Loading...
1# ==========================================================================
2# Building
3# ==========================================================================
4
5src := $(obj)
6
7PHONY := __build
8__build:
9
10# Init all relevant variables used in kbuild files so
11# 1) they have correct type
12# 2) they do not inherit any value from the environment
13obj-y :=
14obj-m :=
15lib-y :=
16lib-m :=
17always :=
18targets :=
19subdir-y :=
20subdir-m :=
21EXTRA_AFLAGS :=
22EXTRA_CFLAGS :=
23EXTRA_CPPFLAGS :=
24EXTRA_LDFLAGS :=
25asflags-y :=
26ccflags-y :=
27cppflags-y :=
28ldflags-y :=
29
30subdir-asflags-y :=
31subdir-ccflags-y :=
32
33# Read auto.conf if it exists, otherwise ignore
34-include include/config/auto.conf
35
36include scripts/Kbuild.include
37
38# For backward compatibility check that these variables do not change
39save-cflags := $(CFLAGS)
40
41# The filename Kbuild has precedence over Makefile
42kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))
43kbuild-file := $(if $(wildcard $(kbuild-dir)/Kbuild),$(kbuild-dir)/Kbuild,$(kbuild-dir)/Makefile)
44include $(kbuild-file)
45
46# If the save-* variables changed error out
47ifeq ($(KBUILD_NOPEDANTIC),)
48 ifneq ("$(save-cflags)","$(CFLAGS)")
49 $(error CFLAGS was changed in "$(kbuild-file)". Fix it to use ccflags-y)
50 endif
51endif
52
53include scripts/Makefile.lib
54
55ifdef host-progs
56ifneq ($(hostprogs-y),$(host-progs))
57$(warning kbuild: $(obj)/Makefile - Usage of host-progs is deprecated. Please replace with hostprogs-y!)
58hostprogs-y += $(host-progs)
59endif
60endif
61
62# Do not include host rules unless needed
63ifneq ($(hostprogs-y)$(hostprogs-m),)
64include scripts/Makefile.host
65endif
66
67ifneq ($(KBUILD_SRC),)
68# Create output directory if not already present
69_dummy := $(shell [ -d $(obj) ] || mkdir -p $(obj))
70
71# Create directories for object files if directory does not exist
72# Needed when obj-y := dir/file.o syntax is used
73_dummy := $(foreach d,$(obj-dirs), $(shell [ -d $(d) ] || mkdir -p $(d)))
74endif
75
76ifndef obj
77$(warning kbuild: Makefile.build is included improperly)
78endif
79
80# ===========================================================================
81
82ifneq ($(strip $(lib-y) $(lib-m) $(lib-)),)
83lib-target := $(obj)/lib.a
84endif
85
86ifneq ($(strip $(obj-y) $(obj-m) $(obj-) $(subdir-m) $(lib-target)),)
87builtin-target := $(obj)/built-in.o
88endif
89
90modorder-target := $(obj)/modules.order
91
92# We keep a list of all modules in $(MODVERDIR)
93
94__build: $(if $(KBUILD_BUILTIN),$(builtin-target) $(lib-target) $(extra-y)) \
95 $(if $(KBUILD_MODULES),$(obj-m) $(modorder-target)) \
96 $(subdir-ym) $(always)
97 @:
98
99# Linus' kernel sanity checking tool
100ifneq ($(KBUILD_CHECKSRC),0)
101 ifeq ($(KBUILD_CHECKSRC),2)
102 quiet_cmd_force_checksrc = CHECK $<
103 cmd_force_checksrc = $(CHECK) $(CHECKFLAGS) $(c_flags) $< ;
104 else
105 quiet_cmd_checksrc = CHECK $<
106 cmd_checksrc = $(CHECK) $(CHECKFLAGS) $(c_flags) $< ;
107 endif
108endif
109
110# Do section mismatch analysis for each module/built-in.o
111ifdef CONFIG_DEBUG_SECTION_MISMATCH
112 cmd_secanalysis = ; scripts/mod/modpost $@
113endif
114
115# Compile C sources (.c)
116# ---------------------------------------------------------------------------
117
118# Default is built-in, unless we know otherwise
119modkern_cflags = \
120 $(if $(part-of-module), \
121 $(KBUILD_CFLAGS_MODULE) $(CFLAGS_MODULE), \
122 $(KBUILD_CFLAGS_KERNEL) $(CFLAGS_KERNEL))
123quiet_modtag := $(empty) $(empty)
124
125$(real-objs-m) : part-of-module := y
126$(real-objs-m:.o=.i) : part-of-module := y
127$(real-objs-m:.o=.s) : part-of-module := y
128$(real-objs-m:.o=.lst): part-of-module := y
129
130$(real-objs-m) : quiet_modtag := [M]
131$(real-objs-m:.o=.i) : quiet_modtag := [M]
132$(real-objs-m:.o=.s) : quiet_modtag := [M]
133$(real-objs-m:.o=.lst): quiet_modtag := [M]
134
135$(obj-m) : quiet_modtag := [M]
136
137# Default for not multi-part modules
138modname = $(basetarget)
139
140$(multi-objs-m) : modname = $(modname-multi)
141$(multi-objs-m:.o=.i) : modname = $(modname-multi)
142$(multi-objs-m:.o=.s) : modname = $(modname-multi)
143$(multi-objs-m:.o=.lst) : modname = $(modname-multi)
144$(multi-objs-y) : modname = $(modname-multi)
145$(multi-objs-y:.o=.i) : modname = $(modname-multi)
146$(multi-objs-y:.o=.s) : modname = $(modname-multi)
147$(multi-objs-y:.o=.lst) : modname = $(modname-multi)
148
149quiet_cmd_cc_s_c = CC $(quiet_modtag) $@
150cmd_cc_s_c = $(CC) $(c_flags) $(DISABLE_LTO) -fverbose-asm -S -o $@ $<
151
152$(obj)/%.s: $(src)/%.c FORCE
153 $(call if_changed_dep,cc_s_c)
154
155quiet_cmd_cc_i_c = CPP $(quiet_modtag) $@
156cmd_cc_i_c = $(CPP) $(c_flags) -o $@ $<
157
158$(obj)/%.i: $(src)/%.c FORCE
159 $(call if_changed_dep,cc_i_c)
160
161cmd_gensymtypes = \
162 $(CPP) -D__GENKSYMS__ $(c_flags) $< | \
163 $(GENKSYMS) $(if $(1), -T $(2)) \
164 $(patsubst y,-s _,$(CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX)) \
165 $(if $(KBUILD_PRESERVE),-p) \
166 -r $(firstword $(wildcard $(2:.symtypes=.symref) /dev/null))
167
168quiet_cmd_cc_symtypes_c = SYM $(quiet_modtag) $@
169cmd_cc_symtypes_c = \
170 set -e; \
171 $(call cmd_gensymtypes,true,$@) >/dev/null; \
172 test -s $@ || rm -f $@
173
174$(obj)/%.symtypes : $(src)/%.c FORCE
175 $(call cmd,cc_symtypes_c)
176
177# C (.c) files
178# The C file is compiled and updated dependency information is generated.
179# (See cmd_cc_o_c + relevant part of rule_cc_o_c)
180
181quiet_cmd_cc_o_c = CC $(quiet_modtag) $@
182
183ifndef CONFIG_MODVERSIONS
184cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
185
186else
187# When module versioning is enabled the following steps are executed:
188# o compile a .tmp_<file>.o from <file>.c
189# o if .tmp_<file>.o doesn't contain a __ksymtab version, i.e. does
190# not export symbols, we just rename .tmp_<file>.o to <file>.o and
191# are done.
192# o otherwise, we calculate symbol versions using the good old
193# genksyms on the preprocessed source and postprocess them in a way
194# that they are usable as a linker script
195# o generate <file>.o from .tmp_<file>.o using the linker to
196# replace the unresolved symbols __crc_exported_symbol with
197# the actual value of the checksum generated by genksyms
198
199cmd_cc_o_c = $(CC) $(c_flags) -c -o $(@D)/.tmp_$(@F) $<
200cmd_modversions = \
201 if $(OBJDUMP) -h $(@D)/.tmp_$(@F) | grep -q __ksymtab; then \
202 $(call cmd_gensymtypes,$(KBUILD_SYMTYPES),$(@:.o=.symtypes)) \
203 > $(@D)/.tmp_$(@F:.o=.ver); \
204 \
205 $(LD) $(LDFLAGS) -r -o $@ $(@D)/.tmp_$(@F) \
206 -T $(@D)/.tmp_$(@F:.o=.ver); \
207 rm -f $(@D)/.tmp_$(@F) $(@D)/.tmp_$(@F:.o=.ver); \
208 else \
209 mv -f $(@D)/.tmp_$(@F) $@; \
210 fi;
211endif
212
213ifdef CONFIG_FTRACE_MCOUNT_RECORD
214ifdef BUILD_C_RECORDMCOUNT
215ifeq ("$(origin RECORDMCOUNT_WARN)", "command line")
216 RECORDMCOUNT_FLAGS = -w
217endif
218# Due to recursion, we must skip empty.o.
219# The empty.o file is created in the make process in order to determine
220# the target endianness and word size. It is made before all other C
221# files, including recordmcount.
222sub_cmd_record_mcount = \
223 if [ $(@) != "scripts/mod/empty.o" ]; then \
224 $(objtree)/scripts/recordmcount $(RECORDMCOUNT_FLAGS) "$(@)"; \
225 fi;
226recordmcount_source := $(srctree)/scripts/recordmcount.c \
227 $(srctree)/scripts/recordmcount.h
228else
229sub_cmd_record_mcount = set -e ; perl $(srctree)/scripts/recordmcount.pl "$(ARCH)" \
230 "$(if $(CONFIG_CPU_BIG_ENDIAN),big,little)" \
231 "$(if $(CONFIG_64BIT),64,32)" \
232 "$(OBJDUMP)" "$(OBJCOPY)" "$(CC) $(KBUILD_CFLAGS)" \
233 "$(LD)" "$(NM)" "$(RM)" "$(MV)" \
234 "$(if $(part-of-module),1,0)" "$(@)";
235recordmcount_source := $(srctree)/scripts/recordmcount.pl
236endif
237cmd_record_mcount = \
238 if [ "$(findstring $(CC_FLAGS_FTRACE),$(_c_flags))" = \
239 "$(CC_FLAGS_FTRACE)" ]; then \
240 $(sub_cmd_record_mcount) \
241 fi;
242endif
243
244ifdef CONFIG_STACK_VALIDATION
245ifneq ($(SKIP_STACK_VALIDATION),1)
246
247__objtool_obj := $(objtree)/tools/objtool/objtool
248
249objtool_args = check
250ifndef CONFIG_FRAME_POINTER
251objtool_args += --no-fp
252endif
253
254# 'OBJECT_FILES_NON_STANDARD := y': skip objtool checking for a directory
255# 'OBJECT_FILES_NON_STANDARD_foo.o := 'y': skip objtool checking for a file
256# 'OBJECT_FILES_NON_STANDARD_foo.o := 'n': override directory skip for a file
257cmd_objtool = $(if $(patsubst y%,, \
258 $(OBJECT_FILES_NON_STANDARD_$(basetarget).o)$(OBJECT_FILES_NON_STANDARD)n), \
259 $(__objtool_obj) $(objtool_args) "$(@)";)
260objtool_obj = $(if $(patsubst y%,, \
261 $(OBJECT_FILES_NON_STANDARD_$(basetarget).o)$(OBJECT_FILES_NON_STANDARD)n), \
262 $(__objtool_obj))
263
264endif # SKIP_STACK_VALIDATION
265endif # CONFIG_STACK_VALIDATION
266
267define rule_cc_o_c
268 $(call echo-cmd,checksrc) $(cmd_checksrc) \
269 $(call echo-cmd,cc_o_c) $(cmd_cc_o_c); \
270 $(cmd_modversions) \
271 $(cmd_objtool) \
272 $(call echo-cmd,record_mcount) \
273 $(cmd_record_mcount) \
274 scripts/basic/fixdep $(depfile) $@ '$(call make-cmd,cc_o_c)' > \
275 $(dot-target).tmp; \
276 rm -f $(depfile); \
277 mv -f $(dot-target).tmp $(dot-target).cmd
278endef
279
280define rule_as_o_S
281 $(call echo-cmd,as_o_S) $(cmd_as_o_S); \
282 $(cmd_objtool) \
283 scripts/basic/fixdep $(depfile) $@ '$(call make-cmd,as_o_S)' > \
284 $(dot-target).tmp; \
285 rm -f $(depfile); \
286 mv -f $(dot-target).tmp $(dot-target).cmd
287endef
288
289# Built-in and composite module parts
290$(obj)/%.o: $(src)/%.c $(recordmcount_source) $(objtool_obj) FORCE
291 $(call cmd,force_checksrc)
292 $(call if_changed_rule,cc_o_c)
293
294# Single-part modules are special since we need to mark them in $(MODVERDIR)
295
296$(single-used-m): $(obj)/%.o: $(src)/%.c $(recordmcount_source) $(objtool_obj) FORCE
297 $(call cmd,force_checksrc)
298 $(call if_changed_rule,cc_o_c)
299 @{ echo $(@:.o=.ko); echo $@; } > $(MODVERDIR)/$(@F:.o=.mod)
300
301quiet_cmd_cc_lst_c = MKLST $@
302 cmd_cc_lst_c = $(CC) $(c_flags) -g -c -o $*.o $< && \
303 $(CONFIG_SHELL) $(srctree)/scripts/makelst $*.o \
304 System.map $(OBJDUMP) > $@
305
306$(obj)/%.lst: $(src)/%.c FORCE
307 $(call if_changed_dep,cc_lst_c)
308
309# Compile assembler sources (.S)
310# ---------------------------------------------------------------------------
311
312modkern_aflags := $(KBUILD_AFLAGS_KERNEL) $(AFLAGS_KERNEL)
313
314$(real-objs-m) : modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE)
315$(real-objs-m:.o=.s): modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE)
316
317quiet_cmd_as_s_S = CPP $(quiet_modtag) $@
318cmd_as_s_S = $(CPP) $(a_flags) -o $@ $<
319
320$(obj)/%.s: $(src)/%.S FORCE
321 $(call if_changed_dep,as_s_S)
322
323quiet_cmd_as_o_S = AS $(quiet_modtag) $@
324cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $<
325
326$(obj)/%.o: $(src)/%.S $(objtool_obj) FORCE
327 $(call if_changed_rule,as_o_S)
328
329targets += $(real-objs-y) $(real-objs-m) $(lib-y)
330targets += $(extra-y) $(MAKECMDGOALS) $(always)
331
332# Linker scripts preprocessor (.lds.S -> .lds)
333# ---------------------------------------------------------------------------
334quiet_cmd_cpp_lds_S = LDS $@
335 cmd_cpp_lds_S = $(CPP) $(cpp_flags) -P -C -U$(ARCH) \
336 -D__ASSEMBLY__ -DLINKER_SCRIPT -o $@ $<
337
338$(obj)/%.lds: $(src)/%.lds.S FORCE
339 $(call if_changed_dep,cpp_lds_S)
340
341# ASN.1 grammar
342# ---------------------------------------------------------------------------
343quiet_cmd_asn1_compiler = ASN.1 $@
344 cmd_asn1_compiler = $(objtree)/scripts/asn1_compiler $< \
345 $(subst .h,.c,$@) $(subst .c,.h,$@)
346
347.PRECIOUS: $(objtree)/$(obj)/%-asn1.c $(objtree)/$(obj)/%-asn1.h
348
349$(obj)/%-asn1.c $(obj)/%-asn1.h: $(src)/%.asn1 $(objtree)/scripts/asn1_compiler
350 $(call cmd,asn1_compiler)
351
352# Build the compiled-in targets
353# ---------------------------------------------------------------------------
354
355# To build objects in subdirs, we need to descend into the directories
356$(sort $(subdir-obj-y)): $(subdir-ym) ;
357
358#
359# Rule to compile a set of .o files into one .o file
360#
361ifdef builtin-target
362quiet_cmd_link_o_target = LD $@
363# If the list of objects to link is empty, just create an empty built-in.o
364cmd_link_o_target = $(if $(strip $(obj-y)),\
365 $(LD) $(ld_flags) -r -o $@ $(filter $(obj-y), $^) \
366 $(cmd_secanalysis),\
367 rm -f $@; $(AR) rcs$(KBUILD_ARFLAGS) $@)
368
369$(builtin-target): $(obj-y) FORCE
370 $(call if_changed,link_o_target)
371
372targets += $(builtin-target)
373endif # builtin-target
374
375#
376# Rule to create modules.order file
377#
378# Create commands to either record .ko file or cat modules.order from
379# a subdirectory
380modorder-cmds = \
381 $(foreach m, $(modorder), \
382 $(if $(filter %/modules.order, $m), \
383 cat $m;, echo kernel/$m;))
384
385$(modorder-target): $(subdir-ym) FORCE
386 $(Q)(cat /dev/null; $(modorder-cmds)) > $@
387
388#
389# Rule to compile a set of .o files into one .a file
390#
391ifdef lib-target
392quiet_cmd_link_l_target = AR $@
393cmd_link_l_target = rm -f $@; $(AR) rcs$(KBUILD_ARFLAGS) $@ $(lib-y)
394
395$(lib-target): $(lib-y) FORCE
396 $(call if_changed,link_l_target)
397
398targets += $(lib-target)
399endif
400
401#
402# Rule to link composite objects
403#
404# Composite objects are specified in kbuild makefile as follows:
405# <composite-object>-objs := <list of .o files>
406# or
407# <composite-object>-y := <list of .o files>
408# or
409# <composite-object>-m := <list of .o files>
410# The -m syntax only works if <composite object> is a module
411link_multi_deps = \
412$(filter $(addprefix $(obj)/, \
413$($(subst $(obj)/,,$(@:.o=-objs))) \
414$($(subst $(obj)/,,$(@:.o=-y))) \
415$($(subst $(obj)/,,$(@:.o=-m)))), $^)
416
417quiet_cmd_link_multi-y = LD $@
418cmd_link_multi-y = $(LD) $(ld_flags) -r -o $@ $(link_multi_deps) $(cmd_secanalysis)
419
420quiet_cmd_link_multi-m = LD [M] $@
421cmd_link_multi-m = $(cmd_link_multi-y)
422
423$(multi-used-y): FORCE
424 $(call if_changed,link_multi-y)
425$(call multi_depend, $(multi-used-y), .o, -objs -y)
426
427$(multi-used-m): FORCE
428 $(call if_changed,link_multi-m)
429 @{ echo $(@:.o=.ko); echo $(link_multi_deps); } > $(MODVERDIR)/$(@F:.o=.mod)
430$(call multi_depend, $(multi-used-m), .o, -objs -y -m)
431
432targets += $(multi-used-y) $(multi-used-m)
433
434
435# Descending
436# ---------------------------------------------------------------------------
437
438PHONY += $(subdir-ym)
439$(subdir-ym):
440 $(Q)$(MAKE) $(build)=$@
441
442# Add FORCE to the prequisites of a target to force it to be always rebuilt.
443# ---------------------------------------------------------------------------
444
445PHONY += FORCE
446
447FORCE:
448
449# Read all saved command lines and dependencies for the $(targets) we
450# may be building above, using $(if_changed{,_dep}). As an
451# optimization, we don't need to read them if the target does not
452# exist, we will rebuild anyway in that case.
453
454targets := $(wildcard $(sort $(targets)))
455cmd_files := $(wildcard $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
456
457ifneq ($(cmd_files),)
458 include $(cmd_files)
459endif
460
461# Declare the contents of the .PHONY variable as phony. We keep that
462# information in a variable se we can use it in if_changed and friends.
463
464.PHONY: $(PHONY)
1# SPDX-License-Identifier: GPL-2.0
2# ==========================================================================
3# Building
4# ==========================================================================
5
6src := $(obj)
7
8PHONY := __build
9__build:
10
11# Init all relevant variables used in kbuild files so
12# 1) they have correct type
13# 2) they do not inherit any value from the environment
14obj-y :=
15obj-m :=
16lib-y :=
17lib-m :=
18always :=
19targets :=
20subdir-y :=
21subdir-m :=
22EXTRA_AFLAGS :=
23EXTRA_CFLAGS :=
24EXTRA_CPPFLAGS :=
25EXTRA_LDFLAGS :=
26asflags-y :=
27ccflags-y :=
28cppflags-y :=
29ldflags-y :=
30
31subdir-asflags-y :=
32subdir-ccflags-y :=
33
34# Read auto.conf if it exists, otherwise ignore
35-include include/config/auto.conf
36
37include scripts/Kbuild.include
38
39# For backward compatibility check that these variables do not change
40save-cflags := $(CFLAGS)
41
42# The filename Kbuild has precedence over Makefile
43kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))
44kbuild-file := $(if $(wildcard $(kbuild-dir)/Kbuild),$(kbuild-dir)/Kbuild,$(kbuild-dir)/Makefile)
45include $(kbuild-file)
46
47# If the save-* variables changed error out
48ifeq ($(KBUILD_NOPEDANTIC),)
49 ifneq ("$(save-cflags)","$(CFLAGS)")
50 $(error CFLAGS was changed in "$(kbuild-file)". Fix it to use ccflags-y)
51 endif
52endif
53
54include scripts/Makefile.lib
55
56ifdef host-progs
57ifneq ($(hostprogs-y),$(host-progs))
58$(warning kbuild: $(obj)/Makefile - Usage of host-progs is deprecated. Please replace with hostprogs-y!)
59hostprogs-y += $(host-progs)
60endif
61endif
62
63# Do not include host rules unless needed
64ifneq ($(hostprogs-y)$(hostprogs-m)$(hostlibs-y)$(hostlibs-m)$(hostcxxlibs-y)$(hostcxxlibs-m),)
65include scripts/Makefile.host
66endif
67
68ifndef obj
69$(warning kbuild: Makefile.build is included improperly)
70endif
71
72# ===========================================================================
73
74ifneq ($(strip $(lib-y) $(lib-m) $(lib-)),)
75lib-target := $(obj)/lib.a
76real-obj-y += $(obj)/lib-ksyms.o
77endif
78
79ifneq ($(strip $(real-obj-y) $(need-builtin)),)
80builtin-target := $(obj)/built-in.a
81endif
82
83modorder-target := $(obj)/modules.order
84
85# We keep a list of all modules in $(MODVERDIR)
86
87__build: $(if $(KBUILD_BUILTIN),$(builtin-target) $(lib-target) $(extra-y)) \
88 $(if $(KBUILD_MODULES),$(obj-m) $(modorder-target)) \
89 $(subdir-ym) $(always)
90 @:
91
92# Linus' kernel sanity checking tool
93ifneq ($(KBUILD_CHECKSRC),0)
94 ifeq ($(KBUILD_CHECKSRC),2)
95 quiet_cmd_force_checksrc = CHECK $<
96 cmd_force_checksrc = $(CHECK) $(CHECKFLAGS) $(c_flags) $< ;
97 else
98 quiet_cmd_checksrc = CHECK $<
99 cmd_checksrc = $(CHECK) $(CHECKFLAGS) $(c_flags) $< ;
100 endif
101endif
102
103ifneq ($(KBUILD_ENABLE_EXTRA_GCC_CHECKS),)
104 cmd_checkdoc = $(srctree)/scripts/kernel-doc -none $< ;
105endif
106
107# Do section mismatch analysis for each module/built-in.a
108ifdef CONFIG_DEBUG_SECTION_MISMATCH
109 cmd_secanalysis = ; scripts/mod/modpost $@
110endif
111
112# Compile C sources (.c)
113# ---------------------------------------------------------------------------
114
115# Default is built-in, unless we know otherwise
116modkern_cflags = \
117 $(if $(part-of-module), \
118 $(KBUILD_CFLAGS_MODULE) $(CFLAGS_MODULE), \
119 $(KBUILD_CFLAGS_KERNEL) $(CFLAGS_KERNEL))
120quiet_modtag := $(empty) $(empty)
121
122$(real-obj-m) : part-of-module := y
123$(real-obj-m:.o=.i) : part-of-module := y
124$(real-obj-m:.o=.s) : part-of-module := y
125$(real-obj-m:.o=.lst): part-of-module := y
126
127$(real-obj-m) : quiet_modtag := [M]
128$(real-obj-m:.o=.i) : quiet_modtag := [M]
129$(real-obj-m:.o=.s) : quiet_modtag := [M]
130$(real-obj-m:.o=.lst): quiet_modtag := [M]
131
132$(obj-m) : quiet_modtag := [M]
133
134quiet_cmd_cc_s_c = CC $(quiet_modtag) $@
135cmd_cc_s_c = $(CC) $(c_flags) $(DISABLE_LTO) -fverbose-asm -S -o $@ $<
136
137$(obj)/%.s: $(src)/%.c FORCE
138 $(call if_changed_dep,cc_s_c)
139
140quiet_cmd_cpp_i_c = CPP $(quiet_modtag) $@
141cmd_cpp_i_c = $(CPP) $(c_flags) -o $@ $<
142
143$(obj)/%.i: $(src)/%.c FORCE
144 $(call if_changed_dep,cpp_i_c)
145
146# These mirror gensymtypes_S and co below, keep them in synch.
147cmd_gensymtypes_c = \
148 $(CPP) -D__GENKSYMS__ $(c_flags) $< | \
149 $(GENKSYMS) $(if $(1), -T $(2)) \
150 $(patsubst y,-s _,$(CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX)) \
151 $(patsubst y,-R,$(CONFIG_MODULE_REL_CRCS)) \
152 $(if $(KBUILD_PRESERVE),-p) \
153 -r $(firstword $(wildcard $(2:.symtypes=.symref) /dev/null))
154
155quiet_cmd_cc_symtypes_c = SYM $(quiet_modtag) $@
156cmd_cc_symtypes_c = \
157 set -e; \
158 $(call cmd_gensymtypes_c,true,$@) >/dev/null; \
159 test -s $@ || rm -f $@
160
161$(obj)/%.symtypes : $(src)/%.c FORCE
162 $(call cmd,cc_symtypes_c)
163
164# LLVM assembly
165# Generate .ll files from .c
166quiet_cmd_cc_ll_c = CC $(quiet_modtag) $@
167 cmd_cc_ll_c = $(CC) $(c_flags) -emit-llvm -S -o $@ $<
168
169$(obj)/%.ll: $(src)/%.c FORCE
170 $(call if_changed_dep,cc_ll_c)
171
172# C (.c) files
173# The C file is compiled and updated dependency information is generated.
174# (See cmd_cc_o_c + relevant part of rule_cc_o_c)
175
176quiet_cmd_cc_o_c = CC $(quiet_modtag) $@
177
178ifndef CONFIG_MODVERSIONS
179cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
180
181else
182# When module versioning is enabled the following steps are executed:
183# o compile a .tmp_<file>.o from <file>.c
184# o if .tmp_<file>.o doesn't contain a __ksymtab version, i.e. does
185# not export symbols, we just rename .tmp_<file>.o to <file>.o and
186# are done.
187# o otherwise, we calculate symbol versions using the good old
188# genksyms on the preprocessed source and postprocess them in a way
189# that they are usable as a linker script
190# o generate <file>.o from .tmp_<file>.o using the linker to
191# replace the unresolved symbols __crc_exported_symbol with
192# the actual value of the checksum generated by genksyms
193
194cmd_cc_o_c = $(CC) $(c_flags) -c -o $(@D)/.tmp_$(@F) $<
195
196cmd_modversions_c = \
197 if $(OBJDUMP) -h $(@D)/.tmp_$(@F) | grep -q __ksymtab; then \
198 $(call cmd_gensymtypes_c,$(KBUILD_SYMTYPES),$(@:.o=.symtypes)) \
199 > $(@D)/.tmp_$(@F:.o=.ver); \
200 \
201 $(LD) $(LDFLAGS) -r -o $@ $(@D)/.tmp_$(@F) \
202 -T $(@D)/.tmp_$(@F:.o=.ver); \
203 rm -f $(@D)/.tmp_$(@F) $(@D)/.tmp_$(@F:.o=.ver); \
204 else \
205 mv -f $(@D)/.tmp_$(@F) $@; \
206 fi;
207endif
208
209ifdef CONFIG_FTRACE_MCOUNT_RECORD
210ifdef BUILD_C_RECORDMCOUNT
211ifeq ("$(origin RECORDMCOUNT_WARN)", "command line")
212 RECORDMCOUNT_FLAGS = -w
213endif
214# Due to recursion, we must skip empty.o.
215# The empty.o file is created in the make process in order to determine
216# the target endianness and word size. It is made before all other C
217# files, including recordmcount.
218sub_cmd_record_mcount = \
219 if [ $(@) != "scripts/mod/empty.o" ]; then \
220 $(objtree)/scripts/recordmcount $(RECORDMCOUNT_FLAGS) "$(@)"; \
221 fi;
222recordmcount_source := $(srctree)/scripts/recordmcount.c \
223 $(srctree)/scripts/recordmcount.h
224else
225sub_cmd_record_mcount = set -e ; perl $(srctree)/scripts/recordmcount.pl "$(ARCH)" \
226 "$(if $(CONFIG_CPU_BIG_ENDIAN),big,little)" \
227 "$(if $(CONFIG_64BIT),64,32)" \
228 "$(OBJDUMP)" "$(OBJCOPY)" "$(CC) $(KBUILD_CFLAGS)" \
229 "$(LD)" "$(NM)" "$(RM)" "$(MV)" \
230 "$(if $(part-of-module),1,0)" "$(@)";
231recordmcount_source := $(srctree)/scripts/recordmcount.pl
232endif # BUILD_C_RECORDMCOUNT
233cmd_record_mcount = \
234 if [ "$(findstring $(CC_FLAGS_FTRACE),$(_c_flags))" = \
235 "$(CC_FLAGS_FTRACE)" ]; then \
236 $(sub_cmd_record_mcount) \
237 fi;
238endif # CONFIG_FTRACE_MCOUNT_RECORD
239
240ifdef CONFIG_STACK_VALIDATION
241ifneq ($(SKIP_STACK_VALIDATION),1)
242
243__objtool_obj := $(objtree)/tools/objtool/objtool
244
245objtool_args = $(if $(CONFIG_UNWINDER_ORC),orc generate,check)
246
247objtool_args += $(if $(part-of-module), --module,)
248
249ifndef CONFIG_FRAME_POINTER
250objtool_args += --no-fp
251endif
252ifdef CONFIG_GCOV_KERNEL
253objtool_args += --no-unreachable
254else
255objtool_args += $(call cc-ifversion, -lt, 0405, --no-unreachable)
256endif
257ifdef CONFIG_RETPOLINE
258ifneq ($(RETPOLINE_CFLAGS),)
259 objtool_args += --retpoline
260endif
261endif
262
263
264ifdef CONFIG_MODVERSIONS
265objtool_o = $(@D)/.tmp_$(@F)
266else
267objtool_o = $(@)
268endif
269
270# 'OBJECT_FILES_NON_STANDARD := y': skip objtool checking for a directory
271# 'OBJECT_FILES_NON_STANDARD_foo.o := 'y': skip objtool checking for a file
272# 'OBJECT_FILES_NON_STANDARD_foo.o := 'n': override directory skip for a file
273cmd_objtool = $(if $(patsubst y%,, \
274 $(OBJECT_FILES_NON_STANDARD_$(basetarget).o)$(OBJECT_FILES_NON_STANDARD)n), \
275 $(__objtool_obj) $(objtool_args) "$(objtool_o)";)
276objtool_obj = $(if $(patsubst y%,, \
277 $(OBJECT_FILES_NON_STANDARD_$(basetarget).o)$(OBJECT_FILES_NON_STANDARD)n), \
278 $(__objtool_obj))
279
280endif # SKIP_STACK_VALIDATION
281endif # CONFIG_STACK_VALIDATION
282
283# Rebuild all objects when objtool changes, or is enabled/disabled.
284objtool_dep = $(objtool_obj) \
285 $(wildcard include/config/orc/unwinder.h \
286 include/config/stack/validation.h)
287
288define rule_cc_o_c
289 $(call echo-cmd,checksrc) $(cmd_checksrc) \
290 $(call cmd_and_fixdep,cc_o_c) \
291 $(cmd_checkdoc) \
292 $(call echo-cmd,objtool) $(cmd_objtool) \
293 $(cmd_modversions_c) \
294 $(call echo-cmd,record_mcount) $(cmd_record_mcount)
295endef
296
297define rule_as_o_S
298 $(call cmd_and_fixdep,as_o_S) \
299 $(call echo-cmd,objtool) $(cmd_objtool) \
300 $(cmd_modversions_S)
301endef
302
303# List module undefined symbols (or empty line if not enabled)
304ifdef CONFIG_TRIM_UNUSED_KSYMS
305cmd_undef_syms = $(NM) $@ | sed -n 's/^ *U //p' | xargs echo
306else
307cmd_undef_syms = echo
308endif
309
310# Built-in and composite module parts
311$(obj)/%.o: $(src)/%.c $(recordmcount_source) $(objtool_dep) FORCE
312 $(call cmd,force_checksrc)
313 $(call if_changed_rule,cc_o_c)
314
315# Single-part modules are special since we need to mark them in $(MODVERDIR)
316
317$(single-used-m): $(obj)/%.o: $(src)/%.c $(recordmcount_source) $(objtool_dep) FORCE
318 $(call cmd,force_checksrc)
319 $(call if_changed_rule,cc_o_c)
320 @{ echo $(@:.o=.ko); echo $@; \
321 $(cmd_undef_syms); } > $(MODVERDIR)/$(@F:.o=.mod)
322
323quiet_cmd_cc_lst_c = MKLST $@
324 cmd_cc_lst_c = $(CC) $(c_flags) -g -c -o $*.o $< && \
325 $(CONFIG_SHELL) $(srctree)/scripts/makelst $*.o \
326 System.map $(OBJDUMP) > $@
327
328$(obj)/%.lst: $(src)/%.c FORCE
329 $(call if_changed_dep,cc_lst_c)
330
331# Compile assembler sources (.S)
332# ---------------------------------------------------------------------------
333
334modkern_aflags := $(KBUILD_AFLAGS_KERNEL) $(AFLAGS_KERNEL)
335
336$(real-obj-m) : modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE)
337$(real-obj-m:.o=.s): modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE)
338
339# .S file exports must have their C prototypes defined in asm/asm-prototypes.h
340# or a file that it includes, in order to get versioned symbols. We build a
341# dummy C file that includes asm-prototypes and the EXPORT_SYMBOL lines from
342# the .S file (with trailing ';'), and run genksyms on that, to extract vers.
343#
344# This is convoluted. The .S file must first be preprocessed to run guards and
345# expand names, then the resulting exports must be constructed into plain
346# EXPORT_SYMBOL(symbol); to build our dummy C file, and that gets preprocessed
347# to make the genksyms input.
348#
349# These mirror gensymtypes_c and co above, keep them in synch.
350cmd_gensymtypes_S = \
351 (echo "\#include <linux/kernel.h>" ; \
352 echo "\#include <asm/asm-prototypes.h>" ; \
353 $(CPP) $(a_flags) $< | \
354 grep "\<___EXPORT_SYMBOL\>" | \
355 sed 's/.*___EXPORT_SYMBOL[[:space:]]*\([a-zA-Z0-9_]*\)[[:space:]]*,.*/EXPORT_SYMBOL(\1);/' ) | \
356 $(CPP) -D__GENKSYMS__ $(c_flags) -xc - | \
357 $(GENKSYMS) $(if $(1), -T $(2)) \
358 $(patsubst y,-s _,$(CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX)) \
359 $(patsubst y,-R,$(CONFIG_MODULE_REL_CRCS)) \
360 $(if $(KBUILD_PRESERVE),-p) \
361 -r $(firstword $(wildcard $(2:.symtypes=.symref) /dev/null))
362
363quiet_cmd_cc_symtypes_S = SYM $(quiet_modtag) $@
364cmd_cc_symtypes_S = \
365 set -e; \
366 $(call cmd_gensymtypes_S,true,$@) >/dev/null; \
367 test -s $@ || rm -f $@
368
369$(obj)/%.symtypes : $(src)/%.S FORCE
370 $(call cmd,cc_symtypes_S)
371
372
373quiet_cmd_cpp_s_S = CPP $(quiet_modtag) $@
374cmd_cpp_s_S = $(CPP) $(a_flags) -o $@ $<
375
376$(obj)/%.s: $(src)/%.S FORCE
377 $(call if_changed_dep,cpp_s_S)
378
379quiet_cmd_as_o_S = AS $(quiet_modtag) $@
380
381ifndef CONFIG_MODVERSIONS
382cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $<
383
384else
385
386ASM_PROTOTYPES := $(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/asm-prototypes.h)
387
388ifeq ($(ASM_PROTOTYPES),)
389cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $<
390
391else
392
393# versioning matches the C process described above, with difference that
394# we parse asm-prototypes.h C header to get function definitions.
395
396cmd_as_o_S = $(CC) $(a_flags) -c -o $(@D)/.tmp_$(@F) $<
397
398cmd_modversions_S = \
399 if $(OBJDUMP) -h $(@D)/.tmp_$(@F) | grep -q __ksymtab; then \
400 $(call cmd_gensymtypes_S,$(KBUILD_SYMTYPES),$(@:.o=.symtypes)) \
401 > $(@D)/.tmp_$(@F:.o=.ver); \
402 \
403 $(LD) $(LDFLAGS) -r -o $@ $(@D)/.tmp_$(@F) \
404 -T $(@D)/.tmp_$(@F:.o=.ver); \
405 rm -f $(@D)/.tmp_$(@F) $(@D)/.tmp_$(@F:.o=.ver); \
406 else \
407 mv -f $(@D)/.tmp_$(@F) $@; \
408 fi;
409endif
410endif
411
412$(obj)/%.o: $(src)/%.S $(objtool_dep) FORCE
413 $(call if_changed_rule,as_o_S)
414
415targets += $(filter-out $(subdir-obj-y), $(real-obj-y)) $(real-obj-m) $(lib-y)
416targets += $(extra-y) $(MAKECMDGOALS) $(always)
417
418# Linker scripts preprocessor (.lds.S -> .lds)
419# ---------------------------------------------------------------------------
420quiet_cmd_cpp_lds_S = LDS $@
421 cmd_cpp_lds_S = $(CPP) $(cpp_flags) -P -U$(ARCH) \
422 -D__ASSEMBLY__ -DLINKER_SCRIPT -o $@ $<
423
424$(obj)/%.lds: $(src)/%.lds.S FORCE
425 $(call if_changed_dep,cpp_lds_S)
426
427# ASN.1 grammar
428# ---------------------------------------------------------------------------
429quiet_cmd_asn1_compiler = ASN.1 $@
430 cmd_asn1_compiler = $(objtree)/scripts/asn1_compiler $< \
431 $(subst .h,.c,$@) $(subst .c,.h,$@)
432
433$(obj)/%.asn1.c $(obj)/%.asn1.h: $(src)/%.asn1 $(objtree)/scripts/asn1_compiler
434 $(call cmd,asn1_compiler)
435
436# Build the compiled-in targets
437# ---------------------------------------------------------------------------
438
439# To build objects in subdirs, we need to descend into the directories
440$(sort $(subdir-obj-y)): $(subdir-ym) ;
441
442#
443# Rule to compile a set of .o files into one .o file
444#
445ifdef builtin-target
446
447# built-in.a archives are made with no symbol table or index which
448# makes them small and fast, but unable to be used by the linker.
449# scripts/link-vmlinux.sh builds an aggregate built-in.a with a symbol
450# table and index.
451quiet_cmd_ar_builtin = AR $@
452 cmd_ar_builtin = rm -f $@; \
453 $(AR) rcSTP$(KBUILD_ARFLAGS) $@ $(filter $(real-obj-y), $^)
454
455$(builtin-target): $(real-obj-y) FORCE
456 $(call if_changed,ar_builtin)
457
458targets += $(builtin-target)
459endif # builtin-target
460
461#
462# Rule to create modules.order file
463#
464# Create commands to either record .ko file or cat modules.order from
465# a subdirectory
466modorder-cmds = \
467 $(foreach m, $(modorder), \
468 $(if $(filter %/modules.order, $m), \
469 cat $m;, echo kernel/$m;))
470
471$(modorder-target): $(subdir-ym) FORCE
472 $(Q)(cat /dev/null; $(modorder-cmds)) > $@
473
474#
475# Rule to compile a set of .o files into one .a file
476#
477ifdef lib-target
478quiet_cmd_link_l_target = AR $@
479
480# lib target archives do get a symbol table and index
481cmd_link_l_target = rm -f $@; $(AR) rcsTP$(KBUILD_ARFLAGS) $@ $(lib-y)
482
483$(lib-target): $(lib-y) FORCE
484 $(call if_changed,link_l_target)
485
486targets += $(lib-target)
487
488dummy-object = $(obj)/.lib_exports.o
489ksyms-lds = $(dot-target).lds
490ifdef CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX
491ref_prefix = EXTERN(_
492else
493ref_prefix = EXTERN(
494endif
495
496quiet_cmd_export_list = EXPORTS $@
497cmd_export_list = $(OBJDUMP) -h $< | \
498 sed -ne '/___ksymtab/s/.*+\([^ ]*\).*/$(ref_prefix)\1)/p' >$(ksyms-lds);\
499 rm -f $(dummy-object);\
500 echo | $(CC) $(a_flags) -c -o $(dummy-object) -x assembler -;\
501 $(LD) $(ld_flags) -r -o $@ -T $(ksyms-lds) $(dummy-object);\
502 rm $(dummy-object) $(ksyms-lds)
503
504$(obj)/lib-ksyms.o: $(lib-target) FORCE
505 $(call if_changed,export_list)
506
507targets += $(obj)/lib-ksyms.o
508
509endif
510
511#
512# Rule to link composite objects
513#
514# Composite objects are specified in kbuild makefile as follows:
515# <composite-object>-objs := <list of .o files>
516# or
517# <composite-object>-y := <list of .o files>
518# or
519# <composite-object>-m := <list of .o files>
520# The -m syntax only works if <composite object> is a module
521link_multi_deps = \
522$(filter $(addprefix $(obj)/, \
523$($(subst $(obj)/,,$(@:.o=-objs))) \
524$($(subst $(obj)/,,$(@:.o=-y))) \
525$($(subst $(obj)/,,$(@:.o=-m)))), $^)
526
527quiet_cmd_link_multi-m = LD [M] $@
528cmd_link_multi-m = $(LD) $(ld_flags) -r -o $@ $(link_multi_deps) $(cmd_secanalysis)
529
530$(multi-used-m): FORCE
531 $(call if_changed,link_multi-m)
532 @{ echo $(@:.o=.ko); echo $(link_multi_deps); \
533 $(cmd_undef_syms); } > $(MODVERDIR)/$(@F:.o=.mod)
534$(call multi_depend, $(multi-used-m), .o, -objs -y -m)
535
536targets += $(multi-used-m)
537targets := $(filter-out $(PHONY), $(targets))
538
539# Add intermediate targets:
540# When building objects with specific suffix patterns, add intermediate
541# targets that the final targets are derived from.
542intermediate_targets = $(foreach sfx, $(2), \
543 $(patsubst %$(strip $(1)),%$(sfx), \
544 $(filter %$(strip $(1)), $(targets))))
545# %.asn1.o <- %.asn1.[ch] <- %.asn1
546# %.dtb.o <- %.dtb.S <- %.dtb <- %.dts
547# %.lex.o <- %.lex.c <- %.l
548# %.tab.o <- %.tab.[ch] <- %.y
549targets += $(call intermediate_targets, .asn1.o, .asn1.c .asn1.h) \
550 $(call intermediate_targets, .dtb.o, .dtb.S .dtb) \
551 $(call intermediate_targets, .lex.o, .lex.c) \
552 $(call intermediate_targets, .tab.o, .tab.c .tab.h)
553
554# Descending
555# ---------------------------------------------------------------------------
556
557PHONY += $(subdir-ym)
558$(subdir-ym):
559 $(Q)$(MAKE) $(build)=$@ need-builtin=$(if $(findstring $@,$(subdir-obj-y)),1)
560
561# Add FORCE to the prequisites of a target to force it to be always rebuilt.
562# ---------------------------------------------------------------------------
563
564PHONY += FORCE
565
566FORCE:
567
568# Read all saved command lines and dependencies for the $(targets) we
569# may be building above, using $(if_changed{,_dep}). As an
570# optimization, we don't need to read them if the target does not
571# exist, we will rebuild anyway in that case.
572
573cmd_files := $(wildcard $(foreach f,$(sort $(targets)),$(dir $(f)).$(notdir $(f)).cmd))
574
575ifneq ($(cmd_files),)
576 include $(cmd_files)
577endif
578
579ifneq ($(KBUILD_SRC),)
580# Create directories for object files if they do not exist
581obj-dirs := $(sort $(obj) $(patsubst %/,%, $(dir $(targets))))
582# If cmd_files exist, their directories apparently exist. Skip mkdir.
583exist-dirs := $(sort $(patsubst %/,%, $(dir $(cmd_files))))
584obj-dirs := $(strip $(filter-out $(exist-dirs), $(obj-dirs)))
585ifneq ($(obj-dirs),)
586$(shell mkdir -p $(obj-dirs))
587endif
588endif
589
590# Some files contained in $(targets) are intermediate artifacts.
591# We never want them to be removed automatically.
592.SECONDARY: $(targets)
593
594# Declare the contents of the .PHONY variable as phony. We keep that
595# information in a variable se we can use it in if_changed and friends.
596
597.PHONY: $(PHONY)