Loading...
1/*
2 * An I2C driver for the Epson RX8581 RTC
3 *
4 * Author: Martyn Welch <martyn.welch@ge.com>
5 * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 *
11 * Based on: rtc-pcf8563.c (An I2C driver for the Philips PCF8563 RTC)
12 * Copyright 2005-06 Tower Technologies
13 */
14
15#include <linux/module.h>
16#include <linux/i2c.h>
17#include <linux/bcd.h>
18#include <linux/rtc.h>
19#include <linux/log2.h>
20
21#define DRV_VERSION "0.1"
22
23#define RX8581_REG_SC 0x00 /* Second in BCD */
24#define RX8581_REG_MN 0x01 /* Minute in BCD */
25#define RX8581_REG_HR 0x02 /* Hour in BCD */
26#define RX8581_REG_DW 0x03 /* Day of Week */
27#define RX8581_REG_DM 0x04 /* Day of Month in BCD */
28#define RX8581_REG_MO 0x05 /* Month in BCD */
29#define RX8581_REG_YR 0x06 /* Year in BCD */
30#define RX8581_REG_RAM 0x07 /* RAM */
31#define RX8581_REG_AMN 0x08 /* Alarm Min in BCD*/
32#define RX8581_REG_AHR 0x09 /* Alarm Hour in BCD */
33#define RX8581_REG_ADM 0x0A
34#define RX8581_REG_ADW 0x0A
35#define RX8581_REG_TMR0 0x0B
36#define RX8581_REG_TMR1 0x0C
37#define RX8581_REG_EXT 0x0D /* Extension Register */
38#define RX8581_REG_FLAG 0x0E /* Flag Register */
39#define RX8581_REG_CTRL 0x0F /* Control Register */
40
41
42/* Flag Register bit definitions */
43#define RX8581_FLAG_UF 0x20 /* Update */
44#define RX8581_FLAG_TF 0x10 /* Timer */
45#define RX8581_FLAG_AF 0x08 /* Alarm */
46#define RX8581_FLAG_VLF 0x02 /* Voltage Low */
47
48/* Control Register bit definitions */
49#define RX8581_CTRL_UIE 0x20 /* Update Interrupt Enable */
50#define RX8581_CTRL_TIE 0x10 /* Timer Interrupt Enable */
51#define RX8581_CTRL_AIE 0x08 /* Alarm Interrupt Enable */
52#define RX8581_CTRL_STOP 0x02 /* STOP bit */
53#define RX8581_CTRL_RESET 0x01 /* RESET bit */
54
55struct rx8581 {
56 struct i2c_client *client;
57 struct rtc_device *rtc;
58 s32 (*read_block_data)(const struct i2c_client *client, u8 command,
59 u8 length, u8 *values);
60 s32 (*write_block_data)(const struct i2c_client *client, u8 command,
61 u8 length, const u8 *values);
62};
63
64static struct i2c_driver rx8581_driver;
65
66static int rx8581_read_block_data(const struct i2c_client *client, u8 command,
67 u8 length, u8 *values)
68{
69 s32 i, data;
70
71 for (i = 0; i < length; i++) {
72 data = i2c_smbus_read_byte_data(client, command + i);
73 if (data < 0)
74 return data;
75 values[i] = data;
76 }
77 return i;
78}
79
80static int rx8581_write_block_data(const struct i2c_client *client, u8 command,
81 u8 length, const u8 *values)
82{
83 s32 i, ret;
84
85 for (i = 0; i < length; i++) {
86 ret = i2c_smbus_write_byte_data(client, command + i,
87 values[i]);
88 if (ret < 0)
89 return ret;
90 }
91 return length;
92}
93
94/*
95 * In the routines that deal directly with the rx8581 hardware, we use
96 * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch.
97 */
98static int rx8581_get_datetime(struct i2c_client *client, struct rtc_time *tm)
99{
100 unsigned char date[7];
101 int data, err;
102 struct rx8581 *rx8581 = i2c_get_clientdata(client);
103
104 /* First we ensure that the "update flag" is not set, we read the
105 * time and date then re-read the "update flag". If the update flag
106 * has been set, we know that the time has changed during the read so
107 * we repeat the whole process again.
108 */
109 data = i2c_smbus_read_byte_data(client, RX8581_REG_FLAG);
110 if (data < 0) {
111 dev_err(&client->dev, "Unable to read device flags\n");
112 return -EIO;
113 }
114
115 do {
116 /* If update flag set, clear it */
117 if (data & RX8581_FLAG_UF) {
118 err = i2c_smbus_write_byte_data(client,
119 RX8581_REG_FLAG, (data & ~RX8581_FLAG_UF));
120 if (err != 0) {
121 dev_err(&client->dev, "Unable to write device flags\n");
122 return -EIO;
123 }
124 }
125
126 /* Now read time and date */
127 err = rx8581->read_block_data(client, RX8581_REG_SC,
128 7, date);
129 if (err < 0) {
130 dev_err(&client->dev, "Unable to read date\n");
131 return -EIO;
132 }
133
134 /* Check flag register */
135 data = i2c_smbus_read_byte_data(client, RX8581_REG_FLAG);
136 if (data < 0) {
137 dev_err(&client->dev, "Unable to read device flags\n");
138 return -EIO;
139 }
140 } while (data & RX8581_FLAG_UF);
141
142 if (data & RX8581_FLAG_VLF)
143 dev_info(&client->dev,
144 "low voltage detected, date/time is not reliable.\n");
145
146 dev_dbg(&client->dev,
147 "%s: raw data is sec=%02x, min=%02x, hr=%02x, "
148 "wday=%02x, mday=%02x, mon=%02x, year=%02x\n",
149 __func__,
150 date[0], date[1], date[2], date[3], date[4], date[5], date[6]);
151
152 tm->tm_sec = bcd2bin(date[RX8581_REG_SC] & 0x7F);
153 tm->tm_min = bcd2bin(date[RX8581_REG_MN] & 0x7F);
154 tm->tm_hour = bcd2bin(date[RX8581_REG_HR] & 0x3F); /* rtc hr 0-23 */
155 tm->tm_wday = ilog2(date[RX8581_REG_DW] & 0x7F);
156 tm->tm_mday = bcd2bin(date[RX8581_REG_DM] & 0x3F);
157 tm->tm_mon = bcd2bin(date[RX8581_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */
158 tm->tm_year = bcd2bin(date[RX8581_REG_YR]);
159 if (tm->tm_year < 70)
160 tm->tm_year += 100; /* assume we are in 1970...2069 */
161
162
163 dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
164 "mday=%d, mon=%d, year=%d, wday=%d\n",
165 __func__,
166 tm->tm_sec, tm->tm_min, tm->tm_hour,
167 tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
168
169 err = rtc_valid_tm(tm);
170 if (err < 0)
171 dev_err(&client->dev, "retrieved date/time is not valid.\n");
172
173 return err;
174}
175
176static int rx8581_set_datetime(struct i2c_client *client, struct rtc_time *tm)
177{
178 int data, err;
179 unsigned char buf[7];
180 struct rx8581 *rx8581 = i2c_get_clientdata(client);
181
182 dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, "
183 "mday=%d, mon=%d, year=%d, wday=%d\n",
184 __func__,
185 tm->tm_sec, tm->tm_min, tm->tm_hour,
186 tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
187
188 /* hours, minutes and seconds */
189 buf[RX8581_REG_SC] = bin2bcd(tm->tm_sec);
190 buf[RX8581_REG_MN] = bin2bcd(tm->tm_min);
191 buf[RX8581_REG_HR] = bin2bcd(tm->tm_hour);
192
193 buf[RX8581_REG_DM] = bin2bcd(tm->tm_mday);
194
195 /* month, 1 - 12 */
196 buf[RX8581_REG_MO] = bin2bcd(tm->tm_mon + 1);
197
198 /* year and century */
199 buf[RX8581_REG_YR] = bin2bcd(tm->tm_year % 100);
200 buf[RX8581_REG_DW] = (0x1 << tm->tm_wday);
201
202 /* Stop the clock */
203 data = i2c_smbus_read_byte_data(client, RX8581_REG_CTRL);
204 if (data < 0) {
205 dev_err(&client->dev, "Unable to read control register\n");
206 return -EIO;
207 }
208
209 err = i2c_smbus_write_byte_data(client, RX8581_REG_CTRL,
210 (data | RX8581_CTRL_STOP));
211 if (err < 0) {
212 dev_err(&client->dev, "Unable to write control register\n");
213 return -EIO;
214 }
215
216 /* write register's data */
217 err = rx8581->write_block_data(client, RX8581_REG_SC, 7, buf);
218 if (err < 0) {
219 dev_err(&client->dev, "Unable to write to date registers\n");
220 return -EIO;
221 }
222
223 /* get VLF and clear it */
224 data = i2c_smbus_read_byte_data(client, RX8581_REG_FLAG);
225 if (data < 0) {
226 dev_err(&client->dev, "Unable to read flag register\n");
227 return -EIO;
228 }
229
230 err = i2c_smbus_write_byte_data(client, RX8581_REG_FLAG,
231 (data & ~(RX8581_FLAG_VLF)));
232 if (err != 0) {
233 dev_err(&client->dev, "Unable to write flag register\n");
234 return -EIO;
235 }
236
237 /* Restart the clock */
238 data = i2c_smbus_read_byte_data(client, RX8581_REG_CTRL);
239 if (data < 0) {
240 dev_err(&client->dev, "Unable to read control register\n");
241 return -EIO;
242 }
243
244 err = i2c_smbus_write_byte_data(client, RX8581_REG_CTRL,
245 (data & ~(RX8581_CTRL_STOP)));
246 if (err != 0) {
247 dev_err(&client->dev, "Unable to write control register\n");
248 return -EIO;
249 }
250
251 return 0;
252}
253
254static int rx8581_rtc_read_time(struct device *dev, struct rtc_time *tm)
255{
256 return rx8581_get_datetime(to_i2c_client(dev), tm);
257}
258
259static int rx8581_rtc_set_time(struct device *dev, struct rtc_time *tm)
260{
261 return rx8581_set_datetime(to_i2c_client(dev), tm);
262}
263
264static const struct rtc_class_ops rx8581_rtc_ops = {
265 .read_time = rx8581_rtc_read_time,
266 .set_time = rx8581_rtc_set_time,
267};
268
269static int rx8581_probe(struct i2c_client *client,
270 const struct i2c_device_id *id)
271{
272 struct rx8581 *rx8581;
273
274 dev_dbg(&client->dev, "%s\n", __func__);
275
276 if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)
277 && !i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
278 return -EIO;
279
280 rx8581 = devm_kzalloc(&client->dev, sizeof(struct rx8581), GFP_KERNEL);
281 if (!rx8581)
282 return -ENOMEM;
283
284 i2c_set_clientdata(client, rx8581);
285 rx8581->client = client;
286
287 if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) {
288 rx8581->read_block_data = i2c_smbus_read_i2c_block_data;
289 rx8581->write_block_data = i2c_smbus_write_i2c_block_data;
290 } else {
291 rx8581->read_block_data = rx8581_read_block_data;
292 rx8581->write_block_data = rx8581_write_block_data;
293 }
294
295 dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");
296
297 rx8581->rtc = devm_rtc_device_register(&client->dev,
298 rx8581_driver.driver.name, &rx8581_rtc_ops, THIS_MODULE);
299
300 if (IS_ERR(rx8581->rtc)) {
301 dev_err(&client->dev,
302 "unable to register the class device\n");
303 return PTR_ERR(rx8581->rtc);
304 }
305
306 return 0;
307}
308
309static const struct i2c_device_id rx8581_id[] = {
310 { "rx8581", 0 },
311 { }
312};
313MODULE_DEVICE_TABLE(i2c, rx8581_id);
314
315static struct i2c_driver rx8581_driver = {
316 .driver = {
317 .name = "rtc-rx8581",
318 },
319 .probe = rx8581_probe,
320 .id_table = rx8581_id,
321};
322
323module_i2c_driver(rx8581_driver);
324
325MODULE_AUTHOR("Martyn Welch <martyn.welch@ge.com>");
326MODULE_DESCRIPTION("Epson RX-8581 RTC driver");
327MODULE_LICENSE("GPL");
328MODULE_VERSION(DRV_VERSION);
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * An I2C driver for the Epson RX8581 RTC
4 *
5 * Author: Martyn Welch <martyn.welch@ge.com>
6 * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
7 *
8 * Based on: rtc-pcf8563.c (An I2C driver for the Philips PCF8563 RTC)
9 * Copyright 2005-06 Tower Technologies
10 */
11
12#include <linux/module.h>
13#include <linux/i2c.h>
14#include <linux/bcd.h>
15#include <linux/of.h>
16#include <linux/of_device.h>
17#include <linux/regmap.h>
18#include <linux/rtc.h>
19#include <linux/log2.h>
20
21#define RX8581_REG_SC 0x00 /* Second in BCD */
22#define RX8581_REG_MN 0x01 /* Minute in BCD */
23#define RX8581_REG_HR 0x02 /* Hour in BCD */
24#define RX8581_REG_DW 0x03 /* Day of Week */
25#define RX8581_REG_DM 0x04 /* Day of Month in BCD */
26#define RX8581_REG_MO 0x05 /* Month in BCD */
27#define RX8581_REG_YR 0x06 /* Year in BCD */
28#define RX8581_REG_RAM 0x07 /* RAM */
29#define RX8581_REG_AMN 0x08 /* Alarm Min in BCD*/
30#define RX8581_REG_AHR 0x09 /* Alarm Hour in BCD */
31#define RX8581_REG_ADM 0x0A
32#define RX8581_REG_ADW 0x0A
33#define RX8581_REG_TMR0 0x0B
34#define RX8581_REG_TMR1 0x0C
35#define RX8581_REG_EXT 0x0D /* Extension Register */
36#define RX8581_REG_FLAG 0x0E /* Flag Register */
37#define RX8581_REG_CTRL 0x0F /* Control Register */
38
39
40/* Flag Register bit definitions */
41#define RX8581_FLAG_UF 0x20 /* Update */
42#define RX8581_FLAG_TF 0x10 /* Timer */
43#define RX8581_FLAG_AF 0x08 /* Alarm */
44#define RX8581_FLAG_VLF 0x02 /* Voltage Low */
45
46/* Control Register bit definitions */
47#define RX8581_CTRL_UIE 0x20 /* Update Interrupt Enable */
48#define RX8581_CTRL_TIE 0x10 /* Timer Interrupt Enable */
49#define RX8581_CTRL_AIE 0x08 /* Alarm Interrupt Enable */
50#define RX8581_CTRL_STOP 0x02 /* STOP bit */
51#define RX8581_CTRL_RESET 0x01 /* RESET bit */
52
53#define RX8571_USER_RAM 0x10
54#define RX8571_NVRAM_SIZE 0x10
55
56struct rx8581 {
57 struct regmap *regmap;
58 struct rtc_device *rtc;
59};
60
61struct rx85x1_config {
62 struct regmap_config regmap;
63 unsigned int num_nvram;
64};
65
66/*
67 * In the routines that deal directly with the rx8581 hardware, we use
68 * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch.
69 */
70static int rx8581_rtc_read_time(struct device *dev, struct rtc_time *tm)
71{
72 struct i2c_client *client = to_i2c_client(dev);
73 unsigned char date[7];
74 unsigned int data;
75 int err;
76 struct rx8581 *rx8581 = i2c_get_clientdata(client);
77
78 /* First we ensure that the "update flag" is not set, we read the
79 * time and date then re-read the "update flag". If the update flag
80 * has been set, we know that the time has changed during the read so
81 * we repeat the whole process again.
82 */
83 err = regmap_read(rx8581->regmap, RX8581_REG_FLAG, &data);
84 if (err < 0)
85 return err;
86
87 if (data & RX8581_FLAG_VLF) {
88 dev_warn(dev,
89 "low voltage detected, date/time is not reliable.\n");
90 return -EINVAL;
91 }
92
93 do {
94 /* If update flag set, clear it */
95 if (data & RX8581_FLAG_UF) {
96 err = regmap_write(rx8581->regmap, RX8581_REG_FLAG,
97 data & ~RX8581_FLAG_UF);
98 if (err < 0)
99 return err;
100 }
101
102 /* Now read time and date */
103 err = regmap_bulk_read(rx8581->regmap, RX8581_REG_SC, date,
104 sizeof(date));
105 if (err < 0)
106 return err;
107
108 /* Check flag register */
109 err = regmap_read(rx8581->regmap, RX8581_REG_FLAG, &data);
110 if (err < 0)
111 return err;
112 } while (data & RX8581_FLAG_UF);
113
114 dev_dbg(dev, "%s: raw data is sec=%02x, min=%02x, hr=%02x, "
115 "wday=%02x, mday=%02x, mon=%02x, year=%02x\n",
116 __func__,
117 date[0], date[1], date[2], date[3], date[4], date[5], date[6]);
118
119 tm->tm_sec = bcd2bin(date[RX8581_REG_SC] & 0x7F);
120 tm->tm_min = bcd2bin(date[RX8581_REG_MN] & 0x7F);
121 tm->tm_hour = bcd2bin(date[RX8581_REG_HR] & 0x3F); /* rtc hr 0-23 */
122 tm->tm_wday = ilog2(date[RX8581_REG_DW] & 0x7F);
123 tm->tm_mday = bcd2bin(date[RX8581_REG_DM] & 0x3F);
124 tm->tm_mon = bcd2bin(date[RX8581_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */
125 tm->tm_year = bcd2bin(date[RX8581_REG_YR]) + 100;
126
127 dev_dbg(dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
128 "mday=%d, mon=%d, year=%d, wday=%d\n",
129 __func__,
130 tm->tm_sec, tm->tm_min, tm->tm_hour,
131 tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
132
133 return 0;
134}
135
136static int rx8581_rtc_set_time(struct device *dev, struct rtc_time *tm)
137{
138 struct i2c_client *client = to_i2c_client(dev);
139 int err;
140 unsigned char buf[7];
141 struct rx8581 *rx8581 = i2c_get_clientdata(client);
142
143 dev_dbg(dev, "%s: secs=%d, mins=%d, hours=%d, "
144 "mday=%d, mon=%d, year=%d, wday=%d\n",
145 __func__,
146 tm->tm_sec, tm->tm_min, tm->tm_hour,
147 tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
148
149 /* hours, minutes and seconds */
150 buf[RX8581_REG_SC] = bin2bcd(tm->tm_sec);
151 buf[RX8581_REG_MN] = bin2bcd(tm->tm_min);
152 buf[RX8581_REG_HR] = bin2bcd(tm->tm_hour);
153
154 buf[RX8581_REG_DM] = bin2bcd(tm->tm_mday);
155
156 /* month, 1 - 12 */
157 buf[RX8581_REG_MO] = bin2bcd(tm->tm_mon + 1);
158
159 /* year and century */
160 buf[RX8581_REG_YR] = bin2bcd(tm->tm_year - 100);
161 buf[RX8581_REG_DW] = (0x1 << tm->tm_wday);
162
163 /* Stop the clock */
164 err = regmap_update_bits(rx8581->regmap, RX8581_REG_CTRL,
165 RX8581_CTRL_STOP, RX8581_CTRL_STOP);
166 if (err < 0)
167 return err;
168
169 /* write register's data */
170 err = regmap_bulk_write(rx8581->regmap, RX8581_REG_SC,
171 buf, sizeof(buf));
172 if (err < 0)
173 return err;
174
175 /* get VLF and clear it */
176 err = regmap_update_bits(rx8581->regmap, RX8581_REG_FLAG,
177 RX8581_FLAG_VLF, 0);
178 if (err < 0)
179 return err;
180
181 /* Restart the clock */
182 return regmap_update_bits(rx8581->regmap, RX8581_REG_CTRL,
183 RX8581_CTRL_STOP, 0);
184}
185
186static const struct rtc_class_ops rx8581_rtc_ops = {
187 .read_time = rx8581_rtc_read_time,
188 .set_time = rx8581_rtc_set_time,
189};
190
191static int rx8571_nvram_read(void *priv, unsigned int offset, void *val,
192 size_t bytes)
193{
194 struct rx8581 *rx8581 = priv;
195
196 return regmap_bulk_read(rx8581->regmap, RX8571_USER_RAM + offset,
197 val, bytes);
198}
199
200static int rx8571_nvram_write(void *priv, unsigned int offset, void *val,
201 size_t bytes)
202{
203 struct rx8581 *rx8581 = priv;
204
205 return regmap_bulk_write(rx8581->regmap, RX8571_USER_RAM + offset,
206 val, bytes);
207}
208
209static int rx85x1_nvram_read(void *priv, unsigned int offset, void *val,
210 size_t bytes)
211{
212 struct rx8581 *rx8581 = priv;
213 unsigned int tmp_val;
214 int ret;
215
216 ret = regmap_read(rx8581->regmap, RX8581_REG_RAM, &tmp_val);
217 (*(unsigned char *)val) = (unsigned char) tmp_val;
218
219 return ret;
220}
221
222static int rx85x1_nvram_write(void *priv, unsigned int offset, void *val,
223 size_t bytes)
224{
225 struct rx8581 *rx8581 = priv;
226 unsigned char tmp_val;
227
228 tmp_val = *((unsigned char *)val);
229 return regmap_write(rx8581->regmap, RX8581_REG_RAM,
230 (unsigned int)tmp_val);
231}
232
233static const struct rx85x1_config rx8581_config = {
234 .regmap = {
235 .reg_bits = 8,
236 .val_bits = 8,
237 .max_register = 0xf,
238 },
239 .num_nvram = 1
240};
241
242static const struct rx85x1_config rx8571_config = {
243 .regmap = {
244 .reg_bits = 8,
245 .val_bits = 8,
246 .max_register = 0x1f,
247 },
248 .num_nvram = 2
249};
250
251static int rx8581_probe(struct i2c_client *client,
252 const struct i2c_device_id *id)
253{
254 struct rx8581 *rx8581;
255 const struct rx85x1_config *config = &rx8581_config;
256 const void *data = of_device_get_match_data(&client->dev);
257 static struct nvmem_config nvmem_cfg[] = {
258 {
259 .name = "rx85x1-",
260 .word_size = 1,
261 .stride = 1,
262 .size = 1,
263 .reg_read = rx85x1_nvram_read,
264 .reg_write = rx85x1_nvram_write,
265 }, {
266 .name = "rx8571-",
267 .word_size = 1,
268 .stride = 1,
269 .size = RX8571_NVRAM_SIZE,
270 .reg_read = rx8571_nvram_read,
271 .reg_write = rx8571_nvram_write,
272 },
273 };
274 int ret, i;
275
276 dev_dbg(&client->dev, "%s\n", __func__);
277
278 if (data)
279 config = data;
280
281 rx8581 = devm_kzalloc(&client->dev, sizeof(struct rx8581), GFP_KERNEL);
282 if (!rx8581)
283 return -ENOMEM;
284
285 i2c_set_clientdata(client, rx8581);
286
287 rx8581->regmap = devm_regmap_init_i2c(client, &config->regmap);
288 if (IS_ERR(rx8581->regmap))
289 return PTR_ERR(rx8581->regmap);
290
291 rx8581->rtc = devm_rtc_allocate_device(&client->dev);
292 if (IS_ERR(rx8581->rtc))
293 return PTR_ERR(rx8581->rtc);
294
295 rx8581->rtc->ops = &rx8581_rtc_ops;
296 rx8581->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
297 rx8581->rtc->range_max = RTC_TIMESTAMP_END_2099;
298 rx8581->rtc->start_secs = 0;
299 rx8581->rtc->set_start_time = true;
300
301 ret = rtc_register_device(rx8581->rtc);
302
303 for (i = 0; i < config->num_nvram; i++) {
304 nvmem_cfg[i].priv = rx8581;
305 rtc_nvmem_register(rx8581->rtc, &nvmem_cfg[i]);
306 }
307
308 return ret;
309}
310
311static const struct i2c_device_id rx8581_id[] = {
312 { "rx8581", 0 },
313 { }
314};
315MODULE_DEVICE_TABLE(i2c, rx8581_id);
316
317static const struct of_device_id rx8581_of_match[] = {
318 { .compatible = "epson,rx8571", .data = &rx8571_config },
319 { .compatible = "epson,rx8581", .data = &rx8581_config },
320 { /* sentinel */ }
321};
322MODULE_DEVICE_TABLE(of, rx8581_of_match);
323
324static struct i2c_driver rx8581_driver = {
325 .driver = {
326 .name = "rtc-rx8581",
327 .of_match_table = of_match_ptr(rx8581_of_match),
328 },
329 .probe = rx8581_probe,
330 .id_table = rx8581_id,
331};
332
333module_i2c_driver(rx8581_driver);
334
335MODULE_AUTHOR("Martyn Welch <martyn.welch@ge.com>");
336MODULE_DESCRIPTION("Epson RX-8571/RX-8581 RTC driver");
337MODULE_LICENSE("GPL");