Loading...
1#
2# USB Serial device configuration
3#
4
5menuconfig USB_SERIAL
6 tristate "USB Serial Converter support"
7 depends on TTY
8 ---help---
9 Say Y here if you have a USB device that provides normal serial
10 ports, or acts like a serial device, and you want to connect it to
11 your USB bus.
12
13 Please read <file:Documentation/usb/usb-serial.txt> for more
14 information on the specifics of the different devices that are
15 supported, and on how to use them.
16
17 To compile this driver as a module, choose M here: the
18 module will be called usbserial.
19
20if USB_SERIAL
21
22config USB_SERIAL_CONSOLE
23 bool "USB Serial Console device support"
24 depends on USB_SERIAL=y
25 ---help---
26 If you say Y here, it will be possible to use a USB to serial
27 converter port as the system console (the system console is the
28 device which receives all kernel messages and warnings and which
29 allows logins in single user mode). This could be useful if some
30 terminal or printer is connected to that serial port.
31
32 Even if you say Y here, the currently visible virtual console
33 (/dev/tty0) will still be used as the system console by default, but
34 you can alter that using a kernel command line option such as
35 "console=ttyUSB0". (Try "man bootparam" or see the documentation of
36 your boot loader (lilo or loadlin) about how to pass options to the
37 kernel at boot time.)
38
39 If you don't have a VGA card installed and you say Y here, the
40 kernel will automatically use the first USB to serial converter
41 port, /dev/ttyUSB0, as system console.
42
43 If unsure, say N.
44
45config USB_SERIAL_GENERIC
46 bool "USB Generic Serial Driver"
47 help
48 Say Y here if you want to use the generic USB serial driver. Please
49 read <file:Documentation/usb/usb-serial.txt> for more information on
50 using this driver. It is recommended that the "USB Serial converter
51 support" be compiled as a module for this driver to be used
52 properly.
53
54config USB_SERIAL_SIMPLE
55 tristate "USB Serial Simple Driver"
56 help
57 Say Y here to use the USB serial "simple" driver. This driver
58 handles a wide range of very simple devices, all in one
59 driver. Specifically, it supports:
60 - Suunto ANT+ USB device.
61 - Medtronic CareLink USB device
62 - Fundamental Software dongle.
63 - Google USB serial devices
64 - HP4x calculators
65 - a number of Motorola phones
66 - Novatel Wireless GPS receivers
67 - Siemens USB/MPI adapter.
68 - ViVOtech ViVOpay USB device.
69 - Infineon Modem Flashloader USB interface
70 - ZIO Motherboard USB serial interface
71
72 To compile this driver as a module, choose M here: the module
73 will be called usb-serial-simple.
74
75config USB_SERIAL_AIRCABLE
76 tristate "USB AIRcable Bluetooth Dongle Driver"
77 help
78 Say Y here if you want to use USB AIRcable Bluetooth Dongle.
79
80 To compile this driver as a module, choose M here: the module
81 will be called aircable.
82
83config USB_SERIAL_ARK3116
84 tristate "USB ARK Micro 3116 USB Serial Driver"
85 help
86 Say Y here if you want to use a ARK Micro 3116 USB to Serial
87 device.
88
89 To compile this driver as a module, choose M here: the
90 module will be called ark3116
91
92config USB_SERIAL_BELKIN
93 tristate "USB Belkin and Peracom Single Port Serial Driver"
94 help
95 Say Y here if you want to use a Belkin USB Serial single port
96 adaptor (F5U103 is one of the model numbers) or the Peracom single
97 port USB to serial adapter.
98
99 To compile this driver as a module, choose M here: the
100 module will be called belkin_sa.
101
102config USB_SERIAL_CH341
103 tristate "USB Winchiphead CH341 Single Port Serial Driver"
104 help
105 Say Y here if you want to use a Winchiphead CH341 single port
106 USB to serial adapter.
107
108 To compile this driver as a module, choose M here: the
109 module will be called ch341.
110
111config USB_SERIAL_WHITEHEAT
112 tristate "USB ConnectTech WhiteHEAT Serial Driver"
113 select USB_EZUSB_FX2
114 help
115 Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
116 USB to serial converter device.
117
118 To compile this driver as a module, choose M here: the
119 module will be called whiteheat.
120
121config USB_SERIAL_DIGI_ACCELEPORT
122 tristate "USB Digi International AccelePort USB Serial Driver"
123 ---help---
124 Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
125 2 port (plus parallel port) and 4 port USB serial converters. The
126 parallel port on the USB 2 appears as a third serial port on Linux.
127 The Digi Acceleport USB 8 is not yet supported by this driver.
128
129 This driver works under SMP with the usb-uhci driver. It does not
130 work under SMP with the uhci driver.
131
132 To compile this driver as a module, choose M here: the
133 module will be called digi_acceleport.
134
135config USB_SERIAL_CP210X
136 tristate "USB CP210x family of UART Bridge Controllers"
137 help
138 Say Y here if you want to use a CP2101/CP2102/CP2103 based USB
139 to RS232 converters.
140
141 To compile this driver as a module, choose M here: the
142 module will be called cp210x.
143
144config USB_SERIAL_CYPRESS_M8
145 tristate "USB Cypress M8 USB Serial Driver"
146 help
147 Say Y here if you want to use a device that contains the Cypress
148 USB to Serial microcontroller, such as the DeLorme Earthmate GPS.
149
150 Attempted SMP support... send bug reports!
151
152 Supported microcontrollers in the CY4601 family are:
153 CY7C63741 CY7C63742 CY7C63743 CY7C64013
154
155 To compile this driver as a module, choose M here: the
156 module will be called cypress_m8.
157
158config USB_SERIAL_EMPEG
159 tristate "USB Empeg empeg-car Mark I/II Driver"
160 help
161 Say Y here if you want to connect to your Empeg empeg-car Mark I/II
162 mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...}
163 device node. See <file:Documentation/usb/usb-serial.txt> for more
164 tidbits of information.
165
166 To compile this driver as a module, choose M here: the
167 module will be called empeg.
168
169config USB_SERIAL_FTDI_SIO
170 tristate "USB FTDI Single Port Serial Driver"
171 ---help---
172 Say Y here if you want to use a FTDI SIO single port USB to serial
173 converter device. The implementation I have is called the USC-1000.
174 This driver has also been tested with the 245 and 232 devices.
175
176 See <http://ftdi-usb-sio.sourceforge.net/> for more
177 information on this driver and the device.
178
179 To compile this driver as a module, choose M here: the
180 module will be called ftdi_sio.
181
182config USB_SERIAL_VISOR
183 tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
184 help
185 Say Y here if you want to connect to your HandSpring Visor, Palm
186 m500 or m505 through its USB docking station. See
187 <http://usbvisor.sourceforge.net/index.php3> for more information on using this
188 driver.
189
190 To compile this driver as a module, choose M here: the
191 module will be called visor.
192
193config USB_SERIAL_IPAQ
194 tristate "USB PocketPC PDA Driver"
195 help
196 Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
197 or any other PDA running Windows CE 3.0 or PocketPC 2002
198 using a USB cradle/cable. For information on using the driver,
199 read <file:Documentation/usb/usb-serial.txt>.
200
201 To compile this driver as a module, choose M here: the
202 module will be called ipaq.
203
204config USB_SERIAL_IR
205 tristate "USB IR Dongle Serial Driver"
206 help
207 Say Y here if you want to enable simple serial support for USB IrDA
208 devices. This is useful if you do not want to use the full IrDA
209 stack.
210
211 To compile this driver as a module, choose M here: the
212 module will be called ir-usb.
213
214config USB_SERIAL_EDGEPORT
215 tristate "USB Inside Out Edgeport Serial Driver"
216 ---help---
217 Say Y here if you want to use any of the following devices from
218 Inside Out Networks (Digi):
219 Edgeport/4
220 Rapidport/4
221 Edgeport/4t
222 Edgeport/2
223 Edgeport/4i
224 Edgeport/2i
225 Edgeport/421
226 Edgeport/21
227 Edgeport/8
228 Edgeport/8 Dual
229 Edgeport/2D8
230 Edgeport/4D8
231 Edgeport/8i
232 Edgeport/2 DIN
233 Edgeport/4 DIN
234 Edgeport/16 Dual
235
236 To compile this driver as a module, choose M here: the
237 module will be called io_edgeport.
238
239config USB_SERIAL_EDGEPORT_TI
240 tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
241 help
242 Say Y here if you want to use any of the devices from Inside Out
243 Networks (Digi) that are not supported by the io_edgeport driver.
244 This includes the Edgeport/1 device.
245
246 To compile this driver as a module, choose M here: the
247 module will be called io_ti.
248
249config USB_SERIAL_F81232
250 tristate "USB Fintek F81232 Single Port Serial Driver"
251 help
252 Say Y here if you want to use the Fintek F81232 single
253 port usb to serial adapter.
254
255 To compile this driver as a module, choose M here: the
256 module will be called f81232.
257
258config USB_SERIAL_GARMIN
259 tristate "USB Garmin GPS driver"
260 help
261 Say Y here if you want to connect to your Garmin GPS.
262 Should work with most Garmin GPS devices which have a native USB port.
263
264 See <http://sourceforge.net/projects/garmin-gps> for the latest
265 version of the driver.
266
267 To compile this driver as a module, choose M here: the
268 module will be called garmin_gps.
269
270config USB_SERIAL_IPW
271 tristate "USB IPWireless (3G UMTS TDD) Driver"
272 select USB_SERIAL_WWAN
273 help
274 Say Y here if you want to use a IPWireless USB modem such as
275 the ones supplied by Axity3G/Sentech South Africa.
276
277 To compile this driver as a module, choose M here: the
278 module will be called ipw.
279
280config USB_SERIAL_IUU
281 tristate "USB Infinity USB Unlimited Phoenix Driver"
282 help
283 Say Y here if you want to use a IUU in phoenix mode and get
284 an extra ttyUSBx device. More information available on
285 http://eczema.ecze.com/iuu_phoenix.html
286
287 To compile this driver as a module, choose M here: the
288 module will be called iuu_phoenix.o
289
290config USB_SERIAL_KEYSPAN_PDA
291 tristate "USB Keyspan PDA Single Port Serial Driver"
292 select USB_EZUSB_FX2
293 help
294 Say Y here if you want to use a Keyspan PDA single port USB to
295 serial converter device. This driver makes use of firmware
296 developed from scratch by Brian Warner.
297
298 To compile this driver as a module, choose M here: the
299 module will be called keyspan_pda.
300
301config USB_SERIAL_KEYSPAN
302 tristate "USB Keyspan USA-xxx Serial Driver"
303 select USB_EZUSB_FX2
304 ---help---
305 Say Y here if you want to use Keyspan USB to serial converter
306 devices. This driver makes use of Keyspan's official firmware
307 and was developed with their support. You must also include
308 firmware to support your particular device(s).
309
310 See <http://blemings.org/hugh/keyspan.html> for more information.
311
312 To compile this driver as a module, choose M here: the
313 module will be called keyspan.
314
315config USB_SERIAL_KEYSPAN_MPR
316 bool "USB Keyspan MPR Firmware"
317 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
318 help
319 Say Y here to include firmware for the Keyspan MPR converter.
320
321config USB_SERIAL_KEYSPAN_USA28
322 bool "USB Keyspan USA-28 Firmware"
323 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
324 help
325 Say Y here to include firmware for the USA-28 converter.
326
327config USB_SERIAL_KEYSPAN_USA28X
328 bool "USB Keyspan USA-28X Firmware"
329 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
330 help
331 Say Y here to include firmware for the USA-28X converter.
332 Be sure you have a USA-28X, there are also 28XA and 28XB
333 models, the label underneath has the actual part number.
334
335config USB_SERIAL_KEYSPAN_USA28XA
336 bool "USB Keyspan USA-28XA Firmware"
337 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
338 help
339 Say Y here to include firmware for the USA-28XA converter.
340 Be sure you have a USA-28XA, there are also 28X and 28XB
341 models, the label underneath has the actual part number.
342
343config USB_SERIAL_KEYSPAN_USA28XB
344 bool "USB Keyspan USA-28XB Firmware"
345 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
346 help
347 Say Y here to include firmware for the USA-28XB converter.
348 Be sure you have a USA-28XB, there are also 28X and 28XA
349 models, the label underneath has the actual part number.
350
351config USB_SERIAL_KEYSPAN_USA19
352 bool "USB Keyspan USA-19 Firmware"
353 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
354 help
355 Say Y here to include firmware for the USA-19 converter.
356
357config USB_SERIAL_KEYSPAN_USA18X
358 bool "USB Keyspan USA-18X Firmware"
359 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
360 help
361 Say Y here to include firmware for the USA-18X converter.
362
363config USB_SERIAL_KEYSPAN_USA19W
364 bool "USB Keyspan USA-19W Firmware"
365 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
366 help
367 Say Y here to include firmware for the USA-19W converter.
368
369config USB_SERIAL_KEYSPAN_USA19QW
370 bool "USB Keyspan USA-19QW Firmware"
371 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
372 help
373 Say Y here to include firmware for the USA-19QW converter.
374
375config USB_SERIAL_KEYSPAN_USA19QI
376 bool "USB Keyspan USA-19QI Firmware"
377 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
378 help
379 Say Y here to include firmware for the USA-19QI converter.
380
381config USB_SERIAL_KEYSPAN_USA49W
382 bool "USB Keyspan USA-49W Firmware"
383 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
384 help
385 Say Y here to include firmware for the USA-49W converter.
386
387config USB_SERIAL_KEYSPAN_USA49WLC
388 bool "USB Keyspan USA-49WLC Firmware"
389 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
390 help
391 Say Y here to include firmware for the USA-49WLC converter.
392
393config USB_SERIAL_KLSI
394 tristate "USB KL5KUSB105 (Palmconnect) Driver"
395 ---help---
396 Say Y here if you want to use a KL5KUSB105 - based single port
397 serial adapter. The most widely known -- and currently the only
398 tested -- device in this category is the PalmConnect USB Serial
399 adapter sold by Palm Inc. for use with their Palm III and Palm V
400 series PDAs.
401
402 Please read <file:Documentation/usb/usb-serial.txt> for more
403 information.
404
405 To compile this driver as a module, choose M here: the
406 module will be called kl5kusb105.
407
408config USB_SERIAL_KOBIL_SCT
409 tristate "USB KOBIL chipcard reader"
410 ---help---
411 Say Y here if you want to use one of the following KOBIL USB chipcard
412 readers:
413
414 - USB TWIN
415 - KAAN Standard Plus
416 - KAAN SIM
417 - SecOVID Reader Plus
418 - B1 Professional
419 - KAAN Professional
420
421 Note that you need a current CT-API.
422 To compile this driver as a module, choose M here: the
423 module will be called kobil_sct.
424
425config USB_SERIAL_MCT_U232
426 tristate "USB MCT Single Port Serial Driver"
427 ---help---
428 Say Y here if you want to use a USB Serial single port adapter from
429 Magic Control Technology Corp. (U232 is one of the model numbers).
430
431 This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
432 BAY, Belkin F5U109, and Belkin F5U409 devices.
433
434 To compile this driver as a module, choose M here: the
435 module will be called mct_u232.
436
437config USB_SERIAL_METRO
438 tristate "USB Metrologic Instruments USB-POS Barcode Scanner Driver"
439 ---help---
440 Say Y here if you want to use a USB POS Metrologic barcode scanner.
441
442 To compile this driver as a module, choose M here: the
443 module will be called metro-usb.
444
445config USB_SERIAL_MOS7720
446 tristate "USB Moschip 7720 Serial Driver"
447 ---help---
448 Say Y here if you want to use USB Serial single and double
449 port adapters from Moschip Semiconductor Tech.
450
451 To compile this driver as a module, choose M here: the
452 module will be called mos7720.
453
454config USB_SERIAL_MOS7715_PARPORT
455 bool "Support for parallel port on the Moschip 7715"
456 depends on USB_SERIAL_MOS7720
457 depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720
458 select PARPORT_NOT_PC
459 ---help---
460 Say Y if you have a Moschip 7715 device and would like to use
461 the parallel port it provides. The port will register with
462 the parport subsystem as a low-level driver.
463
464config USB_SERIAL_MOS7840
465 tristate "USB Moschip 7840/7820 USB Serial Driver"
466 ---help---
467 Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820
468 Dual-Serial port device from MosChip Semiconductor.
469
470 The MCS7840 and MCS7820 have been developed to connect a wide range
471 of standard serial devices to a USB host. The MCS7840 has a USB
472 device controller connected to four (4) individual UARTs while the
473 MCS7820 controller connects to two (2) individual UARTs.
474
475 To compile this driver as a module, choose M here: the
476 module will be called mos7840. If unsure, choose N.
477
478config USB_SERIAL_MXUPORT
479 tristate "USB Moxa UPORT Serial Driver"
480 ---help---
481 Say Y here if you want to use a MOXA UPort Serial hub.
482
483 This driver supports:
484
485 [2 Port]
486 - UPort 1250 : 2 Port RS-232/422/485 USB to Serial Hub
487 - UPort 1250I : 2 Port RS-232/422/485 USB to Serial Hub with
488 Isolation
489
490 [4 Port]
491 - UPort 1410 : 4 Port RS-232 USB to Serial Hub
492 - UPort 1450 : 4 Port RS-232/422/485 USB to Serial Hub
493 - UPort 1450I : 4 Port RS-232/422/485 USB to Serial Hub with
494 Isolation
495
496 [8 Port]
497 - UPort 1610-8 : 8 Port RS-232 USB to Serial Hub
498 - UPort 1650-8 : 8 Port RS-232/422/485 USB to Serial Hub
499
500 [16 Port]
501 - UPort 1610-16 : 16 Port RS-232 USB to Serial Hub
502 - UPort 1650-16 : 16 Port RS-232/422/485 USB to Serial Hub
503
504 To compile this driver as a module, choose M here: the
505 module will be called mxuport.
506
507config USB_SERIAL_NAVMAN
508 tristate "USB Navman GPS device"
509 help
510 To compile this driver as a module, choose M here: the
511 module will be called navman.
512
513config USB_SERIAL_PL2303
514 tristate "USB Prolific 2303 Single Port Serial Driver"
515 help
516 Say Y here if you want to use the PL2303 USB Serial single port
517 adapter from Prolific.
518
519 To compile this driver as a module, choose M here: the
520 module will be called pl2303.
521
522config USB_SERIAL_OTI6858
523 tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller"
524 help
525 Say Y here if you want to use the OTi-6858 single port USB to serial
526 converter device.
527
528 To compile this driver as a module, choose M here: the
529 module will be called oti6858.
530
531config USB_SERIAL_QCAUX
532 tristate "USB Qualcomm Auxiliary Serial Port Driver"
533 help
534 Say Y here if you want to use the auxiliary serial ports provided
535 by many modems based on Qualcomm chipsets. These ports often use
536 a proprietary protocol called DM and cannot be used for AT- or
537 PPP-based communication.
538
539 To compile this driver as a module, choose M here: the
540 module will be called qcaux. If unsure, choose N.
541
542config USB_SERIAL_QUALCOMM
543 tristate "USB Qualcomm Serial modem"
544 select USB_SERIAL_WWAN
545 help
546 Say Y here if you have a Qualcomm USB modem device. These are
547 usually wireless cellular modems.
548
549 To compile this driver as a module, choose M here: the
550 module will be called qcserial.
551
552config USB_SERIAL_SPCP8X5
553 tristate "USB SPCP8x5 USB To Serial Driver"
554 help
555 Say Y here if you want to use the spcp8x5 converter chip. This is
556 commonly found in some Z-Wave USB devices.
557
558 To compile this driver as a module, choose M here: the
559 module will be called spcp8x5.
560
561config USB_SERIAL_SAFE
562 tristate "USB Safe Serial (Encapsulated) Driver"
563
564config USB_SERIAL_SAFE_PADDED
565 bool "USB Secure Encapsulated Driver - Padded"
566 depends on USB_SERIAL_SAFE
567
568config USB_SERIAL_SIERRAWIRELESS
569 tristate "USB Sierra Wireless Driver"
570 help
571 Say M here if you want to use Sierra Wireless devices.
572
573 Many devices have a feature known as TRU-Install. For those devices
574 to work properly, the USB Storage Sierra feature must be enabled.
575
576 To compile this driver as a module, choose M here: the
577 module will be called sierra.
578
579config USB_SERIAL_SYMBOL
580 tristate "USB Symbol Barcode driver (serial mode)"
581 help
582 Say Y here if you want to use a Symbol USB Barcode device
583 in serial emulation mode.
584
585 To compile this driver as a module, choose M here: the
586 module will be called symbolserial.
587
588config USB_SERIAL_TI
589 tristate "USB TI 3410/5052 Serial Driver"
590 help
591 Say Y here if you want to use the TI USB 3410 or 5052
592 serial devices.
593
594 To compile this driver as a module, choose M here: the
595 module will be called ti_usb_3410_5052.
596
597config USB_SERIAL_CYBERJACK
598 tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader"
599 ---help---
600 Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
601 reader. This is an interface to ISO 7816 compatible contact-based
602 chipcards, e.g. GSM SIMs.
603
604 To compile this driver as a module, choose M here: the
605 module will be called cyberjack.
606
607 If unsure, say N.
608
609config USB_SERIAL_XIRCOM
610 tristate "USB Xircom / Entrega Single Port Serial Driver"
611 select USB_EZUSB_FX2
612 help
613 Say Y here if you want to use a Xircom or Entrega single port USB to
614 serial converter device. This driver makes use of firmware
615 developed from scratch by Brian Warner.
616
617 To compile this driver as a module, choose M here: the
618 module will be called keyspan_pda.
619
620config USB_SERIAL_WWAN
621 tristate
622
623config USB_SERIAL_OPTION
624 tristate "USB driver for GSM and CDMA modems"
625 select USB_SERIAL_WWAN
626 help
627 Say Y here if you have a GSM or CDMA modem that's connected to USB.
628
629 This driver also supports several PCMCIA cards which have a
630 built-in OHCI-USB adapter and an internally-connected GSM modem.
631 The USB bus on these cards is not accessible externally.
632
633 Supported devices include (some of?) those made by:
634 Option, Huawei, Audiovox, Novatel Wireless, or Anydata.
635
636 To compile this driver as a module, choose M here: the
637 module will be called option.
638
639 If this driver doesn't recognize your device,
640 it might be accessible via the FTDI_SIO driver.
641
642config USB_SERIAL_OMNINET
643 tristate "USB ZyXEL omni.net LCD Plus Driver"
644 help
645 Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
646
647 To compile this driver as a module, choose M here: the
648 module will be called omninet.
649
650config USB_SERIAL_OPTICON
651 tristate "USB Opticon Barcode driver (serial mode)"
652 help
653 Say Y here if you want to use a Opticon USB Barcode device
654 in serial emulation mode.
655
656 To compile this driver as a module, choose M here: the
657 module will be called opticon.
658
659config USB_SERIAL_XSENS_MT
660 tristate "Xsens motion tracker serial interface driver"
661 help
662 Say Y here if you want to use Xsens motion trackers.
663
664 This driver supports the new generation of motion trackers
665 by Xsens. Older devices can be accessed using the FTDI_SIO
666 driver.
667
668 To compile this driver as a module, choose M here: the
669 module will be called xsens_mt.
670
671config USB_SERIAL_WISHBONE
672 tristate "USB-Wishbone adapter interface driver"
673 help
674 Say Y here if you want to use a USB attached Wishbone bus.
675
676 Wishbone is an open hardware SoC bus commonly used in FPGA
677 designs. Bus access can be serialized using the Etherbone
678 protocol <http://www.ohwr.org/projects/etherbone-core>.
679
680 This driver is intended to be used with devices which attach
681 their internal Wishbone bus to a USB serial interface using
682 the Etherbone protocol. A userspace library is required to
683 speak the protocol made available by this driver as ttyUSBx.
684
685 To compile this driver as a module, choose M here: the
686 module will be called wishbone-serial.
687
688config USB_SERIAL_SSU100
689 tristate "USB Quatech SSU-100 Single Port Serial Driver"
690 help
691 Say Y here if you want to use the Quatech SSU-100 single
692 port usb to serial adapter.
693
694 To compile this driver as a module, choose M here: the
695 module will be called ssu100.
696
697config USB_SERIAL_QT2
698 tristate "USB Quatech Serial Driver for USB 2 devices"
699 help
700 Say Y here if you want to use the Quatech USB 2
701 serial adapters.
702
703 To compile this driver as a module, choose M here: the
704 module will be called quatech-serial.
705
706config USB_SERIAL_DEBUG
707 tristate "USB Debugging Device"
708 help
709 Say Y here if you have a USB debugging device used to receive
710 debugging data from another machine. The most common of these
711 devices is the NetChip TurboCONNECT device.
712
713 To compile this driver as a module, choose M here: the
714 module will be called usb-debug.
715
716endif # USB_SERIAL
1# SPDX-License-Identifier: GPL-2.0
2#
3# USB Serial device configuration
4#
5
6menuconfig USB_SERIAL
7 tristate "USB Serial Converter support"
8 depends on TTY
9 help
10 Say Y here if you have a USB device that provides normal serial
11 ports, or acts like a serial device, and you want to connect it to
12 your USB bus.
13
14 Please read <file:Documentation/usb/usb-serial.rst> for more
15 information on the specifics of the different devices that are
16 supported, and on how to use them.
17
18 To compile this driver as a module, choose M here: the
19 module will be called usbserial.
20
21if USB_SERIAL
22
23config USB_SERIAL_CONSOLE
24 bool "USB Serial Console device support"
25 depends on USB_SERIAL=y
26 help
27 If you say Y here, it will be possible to use a USB to serial
28 converter port as the system console (the system console is the
29 device which receives all kernel messages and warnings and which
30 allows logins in single user mode). This could be useful if some
31 terminal or printer is connected to that serial port.
32
33 Even if you say Y here, the currently visible virtual console
34 (/dev/tty0) will still be used as the system console by default, but
35 you can alter that using a kernel command line option such as
36 "console=ttyUSB0". (Try "man bootparam" or see the documentation of
37 your boot loader (lilo or loadlin) about how to pass options to the
38 kernel at boot time.)
39
40 If you don't have a VGA card installed and you say Y here, the
41 kernel will automatically use the first USB to serial converter
42 port, /dev/ttyUSB0, as system console.
43
44 If unsure, say N.
45
46config USB_SERIAL_GENERIC
47 bool "USB Generic Serial Driver"
48 help
49 Say Y here if you want to use the generic USB serial driver. Please
50 read <file:Documentation/usb/usb-serial.rst> for more information on
51 using this driver. It is recommended that the "USB Serial converter
52 support" be compiled as a module for this driver to be used
53 properly.
54
55config USB_SERIAL_SIMPLE
56 tristate "USB Serial Simple Driver"
57 help
58 Say Y here to use the USB serial "simple" driver. This driver
59 handles a wide range of very simple devices, all in one
60 driver. Specifically, it supports:
61 - Suunto ANT+ USB device.
62 - Medtronic CareLink USB device
63 - Fundamental Software dongle.
64 - Google USB serial devices
65 - HP4x calculators
66 - Libtransistor USB console
67 - a number of Motorola phones
68 - Motorola Tetra devices
69 - Nokia mobile phones
70 - Novatel Wireless GPS receivers
71 - Siemens USB/MPI adapter.
72 - ViVOtech ViVOpay USB device.
73 - Infineon Modem Flashloader USB interface
74 - ZIO Motherboard USB serial interface
75
76 To compile this driver as a module, choose M here: the module
77 will be called usb-serial-simple.
78
79config USB_SERIAL_AIRCABLE
80 tristate "USB AIRcable Bluetooth Dongle Driver"
81 help
82 Say Y here if you want to use USB AIRcable Bluetooth Dongle.
83
84 To compile this driver as a module, choose M here: the module
85 will be called aircable.
86
87config USB_SERIAL_ARK3116
88 tristate "USB ARK Micro 3116 USB Serial Driver"
89 help
90 Say Y here if you want to use a ARK Micro 3116 USB to Serial
91 device.
92
93 To compile this driver as a module, choose M here: the
94 module will be called ark3116
95
96config USB_SERIAL_BELKIN
97 tristate "USB Belkin and Peracom Single Port Serial Driver"
98 help
99 Say Y here if you want to use a Belkin USB Serial single port
100 adaptor (F5U103 is one of the model numbers) or the Peracom single
101 port USB to serial adapter.
102
103 To compile this driver as a module, choose M here: the
104 module will be called belkin_sa.
105
106config USB_SERIAL_CH341
107 tristate "USB Winchiphead CH341 Single Port Serial Driver"
108 help
109 Say Y here if you want to use a Winchiphead CH341 single port
110 USB to serial adapter.
111
112 To compile this driver as a module, choose M here: the
113 module will be called ch341.
114
115config USB_SERIAL_WHITEHEAT
116 tristate "USB ConnectTech WhiteHEAT Serial Driver"
117 select USB_EZUSB_FX2
118 help
119 Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
120 USB to serial converter device.
121
122 To compile this driver as a module, choose M here: the
123 module will be called whiteheat.
124
125config USB_SERIAL_DIGI_ACCELEPORT
126 tristate "USB Digi International AccelePort USB Serial Driver"
127 help
128 Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
129 2 port (plus parallel port) and 4 port USB serial converters. The
130 parallel port on the USB 2 appears as a third serial port on Linux.
131 The Digi Acceleport USB 8 is not yet supported by this driver.
132
133 To compile this driver as a module, choose M here: the
134 module will be called digi_acceleport.
135
136config USB_SERIAL_CP210X
137 tristate "USB CP210x family of UART Bridge Controllers"
138 help
139 Say Y here if you want to use a CP2101/CP2102/CP2103 based USB
140 to RS232 converters.
141
142 To compile this driver as a module, choose M here: the
143 module will be called cp210x.
144
145config USB_SERIAL_CYPRESS_M8
146 tristate "USB Cypress M8 USB Serial Driver"
147 help
148 Say Y here if you want to use a device that contains the Cypress
149 USB to Serial microcontroller, such as the DeLorme Earthmate GPS.
150
151 Attempted SMP support... send bug reports!
152
153 Supported microcontrollers in the CY4601 family are:
154 CY7C63741 CY7C63742 CY7C63743 CY7C64013
155
156 To compile this driver as a module, choose M here: the
157 module will be called cypress_m8.
158
159config USB_SERIAL_EMPEG
160 tristate "USB Empeg empeg-car Mark I/II Driver"
161 help
162 Say Y here if you want to connect to your Empeg empeg-car Mark I/II
163 mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...}
164 device node. See <file:Documentation/usb/usb-serial.rst> for more
165 tidbits of information.
166
167 To compile this driver as a module, choose M here: the
168 module will be called empeg.
169
170config USB_SERIAL_FTDI_SIO
171 tristate "USB FTDI Single Port Serial Driver"
172 help
173 Say Y here if you want to use a FTDI SIO single port USB to serial
174 converter device. The implementation I have is called the USC-1000.
175 This driver has also been tested with the 245 and 232 devices.
176
177 See <http://ftdi-usb-sio.sourceforge.net/> for more
178 information on this driver and the device.
179
180 To compile this driver as a module, choose M here: the
181 module will be called ftdi_sio.
182
183config USB_SERIAL_VISOR
184 tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
185 help
186 Say Y here if you want to connect to your HandSpring Visor, Palm
187 m500 or m505 through its USB docking station. See
188 <http://usbvisor.sourceforge.net/index.php3> for more information on using this
189 driver.
190
191 To compile this driver as a module, choose M here: the
192 module will be called visor.
193
194config USB_SERIAL_IPAQ
195 tristate "USB PocketPC PDA Driver"
196 help
197 Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
198 or any other PDA running Windows CE 3.0 or PocketPC 2002
199 using a USB cradle/cable. For information on using the driver,
200 read <file:Documentation/usb/usb-serial.rst>.
201
202 To compile this driver as a module, choose M here: the
203 module will be called ipaq.
204
205config USB_SERIAL_IR
206 tristate "USB IR Dongle Serial Driver"
207 help
208 Say Y here if you want to enable simple serial support for USB IrDA
209 devices. This is useful if you do not want to use the full IrDA
210 stack.
211
212 To compile this driver as a module, choose M here: the
213 module will be called ir-usb.
214
215config USB_SERIAL_EDGEPORT
216 tristate "USB Inside Out Edgeport Serial Driver"
217 help
218 Say Y here if you want to use any of the following devices from
219 Inside Out Networks (Digi):
220 Edgeport/4
221 Rapidport/4
222 Edgeport/4t
223 Edgeport/2
224 Edgeport/4i
225 Edgeport/2i
226 Edgeport/421
227 Edgeport/21
228 Edgeport/8
229 Edgeport/8 Dual
230 Edgeport/2D8
231 Edgeport/4D8
232 Edgeport/8i
233 Edgeport/2 DIN
234 Edgeport/4 DIN
235 Edgeport/16 Dual
236
237 To compile this driver as a module, choose M here: the
238 module will be called io_edgeport.
239
240config USB_SERIAL_EDGEPORT_TI
241 tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
242 help
243 Say Y here if you want to use any of the devices from Inside Out
244 Networks (Digi) that are not supported by the io_edgeport driver.
245 This includes the Edgeport/1 device.
246
247 To compile this driver as a module, choose M here: the
248 module will be called io_ti.
249
250config USB_SERIAL_F81232
251 tristate "USB Fintek F81232 Single Port Serial Driver"
252 help
253 Say Y here if you want to use the Fintek F81232 single
254 port usb to serial adapter.
255
256 To compile this driver as a module, choose M here: the
257 module will be called f81232.
258
259config USB_SERIAL_F8153X
260 tristate "USB Fintek F81532/534 Multi-Ports Serial Driver"
261 help
262 Say Y here if you want to use the Fintek F81532/534 Multi-Ports
263 USB to serial adapter.
264
265 To compile this driver as a module, choose M here: the
266 module will be called f81534.
267
268
269config USB_SERIAL_GARMIN
270 tristate "USB Garmin GPS driver"
271 help
272 Say Y here if you want to connect to your Garmin GPS.
273 Should work with most Garmin GPS devices which have a native USB port.
274
275 See <http://sourceforge.net/projects/garmin-gps> for the latest
276 version of the driver.
277
278 To compile this driver as a module, choose M here: the
279 module will be called garmin_gps.
280
281config USB_SERIAL_IPW
282 tristate "USB IPWireless (3G UMTS TDD) Driver"
283 select USB_SERIAL_WWAN
284 help
285 Say Y here if you want to use a IPWireless USB modem such as
286 the ones supplied by Axity3G/Sentech South Africa.
287
288 To compile this driver as a module, choose M here: the
289 module will be called ipw.
290
291config USB_SERIAL_IUU
292 tristate "USB Infinity USB Unlimited Phoenix Driver"
293 help
294 Say Y here if you want to use a IUU in phoenix mode and get
295 an extra ttyUSBx device. More information available on
296 http://eczema.ecze.com/iuu_phoenix.html
297
298 To compile this driver as a module, choose M here: the
299 module will be called iuu_phoenix.o
300
301config USB_SERIAL_KEYSPAN_PDA
302 tristate "USB Keyspan PDA / Xircom Single Port Serial Driver"
303 select USB_EZUSB_FX2
304 help
305 Say Y here if you want to use a Keyspan PDA, Xircom or Entrega single
306 port USB to serial converter device. This driver makes use of
307 firmware developed from scratch by Brian Warner.
308
309 To compile this driver as a module, choose M here: the
310 module will be called keyspan_pda.
311
312config USB_SERIAL_KEYSPAN
313 tristate "USB Keyspan USA-xxx Serial Driver"
314 select USB_EZUSB_FX2
315 help
316 Say Y here if you want to use Keyspan USB to serial converter
317 devices. This driver makes use of Keyspan's official firmware
318 and was developed with their support. You must also include
319 firmware to support your particular device(s).
320
321 See <http://blemings.org/hugh/keyspan.html> for more information.
322
323 To compile this driver as a module, choose M here: the
324 module will be called keyspan.
325
326config USB_SERIAL_KLSI
327 tristate "USB KL5KUSB105 (Palmconnect) Driver"
328 help
329 Say Y here if you want to use a KL5KUSB105 - based single port
330 serial adapter. The most widely known -- and currently the only
331 tested -- device in this category is the PalmConnect USB Serial
332 adapter sold by Palm Inc. for use with their Palm III and Palm V
333 series PDAs.
334
335 Please read <file:Documentation/usb/usb-serial.rst> for more
336 information.
337
338 To compile this driver as a module, choose M here: the
339 module will be called kl5kusb105.
340
341config USB_SERIAL_KOBIL_SCT
342 tristate "USB KOBIL chipcard reader"
343 help
344 Say Y here if you want to use one of the following KOBIL USB chipcard
345 readers:
346
347 - USB TWIN
348 - KAAN Standard Plus
349 - KAAN SIM
350 - SecOVID Reader Plus
351 - B1 Professional
352 - KAAN Professional
353
354 Note that you need a current CT-API.
355 To compile this driver as a module, choose M here: the
356 module will be called kobil_sct.
357
358config USB_SERIAL_MCT_U232
359 tristate "USB MCT Single Port Serial Driver"
360 help
361 Say Y here if you want to use a USB Serial single port adapter from
362 Magic Control Technology Corp. (U232 is one of the model numbers).
363
364 This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
365 BAY, Belkin F5U109, and Belkin F5U409 devices.
366
367 To compile this driver as a module, choose M here: the
368 module will be called mct_u232.
369
370config USB_SERIAL_METRO
371 tristate "USB Metrologic Instruments USB-POS Barcode Scanner Driver"
372 help
373 Say Y here if you want to use a USB POS Metrologic barcode scanner.
374
375 To compile this driver as a module, choose M here: the
376 module will be called metro-usb.
377
378config USB_SERIAL_MOS7720
379 tristate "USB Moschip 7720 Serial Driver"
380 help
381 Say Y here if you want to use USB Serial single and double
382 port adapters from Moschip Semiconductor Tech.
383
384 To compile this driver as a module, choose M here: the
385 module will be called mos7720.
386
387config USB_SERIAL_MOS7715_PARPORT
388 bool "Support for parallel port on the Moschip 7715"
389 depends on USB_SERIAL_MOS7720
390 depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720
391 select PARPORT_NOT_PC
392 help
393 Say Y if you have a Moschip 7715 device and would like to use
394 the parallel port it provides. The port will register with
395 the parport subsystem as a low-level driver.
396
397config USB_SERIAL_MOS7840
398 tristate "USB Moschip 7840/7820 USB Serial Driver"
399 help
400 Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820
401 Dual-Serial port device from MosChip Semiconductor.
402
403 The MCS7840 and MCS7820 have been developed to connect a wide range
404 of standard serial devices to a USB host. The MCS7840 has a USB
405 device controller connected to four (4) individual UARTs while the
406 MCS7820 controller connects to two (2) individual UARTs.
407
408 To compile this driver as a module, choose M here: the
409 module will be called mos7840. If unsure, choose N.
410
411config USB_SERIAL_MXUPORT
412 tristate "USB Moxa UPORT Serial Driver"
413 help
414 Say Y here if you want to use a MOXA UPort Serial hub.
415
416 This driver supports:
417
418 [2 Port]
419 - UPort 1250 : 2 Port RS-232/422/485 USB to Serial Hub
420 - UPort 1250I : 2 Port RS-232/422/485 USB to Serial Hub with
421 Isolation
422
423 [4 Port]
424 - UPort 1410 : 4 Port RS-232 USB to Serial Hub
425 - UPort 1450 : 4 Port RS-232/422/485 USB to Serial Hub
426 - UPort 1450I : 4 Port RS-232/422/485 USB to Serial Hub with
427 Isolation
428
429 [8 Port]
430 - UPort 1610-8 : 8 Port RS-232 USB to Serial Hub
431 - UPort 1650-8 : 8 Port RS-232/422/485 USB to Serial Hub
432
433 [16 Port]
434 - UPort 1610-16 : 16 Port RS-232 USB to Serial Hub
435 - UPort 1650-16 : 16 Port RS-232/422/485 USB to Serial Hub
436
437 To compile this driver as a module, choose M here: the
438 module will be called mxuport.
439
440config USB_SERIAL_NAVMAN
441 tristate "USB Navman GPS device"
442 help
443 To compile this driver as a module, choose M here: the
444 module will be called navman.
445
446config USB_SERIAL_PL2303
447 tristate "USB Prolific 2303 Single Port Serial Driver"
448 help
449 Say Y here if you want to use the PL2303 USB Serial single port
450 adapter from Prolific.
451
452 To compile this driver as a module, choose M here: the
453 module will be called pl2303.
454
455config USB_SERIAL_OTI6858
456 tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller"
457 help
458 Say Y here if you want to use the OTi-6858 single port USB to serial
459 converter device.
460
461 To compile this driver as a module, choose M here: the
462 module will be called oti6858.
463
464config USB_SERIAL_QCAUX
465 tristate "USB Qualcomm Auxiliary Serial Port Driver"
466 help
467 Say Y here if you want to use the auxiliary serial ports provided
468 by many modems based on Qualcomm chipsets. These ports often use
469 a proprietary protocol called DM and cannot be used for AT- or
470 PPP-based communication.
471
472 To compile this driver as a module, choose M here: the
473 module will be called qcaux. If unsure, choose N.
474
475config USB_SERIAL_QUALCOMM
476 tristate "USB Qualcomm Serial modem"
477 select USB_SERIAL_WWAN
478 help
479 Say Y here if you have a Qualcomm USB modem device. These are
480 usually wireless cellular modems.
481
482 To compile this driver as a module, choose M here: the
483 module will be called qcserial.
484
485config USB_SERIAL_SPCP8X5
486 tristate "USB SPCP8x5 USB To Serial Driver"
487 help
488 Say Y here if you want to use the spcp8x5 converter chip. This is
489 commonly found in some Z-Wave USB devices.
490
491 To compile this driver as a module, choose M here: the
492 module will be called spcp8x5.
493
494config USB_SERIAL_SAFE
495 tristate "USB Safe Serial (Encapsulated) Driver"
496
497config USB_SERIAL_SAFE_PADDED
498 bool "USB Secure Encapsulated Driver - Padded"
499 depends on USB_SERIAL_SAFE
500
501config USB_SERIAL_SIERRAWIRELESS
502 tristate "USB Sierra Wireless Driver"
503 help
504 Say M here if you want to use Sierra Wireless devices.
505
506 Many devices have a feature known as TRU-Install. For those devices
507 to work properly, the USB Storage Sierra feature must be enabled.
508
509 To compile this driver as a module, choose M here: the
510 module will be called sierra.
511
512config USB_SERIAL_SYMBOL
513 tristate "USB Symbol Barcode driver (serial mode)"
514 help
515 Say Y here if you want to use a Symbol USB Barcode device
516 in serial emulation mode.
517
518 To compile this driver as a module, choose M here: the
519 module will be called symbolserial.
520
521config USB_SERIAL_TI
522 tristate "USB TI 3410/5052 Serial Driver"
523 help
524 Say Y here if you want to use the TI USB 3410 or 5052
525 serial devices.
526
527 To compile this driver as a module, choose M here: the
528 module will be called ti_usb_3410_5052.
529
530config USB_SERIAL_CYBERJACK
531 tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader"
532 help
533 Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
534 reader. This is an interface to ISO 7816 compatible contact-based
535 chipcards, e.g. GSM SIMs.
536
537 To compile this driver as a module, choose M here: the
538 module will be called cyberjack.
539
540 If unsure, say N.
541
542config USB_SERIAL_WWAN
543 tristate
544
545config USB_SERIAL_OPTION
546 tristate "USB driver for GSM and CDMA modems"
547 select USB_SERIAL_WWAN
548 help
549 Say Y here if you have a GSM or CDMA modem that's connected to USB.
550
551 This driver also supports several PCMCIA cards which have a
552 built-in OHCI-USB adapter and an internally-connected GSM modem.
553 The USB bus on these cards is not accessible externally.
554
555 Supported devices include (some of?) those made by:
556 Option, Huawei, Audiovox, Novatel Wireless, or Anydata.
557
558 To compile this driver as a module, choose M here: the
559 module will be called option.
560
561 If this driver doesn't recognize your device,
562 it might be accessible via the FTDI_SIO driver.
563
564config USB_SERIAL_OMNINET
565 tristate "USB ZyXEL omni.net LCD Plus Driver"
566 help
567 Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
568
569 To compile this driver as a module, choose M here: the
570 module will be called omninet.
571
572config USB_SERIAL_OPTICON
573 tristate "USB Opticon Barcode driver (serial mode)"
574 help
575 Say Y here if you want to use a Opticon USB Barcode device
576 in serial emulation mode.
577
578 To compile this driver as a module, choose M here: the
579 module will be called opticon.
580
581config USB_SERIAL_XSENS_MT
582 tristate "Xsens motion tracker serial interface driver"
583 help
584 Say Y here if you want to use Xsens motion trackers.
585
586 This driver supports the new generation of motion trackers
587 by Xsens. Older devices can be accessed using the FTDI_SIO
588 driver.
589
590 To compile this driver as a module, choose M here: the
591 module will be called xsens_mt.
592
593config USB_SERIAL_WISHBONE
594 tristate "USB-Wishbone adapter interface driver"
595 help
596 Say Y here if you want to use a USB attached Wishbone bus.
597
598 Wishbone is an open hardware SoC bus commonly used in FPGA
599 designs. Bus access can be serialized using the Etherbone
600 protocol <http://www.ohwr.org/projects/etherbone-core>.
601
602 This driver is intended to be used with devices which attach
603 their internal Wishbone bus to a USB serial interface using
604 the Etherbone protocol. A userspace library is required to
605 speak the protocol made available by this driver as ttyUSBx.
606
607 To compile this driver as a module, choose M here: the
608 module will be called wishbone-serial.
609
610config USB_SERIAL_SSU100
611 tristate "USB Quatech SSU-100 Single Port Serial Driver"
612 help
613 Say Y here if you want to use the Quatech SSU-100 single
614 port usb to serial adapter.
615
616 To compile this driver as a module, choose M here: the
617 module will be called ssu100.
618
619config USB_SERIAL_QT2
620 tristate "USB Quatech Serial Driver for USB 2 devices"
621 help
622 Say Y here if you want to use the Quatech USB 2
623 serial adapters.
624
625 To compile this driver as a module, choose M here: the
626 module will be called quatech-serial.
627
628config USB_SERIAL_UPD78F0730
629 tristate "USB Renesas uPD78F0730 Single Port Serial Driver"
630 help
631 Say Y here if you want to use the Renesas uPD78F0730
632 serial driver.
633
634 To compile this driver as a module, choose M here: the
635 module will be called upd78f0730.
636
637config USB_SERIAL_XR
638 tristate "USB MaxLinear/Exar USB to Serial driver"
639 help
640 Say Y here if you want to use MaxLinear/Exar USB to Serial converter
641 devices.
642
643 To compile this driver as a module, choose M here: the
644 module will be called xr_serial.
645
646config USB_SERIAL_DEBUG
647 tristate "USB Debugging Device"
648 help
649 Say Y here if you have a USB debugging device used to receive
650 debugging data from another machine. The most common of these
651 devices is the NetChip TurboCONNECT device.
652
653 To compile this driver as a module, choose M here: the
654 module will be called usb-debug.
655
656endif # USB_SERIAL