Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Samsung's Exynos3250 based Rinato board device tree source
4 *
5 * Copyright (c) 2014 Samsung Electronics Co., Ltd.
6 * http://www.samsung.com
7 *
8 * Device tree source file for Samsung's Rinato board which is based on
9 * Samsung Exynos3250 SoC.
10 */
11
12/dts-v1/;
13#include "exynos3250.dtsi"
14#include "exynos4412-ppmu-common.dtsi"
15#include <dt-bindings/input/input.h>
16#include <dt-bindings/gpio/gpio.h>
17#include <dt-bindings/clock/samsung,s2mps11.h>
18
19/ {
20 model = "Samsung Rinato board";
21 compatible = "samsung,rinato", "samsung,exynos3250", "samsung,exynos3";
22
23 aliases {
24 i2c7 = &i2c_max77836;
25 };
26
27 memory@40000000 {
28 device_type = "memory";
29 reg = <0x40000000 0x1ff00000>;
30 };
31
32 firmware@205f000 {
33 compatible = "samsung,secure-firmware";
34 reg = <0x0205F000 0x1000>;
35 };
36
37 gpio_keys {
38 compatible = "gpio-keys";
39
40 power_key {
41 gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
42 linux,code = <KEY_POWER>;
43 label = "power key";
44 debounce-interval = <10>;
45 wakeup-source;
46 };
47 };
48
49 i2c_max77836: i2c-gpio-0 {
50 compatible = "i2c-gpio";
51 gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>;
52 #address-cells = <1>;
53 #size-cells = <0>;
54
55 max77836: subpmic@25 {
56 compatible = "maxim,max77836";
57 interrupt-parent = <&gpx1>;
58 interrupts = <5 IRQ_TYPE_NONE>;
59 reg = <0x25>;
60 wakeup-source;
61
62 muic: max77836-muic {
63 compatible = "maxim,max77836-muic";
64 };
65
66 regulators {
67 compatible = "maxim,max77836-regulator";
68 safeout_reg: SAFEOUT {
69 regulator-name = "SAFEOUT";
70 };
71
72 charger_reg: CHARGER {
73 regulator-name = "CHARGER";
74 regulator-min-microamp = <45000>;
75 regulator-max-microamp = <475000>;
76 regulator-boot-on;
77 };
78
79 motor_reg: LDO1 {
80 regulator-name = "MOT_2.7V";
81 regulator-min-microvolt = <1100000>;
82 regulator-max-microvolt = <2700000>;
83 };
84
85 LDO2 {
86 regulator-name = "UNUSED_LDO2";
87 regulator-min-microvolt = <800000>;
88 regulator-max-microvolt = <3950000>;
89 };
90 };
91
92 charger {
93 compatible = "maxim,max77836-charger";
94
95 maxim,constant-uvolt = <4350000>;
96 maxim,fast-charge-uamp = <225000>;
97 maxim,eoc-uamp = <7500>;
98 maxim,ovp-uvolt = <6500000>;
99 };
100 };
101 };
102
103 haptics {
104 compatible = "regulator-haptic";
105 haptic-supply = <&motor_reg>;
106 min-microvolt = <1100000>;
107 max-microvolt = <2700000>;
108 };
109
110 thermal-zones {
111 cpu_thermal: cpu-thermal {
112 cooling-maps {
113 map0 {
114 /* Corresponds to 500MHz */
115 cooling-device = <&cpu0 5 5>;
116 };
117 map1 {
118 /* Corresponds to 200MHz */
119 cooling-device = <&cpu0 8 8>;
120 };
121 };
122 };
123 };
124};
125
126&adc {
127 vdd-supply = <&ldo3_reg>;
128 status = "okay";
129 assigned-clocks = <&cmu CLK_SCLK_TSADC>;
130 assigned-clock-rates = <6000000>;
131
132 thermistor-ap {
133 compatible = "ntc,ncp15wb473";
134 pullup-uv = <1800000>;
135 pullup-ohm = <100000>;
136 pulldown-ohm = <100000>;
137 io-channels = <&adc 0>;
138 };
139
140 thermistor-battery {
141 compatible = "ntc,ncp15wb473";
142 pullup-uv = <1800000>;
143 pullup-ohm = <100000>;
144 pulldown-ohm = <100000>;
145 io-channels = <&adc 1>;
146 };
147};
148
149&bus_dmc {
150 devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
151 vdd-supply = <&buck1_reg>;
152 status = "okay";
153};
154
155&bus_leftbus {
156 devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
157 vdd-supply = <&buck3_reg>;
158 status = "okay";
159};
160
161&bus_rightbus {
162 devfreq = <&bus_leftbus>;
163 status = "okay";
164};
165
166&bus_lcd0 {
167 devfreq = <&bus_leftbus>;
168 status = "okay";
169};
170
171&bus_fsys {
172 devfreq = <&bus_leftbus>;
173 status = "okay";
174};
175
176&bus_mcuisp {
177 devfreq = <&bus_leftbus>;
178 status = "okay";
179};
180
181&bus_isp {
182 devfreq = <&bus_leftbus>;
183 status = "okay";
184};
185
186&bus_peril {
187 devfreq = <&bus_leftbus>;
188 status = "okay";
189};
190
191&bus_mfc {
192 devfreq = <&bus_leftbus>;
193 status = "okay";
194};
195
196&cpu0 {
197 cpu0-supply = <&buck2_reg>;
198};
199
200&exynos_usbphy {
201 status = "okay";
202 vbus-supply = <&safeout_reg>;
203};
204
205&hsotg {
206 vusb_d-supply = <&ldo15_reg>;
207 vusb_a-supply = <&ldo12_reg>;
208 dr_mode = "peripheral";
209 status = "okay";
210};
211
212&dsi_0 {
213 vddcore-supply = <&ldo6_reg>;
214 vddio-supply = <&ldo6_reg>;
215 samsung,burst-clock-frequency = <250000000>;
216 samsung,esc-clock-frequency = <20000000>;
217 samsung,pll-clock-frequency = <24000000>;
218 status = "okay";
219
220 panel@0 {
221 compatible = "samsung,s6e63j0x03";
222 reg = <0>;
223 vdd3-supply = <&ldo16_reg>;
224 vci-supply = <&ldo20_reg>;
225 reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>;
226 te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
227 };
228};
229
230&fimd {
231 status = "okay";
232
233 i80-if-timings {
234 cs-setup = <0>;
235 wr-setup = <0>;
236 wr-act = <1>;
237 wr-hold = <0>;
238 };
239};
240
241&i2c_0 {
242 #address-cells = <1>;
243 #size-cells = <0>;
244 samsung,i2c-sda-delay = <100>;
245 samsung,i2c-slave-addr = <0x10>;
246 samsung,i2c-max-bus-freq = <100000>;
247 status = "okay";
248
249 s2mps14_pmic@66 {
250 compatible = "samsung,s2mps14-pmic";
251 interrupt-parent = <&gpx0>;
252 interrupts = <7 IRQ_TYPE_NONE>;
253 reg = <0x66>;
254 wakeup-source;
255
256 s2mps14_osc: clocks {
257 compatible = "samsung,s2mps14-clk";
258 #clock-cells = <1>;
259 clock-output-names = "s2mps14_ap", "unused",
260 "s2mps14_bt";
261 };
262
263 regulators {
264 ldo1_reg: LDO1 {
265 regulator-name = "VAP_ALIVE_1.0V";
266 regulator-min-microvolt = <1000000>;
267 regulator-max-microvolt = <1000000>;
268 regulator-always-on;
269
270 regulator-state-mem {
271 regulator-on-in-suspend;
272 };
273 };
274
275 ldo2_reg: LDO2 {
276 regulator-name = "VAP_M1_1.2V";
277 regulator-min-microvolt = <1200000>;
278 regulator-max-microvolt = <1200000>;
279 regulator-always-on;
280
281 regulator-state-mem {
282 regulator-off-in-suspend;
283 };
284 };
285
286 ldo3_reg: LDO3 {
287 regulator-name = "VCC_AP_1.8V";
288 regulator-min-microvolt = <1800000>;
289 regulator-max-microvolt = <1800000>;
290 regulator-always-on;
291
292 regulator-state-mem {
293 regulator-off-in-suspend;
294 };
295 };
296
297 ldo4_reg: LDO4 {
298 regulator-name = "VAP_AVDD_PLL1";
299 regulator-min-microvolt = <1800000>;
300 regulator-max-microvolt = <1800000>;
301 regulator-always-on;
302
303 regulator-state-mem {
304 regulator-off-in-suspend;
305 };
306 };
307
308 ldo5_reg: LDO5 {
309 regulator-name = "VAP_PLL_ISO_1.0V";
310 regulator-min-microvolt = <1000000>;
311 regulator-max-microvolt = <1000000>;
312 regulator-always-on;
313
314 regulator-state-mem {
315 regulator-off-in-suspend;
316 };
317 };
318
319 ldo6_reg: LDO6 {
320 regulator-name = "VAP_VMIPI_1.0V";
321 regulator-min-microvolt = <1000000>;
322 regulator-max-microvolt = <1000000>;
323 regulator-always-on;
324
325 regulator-state-mem {
326 regulator-off-in-suspend;
327 };
328 };
329
330 ldo7_reg: LDO7 {
331 regulator-name = "VAP_AVDD_1.8V";
332 regulator-min-microvolt = <1800000>;
333 regulator-max-microvolt = <1800000>;
334 regulator-always-on;
335
336 regulator-state-mem {
337 regulator-off-in-suspend;
338 };
339 };
340
341 ldo8_reg: LDO8 {
342 regulator-name = "VAP_USB_3.0V";
343 regulator-min-microvolt = <3000000>;
344 regulator-max-microvolt = <3000000>;
345 regulator-always-on;
346
347 regulator-state-mem {
348 regulator-off-in-suspend;
349 };
350 };
351
352 ldo9_reg: LDO9 {
353 regulator-name = "V_LPDDR_1.2V";
354 regulator-min-microvolt = <1200000>;
355 regulator-max-microvolt = <1200000>;
356 regulator-always-on;
357
358 regulator-state-mem {
359 regulator-on-in-suspend;
360 };
361 };
362
363 ldo10_reg: LDO10 {
364 regulator-name = "UNUSED_LDO10";
365 regulator-min-microvolt = <1000000>;
366 regulator-max-microvolt = <1000000>;
367
368 regulator-state-mem {
369 regulator-off-in-suspend;
370 };
371 };
372
373 ldo11_reg: LDO11 {
374 regulator-name = "V_EMMC_1.8V";
375 regulator-min-microvolt = <1800000>;
376 regulator-max-microvolt = <1800000>;
377 samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
378 };
379
380 ldo12_reg: LDO12 {
381 regulator-name = "V_EMMC_2.8V";
382 regulator-min-microvolt = <2800000>;
383 regulator-max-microvolt = <2800000>;
384 samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
385 };
386
387 ldo13_reg: LDO13 {
388 regulator-name = "CAM_AVDD_2.8V";
389 regulator-min-microvolt = <2800000>;
390 regulator-max-microvolt = <2800000>;
391
392 regulator-state-mem {
393 regulator-off-in-suspend;
394 };
395 };
396
397 ldo14_reg: LDO14 {
398 regulator-name = "UNUSED_LDO14";
399 regulator-min-microvolt = <2700000>;
400 regulator-max-microvolt = <2700000>;
401
402 regulator-state-mem {
403 regulator-off-in-suspend;
404 };
405 };
406
407 ldo15_reg: LDO15 {
408 regulator-name = "TSP_AVDD_3.3V";
409 regulator-min-microvolt = <3300000>;
410 regulator-max-microvolt = <3300000>;
411
412 regulator-state-mem {
413 regulator-off-in-suspend;
414 };
415 };
416
417 ldo16_reg: LDO16 {
418 regulator-name = "LCD_VDD_3.3V";
419 regulator-min-microvolt = <3300000>;
420 regulator-max-microvolt = <3300000>;
421
422 regulator-state-mem {
423 regulator-off-in-suspend;
424 };
425 };
426
427 ldo17_reg: LDO17 {
428 regulator-name = "V_IRLED_3.3V";
429 regulator-min-microvolt = <3300000>;
430 regulator-max-microvolt = <3300000>;
431
432 regulator-state-mem {
433 regulator-off-in-suspend;
434 };
435 };
436
437 ldo18_reg: LDO18 {
438 regulator-name = "CAM_AF_2.8V";
439 regulator-min-microvolt = <2800000>;
440 regulator-max-microvolt = <2800000>;
441
442 regulator-state-mem {
443 regulator-off-in-suspend;
444 };
445 };
446
447 ldo19_reg: LDO19 {
448 regulator-name = "TSP_VDD_1.8V";
449 regulator-min-microvolt = <1800000>;
450 regulator-max-microvolt = <1800000>;
451
452 regulator-state-mem {
453 regulator-off-in-suspend;
454 };
455 };
456
457 ldo20_reg: LDO20 {
458 regulator-name = "LCD_VDD_1.8V";
459 regulator-min-microvolt = <1800000>;
460 regulator-max-microvolt = <1800000>;
461
462 regulator-state-mem {
463 regulator-off-in-suspend;
464 };
465 };
466
467 ldo21_reg: LDO21 {
468 regulator-name = "CAM_IO_1.8V";
469 regulator-min-microvolt = <1800000>;
470 regulator-max-microvolt = <1800000>;
471
472 regulator-state-mem {
473 regulator-off-in-suspend;
474 };
475 };
476
477 ldo22_reg: LDO22 {
478 regulator-name = "CAM_DVDD_1.2V";
479 regulator-min-microvolt = <1200000>;
480 regulator-max-microvolt = <1200000>;
481
482 regulator-state-mem {
483 regulator-off-in-suspend;
484 };
485 };
486
487 ldo23_reg: LDO23 {
488 regulator-name = "HRM_VCC_1.8V";
489 regulator-min-microvolt = <1800000>;
490 regulator-max-microvolt = <1800000>;
491 regulator-always-on;
492 };
493
494 ldo24_reg: LDO24 {
495 regulator-name = "HRM_VCC_3.3V";
496 regulator-min-microvolt = <3000000>;
497 regulator-max-microvolt = <3000000>;
498
499 regulator-state-mem {
500 regulator-off-in-suspend;
501 };
502 };
503
504 ldo25_reg: LDO25 {
505 regulator-name = "UNUSED_LDO25";
506 regulator-min-microvolt = <3000000>;
507 regulator-max-microvolt = <3000000>;
508
509 regulator-state-mem {
510 regulator-off-in-suspend;
511 };
512 };
513
514 buck1_reg: BUCK1 {
515 regulator-name = "VAP_MIF_1.0V";
516 regulator-min-microvolt = <800000>;
517 regulator-max-microvolt = <900000>;
518 regulator-always-on;
519
520 regulator-state-mem {
521 regulator-off-in-suspend;
522 };
523 };
524
525 buck2_reg: BUCK2 {
526 regulator-name = "VAP_ARM_1.0V";
527 regulator-min-microvolt = <850000>;
528 regulator-max-microvolt = <1150000>;
529 regulator-always-on;
530
531 regulator-state-mem {
532 regulator-off-in-suspend;
533 };
534 };
535
536 buck3_reg: BUCK3 {
537 regulator-name = "VAP_INT3D_1.0V";
538 regulator-min-microvolt = <850000>;
539 regulator-max-microvolt = <1000000>;
540 regulator-always-on;
541
542 regulator-state-mem {
543 regulator-off-in-suspend;
544 };
545 };
546
547 buck4_reg: BUCK4 {
548 regulator-name = "VCC_SUB_1.95V";
549 regulator-min-microvolt = <1950000>;
550 regulator-max-microvolt = <1950000>;
551 regulator-always-on;
552
553 regulator-state-mem {
554 regulator-on-in-suspend;
555 };
556 };
557
558 buck5_reg: BUCK5 {
559 regulator-name = "VCC_SUB_1.35V";
560 regulator-min-microvolt = <1350000>;
561 regulator-max-microvolt = <1350000>;
562 regulator-always-on;
563
564 regulator-state-mem {
565 regulator-on-in-suspend;
566 };
567 };
568 };
569 };
570};
571
572&i2c_1 {
573 #address-cells = <1>;
574 #size-cells = <0>;
575 samsung,i2c-sda-delay = <100>;
576 samsung,i2c-slave-addr = <0x10>;
577 samsung,i2c-max-bus-freq = <400000>;
578 status = "okay";
579
580 fuelgauge@36 {
581 compatible = "maxim,max77836-battery";
582 interrupt-parent = <&gpx1>;
583 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
584 reg = <0x36>;
585 };
586};
587
588&i2s2 {
589 status = "okay";
590};
591
592&jpeg {
593 status = "okay";
594};
595
596&mshc_0 {
597 #address-cells = <1>;
598 #size-cells = <0>;
599 broken-cd;
600 non-removable;
601 cap-mmc-highspeed;
602 desc-num = <4>;
603 mmc-hs200-1_8v;
604 card-detect-delay = <200>;
605 vmmc-supply = <&ldo12_reg>;
606 clock-frequency = <100000000>;
607 max-frequency = <100000000>;
608 samsung,dw-mshc-ciu-div = <1>;
609 samsung,dw-mshc-sdr-timing = <0 1>;
610 samsung,dw-mshc-ddr-timing = <1 2>;
611 pinctrl-names = "default";
612 pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
613 bus-width = <8>;
614 status = "okay";
615};
616
617&serial_0 {
618 assigned-clocks = <&cmu CLK_SCLK_UART0>;
619 assigned-clock-rates = <100000000>;
620 status = "okay";
621};
622
623&serial_1 {
624 status = "okay";
625};
626
627&tmu {
628 vtmu-supply = <&ldo7_reg>;
629 status = "okay";
630};
631
632&rtc {
633 clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
634 clock-names = "rtc", "rtc_src";
635 status = "okay";
636};
637
638&xusbxti {
639 clock-frequency = <24000000>;
640};
641
642&pinctrl_0 {
643 pinctrl-names = "default";
644 pinctrl-0 = <&initial0 &sleep0>;
645
646 initial0: initial-state {
647 PIN_IN(gpa1-4, DOWN, LV1);
648 PIN_IN(gpa1-5, DOWN, LV1);
649
650 PIN_IN(gpc0-0, DOWN, LV1);
651 PIN_IN(gpc0-1, DOWN, LV1);
652 PIN_IN(gpc0-2, DOWN, LV1);
653 PIN_IN(gpc0-3, DOWN, LV1);
654 PIN_IN(gpc0-4, DOWN, LV1);
655
656 PIN_IN(gpd0-0, DOWN, LV1);
657 PIN_IN(gpd0-1, DOWN, LV1);
658 };
659
660 sleep0: sleep-state {
661 PIN_SLP(gpa0-0, INPUT, DOWN);
662 PIN_SLP(gpa0-1, INPUT, DOWN);
663 PIN_SLP(gpa0-2, INPUT, DOWN);
664 PIN_SLP(gpa0-3, INPUT, DOWN);
665 PIN_SLP(gpa0-4, INPUT, DOWN);
666 PIN_SLP(gpa0-5, INPUT, DOWN);
667 PIN_SLP(gpa0-6, INPUT, DOWN);
668 PIN_SLP(gpa0-7, INPUT, DOWN);
669
670 PIN_SLP(gpa1-0, INPUT, DOWN);
671 PIN_SLP(gpa1-1, INPUT, DOWN);
672 PIN_SLP(gpa1-2, INPUT, DOWN);
673 PIN_SLP(gpa1-3, INPUT, DOWN);
674 PIN_SLP(gpa1-4, INPUT, DOWN);
675 PIN_SLP(gpa1-5, INPUT, DOWN);
676
677 PIN_SLP(gpb-0, PREV, NONE);
678 PIN_SLP(gpb-1, PREV, NONE);
679 PIN_SLP(gpb-2, PREV, NONE);
680 PIN_SLP(gpb-3, PREV, NONE);
681 PIN_SLP(gpb-4, INPUT, DOWN);
682 PIN_SLP(gpb-5, INPUT, DOWN);
683 PIN_SLP(gpb-6, INPUT, DOWN);
684 PIN_SLP(gpb-7, INPUT, DOWN);
685
686 PIN_SLP(gpc0-0, INPUT, DOWN);
687 PIN_SLP(gpc0-1, INPUT, DOWN);
688 PIN_SLP(gpc0-2, INPUT, DOWN);
689 PIN_SLP(gpc0-3, INPUT, DOWN);
690 PIN_SLP(gpc0-4, INPUT, DOWN);
691
692 PIN_SLP(gpc1-0, INPUT, DOWN);
693 PIN_SLP(gpc1-1, INPUT, DOWN);
694 PIN_SLP(gpc1-2, INPUT, DOWN);
695 PIN_SLP(gpc1-3, INPUT, DOWN);
696 PIN_SLP(gpc1-4, INPUT, DOWN);
697
698 PIN_SLP(gpd0-0, INPUT, DOWN);
699 PIN_SLP(gpd0-1, INPUT, DOWN);
700 PIN_SLP(gpd0-2, INPUT, NONE);
701 PIN_SLP(gpd0-3, INPUT, NONE);
702
703 PIN_SLP(gpd1-0, INPUT, NONE);
704 PIN_SLP(gpd1-1, INPUT, NONE);
705 PIN_SLP(gpd1-2, INPUT, NONE);
706 PIN_SLP(gpd1-3, INPUT, NONE);
707 };
708};
709
710&pinctrl_1 {
711 pinctrl-names = "default";
712 pinctrl-0 = <&initial1 &sleep1>;
713
714 initial1: initial-state {
715 PIN_IN(gpe0-6, DOWN, LV1);
716 PIN_IN(gpe0-7, DOWN, LV1);
717
718 PIN_IN(gpe1-0, DOWN, LV1);
719 PIN_IN(gpe1-3, DOWN, LV1);
720 PIN_IN(gpe1-4, DOWN, LV1);
721 PIN_IN(gpe1-5, DOWN, LV1);
722 PIN_IN(gpe1-6, DOWN, LV1);
723
724 PIN_IN(gpk2-0, DOWN, LV1);
725 PIN_IN(gpk2-1, DOWN, LV1);
726 PIN_IN(gpk2-2, DOWN, LV1);
727 PIN_IN(gpk2-3, DOWN, LV1);
728 PIN_IN(gpk2-4, DOWN, LV1);
729 PIN_IN(gpk2-5, DOWN, LV1);
730 PIN_IN(gpk2-6, DOWN, LV1);
731
732 PIN_IN(gpm0-0, DOWN, LV1);
733 PIN_IN(gpm0-1, DOWN, LV1);
734 PIN_IN(gpm0-2, DOWN, LV1);
735 PIN_IN(gpm0-3, DOWN, LV1);
736 PIN_IN(gpm0-4, DOWN, LV1);
737 PIN_IN(gpm0-5, DOWN, LV1);
738 PIN_IN(gpm0-6, DOWN, LV1);
739 PIN_IN(gpm0-7, DOWN, LV1);
740
741 PIN_IN(gpm1-0, DOWN, LV1);
742 PIN_IN(gpm1-1, DOWN, LV1);
743 PIN_IN(gpm1-2, DOWN, LV1);
744 PIN_IN(gpm1-3, DOWN, LV1);
745 PIN_IN(gpm1-4, DOWN, LV1);
746 PIN_IN(gpm1-5, DOWN, LV1);
747 PIN_IN(gpm1-6, DOWN, LV1);
748
749 PIN_IN(gpm2-0, DOWN, LV1);
750 PIN_IN(gpm2-1, DOWN, LV1);
751
752 PIN_IN(gpm3-0, DOWN, LV1);
753 PIN_IN(gpm3-1, DOWN, LV1);
754 PIN_IN(gpm3-2, DOWN, LV1);
755 PIN_IN(gpm3-3, DOWN, LV1);
756 PIN_IN(gpm3-4, DOWN, LV1);
757
758 PIN_IN(gpm4-1, DOWN, LV1);
759 PIN_IN(gpm4-2, DOWN, LV1);
760 PIN_IN(gpm4-3, DOWN, LV1);
761 PIN_IN(gpm4-4, DOWN, LV1);
762 PIN_IN(gpm4-5, DOWN, LV1);
763 PIN_IN(gpm4-6, DOWN, LV1);
764 PIN_IN(gpm4-7, DOWN, LV1);
765 };
766
767 sleep1: sleep-state {
768 PIN_SLP(gpe0-0, PREV, NONE);
769 PIN_SLP(gpe0-1, PREV, NONE);
770 PIN_SLP(gpe0-2, INPUT, DOWN);
771 PIN_SLP(gpe0-3, INPUT, UP);
772 PIN_SLP(gpe0-4, INPUT, DOWN);
773 PIN_SLP(gpe0-5, INPUT, DOWN);
774 PIN_SLP(gpe0-6, INPUT, DOWN);
775 PIN_SLP(gpe0-7, INPUT, DOWN);
776
777 PIN_SLP(gpe1-0, INPUT, DOWN);
778 PIN_SLP(gpe1-1, PREV, NONE);
779 PIN_SLP(gpe1-2, INPUT, DOWN);
780 PIN_SLP(gpe1-3, INPUT, DOWN);
781 PIN_SLP(gpe1-4, INPUT, DOWN);
782 PIN_SLP(gpe1-5, INPUT, DOWN);
783 PIN_SLP(gpe1-6, INPUT, DOWN);
784 PIN_SLP(gpe1-7, INPUT, NONE);
785
786 PIN_SLP(gpe2-0, INPUT, NONE);
787 PIN_SLP(gpe2-1, INPUT, NONE);
788 PIN_SLP(gpe2-2, INPUT, NONE);
789
790 PIN_SLP(gpk0-0, INPUT, DOWN);
791 PIN_SLP(gpk0-1, INPUT, DOWN);
792 PIN_SLP(gpk0-2, OUT0, NONE);
793 PIN_SLP(gpk0-3, INPUT, DOWN);
794 PIN_SLP(gpk0-4, INPUT, DOWN);
795 PIN_SLP(gpk0-5, INPUT, DOWN);
796 PIN_SLP(gpk0-6, INPUT, DOWN);
797 PIN_SLP(gpk0-7, INPUT, DOWN);
798
799 PIN_SLP(gpk1-0, INPUT, DOWN);
800 PIN_SLP(gpk1-1, INPUT, DOWN);
801 PIN_SLP(gpk1-2, INPUT, DOWN);
802 PIN_SLP(gpk1-3, INPUT, DOWN);
803 PIN_SLP(gpk1-4, INPUT, DOWN);
804 PIN_SLP(gpk1-5, INPUT, DOWN);
805 PIN_SLP(gpk1-6, INPUT, DOWN);
806
807 PIN_SLP(gpk2-0, INPUT, DOWN);
808 PIN_SLP(gpk2-1, INPUT, DOWN);
809 PIN_SLP(gpk2-2, INPUT, DOWN);
810 PIN_SLP(gpk2-3, INPUT, DOWN);
811 PIN_SLP(gpk2-4, INPUT, DOWN);
812 PIN_SLP(gpk2-5, INPUT, DOWN);
813 PIN_SLP(gpk2-6, INPUT, DOWN);
814
815 PIN_SLP(gpl0-0, INPUT, DOWN);
816 PIN_SLP(gpl0-1, INPUT, DOWN);
817 PIN_SLP(gpl0-2, INPUT, DOWN);
818 PIN_SLP(gpl0-3, INPUT, DOWN);
819
820 PIN_SLP(gpm0-0, INPUT, DOWN);
821 PIN_SLP(gpm0-1, INPUT, DOWN);
822 PIN_SLP(gpm0-2, INPUT, DOWN);
823 PIN_SLP(gpm0-3, INPUT, DOWN);
824 PIN_SLP(gpm0-4, INPUT, DOWN);
825 PIN_SLP(gpm0-5, INPUT, DOWN);
826 PIN_SLP(gpm0-6, INPUT, DOWN);
827 PIN_SLP(gpm0-7, INPUT, DOWN);
828
829 PIN_SLP(gpm1-0, INPUT, DOWN);
830 PIN_SLP(gpm1-1, INPUT, DOWN);
831 PIN_SLP(gpm1-2, INPUT, DOWN);
832 PIN_SLP(gpm1-3, INPUT, DOWN);
833 PIN_SLP(gpm1-4, INPUT, DOWN);
834 PIN_SLP(gpm1-5, INPUT, DOWN);
835 PIN_SLP(gpm1-6, INPUT, DOWN);
836
837 PIN_SLP(gpm2-0, INPUT, DOWN);
838 PIN_SLP(gpm2-1, INPUT, DOWN);
839 PIN_SLP(gpm2-2, INPUT, DOWN);
840 PIN_SLP(gpm2-3, INPUT, DOWN);
841 PIN_SLP(gpm2-4, INPUT, DOWN);
842
843 PIN_SLP(gpm3-0, INPUT, DOWN);
844 PIN_SLP(gpm3-1, INPUT, DOWN);
845 PIN_SLP(gpm3-2, INPUT, DOWN);
846 PIN_SLP(gpm3-3, INPUT, DOWN);
847 PIN_SLP(gpm3-4, INPUT, DOWN);
848 PIN_SLP(gpm3-5, INPUT, DOWN);
849 PIN_SLP(gpm3-6, INPUT, DOWN);
850 PIN_SLP(gpm3-7, INPUT, DOWN);
851
852 PIN_SLP(gpm4-0, INPUT, DOWN);
853 PIN_SLP(gpm4-1, INPUT, DOWN);
854 PIN_SLP(gpm4-2, INPUT, DOWN);
855 PIN_SLP(gpm4-3, INPUT, DOWN);
856 PIN_SLP(gpm4-4, INPUT, DOWN);
857 PIN_SLP(gpm4-5, INPUT, DOWN);
858 PIN_SLP(gpm4-6, INPUT, DOWN);
859 PIN_SLP(gpm4-7, INPUT, DOWN);
860 };
861};
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Samsung's Exynos3250 based Rinato board device tree source
4 *
5 * Copyright (c) 2014 Samsung Electronics Co., Ltd.
6 * http://www.samsung.com
7 *
8 * Device tree source file for Samsung's Rinato board which is based on
9 * Samsung Exynos3250 SoC.
10 */
11
12/dts-v1/;
13#include "exynos3250.dtsi"
14#include "exynos4412-ppmu-common.dtsi"
15#include <dt-bindings/input/input.h>
16#include <dt-bindings/gpio/gpio.h>
17#include <dt-bindings/clock/samsung,s2mps11.h>
18
19/ {
20 model = "Samsung Rinato board";
21 compatible = "samsung,rinato", "samsung,exynos3250", "samsung,exynos3";
22 chassis-type = "watch";
23
24 aliases {
25 i2c7 = &i2c_max77836;
26 };
27
28 chosen {
29 stdout-path = &serial_1;
30 };
31
32 memory@40000000 {
33 device_type = "memory";
34 reg = <0x40000000 0x1ff00000>;
35 };
36
37 firmware@205f000 {
38 compatible = "samsung,secure-firmware";
39 reg = <0x0205F000 0x1000>;
40 };
41
42 gpio-keys {
43 compatible = "gpio-keys";
44
45 power-key {
46 gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
47 linux,code = <KEY_POWER>;
48 label = "power key";
49 debounce-interval = <10>;
50 wakeup-source;
51 };
52 };
53
54 wlan_pwrseq: mshc1-pwrseq {
55 compatible = "mmc-pwrseq-simple";
56 reset-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
57 };
58
59 i2c_max77836: i2c-gpio-0 {
60 compatible = "i2c-gpio";
61 sda-gpios = <&gpd0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
62 scl-gpios = <&gpd0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
63 #address-cells = <1>;
64 #size-cells = <0>;
65
66 max77836: pmic@25 {
67 compatible = "maxim,max77836";
68 interrupt-parent = <&gpx1>;
69 interrupts = <5 IRQ_TYPE_NONE>;
70 reg = <0x25>;
71 wakeup-source;
72
73 extcon {
74 compatible = "maxim,max77836-muic";
75 };
76
77 regulators {
78 compatible = "maxim,max77836-regulator";
79 safeout_reg: SAFEOUT {
80 regulator-name = "SAFEOUT";
81 };
82
83 charger_reg: CHARGER {
84 regulator-name = "CHARGER";
85 regulator-min-microamp = <45000>;
86 regulator-max-microamp = <475000>;
87 regulator-boot-on;
88 };
89
90 motor_reg: LDO1 {
91 regulator-name = "MOT_2.7V";
92 regulator-min-microvolt = <1100000>;
93 regulator-max-microvolt = <2700000>;
94 };
95
96 LDO2 {
97 regulator-name = "UNUSED_LDO2";
98 regulator-min-microvolt = <800000>;
99 regulator-max-microvolt = <3950000>;
100 };
101 };
102
103 charger {
104 compatible = "maxim,max77836-charger";
105
106 maxim,constant-uvolt = <4350000>;
107 maxim,fast-charge-uamp = <225000>;
108 maxim,eoc-uamp = <7500>;
109 maxim,ovp-uvolt = <6500000>;
110 };
111 };
112 };
113
114 haptics {
115 compatible = "regulator-haptic";
116 haptic-supply = <&motor_reg>;
117 min-microvolt = <1100000>;
118 max-microvolt = <2700000>;
119 };
120
121 thermal-zones {
122 cpu_thermal: cpu-thermal {
123 cooling-maps {
124 map0 {
125 /* Corresponds to 500MHz */
126 cooling-device = <&cpu0 5 5>,
127 <&cpu1 5 5>;
128 };
129 map1 {
130 /* Corresponds to 200MHz */
131 cooling-device = <&cpu0 8 8>,
132 <&cpu1 8 8>;
133 };
134 };
135 };
136 };
137};
138
139&adc {
140 vdd-supply = <&ldo3_reg>;
141 status = "okay";
142 assigned-clocks = <&cmu CLK_SCLK_TSADC>;
143 assigned-clock-rates = <6000000>;
144
145 thermistor-ap {
146 compatible = "murata,ncp15wb473";
147 pullup-uv = <1800000>;
148 pullup-ohm = <100000>;
149 pulldown-ohm = <100000>;
150 io-channels = <&adc 0>;
151 };
152
153 thermistor-battery {
154 compatible = "murata,ncp15wb473";
155 pullup-uv = <1800000>;
156 pullup-ohm = <100000>;
157 pulldown-ohm = <100000>;
158 io-channels = <&adc 1>;
159 };
160};
161
162&bus_dmc {
163 devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
164 vdd-supply = <&buck1_reg>;
165 status = "okay";
166};
167
168&bus_leftbus {
169 devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
170 vdd-supply = <&buck3_reg>;
171 status = "okay";
172};
173
174&bus_rightbus {
175 devfreq = <&bus_leftbus>;
176 status = "okay";
177};
178
179&bus_lcd0 {
180 devfreq = <&bus_leftbus>;
181 status = "okay";
182};
183
184&bus_fsys {
185 devfreq = <&bus_leftbus>;
186 status = "okay";
187};
188
189&bus_mcuisp {
190 devfreq = <&bus_leftbus>;
191 status = "okay";
192};
193
194&bus_isp {
195 devfreq = <&bus_leftbus>;
196 status = "okay";
197};
198
199&bus_peril {
200 devfreq = <&bus_leftbus>;
201 status = "okay";
202};
203
204&bus_mfc {
205 devfreq = <&bus_leftbus>;
206 status = "okay";
207};
208
209&cmu {
210 clocks = <&xusbxti>;
211};
212
213&cpu0 {
214 cpu0-supply = <&buck2_reg>;
215};
216
217&exynos_usbphy {
218 status = "okay";
219 vbus-supply = <&safeout_reg>;
220};
221
222&hsotg {
223 vusb_d-supply = <&ldo15_reg>;
224 vusb_a-supply = <&ldo12_reg>;
225 dr_mode = "peripheral";
226 status = "okay";
227};
228
229&dsi_0 {
230 vddcore-supply = <&ldo6_reg>;
231 vddio-supply = <&ldo6_reg>;
232 samsung,burst-clock-frequency = <250000000>;
233 samsung,esc-clock-frequency = <20000000>;
234 samsung,pll-clock-frequency = <24000000>;
235 status = "okay";
236
237 panel@0 {
238 compatible = "samsung,s6e63j0x03";
239 reg = <0>;
240 vdd3-supply = <&ldo16_reg>;
241 vci-supply = <&ldo20_reg>;
242 reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>;
243 te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
244 };
245};
246
247&fimd {
248 status = "okay";
249
250 i80-if-timings {
251 cs-setup = <0>;
252 wr-setup = <0>;
253 wr-act = <1>;
254 wr-hold = <0>;
255 };
256};
257
258&gpu {
259 mali-supply = <&buck3_reg>;
260 status = "okay";
261};
262
263&i2c_0 {
264 #address-cells = <1>;
265 #size-cells = <0>;
266 samsung,i2c-sda-delay = <100>;
267 samsung,i2c-slave-addr = <0x10>;
268 samsung,i2c-max-bus-freq = <100000>;
269 status = "okay";
270
271 pmic@66 {
272 compatible = "samsung,s2mps14-pmic";
273 interrupt-parent = <&gpx0>;
274 interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
275 reg = <0x66>;
276 wakeup-source;
277
278 s2mps14_osc: clocks {
279 compatible = "samsung,s2mps14-clk";
280 #clock-cells = <1>;
281 clock-output-names = "s2mps14_ap", "unused",
282 "s2mps14_bt";
283 };
284
285 regulators {
286 ldo1_reg: LDO1 {
287 regulator-name = "VAP_ALIVE_1.0V";
288 regulator-min-microvolt = <1000000>;
289 regulator-max-microvolt = <1000000>;
290 regulator-always-on;
291
292 regulator-state-mem {
293 regulator-on-in-suspend;
294 };
295 };
296
297 ldo2_reg: LDO2 {
298 regulator-name = "VAP_M1_1.2V";
299 regulator-min-microvolt = <1200000>;
300 regulator-max-microvolt = <1200000>;
301 regulator-always-on;
302
303 regulator-state-mem {
304 regulator-off-in-suspend;
305 };
306 };
307
308 ldo3_reg: LDO3 {
309 regulator-name = "VCC_AP_1.8V";
310 regulator-min-microvolt = <1800000>;
311 regulator-max-microvolt = <1800000>;
312 regulator-always-on;
313
314 regulator-state-mem {
315 regulator-off-in-suspend;
316 };
317 };
318
319 ldo4_reg: LDO4 {
320 regulator-name = "VAP_AVDD_PLL1";
321 regulator-min-microvolt = <1800000>;
322 regulator-max-microvolt = <1800000>;
323 regulator-always-on;
324
325 regulator-state-mem {
326 regulator-off-in-suspend;
327 };
328 };
329
330 ldo5_reg: LDO5 {
331 regulator-name = "VAP_PLL_ISO_1.0V";
332 regulator-min-microvolt = <1000000>;
333 regulator-max-microvolt = <1000000>;
334 regulator-always-on;
335
336 regulator-state-mem {
337 regulator-off-in-suspend;
338 };
339 };
340
341 ldo6_reg: LDO6 {
342 regulator-name = "VAP_VMIPI_1.0V";
343 regulator-min-microvolt = <1000000>;
344 regulator-max-microvolt = <1000000>;
345 regulator-always-on;
346
347 regulator-state-mem {
348 regulator-off-in-suspend;
349 };
350 };
351
352 ldo7_reg: LDO7 {
353 regulator-name = "VAP_AVDD_1.8V";
354 regulator-min-microvolt = <1800000>;
355 regulator-max-microvolt = <1800000>;
356 regulator-always-on;
357
358 regulator-state-mem {
359 regulator-off-in-suspend;
360 };
361 };
362
363 ldo8_reg: LDO8 {
364 regulator-name = "VAP_USB_3.0V";
365 regulator-min-microvolt = <3000000>;
366 regulator-max-microvolt = <3000000>;
367 regulator-always-on;
368
369 regulator-state-mem {
370 regulator-off-in-suspend;
371 };
372 };
373
374 ldo9_reg: LDO9 {
375 regulator-name = "V_LPDDR_1.2V";
376 regulator-min-microvolt = <1200000>;
377 regulator-max-microvolt = <1200000>;
378 regulator-always-on;
379
380 regulator-state-mem {
381 regulator-on-in-suspend;
382 };
383 };
384
385 ldo10_reg: LDO10 {
386 regulator-name = "UNUSED_LDO10";
387 regulator-min-microvolt = <1000000>;
388 regulator-max-microvolt = <1000000>;
389
390 regulator-state-mem {
391 regulator-off-in-suspend;
392 };
393 };
394
395 ldo11_reg: LDO11 {
396 regulator-name = "V_EMMC_1.8V";
397 regulator-min-microvolt = <1800000>;
398 regulator-max-microvolt = <1800000>;
399 samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
400 };
401
402 ldo12_reg: LDO12 {
403 regulator-name = "V_EMMC_2.8V";
404 regulator-min-microvolt = <2800000>;
405 regulator-max-microvolt = <2800000>;
406 samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
407 };
408
409 ldo13_reg: LDO13 {
410 regulator-name = "CAM_AVDD_2.8V";
411 regulator-min-microvolt = <2800000>;
412 regulator-max-microvolt = <2800000>;
413
414 regulator-state-mem {
415 regulator-off-in-suspend;
416 };
417 };
418
419 ldo14_reg: LDO14 {
420 regulator-name = "UNUSED_LDO14";
421 regulator-min-microvolt = <2700000>;
422 regulator-max-microvolt = <2700000>;
423
424 regulator-state-mem {
425 regulator-off-in-suspend;
426 };
427 };
428
429 ldo15_reg: LDO15 {
430 regulator-name = "TSP_AVDD_3.3V";
431 regulator-min-microvolt = <3300000>;
432 regulator-max-microvolt = <3300000>;
433
434 regulator-state-mem {
435 regulator-off-in-suspend;
436 };
437 };
438
439 ldo16_reg: LDO16 {
440 regulator-name = "LCD_VDD_3.3V";
441 regulator-min-microvolt = <3300000>;
442 regulator-max-microvolt = <3300000>;
443
444 regulator-state-mem {
445 regulator-off-in-suspend;
446 };
447 };
448
449 ldo17_reg: LDO17 {
450 regulator-name = "V_IRLED_3.3V";
451 regulator-min-microvolt = <3300000>;
452 regulator-max-microvolt = <3300000>;
453
454 regulator-state-mem {
455 regulator-off-in-suspend;
456 };
457 };
458
459 ldo18_reg: LDO18 {
460 regulator-name = "CAM_AF_2.8V";
461 regulator-min-microvolt = <2800000>;
462 regulator-max-microvolt = <2800000>;
463
464 regulator-state-mem {
465 regulator-off-in-suspend;
466 };
467 };
468
469 ldo19_reg: LDO19 {
470 regulator-name = "TSP_VDD_1.8V";
471 regulator-min-microvolt = <1800000>;
472 regulator-max-microvolt = <1800000>;
473
474 regulator-state-mem {
475 regulator-off-in-suspend;
476 };
477 };
478
479 ldo20_reg: LDO20 {
480 regulator-name = "LCD_VDD_1.8V";
481 regulator-min-microvolt = <1800000>;
482 regulator-max-microvolt = <1800000>;
483
484 regulator-state-mem {
485 regulator-off-in-suspend;
486 };
487 };
488
489 ldo21_reg: LDO21 {
490 regulator-name = "CAM_IO_1.8V";
491 regulator-min-microvolt = <1800000>;
492 regulator-max-microvolt = <1800000>;
493
494 regulator-state-mem {
495 regulator-off-in-suspend;
496 };
497 };
498
499 ldo22_reg: LDO22 {
500 regulator-name = "CAM_DVDD_1.2V";
501 regulator-min-microvolt = <1200000>;
502 regulator-max-microvolt = <1200000>;
503
504 regulator-state-mem {
505 regulator-off-in-suspend;
506 };
507 };
508
509 ldo23_reg: LDO23 {
510 regulator-name = "HRM_VCC_1.8V";
511 regulator-min-microvolt = <1800000>;
512 regulator-max-microvolt = <1800000>;
513 regulator-always-on;
514 };
515
516 ldo24_reg: LDO24 {
517 regulator-name = "HRM_VCC_3.3V";
518 regulator-min-microvolt = <3000000>;
519 regulator-max-microvolt = <3000000>;
520
521 regulator-state-mem {
522 regulator-off-in-suspend;
523 };
524 };
525
526 ldo25_reg: LDO25 {
527 regulator-name = "UNUSED_LDO25";
528 regulator-min-microvolt = <3000000>;
529 regulator-max-microvolt = <3000000>;
530
531 regulator-state-mem {
532 regulator-off-in-suspend;
533 };
534 };
535
536 buck1_reg: BUCK1 {
537 regulator-name = "VAP_MIF_1.0V";
538 regulator-min-microvolt = <800000>;
539 regulator-max-microvolt = <900000>;
540 regulator-always-on;
541
542 regulator-state-mem {
543 regulator-off-in-suspend;
544 };
545 };
546
547 buck2_reg: BUCK2 {
548 regulator-name = "VAP_ARM_1.0V";
549 regulator-min-microvolt = <850000>;
550 regulator-max-microvolt = <1150000>;
551 regulator-always-on;
552
553 regulator-state-mem {
554 regulator-off-in-suspend;
555 };
556 };
557
558 buck3_reg: BUCK3 {
559 regulator-name = "VAP_INT3D_1.0V";
560 regulator-min-microvolt = <850000>;
561 regulator-max-microvolt = <1000000>;
562 regulator-always-on;
563
564 regulator-state-mem {
565 regulator-off-in-suspend;
566 };
567 };
568
569 buck4_reg: BUCK4 {
570 regulator-name = "VCC_SUB_1.95V";
571 regulator-min-microvolt = <1950000>;
572 regulator-max-microvolt = <1950000>;
573 regulator-always-on;
574
575 regulator-state-mem {
576 regulator-on-in-suspend;
577 };
578 };
579
580 buck5_reg: BUCK5 {
581 regulator-name = "VCC_SUB_1.35V";
582 regulator-min-microvolt = <1350000>;
583 regulator-max-microvolt = <1350000>;
584 regulator-always-on;
585
586 regulator-state-mem {
587 regulator-on-in-suspend;
588 };
589 };
590 };
591 };
592};
593
594&i2c_1 {
595 #address-cells = <1>;
596 #size-cells = <0>;
597 samsung,i2c-sda-delay = <100>;
598 samsung,i2c-slave-addr = <0x10>;
599 samsung,i2c-max-bus-freq = <400000>;
600 status = "okay";
601
602 fuelgauge@36 {
603 compatible = "maxim,max77836-battery";
604 interrupt-parent = <&gpx1>;
605 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
606 reg = <0x36>;
607 };
608};
609
610&i2s2 {
611 status = "okay";
612};
613
614&jpeg {
615 status = "okay";
616};
617
618&mshc_0 {
619 broken-cd;
620 non-removable;
621 cap-mmc-highspeed;
622 desc-num = <4>;
623 mmc-hs200-1_8v;
624 card-detect-delay = <200>;
625 vmmc-supply = <&ldo12_reg>;
626 clock-frequency = <100000000>;
627 max-frequency = <100000000>;
628 samsung,dw-mshc-ciu-div = <1>;
629 samsung,dw-mshc-sdr-timing = <0 1>;
630 samsung,dw-mshc-ddr-timing = <1 2>;
631 pinctrl-names = "default";
632 pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
633 bus-width = <8>;
634 status = "okay";
635};
636
637&mshc_1 {
638 status = "okay";
639
640 #address-cells = <1>;
641 #size-cells = <0>;
642
643 non-removable;
644 cap-sd-highspeed;
645 cap-sdio-irq;
646 keep-power-in-suspend;
647 samsung,dw-mshc-ciu-div = <1>;
648 samsung,dw-mshc-sdr-timing = <0 1>;
649 samsung,dw-mshc-ddr-timing = <1 2>;
650 pinctrl-names = "default";
651 pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus1 &sd1_bus4>;
652 bus-width = <4>;
653
654 mmc-pwrseq = <&wlan_pwrseq>;
655
656 brcmf: wifi@1 {
657 compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac";
658 reg = <1>;
659
660 interrupt-parent = <&gpx1>;
661 interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
662 interrupt-names = "host-wake";
663 };
664};
665
666&serial_0 {
667 assigned-clocks = <&cmu CLK_SCLK_UART0>;
668 assigned-clock-rates = <100000000>;
669 status = "okay";
670
671 bluetooth {
672 compatible = "brcm,bcm4330-bt";
673 max-speed = <3000000>;
674 shutdown-gpios = <&gpe0 0 GPIO_ACTIVE_HIGH>;
675 device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
676 host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
677 clocks = <&s2mps14_osc S2MPS11_CLK_BT>;
678 };
679};
680
681&serial_1 {
682 status = "okay";
683};
684
685&tmu {
686 vtmu-supply = <&ldo7_reg>;
687 status = "okay";
688};
689
690&rtc {
691 clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
692 clock-names = "rtc", "rtc_src";
693 status = "okay";
694};
695
696&xusbxti {
697 clock-frequency = <24000000>;
698};
699
700&pinctrl_0 {
701 pinctrl-names = "default";
702 pinctrl-0 = <&initial0 &sleep0>;
703
704 initial0: initial-state {
705 PIN_IN(gpa1-4, DOWN, LV1);
706 PIN_IN(gpa1-5, DOWN, LV1);
707
708 PIN_IN(gpc0-0, DOWN, LV1);
709 PIN_IN(gpc0-1, DOWN, LV1);
710 PIN_IN(gpc0-2, DOWN, LV1);
711 PIN_IN(gpc0-3, DOWN, LV1);
712 PIN_IN(gpc0-4, DOWN, LV1);
713
714 PIN_IN(gpd0-0, DOWN, LV1);
715 PIN_IN(gpd0-1, DOWN, LV1);
716 };
717
718 sleep0: sleep-state {
719 PIN_SLP(gpa0-0, INPUT, DOWN);
720 PIN_SLP(gpa0-1, INPUT, DOWN);
721 PIN_SLP(gpa0-2, INPUT, DOWN);
722 PIN_SLP(gpa0-3, INPUT, DOWN);
723 PIN_SLP(gpa0-4, INPUT, DOWN);
724 PIN_SLP(gpa0-5, INPUT, DOWN);
725 PIN_SLP(gpa0-6, INPUT, DOWN);
726 PIN_SLP(gpa0-7, INPUT, DOWN);
727
728 PIN_SLP(gpa1-0, INPUT, DOWN);
729 PIN_SLP(gpa1-1, INPUT, DOWN);
730 PIN_SLP(gpa1-2, INPUT, DOWN);
731 PIN_SLP(gpa1-3, INPUT, DOWN);
732 PIN_SLP(gpa1-4, INPUT, DOWN);
733 PIN_SLP(gpa1-5, INPUT, DOWN);
734
735 PIN_SLP(gpb-0, PREV, NONE);
736 PIN_SLP(gpb-1, PREV, NONE);
737 PIN_SLP(gpb-2, PREV, NONE);
738 PIN_SLP(gpb-3, PREV, NONE);
739 PIN_SLP(gpb-4, INPUT, DOWN);
740 PIN_SLP(gpb-5, INPUT, DOWN);
741 PIN_SLP(gpb-6, INPUT, DOWN);
742 PIN_SLP(gpb-7, INPUT, DOWN);
743
744 PIN_SLP(gpc0-0, INPUT, DOWN);
745 PIN_SLP(gpc0-1, INPUT, DOWN);
746 PIN_SLP(gpc0-2, INPUT, DOWN);
747 PIN_SLP(gpc0-3, INPUT, DOWN);
748 PIN_SLP(gpc0-4, INPUT, DOWN);
749
750 PIN_SLP(gpc1-0, INPUT, DOWN);
751 PIN_SLP(gpc1-1, INPUT, DOWN);
752 PIN_SLP(gpc1-2, INPUT, DOWN);
753 PIN_SLP(gpc1-3, INPUT, DOWN);
754 PIN_SLP(gpc1-4, INPUT, DOWN);
755
756 PIN_SLP(gpd0-0, INPUT, DOWN);
757 PIN_SLP(gpd0-1, INPUT, DOWN);
758 PIN_SLP(gpd0-2, INPUT, NONE);
759 PIN_SLP(gpd0-3, INPUT, NONE);
760
761 PIN_SLP(gpd1-0, INPUT, NONE);
762 PIN_SLP(gpd1-1, INPUT, NONE);
763 PIN_SLP(gpd1-2, INPUT, NONE);
764 PIN_SLP(gpd1-3, INPUT, NONE);
765 };
766};
767
768&pinctrl_1 {
769 pinctrl-names = "default";
770 pinctrl-0 = <&initial1 &sleep1>;
771
772 initial1: initial-state {
773 PIN_IN(gpe0-6, DOWN, LV1);
774 PIN_IN(gpe0-7, DOWN, LV1);
775
776 PIN_IN(gpe1-0, DOWN, LV1);
777 PIN_IN(gpe1-3, DOWN, LV1);
778 PIN_IN(gpe1-4, DOWN, LV1);
779 PIN_IN(gpe1-5, DOWN, LV1);
780 PIN_IN(gpe1-6, DOWN, LV1);
781
782 PIN_IN(gpk2-0, DOWN, LV1);
783 PIN_IN(gpk2-1, DOWN, LV1);
784 PIN_IN(gpk2-2, DOWN, LV1);
785 PIN_IN(gpk2-3, DOWN, LV1);
786 PIN_IN(gpk2-4, DOWN, LV1);
787 PIN_IN(gpk2-5, DOWN, LV1);
788 PIN_IN(gpk2-6, DOWN, LV1);
789
790 PIN_IN(gpm0-0, DOWN, LV1);
791 PIN_IN(gpm0-1, DOWN, LV1);
792 PIN_IN(gpm0-2, DOWN, LV1);
793 PIN_IN(gpm0-3, DOWN, LV1);
794 PIN_IN(gpm0-4, DOWN, LV1);
795 PIN_IN(gpm0-5, DOWN, LV1);
796 PIN_IN(gpm0-6, DOWN, LV1);
797 PIN_IN(gpm0-7, DOWN, LV1);
798
799 PIN_IN(gpm1-0, DOWN, LV1);
800 PIN_IN(gpm1-1, DOWN, LV1);
801 PIN_IN(gpm1-2, DOWN, LV1);
802 PIN_IN(gpm1-3, DOWN, LV1);
803 PIN_IN(gpm1-4, DOWN, LV1);
804 PIN_IN(gpm1-5, DOWN, LV1);
805 PIN_IN(gpm1-6, DOWN, LV1);
806
807 PIN_IN(gpm2-0, DOWN, LV1);
808 PIN_IN(gpm2-1, DOWN, LV1);
809
810 PIN_IN(gpm3-0, DOWN, LV1);
811 PIN_IN(gpm3-1, DOWN, LV1);
812 PIN_IN(gpm3-2, DOWN, LV1);
813 PIN_IN(gpm3-3, DOWN, LV1);
814 PIN_IN(gpm3-4, DOWN, LV1);
815
816 PIN_IN(gpm4-1, DOWN, LV1);
817 PIN_IN(gpm4-2, DOWN, LV1);
818 PIN_IN(gpm4-3, DOWN, LV1);
819 PIN_IN(gpm4-4, DOWN, LV1);
820 PIN_IN(gpm4-5, DOWN, LV1);
821 PIN_IN(gpm4-6, DOWN, LV1);
822 PIN_IN(gpm4-7, DOWN, LV1);
823 };
824
825 sleep1: sleep-state {
826 PIN_SLP(gpe0-0, PREV, NONE);
827 PIN_SLP(gpe0-1, PREV, NONE);
828 PIN_SLP(gpe0-2, INPUT, DOWN);
829 PIN_SLP(gpe0-3, INPUT, UP);
830 PIN_SLP(gpe0-4, INPUT, DOWN);
831 PIN_SLP(gpe0-5, INPUT, DOWN);
832 PIN_SLP(gpe0-6, INPUT, DOWN);
833 PIN_SLP(gpe0-7, INPUT, DOWN);
834
835 PIN_SLP(gpe1-0, INPUT, DOWN);
836 PIN_SLP(gpe1-1, PREV, NONE);
837 PIN_SLP(gpe1-2, INPUT, DOWN);
838 PIN_SLP(gpe1-3, INPUT, DOWN);
839 PIN_SLP(gpe1-4, INPUT, DOWN);
840 PIN_SLP(gpe1-5, INPUT, DOWN);
841 PIN_SLP(gpe1-6, INPUT, DOWN);
842 PIN_SLP(gpe1-7, INPUT, NONE);
843
844 PIN_SLP(gpe2-0, INPUT, NONE);
845 PIN_SLP(gpe2-1, INPUT, NONE);
846 PIN_SLP(gpe2-2, INPUT, NONE);
847
848 PIN_SLP(gpk0-0, INPUT, DOWN);
849 PIN_SLP(gpk0-1, INPUT, DOWN);
850 PIN_SLP(gpk0-2, OUT0, NONE);
851 PIN_SLP(gpk0-3, INPUT, DOWN);
852 PIN_SLP(gpk0-4, INPUT, DOWN);
853 PIN_SLP(gpk0-5, INPUT, DOWN);
854 PIN_SLP(gpk0-6, INPUT, DOWN);
855 PIN_SLP(gpk0-7, INPUT, DOWN);
856
857 PIN_SLP(gpk1-0, INPUT, DOWN);
858 PIN_SLP(gpk1-1, INPUT, DOWN);
859 PIN_SLP(gpk1-2, INPUT, DOWN);
860 PIN_SLP(gpk1-3, INPUT, DOWN);
861 PIN_SLP(gpk1-4, INPUT, DOWN);
862 PIN_SLP(gpk1-5, INPUT, DOWN);
863 PIN_SLP(gpk1-6, INPUT, DOWN);
864
865 PIN_SLP(gpk2-0, INPUT, DOWN);
866 PIN_SLP(gpk2-1, INPUT, DOWN);
867 PIN_SLP(gpk2-2, INPUT, DOWN);
868 PIN_SLP(gpk2-3, INPUT, DOWN);
869 PIN_SLP(gpk2-4, INPUT, DOWN);
870 PIN_SLP(gpk2-5, INPUT, DOWN);
871 PIN_SLP(gpk2-6, INPUT, DOWN);
872
873 PIN_SLP(gpl0-0, INPUT, DOWN);
874 PIN_SLP(gpl0-1, INPUT, DOWN);
875 PIN_SLP(gpl0-2, INPUT, DOWN);
876 PIN_SLP(gpl0-3, INPUT, DOWN);
877
878 PIN_SLP(gpm0-0, INPUT, DOWN);
879 PIN_SLP(gpm0-1, INPUT, DOWN);
880 PIN_SLP(gpm0-2, INPUT, DOWN);
881 PIN_SLP(gpm0-3, INPUT, DOWN);
882 PIN_SLP(gpm0-4, INPUT, DOWN);
883 PIN_SLP(gpm0-5, INPUT, DOWN);
884 PIN_SLP(gpm0-6, INPUT, DOWN);
885 PIN_SLP(gpm0-7, INPUT, DOWN);
886
887 PIN_SLP(gpm1-0, INPUT, DOWN);
888 PIN_SLP(gpm1-1, INPUT, DOWN);
889 PIN_SLP(gpm1-2, INPUT, DOWN);
890 PIN_SLP(gpm1-3, INPUT, DOWN);
891 PIN_SLP(gpm1-4, INPUT, DOWN);
892 PIN_SLP(gpm1-5, INPUT, DOWN);
893 PIN_SLP(gpm1-6, INPUT, DOWN);
894
895 PIN_SLP(gpm2-0, INPUT, DOWN);
896 PIN_SLP(gpm2-1, INPUT, DOWN);
897 PIN_SLP(gpm2-2, INPUT, DOWN);
898 PIN_SLP(gpm2-3, INPUT, DOWN);
899 PIN_SLP(gpm2-4, INPUT, DOWN);
900
901 PIN_SLP(gpm3-0, INPUT, DOWN);
902 PIN_SLP(gpm3-1, INPUT, DOWN);
903 PIN_SLP(gpm3-2, INPUT, DOWN);
904 PIN_SLP(gpm3-3, INPUT, DOWN);
905 PIN_SLP(gpm3-4, INPUT, DOWN);
906 PIN_SLP(gpm3-5, INPUT, DOWN);
907 PIN_SLP(gpm3-6, INPUT, DOWN);
908 PIN_SLP(gpm3-7, INPUT, DOWN);
909
910 PIN_SLP(gpm4-0, INPUT, DOWN);
911 PIN_SLP(gpm4-1, INPUT, DOWN);
912 PIN_SLP(gpm4-2, INPUT, DOWN);
913 PIN_SLP(gpm4-3, INPUT, DOWN);
914 PIN_SLP(gpm4-4, INPUT, DOWN);
915 PIN_SLP(gpm4-5, INPUT, DOWN);
916 PIN_SLP(gpm4-6, INPUT, DOWN);
917 PIN_SLP(gpm4-7, INPUT, DOWN);
918 };
919};