Loading...
1#
2# USB Serial device configuration
3#
4
5menuconfig USB_SERIAL
6 tristate "USB Serial Converter support"
7 depends on TTY
8 ---help---
9 Say Y here if you have a USB device that provides normal serial
10 ports, or acts like a serial device, and you want to connect it to
11 your USB bus.
12
13 Please read <file:Documentation/usb/usb-serial.txt> for more
14 information on the specifics of the different devices that are
15 supported, and on how to use them.
16
17 To compile this driver as a module, choose M here: the
18 module will be called usbserial.
19
20if USB_SERIAL
21
22config USB_SERIAL_CONSOLE
23 bool "USB Serial Console device support"
24 depends on USB_SERIAL=y
25 ---help---
26 If you say Y here, it will be possible to use a USB to serial
27 converter port as the system console (the system console is the
28 device which receives all kernel messages and warnings and which
29 allows logins in single user mode). This could be useful if some
30 terminal or printer is connected to that serial port.
31
32 Even if you say Y here, the currently visible virtual console
33 (/dev/tty0) will still be used as the system console by default, but
34 you can alter that using a kernel command line option such as
35 "console=ttyUSB0". (Try "man bootparam" or see the documentation of
36 your boot loader (lilo or loadlin) about how to pass options to the
37 kernel at boot time.)
38
39 If you don't have a VGA card installed and you say Y here, the
40 kernel will automatically use the first USB to serial converter
41 port, /dev/ttyUSB0, as system console.
42
43 If unsure, say N.
44
45config USB_SERIAL_GENERIC
46 bool "USB Generic Serial Driver"
47 help
48 Say Y here if you want to use the generic USB serial driver. Please
49 read <file:Documentation/usb/usb-serial.txt> for more information on
50 using this driver. It is recommended that the "USB Serial converter
51 support" be compiled as a module for this driver to be used
52 properly.
53
54config USB_SERIAL_SIMPLE
55 tristate "USB Serial Simple Driver"
56 help
57 Say Y here to use the USB serial "simple" driver. This driver
58 handles a wide range of very simple devices, all in one
59 driver. Specifically, it supports:
60 - Suunto ANT+ USB device.
61 - Medtronic CareLink USB device
62 - Fundamental Software dongle.
63 - Google USB serial devices
64 - HP4x calculators
65 - a number of Motorola phones
66 - Novatel Wireless GPS receivers
67 - Siemens USB/MPI adapter.
68 - ViVOtech ViVOpay USB device.
69 - Infineon Modem Flashloader USB interface
70 - ZIO Motherboard USB serial interface
71
72 To compile this driver as a module, choose M here: the module
73 will be called usb-serial-simple.
74
75config USB_SERIAL_AIRCABLE
76 tristate "USB AIRcable Bluetooth Dongle Driver"
77 help
78 Say Y here if you want to use USB AIRcable Bluetooth Dongle.
79
80 To compile this driver as a module, choose M here: the module
81 will be called aircable.
82
83config USB_SERIAL_ARK3116
84 tristate "USB ARK Micro 3116 USB Serial Driver"
85 help
86 Say Y here if you want to use a ARK Micro 3116 USB to Serial
87 device.
88
89 To compile this driver as a module, choose M here: the
90 module will be called ark3116
91
92config USB_SERIAL_BELKIN
93 tristate "USB Belkin and Peracom Single Port Serial Driver"
94 help
95 Say Y here if you want to use a Belkin USB Serial single port
96 adaptor (F5U103 is one of the model numbers) or the Peracom single
97 port USB to serial adapter.
98
99 To compile this driver as a module, choose M here: the
100 module will be called belkin_sa.
101
102config USB_SERIAL_CH341
103 tristate "USB Winchiphead CH341 Single Port Serial Driver"
104 help
105 Say Y here if you want to use a Winchiphead CH341 single port
106 USB to serial adapter.
107
108 To compile this driver as a module, choose M here: the
109 module will be called ch341.
110
111config USB_SERIAL_WHITEHEAT
112 tristate "USB ConnectTech WhiteHEAT Serial Driver"
113 select USB_EZUSB_FX2
114 help
115 Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
116 USB to serial converter device.
117
118 To compile this driver as a module, choose M here: the
119 module will be called whiteheat.
120
121config USB_SERIAL_DIGI_ACCELEPORT
122 tristate "USB Digi International AccelePort USB Serial Driver"
123 ---help---
124 Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
125 2 port (plus parallel port) and 4 port USB serial converters. The
126 parallel port on the USB 2 appears as a third serial port on Linux.
127 The Digi Acceleport USB 8 is not yet supported by this driver.
128
129 This driver works under SMP with the usb-uhci driver. It does not
130 work under SMP with the uhci driver.
131
132 To compile this driver as a module, choose M here: the
133 module will be called digi_acceleport.
134
135config USB_SERIAL_CP210X
136 tristate "USB CP210x family of UART Bridge Controllers"
137 help
138 Say Y here if you want to use a CP2101/CP2102/CP2103 based USB
139 to RS232 converters.
140
141 To compile this driver as a module, choose M here: the
142 module will be called cp210x.
143
144config USB_SERIAL_CYPRESS_M8
145 tristate "USB Cypress M8 USB Serial Driver"
146 help
147 Say Y here if you want to use a device that contains the Cypress
148 USB to Serial microcontroller, such as the DeLorme Earthmate GPS.
149
150 Attempted SMP support... send bug reports!
151
152 Supported microcontrollers in the CY4601 family are:
153 CY7C63741 CY7C63742 CY7C63743 CY7C64013
154
155 To compile this driver as a module, choose M here: the
156 module will be called cypress_m8.
157
158config USB_SERIAL_EMPEG
159 tristate "USB Empeg empeg-car Mark I/II Driver"
160 help
161 Say Y here if you want to connect to your Empeg empeg-car Mark I/II
162 mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...}
163 device node. See <file:Documentation/usb/usb-serial.txt> for more
164 tidbits of information.
165
166 To compile this driver as a module, choose M here: the
167 module will be called empeg.
168
169config USB_SERIAL_FTDI_SIO
170 tristate "USB FTDI Single Port Serial Driver"
171 ---help---
172 Say Y here if you want to use a FTDI SIO single port USB to serial
173 converter device. The implementation I have is called the USC-1000.
174 This driver has also been tested with the 245 and 232 devices.
175
176 See <http://ftdi-usb-sio.sourceforge.net/> for more
177 information on this driver and the device.
178
179 To compile this driver as a module, choose M here: the
180 module will be called ftdi_sio.
181
182config USB_SERIAL_VISOR
183 tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
184 help
185 Say Y here if you want to connect to your HandSpring Visor, Palm
186 m500 or m505 through its USB docking station. See
187 <http://usbvisor.sourceforge.net/index.php3> for more information on using this
188 driver.
189
190 To compile this driver as a module, choose M here: the
191 module will be called visor.
192
193config USB_SERIAL_IPAQ
194 tristate "USB PocketPC PDA Driver"
195 help
196 Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
197 or any other PDA running Windows CE 3.0 or PocketPC 2002
198 using a USB cradle/cable. For information on using the driver,
199 read <file:Documentation/usb/usb-serial.txt>.
200
201 To compile this driver as a module, choose M here: the
202 module will be called ipaq.
203
204config USB_SERIAL_IR
205 tristate "USB IR Dongle Serial Driver"
206 help
207 Say Y here if you want to enable simple serial support for USB IrDA
208 devices. This is useful if you do not want to use the full IrDA
209 stack.
210
211 To compile this driver as a module, choose M here: the
212 module will be called ir-usb.
213
214config USB_SERIAL_EDGEPORT
215 tristate "USB Inside Out Edgeport Serial Driver"
216 ---help---
217 Say Y here if you want to use any of the following devices from
218 Inside Out Networks (Digi):
219 Edgeport/4
220 Rapidport/4
221 Edgeport/4t
222 Edgeport/2
223 Edgeport/4i
224 Edgeport/2i
225 Edgeport/421
226 Edgeport/21
227 Edgeport/8
228 Edgeport/8 Dual
229 Edgeport/2D8
230 Edgeport/4D8
231 Edgeport/8i
232 Edgeport/2 DIN
233 Edgeport/4 DIN
234 Edgeport/16 Dual
235
236 To compile this driver as a module, choose M here: the
237 module will be called io_edgeport.
238
239config USB_SERIAL_EDGEPORT_TI
240 tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
241 help
242 Say Y here if you want to use any of the devices from Inside Out
243 Networks (Digi) that are not supported by the io_edgeport driver.
244 This includes the Edgeport/1 device.
245
246 To compile this driver as a module, choose M here: the
247 module will be called io_ti.
248
249config USB_SERIAL_F81232
250 tristate "USB Fintek F81232 Single Port Serial Driver"
251 help
252 Say Y here if you want to use the Fintek F81232 single
253 port usb to serial adapter.
254
255 To compile this driver as a module, choose M here: the
256 module will be called f81232.
257
258config USB_SERIAL_GARMIN
259 tristate "USB Garmin GPS driver"
260 help
261 Say Y here if you want to connect to your Garmin GPS.
262 Should work with most Garmin GPS devices which have a native USB port.
263
264 See <http://sourceforge.net/projects/garmin-gps> for the latest
265 version of the driver.
266
267 To compile this driver as a module, choose M here: the
268 module will be called garmin_gps.
269
270config USB_SERIAL_IPW
271 tristate "USB IPWireless (3G UMTS TDD) Driver"
272 select USB_SERIAL_WWAN
273 help
274 Say Y here if you want to use a IPWireless USB modem such as
275 the ones supplied by Axity3G/Sentech South Africa.
276
277 To compile this driver as a module, choose M here: the
278 module will be called ipw.
279
280config USB_SERIAL_IUU
281 tristate "USB Infinity USB Unlimited Phoenix Driver"
282 help
283 Say Y here if you want to use a IUU in phoenix mode and get
284 an extra ttyUSBx device. More information available on
285 http://eczema.ecze.com/iuu_phoenix.html
286
287 To compile this driver as a module, choose M here: the
288 module will be called iuu_phoenix.o
289
290config USB_SERIAL_KEYSPAN_PDA
291 tristate "USB Keyspan PDA Single Port Serial Driver"
292 select USB_EZUSB_FX2
293 help
294 Say Y here if you want to use a Keyspan PDA single port USB to
295 serial converter device. This driver makes use of firmware
296 developed from scratch by Brian Warner.
297
298 To compile this driver as a module, choose M here: the
299 module will be called keyspan_pda.
300
301config USB_SERIAL_KEYSPAN
302 tristate "USB Keyspan USA-xxx Serial Driver"
303 select USB_EZUSB_FX2
304 ---help---
305 Say Y here if you want to use Keyspan USB to serial converter
306 devices. This driver makes use of Keyspan's official firmware
307 and was developed with their support. You must also include
308 firmware to support your particular device(s).
309
310 See <http://blemings.org/hugh/keyspan.html> for more information.
311
312 To compile this driver as a module, choose M here: the
313 module will be called keyspan.
314
315config USB_SERIAL_KEYSPAN_MPR
316 bool "USB Keyspan MPR Firmware"
317 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
318 help
319 Say Y here to include firmware for the Keyspan MPR converter.
320
321config USB_SERIAL_KEYSPAN_USA28
322 bool "USB Keyspan USA-28 Firmware"
323 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
324 help
325 Say Y here to include firmware for the USA-28 converter.
326
327config USB_SERIAL_KEYSPAN_USA28X
328 bool "USB Keyspan USA-28X Firmware"
329 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
330 help
331 Say Y here to include firmware for the USA-28X converter.
332 Be sure you have a USA-28X, there are also 28XA and 28XB
333 models, the label underneath has the actual part number.
334
335config USB_SERIAL_KEYSPAN_USA28XA
336 bool "USB Keyspan USA-28XA Firmware"
337 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
338 help
339 Say Y here to include firmware for the USA-28XA converter.
340 Be sure you have a USA-28XA, there are also 28X and 28XB
341 models, the label underneath has the actual part number.
342
343config USB_SERIAL_KEYSPAN_USA28XB
344 bool "USB Keyspan USA-28XB Firmware"
345 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
346 help
347 Say Y here to include firmware for the USA-28XB converter.
348 Be sure you have a USA-28XB, there are also 28X and 28XA
349 models, the label underneath has the actual part number.
350
351config USB_SERIAL_KEYSPAN_USA19
352 bool "USB Keyspan USA-19 Firmware"
353 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
354 help
355 Say Y here to include firmware for the USA-19 converter.
356
357config USB_SERIAL_KEYSPAN_USA18X
358 bool "USB Keyspan USA-18X Firmware"
359 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
360 help
361 Say Y here to include firmware for the USA-18X converter.
362
363config USB_SERIAL_KEYSPAN_USA19W
364 bool "USB Keyspan USA-19W Firmware"
365 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
366 help
367 Say Y here to include firmware for the USA-19W converter.
368
369config USB_SERIAL_KEYSPAN_USA19QW
370 bool "USB Keyspan USA-19QW Firmware"
371 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
372 help
373 Say Y here to include firmware for the USA-19QW converter.
374
375config USB_SERIAL_KEYSPAN_USA19QI
376 bool "USB Keyspan USA-19QI Firmware"
377 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
378 help
379 Say Y here to include firmware for the USA-19QI converter.
380
381config USB_SERIAL_KEYSPAN_USA49W
382 bool "USB Keyspan USA-49W Firmware"
383 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
384 help
385 Say Y here to include firmware for the USA-49W converter.
386
387config USB_SERIAL_KEYSPAN_USA49WLC
388 bool "USB Keyspan USA-49WLC Firmware"
389 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
390 help
391 Say Y here to include firmware for the USA-49WLC converter.
392
393config USB_SERIAL_KLSI
394 tristate "USB KL5KUSB105 (Palmconnect) Driver"
395 ---help---
396 Say Y here if you want to use a KL5KUSB105 - based single port
397 serial adapter. The most widely known -- and currently the only
398 tested -- device in this category is the PalmConnect USB Serial
399 adapter sold by Palm Inc. for use with their Palm III and Palm V
400 series PDAs.
401
402 Please read <file:Documentation/usb/usb-serial.txt> for more
403 information.
404
405 To compile this driver as a module, choose M here: the
406 module will be called kl5kusb105.
407
408config USB_SERIAL_KOBIL_SCT
409 tristate "USB KOBIL chipcard reader"
410 ---help---
411 Say Y here if you want to use one of the following KOBIL USB chipcard
412 readers:
413
414 - USB TWIN
415 - KAAN Standard Plus
416 - KAAN SIM
417 - SecOVID Reader Plus
418 - B1 Professional
419 - KAAN Professional
420
421 Note that you need a current CT-API.
422 To compile this driver as a module, choose M here: the
423 module will be called kobil_sct.
424
425config USB_SERIAL_MCT_U232
426 tristate "USB MCT Single Port Serial Driver"
427 ---help---
428 Say Y here if you want to use a USB Serial single port adapter from
429 Magic Control Technology Corp. (U232 is one of the model numbers).
430
431 This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
432 BAY, Belkin F5U109, and Belkin F5U409 devices.
433
434 To compile this driver as a module, choose M here: the
435 module will be called mct_u232.
436
437config USB_SERIAL_METRO
438 tristate "USB Metrologic Instruments USB-POS Barcode Scanner Driver"
439 ---help---
440 Say Y here if you want to use a USB POS Metrologic barcode scanner.
441
442 To compile this driver as a module, choose M here: the
443 module will be called metro-usb.
444
445config USB_SERIAL_MOS7720
446 tristate "USB Moschip 7720 Serial Driver"
447 ---help---
448 Say Y here if you want to use USB Serial single and double
449 port adapters from Moschip Semiconductor Tech.
450
451 To compile this driver as a module, choose M here: the
452 module will be called mos7720.
453
454config USB_SERIAL_MOS7715_PARPORT
455 bool "Support for parallel port on the Moschip 7715"
456 depends on USB_SERIAL_MOS7720
457 depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720
458 select PARPORT_NOT_PC
459 ---help---
460 Say Y if you have a Moschip 7715 device and would like to use
461 the parallel port it provides. The port will register with
462 the parport subsystem as a low-level driver.
463
464config USB_SERIAL_MOS7840
465 tristate "USB Moschip 7840/7820 USB Serial Driver"
466 ---help---
467 Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820
468 Dual-Serial port device from MosChip Semiconductor.
469
470 The MCS7840 and MCS7820 have been developed to connect a wide range
471 of standard serial devices to a USB host. The MCS7840 has a USB
472 device controller connected to four (4) individual UARTs while the
473 MCS7820 controller connects to two (2) individual UARTs.
474
475 To compile this driver as a module, choose M here: the
476 module will be called mos7840. If unsure, choose N.
477
478config USB_SERIAL_MXUPORT
479 tristate "USB Moxa UPORT Serial Driver"
480 ---help---
481 Say Y here if you want to use a MOXA UPort Serial hub.
482
483 This driver supports:
484
485 [2 Port]
486 - UPort 1250 : 2 Port RS-232/422/485 USB to Serial Hub
487 - UPort 1250I : 2 Port RS-232/422/485 USB to Serial Hub with
488 Isolation
489
490 [4 Port]
491 - UPort 1410 : 4 Port RS-232 USB to Serial Hub
492 - UPort 1450 : 4 Port RS-232/422/485 USB to Serial Hub
493 - UPort 1450I : 4 Port RS-232/422/485 USB to Serial Hub with
494 Isolation
495
496 [8 Port]
497 - UPort 1610-8 : 8 Port RS-232 USB to Serial Hub
498 - UPort 1650-8 : 8 Port RS-232/422/485 USB to Serial Hub
499
500 [16 Port]
501 - UPort 1610-16 : 16 Port RS-232 USB to Serial Hub
502 - UPort 1650-16 : 16 Port RS-232/422/485 USB to Serial Hub
503
504 To compile this driver as a module, choose M here: the
505 module will be called mxuport.
506
507config USB_SERIAL_NAVMAN
508 tristate "USB Navman GPS device"
509 help
510 To compile this driver as a module, choose M here: the
511 module will be called navman.
512
513config USB_SERIAL_PL2303
514 tristate "USB Prolific 2303 Single Port Serial Driver"
515 help
516 Say Y here if you want to use the PL2303 USB Serial single port
517 adapter from Prolific.
518
519 To compile this driver as a module, choose M here: the
520 module will be called pl2303.
521
522config USB_SERIAL_OTI6858
523 tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller"
524 help
525 Say Y here if you want to use the OTi-6858 single port USB to serial
526 converter device.
527
528 To compile this driver as a module, choose M here: the
529 module will be called oti6858.
530
531config USB_SERIAL_QCAUX
532 tristate "USB Qualcomm Auxiliary Serial Port Driver"
533 help
534 Say Y here if you want to use the auxiliary serial ports provided
535 by many modems based on Qualcomm chipsets. These ports often use
536 a proprietary protocol called DM and cannot be used for AT- or
537 PPP-based communication.
538
539 To compile this driver as a module, choose M here: the
540 module will be called qcaux. If unsure, choose N.
541
542config USB_SERIAL_QUALCOMM
543 tristate "USB Qualcomm Serial modem"
544 select USB_SERIAL_WWAN
545 help
546 Say Y here if you have a Qualcomm USB modem device. These are
547 usually wireless cellular modems.
548
549 To compile this driver as a module, choose M here: the
550 module will be called qcserial.
551
552config USB_SERIAL_SPCP8X5
553 tristate "USB SPCP8x5 USB To Serial Driver"
554 help
555 Say Y here if you want to use the spcp8x5 converter chip. This is
556 commonly found in some Z-Wave USB devices.
557
558 To compile this driver as a module, choose M here: the
559 module will be called spcp8x5.
560
561config USB_SERIAL_SAFE
562 tristate "USB Safe Serial (Encapsulated) Driver"
563
564config USB_SERIAL_SAFE_PADDED
565 bool "USB Secure Encapsulated Driver - Padded"
566 depends on USB_SERIAL_SAFE
567
568config USB_SERIAL_SIERRAWIRELESS
569 tristate "USB Sierra Wireless Driver"
570 help
571 Say M here if you want to use Sierra Wireless devices.
572
573 Many devices have a feature known as TRU-Install. For those devices
574 to work properly, the USB Storage Sierra feature must be enabled.
575
576 To compile this driver as a module, choose M here: the
577 module will be called sierra.
578
579config USB_SERIAL_SYMBOL
580 tristate "USB Symbol Barcode driver (serial mode)"
581 help
582 Say Y here if you want to use a Symbol USB Barcode device
583 in serial emulation mode.
584
585 To compile this driver as a module, choose M here: the
586 module will be called symbolserial.
587
588config USB_SERIAL_TI
589 tristate "USB TI 3410/5052 Serial Driver"
590 help
591 Say Y here if you want to use the TI USB 3410 or 5052
592 serial devices.
593
594 To compile this driver as a module, choose M here: the
595 module will be called ti_usb_3410_5052.
596
597config USB_SERIAL_CYBERJACK
598 tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader"
599 ---help---
600 Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
601 reader. This is an interface to ISO 7816 compatible contact-based
602 chipcards, e.g. GSM SIMs.
603
604 To compile this driver as a module, choose M here: the
605 module will be called cyberjack.
606
607 If unsure, say N.
608
609config USB_SERIAL_XIRCOM
610 tristate "USB Xircom / Entrega Single Port Serial Driver"
611 select USB_EZUSB_FX2
612 help
613 Say Y here if you want to use a Xircom or Entrega single port USB to
614 serial converter device. This driver makes use of firmware
615 developed from scratch by Brian Warner.
616
617 To compile this driver as a module, choose M here: the
618 module will be called keyspan_pda.
619
620config USB_SERIAL_WWAN
621 tristate
622
623config USB_SERIAL_OPTION
624 tristate "USB driver for GSM and CDMA modems"
625 select USB_SERIAL_WWAN
626 help
627 Say Y here if you have a GSM or CDMA modem that's connected to USB.
628
629 This driver also supports several PCMCIA cards which have a
630 built-in OHCI-USB adapter and an internally-connected GSM modem.
631 The USB bus on these cards is not accessible externally.
632
633 Supported devices include (some of?) those made by:
634 Option, Huawei, Audiovox, Novatel Wireless, or Anydata.
635
636 To compile this driver as a module, choose M here: the
637 module will be called option.
638
639 If this driver doesn't recognize your device,
640 it might be accessible via the FTDI_SIO driver.
641
642config USB_SERIAL_OMNINET
643 tristate "USB ZyXEL omni.net LCD Plus Driver"
644 help
645 Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
646
647 To compile this driver as a module, choose M here: the
648 module will be called omninet.
649
650config USB_SERIAL_OPTICON
651 tristate "USB Opticon Barcode driver (serial mode)"
652 help
653 Say Y here if you want to use a Opticon USB Barcode device
654 in serial emulation mode.
655
656 To compile this driver as a module, choose M here: the
657 module will be called opticon.
658
659config USB_SERIAL_XSENS_MT
660 tristate "Xsens motion tracker serial interface driver"
661 help
662 Say Y here if you want to use Xsens motion trackers.
663
664 This driver supports the new generation of motion trackers
665 by Xsens. Older devices can be accessed using the FTDI_SIO
666 driver.
667
668 To compile this driver as a module, choose M here: the
669 module will be called xsens_mt.
670
671config USB_SERIAL_WISHBONE
672 tristate "USB-Wishbone adapter interface driver"
673 help
674 Say Y here if you want to use a USB attached Wishbone bus.
675
676 Wishbone is an open hardware SoC bus commonly used in FPGA
677 designs. Bus access can be serialized using the Etherbone
678 protocol <http://www.ohwr.org/projects/etherbone-core>.
679
680 This driver is intended to be used with devices which attach
681 their internal Wishbone bus to a USB serial interface using
682 the Etherbone protocol. A userspace library is required to
683 speak the protocol made available by this driver as ttyUSBx.
684
685 To compile this driver as a module, choose M here: the
686 module will be called wishbone-serial.
687
688config USB_SERIAL_SSU100
689 tristate "USB Quatech SSU-100 Single Port Serial Driver"
690 help
691 Say Y here if you want to use the Quatech SSU-100 single
692 port usb to serial adapter.
693
694 To compile this driver as a module, choose M here: the
695 module will be called ssu100.
696
697config USB_SERIAL_QT2
698 tristate "USB Quatech Serial Driver for USB 2 devices"
699 help
700 Say Y here if you want to use the Quatech USB 2
701 serial adapters.
702
703 To compile this driver as a module, choose M here: the
704 module will be called quatech-serial.
705
706config USB_SERIAL_DEBUG
707 tristate "USB Debugging Device"
708 help
709 Say Y here if you have a USB debugging device used to receive
710 debugging data from another machine. The most common of these
711 devices is the NetChip TurboCONNECT device.
712
713 To compile this driver as a module, choose M here: the
714 module will be called usb-debug.
715
716endif # USB_SERIAL
1#
2# USB Serial device configuration
3#
4
5menuconfig USB_SERIAL
6 tristate "USB Serial Converter support"
7 depends on USB
8 ---help---
9 Say Y here if you have a USB device that provides normal serial
10 ports, or acts like a serial device, and you want to connect it to
11 your USB bus.
12
13 Please read <file:Documentation/usb/usb-serial.txt> for more
14 information on the specifics of the different devices that are
15 supported, and on how to use them.
16
17 To compile this driver as a module, choose M here: the
18 module will be called usbserial.
19
20if USB_SERIAL
21
22config USB_SERIAL_CONSOLE
23 bool "USB Serial Console device support"
24 depends on USB_SERIAL=y
25 ---help---
26 If you say Y here, it will be possible to use a USB to serial
27 converter port as the system console (the system console is the
28 device which receives all kernel messages and warnings and which
29 allows logins in single user mode). This could be useful if some
30 terminal or printer is connected to that serial port.
31
32 Even if you say Y here, the currently visible virtual console
33 (/dev/tty0) will still be used as the system console by default, but
34 you can alter that using a kernel command line option such as
35 "console=ttyUSB0". (Try "man bootparam" or see the documentation of
36 your boot loader (lilo or loadlin) about how to pass options to the
37 kernel at boot time.)
38
39 If you don't have a VGA card installed and you say Y here, the
40 kernel will automatically use the first USB to serial converter
41 port, /dev/ttyUSB0, as system console.
42
43 If unsure, say N.
44
45config USB_EZUSB
46 bool "Functions for loading firmware on EZUSB chips"
47 help
48 Say Y here if you need EZUSB device support.
49
50config USB_SERIAL_GENERIC
51 bool "USB Generic Serial Driver"
52 help
53 Say Y here if you want to use the generic USB serial driver. Please
54 read <file:Documentation/usb/usb-serial.txt> for more information on
55 using this driver. It is recommended that the "USB Serial converter
56 support" be compiled as a module for this driver to be used
57 properly.
58
59config USB_SERIAL_AIRCABLE
60 tristate "USB AIRcable Bluetooth Dongle Driver"
61 help
62 Say Y here if you want to use USB AIRcable Bluetooth Dongle.
63
64 To compile this driver as a module, choose M here: the module
65 will be called aircable.
66
67config USB_SERIAL_ARK3116
68 tristate "USB ARK Micro 3116 USB Serial Driver"
69 help
70 Say Y here if you want to use a ARK Micro 3116 USB to Serial
71 device.
72
73 To compile this driver as a module, choose M here: the
74 module will be called ark3116
75
76config USB_SERIAL_BELKIN
77 tristate "USB Belkin and Peracom Single Port Serial Driver"
78 help
79 Say Y here if you want to use a Belkin USB Serial single port
80 adaptor (F5U103 is one of the model numbers) or the Peracom single
81 port USB to serial adapter.
82
83 To compile this driver as a module, choose M here: the
84 module will be called belkin_sa.
85
86config USB_SERIAL_CH341
87 tristate "USB Winchiphead CH341 Single Port Serial Driver"
88 help
89 Say Y here if you want to use a Winchiphead CH341 single port
90 USB to serial adapter.
91
92 To compile this driver as a module, choose M here: the
93 module will be called ch341.
94
95config USB_SERIAL_WHITEHEAT
96 tristate "USB ConnectTech WhiteHEAT Serial Driver"
97 select USB_EZUSB
98 help
99 Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
100 USB to serial converter device.
101
102 To compile this driver as a module, choose M here: the
103 module will be called whiteheat.
104
105config USB_SERIAL_DIGI_ACCELEPORT
106 tristate "USB Digi International AccelePort USB Serial Driver"
107 ---help---
108 Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
109 2 port (plus parallel port) and 4 port USB serial converters. The
110 parallel port on the USB 2 appears as a third serial port on Linux.
111 The Digi Acceleport USB 8 is not yet supported by this driver.
112
113 This driver works under SMP with the usb-uhci driver. It does not
114 work under SMP with the uhci driver.
115
116 To compile this driver as a module, choose M here: the
117 module will be called digi_acceleport.
118
119config USB_SERIAL_CP210X
120 tristate "USB CP210x family of UART Bridge Controllers"
121 help
122 Say Y here if you want to use a CP2101/CP2102/CP2103 based USB
123 to RS232 converters.
124
125 To compile this driver as a module, choose M here: the
126 module will be called cp210x.
127
128config USB_SERIAL_CYPRESS_M8
129 tristate "USB Cypress M8 USB Serial Driver"
130 help
131 Say Y here if you want to use a device that contains the Cypress
132 USB to Serial microcontroller, such as the DeLorme Earthmate GPS.
133
134 Attempted SMP support... send bug reports!
135
136 Supported microcontrollers in the CY4601 family are:
137 CY7C63741 CY7C63742 CY7C63743 CY7C64013
138
139 To compile this driver as a module, choose M here: the
140 module will be called cypress_m8.
141
142config USB_SERIAL_EMPEG
143 tristate "USB Empeg empeg-car Mark I/II Driver"
144 help
145 Say Y here if you want to connect to your Empeg empeg-car Mark I/II
146 mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...}
147 device node. See <file:Documentation/usb/usb-serial.txt> for more
148 tidbits of information.
149
150 To compile this driver as a module, choose M here: the
151 module will be called empeg.
152
153config USB_SERIAL_FTDI_SIO
154 tristate "USB FTDI Single Port Serial Driver"
155 ---help---
156 Say Y here if you want to use a FTDI SIO single port USB to serial
157 converter device. The implementation I have is called the USC-1000.
158 This driver has also be tested with the 245 and 232 devices.
159
160 See <http://ftdi-usb-sio.sourceforge.net/> for more
161 information on this driver and the device.
162
163 To compile this driver as a module, choose M here: the
164 module will be called ftdi_sio.
165
166config USB_SERIAL_FUNSOFT
167 tristate "USB Fundamental Software Dongle Driver"
168 ---help---
169 Say Y here if you want to use the Fundamental Software dongle.
170
171 To compile this driver as a module, choose M here: the
172 module will be called funsoft.
173
174config USB_SERIAL_VISOR
175 tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
176 help
177 Say Y here if you want to connect to your HandSpring Visor, Palm
178 m500 or m505 through its USB docking station. See
179 <http://usbvisor.sourceforge.net/index.php3> for more information on using this
180 driver.
181
182 To compile this driver as a module, choose M here: the
183 module will be called visor.
184
185config USB_SERIAL_IPAQ
186 tristate "USB PocketPC PDA Driver"
187 help
188 Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
189 or any other PDA running Windows CE 3.0 or PocketPC 2002
190 using a USB cradle/cable. For information on using the driver,
191 read <file:Documentation/usb/usb-serial.txt>.
192
193 To compile this driver as a module, choose M here: the
194 module will be called ipaq.
195
196config USB_SERIAL_IR
197 tristate "USB IR Dongle Serial Driver"
198 help
199 Say Y here if you want to enable simple serial support for USB IrDA
200 devices. This is useful if you do not want to use the full IrDA
201 stack.
202
203 To compile this driver as a module, choose M here: the
204 module will be called ir-usb.
205
206config USB_SERIAL_EDGEPORT
207 tristate "USB Inside Out Edgeport Serial Driver"
208 ---help---
209 Say Y here if you want to use any of the following devices from
210 Inside Out Networks (Digi):
211 Edgeport/4
212 Rapidport/4
213 Edgeport/4t
214 Edgeport/2
215 Edgeport/4i
216 Edgeport/2i
217 Edgeport/421
218 Edgeport/21
219 Edgeport/8
220 Edgeport/8 Dual
221 Edgeport/2D8
222 Edgeport/4D8
223 Edgeport/8i
224 Edgeport/2 DIN
225 Edgeport/4 DIN
226 Edgeport/16 Dual
227
228 To compile this driver as a module, choose M here: the
229 module will be called io_edgeport.
230
231config USB_SERIAL_EDGEPORT_TI
232 tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
233 help
234 Say Y here if you want to use any of the devices from Inside Out
235 Networks (Digi) that are not supported by the io_edgeport driver.
236 This includes the Edgeport/1 device.
237
238 To compile this driver as a module, choose M here: the
239 module will be called io_ti.
240
241config USB_SERIAL_GARMIN
242 tristate "USB Garmin GPS driver"
243 help
244 Say Y here if you want to connect to your Garmin GPS.
245 Should work with most Garmin GPS devices which have a native USB port.
246
247 See <http://sourceforge.net/projects/garmin-gps> for the latest
248 version of the driver.
249
250 To compile this driver as a module, choose M here: the
251 module will be called garmin_gps.
252
253config USB_SERIAL_IPW
254 tristate "USB IPWireless (3G UMTS TDD) Driver"
255 help
256 Say Y here if you want to use a IPWireless USB modem such as
257 the ones supplied by Axity3G/Sentech South Africa.
258
259 To compile this driver as a module, choose M here: the
260 module will be called ipw.
261
262config USB_SERIAL_IUU
263 tristate "USB Infinity USB Unlimited Phoenix Driver"
264 help
265 Say Y here if you want to use a IUU in phoenix mode and get
266 an extra ttyUSBx device. More information available on
267 http://eczema.ecze.com/iuu_phoenix.html
268
269 To compile this driver as a module, choose M here: the
270 module will be called iuu_phoenix.o
271
272config USB_SERIAL_KEYSPAN_PDA
273 tristate "USB Keyspan PDA Single Port Serial Driver"
274 select USB_EZUSB
275 help
276 Say Y here if you want to use a Keyspan PDA single port USB to
277 serial converter device. This driver makes use of firmware
278 developed from scratch by Brian Warner.
279
280 To compile this driver as a module, choose M here: the
281 module will be called keyspan_pda.
282
283config USB_SERIAL_KEYSPAN
284 tristate "USB Keyspan USA-xxx Serial Driver"
285 select USB_EZUSB
286 ---help---
287 Say Y here if you want to use Keyspan USB to serial converter
288 devices. This driver makes use of Keyspan's official firmware
289 and was developed with their support. You must also include
290 firmware to support your particular device(s).
291
292 See <http://blemings.org/hugh/keyspan.html> for more information.
293
294 To compile this driver as a module, choose M here: the
295 module will be called keyspan.
296
297config USB_SERIAL_KEYSPAN_MPR
298 bool "USB Keyspan MPR Firmware"
299 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
300 help
301 Say Y here to include firmware for the Keyspan MPR converter.
302
303config USB_SERIAL_KEYSPAN_USA28
304 bool "USB Keyspan USA-28 Firmware"
305 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
306 help
307 Say Y here to include firmware for the USA-28 converter.
308
309config USB_SERIAL_KEYSPAN_USA28X
310 bool "USB Keyspan USA-28X Firmware"
311 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
312 help
313 Say Y here to include firmware for the USA-28X converter.
314 Be sure you have a USA-28X, there are also 28XA and 28XB
315 models, the label underneath has the actual part number.
316
317config USB_SERIAL_KEYSPAN_USA28XA
318 bool "USB Keyspan USA-28XA Firmware"
319 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
320 help
321 Say Y here to include firmware for the USA-28XA converter.
322 Be sure you have a USA-28XA, there are also 28X and 28XB
323 models, the label underneath has the actual part number.
324
325config USB_SERIAL_KEYSPAN_USA28XB
326 bool "USB Keyspan USA-28XB Firmware"
327 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
328 help
329 Say Y here to include firmware for the USA-28XB converter.
330 Be sure you have a USA-28XB, there are also 28X and 28XA
331 models, the label underneath has the actual part number.
332
333config USB_SERIAL_KEYSPAN_USA19
334 bool "USB Keyspan USA-19 Firmware"
335 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
336 help
337 Say Y here to include firmware for the USA-19 converter.
338
339config USB_SERIAL_KEYSPAN_USA18X
340 bool "USB Keyspan USA-18X Firmware"
341 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
342 help
343 Say Y here to include firmware for the USA-18X converter.
344
345config USB_SERIAL_KEYSPAN_USA19W
346 bool "USB Keyspan USA-19W Firmware"
347 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
348 help
349 Say Y here to include firmware for the USA-19W converter.
350
351config USB_SERIAL_KEYSPAN_USA19QW
352 bool "USB Keyspan USA-19QW Firmware"
353 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
354 help
355 Say Y here to include firmware for the USA-19QW converter.
356
357config USB_SERIAL_KEYSPAN_USA19QI
358 bool "USB Keyspan USA-19QI Firmware"
359 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
360 help
361 Say Y here to include firmware for the USA-19QI converter.
362
363config USB_SERIAL_KEYSPAN_USA49W
364 bool "USB Keyspan USA-49W Firmware"
365 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
366 help
367 Say Y here to include firmware for the USA-49W converter.
368
369config USB_SERIAL_KEYSPAN_USA49WLC
370 bool "USB Keyspan USA-49WLC Firmware"
371 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
372 help
373 Say Y here to include firmware for the USA-49WLC converter.
374
375config USB_SERIAL_KLSI
376 tristate "USB KL5KUSB105 (Palmconnect) Driver"
377 ---help---
378 Say Y here if you want to use a KL5KUSB105 - based single port
379 serial adapter. The most widely known -- and currently the only
380 tested -- device in this category is the PalmConnect USB Serial
381 adapter sold by Palm Inc. for use with their Palm III and Palm V
382 series PDAs.
383
384 Please read <file:Documentation/usb/usb-serial.txt> for more
385 information.
386
387 To compile this driver as a module, choose M here: the
388 module will be called kl5kusb105.
389
390config USB_SERIAL_KOBIL_SCT
391 tristate "USB KOBIL chipcard reader"
392 ---help---
393 Say Y here if you want to use one of the following KOBIL USB chipcard
394 readers:
395
396 - USB TWIN
397 - KAAN Standard Plus
398 - KAAN SIM
399 - SecOVID Reader Plus
400 - B1 Professional
401 - KAAN Professional
402
403 Note that you need a current CT-API.
404 To compile this driver as a module, choose M here: the
405 module will be called kobil_sct.
406
407config USB_SERIAL_MCT_U232
408 tristate "USB MCT Single Port Serial Driver"
409 ---help---
410 Say Y here if you want to use a USB Serial single port adapter from
411 Magic Control Technology Corp. (U232 is one of the model numbers).
412
413 This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
414 BAY, Belkin F5U109, and Belkin F5U409 devices.
415
416 To compile this driver as a module, choose M here: the
417 module will be called mct_u232.
418
419config USB_SERIAL_MOS7720
420 tristate "USB Moschip 7720 Serial Driver"
421 ---help---
422 Say Y here if you want to use USB Serial single and double
423 port adapters from Moschip Semiconductor Tech.
424
425 To compile this driver as a module, choose M here: the
426 module will be called mos7720.
427
428config USB_SERIAL_MOS7715_PARPORT
429 bool "Support for parallel port on the Moschip 7715"
430 depends on USB_SERIAL_MOS7720
431 depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720
432 select PARPORT_NOT_PC
433 ---help---
434 Say Y if you have a Moschip 7715 device and would like to use
435 the parallel port it provides. The port will register with
436 the parport subsystem as a low-level driver.
437
438config USB_SERIAL_MOS7840
439 tristate "USB Moschip 7840/7820 USB Serial Driver"
440 ---help---
441 Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820
442 Dual-Serial port device from MosChip Semiconductor.
443
444 The MCS7840 and MCS7820 have been developed to connect a wide range
445 of standard serial devices to a USB host. The MCS7840 has a USB
446 device controller connected to four (4) individual UARTs while the
447 MCS7820 controller connects to two (2) individual UARTs.
448
449 To compile this driver as a module, choose M here: the
450 module will be called mos7840. If unsure, choose N.
451
452config USB_SERIAL_MOTOROLA
453 tristate "USB Motorola Phone modem driver"
454 ---help---
455 Say Y here if you want to use a Motorola phone with a USB
456 connector as a modem link.
457
458 To compile this driver as a module, choose M here: the
459 module will be called moto_modem. If unsure, choose N.
460
461config USB_SERIAL_NAVMAN
462 tristate "USB Navman GPS device"
463 help
464 To compile this driver as a module, choose M here: the
465 module will be called navman.
466
467config USB_SERIAL_PL2303
468 tristate "USB Prolific 2303 Single Port Serial Driver"
469 help
470 Say Y here if you want to use the PL2303 USB Serial single port
471 adapter from Prolific.
472
473 To compile this driver as a module, choose M here: the
474 module will be called pl2303.
475
476config USB_SERIAL_OTI6858
477 tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller"
478 help
479 Say Y here if you want to use the OTi-6858 single port USB to serial
480 converter device.
481
482 To compile this driver as a module, choose M here: the
483 module will be called oti6858.
484
485config USB_SERIAL_QCAUX
486 tristate "USB Qualcomm Auxiliary Serial Port Driver"
487 help
488 Say Y here if you want to use the auxiliary serial ports provided
489 by many modems based on Qualcomm chipsets. These ports often use
490 a proprietary protocol called DM and cannot be used for AT- or
491 PPP-based communication.
492
493 To compile this driver as a module, choose M here: the
494 module will be called qcaux. If unsure, choose N.
495
496config USB_SERIAL_QUALCOMM
497 tristate "USB Qualcomm Serial modem"
498 select USB_SERIAL_WWAN
499 help
500 Say Y here if you have a Qualcomm USB modem device. These are
501 usually wireless cellular modems.
502
503 To compile this driver as a module, choose M here: the
504 module will be called qcserial.
505
506config USB_SERIAL_SPCP8X5
507 tristate "USB SPCP8x5 USB To Serial Driver"
508 help
509 Say Y here if you want to use the spcp8x5 converter chip. This is
510 commonly found in some Z-Wave USB devices.
511
512 To compile this driver as a module, choose M here: the
513 module will be called spcp8x5.
514
515config USB_SERIAL_HP4X
516 tristate "USB HP4x Calculators support"
517 help
518 Say Y here if you want to use an Hewlett-Packard 4x Calculator.
519
520 To compile this driver as a module, choose M here: the
521 module will be called hp4x.
522
523config USB_SERIAL_SAFE
524 tristate "USB Safe Serial (Encapsulated) Driver"
525
526config USB_SERIAL_SAFE_PADDED
527 bool "USB Secure Encapsulated Driver - Padded"
528 depends on USB_SERIAL_SAFE
529
530config USB_SERIAL_SIEMENS_MPI
531 tristate "USB Siemens MPI driver"
532 help
533 Say M here if you want to use a Siemens USB/MPI adapter.
534
535 To compile this driver as a module, choose M here: the
536 module will be called siemens_mpi.
537
538config USB_SERIAL_SIERRAWIRELESS
539 tristate "USB Sierra Wireless Driver"
540 help
541 Say M here if you want to use Sierra Wireless devices.
542
543 Many devices have a feature known as TRU-Install. For those devices
544 to work properly, the USB Storage Sierra feature must be enabled.
545
546 To compile this driver as a module, choose M here: the
547 module will be called sierra.
548
549config USB_SERIAL_SYMBOL
550 tristate "USB Symbol Barcode driver (serial mode)"
551 help
552 Say Y here if you want to use a Symbol USB Barcode device
553 in serial emulation mode.
554
555 To compile this driver as a module, choose M here: the
556 module will be called symbolserial.
557
558config USB_SERIAL_TI
559 tristate "USB TI 3410/5052 Serial Driver"
560 help
561 Say Y here if you want to use the TI USB 3410 or 5052
562 serial devices.
563
564 To compile this driver as a module, choose M here: the
565 module will be called ti_usb_3410_5052.
566
567config USB_SERIAL_CYBERJACK
568 tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader"
569 ---help---
570 Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
571 reader. This is an interface to ISO 7816 compatible contact-based
572 chipcards, e.g. GSM SIMs.
573
574 To compile this driver as a module, choose M here: the
575 module will be called cyberjack.
576
577 If unsure, say N.
578
579config USB_SERIAL_XIRCOM
580 tristate "USB Xircom / Entregra Single Port Serial Driver"
581 select USB_EZUSB
582 help
583 Say Y here if you want to use a Xircom or Entregra single port USB to
584 serial converter device. This driver makes use of firmware
585 developed from scratch by Brian Warner.
586
587 To compile this driver as a module, choose M here: the
588 module will be called keyspan_pda.
589
590config USB_SERIAL_WWAN
591 tristate
592
593config USB_SERIAL_OPTION
594 tristate "USB driver for GSM and CDMA modems"
595 select USB_SERIAL_WWAN
596 help
597 Say Y here if you have a GSM or CDMA modem that's connected to USB.
598
599 This driver also supports several PCMCIA cards which have a
600 built-in OHCI-USB adapter and an internally-connected GSM modem.
601 The USB bus on these cards is not accessible externally.
602
603 Supported devices include (some of?) those made by:
604 Option, Huawei, Audiovox, Novatel Wireless, or Anydata.
605
606 To compile this driver as a module, choose M here: the
607 module will be called option.
608
609 If this driver doesn't recognize your device,
610 it might be accessible via the FTDI_SIO driver.
611
612config USB_SERIAL_OMNINET
613 tristate "USB ZyXEL omni.net LCD Plus Driver"
614 help
615 Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
616
617 To compile this driver as a module, choose M here: the
618 module will be called omninet.
619
620config USB_SERIAL_OPTICON
621 tristate "USB Opticon Barcode driver (serial mode)"
622 help
623 Say Y here if you want to use a Opticon USB Barcode device
624 in serial emulation mode.
625
626 To compile this driver as a module, choose M here: the
627 module will be called opticon.
628
629config USB_SERIAL_VIVOPAY_SERIAL
630 tristate "USB ViVOpay serial interface driver"
631 help
632 Say Y here if you want to use a ViVOtech ViVOpay USB device.
633
634 To compile this driver as a module, choose M here: the
635 module will be called vivopay-serial.
636
637config USB_SERIAL_ZIO
638 tristate "ZIO Motherboard USB serial interface driver"
639 help
640 Say Y here if you want to use ZIO Motherboard.
641
642 To compile this driver as a module, choose M here: the
643 module will be called zio.
644
645config USB_SERIAL_SSU100
646 tristate "USB Quatech SSU-100 Single Port Serial Driver"
647 help
648 Say Y here if you want to use the Quatech SSU-100 single
649 port usb to serial adapter.
650
651 To compile this driver as a module, choose M here: the
652 module will be called ssu100.
653
654config USB_SERIAL_DEBUG
655 tristate "USB Debugging Device"
656 help
657 Say Y here if you have a USB debugging device used to receive
658 debugging data from another machine. The most common of these
659 devices is the NetChip TurboCONNECT device.
660
661 To compile this driver as a module, choose M here: the
662 module will be called usb-debug.
663
664endif # USB_SERIAL