Linux Audio

Check our new training course

Loading...
v4.17
  1// SPDX-License-Identifier: GPL-2.0
  2/*
  3 * Samsung's Exynos3250 based Rinato board device tree source
  4 *
  5 * Copyright (c) 2014 Samsung Electronics Co., Ltd.
  6 *		http://www.samsung.com
  7 *
  8 * Device tree source file for Samsung's Rinato board which is based on
  9 * Samsung Exynos3250 SoC.
 
 
 
 
 10 */
 11
 12/dts-v1/;
 13#include "exynos3250.dtsi"
 14#include "exynos4412-ppmu-common.dtsi"
 15#include <dt-bindings/input/input.h>
 16#include <dt-bindings/gpio/gpio.h>
 17#include <dt-bindings/clock/samsung,s2mps11.h>
 18
 19/ {
 20	model = "Samsung Rinato board";
 21	compatible = "samsung,rinato", "samsung,exynos3250", "samsung,exynos3";
 22
 23	aliases {
 24		i2c7 = &i2c_max77836;
 25	};
 26
 27	memory@40000000 {
 28		device_type = "memory";
 29		reg =  <0x40000000 0x1ff00000>;
 30	};
 31
 32	firmware@205f000 {
 33		compatible = "samsung,secure-firmware";
 34		reg = <0x0205F000 0x1000>;
 35	};
 36
 37	gpio_keys {
 38		compatible = "gpio-keys";
 39
 40		power_key {
 41			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
 42			linux,code = <KEY_POWER>;
 43			label = "power key";
 44			debounce-interval = <10>;
 45			wakeup-source;
 46		};
 47	};
 48
 49	i2c_max77836: i2c-gpio-0 {
 50		compatible = "i2c-gpio";
 51		gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>;
 52		#address-cells = <1>;
 53		#size-cells = <0>;
 54
 55		max77836: subpmic@25 {
 56			compatible = "maxim,max77836";
 57			interrupt-parent = <&gpx1>;
 58			interrupts = <5 IRQ_TYPE_NONE>;
 59			reg = <0x25>;
 60			wakeup-source;
 61
 62			muic: max77836-muic {
 63				compatible = "maxim,max77836-muic";
 64			};
 65
 66			regulators {
 67				compatible = "maxim,max77836-regulator";
 68				safeout_reg: SAFEOUT {
 69					regulator-name = "SAFEOUT";
 70				};
 71
 72				charger_reg: CHARGER {
 73					regulator-name = "CHARGER";
 74					regulator-min-microamp = <45000>;
 75					regulator-max-microamp = <475000>;
 76					regulator-boot-on;
 77				};
 78
 79				motor_reg: LDO1 {
 80					regulator-name = "MOT_2.7V";
 81					regulator-min-microvolt = <1100000>;
 82					regulator-max-microvolt = <2700000>;
 83				};
 84
 85				LDO2 {
 86					regulator-name = "UNUSED_LDO2";
 87					regulator-min-microvolt = <800000>;
 88					regulator-max-microvolt = <3950000>;
 89				};
 90			};
 91
 92			charger {
 93				compatible = "maxim,max77836-charger";
 94
 95				maxim,constant-uvolt = <4350000>;
 96				maxim,fast-charge-uamp = <225000>;
 97				maxim,eoc-uamp = <7500>;
 98				maxim,ovp-uvolt = <6500000>;
 99			};
100		};
101	};
102
103	haptics {
104		compatible = "regulator-haptic";
105		haptic-supply = <&motor_reg>;
106		min-microvolt = <1100000>;
107		max-microvolt = <2700000>;
108	};
109
110	thermal-zones {
111		cpu_thermal: cpu-thermal {
112			cooling-maps {
113				map0 {
114					/* Corresponds to 500MHz */
115					cooling-device = <&cpu0 5 5>;
116				};
117				map1 {
118					/* Corresponds to 200MHz */
119					cooling-device = <&cpu0 8 8>;
120				};
121			};
122		};
123	};
124};
125
126&adc {
127	vdd-supply = <&ldo3_reg>;
128	status = "okay";
129	assigned-clocks = <&cmu CLK_SCLK_TSADC>;
130	assigned-clock-rates = <6000000>;
131
132	thermistor-ap {
133		compatible = "ntc,ncp15wb473";
134		pullup-uv = <1800000>;
135		pullup-ohm = <100000>;
136		pulldown-ohm = <100000>;
137		io-channels = <&adc 0>;
138	};
139
140	thermistor-battery {
141		compatible = "ntc,ncp15wb473";
142		pullup-uv = <1800000>;
143		pullup-ohm = <100000>;
144		pulldown-ohm = <100000>;
145		io-channels = <&adc 1>;
146	};
147};
148
149&bus_dmc {
150	devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
151	vdd-supply = <&buck1_reg>;
152	status = "okay";
153};
154
155&bus_leftbus {
156	devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
157	vdd-supply = <&buck3_reg>;
158	status = "okay";
159};
160
161&bus_rightbus {
162	devfreq = <&bus_leftbus>;
163	status = "okay";
164};
165
166&bus_lcd0 {
167	devfreq = <&bus_leftbus>;
168	status = "okay";
169};
170
171&bus_fsys {
172	devfreq = <&bus_leftbus>;
173	status = "okay";
174};
175
176&bus_mcuisp {
177	devfreq = <&bus_leftbus>;
178	status = "okay";
179};
180
181&bus_isp {
182	devfreq = <&bus_leftbus>;
183	status = "okay";
184};
185
186&bus_peril {
187	devfreq = <&bus_leftbus>;
188	status = "okay";
189};
190
191&bus_mfc {
192	devfreq = <&bus_leftbus>;
193	status = "okay";
194};
195
196&cpu0 {
197	cpu0-supply = <&buck2_reg>;
198};
199
200&exynos_usbphy {
201	status = "okay";
202	vbus-supply = <&safeout_reg>;
203};
204
205&hsotg {
206	vusb_d-supply = <&ldo15_reg>;
207	vusb_a-supply = <&ldo12_reg>;
208	dr_mode = "peripheral";
209	status = "okay";
210};
211
212&dsi_0 {
213	vddcore-supply = <&ldo6_reg>;
214	vddio-supply = <&ldo6_reg>;
215	samsung,burst-clock-frequency = <250000000>;
216	samsung,esc-clock-frequency = <20000000>;
217	samsung,pll-clock-frequency = <24000000>;
218	status = "okay";
219
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
220	panel@0 {
221		compatible = "samsung,s6e63j0x03";
222		reg = <0>;
223		vdd3-supply = <&ldo16_reg>;
224		vci-supply = <&ldo20_reg>;
225		reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>;
226		te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
227	};
228};
229
230&fimd {
231	status = "okay";
232
233	i80-if-timings {
234		cs-setup = <0>;
235		wr-setup = <0>;
236		wr-act = <1>;
237		wr-hold = <0>;
238	};
239};
240
241&i2c_0 {
242	#address-cells = <1>;
243	#size-cells = <0>;
244	samsung,i2c-sda-delay = <100>;
245	samsung,i2c-slave-addr = <0x10>;
246	samsung,i2c-max-bus-freq = <100000>;
247	status = "okay";
248
249	s2mps14_pmic@66 {
250		compatible = "samsung,s2mps14-pmic";
251		interrupt-parent = <&gpx0>;
252		interrupts = <7 IRQ_TYPE_NONE>;
253		reg = <0x66>;
254		wakeup-source;
255
256		s2mps14_osc: clocks {
257			compatible = "samsung,s2mps14-clk";
258			#clock-cells = <1>;
259			clock-output-names = "s2mps14_ap", "unused",
260				"s2mps14_bt";
261		};
262
263		regulators {
264			ldo1_reg: LDO1 {
265				regulator-name = "VAP_ALIVE_1.0V";
266				regulator-min-microvolt = <1000000>;
267				regulator-max-microvolt = <1000000>;
268				regulator-always-on;
269
270				regulator-state-mem {
271					regulator-on-in-suspend;
272				};
273			};
274
275			ldo2_reg: LDO2 {
276				regulator-name = "VAP_M1_1.2V";
277				regulator-min-microvolt = <1200000>;
278				regulator-max-microvolt = <1200000>;
279				regulator-always-on;
280
281				regulator-state-mem {
282					regulator-off-in-suspend;
283				};
284			};
285
286			ldo3_reg: LDO3 {
287				regulator-name = "VCC_AP_1.8V";
288				regulator-min-microvolt = <1800000>;
289				regulator-max-microvolt = <1800000>;
290				regulator-always-on;
291
292				regulator-state-mem {
293					regulator-off-in-suspend;
294				};
295			};
296
297			ldo4_reg: LDO4 {
298				regulator-name = "VAP_AVDD_PLL1";
299				regulator-min-microvolt = <1800000>;
300				regulator-max-microvolt = <1800000>;
301				regulator-always-on;
302
303				regulator-state-mem {
304					regulator-off-in-suspend;
305				};
306			};
307
308			ldo5_reg: LDO5 {
309				regulator-name = "VAP_PLL_ISO_1.0V";
310				regulator-min-microvolt = <1000000>;
311				regulator-max-microvolt = <1000000>;
312				regulator-always-on;
313
314				regulator-state-mem {
315					regulator-off-in-suspend;
316				};
317			};
318
319			ldo6_reg: LDO6 {
320				regulator-name = "VAP_VMIPI_1.0V";
321				regulator-min-microvolt = <1000000>;
322				regulator-max-microvolt = <1000000>;
323				regulator-always-on;
324
325				regulator-state-mem {
326					regulator-off-in-suspend;
327				};
328			};
329
330			ldo7_reg: LDO7 {
331				regulator-name = "VAP_AVDD_1.8V";
332				regulator-min-microvolt = <1800000>;
333				regulator-max-microvolt = <1800000>;
334				regulator-always-on;
335
336				regulator-state-mem {
337					regulator-off-in-suspend;
338				};
339			};
340
341			ldo8_reg: LDO8 {
342				regulator-name = "VAP_USB_3.0V";
343				regulator-min-microvolt = <3000000>;
344				regulator-max-microvolt = <3000000>;
345				regulator-always-on;
346
347				regulator-state-mem {
348					regulator-off-in-suspend;
349				};
350			};
351
352			ldo9_reg: LDO9 {
353				regulator-name = "V_LPDDR_1.2V";
354				regulator-min-microvolt = <1200000>;
355				regulator-max-microvolt = <1200000>;
356				regulator-always-on;
357
358				regulator-state-mem {
359					regulator-on-in-suspend;
360				};
361			};
362
363			ldo10_reg: LDO10 {
364				regulator-name = "UNUSED_LDO10";
365				regulator-min-microvolt = <1000000>;
366				regulator-max-microvolt = <1000000>;
367
368				regulator-state-mem {
369					regulator-off-in-suspend;
370				};
371			};
372
373			ldo11_reg: LDO11 {
374				regulator-name = "V_EMMC_1.8V";
375				regulator-min-microvolt = <1800000>;
376				regulator-max-microvolt = <1800000>;
377				samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
378			};
379
380			ldo12_reg: LDO12 {
381				regulator-name = "V_EMMC_2.8V";
382				regulator-min-microvolt = <2800000>;
383				regulator-max-microvolt = <2800000>;
384				samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
385			};
386
387			ldo13_reg: LDO13 {
388				regulator-name = "CAM_AVDD_2.8V";
389				regulator-min-microvolt = <2800000>;
390				regulator-max-microvolt = <2800000>;
391
392				regulator-state-mem {
393					regulator-off-in-suspend;
394				};
395			};
396
397			ldo14_reg: LDO14 {
398				regulator-name = "UNUSED_LDO14";
399				regulator-min-microvolt = <2700000>;
400				regulator-max-microvolt = <2700000>;
401
402				regulator-state-mem {
403					regulator-off-in-suspend;
404				};
405			};
406
407			ldo15_reg: LDO15 {
408				regulator-name = "TSP_AVDD_3.3V";
409				regulator-min-microvolt = <3300000>;
410				regulator-max-microvolt = <3300000>;
411
412				regulator-state-mem {
413					regulator-off-in-suspend;
414				};
415			};
416
417			ldo16_reg: LDO16 {
418				regulator-name = "LCD_VDD_3.3V";
419				regulator-min-microvolt = <3300000>;
420				regulator-max-microvolt = <3300000>;
421
422				regulator-state-mem {
423					regulator-off-in-suspend;
424				};
425			};
426
427			ldo17_reg: LDO17 {
428				regulator-name = "V_IRLED_3.3V";
429				regulator-min-microvolt = <3300000>;
430				regulator-max-microvolt = <3300000>;
431
432				regulator-state-mem {
433					regulator-off-in-suspend;
434				};
435			};
436
437			ldo18_reg: LDO18 {
438				regulator-name = "CAM_AF_2.8V";
439				regulator-min-microvolt = <2800000>;
440				regulator-max-microvolt = <2800000>;
441
442				regulator-state-mem {
443					regulator-off-in-suspend;
444				};
445			};
446
447			ldo19_reg: LDO19 {
448				regulator-name = "TSP_VDD_1.8V";
449				regulator-min-microvolt = <1800000>;
450				regulator-max-microvolt = <1800000>;
451
452				regulator-state-mem {
453					regulator-off-in-suspend;
454				};
455			};
456
457			ldo20_reg: LDO20 {
458				regulator-name = "LCD_VDD_1.8V";
459				regulator-min-microvolt = <1800000>;
460				regulator-max-microvolt = <1800000>;
461
462				regulator-state-mem {
463					regulator-off-in-suspend;
464				};
465			};
466
467			ldo21_reg: LDO21 {
468				regulator-name = "CAM_IO_1.8V";
469				regulator-min-microvolt = <1800000>;
470				regulator-max-microvolt = <1800000>;
471
472				regulator-state-mem {
473					regulator-off-in-suspend;
474				};
475			};
476
477			ldo22_reg: LDO22 {
478				regulator-name = "CAM_DVDD_1.2V";
479				regulator-min-microvolt = <1200000>;
480				regulator-max-microvolt = <1200000>;
481
482				regulator-state-mem {
483					regulator-off-in-suspend;
484				};
485			};
486
487			ldo23_reg: LDO23 {
488				regulator-name = "HRM_VCC_1.8V";
489				regulator-min-microvolt = <1800000>;
490				regulator-max-microvolt = <1800000>;
491				regulator-always-on;
492			};
493
494			ldo24_reg: LDO24 {
495				regulator-name = "HRM_VCC_3.3V";
496				regulator-min-microvolt = <3000000>;
497				regulator-max-microvolt = <3000000>;
498
499				regulator-state-mem {
500					regulator-off-in-suspend;
501				};
502			};
503
504			ldo25_reg: LDO25 {
505				regulator-name = "UNUSED_LDO25";
506				regulator-min-microvolt = <3000000>;
507				regulator-max-microvolt = <3000000>;
508
509				regulator-state-mem {
510					regulator-off-in-suspend;
511				};
512			};
513
514			buck1_reg: BUCK1 {
515				regulator-name = "VAP_MIF_1.0V";
516				regulator-min-microvolt = <800000>;
517				regulator-max-microvolt = <900000>;
518				regulator-always-on;
519
520				regulator-state-mem {
521					regulator-off-in-suspend;
522				};
523			};
524
525			buck2_reg: BUCK2 {
526				regulator-name = "VAP_ARM_1.0V";
527				regulator-min-microvolt = <850000>;
528				regulator-max-microvolt = <1150000>;
529				regulator-always-on;
530
531				regulator-state-mem {
532					regulator-off-in-suspend;
533				};
534			};
535
536			buck3_reg: BUCK3 {
537				regulator-name = "VAP_INT3D_1.0V";
538				regulator-min-microvolt = <850000>;
539				regulator-max-microvolt = <1000000>;
540				regulator-always-on;
541
542				regulator-state-mem {
543					regulator-off-in-suspend;
544				};
545			};
546
547			buck4_reg: BUCK4 {
548				regulator-name = "VCC_SUB_1.95V";
549				regulator-min-microvolt = <1950000>;
550				regulator-max-microvolt = <1950000>;
551				regulator-always-on;
552
553				regulator-state-mem {
554					regulator-on-in-suspend;
555				};
556			};
557
558			buck5_reg: BUCK5 {
559				regulator-name = "VCC_SUB_1.35V";
560				regulator-min-microvolt = <1350000>;
561				regulator-max-microvolt = <1350000>;
562				regulator-always-on;
563
564				regulator-state-mem {
565					regulator-on-in-suspend;
566				};
567			};
568		};
569	};
570};
571
572&i2c_1 {
573	#address-cells = <1>;
574	#size-cells = <0>;
575	samsung,i2c-sda-delay = <100>;
576	samsung,i2c-slave-addr = <0x10>;
577	samsung,i2c-max-bus-freq = <400000>;
578	status = "okay";
579
580	fuelgauge@36 {
581		compatible = "maxim,max77836-battery";
582		interrupt-parent = <&gpx1>;
583		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
584		reg = <0x36>;
585	};
586};
587
588&i2s2 {
589	status = "okay";
590};
591
592&jpeg {
593	status = "okay";
594};
595
596&mshc_0 {
597	#address-cells = <1>;
598	#size-cells = <0>;
 
599	broken-cd;
600	non-removable;
601	cap-mmc-highspeed;
602	desc-num = <4>;
603	mmc-hs200-1_8v;
604	card-detect-delay = <200>;
605	vmmc-supply = <&ldo12_reg>;
606	clock-frequency = <100000000>;
607	max-frequency = <100000000>;
608	samsung,dw-mshc-ciu-div = <1>;
609	samsung,dw-mshc-sdr-timing = <0 1>;
610	samsung,dw-mshc-ddr-timing = <1 2>;
611	pinctrl-names = "default";
612	pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
613	bus-width = <8>;
614	status = "okay";
615};
616
617&serial_0 {
618	assigned-clocks = <&cmu CLK_SCLK_UART0>;
619	assigned-clock-rates = <100000000>;
620	status = "okay";
621};
622
623&serial_1 {
624	status = "okay";
625};
626
627&tmu {
628	vtmu-supply = <&ldo7_reg>;
629	status = "okay";
630};
631
632&rtc {
633	clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
634	clock-names = "rtc", "rtc_src";
635	status = "okay";
636};
637
638&xusbxti {
639	clock-frequency = <24000000>;
640};
641
642&pinctrl_0 {
643	pinctrl-names = "default";
644	pinctrl-0 = <&initial0 &sleep0>;
645
646	initial0: initial-state {
647		PIN_IN(gpa1-4, DOWN, LV1);
648		PIN_IN(gpa1-5, DOWN, LV1);
649
650		PIN_IN(gpc0-0, DOWN, LV1);
651		PIN_IN(gpc0-1, DOWN, LV1);
652		PIN_IN(gpc0-2, DOWN, LV1);
653		PIN_IN(gpc0-3, DOWN, LV1);
654		PIN_IN(gpc0-4, DOWN, LV1);
655
656		PIN_IN(gpd0-0, DOWN, LV1);
657		PIN_IN(gpd0-1, DOWN, LV1);
658	};
659
660	sleep0: sleep-state {
661		PIN_SLP(gpa0-0, INPUT, DOWN);
662		PIN_SLP(gpa0-1, INPUT, DOWN);
663		PIN_SLP(gpa0-2, INPUT, DOWN);
664		PIN_SLP(gpa0-3, INPUT, DOWN);
665		PIN_SLP(gpa0-4, INPUT, DOWN);
666		PIN_SLP(gpa0-5, INPUT, DOWN);
667		PIN_SLP(gpa0-6, INPUT, DOWN);
668		PIN_SLP(gpa0-7, INPUT, DOWN);
669
670		PIN_SLP(gpa1-0, INPUT, DOWN);
671		PIN_SLP(gpa1-1, INPUT, DOWN);
672		PIN_SLP(gpa1-2, INPUT, DOWN);
673		PIN_SLP(gpa1-3, INPUT, DOWN);
674		PIN_SLP(gpa1-4, INPUT, DOWN);
675		PIN_SLP(gpa1-5, INPUT, DOWN);
676
677		PIN_SLP(gpb-0, PREV, NONE);
678		PIN_SLP(gpb-1, PREV, NONE);
679		PIN_SLP(gpb-2, PREV, NONE);
680		PIN_SLP(gpb-3, PREV, NONE);
681		PIN_SLP(gpb-4, INPUT, DOWN);
682		PIN_SLP(gpb-5, INPUT, DOWN);
683		PIN_SLP(gpb-6, INPUT, DOWN);
684		PIN_SLP(gpb-7, INPUT, DOWN);
685
686		PIN_SLP(gpc0-0, INPUT, DOWN);
687		PIN_SLP(gpc0-1, INPUT, DOWN);
688		PIN_SLP(gpc0-2, INPUT, DOWN);
689		PIN_SLP(gpc0-3, INPUT, DOWN);
690		PIN_SLP(gpc0-4, INPUT, DOWN);
691
692		PIN_SLP(gpc1-0, INPUT, DOWN);
693		PIN_SLP(gpc1-1, INPUT, DOWN);
694		PIN_SLP(gpc1-2, INPUT, DOWN);
695		PIN_SLP(gpc1-3, INPUT, DOWN);
696		PIN_SLP(gpc1-4, INPUT, DOWN);
697
698		PIN_SLP(gpd0-0, INPUT, DOWN);
699		PIN_SLP(gpd0-1, INPUT, DOWN);
700		PIN_SLP(gpd0-2, INPUT, NONE);
701		PIN_SLP(gpd0-3, INPUT, NONE);
702
703		PIN_SLP(gpd1-0, INPUT, NONE);
704		PIN_SLP(gpd1-1, INPUT, NONE);
705		PIN_SLP(gpd1-2, INPUT, NONE);
706		PIN_SLP(gpd1-3, INPUT, NONE);
707	};
708};
709
710&pinctrl_1 {
711	pinctrl-names = "default";
712	pinctrl-0 = <&initial1 &sleep1>;
713
714	initial1: initial-state {
715		PIN_IN(gpe0-6, DOWN, LV1);
716		PIN_IN(gpe0-7, DOWN, LV1);
717
718		PIN_IN(gpe1-0, DOWN, LV1);
719		PIN_IN(gpe1-3, DOWN, LV1);
720		PIN_IN(gpe1-4, DOWN, LV1);
721		PIN_IN(gpe1-5, DOWN, LV1);
722		PIN_IN(gpe1-6, DOWN, LV1);
723
724		PIN_IN(gpk2-0, DOWN, LV1);
725		PIN_IN(gpk2-1, DOWN, LV1);
726		PIN_IN(gpk2-2, DOWN, LV1);
727		PIN_IN(gpk2-3, DOWN, LV1);
728		PIN_IN(gpk2-4, DOWN, LV1);
729		PIN_IN(gpk2-5, DOWN, LV1);
730		PIN_IN(gpk2-6, DOWN, LV1);
731
732		PIN_IN(gpm0-0, DOWN, LV1);
733		PIN_IN(gpm0-1, DOWN, LV1);
734		PIN_IN(gpm0-2, DOWN, LV1);
735		PIN_IN(gpm0-3, DOWN, LV1);
736		PIN_IN(gpm0-4, DOWN, LV1);
737		PIN_IN(gpm0-5, DOWN, LV1);
738		PIN_IN(gpm0-6, DOWN, LV1);
739		PIN_IN(gpm0-7, DOWN, LV1);
740
741		PIN_IN(gpm1-0, DOWN, LV1);
742		PIN_IN(gpm1-1, DOWN, LV1);
743		PIN_IN(gpm1-2, DOWN, LV1);
744		PIN_IN(gpm1-3, DOWN, LV1);
745		PIN_IN(gpm1-4, DOWN, LV1);
746		PIN_IN(gpm1-5, DOWN, LV1);
747		PIN_IN(gpm1-6, DOWN, LV1);
748
749		PIN_IN(gpm2-0, DOWN, LV1);
750		PIN_IN(gpm2-1, DOWN, LV1);
751
752		PIN_IN(gpm3-0, DOWN, LV1);
753		PIN_IN(gpm3-1, DOWN, LV1);
754		PIN_IN(gpm3-2, DOWN, LV1);
755		PIN_IN(gpm3-3, DOWN, LV1);
756		PIN_IN(gpm3-4, DOWN, LV1);
757
758		PIN_IN(gpm4-1, DOWN, LV1);
759		PIN_IN(gpm4-2, DOWN, LV1);
760		PIN_IN(gpm4-3, DOWN, LV1);
761		PIN_IN(gpm4-4, DOWN, LV1);
762		PIN_IN(gpm4-5, DOWN, LV1);
763		PIN_IN(gpm4-6, DOWN, LV1);
764		PIN_IN(gpm4-7, DOWN, LV1);
765	};
766
767	sleep1: sleep-state {
768		PIN_SLP(gpe0-0, PREV, NONE);
769		PIN_SLP(gpe0-1, PREV, NONE);
770		PIN_SLP(gpe0-2, INPUT, DOWN);
771		PIN_SLP(gpe0-3, INPUT, UP);
772		PIN_SLP(gpe0-4, INPUT, DOWN);
773		PIN_SLP(gpe0-5, INPUT, DOWN);
774		PIN_SLP(gpe0-6, INPUT, DOWN);
775		PIN_SLP(gpe0-7, INPUT, DOWN);
776
777		PIN_SLP(gpe1-0, INPUT, DOWN);
778		PIN_SLP(gpe1-1, PREV, NONE);
779		PIN_SLP(gpe1-2, INPUT, DOWN);
780		PIN_SLP(gpe1-3, INPUT, DOWN);
781		PIN_SLP(gpe1-4, INPUT, DOWN);
782		PIN_SLP(gpe1-5, INPUT, DOWN);
783		PIN_SLP(gpe1-6, INPUT, DOWN);
784		PIN_SLP(gpe1-7, INPUT, NONE);
785
786		PIN_SLP(gpe2-0, INPUT, NONE);
787		PIN_SLP(gpe2-1, INPUT, NONE);
788		PIN_SLP(gpe2-2, INPUT, NONE);
789
790		PIN_SLP(gpk0-0, INPUT, DOWN);
791		PIN_SLP(gpk0-1, INPUT, DOWN);
792		PIN_SLP(gpk0-2, OUT0, NONE);
793		PIN_SLP(gpk0-3, INPUT, DOWN);
794		PIN_SLP(gpk0-4, INPUT, DOWN);
795		PIN_SLP(gpk0-5, INPUT, DOWN);
796		PIN_SLP(gpk0-6, INPUT, DOWN);
797		PIN_SLP(gpk0-7, INPUT, DOWN);
798
799		PIN_SLP(gpk1-0, INPUT, DOWN);
800		PIN_SLP(gpk1-1, INPUT, DOWN);
801		PIN_SLP(gpk1-2, INPUT, DOWN);
802		PIN_SLP(gpk1-3, INPUT, DOWN);
803		PIN_SLP(gpk1-4, INPUT, DOWN);
804		PIN_SLP(gpk1-5, INPUT, DOWN);
805		PIN_SLP(gpk1-6, INPUT, DOWN);
806
807		PIN_SLP(gpk2-0, INPUT, DOWN);
808		PIN_SLP(gpk2-1, INPUT, DOWN);
809		PIN_SLP(gpk2-2, INPUT, DOWN);
810		PIN_SLP(gpk2-3, INPUT, DOWN);
811		PIN_SLP(gpk2-4, INPUT, DOWN);
812		PIN_SLP(gpk2-5, INPUT, DOWN);
813		PIN_SLP(gpk2-6, INPUT, DOWN);
814
815		PIN_SLP(gpl0-0, INPUT, DOWN);
816		PIN_SLP(gpl0-1, INPUT, DOWN);
817		PIN_SLP(gpl0-2, INPUT, DOWN);
818		PIN_SLP(gpl0-3, INPUT, DOWN);
819
820		PIN_SLP(gpm0-0, INPUT, DOWN);
821		PIN_SLP(gpm0-1, INPUT, DOWN);
822		PIN_SLP(gpm0-2, INPUT, DOWN);
823		PIN_SLP(gpm0-3, INPUT, DOWN);
824		PIN_SLP(gpm0-4, INPUT, DOWN);
825		PIN_SLP(gpm0-5, INPUT, DOWN);
826		PIN_SLP(gpm0-6, INPUT, DOWN);
827		PIN_SLP(gpm0-7, INPUT, DOWN);
828
829		PIN_SLP(gpm1-0, INPUT, DOWN);
830		PIN_SLP(gpm1-1, INPUT, DOWN);
831		PIN_SLP(gpm1-2, INPUT, DOWN);
832		PIN_SLP(gpm1-3, INPUT, DOWN);
833		PIN_SLP(gpm1-4, INPUT, DOWN);
834		PIN_SLP(gpm1-5, INPUT, DOWN);
835		PIN_SLP(gpm1-6, INPUT, DOWN);
836
837		PIN_SLP(gpm2-0, INPUT, DOWN);
838		PIN_SLP(gpm2-1, INPUT, DOWN);
839		PIN_SLP(gpm2-2, INPUT, DOWN);
840		PIN_SLP(gpm2-3, INPUT, DOWN);
841		PIN_SLP(gpm2-4, INPUT, DOWN);
842
843		PIN_SLP(gpm3-0, INPUT, DOWN);
844		PIN_SLP(gpm3-1, INPUT, DOWN);
845		PIN_SLP(gpm3-2, INPUT, DOWN);
846		PIN_SLP(gpm3-3, INPUT, DOWN);
847		PIN_SLP(gpm3-4, INPUT, DOWN);
848		PIN_SLP(gpm3-5, INPUT, DOWN);
849		PIN_SLP(gpm3-6, INPUT, DOWN);
850		PIN_SLP(gpm3-7, INPUT, DOWN);
851
852		PIN_SLP(gpm4-0, INPUT, DOWN);
853		PIN_SLP(gpm4-1, INPUT, DOWN);
854		PIN_SLP(gpm4-2, INPUT, DOWN);
855		PIN_SLP(gpm4-3, INPUT, DOWN);
856		PIN_SLP(gpm4-4, INPUT, DOWN);
857		PIN_SLP(gpm4-5, INPUT, DOWN);
858		PIN_SLP(gpm4-6, INPUT, DOWN);
859		PIN_SLP(gpm4-7, INPUT, DOWN);
860	};
861};
v4.10.11
 
  1/*
  2 * Samsung's Exynos3250 based Rinato board device tree source
  3 *
  4 * Copyright (c) 2014 Samsung Electronics Co., Ltd.
  5 *		http://www.samsung.com
  6 *
  7 * Device tree source file for Samsung's Rinato board which is based on
  8 * Samsung Exynos3250 SoC.
  9 *
 10 * This program is free software; you can redistribute it and/or modify
 11 * it under the terms of the GNU General Public License version 2 as
 12 * published by the Free Software Foundation.
 13 */
 14
 15/dts-v1/;
 16#include "exynos3250.dtsi"
 17#include "exynos4412-ppmu-common.dtsi"
 18#include <dt-bindings/input/input.h>
 19#include <dt-bindings/gpio/gpio.h>
 20#include <dt-bindings/clock/samsung,s2mps11.h>
 21
 22/ {
 23	model = "Samsung Rinato board";
 24	compatible = "samsung,rinato", "samsung,exynos3250", "samsung,exynos3";
 25
 26	aliases {
 27		i2c7 = &i2c_max77836;
 28	};
 29
 30	memory@40000000 {
 31		device_type = "memory";
 32		reg =  <0x40000000 0x1ff00000>;
 33	};
 34
 35	firmware@0205F000 {
 36		compatible = "samsung,secure-firmware";
 37		reg = <0x0205F000 0x1000>;
 38	};
 39
 40	gpio_keys {
 41		compatible = "gpio-keys";
 42
 43		power_key {
 44			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
 45			linux,code = <KEY_POWER>;
 46			label = "power key";
 47			debounce-interval = <10>;
 48			wakeup-source;
 49		};
 50	};
 51
 52	i2c_max77836: i2c-gpio-0 {
 53		compatible = "i2c-gpio";
 54		gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>;
 55		#address-cells = <1>;
 56		#size-cells = <0>;
 57
 58		max77836: subpmic@25 {
 59			compatible = "maxim,max77836";
 60			interrupt-parent = <&gpx1>;
 61			interrupts = <5 0>;
 62			reg = <0x25>;
 63			wakeup-source;
 64
 65			muic: max77836-muic {
 66				compatible = "maxim,max77836-muic";
 67			};
 68
 69			regulators {
 70				compatible = "maxim,max77836-regulator";
 71				safeout_reg: SAFEOUT {
 72					regulator-name = "SAFEOUT";
 73				};
 74
 75				charger_reg: CHARGER {
 76					regulator-name = "CHARGER";
 77					regulator-min-microamp = <45000>;
 78					regulator-max-microamp = <475000>;
 79					regulator-boot-on;
 80				};
 81
 82				motor_reg: LDO1 {
 83					regulator-name = "MOT_2.7V";
 84					regulator-min-microvolt = <1100000>;
 85					regulator-max-microvolt = <2700000>;
 86				};
 87
 88				LDO2 {
 89					regulator-name = "UNUSED_LDO2";
 90					regulator-min-microvolt = <800000>;
 91					regulator-max-microvolt = <3950000>;
 92				};
 93			};
 94
 95			charger {
 96				compatible = "maxim,max77836-charger";
 97
 98				maxim,constant-uvolt = <4350000>;
 99				maxim,fast-charge-uamp = <225000>;
100				maxim,eoc-uamp = <7500>;
101				maxim,ovp-uvolt = <6500000>;
102			};
103		};
104	};
105
106	haptics {
107		compatible = "regulator-haptic";
108		haptic-supply = <&motor_reg>;
109		min-microvolt = <1100000>;
110		max-microvolt = <2700000>;
111	};
112
113	thermal-zones {
114		cpu_thermal: cpu-thermal {
115			cooling-maps {
116				map0 {
117					/* Corresponds to 500MHz */
118					cooling-device = <&cpu0 5 5>;
119				};
120				map1 {
121					/* Corresponds to 200MHz */
122					cooling-device = <&cpu0 8 8>;
123				};
124			};
125		};
126	};
127};
128
129&adc {
130	vdd-supply = <&ldo3_reg>;
131	status = "okay";
132	assigned-clocks = <&cmu CLK_SCLK_TSADC>;
133	assigned-clock-rates = <6000000>;
134
135	thermistor-ap {
136		compatible = "ntc,ncp15wb473";
137		pullup-uv = <1800000>;
138		pullup-ohm = <100000>;
139		pulldown-ohm = <100000>;
140		io-channels = <&adc 0>;
141	};
142
143	thermistor-battery {
144		compatible = "ntc,ncp15wb473";
145		pullup-uv = <1800000>;
146		pullup-ohm = <100000>;
147		pulldown-ohm = <100000>;
148		io-channels = <&adc 1>;
149	};
150};
151
152&bus_dmc {
153	devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
154	vdd-supply = <&buck1_reg>;
155	status = "okay";
156};
157
158&bus_leftbus {
159	devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
160	vdd-supply = <&buck3_reg>;
161	status = "okay";
162};
163
164&bus_rightbus {
165	devfreq = <&bus_leftbus>;
166	status = "okay";
167};
168
169&bus_lcd0 {
170	devfreq = <&bus_leftbus>;
171	status = "okay";
172};
173
174&bus_fsys {
175	devfreq = <&bus_leftbus>;
176	status = "okay";
177};
178
179&bus_mcuisp {
180	devfreq = <&bus_leftbus>;
181	status = "okay";
182};
183
184&bus_isp {
185	devfreq = <&bus_leftbus>;
186	status = "okay";
187};
188
189&bus_peril {
190	devfreq = <&bus_leftbus>;
191	status = "okay";
192};
193
194&bus_mfc {
195	devfreq = <&bus_leftbus>;
196	status = "okay";
197};
198
199&cpu0 {
200	cpu0-supply = <&buck2_reg>;
201};
202
203&exynos_usbphy {
204	status = "okay";
205	vbus-supply = <&safeout_reg>;
206};
207
208&hsotg {
209	vusb_d-supply = <&ldo15_reg>;
210	vusb_a-supply = <&ldo12_reg>;
211	dr_mode = "peripheral";
212	status = "okay";
213};
214
215&dsi_0 {
216	vddcore-supply = <&ldo6_reg>;
217	vddio-supply = <&ldo6_reg>;
 
 
218	samsung,pll-clock-frequency = <24000000>;
219	status = "okay";
220
221	ports {
222		#address-cells = <1>;
223		#size-cells = <0>;
224
225		port@1 {
226			reg = <1>;
227
228			dsi_out: endpoint {
229				remote-endpoint = <&dsi_in>;
230				samsung,burst-clock-frequency = <250000000>;
231				samsung,esc-clock-frequency = <20000000>;
232			};
233		};
234	};
235
236	panel@0 {
237		compatible = "samsung,s6e63j0x03";
238		reg = <0>;
239		vdd3-supply = <&ldo16_reg>;
240		vci-supply = <&ldo20_reg>;
241		reset-gpios = <&gpe0 1 GPIO_ACTIVE_HIGH>;
242		te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
243		power-on-delay= <30>;
244		power-off-delay= <120>;
245		reset-delay = <5>;
246		init-delay = <100>;
247		flip-horizontal;
248		flip-vertical;
249		panel-width-mm = <29>;
250		panel-height-mm = <29>;
251
252		display-timings {
253			timing-0 {
254				clock-frequency = <4600000>;
255				hactive = <320>;
256				vactive = <320>;
257				hfront-porch = <1>;
258				hback-porch = <1>;
259				hsync-len = <1>;
260				vfront-porch = <150>;
261				vback-porch = <1>;
262				vsync-len = <2>;
263			};
264		};
265
266		port {
267			dsi_in: endpoint {
268				remote-endpoint = <&dsi_out>;
269			};
270		};
271	};
272};
273
274&fimd {
275	status = "okay";
276
277	i80-if-timings {
278		cs-setup = <0>;
279		wr-setup = <0>;
280		wr-act = <1>;
281		wr-hold = <0>;
282	};
283};
284
285&i2c_0 {
286	#address-cells = <1>;
287	#size-cells = <0>;
288	samsung,i2c-sda-delay = <100>;
289	samsung,i2c-slave-addr = <0x10>;
290	samsung,i2c-max-bus-freq = <100000>;
291	status = "okay";
292
293	s2mps14_pmic@66 {
294		compatible = "samsung,s2mps14-pmic";
295		interrupt-parent = <&gpx0>;
296		interrupts = <7 0>;
297		reg = <0x66>;
298		wakeup-source;
299
300		s2mps14_osc: clocks {
301			compatible = "samsung,s2mps14-clk";
302			#clock-cells = <1>;
303			clock-output-names = "s2mps14_ap", "unused",
304				"s2mps14_bt";
305		};
306
307		regulators {
308			ldo1_reg: LDO1 {
309				regulator-name = "VAP_ALIVE_1.0V";
310				regulator-min-microvolt = <1000000>;
311				regulator-max-microvolt = <1000000>;
312				regulator-always-on;
313
314				regulator-state-mem {
315					regulator-on-in-suspend;
316				};
317			};
318
319			ldo2_reg: LDO2 {
320				regulator-name = "VAP_M1_1.2V";
321				regulator-min-microvolt = <1200000>;
322				regulator-max-microvolt = <1200000>;
323				regulator-always-on;
324
325				regulator-state-mem {
326					regulator-off-in-suspend;
327				};
328			};
329
330			ldo3_reg: LDO3 {
331				regulator-name = "VCC_AP_1.8V";
332				regulator-min-microvolt = <1800000>;
333				regulator-max-microvolt = <1800000>;
334				regulator-always-on;
335
336				regulator-state-mem {
337					regulator-off-in-suspend;
338				};
339			};
340
341			ldo4_reg: LDO4 {
342				regulator-name = "VAP_AVDD_PLL1";
343				regulator-min-microvolt = <1800000>;
344				regulator-max-microvolt = <1800000>;
345				regulator-always-on;
346
347				regulator-state-mem {
348					regulator-off-in-suspend;
349				};
350			};
351
352			ldo5_reg: LDO5 {
353				regulator-name = "VAP_PLL_ISO_1.0V";
354				regulator-min-microvolt = <1000000>;
355				regulator-max-microvolt = <1000000>;
356				regulator-always-on;
357
358				regulator-state-mem {
359					regulator-off-in-suspend;
360				};
361			};
362
363			ldo6_reg: LDO6 {
364				regulator-name = "VAP_VMIPI_1.0V";
365				regulator-min-microvolt = <1000000>;
366				regulator-max-microvolt = <1000000>;
367				regulator-always-on;
368
369				regulator-state-mem {
370					regulator-off-in-suspend;
371				};
372			};
373
374			ldo7_reg: LDO7 {
375				regulator-name = "VAP_AVDD_1.8V";
376				regulator-min-microvolt = <1800000>;
377				regulator-max-microvolt = <1800000>;
378				regulator-always-on;
379
380				regulator-state-mem {
381					regulator-off-in-suspend;
382				};
383			};
384
385			ldo8_reg: LDO8 {
386				regulator-name = "VAP_USB_3.0V";
387				regulator-min-microvolt = <3000000>;
388				regulator-max-microvolt = <3000000>;
389				regulator-always-on;
390
391				regulator-state-mem {
392					regulator-off-in-suspend;
393				};
394			};
395
396			ldo9_reg: LDO9 {
397				regulator-name = "V_LPDDR_1.2V";
398				regulator-min-microvolt = <1200000>;
399				regulator-max-microvolt = <1200000>;
400				regulator-always-on;
401
402				regulator-state-mem {
403					regulator-on-in-suspend;
404				};
405			};
406
407			ldo10_reg: LDO10 {
408				regulator-name = "UNUSED_LDO10";
409				regulator-min-microvolt = <1000000>;
410				regulator-max-microvolt = <1000000>;
411
412				regulator-state-mem {
413					regulator-off-in-suspend;
414				};
415			};
416
417			ldo11_reg: LDO11 {
418				regulator-name = "V_EMMC_1.8V";
419				regulator-min-microvolt = <1800000>;
420				regulator-max-microvolt = <1800000>;
421				samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
422			};
423
424			ldo12_reg: LDO12 {
425				regulator-name = "V_EMMC_2.8V";
426				regulator-min-microvolt = <2800000>;
427				regulator-max-microvolt = <2800000>;
428				samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
429			};
430
431			ldo13_reg: LDO13 {
432				regulator-name = "CAM_AVDD_2.8V";
433				regulator-min-microvolt = <2800000>;
434				regulator-max-microvolt = <2800000>;
435
436				regulator-state-mem {
437					regulator-off-in-suspend;
438				};
439			};
440
441			ldo14_reg: LDO14 {
442				regulator-name = "UNUSED_LDO14";
443				regulator-min-microvolt = <2700000>;
444				regulator-max-microvolt = <2700000>;
445
446				regulator-state-mem {
447					regulator-off-in-suspend;
448				};
449			};
450
451			ldo15_reg: LDO15 {
452				regulator-name = "TSP_AVDD_3.3V";
453				regulator-min-microvolt = <3300000>;
454				regulator-max-microvolt = <3300000>;
455
456				regulator-state-mem {
457					regulator-off-in-suspend;
458				};
459			};
460
461			ldo16_reg: LDO16 {
462				regulator-name = "LCD_VDD_3.3V";
463				regulator-min-microvolt = <3300000>;
464				regulator-max-microvolt = <3300000>;
465
466				regulator-state-mem {
467					regulator-off-in-suspend;
468				};
469			};
470
471			ldo17_reg: LDO17 {
472				regulator-name = "V_IRLED_3.3V";
473				regulator-min-microvolt = <3300000>;
474				regulator-max-microvolt = <3300000>;
475
476				regulator-state-mem {
477					regulator-off-in-suspend;
478				};
479			};
480
481			ldo18_reg: LDO18 {
482				regulator-name = "CAM_AF_2.8V";
483				regulator-min-microvolt = <2800000>;
484				regulator-max-microvolt = <2800000>;
485
486				regulator-state-mem {
487					regulator-off-in-suspend;
488				};
489			};
490
491			ldo19_reg: LDO19 {
492				regulator-name = "TSP_VDD_1.8V";
493				regulator-min-microvolt = <1800000>;
494				regulator-max-microvolt = <1800000>;
495
496				regulator-state-mem {
497					regulator-off-in-suspend;
498				};
499			};
500
501			ldo20_reg: LDO20 {
502				regulator-name = "LCD_VDD_1.8V";
503				regulator-min-microvolt = <1800000>;
504				regulator-max-microvolt = <1800000>;
505
506				regulator-state-mem {
507					regulator-off-in-suspend;
508				};
509			};
510
511			ldo21_reg: LDO21 {
512				regulator-name = "CAM_IO_1.8V";
513				regulator-min-microvolt = <1800000>;
514				regulator-max-microvolt = <1800000>;
515
516				regulator-state-mem {
517					regulator-off-in-suspend;
518				};
519			};
520
521			ldo22_reg: LDO22 {
522				regulator-name = "CAM_DVDD_1.2V";
523				regulator-min-microvolt = <1200000>;
524				regulator-max-microvolt = <1200000>;
525
526				regulator-state-mem {
527					regulator-off-in-suspend;
528				};
529			};
530
531			ldo23_reg: LDO23 {
532				regulator-name = "HRM_VCC_1.8V";
533				regulator-min-microvolt = <1800000>;
534				regulator-max-microvolt = <1800000>;
535				regulator-always-on;
536			};
537
538			ldo24_reg: LDO24 {
539				regulator-name = "HRM_VCC_3.3V";
540				regulator-min-microvolt = <3000000>;
541				regulator-max-microvolt = <3000000>;
542
543				regulator-state-mem {
544					regulator-off-in-suspend;
545				};
546			};
547
548			ldo25_reg: LDO25 {
549				regulator-name = "UNUSED_LDO25";
550				regulator-min-microvolt = <3000000>;
551				regulator-max-microvolt = <3000000>;
552
553				regulator-state-mem {
554					regulator-off-in-suspend;
555				};
556			};
557
558			buck1_reg: BUCK1 {
559				regulator-name = "VAP_MIF_1.0V";
560				regulator-min-microvolt = <800000>;
561				regulator-max-microvolt = <900000>;
562				regulator-always-on;
563
564				regulator-state-mem {
565					regulator-off-in-suspend;
566				};
567			};
568
569			buck2_reg: BUCK2 {
570				regulator-name = "VAP_ARM_1.0V";
571				regulator-min-microvolt = <850000>;
572				regulator-max-microvolt = <1150000>;
573				regulator-always-on;
574
575				regulator-state-mem {
576					regulator-off-in-suspend;
577				};
578			};
579
580			buck3_reg: BUCK3 {
581				regulator-name = "VAP_INT3D_1.0V";
582				regulator-min-microvolt = <850000>;
583				regulator-max-microvolt = <1000000>;
584				regulator-always-on;
585
586				regulator-state-mem {
587					regulator-off-in-suspend;
588				};
589			};
590
591			buck4_reg: BUCK4 {
592				regulator-name = "VCC_SUB_1.95V";
593				regulator-min-microvolt = <1950000>;
594				regulator-max-microvolt = <1950000>;
595				regulator-always-on;
596
597				regulator-state-mem {
598					regulator-on-in-suspend;
599				};
600			};
601
602			buck5_reg: BUCK5 {
603				regulator-name = "VCC_SUB_1.35V";
604				regulator-min-microvolt = <1350000>;
605				regulator-max-microvolt = <1350000>;
606				regulator-always-on;
607
608				regulator-state-mem {
609					regulator-on-in-suspend;
610				};
611			};
612		};
613	};
614};
615
616&i2c_1 {
617	#address-cells = <1>;
618	#size-cells = <0>;
619	samsung,i2c-sda-delay = <100>;
620	samsung,i2c-slave-addr = <0x10>;
621	samsung,i2c-max-bus-freq = <400000>;
622	status = "okay";
623
624	fuelgauge@36 {
625		compatible = "maxim,max77836-battery";
626		interrupt-parent = <&gpx1>;
627		interrupts = <2 8>;
628		reg = <0x36>;
629	};
630};
631
632&i2s2 {
633	status = "okay";
634};
635
636&jpeg {
637	status = "okay";
638};
639
640&mshc_0 {
641	#address-cells = <1>;
642	#size-cells = <0>;
643	num-slots = <1>;
644	broken-cd;
645	non-removable;
646	cap-mmc-highspeed;
647	desc-num = <4>;
648	mmc-hs200-1_8v;
649	card-detect-delay = <200>;
650	vmmc-supply = <&ldo12_reg>;
651	clock-frequency = <100000000>;
652	max-frequency = <100000000>;
653	samsung,dw-mshc-ciu-div = <1>;
654	samsung,dw-mshc-sdr-timing = <0 1>;
655	samsung,dw-mshc-ddr-timing = <1 2>;
656	pinctrl-names = "default";
657	pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
658	bus-width = <8>;
659	status = "okay";
660};
661
662&serial_0 {
663	assigned-clocks = <&cmu CLK_SCLK_UART0>;
664	assigned-clock-rates = <100000000>;
665	status = "okay";
666};
667
668&serial_1 {
669	status = "okay";
670};
671
672&tmu {
673	vtmu-supply = <&ldo7_reg>;
674	status = "okay";
675};
676
677&rtc {
678	clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
679	clock-names = "rtc", "rtc_src";
680	status = "okay";
681};
682
683&xusbxti {
684	clock-frequency = <24000000>;
685};
686
687&pinctrl_0 {
688	pinctrl-names = "default";
689	pinctrl-0 = <&initial0 &sleep0>;
690
691	initial0: initial-state {
692		PIN_IN(gpa1-4, DOWN, LV1);
693		PIN_IN(gpa1-5, DOWN, LV1);
694
695		PIN_IN(gpc0-0, DOWN, LV1);
696		PIN_IN(gpc0-1, DOWN, LV1);
697		PIN_IN(gpc0-2, DOWN, LV1);
698		PIN_IN(gpc0-3, DOWN, LV1);
699		PIN_IN(gpc0-4, DOWN, LV1);
700
701		PIN_IN(gpd0-0, DOWN, LV1);
702		PIN_IN(gpd0-1, DOWN, LV1);
703	};
704
705	sleep0: sleep-state {
706		PIN_SLP(gpa0-0, INPUT, DOWN);
707		PIN_SLP(gpa0-1, INPUT, DOWN);
708		PIN_SLP(gpa0-2, INPUT, DOWN);
709		PIN_SLP(gpa0-3, INPUT, DOWN);
710		PIN_SLP(gpa0-4, INPUT, DOWN);
711		PIN_SLP(gpa0-5, INPUT, DOWN);
712		PIN_SLP(gpa0-6, INPUT, DOWN);
713		PIN_SLP(gpa0-7, INPUT, DOWN);
714
715		PIN_SLP(gpa1-0, INPUT, DOWN);
716		PIN_SLP(gpa1-1, INPUT, DOWN);
717		PIN_SLP(gpa1-2, INPUT, DOWN);
718		PIN_SLP(gpa1-3, INPUT, DOWN);
719		PIN_SLP(gpa1-4, INPUT, DOWN);
720		PIN_SLP(gpa1-5, INPUT, DOWN);
721
722		PIN_SLP(gpb-0, PREV, NONE);
723		PIN_SLP(gpb-1, PREV, NONE);
724		PIN_SLP(gpb-2, PREV, NONE);
725		PIN_SLP(gpb-3, PREV, NONE);
726		PIN_SLP(gpb-4, INPUT, DOWN);
727		PIN_SLP(gpb-5, INPUT, DOWN);
728		PIN_SLP(gpb-6, INPUT, DOWN);
729		PIN_SLP(gpb-7, INPUT, DOWN);
730
731		PIN_SLP(gpc0-0, INPUT, DOWN);
732		PIN_SLP(gpc0-1, INPUT, DOWN);
733		PIN_SLP(gpc0-2, INPUT, DOWN);
734		PIN_SLP(gpc0-3, INPUT, DOWN);
735		PIN_SLP(gpc0-4, INPUT, DOWN);
736
737		PIN_SLP(gpc1-0, INPUT, DOWN);
738		PIN_SLP(gpc1-1, INPUT, DOWN);
739		PIN_SLP(gpc1-2, INPUT, DOWN);
740		PIN_SLP(gpc1-3, INPUT, DOWN);
741		PIN_SLP(gpc1-4, INPUT, DOWN);
742
743		PIN_SLP(gpd0-0, INPUT, DOWN);
744		PIN_SLP(gpd0-1, INPUT, DOWN);
745		PIN_SLP(gpd0-2, INPUT, NONE);
746		PIN_SLP(gpd0-3, INPUT, NONE);
747
748		PIN_SLP(gpd1-0, INPUT, NONE);
749		PIN_SLP(gpd1-1, INPUT, NONE);
750		PIN_SLP(gpd1-2, INPUT, NONE);
751		PIN_SLP(gpd1-3, INPUT, NONE);
752	};
753};
754
755&pinctrl_1 {
756	pinctrl-names = "default";
757	pinctrl-0 = <&initial1 &sleep1>;
758
759	initial1: initial-state {
760		PIN_IN(gpe0-6, DOWN, LV1);
761		PIN_IN(gpe0-7, DOWN, LV1);
762
763		PIN_IN(gpe1-0, DOWN, LV1);
764		PIN_IN(gpe1-3, DOWN, LV1);
765		PIN_IN(gpe1-4, DOWN, LV1);
766		PIN_IN(gpe1-5, DOWN, LV1);
767		PIN_IN(gpe1-6, DOWN, LV1);
768
769		PIN_IN(gpk2-0, DOWN, LV1);
770		PIN_IN(gpk2-1, DOWN, LV1);
771		PIN_IN(gpk2-2, DOWN, LV1);
772		PIN_IN(gpk2-3, DOWN, LV1);
773		PIN_IN(gpk2-4, DOWN, LV1);
774		PIN_IN(gpk2-5, DOWN, LV1);
775		PIN_IN(gpk2-6, DOWN, LV1);
776
777		PIN_IN(gpm0-0, DOWN, LV1);
778		PIN_IN(gpm0-1, DOWN, LV1);
779		PIN_IN(gpm0-2, DOWN, LV1);
780		PIN_IN(gpm0-3, DOWN, LV1);
781		PIN_IN(gpm0-4, DOWN, LV1);
782		PIN_IN(gpm0-5, DOWN, LV1);
783		PIN_IN(gpm0-6, DOWN, LV1);
784		PIN_IN(gpm0-7, DOWN, LV1);
785
786		PIN_IN(gpm1-0, DOWN, LV1);
787		PIN_IN(gpm1-1, DOWN, LV1);
788		PIN_IN(gpm1-2, DOWN, LV1);
789		PIN_IN(gpm1-3, DOWN, LV1);
790		PIN_IN(gpm1-4, DOWN, LV1);
791		PIN_IN(gpm1-5, DOWN, LV1);
792		PIN_IN(gpm1-6, DOWN, LV1);
793
794		PIN_IN(gpm2-0, DOWN, LV1);
795		PIN_IN(gpm2-1, DOWN, LV1);
796
797		PIN_IN(gpm3-0, DOWN, LV1);
798		PIN_IN(gpm3-1, DOWN, LV1);
799		PIN_IN(gpm3-2, DOWN, LV1);
800		PIN_IN(gpm3-3, DOWN, LV1);
801		PIN_IN(gpm3-4, DOWN, LV1);
802
803		PIN_IN(gpm4-1, DOWN, LV1);
804		PIN_IN(gpm4-2, DOWN, LV1);
805		PIN_IN(gpm4-3, DOWN, LV1);
806		PIN_IN(gpm4-4, DOWN, LV1);
807		PIN_IN(gpm4-5, DOWN, LV1);
808		PIN_IN(gpm4-6, DOWN, LV1);
809		PIN_IN(gpm4-7, DOWN, LV1);
810	};
811
812	sleep1: sleep-state {
813		PIN_SLP(gpe0-0, PREV, NONE);
814		PIN_SLP(gpe0-1, PREV, NONE);
815		PIN_SLP(gpe0-2, INPUT, DOWN);
816		PIN_SLP(gpe0-3, INPUT, UP);
817		PIN_SLP(gpe0-4, INPUT, DOWN);
818		PIN_SLP(gpe0-5, INPUT, DOWN);
819		PIN_SLP(gpe0-6, INPUT, DOWN);
820		PIN_SLP(gpe0-7, INPUT, DOWN);
821
822		PIN_SLP(gpe1-0, INPUT, DOWN);
823		PIN_SLP(gpe1-1, PREV, NONE);
824		PIN_SLP(gpe1-2, INPUT, DOWN);
825		PIN_SLP(gpe1-3, INPUT, DOWN);
826		PIN_SLP(gpe1-4, INPUT, DOWN);
827		PIN_SLP(gpe1-5, INPUT, DOWN);
828		PIN_SLP(gpe1-6, INPUT, DOWN);
829		PIN_SLP(gpe1-7, INPUT, NONE);
830
831		PIN_SLP(gpe2-0, INPUT, NONE);
832		PIN_SLP(gpe2-1, INPUT, NONE);
833		PIN_SLP(gpe2-2, INPUT, NONE);
834
835		PIN_SLP(gpk0-0, INPUT, DOWN);
836		PIN_SLP(gpk0-1, INPUT, DOWN);
837		PIN_SLP(gpk0-2, OUT0, NONE);
838		PIN_SLP(gpk0-3, INPUT, DOWN);
839		PIN_SLP(gpk0-4, INPUT, DOWN);
840		PIN_SLP(gpk0-5, INPUT, DOWN);
841		PIN_SLP(gpk0-6, INPUT, DOWN);
842		PIN_SLP(gpk0-7, INPUT, DOWN);
843
844		PIN_SLP(gpk1-0, INPUT, DOWN);
845		PIN_SLP(gpk1-1, INPUT, DOWN);
846		PIN_SLP(gpk1-2, INPUT, DOWN);
847		PIN_SLP(gpk1-3, INPUT, DOWN);
848		PIN_SLP(gpk1-4, INPUT, DOWN);
849		PIN_SLP(gpk1-5, INPUT, DOWN);
850		PIN_SLP(gpk1-6, INPUT, DOWN);
851
852		PIN_SLP(gpk2-0, INPUT, DOWN);
853		PIN_SLP(gpk2-1, INPUT, DOWN);
854		PIN_SLP(gpk2-2, INPUT, DOWN);
855		PIN_SLP(gpk2-3, INPUT, DOWN);
856		PIN_SLP(gpk2-4, INPUT, DOWN);
857		PIN_SLP(gpk2-5, INPUT, DOWN);
858		PIN_SLP(gpk2-6, INPUT, DOWN);
859
860		PIN_SLP(gpl0-0, INPUT, DOWN);
861		PIN_SLP(gpl0-1, INPUT, DOWN);
862		PIN_SLP(gpl0-2, INPUT, DOWN);
863		PIN_SLP(gpl0-3, INPUT, DOWN);
864
865		PIN_SLP(gpm0-0, INPUT, DOWN);
866		PIN_SLP(gpm0-1, INPUT, DOWN);
867		PIN_SLP(gpm0-2, INPUT, DOWN);
868		PIN_SLP(gpm0-3, INPUT, DOWN);
869		PIN_SLP(gpm0-4, INPUT, DOWN);
870		PIN_SLP(gpm0-5, INPUT, DOWN);
871		PIN_SLP(gpm0-6, INPUT, DOWN);
872		PIN_SLP(gpm0-7, INPUT, DOWN);
873
874		PIN_SLP(gpm1-0, INPUT, DOWN);
875		PIN_SLP(gpm1-1, INPUT, DOWN);
876		PIN_SLP(gpm1-2, INPUT, DOWN);
877		PIN_SLP(gpm1-3, INPUT, DOWN);
878		PIN_SLP(gpm1-4, INPUT, DOWN);
879		PIN_SLP(gpm1-5, INPUT, DOWN);
880		PIN_SLP(gpm1-6, INPUT, DOWN);
881
882		PIN_SLP(gpm2-0, INPUT, DOWN);
883		PIN_SLP(gpm2-1, INPUT, DOWN);
884		PIN_SLP(gpm2-2, INPUT, DOWN);
885		PIN_SLP(gpm2-3, INPUT, DOWN);
886		PIN_SLP(gpm2-4, INPUT, DOWN);
887
888		PIN_SLP(gpm3-0, INPUT, DOWN);
889		PIN_SLP(gpm3-1, INPUT, DOWN);
890		PIN_SLP(gpm3-2, INPUT, DOWN);
891		PIN_SLP(gpm3-3, INPUT, DOWN);
892		PIN_SLP(gpm3-4, INPUT, DOWN);
893		PIN_SLP(gpm3-5, INPUT, DOWN);
894		PIN_SLP(gpm3-6, INPUT, DOWN);
895		PIN_SLP(gpm3-7, INPUT, DOWN);
896
897		PIN_SLP(gpm4-0, INPUT, DOWN);
898		PIN_SLP(gpm4-1, INPUT, DOWN);
899		PIN_SLP(gpm4-2, INPUT, DOWN);
900		PIN_SLP(gpm4-3, INPUT, DOWN);
901		PIN_SLP(gpm4-4, INPUT, DOWN);
902		PIN_SLP(gpm4-5, INPUT, DOWN);
903		PIN_SLP(gpm4-6, INPUT, DOWN);
904		PIN_SLP(gpm4-7, INPUT, DOWN);
905	};
906};