1/* Framework for finding and configuring PHYs.
   2 * Also contains generic PHY driver
   3 *
   4 * Author: Andy Fleming
   5 *
   6 * Copyright (c) 2004 Freescale Semiconductor, Inc.
   7 *
   8 * This program is free software; you can redistribute  it and/or modify it
   9 * under  the terms of  the GNU General  Public License as published by the
  10 * Free Software Foundation;  either version 2 of the  License, or (at your
  11 * option) any later version.
  12 *
  13 */
  14
  15#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  16
  17#include <linux/kernel.h>
  18#include <linux/string.h>
  19#include <linux/errno.h>
  20#include <linux/unistd.h>
  21#include <linux/slab.h>
  22#include <linux/interrupt.h>
  23#include <linux/init.h>
  24#include <linux/delay.h>
  25#include <linux/netdevice.h>
  26#include <linux/etherdevice.h>
  27#include <linux/skbuff.h>
 
 
 
 
 
 
  28#include <linux/mm.h>
  29#include <linux/module.h>
  30#include <linux/mii.h>
  31#include <linux/ethtool.h>
  32#include <linux/phy.h>
  33#include <linux/phy_led_triggers.h>
  34#include <linux/mdio.h>
  35#include <linux/io.h>
 
 
 
  36#include <linux/uaccess.h>
  37#include <linux/of.h>
  38
  39#include <asm/irq.h>
  40
  41MODULE_DESCRIPTION("PHY library");
  42MODULE_AUTHOR("Andy Fleming");
  43MODULE_LICENSE("GPL");
  44
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  45void phy_device_free(struct phy_device *phydev)
  46{
  47	put_device(&phydev->mdio.dev);
  48}
  49EXPORT_SYMBOL(phy_device_free);
  50
  51static void phy_mdio_device_free(struct mdio_device *mdiodev)
  52{
  53	struct phy_device *phydev;
  54
  55	phydev = container_of(mdiodev, struct phy_device, mdio);
  56	phy_device_free(phydev);
  57}
  58
  59static void phy_device_release(struct device *dev)
  60{
  61	kfree(to_phy_device(dev));
  62}
  63
  64static void phy_mdio_device_remove(struct mdio_device *mdiodev)
  65{
  66	struct phy_device *phydev;
  67
  68	phydev = container_of(mdiodev, struct phy_device, mdio);
  69	phy_device_remove(phydev);
  70}
  71
  72static struct phy_driver genphy_driver;
  73extern struct phy_driver genphy_10g_driver;
  74
  75static LIST_HEAD(phy_fixup_list);
  76static DEFINE_MUTEX(phy_fixup_lock);
  77
  78#ifdef CONFIG_PM
  79static bool mdio_bus_phy_may_suspend(struct phy_device *phydev)
  80{
  81	struct device_driver *drv = phydev->mdio.dev.driver;
  82	struct phy_driver *phydrv = to_phy_driver(drv);
  83	struct net_device *netdev = phydev->attached_dev;
  84
  85	if (!drv || !phydrv->suspend)
  86		return false;
  87
  88	/* PHY not attached? May suspend if the PHY has not already been
  89	 * suspended as part of a prior call to phy_disconnect() ->
  90	 * phy_detach() -> phy_suspend() because the parent netdev might be the
  91	 * MDIO bus driver and clock gated at this point.
  92	 */
  93	if (!netdev)
  94		return !phydev->suspended;
  95
  96	/* Don't suspend PHY if the attached netdev parent may wakeup.
 
 
 
 
 
  97	 * The parent may point to a PCI device, as in tg3 driver.
  98	 */
  99	if (netdev->dev.parent && device_may_wakeup(netdev->dev.parent))
 100		return false;
 101
 102	/* Also don't suspend PHY if the netdev itself may wakeup. This
 103	 * is the case for devices w/o underlaying pwr. mgmt. aware bus,
 104	 * e.g. SoC devices.
 105	 */
 106	if (device_may_wakeup(&netdev->dev))
 107		return false;
 108
 109	return true;
 
 110}
 111
 112static int mdio_bus_phy_suspend(struct device *dev)
 113{
 114	struct phy_device *phydev = to_phy_device(dev);
 115
 116	/* We must stop the state machine manually, otherwise it stops out of
 117	 * control, possibly with the phydev->lock held. Upon resume, netdev
 118	 * may call phy routines that try to grab the same lock, and that may
 119	 * lead to a deadlock.
 120	 */
 121	if (phydev->attached_dev && phydev->adjust_link)
 122		phy_stop_machine(phydev);
 123
 124	if (!mdio_bus_phy_may_suspend(phydev))
 125		return 0;
 126
 
 
 127	return phy_suspend(phydev);
 128}
 129
 130static int mdio_bus_phy_resume(struct device *dev)
 131{
 132	struct phy_device *phydev = to_phy_device(dev);
 133	int ret;
 134
 135	if (!mdio_bus_phy_may_suspend(phydev))
 136		goto no_resume;
 137
 
 
 138	ret = phy_resume(phydev);
 139	if (ret < 0)
 140		return ret;
 141
 142no_resume:
 143	if (phydev->attached_dev && phydev->adjust_link)
 144		phy_start_machine(phydev);
 145
 146	return 0;
 147}
 148
 149static int mdio_bus_phy_restore(struct device *dev)
 150{
 151	struct phy_device *phydev = to_phy_device(dev);
 152	struct net_device *netdev = phydev->attached_dev;
 153	int ret;
 154
 155	if (!netdev)
 156		return 0;
 157
 158	ret = phy_init_hw(phydev);
 159	if (ret < 0)
 160		return ret;
 161
 162	/* The PHY needs to renegotiate. */
 163	phydev->link = 0;
 164	phydev->state = PHY_UP;
 165
 166	phy_start_machine(phydev);
 167
 168	return 0;
 169}
 170
 171static const struct dev_pm_ops mdio_bus_phy_pm_ops = {
 172	.suspend = mdio_bus_phy_suspend,
 173	.resume = mdio_bus_phy_resume,
 174	.freeze = mdio_bus_phy_suspend,
 175	.thaw = mdio_bus_phy_resume,
 176	.restore = mdio_bus_phy_restore,
 177};
 178
 179#define MDIO_BUS_PHY_PM_OPS (&mdio_bus_phy_pm_ops)
 180
 181#else
 182
 183#define MDIO_BUS_PHY_PM_OPS NULL
 184
 185#endif /* CONFIG_PM */
 186
 187/**
 188 * phy_register_fixup - creates a new phy_fixup and adds it to the list
 189 * @bus_id: A string which matches phydev->mdio.dev.bus_id (or PHY_ANY_ID)
 190 * @phy_uid: Used to match against phydev->phy_id (the UID of the PHY)
 191 *	It can also be PHY_ANY_UID
 192 * @phy_uid_mask: Applied to phydev->phy_id and fixup->phy_uid before
 193 *	comparison
 194 * @run: The actual code to be run when a matching PHY is found
 195 */
 196int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask,
 197		       int (*run)(struct phy_device *))
 198{
 199	struct phy_fixup *fixup = kzalloc(sizeof(*fixup), GFP_KERNEL);
 200
 201	if (!fixup)
 202		return -ENOMEM;
 203
 204	strlcpy(fixup->bus_id, bus_id, sizeof(fixup->bus_id));
 205	fixup->phy_uid = phy_uid;
 206	fixup->phy_uid_mask = phy_uid_mask;
 207	fixup->run = run;
 208
 209	mutex_lock(&phy_fixup_lock);
 210	list_add_tail(&fixup->list, &phy_fixup_list);
 211	mutex_unlock(&phy_fixup_lock);
 212
 213	return 0;
 214}
 215EXPORT_SYMBOL(phy_register_fixup);
 216
 217/* Registers a fixup to be run on any PHY with the UID in phy_uid */
 218int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask,
 219			       int (*run)(struct phy_device *))
 220{
 221	return phy_register_fixup(PHY_ANY_ID, phy_uid, phy_uid_mask, run);
 222}
 223EXPORT_SYMBOL(phy_register_fixup_for_uid);
 224
 225/* Registers a fixup to be run on the PHY with id string bus_id */
 226int phy_register_fixup_for_id(const char *bus_id,
 227			      int (*run)(struct phy_device *))
 228{
 229	return phy_register_fixup(bus_id, PHY_ANY_UID, 0xffffffff, run);
 230}
 231EXPORT_SYMBOL(phy_register_fixup_for_id);
 232
 233/**
 234 * phy_unregister_fixup - remove a phy_fixup from the list
 235 * @bus_id: A string matches fixup->bus_id (or PHY_ANY_ID) in phy_fixup_list
 236 * @phy_uid: A phy id matches fixup->phy_id (or PHY_ANY_UID) in phy_fixup_list
 237 * @phy_uid_mask: Applied to phy_uid and fixup->phy_uid before comparison
 238 */
 239int phy_unregister_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask)
 240{
 241	struct list_head *pos, *n;
 242	struct phy_fixup *fixup;
 243	int ret;
 244
 245	ret = -ENODEV;
 246
 247	mutex_lock(&phy_fixup_lock);
 248	list_for_each_safe(pos, n, &phy_fixup_list) {
 249		fixup = list_entry(pos, struct phy_fixup, list);
 250
 251		if ((!strcmp(fixup->bus_id, bus_id)) &&
 252		    ((fixup->phy_uid & phy_uid_mask) ==
 253		     (phy_uid & phy_uid_mask))) {
 254			list_del(&fixup->list);
 255			kfree(fixup);
 256			ret = 0;
 257			break;
 258		}
 259	}
 260	mutex_unlock(&phy_fixup_lock);
 261
 262	return ret;
 263}
 264EXPORT_SYMBOL(phy_unregister_fixup);
 265
 266/* Unregisters a fixup of any PHY with the UID in phy_uid */
 267int phy_unregister_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask)
 268{
 269	return phy_unregister_fixup(PHY_ANY_ID, phy_uid, phy_uid_mask);
 270}
 271EXPORT_SYMBOL(phy_unregister_fixup_for_uid);
 272
 273/* Unregisters a fixup of the PHY with id string bus_id */
 274int phy_unregister_fixup_for_id(const char *bus_id)
 275{
 276	return phy_unregister_fixup(bus_id, PHY_ANY_UID, 0xffffffff);
 277}
 278EXPORT_SYMBOL(phy_unregister_fixup_for_id);
 279
 280/* Returns 1 if fixup matches phydev in bus_id and phy_uid.
 281 * Fixups can be set to match any in one or more fields.
 282 */
 283static int phy_needs_fixup(struct phy_device *phydev, struct phy_fixup *fixup)
 284{
 285	if (strcmp(fixup->bus_id, phydev_name(phydev)) != 0)
 286		if (strcmp(fixup->bus_id, PHY_ANY_ID) != 0)
 287			return 0;
 288
 289	if ((fixup->phy_uid & fixup->phy_uid_mask) !=
 290	    (phydev->phy_id & fixup->phy_uid_mask))
 291		if (fixup->phy_uid != PHY_ANY_UID)
 292			return 0;
 293
 294	return 1;
 295}
 296
 297/* Runs any matching fixups for this phydev */
 298static int phy_scan_fixups(struct phy_device *phydev)
 299{
 300	struct phy_fixup *fixup;
 301
 302	mutex_lock(&phy_fixup_lock);
 303	list_for_each_entry(fixup, &phy_fixup_list, list) {
 304		if (phy_needs_fixup(phydev, fixup)) {
 305			int err = fixup->run(phydev);
 306
 307			if (err < 0) {
 308				mutex_unlock(&phy_fixup_lock);
 309				return err;
 310			}
 311			phydev->has_fixups = true;
 312		}
 313	}
 314	mutex_unlock(&phy_fixup_lock);
 315
 316	return 0;
 317}
 318
 319static int phy_bus_match(struct device *dev, struct device_driver *drv)
 320{
 321	struct phy_device *phydev = to_phy_device(dev);
 322	struct phy_driver *phydrv = to_phy_driver(drv);
 323	const int num_ids = ARRAY_SIZE(phydev->c45_ids.device_ids);
 324	int i;
 325
 326	if (!(phydrv->mdiodrv.flags & MDIO_DEVICE_IS_PHY))
 327		return 0;
 328
 329	if (phydrv->match_phy_device)
 330		return phydrv->match_phy_device(phydev);
 331
 332	if (phydev->is_c45) {
 333		for (i = 1; i < num_ids; i++) {
 334			if (!(phydev->c45_ids.devices_in_package & (1 << i)))
 335				continue;
 336
 337			if ((phydrv->phy_id & phydrv->phy_id_mask) ==
 338			    (phydev->c45_ids.device_ids[i] &
 339			     phydrv->phy_id_mask))
 340				return 1;
 341		}
 342		return 0;
 343	} else {
 344		return (phydrv->phy_id & phydrv->phy_id_mask) ==
 345			(phydev->phy_id & phydrv->phy_id_mask);
 346	}
 347}
 348
 349struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id,
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 350				     bool is_c45,
 351				     struct phy_c45_device_ids *c45_ids)
 352{
 353	struct phy_device *dev;
 354	struct mdio_device *mdiodev;
 
 355
 356	/* We allocate the device, and initialize the default values */
 357	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
 358	if (!dev)
 359		return ERR_PTR(-ENOMEM);
 360
 361	mdiodev = &dev->mdio;
 362	mdiodev->dev.release = phy_device_release;
 363	mdiodev->dev.parent = &bus->dev;
 364	mdiodev->dev.bus = &mdio_bus_type;
 
 365	mdiodev->bus = bus;
 366	mdiodev->pm_ops = MDIO_BUS_PHY_PM_OPS;
 367	mdiodev->bus_match = phy_bus_match;
 368	mdiodev->addr = addr;
 369	mdiodev->flags = MDIO_DEVICE_FLAG_PHY;
 370	mdiodev->device_free = phy_mdio_device_free;
 371	mdiodev->device_remove = phy_mdio_device_remove;
 372
 373	dev->speed = 0;
 374	dev->duplex = -1;
 375	dev->pause = 0;
 376	dev->asym_pause = 0;
 377	dev->link = 0;
 378	dev->interface = PHY_INTERFACE_MODE_GMII;
 379
 380	dev->autoneg = AUTONEG_ENABLE;
 381
 382	dev->is_c45 = is_c45;
 383	dev->phy_id = phy_id;
 384	if (c45_ids)
 385		dev->c45_ids = *c45_ids;
 386	dev->irq = bus->irq[addr];
 
 387	dev_set_name(&mdiodev->dev, PHY_ID_FMT, bus->id, addr);
 
 388
 389	dev->state = PHY_DOWN;
 390
 391	mutex_init(&dev->lock);
 392	INIT_DELAYED_WORK(&dev->state_queue, phy_state_machine);
 393	INIT_WORK(&dev->phy_queue, phy_change_work);
 394
 395	/* Request the appropriate module unconditionally; don't
 396	 * bother trying to do so only if it isn't already loaded,
 397	 * because that gets complicated. A hotplug event would have
 398	 * done an unconditional modprobe anyway.
 399	 * We don't do normal hotplug because it won't work for MDIO
 400	 * -- because it relies on the device staying around for long
 401	 * enough for the driver to get loaded. With MDIO, the NIC
 402	 * driver will get bored and give up as soon as it finds that
 403	 * there's no driver _already_ loaded.
 404	 */
 405	request_module(MDIO_MODULE_PREFIX MDIO_ID_FMT, MDIO_ID_ARGS(phy_id));
 
 
 406
 407	device_initialize(&mdiodev->dev);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 408
 409	return dev;
 410}
 411EXPORT_SYMBOL(phy_device_create);
 412
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 413/* get_phy_c45_devs_in_pkg - reads a MMD's devices in package registers.
 414 * @bus: the target MII bus
 415 * @addr: PHY address on the MII bus
 416 * @dev_addr: MMD address in the PHY.
 417 * @devices_in_package: where to store the devices in package information.
 418 *
 419 * Description: reads devices in package registers of a MMD at @dev_addr
 420 * from PHY at @addr on @bus.
 421 *
 422 * Returns: 0 on success, -EIO on failure.
 423 */
 424static int get_phy_c45_devs_in_pkg(struct mii_bus *bus, int addr, int dev_addr,
 425				   u32 *devices_in_package)
 426{
 427	int phy_reg, reg_addr;
 428
 429	reg_addr = MII_ADDR_C45 | dev_addr << 16 | MDIO_DEVS2;
 430	phy_reg = mdiobus_read(bus, addr, reg_addr);
 431	if (phy_reg < 0)
 432		return -EIO;
 433	*devices_in_package = (phy_reg & 0xffff) << 16;
 434
 435	reg_addr = MII_ADDR_C45 | dev_addr << 16 | MDIO_DEVS1;
 436	phy_reg = mdiobus_read(bus, addr, reg_addr);
 437	if (phy_reg < 0)
 438		return -EIO;
 439	*devices_in_package |= (phy_reg & 0xffff);
 440
 441	return 0;
 442}
 443
 444/**
 445 * get_phy_c45_ids - reads the specified addr for its 802.3-c45 IDs.
 446 * @bus: the target MII bus
 447 * @addr: PHY address on the MII bus
 448 * @phy_id: where to store the ID retrieved.
 449 * @c45_ids: where to store the c45 ID information.
 450 *
 451 *   If the PHY devices-in-package appears to be valid, it and the
 452 *   corresponding identifiers are stored in @c45_ids, zero is stored
 453 *   in @phy_id.  Otherwise 0xffffffff is stored in @phy_id.  Returns
 454 *   zero on success.
 455 *
 
 
 456 */
 457static int get_phy_c45_ids(struct mii_bus *bus, int addr, u32 *phy_id,
 458			   struct phy_c45_device_ids *c45_ids) {
 459	int phy_reg;
 460	int i, reg_addr;
 461	const int num_ids = ARRAY_SIZE(c45_ids->device_ids);
 462	u32 *devs = &c45_ids->devices_in_package;
 
 463
 464	/* Find first non-zero Devices In package. Device zero is reserved
 465	 * for 802.3 c45 complied PHYs, so don't probe it at first.
 466	 */
 467	for (i = 1; i < num_ids && *devs == 0; i++) {
 468		phy_reg = get_phy_c45_devs_in_pkg(bus, addr, i, devs);
 469		if (phy_reg < 0)
 470			return -EIO;
 471
 472		if ((*devs & 0x1fffffff) == 0x1fffffff) {
 473			/*  If mostly Fs, there is no device there,
 474			 *  then let's continue to probe more, as some
 475			 *  10G PHYs have zero Devices In package,
 476			 *  e.g. Cortina CS4315/CS4340 PHY.
 477			 */
 478			phy_reg = get_phy_c45_devs_in_pkg(bus, addr, 0, devs);
 479			if (phy_reg < 0)
 480				return -EIO;
 481			/* no device there, let's get out of here */
 482			if ((*devs & 0x1fffffff) == 0x1fffffff) {
 483				*phy_id = 0xffffffff;
 484				return 0;
 485			} else {
 486				break;
 487			}
 488		}
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 489	}
 490
 491	/* Now probe Device Identifiers for each device present. */
 492	for (i = 1; i < num_ids; i++) {
 493		if (!(c45_ids->devices_in_package & (1 << i)))
 494			continue;
 495
 496		reg_addr = MII_ADDR_C45 | i << 16 | MII_PHYSID1;
 497		phy_reg = mdiobus_read(bus, addr, reg_addr);
 
 
 
 
 
 
 
 
 
 
 
 
 498		if (phy_reg < 0)
 499			return -EIO;
 500		c45_ids->device_ids[i] = (phy_reg & 0xffff) << 16;
 501
 502		reg_addr = MII_ADDR_C45 | i << 16 | MII_PHYSID2;
 503		phy_reg = mdiobus_read(bus, addr, reg_addr);
 504		if (phy_reg < 0)
 505			return -EIO;
 506		c45_ids->device_ids[i] |= (phy_reg & 0xffff);
 507	}
 508	*phy_id = 0;
 
 
 
 
 509	return 0;
 510}
 511
 512/**
 513 * get_phy_id - reads the specified addr for its ID.
 514 * @bus: the target MII bus
 515 * @addr: PHY address on the MII bus
 516 * @phy_id: where to store the ID retrieved.
 517 * @is_c45: If true the PHY uses the 802.3 clause 45 protocol
 518 * @c45_ids: where to store the c45 ID information.
 519 *
 520 * Description: In the case of a 802.3-c22 PHY, reads the ID registers
 521 *   of the PHY at @addr on the @bus, stores it in @phy_id and returns
 522 *   zero on success.
 523 *
 524 *   In the case of a 802.3-c45 PHY, get_phy_c45_ids() is invoked, and
 525 *   its return value is in turn returned.
 526 *
 
 
 
 
 527 */
 528static int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id,
 529		      bool is_c45, struct phy_c45_device_ids *c45_ids)
 530{
 531	int phy_reg;
 532
 533	if (is_c45)
 534		return get_phy_c45_ids(bus, addr, phy_id, c45_ids);
 535
 536	/* Grab the bits from PHYIR1, and put them in the upper half */
 537	phy_reg = mdiobus_read(bus, addr, MII_PHYSID1);
 538	if (phy_reg < 0) {
 539		/* if there is no device, return without an error so scanning
 540		 * the bus works properly
 541		 */
 542		if (phy_reg == -EIO || phy_reg == -ENODEV) {
 543			*phy_id = 0xffffffff;
 544			return 0;
 545		}
 546
 547		return -EIO;
 548	}
 549
 550	*phy_id = (phy_reg & 0xffff) << 16;
 551
 552	/* Grab the bits from PHYIR2, and put them in the lower half */
 553	phy_reg = mdiobus_read(bus, addr, MII_PHYSID2);
 554	if (phy_reg < 0)
 555		return -EIO;
 
 
 
 
 556
 557	*phy_id |= (phy_reg & 0xffff);
 
 
 558
 559	return 0;
 560}
 561
 562/**
 563 * get_phy_device - reads the specified PHY device and returns its @phy_device
 564 *		    struct
 565 * @bus: the target MII bus
 566 * @addr: PHY address on the MII bus
 567 * @is_c45: If true the PHY uses the 802.3 clause 45 protocol
 568 *
 569 * Description: Reads the ID registers of the PHY at @addr on the
 570 *   @bus, then allocates and returns the phy_device to represent it.
 
 
 
 
 
 
 
 
 
 571 */
 572struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45)
 573{
 574	struct phy_c45_device_ids c45_ids = {0};
 575	u32 phy_id = 0;
 576	int r;
 577
 578	r = get_phy_id(bus, addr, &phy_id, is_c45, &c45_ids);
 
 
 
 
 
 
 
 
 579	if (r)
 580		return ERR_PTR(r);
 581
 582	/* If the phy_id is mostly Fs, there is no device there */
 583	if ((phy_id & 0x1fffffff) == 0x1fffffff)
 584		return ERR_PTR(-ENODEV);
 585
 586	return phy_device_create(bus, addr, phy_id, is_c45, &c45_ids);
 587}
 588EXPORT_SYMBOL(get_phy_device);
 589
 590static ssize_t
 591phy_id_show(struct device *dev, struct device_attribute *attr, char *buf)
 592{
 593	struct phy_device *phydev = to_phy_device(dev);
 594
 595	return sprintf(buf, "0x%.8lx\n", (unsigned long)phydev->phy_id);
 596}
 597static DEVICE_ATTR_RO(phy_id);
 598
 599static ssize_t
 600phy_interface_show(struct device *dev, struct device_attribute *attr, char *buf)
 601{
 602	struct phy_device *phydev = to_phy_device(dev);
 603	const char *mode = NULL;
 604
 605	if (phy_is_internal(phydev))
 606		mode = "internal";
 607	else
 608		mode = phy_modes(phydev->interface);
 609
 610	return sprintf(buf, "%s\n", mode);
 611}
 612static DEVICE_ATTR_RO(phy_interface);
 613
 614static ssize_t
 615phy_has_fixups_show(struct device *dev, struct device_attribute *attr,
 616		    char *buf)
 617{
 618	struct phy_device *phydev = to_phy_device(dev);
 619
 620	return sprintf(buf, "%d\n", phydev->has_fixups);
 621}
 622static DEVICE_ATTR_RO(phy_has_fixups);
 623
 624static struct attribute *phy_dev_attrs[] = {
 625	&dev_attr_phy_id.attr,
 626	&dev_attr_phy_interface.attr,
 627	&dev_attr_phy_has_fixups.attr,
 628	NULL,
 629};
 630ATTRIBUTE_GROUPS(phy_dev);
 631
 632/**
 633 * phy_device_register - Register the phy device on the MDIO bus
 634 * @phydev: phy_device structure to be added to the MDIO bus
 635 */
 636int phy_device_register(struct phy_device *phydev)
 637{
 638	int err;
 639
 640	err = mdiobus_register_device(&phydev->mdio);
 641	if (err)
 642		return err;
 643
 644	/* Deassert the reset signal */
 645	phy_device_reset(phydev, 0);
 646
 647	/* Run all of the fixups for this PHY */
 648	err = phy_scan_fixups(phydev);
 649	if (err) {
 650		pr_err("PHY %d failed to initialize\n", phydev->mdio.addr);
 651		goto out;
 652	}
 653
 654	phydev->mdio.dev.groups = phy_dev_groups;
 655
 656	err = device_add(&phydev->mdio.dev);
 657	if (err) {
 658		pr_err("PHY %d failed to add\n", phydev->mdio.addr);
 659		goto out;
 660	}
 661
 662	return 0;
 663
 664 out:
 665	/* Assert the reset signal */
 666	phy_device_reset(phydev, 1);
 667
 668	mdiobus_unregister_device(&phydev->mdio);
 669	return err;
 670}
 671EXPORT_SYMBOL(phy_device_register);
 672
 673/**
 674 * phy_device_remove - Remove a previously registered phy device from the MDIO bus
 675 * @phydev: phy_device structure to remove
 676 *
 677 * This doesn't free the phy_device itself, it merely reverses the effects
 678 * of phy_device_register(). Use phy_device_free() to free the device
 679 * after calling this function.
 680 */
 681void phy_device_remove(struct phy_device *phydev)
 682{
 
 
 
 683	device_del(&phydev->mdio.dev);
 684
 685	/* Assert the reset signal */
 686	phy_device_reset(phydev, 1);
 687
 688	mdiobus_unregister_device(&phydev->mdio);
 689}
 690EXPORT_SYMBOL(phy_device_remove);
 691
 692/**
 693 * phy_find_first - finds the first PHY device on the bus
 694 * @bus: the target MII bus
 695 */
 696struct phy_device *phy_find_first(struct mii_bus *bus)
 697{
 698	struct phy_device *phydev;
 699	int addr;
 700
 701	for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
 702		phydev = mdiobus_get_phy(bus, addr);
 703		if (phydev)
 704			return phydev;
 705	}
 706	return NULL;
 707}
 708EXPORT_SYMBOL(phy_find_first);
 709
 710static void phy_link_change(struct phy_device *phydev, bool up, bool do_carrier)
 711{
 712	struct net_device *netdev = phydev->attached_dev;
 713
 714	if (do_carrier) {
 715		if (up)
 716			netif_carrier_on(netdev);
 717		else
 718			netif_carrier_off(netdev);
 719	}
 720	phydev->adjust_link(netdev);
 
 
 721}
 722
 723/**
 724 * phy_prepare_link - prepares the PHY layer to monitor link status
 725 * @phydev: target phy_device struct
 726 * @handler: callback function for link status change notifications
 727 *
 728 * Description: Tells the PHY infrastructure to handle the
 729 *   gory details on monitoring link status (whether through
 730 *   polling or an interrupt), and to call back to the
 731 *   connected device driver when the link status changes.
 732 *   If you want to monitor your own link state, don't call
 733 *   this function.
 734 */
 735static void phy_prepare_link(struct phy_device *phydev,
 736			     void (*handler)(struct net_device *))
 737{
 738	phydev->adjust_link = handler;
 739}
 740
 741/**
 742 * phy_connect_direct - connect an ethernet device to a specific phy_device
 743 * @dev: the network device to connect
 744 * @phydev: the pointer to the phy device
 745 * @handler: callback function for state change notifications
 746 * @interface: PHY device's interface
 747 */
 748int phy_connect_direct(struct net_device *dev, struct phy_device *phydev,
 749		       void (*handler)(struct net_device *),
 750		       phy_interface_t interface)
 751{
 752	int rc;
 753
 
 
 
 754	rc = phy_attach_direct(dev, phydev, phydev->dev_flags, interface);
 755	if (rc)
 756		return rc;
 757
 758	phy_prepare_link(phydev, handler);
 759	phy_start_machine(phydev);
 760	if (phydev->irq > 0)
 761		phy_start_interrupts(phydev);
 762
 763	return 0;
 764}
 765EXPORT_SYMBOL(phy_connect_direct);
 766
 767/**
 768 * phy_connect - connect an ethernet device to a PHY device
 769 * @dev: the network device to connect
 770 * @bus_id: the id string of the PHY device to connect
 771 * @handler: callback function for state change notifications
 772 * @interface: PHY device's interface
 773 *
 774 * Description: Convenience function for connecting ethernet
 775 *   devices to PHY devices.  The default behavior is for
 776 *   the PHY infrastructure to handle everything, and only notify
 777 *   the connected driver when the link status changes.  If you
 778 *   don't want, or can't use the provided functionality, you may
 779 *   choose to call only the subset of functions which provide
 780 *   the desired functionality.
 781 */
 782struct phy_device *phy_connect(struct net_device *dev, const char *bus_id,
 783			       void (*handler)(struct net_device *),
 784			       phy_interface_t interface)
 785{
 786	struct phy_device *phydev;
 787	struct device *d;
 788	int rc;
 789
 790	/* Search the list of PHY devices on the mdio bus for the
 791	 * PHY with the requested name
 792	 */
 793	d = bus_find_device_by_name(&mdio_bus_type, NULL, bus_id);
 794	if (!d) {
 795		pr_err("PHY %s not found\n", bus_id);
 796		return ERR_PTR(-ENODEV);
 797	}
 798	phydev = to_phy_device(d);
 799
 800	rc = phy_connect_direct(dev, phydev, handler, interface);
 801	put_device(d);
 802	if (rc)
 803		return ERR_PTR(rc);
 804
 805	return phydev;
 806}
 807EXPORT_SYMBOL(phy_connect);
 808
 809/**
 810 * phy_disconnect - disable interrupts, stop state machine, and detach a PHY
 811 *		    device
 812 * @phydev: target phy_device struct
 813 */
 814void phy_disconnect(struct phy_device *phydev)
 815{
 816	if (phydev->irq > 0)
 817		phy_stop_interrupts(phydev);
 818
 819	phy_stop_machine(phydev);
 
 820
 821	phydev->adjust_link = NULL;
 822
 823	phy_detach(phydev);
 824}
 825EXPORT_SYMBOL(phy_disconnect);
 826
 827/**
 828 * phy_poll_reset - Safely wait until a PHY reset has properly completed
 829 * @phydev: The PHY device to poll
 830 *
 831 * Description: According to IEEE 802.3, Section 2, Subsection 22.2.4.1.1, as
 832 *   published in 2008, a PHY reset may take up to 0.5 seconds.  The MII BMCR
 833 *   register must be polled until the BMCR_RESET bit clears.
 834 *
 835 *   Furthermore, any attempts to write to PHY registers may have no effect
 836 *   or even generate MDIO bus errors until this is complete.
 837 *
 838 *   Some PHYs (such as the Marvell 88E1111) don't entirely conform to the
 839 *   standard and do not fully reset after the BMCR_RESET bit is set, and may
 840 *   even *REQUIRE* a soft-reset to properly restart autonegotiation.  In an
 841 *   effort to support such broken PHYs, this function is separate from the
 842 *   standard phy_init_hw() which will zero all the other bits in the BMCR
 843 *   and reapply all driver-specific and board-specific fixups.
 844 */
 845static int phy_poll_reset(struct phy_device *phydev)
 846{
 847	/* Poll until the reset bit clears (50ms per retry == 0.6 sec) */
 848	unsigned int retries = 12;
 849	int ret;
 850
 851	do {
 852		msleep(50);
 853		ret = phy_read(phydev, MII_BMCR);
 854		if (ret < 0)
 855			return ret;
 856	} while (ret & BMCR_RESET && --retries);
 857	if (ret & BMCR_RESET)
 858		return -ETIMEDOUT;
 859
 
 
 
 
 860	/* Some chips (smsc911x) may still need up to another 1ms after the
 861	 * BMCR_RESET bit is cleared before they are usable.
 862	 */
 863	msleep(1);
 864	return 0;
 865}
 866
 867int phy_init_hw(struct phy_device *phydev)
 868{
 869	int ret = 0;
 870
 871	/* Deassert the reset signal */
 872	phy_device_reset(phydev, 0);
 873
 874	if (!phydev->drv || !phydev->drv->config_init)
 875		return 0;
 876
 877	if (phydev->drv->soft_reset)
 878		ret = phydev->drv->soft_reset(phydev);
 879	else
 880		ret = genphy_soft_reset(phydev);
 
 
 881
 882	if (ret < 0)
 883		return ret;
 884
 885	ret = phy_scan_fixups(phydev);
 886	if (ret < 0)
 887		return ret;
 888
 889	return phydev->drv->config_init(phydev);
 
 
 
 890}
 891EXPORT_SYMBOL(phy_init_hw);
 892
 893void phy_attached_info(struct phy_device *phydev)
 894{
 895	phy_attached_print(phydev, NULL);
 896}
 897EXPORT_SYMBOL(phy_attached_info);
 898
 899#define ATTACHED_FMT "attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%s)"
 900void phy_attached_print(struct phy_device *phydev, const char *fmt, ...)
 901{
 902	const char *drv_name = phydev->drv ? phydev->drv->name : "unbound";
 903	char *irq_str;
 904	char irq_num[8];
 905
 906	switch(phydev->irq) {
 907	case PHY_POLL:
 908		irq_str = "POLL";
 909		break;
 910	case PHY_IGNORE_INTERRUPT:
 911		irq_str = "IGNORE";
 912		break;
 913	default:
 914		snprintf(irq_num, sizeof(irq_num), "%d", phydev->irq);
 915		irq_str = irq_num;
 916		break;
 917	}
 918
 
 
 
 
 
 
 
 
 919
 920	if (!fmt) {
 921		dev_info(&phydev->mdio.dev, ATTACHED_FMT "\n",
 922			 drv_name, phydev_name(phydev),
 923			 irq_str);
 924	} else {
 925		va_list ap;
 926
 927		dev_info(&phydev->mdio.dev, ATTACHED_FMT,
 928			 drv_name, phydev_name(phydev),
 929			 irq_str);
 930
 931		va_start(ap, fmt);
 932		vprintk(fmt, ap);
 933		va_end(ap);
 934	}
 
 935}
 936EXPORT_SYMBOL(phy_attached_print);
 937
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 938/**
 939 * phy_attach_direct - attach a network device to a given PHY device pointer
 940 * @dev: network device to attach
 941 * @phydev: Pointer to phy_device to attach
 942 * @flags: PHY device's dev_flags
 943 * @interface: PHY device's interface
 944 *
 945 * Description: Called by drivers to attach to a particular PHY
 946 *     device. The phy_device is found, and properly hooked up
 947 *     to the phy_driver.  If no driver is attached, then a
 948 *     generic driver is used.  The phy_device is given a ptr to
 949 *     the attaching device, and given a callback for link status
 950 *     change.  The phy_device is returned to the attaching driver.
 951 *     This function takes a reference on the phy device.
 952 */
 953int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
 954		      u32 flags, phy_interface_t interface)
 955{
 956	struct module *ndev_owner = dev->dev.parent->driver->owner;
 957	struct mii_bus *bus = phydev->mdio.bus;
 958	struct device *d = &phydev->mdio.dev;
 
 959	bool using_genphy = false;
 960	int err;
 961
 962	/* For Ethernet device drivers that register their own MDIO bus, we
 963	 * will have bus->owner match ndev_mod, so we do not want to increment
 964	 * our own module->refcnt here, otherwise we would not be able to
 965	 * unload later on.
 966	 */
 
 
 967	if (ndev_owner != bus->owner && !try_module_get(bus->owner)) {
 968		dev_err(&dev->dev, "failed to get the bus module\n");
 969		return -EIO;
 970	}
 971
 972	get_device(d);
 973
 974	/* Assume that if there is no driver, that it doesn't
 975	 * exist, and we should use the genphy driver.
 976	 */
 977	if (!d->driver) {
 978		if (phydev->is_c45)
 979			d->driver = &genphy_10g_driver.mdiodrv.driver;
 980		else
 981			d->driver = &genphy_driver.mdiodrv.driver;
 982
 983		using_genphy = true;
 984	}
 985
 986	if (!try_module_get(d->driver->owner)) {
 987		dev_err(&dev->dev, "failed to get the device driver module\n");
 988		err = -EIO;
 989		goto error_put_device;
 990	}
 991
 992	if (using_genphy) {
 993		err = d->driver->probe(d);
 994		if (err >= 0)
 995			err = device_bind_driver(d);
 996
 997		if (err)
 998			goto error_module_put;
 999	}
1000
1001	if (phydev->attached_dev) {
1002		dev_err(&dev->dev, "PHY already attached\n");
1003		err = -EBUSY;
1004		goto error;
1005	}
1006
1007	phydev->phy_link_change = phy_link_change;
1008	phydev->attached_dev = dev;
1009	dev->phydev = phydev;
 
 
 
 
 
1010
1011	/* Some Ethernet drivers try to connect to a PHY device before
1012	 * calling register_netdevice() -> netdev_register_kobject() and
1013	 * does the dev->dev.kobj initialization. Here we only check for
1014	 * success which indicates that the network device kobject is
1015	 * ready. Once we do that we still need to keep track of whether
1016	 * links were successfully set up or not for phy_detach() to
1017	 * remove them accordingly.
1018	 */
1019	phydev->sysfs_links = false;
1020
1021	err = sysfs_create_link(&phydev->mdio.dev.kobj, &dev->dev.kobj,
1022				"attached_dev");
1023	if (!err) {
1024		err = sysfs_create_link_nowarn(&dev->dev.kobj,
1025					       &phydev->mdio.dev.kobj,
1026					       "phydev");
1027		if (err) {
1028			dev_err(&dev->dev, "could not add device link to %s err %d\n",
1029				kobject_name(&phydev->mdio.dev.kobj),
1030				err);
1031			/* non-fatal - some net drivers can use one netdevice
1032			 * with more then one phy
1033			 */
1034		}
1035
1036		phydev->sysfs_links = true;
 
 
 
 
1037	}
1038
1039	phydev->dev_flags = flags;
1040
1041	phydev->interface = interface;
1042
1043	phydev->state = PHY_READY;
1044
1045	/* Initial carrier state is off as the phy is about to be
1046	 * (re)initialized.
1047	 */
1048	netif_carrier_off(phydev->attached_dev);
 
1049
1050	/* Do initial configuration here, now that
1051	 * we have certain key parameters
1052	 * (dev_flags and interface)
1053	 */
1054	err = phy_init_hw(phydev);
1055	if (err)
1056		goto error;
1057
 
 
 
 
1058	phy_resume(phydev);
1059	phy_led_triggers_register(phydev);
1060
1061	return err;
1062
1063error:
1064	/* phy_detach() does all of the cleanup below */
1065	phy_detach(phydev);
1066	return err;
1067
1068error_module_put:
1069	module_put(d->driver->owner);
1070error_put_device:
1071	put_device(d);
1072	if (ndev_owner != bus->owner)
1073		module_put(bus->owner);
1074	return err;
1075}
1076EXPORT_SYMBOL(phy_attach_direct);
1077
1078/**
1079 * phy_attach - attach a network device to a particular PHY device
1080 * @dev: network device to attach
1081 * @bus_id: Bus ID of PHY device to attach
1082 * @interface: PHY device's interface
1083 *
1084 * Description: Same as phy_attach_direct() except that a PHY bus_id
1085 *     string is passed instead of a pointer to a struct phy_device.
1086 */
1087struct phy_device *phy_attach(struct net_device *dev, const char *bus_id,
1088			      phy_interface_t interface)
1089{
1090	struct bus_type *bus = &mdio_bus_type;
1091	struct phy_device *phydev;
1092	struct device *d;
1093	int rc;
1094
 
 
 
1095	/* Search the list of PHY devices on the mdio bus for the
1096	 * PHY with the requested name
1097	 */
1098	d = bus_find_device_by_name(bus, NULL, bus_id);
1099	if (!d) {
1100		pr_err("PHY %s not found\n", bus_id);
1101		return ERR_PTR(-ENODEV);
1102	}
1103	phydev = to_phy_device(d);
1104
1105	rc = phy_attach_direct(dev, phydev, phydev->dev_flags, interface);
1106	put_device(d);
1107	if (rc)
1108		return ERR_PTR(rc);
1109
1110	return phydev;
1111}
1112EXPORT_SYMBOL(phy_attach);
1113
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1114/**
1115 * phy_detach - detach a PHY device from its network device
1116 * @phydev: target phy_device struct
1117 *
1118 * This detaches the phy device from its network device and the phy
1119 * driver, and drops the reference count taken in phy_attach_direct().
1120 */
1121void phy_detach(struct phy_device *phydev)
1122{
1123	struct net_device *dev = phydev->attached_dev;
1124	struct module *ndev_owner = dev->dev.parent->driver->owner;
1125	struct mii_bus *bus;
1126
1127	if (phydev->sysfs_links) {
1128		sysfs_remove_link(&dev->dev.kobj, "phydev");
 
1129		sysfs_remove_link(&phydev->mdio.dev.kobj, "attached_dev");
1130	}
1131	phydev->attached_dev->phydev = NULL;
1132	phydev->attached_dev = NULL;
 
 
 
1133	phy_suspend(phydev);
 
 
 
 
1134	phydev->phylink = NULL;
1135
1136	phy_led_triggers_unregister(phydev);
1137
1138	module_put(phydev->mdio.dev.driver->owner);
 
1139
1140	/* If the device had no specific driver before (i.e. - it
1141	 * was using the generic driver), we unbind the device
1142	 * from the generic driver so that there's a chance a
1143	 * real driver could be loaded
1144	 */
1145	if (phydev->mdio.dev.driver == &genphy_10g_driver.mdiodrv.driver ||
1146	    phydev->mdio.dev.driver == &genphy_driver.mdiodrv.driver)
1147		device_release_driver(&phydev->mdio.dev);
1148
1149	/*
1150	 * The phydev might go away on the put_device() below, so avoid
1151	 * a use-after-free bug by reading the underlying bus first.
1152	 */
1153	bus = phydev->mdio.bus;
1154
1155	put_device(&phydev->mdio.dev);
 
 
1156	if (ndev_owner != bus->owner)
1157		module_put(bus->owner);
1158
1159	/* Assert the reset signal */
1160	phy_device_reset(phydev, 1);
1161}
1162EXPORT_SYMBOL(phy_detach);
1163
1164int phy_suspend(struct phy_device *phydev)
1165{
1166	struct phy_driver *phydrv = to_phy_driver(phydev->mdio.dev.driver);
1167	struct ethtool_wolinfo wol = { .cmd = ETHTOOL_GWOL };
1168	int ret = 0;
 
 
 
 
 
1169
1170	/* If the device has WOL enabled, we cannot suspend the PHY */
1171	phy_ethtool_get_wol(phydev, &wol);
1172	if (wol.wolopts)
1173		return -EBUSY;
1174
1175	if (phydev->drv && phydrv->suspend)
1176		ret = phydrv->suspend(phydev);
1177
1178	if (ret)
1179		return ret;
1180
1181	phydev->suspended = true;
 
 
1182
1183	return ret;
1184}
1185EXPORT_SYMBOL(phy_suspend);
1186
1187int __phy_resume(struct phy_device *phydev)
1188{
1189	struct phy_driver *phydrv = to_phy_driver(phydev->mdio.dev.driver);
1190	int ret = 0;
1191
1192	WARN_ON(!mutex_is_locked(&phydev->lock));
1193
1194	if (phydev->drv && phydrv->resume)
1195		ret = phydrv->resume(phydev);
1196
1197	if (ret)
1198		return ret;
1199
1200	phydev->suspended = false;
 
 
1201
1202	return ret;
1203}
1204EXPORT_SYMBOL(__phy_resume);
1205
1206int phy_resume(struct phy_device *phydev)
1207{
1208	int ret;
1209
1210	mutex_lock(&phydev->lock);
1211	ret = __phy_resume(phydev);
1212	mutex_unlock(&phydev->lock);
1213
1214	return ret;
1215}
1216EXPORT_SYMBOL(phy_resume);
1217
1218int phy_loopback(struct phy_device *phydev, bool enable)
1219{
1220	struct phy_driver *phydrv = to_phy_driver(phydev->mdio.dev.driver);
1221	int ret = 0;
1222
1223	mutex_lock(&phydev->lock);
1224
1225	if (enable && phydev->loopback_enabled) {
1226		ret = -EBUSY;
1227		goto out;
1228	}
1229
1230	if (!enable && !phydev->loopback_enabled) {
1231		ret = -EINVAL;
1232		goto out;
1233	}
1234
1235	if (phydev->drv && phydrv->set_loopback)
1236		ret = phydrv->set_loopback(phydev, enable);
1237	else
1238		ret = -EOPNOTSUPP;
1239
1240	if (ret)
1241		goto out;
1242
1243	phydev->loopback_enabled = enable;
1244
1245out:
1246	mutex_unlock(&phydev->lock);
1247	return ret;
1248}
1249EXPORT_SYMBOL(phy_loopback);
1250
1251/**
1252 * phy_reset_after_clk_enable - perform a PHY reset if needed
1253 * @phydev: target phy_device struct
1254 *
1255 * Description: Some PHYs are known to need a reset after their refclk was
1256 *   enabled. This function evaluates the flags and perform the reset if it's
1257 *   needed. Returns < 0 on error, 0 if the phy wasn't reset and 1 if the phy
1258 *   was reset.
1259 */
1260int phy_reset_after_clk_enable(struct phy_device *phydev)
1261{
1262	if (!phydev || !phydev->drv)
1263		return -ENODEV;
1264
1265	if (phydev->drv->flags & PHY_RST_AFTER_CLK_EN) {
1266		phy_device_reset(phydev, 1);
1267		phy_device_reset(phydev, 0);
1268		return 1;
1269	}
1270
1271	return 0;
1272}
1273EXPORT_SYMBOL(phy_reset_after_clk_enable);
1274
1275/* Generic PHY support and helper functions */
1276
1277/**
1278 * genphy_config_advert - sanitize and advertise auto-negotiation parameters
1279 * @phydev: target phy_device struct
1280 *
1281 * Description: Writes MII_ADVERTISE with the appropriate values,
1282 *   after sanitizing the values to make sure we only advertise
1283 *   what is supported.  Returns < 0 on error, 0 if the PHY's advertisement
1284 *   hasn't changed, and > 0 if it has changed.
1285 */
1286static int genphy_config_advert(struct phy_device *phydev)
1287{
1288	u32 advertise;
1289	int oldadv, adv, bmsr;
1290	int err, changed = 0;
1291
1292	/* Only allow advertising what this PHY supports */
1293	phydev->advertising &= phydev->supported;
1294	advertise = phydev->advertising;
1295
1296	/* Setup standard advertisement */
1297	adv = phy_read(phydev, MII_ADVERTISE);
1298	if (adv < 0)
1299		return adv;
1300
1301	oldadv = adv;
1302	adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP |
1303		 ADVERTISE_PAUSE_ASYM);
1304	adv |= ethtool_adv_to_mii_adv_t(advertise);
1305
1306	if (adv != oldadv) {
1307		err = phy_write(phydev, MII_ADVERTISE, adv);
1308
1309		if (err < 0)
1310			return err;
 
 
 
 
 
 
1311		changed = 1;
1312	}
1313
1314	bmsr = phy_read(phydev, MII_BMSR);
1315	if (bmsr < 0)
1316		return bmsr;
1317
1318	/* Per 802.3-2008, Section 22.2.4.2.16 Extended status all
1319	 * 1000Mbits/sec capable PHYs shall have the BMSR_ESTATEN bit set to a
1320	 * logical 1.
1321	 */
1322	if (!(bmsr & BMSR_ESTATEN))
1323		return changed;
1324
1325	/* Configure gigabit if it's supported */
1326	adv = phy_read(phydev, MII_CTRL1000);
1327	if (adv < 0)
1328		return adv;
1329
1330	oldadv = adv;
1331	adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
1332
1333	if (phydev->supported & (SUPPORTED_1000baseT_Half |
1334				 SUPPORTED_1000baseT_Full)) {
1335		adv |= ethtool_adv_to_mii_ctrl1000_t(advertise);
1336	}
1337
1338	if (adv != oldadv)
1339		changed = 1;
1340
1341	err = phy_write(phydev, MII_CTRL1000, adv);
 
 
1342	if (err < 0)
1343		return err;
 
 
1344
1345	return changed;
1346}
1347
1348/**
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1349 * genphy_config_eee_advert - disable unwanted eee mode advertisement
1350 * @phydev: target phy_device struct
1351 *
1352 * Description: Writes MDIO_AN_EEE_ADV after disabling unsupported energy
1353 *   efficent ethernet modes. Returns 0 if the PHY's advertisement hasn't
1354 *   changed, and 1 if it has changed.
1355 */
1356static int genphy_config_eee_advert(struct phy_device *phydev)
1357{
1358	int broken = phydev->eee_broken_modes;
1359	int old_adv, adv;
1360
1361	/* Nothing to disable */
1362	if (!broken)
1363		return 0;
1364
1365	/* If the following call fails, we assume that EEE is not
1366	 * supported by the phy. If we read 0, EEE is not advertised
1367	 * In both case, we don't need to continue
1368	 */
1369	adv = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV);
1370	if (adv <= 0)
1371		return 0;
1372
1373	old_adv = adv;
1374	adv &= ~broken;
1375
1376	/* Advertising remains unchanged with the broken mask */
1377	if (old_adv == adv)
1378		return 0;
1379
1380	phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, adv);
1381
1382	return 1;
1383}
 
1384
1385/**
1386 * genphy_setup_forced - configures/forces speed/duplex from @phydev
1387 * @phydev: target phy_device struct
1388 *
1389 * Description: Configures MII_BMCR to force speed/duplex
1390 *   to the values in phydev. Assumes that the values are valid.
1391 *   Please see phy_sanitize_settings().
1392 */
1393int genphy_setup_forced(struct phy_device *phydev)
1394{
1395	u16 ctl = 0;
1396
1397	phydev->pause = 0;
1398	phydev->asym_pause = 0;
1399
1400	if (SPEED_1000 == phydev->speed)
1401		ctl |= BMCR_SPEED1000;
1402	else if (SPEED_100 == phydev->speed)
1403		ctl |= BMCR_SPEED100;
1404
1405	if (DUPLEX_FULL == phydev->duplex)
1406		ctl |= BMCR_FULLDPLX;
1407
1408	return phy_modify(phydev, MII_BMCR,
1409			  ~(BMCR_LOOPBACK | BMCR_ISOLATE | BMCR_PDOWN), ctl);
1410}
1411EXPORT_SYMBOL(genphy_setup_forced);
1412
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1413/**
1414 * genphy_restart_aneg - Enable and Restart Autonegotiation
1415 * @phydev: target phy_device struct
1416 */
1417int genphy_restart_aneg(struct phy_device *phydev)
1418{
1419	/* Don't isolate the PHY if we're negotiating */
1420	return phy_modify(phydev, MII_BMCR, BMCR_ISOLATE,
1421			  BMCR_ANENABLE | BMCR_ANRESTART);
1422}
1423EXPORT_SYMBOL(genphy_restart_aneg);
1424
1425/**
1426 * genphy_config_aneg - restart auto-negotiation or write BMCR
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1427 * @phydev: target phy_device struct
 
1428 *
1429 * Description: If auto-negotiation is enabled, we configure the
1430 *   advertising, and then restart auto-negotiation.  If it is not
1431 *   enabled, then we write the BMCR.
1432 */
1433int genphy_config_aneg(struct phy_device *phydev)
1434{
1435	int err, changed;
 
 
 
1436
1437	changed = genphy_config_eee_advert(phydev);
 
 
 
 
1438
1439	if (AUTONEG_ENABLE != phydev->autoneg)
1440		return genphy_setup_forced(phydev);
1441
1442	err = genphy_config_advert(phydev);
1443	if (err < 0) /* error */
1444		return err;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1445
1446	changed |= err;
 
 
1447
1448	if (changed == 0) {
1449		/* Advertisement hasn't changed, but maybe aneg was never on to
1450		 * begin with?  Or maybe phy was isolated?
1451		 */
1452		int ctl = phy_read(phydev, MII_BMCR);
1453
1454		if (ctl < 0)
1455			return ctl;
1456
1457		if (!(ctl & BMCR_ANENABLE) || (ctl & BMCR_ISOLATE))
1458			changed = 1; /* do restart aneg */
1459	}
1460
1461	/* Only restart aneg if we are advertising something different
1462	 * than we were before.
1463	 */
1464	if (changed > 0)
1465		return genphy_restart_aneg(phydev);
1466
1467	return 0;
1468}
1469EXPORT_SYMBOL(genphy_config_aneg);
1470
1471/**
1472 * genphy_aneg_done - return auto-negotiation status
1473 * @phydev: target phy_device struct
1474 *
1475 * Description: Reads the status register and returns 0 either if
1476 *   auto-negotiation is incomplete, or if there was an error.
1477 *   Returns BMSR_ANEGCOMPLETE if auto-negotiation is done.
1478 */
1479int genphy_aneg_done(struct phy_device *phydev)
1480{
1481	int retval = phy_read(phydev, MII_BMSR);
1482
1483	return (retval < 0) ? retval : (retval & BMSR_ANEGCOMPLETE);
1484}
1485EXPORT_SYMBOL(genphy_aneg_done);
1486
1487/**
1488 * genphy_update_link - update link status in @phydev
1489 * @phydev: target phy_device struct
1490 *
1491 * Description: Update the value in phydev->link to reflect the
1492 *   current link value.  In order to do this, we need to read
1493 *   the status register twice, keeping the second value.
1494 */
1495int genphy_update_link(struct phy_device *phydev)
1496{
1497	int status;
1498
1499	/* Do a fake read */
1500	status = phy_read(phydev, MII_BMSR);
1501	if (status < 0)
1502		return status;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1503
1504	/* Read link and autonegotiation status */
1505	status = phy_read(phydev, MII_BMSR);
1506	if (status < 0)
1507		return status;
 
 
 
1508
1509	if ((status & BMSR_LSTATUS) == 0)
 
 
 
1510		phydev->link = 0;
1511	else
1512		phydev->link = 1;
1513
1514	return 0;
1515}
1516EXPORT_SYMBOL(genphy_update_link);
1517
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1518/**
1519 * genphy_read_status - check the link status and update current link state
1520 * @phydev: target phy_device struct
1521 *
1522 * Description: Check the link, then figure out the current state
1523 *   by comparing what we advertise with what the link partner
1524 *   advertises.  Start by checking the gigabit possibilities,
1525 *   then move on to 10/100.
1526 */
1527int genphy_read_status(struct phy_device *phydev)
1528{
1529	int adv;
1530	int err;
1531	int lpa;
1532	int lpagb = 0;
1533	int common_adv;
1534	int common_adv_gb = 0;
1535
1536	/* Update the link, but return if there was an error */
1537	err = genphy_update_link(phydev);
1538	if (err)
1539		return err;
1540
1541	phydev->lp_advertising = 0;
 
 
1542
1543	if (AUTONEG_ENABLE == phydev->autoneg) {
1544		if (phydev->supported & (SUPPORTED_1000baseT_Half
1545					| SUPPORTED_1000baseT_Full)) {
1546			lpagb = phy_read(phydev, MII_STAT1000);
1547			if (lpagb < 0)
1548				return lpagb;
1549
1550			adv = phy_read(phydev, MII_CTRL1000);
1551			if (adv < 0)
1552				return adv;
1553
1554			phydev->lp_advertising =
1555				mii_stat1000_to_ethtool_lpa_t(lpagb);
1556			common_adv_gb = lpagb & adv << 2;
1557		}
1558
1559		lpa = phy_read(phydev, MII_LPA);
1560		if (lpa < 0)
1561			return lpa;
1562
1563		phydev->lp_advertising |= mii_lpa_to_ethtool_lpa_t(lpa);
 
 
 
 
 
 
1564
1565		adv = phy_read(phydev, MII_ADVERTISE);
1566		if (adv < 0)
1567			return adv;
1568
1569		common_adv = lpa & adv;
 
 
 
 
 
 
 
 
 
 
1570
1571		phydev->speed = SPEED_10;
1572		phydev->duplex = DUPLEX_HALF;
1573		phydev->pause = 0;
1574		phydev->asym_pause = 0;
 
 
 
 
1575
1576		if (common_adv_gb & (LPA_1000FULL | LPA_1000HALF)) {
1577			phydev->speed = SPEED_1000;
 
1578
1579			if (common_adv_gb & LPA_1000FULL)
1580				phydev->duplex = DUPLEX_FULL;
1581		} else if (common_adv & (LPA_100FULL | LPA_100HALF)) {
1582			phydev->speed = SPEED_100;
1583
1584			if (common_adv & LPA_100FULL)
1585				phydev->duplex = DUPLEX_FULL;
1586		} else
1587			if (common_adv & LPA_10FULL)
1588				phydev->duplex = DUPLEX_FULL;
1589
1590		if (phydev->duplex == DUPLEX_FULL) {
1591			phydev->pause = lpa & LPA_PAUSE_CAP ? 1 : 0;
1592			phydev->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0;
1593		}
1594	} else {
 
1595		int bmcr = phy_read(phydev, MII_BMCR);
1596
1597		if (bmcr < 0)
1598			return bmcr;
1599
1600		if (bmcr & BMCR_FULLDPLX)
1601			phydev->duplex = DUPLEX_FULL;
1602		else
1603			phydev->duplex = DUPLEX_HALF;
1604
1605		if (bmcr & BMCR_SPEED1000)
1606			phydev->speed = SPEED_1000;
1607		else if (bmcr & BMCR_SPEED100)
1608			phydev->speed = SPEED_100;
1609		else
1610			phydev->speed = SPEED_10;
1611
1612		phydev->pause = 0;
1613		phydev->asym_pause = 0;
1614	}
1615
1616	return 0;
1617}
1618EXPORT_SYMBOL(genphy_read_status);
1619
1620/**
1621 * genphy_soft_reset - software reset the PHY via BMCR_RESET bit
1622 * @phydev: target phy_device struct
1623 *
1624 * Description: Perform a software PHY reset using the standard
1625 * BMCR_RESET bit and poll for the reset bit to be cleared.
1626 *
1627 * Returns: 0 on success, < 0 on failure
1628 */
1629int genphy_soft_reset(struct phy_device *phydev)
1630{
 
1631	int ret;
1632
1633	ret = phy_write(phydev, MII_BMCR, BMCR_RESET);
 
 
 
1634	if (ret < 0)
1635		return ret;
1636
1637	return phy_poll_reset(phydev);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1638}
1639EXPORT_SYMBOL(genphy_soft_reset);
1640
1641int genphy_config_init(struct phy_device *phydev)
 
 
 
 
 
 
 
 
 
1642{
1643	int val;
1644	u32 features;
1645
1646	features = (SUPPORTED_TP | SUPPORTED_MII
1647			| SUPPORTED_AUI | SUPPORTED_FIBRE |
1648			SUPPORTED_BNC | SUPPORTED_Pause | SUPPORTED_Asym_Pause);
1649
1650	/* Do we support autonegotiation? */
1651	val = phy_read(phydev, MII_BMSR);
1652	if (val < 0)
1653		return val;
1654
1655	if (val & BMSR_ANEGCAPABLE)
1656		features |= SUPPORTED_Autoneg;
1657
1658	if (val & BMSR_100FULL)
1659		features |= SUPPORTED_100baseT_Full;
1660	if (val & BMSR_100HALF)
1661		features |= SUPPORTED_100baseT_Half;
1662	if (val & BMSR_10FULL)
1663		features |= SUPPORTED_10baseT_Full;
1664	if (val & BMSR_10HALF)
1665		features |= SUPPORTED_10baseT_Half;
1666
1667	if (val & BMSR_ESTATEN) {
1668		val = phy_read(phydev, MII_ESTATUS);
1669		if (val < 0)
1670			return val;
1671
1672		if (val & ESTATUS_1000_TFULL)
1673			features |= SUPPORTED_1000baseT_Full;
1674		if (val & ESTATUS_1000_THALF)
1675			features |= SUPPORTED_1000baseT_Half;
 
 
1676	}
1677
1678	phydev->supported &= features;
1679	phydev->advertising &= features;
1680
1681	return 0;
1682}
1683EXPORT_SYMBOL(genphy_config_init);
1684
1685/* This is used for the phy device which doesn't support the MMD extended
1686 * register access, but it does have side effect when we are trying to access
1687 * the MMD register via indirect method.
1688 */
1689int genphy_read_mmd_unsupported(struct phy_device *phdev, int devad, u16 regnum)
1690{
1691	return -EOPNOTSUPP;
1692}
1693EXPORT_SYMBOL(genphy_read_mmd_unsupported);
1694
1695int genphy_write_mmd_unsupported(struct phy_device *phdev, int devnum,
1696				 u16 regnum, u16 val)
1697{
1698	return -EOPNOTSUPP;
1699}
1700EXPORT_SYMBOL(genphy_write_mmd_unsupported);
1701
1702int genphy_suspend(struct phy_device *phydev)
1703{
1704	return phy_set_bits(phydev, MII_BMCR, BMCR_PDOWN);
1705}
1706EXPORT_SYMBOL(genphy_suspend);
1707
1708int genphy_resume(struct phy_device *phydev)
1709{
1710	return phy_clear_bits(phydev, MII_BMCR, BMCR_PDOWN);
1711}
1712EXPORT_SYMBOL(genphy_resume);
1713
1714int genphy_loopback(struct phy_device *phydev, bool enable)
1715{
1716	return phy_modify(phydev, MII_BMCR, BMCR_LOOPBACK,
1717			  enable ? BMCR_LOOPBACK : 0);
1718}
1719EXPORT_SYMBOL(genphy_loopback);
1720
1721static int __set_phy_supported(struct phy_device *phydev, u32 max_speed)
 
 
 
 
 
 
 
 
 
1722{
1723	/* The default values for phydev->supported are provided by the PHY
1724	 * driver "features" member, we want to reset to sane defaults first
1725	 * before supporting higher speeds.
1726	 */
1727	phydev->supported &= PHY_DEFAULT_FEATURES;
1728
1729	switch (max_speed) {
1730	default:
1731		return -ENOTSUPP;
1732	case SPEED_1000:
1733		phydev->supported |= PHY_1000BT_FEATURES;
1734		/* fall through */
1735	case SPEED_100:
1736		phydev->supported |= PHY_100BT_FEATURES;
1737		/* fall through */
1738	case SPEED_10:
1739		phydev->supported |= PHY_10BT_FEATURES;
1740	}
1741
1742	return 0;
 
 
 
 
 
 
 
 
 
 
 
 
 
1743}
 
1744
1745int phy_set_max_speed(struct phy_device *phydev, u32 max_speed)
 
 
 
 
 
 
 
1746{
1747	int err;
 
 
 
1748
1749	err = __set_phy_supported(phydev, max_speed);
1750	if (err)
1751		return err;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1752
1753	phydev->advertising = phydev->supported;
 
 
1754
1755	return 0;
1756}
1757EXPORT_SYMBOL(phy_set_max_speed);
1758
1759static void of_set_phy_supported(struct phy_device *phydev)
 
 
 
 
 
 
 
 
 
 
 
1760{
1761	struct device_node *node = phydev->mdio.dev.of_node;
1762	u32 max_speed;
1763
1764	if (!IS_ENABLED(CONFIG_OF_MDIO))
1765		return;
1766
1767	if (!node)
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1768		return;
 
1769
1770	if (!of_property_read_u32(node, "max-speed", &max_speed))
1771		__set_phy_supported(phydev, max_speed);
 
1772}
 
1773
1774static void of_set_phy_eee_broken(struct phy_device *phydev)
 
1775{
1776	struct device_node *node = phydev->mdio.dev.of_node;
1777	u32 broken = 0;
1778
1779	if (!IS_ENABLED(CONFIG_OF_MDIO))
1780		return;
 
1781
1782	if (!node)
1783		return;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1784
1785	if (of_property_read_bool(node, "eee-broken-100tx"))
1786		broken |= MDIO_EEE_100TX;
1787	if (of_property_read_bool(node, "eee-broken-1000t"))
1788		broken |= MDIO_EEE_1000T;
1789	if (of_property_read_bool(node, "eee-broken-10gt"))
1790		broken |= MDIO_EEE_10GT;
1791	if (of_property_read_bool(node, "eee-broken-1000kx"))
1792		broken |= MDIO_EEE_1000KX;
1793	if (of_property_read_bool(node, "eee-broken-10gkx4"))
1794		broken |= MDIO_EEE_10GKX4;
1795	if (of_property_read_bool(node, "eee-broken-10gkr"))
1796		broken |= MDIO_EEE_10GKR;
 
 
 
 
 
 
 
 
1797
1798	phydev->eee_broken_modes = broken;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1799}
1800
1801/**
1802 * phy_probe - probe and init a PHY device
1803 * @dev: device to probe and init
1804 *
1805 * Description: Take care of setting up the phy_device structure,
1806 *   set the state to READY (the driver's init function should
1807 *   set it to STARTING if needed).
1808 */
1809static int phy_probe(struct device *dev)
1810{
1811	struct phy_device *phydev = to_phy_device(dev);
1812	struct device_driver *drv = phydev->mdio.dev.driver;
1813	struct phy_driver *phydrv = to_phy_driver(drv);
1814	int err = 0;
1815
1816	phydev->drv = phydrv;
1817
1818	/* Disable the interrupt if the PHY doesn't support it
1819	 * but the interrupt is still a valid one
1820	 */
1821	if (!(phydrv->flags & PHY_HAS_INTERRUPT) &&
1822	    phy_interrupt_is_valid(phydev))
1823		phydev->irq = PHY_POLL;
1824
1825	if (phydrv->flags & PHY_IS_INTERNAL)
1826		phydev->is_internal = true;
1827
1828	mutex_lock(&phydev->lock);
1829
 
 
 
 
 
 
 
 
 
1830	/* Start out supporting everything. Eventually,
1831	 * a controller will attach, and may modify one
1832	 * or both of these values
1833	 */
1834	phydev->supported = phydrv->features;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1835	of_set_phy_supported(phydev);
1836	phydev->advertising = phydev->supported;
1837
1838	/* Get the EEE modes we want to prohibit. We will ask
1839	 * the PHY stop advertising these mode later on
1840	 */
1841	of_set_phy_eee_broken(phydev);
1842
1843	/* The Pause Frame bits indicate that the PHY can support passing
1844	 * pause frames. During autonegotiation, the PHYs will determine if
1845	 * they should allow pause frames to pass.  The MAC driver should then
1846	 * use that result to determine whether to enable flow control via
1847	 * pause frames.
1848	 *
1849	 * Normally, PHY drivers should not set the Pause bits, and instead
1850	 * allow phylib to do that.  However, there may be some situations
1851	 * (e.g. hardware erratum) where the driver wants to set only one
1852	 * of these bits.
1853	 */
1854	if (phydrv->features & (SUPPORTED_Pause | SUPPORTED_Asym_Pause)) {
1855		phydev->supported &= ~(SUPPORTED_Pause | SUPPORTED_Asym_Pause);
1856		phydev->supported |= phydrv->features &
1857				     (SUPPORTED_Pause | SUPPORTED_Asym_Pause);
1858	} else {
1859		phydev->supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause;
1860	}
1861
1862	/* Set the state to READY by default */
1863	phydev->state = PHY_READY;
1864
1865	if (phydev->drv->probe) {
1866		/* Deassert the reset signal */
1867		phy_device_reset(phydev, 0);
1868
1869		err = phydev->drv->probe(phydev);
1870		if (err) {
1871			/* Assert the reset signal */
1872			phy_device_reset(phydev, 1);
1873		}
1874	}
1875
1876	mutex_unlock(&phydev->lock);
1877
1878	return err;
1879}
1880
1881static int phy_remove(struct device *dev)
1882{
1883	struct phy_device *phydev = to_phy_device(dev);
1884
1885	cancel_delayed_work_sync(&phydev->state_queue);
1886
1887	mutex_lock(&phydev->lock);
1888	phydev->state = PHY_DOWN;
1889	mutex_unlock(&phydev->lock);
1890
1891	if (phydev->drv && phydev->drv->remove) {
 
 
 
1892		phydev->drv->remove(phydev);
1893
1894		/* Assert the reset signal */
1895		phy_device_reset(phydev, 1);
1896	}
1897	phydev->drv = NULL;
1898
1899	return 0;
1900}
1901
1902/**
1903 * phy_driver_register - register a phy_driver with the PHY layer
1904 * @new_driver: new phy_driver to register
1905 * @owner: module owning this PHY
1906 */
1907int phy_driver_register(struct phy_driver *new_driver, struct module *owner)
1908{
1909	int retval;
1910
 
 
 
 
 
 
 
 
 
1911	new_driver->mdiodrv.flags |= MDIO_DEVICE_IS_PHY;
1912	new_driver->mdiodrv.driver.name = new_driver->name;
1913	new_driver->mdiodrv.driver.bus = &mdio_bus_type;
1914	new_driver->mdiodrv.driver.probe = phy_probe;
1915	new_driver->mdiodrv.driver.remove = phy_remove;
1916	new_driver->mdiodrv.driver.owner = owner;
 
1917
1918	retval = driver_register(&new_driver->mdiodrv.driver);
1919	if (retval) {
1920		pr_err("%s: Error %d in registering driver\n",
1921		       new_driver->name, retval);
1922
1923		return retval;
1924	}
1925
1926	pr_debug("%s: Registered new driver\n", new_driver->name);
1927
1928	return 0;
1929}
1930EXPORT_SYMBOL(phy_driver_register);
1931
1932int phy_drivers_register(struct phy_driver *new_driver, int n,
1933			 struct module *owner)
1934{
1935	int i, ret = 0;
1936
1937	for (i = 0; i < n; i++) {
1938		ret = phy_driver_register(new_driver + i, owner);
1939		if (ret) {
1940			while (i-- > 0)
1941				phy_driver_unregister(new_driver + i);
1942			break;
1943		}
1944	}
1945	return ret;
1946}
1947EXPORT_SYMBOL(phy_drivers_register);
1948
1949void phy_driver_unregister(struct phy_driver *drv)
1950{
1951	driver_unregister(&drv->mdiodrv.driver);
1952}
1953EXPORT_SYMBOL(phy_driver_unregister);
1954
1955void phy_drivers_unregister(struct phy_driver *drv, int n)
1956{
1957	int i;
1958
1959	for (i = 0; i < n; i++)
1960		phy_driver_unregister(drv + i);
1961}
1962EXPORT_SYMBOL(phy_drivers_unregister);
1963
1964static struct phy_driver genphy_driver = {
1965	.phy_id		= 0xffffffff,
1966	.phy_id_mask	= 0xffffffff,
1967	.name		= "Generic PHY",
1968	.soft_reset	= genphy_no_soft_reset,
1969	.config_init	= genphy_config_init,
1970	.features	= PHY_GBIT_FEATURES | SUPPORTED_MII |
1971			  SUPPORTED_AUI | SUPPORTED_FIBRE |
1972			  SUPPORTED_BNC,
1973	.aneg_done	= genphy_aneg_done,
1974	.suspend	= genphy_suspend,
1975	.resume		= genphy_resume,
1976	.set_loopback   = genphy_loopback,
1977};
1978
 
 
 
 
 
 
 
 
1979static int __init phy_init(void)
1980{
1981	int rc;
1982
1983	rc = mdio_bus_init();
1984	if (rc)
1985		return rc;
1986
1987	rc = phy_driver_register(&genphy_10g_driver, THIS_MODULE);
 
 
 
1988	if (rc)
1989		goto err_10g;
1990
1991	rc = phy_driver_register(&genphy_driver, THIS_MODULE);
1992	if (rc) {
1993		phy_driver_unregister(&genphy_10g_driver);
1994err_10g:
1995		mdio_bus_exit();
1996	}
1997
1998	return rc;
1999}
2000
2001static void __exit phy_exit(void)
2002{
2003	phy_driver_unregister(&genphy_10g_driver);
2004	phy_driver_unregister(&genphy_driver);
2005	mdio_bus_exit();
 
2006}
2007
2008subsys_initcall(phy_init);
2009module_exit(phy_exit);