Loading...
1/*
2 * rtc-ds1307.c - RTC driver for some mostly-compatible I2C chips.
3 *
4 * Copyright (C) 2005 James Chapman (ds1337 core)
5 * Copyright (C) 2006 David Brownell
6 * Copyright (C) 2009 Matthias Fuchs (rx8025 support)
7 * Copyright (C) 2012 Bertrand Achard (nvram access fixes)
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12 */
13
14#include <linux/bcd.h>
15#include <linux/i2c.h>
16#include <linux/init.h>
17#include <linux/module.h>
18#include <linux/rtc/ds1307.h>
19#include <linux/rtc.h>
20#include <linux/slab.h>
21#include <linux/string.h>
22#include <linux/hwmon.h>
23#include <linux/hwmon-sysfs.h>
24#include <linux/clk-provider.h>
25
26/*
27 * We can't determine type by probing, but if we expect pre-Linux code
28 * to have set the chip up as a clock (turning on the oscillator and
29 * setting the date and time), Linux can ignore the non-clock features.
30 * That's a natural job for a factory or repair bench.
31 */
32enum ds_type {
33 ds_1307,
34 ds_1337,
35 ds_1338,
36 ds_1339,
37 ds_1340,
38 ds_1388,
39 ds_3231,
40 m41t00,
41 mcp794xx,
42 rx_8025,
43 last_ds_type /* always last */
44 /* rs5c372 too? different address... */
45};
46
47
48/* RTC registers don't differ much, except for the century flag */
49#define DS1307_REG_SECS 0x00 /* 00-59 */
50# define DS1307_BIT_CH 0x80
51# define DS1340_BIT_nEOSC 0x80
52# define MCP794XX_BIT_ST 0x80
53#define DS1307_REG_MIN 0x01 /* 00-59 */
54#define DS1307_REG_HOUR 0x02 /* 00-23, or 1-12{am,pm} */
55# define DS1307_BIT_12HR 0x40 /* in REG_HOUR */
56# define DS1307_BIT_PM 0x20 /* in REG_HOUR */
57# define DS1340_BIT_CENTURY_EN 0x80 /* in REG_HOUR */
58# define DS1340_BIT_CENTURY 0x40 /* in REG_HOUR */
59#define DS1307_REG_WDAY 0x03 /* 01-07 */
60# define MCP794XX_BIT_VBATEN 0x08
61#define DS1307_REG_MDAY 0x04 /* 01-31 */
62#define DS1307_REG_MONTH 0x05 /* 01-12 */
63# define DS1337_BIT_CENTURY 0x80 /* in REG_MONTH */
64#define DS1307_REG_YEAR 0x06 /* 00-99 */
65
66/*
67 * Other registers (control, status, alarms, trickle charge, NVRAM, etc)
68 * start at 7, and they differ a LOT. Only control and status matter for
69 * basic RTC date and time functionality; be careful using them.
70 */
71#define DS1307_REG_CONTROL 0x07 /* or ds1338 */
72# define DS1307_BIT_OUT 0x80
73# define DS1338_BIT_OSF 0x20
74# define DS1307_BIT_SQWE 0x10
75# define DS1307_BIT_RS1 0x02
76# define DS1307_BIT_RS0 0x01
77#define DS1337_REG_CONTROL 0x0e
78# define DS1337_BIT_nEOSC 0x80
79# define DS1339_BIT_BBSQI 0x20
80# define DS3231_BIT_BBSQW 0x40 /* same as BBSQI */
81# define DS1337_BIT_RS2 0x10
82# define DS1337_BIT_RS1 0x08
83# define DS1337_BIT_INTCN 0x04
84# define DS1337_BIT_A2IE 0x02
85# define DS1337_BIT_A1IE 0x01
86#define DS1340_REG_CONTROL 0x07
87# define DS1340_BIT_OUT 0x80
88# define DS1340_BIT_FT 0x40
89# define DS1340_BIT_CALIB_SIGN 0x20
90# define DS1340_M_CALIBRATION 0x1f
91#define DS1340_REG_FLAG 0x09
92# define DS1340_BIT_OSF 0x80
93#define DS1337_REG_STATUS 0x0f
94# define DS1337_BIT_OSF 0x80
95# define DS3231_BIT_EN32KHZ 0x08
96# define DS1337_BIT_A2I 0x02
97# define DS1337_BIT_A1I 0x01
98#define DS1339_REG_ALARM1_SECS 0x07
99
100#define DS13XX_TRICKLE_CHARGER_MAGIC 0xa0
101
102#define RX8025_REG_CTRL1 0x0e
103# define RX8025_BIT_2412 0x20
104#define RX8025_REG_CTRL2 0x0f
105# define RX8025_BIT_PON 0x10
106# define RX8025_BIT_VDET 0x40
107# define RX8025_BIT_XST 0x20
108
109
110struct ds1307 {
111 u8 offset; /* register's offset */
112 u8 regs[11];
113 u16 nvram_offset;
114 struct bin_attribute *nvram;
115 enum ds_type type;
116 unsigned long flags;
117#define HAS_NVRAM 0 /* bit 0 == sysfs file active */
118#define HAS_ALARM 1 /* bit 1 == irq claimed */
119 struct i2c_client *client;
120 struct rtc_device *rtc;
121 s32 (*read_block_data)(const struct i2c_client *client, u8 command,
122 u8 length, u8 *values);
123 s32 (*write_block_data)(const struct i2c_client *client, u8 command,
124 u8 length, const u8 *values);
125#ifdef CONFIG_COMMON_CLK
126 struct clk_hw clks[2];
127#endif
128};
129
130struct chip_desc {
131 unsigned alarm:1;
132 u16 nvram_offset;
133 u16 nvram_size;
134 u16 trickle_charger_reg;
135 u8 trickle_charger_setup;
136 u8 (*do_trickle_setup)(struct i2c_client *, uint32_t, bool);
137};
138
139static u8 do_trickle_setup_ds1339(struct i2c_client *,
140 uint32_t ohms, bool diode);
141
142static struct chip_desc chips[last_ds_type] = {
143 [ds_1307] = {
144 .nvram_offset = 8,
145 .nvram_size = 56,
146 },
147 [ds_1337] = {
148 .alarm = 1,
149 },
150 [ds_1338] = {
151 .nvram_offset = 8,
152 .nvram_size = 56,
153 },
154 [ds_1339] = {
155 .alarm = 1,
156 .trickle_charger_reg = 0x10,
157 .do_trickle_setup = &do_trickle_setup_ds1339,
158 },
159 [ds_1340] = {
160 .trickle_charger_reg = 0x08,
161 },
162 [ds_1388] = {
163 .trickle_charger_reg = 0x0a,
164 },
165 [ds_3231] = {
166 .alarm = 1,
167 },
168 [mcp794xx] = {
169 .alarm = 1,
170 /* this is battery backed SRAM */
171 .nvram_offset = 0x20,
172 .nvram_size = 0x40,
173 },
174};
175
176static const struct i2c_device_id ds1307_id[] = {
177 { "ds1307", ds_1307 },
178 { "ds1337", ds_1337 },
179 { "ds1338", ds_1338 },
180 { "ds1339", ds_1339 },
181 { "ds1388", ds_1388 },
182 { "ds1340", ds_1340 },
183 { "ds3231", ds_3231 },
184 { "m41t00", m41t00 },
185 { "mcp7940x", mcp794xx },
186 { "mcp7941x", mcp794xx },
187 { "pt7c4338", ds_1307 },
188 { "rx8025", rx_8025 },
189 { }
190};
191MODULE_DEVICE_TABLE(i2c, ds1307_id);
192
193/*----------------------------------------------------------------------*/
194
195#define BLOCK_DATA_MAX_TRIES 10
196
197static s32 ds1307_read_block_data_once(const struct i2c_client *client,
198 u8 command, u8 length, u8 *values)
199{
200 s32 i, data;
201
202 for (i = 0; i < length; i++) {
203 data = i2c_smbus_read_byte_data(client, command + i);
204 if (data < 0)
205 return data;
206 values[i] = data;
207 }
208 return i;
209}
210
211static s32 ds1307_read_block_data(const struct i2c_client *client, u8 command,
212 u8 length, u8 *values)
213{
214 u8 oldvalues[255];
215 s32 ret;
216 int tries = 0;
217
218 dev_dbg(&client->dev, "ds1307_read_block_data (length=%d)\n", length);
219 ret = ds1307_read_block_data_once(client, command, length, values);
220 if (ret < 0)
221 return ret;
222 do {
223 if (++tries > BLOCK_DATA_MAX_TRIES) {
224 dev_err(&client->dev,
225 "ds1307_read_block_data failed\n");
226 return -EIO;
227 }
228 memcpy(oldvalues, values, length);
229 ret = ds1307_read_block_data_once(client, command, length,
230 values);
231 if (ret < 0)
232 return ret;
233 } while (memcmp(oldvalues, values, length));
234 return length;
235}
236
237static s32 ds1307_write_block_data(const struct i2c_client *client, u8 command,
238 u8 length, const u8 *values)
239{
240 u8 currvalues[255];
241 int tries = 0;
242
243 dev_dbg(&client->dev, "ds1307_write_block_data (length=%d)\n", length);
244 do {
245 s32 i, ret;
246
247 if (++tries > BLOCK_DATA_MAX_TRIES) {
248 dev_err(&client->dev,
249 "ds1307_write_block_data failed\n");
250 return -EIO;
251 }
252 for (i = 0; i < length; i++) {
253 ret = i2c_smbus_write_byte_data(client, command + i,
254 values[i]);
255 if (ret < 0)
256 return ret;
257 }
258 ret = ds1307_read_block_data_once(client, command, length,
259 currvalues);
260 if (ret < 0)
261 return ret;
262 } while (memcmp(currvalues, values, length));
263 return length;
264}
265
266/*----------------------------------------------------------------------*/
267
268/* These RTC devices are not designed to be connected to a SMbus adapter.
269 SMbus limits block operations length to 32 bytes, whereas it's not
270 limited on I2C buses. As a result, accesses may exceed 32 bytes;
271 in that case, split them into smaller blocks */
272
273static s32 ds1307_native_smbus_write_block_data(const struct i2c_client *client,
274 u8 command, u8 length, const u8 *values)
275{
276 u8 suboffset = 0;
277
278 if (length <= I2C_SMBUS_BLOCK_MAX)
279 return i2c_smbus_write_i2c_block_data(client,
280 command, length, values);
281
282 while (suboffset < length) {
283 s32 retval = i2c_smbus_write_i2c_block_data(client,
284 command + suboffset,
285 min(I2C_SMBUS_BLOCK_MAX, length - suboffset),
286 values + suboffset);
287 if (retval < 0)
288 return retval;
289
290 suboffset += I2C_SMBUS_BLOCK_MAX;
291 }
292 return length;
293}
294
295static s32 ds1307_native_smbus_read_block_data(const struct i2c_client *client,
296 u8 command, u8 length, u8 *values)
297{
298 u8 suboffset = 0;
299
300 if (length <= I2C_SMBUS_BLOCK_MAX)
301 return i2c_smbus_read_i2c_block_data(client,
302 command, length, values);
303
304 while (suboffset < length) {
305 s32 retval = i2c_smbus_read_i2c_block_data(client,
306 command + suboffset,
307 min(I2C_SMBUS_BLOCK_MAX, length - suboffset),
308 values + suboffset);
309 if (retval < 0)
310 return retval;
311
312 suboffset += I2C_SMBUS_BLOCK_MAX;
313 }
314 return length;
315}
316
317/*----------------------------------------------------------------------*/
318
319/*
320 * The ds1337 and ds1339 both have two alarms, but we only use the first
321 * one (with a "seconds" field). For ds1337 we expect nINTA is our alarm
322 * signal; ds1339 chips have only one alarm signal.
323 */
324static irqreturn_t ds1307_irq(int irq, void *dev_id)
325{
326 struct i2c_client *client = dev_id;
327 struct ds1307 *ds1307 = i2c_get_clientdata(client);
328 struct mutex *lock = &ds1307->rtc->ops_lock;
329 int stat, control;
330
331 mutex_lock(lock);
332 stat = i2c_smbus_read_byte_data(client, DS1337_REG_STATUS);
333 if (stat < 0)
334 goto out;
335
336 if (stat & DS1337_BIT_A1I) {
337 stat &= ~DS1337_BIT_A1I;
338 i2c_smbus_write_byte_data(client, DS1337_REG_STATUS, stat);
339
340 control = i2c_smbus_read_byte_data(client, DS1337_REG_CONTROL);
341 if (control < 0)
342 goto out;
343
344 control &= ~DS1337_BIT_A1IE;
345 i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL, control);
346
347 rtc_update_irq(ds1307->rtc, 1, RTC_AF | RTC_IRQF);
348 }
349
350out:
351 mutex_unlock(lock);
352
353 return IRQ_HANDLED;
354}
355
356/*----------------------------------------------------------------------*/
357
358static int ds1307_get_time(struct device *dev, struct rtc_time *t)
359{
360 struct ds1307 *ds1307 = dev_get_drvdata(dev);
361 int tmp;
362
363 /* read the RTC date and time registers all at once */
364 tmp = ds1307->read_block_data(ds1307->client,
365 ds1307->offset, 7, ds1307->regs);
366 if (tmp != 7) {
367 dev_err(dev, "%s error %d\n", "read", tmp);
368 return -EIO;
369 }
370
371 dev_dbg(dev, "%s: %7ph\n", "read", ds1307->regs);
372
373 t->tm_sec = bcd2bin(ds1307->regs[DS1307_REG_SECS] & 0x7f);
374 t->tm_min = bcd2bin(ds1307->regs[DS1307_REG_MIN] & 0x7f);
375 tmp = ds1307->regs[DS1307_REG_HOUR] & 0x3f;
376 t->tm_hour = bcd2bin(tmp);
377 t->tm_wday = bcd2bin(ds1307->regs[DS1307_REG_WDAY] & 0x07) - 1;
378 t->tm_mday = bcd2bin(ds1307->regs[DS1307_REG_MDAY] & 0x3f);
379 tmp = ds1307->regs[DS1307_REG_MONTH] & 0x1f;
380 t->tm_mon = bcd2bin(tmp) - 1;
381
382 /* assume 20YY not 19YY, and ignore DS1337_BIT_CENTURY */
383 t->tm_year = bcd2bin(ds1307->regs[DS1307_REG_YEAR]) + 100;
384
385 dev_dbg(dev, "%s secs=%d, mins=%d, "
386 "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
387 "read", t->tm_sec, t->tm_min,
388 t->tm_hour, t->tm_mday,
389 t->tm_mon, t->tm_year, t->tm_wday);
390
391 /* initial clock setting can be undefined */
392 return rtc_valid_tm(t);
393}
394
395static int ds1307_set_time(struct device *dev, struct rtc_time *t)
396{
397 struct ds1307 *ds1307 = dev_get_drvdata(dev);
398 int result;
399 int tmp;
400 u8 *buf = ds1307->regs;
401
402 dev_dbg(dev, "%s secs=%d, mins=%d, "
403 "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
404 "write", t->tm_sec, t->tm_min,
405 t->tm_hour, t->tm_mday,
406 t->tm_mon, t->tm_year, t->tm_wday);
407
408 buf[DS1307_REG_SECS] = bin2bcd(t->tm_sec);
409 buf[DS1307_REG_MIN] = bin2bcd(t->tm_min);
410 buf[DS1307_REG_HOUR] = bin2bcd(t->tm_hour);
411 buf[DS1307_REG_WDAY] = bin2bcd(t->tm_wday + 1);
412 buf[DS1307_REG_MDAY] = bin2bcd(t->tm_mday);
413 buf[DS1307_REG_MONTH] = bin2bcd(t->tm_mon + 1);
414
415 /* assume 20YY not 19YY */
416 tmp = t->tm_year - 100;
417 buf[DS1307_REG_YEAR] = bin2bcd(tmp);
418
419 switch (ds1307->type) {
420 case ds_1337:
421 case ds_1339:
422 case ds_3231:
423 buf[DS1307_REG_MONTH] |= DS1337_BIT_CENTURY;
424 break;
425 case ds_1340:
426 buf[DS1307_REG_HOUR] |= DS1340_BIT_CENTURY_EN
427 | DS1340_BIT_CENTURY;
428 break;
429 case mcp794xx:
430 /*
431 * these bits were cleared when preparing the date/time
432 * values and need to be set again before writing the
433 * buffer out to the device.
434 */
435 buf[DS1307_REG_SECS] |= MCP794XX_BIT_ST;
436 buf[DS1307_REG_WDAY] |= MCP794XX_BIT_VBATEN;
437 break;
438 default:
439 break;
440 }
441
442 dev_dbg(dev, "%s: %7ph\n", "write", buf);
443
444 result = ds1307->write_block_data(ds1307->client,
445 ds1307->offset, 7, buf);
446 if (result < 0) {
447 dev_err(dev, "%s error %d\n", "write", result);
448 return result;
449 }
450 return 0;
451}
452
453static int ds1337_read_alarm(struct device *dev, struct rtc_wkalrm *t)
454{
455 struct i2c_client *client = to_i2c_client(dev);
456 struct ds1307 *ds1307 = i2c_get_clientdata(client);
457 int ret;
458
459 if (!test_bit(HAS_ALARM, &ds1307->flags))
460 return -EINVAL;
461
462 /* read all ALARM1, ALARM2, and status registers at once */
463 ret = ds1307->read_block_data(client,
464 DS1339_REG_ALARM1_SECS, 9, ds1307->regs);
465 if (ret != 9) {
466 dev_err(dev, "%s error %d\n", "alarm read", ret);
467 return -EIO;
468 }
469
470 dev_dbg(dev, "%s: %4ph, %3ph, %2ph\n", "alarm read",
471 &ds1307->regs[0], &ds1307->regs[4], &ds1307->regs[7]);
472
473 /*
474 * report alarm time (ALARM1); assume 24 hour and day-of-month modes,
475 * and that all four fields are checked matches
476 */
477 t->time.tm_sec = bcd2bin(ds1307->regs[0] & 0x7f);
478 t->time.tm_min = bcd2bin(ds1307->regs[1] & 0x7f);
479 t->time.tm_hour = bcd2bin(ds1307->regs[2] & 0x3f);
480 t->time.tm_mday = bcd2bin(ds1307->regs[3] & 0x3f);
481 t->time.tm_mon = -1;
482 t->time.tm_year = -1;
483 t->time.tm_wday = -1;
484 t->time.tm_yday = -1;
485 t->time.tm_isdst = -1;
486
487 /* ... and status */
488 t->enabled = !!(ds1307->regs[7] & DS1337_BIT_A1IE);
489 t->pending = !!(ds1307->regs[8] & DS1337_BIT_A1I);
490
491 dev_dbg(dev, "%s secs=%d, mins=%d, "
492 "hours=%d, mday=%d, enabled=%d, pending=%d\n",
493 "alarm read", t->time.tm_sec, t->time.tm_min,
494 t->time.tm_hour, t->time.tm_mday,
495 t->enabled, t->pending);
496
497 return 0;
498}
499
500static int ds1337_set_alarm(struct device *dev, struct rtc_wkalrm *t)
501{
502 struct i2c_client *client = to_i2c_client(dev);
503 struct ds1307 *ds1307 = i2c_get_clientdata(client);
504 unsigned char *buf = ds1307->regs;
505 u8 control, status;
506 int ret;
507
508 if (!test_bit(HAS_ALARM, &ds1307->flags))
509 return -EINVAL;
510
511 dev_dbg(dev, "%s secs=%d, mins=%d, "
512 "hours=%d, mday=%d, enabled=%d, pending=%d\n",
513 "alarm set", t->time.tm_sec, t->time.tm_min,
514 t->time.tm_hour, t->time.tm_mday,
515 t->enabled, t->pending);
516
517 /* read current status of both alarms and the chip */
518 ret = ds1307->read_block_data(client,
519 DS1339_REG_ALARM1_SECS, 9, buf);
520 if (ret != 9) {
521 dev_err(dev, "%s error %d\n", "alarm write", ret);
522 return -EIO;
523 }
524 control = ds1307->regs[7];
525 status = ds1307->regs[8];
526
527 dev_dbg(dev, "%s: %4ph, %3ph, %02x %02x\n", "alarm set (old status)",
528 &ds1307->regs[0], &ds1307->regs[4], control, status);
529
530 /* set ALARM1, using 24 hour and day-of-month modes */
531 buf[0] = bin2bcd(t->time.tm_sec);
532 buf[1] = bin2bcd(t->time.tm_min);
533 buf[2] = bin2bcd(t->time.tm_hour);
534 buf[3] = bin2bcd(t->time.tm_mday);
535
536 /* set ALARM2 to non-garbage */
537 buf[4] = 0;
538 buf[5] = 0;
539 buf[6] = 0;
540
541 /* optionally enable ALARM1 */
542 buf[7] = control & ~(DS1337_BIT_A1IE | DS1337_BIT_A2IE);
543 if (t->enabled) {
544 dev_dbg(dev, "alarm IRQ armed\n");
545 buf[7] |= DS1337_BIT_A1IE; /* only ALARM1 is used */
546 }
547 buf[8] = status & ~(DS1337_BIT_A1I | DS1337_BIT_A2I);
548
549 ret = ds1307->write_block_data(client,
550 DS1339_REG_ALARM1_SECS, 9, buf);
551 if (ret < 0) {
552 dev_err(dev, "can't set alarm time\n");
553 return ret;
554 }
555
556 return 0;
557}
558
559static int ds1307_alarm_irq_enable(struct device *dev, unsigned int enabled)
560{
561 struct i2c_client *client = to_i2c_client(dev);
562 struct ds1307 *ds1307 = i2c_get_clientdata(client);
563 int ret;
564
565 if (!test_bit(HAS_ALARM, &ds1307->flags))
566 return -ENOTTY;
567
568 ret = i2c_smbus_read_byte_data(client, DS1337_REG_CONTROL);
569 if (ret < 0)
570 return ret;
571
572 if (enabled)
573 ret |= DS1337_BIT_A1IE;
574 else
575 ret &= ~DS1337_BIT_A1IE;
576
577 ret = i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL, ret);
578 if (ret < 0)
579 return ret;
580
581 return 0;
582}
583
584static const struct rtc_class_ops ds13xx_rtc_ops = {
585 .read_time = ds1307_get_time,
586 .set_time = ds1307_set_time,
587 .read_alarm = ds1337_read_alarm,
588 .set_alarm = ds1337_set_alarm,
589 .alarm_irq_enable = ds1307_alarm_irq_enable,
590};
591
592/*----------------------------------------------------------------------*/
593
594/*
595 * Alarm support for mcp794xx devices.
596 */
597
598#define MCP794XX_REG_CONTROL 0x07
599# define MCP794XX_BIT_ALM0_EN 0x10
600# define MCP794XX_BIT_ALM1_EN 0x20
601#define MCP794XX_REG_ALARM0_BASE 0x0a
602#define MCP794XX_REG_ALARM0_CTRL 0x0d
603#define MCP794XX_REG_ALARM1_BASE 0x11
604#define MCP794XX_REG_ALARM1_CTRL 0x14
605# define MCP794XX_BIT_ALMX_IF (1 << 3)
606# define MCP794XX_BIT_ALMX_C0 (1 << 4)
607# define MCP794XX_BIT_ALMX_C1 (1 << 5)
608# define MCP794XX_BIT_ALMX_C2 (1 << 6)
609# define MCP794XX_BIT_ALMX_POL (1 << 7)
610# define MCP794XX_MSK_ALMX_MATCH (MCP794XX_BIT_ALMX_C0 | \
611 MCP794XX_BIT_ALMX_C1 | \
612 MCP794XX_BIT_ALMX_C2)
613
614static irqreturn_t mcp794xx_irq(int irq, void *dev_id)
615{
616 struct i2c_client *client = dev_id;
617 struct ds1307 *ds1307 = i2c_get_clientdata(client);
618 struct mutex *lock = &ds1307->rtc->ops_lock;
619 int reg, ret;
620
621 mutex_lock(lock);
622
623 /* Check and clear alarm 0 interrupt flag. */
624 reg = i2c_smbus_read_byte_data(client, MCP794XX_REG_ALARM0_CTRL);
625 if (reg < 0)
626 goto out;
627 if (!(reg & MCP794XX_BIT_ALMX_IF))
628 goto out;
629 reg &= ~MCP794XX_BIT_ALMX_IF;
630 ret = i2c_smbus_write_byte_data(client, MCP794XX_REG_ALARM0_CTRL, reg);
631 if (ret < 0)
632 goto out;
633
634 /* Disable alarm 0. */
635 reg = i2c_smbus_read_byte_data(client, MCP794XX_REG_CONTROL);
636 if (reg < 0)
637 goto out;
638 reg &= ~MCP794XX_BIT_ALM0_EN;
639 ret = i2c_smbus_write_byte_data(client, MCP794XX_REG_CONTROL, reg);
640 if (ret < 0)
641 goto out;
642
643 rtc_update_irq(ds1307->rtc, 1, RTC_AF | RTC_IRQF);
644
645out:
646 mutex_unlock(lock);
647
648 return IRQ_HANDLED;
649}
650
651static int mcp794xx_read_alarm(struct device *dev, struct rtc_wkalrm *t)
652{
653 struct i2c_client *client = to_i2c_client(dev);
654 struct ds1307 *ds1307 = i2c_get_clientdata(client);
655 u8 *regs = ds1307->regs;
656 int ret;
657
658 if (!test_bit(HAS_ALARM, &ds1307->flags))
659 return -EINVAL;
660
661 /* Read control and alarm 0 registers. */
662 ret = ds1307->read_block_data(client, MCP794XX_REG_CONTROL, 10, regs);
663 if (ret < 0)
664 return ret;
665
666 t->enabled = !!(regs[0] & MCP794XX_BIT_ALM0_EN);
667
668 /* Report alarm 0 time assuming 24-hour and day-of-month modes. */
669 t->time.tm_sec = bcd2bin(ds1307->regs[3] & 0x7f);
670 t->time.tm_min = bcd2bin(ds1307->regs[4] & 0x7f);
671 t->time.tm_hour = bcd2bin(ds1307->regs[5] & 0x3f);
672 t->time.tm_wday = bcd2bin(ds1307->regs[6] & 0x7) - 1;
673 t->time.tm_mday = bcd2bin(ds1307->regs[7] & 0x3f);
674 t->time.tm_mon = bcd2bin(ds1307->regs[8] & 0x1f) - 1;
675 t->time.tm_year = -1;
676 t->time.tm_yday = -1;
677 t->time.tm_isdst = -1;
678
679 dev_dbg(dev, "%s, sec=%d min=%d hour=%d wday=%d mday=%d mon=%d "
680 "enabled=%d polarity=%d irq=%d match=%d\n", __func__,
681 t->time.tm_sec, t->time.tm_min, t->time.tm_hour,
682 t->time.tm_wday, t->time.tm_mday, t->time.tm_mon, t->enabled,
683 !!(ds1307->regs[6] & MCP794XX_BIT_ALMX_POL),
684 !!(ds1307->regs[6] & MCP794XX_BIT_ALMX_IF),
685 (ds1307->regs[6] & MCP794XX_MSK_ALMX_MATCH) >> 4);
686
687 return 0;
688}
689
690static int mcp794xx_set_alarm(struct device *dev, struct rtc_wkalrm *t)
691{
692 struct i2c_client *client = to_i2c_client(dev);
693 struct ds1307 *ds1307 = i2c_get_clientdata(client);
694 unsigned char *regs = ds1307->regs;
695 int ret;
696
697 if (!test_bit(HAS_ALARM, &ds1307->flags))
698 return -EINVAL;
699
700 dev_dbg(dev, "%s, sec=%d min=%d hour=%d wday=%d mday=%d mon=%d "
701 "enabled=%d pending=%d\n", __func__,
702 t->time.tm_sec, t->time.tm_min, t->time.tm_hour,
703 t->time.tm_wday, t->time.tm_mday, t->time.tm_mon,
704 t->enabled, t->pending);
705
706 /* Read control and alarm 0 registers. */
707 ret = ds1307->read_block_data(client, MCP794XX_REG_CONTROL, 10, regs);
708 if (ret < 0)
709 return ret;
710
711 /* Set alarm 0, using 24-hour and day-of-month modes. */
712 regs[3] = bin2bcd(t->time.tm_sec);
713 regs[4] = bin2bcd(t->time.tm_min);
714 regs[5] = bin2bcd(t->time.tm_hour);
715 regs[6] = bin2bcd(t->time.tm_wday + 1);
716 regs[7] = bin2bcd(t->time.tm_mday);
717 regs[8] = bin2bcd(t->time.tm_mon + 1);
718
719 /* Clear the alarm 0 interrupt flag. */
720 regs[6] &= ~MCP794XX_BIT_ALMX_IF;
721 /* Set alarm match: second, minute, hour, day, date, month. */
722 regs[6] |= MCP794XX_MSK_ALMX_MATCH;
723 /* Disable interrupt. We will not enable until completely programmed */
724 regs[0] &= ~MCP794XX_BIT_ALM0_EN;
725
726 ret = ds1307->write_block_data(client, MCP794XX_REG_CONTROL, 10, regs);
727 if (ret < 0)
728 return ret;
729
730 if (!t->enabled)
731 return 0;
732 regs[0] |= MCP794XX_BIT_ALM0_EN;
733 return i2c_smbus_write_byte_data(client, MCP794XX_REG_CONTROL, regs[0]);
734}
735
736static int mcp794xx_alarm_irq_enable(struct device *dev, unsigned int enabled)
737{
738 struct i2c_client *client = to_i2c_client(dev);
739 struct ds1307 *ds1307 = i2c_get_clientdata(client);
740 int reg;
741
742 if (!test_bit(HAS_ALARM, &ds1307->flags))
743 return -EINVAL;
744
745 reg = i2c_smbus_read_byte_data(client, MCP794XX_REG_CONTROL);
746 if (reg < 0)
747 return reg;
748
749 if (enabled)
750 reg |= MCP794XX_BIT_ALM0_EN;
751 else
752 reg &= ~MCP794XX_BIT_ALM0_EN;
753
754 return i2c_smbus_write_byte_data(client, MCP794XX_REG_CONTROL, reg);
755}
756
757static const struct rtc_class_ops mcp794xx_rtc_ops = {
758 .read_time = ds1307_get_time,
759 .set_time = ds1307_set_time,
760 .read_alarm = mcp794xx_read_alarm,
761 .set_alarm = mcp794xx_set_alarm,
762 .alarm_irq_enable = mcp794xx_alarm_irq_enable,
763};
764
765/*----------------------------------------------------------------------*/
766
767static ssize_t
768ds1307_nvram_read(struct file *filp, struct kobject *kobj,
769 struct bin_attribute *attr,
770 char *buf, loff_t off, size_t count)
771{
772 struct i2c_client *client;
773 struct ds1307 *ds1307;
774 int result;
775
776 client = kobj_to_i2c_client(kobj);
777 ds1307 = i2c_get_clientdata(client);
778
779 result = ds1307->read_block_data(client, ds1307->nvram_offset + off,
780 count, buf);
781 if (result < 0)
782 dev_err(&client->dev, "%s error %d\n", "nvram read", result);
783 return result;
784}
785
786static ssize_t
787ds1307_nvram_write(struct file *filp, struct kobject *kobj,
788 struct bin_attribute *attr,
789 char *buf, loff_t off, size_t count)
790{
791 struct i2c_client *client;
792 struct ds1307 *ds1307;
793 int result;
794
795 client = kobj_to_i2c_client(kobj);
796 ds1307 = i2c_get_clientdata(client);
797
798 result = ds1307->write_block_data(client, ds1307->nvram_offset + off,
799 count, buf);
800 if (result < 0) {
801 dev_err(&client->dev, "%s error %d\n", "nvram write", result);
802 return result;
803 }
804 return count;
805}
806
807
808/*----------------------------------------------------------------------*/
809
810static u8 do_trickle_setup_ds1339(struct i2c_client *client,
811 uint32_t ohms, bool diode)
812{
813 u8 setup = (diode) ? DS1307_TRICKLE_CHARGER_DIODE :
814 DS1307_TRICKLE_CHARGER_NO_DIODE;
815
816 switch (ohms) {
817 case 250:
818 setup |= DS1307_TRICKLE_CHARGER_250_OHM;
819 break;
820 case 2000:
821 setup |= DS1307_TRICKLE_CHARGER_2K_OHM;
822 break;
823 case 4000:
824 setup |= DS1307_TRICKLE_CHARGER_4K_OHM;
825 break;
826 default:
827 dev_warn(&client->dev,
828 "Unsupported ohm value %u in dt\n", ohms);
829 return 0;
830 }
831 return setup;
832}
833
834static void ds1307_trickle_of_init(struct i2c_client *client,
835 struct chip_desc *chip)
836{
837 uint32_t ohms = 0;
838 bool diode = true;
839
840 if (!chip->do_trickle_setup)
841 goto out;
842 if (of_property_read_u32(client->dev.of_node, "trickle-resistor-ohms" , &ohms))
843 goto out;
844 if (of_property_read_bool(client->dev.of_node, "trickle-diode-disable"))
845 diode = false;
846 chip->trickle_charger_setup = chip->do_trickle_setup(client,
847 ohms, diode);
848out:
849 return;
850}
851
852/*----------------------------------------------------------------------*/
853
854#ifdef CONFIG_RTC_DRV_DS1307_HWMON
855
856/*
857 * Temperature sensor support for ds3231 devices.
858 */
859
860#define DS3231_REG_TEMPERATURE 0x11
861
862/*
863 * A user-initiated temperature conversion is not started by this function,
864 * so the temperature is updated once every 64 seconds.
865 */
866static int ds3231_hwmon_read_temp(struct device *dev, s32 *mC)
867{
868 struct ds1307 *ds1307 = dev_get_drvdata(dev);
869 u8 temp_buf[2];
870 s16 temp;
871 int ret;
872
873 ret = ds1307->read_block_data(ds1307->client, DS3231_REG_TEMPERATURE,
874 sizeof(temp_buf), temp_buf);
875 if (ret < 0)
876 return ret;
877 if (ret != sizeof(temp_buf))
878 return -EIO;
879
880 /*
881 * Temperature is represented as a 10-bit code with a resolution of
882 * 0.25 degree celsius and encoded in two's complement format.
883 */
884 temp = (temp_buf[0] << 8) | temp_buf[1];
885 temp >>= 6;
886 *mC = temp * 250;
887
888 return 0;
889}
890
891static ssize_t ds3231_hwmon_show_temp(struct device *dev,
892 struct device_attribute *attr, char *buf)
893{
894 int ret;
895 s32 temp;
896
897 ret = ds3231_hwmon_read_temp(dev, &temp);
898 if (ret)
899 return ret;
900
901 return sprintf(buf, "%d\n", temp);
902}
903static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, ds3231_hwmon_show_temp,
904 NULL, 0);
905
906static struct attribute *ds3231_hwmon_attrs[] = {
907 &sensor_dev_attr_temp1_input.dev_attr.attr,
908 NULL,
909};
910ATTRIBUTE_GROUPS(ds3231_hwmon);
911
912static void ds1307_hwmon_register(struct ds1307 *ds1307)
913{
914 struct device *dev;
915
916 if (ds1307->type != ds_3231)
917 return;
918
919 dev = devm_hwmon_device_register_with_groups(&ds1307->client->dev,
920 ds1307->client->name,
921 ds1307, ds3231_hwmon_groups);
922 if (IS_ERR(dev)) {
923 dev_warn(&ds1307->client->dev,
924 "unable to register hwmon device %ld\n", PTR_ERR(dev));
925 }
926}
927
928#else
929
930static void ds1307_hwmon_register(struct ds1307 *ds1307)
931{
932}
933
934#endif /* CONFIG_RTC_DRV_DS1307_HWMON */
935
936/*----------------------------------------------------------------------*/
937
938/*
939 * Square-wave output support for DS3231
940 * Datasheet: https://datasheets.maximintegrated.com/en/ds/DS3231.pdf
941 */
942#ifdef CONFIG_COMMON_CLK
943
944enum {
945 DS3231_CLK_SQW = 0,
946 DS3231_CLK_32KHZ,
947};
948
949#define clk_sqw_to_ds1307(clk) \
950 container_of(clk, struct ds1307, clks[DS3231_CLK_SQW])
951#define clk_32khz_to_ds1307(clk) \
952 container_of(clk, struct ds1307, clks[DS3231_CLK_32KHZ])
953
954static int ds3231_clk_sqw_rates[] = {
955 1,
956 1024,
957 4096,
958 8192,
959};
960
961static int ds1337_write_control(struct ds1307 *ds1307, u8 mask, u8 value)
962{
963 struct i2c_client *client = ds1307->client;
964 struct mutex *lock = &ds1307->rtc->ops_lock;
965 int control;
966 int ret;
967
968 mutex_lock(lock);
969
970 control = i2c_smbus_read_byte_data(client, DS1337_REG_CONTROL);
971 if (control < 0) {
972 ret = control;
973 goto out;
974 }
975
976 control &= ~mask;
977 control |= value;
978
979 ret = i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL, control);
980out:
981 mutex_unlock(lock);
982
983 return ret;
984}
985
986static unsigned long ds3231_clk_sqw_recalc_rate(struct clk_hw *hw,
987 unsigned long parent_rate)
988{
989 struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
990 int control;
991 int rate_sel = 0;
992
993 control = i2c_smbus_read_byte_data(ds1307->client, DS1337_REG_CONTROL);
994 if (control < 0)
995 return control;
996 if (control & DS1337_BIT_RS1)
997 rate_sel += 1;
998 if (control & DS1337_BIT_RS2)
999 rate_sel += 2;
1000
1001 return ds3231_clk_sqw_rates[rate_sel];
1002}
1003
1004static long ds3231_clk_sqw_round_rate(struct clk_hw *hw, unsigned long rate,
1005 unsigned long *prate)
1006{
1007 int i;
1008
1009 for (i = ARRAY_SIZE(ds3231_clk_sqw_rates) - 1; i >= 0; i--) {
1010 if (ds3231_clk_sqw_rates[i] <= rate)
1011 return ds3231_clk_sqw_rates[i];
1012 }
1013
1014 return 0;
1015}
1016
1017static int ds3231_clk_sqw_set_rate(struct clk_hw *hw, unsigned long rate,
1018 unsigned long parent_rate)
1019{
1020 struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
1021 int control = 0;
1022 int rate_sel;
1023
1024 for (rate_sel = 0; rate_sel < ARRAY_SIZE(ds3231_clk_sqw_rates);
1025 rate_sel++) {
1026 if (ds3231_clk_sqw_rates[rate_sel] == rate)
1027 break;
1028 }
1029
1030 if (rate_sel == ARRAY_SIZE(ds3231_clk_sqw_rates))
1031 return -EINVAL;
1032
1033 if (rate_sel & 1)
1034 control |= DS1337_BIT_RS1;
1035 if (rate_sel & 2)
1036 control |= DS1337_BIT_RS2;
1037
1038 return ds1337_write_control(ds1307, DS1337_BIT_RS1 | DS1337_BIT_RS2,
1039 control);
1040}
1041
1042static int ds3231_clk_sqw_prepare(struct clk_hw *hw)
1043{
1044 struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
1045
1046 return ds1337_write_control(ds1307, DS1337_BIT_INTCN, 0);
1047}
1048
1049static void ds3231_clk_sqw_unprepare(struct clk_hw *hw)
1050{
1051 struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
1052
1053 ds1337_write_control(ds1307, DS1337_BIT_INTCN, DS1337_BIT_INTCN);
1054}
1055
1056static int ds3231_clk_sqw_is_prepared(struct clk_hw *hw)
1057{
1058 struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
1059 int control;
1060
1061 control = i2c_smbus_read_byte_data(ds1307->client, DS1337_REG_CONTROL);
1062 if (control < 0)
1063 return control;
1064
1065 return !(control & DS1337_BIT_INTCN);
1066}
1067
1068static const struct clk_ops ds3231_clk_sqw_ops = {
1069 .prepare = ds3231_clk_sqw_prepare,
1070 .unprepare = ds3231_clk_sqw_unprepare,
1071 .is_prepared = ds3231_clk_sqw_is_prepared,
1072 .recalc_rate = ds3231_clk_sqw_recalc_rate,
1073 .round_rate = ds3231_clk_sqw_round_rate,
1074 .set_rate = ds3231_clk_sqw_set_rate,
1075};
1076
1077static unsigned long ds3231_clk_32khz_recalc_rate(struct clk_hw *hw,
1078 unsigned long parent_rate)
1079{
1080 return 32768;
1081}
1082
1083static int ds3231_clk_32khz_control(struct ds1307 *ds1307, bool enable)
1084{
1085 struct i2c_client *client = ds1307->client;
1086 struct mutex *lock = &ds1307->rtc->ops_lock;
1087 int status;
1088 int ret;
1089
1090 mutex_lock(lock);
1091
1092 status = i2c_smbus_read_byte_data(client, DS1337_REG_STATUS);
1093 if (status < 0) {
1094 ret = status;
1095 goto out;
1096 }
1097
1098 if (enable)
1099 status |= DS3231_BIT_EN32KHZ;
1100 else
1101 status &= ~DS3231_BIT_EN32KHZ;
1102
1103 ret = i2c_smbus_write_byte_data(client, DS1337_REG_STATUS, status);
1104out:
1105 mutex_unlock(lock);
1106
1107 return ret;
1108}
1109
1110static int ds3231_clk_32khz_prepare(struct clk_hw *hw)
1111{
1112 struct ds1307 *ds1307 = clk_32khz_to_ds1307(hw);
1113
1114 return ds3231_clk_32khz_control(ds1307, true);
1115}
1116
1117static void ds3231_clk_32khz_unprepare(struct clk_hw *hw)
1118{
1119 struct ds1307 *ds1307 = clk_32khz_to_ds1307(hw);
1120
1121 ds3231_clk_32khz_control(ds1307, false);
1122}
1123
1124static int ds3231_clk_32khz_is_prepared(struct clk_hw *hw)
1125{
1126 struct ds1307 *ds1307 = clk_32khz_to_ds1307(hw);
1127 int status;
1128
1129 status = i2c_smbus_read_byte_data(ds1307->client, DS1337_REG_STATUS);
1130 if (status < 0)
1131 return status;
1132
1133 return !!(status & DS3231_BIT_EN32KHZ);
1134}
1135
1136static const struct clk_ops ds3231_clk_32khz_ops = {
1137 .prepare = ds3231_clk_32khz_prepare,
1138 .unprepare = ds3231_clk_32khz_unprepare,
1139 .is_prepared = ds3231_clk_32khz_is_prepared,
1140 .recalc_rate = ds3231_clk_32khz_recalc_rate,
1141};
1142
1143static struct clk_init_data ds3231_clks_init[] = {
1144 [DS3231_CLK_SQW] = {
1145 .name = "ds3231_clk_sqw",
1146 .ops = &ds3231_clk_sqw_ops,
1147 .flags = CLK_IS_ROOT,
1148 },
1149 [DS3231_CLK_32KHZ] = {
1150 .name = "ds3231_clk_32khz",
1151 .ops = &ds3231_clk_32khz_ops,
1152 .flags = CLK_IS_ROOT,
1153 },
1154};
1155
1156static int ds3231_clks_register(struct ds1307 *ds1307)
1157{
1158 struct i2c_client *client = ds1307->client;
1159 struct device_node *node = client->dev.of_node;
1160 struct clk_onecell_data *onecell;
1161 int i;
1162
1163 onecell = devm_kzalloc(&client->dev, sizeof(*onecell), GFP_KERNEL);
1164 if (!onecell)
1165 return -ENOMEM;
1166
1167 onecell->clk_num = ARRAY_SIZE(ds3231_clks_init);
1168 onecell->clks = devm_kcalloc(&client->dev, onecell->clk_num,
1169 sizeof(onecell->clks[0]), GFP_KERNEL);
1170 if (!onecell->clks)
1171 return -ENOMEM;
1172
1173 for (i = 0; i < ARRAY_SIZE(ds3231_clks_init); i++) {
1174 struct clk_init_data init = ds3231_clks_init[i];
1175
1176 /*
1177 * Interrupt signal due to alarm conditions and square-wave
1178 * output share same pin, so don't initialize both.
1179 */
1180 if (i == DS3231_CLK_SQW && test_bit(HAS_ALARM, &ds1307->flags))
1181 continue;
1182
1183 /* optional override of the clockname */
1184 of_property_read_string_index(node, "clock-output-names", i,
1185 &init.name);
1186 ds1307->clks[i].init = &init;
1187
1188 onecell->clks[i] = devm_clk_register(&client->dev,
1189 &ds1307->clks[i]);
1190 if (IS_ERR(onecell->clks[i]))
1191 return PTR_ERR(onecell->clks[i]);
1192 }
1193
1194 if (!node)
1195 return 0;
1196
1197 of_clk_add_provider(node, of_clk_src_onecell_get, onecell);
1198
1199 return 0;
1200}
1201
1202static void ds1307_clks_register(struct ds1307 *ds1307)
1203{
1204 int ret;
1205
1206 if (ds1307->type != ds_3231)
1207 return;
1208
1209 ret = ds3231_clks_register(ds1307);
1210 if (ret) {
1211 dev_warn(&ds1307->client->dev,
1212 "unable to register clock device %d\n", ret);
1213 }
1214}
1215
1216#else
1217
1218static void ds1307_clks_register(struct ds1307 *ds1307)
1219{
1220}
1221
1222#endif /* CONFIG_COMMON_CLK */
1223
1224static int ds1307_probe(struct i2c_client *client,
1225 const struct i2c_device_id *id)
1226{
1227 struct ds1307 *ds1307;
1228 int err = -ENODEV;
1229 int tmp;
1230 struct chip_desc *chip = &chips[id->driver_data];
1231 struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
1232 bool want_irq = false;
1233 bool ds1307_can_wakeup_device = false;
1234 unsigned char *buf;
1235 struct ds1307_platform_data *pdata = dev_get_platdata(&client->dev);
1236 irq_handler_t irq_handler = ds1307_irq;
1237
1238 static const int bbsqi_bitpos[] = {
1239 [ds_1337] = 0,
1240 [ds_1339] = DS1339_BIT_BBSQI,
1241 [ds_3231] = DS3231_BIT_BBSQW,
1242 };
1243 const struct rtc_class_ops *rtc_ops = &ds13xx_rtc_ops;
1244
1245 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)
1246 && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
1247 return -EIO;
1248
1249 ds1307 = devm_kzalloc(&client->dev, sizeof(struct ds1307), GFP_KERNEL);
1250 if (!ds1307)
1251 return -ENOMEM;
1252
1253 i2c_set_clientdata(client, ds1307);
1254
1255 ds1307->client = client;
1256 ds1307->type = id->driver_data;
1257
1258 if (!pdata && client->dev.of_node)
1259 ds1307_trickle_of_init(client, chip);
1260 else if (pdata && pdata->trickle_charger_setup)
1261 chip->trickle_charger_setup = pdata->trickle_charger_setup;
1262
1263 if (chip->trickle_charger_setup && chip->trickle_charger_reg) {
1264 dev_dbg(&client->dev, "writing trickle charger info 0x%x to 0x%x\n",
1265 DS13XX_TRICKLE_CHARGER_MAGIC | chip->trickle_charger_setup,
1266 chip->trickle_charger_reg);
1267 i2c_smbus_write_byte_data(client, chip->trickle_charger_reg,
1268 DS13XX_TRICKLE_CHARGER_MAGIC |
1269 chip->trickle_charger_setup);
1270 }
1271
1272 buf = ds1307->regs;
1273 if (i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) {
1274 ds1307->read_block_data = ds1307_native_smbus_read_block_data;
1275 ds1307->write_block_data = ds1307_native_smbus_write_block_data;
1276 } else {
1277 ds1307->read_block_data = ds1307_read_block_data;
1278 ds1307->write_block_data = ds1307_write_block_data;
1279 }
1280
1281#ifdef CONFIG_OF
1282/*
1283 * For devices with no IRQ directly connected to the SoC, the RTC chip
1284 * can be forced as a wakeup source by stating that explicitly in
1285 * the device's .dts file using the "wakeup-source" boolean property.
1286 * If the "wakeup-source" property is set, don't request an IRQ.
1287 * This will guarantee the 'wakealarm' sysfs entry is available on the device,
1288 * if supported by the RTC.
1289 */
1290 if (of_property_read_bool(client->dev.of_node, "wakeup-source")) {
1291 ds1307_can_wakeup_device = true;
1292 }
1293#endif
1294
1295 switch (ds1307->type) {
1296 case ds_1337:
1297 case ds_1339:
1298 case ds_3231:
1299 /* get registers that the "rtc" read below won't read... */
1300 tmp = ds1307->read_block_data(ds1307->client,
1301 DS1337_REG_CONTROL, 2, buf);
1302 if (tmp != 2) {
1303 dev_dbg(&client->dev, "read error %d\n", tmp);
1304 err = -EIO;
1305 goto exit;
1306 }
1307
1308 /* oscillator off? turn it on, so clock can tick. */
1309 if (ds1307->regs[0] & DS1337_BIT_nEOSC)
1310 ds1307->regs[0] &= ~DS1337_BIT_nEOSC;
1311
1312 /*
1313 * Using IRQ or defined as wakeup-source?
1314 * Disable the square wave and both alarms.
1315 * For some variants, be sure alarms can trigger when we're
1316 * running on Vbackup (BBSQI/BBSQW)
1317 */
1318 if (chip->alarm && (ds1307->client->irq > 0 ||
1319 ds1307_can_wakeup_device)) {
1320 ds1307->regs[0] |= DS1337_BIT_INTCN
1321 | bbsqi_bitpos[ds1307->type];
1322 ds1307->regs[0] &= ~(DS1337_BIT_A2IE | DS1337_BIT_A1IE);
1323
1324 want_irq = true;
1325 }
1326
1327 i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL,
1328 ds1307->regs[0]);
1329
1330 /* oscillator fault? clear flag, and warn */
1331 if (ds1307->regs[1] & DS1337_BIT_OSF) {
1332 i2c_smbus_write_byte_data(client, DS1337_REG_STATUS,
1333 ds1307->regs[1] & ~DS1337_BIT_OSF);
1334 dev_warn(&client->dev, "SET TIME!\n");
1335 }
1336 break;
1337
1338 case rx_8025:
1339 tmp = i2c_smbus_read_i2c_block_data(ds1307->client,
1340 RX8025_REG_CTRL1 << 4 | 0x08, 2, buf);
1341 if (tmp != 2) {
1342 dev_dbg(&client->dev, "read error %d\n", tmp);
1343 err = -EIO;
1344 goto exit;
1345 }
1346
1347 /* oscillator off? turn it on, so clock can tick. */
1348 if (!(ds1307->regs[1] & RX8025_BIT_XST)) {
1349 ds1307->regs[1] |= RX8025_BIT_XST;
1350 i2c_smbus_write_byte_data(client,
1351 RX8025_REG_CTRL2 << 4 | 0x08,
1352 ds1307->regs[1]);
1353 dev_warn(&client->dev,
1354 "oscillator stop detected - SET TIME!\n");
1355 }
1356
1357 if (ds1307->regs[1] & RX8025_BIT_PON) {
1358 ds1307->regs[1] &= ~RX8025_BIT_PON;
1359 i2c_smbus_write_byte_data(client,
1360 RX8025_REG_CTRL2 << 4 | 0x08,
1361 ds1307->regs[1]);
1362 dev_warn(&client->dev, "power-on detected\n");
1363 }
1364
1365 if (ds1307->regs[1] & RX8025_BIT_VDET) {
1366 ds1307->regs[1] &= ~RX8025_BIT_VDET;
1367 i2c_smbus_write_byte_data(client,
1368 RX8025_REG_CTRL2 << 4 | 0x08,
1369 ds1307->regs[1]);
1370 dev_warn(&client->dev, "voltage drop detected\n");
1371 }
1372
1373 /* make sure we are running in 24hour mode */
1374 if (!(ds1307->regs[0] & RX8025_BIT_2412)) {
1375 u8 hour;
1376
1377 /* switch to 24 hour mode */
1378 i2c_smbus_write_byte_data(client,
1379 RX8025_REG_CTRL1 << 4 | 0x08,
1380 ds1307->regs[0] |
1381 RX8025_BIT_2412);
1382
1383 tmp = i2c_smbus_read_i2c_block_data(ds1307->client,
1384 RX8025_REG_CTRL1 << 4 | 0x08, 2, buf);
1385 if (tmp != 2) {
1386 dev_dbg(&client->dev, "read error %d\n", tmp);
1387 err = -EIO;
1388 goto exit;
1389 }
1390
1391 /* correct hour */
1392 hour = bcd2bin(ds1307->regs[DS1307_REG_HOUR]);
1393 if (hour == 12)
1394 hour = 0;
1395 if (ds1307->regs[DS1307_REG_HOUR] & DS1307_BIT_PM)
1396 hour += 12;
1397
1398 i2c_smbus_write_byte_data(client,
1399 DS1307_REG_HOUR << 4 | 0x08,
1400 hour);
1401 }
1402 break;
1403 case ds_1388:
1404 ds1307->offset = 1; /* Seconds starts at 1 */
1405 break;
1406 case mcp794xx:
1407 rtc_ops = &mcp794xx_rtc_ops;
1408 if (ds1307->client->irq > 0 && chip->alarm) {
1409 irq_handler = mcp794xx_irq;
1410 want_irq = true;
1411 }
1412 break;
1413 default:
1414 break;
1415 }
1416
1417read_rtc:
1418 /* read RTC registers */
1419 tmp = ds1307->read_block_data(ds1307->client, ds1307->offset, 8, buf);
1420 if (tmp != 8) {
1421 dev_dbg(&client->dev, "read error %d\n", tmp);
1422 err = -EIO;
1423 goto exit;
1424 }
1425
1426 /*
1427 * minimal sanity checking; some chips (like DS1340) don't
1428 * specify the extra bits as must-be-zero, but there are
1429 * still a few values that are clearly out-of-range.
1430 */
1431 tmp = ds1307->regs[DS1307_REG_SECS];
1432 switch (ds1307->type) {
1433 case ds_1307:
1434 case m41t00:
1435 /* clock halted? turn it on, so clock can tick. */
1436 if (tmp & DS1307_BIT_CH) {
1437 i2c_smbus_write_byte_data(client, DS1307_REG_SECS, 0);
1438 dev_warn(&client->dev, "SET TIME!\n");
1439 goto read_rtc;
1440 }
1441 break;
1442 case ds_1338:
1443 /* clock halted? turn it on, so clock can tick. */
1444 if (tmp & DS1307_BIT_CH)
1445 i2c_smbus_write_byte_data(client, DS1307_REG_SECS, 0);
1446
1447 /* oscillator fault? clear flag, and warn */
1448 if (ds1307->regs[DS1307_REG_CONTROL] & DS1338_BIT_OSF) {
1449 i2c_smbus_write_byte_data(client, DS1307_REG_CONTROL,
1450 ds1307->regs[DS1307_REG_CONTROL]
1451 & ~DS1338_BIT_OSF);
1452 dev_warn(&client->dev, "SET TIME!\n");
1453 goto read_rtc;
1454 }
1455 break;
1456 case ds_1340:
1457 /* clock halted? turn it on, so clock can tick. */
1458 if (tmp & DS1340_BIT_nEOSC)
1459 i2c_smbus_write_byte_data(client, DS1307_REG_SECS, 0);
1460
1461 tmp = i2c_smbus_read_byte_data(client, DS1340_REG_FLAG);
1462 if (tmp < 0) {
1463 dev_dbg(&client->dev, "read error %d\n", tmp);
1464 err = -EIO;
1465 goto exit;
1466 }
1467
1468 /* oscillator fault? clear flag, and warn */
1469 if (tmp & DS1340_BIT_OSF) {
1470 i2c_smbus_write_byte_data(client, DS1340_REG_FLAG, 0);
1471 dev_warn(&client->dev, "SET TIME!\n");
1472 }
1473 break;
1474 case mcp794xx:
1475 /* make sure that the backup battery is enabled */
1476 if (!(ds1307->regs[DS1307_REG_WDAY] & MCP794XX_BIT_VBATEN)) {
1477 i2c_smbus_write_byte_data(client, DS1307_REG_WDAY,
1478 ds1307->regs[DS1307_REG_WDAY]
1479 | MCP794XX_BIT_VBATEN);
1480 }
1481
1482 /* clock halted? turn it on, so clock can tick. */
1483 if (!(tmp & MCP794XX_BIT_ST)) {
1484 i2c_smbus_write_byte_data(client, DS1307_REG_SECS,
1485 MCP794XX_BIT_ST);
1486 dev_warn(&client->dev, "SET TIME!\n");
1487 goto read_rtc;
1488 }
1489
1490 break;
1491 default:
1492 break;
1493 }
1494
1495 tmp = ds1307->regs[DS1307_REG_HOUR];
1496 switch (ds1307->type) {
1497 case ds_1340:
1498 case m41t00:
1499 /*
1500 * NOTE: ignores century bits; fix before deploying
1501 * systems that will run through year 2100.
1502 */
1503 break;
1504 case rx_8025:
1505 break;
1506 default:
1507 if (!(tmp & DS1307_BIT_12HR))
1508 break;
1509
1510 /*
1511 * Be sure we're in 24 hour mode. Multi-master systems
1512 * take note...
1513 */
1514 tmp = bcd2bin(tmp & 0x1f);
1515 if (tmp == 12)
1516 tmp = 0;
1517 if (ds1307->regs[DS1307_REG_HOUR] & DS1307_BIT_PM)
1518 tmp += 12;
1519 i2c_smbus_write_byte_data(client,
1520 ds1307->offset + DS1307_REG_HOUR,
1521 bin2bcd(tmp));
1522 }
1523
1524 if (want_irq) {
1525 device_set_wakeup_capable(&client->dev, true);
1526 set_bit(HAS_ALARM, &ds1307->flags);
1527 }
1528 ds1307->rtc = devm_rtc_device_register(&client->dev, client->name,
1529 rtc_ops, THIS_MODULE);
1530 if (IS_ERR(ds1307->rtc)) {
1531 return PTR_ERR(ds1307->rtc);
1532 }
1533
1534 if (ds1307_can_wakeup_device && ds1307->client->irq <= 0) {
1535 /* Disable request for an IRQ */
1536 want_irq = false;
1537 dev_info(&client->dev, "'wakeup-source' is set, request for an IRQ is disabled!\n");
1538 /* We cannot support UIE mode if we do not have an IRQ line */
1539 ds1307->rtc->uie_unsupported = 1;
1540 }
1541
1542 if (want_irq) {
1543 err = devm_request_threaded_irq(&client->dev,
1544 client->irq, NULL, irq_handler,
1545 IRQF_SHARED | IRQF_ONESHOT,
1546 ds1307->rtc->name, client);
1547 if (err) {
1548 client->irq = 0;
1549 device_set_wakeup_capable(&client->dev, false);
1550 clear_bit(HAS_ALARM, &ds1307->flags);
1551 dev_err(&client->dev, "unable to request IRQ!\n");
1552 } else
1553 dev_dbg(&client->dev, "got IRQ %d\n", client->irq);
1554 }
1555
1556 if (chip->nvram_size) {
1557
1558 ds1307->nvram = devm_kzalloc(&client->dev,
1559 sizeof(struct bin_attribute),
1560 GFP_KERNEL);
1561 if (!ds1307->nvram) {
1562 dev_err(&client->dev, "cannot allocate memory for nvram sysfs\n");
1563 } else {
1564
1565 ds1307->nvram->attr.name = "nvram";
1566 ds1307->nvram->attr.mode = S_IRUGO | S_IWUSR;
1567
1568 sysfs_bin_attr_init(ds1307->nvram);
1569
1570 ds1307->nvram->read = ds1307_nvram_read;
1571 ds1307->nvram->write = ds1307_nvram_write;
1572 ds1307->nvram->size = chip->nvram_size;
1573 ds1307->nvram_offset = chip->nvram_offset;
1574
1575 err = sysfs_create_bin_file(&client->dev.kobj,
1576 ds1307->nvram);
1577 if (err) {
1578 dev_err(&client->dev,
1579 "unable to create sysfs file: %s\n",
1580 ds1307->nvram->attr.name);
1581 } else {
1582 set_bit(HAS_NVRAM, &ds1307->flags);
1583 dev_info(&client->dev, "%zu bytes nvram\n",
1584 ds1307->nvram->size);
1585 }
1586 }
1587 }
1588
1589 ds1307_hwmon_register(ds1307);
1590 ds1307_clks_register(ds1307);
1591
1592 return 0;
1593
1594exit:
1595 return err;
1596}
1597
1598static int ds1307_remove(struct i2c_client *client)
1599{
1600 struct ds1307 *ds1307 = i2c_get_clientdata(client);
1601
1602 if (test_and_clear_bit(HAS_NVRAM, &ds1307->flags))
1603 sysfs_remove_bin_file(&client->dev.kobj, ds1307->nvram);
1604
1605 return 0;
1606}
1607
1608static struct i2c_driver ds1307_driver = {
1609 .driver = {
1610 .name = "rtc-ds1307",
1611 },
1612 .probe = ds1307_probe,
1613 .remove = ds1307_remove,
1614 .id_table = ds1307_id,
1615};
1616
1617module_i2c_driver(ds1307_driver);
1618
1619MODULE_DESCRIPTION("RTC driver for DS1307 and similar chips");
1620MODULE_LICENSE("GPL");
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * rtc-ds1307.c - RTC driver for some mostly-compatible I2C chips.
4 *
5 * Copyright (C) 2005 James Chapman (ds1337 core)
6 * Copyright (C) 2006 David Brownell
7 * Copyright (C) 2009 Matthias Fuchs (rx8025 support)
8 * Copyright (C) 2012 Bertrand Achard (nvram access fixes)
9 */
10
11#include <linux/acpi.h>
12#include <linux/bcd.h>
13#include <linux/i2c.h>
14#include <linux/init.h>
15#include <linux/module.h>
16#include <linux/of_device.h>
17#include <linux/rtc/ds1307.h>
18#include <linux/rtc.h>
19#include <linux/slab.h>
20#include <linux/string.h>
21#include <linux/hwmon.h>
22#include <linux/hwmon-sysfs.h>
23#include <linux/clk-provider.h>
24#include <linux/regmap.h>
25
26/*
27 * We can't determine type by probing, but if we expect pre-Linux code
28 * to have set the chip up as a clock (turning on the oscillator and
29 * setting the date and time), Linux can ignore the non-clock features.
30 * That's a natural job for a factory or repair bench.
31 */
32enum ds_type {
33 ds_1307,
34 ds_1308,
35 ds_1337,
36 ds_1338,
37 ds_1339,
38 ds_1340,
39 ds_1341,
40 ds_1388,
41 ds_3231,
42 m41t0,
43 m41t00,
44 m41t11,
45 mcp794xx,
46 rx_8025,
47 rx_8130,
48 last_ds_type /* always last */
49 /* rs5c372 too? different address... */
50};
51
52/* RTC registers don't differ much, except for the century flag */
53#define DS1307_REG_SECS 0x00 /* 00-59 */
54# define DS1307_BIT_CH 0x80
55# define DS1340_BIT_nEOSC 0x80
56# define MCP794XX_BIT_ST 0x80
57#define DS1307_REG_MIN 0x01 /* 00-59 */
58# define M41T0_BIT_OF 0x80
59#define DS1307_REG_HOUR 0x02 /* 00-23, or 1-12{am,pm} */
60# define DS1307_BIT_12HR 0x40 /* in REG_HOUR */
61# define DS1307_BIT_PM 0x20 /* in REG_HOUR */
62# define DS1340_BIT_CENTURY_EN 0x80 /* in REG_HOUR */
63# define DS1340_BIT_CENTURY 0x40 /* in REG_HOUR */
64#define DS1307_REG_WDAY 0x03 /* 01-07 */
65# define MCP794XX_BIT_VBATEN 0x08
66#define DS1307_REG_MDAY 0x04 /* 01-31 */
67#define DS1307_REG_MONTH 0x05 /* 01-12 */
68# define DS1337_BIT_CENTURY 0x80 /* in REG_MONTH */
69#define DS1307_REG_YEAR 0x06 /* 00-99 */
70
71/*
72 * Other registers (control, status, alarms, trickle charge, NVRAM, etc)
73 * start at 7, and they differ a LOT. Only control and status matter for
74 * basic RTC date and time functionality; be careful using them.
75 */
76#define DS1307_REG_CONTROL 0x07 /* or ds1338 */
77# define DS1307_BIT_OUT 0x80
78# define DS1338_BIT_OSF 0x20
79# define DS1307_BIT_SQWE 0x10
80# define DS1307_BIT_RS1 0x02
81# define DS1307_BIT_RS0 0x01
82#define DS1337_REG_CONTROL 0x0e
83# define DS1337_BIT_nEOSC 0x80
84# define DS1339_BIT_BBSQI 0x20
85# define DS3231_BIT_BBSQW 0x40 /* same as BBSQI */
86# define DS1337_BIT_RS2 0x10
87# define DS1337_BIT_RS1 0x08
88# define DS1337_BIT_INTCN 0x04
89# define DS1337_BIT_A2IE 0x02
90# define DS1337_BIT_A1IE 0x01
91#define DS1340_REG_CONTROL 0x07
92# define DS1340_BIT_OUT 0x80
93# define DS1340_BIT_FT 0x40
94# define DS1340_BIT_CALIB_SIGN 0x20
95# define DS1340_M_CALIBRATION 0x1f
96#define DS1340_REG_FLAG 0x09
97# define DS1340_BIT_OSF 0x80
98#define DS1337_REG_STATUS 0x0f
99# define DS1337_BIT_OSF 0x80
100# define DS3231_BIT_EN32KHZ 0x08
101# define DS1337_BIT_A2I 0x02
102# define DS1337_BIT_A1I 0x01
103#define DS1339_REG_ALARM1_SECS 0x07
104
105#define DS13XX_TRICKLE_CHARGER_MAGIC 0xa0
106
107#define RX8025_REG_CTRL1 0x0e
108# define RX8025_BIT_2412 0x20
109#define RX8025_REG_CTRL2 0x0f
110# define RX8025_BIT_PON 0x10
111# define RX8025_BIT_VDET 0x40
112# define RX8025_BIT_XST 0x20
113
114#define RX8130_REG_ALARM_MIN 0x17
115#define RX8130_REG_ALARM_HOUR 0x18
116#define RX8130_REG_ALARM_WEEK_OR_DAY 0x19
117#define RX8130_REG_EXTENSION 0x1c
118#define RX8130_REG_EXTENSION_WADA BIT(3)
119#define RX8130_REG_FLAG 0x1d
120#define RX8130_REG_FLAG_VLF BIT(1)
121#define RX8130_REG_FLAG_AF BIT(3)
122#define RX8130_REG_CONTROL0 0x1e
123#define RX8130_REG_CONTROL0_AIE BIT(3)
124
125#define MCP794XX_REG_CONTROL 0x07
126# define MCP794XX_BIT_ALM0_EN 0x10
127# define MCP794XX_BIT_ALM1_EN 0x20
128#define MCP794XX_REG_ALARM0_BASE 0x0a
129#define MCP794XX_REG_ALARM0_CTRL 0x0d
130#define MCP794XX_REG_ALARM1_BASE 0x11
131#define MCP794XX_REG_ALARM1_CTRL 0x14
132# define MCP794XX_BIT_ALMX_IF BIT(3)
133# define MCP794XX_BIT_ALMX_C0 BIT(4)
134# define MCP794XX_BIT_ALMX_C1 BIT(5)
135# define MCP794XX_BIT_ALMX_C2 BIT(6)
136# define MCP794XX_BIT_ALMX_POL BIT(7)
137# define MCP794XX_MSK_ALMX_MATCH (MCP794XX_BIT_ALMX_C0 | \
138 MCP794XX_BIT_ALMX_C1 | \
139 MCP794XX_BIT_ALMX_C2)
140
141#define M41TXX_REG_CONTROL 0x07
142# define M41TXX_BIT_OUT BIT(7)
143# define M41TXX_BIT_FT BIT(6)
144# define M41TXX_BIT_CALIB_SIGN BIT(5)
145# define M41TXX_M_CALIBRATION GENMASK(4, 0)
146
147/* negative offset step is -2.034ppm */
148#define M41TXX_NEG_OFFSET_STEP_PPB 2034
149/* positive offset step is +4.068ppm */
150#define M41TXX_POS_OFFSET_STEP_PPB 4068
151/* Min and max values supported with 'offset' interface by M41TXX */
152#define M41TXX_MIN_OFFSET ((-31) * M41TXX_NEG_OFFSET_STEP_PPB)
153#define M41TXX_MAX_OFFSET ((31) * M41TXX_POS_OFFSET_STEP_PPB)
154
155struct ds1307 {
156 enum ds_type type;
157 unsigned long flags;
158#define HAS_NVRAM 0 /* bit 0 == sysfs file active */
159#define HAS_ALARM 1 /* bit 1 == irq claimed */
160 struct device *dev;
161 struct regmap *regmap;
162 const char *name;
163 struct rtc_device *rtc;
164#ifdef CONFIG_COMMON_CLK
165 struct clk_hw clks[2];
166#endif
167};
168
169struct chip_desc {
170 unsigned alarm:1;
171 u16 nvram_offset;
172 u16 nvram_size;
173 u8 offset; /* register's offset */
174 u8 century_reg;
175 u8 century_enable_bit;
176 u8 century_bit;
177 u8 bbsqi_bit;
178 irq_handler_t irq_handler;
179 const struct rtc_class_ops *rtc_ops;
180 u16 trickle_charger_reg;
181 u8 (*do_trickle_setup)(struct ds1307 *, u32,
182 bool);
183};
184
185static const struct chip_desc chips[last_ds_type];
186
187static int ds1307_get_time(struct device *dev, struct rtc_time *t)
188{
189 struct ds1307 *ds1307 = dev_get_drvdata(dev);
190 int tmp, ret;
191 const struct chip_desc *chip = &chips[ds1307->type];
192 u8 regs[7];
193
194 if (ds1307->type == rx_8130) {
195 unsigned int regflag;
196 ret = regmap_read(ds1307->regmap, RX8130_REG_FLAG, ®flag);
197 if (ret) {
198 dev_err(dev, "%s error %d\n", "read", ret);
199 return ret;
200 }
201
202 if (regflag & RX8130_REG_FLAG_VLF) {
203 dev_warn_once(dev, "oscillator failed, set time!\n");
204 return -EINVAL;
205 }
206 }
207
208 /* read the RTC date and time registers all at once */
209 ret = regmap_bulk_read(ds1307->regmap, chip->offset, regs,
210 sizeof(regs));
211 if (ret) {
212 dev_err(dev, "%s error %d\n", "read", ret);
213 return ret;
214 }
215
216 dev_dbg(dev, "%s: %7ph\n", "read", regs);
217
218 /* if oscillator fail bit is set, no data can be trusted */
219 if (ds1307->type == m41t0 &&
220 regs[DS1307_REG_MIN] & M41T0_BIT_OF) {
221 dev_warn_once(dev, "oscillator failed, set time!\n");
222 return -EINVAL;
223 }
224
225 tmp = regs[DS1307_REG_SECS];
226 switch (ds1307->type) {
227 case ds_1307:
228 case m41t0:
229 case m41t00:
230 case m41t11:
231 if (tmp & DS1307_BIT_CH)
232 return -EINVAL;
233 break;
234 case ds_1308:
235 case ds_1338:
236 if (tmp & DS1307_BIT_CH)
237 return -EINVAL;
238
239 ret = regmap_read(ds1307->regmap, DS1307_REG_CONTROL, &tmp);
240 if (ret)
241 return ret;
242 if (tmp & DS1338_BIT_OSF)
243 return -EINVAL;
244 break;
245 case ds_1340:
246 if (tmp & DS1340_BIT_nEOSC)
247 return -EINVAL;
248
249 ret = regmap_read(ds1307->regmap, DS1340_REG_FLAG, &tmp);
250 if (ret)
251 return ret;
252 if (tmp & DS1340_BIT_OSF)
253 return -EINVAL;
254 break;
255 case mcp794xx:
256 if (!(tmp & MCP794XX_BIT_ST))
257 return -EINVAL;
258
259 break;
260 default:
261 break;
262 }
263
264 t->tm_sec = bcd2bin(regs[DS1307_REG_SECS] & 0x7f);
265 t->tm_min = bcd2bin(regs[DS1307_REG_MIN] & 0x7f);
266 tmp = regs[DS1307_REG_HOUR] & 0x3f;
267 t->tm_hour = bcd2bin(tmp);
268 t->tm_wday = bcd2bin(regs[DS1307_REG_WDAY] & 0x07) - 1;
269 t->tm_mday = bcd2bin(regs[DS1307_REG_MDAY] & 0x3f);
270 tmp = regs[DS1307_REG_MONTH] & 0x1f;
271 t->tm_mon = bcd2bin(tmp) - 1;
272 t->tm_year = bcd2bin(regs[DS1307_REG_YEAR]) + 100;
273
274 if (regs[chip->century_reg] & chip->century_bit &&
275 IS_ENABLED(CONFIG_RTC_DRV_DS1307_CENTURY))
276 t->tm_year += 100;
277
278 dev_dbg(dev, "%s secs=%d, mins=%d, "
279 "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
280 "read", t->tm_sec, t->tm_min,
281 t->tm_hour, t->tm_mday,
282 t->tm_mon, t->tm_year, t->tm_wday);
283
284 return 0;
285}
286
287static int ds1307_set_time(struct device *dev, struct rtc_time *t)
288{
289 struct ds1307 *ds1307 = dev_get_drvdata(dev);
290 const struct chip_desc *chip = &chips[ds1307->type];
291 int result;
292 int tmp;
293 u8 regs[7];
294
295 dev_dbg(dev, "%s secs=%d, mins=%d, "
296 "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
297 "write", t->tm_sec, t->tm_min,
298 t->tm_hour, t->tm_mday,
299 t->tm_mon, t->tm_year, t->tm_wday);
300
301 if (t->tm_year < 100)
302 return -EINVAL;
303
304#ifdef CONFIG_RTC_DRV_DS1307_CENTURY
305 if (t->tm_year > (chip->century_bit ? 299 : 199))
306 return -EINVAL;
307#else
308 if (t->tm_year > 199)
309 return -EINVAL;
310#endif
311
312 regs[DS1307_REG_SECS] = bin2bcd(t->tm_sec);
313 regs[DS1307_REG_MIN] = bin2bcd(t->tm_min);
314 regs[DS1307_REG_HOUR] = bin2bcd(t->tm_hour);
315 regs[DS1307_REG_WDAY] = bin2bcd(t->tm_wday + 1);
316 regs[DS1307_REG_MDAY] = bin2bcd(t->tm_mday);
317 regs[DS1307_REG_MONTH] = bin2bcd(t->tm_mon + 1);
318
319 /* assume 20YY not 19YY */
320 tmp = t->tm_year - 100;
321 regs[DS1307_REG_YEAR] = bin2bcd(tmp);
322
323 if (chip->century_enable_bit)
324 regs[chip->century_reg] |= chip->century_enable_bit;
325 if (t->tm_year > 199 && chip->century_bit)
326 regs[chip->century_reg] |= chip->century_bit;
327
328 switch (ds1307->type) {
329 case ds_1308:
330 case ds_1338:
331 regmap_update_bits(ds1307->regmap, DS1307_REG_CONTROL,
332 DS1338_BIT_OSF, 0);
333 break;
334 case ds_1340:
335 regmap_update_bits(ds1307->regmap, DS1340_REG_FLAG,
336 DS1340_BIT_OSF, 0);
337 break;
338 case mcp794xx:
339 /*
340 * these bits were cleared when preparing the date/time
341 * values and need to be set again before writing the
342 * regsfer out to the device.
343 */
344 regs[DS1307_REG_SECS] |= MCP794XX_BIT_ST;
345 regs[DS1307_REG_WDAY] |= MCP794XX_BIT_VBATEN;
346 break;
347 default:
348 break;
349 }
350
351 dev_dbg(dev, "%s: %7ph\n", "write", regs);
352
353 result = regmap_bulk_write(ds1307->regmap, chip->offset, regs,
354 sizeof(regs));
355 if (result) {
356 dev_err(dev, "%s error %d\n", "write", result);
357 return result;
358 }
359
360 if (ds1307->type == rx_8130) {
361 /* clear Voltage Loss Flag as data is available now */
362 result = regmap_write(ds1307->regmap, RX8130_REG_FLAG,
363 ~(u8)RX8130_REG_FLAG_VLF);
364 if (result) {
365 dev_err(dev, "%s error %d\n", "write", result);
366 return result;
367 }
368 }
369
370 return 0;
371}
372
373static int ds1337_read_alarm(struct device *dev, struct rtc_wkalrm *t)
374{
375 struct ds1307 *ds1307 = dev_get_drvdata(dev);
376 int ret;
377 u8 regs[9];
378
379 if (!test_bit(HAS_ALARM, &ds1307->flags))
380 return -EINVAL;
381
382 /* read all ALARM1, ALARM2, and status registers at once */
383 ret = regmap_bulk_read(ds1307->regmap, DS1339_REG_ALARM1_SECS,
384 regs, sizeof(regs));
385 if (ret) {
386 dev_err(dev, "%s error %d\n", "alarm read", ret);
387 return ret;
388 }
389
390 dev_dbg(dev, "%s: %4ph, %3ph, %2ph\n", "alarm read",
391 ®s[0], ®s[4], ®s[7]);
392
393 /*
394 * report alarm time (ALARM1); assume 24 hour and day-of-month modes,
395 * and that all four fields are checked matches
396 */
397 t->time.tm_sec = bcd2bin(regs[0] & 0x7f);
398 t->time.tm_min = bcd2bin(regs[1] & 0x7f);
399 t->time.tm_hour = bcd2bin(regs[2] & 0x3f);
400 t->time.tm_mday = bcd2bin(regs[3] & 0x3f);
401
402 /* ... and status */
403 t->enabled = !!(regs[7] & DS1337_BIT_A1IE);
404 t->pending = !!(regs[8] & DS1337_BIT_A1I);
405
406 dev_dbg(dev, "%s secs=%d, mins=%d, "
407 "hours=%d, mday=%d, enabled=%d, pending=%d\n",
408 "alarm read", t->time.tm_sec, t->time.tm_min,
409 t->time.tm_hour, t->time.tm_mday,
410 t->enabled, t->pending);
411
412 return 0;
413}
414
415static int ds1337_set_alarm(struct device *dev, struct rtc_wkalrm *t)
416{
417 struct ds1307 *ds1307 = dev_get_drvdata(dev);
418 unsigned char regs[9];
419 u8 control, status;
420 int ret;
421
422 if (!test_bit(HAS_ALARM, &ds1307->flags))
423 return -EINVAL;
424
425 dev_dbg(dev, "%s secs=%d, mins=%d, "
426 "hours=%d, mday=%d, enabled=%d, pending=%d\n",
427 "alarm set", t->time.tm_sec, t->time.tm_min,
428 t->time.tm_hour, t->time.tm_mday,
429 t->enabled, t->pending);
430
431 /* read current status of both alarms and the chip */
432 ret = regmap_bulk_read(ds1307->regmap, DS1339_REG_ALARM1_SECS, regs,
433 sizeof(regs));
434 if (ret) {
435 dev_err(dev, "%s error %d\n", "alarm write", ret);
436 return ret;
437 }
438 control = regs[7];
439 status = regs[8];
440
441 dev_dbg(dev, "%s: %4ph, %3ph, %02x %02x\n", "alarm set (old status)",
442 ®s[0], ®s[4], control, status);
443
444 /* set ALARM1, using 24 hour and day-of-month modes */
445 regs[0] = bin2bcd(t->time.tm_sec);
446 regs[1] = bin2bcd(t->time.tm_min);
447 regs[2] = bin2bcd(t->time.tm_hour);
448 regs[3] = bin2bcd(t->time.tm_mday);
449
450 /* set ALARM2 to non-garbage */
451 regs[4] = 0;
452 regs[5] = 0;
453 regs[6] = 0;
454
455 /* disable alarms */
456 regs[7] = control & ~(DS1337_BIT_A1IE | DS1337_BIT_A2IE);
457 regs[8] = status & ~(DS1337_BIT_A1I | DS1337_BIT_A2I);
458
459 ret = regmap_bulk_write(ds1307->regmap, DS1339_REG_ALARM1_SECS, regs,
460 sizeof(regs));
461 if (ret) {
462 dev_err(dev, "can't set alarm time\n");
463 return ret;
464 }
465
466 /* optionally enable ALARM1 */
467 if (t->enabled) {
468 dev_dbg(dev, "alarm IRQ armed\n");
469 regs[7] |= DS1337_BIT_A1IE; /* only ALARM1 is used */
470 regmap_write(ds1307->regmap, DS1337_REG_CONTROL, regs[7]);
471 }
472
473 return 0;
474}
475
476static int ds1307_alarm_irq_enable(struct device *dev, unsigned int enabled)
477{
478 struct ds1307 *ds1307 = dev_get_drvdata(dev);
479
480 if (!test_bit(HAS_ALARM, &ds1307->flags))
481 return -ENOTTY;
482
483 return regmap_update_bits(ds1307->regmap, DS1337_REG_CONTROL,
484 DS1337_BIT_A1IE,
485 enabled ? DS1337_BIT_A1IE : 0);
486}
487
488static u8 do_trickle_setup_ds1339(struct ds1307 *ds1307, u32 ohms, bool diode)
489{
490 u8 setup = (diode) ? DS1307_TRICKLE_CHARGER_DIODE :
491 DS1307_TRICKLE_CHARGER_NO_DIODE;
492
493 switch (ohms) {
494 case 250:
495 setup |= DS1307_TRICKLE_CHARGER_250_OHM;
496 break;
497 case 2000:
498 setup |= DS1307_TRICKLE_CHARGER_2K_OHM;
499 break;
500 case 4000:
501 setup |= DS1307_TRICKLE_CHARGER_4K_OHM;
502 break;
503 default:
504 dev_warn(ds1307->dev,
505 "Unsupported ohm value %u in dt\n", ohms);
506 return 0;
507 }
508 return setup;
509}
510
511static irqreturn_t rx8130_irq(int irq, void *dev_id)
512{
513 struct ds1307 *ds1307 = dev_id;
514 struct mutex *lock = &ds1307->rtc->ops_lock;
515 u8 ctl[3];
516 int ret;
517
518 mutex_lock(lock);
519
520 /* Read control registers. */
521 ret = regmap_bulk_read(ds1307->regmap, RX8130_REG_EXTENSION, ctl,
522 sizeof(ctl));
523 if (ret < 0)
524 goto out;
525 if (!(ctl[1] & RX8130_REG_FLAG_AF))
526 goto out;
527 ctl[1] &= ~RX8130_REG_FLAG_AF;
528 ctl[2] &= ~RX8130_REG_CONTROL0_AIE;
529
530 ret = regmap_bulk_write(ds1307->regmap, RX8130_REG_EXTENSION, ctl,
531 sizeof(ctl));
532 if (ret < 0)
533 goto out;
534
535 rtc_update_irq(ds1307->rtc, 1, RTC_AF | RTC_IRQF);
536
537out:
538 mutex_unlock(lock);
539
540 return IRQ_HANDLED;
541}
542
543static int rx8130_read_alarm(struct device *dev, struct rtc_wkalrm *t)
544{
545 struct ds1307 *ds1307 = dev_get_drvdata(dev);
546 u8 ald[3], ctl[3];
547 int ret;
548
549 if (!test_bit(HAS_ALARM, &ds1307->flags))
550 return -EINVAL;
551
552 /* Read alarm registers. */
553 ret = regmap_bulk_read(ds1307->regmap, RX8130_REG_ALARM_MIN, ald,
554 sizeof(ald));
555 if (ret < 0)
556 return ret;
557
558 /* Read control registers. */
559 ret = regmap_bulk_read(ds1307->regmap, RX8130_REG_EXTENSION, ctl,
560 sizeof(ctl));
561 if (ret < 0)
562 return ret;
563
564 t->enabled = !!(ctl[2] & RX8130_REG_CONTROL0_AIE);
565 t->pending = !!(ctl[1] & RX8130_REG_FLAG_AF);
566
567 /* Report alarm 0 time assuming 24-hour and day-of-month modes. */
568 t->time.tm_sec = -1;
569 t->time.tm_min = bcd2bin(ald[0] & 0x7f);
570 t->time.tm_hour = bcd2bin(ald[1] & 0x7f);
571 t->time.tm_wday = -1;
572 t->time.tm_mday = bcd2bin(ald[2] & 0x7f);
573 t->time.tm_mon = -1;
574 t->time.tm_year = -1;
575 t->time.tm_yday = -1;
576 t->time.tm_isdst = -1;
577
578 dev_dbg(dev, "%s, sec=%d min=%d hour=%d wday=%d mday=%d mon=%d enabled=%d\n",
579 __func__, t->time.tm_sec, t->time.tm_min, t->time.tm_hour,
580 t->time.tm_wday, t->time.tm_mday, t->time.tm_mon, t->enabled);
581
582 return 0;
583}
584
585static int rx8130_set_alarm(struct device *dev, struct rtc_wkalrm *t)
586{
587 struct ds1307 *ds1307 = dev_get_drvdata(dev);
588 u8 ald[3], ctl[3];
589 int ret;
590
591 if (!test_bit(HAS_ALARM, &ds1307->flags))
592 return -EINVAL;
593
594 dev_dbg(dev, "%s, sec=%d min=%d hour=%d wday=%d mday=%d mon=%d "
595 "enabled=%d pending=%d\n", __func__,
596 t->time.tm_sec, t->time.tm_min, t->time.tm_hour,
597 t->time.tm_wday, t->time.tm_mday, t->time.tm_mon,
598 t->enabled, t->pending);
599
600 /* Read control registers. */
601 ret = regmap_bulk_read(ds1307->regmap, RX8130_REG_EXTENSION, ctl,
602 sizeof(ctl));
603 if (ret < 0)
604 return ret;
605
606 ctl[0] &= RX8130_REG_EXTENSION_WADA;
607 ctl[1] &= ~RX8130_REG_FLAG_AF;
608 ctl[2] &= ~RX8130_REG_CONTROL0_AIE;
609
610 ret = regmap_bulk_write(ds1307->regmap, RX8130_REG_EXTENSION, ctl,
611 sizeof(ctl));
612 if (ret < 0)
613 return ret;
614
615 /* Hardware alarm precision is 1 minute! */
616 ald[0] = bin2bcd(t->time.tm_min);
617 ald[1] = bin2bcd(t->time.tm_hour);
618 ald[2] = bin2bcd(t->time.tm_mday);
619
620 ret = regmap_bulk_write(ds1307->regmap, RX8130_REG_ALARM_MIN, ald,
621 sizeof(ald));
622 if (ret < 0)
623 return ret;
624
625 if (!t->enabled)
626 return 0;
627
628 ctl[2] |= RX8130_REG_CONTROL0_AIE;
629
630 return regmap_write(ds1307->regmap, RX8130_REG_CONTROL0, ctl[2]);
631}
632
633static int rx8130_alarm_irq_enable(struct device *dev, unsigned int enabled)
634{
635 struct ds1307 *ds1307 = dev_get_drvdata(dev);
636 int ret, reg;
637
638 if (!test_bit(HAS_ALARM, &ds1307->flags))
639 return -EINVAL;
640
641 ret = regmap_read(ds1307->regmap, RX8130_REG_CONTROL0, ®);
642 if (ret < 0)
643 return ret;
644
645 if (enabled)
646 reg |= RX8130_REG_CONTROL0_AIE;
647 else
648 reg &= ~RX8130_REG_CONTROL0_AIE;
649
650 return regmap_write(ds1307->regmap, RX8130_REG_CONTROL0, reg);
651}
652
653static irqreturn_t mcp794xx_irq(int irq, void *dev_id)
654{
655 struct ds1307 *ds1307 = dev_id;
656 struct mutex *lock = &ds1307->rtc->ops_lock;
657 int reg, ret;
658
659 mutex_lock(lock);
660
661 /* Check and clear alarm 0 interrupt flag. */
662 ret = regmap_read(ds1307->regmap, MCP794XX_REG_ALARM0_CTRL, ®);
663 if (ret)
664 goto out;
665 if (!(reg & MCP794XX_BIT_ALMX_IF))
666 goto out;
667 reg &= ~MCP794XX_BIT_ALMX_IF;
668 ret = regmap_write(ds1307->regmap, MCP794XX_REG_ALARM0_CTRL, reg);
669 if (ret)
670 goto out;
671
672 /* Disable alarm 0. */
673 ret = regmap_update_bits(ds1307->regmap, MCP794XX_REG_CONTROL,
674 MCP794XX_BIT_ALM0_EN, 0);
675 if (ret)
676 goto out;
677
678 rtc_update_irq(ds1307->rtc, 1, RTC_AF | RTC_IRQF);
679
680out:
681 mutex_unlock(lock);
682
683 return IRQ_HANDLED;
684}
685
686static int mcp794xx_read_alarm(struct device *dev, struct rtc_wkalrm *t)
687{
688 struct ds1307 *ds1307 = dev_get_drvdata(dev);
689 u8 regs[10];
690 int ret;
691
692 if (!test_bit(HAS_ALARM, &ds1307->flags))
693 return -EINVAL;
694
695 /* Read control and alarm 0 registers. */
696 ret = regmap_bulk_read(ds1307->regmap, MCP794XX_REG_CONTROL, regs,
697 sizeof(regs));
698 if (ret)
699 return ret;
700
701 t->enabled = !!(regs[0] & MCP794XX_BIT_ALM0_EN);
702
703 /* Report alarm 0 time assuming 24-hour and day-of-month modes. */
704 t->time.tm_sec = bcd2bin(regs[3] & 0x7f);
705 t->time.tm_min = bcd2bin(regs[4] & 0x7f);
706 t->time.tm_hour = bcd2bin(regs[5] & 0x3f);
707 t->time.tm_wday = bcd2bin(regs[6] & 0x7) - 1;
708 t->time.tm_mday = bcd2bin(regs[7] & 0x3f);
709 t->time.tm_mon = bcd2bin(regs[8] & 0x1f) - 1;
710 t->time.tm_year = -1;
711 t->time.tm_yday = -1;
712 t->time.tm_isdst = -1;
713
714 dev_dbg(dev, "%s, sec=%d min=%d hour=%d wday=%d mday=%d mon=%d "
715 "enabled=%d polarity=%d irq=%d match=%lu\n", __func__,
716 t->time.tm_sec, t->time.tm_min, t->time.tm_hour,
717 t->time.tm_wday, t->time.tm_mday, t->time.tm_mon, t->enabled,
718 !!(regs[6] & MCP794XX_BIT_ALMX_POL),
719 !!(regs[6] & MCP794XX_BIT_ALMX_IF),
720 (regs[6] & MCP794XX_MSK_ALMX_MATCH) >> 4);
721
722 return 0;
723}
724
725/*
726 * We may have a random RTC weekday, therefore calculate alarm weekday based
727 * on current weekday we read from the RTC timekeeping regs
728 */
729static int mcp794xx_alm_weekday(struct device *dev, struct rtc_time *tm_alarm)
730{
731 struct rtc_time tm_now;
732 int days_now, days_alarm, ret;
733
734 ret = ds1307_get_time(dev, &tm_now);
735 if (ret)
736 return ret;
737
738 days_now = div_s64(rtc_tm_to_time64(&tm_now), 24 * 60 * 60);
739 days_alarm = div_s64(rtc_tm_to_time64(tm_alarm), 24 * 60 * 60);
740
741 return (tm_now.tm_wday + days_alarm - days_now) % 7 + 1;
742}
743
744static int mcp794xx_set_alarm(struct device *dev, struct rtc_wkalrm *t)
745{
746 struct ds1307 *ds1307 = dev_get_drvdata(dev);
747 unsigned char regs[10];
748 int wday, ret;
749
750 if (!test_bit(HAS_ALARM, &ds1307->flags))
751 return -EINVAL;
752
753 wday = mcp794xx_alm_weekday(dev, &t->time);
754 if (wday < 0)
755 return wday;
756
757 dev_dbg(dev, "%s, sec=%d min=%d hour=%d wday=%d mday=%d mon=%d "
758 "enabled=%d pending=%d\n", __func__,
759 t->time.tm_sec, t->time.tm_min, t->time.tm_hour,
760 t->time.tm_wday, t->time.tm_mday, t->time.tm_mon,
761 t->enabled, t->pending);
762
763 /* Read control and alarm 0 registers. */
764 ret = regmap_bulk_read(ds1307->regmap, MCP794XX_REG_CONTROL, regs,
765 sizeof(regs));
766 if (ret)
767 return ret;
768
769 /* Set alarm 0, using 24-hour and day-of-month modes. */
770 regs[3] = bin2bcd(t->time.tm_sec);
771 regs[4] = bin2bcd(t->time.tm_min);
772 regs[5] = bin2bcd(t->time.tm_hour);
773 regs[6] = wday;
774 regs[7] = bin2bcd(t->time.tm_mday);
775 regs[8] = bin2bcd(t->time.tm_mon + 1);
776
777 /* Clear the alarm 0 interrupt flag. */
778 regs[6] &= ~MCP794XX_BIT_ALMX_IF;
779 /* Set alarm match: second, minute, hour, day, date, month. */
780 regs[6] |= MCP794XX_MSK_ALMX_MATCH;
781 /* Disable interrupt. We will not enable until completely programmed */
782 regs[0] &= ~MCP794XX_BIT_ALM0_EN;
783
784 ret = regmap_bulk_write(ds1307->regmap, MCP794XX_REG_CONTROL, regs,
785 sizeof(regs));
786 if (ret)
787 return ret;
788
789 if (!t->enabled)
790 return 0;
791 regs[0] |= MCP794XX_BIT_ALM0_EN;
792 return regmap_write(ds1307->regmap, MCP794XX_REG_CONTROL, regs[0]);
793}
794
795static int mcp794xx_alarm_irq_enable(struct device *dev, unsigned int enabled)
796{
797 struct ds1307 *ds1307 = dev_get_drvdata(dev);
798
799 if (!test_bit(HAS_ALARM, &ds1307->flags))
800 return -EINVAL;
801
802 return regmap_update_bits(ds1307->regmap, MCP794XX_REG_CONTROL,
803 MCP794XX_BIT_ALM0_EN,
804 enabled ? MCP794XX_BIT_ALM0_EN : 0);
805}
806
807static int m41txx_rtc_read_offset(struct device *dev, long *offset)
808{
809 struct ds1307 *ds1307 = dev_get_drvdata(dev);
810 unsigned int ctrl_reg;
811 u8 val;
812
813 regmap_read(ds1307->regmap, M41TXX_REG_CONTROL, &ctrl_reg);
814
815 val = ctrl_reg & M41TXX_M_CALIBRATION;
816
817 /* check if positive */
818 if (ctrl_reg & M41TXX_BIT_CALIB_SIGN)
819 *offset = (val * M41TXX_POS_OFFSET_STEP_PPB);
820 else
821 *offset = -(val * M41TXX_NEG_OFFSET_STEP_PPB);
822
823 return 0;
824}
825
826static int m41txx_rtc_set_offset(struct device *dev, long offset)
827{
828 struct ds1307 *ds1307 = dev_get_drvdata(dev);
829 unsigned int ctrl_reg;
830
831 if ((offset < M41TXX_MIN_OFFSET) || (offset > M41TXX_MAX_OFFSET))
832 return -ERANGE;
833
834 if (offset >= 0) {
835 ctrl_reg = DIV_ROUND_CLOSEST(offset,
836 M41TXX_POS_OFFSET_STEP_PPB);
837 ctrl_reg |= M41TXX_BIT_CALIB_SIGN;
838 } else {
839 ctrl_reg = DIV_ROUND_CLOSEST(abs(offset),
840 M41TXX_NEG_OFFSET_STEP_PPB);
841 }
842
843 return regmap_update_bits(ds1307->regmap, M41TXX_REG_CONTROL,
844 M41TXX_M_CALIBRATION | M41TXX_BIT_CALIB_SIGN,
845 ctrl_reg);
846}
847
848static const struct rtc_class_ops rx8130_rtc_ops = {
849 .read_time = ds1307_get_time,
850 .set_time = ds1307_set_time,
851 .read_alarm = rx8130_read_alarm,
852 .set_alarm = rx8130_set_alarm,
853 .alarm_irq_enable = rx8130_alarm_irq_enable,
854};
855
856static const struct rtc_class_ops mcp794xx_rtc_ops = {
857 .read_time = ds1307_get_time,
858 .set_time = ds1307_set_time,
859 .read_alarm = mcp794xx_read_alarm,
860 .set_alarm = mcp794xx_set_alarm,
861 .alarm_irq_enable = mcp794xx_alarm_irq_enable,
862};
863
864static const struct rtc_class_ops m41txx_rtc_ops = {
865 .read_time = ds1307_get_time,
866 .set_time = ds1307_set_time,
867 .read_alarm = ds1337_read_alarm,
868 .set_alarm = ds1337_set_alarm,
869 .alarm_irq_enable = ds1307_alarm_irq_enable,
870 .read_offset = m41txx_rtc_read_offset,
871 .set_offset = m41txx_rtc_set_offset,
872};
873
874static const struct chip_desc chips[last_ds_type] = {
875 [ds_1307] = {
876 .nvram_offset = 8,
877 .nvram_size = 56,
878 },
879 [ds_1308] = {
880 .nvram_offset = 8,
881 .nvram_size = 56,
882 },
883 [ds_1337] = {
884 .alarm = 1,
885 .century_reg = DS1307_REG_MONTH,
886 .century_bit = DS1337_BIT_CENTURY,
887 },
888 [ds_1338] = {
889 .nvram_offset = 8,
890 .nvram_size = 56,
891 },
892 [ds_1339] = {
893 .alarm = 1,
894 .century_reg = DS1307_REG_MONTH,
895 .century_bit = DS1337_BIT_CENTURY,
896 .bbsqi_bit = DS1339_BIT_BBSQI,
897 .trickle_charger_reg = 0x10,
898 .do_trickle_setup = &do_trickle_setup_ds1339,
899 },
900 [ds_1340] = {
901 .century_reg = DS1307_REG_HOUR,
902 .century_enable_bit = DS1340_BIT_CENTURY_EN,
903 .century_bit = DS1340_BIT_CENTURY,
904 .do_trickle_setup = &do_trickle_setup_ds1339,
905 .trickle_charger_reg = 0x08,
906 },
907 [ds_1341] = {
908 .century_reg = DS1307_REG_MONTH,
909 .century_bit = DS1337_BIT_CENTURY,
910 },
911 [ds_1388] = {
912 .offset = 1,
913 .trickle_charger_reg = 0x0a,
914 },
915 [ds_3231] = {
916 .alarm = 1,
917 .century_reg = DS1307_REG_MONTH,
918 .century_bit = DS1337_BIT_CENTURY,
919 .bbsqi_bit = DS3231_BIT_BBSQW,
920 },
921 [rx_8130] = {
922 .alarm = 1,
923 /* this is battery backed SRAM */
924 .nvram_offset = 0x20,
925 .nvram_size = 4, /* 32bit (4 word x 8 bit) */
926 .offset = 0x10,
927 .irq_handler = rx8130_irq,
928 .rtc_ops = &rx8130_rtc_ops,
929 },
930 [m41t0] = {
931 .rtc_ops = &m41txx_rtc_ops,
932 },
933 [m41t00] = {
934 .rtc_ops = &m41txx_rtc_ops,
935 },
936 [m41t11] = {
937 /* this is battery backed SRAM */
938 .nvram_offset = 8,
939 .nvram_size = 56,
940 .rtc_ops = &m41txx_rtc_ops,
941 },
942 [mcp794xx] = {
943 .alarm = 1,
944 /* this is battery backed SRAM */
945 .nvram_offset = 0x20,
946 .nvram_size = 0x40,
947 .irq_handler = mcp794xx_irq,
948 .rtc_ops = &mcp794xx_rtc_ops,
949 },
950};
951
952static const struct i2c_device_id ds1307_id[] = {
953 { "ds1307", ds_1307 },
954 { "ds1308", ds_1308 },
955 { "ds1337", ds_1337 },
956 { "ds1338", ds_1338 },
957 { "ds1339", ds_1339 },
958 { "ds1388", ds_1388 },
959 { "ds1340", ds_1340 },
960 { "ds1341", ds_1341 },
961 { "ds3231", ds_3231 },
962 { "m41t0", m41t0 },
963 { "m41t00", m41t00 },
964 { "m41t11", m41t11 },
965 { "mcp7940x", mcp794xx },
966 { "mcp7941x", mcp794xx },
967 { "pt7c4338", ds_1307 },
968 { "rx8025", rx_8025 },
969 { "isl12057", ds_1337 },
970 { "rx8130", rx_8130 },
971 { }
972};
973MODULE_DEVICE_TABLE(i2c, ds1307_id);
974
975#ifdef CONFIG_OF
976static const struct of_device_id ds1307_of_match[] = {
977 {
978 .compatible = "dallas,ds1307",
979 .data = (void *)ds_1307
980 },
981 {
982 .compatible = "dallas,ds1308",
983 .data = (void *)ds_1308
984 },
985 {
986 .compatible = "dallas,ds1337",
987 .data = (void *)ds_1337
988 },
989 {
990 .compatible = "dallas,ds1338",
991 .data = (void *)ds_1338
992 },
993 {
994 .compatible = "dallas,ds1339",
995 .data = (void *)ds_1339
996 },
997 {
998 .compatible = "dallas,ds1388",
999 .data = (void *)ds_1388
1000 },
1001 {
1002 .compatible = "dallas,ds1340",
1003 .data = (void *)ds_1340
1004 },
1005 {
1006 .compatible = "dallas,ds1341",
1007 .data = (void *)ds_1341
1008 },
1009 {
1010 .compatible = "maxim,ds3231",
1011 .data = (void *)ds_3231
1012 },
1013 {
1014 .compatible = "st,m41t0",
1015 .data = (void *)m41t0
1016 },
1017 {
1018 .compatible = "st,m41t00",
1019 .data = (void *)m41t00
1020 },
1021 {
1022 .compatible = "st,m41t11",
1023 .data = (void *)m41t11
1024 },
1025 {
1026 .compatible = "microchip,mcp7940x",
1027 .data = (void *)mcp794xx
1028 },
1029 {
1030 .compatible = "microchip,mcp7941x",
1031 .data = (void *)mcp794xx
1032 },
1033 {
1034 .compatible = "pericom,pt7c4338",
1035 .data = (void *)ds_1307
1036 },
1037 {
1038 .compatible = "epson,rx8025",
1039 .data = (void *)rx_8025
1040 },
1041 {
1042 .compatible = "isil,isl12057",
1043 .data = (void *)ds_1337
1044 },
1045 {
1046 .compatible = "epson,rx8130",
1047 .data = (void *)rx_8130
1048 },
1049 { }
1050};
1051MODULE_DEVICE_TABLE(of, ds1307_of_match);
1052#endif
1053
1054#ifdef CONFIG_ACPI
1055static const struct acpi_device_id ds1307_acpi_ids[] = {
1056 { .id = "DS1307", .driver_data = ds_1307 },
1057 { .id = "DS1308", .driver_data = ds_1308 },
1058 { .id = "DS1337", .driver_data = ds_1337 },
1059 { .id = "DS1338", .driver_data = ds_1338 },
1060 { .id = "DS1339", .driver_data = ds_1339 },
1061 { .id = "DS1388", .driver_data = ds_1388 },
1062 { .id = "DS1340", .driver_data = ds_1340 },
1063 { .id = "DS1341", .driver_data = ds_1341 },
1064 { .id = "DS3231", .driver_data = ds_3231 },
1065 { .id = "M41T0", .driver_data = m41t0 },
1066 { .id = "M41T00", .driver_data = m41t00 },
1067 { .id = "M41T11", .driver_data = m41t11 },
1068 { .id = "MCP7940X", .driver_data = mcp794xx },
1069 { .id = "MCP7941X", .driver_data = mcp794xx },
1070 { .id = "PT7C4338", .driver_data = ds_1307 },
1071 { .id = "RX8025", .driver_data = rx_8025 },
1072 { .id = "ISL12057", .driver_data = ds_1337 },
1073 { .id = "RX8130", .driver_data = rx_8130 },
1074 { }
1075};
1076MODULE_DEVICE_TABLE(acpi, ds1307_acpi_ids);
1077#endif
1078
1079/*
1080 * The ds1337 and ds1339 both have two alarms, but we only use the first
1081 * one (with a "seconds" field). For ds1337 we expect nINTA is our alarm
1082 * signal; ds1339 chips have only one alarm signal.
1083 */
1084static irqreturn_t ds1307_irq(int irq, void *dev_id)
1085{
1086 struct ds1307 *ds1307 = dev_id;
1087 struct mutex *lock = &ds1307->rtc->ops_lock;
1088 int stat, ret;
1089
1090 mutex_lock(lock);
1091 ret = regmap_read(ds1307->regmap, DS1337_REG_STATUS, &stat);
1092 if (ret)
1093 goto out;
1094
1095 if (stat & DS1337_BIT_A1I) {
1096 stat &= ~DS1337_BIT_A1I;
1097 regmap_write(ds1307->regmap, DS1337_REG_STATUS, stat);
1098
1099 ret = regmap_update_bits(ds1307->regmap, DS1337_REG_CONTROL,
1100 DS1337_BIT_A1IE, 0);
1101 if (ret)
1102 goto out;
1103
1104 rtc_update_irq(ds1307->rtc, 1, RTC_AF | RTC_IRQF);
1105 }
1106
1107out:
1108 mutex_unlock(lock);
1109
1110 return IRQ_HANDLED;
1111}
1112
1113/*----------------------------------------------------------------------*/
1114
1115static const struct rtc_class_ops ds13xx_rtc_ops = {
1116 .read_time = ds1307_get_time,
1117 .set_time = ds1307_set_time,
1118 .read_alarm = ds1337_read_alarm,
1119 .set_alarm = ds1337_set_alarm,
1120 .alarm_irq_enable = ds1307_alarm_irq_enable,
1121};
1122
1123static ssize_t frequency_test_store(struct device *dev,
1124 struct device_attribute *attr,
1125 const char *buf, size_t count)
1126{
1127 struct ds1307 *ds1307 = dev_get_drvdata(dev->parent);
1128 bool freq_test_en;
1129 int ret;
1130
1131 ret = kstrtobool(buf, &freq_test_en);
1132 if (ret) {
1133 dev_err(dev, "Failed to store RTC Frequency Test attribute\n");
1134 return ret;
1135 }
1136
1137 regmap_update_bits(ds1307->regmap, M41TXX_REG_CONTROL, M41TXX_BIT_FT,
1138 freq_test_en ? M41TXX_BIT_FT : 0);
1139
1140 return count;
1141}
1142
1143static ssize_t frequency_test_show(struct device *dev,
1144 struct device_attribute *attr,
1145 char *buf)
1146{
1147 struct ds1307 *ds1307 = dev_get_drvdata(dev->parent);
1148 unsigned int ctrl_reg;
1149
1150 regmap_read(ds1307->regmap, M41TXX_REG_CONTROL, &ctrl_reg);
1151
1152 return scnprintf(buf, PAGE_SIZE, (ctrl_reg & M41TXX_BIT_FT) ? "on\n" :
1153 "off\n");
1154}
1155
1156static DEVICE_ATTR_RW(frequency_test);
1157
1158static struct attribute *rtc_freq_test_attrs[] = {
1159 &dev_attr_frequency_test.attr,
1160 NULL,
1161};
1162
1163static const struct attribute_group rtc_freq_test_attr_group = {
1164 .attrs = rtc_freq_test_attrs,
1165};
1166
1167static int ds1307_add_frequency_test(struct ds1307 *ds1307)
1168{
1169 int err;
1170
1171 switch (ds1307->type) {
1172 case m41t0:
1173 case m41t00:
1174 case m41t11:
1175 err = rtc_add_group(ds1307->rtc, &rtc_freq_test_attr_group);
1176 if (err)
1177 return err;
1178 break;
1179 default:
1180 break;
1181 }
1182
1183 return 0;
1184}
1185
1186/*----------------------------------------------------------------------*/
1187
1188static int ds1307_nvram_read(void *priv, unsigned int offset, void *val,
1189 size_t bytes)
1190{
1191 struct ds1307 *ds1307 = priv;
1192 const struct chip_desc *chip = &chips[ds1307->type];
1193
1194 return regmap_bulk_read(ds1307->regmap, chip->nvram_offset + offset,
1195 val, bytes);
1196}
1197
1198static int ds1307_nvram_write(void *priv, unsigned int offset, void *val,
1199 size_t bytes)
1200{
1201 struct ds1307 *ds1307 = priv;
1202 const struct chip_desc *chip = &chips[ds1307->type];
1203
1204 return regmap_bulk_write(ds1307->regmap, chip->nvram_offset + offset,
1205 val, bytes);
1206}
1207
1208/*----------------------------------------------------------------------*/
1209
1210static u8 ds1307_trickle_init(struct ds1307 *ds1307,
1211 const struct chip_desc *chip)
1212{
1213 u32 ohms;
1214 bool diode = true;
1215
1216 if (!chip->do_trickle_setup)
1217 return 0;
1218
1219 if (device_property_read_u32(ds1307->dev, "trickle-resistor-ohms",
1220 &ohms))
1221 return 0;
1222
1223 if (device_property_read_bool(ds1307->dev, "trickle-diode-disable"))
1224 diode = false;
1225
1226 return chip->do_trickle_setup(ds1307, ohms, diode);
1227}
1228
1229/*----------------------------------------------------------------------*/
1230
1231#if IS_REACHABLE(CONFIG_HWMON)
1232
1233/*
1234 * Temperature sensor support for ds3231 devices.
1235 */
1236
1237#define DS3231_REG_TEMPERATURE 0x11
1238
1239/*
1240 * A user-initiated temperature conversion is not started by this function,
1241 * so the temperature is updated once every 64 seconds.
1242 */
1243static int ds3231_hwmon_read_temp(struct device *dev, s32 *mC)
1244{
1245 struct ds1307 *ds1307 = dev_get_drvdata(dev);
1246 u8 temp_buf[2];
1247 s16 temp;
1248 int ret;
1249
1250 ret = regmap_bulk_read(ds1307->regmap, DS3231_REG_TEMPERATURE,
1251 temp_buf, sizeof(temp_buf));
1252 if (ret)
1253 return ret;
1254 /*
1255 * Temperature is represented as a 10-bit code with a resolution of
1256 * 0.25 degree celsius and encoded in two's complement format.
1257 */
1258 temp = (temp_buf[0] << 8) | temp_buf[1];
1259 temp >>= 6;
1260 *mC = temp * 250;
1261
1262 return 0;
1263}
1264
1265static ssize_t ds3231_hwmon_show_temp(struct device *dev,
1266 struct device_attribute *attr, char *buf)
1267{
1268 int ret;
1269 s32 temp;
1270
1271 ret = ds3231_hwmon_read_temp(dev, &temp);
1272 if (ret)
1273 return ret;
1274
1275 return sprintf(buf, "%d\n", temp);
1276}
1277static SENSOR_DEVICE_ATTR(temp1_input, 0444, ds3231_hwmon_show_temp,
1278 NULL, 0);
1279
1280static struct attribute *ds3231_hwmon_attrs[] = {
1281 &sensor_dev_attr_temp1_input.dev_attr.attr,
1282 NULL,
1283};
1284ATTRIBUTE_GROUPS(ds3231_hwmon);
1285
1286static void ds1307_hwmon_register(struct ds1307 *ds1307)
1287{
1288 struct device *dev;
1289
1290 if (ds1307->type != ds_3231)
1291 return;
1292
1293 dev = devm_hwmon_device_register_with_groups(ds1307->dev, ds1307->name,
1294 ds1307,
1295 ds3231_hwmon_groups);
1296 if (IS_ERR(dev)) {
1297 dev_warn(ds1307->dev, "unable to register hwmon device %ld\n",
1298 PTR_ERR(dev));
1299 }
1300}
1301
1302#else
1303
1304static void ds1307_hwmon_register(struct ds1307 *ds1307)
1305{
1306}
1307
1308#endif /* CONFIG_RTC_DRV_DS1307_HWMON */
1309
1310/*----------------------------------------------------------------------*/
1311
1312/*
1313 * Square-wave output support for DS3231
1314 * Datasheet: https://datasheets.maximintegrated.com/en/ds/DS3231.pdf
1315 */
1316#ifdef CONFIG_COMMON_CLK
1317
1318enum {
1319 DS3231_CLK_SQW = 0,
1320 DS3231_CLK_32KHZ,
1321};
1322
1323#define clk_sqw_to_ds1307(clk) \
1324 container_of(clk, struct ds1307, clks[DS3231_CLK_SQW])
1325#define clk_32khz_to_ds1307(clk) \
1326 container_of(clk, struct ds1307, clks[DS3231_CLK_32KHZ])
1327
1328static int ds3231_clk_sqw_rates[] = {
1329 1,
1330 1024,
1331 4096,
1332 8192,
1333};
1334
1335static int ds1337_write_control(struct ds1307 *ds1307, u8 mask, u8 value)
1336{
1337 struct mutex *lock = &ds1307->rtc->ops_lock;
1338 int ret;
1339
1340 mutex_lock(lock);
1341 ret = regmap_update_bits(ds1307->regmap, DS1337_REG_CONTROL,
1342 mask, value);
1343 mutex_unlock(lock);
1344
1345 return ret;
1346}
1347
1348static unsigned long ds3231_clk_sqw_recalc_rate(struct clk_hw *hw,
1349 unsigned long parent_rate)
1350{
1351 struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
1352 int control, ret;
1353 int rate_sel = 0;
1354
1355 ret = regmap_read(ds1307->regmap, DS1337_REG_CONTROL, &control);
1356 if (ret)
1357 return ret;
1358 if (control & DS1337_BIT_RS1)
1359 rate_sel += 1;
1360 if (control & DS1337_BIT_RS2)
1361 rate_sel += 2;
1362
1363 return ds3231_clk_sqw_rates[rate_sel];
1364}
1365
1366static long ds3231_clk_sqw_round_rate(struct clk_hw *hw, unsigned long rate,
1367 unsigned long *prate)
1368{
1369 int i;
1370
1371 for (i = ARRAY_SIZE(ds3231_clk_sqw_rates) - 1; i >= 0; i--) {
1372 if (ds3231_clk_sqw_rates[i] <= rate)
1373 return ds3231_clk_sqw_rates[i];
1374 }
1375
1376 return 0;
1377}
1378
1379static int ds3231_clk_sqw_set_rate(struct clk_hw *hw, unsigned long rate,
1380 unsigned long parent_rate)
1381{
1382 struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
1383 int control = 0;
1384 int rate_sel;
1385
1386 for (rate_sel = 0; rate_sel < ARRAY_SIZE(ds3231_clk_sqw_rates);
1387 rate_sel++) {
1388 if (ds3231_clk_sqw_rates[rate_sel] == rate)
1389 break;
1390 }
1391
1392 if (rate_sel == ARRAY_SIZE(ds3231_clk_sqw_rates))
1393 return -EINVAL;
1394
1395 if (rate_sel & 1)
1396 control |= DS1337_BIT_RS1;
1397 if (rate_sel & 2)
1398 control |= DS1337_BIT_RS2;
1399
1400 return ds1337_write_control(ds1307, DS1337_BIT_RS1 | DS1337_BIT_RS2,
1401 control);
1402}
1403
1404static int ds3231_clk_sqw_prepare(struct clk_hw *hw)
1405{
1406 struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
1407
1408 return ds1337_write_control(ds1307, DS1337_BIT_INTCN, 0);
1409}
1410
1411static void ds3231_clk_sqw_unprepare(struct clk_hw *hw)
1412{
1413 struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
1414
1415 ds1337_write_control(ds1307, DS1337_BIT_INTCN, DS1337_BIT_INTCN);
1416}
1417
1418static int ds3231_clk_sqw_is_prepared(struct clk_hw *hw)
1419{
1420 struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
1421 int control, ret;
1422
1423 ret = regmap_read(ds1307->regmap, DS1337_REG_CONTROL, &control);
1424 if (ret)
1425 return ret;
1426
1427 return !(control & DS1337_BIT_INTCN);
1428}
1429
1430static const struct clk_ops ds3231_clk_sqw_ops = {
1431 .prepare = ds3231_clk_sqw_prepare,
1432 .unprepare = ds3231_clk_sqw_unprepare,
1433 .is_prepared = ds3231_clk_sqw_is_prepared,
1434 .recalc_rate = ds3231_clk_sqw_recalc_rate,
1435 .round_rate = ds3231_clk_sqw_round_rate,
1436 .set_rate = ds3231_clk_sqw_set_rate,
1437};
1438
1439static unsigned long ds3231_clk_32khz_recalc_rate(struct clk_hw *hw,
1440 unsigned long parent_rate)
1441{
1442 return 32768;
1443}
1444
1445static int ds3231_clk_32khz_control(struct ds1307 *ds1307, bool enable)
1446{
1447 struct mutex *lock = &ds1307->rtc->ops_lock;
1448 int ret;
1449
1450 mutex_lock(lock);
1451 ret = regmap_update_bits(ds1307->regmap, DS1337_REG_STATUS,
1452 DS3231_BIT_EN32KHZ,
1453 enable ? DS3231_BIT_EN32KHZ : 0);
1454 mutex_unlock(lock);
1455
1456 return ret;
1457}
1458
1459static int ds3231_clk_32khz_prepare(struct clk_hw *hw)
1460{
1461 struct ds1307 *ds1307 = clk_32khz_to_ds1307(hw);
1462
1463 return ds3231_clk_32khz_control(ds1307, true);
1464}
1465
1466static void ds3231_clk_32khz_unprepare(struct clk_hw *hw)
1467{
1468 struct ds1307 *ds1307 = clk_32khz_to_ds1307(hw);
1469
1470 ds3231_clk_32khz_control(ds1307, false);
1471}
1472
1473static int ds3231_clk_32khz_is_prepared(struct clk_hw *hw)
1474{
1475 struct ds1307 *ds1307 = clk_32khz_to_ds1307(hw);
1476 int status, ret;
1477
1478 ret = regmap_read(ds1307->regmap, DS1337_REG_STATUS, &status);
1479 if (ret)
1480 return ret;
1481
1482 return !!(status & DS3231_BIT_EN32KHZ);
1483}
1484
1485static const struct clk_ops ds3231_clk_32khz_ops = {
1486 .prepare = ds3231_clk_32khz_prepare,
1487 .unprepare = ds3231_clk_32khz_unprepare,
1488 .is_prepared = ds3231_clk_32khz_is_prepared,
1489 .recalc_rate = ds3231_clk_32khz_recalc_rate,
1490};
1491
1492static struct clk_init_data ds3231_clks_init[] = {
1493 [DS3231_CLK_SQW] = {
1494 .name = "ds3231_clk_sqw",
1495 .ops = &ds3231_clk_sqw_ops,
1496 },
1497 [DS3231_CLK_32KHZ] = {
1498 .name = "ds3231_clk_32khz",
1499 .ops = &ds3231_clk_32khz_ops,
1500 },
1501};
1502
1503static int ds3231_clks_register(struct ds1307 *ds1307)
1504{
1505 struct device_node *node = ds1307->dev->of_node;
1506 struct clk_onecell_data *onecell;
1507 int i;
1508
1509 onecell = devm_kzalloc(ds1307->dev, sizeof(*onecell), GFP_KERNEL);
1510 if (!onecell)
1511 return -ENOMEM;
1512
1513 onecell->clk_num = ARRAY_SIZE(ds3231_clks_init);
1514 onecell->clks = devm_kcalloc(ds1307->dev, onecell->clk_num,
1515 sizeof(onecell->clks[0]), GFP_KERNEL);
1516 if (!onecell->clks)
1517 return -ENOMEM;
1518
1519 for (i = 0; i < ARRAY_SIZE(ds3231_clks_init); i++) {
1520 struct clk_init_data init = ds3231_clks_init[i];
1521
1522 /*
1523 * Interrupt signal due to alarm conditions and square-wave
1524 * output share same pin, so don't initialize both.
1525 */
1526 if (i == DS3231_CLK_SQW && test_bit(HAS_ALARM, &ds1307->flags))
1527 continue;
1528
1529 /* optional override of the clockname */
1530 of_property_read_string_index(node, "clock-output-names", i,
1531 &init.name);
1532 ds1307->clks[i].init = &init;
1533
1534 onecell->clks[i] = devm_clk_register(ds1307->dev,
1535 &ds1307->clks[i]);
1536 if (IS_ERR(onecell->clks[i]))
1537 return PTR_ERR(onecell->clks[i]);
1538 }
1539
1540 if (!node)
1541 return 0;
1542
1543 of_clk_add_provider(node, of_clk_src_onecell_get, onecell);
1544
1545 return 0;
1546}
1547
1548static void ds1307_clks_register(struct ds1307 *ds1307)
1549{
1550 int ret;
1551
1552 if (ds1307->type != ds_3231)
1553 return;
1554
1555 ret = ds3231_clks_register(ds1307);
1556 if (ret) {
1557 dev_warn(ds1307->dev, "unable to register clock device %d\n",
1558 ret);
1559 }
1560}
1561
1562#else
1563
1564static void ds1307_clks_register(struct ds1307 *ds1307)
1565{
1566}
1567
1568#endif /* CONFIG_COMMON_CLK */
1569
1570static const struct regmap_config regmap_config = {
1571 .reg_bits = 8,
1572 .val_bits = 8,
1573};
1574
1575static int ds1307_probe(struct i2c_client *client,
1576 const struct i2c_device_id *id)
1577{
1578 struct ds1307 *ds1307;
1579 int err = -ENODEV;
1580 int tmp;
1581 const struct chip_desc *chip;
1582 bool want_irq;
1583 bool ds1307_can_wakeup_device = false;
1584 unsigned char regs[8];
1585 struct ds1307_platform_data *pdata = dev_get_platdata(&client->dev);
1586 u8 trickle_charger_setup = 0;
1587
1588 ds1307 = devm_kzalloc(&client->dev, sizeof(struct ds1307), GFP_KERNEL);
1589 if (!ds1307)
1590 return -ENOMEM;
1591
1592 dev_set_drvdata(&client->dev, ds1307);
1593 ds1307->dev = &client->dev;
1594 ds1307->name = client->name;
1595
1596 ds1307->regmap = devm_regmap_init_i2c(client, ®map_config);
1597 if (IS_ERR(ds1307->regmap)) {
1598 dev_err(ds1307->dev, "regmap allocation failed\n");
1599 return PTR_ERR(ds1307->regmap);
1600 }
1601
1602 i2c_set_clientdata(client, ds1307);
1603
1604 if (client->dev.of_node) {
1605 ds1307->type = (enum ds_type)
1606 of_device_get_match_data(&client->dev);
1607 chip = &chips[ds1307->type];
1608 } else if (id) {
1609 chip = &chips[id->driver_data];
1610 ds1307->type = id->driver_data;
1611 } else {
1612 const struct acpi_device_id *acpi_id;
1613
1614 acpi_id = acpi_match_device(ACPI_PTR(ds1307_acpi_ids),
1615 ds1307->dev);
1616 if (!acpi_id)
1617 return -ENODEV;
1618 chip = &chips[acpi_id->driver_data];
1619 ds1307->type = acpi_id->driver_data;
1620 }
1621
1622 want_irq = client->irq > 0 && chip->alarm;
1623
1624 if (!pdata)
1625 trickle_charger_setup = ds1307_trickle_init(ds1307, chip);
1626 else if (pdata->trickle_charger_setup)
1627 trickle_charger_setup = pdata->trickle_charger_setup;
1628
1629 if (trickle_charger_setup && chip->trickle_charger_reg) {
1630 trickle_charger_setup |= DS13XX_TRICKLE_CHARGER_MAGIC;
1631 dev_dbg(ds1307->dev,
1632 "writing trickle charger info 0x%x to 0x%x\n",
1633 trickle_charger_setup, chip->trickle_charger_reg);
1634 regmap_write(ds1307->regmap, chip->trickle_charger_reg,
1635 trickle_charger_setup);
1636 }
1637
1638#ifdef CONFIG_OF
1639/*
1640 * For devices with no IRQ directly connected to the SoC, the RTC chip
1641 * can be forced as a wakeup source by stating that explicitly in
1642 * the device's .dts file using the "wakeup-source" boolean property.
1643 * If the "wakeup-source" property is set, don't request an IRQ.
1644 * This will guarantee the 'wakealarm' sysfs entry is available on the device,
1645 * if supported by the RTC.
1646 */
1647 if (chip->alarm && of_property_read_bool(client->dev.of_node,
1648 "wakeup-source"))
1649 ds1307_can_wakeup_device = true;
1650#endif
1651
1652 switch (ds1307->type) {
1653 case ds_1337:
1654 case ds_1339:
1655 case ds_1341:
1656 case ds_3231:
1657 /* get registers that the "rtc" read below won't read... */
1658 err = regmap_bulk_read(ds1307->regmap, DS1337_REG_CONTROL,
1659 regs, 2);
1660 if (err) {
1661 dev_dbg(ds1307->dev, "read error %d\n", err);
1662 goto exit;
1663 }
1664
1665 /* oscillator off? turn it on, so clock can tick. */
1666 if (regs[0] & DS1337_BIT_nEOSC)
1667 regs[0] &= ~DS1337_BIT_nEOSC;
1668
1669 /*
1670 * Using IRQ or defined as wakeup-source?
1671 * Disable the square wave and both alarms.
1672 * For some variants, be sure alarms can trigger when we're
1673 * running on Vbackup (BBSQI/BBSQW)
1674 */
1675 if (want_irq || ds1307_can_wakeup_device) {
1676 regs[0] |= DS1337_BIT_INTCN | chip->bbsqi_bit;
1677 regs[0] &= ~(DS1337_BIT_A2IE | DS1337_BIT_A1IE);
1678 }
1679
1680 regmap_write(ds1307->regmap, DS1337_REG_CONTROL,
1681 regs[0]);
1682
1683 /* oscillator fault? clear flag, and warn */
1684 if (regs[1] & DS1337_BIT_OSF) {
1685 regmap_write(ds1307->regmap, DS1337_REG_STATUS,
1686 regs[1] & ~DS1337_BIT_OSF);
1687 dev_warn(ds1307->dev, "SET TIME!\n");
1688 }
1689 break;
1690
1691 case rx_8025:
1692 err = regmap_bulk_read(ds1307->regmap,
1693 RX8025_REG_CTRL1 << 4 | 0x08, regs, 2);
1694 if (err) {
1695 dev_dbg(ds1307->dev, "read error %d\n", err);
1696 goto exit;
1697 }
1698
1699 /* oscillator off? turn it on, so clock can tick. */
1700 if (!(regs[1] & RX8025_BIT_XST)) {
1701 regs[1] |= RX8025_BIT_XST;
1702 regmap_write(ds1307->regmap,
1703 RX8025_REG_CTRL2 << 4 | 0x08,
1704 regs[1]);
1705 dev_warn(ds1307->dev,
1706 "oscillator stop detected - SET TIME!\n");
1707 }
1708
1709 if (regs[1] & RX8025_BIT_PON) {
1710 regs[1] &= ~RX8025_BIT_PON;
1711 regmap_write(ds1307->regmap,
1712 RX8025_REG_CTRL2 << 4 | 0x08,
1713 regs[1]);
1714 dev_warn(ds1307->dev, "power-on detected\n");
1715 }
1716
1717 if (regs[1] & RX8025_BIT_VDET) {
1718 regs[1] &= ~RX8025_BIT_VDET;
1719 regmap_write(ds1307->regmap,
1720 RX8025_REG_CTRL2 << 4 | 0x08,
1721 regs[1]);
1722 dev_warn(ds1307->dev, "voltage drop detected\n");
1723 }
1724
1725 /* make sure we are running in 24hour mode */
1726 if (!(regs[0] & RX8025_BIT_2412)) {
1727 u8 hour;
1728
1729 /* switch to 24 hour mode */
1730 regmap_write(ds1307->regmap,
1731 RX8025_REG_CTRL1 << 4 | 0x08,
1732 regs[0] | RX8025_BIT_2412);
1733
1734 err = regmap_bulk_read(ds1307->regmap,
1735 RX8025_REG_CTRL1 << 4 | 0x08,
1736 regs, 2);
1737 if (err) {
1738 dev_dbg(ds1307->dev, "read error %d\n", err);
1739 goto exit;
1740 }
1741
1742 /* correct hour */
1743 hour = bcd2bin(regs[DS1307_REG_HOUR]);
1744 if (hour == 12)
1745 hour = 0;
1746 if (regs[DS1307_REG_HOUR] & DS1307_BIT_PM)
1747 hour += 12;
1748
1749 regmap_write(ds1307->regmap,
1750 DS1307_REG_HOUR << 4 | 0x08, hour);
1751 }
1752 break;
1753 default:
1754 break;
1755 }
1756
1757 /* read RTC registers */
1758 err = regmap_bulk_read(ds1307->regmap, chip->offset, regs,
1759 sizeof(regs));
1760 if (err) {
1761 dev_dbg(ds1307->dev, "read error %d\n", err);
1762 goto exit;
1763 }
1764
1765 if (ds1307->type == mcp794xx &&
1766 !(regs[DS1307_REG_WDAY] & MCP794XX_BIT_VBATEN)) {
1767 regmap_write(ds1307->regmap, DS1307_REG_WDAY,
1768 regs[DS1307_REG_WDAY] |
1769 MCP794XX_BIT_VBATEN);
1770 }
1771
1772 tmp = regs[DS1307_REG_HOUR];
1773 switch (ds1307->type) {
1774 case ds_1340:
1775 case m41t0:
1776 case m41t00:
1777 case m41t11:
1778 /*
1779 * NOTE: ignores century bits; fix before deploying
1780 * systems that will run through year 2100.
1781 */
1782 break;
1783 case rx_8025:
1784 break;
1785 default:
1786 if (!(tmp & DS1307_BIT_12HR))
1787 break;
1788
1789 /*
1790 * Be sure we're in 24 hour mode. Multi-master systems
1791 * take note...
1792 */
1793 tmp = bcd2bin(tmp & 0x1f);
1794 if (tmp == 12)
1795 tmp = 0;
1796 if (regs[DS1307_REG_HOUR] & DS1307_BIT_PM)
1797 tmp += 12;
1798 regmap_write(ds1307->regmap, chip->offset + DS1307_REG_HOUR,
1799 bin2bcd(tmp));
1800 }
1801
1802 if (want_irq || ds1307_can_wakeup_device) {
1803 device_set_wakeup_capable(ds1307->dev, true);
1804 set_bit(HAS_ALARM, &ds1307->flags);
1805 }
1806
1807 ds1307->rtc = devm_rtc_allocate_device(ds1307->dev);
1808 if (IS_ERR(ds1307->rtc))
1809 return PTR_ERR(ds1307->rtc);
1810
1811 if (ds1307_can_wakeup_device && !want_irq) {
1812 dev_info(ds1307->dev,
1813 "'wakeup-source' is set, request for an IRQ is disabled!\n");
1814 /* We cannot support UIE mode if we do not have an IRQ line */
1815 ds1307->rtc->uie_unsupported = 1;
1816 }
1817
1818 if (want_irq) {
1819 err = devm_request_threaded_irq(ds1307->dev, client->irq, NULL,
1820 chip->irq_handler ?: ds1307_irq,
1821 IRQF_SHARED | IRQF_ONESHOT,
1822 ds1307->name, ds1307);
1823 if (err) {
1824 client->irq = 0;
1825 device_set_wakeup_capable(ds1307->dev, false);
1826 clear_bit(HAS_ALARM, &ds1307->flags);
1827 dev_err(ds1307->dev, "unable to request IRQ!\n");
1828 } else {
1829 dev_dbg(ds1307->dev, "got IRQ %d\n", client->irq);
1830 }
1831 }
1832
1833 ds1307->rtc->ops = chip->rtc_ops ?: &ds13xx_rtc_ops;
1834 err = ds1307_add_frequency_test(ds1307);
1835 if (err)
1836 return err;
1837
1838 err = rtc_register_device(ds1307->rtc);
1839 if (err)
1840 return err;
1841
1842 if (chip->nvram_size) {
1843 struct nvmem_config nvmem_cfg = {
1844 .name = "ds1307_nvram",
1845 .word_size = 1,
1846 .stride = 1,
1847 .size = chip->nvram_size,
1848 .reg_read = ds1307_nvram_read,
1849 .reg_write = ds1307_nvram_write,
1850 .priv = ds1307,
1851 };
1852
1853 ds1307->rtc->nvram_old_abi = true;
1854 rtc_nvmem_register(ds1307->rtc, &nvmem_cfg);
1855 }
1856
1857 ds1307_hwmon_register(ds1307);
1858 ds1307_clks_register(ds1307);
1859
1860 return 0;
1861
1862exit:
1863 return err;
1864}
1865
1866static struct i2c_driver ds1307_driver = {
1867 .driver = {
1868 .name = "rtc-ds1307",
1869 .of_match_table = of_match_ptr(ds1307_of_match),
1870 .acpi_match_table = ACPI_PTR(ds1307_acpi_ids),
1871 },
1872 .probe = ds1307_probe,
1873 .id_table = ds1307_id,
1874};
1875
1876module_i2c_driver(ds1307_driver);
1877
1878MODULE_DESCRIPTION("RTC driver for DS1307 and similar chips");
1879MODULE_LICENSE("GPL");