Loading...
1/*
2 * An I2C driver for the Epson RX8581 RTC
3 *
4 * Author: Martyn Welch <martyn.welch@ge.com>
5 * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 *
11 * Based on: rtc-pcf8563.c (An I2C driver for the Philips PCF8563 RTC)
12 * Copyright 2005-06 Tower Technologies
13 */
14
15#include <linux/module.h>
16#include <linux/i2c.h>
17#include <linux/bcd.h>
18#include <linux/rtc.h>
19#include <linux/log2.h>
20
21#define DRV_VERSION "0.1"
22
23#define RX8581_REG_SC 0x00 /* Second in BCD */
24#define RX8581_REG_MN 0x01 /* Minute in BCD */
25#define RX8581_REG_HR 0x02 /* Hour in BCD */
26#define RX8581_REG_DW 0x03 /* Day of Week */
27#define RX8581_REG_DM 0x04 /* Day of Month in BCD */
28#define RX8581_REG_MO 0x05 /* Month in BCD */
29#define RX8581_REG_YR 0x06 /* Year in BCD */
30#define RX8581_REG_RAM 0x07 /* RAM */
31#define RX8581_REG_AMN 0x08 /* Alarm Min in BCD*/
32#define RX8581_REG_AHR 0x09 /* Alarm Hour in BCD */
33#define RX8581_REG_ADM 0x0A
34#define RX8581_REG_ADW 0x0A
35#define RX8581_REG_TMR0 0x0B
36#define RX8581_REG_TMR1 0x0C
37#define RX8581_REG_EXT 0x0D /* Extension Register */
38#define RX8581_REG_FLAG 0x0E /* Flag Register */
39#define RX8581_REG_CTRL 0x0F /* Control Register */
40
41
42/* Flag Register bit definitions */
43#define RX8581_FLAG_UF 0x20 /* Update */
44#define RX8581_FLAG_TF 0x10 /* Timer */
45#define RX8581_FLAG_AF 0x08 /* Alarm */
46#define RX8581_FLAG_VLF 0x02 /* Voltage Low */
47
48/* Control Register bit definitions */
49#define RX8581_CTRL_UIE 0x20 /* Update Interrupt Enable */
50#define RX8581_CTRL_TIE 0x10 /* Timer Interrupt Enable */
51#define RX8581_CTRL_AIE 0x08 /* Alarm Interrupt Enable */
52#define RX8581_CTRL_STOP 0x02 /* STOP bit */
53#define RX8581_CTRL_RESET 0x01 /* RESET bit */
54
55struct rx8581 {
56 struct i2c_client *client;
57 struct rtc_device *rtc;
58 s32 (*read_block_data)(const struct i2c_client *client, u8 command,
59 u8 length, u8 *values);
60 s32 (*write_block_data)(const struct i2c_client *client, u8 command,
61 u8 length, const u8 *values);
62};
63
64static struct i2c_driver rx8581_driver;
65
66static int rx8581_read_block_data(const struct i2c_client *client, u8 command,
67 u8 length, u8 *values)
68{
69 s32 i, data;
70
71 for (i = 0; i < length; i++) {
72 data = i2c_smbus_read_byte_data(client, command + i);
73 if (data < 0)
74 return data;
75 values[i] = data;
76 }
77 return i;
78}
79
80static int rx8581_write_block_data(const struct i2c_client *client, u8 command,
81 u8 length, const u8 *values)
82{
83 s32 i, ret;
84
85 for (i = 0; i < length; i++) {
86 ret = i2c_smbus_write_byte_data(client, command + i,
87 values[i]);
88 if (ret < 0)
89 return ret;
90 }
91 return length;
92}
93
94/*
95 * In the routines that deal directly with the rx8581 hardware, we use
96 * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch.
97 */
98static int rx8581_get_datetime(struct i2c_client *client, struct rtc_time *tm)
99{
100 unsigned char date[7];
101 int data, err;
102 struct rx8581 *rx8581 = i2c_get_clientdata(client);
103
104 /* First we ensure that the "update flag" is not set, we read the
105 * time and date then re-read the "update flag". If the update flag
106 * has been set, we know that the time has changed during the read so
107 * we repeat the whole process again.
108 */
109 data = i2c_smbus_read_byte_data(client, RX8581_REG_FLAG);
110 if (data < 0) {
111 dev_err(&client->dev, "Unable to read device flags\n");
112 return -EIO;
113 }
114
115 do {
116 /* If update flag set, clear it */
117 if (data & RX8581_FLAG_UF) {
118 err = i2c_smbus_write_byte_data(client,
119 RX8581_REG_FLAG, (data & ~RX8581_FLAG_UF));
120 if (err != 0) {
121 dev_err(&client->dev, "Unable to write device flags\n");
122 return -EIO;
123 }
124 }
125
126 /* Now read time and date */
127 err = rx8581->read_block_data(client, RX8581_REG_SC,
128 7, date);
129 if (err < 0) {
130 dev_err(&client->dev, "Unable to read date\n");
131 return -EIO;
132 }
133
134 /* Check flag register */
135 data = i2c_smbus_read_byte_data(client, RX8581_REG_FLAG);
136 if (data < 0) {
137 dev_err(&client->dev, "Unable to read device flags\n");
138 return -EIO;
139 }
140 } while (data & RX8581_FLAG_UF);
141
142 if (data & RX8581_FLAG_VLF)
143 dev_info(&client->dev,
144 "low voltage detected, date/time is not reliable.\n");
145
146 dev_dbg(&client->dev,
147 "%s: raw data is sec=%02x, min=%02x, hr=%02x, "
148 "wday=%02x, mday=%02x, mon=%02x, year=%02x\n",
149 __func__,
150 date[0], date[1], date[2], date[3], date[4], date[5], date[6]);
151
152 tm->tm_sec = bcd2bin(date[RX8581_REG_SC] & 0x7F);
153 tm->tm_min = bcd2bin(date[RX8581_REG_MN] & 0x7F);
154 tm->tm_hour = bcd2bin(date[RX8581_REG_HR] & 0x3F); /* rtc hr 0-23 */
155 tm->tm_wday = ilog2(date[RX8581_REG_DW] & 0x7F);
156 tm->tm_mday = bcd2bin(date[RX8581_REG_DM] & 0x3F);
157 tm->tm_mon = bcd2bin(date[RX8581_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */
158 tm->tm_year = bcd2bin(date[RX8581_REG_YR]);
159 if (tm->tm_year < 70)
160 tm->tm_year += 100; /* assume we are in 1970...2069 */
161
162
163 dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
164 "mday=%d, mon=%d, year=%d, wday=%d\n",
165 __func__,
166 tm->tm_sec, tm->tm_min, tm->tm_hour,
167 tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
168
169 err = rtc_valid_tm(tm);
170 if (err < 0)
171 dev_err(&client->dev, "retrieved date/time is not valid.\n");
172
173 return err;
174}
175
176static int rx8581_set_datetime(struct i2c_client *client, struct rtc_time *tm)
177{
178 int data, err;
179 unsigned char buf[7];
180 struct rx8581 *rx8581 = i2c_get_clientdata(client);
181
182 dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, "
183 "mday=%d, mon=%d, year=%d, wday=%d\n",
184 __func__,
185 tm->tm_sec, tm->tm_min, tm->tm_hour,
186 tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
187
188 /* hours, minutes and seconds */
189 buf[RX8581_REG_SC] = bin2bcd(tm->tm_sec);
190 buf[RX8581_REG_MN] = bin2bcd(tm->tm_min);
191 buf[RX8581_REG_HR] = bin2bcd(tm->tm_hour);
192
193 buf[RX8581_REG_DM] = bin2bcd(tm->tm_mday);
194
195 /* month, 1 - 12 */
196 buf[RX8581_REG_MO] = bin2bcd(tm->tm_mon + 1);
197
198 /* year and century */
199 buf[RX8581_REG_YR] = bin2bcd(tm->tm_year % 100);
200 buf[RX8581_REG_DW] = (0x1 << tm->tm_wday);
201
202 /* Stop the clock */
203 data = i2c_smbus_read_byte_data(client, RX8581_REG_CTRL);
204 if (data < 0) {
205 dev_err(&client->dev, "Unable to read control register\n");
206 return -EIO;
207 }
208
209 err = i2c_smbus_write_byte_data(client, RX8581_REG_CTRL,
210 (data | RX8581_CTRL_STOP));
211 if (err < 0) {
212 dev_err(&client->dev, "Unable to write control register\n");
213 return -EIO;
214 }
215
216 /* write register's data */
217 err = rx8581->write_block_data(client, RX8581_REG_SC, 7, buf);
218 if (err < 0) {
219 dev_err(&client->dev, "Unable to write to date registers\n");
220 return -EIO;
221 }
222
223 /* get VLF and clear it */
224 data = i2c_smbus_read_byte_data(client, RX8581_REG_FLAG);
225 if (data < 0) {
226 dev_err(&client->dev, "Unable to read flag register\n");
227 return -EIO;
228 }
229
230 err = i2c_smbus_write_byte_data(client, RX8581_REG_FLAG,
231 (data & ~(RX8581_FLAG_VLF)));
232 if (err != 0) {
233 dev_err(&client->dev, "Unable to write flag register\n");
234 return -EIO;
235 }
236
237 /* Restart the clock */
238 data = i2c_smbus_read_byte_data(client, RX8581_REG_CTRL);
239 if (data < 0) {
240 dev_err(&client->dev, "Unable to read control register\n");
241 return -EIO;
242 }
243
244 err = i2c_smbus_write_byte_data(client, RX8581_REG_CTRL,
245 (data & ~(RX8581_CTRL_STOP)));
246 if (err != 0) {
247 dev_err(&client->dev, "Unable to write control register\n");
248 return -EIO;
249 }
250
251 return 0;
252}
253
254static int rx8581_rtc_read_time(struct device *dev, struct rtc_time *tm)
255{
256 return rx8581_get_datetime(to_i2c_client(dev), tm);
257}
258
259static int rx8581_rtc_set_time(struct device *dev, struct rtc_time *tm)
260{
261 return rx8581_set_datetime(to_i2c_client(dev), tm);
262}
263
264static const struct rtc_class_ops rx8581_rtc_ops = {
265 .read_time = rx8581_rtc_read_time,
266 .set_time = rx8581_rtc_set_time,
267};
268
269static int rx8581_probe(struct i2c_client *client,
270 const struct i2c_device_id *id)
271{
272 struct rx8581 *rx8581;
273
274 dev_dbg(&client->dev, "%s\n", __func__);
275
276 if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)
277 && !i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
278 return -EIO;
279
280 rx8581 = devm_kzalloc(&client->dev, sizeof(struct rx8581), GFP_KERNEL);
281 if (!rx8581)
282 return -ENOMEM;
283
284 i2c_set_clientdata(client, rx8581);
285 rx8581->client = client;
286
287 if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) {
288 rx8581->read_block_data = i2c_smbus_read_i2c_block_data;
289 rx8581->write_block_data = i2c_smbus_write_i2c_block_data;
290 } else {
291 rx8581->read_block_data = rx8581_read_block_data;
292 rx8581->write_block_data = rx8581_write_block_data;
293 }
294
295 dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");
296
297 rx8581->rtc = devm_rtc_device_register(&client->dev,
298 rx8581_driver.driver.name, &rx8581_rtc_ops, THIS_MODULE);
299
300 if (IS_ERR(rx8581->rtc)) {
301 dev_err(&client->dev,
302 "unable to register the class device\n");
303 return PTR_ERR(rx8581->rtc);
304 }
305
306 return 0;
307}
308
309static const struct i2c_device_id rx8581_id[] = {
310 { "rx8581", 0 },
311 { }
312};
313MODULE_DEVICE_TABLE(i2c, rx8581_id);
314
315static struct i2c_driver rx8581_driver = {
316 .driver = {
317 .name = "rtc-rx8581",
318 },
319 .probe = rx8581_probe,
320 .id_table = rx8581_id,
321};
322
323module_i2c_driver(rx8581_driver);
324
325MODULE_AUTHOR("Martyn Welch <martyn.welch@ge.com>");
326MODULE_DESCRIPTION("Epson RX-8581 RTC driver");
327MODULE_LICENSE("GPL");
328MODULE_VERSION(DRV_VERSION);
1/*
2 * An I2C driver for the Epson RX8581 RTC
3 *
4 * Author: Martyn Welch <martyn.welch@ge.com>
5 * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 *
11 * Based on: rtc-pcf8563.c (An I2C driver for the Philips PCF8563 RTC)
12 * Copyright 2005-06 Tower Technologies
13 */
14
15#include <linux/module.h>
16#include <linux/i2c.h>
17#include <linux/bcd.h>
18#include <linux/rtc.h>
19#include <linux/log2.h>
20
21#define RX8581_REG_SC 0x00 /* Second in BCD */
22#define RX8581_REG_MN 0x01 /* Minute in BCD */
23#define RX8581_REG_HR 0x02 /* Hour in BCD */
24#define RX8581_REG_DW 0x03 /* Day of Week */
25#define RX8581_REG_DM 0x04 /* Day of Month in BCD */
26#define RX8581_REG_MO 0x05 /* Month in BCD */
27#define RX8581_REG_YR 0x06 /* Year in BCD */
28#define RX8581_REG_RAM 0x07 /* RAM */
29#define RX8581_REG_AMN 0x08 /* Alarm Min in BCD*/
30#define RX8581_REG_AHR 0x09 /* Alarm Hour in BCD */
31#define RX8581_REG_ADM 0x0A
32#define RX8581_REG_ADW 0x0A
33#define RX8581_REG_TMR0 0x0B
34#define RX8581_REG_TMR1 0x0C
35#define RX8581_REG_EXT 0x0D /* Extension Register */
36#define RX8581_REG_FLAG 0x0E /* Flag Register */
37#define RX8581_REG_CTRL 0x0F /* Control Register */
38
39
40/* Flag Register bit definitions */
41#define RX8581_FLAG_UF 0x20 /* Update */
42#define RX8581_FLAG_TF 0x10 /* Timer */
43#define RX8581_FLAG_AF 0x08 /* Alarm */
44#define RX8581_FLAG_VLF 0x02 /* Voltage Low */
45
46/* Control Register bit definitions */
47#define RX8581_CTRL_UIE 0x20 /* Update Interrupt Enable */
48#define RX8581_CTRL_TIE 0x10 /* Timer Interrupt Enable */
49#define RX8581_CTRL_AIE 0x08 /* Alarm Interrupt Enable */
50#define RX8581_CTRL_STOP 0x02 /* STOP bit */
51#define RX8581_CTRL_RESET 0x01 /* RESET bit */
52
53struct rx8581 {
54 struct i2c_client *client;
55 struct rtc_device *rtc;
56 s32 (*read_block_data)(const struct i2c_client *client, u8 command,
57 u8 length, u8 *values);
58 s32 (*write_block_data)(const struct i2c_client *client, u8 command,
59 u8 length, const u8 *values);
60};
61
62static struct i2c_driver rx8581_driver;
63
64static int rx8581_read_block_data(const struct i2c_client *client, u8 command,
65 u8 length, u8 *values)
66{
67 s32 i, data;
68
69 for (i = 0; i < length; i++) {
70 data = i2c_smbus_read_byte_data(client, command + i);
71 if (data < 0)
72 return data;
73 values[i] = data;
74 }
75 return i;
76}
77
78static int rx8581_write_block_data(const struct i2c_client *client, u8 command,
79 u8 length, const u8 *values)
80{
81 s32 i, ret;
82
83 for (i = 0; i < length; i++) {
84 ret = i2c_smbus_write_byte_data(client, command + i,
85 values[i]);
86 if (ret < 0)
87 return ret;
88 }
89 return length;
90}
91
92/*
93 * In the routines that deal directly with the rx8581 hardware, we use
94 * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch.
95 */
96static int rx8581_get_datetime(struct i2c_client *client, struct rtc_time *tm)
97{
98 unsigned char date[7];
99 int data, err;
100 struct rx8581 *rx8581 = i2c_get_clientdata(client);
101
102 /* First we ensure that the "update flag" is not set, we read the
103 * time and date then re-read the "update flag". If the update flag
104 * has been set, we know that the time has changed during the read so
105 * we repeat the whole process again.
106 */
107 data = i2c_smbus_read_byte_data(client, RX8581_REG_FLAG);
108 if (data < 0) {
109 dev_err(&client->dev, "Unable to read device flags\n");
110 return -EIO;
111 }
112
113 do {
114 /* If update flag set, clear it */
115 if (data & RX8581_FLAG_UF) {
116 err = i2c_smbus_write_byte_data(client,
117 RX8581_REG_FLAG, (data & ~RX8581_FLAG_UF));
118 if (err != 0) {
119 dev_err(&client->dev, "Unable to write device flags\n");
120 return -EIO;
121 }
122 }
123
124 /* Now read time and date */
125 err = rx8581->read_block_data(client, RX8581_REG_SC,
126 7, date);
127 if (err < 0) {
128 dev_err(&client->dev, "Unable to read date\n");
129 return -EIO;
130 }
131
132 /* Check flag register */
133 data = i2c_smbus_read_byte_data(client, RX8581_REG_FLAG);
134 if (data < 0) {
135 dev_err(&client->dev, "Unable to read device flags\n");
136 return -EIO;
137 }
138 } while (data & RX8581_FLAG_UF);
139
140 if (data & RX8581_FLAG_VLF)
141 dev_info(&client->dev,
142 "low voltage detected, date/time is not reliable.\n");
143
144 dev_dbg(&client->dev,
145 "%s: raw data is sec=%02x, min=%02x, hr=%02x, "
146 "wday=%02x, mday=%02x, mon=%02x, year=%02x\n",
147 __func__,
148 date[0], date[1], date[2], date[3], date[4], date[5], date[6]);
149
150 tm->tm_sec = bcd2bin(date[RX8581_REG_SC] & 0x7F);
151 tm->tm_min = bcd2bin(date[RX8581_REG_MN] & 0x7F);
152 tm->tm_hour = bcd2bin(date[RX8581_REG_HR] & 0x3F); /* rtc hr 0-23 */
153 tm->tm_wday = ilog2(date[RX8581_REG_DW] & 0x7F);
154 tm->tm_mday = bcd2bin(date[RX8581_REG_DM] & 0x3F);
155 tm->tm_mon = bcd2bin(date[RX8581_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */
156 tm->tm_year = bcd2bin(date[RX8581_REG_YR]);
157 if (tm->tm_year < 70)
158 tm->tm_year += 100; /* assume we are in 1970...2069 */
159
160
161 dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
162 "mday=%d, mon=%d, year=%d, wday=%d\n",
163 __func__,
164 tm->tm_sec, tm->tm_min, tm->tm_hour,
165 tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
166
167 err = rtc_valid_tm(tm);
168 if (err < 0)
169 dev_err(&client->dev, "retrieved date/time is not valid.\n");
170
171 return err;
172}
173
174static int rx8581_set_datetime(struct i2c_client *client, struct rtc_time *tm)
175{
176 int data, err;
177 unsigned char buf[7];
178 struct rx8581 *rx8581 = i2c_get_clientdata(client);
179
180 dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, "
181 "mday=%d, mon=%d, year=%d, wday=%d\n",
182 __func__,
183 tm->tm_sec, tm->tm_min, tm->tm_hour,
184 tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
185
186 /* hours, minutes and seconds */
187 buf[RX8581_REG_SC] = bin2bcd(tm->tm_sec);
188 buf[RX8581_REG_MN] = bin2bcd(tm->tm_min);
189 buf[RX8581_REG_HR] = bin2bcd(tm->tm_hour);
190
191 buf[RX8581_REG_DM] = bin2bcd(tm->tm_mday);
192
193 /* month, 1 - 12 */
194 buf[RX8581_REG_MO] = bin2bcd(tm->tm_mon + 1);
195
196 /* year and century */
197 buf[RX8581_REG_YR] = bin2bcd(tm->tm_year % 100);
198 buf[RX8581_REG_DW] = (0x1 << tm->tm_wday);
199
200 /* Stop the clock */
201 data = i2c_smbus_read_byte_data(client, RX8581_REG_CTRL);
202 if (data < 0) {
203 dev_err(&client->dev, "Unable to read control register\n");
204 return -EIO;
205 }
206
207 err = i2c_smbus_write_byte_data(client, RX8581_REG_CTRL,
208 (data | RX8581_CTRL_STOP));
209 if (err < 0) {
210 dev_err(&client->dev, "Unable to write control register\n");
211 return -EIO;
212 }
213
214 /* write register's data */
215 err = rx8581->write_block_data(client, RX8581_REG_SC, 7, buf);
216 if (err < 0) {
217 dev_err(&client->dev, "Unable to write to date registers\n");
218 return -EIO;
219 }
220
221 /* get VLF and clear it */
222 data = i2c_smbus_read_byte_data(client, RX8581_REG_FLAG);
223 if (data < 0) {
224 dev_err(&client->dev, "Unable to read flag register\n");
225 return -EIO;
226 }
227
228 err = i2c_smbus_write_byte_data(client, RX8581_REG_FLAG,
229 (data & ~(RX8581_FLAG_VLF)));
230 if (err != 0) {
231 dev_err(&client->dev, "Unable to write flag register\n");
232 return -EIO;
233 }
234
235 /* Restart the clock */
236 data = i2c_smbus_read_byte_data(client, RX8581_REG_CTRL);
237 if (data < 0) {
238 dev_err(&client->dev, "Unable to read control register\n");
239 return -EIO;
240 }
241
242 err = i2c_smbus_write_byte_data(client, RX8581_REG_CTRL,
243 (data & ~(RX8581_CTRL_STOP)));
244 if (err != 0) {
245 dev_err(&client->dev, "Unable to write control register\n");
246 return -EIO;
247 }
248
249 return 0;
250}
251
252static int rx8581_rtc_read_time(struct device *dev, struct rtc_time *tm)
253{
254 return rx8581_get_datetime(to_i2c_client(dev), tm);
255}
256
257static int rx8581_rtc_set_time(struct device *dev, struct rtc_time *tm)
258{
259 return rx8581_set_datetime(to_i2c_client(dev), tm);
260}
261
262static const struct rtc_class_ops rx8581_rtc_ops = {
263 .read_time = rx8581_rtc_read_time,
264 .set_time = rx8581_rtc_set_time,
265};
266
267static int rx8581_probe(struct i2c_client *client,
268 const struct i2c_device_id *id)
269{
270 struct rx8581 *rx8581;
271
272 dev_dbg(&client->dev, "%s\n", __func__);
273
274 if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)
275 && !i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
276 return -EIO;
277
278 rx8581 = devm_kzalloc(&client->dev, sizeof(struct rx8581), GFP_KERNEL);
279 if (!rx8581)
280 return -ENOMEM;
281
282 i2c_set_clientdata(client, rx8581);
283 rx8581->client = client;
284
285 if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) {
286 rx8581->read_block_data = i2c_smbus_read_i2c_block_data;
287 rx8581->write_block_data = i2c_smbus_write_i2c_block_data;
288 } else {
289 rx8581->read_block_data = rx8581_read_block_data;
290 rx8581->write_block_data = rx8581_write_block_data;
291 }
292
293 rx8581->rtc = devm_rtc_device_register(&client->dev,
294 rx8581_driver.driver.name, &rx8581_rtc_ops, THIS_MODULE);
295
296 if (IS_ERR(rx8581->rtc)) {
297 dev_err(&client->dev,
298 "unable to register the class device\n");
299 return PTR_ERR(rx8581->rtc);
300 }
301
302 return 0;
303}
304
305static const struct i2c_device_id rx8581_id[] = {
306 { "rx8581", 0 },
307 { }
308};
309MODULE_DEVICE_TABLE(i2c, rx8581_id);
310
311static struct i2c_driver rx8581_driver = {
312 .driver = {
313 .name = "rtc-rx8581",
314 },
315 .probe = rx8581_probe,
316 .id_table = rx8581_id,
317};
318
319module_i2c_driver(rx8581_driver);
320
321MODULE_AUTHOR("Martyn Welch <martyn.welch@ge.com>");
322MODULE_DESCRIPTION("Epson RX-8581 RTC driver");
323MODULE_LICENSE("GPL");