Loading...
1#
2# Drm device configuration
3#
4# This driver provides support for the
5# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
6#
7menuconfig DRM
8 tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
9 depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && MMU && HAS_DMA
10 select HDMI
11 select FB_CMDLINE
12 select I2C
13 select I2C_ALGOBIT
14 select DMA_SHARED_BUFFER
15 help
16 Kernel-level support for the Direct Rendering Infrastructure (DRI)
17 introduced in XFree86 4.0. If you say Y here, you need to select
18 the module that's right for your graphics card from the list below.
19 These modules provide support for synchronization, security, and
20 DMA transfers. Please see <http://dri.sourceforge.net/> for more
21 details. You should also select and configure AGP
22 (/dev/agpgart) support if it is available for your platform.
23
24config DRM_MIPI_DSI
25 bool
26 depends on DRM
27
28config DRM_DP_AUX_CHARDEV
29 bool "DRM DP AUX Interface"
30 depends on DRM
31 help
32 Choose this option to enable a /dev/drm_dp_auxN node that allows to
33 read and write values to arbitrary DPCD registers on the DP aux
34 channel.
35
36config DRM_KMS_HELPER
37 tristate
38 depends on DRM
39 help
40 CRTC helpers for KMS drivers.
41
42config DRM_KMS_FB_HELPER
43 bool
44 depends on DRM_KMS_HELPER
45 select FB
46 select FRAMEBUFFER_CONSOLE if !EXPERT
47 select FRAMEBUFFER_CONSOLE_DETECT_PRIMARY if FRAMEBUFFER_CONSOLE
48 select FB_SYS_FOPS
49 select FB_SYS_FILLRECT
50 select FB_SYS_COPYAREA
51 select FB_SYS_IMAGEBLIT
52 select FB_CFB_FILLRECT
53 select FB_CFB_COPYAREA
54 select FB_CFB_IMAGEBLIT
55 help
56 FBDEV helpers for KMS drivers.
57
58config DRM_FBDEV_EMULATION
59 bool "Enable legacy fbdev support for your modesetting driver"
60 depends on DRM
61 select DRM_KMS_HELPER
62 select DRM_KMS_FB_HELPER
63 default y
64 help
65 Choose this option if you have a need for the legacy fbdev
66 support. Note that this support also provides the linux console
67 support on top of your modesetting driver.
68
69 If in doubt, say "Y".
70
71config DRM_LOAD_EDID_FIRMWARE
72 bool "Allow to specify an EDID data set instead of probing for it"
73 depends on DRM_KMS_HELPER
74 help
75 Say Y here, if you want to use EDID data to be loaded from the
76 /lib/firmware directory or one of the provided built-in
77 data sets. This may be necessary, if the graphics adapter or
78 monitor are unable to provide appropriate EDID data. Since this
79 feature is provided as a workaround for broken hardware, the
80 default case is N. Details and instructions how to build your own
81 EDID data are given in Documentation/EDID/HOWTO.txt.
82
83config DRM_TTM
84 tristate
85 depends on DRM
86 help
87 GPU memory management subsystem for devices with multiple
88 GPU memory types. Will be enabled automatically if a device driver
89 uses it.
90
91config DRM_GEM_CMA_HELPER
92 bool
93 depends on DRM
94 help
95 Choose this if you need the GEM CMA helper functions
96
97config DRM_KMS_CMA_HELPER
98 bool
99 depends on DRM
100 select DRM_GEM_CMA_HELPER
101 select DRM_KMS_FB_HELPER
102 select FB_SYS_FILLRECT
103 select FB_SYS_COPYAREA
104 select FB_SYS_IMAGEBLIT
105 help
106 Choose this if you need the KMS CMA helper functions
107
108source "drivers/gpu/drm/i2c/Kconfig"
109
110config DRM_TDFX
111 tristate "3dfx Banshee/Voodoo3+"
112 depends on DRM && PCI
113 help
114 Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
115 graphics card. If M is selected, the module will be called tdfx.
116
117source "drivers/gpu/drm/arm/Kconfig"
118
119config DRM_R128
120 tristate "ATI Rage 128"
121 depends on DRM && PCI
122 select FW_LOADER
123 help
124 Choose this option if you have an ATI Rage 128 graphics card. If M
125 is selected, the module will be called r128. AGP support for
126 this card is strongly suggested (unless you have a PCI version).
127
128config DRM_RADEON
129 tristate "ATI Radeon"
130 depends on DRM && PCI
131 select FB_CFB_FILLRECT
132 select FB_CFB_COPYAREA
133 select FB_CFB_IMAGEBLIT
134 select FW_LOADER
135 select DRM_KMS_HELPER
136 select DRM_KMS_FB_HELPER
137 select DRM_TTM
138 select POWER_SUPPLY
139 select HWMON
140 select BACKLIGHT_CLASS_DEVICE
141 select BACKLIGHT_LCD_SUPPORT
142 select INTERVAL_TREE
143 help
144 Choose this option if you have an ATI Radeon graphics card. There
145 are both PCI and AGP versions. You don't need to choose this to
146 run the Radeon in plain VGA mode.
147
148 If M is selected, the module will be called radeon.
149
150source "drivers/gpu/drm/radeon/Kconfig"
151
152config DRM_AMDGPU
153 tristate "AMD GPU"
154 depends on DRM && PCI
155 select FB_CFB_FILLRECT
156 select FB_CFB_COPYAREA
157 select FB_CFB_IMAGEBLIT
158 select FW_LOADER
159 select DRM_KMS_HELPER
160 select DRM_KMS_FB_HELPER
161 select DRM_TTM
162 select POWER_SUPPLY
163 select HWMON
164 select BACKLIGHT_CLASS_DEVICE
165 select BACKLIGHT_LCD_SUPPORT
166 select INTERVAL_TREE
167 help
168 Choose this option if you have a recent AMD Radeon graphics card.
169
170 If M is selected, the module will be called amdgpu.
171
172source "drivers/gpu/drm/amd/amdgpu/Kconfig"
173source "drivers/gpu/drm/amd/powerplay/Kconfig"
174
175source "drivers/gpu/drm/amd/acp/Kconfig"
176
177source "drivers/gpu/drm/nouveau/Kconfig"
178
179config DRM_I810
180 tristate "Intel I810"
181 # !PREEMPT because of missing ioctl locking
182 depends on DRM && AGP && AGP_INTEL && (!PREEMPT || BROKEN)
183 help
184 Choose this option if you have an Intel I810 graphics card. If M is
185 selected, the module will be called i810. AGP support is required
186 for this driver to work.
187
188source "drivers/gpu/drm/i915/Kconfig"
189
190config DRM_MGA
191 tristate "Matrox g200/g400"
192 depends on DRM && PCI
193 select FW_LOADER
194 help
195 Choose this option if you have a Matrox G200, G400 or G450 graphics
196 card. If M is selected, the module will be called mga. AGP
197 support is required for this driver to work.
198
199config DRM_SIS
200 tristate "SiS video cards"
201 depends on DRM && AGP
202 depends on FB_SIS || FB_SIS=n
203 help
204 Choose this option if you have a SiS 630 or compatible video
205 chipset. If M is selected the module will be called sis. AGP
206 support is required for this driver to work.
207
208config DRM_VIA
209 tristate "Via unichrome video cards"
210 depends on DRM && PCI
211 help
212 Choose this option if you have a Via unichrome or compatible video
213 chipset. If M is selected the module will be called via.
214
215config DRM_SAVAGE
216 tristate "Savage video cards"
217 depends on DRM && PCI
218 help
219 Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
220 chipset. If M is selected the module will be called savage.
221
222config DRM_VGEM
223 tristate "Virtual GEM provider"
224 depends on DRM
225 help
226 Choose this option to get a virtual graphics memory manager,
227 as used by Mesa's software renderer for enhanced performance.
228 If M is selected the module will be called vgem.
229
230
231source "drivers/gpu/drm/exynos/Kconfig"
232
233source "drivers/gpu/drm/rockchip/Kconfig"
234
235source "drivers/gpu/drm/vmwgfx/Kconfig"
236
237source "drivers/gpu/drm/gma500/Kconfig"
238
239source "drivers/gpu/drm/udl/Kconfig"
240
241source "drivers/gpu/drm/ast/Kconfig"
242
243source "drivers/gpu/drm/mgag200/Kconfig"
244
245source "drivers/gpu/drm/cirrus/Kconfig"
246
247source "drivers/gpu/drm/armada/Kconfig"
248
249source "drivers/gpu/drm/atmel-hlcdc/Kconfig"
250
251source "drivers/gpu/drm/rcar-du/Kconfig"
252
253source "drivers/gpu/drm/shmobile/Kconfig"
254
255source "drivers/gpu/drm/omapdrm/Kconfig"
256
257source "drivers/gpu/drm/tilcdc/Kconfig"
258
259source "drivers/gpu/drm/qxl/Kconfig"
260
261source "drivers/gpu/drm/bochs/Kconfig"
262
263source "drivers/gpu/drm/virtio/Kconfig"
264
265source "drivers/gpu/drm/msm/Kconfig"
266
267source "drivers/gpu/drm/fsl-dcu/Kconfig"
268
269source "drivers/gpu/drm/tegra/Kconfig"
270
271source "drivers/gpu/drm/panel/Kconfig"
272
273source "drivers/gpu/drm/bridge/Kconfig"
274
275source "drivers/gpu/drm/sti/Kconfig"
276
277source "drivers/gpu/drm/amd/amdkfd/Kconfig"
278
279source "drivers/gpu/drm/imx/Kconfig"
280
281source "drivers/gpu/drm/vc4/Kconfig"
282
283source "drivers/gpu/drm/etnaviv/Kconfig"
1#
2# Drm device configuration
3#
4# This driver provides support for the
5# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
6#
7menuconfig DRM
8 tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
9 depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && MMU
10 select I2C
11 select I2C_ALGOBIT
12 select DMA_SHARED_BUFFER
13 help
14 Kernel-level support for the Direct Rendering Infrastructure (DRI)
15 introduced in XFree86 4.0. If you say Y here, you need to select
16 the module that's right for your graphics card from the list below.
17 These modules provide support for synchronization, security, and
18 DMA transfers. Please see <http://dri.sourceforge.net/> for more
19 details. You should also select and configure AGP
20 (/dev/agpgart) support if it is available for your platform.
21
22config DRM_USB
23 tristate
24 depends on DRM
25 select USB
26
27config DRM_KMS_HELPER
28 tristate
29 depends on DRM
30 select FB
31 select FRAMEBUFFER_CONSOLE if !EXPERT
32 select FRAMEBUFFER_CONSOLE_DETECT_PRIMARY if FRAMEBUFFER_CONSOLE
33 help
34 FB and CRTC helpers for KMS drivers.
35
36config DRM_LOAD_EDID_FIRMWARE
37 bool "Allow to specify an EDID data set instead of probing for it"
38 depends on DRM_KMS_HELPER
39 help
40 Say Y here, if you want to use EDID data to be loaded from the
41 /lib/firmware directory or one of the provided built-in
42 data sets. This may be necessary, if the graphics adapter or
43 monitor are unable to provide appropriate EDID data. Since this
44 feature is provided as a workaround for broken hardware, the
45 default case is N. Details and instructions how to build your own
46 EDID data are given in Documentation/EDID/HOWTO.txt.
47
48config DRM_TTM
49 tristate
50 depends on DRM
51 help
52 GPU memory management subsystem for devices with multiple
53 GPU memory types. Will be enabled automatically if a device driver
54 uses it.
55
56config DRM_TDFX
57 tristate "3dfx Banshee/Voodoo3+"
58 depends on DRM && PCI
59 help
60 Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
61 graphics card. If M is selected, the module will be called tdfx.
62
63config DRM_R128
64 tristate "ATI Rage 128"
65 depends on DRM && PCI
66 select FW_LOADER
67 help
68 Choose this option if you have an ATI Rage 128 graphics card. If M
69 is selected, the module will be called r128. AGP support for
70 this card is strongly suggested (unless you have a PCI version).
71
72config DRM_RADEON
73 tristate "ATI Radeon"
74 depends on DRM && PCI
75 select FB_CFB_FILLRECT
76 select FB_CFB_COPYAREA
77 select FB_CFB_IMAGEBLIT
78 select FW_LOADER
79 select DRM_KMS_HELPER
80 select DRM_TTM
81 select POWER_SUPPLY
82 select HWMON
83 help
84 Choose this option if you have an ATI Radeon graphics card. There
85 are both PCI and AGP versions. You don't need to choose this to
86 run the Radeon in plain VGA mode.
87
88 If M is selected, the module will be called radeon.
89
90source "drivers/gpu/drm/radeon/Kconfig"
91
92source "drivers/gpu/drm/nouveau/Kconfig"
93
94config DRM_I810
95 tristate "Intel I810"
96 # !PREEMPT because of missing ioctl locking
97 depends on DRM && AGP && AGP_INTEL && (!PREEMPT || BROKEN)
98 help
99 Choose this option if you have an Intel I810 graphics card. If M is
100 selected, the module will be called i810. AGP support is required
101 for this driver to work.
102
103config DRM_I915
104 tristate "Intel 8xx/9xx/G3x/G4x/HD Graphics"
105 depends on DRM
106 depends on AGP
107 depends on AGP_INTEL
108 # we need shmfs for the swappable backing store, and in particular
109 # the shmem_readpage() which depends upon tmpfs
110 select SHMEM
111 select TMPFS
112 select DRM_KMS_HELPER
113 select FB_CFB_FILLRECT
114 select FB_CFB_COPYAREA
115 select FB_CFB_IMAGEBLIT
116 # i915 depends on ACPI_VIDEO when ACPI is enabled
117 # but for select to work, need to select ACPI_VIDEO's dependencies, ick
118 select BACKLIGHT_LCD_SUPPORT if ACPI
119 select BACKLIGHT_CLASS_DEVICE if ACPI
120 select VIDEO_OUTPUT_CONTROL if ACPI
121 select INPUT if ACPI
122 select ACPI_VIDEO if ACPI
123 select ACPI_BUTTON if ACPI
124 help
125 Choose this option if you have a system that has "Intel Graphics
126 Media Accelerator" or "HD Graphics" integrated graphics,
127 including 830M, 845G, 852GM, 855GM, 865G, 915G, 945G, 965G,
128 G35, G41, G43, G45 chipsets and Celeron, Pentium, Core i3,
129 Core i5, Core i7 as well as Atom CPUs with integrated graphics.
130 If M is selected, the module will be called i915. AGP support
131 is required for this driver to work. This driver is used by
132 the Intel driver in X.org 6.8 and XFree86 4.4 and above. It
133 replaces the older i830 module that supported a subset of the
134 hardware in older X.org releases.
135
136 Note that the older i810/i815 chipsets require the use of the
137 i810 driver instead, and the Atom z5xx series has an entirely
138 different implementation.
139
140config DRM_I915_KMS
141 bool "Enable modesetting on intel by default"
142 depends on DRM_I915
143 help
144 Choose this option if you want kernel modesetting enabled by default,
145 and you have a new enough userspace to support this. Running old
146 userspaces with this enabled will cause pain. Note that this causes
147 the driver to bind to PCI devices, which precludes loading things
148 like intelfb.
149
150config DRM_MGA
151 tristate "Matrox g200/g400"
152 depends on DRM && PCI
153 select FW_LOADER
154 help
155 Choose this option if you have a Matrox G200, G400 or G450 graphics
156 card. If M is selected, the module will be called mga. AGP
157 support is required for this driver to work.
158
159config DRM_SIS
160 tristate "SiS video cards"
161 depends on DRM && AGP
162 depends on FB_SIS || FB_SIS=n
163 help
164 Choose this option if you have a SiS 630 or compatible video
165 chipset. If M is selected the module will be called sis. AGP
166 support is required for this driver to work.
167
168config DRM_VIA
169 tristate "Via unichrome video cards"
170 depends on DRM && PCI
171 help
172 Choose this option if you have a Via unichrome or compatible video
173 chipset. If M is selected the module will be called via.
174
175config DRM_SAVAGE
176 tristate "Savage video cards"
177 depends on DRM && PCI
178 help
179 Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
180 chipset. If M is selected the module will be called savage.
181
182source "drivers/gpu/drm/exynos/Kconfig"
183
184source "drivers/gpu/drm/vmwgfx/Kconfig"
185
186source "drivers/gpu/drm/gma500/Kconfig"
187
188source "drivers/gpu/drm/udl/Kconfig"
189
190source "drivers/gpu/drm/ast/Kconfig"
191
192source "drivers/gpu/drm/mgag200/Kconfig"
193
194source "drivers/gpu/drm/cirrus/Kconfig"