Loading...
1/*
2 * Copyright 2012 Freescale Semiconductor, Inc.
3 *
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 or later at the following locations:
7 *
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
10 */
11
12#include <linux/clk.h>
13#include <linux/err.h>
14#include <linux/io.h>
15#include <linux/kernel.h>
16#include <linux/module.h>
17#include <linux/of.h>
18#include <linux/of_address.h>
19#include <linux/platform_device.h>
20#include <linux/pwm.h>
21#include <linux/slab.h>
22#include <linux/stmp_device.h>
23
24#define SET 0x4
25#define CLR 0x8
26#define TOG 0xc
27
28#define PWM_CTRL 0x0
29#define PWM_ACTIVE0 0x10
30#define PWM_PERIOD0 0x20
31#define PERIOD_PERIOD(p) ((p) & 0xffff)
32#define PERIOD_PERIOD_MAX 0x10000
33#define PERIOD_ACTIVE_HIGH (3 << 16)
34#define PERIOD_INACTIVE_LOW (2 << 18)
35#define PERIOD_CDIV(div) (((div) & 0x7) << 20)
36#define PERIOD_CDIV_MAX 8
37
38static const unsigned int cdiv[PERIOD_CDIV_MAX] = {
39 1, 2, 4, 8, 16, 64, 256, 1024
40};
41
42struct mxs_pwm_chip {
43 struct pwm_chip chip;
44 struct clk *clk;
45 void __iomem *base;
46};
47
48#define to_mxs_pwm_chip(_chip) container_of(_chip, struct mxs_pwm_chip, chip)
49
50static int mxs_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
51 int duty_ns, int period_ns)
52{
53 struct mxs_pwm_chip *mxs = to_mxs_pwm_chip(chip);
54 int ret, div = 0;
55 unsigned int period_cycles, duty_cycles;
56 unsigned long rate;
57 unsigned long long c;
58
59 rate = clk_get_rate(mxs->clk);
60 while (1) {
61 c = rate / cdiv[div];
62 c = c * period_ns;
63 do_div(c, 1000000000);
64 if (c < PERIOD_PERIOD_MAX)
65 break;
66 div++;
67 if (div >= PERIOD_CDIV_MAX)
68 return -EINVAL;
69 }
70
71 period_cycles = c;
72 c *= duty_ns;
73 do_div(c, period_ns);
74 duty_cycles = c;
75
76 /*
77 * If the PWM channel is disabled, make sure to turn on the clock
78 * before writing the register. Otherwise, keep it enabled.
79 */
80 if (!pwm_is_enabled(pwm)) {
81 ret = clk_prepare_enable(mxs->clk);
82 if (ret)
83 return ret;
84 }
85
86 writel(duty_cycles << 16,
87 mxs->base + PWM_ACTIVE0 + pwm->hwpwm * 0x20);
88 writel(PERIOD_PERIOD(period_cycles) | PERIOD_ACTIVE_HIGH |
89 PERIOD_INACTIVE_LOW | PERIOD_CDIV(div),
90 mxs->base + PWM_PERIOD0 + pwm->hwpwm * 0x20);
91
92 /*
93 * If the PWM is not enabled, turn the clock off again to save power.
94 */
95 if (!pwm_is_enabled(pwm))
96 clk_disable_unprepare(mxs->clk);
97
98 return 0;
99}
100
101static int mxs_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
102{
103 struct mxs_pwm_chip *mxs = to_mxs_pwm_chip(chip);
104 int ret;
105
106 ret = clk_prepare_enable(mxs->clk);
107 if (ret)
108 return ret;
109
110 writel(1 << pwm->hwpwm, mxs->base + PWM_CTRL + SET);
111
112 return 0;
113}
114
115static void mxs_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
116{
117 struct mxs_pwm_chip *mxs = to_mxs_pwm_chip(chip);
118
119 writel(1 << pwm->hwpwm, mxs->base + PWM_CTRL + CLR);
120
121 clk_disable_unprepare(mxs->clk);
122}
123
124static const struct pwm_ops mxs_pwm_ops = {
125 .config = mxs_pwm_config,
126 .enable = mxs_pwm_enable,
127 .disable = mxs_pwm_disable,
128 .owner = THIS_MODULE,
129};
130
131static int mxs_pwm_probe(struct platform_device *pdev)
132{
133 struct device_node *np = pdev->dev.of_node;
134 struct mxs_pwm_chip *mxs;
135 struct resource *res;
136 int ret;
137
138 mxs = devm_kzalloc(&pdev->dev, sizeof(*mxs), GFP_KERNEL);
139 if (!mxs)
140 return -ENOMEM;
141
142 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
143 mxs->base = devm_ioremap_resource(&pdev->dev, res);
144 if (IS_ERR(mxs->base))
145 return PTR_ERR(mxs->base);
146
147 mxs->clk = devm_clk_get(&pdev->dev, NULL);
148 if (IS_ERR(mxs->clk))
149 return PTR_ERR(mxs->clk);
150
151 mxs->chip.dev = &pdev->dev;
152 mxs->chip.ops = &mxs_pwm_ops;
153 mxs->chip.base = -1;
154
155 ret = of_property_read_u32(np, "fsl,pwm-number", &mxs->chip.npwm);
156 if (ret < 0) {
157 dev_err(&pdev->dev, "failed to get pwm number: %d\n", ret);
158 return ret;
159 }
160
161 ret = pwmchip_add(&mxs->chip);
162 if (ret < 0) {
163 dev_err(&pdev->dev, "failed to add pwm chip %d\n", ret);
164 return ret;
165 }
166
167 platform_set_drvdata(pdev, mxs);
168
169 ret = stmp_reset_block(mxs->base);
170 if (ret)
171 goto pwm_remove;
172
173 return 0;
174
175pwm_remove:
176 pwmchip_remove(&mxs->chip);
177 return ret;
178}
179
180static int mxs_pwm_remove(struct platform_device *pdev)
181{
182 struct mxs_pwm_chip *mxs = platform_get_drvdata(pdev);
183
184 return pwmchip_remove(&mxs->chip);
185}
186
187static const struct of_device_id mxs_pwm_dt_ids[] = {
188 { .compatible = "fsl,imx23-pwm", },
189 { /* sentinel */ }
190};
191MODULE_DEVICE_TABLE(of, mxs_pwm_dt_ids);
192
193static struct platform_driver mxs_pwm_driver = {
194 .driver = {
195 .name = "mxs-pwm",
196 .of_match_table = mxs_pwm_dt_ids,
197 },
198 .probe = mxs_pwm_probe,
199 .remove = mxs_pwm_remove,
200};
201module_platform_driver(mxs_pwm_driver);
202
203MODULE_ALIAS("platform:mxs-pwm");
204MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>");
205MODULE_DESCRIPTION("Freescale MXS PWM Driver");
206MODULE_LICENSE("GPL v2");
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Copyright 2012 Freescale Semiconductor, Inc.
4 */
5
6#include <linux/clk.h>
7#include <linux/err.h>
8#include <linux/io.h>
9#include <linux/kernel.h>
10#include <linux/module.h>
11#include <linux/of.h>
12#include <linux/platform_device.h>
13#include <linux/pwm.h>
14#include <linux/slab.h>
15#include <linux/stmp_device.h>
16
17#define SET 0x4
18#define CLR 0x8
19#define TOG 0xc
20
21#define PWM_CTRL 0x0
22#define PWM_ACTIVE0 0x10
23#define PWM_PERIOD0 0x20
24#define PERIOD_PERIOD(p) ((p) & 0xffff)
25#define PERIOD_PERIOD_MAX 0x10000
26#define PERIOD_ACTIVE_HIGH (3 << 16)
27#define PERIOD_ACTIVE_LOW (2 << 16)
28#define PERIOD_INACTIVE_HIGH (3 << 18)
29#define PERIOD_INACTIVE_LOW (2 << 18)
30#define PERIOD_POLARITY_NORMAL (PERIOD_ACTIVE_HIGH | PERIOD_INACTIVE_LOW)
31#define PERIOD_POLARITY_INVERSE (PERIOD_ACTIVE_LOW | PERIOD_INACTIVE_HIGH)
32#define PERIOD_CDIV(div) (((div) & 0x7) << 20)
33#define PERIOD_CDIV_MAX 8
34
35static const u8 cdiv_shift[PERIOD_CDIV_MAX] = {
36 0, 1, 2, 3, 4, 6, 8, 10
37};
38
39struct mxs_pwm_chip {
40 struct pwm_chip chip;
41 struct clk *clk;
42 void __iomem *base;
43};
44
45#define to_mxs_pwm_chip(_chip) container_of(_chip, struct mxs_pwm_chip, chip)
46
47static int mxs_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
48 const struct pwm_state *state)
49{
50 struct mxs_pwm_chip *mxs = to_mxs_pwm_chip(chip);
51 int ret, div = 0;
52 unsigned int period_cycles, duty_cycles;
53 unsigned long rate;
54 unsigned long long c;
55 unsigned int pol_bits;
56
57 /*
58 * If the PWM channel is disabled, make sure to turn on the
59 * clock before calling clk_get_rate() and writing to the
60 * registers. Otherwise, just keep it enabled.
61 */
62 if (!pwm_is_enabled(pwm)) {
63 ret = clk_prepare_enable(mxs->clk);
64 if (ret)
65 return ret;
66 }
67
68 if (!state->enabled && pwm_is_enabled(pwm))
69 writel(1 << pwm->hwpwm, mxs->base + PWM_CTRL + CLR);
70
71 rate = clk_get_rate(mxs->clk);
72 while (1) {
73 c = rate >> cdiv_shift[div];
74 c = c * state->period;
75 do_div(c, 1000000000);
76 if (c < PERIOD_PERIOD_MAX)
77 break;
78 div++;
79 if (div >= PERIOD_CDIV_MAX)
80 return -EINVAL;
81 }
82
83 period_cycles = c;
84 c *= state->duty_cycle;
85 do_div(c, state->period);
86 duty_cycles = c;
87
88 /*
89 * The data sheet the says registers must be written to in
90 * this order (ACTIVEn, then PERIODn). Also, the new settings
91 * only take effect at the beginning of a new period, avoiding
92 * glitches.
93 */
94
95 pol_bits = state->polarity == PWM_POLARITY_NORMAL ?
96 PERIOD_POLARITY_NORMAL : PERIOD_POLARITY_INVERSE;
97 writel(duty_cycles << 16,
98 mxs->base + PWM_ACTIVE0 + pwm->hwpwm * 0x20);
99 writel(PERIOD_PERIOD(period_cycles) | pol_bits | PERIOD_CDIV(div),
100 mxs->base + PWM_PERIOD0 + pwm->hwpwm * 0x20);
101
102 if (state->enabled) {
103 if (!pwm_is_enabled(pwm)) {
104 /*
105 * The clock was enabled above. Just enable
106 * the channel in the control register.
107 */
108 writel(1 << pwm->hwpwm, mxs->base + PWM_CTRL + SET);
109 }
110 } else {
111 clk_disable_unprepare(mxs->clk);
112 }
113 return 0;
114}
115
116static const struct pwm_ops mxs_pwm_ops = {
117 .apply = mxs_pwm_apply,
118 .owner = THIS_MODULE,
119};
120
121static int mxs_pwm_probe(struct platform_device *pdev)
122{
123 struct device_node *np = pdev->dev.of_node;
124 struct mxs_pwm_chip *mxs;
125 int ret;
126
127 mxs = devm_kzalloc(&pdev->dev, sizeof(*mxs), GFP_KERNEL);
128 if (!mxs)
129 return -ENOMEM;
130
131 mxs->base = devm_platform_ioremap_resource(pdev, 0);
132 if (IS_ERR(mxs->base))
133 return PTR_ERR(mxs->base);
134
135 mxs->clk = devm_clk_get(&pdev->dev, NULL);
136 if (IS_ERR(mxs->clk))
137 return PTR_ERR(mxs->clk);
138
139 mxs->chip.dev = &pdev->dev;
140 mxs->chip.ops = &mxs_pwm_ops;
141
142 ret = of_property_read_u32(np, "fsl,pwm-number", &mxs->chip.npwm);
143 if (ret < 0) {
144 dev_err(&pdev->dev, "failed to get pwm number: %d\n", ret);
145 return ret;
146 }
147
148 /* FIXME: Only do this if the PWM isn't already running */
149 ret = stmp_reset_block(mxs->base);
150 if (ret)
151 return dev_err_probe(&pdev->dev, ret, "failed to reset PWM\n");
152
153 ret = devm_pwmchip_add(&pdev->dev, &mxs->chip);
154 if (ret < 0) {
155 dev_err(&pdev->dev, "failed to add pwm chip %d\n", ret);
156 return ret;
157 }
158
159 return 0;
160}
161
162static const struct of_device_id mxs_pwm_dt_ids[] = {
163 { .compatible = "fsl,imx23-pwm", },
164 { /* sentinel */ }
165};
166MODULE_DEVICE_TABLE(of, mxs_pwm_dt_ids);
167
168static struct platform_driver mxs_pwm_driver = {
169 .driver = {
170 .name = "mxs-pwm",
171 .of_match_table = mxs_pwm_dt_ids,
172 },
173 .probe = mxs_pwm_probe,
174};
175module_platform_driver(mxs_pwm_driver);
176
177MODULE_ALIAS("platform:mxs-pwm");
178MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>");
179MODULE_DESCRIPTION("Freescale MXS PWM Driver");
180MODULE_LICENSE("GPL v2");