Loading...
1#
2# USB Serial device configuration
3#
4
5menuconfig USB_SERIAL
6 tristate "USB Serial Converter support"
7 depends on TTY
8 ---help---
9 Say Y here if you have a USB device that provides normal serial
10 ports, or acts like a serial device, and you want to connect it to
11 your USB bus.
12
13 Please read <file:Documentation/usb/usb-serial.txt> for more
14 information on the specifics of the different devices that are
15 supported, and on how to use them.
16
17 To compile this driver as a module, choose M here: the
18 module will be called usbserial.
19
20if USB_SERIAL
21
22config USB_SERIAL_CONSOLE
23 bool "USB Serial Console device support"
24 depends on USB_SERIAL=y
25 ---help---
26 If you say Y here, it will be possible to use a USB to serial
27 converter port as the system console (the system console is the
28 device which receives all kernel messages and warnings and which
29 allows logins in single user mode). This could be useful if some
30 terminal or printer is connected to that serial port.
31
32 Even if you say Y here, the currently visible virtual console
33 (/dev/tty0) will still be used as the system console by default, but
34 you can alter that using a kernel command line option such as
35 "console=ttyUSB0". (Try "man bootparam" or see the documentation of
36 your boot loader (lilo or loadlin) about how to pass options to the
37 kernel at boot time.)
38
39 If you don't have a VGA card installed and you say Y here, the
40 kernel will automatically use the first USB to serial converter
41 port, /dev/ttyUSB0, as system console.
42
43 If unsure, say N.
44
45config USB_SERIAL_GENERIC
46 bool "USB Generic Serial Driver"
47 help
48 Say Y here if you want to use the generic USB serial driver. Please
49 read <file:Documentation/usb/usb-serial.txt> for more information on
50 using this driver. It is recommended that the "USB Serial converter
51 support" be compiled as a module for this driver to be used
52 properly.
53
54config USB_SERIAL_SIMPLE
55 tristate "USB Serial Simple Driver"
56 help
57 Say Y here to use the USB serial "simple" driver. This driver
58 handles a wide range of very simple devices, all in one
59 driver. Specifically, it supports:
60 - Suunto ANT+ USB device.
61 - Medtronic CareLink USB device
62 - Fundamental Software dongle.
63 - Google USB serial devices
64 - HP4x calculators
65 - a number of Motorola phones
66 - Novatel Wireless GPS receivers
67 - Siemens USB/MPI adapter.
68 - ViVOtech ViVOpay USB device.
69 - Infineon Modem Flashloader USB interface
70 - ZIO Motherboard USB serial interface
71
72 To compile this driver as a module, choose M here: the module
73 will be called usb-serial-simple.
74
75config USB_SERIAL_AIRCABLE
76 tristate "USB AIRcable Bluetooth Dongle Driver"
77 help
78 Say Y here if you want to use USB AIRcable Bluetooth Dongle.
79
80 To compile this driver as a module, choose M here: the module
81 will be called aircable.
82
83config USB_SERIAL_ARK3116
84 tristate "USB ARK Micro 3116 USB Serial Driver"
85 help
86 Say Y here if you want to use a ARK Micro 3116 USB to Serial
87 device.
88
89 To compile this driver as a module, choose M here: the
90 module will be called ark3116
91
92config USB_SERIAL_BELKIN
93 tristate "USB Belkin and Peracom Single Port Serial Driver"
94 help
95 Say Y here if you want to use a Belkin USB Serial single port
96 adaptor (F5U103 is one of the model numbers) or the Peracom single
97 port USB to serial adapter.
98
99 To compile this driver as a module, choose M here: the
100 module will be called belkin_sa.
101
102config USB_SERIAL_CH341
103 tristate "USB Winchiphead CH341 Single Port Serial Driver"
104 help
105 Say Y here if you want to use a Winchiphead CH341 single port
106 USB to serial adapter.
107
108 To compile this driver as a module, choose M here: the
109 module will be called ch341.
110
111config USB_SERIAL_WHITEHEAT
112 tristate "USB ConnectTech WhiteHEAT Serial Driver"
113 select USB_EZUSB_FX2
114 help
115 Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
116 USB to serial converter device.
117
118 To compile this driver as a module, choose M here: the
119 module will be called whiteheat.
120
121config USB_SERIAL_DIGI_ACCELEPORT
122 tristate "USB Digi International AccelePort USB Serial Driver"
123 ---help---
124 Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
125 2 port (plus parallel port) and 4 port USB serial converters. The
126 parallel port on the USB 2 appears as a third serial port on Linux.
127 The Digi Acceleport USB 8 is not yet supported by this driver.
128
129 This driver works under SMP with the usb-uhci driver. It does not
130 work under SMP with the uhci driver.
131
132 To compile this driver as a module, choose M here: the
133 module will be called digi_acceleport.
134
135config USB_SERIAL_CP210X
136 tristate "USB CP210x family of UART Bridge Controllers"
137 help
138 Say Y here if you want to use a CP2101/CP2102/CP2103 based USB
139 to RS232 converters.
140
141 To compile this driver as a module, choose M here: the
142 module will be called cp210x.
143
144config USB_SERIAL_CYPRESS_M8
145 tristate "USB Cypress M8 USB Serial Driver"
146 help
147 Say Y here if you want to use a device that contains the Cypress
148 USB to Serial microcontroller, such as the DeLorme Earthmate GPS.
149
150 Attempted SMP support... send bug reports!
151
152 Supported microcontrollers in the CY4601 family are:
153 CY7C63741 CY7C63742 CY7C63743 CY7C64013
154
155 To compile this driver as a module, choose M here: the
156 module will be called cypress_m8.
157
158config USB_SERIAL_EMPEG
159 tristate "USB Empeg empeg-car Mark I/II Driver"
160 help
161 Say Y here if you want to connect to your Empeg empeg-car Mark I/II
162 mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...}
163 device node. See <file:Documentation/usb/usb-serial.txt> for more
164 tidbits of information.
165
166 To compile this driver as a module, choose M here: the
167 module will be called empeg.
168
169config USB_SERIAL_FTDI_SIO
170 tristate "USB FTDI Single Port Serial Driver"
171 ---help---
172 Say Y here if you want to use a FTDI SIO single port USB to serial
173 converter device. The implementation I have is called the USC-1000.
174 This driver has also been tested with the 245 and 232 devices.
175
176 See <http://ftdi-usb-sio.sourceforge.net/> for more
177 information on this driver and the device.
178
179 To compile this driver as a module, choose M here: the
180 module will be called ftdi_sio.
181
182config USB_SERIAL_VISOR
183 tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
184 help
185 Say Y here if you want to connect to your HandSpring Visor, Palm
186 m500 or m505 through its USB docking station. See
187 <http://usbvisor.sourceforge.net/index.php3> for more information on using this
188 driver.
189
190 To compile this driver as a module, choose M here: the
191 module will be called visor.
192
193config USB_SERIAL_IPAQ
194 tristate "USB PocketPC PDA Driver"
195 help
196 Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
197 or any other PDA running Windows CE 3.0 or PocketPC 2002
198 using a USB cradle/cable. For information on using the driver,
199 read <file:Documentation/usb/usb-serial.txt>.
200
201 To compile this driver as a module, choose M here: the
202 module will be called ipaq.
203
204config USB_SERIAL_IR
205 tristate "USB IR Dongle Serial Driver"
206 help
207 Say Y here if you want to enable simple serial support for USB IrDA
208 devices. This is useful if you do not want to use the full IrDA
209 stack.
210
211 To compile this driver as a module, choose M here: the
212 module will be called ir-usb.
213
214config USB_SERIAL_EDGEPORT
215 tristate "USB Inside Out Edgeport Serial Driver"
216 ---help---
217 Say Y here if you want to use any of the following devices from
218 Inside Out Networks (Digi):
219 Edgeport/4
220 Rapidport/4
221 Edgeport/4t
222 Edgeport/2
223 Edgeport/4i
224 Edgeport/2i
225 Edgeport/421
226 Edgeport/21
227 Edgeport/8
228 Edgeport/8 Dual
229 Edgeport/2D8
230 Edgeport/4D8
231 Edgeport/8i
232 Edgeport/2 DIN
233 Edgeport/4 DIN
234 Edgeport/16 Dual
235
236 To compile this driver as a module, choose M here: the
237 module will be called io_edgeport.
238
239config USB_SERIAL_EDGEPORT_TI
240 tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
241 help
242 Say Y here if you want to use any of the devices from Inside Out
243 Networks (Digi) that are not supported by the io_edgeport driver.
244 This includes the Edgeport/1 device.
245
246 To compile this driver as a module, choose M here: the
247 module will be called io_ti.
248
249config USB_SERIAL_F81232
250 tristate "USB Fintek F81232 Single Port Serial Driver"
251 help
252 Say Y here if you want to use the Fintek F81232 single
253 port usb to serial adapter.
254
255 To compile this driver as a module, choose M here: the
256 module will be called f81232.
257
258config USB_SERIAL_GARMIN
259 tristate "USB Garmin GPS driver"
260 help
261 Say Y here if you want to connect to your Garmin GPS.
262 Should work with most Garmin GPS devices which have a native USB port.
263
264 See <http://sourceforge.net/projects/garmin-gps> for the latest
265 version of the driver.
266
267 To compile this driver as a module, choose M here: the
268 module will be called garmin_gps.
269
270config USB_SERIAL_IPW
271 tristate "USB IPWireless (3G UMTS TDD) Driver"
272 select USB_SERIAL_WWAN
273 help
274 Say Y here if you want to use a IPWireless USB modem such as
275 the ones supplied by Axity3G/Sentech South Africa.
276
277 To compile this driver as a module, choose M here: the
278 module will be called ipw.
279
280config USB_SERIAL_IUU
281 tristate "USB Infinity USB Unlimited Phoenix Driver"
282 help
283 Say Y here if you want to use a IUU in phoenix mode and get
284 an extra ttyUSBx device. More information available on
285 http://eczema.ecze.com/iuu_phoenix.html
286
287 To compile this driver as a module, choose M here: the
288 module will be called iuu_phoenix.o
289
290config USB_SERIAL_KEYSPAN_PDA
291 tristate "USB Keyspan PDA Single Port Serial Driver"
292 select USB_EZUSB_FX2
293 help
294 Say Y here if you want to use a Keyspan PDA single port USB to
295 serial converter device. This driver makes use of firmware
296 developed from scratch by Brian Warner.
297
298 To compile this driver as a module, choose M here: the
299 module will be called keyspan_pda.
300
301config USB_SERIAL_KEYSPAN
302 tristate "USB Keyspan USA-xxx Serial Driver"
303 select USB_EZUSB_FX2
304 ---help---
305 Say Y here if you want to use Keyspan USB to serial converter
306 devices. This driver makes use of Keyspan's official firmware
307 and was developed with their support. You must also include
308 firmware to support your particular device(s).
309
310 See <http://blemings.org/hugh/keyspan.html> for more information.
311
312 To compile this driver as a module, choose M here: the
313 module will be called keyspan.
314
315config USB_SERIAL_KEYSPAN_MPR
316 bool "USB Keyspan MPR Firmware"
317 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
318 help
319 Say Y here to include firmware for the Keyspan MPR converter.
320
321config USB_SERIAL_KEYSPAN_USA28
322 bool "USB Keyspan USA-28 Firmware"
323 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
324 help
325 Say Y here to include firmware for the USA-28 converter.
326
327config USB_SERIAL_KEYSPAN_USA28X
328 bool "USB Keyspan USA-28X Firmware"
329 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
330 help
331 Say Y here to include firmware for the USA-28X converter.
332 Be sure you have a USA-28X, there are also 28XA and 28XB
333 models, the label underneath has the actual part number.
334
335config USB_SERIAL_KEYSPAN_USA28XA
336 bool "USB Keyspan USA-28XA Firmware"
337 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
338 help
339 Say Y here to include firmware for the USA-28XA converter.
340 Be sure you have a USA-28XA, there are also 28X and 28XB
341 models, the label underneath has the actual part number.
342
343config USB_SERIAL_KEYSPAN_USA28XB
344 bool "USB Keyspan USA-28XB Firmware"
345 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
346 help
347 Say Y here to include firmware for the USA-28XB converter.
348 Be sure you have a USA-28XB, there are also 28X and 28XA
349 models, the label underneath has the actual part number.
350
351config USB_SERIAL_KEYSPAN_USA19
352 bool "USB Keyspan USA-19 Firmware"
353 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
354 help
355 Say Y here to include firmware for the USA-19 converter.
356
357config USB_SERIAL_KEYSPAN_USA18X
358 bool "USB Keyspan USA-18X Firmware"
359 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
360 help
361 Say Y here to include firmware for the USA-18X converter.
362
363config USB_SERIAL_KEYSPAN_USA19W
364 bool "USB Keyspan USA-19W Firmware"
365 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
366 help
367 Say Y here to include firmware for the USA-19W converter.
368
369config USB_SERIAL_KEYSPAN_USA19QW
370 bool "USB Keyspan USA-19QW Firmware"
371 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
372 help
373 Say Y here to include firmware for the USA-19QW converter.
374
375config USB_SERIAL_KEYSPAN_USA19QI
376 bool "USB Keyspan USA-19QI Firmware"
377 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
378 help
379 Say Y here to include firmware for the USA-19QI converter.
380
381config USB_SERIAL_KEYSPAN_USA49W
382 bool "USB Keyspan USA-49W Firmware"
383 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
384 help
385 Say Y here to include firmware for the USA-49W converter.
386
387config USB_SERIAL_KEYSPAN_USA49WLC
388 bool "USB Keyspan USA-49WLC Firmware"
389 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
390 help
391 Say Y here to include firmware for the USA-49WLC converter.
392
393config USB_SERIAL_KLSI
394 tristate "USB KL5KUSB105 (Palmconnect) Driver"
395 ---help---
396 Say Y here if you want to use a KL5KUSB105 - based single port
397 serial adapter. The most widely known -- and currently the only
398 tested -- device in this category is the PalmConnect USB Serial
399 adapter sold by Palm Inc. for use with their Palm III and Palm V
400 series PDAs.
401
402 Please read <file:Documentation/usb/usb-serial.txt> for more
403 information.
404
405 To compile this driver as a module, choose M here: the
406 module will be called kl5kusb105.
407
408config USB_SERIAL_KOBIL_SCT
409 tristate "USB KOBIL chipcard reader"
410 ---help---
411 Say Y here if you want to use one of the following KOBIL USB chipcard
412 readers:
413
414 - USB TWIN
415 - KAAN Standard Plus
416 - KAAN SIM
417 - SecOVID Reader Plus
418 - B1 Professional
419 - KAAN Professional
420
421 Note that you need a current CT-API.
422 To compile this driver as a module, choose M here: the
423 module will be called kobil_sct.
424
425config USB_SERIAL_MCT_U232
426 tristate "USB MCT Single Port Serial Driver"
427 ---help---
428 Say Y here if you want to use a USB Serial single port adapter from
429 Magic Control Technology Corp. (U232 is one of the model numbers).
430
431 This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
432 BAY, Belkin F5U109, and Belkin F5U409 devices.
433
434 To compile this driver as a module, choose M here: the
435 module will be called mct_u232.
436
437config USB_SERIAL_METRO
438 tristate "USB Metrologic Instruments USB-POS Barcode Scanner Driver"
439 ---help---
440 Say Y here if you want to use a USB POS Metrologic barcode scanner.
441
442 To compile this driver as a module, choose M here: the
443 module will be called metro-usb.
444
445config USB_SERIAL_MOS7720
446 tristate "USB Moschip 7720 Serial Driver"
447 ---help---
448 Say Y here if you want to use USB Serial single and double
449 port adapters from Moschip Semiconductor Tech.
450
451 To compile this driver as a module, choose M here: the
452 module will be called mos7720.
453
454config USB_SERIAL_MOS7715_PARPORT
455 bool "Support for parallel port on the Moschip 7715"
456 depends on USB_SERIAL_MOS7720
457 depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720
458 select PARPORT_NOT_PC
459 ---help---
460 Say Y if you have a Moschip 7715 device and would like to use
461 the parallel port it provides. The port will register with
462 the parport subsystem as a low-level driver.
463
464config USB_SERIAL_MOS7840
465 tristate "USB Moschip 7840/7820 USB Serial Driver"
466 ---help---
467 Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820
468 Dual-Serial port device from MosChip Semiconductor.
469
470 The MCS7840 and MCS7820 have been developed to connect a wide range
471 of standard serial devices to a USB host. The MCS7840 has a USB
472 device controller connected to four (4) individual UARTs while the
473 MCS7820 controller connects to two (2) individual UARTs.
474
475 To compile this driver as a module, choose M here: the
476 module will be called mos7840. If unsure, choose N.
477
478config USB_SERIAL_MXUPORT
479 tristate "USB Moxa UPORT Serial Driver"
480 ---help---
481 Say Y here if you want to use a MOXA UPort Serial hub.
482
483 This driver supports:
484
485 [2 Port]
486 - UPort 1250 : 2 Port RS-232/422/485 USB to Serial Hub
487 - UPort 1250I : 2 Port RS-232/422/485 USB to Serial Hub with
488 Isolation
489
490 [4 Port]
491 - UPort 1410 : 4 Port RS-232 USB to Serial Hub
492 - UPort 1450 : 4 Port RS-232/422/485 USB to Serial Hub
493 - UPort 1450I : 4 Port RS-232/422/485 USB to Serial Hub with
494 Isolation
495
496 [8 Port]
497 - UPort 1610-8 : 8 Port RS-232 USB to Serial Hub
498 - UPort 1650-8 : 8 Port RS-232/422/485 USB to Serial Hub
499
500 [16 Port]
501 - UPort 1610-16 : 16 Port RS-232 USB to Serial Hub
502 - UPort 1650-16 : 16 Port RS-232/422/485 USB to Serial Hub
503
504 To compile this driver as a module, choose M here: the
505 module will be called mxuport.
506
507config USB_SERIAL_NAVMAN
508 tristate "USB Navman GPS device"
509 help
510 To compile this driver as a module, choose M here: the
511 module will be called navman.
512
513config USB_SERIAL_PL2303
514 tristate "USB Prolific 2303 Single Port Serial Driver"
515 help
516 Say Y here if you want to use the PL2303 USB Serial single port
517 adapter from Prolific.
518
519 To compile this driver as a module, choose M here: the
520 module will be called pl2303.
521
522config USB_SERIAL_OTI6858
523 tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller"
524 help
525 Say Y here if you want to use the OTi-6858 single port USB to serial
526 converter device.
527
528 To compile this driver as a module, choose M here: the
529 module will be called oti6858.
530
531config USB_SERIAL_QCAUX
532 tristate "USB Qualcomm Auxiliary Serial Port Driver"
533 help
534 Say Y here if you want to use the auxiliary serial ports provided
535 by many modems based on Qualcomm chipsets. These ports often use
536 a proprietary protocol called DM and cannot be used for AT- or
537 PPP-based communication.
538
539 To compile this driver as a module, choose M here: the
540 module will be called qcaux. If unsure, choose N.
541
542config USB_SERIAL_QUALCOMM
543 tristate "USB Qualcomm Serial modem"
544 select USB_SERIAL_WWAN
545 help
546 Say Y here if you have a Qualcomm USB modem device. These are
547 usually wireless cellular modems.
548
549 To compile this driver as a module, choose M here: the
550 module will be called qcserial.
551
552config USB_SERIAL_SPCP8X5
553 tristate "USB SPCP8x5 USB To Serial Driver"
554 help
555 Say Y here if you want to use the spcp8x5 converter chip. This is
556 commonly found in some Z-Wave USB devices.
557
558 To compile this driver as a module, choose M here: the
559 module will be called spcp8x5.
560
561config USB_SERIAL_SAFE
562 tristate "USB Safe Serial (Encapsulated) Driver"
563
564config USB_SERIAL_SAFE_PADDED
565 bool "USB Secure Encapsulated Driver - Padded"
566 depends on USB_SERIAL_SAFE
567
568config USB_SERIAL_SIERRAWIRELESS
569 tristate "USB Sierra Wireless Driver"
570 help
571 Say M here if you want to use Sierra Wireless devices.
572
573 Many devices have a feature known as TRU-Install. For those devices
574 to work properly, the USB Storage Sierra feature must be enabled.
575
576 To compile this driver as a module, choose M here: the
577 module will be called sierra.
578
579config USB_SERIAL_SYMBOL
580 tristate "USB Symbol Barcode driver (serial mode)"
581 help
582 Say Y here if you want to use a Symbol USB Barcode device
583 in serial emulation mode.
584
585 To compile this driver as a module, choose M here: the
586 module will be called symbolserial.
587
588config USB_SERIAL_TI
589 tristate "USB TI 3410/5052 Serial Driver"
590 help
591 Say Y here if you want to use the TI USB 3410 or 5052
592 serial devices.
593
594 To compile this driver as a module, choose M here: the
595 module will be called ti_usb_3410_5052.
596
597config USB_SERIAL_CYBERJACK
598 tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader"
599 ---help---
600 Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
601 reader. This is an interface to ISO 7816 compatible contact-based
602 chipcards, e.g. GSM SIMs.
603
604 To compile this driver as a module, choose M here: the
605 module will be called cyberjack.
606
607 If unsure, say N.
608
609config USB_SERIAL_XIRCOM
610 tristate "USB Xircom / Entrega Single Port Serial Driver"
611 select USB_EZUSB_FX2
612 help
613 Say Y here if you want to use a Xircom or Entrega single port USB to
614 serial converter device. This driver makes use of firmware
615 developed from scratch by Brian Warner.
616
617 To compile this driver as a module, choose M here: the
618 module will be called keyspan_pda.
619
620config USB_SERIAL_WWAN
621 tristate
622
623config USB_SERIAL_OPTION
624 tristate "USB driver for GSM and CDMA modems"
625 select USB_SERIAL_WWAN
626 help
627 Say Y here if you have a GSM or CDMA modem that's connected to USB.
628
629 This driver also supports several PCMCIA cards which have a
630 built-in OHCI-USB adapter and an internally-connected GSM modem.
631 The USB bus on these cards is not accessible externally.
632
633 Supported devices include (some of?) those made by:
634 Option, Huawei, Audiovox, Novatel Wireless, or Anydata.
635
636 To compile this driver as a module, choose M here: the
637 module will be called option.
638
639 If this driver doesn't recognize your device,
640 it might be accessible via the FTDI_SIO driver.
641
642config USB_SERIAL_OMNINET
643 tristate "USB ZyXEL omni.net LCD Plus Driver"
644 help
645 Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
646
647 To compile this driver as a module, choose M here: the
648 module will be called omninet.
649
650config USB_SERIAL_OPTICON
651 tristate "USB Opticon Barcode driver (serial mode)"
652 help
653 Say Y here if you want to use a Opticon USB Barcode device
654 in serial emulation mode.
655
656 To compile this driver as a module, choose M here: the
657 module will be called opticon.
658
659config USB_SERIAL_XSENS_MT
660 tristate "Xsens motion tracker serial interface driver"
661 help
662 Say Y here if you want to use Xsens motion trackers.
663
664 This driver supports the new generation of motion trackers
665 by Xsens. Older devices can be accessed using the FTDI_SIO
666 driver.
667
668 To compile this driver as a module, choose M here: the
669 module will be called xsens_mt.
670
671config USB_SERIAL_WISHBONE
672 tristate "USB-Wishbone adapter interface driver"
673 help
674 Say Y here if you want to use a USB attached Wishbone bus.
675
676 Wishbone is an open hardware SoC bus commonly used in FPGA
677 designs. Bus access can be serialized using the Etherbone
678 protocol <http://www.ohwr.org/projects/etherbone-core>.
679
680 This driver is intended to be used with devices which attach
681 their internal Wishbone bus to a USB serial interface using
682 the Etherbone protocol. A userspace library is required to
683 speak the protocol made available by this driver as ttyUSBx.
684
685 To compile this driver as a module, choose M here: the
686 module will be called wishbone-serial.
687
688config USB_SERIAL_SSU100
689 tristate "USB Quatech SSU-100 Single Port Serial Driver"
690 help
691 Say Y here if you want to use the Quatech SSU-100 single
692 port usb to serial adapter.
693
694 To compile this driver as a module, choose M here: the
695 module will be called ssu100.
696
697config USB_SERIAL_QT2
698 tristate "USB Quatech Serial Driver for USB 2 devices"
699 help
700 Say Y here if you want to use the Quatech USB 2
701 serial adapters.
702
703 To compile this driver as a module, choose M here: the
704 module will be called quatech-serial.
705
706config USB_SERIAL_DEBUG
707 tristate "USB Debugging Device"
708 help
709 Say Y here if you have a USB debugging device used to receive
710 debugging data from another machine. The most common of these
711 devices is the NetChip TurboCONNECT device.
712
713 To compile this driver as a module, choose M here: the
714 module will be called usb-debug.
715
716endif # USB_SERIAL
1#
2# USB Serial device configuration
3#
4
5menuconfig USB_SERIAL
6 tristate "USB Serial Converter support"
7 depends on TTY
8 ---help---
9 Say Y here if you have a USB device that provides normal serial
10 ports, or acts like a serial device, and you want to connect it to
11 your USB bus.
12
13 Please read <file:Documentation/usb/usb-serial.txt> for more
14 information on the specifics of the different devices that are
15 supported, and on how to use them.
16
17 To compile this driver as a module, choose M here: the
18 module will be called usbserial.
19
20if USB_SERIAL
21
22config USB_SERIAL_CONSOLE
23 bool "USB Serial Console device support"
24 depends on USB_SERIAL=y
25 ---help---
26 If you say Y here, it will be possible to use a USB to serial
27 converter port as the system console (the system console is the
28 device which receives all kernel messages and warnings and which
29 allows logins in single user mode). This could be useful if some
30 terminal or printer is connected to that serial port.
31
32 Even if you say Y here, the currently visible virtual console
33 (/dev/tty0) will still be used as the system console by default, but
34 you can alter that using a kernel command line option such as
35 "console=ttyUSB0". (Try "man bootparam" or see the documentation of
36 your boot loader (lilo or loadlin) about how to pass options to the
37 kernel at boot time.)
38
39 If you don't have a VGA card installed and you say Y here, the
40 kernel will automatically use the first USB to serial converter
41 port, /dev/ttyUSB0, as system console.
42
43 If unsure, say N.
44
45config USB_SERIAL_GENERIC
46 bool "USB Generic Serial Driver"
47 help
48 Say Y here if you want to use the generic USB serial driver. Please
49 read <file:Documentation/usb/usb-serial.txt> for more information on
50 using this driver. It is recommended that the "USB Serial converter
51 support" be compiled as a module for this driver to be used
52 properly.
53
54config USB_SERIAL_SIMPLE
55 tristate "USB Serial Simple Driver"
56 help
57 Say Y here to use the USB serial "simple" driver. This driver
58 handles a wide range of very simple devices, all in one
59 driver. Specifically, it supports:
60 - Suunto ANT+ USB device.
61 - Fundamental Software dongle.
62 - HP4x calculators
63 - a number of Motorola phones
64 - Siemens USB/MPI adapter.
65 - ViVOtech ViVOpay USB device.
66 - Infineon Modem Flashloader USB interface
67 - ZIO Motherboard USB serial interface
68
69 To compile this driver as a module, choose M here: the module
70 will be called usb-serial-simple.
71
72config USB_SERIAL_AIRCABLE
73 tristate "USB AIRcable Bluetooth Dongle Driver"
74 help
75 Say Y here if you want to use USB AIRcable Bluetooth Dongle.
76
77 To compile this driver as a module, choose M here: the module
78 will be called aircable.
79
80config USB_SERIAL_ARK3116
81 tristate "USB ARK Micro 3116 USB Serial Driver"
82 help
83 Say Y here if you want to use a ARK Micro 3116 USB to Serial
84 device.
85
86 To compile this driver as a module, choose M here: the
87 module will be called ark3116
88
89config USB_SERIAL_BELKIN
90 tristate "USB Belkin and Peracom Single Port Serial Driver"
91 help
92 Say Y here if you want to use a Belkin USB Serial single port
93 adaptor (F5U103 is one of the model numbers) or the Peracom single
94 port USB to serial adapter.
95
96 To compile this driver as a module, choose M here: the
97 module will be called belkin_sa.
98
99config USB_SERIAL_CH341
100 tristate "USB Winchiphead CH341 Single Port Serial Driver"
101 help
102 Say Y here if you want to use a Winchiphead CH341 single port
103 USB to serial adapter.
104
105 To compile this driver as a module, choose M here: the
106 module will be called ch341.
107
108config USB_SERIAL_WHITEHEAT
109 tristate "USB ConnectTech WhiteHEAT Serial Driver"
110 select USB_EZUSB_FX2
111 help
112 Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
113 USB to serial converter device.
114
115 To compile this driver as a module, choose M here: the
116 module will be called whiteheat.
117
118config USB_SERIAL_DIGI_ACCELEPORT
119 tristate "USB Digi International AccelePort USB Serial Driver"
120 ---help---
121 Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
122 2 port (plus parallel port) and 4 port USB serial converters. The
123 parallel port on the USB 2 appears as a third serial port on Linux.
124 The Digi Acceleport USB 8 is not yet supported by this driver.
125
126 This driver works under SMP with the usb-uhci driver. It does not
127 work under SMP with the uhci driver.
128
129 To compile this driver as a module, choose M here: the
130 module will be called digi_acceleport.
131
132config USB_SERIAL_CP210X
133 tristate "USB CP210x family of UART Bridge Controllers"
134 help
135 Say Y here if you want to use a CP2101/CP2102/CP2103 based USB
136 to RS232 converters.
137
138 To compile this driver as a module, choose M here: the
139 module will be called cp210x.
140
141config USB_SERIAL_CYPRESS_M8
142 tristate "USB Cypress M8 USB Serial Driver"
143 help
144 Say Y here if you want to use a device that contains the Cypress
145 USB to Serial microcontroller, such as the DeLorme Earthmate GPS.
146
147 Attempted SMP support... send bug reports!
148
149 Supported microcontrollers in the CY4601 family are:
150 CY7C63741 CY7C63742 CY7C63743 CY7C64013
151
152 To compile this driver as a module, choose M here: the
153 module will be called cypress_m8.
154
155config USB_SERIAL_EMPEG
156 tristate "USB Empeg empeg-car Mark I/II Driver"
157 help
158 Say Y here if you want to connect to your Empeg empeg-car Mark I/II
159 mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...}
160 device node. See <file:Documentation/usb/usb-serial.txt> for more
161 tidbits of information.
162
163 To compile this driver as a module, choose M here: the
164 module will be called empeg.
165
166config USB_SERIAL_FTDI_SIO
167 tristate "USB FTDI Single Port Serial Driver"
168 ---help---
169 Say Y here if you want to use a FTDI SIO single port USB to serial
170 converter device. The implementation I have is called the USC-1000.
171 This driver has also be tested with the 245 and 232 devices.
172
173 See <http://ftdi-usb-sio.sourceforge.net/> for more
174 information on this driver and the device.
175
176 To compile this driver as a module, choose M here: the
177 module will be called ftdi_sio.
178
179config USB_SERIAL_VISOR
180 tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
181 help
182 Say Y here if you want to connect to your HandSpring Visor, Palm
183 m500 or m505 through its USB docking station. See
184 <http://usbvisor.sourceforge.net/index.php3> for more information on using this
185 driver.
186
187 To compile this driver as a module, choose M here: the
188 module will be called visor.
189
190config USB_SERIAL_IPAQ
191 tristate "USB PocketPC PDA Driver"
192 help
193 Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
194 or any other PDA running Windows CE 3.0 or PocketPC 2002
195 using a USB cradle/cable. For information on using the driver,
196 read <file:Documentation/usb/usb-serial.txt>.
197
198 To compile this driver as a module, choose M here: the
199 module will be called ipaq.
200
201config USB_SERIAL_IR
202 tristate "USB IR Dongle Serial Driver"
203 help
204 Say Y here if you want to enable simple serial support for USB IrDA
205 devices. This is useful if you do not want to use the full IrDA
206 stack.
207
208 To compile this driver as a module, choose M here: the
209 module will be called ir-usb.
210
211config USB_SERIAL_EDGEPORT
212 tristate "USB Inside Out Edgeport Serial Driver"
213 ---help---
214 Say Y here if you want to use any of the following devices from
215 Inside Out Networks (Digi):
216 Edgeport/4
217 Rapidport/4
218 Edgeport/4t
219 Edgeport/2
220 Edgeport/4i
221 Edgeport/2i
222 Edgeport/421
223 Edgeport/21
224 Edgeport/8
225 Edgeport/8 Dual
226 Edgeport/2D8
227 Edgeport/4D8
228 Edgeport/8i
229 Edgeport/2 DIN
230 Edgeport/4 DIN
231 Edgeport/16 Dual
232
233 To compile this driver as a module, choose M here: the
234 module will be called io_edgeport.
235
236config USB_SERIAL_EDGEPORT_TI
237 tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
238 help
239 Say Y here if you want to use any of the devices from Inside Out
240 Networks (Digi) that are not supported by the io_edgeport driver.
241 This includes the Edgeport/1 device.
242
243 To compile this driver as a module, choose M here: the
244 module will be called io_ti.
245
246config USB_SERIAL_F81232
247 tristate "USB Fintek F81232 Single Port Serial Driver"
248 help
249 Say Y here if you want to use the Fintek F81232 single
250 port usb to serial adapter.
251
252 To compile this driver as a module, choose M here: the
253 module will be called f81232.
254
255config USB_SERIAL_GARMIN
256 tristate "USB Garmin GPS driver"
257 help
258 Say Y here if you want to connect to your Garmin GPS.
259 Should work with most Garmin GPS devices which have a native USB port.
260
261 See <http://sourceforge.net/projects/garmin-gps> for the latest
262 version of the driver.
263
264 To compile this driver as a module, choose M here: the
265 module will be called garmin_gps.
266
267config USB_SERIAL_IPW
268 tristate "USB IPWireless (3G UMTS TDD) Driver"
269 select USB_SERIAL_WWAN
270 help
271 Say Y here if you want to use a IPWireless USB modem such as
272 the ones supplied by Axity3G/Sentech South Africa.
273
274 To compile this driver as a module, choose M here: the
275 module will be called ipw.
276
277config USB_SERIAL_IUU
278 tristate "USB Infinity USB Unlimited Phoenix Driver"
279 help
280 Say Y here if you want to use a IUU in phoenix mode and get
281 an extra ttyUSBx device. More information available on
282 http://eczema.ecze.com/iuu_phoenix.html
283
284 To compile this driver as a module, choose M here: the
285 module will be called iuu_phoenix.o
286
287config USB_SERIAL_KEYSPAN_PDA
288 tristate "USB Keyspan PDA Single Port Serial Driver"
289 select USB_EZUSB_FX2
290 help
291 Say Y here if you want to use a Keyspan PDA single port USB to
292 serial converter device. This driver makes use of firmware
293 developed from scratch by Brian Warner.
294
295 To compile this driver as a module, choose M here: the
296 module will be called keyspan_pda.
297
298config USB_SERIAL_KEYSPAN
299 tristate "USB Keyspan USA-xxx Serial Driver"
300 select USB_EZUSB_FX2
301 ---help---
302 Say Y here if you want to use Keyspan USB to serial converter
303 devices. This driver makes use of Keyspan's official firmware
304 and was developed with their support. You must also include
305 firmware to support your particular device(s).
306
307 See <http://blemings.org/hugh/keyspan.html> for more information.
308
309 To compile this driver as a module, choose M here: the
310 module will be called keyspan.
311
312config USB_SERIAL_KEYSPAN_MPR
313 bool "USB Keyspan MPR Firmware"
314 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
315 help
316 Say Y here to include firmware for the Keyspan MPR converter.
317
318config USB_SERIAL_KEYSPAN_USA28
319 bool "USB Keyspan USA-28 Firmware"
320 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
321 help
322 Say Y here to include firmware for the USA-28 converter.
323
324config USB_SERIAL_KEYSPAN_USA28X
325 bool "USB Keyspan USA-28X Firmware"
326 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
327 help
328 Say Y here to include firmware for the USA-28X converter.
329 Be sure you have a USA-28X, there are also 28XA and 28XB
330 models, the label underneath has the actual part number.
331
332config USB_SERIAL_KEYSPAN_USA28XA
333 bool "USB Keyspan USA-28XA Firmware"
334 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
335 help
336 Say Y here to include firmware for the USA-28XA converter.
337 Be sure you have a USA-28XA, there are also 28X and 28XB
338 models, the label underneath has the actual part number.
339
340config USB_SERIAL_KEYSPAN_USA28XB
341 bool "USB Keyspan USA-28XB Firmware"
342 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
343 help
344 Say Y here to include firmware for the USA-28XB converter.
345 Be sure you have a USA-28XB, there are also 28X and 28XA
346 models, the label underneath has the actual part number.
347
348config USB_SERIAL_KEYSPAN_USA19
349 bool "USB Keyspan USA-19 Firmware"
350 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
351 help
352 Say Y here to include firmware for the USA-19 converter.
353
354config USB_SERIAL_KEYSPAN_USA18X
355 bool "USB Keyspan USA-18X Firmware"
356 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
357 help
358 Say Y here to include firmware for the USA-18X converter.
359
360config USB_SERIAL_KEYSPAN_USA19W
361 bool "USB Keyspan USA-19W Firmware"
362 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
363 help
364 Say Y here to include firmware for the USA-19W converter.
365
366config USB_SERIAL_KEYSPAN_USA19QW
367 bool "USB Keyspan USA-19QW Firmware"
368 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
369 help
370 Say Y here to include firmware for the USA-19QW converter.
371
372config USB_SERIAL_KEYSPAN_USA19QI
373 bool "USB Keyspan USA-19QI Firmware"
374 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
375 help
376 Say Y here to include firmware for the USA-19QI converter.
377
378config USB_SERIAL_KEYSPAN_USA49W
379 bool "USB Keyspan USA-49W Firmware"
380 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
381 help
382 Say Y here to include firmware for the USA-49W converter.
383
384config USB_SERIAL_KEYSPAN_USA49WLC
385 bool "USB Keyspan USA-49WLC Firmware"
386 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
387 help
388 Say Y here to include firmware for the USA-49WLC converter.
389
390config USB_SERIAL_KLSI
391 tristate "USB KL5KUSB105 (Palmconnect) Driver"
392 ---help---
393 Say Y here if you want to use a KL5KUSB105 - based single port
394 serial adapter. The most widely known -- and currently the only
395 tested -- device in this category is the PalmConnect USB Serial
396 adapter sold by Palm Inc. for use with their Palm III and Palm V
397 series PDAs.
398
399 Please read <file:Documentation/usb/usb-serial.txt> for more
400 information.
401
402 To compile this driver as a module, choose M here: the
403 module will be called kl5kusb105.
404
405config USB_SERIAL_KOBIL_SCT
406 tristate "USB KOBIL chipcard reader"
407 ---help---
408 Say Y here if you want to use one of the following KOBIL USB chipcard
409 readers:
410
411 - USB TWIN
412 - KAAN Standard Plus
413 - KAAN SIM
414 - SecOVID Reader Plus
415 - B1 Professional
416 - KAAN Professional
417
418 Note that you need a current CT-API.
419 To compile this driver as a module, choose M here: the
420 module will be called kobil_sct.
421
422config USB_SERIAL_MCT_U232
423 tristate "USB MCT Single Port Serial Driver"
424 ---help---
425 Say Y here if you want to use a USB Serial single port adapter from
426 Magic Control Technology Corp. (U232 is one of the model numbers).
427
428 This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
429 BAY, Belkin F5U109, and Belkin F5U409 devices.
430
431 To compile this driver as a module, choose M here: the
432 module will be called mct_u232.
433
434config USB_SERIAL_METRO
435 tristate "USB Metrologic Instruments USB-POS Barcode Scanner Driver"
436 ---help---
437 Say Y here if you want to use a USB POS Metrologic barcode scanner.
438
439 To compile this driver as a module, choose M here: the
440 module will be called metro-usb.
441
442config USB_SERIAL_MOS7720
443 tristate "USB Moschip 7720 Serial Driver"
444 ---help---
445 Say Y here if you want to use USB Serial single and double
446 port adapters from Moschip Semiconductor Tech.
447
448 To compile this driver as a module, choose M here: the
449 module will be called mos7720.
450
451config USB_SERIAL_MOS7715_PARPORT
452 bool "Support for parallel port on the Moschip 7715"
453 depends on USB_SERIAL_MOS7720
454 depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720
455 select PARPORT_NOT_PC
456 ---help---
457 Say Y if you have a Moschip 7715 device and would like to use
458 the parallel port it provides. The port will register with
459 the parport subsystem as a low-level driver.
460
461config USB_SERIAL_MOS7840
462 tristate "USB Moschip 7840/7820 USB Serial Driver"
463 ---help---
464 Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820
465 Dual-Serial port device from MosChip Semiconductor.
466
467 The MCS7840 and MCS7820 have been developed to connect a wide range
468 of standard serial devices to a USB host. The MCS7840 has a USB
469 device controller connected to four (4) individual UARTs while the
470 MCS7820 controller connects to two (2) individual UARTs.
471
472 To compile this driver as a module, choose M here: the
473 module will be called mos7840. If unsure, choose N.
474
475config USB_SERIAL_MXUPORT
476 tristate "USB Moxa UPORT Serial Driver"
477 ---help---
478 Say Y here if you want to use a MOXA UPort Serial hub.
479
480 This driver supports:
481
482 [2 Port]
483 - UPort 1250 : 2 Port RS-232/422/485 USB to Serial Hub
484 - UPort 1250I : 2 Port RS-232/422/485 USB to Serial Hub with
485 Isolation
486
487 [4 Port]
488 - UPort 1410 : 4 Port RS-232 USB to Serial Hub
489 - UPort 1450 : 4 Port RS-232/422/485 USB to Serial Hub
490 - UPort 1450I : 4 Port RS-232/422/485 USB to Serial Hub with
491 Isolation
492
493 [8 Port]
494 - UPort 1610-8 : 8 Port RS-232 USB to Serial Hub
495 - UPort 1650-8 : 8 Port RS-232/422/485 USB to Serial Hub
496
497 [16 Port]
498 - UPort 1610-16 : 16 Port RS-232 USB to Serial Hub
499 - UPort 1650-16 : 16 Port RS-232/422/485 USB to Serial Hub
500
501 To compile this driver as a module, choose M here: the
502 module will be called mxuport.
503
504config USB_SERIAL_NAVMAN
505 tristate "USB Navman GPS device"
506 help
507 To compile this driver as a module, choose M here: the
508 module will be called navman.
509
510config USB_SERIAL_PL2303
511 tristate "USB Prolific 2303 Single Port Serial Driver"
512 help
513 Say Y here if you want to use the PL2303 USB Serial single port
514 adapter from Prolific.
515
516 To compile this driver as a module, choose M here: the
517 module will be called pl2303.
518
519config USB_SERIAL_OTI6858
520 tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller"
521 help
522 Say Y here if you want to use the OTi-6858 single port USB to serial
523 converter device.
524
525 To compile this driver as a module, choose M here: the
526 module will be called oti6858.
527
528config USB_SERIAL_QCAUX
529 tristate "USB Qualcomm Auxiliary Serial Port Driver"
530 help
531 Say Y here if you want to use the auxiliary serial ports provided
532 by many modems based on Qualcomm chipsets. These ports often use
533 a proprietary protocol called DM and cannot be used for AT- or
534 PPP-based communication.
535
536 To compile this driver as a module, choose M here: the
537 module will be called qcaux. If unsure, choose N.
538
539config USB_SERIAL_QUALCOMM
540 tristate "USB Qualcomm Serial modem"
541 select USB_SERIAL_WWAN
542 help
543 Say Y here if you have a Qualcomm USB modem device. These are
544 usually wireless cellular modems.
545
546 To compile this driver as a module, choose M here: the
547 module will be called qcserial.
548
549config USB_SERIAL_SPCP8X5
550 tristate "USB SPCP8x5 USB To Serial Driver"
551 help
552 Say Y here if you want to use the spcp8x5 converter chip. This is
553 commonly found in some Z-Wave USB devices.
554
555 To compile this driver as a module, choose M here: the
556 module will be called spcp8x5.
557
558config USB_SERIAL_SAFE
559 tristate "USB Safe Serial (Encapsulated) Driver"
560
561config USB_SERIAL_SAFE_PADDED
562 bool "USB Secure Encapsulated Driver - Padded"
563 depends on USB_SERIAL_SAFE
564
565config USB_SERIAL_SIERRAWIRELESS
566 tristate "USB Sierra Wireless Driver"
567 help
568 Say M here if you want to use Sierra Wireless devices.
569
570 Many devices have a feature known as TRU-Install. For those devices
571 to work properly, the USB Storage Sierra feature must be enabled.
572
573 To compile this driver as a module, choose M here: the
574 module will be called sierra.
575
576config USB_SERIAL_SYMBOL
577 tristate "USB Symbol Barcode driver (serial mode)"
578 help
579 Say Y here if you want to use a Symbol USB Barcode device
580 in serial emulation mode.
581
582 To compile this driver as a module, choose M here: the
583 module will be called symbolserial.
584
585config USB_SERIAL_TI
586 tristate "USB TI 3410/5052 Serial Driver"
587 help
588 Say Y here if you want to use the TI USB 3410 or 5052
589 serial devices.
590
591 To compile this driver as a module, choose M here: the
592 module will be called ti_usb_3410_5052.
593
594config USB_SERIAL_CYBERJACK
595 tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader"
596 ---help---
597 Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
598 reader. This is an interface to ISO 7816 compatible contact-based
599 chipcards, e.g. GSM SIMs.
600
601 To compile this driver as a module, choose M here: the
602 module will be called cyberjack.
603
604 If unsure, say N.
605
606config USB_SERIAL_XIRCOM
607 tristate "USB Xircom / Entregra Single Port Serial Driver"
608 select USB_EZUSB_FX2
609 help
610 Say Y here if you want to use a Xircom or Entregra single port USB to
611 serial converter device. This driver makes use of firmware
612 developed from scratch by Brian Warner.
613
614 To compile this driver as a module, choose M here: the
615 module will be called keyspan_pda.
616
617config USB_SERIAL_WWAN
618 tristate
619
620config USB_SERIAL_OPTION
621 tristate "USB driver for GSM and CDMA modems"
622 select USB_SERIAL_WWAN
623 help
624 Say Y here if you have a GSM or CDMA modem that's connected to USB.
625
626 This driver also supports several PCMCIA cards which have a
627 built-in OHCI-USB adapter and an internally-connected GSM modem.
628 The USB bus on these cards is not accessible externally.
629
630 Supported devices include (some of?) those made by:
631 Option, Huawei, Audiovox, Novatel Wireless, or Anydata.
632
633 To compile this driver as a module, choose M here: the
634 module will be called option.
635
636 If this driver doesn't recognize your device,
637 it might be accessible via the FTDI_SIO driver.
638
639config USB_SERIAL_OMNINET
640 tristate "USB ZyXEL omni.net LCD Plus Driver"
641 help
642 Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
643
644 To compile this driver as a module, choose M here: the
645 module will be called omninet.
646
647config USB_SERIAL_OPTICON
648 tristate "USB Opticon Barcode driver (serial mode)"
649 help
650 Say Y here if you want to use a Opticon USB Barcode device
651 in serial emulation mode.
652
653 To compile this driver as a module, choose M here: the
654 module will be called opticon.
655
656config USB_SERIAL_XSENS_MT
657 tristate "Xsens motion tracker serial interface driver"
658 help
659 Say Y here if you want to use Xsens motion trackers.
660
661 This driver supports the new generation of motion trackers
662 by Xsens. Older devices can be accessed using the FTDI_SIO
663 driver.
664
665 To compile this driver as a module, choose M here: the
666 module will be called xsens_mt.
667
668config USB_SERIAL_WISHBONE
669 tristate "USB-Wishbone adapter interface driver"
670 help
671 Say Y here if you want to use a USB attached Wishbone bus.
672
673 Wishbone is an open hardware SoC bus commonly used in FPGA
674 designs. Bus access can be serialized using the Etherbone
675 protocol <http://www.ohwr.org/projects/etherbone-core>.
676
677 This driver is intended to be used with devices which attach
678 their internal Wishbone bus to a USB serial interface using
679 the Etherbone protocol. A userspace library is required to
680 speak the protocol made available by this driver as ttyUSBx.
681
682 To compile this driver as a module, choose M here: the
683 module will be called wishbone-serial.
684
685config USB_SERIAL_ZTE
686 tristate "ZTE USB serial driver"
687 help
688 Say Y here if you want to use a ZTE USB to serial device.
689
690 To compile this driver as a module, choose M here: the
691 module will be called zte.
692
693config USB_SERIAL_SSU100
694 tristate "USB Quatech SSU-100 Single Port Serial Driver"
695 help
696 Say Y here if you want to use the Quatech SSU-100 single
697 port usb to serial adapter.
698
699 To compile this driver as a module, choose M here: the
700 module will be called ssu100.
701
702config USB_SERIAL_QT2
703 tristate "USB Quatech Serial Driver for USB 2 devices"
704 help
705 Say Y here if you want to use the Quatech USB 2
706 serial adapters.
707
708 To compile this driver as a module, choose M here: the
709 module will be called quatech-serial.
710
711config USB_SERIAL_DEBUG
712 tristate "USB Debugging Device"
713 help
714 Say Y here if you have a USB debugging device used to receive
715 debugging data from another machine. The most common of these
716 devices is the NetChip TurboCONNECT device.
717
718 To compile this driver as a module, choose M here: the
719 module will be called usb-debug.
720
721endif # USB_SERIAL