrm);
1010
1011 dev_dbg(dev, "suspend%s, ctrl %02x\n",
1012 (tmp & RTC_AIE) ? ", alarm may wake" : "",
1013 tmp);
1014
1015 return 0;
1016}
1017
1018/* We want RTC alarms to wake us from e.g. ACPI G2/S5 "soft off", even
1019 * after a detour through G3 "mechanical off", although the ACPI spec
1020 * says wakeup should only work from G1/S4 "hibernate". To most users,
1021 * distinctions between S4 and S5 are pointless. So when the hardware
1022 * allows, don't draw that distinction.
1023 */
1024static inline int cmos_poweroff(struct device *dev)
1025{
1026 if (!IS_ENABLED(CONFIG_PM))
1027 return -ENOSYS;
1028
1029 return cmos_suspend(dev);
1030}
1031
1032static void cmos_check_wkalrm(struct device *dev)
1033{
1034 struct cmos_rtc *cmos = dev_get_drvdata(dev);
1035 struct rtc_wkalrm current_alarm;
1036 time64_t t_now;
1037 time64_t t_current_expires;
1038 time64_t t_saved_expires;
1039 struct rtc_time now;
1040
1041 /* Check if we have RTC Alarm armed */
1042 if (!(cmos->suspend_ctrl & RTC_AIE))
1043 return;
1044
1045 cmos_read_time(dev, &now);
1046 t_now = rtc_tm_to_time64(&now);
1047
1048 /*
1049 * ACPI RTC wake event is cleared after resume from STR,
1050 * ACK the rtc irq here
1051 */
1052 if (t_now >= cmos->alarm_expires && cmos_use_acpi_alarm()) {
1053 cmos_interrupt(0, (void *)cmos->rtc);
1054 return;
1055 }
1056
1057 cmos_read_alarm(dev, ¤t_alarm);
1058 t_current_expires = rtc_tm_to_time64(¤t_alarm.time);
1059 t_saved_expires = rtc_tm_to_time64(&cmos->saved_wkalrm.time);
1060 if (t_current_expires != t_saved_expires ||
1061 cmos->saved_wkalrm.enabled != current_alarm.enabled) {
1062 cmos_set_alarm(dev, &cmos->saved_wkalrm);
1063 }
1064}
1065
1066static void cmos_check_acpi_rtc_status(struct device *dev,
1067 unsigned char *rtc_control);
1068
1069static int __maybe_unused cmos_resume(struct device *dev)
1070{
1071 struct cmos_rtc *cmos = dev_get_drvdata(dev);
1072 unsigned char tmp;
1073
1074 if (cmos->enabled_wake && !cmos_use_acpi_alarm()) {
1075 if (cmos->wake_off)
1076 cmos->wake_off(dev);
1077 else
1078 disable_irq_wake(cmos->irq);
1079 cmos->enabled_wake = 0;
1080 }
1081
1082 /* The BIOS might have changed the alarm, restore it */
1083 cmos_check_wkalrm(dev);
1084
1085 spin_lock_irq(&rtc_lock);
1086 tmp = cmos->suspend_ctrl;
1087 cmos->suspend_ctrl = 0;
1088 /* re-enable any irqs previously active */
1089 if (tmp & RTC_IRQMASK) {
1090 unsigned char mask;
1091
1092 if (device_may_wakeup(dev) && use_hpet_alarm())
1093 hpet_rtc_timer_init();
1094
1095 do {
1096 CMOS_WRITE(tmp, RTC_CONTROL);
1097 if (use_hpet_alarm())
1098 hpet_set_rtc_irq_bit(tmp & RTC_IRQMASK);
1099
1100 mask = CMOS_READ(RTC_INTR_FLAGS);
1101 mask &= (tmp & RTC_IRQMASK) | RTC_IRQF;
1102 if (!use_hpet_alarm() || !is_intr(mask))
1103 break;
1104
1105 /* force one-shot behavior if HPET blocked
1106 * the wake alarm's irq
1107 */
1108 rtc_update_irq(cmos->rtc, 1, mask);
1109 tmp &= ~RTC_AIE;
1110 hpet_mask_rtc_irq_bit(RTC_AIE);
1111 } while (mask & RTC_AIE);
1112
1113 if (tmp & RTC_AIE)
1114 cmos_check_acpi_rtc_status(dev, &tmp);
1115 }
1116 spin_unlock_irq(&rtc_lock);
1117
1118 dev_dbg(dev, "resume, ctrl %02x\n", tmp);
1119
1120 return 0;
1121}
1122
1123static SIMPLE_DEV_PM_OPS(cmos_pm_ops, cmos_suspend, cmos_resume);
1124
1125/*----------------------------------------------------------------*/
1126
1127/* On non-x86 systems, a "CMOS" RTC lives most naturally on platform_bus.
1128 * ACPI systems always list these as PNPACPI devices, and pre-ACPI PCs
1129 * probably list them in similar PNPBIOS tables; so PNP is more common.
1130 *
1131 * We don't use legacy "poke at the hardware" probing. Ancient PCs that
1132 * predate even PNPBIOS should set up platform_bus devices.
1133 */
1134
1135#ifdef CONFIG_ACPI
1136
1137#include <linux/acpi.h>
1138
1139static u32 rtc_handler(void *context)
1140{
1141 struct device *dev = context;
1142 struct cmos_rtc *cmos = dev_get_drvdata(dev);
1143 unsigned char rtc_control = 0;
1144 unsigned char rtc_intr;
1145 unsigned long flags;
1146
1147
1148 /*
1149 * Always update rtc irq when ACPI is used as RTC Alarm.
1150 * Or else, ACPI SCI is enabled during suspend/resume only,
1151 * update rtc irq in that case.
1152 */
1153 if (cmos_use_acpi_alarm())
1154 cmos_interrupt(0, (void *)cmos->rtc);
1155 else {
1156 /* Fix me: can we use cmos_interrupt() here as well? */
1157 spin_lock_irqsave(&rtc_lock, flags);
1158 if (cmos_rtc.suspend_ctrl)
1159 rtc_control = CMOS_READ(RTC_CONTROL);
1160 if (rtc_control & RTC_AIE) {
1161 cmos_rtc.suspend_ctrl &= ~RTC_AIE;
1162 CMOS_WRITE(rtc_control, RTC_CONTROL);
1163 rtc_intr = CMOS_READ(RTC_INTR_FLAGS);
1164 rtc_update_irq(cmos->rtc, 1, rtc_intr);
1165 }
1166 spin_unlock_irqrestore(&rtc_lock, flags);
1167 }
1168
1169 pm_wakeup_hard_event(dev);
1170 acpi_clear_event(ACPI_EVENT_RTC);
1171 acpi_disable_event(ACPI_EVENT_RTC, 0);
1172 return ACPI_INTERRUPT_HANDLED;
1173}
1174
1175static inline void rtc_wake_setup(struct device *dev)
1176{
1177 acpi_install_fixed_event_handler(ACPI_EVENT_RTC, rtc_handler, dev);
1178 /*
1179 * After the RTC handler is installed, the Fixed_RTC event should
1180 * be disabled. Only when the RTC alarm is set will it be enabled.
1181 */
1182 acpi_clear_event(ACPI_EVENT_RTC);
1183 acpi_disable_event(ACPI_EVENT_RTC, 0);
1184}
1185
1186static void rtc_wake_on(struct device *dev)
1187{
1188 acpi_clear_event(ACPI_EVENT_RTC);
1189 acpi_enable_event(ACPI_EVENT_RTC, 0);
1190}
1191
1192static void rtc_wake_off(struct device *dev)
1193{
1194 acpi_disable_event(ACPI_EVENT_RTC, 0);
1195}
1196
1197#ifdef CONFIG_X86
1198/* Enable use_acpi_alarm mode for Intel platforms no earlier than 2015 */
1199static void use_acpi_alarm_quirks(void)
1200{
1201 if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL)
1202 return;
1203
1204 if (!(acpi_gbl_FADT.flags & ACPI_FADT_LOW_POWER_S0))
1205 return;
1206
1207 if (!is_hpet_enabled())
1208 return;
1209
1210 if (dmi_get_bios_year() < 2015)
1211 return;
1212
1213 use_acpi_alarm = true;
1214}
1215#else
1216static inline void use_acpi_alarm_quirks(void) { }
1217#endif
1218
1219/* Every ACPI platform has a mc146818 compatible "cmos rtc". Here we find
1220 * its device node and pass extra config data. This helps its driver use
1221 * capabilities that the now-obsolete mc146818 didn't have, and informs it
1222 * that this board's RTC is wakeup-capable (per ACPI spec).
1223 */
1224static struct cmos_rtc_board_info acpi_rtc_info;
1225
1226static void cmos_wake_setup(struct device *dev)
1227{
1228 if (acpi_disabled)
1229 return;
1230
1231 use_acpi_alarm_quirks();
1232
1233 rtc_wake_setup(dev);
1234 acpi_rtc_info.wake_on = rtc_wake_on;
1235 acpi_rtc_info.wake_off = rtc_wake_off;
1236
1237 /* workaround bug in some ACPI tables */
1238 if (acpi_gbl_FADT.month_alarm && !acpi_gbl_FADT.day_alarm) {
1239 dev_dbg(dev, "bogus FADT month_alarm (%d)\n",
1240 acpi_gbl_FADT.month_alarm);
1241 acpi_gbl_FADT.month_alarm = 0;
1242 }
1243
1244 acpi_rtc_info.rtc_day_alarm = acpi_gbl_FADT.day_alarm;
1245 acpi_rtc_info.rtc_mon_alarm = acpi_gbl_FADT.month_alarm;
1246 acpi_rtc_info.rtc_century = acpi_gbl_FADT.century;
1247
1248 /* NOTE: S4_RTC_WAKE is NOT currently useful to Linux */
1249 if (acpi_gbl_FADT.flags & ACPI_FADT_S4_RTC_WAKE)
1250 dev_info(dev, "RTC can wake from S4\n");
1251
1252 dev->platform_data = &acpi_rtc_info;
1253
1254 /* RTC always wakes from S1/S2/S3, and often S4/STD */
1255 device_init_wakeup(dev, 1);
1256}
1257
1258static void cmos_check_acpi_rtc_status(struct device *dev,
1259 unsigned char *rtc_control)
1260{
1261 struct cmos_rtc *cmos = dev_get_drvdata(dev);
1262 acpi_event_status rtc_status;
1263 acpi_status status;
1264
1265 if (acpi_gbl_FADT.flags & ACPI_FADT_FIXED_RTC)
1266 return;
1267
1268 status = acpi_get_event_status(ACPI_EVENT_RTC, &rtc_status);
1269 if (ACPI_FAILURE(status)) {
1270 dev_err(dev, "Could not get RTC status\n");
1271 } else if (rtc_status & ACPI_EVENT_FLAG_SET) {
1272 unsigned char mask;
1273 *rtc_control &= ~RTC_AIE;
1274 CMOS_WRITE(*rtc_control, RTC_CONTROL);
1275 mask = CMOS_READ(RTC_INTR_FLAGS);
1276 rtc_update_irq(cmos->rtc, 1, mask);
1277 }
1278}
1279
1280#else
1281
1282static void cmos_wake_setup(struct device *dev)
1283{
1284}
1285
1286static void cmos_check_acpi_rtc_status(struct device *dev,
1287 unsigned char *rtc_control)
1288{
1289}
1290
1291#endif
1292
1293#ifdef CONFIG_PNP
1294
1295#include <linux/pnp.h>
1296
1297static int cmos_pnp_probe(struct pnp_dev *pnp, const struct pnp_device_id *id)
1298{
1299 cmos_wake_setup(&pnp->dev);
1300
1301 if (pnp_port_start(pnp, 0) == 0x70 && !pnp_irq_valid(pnp, 0)) {
1302 unsigned int irq = 0;
1303#ifdef CONFIG_X86
1304 /* Some machines contain a PNP entry for the RTC, but
1305 * don't define the IRQ. It should always be safe to
1306 * hardcode it on systems with a legacy PIC.
1307 */
1308 if (nr_legacy_irqs())
1309 irq = RTC_IRQ;
1310#endif
1311 return cmos_do_probe(&pnp->dev,
1312 pnp_get_resource(pnp, IORESOURCE_IO, 0), irq);
1313 } else {
1314 return cmos_do_probe(&pnp->dev,
1315 pnp_get_resource(pnp, IORESOURCE_IO, 0),
1316 pnp_irq(pnp, 0));
1317 }
1318}
1319
1320static void cmos_pnp_remove(struct pnp_dev *pnp)
1321{
1322 cmos_do_remove(&pnp->dev);
1323}
1324
1325static void cmos_pnp_shutdown(struct pnp_dev *pnp)
1326{
1327 struct device *dev = &pnp->dev;
1328 struct cmos_rtc *cmos = dev_get_drvdata(dev);
1329
1330 if (system_state == SYSTEM_POWER_OFF) {
1331 int retval = cmos_poweroff(dev);
1332
1333 if (cmos_aie_poweroff(dev) < 0 && !retval)
1334 return;
1335 }
1336
1337 cmos_do_shutdown(cmos->irq);
1338}
1339
1340static const struct pnp_device_id rtc_ids[] = {
1341 { .id = "PNP0b00", },
1342 { .id = "PNP0b01", },
1343 { .id = "PNP0b02", },
1344 { },
1345};
1346MODULE_DEVICE_TABLE(pnp, rtc_ids);
1347
1348static struct pnp_driver cmos_pnp_driver = {
1349 .name = driver_name,
1350 .id_table = rtc_ids,
1351 .probe = cmos_pnp_probe,
1352 .remove = cmos_pnp_remove,
1353 .shutdown = cmos_pnp_shutdown,
1354
1355 /* flag ensures resume() gets called, and stops syslog spam */
1356 .flags = PNP_DRIVER_RES_DO_NOT_CHANGE,
1357 .driver = {
1358 .pm = &cmos_pm_ops,
1359 },
1360};
1361
1362#endif /* CONFIG_PNP */
1363
1364#ifdef CONFIG_OF
1365static const struct of_device_id of_cmos_match[] = {
1366 {
1367 .compatible = "motorola,mc146818",
1368 },
1369 { },
1370};
1371MODULE_DEVICE_TABLE(of, of_cmos_match);
1372
1373static __init void cmos_of_init(struct platform_device *pdev)
1374{
1375 struct device_node *node = pdev->dev.of_node;
1376 const __be32 *val;
1377
1378 if (!node)
1379 return;
1380
1381 val = of_get_property(node, "ctrl-reg", NULL);
1382 if (val)
1383 CMOS_WRITE(be32_to_cpup(val), RTC_CONTROL);
1384
1385 val = of_get_property(node, "freq-reg", NULL);
1386 if (val)
1387 CMOS_WRITE(be32_to_cpup(val), RTC_FREQ_SELECT);
1388}
1389#else
1390static inline void cmos_of_init(struct platform_device *pdev) {}
1391#endif
1392/*----------------------------------------------------------------*/
1393
1394/* Platform setup should have set up an RTC device, when PNP is
1395 * unavailable ... this could happen even on (older) PCs.
1396 */
1397
1398static int __init cmos_platform_probe(struct platform_device *pdev)
1399{
1400 struct resource *resource;
1401 int irq;
1402
1403 cmos_of_init(pdev);
1404 cmos_wake_setup(&pdev->dev);
1405
1406 if (RTC_IOMAPPED)
1407 resource = platform_get_resource(pdev, IORESOURCE_IO, 0);
1408 else
1409 resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1410 irq = platform_get_irq(pdev, 0);
1411 if (irq < 0)
1412 irq = -1;
1413
1414 return cmos_do_probe(&pdev->dev, resource, irq);
1415}
1416
1417static int cmos_platform_remove(struct platform_device *pdev)
1418{
1419 cmos_do_remove(&pdev->dev);
1420 return 0;
1421}
1422
1423static void cmos_platform_shutdown(struct platform_device *pdev)
1424{
1425 struct device *dev = &pdev->dev;
1426 struct cmos_rtc *cmos = dev_get_drvdata(dev);
1427
1428 if (system_state == SYSTEM_POWER_OFF) {
1429 int retval = cmos_poweroff(dev);
1430
1431 if (cmos_aie_poweroff(dev) < 0 && !retval)
1432 return;
1433 }
1434
1435 cmos_do_shutdown(cmos->irq);
1436}
1437
1438/* work with hotplug and coldplug */
1439MODULE_ALIAS("platform:rtc_cmos");
1440
1441static struct platform_driver cmos_platform_driver = {
1442 .remove = cmos_platform_remove,
1443 .shutdown = cmos_platform_shutdown,
1444 .driver = {
1445 .name = driver_name,
1446 .pm = &cmos_pm_ops,
1447 .of_match_table = of_match_ptr(of_cmos_match),
1448 }
1449};
1450
1451#ifdef CONFIG_PNP
1452static bool pnp_driver_registered;
1453#endif
1454static bool platform_driver_registered;
1455
1456static int __init cmos_init(void)
1457{
1458 int retval = 0;
1459
1460#ifdef CONFIG_PNP
1461 retval = pnp_register_driver(&cmos_pnp_driver);
1462 if (retval == 0)
1463 pnp_driver_registered = true;
1464#endif
1465
1466 if (!cmos_rtc.dev) {
1467 retval = platform_driver_probe(&cmos_platform_driver,
1468 cmos_platform_probe);
1469 if (retval == 0)
1470 platform_driver_registered = true;
1471 }
1472
1473 if (retval == 0)
1474 return 0;
1475
1476#ifdef CONFIG_PNP
1477 if (pnp_driver_registered)
1478 pnp_unregister_driver(&cmos_pnp_driver);
1479#endif
1480 return retval;
1481}
1482module_init(cmos_init);
1483
1484static void __exit cmos_exit(void)
1485{
1486#ifdef CONFIG_PNP
1487 if (pnp_driver_registered)
1488 pnp_unregister_driver(&cmos_pnp_driver);
1489#endif
1490 if (platform_driver_registered)
1491 platform_driver_unregister(&cmos_platform_driver);
1492}
1493module_exit(cmos_exit);
1494
1495
1496MODULE_AUTHOR("David Brownell");
1497MODULE_DESCRIPTION("Driver for PC-style 'CMOS' RTCs");
1498MODULE_LICENSE("GPL");