Loading...
1#
2# USB Serial device configuration
3#
4
5menuconfig USB_SERIAL
6 tristate "USB Serial Converter support"
7 depends on TTY
8 ---help---
9 Say Y here if you have a USB device that provides normal serial
10 ports, or acts like a serial device, and you want to connect it to
11 your USB bus.
12
13 Please read <file:Documentation/usb/usb-serial.txt> for more
14 information on the specifics of the different devices that are
15 supported, and on how to use them.
16
17 To compile this driver as a module, choose M here: the
18 module will be called usbserial.
19
20if USB_SERIAL
21
22config USB_SERIAL_CONSOLE
23 bool "USB Serial Console device support"
24 depends on USB_SERIAL=y
25 ---help---
26 If you say Y here, it will be possible to use a USB to serial
27 converter port as the system console (the system console is the
28 device which receives all kernel messages and warnings and which
29 allows logins in single user mode). This could be useful if some
30 terminal or printer is connected to that serial port.
31
32 Even if you say Y here, the currently visible virtual console
33 (/dev/tty0) will still be used as the system console by default, but
34 you can alter that using a kernel command line option such as
35 "console=ttyUSB0". (Try "man bootparam" or see the documentation of
36 your boot loader (lilo or loadlin) about how to pass options to the
37 kernel at boot time.)
38
39 If you don't have a VGA card installed and you say Y here, the
40 kernel will automatically use the first USB to serial converter
41 port, /dev/ttyUSB0, as system console.
42
43 If unsure, say N.
44
45config USB_SERIAL_GENERIC
46 bool "USB Generic Serial Driver"
47 help
48 Say Y here if you want to use the generic USB serial driver. Please
49 read <file:Documentation/usb/usb-serial.txt> for more information on
50 using this driver. It is recommended that the "USB Serial converter
51 support" be compiled as a module for this driver to be used
52 properly.
53
54config USB_SERIAL_SIMPLE
55 tristate "USB Serial Simple Driver"
56 help
57 Say Y here to use the USB serial "simple" driver. This driver
58 handles a wide range of very simple devices, all in one
59 driver. Specifically, it supports:
60 - Suunto ANT+ USB device.
61 - Medtronic CareLink USB device
62 - Fundamental Software dongle.
63 - Google USB serial devices
64 - HP4x calculators
65 - a number of Motorola phones
66 - Novatel Wireless GPS receivers
67 - Siemens USB/MPI adapter.
68 - ViVOtech ViVOpay USB device.
69 - Infineon Modem Flashloader USB interface
70 - ZIO Motherboard USB serial interface
71
72 To compile this driver as a module, choose M here: the module
73 will be called usb-serial-simple.
74
75config USB_SERIAL_AIRCABLE
76 tristate "USB AIRcable Bluetooth Dongle Driver"
77 help
78 Say Y here if you want to use USB AIRcable Bluetooth Dongle.
79
80 To compile this driver as a module, choose M here: the module
81 will be called aircable.
82
83config USB_SERIAL_ARK3116
84 tristate "USB ARK Micro 3116 USB Serial Driver"
85 help
86 Say Y here if you want to use a ARK Micro 3116 USB to Serial
87 device.
88
89 To compile this driver as a module, choose M here: the
90 module will be called ark3116
91
92config USB_SERIAL_BELKIN
93 tristate "USB Belkin and Peracom Single Port Serial Driver"
94 help
95 Say Y here if you want to use a Belkin USB Serial single port
96 adaptor (F5U103 is one of the model numbers) or the Peracom single
97 port USB to serial adapter.
98
99 To compile this driver as a module, choose M here: the
100 module will be called belkin_sa.
101
102config USB_SERIAL_CH341
103 tristate "USB Winchiphead CH341 Single Port Serial Driver"
104 help
105 Say Y here if you want to use a Winchiphead CH341 single port
106 USB to serial adapter.
107
108 To compile this driver as a module, choose M here: the
109 module will be called ch341.
110
111config USB_SERIAL_WHITEHEAT
112 tristate "USB ConnectTech WhiteHEAT Serial Driver"
113 select USB_EZUSB_FX2
114 help
115 Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
116 USB to serial converter device.
117
118 To compile this driver as a module, choose M here: the
119 module will be called whiteheat.
120
121config USB_SERIAL_DIGI_ACCELEPORT
122 tristate "USB Digi International AccelePort USB Serial Driver"
123 ---help---
124 Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
125 2 port (plus parallel port) and 4 port USB serial converters. The
126 parallel port on the USB 2 appears as a third serial port on Linux.
127 The Digi Acceleport USB 8 is not yet supported by this driver.
128
129 This driver works under SMP with the usb-uhci driver. It does not
130 work under SMP with the uhci driver.
131
132 To compile this driver as a module, choose M here: the
133 module will be called digi_acceleport.
134
135config USB_SERIAL_CP210X
136 tristate "USB CP210x family of UART Bridge Controllers"
137 help
138 Say Y here if you want to use a CP2101/CP2102/CP2103 based USB
139 to RS232 converters.
140
141 To compile this driver as a module, choose M here: the
142 module will be called cp210x.
143
144config USB_SERIAL_CYPRESS_M8
145 tristate "USB Cypress M8 USB Serial Driver"
146 help
147 Say Y here if you want to use a device that contains the Cypress
148 USB to Serial microcontroller, such as the DeLorme Earthmate GPS.
149
150 Attempted SMP support... send bug reports!
151
152 Supported microcontrollers in the CY4601 family are:
153 CY7C63741 CY7C63742 CY7C63743 CY7C64013
154
155 To compile this driver as a module, choose M here: the
156 module will be called cypress_m8.
157
158config USB_SERIAL_EMPEG
159 tristate "USB Empeg empeg-car Mark I/II Driver"
160 help
161 Say Y here if you want to connect to your Empeg empeg-car Mark I/II
162 mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...}
163 device node. See <file:Documentation/usb/usb-serial.txt> for more
164 tidbits of information.
165
166 To compile this driver as a module, choose M here: the
167 module will be called empeg.
168
169config USB_SERIAL_FTDI_SIO
170 tristate "USB FTDI Single Port Serial Driver"
171 ---help---
172 Say Y here if you want to use a FTDI SIO single port USB to serial
173 converter device. The implementation I have is called the USC-1000.
174 This driver has also been tested with the 245 and 232 devices.
175
176 See <http://ftdi-usb-sio.sourceforge.net/> for more
177 information on this driver and the device.
178
179 To compile this driver as a module, choose M here: the
180 module will be called ftdi_sio.
181
182config USB_SERIAL_VISOR
183 tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
184 help
185 Say Y here if you want to connect to your HandSpring Visor, Palm
186 m500 or m505 through its USB docking station. See
187 <http://usbvisor.sourceforge.net/index.php3> for more information on using this
188 driver.
189
190 To compile this driver as a module, choose M here: the
191 module will be called visor.
192
193config USB_SERIAL_IPAQ
194 tristate "USB PocketPC PDA Driver"
195 help
196 Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
197 or any other PDA running Windows CE 3.0 or PocketPC 2002
198 using a USB cradle/cable. For information on using the driver,
199 read <file:Documentation/usb/usb-serial.txt>.
200
201 To compile this driver as a module, choose M here: the
202 module will be called ipaq.
203
204config USB_SERIAL_IR
205 tristate "USB IR Dongle Serial Driver"
206 help
207 Say Y here if you want to enable simple serial support for USB IrDA
208 devices. This is useful if you do not want to use the full IrDA
209 stack.
210
211 To compile this driver as a module, choose M here: the
212 module will be called ir-usb.
213
214config USB_SERIAL_EDGEPORT
215 tristate "USB Inside Out Edgeport Serial Driver"
216 ---help---
217 Say Y here if you want to use any of the following devices from
218 Inside Out Networks (Digi):
219 Edgeport/4
220 Rapidport/4
221 Edgeport/4t
222 Edgeport/2
223 Edgeport/4i
224 Edgeport/2i
225 Edgeport/421
226 Edgeport/21
227 Edgeport/8
228 Edgeport/8 Dual
229 Edgeport/2D8
230 Edgeport/4D8
231 Edgeport/8i
232 Edgeport/2 DIN
233 Edgeport/4 DIN
234 Edgeport/16 Dual
235
236 To compile this driver as a module, choose M here: the
237 module will be called io_edgeport.
238
239config USB_SERIAL_EDGEPORT_TI
240 tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
241 help
242 Say Y here if you want to use any of the devices from Inside Out
243 Networks (Digi) that are not supported by the io_edgeport driver.
244 This includes the Edgeport/1 device.
245
246 To compile this driver as a module, choose M here: the
247 module will be called io_ti.
248
249config USB_SERIAL_F81232
250 tristate "USB Fintek F81232 Single Port Serial Driver"
251 help
252 Say Y here if you want to use the Fintek F81232 single
253 port usb to serial adapter.
254
255 To compile this driver as a module, choose M here: the
256 module will be called f81232.
257
258config USB_SERIAL_GARMIN
259 tristate "USB Garmin GPS driver"
260 help
261 Say Y here if you want to connect to your Garmin GPS.
262 Should work with most Garmin GPS devices which have a native USB port.
263
264 See <http://sourceforge.net/projects/garmin-gps> for the latest
265 version of the driver.
266
267 To compile this driver as a module, choose M here: the
268 module will be called garmin_gps.
269
270config USB_SERIAL_IPW
271 tristate "USB IPWireless (3G UMTS TDD) Driver"
272 select USB_SERIAL_WWAN
273 help
274 Say Y here if you want to use a IPWireless USB modem such as
275 the ones supplied by Axity3G/Sentech South Africa.
276
277 To compile this driver as a module, choose M here: the
278 module will be called ipw.
279
280config USB_SERIAL_IUU
281 tristate "USB Infinity USB Unlimited Phoenix Driver"
282 help
283 Say Y here if you want to use a IUU in phoenix mode and get
284 an extra ttyUSBx device. More information available on
285 http://eczema.ecze.com/iuu_phoenix.html
286
287 To compile this driver as a module, choose M here: the
288 module will be called iuu_phoenix.o
289
290config USB_SERIAL_KEYSPAN_PDA
291 tristate "USB Keyspan PDA Single Port Serial Driver"
292 select USB_EZUSB_FX2
293 help
294 Say Y here if you want to use a Keyspan PDA single port USB to
295 serial converter device. This driver makes use of firmware
296 developed from scratch by Brian Warner.
297
298 To compile this driver as a module, choose M here: the
299 module will be called keyspan_pda.
300
301config USB_SERIAL_KEYSPAN
302 tristate "USB Keyspan USA-xxx Serial Driver"
303 select USB_EZUSB_FX2
304 ---help---
305 Say Y here if you want to use Keyspan USB to serial converter
306 devices. This driver makes use of Keyspan's official firmware
307 and was developed with their support. You must also include
308 firmware to support your particular device(s).
309
310 See <http://blemings.org/hugh/keyspan.html> for more information.
311
312 To compile this driver as a module, choose M here: the
313 module will be called keyspan.
314
315config USB_SERIAL_KEYSPAN_MPR
316 bool "USB Keyspan MPR Firmware"
317 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
318 help
319 Say Y here to include firmware for the Keyspan MPR converter.
320
321config USB_SERIAL_KEYSPAN_USA28
322 bool "USB Keyspan USA-28 Firmware"
323 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
324 help
325 Say Y here to include firmware for the USA-28 converter.
326
327config USB_SERIAL_KEYSPAN_USA28X
328 bool "USB Keyspan USA-28X Firmware"
329 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
330 help
331 Say Y here to include firmware for the USA-28X converter.
332 Be sure you have a USA-28X, there are also 28XA and 28XB
333 models, the label underneath has the actual part number.
334
335config USB_SERIAL_KEYSPAN_USA28XA
336 bool "USB Keyspan USA-28XA Firmware"
337 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
338 help
339 Say Y here to include firmware for the USA-28XA converter.
340 Be sure you have a USA-28XA, there are also 28X and 28XB
341 models, the label underneath has the actual part number.
342
343config USB_SERIAL_KEYSPAN_USA28XB
344 bool "USB Keyspan USA-28XB Firmware"
345 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
346 help
347 Say Y here to include firmware for the USA-28XB converter.
348 Be sure you have a USA-28XB, there are also 28X and 28XA
349 models, the label underneath has the actual part number.
350
351config USB_SERIAL_KEYSPAN_USA19
352 bool "USB Keyspan USA-19 Firmware"
353 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
354 help
355 Say Y here to include firmware for the USA-19 converter.
356
357config USB_SERIAL_KEYSPAN_USA18X
358 bool "USB Keyspan USA-18X Firmware"
359 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
360 help
361 Say Y here to include firmware for the USA-18X converter.
362
363config USB_SERIAL_KEYSPAN_USA19W
364 bool "USB Keyspan USA-19W Firmware"
365 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
366 help
367 Say Y here to include firmware for the USA-19W converter.
368
369config USB_SERIAL_KEYSPAN_USA19QW
370 bool "USB Keyspan USA-19QW Firmware"
371 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
372 help
373 Say Y here to include firmware for the USA-19QW converter.
374
375config USB_SERIAL_KEYSPAN_USA19QI
376 bool "USB Keyspan USA-19QI Firmware"
377 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
378 help
379 Say Y here to include firmware for the USA-19QI converter.
380
381config USB_SERIAL_KEYSPAN_USA49W
382 bool "USB Keyspan USA-49W Firmware"
383 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
384 help
385 Say Y here to include firmware for the USA-49W converter.
386
387config USB_SERIAL_KEYSPAN_USA49WLC
388 bool "USB Keyspan USA-49WLC Firmware"
389 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
390 help
391 Say Y here to include firmware for the USA-49WLC converter.
392
393config USB_SERIAL_KLSI
394 tristate "USB KL5KUSB105 (Palmconnect) Driver"
395 ---help---
396 Say Y here if you want to use a KL5KUSB105 - based single port
397 serial adapter. The most widely known -- and currently the only
398 tested -- device in this category is the PalmConnect USB Serial
399 adapter sold by Palm Inc. for use with their Palm III and Palm V
400 series PDAs.
401
402 Please read <file:Documentation/usb/usb-serial.txt> for more
403 information.
404
405 To compile this driver as a module, choose M here: the
406 module will be called kl5kusb105.
407
408config USB_SERIAL_KOBIL_SCT
409 tristate "USB KOBIL chipcard reader"
410 ---help---
411 Say Y here if you want to use one of the following KOBIL USB chipcard
412 readers:
413
414 - USB TWIN
415 - KAAN Standard Plus
416 - KAAN SIM
417 - SecOVID Reader Plus
418 - B1 Professional
419 - KAAN Professional
420
421 Note that you need a current CT-API.
422 To compile this driver as a module, choose M here: the
423 module will be called kobil_sct.
424
425config USB_SERIAL_MCT_U232
426 tristate "USB MCT Single Port Serial Driver"
427 ---help---
428 Say Y here if you want to use a USB Serial single port adapter from
429 Magic Control Technology Corp. (U232 is one of the model numbers).
430
431 This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
432 BAY, Belkin F5U109, and Belkin F5U409 devices.
433
434 To compile this driver as a module, choose M here: the
435 module will be called mct_u232.
436
437config USB_SERIAL_METRO
438 tristate "USB Metrologic Instruments USB-POS Barcode Scanner Driver"
439 ---help---
440 Say Y here if you want to use a USB POS Metrologic barcode scanner.
441
442 To compile this driver as a module, choose M here: the
443 module will be called metro-usb.
444
445config USB_SERIAL_MOS7720
446 tristate "USB Moschip 7720 Serial Driver"
447 ---help---
448 Say Y here if you want to use USB Serial single and double
449 port adapters from Moschip Semiconductor Tech.
450
451 To compile this driver as a module, choose M here: the
452 module will be called mos7720.
453
454config USB_SERIAL_MOS7715_PARPORT
455 bool "Support for parallel port on the Moschip 7715"
456 depends on USB_SERIAL_MOS7720
457 depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720
458 select PARPORT_NOT_PC
459 ---help---
460 Say Y if you have a Moschip 7715 device and would like to use
461 the parallel port it provides. The port will register with
462 the parport subsystem as a low-level driver.
463
464config USB_SERIAL_MOS7840
465 tristate "USB Moschip 7840/7820 USB Serial Driver"
466 ---help---
467 Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820
468 Dual-Serial port device from MosChip Semiconductor.
469
470 The MCS7840 and MCS7820 have been developed to connect a wide range
471 of standard serial devices to a USB host. The MCS7840 has a USB
472 device controller connected to four (4) individual UARTs while the
473 MCS7820 controller connects to two (2) individual UARTs.
474
475 To compile this driver as a module, choose M here: the
476 module will be called mos7840. If unsure, choose N.
477
478config USB_SERIAL_MXUPORT
479 tristate "USB Moxa UPORT Serial Driver"
480 ---help---
481 Say Y here if you want to use a MOXA UPort Serial hub.
482
483 This driver supports:
484
485 [2 Port]
486 - UPort 1250 : 2 Port RS-232/422/485 USB to Serial Hub
487 - UPort 1250I : 2 Port RS-232/422/485 USB to Serial Hub with
488 Isolation
489
490 [4 Port]
491 - UPort 1410 : 4 Port RS-232 USB to Serial Hub
492 - UPort 1450 : 4 Port RS-232/422/485 USB to Serial Hub
493 - UPort 1450I : 4 Port RS-232/422/485 USB to Serial Hub with
494 Isolation
495
496 [8 Port]
497 - UPort 1610-8 : 8 Port RS-232 USB to Serial Hub
498 - UPort 1650-8 : 8 Port RS-232/422/485 USB to Serial Hub
499
500 [16 Port]
501 - UPort 1610-16 : 16 Port RS-232 USB to Serial Hub
502 - UPort 1650-16 : 16 Port RS-232/422/485 USB to Serial Hub
503
504 To compile this driver as a module, choose M here: the
505 module will be called mxuport.
506
507config USB_SERIAL_NAVMAN
508 tristate "USB Navman GPS device"
509 help
510 To compile this driver as a module, choose M here: the
511 module will be called navman.
512
513config USB_SERIAL_PL2303
514 tristate "USB Prolific 2303 Single Port Serial Driver"
515 help
516 Say Y here if you want to use the PL2303 USB Serial single port
517 adapter from Prolific.
518
519 To compile this driver as a module, choose M here: the
520 module will be called pl2303.
521
522config USB_SERIAL_OTI6858
523 tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller"
524 help
525 Say Y here if you want to use the OTi-6858 single port USB to serial
526 converter device.
527
528 To compile this driver as a module, choose M here: the
529 module will be called oti6858.
530
531config USB_SERIAL_QCAUX
532 tristate "USB Qualcomm Auxiliary Serial Port Driver"
533 help
534 Say Y here if you want to use the auxiliary serial ports provided
535 by many modems based on Qualcomm chipsets. These ports often use
536 a proprietary protocol called DM and cannot be used for AT- or
537 PPP-based communication.
538
539 To compile this driver as a module, choose M here: the
540 module will be called qcaux. If unsure, choose N.
541
542config USB_SERIAL_QUALCOMM
543 tristate "USB Qualcomm Serial modem"
544 select USB_SERIAL_WWAN
545 help
546 Say Y here if you have a Qualcomm USB modem device. These are
547 usually wireless cellular modems.
548
549 To compile this driver as a module, choose M here: the
550 module will be called qcserial.
551
552config USB_SERIAL_SPCP8X5
553 tristate "USB SPCP8x5 USB To Serial Driver"
554 help
555 Say Y here if you want to use the spcp8x5 converter chip. This is
556 commonly found in some Z-Wave USB devices.
557
558 To compile this driver as a module, choose M here: the
559 module will be called spcp8x5.
560
561config USB_SERIAL_SAFE
562 tristate "USB Safe Serial (Encapsulated) Driver"
563
564config USB_SERIAL_SAFE_PADDED
565 bool "USB Secure Encapsulated Driver - Padded"
566 depends on USB_SERIAL_SAFE
567
568config USB_SERIAL_SIERRAWIRELESS
569 tristate "USB Sierra Wireless Driver"
570 help
571 Say M here if you want to use Sierra Wireless devices.
572
573 Many devices have a feature known as TRU-Install. For those devices
574 to work properly, the USB Storage Sierra feature must be enabled.
575
576 To compile this driver as a module, choose M here: the
577 module will be called sierra.
578
579config USB_SERIAL_SYMBOL
580 tristate "USB Symbol Barcode driver (serial mode)"
581 help
582 Say Y here if you want to use a Symbol USB Barcode device
583 in serial emulation mode.
584
585 To compile this driver as a module, choose M here: the
586 module will be called symbolserial.
587
588config USB_SERIAL_TI
589 tristate "USB TI 3410/5052 Serial Driver"
590 help
591 Say Y here if you want to use the TI USB 3410 or 5052
592 serial devices.
593
594 To compile this driver as a module, choose M here: the
595 module will be called ti_usb_3410_5052.
596
597config USB_SERIAL_CYBERJACK
598 tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader"
599 ---help---
600 Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
601 reader. This is an interface to ISO 7816 compatible contact-based
602 chipcards, e.g. GSM SIMs.
603
604 To compile this driver as a module, choose M here: the
605 module will be called cyberjack.
606
607 If unsure, say N.
608
609config USB_SERIAL_XIRCOM
610 tristate "USB Xircom / Entrega Single Port Serial Driver"
611 select USB_EZUSB_FX2
612 help
613 Say Y here if you want to use a Xircom or Entrega single port USB to
614 serial converter device. This driver makes use of firmware
615 developed from scratch by Brian Warner.
616
617 To compile this driver as a module, choose M here: the
618 module will be called keyspan_pda.
619
620config USB_SERIAL_WWAN
621 tristate
622
623config USB_SERIAL_OPTION
624 tristate "USB driver for GSM and CDMA modems"
625 select USB_SERIAL_WWAN
626 help
627 Say Y here if you have a GSM or CDMA modem that's connected to USB.
628
629 This driver also supports several PCMCIA cards which have a
630 built-in OHCI-USB adapter and an internally-connected GSM modem.
631 The USB bus on these cards is not accessible externally.
632
633 Supported devices include (some of?) those made by:
634 Option, Huawei, Audiovox, Novatel Wireless, or Anydata.
635
636 To compile this driver as a module, choose M here: the
637 module will be called option.
638
639 If this driver doesn't recognize your device,
640 it might be accessible via the FTDI_SIO driver.
641
642config USB_SERIAL_OMNINET
643 tristate "USB ZyXEL omni.net LCD Plus Driver"
644 help
645 Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
646
647 To compile this driver as a module, choose M here: the
648 module will be called omninet.
649
650config USB_SERIAL_OPTICON
651 tristate "USB Opticon Barcode driver (serial mode)"
652 help
653 Say Y here if you want to use a Opticon USB Barcode device
654 in serial emulation mode.
655
656 To compile this driver as a module, choose M here: the
657 module will be called opticon.
658
659config USB_SERIAL_XSENS_MT
660 tristate "Xsens motion tracker serial interface driver"
661 help
662 Say Y here if you want to use Xsens motion trackers.
663
664 This driver supports the new generation of motion trackers
665 by Xsens. Older devices can be accessed using the FTDI_SIO
666 driver.
667
668 To compile this driver as a module, choose M here: the
669 module will be called xsens_mt.
670
671config USB_SERIAL_WISHBONE
672 tristate "USB-Wishbone adapter interface driver"
673 help
674 Say Y here if you want to use a USB attached Wishbone bus.
675
676 Wishbone is an open hardware SoC bus commonly used in FPGA
677 designs. Bus access can be serialized using the Etherbone
678 protocol <http://www.ohwr.org/projects/etherbone-core>.
679
680 This driver is intended to be used with devices which attach
681 their internal Wishbone bus to a USB serial interface using
682 the Etherbone protocol. A userspace library is required to
683 speak the protocol made available by this driver as ttyUSBx.
684
685 To compile this driver as a module, choose M here: the
686 module will be called wishbone-serial.
687
688config USB_SERIAL_SSU100
689 tristate "USB Quatech SSU-100 Single Port Serial Driver"
690 help
691 Say Y here if you want to use the Quatech SSU-100 single
692 port usb to serial adapter.
693
694 To compile this driver as a module, choose M here: the
695 module will be called ssu100.
696
697config USB_SERIAL_QT2
698 tristate "USB Quatech Serial Driver for USB 2 devices"
699 help
700 Say Y here if you want to use the Quatech USB 2
701 serial adapters.
702
703 To compile this driver as a module, choose M here: the
704 module will be called quatech-serial.
705
706config USB_SERIAL_DEBUG
707 tristate "USB Debugging Device"
708 help
709 Say Y here if you have a USB debugging device used to receive
710 debugging data from another machine. The most common of these
711 devices is the NetChip TurboCONNECT device.
712
713 To compile this driver as a module, choose M here: the
714 module will be called usb-debug.
715
716endif # USB_SERIAL
1# SPDX-License-Identifier: GPL-2.0
2#
3# USB Serial device configuration
4#
5
6menuconfig USB_SERIAL
7 tristate "USB Serial Converter support"
8 depends on TTY
9 ---help---
10 Say Y here if you have a USB device that provides normal serial
11 ports, or acts like a serial device, and you want to connect it to
12 your USB bus.
13
14 Please read <file:Documentation/usb/usb-serial.rst> for more
15 information on the specifics of the different devices that are
16 supported, and on how to use them.
17
18 To compile this driver as a module, choose M here: the
19 module will be called usbserial.
20
21if USB_SERIAL
22
23config USB_SERIAL_CONSOLE
24 bool "USB Serial Console device support"
25 depends on USB_SERIAL=y
26 ---help---
27 If you say Y here, it will be possible to use a USB to serial
28 converter port as the system console (the system console is the
29 device which receives all kernel messages and warnings and which
30 allows logins in single user mode). This could be useful if some
31 terminal or printer is connected to that serial port.
32
33 Even if you say Y here, the currently visible virtual console
34 (/dev/tty0) will still be used as the system console by default, but
35 you can alter that using a kernel command line option such as
36 "console=ttyUSB0". (Try "man bootparam" or see the documentation of
37 your boot loader (lilo or loadlin) about how to pass options to the
38 kernel at boot time.)
39
40 If you don't have a VGA card installed and you say Y here, the
41 kernel will automatically use the first USB to serial converter
42 port, /dev/ttyUSB0, as system console.
43
44 If unsure, say N.
45
46config USB_SERIAL_GENERIC
47 bool "USB Generic Serial Driver"
48 help
49 Say Y here if you want to use the generic USB serial driver. Please
50 read <file:Documentation/usb/usb-serial.rst> for more information on
51 using this driver. It is recommended that the "USB Serial converter
52 support" be compiled as a module for this driver to be used
53 properly.
54
55config USB_SERIAL_SIMPLE
56 tristate "USB Serial Simple Driver"
57 help
58 Say Y here to use the USB serial "simple" driver. This driver
59 handles a wide range of very simple devices, all in one
60 driver. Specifically, it supports:
61 - Suunto ANT+ USB device.
62 - Medtronic CareLink USB device
63 - Fundamental Software dongle.
64 - Google USB serial devices
65 - HP4x calculators
66 - Libtransistor USB console
67 - a number of Motorola phones
68 - Motorola Tetra devices
69 - Novatel Wireless GPS receivers
70 - Siemens USB/MPI adapter.
71 - ViVOtech ViVOpay USB device.
72 - Infineon Modem Flashloader USB interface
73 - ZIO Motherboard USB serial interface
74
75 To compile this driver as a module, choose M here: the module
76 will be called usb-serial-simple.
77
78config USB_SERIAL_AIRCABLE
79 tristate "USB AIRcable Bluetooth Dongle Driver"
80 help
81 Say Y here if you want to use USB AIRcable Bluetooth Dongle.
82
83 To compile this driver as a module, choose M here: the module
84 will be called aircable.
85
86config USB_SERIAL_ARK3116
87 tristate "USB ARK Micro 3116 USB Serial Driver"
88 help
89 Say Y here if you want to use a ARK Micro 3116 USB to Serial
90 device.
91
92 To compile this driver as a module, choose M here: the
93 module will be called ark3116
94
95config USB_SERIAL_BELKIN
96 tristate "USB Belkin and Peracom Single Port Serial Driver"
97 help
98 Say Y here if you want to use a Belkin USB Serial single port
99 adaptor (F5U103 is one of the model numbers) or the Peracom single
100 port USB to serial adapter.
101
102 To compile this driver as a module, choose M here: the
103 module will be called belkin_sa.
104
105config USB_SERIAL_CH341
106 tristate "USB Winchiphead CH341 Single Port Serial Driver"
107 help
108 Say Y here if you want to use a Winchiphead CH341 single port
109 USB to serial adapter.
110
111 To compile this driver as a module, choose M here: the
112 module will be called ch341.
113
114config USB_SERIAL_WHITEHEAT
115 tristate "USB ConnectTech WhiteHEAT Serial Driver"
116 select USB_EZUSB_FX2
117 help
118 Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
119 USB to serial converter device.
120
121 To compile this driver as a module, choose M here: the
122 module will be called whiteheat.
123
124config USB_SERIAL_DIGI_ACCELEPORT
125 tristate "USB Digi International AccelePort USB Serial Driver"
126 ---help---
127 Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
128 2 port (plus parallel port) and 4 port USB serial converters. The
129 parallel port on the USB 2 appears as a third serial port on Linux.
130 The Digi Acceleport USB 8 is not yet supported by this driver.
131
132 This driver works under SMP with the usb-uhci driver. It does not
133 work under SMP with the uhci driver.
134
135 To compile this driver as a module, choose M here: the
136 module will be called digi_acceleport.
137
138config USB_SERIAL_CP210X
139 tristate "USB CP210x family of UART Bridge Controllers"
140 help
141 Say Y here if you want to use a CP2101/CP2102/CP2103 based USB
142 to RS232 converters.
143
144 To compile this driver as a module, choose M here: the
145 module will be called cp210x.
146
147config USB_SERIAL_CYPRESS_M8
148 tristate "USB Cypress M8 USB Serial Driver"
149 help
150 Say Y here if you want to use a device that contains the Cypress
151 USB to Serial microcontroller, such as the DeLorme Earthmate GPS.
152
153 Attempted SMP support... send bug reports!
154
155 Supported microcontrollers in the CY4601 family are:
156 CY7C63741 CY7C63742 CY7C63743 CY7C64013
157
158 To compile this driver as a module, choose M here: the
159 module will be called cypress_m8.
160
161config USB_SERIAL_EMPEG
162 tristate "USB Empeg empeg-car Mark I/II Driver"
163 help
164 Say Y here if you want to connect to your Empeg empeg-car Mark I/II
165 mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...}
166 device node. See <file:Documentation/usb/usb-serial.rst> for more
167 tidbits of information.
168
169 To compile this driver as a module, choose M here: the
170 module will be called empeg.
171
172config USB_SERIAL_FTDI_SIO
173 tristate "USB FTDI Single Port Serial Driver"
174 ---help---
175 Say Y here if you want to use a FTDI SIO single port USB to serial
176 converter device. The implementation I have is called the USC-1000.
177 This driver has also been tested with the 245 and 232 devices.
178
179 See <http://ftdi-usb-sio.sourceforge.net/> for more
180 information on this driver and the device.
181
182 To compile this driver as a module, choose M here: the
183 module will be called ftdi_sio.
184
185config USB_SERIAL_VISOR
186 tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
187 help
188 Say Y here if you want to connect to your HandSpring Visor, Palm
189 m500 or m505 through its USB docking station. See
190 <http://usbvisor.sourceforge.net/index.php3> for more information on using this
191 driver.
192
193 To compile this driver as a module, choose M here: the
194 module will be called visor.
195
196config USB_SERIAL_IPAQ
197 tristate "USB PocketPC PDA Driver"
198 help
199 Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
200 or any other PDA running Windows CE 3.0 or PocketPC 2002
201 using a USB cradle/cable. For information on using the driver,
202 read <file:Documentation/usb/usb-serial.rst>.
203
204 To compile this driver as a module, choose M here: the
205 module will be called ipaq.
206
207config USB_SERIAL_IR
208 tristate "USB IR Dongle Serial Driver"
209 help
210 Say Y here if you want to enable simple serial support for USB IrDA
211 devices. This is useful if you do not want to use the full IrDA
212 stack.
213
214 To compile this driver as a module, choose M here: the
215 module will be called ir-usb.
216
217config USB_SERIAL_EDGEPORT
218 tristate "USB Inside Out Edgeport Serial Driver"
219 ---help---
220 Say Y here if you want to use any of the following devices from
221 Inside Out Networks (Digi):
222 Edgeport/4
223 Rapidport/4
224 Edgeport/4t
225 Edgeport/2
226 Edgeport/4i
227 Edgeport/2i
228 Edgeport/421
229 Edgeport/21
230 Edgeport/8
231 Edgeport/8 Dual
232 Edgeport/2D8
233 Edgeport/4D8
234 Edgeport/8i
235 Edgeport/2 DIN
236 Edgeport/4 DIN
237 Edgeport/16 Dual
238
239 To compile this driver as a module, choose M here: the
240 module will be called io_edgeport.
241
242config USB_SERIAL_EDGEPORT_TI
243 tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
244 help
245 Say Y here if you want to use any of the devices from Inside Out
246 Networks (Digi) that are not supported by the io_edgeport driver.
247 This includes the Edgeport/1 device.
248
249 To compile this driver as a module, choose M here: the
250 module will be called io_ti.
251
252config USB_SERIAL_F81232
253 tristate "USB Fintek F81232 Single Port Serial Driver"
254 help
255 Say Y here if you want to use the Fintek F81232 single
256 port usb to serial adapter.
257
258 To compile this driver as a module, choose M here: the
259 module will be called f81232.
260
261config USB_SERIAL_F8153X
262 tristate "USB Fintek F81532/534 Multi-Ports Serial Driver"
263 help
264 Say Y here if you want to use the Fintek F81532/534 Multi-Ports
265 USB to serial adapter.
266
267 To compile this driver as a module, choose M here: the
268 module will be called f81534.
269
270
271config USB_SERIAL_GARMIN
272 tristate "USB Garmin GPS driver"
273 help
274 Say Y here if you want to connect to your Garmin GPS.
275 Should work with most Garmin GPS devices which have a native USB port.
276
277 See <http://sourceforge.net/projects/garmin-gps> for the latest
278 version of the driver.
279
280 To compile this driver as a module, choose M here: the
281 module will be called garmin_gps.
282
283config USB_SERIAL_IPW
284 tristate "USB IPWireless (3G UMTS TDD) Driver"
285 select USB_SERIAL_WWAN
286 help
287 Say Y here if you want to use a IPWireless USB modem such as
288 the ones supplied by Axity3G/Sentech South Africa.
289
290 To compile this driver as a module, choose M here: the
291 module will be called ipw.
292
293config USB_SERIAL_IUU
294 tristate "USB Infinity USB Unlimited Phoenix Driver"
295 help
296 Say Y here if you want to use a IUU in phoenix mode and get
297 an extra ttyUSBx device. More information available on
298 http://eczema.ecze.com/iuu_phoenix.html
299
300 To compile this driver as a module, choose M here: the
301 module will be called iuu_phoenix.o
302
303config USB_SERIAL_KEYSPAN_PDA
304 tristate "USB Keyspan PDA Single Port Serial Driver"
305 select USB_EZUSB_FX2
306 help
307 Say Y here if you want to use a Keyspan PDA single port USB to
308 serial converter device. This driver makes use of firmware
309 developed from scratch by Brian Warner.
310
311 To compile this driver as a module, choose M here: the
312 module will be called keyspan_pda.
313
314config USB_SERIAL_KEYSPAN
315 tristate "USB Keyspan USA-xxx Serial Driver"
316 select USB_EZUSB_FX2
317 ---help---
318 Say Y here if you want to use Keyspan USB to serial converter
319 devices. This driver makes use of Keyspan's official firmware
320 and was developed with their support. You must also include
321 firmware to support your particular device(s).
322
323 See <http://blemings.org/hugh/keyspan.html> for more information.
324
325 To compile this driver as a module, choose M here: the
326 module will be called keyspan.
327
328config USB_SERIAL_KLSI
329 tristate "USB KL5KUSB105 (Palmconnect) Driver"
330 ---help---
331 Say Y here if you want to use a KL5KUSB105 - based single port
332 serial adapter. The most widely known -- and currently the only
333 tested -- device in this category is the PalmConnect USB Serial
334 adapter sold by Palm Inc. for use with their Palm III and Palm V
335 series PDAs.
336
337 Please read <file:Documentation/usb/usb-serial.rst> for more
338 information.
339
340 To compile this driver as a module, choose M here: the
341 module will be called kl5kusb105.
342
343config USB_SERIAL_KOBIL_SCT
344 tristate "USB KOBIL chipcard reader"
345 ---help---
346 Say Y here if you want to use one of the following KOBIL USB chipcard
347 readers:
348
349 - USB TWIN
350 - KAAN Standard Plus
351 - KAAN SIM
352 - SecOVID Reader Plus
353 - B1 Professional
354 - KAAN Professional
355
356 Note that you need a current CT-API.
357 To compile this driver as a module, choose M here: the
358 module will be called kobil_sct.
359
360config USB_SERIAL_MCT_U232
361 tristate "USB MCT Single Port Serial Driver"
362 ---help---
363 Say Y here if you want to use a USB Serial single port adapter from
364 Magic Control Technology Corp. (U232 is one of the model numbers).
365
366 This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
367 BAY, Belkin F5U109, and Belkin F5U409 devices.
368
369 To compile this driver as a module, choose M here: the
370 module will be called mct_u232.
371
372config USB_SERIAL_METRO
373 tristate "USB Metrologic Instruments USB-POS Barcode Scanner Driver"
374 ---help---
375 Say Y here if you want to use a USB POS Metrologic barcode scanner.
376
377 To compile this driver as a module, choose M here: the
378 module will be called metro-usb.
379
380config USB_SERIAL_MOS7720
381 tristate "USB Moschip 7720 Serial Driver"
382 ---help---
383 Say Y here if you want to use USB Serial single and double
384 port adapters from Moschip Semiconductor Tech.
385
386 To compile this driver as a module, choose M here: the
387 module will be called mos7720.
388
389config USB_SERIAL_MOS7715_PARPORT
390 bool "Support for parallel port on the Moschip 7715"
391 depends on USB_SERIAL_MOS7720
392 depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720
393 select PARPORT_NOT_PC
394 ---help---
395 Say Y if you have a Moschip 7715 device and would like to use
396 the parallel port it provides. The port will register with
397 the parport subsystem as a low-level driver.
398
399config USB_SERIAL_MOS7840
400 tristate "USB Moschip 7840/7820 USB Serial Driver"
401 ---help---
402 Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820
403 Dual-Serial port device from MosChip Semiconductor.
404
405 The MCS7840 and MCS7820 have been developed to connect a wide range
406 of standard serial devices to a USB host. The MCS7840 has a USB
407 device controller connected to four (4) individual UARTs while the
408 MCS7820 controller connects to two (2) individual UARTs.
409
410 To compile this driver as a module, choose M here: the
411 module will be called mos7840. If unsure, choose N.
412
413config USB_SERIAL_MXUPORT
414 tristate "USB Moxa UPORT Serial Driver"
415 ---help---
416 Say Y here if you want to use a MOXA UPort Serial hub.
417
418 This driver supports:
419
420 [2 Port]
421 - UPort 1250 : 2 Port RS-232/422/485 USB to Serial Hub
422 - UPort 1250I : 2 Port RS-232/422/485 USB to Serial Hub with
423 Isolation
424
425 [4 Port]
426 - UPort 1410 : 4 Port RS-232 USB to Serial Hub
427 - UPort 1450 : 4 Port RS-232/422/485 USB to Serial Hub
428 - UPort 1450I : 4 Port RS-232/422/485 USB to Serial Hub with
429 Isolation
430
431 [8 Port]
432 - UPort 1610-8 : 8 Port RS-232 USB to Serial Hub
433 - UPort 1650-8 : 8 Port RS-232/422/485 USB to Serial Hub
434
435 [16 Port]
436 - UPort 1610-16 : 16 Port RS-232 USB to Serial Hub
437 - UPort 1650-16 : 16 Port RS-232/422/485 USB to Serial Hub
438
439 To compile this driver as a module, choose M here: the
440 module will be called mxuport.
441
442config USB_SERIAL_NAVMAN
443 tristate "USB Navman GPS device"
444 help
445 To compile this driver as a module, choose M here: the
446 module will be called navman.
447
448config USB_SERIAL_PL2303
449 tristate "USB Prolific 2303 Single Port Serial Driver"
450 help
451 Say Y here if you want to use the PL2303 USB Serial single port
452 adapter from Prolific.
453
454 To compile this driver as a module, choose M here: the
455 module will be called pl2303.
456
457config USB_SERIAL_OTI6858
458 tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller"
459 help
460 Say Y here if you want to use the OTi-6858 single port USB to serial
461 converter device.
462
463 To compile this driver as a module, choose M here: the
464 module will be called oti6858.
465
466config USB_SERIAL_QCAUX
467 tristate "USB Qualcomm Auxiliary Serial Port Driver"
468 help
469 Say Y here if you want to use the auxiliary serial ports provided
470 by many modems based on Qualcomm chipsets. These ports often use
471 a proprietary protocol called DM and cannot be used for AT- or
472 PPP-based communication.
473
474 To compile this driver as a module, choose M here: the
475 module will be called qcaux. If unsure, choose N.
476
477config USB_SERIAL_QUALCOMM
478 tristate "USB Qualcomm Serial modem"
479 select USB_SERIAL_WWAN
480 help
481 Say Y here if you have a Qualcomm USB modem device. These are
482 usually wireless cellular modems.
483
484 To compile this driver as a module, choose M here: the
485 module will be called qcserial.
486
487config USB_SERIAL_SPCP8X5
488 tristate "USB SPCP8x5 USB To Serial Driver"
489 help
490 Say Y here if you want to use the spcp8x5 converter chip. This is
491 commonly found in some Z-Wave USB devices.
492
493 To compile this driver as a module, choose M here: the
494 module will be called spcp8x5.
495
496config USB_SERIAL_SAFE
497 tristate "USB Safe Serial (Encapsulated) Driver"
498
499config USB_SERIAL_SAFE_PADDED
500 bool "USB Secure Encapsulated Driver - Padded"
501 depends on USB_SERIAL_SAFE
502
503config USB_SERIAL_SIERRAWIRELESS
504 tristate "USB Sierra Wireless Driver"
505 help
506 Say M here if you want to use Sierra Wireless devices.
507
508 Many devices have a feature known as TRU-Install. For those devices
509 to work properly, the USB Storage Sierra feature must be enabled.
510
511 To compile this driver as a module, choose M here: the
512 module will be called sierra.
513
514config USB_SERIAL_SYMBOL
515 tristate "USB Symbol Barcode driver (serial mode)"
516 help
517 Say Y here if you want to use a Symbol USB Barcode device
518 in serial emulation mode.
519
520 To compile this driver as a module, choose M here: the
521 module will be called symbolserial.
522
523config USB_SERIAL_TI
524 tristate "USB TI 3410/5052 Serial Driver"
525 help
526 Say Y here if you want to use the TI USB 3410 or 5052
527 serial devices.
528
529 To compile this driver as a module, choose M here: the
530 module will be called ti_usb_3410_5052.
531
532config USB_SERIAL_CYBERJACK
533 tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader"
534 ---help---
535 Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
536 reader. This is an interface to ISO 7816 compatible contact-based
537 chipcards, e.g. GSM SIMs.
538
539 To compile this driver as a module, choose M here: the
540 module will be called cyberjack.
541
542 If unsure, say N.
543
544config USB_SERIAL_XIRCOM
545 tristate "USB Xircom / Entrega Single Port Serial Driver"
546 select USB_EZUSB_FX2
547 help
548 Say Y here if you want to use a Xircom or Entrega single port USB to
549 serial converter device. This driver makes use of firmware
550 developed from scratch by Brian Warner.
551
552 To compile this driver as a module, choose M here: the
553 module will be called keyspan_pda.
554
555config USB_SERIAL_WWAN
556 tristate
557
558config USB_SERIAL_OPTION
559 tristate "USB driver for GSM and CDMA modems"
560 select USB_SERIAL_WWAN
561 help
562 Say Y here if you have a GSM or CDMA modem that's connected to USB.
563
564 This driver also supports several PCMCIA cards which have a
565 built-in OHCI-USB adapter and an internally-connected GSM modem.
566 The USB bus on these cards is not accessible externally.
567
568 Supported devices include (some of?) those made by:
569 Option, Huawei, Audiovox, Novatel Wireless, or Anydata.
570
571 To compile this driver as a module, choose M here: the
572 module will be called option.
573
574 If this driver doesn't recognize your device,
575 it might be accessible via the FTDI_SIO driver.
576
577config USB_SERIAL_OMNINET
578 tristate "USB ZyXEL omni.net LCD Plus Driver"
579 help
580 Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
581
582 To compile this driver as a module, choose M here: the
583 module will be called omninet.
584
585config USB_SERIAL_OPTICON
586 tristate "USB Opticon Barcode driver (serial mode)"
587 help
588 Say Y here if you want to use a Opticon USB Barcode device
589 in serial emulation mode.
590
591 To compile this driver as a module, choose M here: the
592 module will be called opticon.
593
594config USB_SERIAL_XSENS_MT
595 tristate "Xsens motion tracker serial interface driver"
596 help
597 Say Y here if you want to use Xsens motion trackers.
598
599 This driver supports the new generation of motion trackers
600 by Xsens. Older devices can be accessed using the FTDI_SIO
601 driver.
602
603 To compile this driver as a module, choose M here: the
604 module will be called xsens_mt.
605
606config USB_SERIAL_WISHBONE
607 tristate "USB-Wishbone adapter interface driver"
608 help
609 Say Y here if you want to use a USB attached Wishbone bus.
610
611 Wishbone is an open hardware SoC bus commonly used in FPGA
612 designs. Bus access can be serialized using the Etherbone
613 protocol <http://www.ohwr.org/projects/etherbone-core>.
614
615 This driver is intended to be used with devices which attach
616 their internal Wishbone bus to a USB serial interface using
617 the Etherbone protocol. A userspace library is required to
618 speak the protocol made available by this driver as ttyUSBx.
619
620 To compile this driver as a module, choose M here: the
621 module will be called wishbone-serial.
622
623config USB_SERIAL_SSU100
624 tristate "USB Quatech SSU-100 Single Port Serial Driver"
625 help
626 Say Y here if you want to use the Quatech SSU-100 single
627 port usb to serial adapter.
628
629 To compile this driver as a module, choose M here: the
630 module will be called ssu100.
631
632config USB_SERIAL_QT2
633 tristate "USB Quatech Serial Driver for USB 2 devices"
634 help
635 Say Y here if you want to use the Quatech USB 2
636 serial adapters.
637
638 To compile this driver as a module, choose M here: the
639 module will be called quatech-serial.
640
641config USB_SERIAL_UPD78F0730
642 tristate "USB Renesas uPD78F0730 Single Port Serial Driver"
643 help
644 Say Y here if you want to use the Renesas uPD78F0730
645 serial driver.
646
647 To compile this driver as a module, choose M here: the
648 module will be called upd78f0730.
649
650config USB_SERIAL_DEBUG
651 tristate "USB Debugging Device"
652 help
653 Say Y here if you have a USB debugging device used to receive
654 debugging data from another machine. The most common of these
655 devices is the NetChip TurboCONNECT device.
656
657 To compile this driver as a module, choose M here: the
658 module will be called usb-debug.
659
660endif # USB_SERIAL