Loading...
1#
2# Drm device configuration
3#
4# This driver provides support for the
5# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
6#
7menuconfig DRM
8 tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
9 depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && MMU && HAS_DMA
10 select HDMI
11 select FB_CMDLINE
12 select I2C
13 select I2C_ALGOBIT
14 select DMA_SHARED_BUFFER
15 help
16 Kernel-level support for the Direct Rendering Infrastructure (DRI)
17 introduced in XFree86 4.0. If you say Y here, you need to select
18 the module that's right for your graphics card from the list below.
19 These modules provide support for synchronization, security, and
20 DMA transfers. Please see <http://dri.sourceforge.net/> for more
21 details. You should also select and configure AGP
22 (/dev/agpgart) support if it is available for your platform.
23
24config DRM_MIPI_DSI
25 bool
26 depends on DRM
27
28config DRM_DP_AUX_CHARDEV
29 bool "DRM DP AUX Interface"
30 depends on DRM
31 help
32 Choose this option to enable a /dev/drm_dp_auxN node that allows to
33 read and write values to arbitrary DPCD registers on the DP aux
34 channel.
35
36config DRM_KMS_HELPER
37 tristate
38 depends on DRM
39 help
40 CRTC helpers for KMS drivers.
41
42config DRM_KMS_FB_HELPER
43 bool
44 depends on DRM_KMS_HELPER
45 select FB
46 select FRAMEBUFFER_CONSOLE if !EXPERT
47 select FRAMEBUFFER_CONSOLE_DETECT_PRIMARY if FRAMEBUFFER_CONSOLE
48 select FB_SYS_FOPS
49 select FB_SYS_FILLRECT
50 select FB_SYS_COPYAREA
51 select FB_SYS_IMAGEBLIT
52 select FB_CFB_FILLRECT
53 select FB_CFB_COPYAREA
54 select FB_CFB_IMAGEBLIT
55 help
56 FBDEV helpers for KMS drivers.
57
58config DRM_FBDEV_EMULATION
59 bool "Enable legacy fbdev support for your modesetting driver"
60 depends on DRM
61 select DRM_KMS_HELPER
62 select DRM_KMS_FB_HELPER
63 default y
64 help
65 Choose this option if you have a need for the legacy fbdev
66 support. Note that this support also provides the linux console
67 support on top of your modesetting driver.
68
69 If in doubt, say "Y".
70
71config DRM_LOAD_EDID_FIRMWARE
72 bool "Allow to specify an EDID data set instead of probing for it"
73 depends on DRM_KMS_HELPER
74 help
75 Say Y here, if you want to use EDID data to be loaded from the
76 /lib/firmware directory or one of the provided built-in
77 data sets. This may be necessary, if the graphics adapter or
78 monitor are unable to provide appropriate EDID data. Since this
79 feature is provided as a workaround for broken hardware, the
80 default case is N. Details and instructions how to build your own
81 EDID data are given in Documentation/EDID/HOWTO.txt.
82
83config DRM_TTM
84 tristate
85 depends on DRM
86 help
87 GPU memory management subsystem for devices with multiple
88 GPU memory types. Will be enabled automatically if a device driver
89 uses it.
90
91config DRM_GEM_CMA_HELPER
92 bool
93 depends on DRM
94 help
95 Choose this if you need the GEM CMA helper functions
96
97config DRM_KMS_CMA_HELPER
98 bool
99 depends on DRM
100 select DRM_GEM_CMA_HELPER
101 select DRM_KMS_FB_HELPER
102 select FB_SYS_FILLRECT
103 select FB_SYS_COPYAREA
104 select FB_SYS_IMAGEBLIT
105 help
106 Choose this if you need the KMS CMA helper functions
107
108source "drivers/gpu/drm/i2c/Kconfig"
109
110config DRM_TDFX
111 tristate "3dfx Banshee/Voodoo3+"
112 depends on DRM && PCI
113 help
114 Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
115 graphics card. If M is selected, the module will be called tdfx.
116
117source "drivers/gpu/drm/arm/Kconfig"
118
119config DRM_R128
120 tristate "ATI Rage 128"
121 depends on DRM && PCI
122 select FW_LOADER
123 help
124 Choose this option if you have an ATI Rage 128 graphics card. If M
125 is selected, the module will be called r128. AGP support for
126 this card is strongly suggested (unless you have a PCI version).
127
128config DRM_RADEON
129 tristate "ATI Radeon"
130 depends on DRM && PCI
131 select FB_CFB_FILLRECT
132 select FB_CFB_COPYAREA
133 select FB_CFB_IMAGEBLIT
134 select FW_LOADER
135 select DRM_KMS_HELPER
136 select DRM_KMS_FB_HELPER
137 select DRM_TTM
138 select POWER_SUPPLY
139 select HWMON
140 select BACKLIGHT_CLASS_DEVICE
141 select BACKLIGHT_LCD_SUPPORT
142 select INTERVAL_TREE
143 help
144 Choose this option if you have an ATI Radeon graphics card. There
145 are both PCI and AGP versions. You don't need to choose this to
146 run the Radeon in plain VGA mode.
147
148 If M is selected, the module will be called radeon.
149
150source "drivers/gpu/drm/radeon/Kconfig"
151
152config DRM_AMDGPU
153 tristate "AMD GPU"
154 depends on DRM && PCI
155 select FB_CFB_FILLRECT
156 select FB_CFB_COPYAREA
157 select FB_CFB_IMAGEBLIT
158 select FW_LOADER
159 select DRM_KMS_HELPER
160 select DRM_KMS_FB_HELPER
161 select DRM_TTM
162 select POWER_SUPPLY
163 select HWMON
164 select BACKLIGHT_CLASS_DEVICE
165 select BACKLIGHT_LCD_SUPPORT
166 select INTERVAL_TREE
167 help
168 Choose this option if you have a recent AMD Radeon graphics card.
169
170 If M is selected, the module will be called amdgpu.
171
172source "drivers/gpu/drm/amd/amdgpu/Kconfig"
173source "drivers/gpu/drm/amd/powerplay/Kconfig"
174
175source "drivers/gpu/drm/amd/acp/Kconfig"
176
177source "drivers/gpu/drm/nouveau/Kconfig"
178
179config DRM_I810
180 tristate "Intel I810"
181 # !PREEMPT because of missing ioctl locking
182 depends on DRM && AGP && AGP_INTEL && (!PREEMPT || BROKEN)
183 help
184 Choose this option if you have an Intel I810 graphics card. If M is
185 selected, the module will be called i810. AGP support is required
186 for this driver to work.
187
188source "drivers/gpu/drm/i915/Kconfig"
189
190config DRM_MGA
191 tristate "Matrox g200/g400"
192 depends on DRM && PCI
193 select FW_LOADER
194 help
195 Choose this option if you have a Matrox G200, G400 or G450 graphics
196 card. If M is selected, the module will be called mga. AGP
197 support is required for this driver to work.
198
199config DRM_SIS
200 tristate "SiS video cards"
201 depends on DRM && AGP
202 depends on FB_SIS || FB_SIS=n
203 help
204 Choose this option if you have a SiS 630 or compatible video
205 chipset. If M is selected the module will be called sis. AGP
206 support is required for this driver to work.
207
208config DRM_VIA
209 tristate "Via unichrome video cards"
210 depends on DRM && PCI
211 help
212 Choose this option if you have a Via unichrome or compatible video
213 chipset. If M is selected the module will be called via.
214
215config DRM_SAVAGE
216 tristate "Savage video cards"
217 depends on DRM && PCI
218 help
219 Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
220 chipset. If M is selected the module will be called savage.
221
222config DRM_VGEM
223 tristate "Virtual GEM provider"
224 depends on DRM
225 help
226 Choose this option to get a virtual graphics memory manager,
227 as used by Mesa's software renderer for enhanced performance.
228 If M is selected the module will be called vgem.
229
230
231source "drivers/gpu/drm/exynos/Kconfig"
232
233source "drivers/gpu/drm/rockchip/Kconfig"
234
235source "drivers/gpu/drm/vmwgfx/Kconfig"
236
237source "drivers/gpu/drm/gma500/Kconfig"
238
239source "drivers/gpu/drm/udl/Kconfig"
240
241source "drivers/gpu/drm/ast/Kconfig"
242
243source "drivers/gpu/drm/mgag200/Kconfig"
244
245source "drivers/gpu/drm/cirrus/Kconfig"
246
247source "drivers/gpu/drm/armada/Kconfig"
248
249source "drivers/gpu/drm/atmel-hlcdc/Kconfig"
250
251source "drivers/gpu/drm/rcar-du/Kconfig"
252
253source "drivers/gpu/drm/shmobile/Kconfig"
254
255source "drivers/gpu/drm/omapdrm/Kconfig"
256
257source "drivers/gpu/drm/tilcdc/Kconfig"
258
259source "drivers/gpu/drm/qxl/Kconfig"
260
261source "drivers/gpu/drm/bochs/Kconfig"
262
263source "drivers/gpu/drm/virtio/Kconfig"
264
265source "drivers/gpu/drm/msm/Kconfig"
266
267source "drivers/gpu/drm/fsl-dcu/Kconfig"
268
269source "drivers/gpu/drm/tegra/Kconfig"
270
271source "drivers/gpu/drm/panel/Kconfig"
272
273source "drivers/gpu/drm/bridge/Kconfig"
274
275source "drivers/gpu/drm/sti/Kconfig"
276
277source "drivers/gpu/drm/amd/amdkfd/Kconfig"
278
279source "drivers/gpu/drm/imx/Kconfig"
280
281source "drivers/gpu/drm/vc4/Kconfig"
282
283source "drivers/gpu/drm/etnaviv/Kconfig"
1#
2# Drm device configuration
3#
4# This driver provides support for the
5# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
6#
7menuconfig DRM
8 tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
9 depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && MMU && HAS_DMA
10 select HDMI
11 select I2C
12 select I2C_ALGOBIT
13 select DMA_SHARED_BUFFER
14 help
15 Kernel-level support for the Direct Rendering Infrastructure (DRI)
16 introduced in XFree86 4.0. If you say Y here, you need to select
17 the module that's right for your graphics card from the list below.
18 These modules provide support for synchronization, security, and
19 DMA transfers. Please see <http://dri.sourceforge.net/> for more
20 details. You should also select and configure AGP
21 (/dev/agpgart) support if it is available for your platform.
22
23config DRM_MIPI_DSI
24 bool
25 depends on DRM
26
27config DRM_USB
28 tristate
29 depends on DRM
30 depends on USB_SUPPORT && USB_ARCH_HAS_HCD
31 select USB
32
33config DRM_KMS_HELPER
34 tristate
35 depends on DRM
36 help
37 CRTC helpers for KMS drivers.
38
39config DRM_KMS_FB_HELPER
40 bool
41 depends on DRM_KMS_HELPER
42 select FB
43 select FRAMEBUFFER_CONSOLE if !EXPERT
44 select FRAMEBUFFER_CONSOLE_DETECT_PRIMARY if FRAMEBUFFER_CONSOLE
45 help
46 FBDEV helpers for KMS drivers.
47
48config DRM_LOAD_EDID_FIRMWARE
49 bool "Allow to specify an EDID data set instead of probing for it"
50 depends on DRM_KMS_HELPER
51 help
52 Say Y here, if you want to use EDID data to be loaded from the
53 /lib/firmware directory or one of the provided built-in
54 data sets. This may be necessary, if the graphics adapter or
55 monitor are unable to provide appropriate EDID data. Since this
56 feature is provided as a workaround for broken hardware, the
57 default case is N. Details and instructions how to build your own
58 EDID data are given in Documentation/EDID/HOWTO.txt.
59
60config DRM_TTM
61 tristate
62 depends on DRM
63 help
64 GPU memory management subsystem for devices with multiple
65 GPU memory types. Will be enabled automatically if a device driver
66 uses it.
67
68config DRM_GEM_CMA_HELPER
69 bool
70 depends on DRM
71 help
72 Choose this if you need the GEM CMA helper functions
73
74config DRM_KMS_CMA_HELPER
75 bool
76 select DRM_GEM_CMA_HELPER
77 select DRM_KMS_FB_HELPER
78 select FB_SYS_FILLRECT
79 select FB_SYS_COPYAREA
80 select FB_SYS_IMAGEBLIT
81 help
82 Choose this if you need the KMS CMA helper functions
83
84source "drivers/gpu/drm/i2c/Kconfig"
85
86config DRM_TDFX
87 tristate "3dfx Banshee/Voodoo3+"
88 depends on DRM && PCI
89 help
90 Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
91 graphics card. If M is selected, the module will be called tdfx.
92
93config DRM_R128
94 tristate "ATI Rage 128"
95 depends on DRM && PCI
96 select FW_LOADER
97 help
98 Choose this option if you have an ATI Rage 128 graphics card. If M
99 is selected, the module will be called r128. AGP support for
100 this card is strongly suggested (unless you have a PCI version).
101
102config DRM_RADEON
103 tristate "ATI Radeon"
104 depends on DRM && PCI
105 select FB_CFB_FILLRECT
106 select FB_CFB_COPYAREA
107 select FB_CFB_IMAGEBLIT
108 select FW_LOADER
109 select DRM_KMS_HELPER
110 select DRM_KMS_FB_HELPER
111 select DRM_TTM
112 select POWER_SUPPLY
113 select HWMON
114 select BACKLIGHT_CLASS_DEVICE
115 help
116 Choose this option if you have an ATI Radeon graphics card. There
117 are both PCI and AGP versions. You don't need to choose this to
118 run the Radeon in plain VGA mode.
119
120 If M is selected, the module will be called radeon.
121
122source "drivers/gpu/drm/radeon/Kconfig"
123
124source "drivers/gpu/drm/nouveau/Kconfig"
125
126config DRM_I810
127 tristate "Intel I810"
128 # !PREEMPT because of missing ioctl locking
129 depends on DRM && AGP && AGP_INTEL && (!PREEMPT || BROKEN)
130 help
131 Choose this option if you have an Intel I810 graphics card. If M is
132 selected, the module will be called i810. AGP support is required
133 for this driver to work.
134
135source "drivers/gpu/drm/i915/Kconfig"
136
137config DRM_MGA
138 tristate "Matrox g200/g400"
139 depends on DRM && PCI
140 select FW_LOADER
141 help
142 Choose this option if you have a Matrox G200, G400 or G450 graphics
143 card. If M is selected, the module will be called mga. AGP
144 support is required for this driver to work.
145
146config DRM_SIS
147 tristate "SiS video cards"
148 depends on DRM && AGP
149 depends on FB_SIS || FB_SIS=n
150 help
151 Choose this option if you have a SiS 630 or compatible video
152 chipset. If M is selected the module will be called sis. AGP
153 support is required for this driver to work.
154
155config DRM_VIA
156 tristate "Via unichrome video cards"
157 depends on DRM && PCI
158 help
159 Choose this option if you have a Via unichrome or compatible video
160 chipset. If M is selected the module will be called via.
161
162config DRM_SAVAGE
163 tristate "Savage video cards"
164 depends on DRM && PCI
165 help
166 Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
167 chipset. If M is selected the module will be called savage.
168
169source "drivers/gpu/drm/exynos/Kconfig"
170
171source "drivers/gpu/drm/vmwgfx/Kconfig"
172
173source "drivers/gpu/drm/gma500/Kconfig"
174
175source "drivers/gpu/drm/udl/Kconfig"
176
177source "drivers/gpu/drm/ast/Kconfig"
178
179source "drivers/gpu/drm/mgag200/Kconfig"
180
181source "drivers/gpu/drm/cirrus/Kconfig"
182
183source "drivers/gpu/drm/armada/Kconfig"
184
185source "drivers/gpu/drm/rcar-du/Kconfig"
186
187source "drivers/gpu/drm/shmobile/Kconfig"
188
189source "drivers/gpu/drm/omapdrm/Kconfig"
190
191source "drivers/gpu/drm/tilcdc/Kconfig"
192
193source "drivers/gpu/drm/qxl/Kconfig"
194
195source "drivers/gpu/drm/bochs/Kconfig"
196
197source "drivers/gpu/drm/msm/Kconfig"
198
199source "drivers/gpu/drm/tegra/Kconfig"
200
201source "drivers/gpu/drm/panel/Kconfig"
202
203source "drivers/gpu/drm/bridge/Kconfig"