Loading...
1#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
2
3#include <linux/kernel.h>
4#include <linux/sched.h>
5#include <linux/sched/clock.h>
6#include <linux/init.h>
7#include <linux/export.h>
8#include <linux/timer.h>
9#include <linux/acpi_pmtmr.h>
10#include <linux/cpufreq.h>
11#include <linux/delay.h>
12#include <linux/clocksource.h>
13#include <linux/percpu.h>
14#include <linux/timex.h>
15#include <linux/static_key.h>
16
17#include <asm/hpet.h>
18#include <asm/timer.h>
19#include <asm/vgtod.h>
20#include <asm/time.h>
21#include <asm/delay.h>
22#include <asm/hypervisor.h>
23#include <asm/nmi.h>
24#include <asm/x86_init.h>
25#include <asm/geode.h>
26#include <asm/apic.h>
27#include <asm/intel-family.h>
28#include <asm/i8259.h>
29
30unsigned int __read_mostly cpu_khz; /* TSC clocks / usec, not used here */
31EXPORT_SYMBOL(cpu_khz);
32
33unsigned int __read_mostly tsc_khz;
34EXPORT_SYMBOL(tsc_khz);
35
36/*
37 * TSC can be unstable due to cpufreq or due to unsynced TSCs
38 */
39static int __read_mostly tsc_unstable;
40
41/* native_sched_clock() is called before tsc_init(), so
42 we must start with the TSC soft disabled to prevent
43 erroneous rdtsc usage on !boot_cpu_has(X86_FEATURE_TSC) processors */
44static int __read_mostly tsc_disabled = -1;
45
46static DEFINE_STATIC_KEY_FALSE(__use_tsc);
47
48int tsc_clocksource_reliable;
49
50static u32 art_to_tsc_numerator;
51static u32 art_to_tsc_denominator;
52static u64 art_to_tsc_offset;
53struct clocksource *art_related_clocksource;
54
55struct cyc2ns {
56 struct cyc2ns_data data[2]; /* 0 + 2*16 = 32 */
57 seqcount_t seq; /* 32 + 4 = 36 */
58
59}; /* fits one cacheline */
60
61static DEFINE_PER_CPU_ALIGNED(struct cyc2ns, cyc2ns);
62
63void cyc2ns_read_begin(struct cyc2ns_data *data)
64{
65 int seq, idx;
66
67 preempt_disable_notrace();
68
69 do {
70 seq = this_cpu_read(cyc2ns.seq.sequence);
71 idx = seq & 1;
72
73 data->cyc2ns_offset = this_cpu_read(cyc2ns.data[idx].cyc2ns_offset);
74 data->cyc2ns_mul = this_cpu_read(cyc2ns.data[idx].cyc2ns_mul);
75 data->cyc2ns_shift = this_cpu_read(cyc2ns.data[idx].cyc2ns_shift);
76
77 } while (unlikely(seq != this_cpu_read(cyc2ns.seq.sequence)));
78}
79
80void cyc2ns_read_end(void)
81{
82 preempt_enable_notrace();
83}
84
85/*
86 * Accelerators for sched_clock()
87 * convert from cycles(64bits) => nanoseconds (64bits)
88 * basic equation:
89 * ns = cycles / (freq / ns_per_sec)
90 * ns = cycles * (ns_per_sec / freq)
91 * ns = cycles * (10^9 / (cpu_khz * 10^3))
92 * ns = cycles * (10^6 / cpu_khz)
93 *
94 * Then we use scaling math (suggested by george@mvista.com) to get:
95 * ns = cycles * (10^6 * SC / cpu_khz) / SC
96 * ns = cycles * cyc2ns_scale / SC
97 *
98 * And since SC is a constant power of two, we can convert the div
99 * into a shift. The larger SC is, the more accurate the conversion, but
100 * cyc2ns_scale needs to be a 32-bit value so that 32-bit multiplication
101 * (64-bit result) can be used.
102 *
103 * We can use khz divisor instead of mhz to keep a better precision.
104 * (mathieu.desnoyers@polymtl.ca)
105 *
106 * -johnstul@us.ibm.com "math is hard, lets go shopping!"
107 */
108
109static void cyc2ns_data_init(struct cyc2ns_data *data)
110{
111 data->cyc2ns_mul = 0;
112 data->cyc2ns_shift = 0;
113 data->cyc2ns_offset = 0;
114}
115
116static void __init cyc2ns_init(int cpu)
117{
118 struct cyc2ns *c2n = &per_cpu(cyc2ns, cpu);
119
120 cyc2ns_data_init(&c2n->data[0]);
121 cyc2ns_data_init(&c2n->data[1]);
122
123 seqcount_init(&c2n->seq);
124}
125
126static inline unsigned long long cycles_2_ns(unsigned long long cyc)
127{
128 struct cyc2ns_data data;
129 unsigned long long ns;
130
131 cyc2ns_read_begin(&data);
132
133 ns = data.cyc2ns_offset;
134 ns += mul_u64_u32_shr(cyc, data.cyc2ns_mul, data.cyc2ns_shift);
135
136 cyc2ns_read_end();
137
138 return ns;
139}
140
141static void set_cyc2ns_scale(unsigned long khz, int cpu, unsigned long long tsc_now)
142{
143 unsigned long long ns_now;
144 struct cyc2ns_data data;
145 struct cyc2ns *c2n;
146 unsigned long flags;
147
148 local_irq_save(flags);
149 sched_clock_idle_sleep_event();
150
151 if (!khz)
152 goto done;
153
154 ns_now = cycles_2_ns(tsc_now);
155
156 /*
157 * Compute a new multiplier as per the above comment and ensure our
158 * time function is continuous; see the comment near struct
159 * cyc2ns_data.
160 */
161 clocks_calc_mult_shift(&data.cyc2ns_mul, &data.cyc2ns_shift, khz,
162 NSEC_PER_MSEC, 0);
163
164 /*
165 * cyc2ns_shift is exported via arch_perf_update_userpage() where it is
166 * not expected to be greater than 31 due to the original published
167 * conversion algorithm shifting a 32-bit value (now specifies a 64-bit
168 * value) - refer perf_event_mmap_page documentation in perf_event.h.
169 */
170 if (data.cyc2ns_shift == 32) {
171 data.cyc2ns_shift = 31;
172 data.cyc2ns_mul >>= 1;
173 }
174
175 data.cyc2ns_offset = ns_now -
176 mul_u64_u32_shr(tsc_now, data.cyc2ns_mul, data.cyc2ns_shift);
177
178 c2n = per_cpu_ptr(&cyc2ns, cpu);
179
180 raw_write_seqcount_latch(&c2n->seq);
181 c2n->data[0] = data;
182 raw_write_seqcount_latch(&c2n->seq);
183 c2n->data[1] = data;
184
185done:
186 sched_clock_idle_wakeup_event();
187 local_irq_restore(flags);
188}
189
190/*
191 * Scheduler clock - returns current time in nanosec units.
192 */
193u64 native_sched_clock(void)
194{
195 if (static_branch_likely(&__use_tsc)) {
196 u64 tsc_now = rdtsc();
197
198 /* return the value in ns */
199 return cycles_2_ns(tsc_now);
200 }
201
202 /*
203 * Fall back to jiffies if there's no TSC available:
204 * ( But note that we still use it if the TSC is marked
205 * unstable. We do this because unlike Time Of Day,
206 * the scheduler clock tolerates small errors and it's
207 * very important for it to be as fast as the platform
208 * can achieve it. )
209 */
210
211 /* No locking but a rare wrong value is not a big deal: */
212 return (jiffies_64 - INITIAL_JIFFIES) * (1000000000 / HZ);
213}
214
215/*
216 * Generate a sched_clock if you already have a TSC value.
217 */
218u64 native_sched_clock_from_tsc(u64 tsc)
219{
220 return cycles_2_ns(tsc);
221}
222
223/* We need to define a real function for sched_clock, to override the
224 weak default version */
225#ifdef CONFIG_PARAVIRT
226unsigned long long sched_clock(void)
227{
228 return paravirt_sched_clock();
229}
230
231bool using_native_sched_clock(void)
232{
233 return pv_time_ops.sched_clock == native_sched_clock;
234}
235#else
236unsigned long long
237sched_clock(void) __attribute__((alias("native_sched_clock")));
238
239bool using_native_sched_clock(void) { return true; }
240#endif
241
242int check_tsc_unstable(void)
243{
244 return tsc_unstable;
245}
246EXPORT_SYMBOL_GPL(check_tsc_unstable);
247
248#ifdef CONFIG_X86_TSC
249int __init notsc_setup(char *str)
250{
251 pr_warn("Kernel compiled with CONFIG_X86_TSC, cannot disable TSC completely\n");
252 tsc_disabled = 1;
253 return 1;
254}
255#else
256/*
257 * disable flag for tsc. Takes effect by clearing the TSC cpu flag
258 * in cpu/common.c
259 */
260int __init notsc_setup(char *str)
261{
262 setup_clear_cpu_cap(X86_FEATURE_TSC);
263 return 1;
264}
265#endif
266
267__setup("notsc", notsc_setup);
268
269static int no_sched_irq_time;
270
271static int __init tsc_setup(char *str)
272{
273 if (!strcmp(str, "reliable"))
274 tsc_clocksource_reliable = 1;
275 if (!strncmp(str, "noirqtime", 9))
276 no_sched_irq_time = 1;
277 if (!strcmp(str, "unstable"))
278 mark_tsc_unstable("boot parameter");
279 return 1;
280}
281
282__setup("tsc=", tsc_setup);
283
284#define MAX_RETRIES 5
285#define SMI_TRESHOLD 50000
286
287/*
288 * Read TSC and the reference counters. Take care of SMI disturbance
289 */
290static u64 tsc_read_refs(u64 *p, int hpet)
291{
292 u64 t1, t2;
293 int i;
294
295 for (i = 0; i < MAX_RETRIES; i++) {
296 t1 = get_cycles();
297 if (hpet)
298 *p = hpet_readl(HPET_COUNTER) & 0xFFFFFFFF;
299 else
300 *p = acpi_pm_read_early();
301 t2 = get_cycles();
302 if ((t2 - t1) < SMI_TRESHOLD)
303 return t2;
304 }
305 return ULLONG_MAX;
306}
307
308/*
309 * Calculate the TSC frequency from HPET reference
310 */
311static unsigned long calc_hpet_ref(u64 deltatsc, u64 hpet1, u64 hpet2)
312{
313 u64 tmp;
314
315 if (hpet2 < hpet1)
316 hpet2 += 0x100000000ULL;
317 hpet2 -= hpet1;
318 tmp = ((u64)hpet2 * hpet_readl(HPET_PERIOD));
319 do_div(tmp, 1000000);
320 deltatsc = div64_u64(deltatsc, tmp);
321
322 return (unsigned long) deltatsc;
323}
324
325/*
326 * Calculate the TSC frequency from PMTimer reference
327 */
328static unsigned long calc_pmtimer_ref(u64 deltatsc, u64 pm1, u64 pm2)
329{
330 u64 tmp;
331
332 if (!pm1 && !pm2)
333 return ULONG_MAX;
334
335 if (pm2 < pm1)
336 pm2 += (u64)ACPI_PM_OVRRUN;
337 pm2 -= pm1;
338 tmp = pm2 * 1000000000LL;
339 do_div(tmp, PMTMR_TICKS_PER_SEC);
340 do_div(deltatsc, tmp);
341
342 return (unsigned long) deltatsc;
343}
344
345#define CAL_MS 10
346#define CAL_LATCH (PIT_TICK_RATE / (1000 / CAL_MS))
347#define CAL_PIT_LOOPS 1000
348
349#define CAL2_MS 50
350#define CAL2_LATCH (PIT_TICK_RATE / (1000 / CAL2_MS))
351#define CAL2_PIT_LOOPS 5000
352
353
354/*
355 * Try to calibrate the TSC against the Programmable
356 * Interrupt Timer and return the frequency of the TSC
357 * in kHz.
358 *
359 * Return ULONG_MAX on failure to calibrate.
360 */
361static unsigned long pit_calibrate_tsc(u32 latch, unsigned long ms, int loopmin)
362{
363 u64 tsc, t1, t2, delta;
364 unsigned long tscmin, tscmax;
365 int pitcnt;
366
367 if (!has_legacy_pic()) {
368 /*
369 * Relies on tsc_early_delay_calibrate() to have given us semi
370 * usable udelay(), wait for the same 50ms we would have with
371 * the PIT loop below.
372 */
373 udelay(10 * USEC_PER_MSEC);
374 udelay(10 * USEC_PER_MSEC);
375 udelay(10 * USEC_PER_MSEC);
376 udelay(10 * USEC_PER_MSEC);
377 udelay(10 * USEC_PER_MSEC);
378 return ULONG_MAX;
379 }
380
381 /* Set the Gate high, disable speaker */
382 outb((inb(0x61) & ~0x02) | 0x01, 0x61);
383
384 /*
385 * Setup CTC channel 2* for mode 0, (interrupt on terminal
386 * count mode), binary count. Set the latch register to 50ms
387 * (LSB then MSB) to begin countdown.
388 */
389 outb(0xb0, 0x43);
390 outb(latch & 0xff, 0x42);
391 outb(latch >> 8, 0x42);
392
393 tsc = t1 = t2 = get_cycles();
394
395 pitcnt = 0;
396 tscmax = 0;
397 tscmin = ULONG_MAX;
398 while ((inb(0x61) & 0x20) == 0) {
399 t2 = get_cycles();
400 delta = t2 - tsc;
401 tsc = t2;
402 if ((unsigned long) delta < tscmin)
403 tscmin = (unsigned int) delta;
404 if ((unsigned long) delta > tscmax)
405 tscmax = (unsigned int) delta;
406 pitcnt++;
407 }
408
409 /*
410 * Sanity checks:
411 *
412 * If we were not able to read the PIT more than loopmin
413 * times, then we have been hit by a massive SMI
414 *
415 * If the maximum is 10 times larger than the minimum,
416 * then we got hit by an SMI as well.
417 */
418 if (pitcnt < loopmin || tscmax > 10 * tscmin)
419 return ULONG_MAX;
420
421 /* Calculate the PIT value */
422 delta = t2 - t1;
423 do_div(delta, ms);
424 return delta;
425}
426
427/*
428 * This reads the current MSB of the PIT counter, and
429 * checks if we are running on sufficiently fast and
430 * non-virtualized hardware.
431 *
432 * Our expectations are:
433 *
434 * - the PIT is running at roughly 1.19MHz
435 *
436 * - each IO is going to take about 1us on real hardware,
437 * but we allow it to be much faster (by a factor of 10) or
438 * _slightly_ slower (ie we allow up to a 2us read+counter
439 * update - anything else implies a unacceptably slow CPU
440 * or PIT for the fast calibration to work.
441 *
442 * - with 256 PIT ticks to read the value, we have 214us to
443 * see the same MSB (and overhead like doing a single TSC
444 * read per MSB value etc).
445 *
446 * - We're doing 2 reads per loop (LSB, MSB), and we expect
447 * them each to take about a microsecond on real hardware.
448 * So we expect a count value of around 100. But we'll be
449 * generous, and accept anything over 50.
450 *
451 * - if the PIT is stuck, and we see *many* more reads, we
452 * return early (and the next caller of pit_expect_msb()
453 * then consider it a failure when they don't see the
454 * next expected value).
455 *
456 * These expectations mean that we know that we have seen the
457 * transition from one expected value to another with a fairly
458 * high accuracy, and we didn't miss any events. We can thus
459 * use the TSC value at the transitions to calculate a pretty
460 * good value for the TSC frequencty.
461 */
462static inline int pit_verify_msb(unsigned char val)
463{
464 /* Ignore LSB */
465 inb(0x42);
466 return inb(0x42) == val;
467}
468
469static inline int pit_expect_msb(unsigned char val, u64 *tscp, unsigned long *deltap)
470{
471 int count;
472 u64 tsc = 0, prev_tsc = 0;
473
474 for (count = 0; count < 50000; count++) {
475 if (!pit_verify_msb(val))
476 break;
477 prev_tsc = tsc;
478 tsc = get_cycles();
479 }
480 *deltap = get_cycles() - prev_tsc;
481 *tscp = tsc;
482
483 /*
484 * We require _some_ success, but the quality control
485 * will be based on the error terms on the TSC values.
486 */
487 return count > 5;
488}
489
490/*
491 * How many MSB values do we want to see? We aim for
492 * a maximum error rate of 500ppm (in practice the
493 * real error is much smaller), but refuse to spend
494 * more than 50ms on it.
495 */
496#define MAX_QUICK_PIT_MS 50
497#define MAX_QUICK_PIT_ITERATIONS (MAX_QUICK_PIT_MS * PIT_TICK_RATE / 1000 / 256)
498
499static unsigned long quick_pit_calibrate(void)
500{
501 int i;
502 u64 tsc, delta;
503 unsigned long d1, d2;
504
505 if (!has_legacy_pic())
506 return 0;
507
508 /* Set the Gate high, disable speaker */
509 outb((inb(0x61) & ~0x02) | 0x01, 0x61);
510
511 /*
512 * Counter 2, mode 0 (one-shot), binary count
513 *
514 * NOTE! Mode 2 decrements by two (and then the
515 * output is flipped each time, giving the same
516 * final output frequency as a decrement-by-one),
517 * so mode 0 is much better when looking at the
518 * individual counts.
519 */
520 outb(0xb0, 0x43);
521
522 /* Start at 0xffff */
523 outb(0xff, 0x42);
524 outb(0xff, 0x42);
525
526 /*
527 * The PIT starts counting at the next edge, so we
528 * need to delay for a microsecond. The easiest way
529 * to do that is to just read back the 16-bit counter
530 * once from the PIT.
531 */
532 pit_verify_msb(0);
533
534 if (pit_expect_msb(0xff, &tsc, &d1)) {
535 for (i = 1; i <= MAX_QUICK_PIT_ITERATIONS; i++) {
536 if (!pit_expect_msb(0xff-i, &delta, &d2))
537 break;
538
539 delta -= tsc;
540
541 /*
542 * Extrapolate the error and fail fast if the error will
543 * never be below 500 ppm.
544 */
545 if (i == 1 &&
546 d1 + d2 >= (delta * MAX_QUICK_PIT_ITERATIONS) >> 11)
547 return 0;
548
549 /*
550 * Iterate until the error is less than 500 ppm
551 */
552 if (d1+d2 >= delta >> 11)
553 continue;
554
555 /*
556 * Check the PIT one more time to verify that
557 * all TSC reads were stable wrt the PIT.
558 *
559 * This also guarantees serialization of the
560 * last cycle read ('d2') in pit_expect_msb.
561 */
562 if (!pit_verify_msb(0xfe - i))
563 break;
564 goto success;
565 }
566 }
567 pr_info("Fast TSC calibration failed\n");
568 return 0;
569
570success:
571 /*
572 * Ok, if we get here, then we've seen the
573 * MSB of the PIT decrement 'i' times, and the
574 * error has shrunk to less than 500 ppm.
575 *
576 * As a result, we can depend on there not being
577 * any odd delays anywhere, and the TSC reads are
578 * reliable (within the error).
579 *
580 * kHz = ticks / time-in-seconds / 1000;
581 * kHz = (t2 - t1) / (I * 256 / PIT_TICK_RATE) / 1000
582 * kHz = ((t2 - t1) * PIT_TICK_RATE) / (I * 256 * 1000)
583 */
584 delta *= PIT_TICK_RATE;
585 do_div(delta, i*256*1000);
586 pr_info("Fast TSC calibration using PIT\n");
587 return delta;
588}
589
590/**
591 * native_calibrate_tsc
592 * Determine TSC frequency via CPUID, else return 0.
593 */
594unsigned long native_calibrate_tsc(void)
595{
596 unsigned int eax_denominator, ebx_numerator, ecx_hz, edx;
597 unsigned int crystal_khz;
598
599 if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL)
600 return 0;
601
602 if (boot_cpu_data.cpuid_level < 0x15)
603 return 0;
604
605 eax_denominator = ebx_numerator = ecx_hz = edx = 0;
606
607 /* CPUID 15H TSC/Crystal ratio, plus optionally Crystal Hz */
608 cpuid(0x15, &eax_denominator, &ebx_numerator, &ecx_hz, &edx);
609
610 if (ebx_numerator == 0 || eax_denominator == 0)
611 return 0;
612
613 crystal_khz = ecx_hz / 1000;
614
615 if (crystal_khz == 0) {
616 switch (boot_cpu_data.x86_model) {
617 case INTEL_FAM6_SKYLAKE_MOBILE:
618 case INTEL_FAM6_SKYLAKE_DESKTOP:
619 case INTEL_FAM6_KABYLAKE_MOBILE:
620 case INTEL_FAM6_KABYLAKE_DESKTOP:
621 crystal_khz = 24000; /* 24.0 MHz */
622 break;
623 case INTEL_FAM6_ATOM_DENVERTON:
624 crystal_khz = 25000; /* 25.0 MHz */
625 break;
626 case INTEL_FAM6_ATOM_GOLDMONT:
627 crystal_khz = 19200; /* 19.2 MHz */
628 break;
629 }
630 }
631
632 if (crystal_khz == 0)
633 return 0;
634 /*
635 * TSC frequency determined by CPUID is a "hardware reported"
636 * frequency and is the most accurate one so far we have. This
637 * is considered a known frequency.
638 */
639 setup_force_cpu_cap(X86_FEATURE_TSC_KNOWN_FREQ);
640
641 /*
642 * For Atom SoCs TSC is the only reliable clocksource.
643 * Mark TSC reliable so no watchdog on it.
644 */
645 if (boot_cpu_data.x86_model == INTEL_FAM6_ATOM_GOLDMONT)
646 setup_force_cpu_cap(X86_FEATURE_TSC_RELIABLE);
647
648 return crystal_khz * ebx_numerator / eax_denominator;
649}
650
651static unsigned long cpu_khz_from_cpuid(void)
652{
653 unsigned int eax_base_mhz, ebx_max_mhz, ecx_bus_mhz, edx;
654
655 if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL)
656 return 0;
657
658 if (boot_cpu_data.cpuid_level < 0x16)
659 return 0;
660
661 eax_base_mhz = ebx_max_mhz = ecx_bus_mhz = edx = 0;
662
663 cpuid(0x16, &eax_base_mhz, &ebx_max_mhz, &ecx_bus_mhz, &edx);
664
665 return eax_base_mhz * 1000;
666}
667
668/**
669 * native_calibrate_cpu - calibrate the cpu on boot
670 */
671unsigned long native_calibrate_cpu(void)
672{
673 u64 tsc1, tsc2, delta, ref1, ref2;
674 unsigned long tsc_pit_min = ULONG_MAX, tsc_ref_min = ULONG_MAX;
675 unsigned long flags, latch, ms, fast_calibrate;
676 int hpet = is_hpet_enabled(), i, loopmin;
677
678 fast_calibrate = cpu_khz_from_cpuid();
679 if (fast_calibrate)
680 return fast_calibrate;
681
682 fast_calibrate = cpu_khz_from_msr();
683 if (fast_calibrate)
684 return fast_calibrate;
685
686 local_irq_save(flags);
687 fast_calibrate = quick_pit_calibrate();
688 local_irq_restore(flags);
689 if (fast_calibrate)
690 return fast_calibrate;
691
692 /*
693 * Run 5 calibration loops to get the lowest frequency value
694 * (the best estimate). We use two different calibration modes
695 * here:
696 *
697 * 1) PIT loop. We set the PIT Channel 2 to oneshot mode and
698 * load a timeout of 50ms. We read the time right after we
699 * started the timer and wait until the PIT count down reaches
700 * zero. In each wait loop iteration we read the TSC and check
701 * the delta to the previous read. We keep track of the min
702 * and max values of that delta. The delta is mostly defined
703 * by the IO time of the PIT access, so we can detect when a
704 * SMI/SMM disturbance happened between the two reads. If the
705 * maximum time is significantly larger than the minimum time,
706 * then we discard the result and have another try.
707 *
708 * 2) Reference counter. If available we use the HPET or the
709 * PMTIMER as a reference to check the sanity of that value.
710 * We use separate TSC readouts and check inside of the
711 * reference read for a SMI/SMM disturbance. We dicard
712 * disturbed values here as well. We do that around the PIT
713 * calibration delay loop as we have to wait for a certain
714 * amount of time anyway.
715 */
716
717 /* Preset PIT loop values */
718 latch = CAL_LATCH;
719 ms = CAL_MS;
720 loopmin = CAL_PIT_LOOPS;
721
722 for (i = 0; i < 3; i++) {
723 unsigned long tsc_pit_khz;
724
725 /*
726 * Read the start value and the reference count of
727 * hpet/pmtimer when available. Then do the PIT
728 * calibration, which will take at least 50ms, and
729 * read the end value.
730 */
731 local_irq_save(flags);
732 tsc1 = tsc_read_refs(&ref1, hpet);
733 tsc_pit_khz = pit_calibrate_tsc(latch, ms, loopmin);
734 tsc2 = tsc_read_refs(&ref2, hpet);
735 local_irq_restore(flags);
736
737 /* Pick the lowest PIT TSC calibration so far */
738 tsc_pit_min = min(tsc_pit_min, tsc_pit_khz);
739
740 /* hpet or pmtimer available ? */
741 if (ref1 == ref2)
742 continue;
743
744 /* Check, whether the sampling was disturbed by an SMI */
745 if (tsc1 == ULLONG_MAX || tsc2 == ULLONG_MAX)
746 continue;
747
748 tsc2 = (tsc2 - tsc1) * 1000000LL;
749 if (hpet)
750 tsc2 = calc_hpet_ref(tsc2, ref1, ref2);
751 else
752 tsc2 = calc_pmtimer_ref(tsc2, ref1, ref2);
753
754 tsc_ref_min = min(tsc_ref_min, (unsigned long) tsc2);
755
756 /* Check the reference deviation */
757 delta = ((u64) tsc_pit_min) * 100;
758 do_div(delta, tsc_ref_min);
759
760 /*
761 * If both calibration results are inside a 10% window
762 * then we can be sure, that the calibration
763 * succeeded. We break out of the loop right away. We
764 * use the reference value, as it is more precise.
765 */
766 if (delta >= 90 && delta <= 110) {
767 pr_info("PIT calibration matches %s. %d loops\n",
768 hpet ? "HPET" : "PMTIMER", i + 1);
769 return tsc_ref_min;
770 }
771
772 /*
773 * Check whether PIT failed more than once. This
774 * happens in virtualized environments. We need to
775 * give the virtual PC a slightly longer timeframe for
776 * the HPET/PMTIMER to make the result precise.
777 */
778 if (i == 1 && tsc_pit_min == ULONG_MAX) {
779 latch = CAL2_LATCH;
780 ms = CAL2_MS;
781 loopmin = CAL2_PIT_LOOPS;
782 }
783 }
784
785 /*
786 * Now check the results.
787 */
788 if (tsc_pit_min == ULONG_MAX) {
789 /* PIT gave no useful value */
790 pr_warn("Unable to calibrate against PIT\n");
791
792 /* We don't have an alternative source, disable TSC */
793 if (!hpet && !ref1 && !ref2) {
794 pr_notice("No reference (HPET/PMTIMER) available\n");
795 return 0;
796 }
797
798 /* The alternative source failed as well, disable TSC */
799 if (tsc_ref_min == ULONG_MAX) {
800 pr_warn("HPET/PMTIMER calibration failed\n");
801 return 0;
802 }
803
804 /* Use the alternative source */
805 pr_info("using %s reference calibration\n",
806 hpet ? "HPET" : "PMTIMER");
807
808 return tsc_ref_min;
809 }
810
811 /* We don't have an alternative source, use the PIT calibration value */
812 if (!hpet && !ref1 && !ref2) {
813 pr_info("Using PIT calibration value\n");
814 return tsc_pit_min;
815 }
816
817 /* The alternative source failed, use the PIT calibration value */
818 if (tsc_ref_min == ULONG_MAX) {
819 pr_warn("HPET/PMTIMER calibration failed. Using PIT calibration.\n");
820 return tsc_pit_min;
821 }
822
823 /*
824 * The calibration values differ too much. In doubt, we use
825 * the PIT value as we know that there are PMTIMERs around
826 * running at double speed. At least we let the user know:
827 */
828 pr_warn("PIT calibration deviates from %s: %lu %lu\n",
829 hpet ? "HPET" : "PMTIMER", tsc_pit_min, tsc_ref_min);
830 pr_info("Using PIT calibration value\n");
831 return tsc_pit_min;
832}
833
834void recalibrate_cpu_khz(void)
835{
836#ifndef CONFIG_SMP
837 unsigned long cpu_khz_old = cpu_khz;
838
839 if (!boot_cpu_has(X86_FEATURE_TSC))
840 return;
841
842 cpu_khz = x86_platform.calibrate_cpu();
843 tsc_khz = x86_platform.calibrate_tsc();
844 if (tsc_khz == 0)
845 tsc_khz = cpu_khz;
846 else if (abs(cpu_khz - tsc_khz) * 10 > tsc_khz)
847 cpu_khz = tsc_khz;
848 cpu_data(0).loops_per_jiffy = cpufreq_scale(cpu_data(0).loops_per_jiffy,
849 cpu_khz_old, cpu_khz);
850#endif
851}
852
853EXPORT_SYMBOL(recalibrate_cpu_khz);
854
855
856static unsigned long long cyc2ns_suspend;
857
858void tsc_save_sched_clock_state(void)
859{
860 if (!sched_clock_stable())
861 return;
862
863 cyc2ns_suspend = sched_clock();
864}
865
866/*
867 * Even on processors with invariant TSC, TSC gets reset in some the
868 * ACPI system sleep states. And in some systems BIOS seem to reinit TSC to
869 * arbitrary value (still sync'd across cpu's) during resume from such sleep
870 * states. To cope up with this, recompute the cyc2ns_offset for each cpu so
871 * that sched_clock() continues from the point where it was left off during
872 * suspend.
873 */
874void tsc_restore_sched_clock_state(void)
875{
876 unsigned long long offset;
877 unsigned long flags;
878 int cpu;
879
880 if (!sched_clock_stable())
881 return;
882
883 local_irq_save(flags);
884
885 /*
886 * We're coming out of suspend, there's no concurrency yet; don't
887 * bother being nice about the RCU stuff, just write to both
888 * data fields.
889 */
890
891 this_cpu_write(cyc2ns.data[0].cyc2ns_offset, 0);
892 this_cpu_write(cyc2ns.data[1].cyc2ns_offset, 0);
893
894 offset = cyc2ns_suspend - sched_clock();
895
896 for_each_possible_cpu(cpu) {
897 per_cpu(cyc2ns.data[0].cyc2ns_offset, cpu) = offset;
898 per_cpu(cyc2ns.data[1].cyc2ns_offset, cpu) = offset;
899 }
900
901 local_irq_restore(flags);
902}
903
904#ifdef CONFIG_CPU_FREQ
905/* Frequency scaling support. Adjust the TSC based timer when the cpu frequency
906 * changes.
907 *
908 * RED-PEN: On SMP we assume all CPUs run with the same frequency. It's
909 * not that important because current Opteron setups do not support
910 * scaling on SMP anyroads.
911 *
912 * Should fix up last_tsc too. Currently gettimeofday in the
913 * first tick after the change will be slightly wrong.
914 */
915
916static unsigned int ref_freq;
917static unsigned long loops_per_jiffy_ref;
918static unsigned long tsc_khz_ref;
919
920static int time_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
921 void *data)
922{
923 struct cpufreq_freqs *freq = data;
924 unsigned long *lpj;
925
926 lpj = &boot_cpu_data.loops_per_jiffy;
927#ifdef CONFIG_SMP
928 if (!(freq->flags & CPUFREQ_CONST_LOOPS))
929 lpj = &cpu_data(freq->cpu).loops_per_jiffy;
930#endif
931
932 if (!ref_freq) {
933 ref_freq = freq->old;
934 loops_per_jiffy_ref = *lpj;
935 tsc_khz_ref = tsc_khz;
936 }
937 if ((val == CPUFREQ_PRECHANGE && freq->old < freq->new) ||
938 (val == CPUFREQ_POSTCHANGE && freq->old > freq->new)) {
939 *lpj = cpufreq_scale(loops_per_jiffy_ref, ref_freq, freq->new);
940
941 tsc_khz = cpufreq_scale(tsc_khz_ref, ref_freq, freq->new);
942 if (!(freq->flags & CPUFREQ_CONST_LOOPS))
943 mark_tsc_unstable("cpufreq changes");
944
945 set_cyc2ns_scale(tsc_khz, freq->cpu, rdtsc());
946 }
947
948 return 0;
949}
950
951static struct notifier_block time_cpufreq_notifier_block = {
952 .notifier_call = time_cpufreq_notifier
953};
954
955static int __init cpufreq_register_tsc_scaling(void)
956{
957 if (!boot_cpu_has(X86_FEATURE_TSC))
958 return 0;
959 if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC))
960 return 0;
961 cpufreq_register_notifier(&time_cpufreq_notifier_block,
962 CPUFREQ_TRANSITION_NOTIFIER);
963 return 0;
964}
965
966core_initcall(cpufreq_register_tsc_scaling);
967
968#endif /* CONFIG_CPU_FREQ */
969
970#define ART_CPUID_LEAF (0x15)
971#define ART_MIN_DENOMINATOR (1)
972
973
974/*
975 * If ART is present detect the numerator:denominator to convert to TSC
976 */
977static void __init detect_art(void)
978{
979 unsigned int unused[2];
980
981 if (boot_cpu_data.cpuid_level < ART_CPUID_LEAF)
982 return;
983
984 /*
985 * Don't enable ART in a VM, non-stop TSC and TSC_ADJUST required,
986 * and the TSC counter resets must not occur asynchronously.
987 */
988 if (boot_cpu_has(X86_FEATURE_HYPERVISOR) ||
989 !boot_cpu_has(X86_FEATURE_NONSTOP_TSC) ||
990 !boot_cpu_has(X86_FEATURE_TSC_ADJUST) ||
991 tsc_async_resets)
992 return;
993
994 cpuid(ART_CPUID_LEAF, &art_to_tsc_denominator,
995 &art_to_tsc_numerator, unused, unused+1);
996
997 if (art_to_tsc_denominator < ART_MIN_DENOMINATOR)
998 return;
999
1000 rdmsrl(MSR_IA32_TSC_ADJUST, art_to_tsc_offset);
1001
1002 /* Make this sticky over multiple CPU init calls */
1003 setup_force_cpu_cap(X86_FEATURE_ART);
1004}
1005
1006
1007/* clocksource code */
1008
1009static void tsc_resume(struct clocksource *cs)
1010{
1011 tsc_verify_tsc_adjust(true);
1012}
1013
1014/*
1015 * We used to compare the TSC to the cycle_last value in the clocksource
1016 * structure to avoid a nasty time-warp. This can be observed in a
1017 * very small window right after one CPU updated cycle_last under
1018 * xtime/vsyscall_gtod lock and the other CPU reads a TSC value which
1019 * is smaller than the cycle_last reference value due to a TSC which
1020 * is slighty behind. This delta is nowhere else observable, but in
1021 * that case it results in a forward time jump in the range of hours
1022 * due to the unsigned delta calculation of the time keeping core
1023 * code, which is necessary to support wrapping clocksources like pm
1024 * timer.
1025 *
1026 * This sanity check is now done in the core timekeeping code.
1027 * checking the result of read_tsc() - cycle_last for being negative.
1028 * That works because CLOCKSOURCE_MASK(64) does not mask out any bit.
1029 */
1030static u64 read_tsc(struct clocksource *cs)
1031{
1032 return (u64)rdtsc_ordered();
1033}
1034
1035static void tsc_cs_mark_unstable(struct clocksource *cs)
1036{
1037 if (tsc_unstable)
1038 return;
1039
1040 tsc_unstable = 1;
1041 if (using_native_sched_clock())
1042 clear_sched_clock_stable();
1043 disable_sched_clock_irqtime();
1044 pr_info("Marking TSC unstable due to clocksource watchdog\n");
1045}
1046
1047static void tsc_cs_tick_stable(struct clocksource *cs)
1048{
1049 if (tsc_unstable)
1050 return;
1051
1052 if (using_native_sched_clock())
1053 sched_clock_tick_stable();
1054}
1055
1056/*
1057 * .mask MUST be CLOCKSOURCE_MASK(64). See comment above read_tsc()
1058 */
1059static struct clocksource clocksource_tsc_early = {
1060 .name = "tsc-early",
1061 .rating = 299,
1062 .read = read_tsc,
1063 .mask = CLOCKSOURCE_MASK(64),
1064 .flags = CLOCK_SOURCE_IS_CONTINUOUS |
1065 CLOCK_SOURCE_MUST_VERIFY,
1066 .archdata = { .vclock_mode = VCLOCK_TSC },
1067 .resume = tsc_resume,
1068 .mark_unstable = tsc_cs_mark_unstable,
1069 .tick_stable = tsc_cs_tick_stable,
1070 .list = LIST_HEAD_INIT(clocksource_tsc_early.list),
1071};
1072
1073/*
1074 * Must mark VALID_FOR_HRES early such that when we unregister tsc_early
1075 * this one will immediately take over. We will only register if TSC has
1076 * been found good.
1077 */
1078static struct clocksource clocksource_tsc = {
1079 .name = "tsc",
1080 .rating = 300,
1081 .read = read_tsc,
1082 .mask = CLOCKSOURCE_MASK(64),
1083 .flags = CLOCK_SOURCE_IS_CONTINUOUS |
1084 CLOCK_SOURCE_VALID_FOR_HRES |
1085 CLOCK_SOURCE_MUST_VERIFY,
1086 .archdata = { .vclock_mode = VCLOCK_TSC },
1087 .resume = tsc_resume,
1088 .mark_unstable = tsc_cs_mark_unstable,
1089 .tick_stable = tsc_cs_tick_stable,
1090 .list = LIST_HEAD_INIT(clocksource_tsc.list),
1091};
1092
1093void mark_tsc_unstable(char *reason)
1094{
1095 if (tsc_unstable)
1096 return;
1097
1098 tsc_unstable = 1;
1099 if (using_native_sched_clock())
1100 clear_sched_clock_stable();
1101 disable_sched_clock_irqtime();
1102 pr_info("Marking TSC unstable due to %s\n", reason);
1103
1104 clocksource_mark_unstable(&clocksource_tsc_early);
1105 clocksource_mark_unstable(&clocksource_tsc);
1106}
1107
1108EXPORT_SYMBOL_GPL(mark_tsc_unstable);
1109
1110static void __init check_system_tsc_reliable(void)
1111{
1112#if defined(CONFIG_MGEODEGX1) || defined(CONFIG_MGEODE_LX) || defined(CONFIG_X86_GENERIC)
1113 if (is_geode_lx()) {
1114 /* RTSC counts during suspend */
1115#define RTSC_SUSP 0x100
1116 unsigned long res_low, res_high;
1117
1118 rdmsr_safe(MSR_GEODE_BUSCONT_CONF0, &res_low, &res_high);
1119 /* Geode_LX - the OLPC CPU has a very reliable TSC */
1120 if (res_low & RTSC_SUSP)
1121 tsc_clocksource_reliable = 1;
1122 }
1123#endif
1124 if (boot_cpu_has(X86_FEATURE_TSC_RELIABLE))
1125 tsc_clocksource_reliable = 1;
1126}
1127
1128/*
1129 * Make an educated guess if the TSC is trustworthy and synchronized
1130 * over all CPUs.
1131 */
1132int unsynchronized_tsc(void)
1133{
1134 if (!boot_cpu_has(X86_FEATURE_TSC) || tsc_unstable)
1135 return 1;
1136
1137#ifdef CONFIG_SMP
1138 if (apic_is_clustered_box())
1139 return 1;
1140#endif
1141
1142 if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC))
1143 return 0;
1144
1145 if (tsc_clocksource_reliable)
1146 return 0;
1147 /*
1148 * Intel systems are normally all synchronized.
1149 * Exceptions must mark TSC as unstable:
1150 */
1151 if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL) {
1152 /* assume multi socket systems are not synchronized: */
1153 if (num_possible_cpus() > 1)
1154 return 1;
1155 }
1156
1157 return 0;
1158}
1159
1160/*
1161 * Convert ART to TSC given numerator/denominator found in detect_art()
1162 */
1163struct system_counterval_t convert_art_to_tsc(u64 art)
1164{
1165 u64 tmp, res, rem;
1166
1167 rem = do_div(art, art_to_tsc_denominator);
1168
1169 res = art * art_to_tsc_numerator;
1170 tmp = rem * art_to_tsc_numerator;
1171
1172 do_div(tmp, art_to_tsc_denominator);
1173 res += tmp + art_to_tsc_offset;
1174
1175 return (struct system_counterval_t) {.cs = art_related_clocksource,
1176 .cycles = res};
1177}
1178EXPORT_SYMBOL(convert_art_to_tsc);
1179
1180/**
1181 * convert_art_ns_to_tsc() - Convert ART in nanoseconds to TSC.
1182 * @art_ns: ART (Always Running Timer) in unit of nanoseconds
1183 *
1184 * PTM requires all timestamps to be in units of nanoseconds. When user
1185 * software requests a cross-timestamp, this function converts system timestamp
1186 * to TSC.
1187 *
1188 * This is valid when CPU feature flag X86_FEATURE_TSC_KNOWN_FREQ is set
1189 * indicating the tsc_khz is derived from CPUID[15H]. Drivers should check
1190 * that this flag is set before conversion to TSC is attempted.
1191 *
1192 * Return:
1193 * struct system_counterval_t - system counter value with the pointer to the
1194 * corresponding clocksource
1195 * @cycles: System counter value
1196 * @cs: Clocksource corresponding to system counter value. Used
1197 * by timekeeping code to verify comparibility of two cycle
1198 * values.
1199 */
1200
1201struct system_counterval_t convert_art_ns_to_tsc(u64 art_ns)
1202{
1203 u64 tmp, res, rem;
1204
1205 rem = do_div(art_ns, USEC_PER_SEC);
1206
1207 res = art_ns * tsc_khz;
1208 tmp = rem * tsc_khz;
1209
1210 do_div(tmp, USEC_PER_SEC);
1211 res += tmp;
1212
1213 return (struct system_counterval_t) { .cs = art_related_clocksource,
1214 .cycles = res};
1215}
1216EXPORT_SYMBOL(convert_art_ns_to_tsc);
1217
1218
1219static void tsc_refine_calibration_work(struct work_struct *work);
1220static DECLARE_DELAYED_WORK(tsc_irqwork, tsc_refine_calibration_work);
1221/**
1222 * tsc_refine_calibration_work - Further refine tsc freq calibration
1223 * @work - ignored.
1224 *
1225 * This functions uses delayed work over a period of a
1226 * second to further refine the TSC freq value. Since this is
1227 * timer based, instead of loop based, we don't block the boot
1228 * process while this longer calibration is done.
1229 *
1230 * If there are any calibration anomalies (too many SMIs, etc),
1231 * or the refined calibration is off by 1% of the fast early
1232 * calibration, we throw out the new calibration and use the
1233 * early calibration.
1234 */
1235static void tsc_refine_calibration_work(struct work_struct *work)
1236{
1237 static u64 tsc_start = -1, ref_start;
1238 static int hpet;
1239 u64 tsc_stop, ref_stop, delta;
1240 unsigned long freq;
1241 int cpu;
1242
1243 /* Don't bother refining TSC on unstable systems */
1244 if (tsc_unstable)
1245 goto unreg;
1246
1247 /*
1248 * Since the work is started early in boot, we may be
1249 * delayed the first time we expire. So set the workqueue
1250 * again once we know timers are working.
1251 */
1252 if (tsc_start == -1) {
1253 /*
1254 * Only set hpet once, to avoid mixing hardware
1255 * if the hpet becomes enabled later.
1256 */
1257 hpet = is_hpet_enabled();
1258 schedule_delayed_work(&tsc_irqwork, HZ);
1259 tsc_start = tsc_read_refs(&ref_start, hpet);
1260 return;
1261 }
1262
1263 tsc_stop = tsc_read_refs(&ref_stop, hpet);
1264
1265 /* hpet or pmtimer available ? */
1266 if (ref_start == ref_stop)
1267 goto out;
1268
1269 /* Check, whether the sampling was disturbed by an SMI */
1270 if (tsc_start == ULLONG_MAX || tsc_stop == ULLONG_MAX)
1271 goto out;
1272
1273 delta = tsc_stop - tsc_start;
1274 delta *= 1000000LL;
1275 if (hpet)
1276 freq = calc_hpet_ref(delta, ref_start, ref_stop);
1277 else
1278 freq = calc_pmtimer_ref(delta, ref_start, ref_stop);
1279
1280 /* Make sure we're within 1% */
1281 if (abs(tsc_khz - freq) > tsc_khz/100)
1282 goto out;
1283
1284 tsc_khz = freq;
1285 pr_info("Refined TSC clocksource calibration: %lu.%03lu MHz\n",
1286 (unsigned long)tsc_khz / 1000,
1287 (unsigned long)tsc_khz % 1000);
1288
1289 /* Inform the TSC deadline clockevent devices about the recalibration */
1290 lapic_update_tsc_freq();
1291
1292 /* Update the sched_clock() rate to match the clocksource one */
1293 for_each_possible_cpu(cpu)
1294 set_cyc2ns_scale(tsc_khz, cpu, tsc_stop);
1295
1296out:
1297 if (tsc_unstable)
1298 goto unreg;
1299
1300 if (boot_cpu_has(X86_FEATURE_ART))
1301 art_related_clocksource = &clocksource_tsc;
1302 clocksource_register_khz(&clocksource_tsc, tsc_khz);
1303unreg:
1304 clocksource_unregister(&clocksource_tsc_early);
1305}
1306
1307
1308static int __init init_tsc_clocksource(void)
1309{
1310 if (!boot_cpu_has(X86_FEATURE_TSC) || tsc_disabled > 0 || !tsc_khz)
1311 return 0;
1312
1313 if (tsc_unstable)
1314 goto unreg;
1315
1316 if (tsc_clocksource_reliable)
1317 clocksource_tsc.flags &= ~CLOCK_SOURCE_MUST_VERIFY;
1318
1319 if (boot_cpu_has(X86_FEATURE_NONSTOP_TSC_S3))
1320 clocksource_tsc.flags |= CLOCK_SOURCE_SUSPEND_NONSTOP;
1321
1322 /*
1323 * When TSC frequency is known (retrieved via MSR or CPUID), we skip
1324 * the refined calibration and directly register it as a clocksource.
1325 */
1326 if (boot_cpu_has(X86_FEATURE_TSC_KNOWN_FREQ)) {
1327 if (boot_cpu_has(X86_FEATURE_ART))
1328 art_related_clocksource = &clocksource_tsc;
1329 clocksource_register_khz(&clocksource_tsc, tsc_khz);
1330unreg:
1331 clocksource_unregister(&clocksource_tsc_early);
1332 return 0;
1333 }
1334
1335 schedule_delayed_work(&tsc_irqwork, 0);
1336 return 0;
1337}
1338/*
1339 * We use device_initcall here, to ensure we run after the hpet
1340 * is fully initialized, which may occur at fs_initcall time.
1341 */
1342device_initcall(init_tsc_clocksource);
1343
1344void __init tsc_early_delay_calibrate(void)
1345{
1346 unsigned long lpj;
1347
1348 if (!boot_cpu_has(X86_FEATURE_TSC))
1349 return;
1350
1351 cpu_khz = x86_platform.calibrate_cpu();
1352 tsc_khz = x86_platform.calibrate_tsc();
1353
1354 tsc_khz = tsc_khz ? : cpu_khz;
1355 if (!tsc_khz)
1356 return;
1357
1358 lpj = tsc_khz * 1000;
1359 do_div(lpj, HZ);
1360 loops_per_jiffy = lpj;
1361}
1362
1363void __init tsc_init(void)
1364{
1365 u64 lpj, cyc;
1366 int cpu;
1367
1368 if (!boot_cpu_has(X86_FEATURE_TSC)) {
1369 setup_clear_cpu_cap(X86_FEATURE_TSC_DEADLINE_TIMER);
1370 return;
1371 }
1372
1373 cpu_khz = x86_platform.calibrate_cpu();
1374 tsc_khz = x86_platform.calibrate_tsc();
1375
1376 /*
1377 * Trust non-zero tsc_khz as authorative,
1378 * and use it to sanity check cpu_khz,
1379 * which will be off if system timer is off.
1380 */
1381 if (tsc_khz == 0)
1382 tsc_khz = cpu_khz;
1383 else if (abs(cpu_khz - tsc_khz) * 10 > tsc_khz)
1384 cpu_khz = tsc_khz;
1385
1386 if (!tsc_khz) {
1387 mark_tsc_unstable("could not calculate TSC khz");
1388 setup_clear_cpu_cap(X86_FEATURE_TSC_DEADLINE_TIMER);
1389 return;
1390 }
1391
1392 pr_info("Detected %lu.%03lu MHz processor\n",
1393 (unsigned long)cpu_khz / 1000,
1394 (unsigned long)cpu_khz % 1000);
1395
1396 if (cpu_khz != tsc_khz) {
1397 pr_info("Detected %lu.%03lu MHz TSC",
1398 (unsigned long)tsc_khz / 1000,
1399 (unsigned long)tsc_khz % 1000);
1400 }
1401
1402 /* Sanitize TSC ADJUST before cyc2ns gets initialized */
1403 tsc_store_and_check_tsc_adjust(true);
1404
1405 /*
1406 * Secondary CPUs do not run through tsc_init(), so set up
1407 * all the scale factors for all CPUs, assuming the same
1408 * speed as the bootup CPU. (cpufreq notifiers will fix this
1409 * up if their speed diverges)
1410 */
1411 cyc = rdtsc();
1412 for_each_possible_cpu(cpu) {
1413 cyc2ns_init(cpu);
1414 set_cyc2ns_scale(tsc_khz, cpu, cyc);
1415 }
1416
1417 if (tsc_disabled > 0)
1418 return;
1419
1420 /* now allow native_sched_clock() to use rdtsc */
1421
1422 tsc_disabled = 0;
1423 static_branch_enable(&__use_tsc);
1424
1425 if (!no_sched_irq_time)
1426 enable_sched_clock_irqtime();
1427
1428 lpj = ((u64)tsc_khz * 1000);
1429 do_div(lpj, HZ);
1430 lpj_fine = lpj;
1431
1432 use_tsc_delay();
1433
1434 check_system_tsc_reliable();
1435
1436 if (unsynchronized_tsc()) {
1437 mark_tsc_unstable("TSCs unsynchronized");
1438 return;
1439 }
1440
1441 clocksource_register_khz(&clocksource_tsc_early, tsc_khz);
1442 detect_art();
1443}
1444
1445#ifdef CONFIG_SMP
1446/*
1447 * If we have a constant TSC and are using the TSC for the delay loop,
1448 * we can skip clock calibration if another cpu in the same socket has already
1449 * been calibrated. This assumes that CONSTANT_TSC applies to all
1450 * cpus in the socket - this should be a safe assumption.
1451 */
1452unsigned long calibrate_delay_is_known(void)
1453{
1454 int sibling, cpu = smp_processor_id();
1455 int constant_tsc = cpu_has(&cpu_data(cpu), X86_FEATURE_CONSTANT_TSC);
1456 const struct cpumask *mask = topology_core_cpumask(cpu);
1457
1458 if (tsc_disabled || !constant_tsc || !mask)
1459 return 0;
1460
1461 sibling = cpumask_any_but(mask, cpu);
1462 if (sibling < nr_cpu_ids)
1463 return cpu_data(sibling).loops_per_jiffy;
1464 return 0;
1465}
1466#endif
1// SPDX-License-Identifier: GPL-2.0-only
2#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
3
4#include <linux/kernel.h>
5#include <linux/sched.h>
6#include <linux/sched/clock.h>
7#include <linux/init.h>
8#include <linux/export.h>
9#include <linux/timer.h>
10#include <linux/acpi_pmtmr.h>
11#include <linux/cpufreq.h>
12#include <linux/delay.h>
13#include <linux/clocksource.h>
14#include <linux/percpu.h>
15#include <linux/timex.h>
16#include <linux/static_key.h>
17#include <linux/static_call.h>
18
19#include <asm/hpet.h>
20#include <asm/timer.h>
21#include <asm/vgtod.h>
22#include <asm/time.h>
23#include <asm/delay.h>
24#include <asm/hypervisor.h>
25#include <asm/nmi.h>
26#include <asm/x86_init.h>
27#include <asm/geode.h>
28#include <asm/apic.h>
29#include <asm/intel-family.h>
30#include <asm/i8259.h>
31#include <asm/uv/uv.h>
32
33unsigned int __read_mostly cpu_khz; /* TSC clocks / usec, not used here */
34EXPORT_SYMBOL(cpu_khz);
35
36unsigned int __read_mostly tsc_khz;
37EXPORT_SYMBOL(tsc_khz);
38
39#define KHZ 1000
40
41/*
42 * TSC can be unstable due to cpufreq or due to unsynced TSCs
43 */
44static int __read_mostly tsc_unstable;
45static unsigned int __initdata tsc_early_khz;
46
47static DEFINE_STATIC_KEY_FALSE(__use_tsc);
48
49int tsc_clocksource_reliable;
50
51static u32 art_to_tsc_numerator;
52static u32 art_to_tsc_denominator;
53static u64 art_to_tsc_offset;
54static struct clocksource *art_related_clocksource;
55
56struct cyc2ns {
57 struct cyc2ns_data data[2]; /* 0 + 2*16 = 32 */
58 seqcount_latch_t seq; /* 32 + 4 = 36 */
59
60}; /* fits one cacheline */
61
62static DEFINE_PER_CPU_ALIGNED(struct cyc2ns, cyc2ns);
63
64static int __init tsc_early_khz_setup(char *buf)
65{
66 return kstrtouint(buf, 0, &tsc_early_khz);
67}
68early_param("tsc_early_khz", tsc_early_khz_setup);
69
70__always_inline void cyc2ns_read_begin(struct cyc2ns_data *data)
71{
72 int seq, idx;
73
74 preempt_disable_notrace();
75
76 do {
77 seq = this_cpu_read(cyc2ns.seq.seqcount.sequence);
78 idx = seq & 1;
79
80 data->cyc2ns_offset = this_cpu_read(cyc2ns.data[idx].cyc2ns_offset);
81 data->cyc2ns_mul = this_cpu_read(cyc2ns.data[idx].cyc2ns_mul);
82 data->cyc2ns_shift = this_cpu_read(cyc2ns.data[idx].cyc2ns_shift);
83
84 } while (unlikely(seq != this_cpu_read(cyc2ns.seq.seqcount.sequence)));
85}
86
87__always_inline void cyc2ns_read_end(void)
88{
89 preempt_enable_notrace();
90}
91
92/*
93 * Accelerators for sched_clock()
94 * convert from cycles(64bits) => nanoseconds (64bits)
95 * basic equation:
96 * ns = cycles / (freq / ns_per_sec)
97 * ns = cycles * (ns_per_sec / freq)
98 * ns = cycles * (10^9 / (cpu_khz * 10^3))
99 * ns = cycles * (10^6 / cpu_khz)
100 *
101 * Then we use scaling math (suggested by george@mvista.com) to get:
102 * ns = cycles * (10^6 * SC / cpu_khz) / SC
103 * ns = cycles * cyc2ns_scale / SC
104 *
105 * And since SC is a constant power of two, we can convert the div
106 * into a shift. The larger SC is, the more accurate the conversion, but
107 * cyc2ns_scale needs to be a 32-bit value so that 32-bit multiplication
108 * (64-bit result) can be used.
109 *
110 * We can use khz divisor instead of mhz to keep a better precision.
111 * (mathieu.desnoyers@polymtl.ca)
112 *
113 * -johnstul@us.ibm.com "math is hard, lets go shopping!"
114 */
115
116static __always_inline unsigned long long cycles_2_ns(unsigned long long cyc)
117{
118 struct cyc2ns_data data;
119 unsigned long long ns;
120
121 cyc2ns_read_begin(&data);
122
123 ns = data.cyc2ns_offset;
124 ns += mul_u64_u32_shr(cyc, data.cyc2ns_mul, data.cyc2ns_shift);
125
126 cyc2ns_read_end();
127
128 return ns;
129}
130
131static void __set_cyc2ns_scale(unsigned long khz, int cpu, unsigned long long tsc_now)
132{
133 unsigned long long ns_now;
134 struct cyc2ns_data data;
135 struct cyc2ns *c2n;
136
137 ns_now = cycles_2_ns(tsc_now);
138
139 /*
140 * Compute a new multiplier as per the above comment and ensure our
141 * time function is continuous; see the comment near struct
142 * cyc2ns_data.
143 */
144 clocks_calc_mult_shift(&data.cyc2ns_mul, &data.cyc2ns_shift, khz,
145 NSEC_PER_MSEC, 0);
146
147 /*
148 * cyc2ns_shift is exported via arch_perf_update_userpage() where it is
149 * not expected to be greater than 31 due to the original published
150 * conversion algorithm shifting a 32-bit value (now specifies a 64-bit
151 * value) - refer perf_event_mmap_page documentation in perf_event.h.
152 */
153 if (data.cyc2ns_shift == 32) {
154 data.cyc2ns_shift = 31;
155 data.cyc2ns_mul >>= 1;
156 }
157
158 data.cyc2ns_offset = ns_now -
159 mul_u64_u32_shr(tsc_now, data.cyc2ns_mul, data.cyc2ns_shift);
160
161 c2n = per_cpu_ptr(&cyc2ns, cpu);
162
163 raw_write_seqcount_latch(&c2n->seq);
164 c2n->data[0] = data;
165 raw_write_seqcount_latch(&c2n->seq);
166 c2n->data[1] = data;
167}
168
169static void set_cyc2ns_scale(unsigned long khz, int cpu, unsigned long long tsc_now)
170{
171 unsigned long flags;
172
173 local_irq_save(flags);
174 sched_clock_idle_sleep_event();
175
176 if (khz)
177 __set_cyc2ns_scale(khz, cpu, tsc_now);
178
179 sched_clock_idle_wakeup_event();
180 local_irq_restore(flags);
181}
182
183/*
184 * Initialize cyc2ns for boot cpu
185 */
186static void __init cyc2ns_init_boot_cpu(void)
187{
188 struct cyc2ns *c2n = this_cpu_ptr(&cyc2ns);
189
190 seqcount_latch_init(&c2n->seq);
191 __set_cyc2ns_scale(tsc_khz, smp_processor_id(), rdtsc());
192}
193
194/*
195 * Secondary CPUs do not run through tsc_init(), so set up
196 * all the scale factors for all CPUs, assuming the same
197 * speed as the bootup CPU.
198 */
199static void __init cyc2ns_init_secondary_cpus(void)
200{
201 unsigned int cpu, this_cpu = smp_processor_id();
202 struct cyc2ns *c2n = this_cpu_ptr(&cyc2ns);
203 struct cyc2ns_data *data = c2n->data;
204
205 for_each_possible_cpu(cpu) {
206 if (cpu != this_cpu) {
207 seqcount_latch_init(&c2n->seq);
208 c2n = per_cpu_ptr(&cyc2ns, cpu);
209 c2n->data[0] = data[0];
210 c2n->data[1] = data[1];
211 }
212 }
213}
214
215/*
216 * Scheduler clock - returns current time in nanosec units.
217 */
218u64 native_sched_clock(void)
219{
220 if (static_branch_likely(&__use_tsc)) {
221 u64 tsc_now = rdtsc();
222
223 /* return the value in ns */
224 return cycles_2_ns(tsc_now);
225 }
226
227 /*
228 * Fall back to jiffies if there's no TSC available:
229 * ( But note that we still use it if the TSC is marked
230 * unstable. We do this because unlike Time Of Day,
231 * the scheduler clock tolerates small errors and it's
232 * very important for it to be as fast as the platform
233 * can achieve it. )
234 */
235
236 /* No locking but a rare wrong value is not a big deal: */
237 return (jiffies_64 - INITIAL_JIFFIES) * (1000000000 / HZ);
238}
239
240/*
241 * Generate a sched_clock if you already have a TSC value.
242 */
243u64 native_sched_clock_from_tsc(u64 tsc)
244{
245 return cycles_2_ns(tsc);
246}
247
248/* We need to define a real function for sched_clock, to override the
249 weak default version */
250#ifdef CONFIG_PARAVIRT
251unsigned long long sched_clock(void)
252{
253 return paravirt_sched_clock();
254}
255
256bool using_native_sched_clock(void)
257{
258 return static_call_query(pv_sched_clock) == native_sched_clock;
259}
260#else
261unsigned long long
262sched_clock(void) __attribute__((alias("native_sched_clock")));
263
264bool using_native_sched_clock(void) { return true; }
265#endif
266
267int check_tsc_unstable(void)
268{
269 return tsc_unstable;
270}
271EXPORT_SYMBOL_GPL(check_tsc_unstable);
272
273#ifdef CONFIG_X86_TSC
274int __init notsc_setup(char *str)
275{
276 mark_tsc_unstable("boot parameter notsc");
277 return 1;
278}
279#else
280/*
281 * disable flag for tsc. Takes effect by clearing the TSC cpu flag
282 * in cpu/common.c
283 */
284int __init notsc_setup(char *str)
285{
286 setup_clear_cpu_cap(X86_FEATURE_TSC);
287 return 1;
288}
289#endif
290
291__setup("notsc", notsc_setup);
292
293static int no_sched_irq_time;
294static int no_tsc_watchdog;
295
296static int __init tsc_setup(char *str)
297{
298 if (!strcmp(str, "reliable"))
299 tsc_clocksource_reliable = 1;
300 if (!strncmp(str, "noirqtime", 9))
301 no_sched_irq_time = 1;
302 if (!strcmp(str, "unstable"))
303 mark_tsc_unstable("boot parameter");
304 if (!strcmp(str, "nowatchdog"))
305 no_tsc_watchdog = 1;
306 return 1;
307}
308
309__setup("tsc=", tsc_setup);
310
311#define MAX_RETRIES 5
312#define TSC_DEFAULT_THRESHOLD 0x20000
313
314/*
315 * Read TSC and the reference counters. Take care of any disturbances
316 */
317static u64 tsc_read_refs(u64 *p, int hpet)
318{
319 u64 t1, t2;
320 u64 thresh = tsc_khz ? tsc_khz >> 5 : TSC_DEFAULT_THRESHOLD;
321 int i;
322
323 for (i = 0; i < MAX_RETRIES; i++) {
324 t1 = get_cycles();
325 if (hpet)
326 *p = hpet_readl(HPET_COUNTER) & 0xFFFFFFFF;
327 else
328 *p = acpi_pm_read_early();
329 t2 = get_cycles();
330 if ((t2 - t1) < thresh)
331 return t2;
332 }
333 return ULLONG_MAX;
334}
335
336/*
337 * Calculate the TSC frequency from HPET reference
338 */
339static unsigned long calc_hpet_ref(u64 deltatsc, u64 hpet1, u64 hpet2)
340{
341 u64 tmp;
342
343 if (hpet2 < hpet1)
344 hpet2 += 0x100000000ULL;
345 hpet2 -= hpet1;
346 tmp = ((u64)hpet2 * hpet_readl(HPET_PERIOD));
347 do_div(tmp, 1000000);
348 deltatsc = div64_u64(deltatsc, tmp);
349
350 return (unsigned long) deltatsc;
351}
352
353/*
354 * Calculate the TSC frequency from PMTimer reference
355 */
356static unsigned long calc_pmtimer_ref(u64 deltatsc, u64 pm1, u64 pm2)
357{
358 u64 tmp;
359
360 if (!pm1 && !pm2)
361 return ULONG_MAX;
362
363 if (pm2 < pm1)
364 pm2 += (u64)ACPI_PM_OVRRUN;
365 pm2 -= pm1;
366 tmp = pm2 * 1000000000LL;
367 do_div(tmp, PMTMR_TICKS_PER_SEC);
368 do_div(deltatsc, tmp);
369
370 return (unsigned long) deltatsc;
371}
372
373#define CAL_MS 10
374#define CAL_LATCH (PIT_TICK_RATE / (1000 / CAL_MS))
375#define CAL_PIT_LOOPS 1000
376
377#define CAL2_MS 50
378#define CAL2_LATCH (PIT_TICK_RATE / (1000 / CAL2_MS))
379#define CAL2_PIT_LOOPS 5000
380
381
382/*
383 * Try to calibrate the TSC against the Programmable
384 * Interrupt Timer and return the frequency of the TSC
385 * in kHz.
386 *
387 * Return ULONG_MAX on failure to calibrate.
388 */
389static unsigned long pit_calibrate_tsc(u32 latch, unsigned long ms, int loopmin)
390{
391 u64 tsc, t1, t2, delta;
392 unsigned long tscmin, tscmax;
393 int pitcnt;
394
395 if (!has_legacy_pic()) {
396 /*
397 * Relies on tsc_early_delay_calibrate() to have given us semi
398 * usable udelay(), wait for the same 50ms we would have with
399 * the PIT loop below.
400 */
401 udelay(10 * USEC_PER_MSEC);
402 udelay(10 * USEC_PER_MSEC);
403 udelay(10 * USEC_PER_MSEC);
404 udelay(10 * USEC_PER_MSEC);
405 udelay(10 * USEC_PER_MSEC);
406 return ULONG_MAX;
407 }
408
409 /* Set the Gate high, disable speaker */
410 outb((inb(0x61) & ~0x02) | 0x01, 0x61);
411
412 /*
413 * Setup CTC channel 2* for mode 0, (interrupt on terminal
414 * count mode), binary count. Set the latch register to 50ms
415 * (LSB then MSB) to begin countdown.
416 */
417 outb(0xb0, 0x43);
418 outb(latch & 0xff, 0x42);
419 outb(latch >> 8, 0x42);
420
421 tsc = t1 = t2 = get_cycles();
422
423 pitcnt = 0;
424 tscmax = 0;
425 tscmin = ULONG_MAX;
426 while ((inb(0x61) & 0x20) == 0) {
427 t2 = get_cycles();
428 delta = t2 - tsc;
429 tsc = t2;
430 if ((unsigned long) delta < tscmin)
431 tscmin = (unsigned int) delta;
432 if ((unsigned long) delta > tscmax)
433 tscmax = (unsigned int) delta;
434 pitcnt++;
435 }
436
437 /*
438 * Sanity checks:
439 *
440 * If we were not able to read the PIT more than loopmin
441 * times, then we have been hit by a massive SMI
442 *
443 * If the maximum is 10 times larger than the minimum,
444 * then we got hit by an SMI as well.
445 */
446 if (pitcnt < loopmin || tscmax > 10 * tscmin)
447 return ULONG_MAX;
448
449 /* Calculate the PIT value */
450 delta = t2 - t1;
451 do_div(delta, ms);
452 return delta;
453}
454
455/*
456 * This reads the current MSB of the PIT counter, and
457 * checks if we are running on sufficiently fast and
458 * non-virtualized hardware.
459 *
460 * Our expectations are:
461 *
462 * - the PIT is running at roughly 1.19MHz
463 *
464 * - each IO is going to take about 1us on real hardware,
465 * but we allow it to be much faster (by a factor of 10) or
466 * _slightly_ slower (ie we allow up to a 2us read+counter
467 * update - anything else implies a unacceptably slow CPU
468 * or PIT for the fast calibration to work.
469 *
470 * - with 256 PIT ticks to read the value, we have 214us to
471 * see the same MSB (and overhead like doing a single TSC
472 * read per MSB value etc).
473 *
474 * - We're doing 2 reads per loop (LSB, MSB), and we expect
475 * them each to take about a microsecond on real hardware.
476 * So we expect a count value of around 100. But we'll be
477 * generous, and accept anything over 50.
478 *
479 * - if the PIT is stuck, and we see *many* more reads, we
480 * return early (and the next caller of pit_expect_msb()
481 * then consider it a failure when they don't see the
482 * next expected value).
483 *
484 * These expectations mean that we know that we have seen the
485 * transition from one expected value to another with a fairly
486 * high accuracy, and we didn't miss any events. We can thus
487 * use the TSC value at the transitions to calculate a pretty
488 * good value for the TSC frequency.
489 */
490static inline int pit_verify_msb(unsigned char val)
491{
492 /* Ignore LSB */
493 inb(0x42);
494 return inb(0x42) == val;
495}
496
497static inline int pit_expect_msb(unsigned char val, u64 *tscp, unsigned long *deltap)
498{
499 int count;
500 u64 tsc = 0, prev_tsc = 0;
501
502 for (count = 0; count < 50000; count++) {
503 if (!pit_verify_msb(val))
504 break;
505 prev_tsc = tsc;
506 tsc = get_cycles();
507 }
508 *deltap = get_cycles() - prev_tsc;
509 *tscp = tsc;
510
511 /*
512 * We require _some_ success, but the quality control
513 * will be based on the error terms on the TSC values.
514 */
515 return count > 5;
516}
517
518/*
519 * How many MSB values do we want to see? We aim for
520 * a maximum error rate of 500ppm (in practice the
521 * real error is much smaller), but refuse to spend
522 * more than 50ms on it.
523 */
524#define MAX_QUICK_PIT_MS 50
525#define MAX_QUICK_PIT_ITERATIONS (MAX_QUICK_PIT_MS * PIT_TICK_RATE / 1000 / 256)
526
527static unsigned long quick_pit_calibrate(void)
528{
529 int i;
530 u64 tsc, delta;
531 unsigned long d1, d2;
532
533 if (!has_legacy_pic())
534 return 0;
535
536 /* Set the Gate high, disable speaker */
537 outb((inb(0x61) & ~0x02) | 0x01, 0x61);
538
539 /*
540 * Counter 2, mode 0 (one-shot), binary count
541 *
542 * NOTE! Mode 2 decrements by two (and then the
543 * output is flipped each time, giving the same
544 * final output frequency as a decrement-by-one),
545 * so mode 0 is much better when looking at the
546 * individual counts.
547 */
548 outb(0xb0, 0x43);
549
550 /* Start at 0xffff */
551 outb(0xff, 0x42);
552 outb(0xff, 0x42);
553
554 /*
555 * The PIT starts counting at the next edge, so we
556 * need to delay for a microsecond. The easiest way
557 * to do that is to just read back the 16-bit counter
558 * once from the PIT.
559 */
560 pit_verify_msb(0);
561
562 if (pit_expect_msb(0xff, &tsc, &d1)) {
563 for (i = 1; i <= MAX_QUICK_PIT_ITERATIONS; i++) {
564 if (!pit_expect_msb(0xff-i, &delta, &d2))
565 break;
566
567 delta -= tsc;
568
569 /*
570 * Extrapolate the error and fail fast if the error will
571 * never be below 500 ppm.
572 */
573 if (i == 1 &&
574 d1 + d2 >= (delta * MAX_QUICK_PIT_ITERATIONS) >> 11)
575 return 0;
576
577 /*
578 * Iterate until the error is less than 500 ppm
579 */
580 if (d1+d2 >= delta >> 11)
581 continue;
582
583 /*
584 * Check the PIT one more time to verify that
585 * all TSC reads were stable wrt the PIT.
586 *
587 * This also guarantees serialization of the
588 * last cycle read ('d2') in pit_expect_msb.
589 */
590 if (!pit_verify_msb(0xfe - i))
591 break;
592 goto success;
593 }
594 }
595 pr_info("Fast TSC calibration failed\n");
596 return 0;
597
598success:
599 /*
600 * Ok, if we get here, then we've seen the
601 * MSB of the PIT decrement 'i' times, and the
602 * error has shrunk to less than 500 ppm.
603 *
604 * As a result, we can depend on there not being
605 * any odd delays anywhere, and the TSC reads are
606 * reliable (within the error).
607 *
608 * kHz = ticks / time-in-seconds / 1000;
609 * kHz = (t2 - t1) / (I * 256 / PIT_TICK_RATE) / 1000
610 * kHz = ((t2 - t1) * PIT_TICK_RATE) / (I * 256 * 1000)
611 */
612 delta *= PIT_TICK_RATE;
613 do_div(delta, i*256*1000);
614 pr_info("Fast TSC calibration using PIT\n");
615 return delta;
616}
617
618/**
619 * native_calibrate_tsc
620 * Determine TSC frequency via CPUID, else return 0.
621 */
622unsigned long native_calibrate_tsc(void)
623{
624 unsigned int eax_denominator, ebx_numerator, ecx_hz, edx;
625 unsigned int crystal_khz;
626
627 if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL)
628 return 0;
629
630 if (boot_cpu_data.cpuid_level < 0x15)
631 return 0;
632
633 eax_denominator = ebx_numerator = ecx_hz = edx = 0;
634
635 /* CPUID 15H TSC/Crystal ratio, plus optionally Crystal Hz */
636 cpuid(0x15, &eax_denominator, &ebx_numerator, &ecx_hz, &edx);
637
638 if (ebx_numerator == 0 || eax_denominator == 0)
639 return 0;
640
641 crystal_khz = ecx_hz / 1000;
642
643 /*
644 * Denverton SoCs don't report crystal clock, and also don't support
645 * CPUID.0x16 for the calculation below, so hardcode the 25MHz crystal
646 * clock.
647 */
648 if (crystal_khz == 0 &&
649 boot_cpu_data.x86_model == INTEL_FAM6_ATOM_GOLDMONT_D)
650 crystal_khz = 25000;
651
652 /*
653 * TSC frequency reported directly by CPUID is a "hardware reported"
654 * frequency and is the most accurate one so far we have. This
655 * is considered a known frequency.
656 */
657 if (crystal_khz != 0)
658 setup_force_cpu_cap(X86_FEATURE_TSC_KNOWN_FREQ);
659
660 /*
661 * Some Intel SoCs like Skylake and Kabylake don't report the crystal
662 * clock, but we can easily calculate it to a high degree of accuracy
663 * by considering the crystal ratio and the CPU speed.
664 */
665 if (crystal_khz == 0 && boot_cpu_data.cpuid_level >= 0x16) {
666 unsigned int eax_base_mhz, ebx, ecx, edx;
667
668 cpuid(0x16, &eax_base_mhz, &ebx, &ecx, &edx);
669 crystal_khz = eax_base_mhz * 1000 *
670 eax_denominator / ebx_numerator;
671 }
672
673 if (crystal_khz == 0)
674 return 0;
675
676 /*
677 * For Atom SoCs TSC is the only reliable clocksource.
678 * Mark TSC reliable so no watchdog on it.
679 */
680 if (boot_cpu_data.x86_model == INTEL_FAM6_ATOM_GOLDMONT)
681 setup_force_cpu_cap(X86_FEATURE_TSC_RELIABLE);
682
683#ifdef CONFIG_X86_LOCAL_APIC
684 /*
685 * The local APIC appears to be fed by the core crystal clock
686 * (which sounds entirely sensible). We can set the global
687 * lapic_timer_period here to avoid having to calibrate the APIC
688 * timer later.
689 */
690 lapic_timer_period = crystal_khz * 1000 / HZ;
691#endif
692
693 return crystal_khz * ebx_numerator / eax_denominator;
694}
695
696static unsigned long cpu_khz_from_cpuid(void)
697{
698 unsigned int eax_base_mhz, ebx_max_mhz, ecx_bus_mhz, edx;
699
700 if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL)
701 return 0;
702
703 if (boot_cpu_data.cpuid_level < 0x16)
704 return 0;
705
706 eax_base_mhz = ebx_max_mhz = ecx_bus_mhz = edx = 0;
707
708 cpuid(0x16, &eax_base_mhz, &ebx_max_mhz, &ecx_bus_mhz, &edx);
709
710 return eax_base_mhz * 1000;
711}
712
713/*
714 * calibrate cpu using pit, hpet, and ptimer methods. They are available
715 * later in boot after acpi is initialized.
716 */
717static unsigned long pit_hpet_ptimer_calibrate_cpu(void)
718{
719 u64 tsc1, tsc2, delta, ref1, ref2;
720 unsigned long tsc_pit_min = ULONG_MAX, tsc_ref_min = ULONG_MAX;
721 unsigned long flags, latch, ms;
722 int hpet = is_hpet_enabled(), i, loopmin;
723
724 /*
725 * Run 5 calibration loops to get the lowest frequency value
726 * (the best estimate). We use two different calibration modes
727 * here:
728 *
729 * 1) PIT loop. We set the PIT Channel 2 to oneshot mode and
730 * load a timeout of 50ms. We read the time right after we
731 * started the timer and wait until the PIT count down reaches
732 * zero. In each wait loop iteration we read the TSC and check
733 * the delta to the previous read. We keep track of the min
734 * and max values of that delta. The delta is mostly defined
735 * by the IO time of the PIT access, so we can detect when
736 * any disturbance happened between the two reads. If the
737 * maximum time is significantly larger than the minimum time,
738 * then we discard the result and have another try.
739 *
740 * 2) Reference counter. If available we use the HPET or the
741 * PMTIMER as a reference to check the sanity of that value.
742 * We use separate TSC readouts and check inside of the
743 * reference read for any possible disturbance. We discard
744 * disturbed values here as well. We do that around the PIT
745 * calibration delay loop as we have to wait for a certain
746 * amount of time anyway.
747 */
748
749 /* Preset PIT loop values */
750 latch = CAL_LATCH;
751 ms = CAL_MS;
752 loopmin = CAL_PIT_LOOPS;
753
754 for (i = 0; i < 3; i++) {
755 unsigned long tsc_pit_khz;
756
757 /*
758 * Read the start value and the reference count of
759 * hpet/pmtimer when available. Then do the PIT
760 * calibration, which will take at least 50ms, and
761 * read the end value.
762 */
763 local_irq_save(flags);
764 tsc1 = tsc_read_refs(&ref1, hpet);
765 tsc_pit_khz = pit_calibrate_tsc(latch, ms, loopmin);
766 tsc2 = tsc_read_refs(&ref2, hpet);
767 local_irq_restore(flags);
768
769 /* Pick the lowest PIT TSC calibration so far */
770 tsc_pit_min = min(tsc_pit_min, tsc_pit_khz);
771
772 /* hpet or pmtimer available ? */
773 if (ref1 == ref2)
774 continue;
775
776 /* Check, whether the sampling was disturbed */
777 if (tsc1 == ULLONG_MAX || tsc2 == ULLONG_MAX)
778 continue;
779
780 tsc2 = (tsc2 - tsc1) * 1000000LL;
781 if (hpet)
782 tsc2 = calc_hpet_ref(tsc2, ref1, ref2);
783 else
784 tsc2 = calc_pmtimer_ref(tsc2, ref1, ref2);
785
786 tsc_ref_min = min(tsc_ref_min, (unsigned long) tsc2);
787
788 /* Check the reference deviation */
789 delta = ((u64) tsc_pit_min) * 100;
790 do_div(delta, tsc_ref_min);
791
792 /*
793 * If both calibration results are inside a 10% window
794 * then we can be sure, that the calibration
795 * succeeded. We break out of the loop right away. We
796 * use the reference value, as it is more precise.
797 */
798 if (delta >= 90 && delta <= 110) {
799 pr_info("PIT calibration matches %s. %d loops\n",
800 hpet ? "HPET" : "PMTIMER", i + 1);
801 return tsc_ref_min;
802 }
803
804 /*
805 * Check whether PIT failed more than once. This
806 * happens in virtualized environments. We need to
807 * give the virtual PC a slightly longer timeframe for
808 * the HPET/PMTIMER to make the result precise.
809 */
810 if (i == 1 && tsc_pit_min == ULONG_MAX) {
811 latch = CAL2_LATCH;
812 ms = CAL2_MS;
813 loopmin = CAL2_PIT_LOOPS;
814 }
815 }
816
817 /*
818 * Now check the results.
819 */
820 if (tsc_pit_min == ULONG_MAX) {
821 /* PIT gave no useful value */
822 pr_warn("Unable to calibrate against PIT\n");
823
824 /* We don't have an alternative source, disable TSC */
825 if (!hpet && !ref1 && !ref2) {
826 pr_notice("No reference (HPET/PMTIMER) available\n");
827 return 0;
828 }
829
830 /* The alternative source failed as well, disable TSC */
831 if (tsc_ref_min == ULONG_MAX) {
832 pr_warn("HPET/PMTIMER calibration failed\n");
833 return 0;
834 }
835
836 /* Use the alternative source */
837 pr_info("using %s reference calibration\n",
838 hpet ? "HPET" : "PMTIMER");
839
840 return tsc_ref_min;
841 }
842
843 /* We don't have an alternative source, use the PIT calibration value */
844 if (!hpet && !ref1 && !ref2) {
845 pr_info("Using PIT calibration value\n");
846 return tsc_pit_min;
847 }
848
849 /* The alternative source failed, use the PIT calibration value */
850 if (tsc_ref_min == ULONG_MAX) {
851 pr_warn("HPET/PMTIMER calibration failed. Using PIT calibration.\n");
852 return tsc_pit_min;
853 }
854
855 /*
856 * The calibration values differ too much. In doubt, we use
857 * the PIT value as we know that there are PMTIMERs around
858 * running at double speed. At least we let the user know:
859 */
860 pr_warn("PIT calibration deviates from %s: %lu %lu\n",
861 hpet ? "HPET" : "PMTIMER", tsc_pit_min, tsc_ref_min);
862 pr_info("Using PIT calibration value\n");
863 return tsc_pit_min;
864}
865
866/**
867 * native_calibrate_cpu_early - can calibrate the cpu early in boot
868 */
869unsigned long native_calibrate_cpu_early(void)
870{
871 unsigned long flags, fast_calibrate = cpu_khz_from_cpuid();
872
873 if (!fast_calibrate)
874 fast_calibrate = cpu_khz_from_msr();
875 if (!fast_calibrate) {
876 local_irq_save(flags);
877 fast_calibrate = quick_pit_calibrate();
878 local_irq_restore(flags);
879 }
880 return fast_calibrate;
881}
882
883
884/**
885 * native_calibrate_cpu - calibrate the cpu
886 */
887static unsigned long native_calibrate_cpu(void)
888{
889 unsigned long tsc_freq = native_calibrate_cpu_early();
890
891 if (!tsc_freq)
892 tsc_freq = pit_hpet_ptimer_calibrate_cpu();
893
894 return tsc_freq;
895}
896
897void recalibrate_cpu_khz(void)
898{
899#ifndef CONFIG_SMP
900 unsigned long cpu_khz_old = cpu_khz;
901
902 if (!boot_cpu_has(X86_FEATURE_TSC))
903 return;
904
905 cpu_khz = x86_platform.calibrate_cpu();
906 tsc_khz = x86_platform.calibrate_tsc();
907 if (tsc_khz == 0)
908 tsc_khz = cpu_khz;
909 else if (abs(cpu_khz - tsc_khz) * 10 > tsc_khz)
910 cpu_khz = tsc_khz;
911 cpu_data(0).loops_per_jiffy = cpufreq_scale(cpu_data(0).loops_per_jiffy,
912 cpu_khz_old, cpu_khz);
913#endif
914}
915
916EXPORT_SYMBOL(recalibrate_cpu_khz);
917
918
919static unsigned long long cyc2ns_suspend;
920
921void tsc_save_sched_clock_state(void)
922{
923 if (!sched_clock_stable())
924 return;
925
926 cyc2ns_suspend = sched_clock();
927}
928
929/*
930 * Even on processors with invariant TSC, TSC gets reset in some the
931 * ACPI system sleep states. And in some systems BIOS seem to reinit TSC to
932 * arbitrary value (still sync'd across cpu's) during resume from such sleep
933 * states. To cope up with this, recompute the cyc2ns_offset for each cpu so
934 * that sched_clock() continues from the point where it was left off during
935 * suspend.
936 */
937void tsc_restore_sched_clock_state(void)
938{
939 unsigned long long offset;
940 unsigned long flags;
941 int cpu;
942
943 if (!sched_clock_stable())
944 return;
945
946 local_irq_save(flags);
947
948 /*
949 * We're coming out of suspend, there's no concurrency yet; don't
950 * bother being nice about the RCU stuff, just write to both
951 * data fields.
952 */
953
954 this_cpu_write(cyc2ns.data[0].cyc2ns_offset, 0);
955 this_cpu_write(cyc2ns.data[1].cyc2ns_offset, 0);
956
957 offset = cyc2ns_suspend - sched_clock();
958
959 for_each_possible_cpu(cpu) {
960 per_cpu(cyc2ns.data[0].cyc2ns_offset, cpu) = offset;
961 per_cpu(cyc2ns.data[1].cyc2ns_offset, cpu) = offset;
962 }
963
964 local_irq_restore(flags);
965}
966
967#ifdef CONFIG_CPU_FREQ
968/*
969 * Frequency scaling support. Adjust the TSC based timer when the CPU frequency
970 * changes.
971 *
972 * NOTE: On SMP the situation is not fixable in general, so simply mark the TSC
973 * as unstable and give up in those cases.
974 *
975 * Should fix up last_tsc too. Currently gettimeofday in the
976 * first tick after the change will be slightly wrong.
977 */
978
979static unsigned int ref_freq;
980static unsigned long loops_per_jiffy_ref;
981static unsigned long tsc_khz_ref;
982
983static int time_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
984 void *data)
985{
986 struct cpufreq_freqs *freq = data;
987
988 if (num_online_cpus() > 1) {
989 mark_tsc_unstable("cpufreq changes on SMP");
990 return 0;
991 }
992
993 if (!ref_freq) {
994 ref_freq = freq->old;
995 loops_per_jiffy_ref = boot_cpu_data.loops_per_jiffy;
996 tsc_khz_ref = tsc_khz;
997 }
998
999 if ((val == CPUFREQ_PRECHANGE && freq->old < freq->new) ||
1000 (val == CPUFREQ_POSTCHANGE && freq->old > freq->new)) {
1001 boot_cpu_data.loops_per_jiffy =
1002 cpufreq_scale(loops_per_jiffy_ref, ref_freq, freq->new);
1003
1004 tsc_khz = cpufreq_scale(tsc_khz_ref, ref_freq, freq->new);
1005 if (!(freq->flags & CPUFREQ_CONST_LOOPS))
1006 mark_tsc_unstable("cpufreq changes");
1007
1008 set_cyc2ns_scale(tsc_khz, freq->policy->cpu, rdtsc());
1009 }
1010
1011 return 0;
1012}
1013
1014static struct notifier_block time_cpufreq_notifier_block = {
1015 .notifier_call = time_cpufreq_notifier
1016};
1017
1018static int __init cpufreq_register_tsc_scaling(void)
1019{
1020 if (!boot_cpu_has(X86_FEATURE_TSC))
1021 return 0;
1022 if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC))
1023 return 0;
1024 cpufreq_register_notifier(&time_cpufreq_notifier_block,
1025 CPUFREQ_TRANSITION_NOTIFIER);
1026 return 0;
1027}
1028
1029core_initcall(cpufreq_register_tsc_scaling);
1030
1031#endif /* CONFIG_CPU_FREQ */
1032
1033#define ART_CPUID_LEAF (0x15)
1034#define ART_MIN_DENOMINATOR (1)
1035
1036
1037/*
1038 * If ART is present detect the numerator:denominator to convert to TSC
1039 */
1040static void __init detect_art(void)
1041{
1042 unsigned int unused[2];
1043
1044 if (boot_cpu_data.cpuid_level < ART_CPUID_LEAF)
1045 return;
1046
1047 /*
1048 * Don't enable ART in a VM, non-stop TSC and TSC_ADJUST required,
1049 * and the TSC counter resets must not occur asynchronously.
1050 */
1051 if (boot_cpu_has(X86_FEATURE_HYPERVISOR) ||
1052 !boot_cpu_has(X86_FEATURE_NONSTOP_TSC) ||
1053 !boot_cpu_has(X86_FEATURE_TSC_ADJUST) ||
1054 tsc_async_resets)
1055 return;
1056
1057 cpuid(ART_CPUID_LEAF, &art_to_tsc_denominator,
1058 &art_to_tsc_numerator, unused, unused+1);
1059
1060 if (art_to_tsc_denominator < ART_MIN_DENOMINATOR)
1061 return;
1062
1063 rdmsrl(MSR_IA32_TSC_ADJUST, art_to_tsc_offset);
1064
1065 /* Make this sticky over multiple CPU init calls */
1066 setup_force_cpu_cap(X86_FEATURE_ART);
1067}
1068
1069
1070/* clocksource code */
1071
1072static void tsc_resume(struct clocksource *cs)
1073{
1074 tsc_verify_tsc_adjust(true);
1075}
1076
1077/*
1078 * We used to compare the TSC to the cycle_last value in the clocksource
1079 * structure to avoid a nasty time-warp. This can be observed in a
1080 * very small window right after one CPU updated cycle_last under
1081 * xtime/vsyscall_gtod lock and the other CPU reads a TSC value which
1082 * is smaller than the cycle_last reference value due to a TSC which
1083 * is slightly behind. This delta is nowhere else observable, but in
1084 * that case it results in a forward time jump in the range of hours
1085 * due to the unsigned delta calculation of the time keeping core
1086 * code, which is necessary to support wrapping clocksources like pm
1087 * timer.
1088 *
1089 * This sanity check is now done in the core timekeeping code.
1090 * checking the result of read_tsc() - cycle_last for being negative.
1091 * That works because CLOCKSOURCE_MASK(64) does not mask out any bit.
1092 */
1093static u64 read_tsc(struct clocksource *cs)
1094{
1095 return (u64)rdtsc_ordered();
1096}
1097
1098static void tsc_cs_mark_unstable(struct clocksource *cs)
1099{
1100 if (tsc_unstable)
1101 return;
1102
1103 tsc_unstable = 1;
1104 if (using_native_sched_clock())
1105 clear_sched_clock_stable();
1106 disable_sched_clock_irqtime();
1107 pr_info("Marking TSC unstable due to clocksource watchdog\n");
1108}
1109
1110static void tsc_cs_tick_stable(struct clocksource *cs)
1111{
1112 if (tsc_unstable)
1113 return;
1114
1115 if (using_native_sched_clock())
1116 sched_clock_tick_stable();
1117}
1118
1119static int tsc_cs_enable(struct clocksource *cs)
1120{
1121 vclocks_set_used(VDSO_CLOCKMODE_TSC);
1122 return 0;
1123}
1124
1125/*
1126 * .mask MUST be CLOCKSOURCE_MASK(64). See comment above read_tsc()
1127 */
1128static struct clocksource clocksource_tsc_early = {
1129 .name = "tsc-early",
1130 .rating = 299,
1131 .uncertainty_margin = 32 * NSEC_PER_MSEC,
1132 .read = read_tsc,
1133 .mask = CLOCKSOURCE_MASK(64),
1134 .flags = CLOCK_SOURCE_IS_CONTINUOUS |
1135 CLOCK_SOURCE_MUST_VERIFY,
1136 .vdso_clock_mode = VDSO_CLOCKMODE_TSC,
1137 .enable = tsc_cs_enable,
1138 .resume = tsc_resume,
1139 .mark_unstable = tsc_cs_mark_unstable,
1140 .tick_stable = tsc_cs_tick_stable,
1141 .list = LIST_HEAD_INIT(clocksource_tsc_early.list),
1142};
1143
1144/*
1145 * Must mark VALID_FOR_HRES early such that when we unregister tsc_early
1146 * this one will immediately take over. We will only register if TSC has
1147 * been found good.
1148 */
1149static struct clocksource clocksource_tsc = {
1150 .name = "tsc",
1151 .rating = 300,
1152 .read = read_tsc,
1153 .mask = CLOCKSOURCE_MASK(64),
1154 .flags = CLOCK_SOURCE_IS_CONTINUOUS |
1155 CLOCK_SOURCE_VALID_FOR_HRES |
1156 CLOCK_SOURCE_MUST_VERIFY |
1157 CLOCK_SOURCE_VERIFY_PERCPU,
1158 .vdso_clock_mode = VDSO_CLOCKMODE_TSC,
1159 .enable = tsc_cs_enable,
1160 .resume = tsc_resume,
1161 .mark_unstable = tsc_cs_mark_unstable,
1162 .tick_stable = tsc_cs_tick_stable,
1163 .list = LIST_HEAD_INIT(clocksource_tsc.list),
1164};
1165
1166void mark_tsc_unstable(char *reason)
1167{
1168 if (tsc_unstable)
1169 return;
1170
1171 tsc_unstable = 1;
1172 if (using_native_sched_clock())
1173 clear_sched_clock_stable();
1174 disable_sched_clock_irqtime();
1175 pr_info("Marking TSC unstable due to %s\n", reason);
1176
1177 clocksource_mark_unstable(&clocksource_tsc_early);
1178 clocksource_mark_unstable(&clocksource_tsc);
1179}
1180
1181EXPORT_SYMBOL_GPL(mark_tsc_unstable);
1182
1183static void __init tsc_disable_clocksource_watchdog(void)
1184{
1185 clocksource_tsc_early.flags &= ~CLOCK_SOURCE_MUST_VERIFY;
1186 clocksource_tsc.flags &= ~CLOCK_SOURCE_MUST_VERIFY;
1187}
1188
1189static void __init check_system_tsc_reliable(void)
1190{
1191#if defined(CONFIG_MGEODEGX1) || defined(CONFIG_MGEODE_LX) || defined(CONFIG_X86_GENERIC)
1192 if (is_geode_lx()) {
1193 /* RTSC counts during suspend */
1194#define RTSC_SUSP 0x100
1195 unsigned long res_low, res_high;
1196
1197 rdmsr_safe(MSR_GEODE_BUSCONT_CONF0, &res_low, &res_high);
1198 /* Geode_LX - the OLPC CPU has a very reliable TSC */
1199 if (res_low & RTSC_SUSP)
1200 tsc_clocksource_reliable = 1;
1201 }
1202#endif
1203 if (boot_cpu_has(X86_FEATURE_TSC_RELIABLE))
1204 tsc_clocksource_reliable = 1;
1205
1206 /*
1207 * Disable the clocksource watchdog when the system has:
1208 * - TSC running at constant frequency
1209 * - TSC which does not stop in C-States
1210 * - the TSC_ADJUST register which allows to detect even minimal
1211 * modifications
1212 * - not more than two sockets. As the number of sockets cannot be
1213 * evaluated at the early boot stage where this has to be
1214 * invoked, check the number of online memory nodes as a
1215 * fallback solution which is an reasonable estimate.
1216 */
1217 if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC) &&
1218 boot_cpu_has(X86_FEATURE_NONSTOP_TSC) &&
1219 boot_cpu_has(X86_FEATURE_TSC_ADJUST) &&
1220 nr_online_nodes <= 2)
1221 tsc_disable_clocksource_watchdog();
1222}
1223
1224/*
1225 * Make an educated guess if the TSC is trustworthy and synchronized
1226 * over all CPUs.
1227 */
1228int unsynchronized_tsc(void)
1229{
1230 if (!boot_cpu_has(X86_FEATURE_TSC) || tsc_unstable)
1231 return 1;
1232
1233#ifdef CONFIG_SMP
1234 if (apic_is_clustered_box())
1235 return 1;
1236#endif
1237
1238 if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC))
1239 return 0;
1240
1241 if (tsc_clocksource_reliable)
1242 return 0;
1243 /*
1244 * Intel systems are normally all synchronized.
1245 * Exceptions must mark TSC as unstable:
1246 */
1247 if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL) {
1248 /* assume multi socket systems are not synchronized: */
1249 if (num_possible_cpus() > 1)
1250 return 1;
1251 }
1252
1253 return 0;
1254}
1255
1256/*
1257 * Convert ART to TSC given numerator/denominator found in detect_art()
1258 */
1259struct system_counterval_t convert_art_to_tsc(u64 art)
1260{
1261 u64 tmp, res, rem;
1262
1263 rem = do_div(art, art_to_tsc_denominator);
1264
1265 res = art * art_to_tsc_numerator;
1266 tmp = rem * art_to_tsc_numerator;
1267
1268 do_div(tmp, art_to_tsc_denominator);
1269 res += tmp + art_to_tsc_offset;
1270
1271 return (struct system_counterval_t) {.cs = art_related_clocksource,
1272 .cycles = res};
1273}
1274EXPORT_SYMBOL(convert_art_to_tsc);
1275
1276/**
1277 * convert_art_ns_to_tsc() - Convert ART in nanoseconds to TSC.
1278 * @art_ns: ART (Always Running Timer) in unit of nanoseconds
1279 *
1280 * PTM requires all timestamps to be in units of nanoseconds. When user
1281 * software requests a cross-timestamp, this function converts system timestamp
1282 * to TSC.
1283 *
1284 * This is valid when CPU feature flag X86_FEATURE_TSC_KNOWN_FREQ is set
1285 * indicating the tsc_khz is derived from CPUID[15H]. Drivers should check
1286 * that this flag is set before conversion to TSC is attempted.
1287 *
1288 * Return:
1289 * struct system_counterval_t - system counter value with the pointer to the
1290 * corresponding clocksource
1291 * @cycles: System counter value
1292 * @cs: Clocksource corresponding to system counter value. Used
1293 * by timekeeping code to verify comparability of two cycle
1294 * values.
1295 */
1296
1297struct system_counterval_t convert_art_ns_to_tsc(u64 art_ns)
1298{
1299 u64 tmp, res, rem;
1300
1301 rem = do_div(art_ns, USEC_PER_SEC);
1302
1303 res = art_ns * tsc_khz;
1304 tmp = rem * tsc_khz;
1305
1306 do_div(tmp, USEC_PER_SEC);
1307 res += tmp;
1308
1309 return (struct system_counterval_t) { .cs = art_related_clocksource,
1310 .cycles = res};
1311}
1312EXPORT_SYMBOL(convert_art_ns_to_tsc);
1313
1314
1315static void tsc_refine_calibration_work(struct work_struct *work);
1316static DECLARE_DELAYED_WORK(tsc_irqwork, tsc_refine_calibration_work);
1317/**
1318 * tsc_refine_calibration_work - Further refine tsc freq calibration
1319 * @work - ignored.
1320 *
1321 * This functions uses delayed work over a period of a
1322 * second to further refine the TSC freq value. Since this is
1323 * timer based, instead of loop based, we don't block the boot
1324 * process while this longer calibration is done.
1325 *
1326 * If there are any calibration anomalies (too many SMIs, etc),
1327 * or the refined calibration is off by 1% of the fast early
1328 * calibration, we throw out the new calibration and use the
1329 * early calibration.
1330 */
1331static void tsc_refine_calibration_work(struct work_struct *work)
1332{
1333 static u64 tsc_start = ULLONG_MAX, ref_start;
1334 static int hpet;
1335 u64 tsc_stop, ref_stop, delta;
1336 unsigned long freq;
1337 int cpu;
1338
1339 /* Don't bother refining TSC on unstable systems */
1340 if (tsc_unstable)
1341 goto unreg;
1342
1343 /*
1344 * Since the work is started early in boot, we may be
1345 * delayed the first time we expire. So set the workqueue
1346 * again once we know timers are working.
1347 */
1348 if (tsc_start == ULLONG_MAX) {
1349restart:
1350 /*
1351 * Only set hpet once, to avoid mixing hardware
1352 * if the hpet becomes enabled later.
1353 */
1354 hpet = is_hpet_enabled();
1355 tsc_start = tsc_read_refs(&ref_start, hpet);
1356 schedule_delayed_work(&tsc_irqwork, HZ);
1357 return;
1358 }
1359
1360 tsc_stop = tsc_read_refs(&ref_stop, hpet);
1361
1362 /* hpet or pmtimer available ? */
1363 if (ref_start == ref_stop)
1364 goto out;
1365
1366 /* Check, whether the sampling was disturbed */
1367 if (tsc_stop == ULLONG_MAX)
1368 goto restart;
1369
1370 delta = tsc_stop - tsc_start;
1371 delta *= 1000000LL;
1372 if (hpet)
1373 freq = calc_hpet_ref(delta, ref_start, ref_stop);
1374 else
1375 freq = calc_pmtimer_ref(delta, ref_start, ref_stop);
1376
1377 /* Make sure we're within 1% */
1378 if (abs(tsc_khz - freq) > tsc_khz/100)
1379 goto out;
1380
1381 tsc_khz = freq;
1382 pr_info("Refined TSC clocksource calibration: %lu.%03lu MHz\n",
1383 (unsigned long)tsc_khz / 1000,
1384 (unsigned long)tsc_khz % 1000);
1385
1386 /* Inform the TSC deadline clockevent devices about the recalibration */
1387 lapic_update_tsc_freq();
1388
1389 /* Update the sched_clock() rate to match the clocksource one */
1390 for_each_possible_cpu(cpu)
1391 set_cyc2ns_scale(tsc_khz, cpu, tsc_stop);
1392
1393out:
1394 if (tsc_unstable)
1395 goto unreg;
1396
1397 if (boot_cpu_has(X86_FEATURE_ART))
1398 art_related_clocksource = &clocksource_tsc;
1399 clocksource_register_khz(&clocksource_tsc, tsc_khz);
1400unreg:
1401 clocksource_unregister(&clocksource_tsc_early);
1402}
1403
1404
1405static int __init init_tsc_clocksource(void)
1406{
1407 if (!boot_cpu_has(X86_FEATURE_TSC) || !tsc_khz)
1408 return 0;
1409
1410 if (tsc_unstable)
1411 goto unreg;
1412
1413 if (boot_cpu_has(X86_FEATURE_NONSTOP_TSC_S3))
1414 clocksource_tsc.flags |= CLOCK_SOURCE_SUSPEND_NONSTOP;
1415
1416 /*
1417 * When TSC frequency is known (retrieved via MSR or CPUID), we skip
1418 * the refined calibration and directly register it as a clocksource.
1419 */
1420 if (boot_cpu_has(X86_FEATURE_TSC_KNOWN_FREQ)) {
1421 if (boot_cpu_has(X86_FEATURE_ART))
1422 art_related_clocksource = &clocksource_tsc;
1423 clocksource_register_khz(&clocksource_tsc, tsc_khz);
1424unreg:
1425 clocksource_unregister(&clocksource_tsc_early);
1426 return 0;
1427 }
1428
1429 schedule_delayed_work(&tsc_irqwork, 0);
1430 return 0;
1431}
1432/*
1433 * We use device_initcall here, to ensure we run after the hpet
1434 * is fully initialized, which may occur at fs_initcall time.
1435 */
1436device_initcall(init_tsc_clocksource);
1437
1438static bool __init determine_cpu_tsc_frequencies(bool early)
1439{
1440 /* Make sure that cpu and tsc are not already calibrated */
1441 WARN_ON(cpu_khz || tsc_khz);
1442
1443 if (early) {
1444 cpu_khz = x86_platform.calibrate_cpu();
1445 if (tsc_early_khz)
1446 tsc_khz = tsc_early_khz;
1447 else
1448 tsc_khz = x86_platform.calibrate_tsc();
1449 } else {
1450 /* We should not be here with non-native cpu calibration */
1451 WARN_ON(x86_platform.calibrate_cpu != native_calibrate_cpu);
1452 cpu_khz = pit_hpet_ptimer_calibrate_cpu();
1453 }
1454
1455 /*
1456 * Trust non-zero tsc_khz as authoritative,
1457 * and use it to sanity check cpu_khz,
1458 * which will be off if system timer is off.
1459 */
1460 if (tsc_khz == 0)
1461 tsc_khz = cpu_khz;
1462 else if (abs(cpu_khz - tsc_khz) * 10 > tsc_khz)
1463 cpu_khz = tsc_khz;
1464
1465 if (tsc_khz == 0)
1466 return false;
1467
1468 pr_info("Detected %lu.%03lu MHz processor\n",
1469 (unsigned long)cpu_khz / KHZ,
1470 (unsigned long)cpu_khz % KHZ);
1471
1472 if (cpu_khz != tsc_khz) {
1473 pr_info("Detected %lu.%03lu MHz TSC",
1474 (unsigned long)tsc_khz / KHZ,
1475 (unsigned long)tsc_khz % KHZ);
1476 }
1477 return true;
1478}
1479
1480static unsigned long __init get_loops_per_jiffy(void)
1481{
1482 u64 lpj = (u64)tsc_khz * KHZ;
1483
1484 do_div(lpj, HZ);
1485 return lpj;
1486}
1487
1488static void __init tsc_enable_sched_clock(void)
1489{
1490 loops_per_jiffy = get_loops_per_jiffy();
1491 use_tsc_delay();
1492
1493 /* Sanitize TSC ADJUST before cyc2ns gets initialized */
1494 tsc_store_and_check_tsc_adjust(true);
1495 cyc2ns_init_boot_cpu();
1496 static_branch_enable(&__use_tsc);
1497}
1498
1499void __init tsc_early_init(void)
1500{
1501 if (!boot_cpu_has(X86_FEATURE_TSC))
1502 return;
1503 /* Don't change UV TSC multi-chassis synchronization */
1504 if (is_early_uv_system())
1505 return;
1506 if (!determine_cpu_tsc_frequencies(true))
1507 return;
1508 tsc_enable_sched_clock();
1509}
1510
1511void __init tsc_init(void)
1512{
1513 /*
1514 * native_calibrate_cpu_early can only calibrate using methods that are
1515 * available early in boot.
1516 */
1517 if (x86_platform.calibrate_cpu == native_calibrate_cpu_early)
1518 x86_platform.calibrate_cpu = native_calibrate_cpu;
1519
1520 if (!boot_cpu_has(X86_FEATURE_TSC)) {
1521 setup_clear_cpu_cap(X86_FEATURE_TSC_DEADLINE_TIMER);
1522 return;
1523 }
1524
1525 if (!tsc_khz) {
1526 /* We failed to determine frequencies earlier, try again */
1527 if (!determine_cpu_tsc_frequencies(false)) {
1528 mark_tsc_unstable("could not calculate TSC khz");
1529 setup_clear_cpu_cap(X86_FEATURE_TSC_DEADLINE_TIMER);
1530 return;
1531 }
1532 tsc_enable_sched_clock();
1533 }
1534
1535 cyc2ns_init_secondary_cpus();
1536
1537 if (!no_sched_irq_time)
1538 enable_sched_clock_irqtime();
1539
1540 lpj_fine = get_loops_per_jiffy();
1541
1542 check_system_tsc_reliable();
1543
1544 if (unsynchronized_tsc()) {
1545 mark_tsc_unstable("TSCs unsynchronized");
1546 return;
1547 }
1548
1549 if (tsc_clocksource_reliable || no_tsc_watchdog)
1550 tsc_disable_clocksource_watchdog();
1551
1552 clocksource_register_khz(&clocksource_tsc_early, tsc_khz);
1553 detect_art();
1554}
1555
1556#ifdef CONFIG_SMP
1557/*
1558 * If we have a constant TSC and are using the TSC for the delay loop,
1559 * we can skip clock calibration if another cpu in the same socket has already
1560 * been calibrated. This assumes that CONSTANT_TSC applies to all
1561 * cpus in the socket - this should be a safe assumption.
1562 */
1563unsigned long calibrate_delay_is_known(void)
1564{
1565 int sibling, cpu = smp_processor_id();
1566 int constant_tsc = cpu_has(&cpu_data(cpu), X86_FEATURE_CONSTANT_TSC);
1567 const struct cpumask *mask = topology_core_cpumask(cpu);
1568
1569 if (!constant_tsc || !mask)
1570 return 0;
1571
1572 sibling = cpumask_any_but(mask, cpu);
1573 if (sibling < nr_cpu_ids)
1574 return cpu_data(sibling).loops_per_jiffy;
1575 return 0;
1576}
1577#endif