Loading...
1/*
2 * rtc-ds1307.c - RTC driver for some mostly-compatible I2C chips.
3 *
4 * Copyright (C) 2005 James Chapman (ds1337 core)
5 * Copyright (C) 2006 David Brownell
6 * Copyright (C) 2009 Matthias Fuchs (rx8025 support)
7 * Copyright (C) 2012 Bertrand Achard (nvram access fixes)
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12 */
13
14#include <linux/bcd.h>
15#include <linux/i2c.h>
16#include <linux/init.h>
17#include <linux/module.h>
18#include <linux/rtc/ds1307.h>
19#include <linux/rtc.h>
20#include <linux/slab.h>
21#include <linux/string.h>
22#include <linux/hwmon.h>
23#include <linux/hwmon-sysfs.h>
24#include <linux/clk-provider.h>
25
26/*
27 * We can't determine type by probing, but if we expect pre-Linux code
28 * to have set the chip up as a clock (turning on the oscillator and
29 * setting the date and time), Linux can ignore the non-clock features.
30 * That's a natural job for a factory or repair bench.
31 */
32enum ds_type {
33 ds_1307,
34 ds_1337,
35 ds_1338,
36 ds_1339,
37 ds_1340,
38 ds_1388,
39 ds_3231,
40 m41t00,
41 mcp794xx,
42 rx_8025,
43 last_ds_type /* always last */
44 /* rs5c372 too? different address... */
45};
46
47
48/* RTC registers don't differ much, except for the century flag */
49#define DS1307_REG_SECS 0x00 /* 00-59 */
50# define DS1307_BIT_CH 0x80
51# define DS1340_BIT_nEOSC 0x80
52# define MCP794XX_BIT_ST 0x80
53#define DS1307_REG_MIN 0x01 /* 00-59 */
54#define DS1307_REG_HOUR 0x02 /* 00-23, or 1-12{am,pm} */
55# define DS1307_BIT_12HR 0x40 /* in REG_HOUR */
56# define DS1307_BIT_PM 0x20 /* in REG_HOUR */
57# define DS1340_BIT_CENTURY_EN 0x80 /* in REG_HOUR */
58# define DS1340_BIT_CENTURY 0x40 /* in REG_HOUR */
59#define DS1307_REG_WDAY 0x03 /* 01-07 */
60# define MCP794XX_BIT_VBATEN 0x08
61#define DS1307_REG_MDAY 0x04 /* 01-31 */
62#define DS1307_REG_MONTH 0x05 /* 01-12 */
63# define DS1337_BIT_CENTURY 0x80 /* in REG_MONTH */
64#define DS1307_REG_YEAR 0x06 /* 00-99 */
65
66/*
67 * Other registers (control, status, alarms, trickle charge, NVRAM, etc)
68 * start at 7, and they differ a LOT. Only control and status matter for
69 * basic RTC date and time functionality; be careful using them.
70 */
71#define DS1307_REG_CONTROL 0x07 /* or ds1338 */
72# define DS1307_BIT_OUT 0x80
73# define DS1338_BIT_OSF 0x20
74# define DS1307_BIT_SQWE 0x10
75# define DS1307_BIT_RS1 0x02
76# define DS1307_BIT_RS0 0x01
77#define DS1337_REG_CONTROL 0x0e
78# define DS1337_BIT_nEOSC 0x80
79# define DS1339_BIT_BBSQI 0x20
80# define DS3231_BIT_BBSQW 0x40 /* same as BBSQI */
81# define DS1337_BIT_RS2 0x10
82# define DS1337_BIT_RS1 0x08
83# define DS1337_BIT_INTCN 0x04
84# define DS1337_BIT_A2IE 0x02
85# define DS1337_BIT_A1IE 0x01
86#define DS1340_REG_CONTROL 0x07
87# define DS1340_BIT_OUT 0x80
88# define DS1340_BIT_FT 0x40
89# define DS1340_BIT_CALIB_SIGN 0x20
90# define DS1340_M_CALIBRATION 0x1f
91#define DS1340_REG_FLAG 0x09
92# define DS1340_BIT_OSF 0x80
93#define DS1337_REG_STATUS 0x0f
94# define DS1337_BIT_OSF 0x80
95# define DS3231_BIT_EN32KHZ 0x08
96# define DS1337_BIT_A2I 0x02
97# define DS1337_BIT_A1I 0x01
98#define DS1339_REG_ALARM1_SECS 0x07
99
100#define DS13XX_TRICKLE_CHARGER_MAGIC 0xa0
101
102#define RX8025_REG_CTRL1 0x0e
103# define RX8025_BIT_2412 0x20
104#define RX8025_REG_CTRL2 0x0f
105# define RX8025_BIT_PON 0x10
106# define RX8025_BIT_VDET 0x40
107# define RX8025_BIT_XST 0x20
108
109
110struct ds1307 {
111 u8 offset; /* register's offset */
112 u8 regs[11];
113 u16 nvram_offset;
114 struct bin_attribute *nvram;
115 enum ds_type type;
116 unsigned long flags;
117#define HAS_NVRAM 0 /* bit 0 == sysfs file active */
118#define HAS_ALARM 1 /* bit 1 == irq claimed */
119 struct i2c_client *client;
120 struct rtc_device *rtc;
121 s32 (*read_block_data)(const struct i2c_client *client, u8 command,
122 u8 length, u8 *values);
123 s32 (*write_block_data)(const struct i2c_client *client, u8 command,
124 u8 length, const u8 *values);
125#ifdef CONFIG_COMMON_CLK
126 struct clk_hw clks[2];
127#endif
128};
129
130struct chip_desc {
131 unsigned alarm:1;
132 u16 nvram_offset;
133 u16 nvram_size;
134 u16 trickle_charger_reg;
135 u8 trickle_charger_setup;
136 u8 (*do_trickle_setup)(struct i2c_client *, uint32_t, bool);
137};
138
139static u8 do_trickle_setup_ds1339(struct i2c_client *,
140 uint32_t ohms, bool diode);
141
142static struct chip_desc chips[last_ds_type] = {
143 [ds_1307] = {
144 .nvram_offset = 8,
145 .nvram_size = 56,
146 },
147 [ds_1337] = {
148 .alarm = 1,
149 },
150 [ds_1338] = {
151 .nvram_offset = 8,
152 .nvram_size = 56,
153 },
154 [ds_1339] = {
155 .alarm = 1,
156 .trickle_charger_reg = 0x10,
157 .do_trickle_setup = &do_trickle_setup_ds1339,
158 },
159 [ds_1340] = {
160 .trickle_charger_reg = 0x08,
161 },
162 [ds_1388] = {
163 .trickle_charger_reg = 0x0a,
164 },
165 [ds_3231] = {
166 .alarm = 1,
167 },
168 [mcp794xx] = {
169 .alarm = 1,
170 /* this is battery backed SRAM */
171 .nvram_offset = 0x20,
172 .nvram_size = 0x40,
173 },
174};
175
176static const struct i2c_device_id ds1307_id[] = {
177 { "ds1307", ds_1307 },
178 { "ds1337", ds_1337 },
179 { "ds1338", ds_1338 },
180 { "ds1339", ds_1339 },
181 { "ds1388", ds_1388 },
182 { "ds1340", ds_1340 },
183 { "ds3231", ds_3231 },
184 { "m41t00", m41t00 },
185 { "mcp7940x", mcp794xx },
186 { "mcp7941x", mcp794xx },
187 { "pt7c4338", ds_1307 },
188 { "rx8025", rx_8025 },
189 { }
190};
191MODULE_DEVICE_TABLE(i2c, ds1307_id);
192
193/*----------------------------------------------------------------------*/
194
195#define BLOCK_DATA_MAX_TRIES 10
196
197static s32 ds1307_read_block_data_once(const struct i2c_client *client,
198 u8 command, u8 length, u8 *values)
199{
200 s32 i, data;
201
202 for (i = 0; i < length; i++) {
203 data = i2c_smbus_read_byte_data(client, command + i);
204 if (data < 0)
205 return data;
206 values[i] = data;
207 }
208 return i;
209}
210
211static s32 ds1307_read_block_data(const struct i2c_client *client, u8 command,
212 u8 length, u8 *values)
213{
214 u8 oldvalues[255];
215 s32 ret;
216 int tries = 0;
217
218 dev_dbg(&client->dev, "ds1307_read_block_data (length=%d)\n", length);
219 ret = ds1307_read_block_data_once(client, command, length, values);
220 if (ret < 0)
221 return ret;
222 do {
223 if (++tries > BLOCK_DATA_MAX_TRIES) {
224 dev_err(&client->dev,
225 "ds1307_read_block_data failed\n");
226 return -EIO;
227 }
228 memcpy(oldvalues, values, length);
229 ret = ds1307_read_block_data_once(client, command, length,
230 values);
231 if (ret < 0)
232 return ret;
233 } while (memcmp(oldvalues, values, length));
234 return length;
235}
236
237static s32 ds1307_write_block_data(const struct i2c_client *client, u8 command,
238 u8 length, const u8 *values)
239{
240 u8 currvalues[255];
241 int tries = 0;
242
243 dev_dbg(&client->dev, "ds1307_write_block_data (length=%d)\n", length);
244 do {
245 s32 i, ret;
246
247 if (++tries > BLOCK_DATA_MAX_TRIES) {
248 dev_err(&client->dev,
249 "ds1307_write_block_data failed\n");
250 return -EIO;
251 }
252 for (i = 0; i < length; i++) {
253 ret = i2c_smbus_write_byte_data(client, command + i,
254 values[i]);
255 if (ret < 0)
256 return ret;
257 }
258 ret = ds1307_read_block_data_once(client, command, length,
259 currvalues);
260 if (ret < 0)
261 return ret;
262 } while (memcmp(currvalues, values, length));
263 return length;
264}
265
266/*----------------------------------------------------------------------*/
267
268/* These RTC devices are not designed to be connected to a SMbus adapter.
269 SMbus limits block operations length to 32 bytes, whereas it's not
270 limited on I2C buses. As a result, accesses may exceed 32 bytes;
271 in that case, split them into smaller blocks */
272
273static s32 ds1307_native_smbus_write_block_data(const struct i2c_client *client,
274 u8 command, u8 length, const u8 *values)
275{
276 u8 suboffset = 0;
277
278 if (length <= I2C_SMBUS_BLOCK_MAX)
279 return i2c_smbus_write_i2c_block_data(client,
280 command, length, values);
281
282 while (suboffset < length) {
283 s32 retval = i2c_smbus_write_i2c_block_data(client,
284 command + suboffset,
285 min(I2C_SMBUS_BLOCK_MAX, length - suboffset),
286 values + suboffset);
287 if (retval < 0)
288 return retval;
289
290 suboffset += I2C_SMBUS_BLOCK_MAX;
291 }
292 return length;
293}
294
295static s32 ds1307_native_smbus_read_block_data(const struct i2c_client *client,
296 u8 command, u8 length, u8 *values)
297{
298 u8 suboffset = 0;
299
300 if (length <= I2C_SMBUS_BLOCK_MAX)
301 return i2c_smbus_read_i2c_block_data(client,
302 command, length, values);
303
304 while (suboffset < length) {
305 s32 retval = i2c_smbus_read_i2c_block_data(client,
306 command + suboffset,
307 min(I2C_SMBUS_BLOCK_MAX, length - suboffset),
308 values + suboffset);
309 if (retval < 0)
310 return retval;
311
312 suboffset += I2C_SMBUS_BLOCK_MAX;
313 }
314 return length;
315}
316
317/*----------------------------------------------------------------------*/
318
319/*
320 * The ds1337 and ds1339 both have two alarms, but we only use the first
321 * one (with a "seconds" field). For ds1337 we expect nINTA is our alarm
322 * signal; ds1339 chips have only one alarm signal.
323 */
324static irqreturn_t ds1307_irq(int irq, void *dev_id)
325{
326 struct i2c_client *client = dev_id;
327 struct ds1307 *ds1307 = i2c_get_clientdata(client);
328 struct mutex *lock = &ds1307->rtc->ops_lock;
329 int stat, control;
330
331 mutex_lock(lock);
332 stat = i2c_smbus_read_byte_data(client, DS1337_REG_STATUS);
333 if (stat < 0)
334 goto out;
335
336 if (stat & DS1337_BIT_A1I) {
337 stat &= ~DS1337_BIT_A1I;
338 i2c_smbus_write_byte_data(client, DS1337_REG_STATUS, stat);
339
340 control = i2c_smbus_read_byte_data(client, DS1337_REG_CONTROL);
341 if (control < 0)
342 goto out;
343
344 control &= ~DS1337_BIT_A1IE;
345 i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL, control);
346
347 rtc_update_irq(ds1307->rtc, 1, RTC_AF | RTC_IRQF);
348 }
349
350out:
351 mutex_unlock(lock);
352
353 return IRQ_HANDLED;
354}
355
356/*----------------------------------------------------------------------*/
357
358static int ds1307_get_time(struct device *dev, struct rtc_time *t)
359{
360 struct ds1307 *ds1307 = dev_get_drvdata(dev);
361 int tmp;
362
363 /* read the RTC date and time registers all at once */
364 tmp = ds1307->read_block_data(ds1307->client,
365 ds1307->offset, 7, ds1307->regs);
366 if (tmp != 7) {
367 dev_err(dev, "%s error %d\n", "read", tmp);
368 return -EIO;
369 }
370
371 dev_dbg(dev, "%s: %7ph\n", "read", ds1307->regs);
372
373 t->tm_sec = bcd2bin(ds1307->regs[DS1307_REG_SECS] & 0x7f);
374 t->tm_min = bcd2bin(ds1307->regs[DS1307_REG_MIN] & 0x7f);
375 tmp = ds1307->regs[DS1307_REG_HOUR] & 0x3f;
376 t->tm_hour = bcd2bin(tmp);
377 t->tm_wday = bcd2bin(ds1307->regs[DS1307_REG_WDAY] & 0x07) - 1;
378 t->tm_mday = bcd2bin(ds1307->regs[DS1307_REG_MDAY] & 0x3f);
379 tmp = ds1307->regs[DS1307_REG_MONTH] & 0x1f;
380 t->tm_mon = bcd2bin(tmp) - 1;
381
382 /* assume 20YY not 19YY, and ignore DS1337_BIT_CENTURY */
383 t->tm_year = bcd2bin(ds1307->regs[DS1307_REG_YEAR]) + 100;
384
385 dev_dbg(dev, "%s secs=%d, mins=%d, "
386 "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
387 "read", t->tm_sec, t->tm_min,
388 t->tm_hour, t->tm_mday,
389 t->tm_mon, t->tm_year, t->tm_wday);
390
391 /* initial clock setting can be undefined */
392 return rtc_valid_tm(t);
393}
394
395static int ds1307_set_time(struct device *dev, struct rtc_time *t)
396{
397 struct ds1307 *ds1307 = dev_get_drvdata(dev);
398 int result;
399 int tmp;
400 u8 *buf = ds1307->regs;
401
402 dev_dbg(dev, "%s secs=%d, mins=%d, "
403 "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
404 "write", t->tm_sec, t->tm_min,
405 t->tm_hour, t->tm_mday,
406 t->tm_mon, t->tm_year, t->tm_wday);
407
408 buf[DS1307_REG_SECS] = bin2bcd(t->tm_sec);
409 buf[DS1307_REG_MIN] = bin2bcd(t->tm_min);
410 buf[DS1307_REG_HOUR] = bin2bcd(t->tm_hour);
411 buf[DS1307_REG_WDAY] = bin2bcd(t->tm_wday + 1);
412 buf[DS1307_REG_MDAY] = bin2bcd(t->tm_mday);
413 buf[DS1307_REG_MONTH] = bin2bcd(t->tm_mon + 1);
414
415 /* assume 20YY not 19YY */
416 tmp = t->tm_year - 100;
417 buf[DS1307_REG_YEAR] = bin2bcd(tmp);
418
419 switch (ds1307->type) {
420 case ds_1337:
421 case ds_1339:
422 case ds_3231:
423 buf[DS1307_REG_MONTH] |= DS1337_BIT_CENTURY;
424 break;
425 case ds_1340:
426 buf[DS1307_REG_HOUR] |= DS1340_BIT_CENTURY_EN
427 | DS1340_BIT_CENTURY;
428 break;
429 case mcp794xx:
430 /*
431 * these bits were cleared when preparing the date/time
432 * values and need to be set again before writing the
433 * buffer out to the device.
434 */
435 buf[DS1307_REG_SECS] |= MCP794XX_BIT_ST;
436 buf[DS1307_REG_WDAY] |= MCP794XX_BIT_VBATEN;
437 break;
438 default:
439 break;
440 }
441
442 dev_dbg(dev, "%s: %7ph\n", "write", buf);
443
444 result = ds1307->write_block_data(ds1307->client,
445 ds1307->offset, 7, buf);
446 if (result < 0) {
447 dev_err(dev, "%s error %d\n", "write", result);
448 return result;
449 }
450 return 0;
451}
452
453static int ds1337_read_alarm(struct device *dev, struct rtc_wkalrm *t)
454{
455 struct i2c_client *client = to_i2c_client(dev);
456 struct ds1307 *ds1307 = i2c_get_clientdata(client);
457 int ret;
458
459 if (!test_bit(HAS_ALARM, &ds1307->flags))
460 return -EINVAL;
461
462 /* read all ALARM1, ALARM2, and status registers at once */
463 ret = ds1307->read_block_data(client,
464 DS1339_REG_ALARM1_SECS, 9, ds1307->regs);
465 if (ret != 9) {
466 dev_err(dev, "%s error %d\n", "alarm read", ret);
467 return -EIO;
468 }
469
470 dev_dbg(dev, "%s: %4ph, %3ph, %2ph\n", "alarm read",
471 &ds1307->regs[0], &ds1307->regs[4], &ds1307->regs[7]);
472
473 /*
474 * report alarm time (ALARM1); assume 24 hour and day-of-month modes,
475 * and that all four fields are checked matches
476 */
477 t->time.tm_sec = bcd2bin(ds1307->regs[0] & 0x7f);
478 t->time.tm_min = bcd2bin(ds1307->regs[1] & 0x7f);
479 t->time.tm_hour = bcd2bin(ds1307->regs[2] & 0x3f);
480 t->time.tm_mday = bcd2bin(ds1307->regs[3] & 0x3f);
481 t->time.tm_mon = -1;
482 t->time.tm_year = -1;
483 t->time.tm_wday = -1;
484 t->time.tm_yday = -1;
485 t->time.tm_isdst = -1;
486
487 /* ... and status */
488 t->enabled = !!(ds1307->regs[7] & DS1337_BIT_A1IE);
489 t->pending = !!(ds1307->regs[8] & DS1337_BIT_A1I);
490
491 dev_dbg(dev, "%s secs=%d, mins=%d, "
492 "hours=%d, mday=%d, enabled=%d, pending=%d\n",
493 "alarm read", t->time.tm_sec, t->time.tm_min,
494 t->time.tm_hour, t->time.tm_mday,
495 t->enabled, t->pending);
496
497 return 0;
498}
499
500static int ds1337_set_alarm(struct device *dev, struct rtc_wkalrm *t)
501{
502 struct i2c_client *client = to_i2c_client(dev);
503 struct ds1307 *ds1307 = i2c_get_clientdata(client);
504 unsigned char *buf = ds1307->regs;
505 u8 control, status;
506 int ret;
507
508 if (!test_bit(HAS_ALARM, &ds1307->flags))
509 return -EINVAL;
510
511 dev_dbg(dev, "%s secs=%d, mins=%d, "
512 "hours=%d, mday=%d, enabled=%d, pending=%d\n",
513 "alarm set", t->time.tm_sec, t->time.tm_min,
514 t->time.tm_hour, t->time.tm_mday,
515 t->enabled, t->pending);
516
517 /* read current status of both alarms and the chip */
518 ret = ds1307->read_block_data(client,
519 DS1339_REG_ALARM1_SECS, 9, buf);
520 if (ret != 9) {
521 dev_err(dev, "%s error %d\n", "alarm write", ret);
522 return -EIO;
523 }
524 control = ds1307->regs[7];
525 status = ds1307->regs[8];
526
527 dev_dbg(dev, "%s: %4ph, %3ph, %02x %02x\n", "alarm set (old status)",
528 &ds1307->regs[0], &ds1307->regs[4], control, status);
529
530 /* set ALARM1, using 24 hour and day-of-month modes */
531 buf[0] = bin2bcd(t->time.tm_sec);
532 buf[1] = bin2bcd(t->time.tm_min);
533 buf[2] = bin2bcd(t->time.tm_hour);
534 buf[3] = bin2bcd(t->time.tm_mday);
535
536 /* set ALARM2 to non-garbage */
537 buf[4] = 0;
538 buf[5] = 0;
539 buf[6] = 0;
540
541 /* optionally enable ALARM1 */
542 buf[7] = control & ~(DS1337_BIT_A1IE | DS1337_BIT_A2IE);
543 if (t->enabled) {
544 dev_dbg(dev, "alarm IRQ armed\n");
545 buf[7] |= DS1337_BIT_A1IE; /* only ALARM1 is used */
546 }
547 buf[8] = status & ~(DS1337_BIT_A1I | DS1337_BIT_A2I);
548
549 ret = ds1307->write_block_data(client,
550 DS1339_REG_ALARM1_SECS, 9, buf);
551 if (ret < 0) {
552 dev_err(dev, "can't set alarm time\n");
553 return ret;
554 }
555
556 return 0;
557}
558
559static int ds1307_alarm_irq_enable(struct device *dev, unsigned int enabled)
560{
561 struct i2c_client *client = to_i2c_client(dev);
562 struct ds1307 *ds1307 = i2c_get_clientdata(client);
563 int ret;
564
565 if (!test_bit(HAS_ALARM, &ds1307->flags))
566 return -ENOTTY;
567
568 ret = i2c_smbus_read_byte_data(client, DS1337_REG_CONTROL);
569 if (ret < 0)
570 return ret;
571
572 if (enabled)
573 ret |= DS1337_BIT_A1IE;
574 else
575 ret &= ~DS1337_BIT_A1IE;
576
577 ret = i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL, ret);
578 if (ret < 0)
579 return ret;
580
581 return 0;
582}
583
584static const struct rtc_class_ops ds13xx_rtc_ops = {
585 .read_time = ds1307_get_time,
586 .set_time = ds1307_set_time,
587 .read_alarm = ds1337_read_alarm,
588 .set_alarm = ds1337_set_alarm,
589 .alarm_irq_enable = ds1307_alarm_irq_enable,
590};
591
592/*----------------------------------------------------------------------*/
593
594/*
595 * Alarm support for mcp794xx devices.
596 */
597
598#define MCP794XX_REG_CONTROL 0x07
599# define MCP794XX_BIT_ALM0_EN 0x10
600# define MCP794XX_BIT_ALM1_EN 0x20
601#define MCP794XX_REG_ALARM0_BASE 0x0a
602#define MCP794XX_REG_ALARM0_CTRL 0x0d
603#define MCP794XX_REG_ALARM1_BASE 0x11
604#define MCP794XX_REG_ALARM1_CTRL 0x14
605# define MCP794XX_BIT_ALMX_IF (1 << 3)
606# define MCP794XX_BIT_ALMX_C0 (1 << 4)
607# define MCP794XX_BIT_ALMX_C1 (1 << 5)
608# define MCP794XX_BIT_ALMX_C2 (1 << 6)
609# define MCP794XX_BIT_ALMX_POL (1 << 7)
610# define MCP794XX_MSK_ALMX_MATCH (MCP794XX_BIT_ALMX_C0 | \
611 MCP794XX_BIT_ALMX_C1 | \
612 MCP794XX_BIT_ALMX_C2)
613
614static irqreturn_t mcp794xx_irq(int irq, void *dev_id)
615{
616 struct i2c_client *client = dev_id;
617 struct ds1307 *ds1307 = i2c_get_clientdata(client);
618 struct mutex *lock = &ds1307->rtc->ops_lock;
619 int reg, ret;
620
621 mutex_lock(lock);
622
623 /* Check and clear alarm 0 interrupt flag. */
624 reg = i2c_smbus_read_byte_data(client, MCP794XX_REG_ALARM0_CTRL);
625 if (reg < 0)
626 goto out;
627 if (!(reg & MCP794XX_BIT_ALMX_IF))
628 goto out;
629 reg &= ~MCP794XX_BIT_ALMX_IF;
630 ret = i2c_smbus_write_byte_data(client, MCP794XX_REG_ALARM0_CTRL, reg);
631 if (ret < 0)
632 goto out;
633
634 /* Disable alarm 0. */
635 reg = i2c_smbus_read_byte_data(client, MCP794XX_REG_CONTROL);
636 if (reg < 0)
637 goto out;
638 reg &= ~MCP794XX_BIT_ALM0_EN;
639 ret = i2c_smbus_write_byte_data(client, MCP794XX_REG_CONTROL, reg);
640 if (ret < 0)
641 goto out;
642
643 rtc_update_irq(ds1307->rtc, 1, RTC_AF | RTC_IRQF);
644
645out:
646 mutex_unlock(lock);
647
648 return IRQ_HANDLED;
649}
650
651static int mcp794xx_read_alarm(struct device *dev, struct rtc_wkalrm *t)
652{
653 struct i2c_client *client = to_i2c_client(dev);
654 struct ds1307 *ds1307 = i2c_get_clientdata(client);
655 u8 *regs = ds1307->regs;
656 int ret;
657
658 if (!test_bit(HAS_ALARM, &ds1307->flags))
659 return -EINVAL;
660
661 /* Read control and alarm 0 registers. */
662 ret = ds1307->read_block_data(client, MCP794XX_REG_CONTROL, 10, regs);
663 if (ret < 0)
664 return ret;
665
666 t->enabled = !!(regs[0] & MCP794XX_BIT_ALM0_EN);
667
668 /* Report alarm 0 time assuming 24-hour and day-of-month modes. */
669 t->time.tm_sec = bcd2bin(ds1307->regs[3] & 0x7f);
670 t->time.tm_min = bcd2bin(ds1307->regs[4] & 0x7f);
671 t->time.tm_hour = bcd2bin(ds1307->regs[5] & 0x3f);
672 t->time.tm_wday = bcd2bin(ds1307->regs[6] & 0x7) - 1;
673 t->time.tm_mday = bcd2bin(ds1307->regs[7] & 0x3f);
674 t->time.tm_mon = bcd2bin(ds1307->regs[8] & 0x1f) - 1;
675 t->time.tm_year = -1;
676 t->time.tm_yday = -1;
677 t->time.tm_isdst = -1;
678
679 dev_dbg(dev, "%s, sec=%d min=%d hour=%d wday=%d mday=%d mon=%d "
680 "enabled=%d polarity=%d irq=%d match=%d\n", __func__,
681 t->time.tm_sec, t->time.tm_min, t->time.tm_hour,
682 t->time.tm_wday, t->time.tm_mday, t->time.tm_mon, t->enabled,
683 !!(ds1307->regs[6] & MCP794XX_BIT_ALMX_POL),
684 !!(ds1307->regs[6] & MCP794XX_BIT_ALMX_IF),
685 (ds1307->regs[6] & MCP794XX_MSK_ALMX_MATCH) >> 4);
686
687 return 0;
688}
689
690static int mcp794xx_set_alarm(struct device *dev, struct rtc_wkalrm *t)
691{
692 struct i2c_client *client = to_i2c_client(dev);
693 struct ds1307 *ds1307 = i2c_get_clientdata(client);
694 unsigned char *regs = ds1307->regs;
695 int ret;
696
697 if (!test_bit(HAS_ALARM, &ds1307->flags))
698 return -EINVAL;
699
700 dev_dbg(dev, "%s, sec=%d min=%d hour=%d wday=%d mday=%d mon=%d "
701 "enabled=%d pending=%d\n", __func__,
702 t->time.tm_sec, t->time.tm_min, t->time.tm_hour,
703 t->time.tm_wday, t->time.tm_mday, t->time.tm_mon,
704 t->enabled, t->pending);
705
706 /* Read control and alarm 0 registers. */
707 ret = ds1307->read_block_data(client, MCP794XX_REG_CONTROL, 10, regs);
708 if (ret < 0)
709 return ret;
710
711 /* Set alarm 0, using 24-hour and day-of-month modes. */
712 regs[3] = bin2bcd(t->time.tm_sec);
713 regs[4] = bin2bcd(t->time.tm_min);
714 regs[5] = bin2bcd(t->time.tm_hour);
715 regs[6] = bin2bcd(t->time.tm_wday + 1);
716 regs[7] = bin2bcd(t->time.tm_mday);
717 regs[8] = bin2bcd(t->time.tm_mon + 1);
718
719 /* Clear the alarm 0 interrupt flag. */
720 regs[6] &= ~MCP794XX_BIT_ALMX_IF;
721 /* Set alarm match: second, minute, hour, day, date, month. */
722 regs[6] |= MCP794XX_MSK_ALMX_MATCH;
723 /* Disable interrupt. We will not enable until completely programmed */
724 regs[0] &= ~MCP794XX_BIT_ALM0_EN;
725
726 ret = ds1307->write_block_data(client, MCP794XX_REG_CONTROL, 10, regs);
727 if (ret < 0)
728 return ret;
729
730 if (!t->enabled)
731 return 0;
732 regs[0] |= MCP794XX_BIT_ALM0_EN;
733 return i2c_smbus_write_byte_data(client, MCP794XX_REG_CONTROL, regs[0]);
734}
735
736static int mcp794xx_alarm_irq_enable(struct device *dev, unsigned int enabled)
737{
738 struct i2c_client *client = to_i2c_client(dev);
739 struct ds1307 *ds1307 = i2c_get_clientdata(client);
740 int reg;
741
742 if (!test_bit(HAS_ALARM, &ds1307->flags))
743 return -EINVAL;
744
745 reg = i2c_smbus_read_byte_data(client, MCP794XX_REG_CONTROL);
746 if (reg < 0)
747 return reg;
748
749 if (enabled)
750 reg |= MCP794XX_BIT_ALM0_EN;
751 else
752 reg &= ~MCP794XX_BIT_ALM0_EN;
753
754 return i2c_smbus_write_byte_data(client, MCP794XX_REG_CONTROL, reg);
755}
756
757static const struct rtc_class_ops mcp794xx_rtc_ops = {
758 .read_time = ds1307_get_time,
759 .set_time = ds1307_set_time,
760 .read_alarm = mcp794xx_read_alarm,
761 .set_alarm = mcp794xx_set_alarm,
762 .alarm_irq_enable = mcp794xx_alarm_irq_enable,
763};
764
765/*----------------------------------------------------------------------*/
766
767static ssize_t
768ds1307_nvram_read(struct file *filp, struct kobject *kobj,
769 struct bin_attribute *attr,
770 char *buf, loff_t off, size_t count)
771{
772 struct i2c_client *client;
773 struct ds1307 *ds1307;
774 int result;
775
776 client = kobj_to_i2c_client(kobj);
777 ds1307 = i2c_get_clientdata(client);
778
779 result = ds1307->read_block_data(client, ds1307->nvram_offset + off,
780 count, buf);
781 if (result < 0)
782 dev_err(&client->dev, "%s error %d\n", "nvram read", result);
783 return result;
784}
785
786static ssize_t
787ds1307_nvram_write(struct file *filp, struct kobject *kobj,
788 struct bin_attribute *attr,
789 char *buf, loff_t off, size_t count)
790{
791 struct i2c_client *client;
792 struct ds1307 *ds1307;
793 int result;
794
795 client = kobj_to_i2c_client(kobj);
796 ds1307 = i2c_get_clientdata(client);
797
798 result = ds1307->write_block_data(client, ds1307->nvram_offset + off,
799 count, buf);
800 if (result < 0) {
801 dev_err(&client->dev, "%s error %d\n", "nvram write", result);
802 return result;
803 }
804 return count;
805}
806
807
808/*----------------------------------------------------------------------*/
809
810static u8 do_trickle_setup_ds1339(struct i2c_client *client,
811 uint32_t ohms, bool diode)
812{
813 u8 setup = (diode) ? DS1307_TRICKLE_CHARGER_DIODE :
814 DS1307_TRICKLE_CHARGER_NO_DIODE;
815
816 switch (ohms) {
817 case 250:
818 setup |= DS1307_TRICKLE_CHARGER_250_OHM;
819 break;
820 case 2000:
821 setup |= DS1307_TRICKLE_CHARGER_2K_OHM;
822 break;
823 case 4000:
824 setup |= DS1307_TRICKLE_CHARGER_4K_OHM;
825 break;
826 default:
827 dev_warn(&client->dev,
828 "Unsupported ohm value %u in dt\n", ohms);
829 return 0;
830 }
831 return setup;
832}
833
834static void ds1307_trickle_of_init(struct i2c_client *client,
835 struct chip_desc *chip)
836{
837 uint32_t ohms = 0;
838 bool diode = true;
839
840 if (!chip->do_trickle_setup)
841 goto out;
842 if (of_property_read_u32(client->dev.of_node, "trickle-resistor-ohms" , &ohms))
843 goto out;
844 if (of_property_read_bool(client->dev.of_node, "trickle-diode-disable"))
845 diode = false;
846 chip->trickle_charger_setup = chip->do_trickle_setup(client,
847 ohms, diode);
848out:
849 return;
850}
851
852/*----------------------------------------------------------------------*/
853
854#ifdef CONFIG_RTC_DRV_DS1307_HWMON
855
856/*
857 * Temperature sensor support for ds3231 devices.
858 */
859
860#define DS3231_REG_TEMPERATURE 0x11
861
862/*
863 * A user-initiated temperature conversion is not started by this function,
864 * so the temperature is updated once every 64 seconds.
865 */
866static int ds3231_hwmon_read_temp(struct device *dev, s32 *mC)
867{
868 struct ds1307 *ds1307 = dev_get_drvdata(dev);
869 u8 temp_buf[2];
870 s16 temp;
871 int ret;
872
873 ret = ds1307->read_block_data(ds1307->client, DS3231_REG_TEMPERATURE,
874 sizeof(temp_buf), temp_buf);
875 if (ret < 0)
876 return ret;
877 if (ret != sizeof(temp_buf))
878 return -EIO;
879
880 /*
881 * Temperature is represented as a 10-bit code with a resolution of
882 * 0.25 degree celsius and encoded in two's complement format.
883 */
884 temp = (temp_buf[0] << 8) | temp_buf[1];
885 temp >>= 6;
886 *mC = temp * 250;
887
888 return 0;
889}
890
891static ssize_t ds3231_hwmon_show_temp(struct device *dev,
892 struct device_attribute *attr, char *buf)
893{
894 int ret;
895 s32 temp;
896
897 ret = ds3231_hwmon_read_temp(dev, &temp);
898 if (ret)
899 return ret;
900
901 return sprintf(buf, "%d\n", temp);
902}
903static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, ds3231_hwmon_show_temp,
904 NULL, 0);
905
906static struct attribute *ds3231_hwmon_attrs[] = {
907 &sensor_dev_attr_temp1_input.dev_attr.attr,
908 NULL,
909};
910ATTRIBUTE_GROUPS(ds3231_hwmon);
911
912static void ds1307_hwmon_register(struct ds1307 *ds1307)
913{
914 struct device *dev;
915
916 if (ds1307->type != ds_3231)
917 return;
918
919 dev = devm_hwmon_device_register_with_groups(&ds1307->client->dev,
920 ds1307->client->name,
921 ds1307, ds3231_hwmon_groups);
922 if (IS_ERR(dev)) {
923 dev_warn(&ds1307->client->dev,
924 "unable to register hwmon device %ld\n", PTR_ERR(dev));
925 }
926}
927
928#else
929
930static void ds1307_hwmon_register(struct ds1307 *ds1307)
931{
932}
933
934#endif /* CONFIG_RTC_DRV_DS1307_HWMON */
935
936/*----------------------------------------------------------------------*/
937
938/*
939 * Square-wave output support for DS3231
940 * Datasheet: https://datasheets.maximintegrated.com/en/ds/DS3231.pdf
941 */
942#ifdef CONFIG_COMMON_CLK
943
944enum {
945 DS3231_CLK_SQW = 0,
946 DS3231_CLK_32KHZ,
947};
948
949#define clk_sqw_to_ds1307(clk) \
950 container_of(clk, struct ds1307, clks[DS3231_CLK_SQW])
951#define clk_32khz_to_ds1307(clk) \
952 container_of(clk, struct ds1307, clks[DS3231_CLK_32KHZ])
953
954static int ds3231_clk_sqw_rates[] = {
955 1,
956 1024,
957 4096,
958 8192,
959};
960
961static int ds1337_write_control(struct ds1307 *ds1307, u8 mask, u8 value)
962{
963 struct i2c_client *client = ds1307->client;
964 struct mutex *lock = &ds1307->rtc->ops_lock;
965 int control;
966 int ret;
967
968 mutex_lock(lock);
969
970 control = i2c_smbus_read_byte_data(client, DS1337_REG_CONTROL);
971 if (control < 0) {
972 ret = control;
973 goto out;
974 }
975
976 control &= ~mask;
977 control |= value;
978
979 ret = i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL, control);
980out:
981 mutex_unlock(lock);
982
983 return ret;
984}
985
986static unsigned long ds3231_clk_sqw_recalc_rate(struct clk_hw *hw,
987 unsigned long parent_rate)
988{
989 struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
990 int control;
991 int rate_sel = 0;
992
993 control = i2c_smbus_read_byte_data(ds1307->client, DS1337_REG_CONTROL);
994 if (control < 0)
995 return control;
996 if (control & DS1337_BIT_RS1)
997 rate_sel += 1;
998 if (control & DS1337_BIT_RS2)
999 rate_sel += 2;
1000
1001 return ds3231_clk_sqw_rates[rate_sel];
1002}
1003
1004static long ds3231_clk_sqw_round_rate(struct clk_hw *hw, unsigned long rate,
1005 unsigned long *prate)
1006{
1007 int i;
1008
1009 for (i = ARRAY_SIZE(ds3231_clk_sqw_rates) - 1; i >= 0; i--) {
1010 if (ds3231_clk_sqw_rates[i] <= rate)
1011 return ds3231_clk_sqw_rates[i];
1012 }
1013
1014 return 0;
1015}
1016
1017static int ds3231_clk_sqw_set_rate(struct clk_hw *hw, unsigned long rate,
1018 unsigned long parent_rate)
1019{
1020 struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
1021 int control = 0;
1022 int rate_sel;
1023
1024 for (rate_sel = 0; rate_sel < ARRAY_SIZE(ds3231_clk_sqw_rates);
1025 rate_sel++) {
1026 if (ds3231_clk_sqw_rates[rate_sel] == rate)
1027 break;
1028 }
1029
1030 if (rate_sel == ARRAY_SIZE(ds3231_clk_sqw_rates))
1031 return -EINVAL;
1032
1033 if (rate_sel & 1)
1034 control |= DS1337_BIT_RS1;
1035 if (rate_sel & 2)
1036 control |= DS1337_BIT_RS2;
1037
1038 return ds1337_write_control(ds1307, DS1337_BIT_RS1 | DS1337_BIT_RS2,
1039 control);
1040}
1041
1042static int ds3231_clk_sqw_prepare(struct clk_hw *hw)
1043{
1044 struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
1045
1046 return ds1337_write_control(ds1307, DS1337_BIT_INTCN, 0);
1047}
1048
1049static void ds3231_clk_sqw_unprepare(struct clk_hw *hw)
1050{
1051 struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
1052
1053 ds1337_write_control(ds1307, DS1337_BIT_INTCN, DS1337_BIT_INTCN);
1054}
1055
1056static int ds3231_clk_sqw_is_prepared(struct clk_hw *hw)
1057{
1058 struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
1059 int control;
1060
1061 control = i2c_smbus_read_byte_data(ds1307->client, DS1337_REG_CONTROL);
1062 if (control < 0)
1063 return control;
1064
1065 return !(control & DS1337_BIT_INTCN);
1066}
1067
1068static const struct clk_ops ds3231_clk_sqw_ops = {
1069 .prepare = ds3231_clk_sqw_prepare,
1070 .unprepare = ds3231_clk_sqw_unprepare,
1071 .is_prepared = ds3231_clk_sqw_is_prepared,
1072 .recalc_rate = ds3231_clk_sqw_recalc_rate,
1073 .round_rate = ds3231_clk_sqw_round_rate,
1074 .set_rate = ds3231_clk_sqw_set_rate,
1075};
1076
1077static unsigned long ds3231_clk_32khz_recalc_rate(struct clk_hw *hw,
1078 unsigned long parent_rate)
1079{
1080 return 32768;
1081}
1082
1083static int ds3231_clk_32khz_control(struct ds1307 *ds1307, bool enable)
1084{
1085 struct i2c_client *client = ds1307->client;
1086 struct mutex *lock = &ds1307->rtc->ops_lock;
1087 int status;
1088 int ret;
1089
1090 mutex_lock(lock);
1091
1092 status = i2c_smbus_read_byte_data(client, DS1337_REG_STATUS);
1093 if (status < 0) {
1094 ret = status;
1095 goto out;
1096 }
1097
1098 if (enable)
1099 status |= DS3231_BIT_EN32KHZ;
1100 else
1101 status &= ~DS3231_BIT_EN32KHZ;
1102
1103 ret = i2c_smbus_write_byte_data(client, DS1337_REG_STATUS, status);
1104out:
1105 mutex_unlock(lock);
1106
1107 return ret;
1108}
1109
1110static int ds3231_clk_32khz_prepare(struct clk_hw *hw)
1111{
1112 struct ds1307 *ds1307 = clk_32khz_to_ds1307(hw);
1113
1114 return ds3231_clk_32khz_control(ds1307, true);
1115}
1116
1117static void ds3231_clk_32khz_unprepare(struct clk_hw *hw)
1118{
1119 struct ds1307 *ds1307 = clk_32khz_to_ds1307(hw);
1120
1121 ds3231_clk_32khz_control(ds1307, false);
1122}
1123
1124static int ds3231_clk_32khz_is_prepared(struct clk_hw *hw)
1125{
1126 struct ds1307 *ds1307 = clk_32khz_to_ds1307(hw);
1127 int status;
1128
1129 status = i2c_smbus_read_byte_data(ds1307->client, DS1337_REG_STATUS);
1130 if (status < 0)
1131 return status;
1132
1133 return !!(status & DS3231_BIT_EN32KHZ);
1134}
1135
1136static const struct clk_ops ds3231_clk_32khz_ops = {
1137 .prepare = ds3231_clk_32khz_prepare,
1138 .unprepare = ds3231_clk_32khz_unprepare,
1139 .is_prepared = ds3231_clk_32khz_is_prepared,
1140 .recalc_rate = ds3231_clk_32khz_recalc_rate,
1141};
1142
1143static struct clk_init_data ds3231_clks_init[] = {
1144 [DS3231_CLK_SQW] = {
1145 .name = "ds3231_clk_sqw",
1146 .ops = &ds3231_clk_sqw_ops,
1147 .flags = CLK_IS_ROOT,
1148 },
1149 [DS3231_CLK_32KHZ] = {
1150 .name = "ds3231_clk_32khz",
1151 .ops = &ds3231_clk_32khz_ops,
1152 .flags = CLK_IS_ROOT,
1153 },
1154};
1155
1156static int ds3231_clks_register(struct ds1307 *ds1307)
1157{
1158 struct i2c_client *client = ds1307->client;
1159 struct device_node *node = client->dev.of_node;
1160 struct clk_onecell_data *onecell;
1161 int i;
1162
1163 onecell = devm_kzalloc(&client->dev, sizeof(*onecell), GFP_KERNEL);
1164 if (!onecell)
1165 return -ENOMEM;
1166
1167 onecell->clk_num = ARRAY_SIZE(ds3231_clks_init);
1168 onecell->clks = devm_kcalloc(&client->dev, onecell->clk_num,
1169 sizeof(onecell->clks[0]), GFP_KERNEL);
1170 if (!onecell->clks)
1171 return -ENOMEM;
1172
1173 for (i = 0; i < ARRAY_SIZE(ds3231_clks_init); i++) {
1174 struct clk_init_data init = ds3231_clks_init[i];
1175
1176 /*
1177 * Interrupt signal due to alarm conditions and square-wave
1178 * output share same pin, so don't initialize both.
1179 */
1180 if (i == DS3231_CLK_SQW && test_bit(HAS_ALARM, &ds1307->flags))
1181 continue;
1182
1183 /* optional override of the clockname */
1184 of_property_read_string_index(node, "clock-output-names", i,
1185 &init.name);
1186 ds1307->clks[i].init = &init;
1187
1188 onecell->clks[i] = devm_clk_register(&client->dev,
1189 &ds1307->clks[i]);
1190 if (IS_ERR(onecell->clks[i]))
1191 return PTR_ERR(onecell->clks[i]);
1192 }
1193
1194 if (!node)
1195 return 0;
1196
1197 of_clk_add_provider(node, of_clk_src_onecell_get, onecell);
1198
1199 return 0;
1200}
1201
1202static void ds1307_clks_register(struct ds1307 *ds1307)
1203{
1204 int ret;
1205
1206 if (ds1307->type != ds_3231)
1207 return;
1208
1209 ret = ds3231_clks_register(ds1307);
1210 if (ret) {
1211 dev_warn(&ds1307->client->dev,
1212 "unable to register clock device %d\n", ret);
1213 }
1214}
1215
1216#else
1217
1218static void ds1307_clks_register(struct ds1307 *ds1307)
1219{
1220}
1221
1222#endif /* CONFIG_COMMON_CLK */
1223
1224static int ds1307_probe(struct i2c_client *client,
1225 const struct i2c_device_id *id)
1226{
1227 struct ds1307 *ds1307;
1228 int err = -ENODEV;
1229 int tmp;
1230 struct chip_desc *chip = &chips[id->driver_data];
1231 struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
1232 bool want_irq = false;
1233 bool ds1307_can_wakeup_device = false;
1234 unsigned char *buf;
1235 struct ds1307_platform_data *pdata = dev_get_platdata(&client->dev);
1236 irq_handler_t irq_handler = ds1307_irq;
1237
1238 static const int bbsqi_bitpos[] = {
1239 [ds_1337] = 0,
1240 [ds_1339] = DS1339_BIT_BBSQI,
1241 [ds_3231] = DS3231_BIT_BBSQW,
1242 };
1243 const struct rtc_class_ops *rtc_ops = &ds13xx_rtc_ops;
1244
1245 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)
1246 && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
1247 return -EIO;
1248
1249 ds1307 = devm_kzalloc(&client->dev, sizeof(struct ds1307), GFP_KERNEL);
1250 if (!ds1307)
1251 return -ENOMEM;
1252
1253 i2c_set_clientdata(client, ds1307);
1254
1255 ds1307->client = client;
1256 ds1307->type = id->driver_data;
1257
1258 if (!pdata && client->dev.of_node)
1259 ds1307_trickle_of_init(client, chip);
1260 else if (pdata && pdata->trickle_charger_setup)
1261 chip->trickle_charger_setup = pdata->trickle_charger_setup;
1262
1263 if (chip->trickle_charger_setup && chip->trickle_charger_reg) {
1264 dev_dbg(&client->dev, "writing trickle charger info 0x%x to 0x%x\n",
1265 DS13XX_TRICKLE_CHARGER_MAGIC | chip->trickle_charger_setup,
1266 chip->trickle_charger_reg);
1267 i2c_smbus_write_byte_data(client, chip->trickle_charger_reg,
1268 DS13XX_TRICKLE_CHARGER_MAGIC |
1269 chip->trickle_charger_setup);
1270 }
1271
1272 buf = ds1307->regs;
1273 if (i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) {
1274 ds1307->read_block_data = ds1307_native_smbus_read_block_data;
1275 ds1307->write_block_data = ds1307_native_smbus_write_block_data;
1276 } else {
1277 ds1307->read_block_data = ds1307_read_block_data;
1278 ds1307->write_block_data = ds1307_write_block_data;
1279 }
1280
1281#ifdef CONFIG_OF
1282/*
1283 * For devices with no IRQ directly connected to the SoC, the RTC chip
1284 * can be forced as a wakeup source by stating that explicitly in
1285 * the device's .dts file using the "wakeup-source" boolean property.
1286 * If the "wakeup-source" property is set, don't request an IRQ.
1287 * This will guarantee the 'wakealarm' sysfs entry is available on the device,
1288 * if supported by the RTC.
1289 */
1290 if (of_property_read_bool(client->dev.of_node, "wakeup-source")) {
1291 ds1307_can_wakeup_device = true;
1292 }
1293#endif
1294
1295 switch (ds1307->type) {
1296 case ds_1337:
1297 case ds_1339:
1298 case ds_3231:
1299 /* get registers that the "rtc" read below won't read... */
1300 tmp = ds1307->read_block_data(ds1307->client,
1301 DS1337_REG_CONTROL, 2, buf);
1302 if (tmp != 2) {
1303 dev_dbg(&client->dev, "read error %d\n", tmp);
1304 err = -EIO;
1305 goto exit;
1306 }
1307
1308 /* oscillator off? turn it on, so clock can tick. */
1309 if (ds1307->regs[0] & DS1337_BIT_nEOSC)
1310 ds1307->regs[0] &= ~DS1337_BIT_nEOSC;
1311
1312 /*
1313 * Using IRQ or defined as wakeup-source?
1314 * Disable the square wave and both alarms.
1315 * For some variants, be sure alarms can trigger when we're
1316 * running on Vbackup (BBSQI/BBSQW)
1317 */
1318 if (chip->alarm && (ds1307->client->irq > 0 ||
1319 ds1307_can_wakeup_device)) {
1320 ds1307->regs[0] |= DS1337_BIT_INTCN
1321 | bbsqi_bitpos[ds1307->type];
1322 ds1307->regs[0] &= ~(DS1337_BIT_A2IE | DS1337_BIT_A1IE);
1323
1324 want_irq = true;
1325 }
1326
1327 i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL,
1328 ds1307->regs[0]);
1329
1330 /* oscillator fault? clear flag, and warn */
1331 if (ds1307->regs[1] & DS1337_BIT_OSF) {
1332 i2c_smbus_write_byte_data(client, DS1337_REG_STATUS,
1333 ds1307->regs[1] & ~DS1337_BIT_OSF);
1334 dev_warn(&client->dev, "SET TIME!\n");
1335 }
1336 break;
1337
1338 case rx_8025:
1339 tmp = i2c_smbus_read_i2c_block_data(ds1307->client,
1340 RX8025_REG_CTRL1 << 4 | 0x08, 2, buf);
1341 if (tmp != 2) {
1342 dev_dbg(&client->dev, "read error %d\n", tmp);
1343 err = -EIO;
1344 goto exit;
1345 }
1346
1347 /* oscillator off? turn it on, so clock can tick. */
1348 if (!(ds1307->regs[1] & RX8025_BIT_XST)) {
1349 ds1307->regs[1] |= RX8025_BIT_XST;
1350 i2c_smbus_write_byte_data(client,
1351 RX8025_REG_CTRL2 << 4 | 0x08,
1352 ds1307->regs[1]);
1353 dev_warn(&client->dev,
1354 "oscillator stop detected - SET TIME!\n");
1355 }
1356
1357 if (ds1307->regs[1] & RX8025_BIT_PON) {
1358 ds1307->regs[1] &= ~RX8025_BIT_PON;
1359 i2c_smbus_write_byte_data(client,
1360 RX8025_REG_CTRL2 << 4 | 0x08,
1361 ds1307->regs[1]);
1362 dev_warn(&client->dev, "power-on detected\n");
1363 }
1364
1365 if (ds1307->regs[1] & RX8025_BIT_VDET) {
1366 ds1307->regs[1] &= ~RX8025_BIT_VDET;
1367 i2c_smbus_write_byte_data(client,
1368 RX8025_REG_CTRL2 << 4 | 0x08,
1369 ds1307->regs[1]);
1370 dev_warn(&client->dev, "voltage drop detected\n");
1371 }
1372
1373 /* make sure we are running in 24hour mode */
1374 if (!(ds1307->regs[0] & RX8025_BIT_2412)) {
1375 u8 hour;
1376
1377 /* switch to 24 hour mode */
1378 i2c_smbus_write_byte_data(client,
1379 RX8025_REG_CTRL1 << 4 | 0x08,
1380 ds1307->regs[0] |
1381 RX8025_BIT_2412);
1382
1383 tmp = i2c_smbus_read_i2c_block_data(ds1307->client,
1384 RX8025_REG_CTRL1 << 4 | 0x08, 2, buf);
1385 if (tmp != 2) {
1386 dev_dbg(&client->dev, "read error %d\n", tmp);
1387 err = -EIO;
1388 goto exit;
1389 }
1390
1391 /* correct hour */
1392 hour = bcd2bin(ds1307->regs[DS1307_REG_HOUR]);
1393 if (hour == 12)
1394 hour = 0;
1395 if (ds1307->regs[DS1307_REG_HOUR] & DS1307_BIT_PM)
1396 hour += 12;
1397
1398 i2c_smbus_write_byte_data(client,
1399 DS1307_REG_HOUR << 4 | 0x08,
1400 hour);
1401 }
1402 break;
1403 case ds_1388:
1404 ds1307->offset = 1; /* Seconds starts at 1 */
1405 break;
1406 case mcp794xx:
1407 rtc_ops = &mcp794xx_rtc_ops;
1408 if (ds1307->client->irq > 0 && chip->alarm) {
1409 irq_handler = mcp794xx_irq;
1410 want_irq = true;
1411 }
1412 break;
1413 default:
1414 break;
1415 }
1416
1417read_rtc:
1418 /* read RTC registers */
1419 tmp = ds1307->read_block_data(ds1307->client, ds1307->offset, 8, buf);
1420 if (tmp != 8) {
1421 dev_dbg(&client->dev, "read error %d\n", tmp);
1422 err = -EIO;
1423 goto exit;
1424 }
1425
1426 /*
1427 * minimal sanity checking; some chips (like DS1340) don't
1428 * specify the extra bits as must-be-zero, but there are
1429 * still a few values that are clearly out-of-range.
1430 */
1431 tmp = ds1307->regs[DS1307_REG_SECS];
1432 switch (ds1307->type) {
1433 case ds_1307:
1434 case m41t00:
1435 /* clock halted? turn it on, so clock can tick. */
1436 if (tmp & DS1307_BIT_CH) {
1437 i2c_smbus_write_byte_data(client, DS1307_REG_SECS, 0);
1438 dev_warn(&client->dev, "SET TIME!\n");
1439 goto read_rtc;
1440 }
1441 break;
1442 case ds_1338:
1443 /* clock halted? turn it on, so clock can tick. */
1444 if (tmp & DS1307_BIT_CH)
1445 i2c_smbus_write_byte_data(client, DS1307_REG_SECS, 0);
1446
1447 /* oscillator fault? clear flag, and warn */
1448 if (ds1307->regs[DS1307_REG_CONTROL] & DS1338_BIT_OSF) {
1449 i2c_smbus_write_byte_data(client, DS1307_REG_CONTROL,
1450 ds1307->regs[DS1307_REG_CONTROL]
1451 & ~DS1338_BIT_OSF);
1452 dev_warn(&client->dev, "SET TIME!\n");
1453 goto read_rtc;
1454 }
1455 break;
1456 case ds_1340:
1457 /* clock halted? turn it on, so clock can tick. */
1458 if (tmp & DS1340_BIT_nEOSC)
1459 i2c_smbus_write_byte_data(client, DS1307_REG_SECS, 0);
1460
1461 tmp = i2c_smbus_read_byte_data(client, DS1340_REG_FLAG);
1462 if (tmp < 0) {
1463 dev_dbg(&client->dev, "read error %d\n", tmp);
1464 err = -EIO;
1465 goto exit;
1466 }
1467
1468 /* oscillator fault? clear flag, and warn */
1469 if (tmp & DS1340_BIT_OSF) {
1470 i2c_smbus_write_byte_data(client, DS1340_REG_FLAG, 0);
1471 dev_warn(&client->dev, "SET TIME!\n");
1472 }
1473 break;
1474 case mcp794xx:
1475 /* make sure that the backup battery is enabled */
1476 if (!(ds1307->regs[DS1307_REG_WDAY] & MCP794XX_BIT_VBATEN)) {
1477 i2c_smbus_write_byte_data(client, DS1307_REG_WDAY,
1478 ds1307->regs[DS1307_REG_WDAY]
1479 | MCP794XX_BIT_VBATEN);
1480 }
1481
1482 /* clock halted? turn it on, so clock can tick. */
1483 if (!(tmp & MCP794XX_BIT_ST)) {
1484 i2c_smbus_write_byte_data(client, DS1307_REG_SECS,
1485 MCP794XX_BIT_ST);
1486 dev_warn(&client->dev, "SET TIME!\n");
1487 goto read_rtc;
1488 }
1489
1490 break;
1491 default:
1492 break;
1493 }
1494
1495 tmp = ds1307->regs[DS1307_REG_HOUR];
1496 switch (ds1307->type) {
1497 case ds_1340:
1498 case m41t00:
1499 /*
1500 * NOTE: ignores century bits; fix before deploying
1501 * systems that will run through year 2100.
1502 */
1503 break;
1504 case rx_8025:
1505 break;
1506 default:
1507 if (!(tmp & DS1307_BIT_12HR))
1508 break;
1509
1510 /*
1511 * Be sure we're in 24 hour mode. Multi-master systems
1512 * take note...
1513 */
1514 tmp = bcd2bin(tmp & 0x1f);
1515 if (tmp == 12)
1516 tmp = 0;
1517 if (ds1307->regs[DS1307_REG_HOUR] & DS1307_BIT_PM)
1518 tmp += 12;
1519 i2c_smbus_write_byte_data(client,
1520 ds1307->offset + DS1307_REG_HOUR,
1521 bin2bcd(tmp));
1522 }
1523
1524 if (want_irq) {
1525 device_set_wakeup_capable(&client->dev, true);
1526 set_bit(HAS_ALARM, &ds1307->flags);
1527 }
1528 ds1307->rtc = devm_rtc_device_register(&client->dev, client->name,
1529 rtc_ops, THIS_MODULE);
1530 if (IS_ERR(ds1307->rtc)) {
1531 return PTR_ERR(ds1307->rtc);
1532 }
1533
1534 if (ds1307_can_wakeup_device && ds1307->client->irq <= 0) {
1535 /* Disable request for an IRQ */
1536 want_irq = false;
1537 dev_info(&client->dev, "'wakeup-source' is set, request for an IRQ is disabled!\n");
1538 /* We cannot support UIE mode if we do not have an IRQ line */
1539 ds1307->rtc->uie_unsupported = 1;
1540 }
1541
1542 if (want_irq) {
1543 err = devm_request_threaded_irq(&client->dev,
1544 client->irq, NULL, irq_handler,
1545 IRQF_SHARED | IRQF_ONESHOT,
1546 ds1307->rtc->name, client);
1547 if (err) {
1548 client->irq = 0;
1549 device_set_wakeup_capable(&client->dev, false);
1550 clear_bit(HAS_ALARM, &ds1307->flags);
1551 dev_err(&client->dev, "unable to request IRQ!\n");
1552 } else
1553 dev_dbg(&client->dev, "got IRQ %d\n", client->irq);
1554 }
1555
1556 if (chip->nvram_size) {
1557
1558 ds1307->nvram = devm_kzalloc(&client->dev,
1559 sizeof(struct bin_attribute),
1560 GFP_KERNEL);
1561 if (!ds1307->nvram) {
1562 dev_err(&client->dev, "cannot allocate memory for nvram sysfs\n");
1563 } else {
1564
1565 ds1307->nvram->attr.name = "nvram";
1566 ds1307->nvram->attr.mode = S_IRUGO | S_IWUSR;
1567
1568 sysfs_bin_attr_init(ds1307->nvram);
1569
1570 ds1307->nvram->read = ds1307_nvram_read;
1571 ds1307->nvram->write = ds1307_nvram_write;
1572 ds1307->nvram->size = chip->nvram_size;
1573 ds1307->nvram_offset = chip->nvram_offset;
1574
1575 err = sysfs_create_bin_file(&client->dev.kobj,
1576 ds1307->nvram);
1577 if (err) {
1578 dev_err(&client->dev,
1579 "unable to create sysfs file: %s\n",
1580 ds1307->nvram->attr.name);
1581 } else {
1582 set_bit(HAS_NVRAM, &ds1307->flags);
1583 dev_info(&client->dev, "%zu bytes nvram\n",
1584 ds1307->nvram->size);
1585 }
1586 }
1587 }
1588
1589 ds1307_hwmon_register(ds1307);
1590 ds1307_clks_register(ds1307);
1591
1592 return 0;
1593
1594exit:
1595 return err;
1596}
1597
1598static int ds1307_remove(struct i2c_client *client)
1599{
1600 struct ds1307 *ds1307 = i2c_get_clientdata(client);
1601
1602 if (test_and_clear_bit(HAS_NVRAM, &ds1307->flags))
1603 sysfs_remove_bin_file(&client->dev.kobj, ds1307->nvram);
1604
1605 return 0;
1606}
1607
1608static struct i2c_driver ds1307_driver = {
1609 .driver = {
1610 .name = "rtc-ds1307",
1611 },
1612 .probe = ds1307_probe,
1613 .remove = ds1307_remove,
1614 .id_table = ds1307_id,
1615};
1616
1617module_i2c_driver(ds1307_driver);
1618
1619MODULE_DESCRIPTION("RTC driver for DS1307 and similar chips");
1620MODULE_LICENSE("GPL");
1/*
2 * rtc-ds1307.c - RTC driver for some mostly-compatible I2C chips.
3 *
4 * Copyright (C) 2005 James Chapman (ds1337 core)
5 * Copyright (C) 2006 David Brownell
6 * Copyright (C) 2009 Matthias Fuchs (rx8025 support)
7 * Copyright (C) 2012 Bertrand Achard (nvram access fixes)
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12 */
13
14#include <linux/acpi.h>
15#include <linux/bcd.h>
16#include <linux/i2c.h>
17#include <linux/init.h>
18#include <linux/module.h>
19#include <linux/rtc/ds1307.h>
20#include <linux/rtc.h>
21#include <linux/slab.h>
22#include <linux/string.h>
23#include <linux/hwmon.h>
24#include <linux/hwmon-sysfs.h>
25#include <linux/clk-provider.h>
26
27/*
28 * We can't determine type by probing, but if we expect pre-Linux code
29 * to have set the chip up as a clock (turning on the oscillator and
30 * setting the date and time), Linux can ignore the non-clock features.
31 * That's a natural job for a factory or repair bench.
32 */
33enum ds_type {
34 ds_1307,
35 ds_1337,
36 ds_1338,
37 ds_1339,
38 ds_1340,
39 ds_1388,
40 ds_3231,
41 m41t00,
42 mcp794xx,
43 rx_8025,
44 last_ds_type /* always last */
45 /* rs5c372 too? different address... */
46};
47
48
49/* RTC registers don't differ much, except for the century flag */
50#define DS1307_REG_SECS 0x00 /* 00-59 */
51# define DS1307_BIT_CH 0x80
52# define DS1340_BIT_nEOSC 0x80
53# define MCP794XX_BIT_ST 0x80
54#define DS1307_REG_MIN 0x01 /* 00-59 */
55#define DS1307_REG_HOUR 0x02 /* 00-23, or 1-12{am,pm} */
56# define DS1307_BIT_12HR 0x40 /* in REG_HOUR */
57# define DS1307_BIT_PM 0x20 /* in REG_HOUR */
58# define DS1340_BIT_CENTURY_EN 0x80 /* in REG_HOUR */
59# define DS1340_BIT_CENTURY 0x40 /* in REG_HOUR */
60#define DS1307_REG_WDAY 0x03 /* 01-07 */
61# define MCP794XX_BIT_VBATEN 0x08
62#define DS1307_REG_MDAY 0x04 /* 01-31 */
63#define DS1307_REG_MONTH 0x05 /* 01-12 */
64# define DS1337_BIT_CENTURY 0x80 /* in REG_MONTH */
65#define DS1307_REG_YEAR 0x06 /* 00-99 */
66
67/*
68 * Other registers (control, status, alarms, trickle charge, NVRAM, etc)
69 * start at 7, and they differ a LOT. Only control and status matter for
70 * basic RTC date and time functionality; be careful using them.
71 */
72#define DS1307_REG_CONTROL 0x07 /* or ds1338 */
73# define DS1307_BIT_OUT 0x80
74# define DS1338_BIT_OSF 0x20
75# define DS1307_BIT_SQWE 0x10
76# define DS1307_BIT_RS1 0x02
77# define DS1307_BIT_RS0 0x01
78#define DS1337_REG_CONTROL 0x0e
79# define DS1337_BIT_nEOSC 0x80
80# define DS1339_BIT_BBSQI 0x20
81# define DS3231_BIT_BBSQW 0x40 /* same as BBSQI */
82# define DS1337_BIT_RS2 0x10
83# define DS1337_BIT_RS1 0x08
84# define DS1337_BIT_INTCN 0x04
85# define DS1337_BIT_A2IE 0x02
86# define DS1337_BIT_A1IE 0x01
87#define DS1340_REG_CONTROL 0x07
88# define DS1340_BIT_OUT 0x80
89# define DS1340_BIT_FT 0x40
90# define DS1340_BIT_CALIB_SIGN 0x20
91# define DS1340_M_CALIBRATION 0x1f
92#define DS1340_REG_FLAG 0x09
93# define DS1340_BIT_OSF 0x80
94#define DS1337_REG_STATUS 0x0f
95# define DS1337_BIT_OSF 0x80
96# define DS3231_BIT_EN32KHZ 0x08
97# define DS1337_BIT_A2I 0x02
98# define DS1337_BIT_A1I 0x01
99#define DS1339_REG_ALARM1_SECS 0x07
100
101#define DS13XX_TRICKLE_CHARGER_MAGIC 0xa0
102
103#define RX8025_REG_CTRL1 0x0e
104# define RX8025_BIT_2412 0x20
105#define RX8025_REG_CTRL2 0x0f
106# define RX8025_BIT_PON 0x10
107# define RX8025_BIT_VDET 0x40
108# define RX8025_BIT_XST 0x20
109
110
111struct ds1307 {
112 u8 offset; /* register's offset */
113 u8 regs[11];
114 u16 nvram_offset;
115 struct bin_attribute *nvram;
116 enum ds_type type;
117 unsigned long flags;
118#define HAS_NVRAM 0 /* bit 0 == sysfs file active */
119#define HAS_ALARM 1 /* bit 1 == irq claimed */
120 struct i2c_client *client;
121 struct rtc_device *rtc;
122 s32 (*read_block_data)(const struct i2c_client *client, u8 command,
123 u8 length, u8 *values);
124 s32 (*write_block_data)(const struct i2c_client *client, u8 command,
125 u8 length, const u8 *values);
126#ifdef CONFIG_COMMON_CLK
127 struct clk_hw clks[2];
128#endif
129};
130
131struct chip_desc {
132 unsigned alarm:1;
133 u16 nvram_offset;
134 u16 nvram_size;
135 u16 trickle_charger_reg;
136 u8 trickle_charger_setup;
137 u8 (*do_trickle_setup)(struct i2c_client *, uint32_t, bool);
138};
139
140static u8 do_trickle_setup_ds1339(struct i2c_client *,
141 uint32_t ohms, bool diode);
142
143static struct chip_desc chips[last_ds_type] = {
144 [ds_1307] = {
145 .nvram_offset = 8,
146 .nvram_size = 56,
147 },
148 [ds_1337] = {
149 .alarm = 1,
150 },
151 [ds_1338] = {
152 .nvram_offset = 8,
153 .nvram_size = 56,
154 },
155 [ds_1339] = {
156 .alarm = 1,
157 .trickle_charger_reg = 0x10,
158 .do_trickle_setup = &do_trickle_setup_ds1339,
159 },
160 [ds_1340] = {
161 .trickle_charger_reg = 0x08,
162 },
163 [ds_1388] = {
164 .trickle_charger_reg = 0x0a,
165 },
166 [ds_3231] = {
167 .alarm = 1,
168 },
169 [mcp794xx] = {
170 .alarm = 1,
171 /* this is battery backed SRAM */
172 .nvram_offset = 0x20,
173 .nvram_size = 0x40,
174 },
175};
176
177static const struct i2c_device_id ds1307_id[] = {
178 { "ds1307", ds_1307 },
179 { "ds1337", ds_1337 },
180 { "ds1338", ds_1338 },
181 { "ds1339", ds_1339 },
182 { "ds1388", ds_1388 },
183 { "ds1340", ds_1340 },
184 { "ds3231", ds_3231 },
185 { "m41t00", m41t00 },
186 { "mcp7940x", mcp794xx },
187 { "mcp7941x", mcp794xx },
188 { "pt7c4338", ds_1307 },
189 { "rx8025", rx_8025 },
190 { "isl12057", ds_1337 },
191 { }
192};
193MODULE_DEVICE_TABLE(i2c, ds1307_id);
194
195#ifdef CONFIG_ACPI
196static const struct acpi_device_id ds1307_acpi_ids[] = {
197 { .id = "DS1307", .driver_data = ds_1307 },
198 { .id = "DS1337", .driver_data = ds_1337 },
199 { .id = "DS1338", .driver_data = ds_1338 },
200 { .id = "DS1339", .driver_data = ds_1339 },
201 { .id = "DS1388", .driver_data = ds_1388 },
202 { .id = "DS1340", .driver_data = ds_1340 },
203 { .id = "DS3231", .driver_data = ds_3231 },
204 { .id = "M41T00", .driver_data = m41t00 },
205 { .id = "MCP7940X", .driver_data = mcp794xx },
206 { .id = "MCP7941X", .driver_data = mcp794xx },
207 { .id = "PT7C4338", .driver_data = ds_1307 },
208 { .id = "RX8025", .driver_data = rx_8025 },
209 { .id = "ISL12057", .driver_data = ds_1337 },
210 { }
211};
212MODULE_DEVICE_TABLE(acpi, ds1307_acpi_ids);
213#endif
214
215/*----------------------------------------------------------------------*/
216
217#define BLOCK_DATA_MAX_TRIES 10
218
219static s32 ds1307_read_block_data_once(const struct i2c_client *client,
220 u8 command, u8 length, u8 *values)
221{
222 s32 i, data;
223
224 for (i = 0; i < length; i++) {
225 data = i2c_smbus_read_byte_data(client, command + i);
226 if (data < 0)
227 return data;
228 values[i] = data;
229 }
230 return i;
231}
232
233static s32 ds1307_read_block_data(const struct i2c_client *client, u8 command,
234 u8 length, u8 *values)
235{
236 u8 oldvalues[255];
237 s32 ret;
238 int tries = 0;
239
240 dev_dbg(&client->dev, "ds1307_read_block_data (length=%d)\n", length);
241 ret = ds1307_read_block_data_once(client, command, length, values);
242 if (ret < 0)
243 return ret;
244 do {
245 if (++tries > BLOCK_DATA_MAX_TRIES) {
246 dev_err(&client->dev,
247 "ds1307_read_block_data failed\n");
248 return -EIO;
249 }
250 memcpy(oldvalues, values, length);
251 ret = ds1307_read_block_data_once(client, command, length,
252 values);
253 if (ret < 0)
254 return ret;
255 } while (memcmp(oldvalues, values, length));
256 return length;
257}
258
259static s32 ds1307_write_block_data(const struct i2c_client *client, u8 command,
260 u8 length, const u8 *values)
261{
262 u8 currvalues[255];
263 int tries = 0;
264
265 dev_dbg(&client->dev, "ds1307_write_block_data (length=%d)\n", length);
266 do {
267 s32 i, ret;
268
269 if (++tries > BLOCK_DATA_MAX_TRIES) {
270 dev_err(&client->dev,
271 "ds1307_write_block_data failed\n");
272 return -EIO;
273 }
274 for (i = 0; i < length; i++) {
275 ret = i2c_smbus_write_byte_data(client, command + i,
276 values[i]);
277 if (ret < 0)
278 return ret;
279 }
280 ret = ds1307_read_block_data_once(client, command, length,
281 currvalues);
282 if (ret < 0)
283 return ret;
284 } while (memcmp(currvalues, values, length));
285 return length;
286}
287
288/*----------------------------------------------------------------------*/
289
290/* These RTC devices are not designed to be connected to a SMbus adapter.
291 SMbus limits block operations length to 32 bytes, whereas it's not
292 limited on I2C buses. As a result, accesses may exceed 32 bytes;
293 in that case, split them into smaller blocks */
294
295static s32 ds1307_native_smbus_write_block_data(const struct i2c_client *client,
296 u8 command, u8 length, const u8 *values)
297{
298 u8 suboffset = 0;
299
300 if (length <= I2C_SMBUS_BLOCK_MAX) {
301 s32 retval = i2c_smbus_write_i2c_block_data(client,
302 command, length, values);
303 if (retval < 0)
304 return retval;
305 return length;
306 }
307
308 while (suboffset < length) {
309 s32 retval = i2c_smbus_write_i2c_block_data(client,
310 command + suboffset,
311 min(I2C_SMBUS_BLOCK_MAX, length - suboffset),
312 values + suboffset);
313 if (retval < 0)
314 return retval;
315
316 suboffset += I2C_SMBUS_BLOCK_MAX;
317 }
318 return length;
319}
320
321static s32 ds1307_native_smbus_read_block_data(const struct i2c_client *client,
322 u8 command, u8 length, u8 *values)
323{
324 u8 suboffset = 0;
325
326 if (length <= I2C_SMBUS_BLOCK_MAX)
327 return i2c_smbus_read_i2c_block_data(client,
328 command, length, values);
329
330 while (suboffset < length) {
331 s32 retval = i2c_smbus_read_i2c_block_data(client,
332 command + suboffset,
333 min(I2C_SMBUS_BLOCK_MAX, length - suboffset),
334 values + suboffset);
335 if (retval < 0)
336 return retval;
337
338 suboffset += I2C_SMBUS_BLOCK_MAX;
339 }
340 return length;
341}
342
343/*----------------------------------------------------------------------*/
344
345/*
346 * The ds1337 and ds1339 both have two alarms, but we only use the first
347 * one (with a "seconds" field). For ds1337 we expect nINTA is our alarm
348 * signal; ds1339 chips have only one alarm signal.
349 */
350static irqreturn_t ds1307_irq(int irq, void *dev_id)
351{
352 struct i2c_client *client = dev_id;
353 struct ds1307 *ds1307 = i2c_get_clientdata(client);
354 struct mutex *lock = &ds1307->rtc->ops_lock;
355 int stat, control;
356
357 mutex_lock(lock);
358 stat = i2c_smbus_read_byte_data(client, DS1337_REG_STATUS);
359 if (stat < 0)
360 goto out;
361
362 if (stat & DS1337_BIT_A1I) {
363 stat &= ~DS1337_BIT_A1I;
364 i2c_smbus_write_byte_data(client, DS1337_REG_STATUS, stat);
365
366 control = i2c_smbus_read_byte_data(client, DS1337_REG_CONTROL);
367 if (control < 0)
368 goto out;
369
370 control &= ~DS1337_BIT_A1IE;
371 i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL, control);
372
373 rtc_update_irq(ds1307->rtc, 1, RTC_AF | RTC_IRQF);
374 }
375
376out:
377 mutex_unlock(lock);
378
379 return IRQ_HANDLED;
380}
381
382/*----------------------------------------------------------------------*/
383
384static int ds1307_get_time(struct device *dev, struct rtc_time *t)
385{
386 struct ds1307 *ds1307 = dev_get_drvdata(dev);
387 int tmp;
388
389 /* read the RTC date and time registers all at once */
390 tmp = ds1307->read_block_data(ds1307->client,
391 ds1307->offset, 7, ds1307->regs);
392 if (tmp != 7) {
393 dev_err(dev, "%s error %d\n", "read", tmp);
394 return -EIO;
395 }
396
397 dev_dbg(dev, "%s: %7ph\n", "read", ds1307->regs);
398
399 t->tm_sec = bcd2bin(ds1307->regs[DS1307_REG_SECS] & 0x7f);
400 t->tm_min = bcd2bin(ds1307->regs[DS1307_REG_MIN] & 0x7f);
401 tmp = ds1307->regs[DS1307_REG_HOUR] & 0x3f;
402 t->tm_hour = bcd2bin(tmp);
403 t->tm_wday = bcd2bin(ds1307->regs[DS1307_REG_WDAY] & 0x07) - 1;
404 t->tm_mday = bcd2bin(ds1307->regs[DS1307_REG_MDAY] & 0x3f);
405 tmp = ds1307->regs[DS1307_REG_MONTH] & 0x1f;
406 t->tm_mon = bcd2bin(tmp) - 1;
407 t->tm_year = bcd2bin(ds1307->regs[DS1307_REG_YEAR]) + 100;
408
409#ifdef CONFIG_RTC_DRV_DS1307_CENTURY
410 switch (ds1307->type) {
411 case ds_1337:
412 case ds_1339:
413 case ds_3231:
414 if (ds1307->regs[DS1307_REG_MONTH] & DS1337_BIT_CENTURY)
415 t->tm_year += 100;
416 break;
417 case ds_1340:
418 if (ds1307->regs[DS1307_REG_HOUR] & DS1340_BIT_CENTURY)
419 t->tm_year += 100;
420 break;
421 default:
422 break;
423 }
424#endif
425
426 dev_dbg(dev, "%s secs=%d, mins=%d, "
427 "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
428 "read", t->tm_sec, t->tm_min,
429 t->tm_hour, t->tm_mday,
430 t->tm_mon, t->tm_year, t->tm_wday);
431
432 /* initial clock setting can be undefined */
433 return rtc_valid_tm(t);
434}
435
436static int ds1307_set_time(struct device *dev, struct rtc_time *t)
437{
438 struct ds1307 *ds1307 = dev_get_drvdata(dev);
439 int result;
440 int tmp;
441 u8 *buf = ds1307->regs;
442
443 dev_dbg(dev, "%s secs=%d, mins=%d, "
444 "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
445 "write", t->tm_sec, t->tm_min,
446 t->tm_hour, t->tm_mday,
447 t->tm_mon, t->tm_year, t->tm_wday);
448
449#ifdef CONFIG_RTC_DRV_DS1307_CENTURY
450 if (t->tm_year < 100)
451 return -EINVAL;
452
453 switch (ds1307->type) {
454 case ds_1337:
455 case ds_1339:
456 case ds_3231:
457 case ds_1340:
458 if (t->tm_year > 299)
459 return -EINVAL;
460 default:
461 if (t->tm_year > 199)
462 return -EINVAL;
463 break;
464 }
465#else
466 if (t->tm_year < 100 || t->tm_year > 199)
467 return -EINVAL;
468#endif
469
470 buf[DS1307_REG_SECS] = bin2bcd(t->tm_sec);
471 buf[DS1307_REG_MIN] = bin2bcd(t->tm_min);
472 buf[DS1307_REG_HOUR] = bin2bcd(t->tm_hour);
473 buf[DS1307_REG_WDAY] = bin2bcd(t->tm_wday + 1);
474 buf[DS1307_REG_MDAY] = bin2bcd(t->tm_mday);
475 buf[DS1307_REG_MONTH] = bin2bcd(t->tm_mon + 1);
476
477 /* assume 20YY not 19YY */
478 tmp = t->tm_year - 100;
479 buf[DS1307_REG_YEAR] = bin2bcd(tmp);
480
481 switch (ds1307->type) {
482 case ds_1337:
483 case ds_1339:
484 case ds_3231:
485 if (t->tm_year > 199)
486 buf[DS1307_REG_MONTH] |= DS1337_BIT_CENTURY;
487 break;
488 case ds_1340:
489 buf[DS1307_REG_HOUR] |= DS1340_BIT_CENTURY_EN;
490 if (t->tm_year > 199)
491 buf[DS1307_REG_HOUR] |= DS1340_BIT_CENTURY;
492 break;
493 case mcp794xx:
494 /*
495 * these bits were cleared when preparing the date/time
496 * values and need to be set again before writing the
497 * buffer out to the device.
498 */
499 buf[DS1307_REG_SECS] |= MCP794XX_BIT_ST;
500 buf[DS1307_REG_WDAY] |= MCP794XX_BIT_VBATEN;
501 break;
502 default:
503 break;
504 }
505
506 dev_dbg(dev, "%s: %7ph\n", "write", buf);
507
508 result = ds1307->write_block_data(ds1307->client,
509 ds1307->offset, 7, buf);
510 if (result < 0) {
511 dev_err(dev, "%s error %d\n", "write", result);
512 return result;
513 }
514 return 0;
515}
516
517static int ds1337_read_alarm(struct device *dev, struct rtc_wkalrm *t)
518{
519 struct i2c_client *client = to_i2c_client(dev);
520 struct ds1307 *ds1307 = i2c_get_clientdata(client);
521 int ret;
522
523 if (!test_bit(HAS_ALARM, &ds1307->flags))
524 return -EINVAL;
525
526 /* read all ALARM1, ALARM2, and status registers at once */
527 ret = ds1307->read_block_data(client,
528 DS1339_REG_ALARM1_SECS, 9, ds1307->regs);
529 if (ret != 9) {
530 dev_err(dev, "%s error %d\n", "alarm read", ret);
531 return -EIO;
532 }
533
534 dev_dbg(dev, "%s: %4ph, %3ph, %2ph\n", "alarm read",
535 &ds1307->regs[0], &ds1307->regs[4], &ds1307->regs[7]);
536
537 /*
538 * report alarm time (ALARM1); assume 24 hour and day-of-month modes,
539 * and that all four fields are checked matches
540 */
541 t->time.tm_sec = bcd2bin(ds1307->regs[0] & 0x7f);
542 t->time.tm_min = bcd2bin(ds1307->regs[1] & 0x7f);
543 t->time.tm_hour = bcd2bin(ds1307->regs[2] & 0x3f);
544 t->time.tm_mday = bcd2bin(ds1307->regs[3] & 0x3f);
545
546 /* ... and status */
547 t->enabled = !!(ds1307->regs[7] & DS1337_BIT_A1IE);
548 t->pending = !!(ds1307->regs[8] & DS1337_BIT_A1I);
549
550 dev_dbg(dev, "%s secs=%d, mins=%d, "
551 "hours=%d, mday=%d, enabled=%d, pending=%d\n",
552 "alarm read", t->time.tm_sec, t->time.tm_min,
553 t->time.tm_hour, t->time.tm_mday,
554 t->enabled, t->pending);
555
556 return 0;
557}
558
559static int ds1337_set_alarm(struct device *dev, struct rtc_wkalrm *t)
560{
561 struct i2c_client *client = to_i2c_client(dev);
562 struct ds1307 *ds1307 = i2c_get_clientdata(client);
563 unsigned char *buf = ds1307->regs;
564 u8 control, status;
565 int ret;
566
567 if (!test_bit(HAS_ALARM, &ds1307->flags))
568 return -EINVAL;
569
570 dev_dbg(dev, "%s secs=%d, mins=%d, "
571 "hours=%d, mday=%d, enabled=%d, pending=%d\n",
572 "alarm set", t->time.tm_sec, t->time.tm_min,
573 t->time.tm_hour, t->time.tm_mday,
574 t->enabled, t->pending);
575
576 /* read current status of both alarms and the chip */
577 ret = ds1307->read_block_data(client,
578 DS1339_REG_ALARM1_SECS, 9, buf);
579 if (ret != 9) {
580 dev_err(dev, "%s error %d\n", "alarm write", ret);
581 return -EIO;
582 }
583 control = ds1307->regs[7];
584 status = ds1307->regs[8];
585
586 dev_dbg(dev, "%s: %4ph, %3ph, %02x %02x\n", "alarm set (old status)",
587 &ds1307->regs[0], &ds1307->regs[4], control, status);
588
589 /* set ALARM1, using 24 hour and day-of-month modes */
590 buf[0] = bin2bcd(t->time.tm_sec);
591 buf[1] = bin2bcd(t->time.tm_min);
592 buf[2] = bin2bcd(t->time.tm_hour);
593 buf[3] = bin2bcd(t->time.tm_mday);
594
595 /* set ALARM2 to non-garbage */
596 buf[4] = 0;
597 buf[5] = 0;
598 buf[6] = 0;
599
600 /* disable alarms */
601 buf[7] = control & ~(DS1337_BIT_A1IE | DS1337_BIT_A2IE);
602 buf[8] = status & ~(DS1337_BIT_A1I | DS1337_BIT_A2I);
603
604 ret = ds1307->write_block_data(client,
605 DS1339_REG_ALARM1_SECS, 9, buf);
606 if (ret < 0) {
607 dev_err(dev, "can't set alarm time\n");
608 return ret;
609 }
610
611 /* optionally enable ALARM1 */
612 if (t->enabled) {
613 dev_dbg(dev, "alarm IRQ armed\n");
614 buf[7] |= DS1337_BIT_A1IE; /* only ALARM1 is used */
615 i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL, buf[7]);
616 }
617
618 return 0;
619}
620
621static int ds1307_alarm_irq_enable(struct device *dev, unsigned int enabled)
622{
623 struct i2c_client *client = to_i2c_client(dev);
624 struct ds1307 *ds1307 = i2c_get_clientdata(client);
625 int ret;
626
627 if (!test_bit(HAS_ALARM, &ds1307->flags))
628 return -ENOTTY;
629
630 ret = i2c_smbus_read_byte_data(client, DS1337_REG_CONTROL);
631 if (ret < 0)
632 return ret;
633
634 if (enabled)
635 ret |= DS1337_BIT_A1IE;
636 else
637 ret &= ~DS1337_BIT_A1IE;
638
639 ret = i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL, ret);
640 if (ret < 0)
641 return ret;
642
643 return 0;
644}
645
646static const struct rtc_class_ops ds13xx_rtc_ops = {
647 .read_time = ds1307_get_time,
648 .set_time = ds1307_set_time,
649 .read_alarm = ds1337_read_alarm,
650 .set_alarm = ds1337_set_alarm,
651 .alarm_irq_enable = ds1307_alarm_irq_enable,
652};
653
654/*----------------------------------------------------------------------*/
655
656/*
657 * Alarm support for mcp794xx devices.
658 */
659
660#define MCP794XX_REG_WEEKDAY 0x3
661#define MCP794XX_REG_WEEKDAY_WDAY_MASK 0x7
662#define MCP794XX_REG_CONTROL 0x07
663# define MCP794XX_BIT_ALM0_EN 0x10
664# define MCP794XX_BIT_ALM1_EN 0x20
665#define MCP794XX_REG_ALARM0_BASE 0x0a
666#define MCP794XX_REG_ALARM0_CTRL 0x0d
667#define MCP794XX_REG_ALARM1_BASE 0x11
668#define MCP794XX_REG_ALARM1_CTRL 0x14
669# define MCP794XX_BIT_ALMX_IF (1 << 3)
670# define MCP794XX_BIT_ALMX_C0 (1 << 4)
671# define MCP794XX_BIT_ALMX_C1 (1 << 5)
672# define MCP794XX_BIT_ALMX_C2 (1 << 6)
673# define MCP794XX_BIT_ALMX_POL (1 << 7)
674# define MCP794XX_MSK_ALMX_MATCH (MCP794XX_BIT_ALMX_C0 | \
675 MCP794XX_BIT_ALMX_C1 | \
676 MCP794XX_BIT_ALMX_C2)
677
678static irqreturn_t mcp794xx_irq(int irq, void *dev_id)
679{
680 struct i2c_client *client = dev_id;
681 struct ds1307 *ds1307 = i2c_get_clientdata(client);
682 struct mutex *lock = &ds1307->rtc->ops_lock;
683 int reg, ret;
684
685 mutex_lock(lock);
686
687 /* Check and clear alarm 0 interrupt flag. */
688 reg = i2c_smbus_read_byte_data(client, MCP794XX_REG_ALARM0_CTRL);
689 if (reg < 0)
690 goto out;
691 if (!(reg & MCP794XX_BIT_ALMX_IF))
692 goto out;
693 reg &= ~MCP794XX_BIT_ALMX_IF;
694 ret = i2c_smbus_write_byte_data(client, MCP794XX_REG_ALARM0_CTRL, reg);
695 if (ret < 0)
696 goto out;
697
698 /* Disable alarm 0. */
699 reg = i2c_smbus_read_byte_data(client, MCP794XX_REG_CONTROL);
700 if (reg < 0)
701 goto out;
702 reg &= ~MCP794XX_BIT_ALM0_EN;
703 ret = i2c_smbus_write_byte_data(client, MCP794XX_REG_CONTROL, reg);
704 if (ret < 0)
705 goto out;
706
707 rtc_update_irq(ds1307->rtc, 1, RTC_AF | RTC_IRQF);
708
709out:
710 mutex_unlock(lock);
711
712 return IRQ_HANDLED;
713}
714
715static int mcp794xx_read_alarm(struct device *dev, struct rtc_wkalrm *t)
716{
717 struct i2c_client *client = to_i2c_client(dev);
718 struct ds1307 *ds1307 = i2c_get_clientdata(client);
719 u8 *regs = ds1307->regs;
720 int ret;
721
722 if (!test_bit(HAS_ALARM, &ds1307->flags))
723 return -EINVAL;
724
725 /* Read control and alarm 0 registers. */
726 ret = ds1307->read_block_data(client, MCP794XX_REG_CONTROL, 10, regs);
727 if (ret < 0)
728 return ret;
729
730 t->enabled = !!(regs[0] & MCP794XX_BIT_ALM0_EN);
731
732 /* Report alarm 0 time assuming 24-hour and day-of-month modes. */
733 t->time.tm_sec = bcd2bin(ds1307->regs[3] & 0x7f);
734 t->time.tm_min = bcd2bin(ds1307->regs[4] & 0x7f);
735 t->time.tm_hour = bcd2bin(ds1307->regs[5] & 0x3f);
736 t->time.tm_wday = bcd2bin(ds1307->regs[6] & 0x7) - 1;
737 t->time.tm_mday = bcd2bin(ds1307->regs[7] & 0x3f);
738 t->time.tm_mon = bcd2bin(ds1307->regs[8] & 0x1f) - 1;
739 t->time.tm_year = -1;
740 t->time.tm_yday = -1;
741 t->time.tm_isdst = -1;
742
743 dev_dbg(dev, "%s, sec=%d min=%d hour=%d wday=%d mday=%d mon=%d "
744 "enabled=%d polarity=%d irq=%d match=%d\n", __func__,
745 t->time.tm_sec, t->time.tm_min, t->time.tm_hour,
746 t->time.tm_wday, t->time.tm_mday, t->time.tm_mon, t->enabled,
747 !!(ds1307->regs[6] & MCP794XX_BIT_ALMX_POL),
748 !!(ds1307->regs[6] & MCP794XX_BIT_ALMX_IF),
749 (ds1307->regs[6] & MCP794XX_MSK_ALMX_MATCH) >> 4);
750
751 return 0;
752}
753
754static int mcp794xx_set_alarm(struct device *dev, struct rtc_wkalrm *t)
755{
756 struct i2c_client *client = to_i2c_client(dev);
757 struct ds1307 *ds1307 = i2c_get_clientdata(client);
758 unsigned char *regs = ds1307->regs;
759 int ret;
760
761 if (!test_bit(HAS_ALARM, &ds1307->flags))
762 return -EINVAL;
763
764 dev_dbg(dev, "%s, sec=%d min=%d hour=%d wday=%d mday=%d mon=%d "
765 "enabled=%d pending=%d\n", __func__,
766 t->time.tm_sec, t->time.tm_min, t->time.tm_hour,
767 t->time.tm_wday, t->time.tm_mday, t->time.tm_mon,
768 t->enabled, t->pending);
769
770 /* Read control and alarm 0 registers. */
771 ret = ds1307->read_block_data(client, MCP794XX_REG_CONTROL, 10, regs);
772 if (ret < 0)
773 return ret;
774
775 /* Set alarm 0, using 24-hour and day-of-month modes. */
776 regs[3] = bin2bcd(t->time.tm_sec);
777 regs[4] = bin2bcd(t->time.tm_min);
778 regs[5] = bin2bcd(t->time.tm_hour);
779 regs[6] = bin2bcd(t->time.tm_wday + 1);
780 regs[7] = bin2bcd(t->time.tm_mday);
781 regs[8] = bin2bcd(t->time.tm_mon + 1);
782
783 /* Clear the alarm 0 interrupt flag. */
784 regs[6] &= ~MCP794XX_BIT_ALMX_IF;
785 /* Set alarm match: second, minute, hour, day, date, month. */
786 regs[6] |= MCP794XX_MSK_ALMX_MATCH;
787 /* Disable interrupt. We will not enable until completely programmed */
788 regs[0] &= ~MCP794XX_BIT_ALM0_EN;
789
790 ret = ds1307->write_block_data(client, MCP794XX_REG_CONTROL, 10, regs);
791 if (ret < 0)
792 return ret;
793
794 if (!t->enabled)
795 return 0;
796 regs[0] |= MCP794XX_BIT_ALM0_EN;
797 return i2c_smbus_write_byte_data(client, MCP794XX_REG_CONTROL, regs[0]);
798}
799
800static int mcp794xx_alarm_irq_enable(struct device *dev, unsigned int enabled)
801{
802 struct i2c_client *client = to_i2c_client(dev);
803 struct ds1307 *ds1307 = i2c_get_clientdata(client);
804 int reg;
805
806 if (!test_bit(HAS_ALARM, &ds1307->flags))
807 return -EINVAL;
808
809 reg = i2c_smbus_read_byte_data(client, MCP794XX_REG_CONTROL);
810 if (reg < 0)
811 return reg;
812
813 if (enabled)
814 reg |= MCP794XX_BIT_ALM0_EN;
815 else
816 reg &= ~MCP794XX_BIT_ALM0_EN;
817
818 return i2c_smbus_write_byte_data(client, MCP794XX_REG_CONTROL, reg);
819}
820
821static const struct rtc_class_ops mcp794xx_rtc_ops = {
822 .read_time = ds1307_get_time,
823 .set_time = ds1307_set_time,
824 .read_alarm = mcp794xx_read_alarm,
825 .set_alarm = mcp794xx_set_alarm,
826 .alarm_irq_enable = mcp794xx_alarm_irq_enable,
827};
828
829/*----------------------------------------------------------------------*/
830
831static ssize_t
832ds1307_nvram_read(struct file *filp, struct kobject *kobj,
833 struct bin_attribute *attr,
834 char *buf, loff_t off, size_t count)
835{
836 struct i2c_client *client;
837 struct ds1307 *ds1307;
838 int result;
839
840 client = kobj_to_i2c_client(kobj);
841 ds1307 = i2c_get_clientdata(client);
842
843 result = ds1307->read_block_data(client, ds1307->nvram_offset + off,
844 count, buf);
845 if (result < 0)
846 dev_err(&client->dev, "%s error %d\n", "nvram read", result);
847 return result;
848}
849
850static ssize_t
851ds1307_nvram_write(struct file *filp, struct kobject *kobj,
852 struct bin_attribute *attr,
853 char *buf, loff_t off, size_t count)
854{
855 struct i2c_client *client;
856 struct ds1307 *ds1307;
857 int result;
858
859 client = kobj_to_i2c_client(kobj);
860 ds1307 = i2c_get_clientdata(client);
861
862 result = ds1307->write_block_data(client, ds1307->nvram_offset + off,
863 count, buf);
864 if (result < 0) {
865 dev_err(&client->dev, "%s error %d\n", "nvram write", result);
866 return result;
867 }
868 return count;
869}
870
871
872/*----------------------------------------------------------------------*/
873
874static u8 do_trickle_setup_ds1339(struct i2c_client *client,
875 uint32_t ohms, bool diode)
876{
877 u8 setup = (diode) ? DS1307_TRICKLE_CHARGER_DIODE :
878 DS1307_TRICKLE_CHARGER_NO_DIODE;
879
880 switch (ohms) {
881 case 250:
882 setup |= DS1307_TRICKLE_CHARGER_250_OHM;
883 break;
884 case 2000:
885 setup |= DS1307_TRICKLE_CHARGER_2K_OHM;
886 break;
887 case 4000:
888 setup |= DS1307_TRICKLE_CHARGER_4K_OHM;
889 break;
890 default:
891 dev_warn(&client->dev,
892 "Unsupported ohm value %u in dt\n", ohms);
893 return 0;
894 }
895 return setup;
896}
897
898static void ds1307_trickle_init(struct i2c_client *client,
899 struct chip_desc *chip)
900{
901 uint32_t ohms = 0;
902 bool diode = true;
903
904 if (!chip->do_trickle_setup)
905 goto out;
906 if (device_property_read_u32(&client->dev, "trickle-resistor-ohms", &ohms))
907 goto out;
908 if (device_property_read_bool(&client->dev, "trickle-diode-disable"))
909 diode = false;
910 chip->trickle_charger_setup = chip->do_trickle_setup(client,
911 ohms, diode);
912out:
913 return;
914}
915
916/*----------------------------------------------------------------------*/
917
918#ifdef CONFIG_RTC_DRV_DS1307_HWMON
919
920/*
921 * Temperature sensor support for ds3231 devices.
922 */
923
924#define DS3231_REG_TEMPERATURE 0x11
925
926/*
927 * A user-initiated temperature conversion is not started by this function,
928 * so the temperature is updated once every 64 seconds.
929 */
930static int ds3231_hwmon_read_temp(struct device *dev, s32 *mC)
931{
932 struct ds1307 *ds1307 = dev_get_drvdata(dev);
933 u8 temp_buf[2];
934 s16 temp;
935 int ret;
936
937 ret = ds1307->read_block_data(ds1307->client, DS3231_REG_TEMPERATURE,
938 sizeof(temp_buf), temp_buf);
939 if (ret < 0)
940 return ret;
941 if (ret != sizeof(temp_buf))
942 return -EIO;
943
944 /*
945 * Temperature is represented as a 10-bit code with a resolution of
946 * 0.25 degree celsius and encoded in two's complement format.
947 */
948 temp = (temp_buf[0] << 8) | temp_buf[1];
949 temp >>= 6;
950 *mC = temp * 250;
951
952 return 0;
953}
954
955static ssize_t ds3231_hwmon_show_temp(struct device *dev,
956 struct device_attribute *attr, char *buf)
957{
958 int ret;
959 s32 temp;
960
961 ret = ds3231_hwmon_read_temp(dev, &temp);
962 if (ret)
963 return ret;
964
965 return sprintf(buf, "%d\n", temp);
966}
967static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, ds3231_hwmon_show_temp,
968 NULL, 0);
969
970static struct attribute *ds3231_hwmon_attrs[] = {
971 &sensor_dev_attr_temp1_input.dev_attr.attr,
972 NULL,
973};
974ATTRIBUTE_GROUPS(ds3231_hwmon);
975
976static void ds1307_hwmon_register(struct ds1307 *ds1307)
977{
978 struct device *dev;
979
980 if (ds1307->type != ds_3231)
981 return;
982
983 dev = devm_hwmon_device_register_with_groups(&ds1307->client->dev,
984 ds1307->client->name,
985 ds1307, ds3231_hwmon_groups);
986 if (IS_ERR(dev)) {
987 dev_warn(&ds1307->client->dev,
988 "unable to register hwmon device %ld\n", PTR_ERR(dev));
989 }
990}
991
992#else
993
994static void ds1307_hwmon_register(struct ds1307 *ds1307)
995{
996}
997
998#endif /* CONFIG_RTC_DRV_DS1307_HWMON */
999
1000/*----------------------------------------------------------------------*/
1001
1002/*
1003 * Square-wave output support for DS3231
1004 * Datasheet: https://datasheets.maximintegrated.com/en/ds/DS3231.pdf
1005 */
1006#ifdef CONFIG_COMMON_CLK
1007
1008enum {
1009 DS3231_CLK_SQW = 0,
1010 DS3231_CLK_32KHZ,
1011};
1012
1013#define clk_sqw_to_ds1307(clk) \
1014 container_of(clk, struct ds1307, clks[DS3231_CLK_SQW])
1015#define clk_32khz_to_ds1307(clk) \
1016 container_of(clk, struct ds1307, clks[DS3231_CLK_32KHZ])
1017
1018static int ds3231_clk_sqw_rates[] = {
1019 1,
1020 1024,
1021 4096,
1022 8192,
1023};
1024
1025static int ds1337_write_control(struct ds1307 *ds1307, u8 mask, u8 value)
1026{
1027 struct i2c_client *client = ds1307->client;
1028 struct mutex *lock = &ds1307->rtc->ops_lock;
1029 int control;
1030 int ret;
1031
1032 mutex_lock(lock);
1033
1034 control = i2c_smbus_read_byte_data(client, DS1337_REG_CONTROL);
1035 if (control < 0) {
1036 ret = control;
1037 goto out;
1038 }
1039
1040 control &= ~mask;
1041 control |= value;
1042
1043 ret = i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL, control);
1044out:
1045 mutex_unlock(lock);
1046
1047 return ret;
1048}
1049
1050static unsigned long ds3231_clk_sqw_recalc_rate(struct clk_hw *hw,
1051 unsigned long parent_rate)
1052{
1053 struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
1054 int control;
1055 int rate_sel = 0;
1056
1057 control = i2c_smbus_read_byte_data(ds1307->client, DS1337_REG_CONTROL);
1058 if (control < 0)
1059 return control;
1060 if (control & DS1337_BIT_RS1)
1061 rate_sel += 1;
1062 if (control & DS1337_BIT_RS2)
1063 rate_sel += 2;
1064
1065 return ds3231_clk_sqw_rates[rate_sel];
1066}
1067
1068static long ds3231_clk_sqw_round_rate(struct clk_hw *hw, unsigned long rate,
1069 unsigned long *prate)
1070{
1071 int i;
1072
1073 for (i = ARRAY_SIZE(ds3231_clk_sqw_rates) - 1; i >= 0; i--) {
1074 if (ds3231_clk_sqw_rates[i] <= rate)
1075 return ds3231_clk_sqw_rates[i];
1076 }
1077
1078 return 0;
1079}
1080
1081static int ds3231_clk_sqw_set_rate(struct clk_hw *hw, unsigned long rate,
1082 unsigned long parent_rate)
1083{
1084 struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
1085 int control = 0;
1086 int rate_sel;
1087
1088 for (rate_sel = 0; rate_sel < ARRAY_SIZE(ds3231_clk_sqw_rates);
1089 rate_sel++) {
1090 if (ds3231_clk_sqw_rates[rate_sel] == rate)
1091 break;
1092 }
1093
1094 if (rate_sel == ARRAY_SIZE(ds3231_clk_sqw_rates))
1095 return -EINVAL;
1096
1097 if (rate_sel & 1)
1098 control |= DS1337_BIT_RS1;
1099 if (rate_sel & 2)
1100 control |= DS1337_BIT_RS2;
1101
1102 return ds1337_write_control(ds1307, DS1337_BIT_RS1 | DS1337_BIT_RS2,
1103 control);
1104}
1105
1106static int ds3231_clk_sqw_prepare(struct clk_hw *hw)
1107{
1108 struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
1109
1110 return ds1337_write_control(ds1307, DS1337_BIT_INTCN, 0);
1111}
1112
1113static void ds3231_clk_sqw_unprepare(struct clk_hw *hw)
1114{
1115 struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
1116
1117 ds1337_write_control(ds1307, DS1337_BIT_INTCN, DS1337_BIT_INTCN);
1118}
1119
1120static int ds3231_clk_sqw_is_prepared(struct clk_hw *hw)
1121{
1122 struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
1123 int control;
1124
1125 control = i2c_smbus_read_byte_data(ds1307->client, DS1337_REG_CONTROL);
1126 if (control < 0)
1127 return control;
1128
1129 return !(control & DS1337_BIT_INTCN);
1130}
1131
1132static const struct clk_ops ds3231_clk_sqw_ops = {
1133 .prepare = ds3231_clk_sqw_prepare,
1134 .unprepare = ds3231_clk_sqw_unprepare,
1135 .is_prepared = ds3231_clk_sqw_is_prepared,
1136 .recalc_rate = ds3231_clk_sqw_recalc_rate,
1137 .round_rate = ds3231_clk_sqw_round_rate,
1138 .set_rate = ds3231_clk_sqw_set_rate,
1139};
1140
1141static unsigned long ds3231_clk_32khz_recalc_rate(struct clk_hw *hw,
1142 unsigned long parent_rate)
1143{
1144 return 32768;
1145}
1146
1147static int ds3231_clk_32khz_control(struct ds1307 *ds1307, bool enable)
1148{
1149 struct i2c_client *client = ds1307->client;
1150 struct mutex *lock = &ds1307->rtc->ops_lock;
1151 int status;
1152 int ret;
1153
1154 mutex_lock(lock);
1155
1156 status = i2c_smbus_read_byte_data(client, DS1337_REG_STATUS);
1157 if (status < 0) {
1158 ret = status;
1159 goto out;
1160 }
1161
1162 if (enable)
1163 status |= DS3231_BIT_EN32KHZ;
1164 else
1165 status &= ~DS3231_BIT_EN32KHZ;
1166
1167 ret = i2c_smbus_write_byte_data(client, DS1337_REG_STATUS, status);
1168out:
1169 mutex_unlock(lock);
1170
1171 return ret;
1172}
1173
1174static int ds3231_clk_32khz_prepare(struct clk_hw *hw)
1175{
1176 struct ds1307 *ds1307 = clk_32khz_to_ds1307(hw);
1177
1178 return ds3231_clk_32khz_control(ds1307, true);
1179}
1180
1181static void ds3231_clk_32khz_unprepare(struct clk_hw *hw)
1182{
1183 struct ds1307 *ds1307 = clk_32khz_to_ds1307(hw);
1184
1185 ds3231_clk_32khz_control(ds1307, false);
1186}
1187
1188static int ds3231_clk_32khz_is_prepared(struct clk_hw *hw)
1189{
1190 struct ds1307 *ds1307 = clk_32khz_to_ds1307(hw);
1191 int status;
1192
1193 status = i2c_smbus_read_byte_data(ds1307->client, DS1337_REG_STATUS);
1194 if (status < 0)
1195 return status;
1196
1197 return !!(status & DS3231_BIT_EN32KHZ);
1198}
1199
1200static const struct clk_ops ds3231_clk_32khz_ops = {
1201 .prepare = ds3231_clk_32khz_prepare,
1202 .unprepare = ds3231_clk_32khz_unprepare,
1203 .is_prepared = ds3231_clk_32khz_is_prepared,
1204 .recalc_rate = ds3231_clk_32khz_recalc_rate,
1205};
1206
1207static struct clk_init_data ds3231_clks_init[] = {
1208 [DS3231_CLK_SQW] = {
1209 .name = "ds3231_clk_sqw",
1210 .ops = &ds3231_clk_sqw_ops,
1211 },
1212 [DS3231_CLK_32KHZ] = {
1213 .name = "ds3231_clk_32khz",
1214 .ops = &ds3231_clk_32khz_ops,
1215 },
1216};
1217
1218static int ds3231_clks_register(struct ds1307 *ds1307)
1219{
1220 struct i2c_client *client = ds1307->client;
1221 struct device_node *node = client->dev.of_node;
1222 struct clk_onecell_data *onecell;
1223 int i;
1224
1225 onecell = devm_kzalloc(&client->dev, sizeof(*onecell), GFP_KERNEL);
1226 if (!onecell)
1227 return -ENOMEM;
1228
1229 onecell->clk_num = ARRAY_SIZE(ds3231_clks_init);
1230 onecell->clks = devm_kcalloc(&client->dev, onecell->clk_num,
1231 sizeof(onecell->clks[0]), GFP_KERNEL);
1232 if (!onecell->clks)
1233 return -ENOMEM;
1234
1235 for (i = 0; i < ARRAY_SIZE(ds3231_clks_init); i++) {
1236 struct clk_init_data init = ds3231_clks_init[i];
1237
1238 /*
1239 * Interrupt signal due to alarm conditions and square-wave
1240 * output share same pin, so don't initialize both.
1241 */
1242 if (i == DS3231_CLK_SQW && test_bit(HAS_ALARM, &ds1307->flags))
1243 continue;
1244
1245 /* optional override of the clockname */
1246 of_property_read_string_index(node, "clock-output-names", i,
1247 &init.name);
1248 ds1307->clks[i].init = &init;
1249
1250 onecell->clks[i] = devm_clk_register(&client->dev,
1251 &ds1307->clks[i]);
1252 if (IS_ERR(onecell->clks[i]))
1253 return PTR_ERR(onecell->clks[i]);
1254 }
1255
1256 if (!node)
1257 return 0;
1258
1259 of_clk_add_provider(node, of_clk_src_onecell_get, onecell);
1260
1261 return 0;
1262}
1263
1264static void ds1307_clks_register(struct ds1307 *ds1307)
1265{
1266 int ret;
1267
1268 if (ds1307->type != ds_3231)
1269 return;
1270
1271 ret = ds3231_clks_register(ds1307);
1272 if (ret) {
1273 dev_warn(&ds1307->client->dev,
1274 "unable to register clock device %d\n", ret);
1275 }
1276}
1277
1278#else
1279
1280static void ds1307_clks_register(struct ds1307 *ds1307)
1281{
1282}
1283
1284#endif /* CONFIG_COMMON_CLK */
1285
1286static int ds1307_probe(struct i2c_client *client,
1287 const struct i2c_device_id *id)
1288{
1289 struct ds1307 *ds1307;
1290 int err = -ENODEV;
1291 int tmp, wday;
1292 struct chip_desc *chip;
1293 struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
1294 bool want_irq = false;
1295 bool ds1307_can_wakeup_device = false;
1296 unsigned char *buf;
1297 struct ds1307_platform_data *pdata = dev_get_platdata(&client->dev);
1298 struct rtc_time tm;
1299 unsigned long timestamp;
1300
1301 irq_handler_t irq_handler = ds1307_irq;
1302
1303 static const int bbsqi_bitpos[] = {
1304 [ds_1337] = 0,
1305 [ds_1339] = DS1339_BIT_BBSQI,
1306 [ds_3231] = DS3231_BIT_BBSQW,
1307 };
1308 const struct rtc_class_ops *rtc_ops = &ds13xx_rtc_ops;
1309
1310 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)
1311 && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
1312 return -EIO;
1313
1314 ds1307 = devm_kzalloc(&client->dev, sizeof(struct ds1307), GFP_KERNEL);
1315 if (!ds1307)
1316 return -ENOMEM;
1317
1318 i2c_set_clientdata(client, ds1307);
1319
1320 ds1307->client = client;
1321 if (id) {
1322 chip = &chips[id->driver_data];
1323 ds1307->type = id->driver_data;
1324 } else {
1325 const struct acpi_device_id *acpi_id;
1326
1327 acpi_id = acpi_match_device(ACPI_PTR(ds1307_acpi_ids),
1328 &client->dev);
1329 if (!acpi_id)
1330 return -ENODEV;
1331 chip = &chips[acpi_id->driver_data];
1332 ds1307->type = acpi_id->driver_data;
1333 }
1334
1335 if (!pdata)
1336 ds1307_trickle_init(client, chip);
1337 else if (pdata->trickle_charger_setup)
1338 chip->trickle_charger_setup = pdata->trickle_charger_setup;
1339
1340 if (chip->trickle_charger_setup && chip->trickle_charger_reg) {
1341 dev_dbg(&client->dev, "writing trickle charger info 0x%x to 0x%x\n",
1342 DS13XX_TRICKLE_CHARGER_MAGIC | chip->trickle_charger_setup,
1343 chip->trickle_charger_reg);
1344 i2c_smbus_write_byte_data(client, chip->trickle_charger_reg,
1345 DS13XX_TRICKLE_CHARGER_MAGIC |
1346 chip->trickle_charger_setup);
1347 }
1348
1349 buf = ds1307->regs;
1350 if (i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) {
1351 ds1307->read_block_data = ds1307_native_smbus_read_block_data;
1352 ds1307->write_block_data = ds1307_native_smbus_write_block_data;
1353 } else {
1354 ds1307->read_block_data = ds1307_read_block_data;
1355 ds1307->write_block_data = ds1307_write_block_data;
1356 }
1357
1358#ifdef CONFIG_OF
1359/*
1360 * For devices with no IRQ directly connected to the SoC, the RTC chip
1361 * can be forced as a wakeup source by stating that explicitly in
1362 * the device's .dts file using the "wakeup-source" boolean property.
1363 * If the "wakeup-source" property is set, don't request an IRQ.
1364 * This will guarantee the 'wakealarm' sysfs entry is available on the device,
1365 * if supported by the RTC.
1366 */
1367 if (of_property_read_bool(client->dev.of_node, "wakeup-source")) {
1368 ds1307_can_wakeup_device = true;
1369 }
1370 /* Intersil ISL12057 DT backward compatibility */
1371 if (of_property_read_bool(client->dev.of_node,
1372 "isil,irq2-can-wakeup-machine")) {
1373 ds1307_can_wakeup_device = true;
1374 }
1375#endif
1376
1377 switch (ds1307->type) {
1378 case ds_1337:
1379 case ds_1339:
1380 case ds_3231:
1381 /* get registers that the "rtc" read below won't read... */
1382 tmp = ds1307->read_block_data(ds1307->client,
1383 DS1337_REG_CONTROL, 2, buf);
1384 if (tmp != 2) {
1385 dev_dbg(&client->dev, "read error %d\n", tmp);
1386 err = -EIO;
1387 goto exit;
1388 }
1389
1390 /* oscillator off? turn it on, so clock can tick. */
1391 if (ds1307->regs[0] & DS1337_BIT_nEOSC)
1392 ds1307->regs[0] &= ~DS1337_BIT_nEOSC;
1393
1394 /*
1395 * Using IRQ or defined as wakeup-source?
1396 * Disable the square wave and both alarms.
1397 * For some variants, be sure alarms can trigger when we're
1398 * running on Vbackup (BBSQI/BBSQW)
1399 */
1400 if (chip->alarm && (ds1307->client->irq > 0 ||
1401 ds1307_can_wakeup_device)) {
1402 ds1307->regs[0] |= DS1337_BIT_INTCN
1403 | bbsqi_bitpos[ds1307->type];
1404 ds1307->regs[0] &= ~(DS1337_BIT_A2IE | DS1337_BIT_A1IE);
1405
1406 want_irq = true;
1407 }
1408
1409 i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL,
1410 ds1307->regs[0]);
1411
1412 /* oscillator fault? clear flag, and warn */
1413 if (ds1307->regs[1] & DS1337_BIT_OSF) {
1414 i2c_smbus_write_byte_data(client, DS1337_REG_STATUS,
1415 ds1307->regs[1] & ~DS1337_BIT_OSF);
1416 dev_warn(&client->dev, "SET TIME!\n");
1417 }
1418 break;
1419
1420 case rx_8025:
1421 tmp = i2c_smbus_read_i2c_block_data(ds1307->client,
1422 RX8025_REG_CTRL1 << 4 | 0x08, 2, buf);
1423 if (tmp != 2) {
1424 dev_dbg(&client->dev, "read error %d\n", tmp);
1425 err = -EIO;
1426 goto exit;
1427 }
1428
1429 /* oscillator off? turn it on, so clock can tick. */
1430 if (!(ds1307->regs[1] & RX8025_BIT_XST)) {
1431 ds1307->regs[1] |= RX8025_BIT_XST;
1432 i2c_smbus_write_byte_data(client,
1433 RX8025_REG_CTRL2 << 4 | 0x08,
1434 ds1307->regs[1]);
1435 dev_warn(&client->dev,
1436 "oscillator stop detected - SET TIME!\n");
1437 }
1438
1439 if (ds1307->regs[1] & RX8025_BIT_PON) {
1440 ds1307->regs[1] &= ~RX8025_BIT_PON;
1441 i2c_smbus_write_byte_data(client,
1442 RX8025_REG_CTRL2 << 4 | 0x08,
1443 ds1307->regs[1]);
1444 dev_warn(&client->dev, "power-on detected\n");
1445 }
1446
1447 if (ds1307->regs[1] & RX8025_BIT_VDET) {
1448 ds1307->regs[1] &= ~RX8025_BIT_VDET;
1449 i2c_smbus_write_byte_data(client,
1450 RX8025_REG_CTRL2 << 4 | 0x08,
1451 ds1307->regs[1]);
1452 dev_warn(&client->dev, "voltage drop detected\n");
1453 }
1454
1455 /* make sure we are running in 24hour mode */
1456 if (!(ds1307->regs[0] & RX8025_BIT_2412)) {
1457 u8 hour;
1458
1459 /* switch to 24 hour mode */
1460 i2c_smbus_write_byte_data(client,
1461 RX8025_REG_CTRL1 << 4 | 0x08,
1462 ds1307->regs[0] |
1463 RX8025_BIT_2412);
1464
1465 tmp = i2c_smbus_read_i2c_block_data(ds1307->client,
1466 RX8025_REG_CTRL1 << 4 | 0x08, 2, buf);
1467 if (tmp != 2) {
1468 dev_dbg(&client->dev, "read error %d\n", tmp);
1469 err = -EIO;
1470 goto exit;
1471 }
1472
1473 /* correct hour */
1474 hour = bcd2bin(ds1307->regs[DS1307_REG_HOUR]);
1475 if (hour == 12)
1476 hour = 0;
1477 if (ds1307->regs[DS1307_REG_HOUR] & DS1307_BIT_PM)
1478 hour += 12;
1479
1480 i2c_smbus_write_byte_data(client,
1481 DS1307_REG_HOUR << 4 | 0x08,
1482 hour);
1483 }
1484 break;
1485 case ds_1388:
1486 ds1307->offset = 1; /* Seconds starts at 1 */
1487 break;
1488 case mcp794xx:
1489 rtc_ops = &mcp794xx_rtc_ops;
1490 if (ds1307->client->irq > 0 && chip->alarm) {
1491 irq_handler = mcp794xx_irq;
1492 want_irq = true;
1493 }
1494 break;
1495 default:
1496 break;
1497 }
1498
1499read_rtc:
1500 /* read RTC registers */
1501 tmp = ds1307->read_block_data(ds1307->client, ds1307->offset, 8, buf);
1502 if (tmp != 8) {
1503 dev_dbg(&client->dev, "read error %d\n", tmp);
1504 err = -EIO;
1505 goto exit;
1506 }
1507
1508 /*
1509 * minimal sanity checking; some chips (like DS1340) don't
1510 * specify the extra bits as must-be-zero, but there are
1511 * still a few values that are clearly out-of-range.
1512 */
1513 tmp = ds1307->regs[DS1307_REG_SECS];
1514 switch (ds1307->type) {
1515 case ds_1307:
1516 case m41t00:
1517 /* clock halted? turn it on, so clock can tick. */
1518 if (tmp & DS1307_BIT_CH) {
1519 i2c_smbus_write_byte_data(client, DS1307_REG_SECS, 0);
1520 dev_warn(&client->dev, "SET TIME!\n");
1521 goto read_rtc;
1522 }
1523 break;
1524 case ds_1338:
1525 /* clock halted? turn it on, so clock can tick. */
1526 if (tmp & DS1307_BIT_CH)
1527 i2c_smbus_write_byte_data(client, DS1307_REG_SECS, 0);
1528
1529 /* oscillator fault? clear flag, and warn */
1530 if (ds1307->regs[DS1307_REG_CONTROL] & DS1338_BIT_OSF) {
1531 i2c_smbus_write_byte_data(client, DS1307_REG_CONTROL,
1532 ds1307->regs[DS1307_REG_CONTROL]
1533 & ~DS1338_BIT_OSF);
1534 dev_warn(&client->dev, "SET TIME!\n");
1535 goto read_rtc;
1536 }
1537 break;
1538 case ds_1340:
1539 /* clock halted? turn it on, so clock can tick. */
1540 if (tmp & DS1340_BIT_nEOSC)
1541 i2c_smbus_write_byte_data(client, DS1307_REG_SECS, 0);
1542
1543 tmp = i2c_smbus_read_byte_data(client, DS1340_REG_FLAG);
1544 if (tmp < 0) {
1545 dev_dbg(&client->dev, "read error %d\n", tmp);
1546 err = -EIO;
1547 goto exit;
1548 }
1549
1550 /* oscillator fault? clear flag, and warn */
1551 if (tmp & DS1340_BIT_OSF) {
1552 i2c_smbus_write_byte_data(client, DS1340_REG_FLAG, 0);
1553 dev_warn(&client->dev, "SET TIME!\n");
1554 }
1555 break;
1556 case mcp794xx:
1557 /* make sure that the backup battery is enabled */
1558 if (!(ds1307->regs[DS1307_REG_WDAY] & MCP794XX_BIT_VBATEN)) {
1559 i2c_smbus_write_byte_data(client, DS1307_REG_WDAY,
1560 ds1307->regs[DS1307_REG_WDAY]
1561 | MCP794XX_BIT_VBATEN);
1562 }
1563
1564 /* clock halted? turn it on, so clock can tick. */
1565 if (!(tmp & MCP794XX_BIT_ST)) {
1566 i2c_smbus_write_byte_data(client, DS1307_REG_SECS,
1567 MCP794XX_BIT_ST);
1568 dev_warn(&client->dev, "SET TIME!\n");
1569 goto read_rtc;
1570 }
1571
1572 break;
1573 default:
1574 break;
1575 }
1576
1577 tmp = ds1307->regs[DS1307_REG_HOUR];
1578 switch (ds1307->type) {
1579 case ds_1340:
1580 case m41t00:
1581 /*
1582 * NOTE: ignores century bits; fix before deploying
1583 * systems that will run through year 2100.
1584 */
1585 break;
1586 case rx_8025:
1587 break;
1588 default:
1589 if (!(tmp & DS1307_BIT_12HR))
1590 break;
1591
1592 /*
1593 * Be sure we're in 24 hour mode. Multi-master systems
1594 * take note...
1595 */
1596 tmp = bcd2bin(tmp & 0x1f);
1597 if (tmp == 12)
1598 tmp = 0;
1599 if (ds1307->regs[DS1307_REG_HOUR] & DS1307_BIT_PM)
1600 tmp += 12;
1601 i2c_smbus_write_byte_data(client,
1602 ds1307->offset + DS1307_REG_HOUR,
1603 bin2bcd(tmp));
1604 }
1605
1606 /*
1607 * Some IPs have weekday reset value = 0x1 which might not correct
1608 * hence compute the wday using the current date/month/year values
1609 */
1610 ds1307_get_time(&client->dev, &tm);
1611 wday = tm.tm_wday;
1612 timestamp = rtc_tm_to_time64(&tm);
1613 rtc_time64_to_tm(timestamp, &tm);
1614
1615 /*
1616 * Check if reset wday is different from the computed wday
1617 * If different then set the wday which we computed using
1618 * timestamp
1619 */
1620 if (wday != tm.tm_wday) {
1621 wday = i2c_smbus_read_byte_data(client, MCP794XX_REG_WEEKDAY);
1622 wday = wday & ~MCP794XX_REG_WEEKDAY_WDAY_MASK;
1623 wday = wday | (tm.tm_wday + 1);
1624 i2c_smbus_write_byte_data(client, MCP794XX_REG_WEEKDAY, wday);
1625 }
1626
1627 if (want_irq) {
1628 device_set_wakeup_capable(&client->dev, true);
1629 set_bit(HAS_ALARM, &ds1307->flags);
1630 }
1631 ds1307->rtc = devm_rtc_device_register(&client->dev, client->name,
1632 rtc_ops, THIS_MODULE);
1633 if (IS_ERR(ds1307->rtc)) {
1634 return PTR_ERR(ds1307->rtc);
1635 }
1636
1637 if (ds1307_can_wakeup_device && ds1307->client->irq <= 0) {
1638 /* Disable request for an IRQ */
1639 want_irq = false;
1640 dev_info(&client->dev, "'wakeup-source' is set, request for an IRQ is disabled!\n");
1641 /* We cannot support UIE mode if we do not have an IRQ line */
1642 ds1307->rtc->uie_unsupported = 1;
1643 }
1644
1645 if (want_irq) {
1646 err = devm_request_threaded_irq(&client->dev,
1647 client->irq, NULL, irq_handler,
1648 IRQF_SHARED | IRQF_ONESHOT,
1649 ds1307->rtc->name, client);
1650 if (err) {
1651 client->irq = 0;
1652 device_set_wakeup_capable(&client->dev, false);
1653 clear_bit(HAS_ALARM, &ds1307->flags);
1654 dev_err(&client->dev, "unable to request IRQ!\n");
1655 } else
1656 dev_dbg(&client->dev, "got IRQ %d\n", client->irq);
1657 }
1658
1659 if (chip->nvram_size) {
1660
1661 ds1307->nvram = devm_kzalloc(&client->dev,
1662 sizeof(struct bin_attribute),
1663 GFP_KERNEL);
1664 if (!ds1307->nvram) {
1665 dev_err(&client->dev, "cannot allocate memory for nvram sysfs\n");
1666 } else {
1667
1668 ds1307->nvram->attr.name = "nvram";
1669 ds1307->nvram->attr.mode = S_IRUGO | S_IWUSR;
1670
1671 sysfs_bin_attr_init(ds1307->nvram);
1672
1673 ds1307->nvram->read = ds1307_nvram_read;
1674 ds1307->nvram->write = ds1307_nvram_write;
1675 ds1307->nvram->size = chip->nvram_size;
1676 ds1307->nvram_offset = chip->nvram_offset;
1677
1678 err = sysfs_create_bin_file(&client->dev.kobj,
1679 ds1307->nvram);
1680 if (err) {
1681 dev_err(&client->dev,
1682 "unable to create sysfs file: %s\n",
1683 ds1307->nvram->attr.name);
1684 } else {
1685 set_bit(HAS_NVRAM, &ds1307->flags);
1686 dev_info(&client->dev, "%zu bytes nvram\n",
1687 ds1307->nvram->size);
1688 }
1689 }
1690 }
1691
1692 ds1307_hwmon_register(ds1307);
1693 ds1307_clks_register(ds1307);
1694
1695 return 0;
1696
1697exit:
1698 return err;
1699}
1700
1701static int ds1307_remove(struct i2c_client *client)
1702{
1703 struct ds1307 *ds1307 = i2c_get_clientdata(client);
1704
1705 if (test_and_clear_bit(HAS_NVRAM, &ds1307->flags))
1706 sysfs_remove_bin_file(&client->dev.kobj, ds1307->nvram);
1707
1708 return 0;
1709}
1710
1711static struct i2c_driver ds1307_driver = {
1712 .driver = {
1713 .name = "rtc-ds1307",
1714 .acpi_match_table = ACPI_PTR(ds1307_acpi_ids),
1715 },
1716 .probe = ds1307_probe,
1717 .remove = ds1307_remove,
1718 .id_table = ds1307_id,
1719};
1720
1721module_i2c_driver(ds1307_driver);
1722
1723MODULE_DESCRIPTION("RTC driver for DS1307 and similar chips");
1724MODULE_LICENSE("GPL");