Loading...
1#include <linux/export.h>
2#include <linux/bitops.h>
3#include <linux/elf.h>
4#include <linux/mm.h>
5
6#include <linux/io.h>
7#include <linux/sched.h>
8#include <linux/sched/clock.h>
9#include <linux/random.h>
10#include <asm/processor.h>
11#include <asm/apic.h>
12#include <asm/cpu.h>
13#include <asm/spec-ctrl.h>
14#include <asm/smp.h>
15#include <asm/pci-direct.h>
16#include <asm/delay.h>
17
18#ifdef CONFIG_X86_64
19# include <asm/mmconfig.h>
20# include <asm/set_memory.h>
21#endif
22
23#include "cpu.h"
24
25static const int amd_erratum_383[];
26static const int amd_erratum_400[];
27static bool cpu_has_amd_erratum(struct cpuinfo_x86 *cpu, const int *erratum);
28
29/*
30 * nodes_per_socket: Stores the number of nodes per socket.
31 * Refer to Fam15h Models 00-0fh BKDG - CPUID Fn8000_001E_ECX
32 * Node Identifiers[10:8]
33 */
34static u32 nodes_per_socket = 1;
35
36static inline int rdmsrl_amd_safe(unsigned msr, unsigned long long *p)
37{
38 u32 gprs[8] = { 0 };
39 int err;
40
41 WARN_ONCE((boot_cpu_data.x86 != 0xf),
42 "%s should only be used on K8!\n", __func__);
43
44 gprs[1] = msr;
45 gprs[7] = 0x9c5a203a;
46
47 err = rdmsr_safe_regs(gprs);
48
49 *p = gprs[0] | ((u64)gprs[2] << 32);
50
51 return err;
52}
53
54static inline int wrmsrl_amd_safe(unsigned msr, unsigned long long val)
55{
56 u32 gprs[8] = { 0 };
57
58 WARN_ONCE((boot_cpu_data.x86 != 0xf),
59 "%s should only be used on K8!\n", __func__);
60
61 gprs[0] = (u32)val;
62 gprs[1] = msr;
63 gprs[2] = val >> 32;
64 gprs[7] = 0x9c5a203a;
65
66 return wrmsr_safe_regs(gprs);
67}
68
69/*
70 * B step AMD K6 before B 9730xxxx have hardware bugs that can cause
71 * misexecution of code under Linux. Owners of such processors should
72 * contact AMD for precise details and a CPU swap.
73 *
74 * See http://www.multimania.com/poulot/k6bug.html
75 * and section 2.6.2 of "AMD-K6 Processor Revision Guide - Model 6"
76 * (Publication # 21266 Issue Date: August 1998)
77 *
78 * The following test is erm.. interesting. AMD neglected to up
79 * the chip setting when fixing the bug but they also tweaked some
80 * performance at the same time..
81 */
82
83extern __visible void vide(void);
84__asm__(".globl vide\n"
85 ".type vide, @function\n"
86 ".align 4\n"
87 "vide: ret\n");
88
89static void init_amd_k5(struct cpuinfo_x86 *c)
90{
91#ifdef CONFIG_X86_32
92/*
93 * General Systems BIOSen alias the cpu frequency registers
94 * of the Elan at 0x000df000. Unfortunately, one of the Linux
95 * drivers subsequently pokes it, and changes the CPU speed.
96 * Workaround : Remove the unneeded alias.
97 */
98#define CBAR (0xfffc) /* Configuration Base Address (32-bit) */
99#define CBAR_ENB (0x80000000)
100#define CBAR_KEY (0X000000CB)
101 if (c->x86_model == 9 || c->x86_model == 10) {
102 if (inl(CBAR) & CBAR_ENB)
103 outl(0 | CBAR_KEY, CBAR);
104 }
105#endif
106}
107
108static void init_amd_k6(struct cpuinfo_x86 *c)
109{
110#ifdef CONFIG_X86_32
111 u32 l, h;
112 int mbytes = get_num_physpages() >> (20-PAGE_SHIFT);
113
114 if (c->x86_model < 6) {
115 /* Based on AMD doc 20734R - June 2000 */
116 if (c->x86_model == 0) {
117 clear_cpu_cap(c, X86_FEATURE_APIC);
118 set_cpu_cap(c, X86_FEATURE_PGE);
119 }
120 return;
121 }
122
123 if (c->x86_model == 6 && c->x86_stepping == 1) {
124 const int K6_BUG_LOOP = 1000000;
125 int n;
126 void (*f_vide)(void);
127 u64 d, d2;
128
129 pr_info("AMD K6 stepping B detected - ");
130
131 /*
132 * It looks like AMD fixed the 2.6.2 bug and improved indirect
133 * calls at the same time.
134 */
135
136 n = K6_BUG_LOOP;
137 f_vide = vide;
138 OPTIMIZER_HIDE_VAR(f_vide);
139 d = rdtsc();
140 while (n--)
141 f_vide();
142 d2 = rdtsc();
143 d = d2-d;
144
145 if (d > 20*K6_BUG_LOOP)
146 pr_cont("system stability may be impaired when more than 32 MB are used.\n");
147 else
148 pr_cont("probably OK (after B9730xxxx).\n");
149 }
150
151 /* K6 with old style WHCR */
152 if (c->x86_model < 8 ||
153 (c->x86_model == 8 && c->x86_stepping < 8)) {
154 /* We can only write allocate on the low 508Mb */
155 if (mbytes > 508)
156 mbytes = 508;
157
158 rdmsr(MSR_K6_WHCR, l, h);
159 if ((l&0x0000FFFF) == 0) {
160 unsigned long flags;
161 l = (1<<0)|((mbytes/4)<<1);
162 local_irq_save(flags);
163 wbinvd();
164 wrmsr(MSR_K6_WHCR, l, h);
165 local_irq_restore(flags);
166 pr_info("Enabling old style K6 write allocation for %d Mb\n",
167 mbytes);
168 }
169 return;
170 }
171
172 if ((c->x86_model == 8 && c->x86_stepping > 7) ||
173 c->x86_model == 9 || c->x86_model == 13) {
174 /* The more serious chips .. */
175
176 if (mbytes > 4092)
177 mbytes = 4092;
178
179 rdmsr(MSR_K6_WHCR, l, h);
180 if ((l&0xFFFF0000) == 0) {
181 unsigned long flags;
182 l = ((mbytes>>2)<<22)|(1<<16);
183 local_irq_save(flags);
184 wbinvd();
185 wrmsr(MSR_K6_WHCR, l, h);
186 local_irq_restore(flags);
187 pr_info("Enabling new style K6 write allocation for %d Mb\n",
188 mbytes);
189 }
190
191 return;
192 }
193
194 if (c->x86_model == 10) {
195 /* AMD Geode LX is model 10 */
196 /* placeholder for any needed mods */
197 return;
198 }
199#endif
200}
201
202static void init_amd_k7(struct cpuinfo_x86 *c)
203{
204#ifdef CONFIG_X86_32
205 u32 l, h;
206
207 /*
208 * Bit 15 of Athlon specific MSR 15, needs to be 0
209 * to enable SSE on Palomino/Morgan/Barton CPU's.
210 * If the BIOS didn't enable it already, enable it here.
211 */
212 if (c->x86_model >= 6 && c->x86_model <= 10) {
213 if (!cpu_has(c, X86_FEATURE_XMM)) {
214 pr_info("Enabling disabled K7/SSE Support.\n");
215 msr_clear_bit(MSR_K7_HWCR, 15);
216 set_cpu_cap(c, X86_FEATURE_XMM);
217 }
218 }
219
220 /*
221 * It's been determined by AMD that Athlons since model 8 stepping 1
222 * are more robust with CLK_CTL set to 200xxxxx instead of 600xxxxx
223 * As per AMD technical note 27212 0.2
224 */
225 if ((c->x86_model == 8 && c->x86_stepping >= 1) || (c->x86_model > 8)) {
226 rdmsr(MSR_K7_CLK_CTL, l, h);
227 if ((l & 0xfff00000) != 0x20000000) {
228 pr_info("CPU: CLK_CTL MSR was %x. Reprogramming to %x\n",
229 l, ((l & 0x000fffff)|0x20000000));
230 wrmsr(MSR_K7_CLK_CTL, (l & 0x000fffff)|0x20000000, h);
231 }
232 }
233
234 set_cpu_cap(c, X86_FEATURE_K7);
235
236 /* calling is from identify_secondary_cpu() ? */
237 if (!c->cpu_index)
238 return;
239
240 /*
241 * Certain Athlons might work (for various values of 'work') in SMP
242 * but they are not certified as MP capable.
243 */
244 /* Athlon 660/661 is valid. */
245 if ((c->x86_model == 6) && ((c->x86_stepping == 0) ||
246 (c->x86_stepping == 1)))
247 return;
248
249 /* Duron 670 is valid */
250 if ((c->x86_model == 7) && (c->x86_stepping == 0))
251 return;
252
253 /*
254 * Athlon 662, Duron 671, and Athlon >model 7 have capability
255 * bit. It's worth noting that the A5 stepping (662) of some
256 * Athlon XP's have the MP bit set.
257 * See http://www.heise.de/newsticker/data/jow-18.10.01-000 for
258 * more.
259 */
260 if (((c->x86_model == 6) && (c->x86_stepping >= 2)) ||
261 ((c->x86_model == 7) && (c->x86_stepping >= 1)) ||
262 (c->x86_model > 7))
263 if (cpu_has(c, X86_FEATURE_MP))
264 return;
265
266 /* If we get here, not a certified SMP capable AMD system. */
267
268 /*
269 * Don't taint if we are running SMP kernel on a single non-MP
270 * approved Athlon
271 */
272 WARN_ONCE(1, "WARNING: This combination of AMD"
273 " processors is not suitable for SMP.\n");
274 add_taint(TAINT_CPU_OUT_OF_SPEC, LOCKDEP_NOW_UNRELIABLE);
275#endif
276}
277
278#ifdef CONFIG_NUMA
279/*
280 * To workaround broken NUMA config. Read the comment in
281 * srat_detect_node().
282 */
283static int nearby_node(int apicid)
284{
285 int i, node;
286
287 for (i = apicid - 1; i >= 0; i--) {
288 node = __apicid_to_node[i];
289 if (node != NUMA_NO_NODE && node_online(node))
290 return node;
291 }
292 for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) {
293 node = __apicid_to_node[i];
294 if (node != NUMA_NO_NODE && node_online(node))
295 return node;
296 }
297 return first_node(node_online_map); /* Shouldn't happen */
298}
299#endif
300
301#ifdef CONFIG_SMP
302/*
303 * Fix up cpu_core_id for pre-F17h systems to be in the
304 * [0 .. cores_per_node - 1] range. Not really needed but
305 * kept so as not to break existing setups.
306 */
307static void legacy_fixup_core_id(struct cpuinfo_x86 *c)
308{
309 u32 cus_per_node;
310
311 if (c->x86 >= 0x17)
312 return;
313
314 cus_per_node = c->x86_max_cores / nodes_per_socket;
315 c->cpu_core_id %= cus_per_node;
316}
317
318/*
319 * Fixup core topology information for
320 * (1) AMD multi-node processors
321 * Assumption: Number of cores in each internal node is the same.
322 * (2) AMD processors supporting compute units
323 */
324static void amd_get_topology(struct cpuinfo_x86 *c)
325{
326 u8 node_id;
327 int cpu = smp_processor_id();
328
329 /* get information required for multi-node processors */
330 if (boot_cpu_has(X86_FEATURE_TOPOEXT)) {
331 u32 eax, ebx, ecx, edx;
332
333 cpuid(0x8000001e, &eax, &ebx, &ecx, &edx);
334
335 node_id = ecx & 0xff;
336 smp_num_siblings = ((ebx >> 8) & 0xff) + 1;
337
338 if (c->x86 == 0x15)
339 c->cu_id = ebx & 0xff;
340
341 if (c->x86 >= 0x17) {
342 c->cpu_core_id = ebx & 0xff;
343
344 if (smp_num_siblings > 1)
345 c->x86_max_cores /= smp_num_siblings;
346 }
347
348 /*
349 * We may have multiple LLCs if L3 caches exist, so check if we
350 * have an L3 cache by looking at the L3 cache CPUID leaf.
351 */
352 if (cpuid_edx(0x80000006)) {
353 if (c->x86 == 0x17) {
354 /*
355 * LLC is at the core complex level.
356 * Core complex id is ApicId[3].
357 */
358 per_cpu(cpu_llc_id, cpu) = c->apicid >> 3;
359 } else {
360 /* LLC is at the node level. */
361 per_cpu(cpu_llc_id, cpu) = node_id;
362 }
363 }
364 } else if (cpu_has(c, X86_FEATURE_NODEID_MSR)) {
365 u64 value;
366
367 rdmsrl(MSR_FAM10H_NODE_ID, value);
368 node_id = value & 7;
369
370 per_cpu(cpu_llc_id, cpu) = node_id;
371 } else
372 return;
373
374 if (nodes_per_socket > 1) {
375 set_cpu_cap(c, X86_FEATURE_AMD_DCM);
376 legacy_fixup_core_id(c);
377 }
378}
379#endif
380
381/*
382 * On a AMD dual core setup the lower bits of the APIC id distinguish the cores.
383 * Assumes number of cores is a power of two.
384 */
385static void amd_detect_cmp(struct cpuinfo_x86 *c)
386{
387#ifdef CONFIG_SMP
388 unsigned bits;
389 int cpu = smp_processor_id();
390
391 bits = c->x86_coreid_bits;
392 /* Low order bits define the core id (index of core in socket) */
393 c->cpu_core_id = c->initial_apicid & ((1 << bits)-1);
394 /* Convert the initial APIC ID into the socket ID */
395 c->phys_proc_id = c->initial_apicid >> bits;
396 /* use socket ID also for last level cache */
397 per_cpu(cpu_llc_id, cpu) = c->phys_proc_id;
398 amd_get_topology(c);
399#endif
400}
401
402u16 amd_get_nb_id(int cpu)
403{
404 u16 id = 0;
405#ifdef CONFIG_SMP
406 id = per_cpu(cpu_llc_id, cpu);
407#endif
408 return id;
409}
410EXPORT_SYMBOL_GPL(amd_get_nb_id);
411
412u32 amd_get_nodes_per_socket(void)
413{
414 return nodes_per_socket;
415}
416EXPORT_SYMBOL_GPL(amd_get_nodes_per_socket);
417
418static void srat_detect_node(struct cpuinfo_x86 *c)
419{
420#ifdef CONFIG_NUMA
421 int cpu = smp_processor_id();
422 int node;
423 unsigned apicid = c->apicid;
424
425 node = numa_cpu_node(cpu);
426 if (node == NUMA_NO_NODE)
427 node = per_cpu(cpu_llc_id, cpu);
428
429 /*
430 * On multi-fabric platform (e.g. Numascale NumaChip) a
431 * platform-specific handler needs to be called to fixup some
432 * IDs of the CPU.
433 */
434 if (x86_cpuinit.fixup_cpu_id)
435 x86_cpuinit.fixup_cpu_id(c, node);
436
437 if (!node_online(node)) {
438 /*
439 * Two possibilities here:
440 *
441 * - The CPU is missing memory and no node was created. In
442 * that case try picking one from a nearby CPU.
443 *
444 * - The APIC IDs differ from the HyperTransport node IDs
445 * which the K8 northbridge parsing fills in. Assume
446 * they are all increased by a constant offset, but in
447 * the same order as the HT nodeids. If that doesn't
448 * result in a usable node fall back to the path for the
449 * previous case.
450 *
451 * This workaround operates directly on the mapping between
452 * APIC ID and NUMA node, assuming certain relationship
453 * between APIC ID, HT node ID and NUMA topology. As going
454 * through CPU mapping may alter the outcome, directly
455 * access __apicid_to_node[].
456 */
457 int ht_nodeid = c->initial_apicid;
458
459 if (__apicid_to_node[ht_nodeid] != NUMA_NO_NODE)
460 node = __apicid_to_node[ht_nodeid];
461 /* Pick a nearby node */
462 if (!node_online(node))
463 node = nearby_node(apicid);
464 }
465 numa_set_node(cpu, node);
466#endif
467}
468
469static void early_init_amd_mc(struct cpuinfo_x86 *c)
470{
471#ifdef CONFIG_SMP
472 unsigned bits, ecx;
473
474 /* Multi core CPU? */
475 if (c->extended_cpuid_level < 0x80000008)
476 return;
477
478 ecx = cpuid_ecx(0x80000008);
479
480 c->x86_max_cores = (ecx & 0xff) + 1;
481
482 /* CPU telling us the core id bits shift? */
483 bits = (ecx >> 12) & 0xF;
484
485 /* Otherwise recompute */
486 if (bits == 0) {
487 while ((1 << bits) < c->x86_max_cores)
488 bits++;
489 }
490
491 c->x86_coreid_bits = bits;
492#endif
493}
494
495static void bsp_init_amd(struct cpuinfo_x86 *c)
496{
497
498#ifdef CONFIG_X86_64
499 if (c->x86 >= 0xf) {
500 unsigned long long tseg;
501
502 /*
503 * Split up direct mapping around the TSEG SMM area.
504 * Don't do it for gbpages because there seems very little
505 * benefit in doing so.
506 */
507 if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg)) {
508 unsigned long pfn = tseg >> PAGE_SHIFT;
509
510 pr_debug("tseg: %010llx\n", tseg);
511 if (pfn_range_is_mapped(pfn, pfn + 1))
512 set_memory_4k((unsigned long)__va(tseg), 1);
513 }
514 }
515#endif
516
517 if (cpu_has(c, X86_FEATURE_CONSTANT_TSC)) {
518
519 if (c->x86 > 0x10 ||
520 (c->x86 == 0x10 && c->x86_model >= 0x2)) {
521 u64 val;
522
523 rdmsrl(MSR_K7_HWCR, val);
524 if (!(val & BIT(24)))
525 pr_warn(FW_BUG "TSC doesn't count with P0 frequency!\n");
526 }
527 }
528
529 if (c->x86 == 0x15) {
530 unsigned long upperbit;
531 u32 cpuid, assoc;
532
533 cpuid = cpuid_edx(0x80000005);
534 assoc = cpuid >> 16 & 0xff;
535 upperbit = ((cpuid >> 24) << 10) / assoc;
536
537 va_align.mask = (upperbit - 1) & PAGE_MASK;
538 va_align.flags = ALIGN_VA_32 | ALIGN_VA_64;
539
540 /* A random value per boot for bit slice [12:upper_bit) */
541 va_align.bits = get_random_int() & va_align.mask;
542 }
543
544 if (cpu_has(c, X86_FEATURE_MWAITX))
545 use_mwaitx_delay();
546
547 if (boot_cpu_has(X86_FEATURE_TOPOEXT)) {
548 u32 ecx;
549
550 ecx = cpuid_ecx(0x8000001e);
551 nodes_per_socket = ((ecx >> 8) & 7) + 1;
552 } else if (boot_cpu_has(X86_FEATURE_NODEID_MSR)) {
553 u64 value;
554
555 rdmsrl(MSR_FAM10H_NODE_ID, value);
556 nodes_per_socket = ((value >> 3) & 7) + 1;
557 }
558
559 if (c->x86 >= 0x15 && c->x86 <= 0x17) {
560 unsigned int bit;
561
562 switch (c->x86) {
563 case 0x15: bit = 54; break;
564 case 0x16: bit = 33; break;
565 case 0x17: bit = 10; break;
566 default: return;
567 }
568 /*
569 * Try to cache the base value so further operations can
570 * avoid RMW. If that faults, do not enable SSBD.
571 */
572 if (!rdmsrl_safe(MSR_AMD64_LS_CFG, &x86_amd_ls_cfg_base)) {
573 setup_force_cpu_cap(X86_FEATURE_LS_CFG_SSBD);
574 setup_force_cpu_cap(X86_FEATURE_SSBD);
575 x86_amd_ls_cfg_ssbd_mask = 1ULL << bit;
576 }
577 }
578}
579
580static void early_detect_mem_encrypt(struct cpuinfo_x86 *c)
581{
582 u64 msr;
583
584 /*
585 * BIOS support is required for SME and SEV.
586 * For SME: If BIOS has enabled SME then adjust x86_phys_bits by
587 * the SME physical address space reduction value.
588 * If BIOS has not enabled SME then don't advertise the
589 * SME feature (set in scattered.c).
590 * For SEV: If BIOS has not enabled SEV then don't advertise the
591 * SEV feature (set in scattered.c).
592 *
593 * In all cases, since support for SME and SEV requires long mode,
594 * don't advertise the feature under CONFIG_X86_32.
595 */
596 if (cpu_has(c, X86_FEATURE_SME) || cpu_has(c, X86_FEATURE_SEV)) {
597 /* Check if memory encryption is enabled */
598 rdmsrl(MSR_K8_SYSCFG, msr);
599 if (!(msr & MSR_K8_SYSCFG_MEM_ENCRYPT))
600 goto clear_all;
601
602 /*
603 * Always adjust physical address bits. Even though this
604 * will be a value above 32-bits this is still done for
605 * CONFIG_X86_32 so that accurate values are reported.
606 */
607 c->x86_phys_bits -= (cpuid_ebx(0x8000001f) >> 6) & 0x3f;
608
609 if (IS_ENABLED(CONFIG_X86_32))
610 goto clear_all;
611
612 rdmsrl(MSR_K7_HWCR, msr);
613 if (!(msr & MSR_K7_HWCR_SMMLOCK))
614 goto clear_sev;
615
616 return;
617
618clear_all:
619 clear_cpu_cap(c, X86_FEATURE_SME);
620clear_sev:
621 clear_cpu_cap(c, X86_FEATURE_SEV);
622 }
623}
624
625static void early_init_amd(struct cpuinfo_x86 *c)
626{
627 u32 dummy;
628
629 early_init_amd_mc(c);
630
631 rdmsr_safe(MSR_AMD64_PATCH_LEVEL, &c->microcode, &dummy);
632
633 /*
634 * c->x86_power is 8000_0007 edx. Bit 8 is TSC runs at constant rate
635 * with P/T states and does not stop in deep C-states
636 */
637 if (c->x86_power & (1 << 8)) {
638 set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
639 set_cpu_cap(c, X86_FEATURE_NONSTOP_TSC);
640 }
641
642 /* Bit 12 of 8000_0007 edx is accumulated power mechanism. */
643 if (c->x86_power & BIT(12))
644 set_cpu_cap(c, X86_FEATURE_ACC_POWER);
645
646#ifdef CONFIG_X86_64
647 set_cpu_cap(c, X86_FEATURE_SYSCALL32);
648#else
649 /* Set MTRR capability flag if appropriate */
650 if (c->x86 == 5)
651 if (c->x86_model == 13 || c->x86_model == 9 ||
652 (c->x86_model == 8 && c->x86_stepping >= 8))
653 set_cpu_cap(c, X86_FEATURE_K6_MTRR);
654#endif
655#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_PCI)
656 /*
657 * ApicID can always be treated as an 8-bit value for AMD APIC versions
658 * >= 0x10, but even old K8s came out of reset with version 0x10. So, we
659 * can safely set X86_FEATURE_EXTD_APICID unconditionally for families
660 * after 16h.
661 */
662 if (boot_cpu_has(X86_FEATURE_APIC)) {
663 if (c->x86 > 0x16)
664 set_cpu_cap(c, X86_FEATURE_EXTD_APICID);
665 else if (c->x86 >= 0xf) {
666 /* check CPU config space for extended APIC ID */
667 unsigned int val;
668
669 val = read_pci_config(0, 24, 0, 0x68);
670 if ((val >> 17 & 0x3) == 0x3)
671 set_cpu_cap(c, X86_FEATURE_EXTD_APICID);
672 }
673 }
674#endif
675
676 /*
677 * This is only needed to tell the kernel whether to use VMCALL
678 * and VMMCALL. VMMCALL is never executed except under virt, so
679 * we can set it unconditionally.
680 */
681 set_cpu_cap(c, X86_FEATURE_VMMCALL);
682
683 /* F16h erratum 793, CVE-2013-6885 */
684 if (c->x86 == 0x16 && c->x86_model <= 0xf)
685 msr_set_bit(MSR_AMD64_LS_CFG, 15);
686
687 /*
688 * Check whether the machine is affected by erratum 400. This is
689 * used to select the proper idle routine and to enable the check
690 * whether the machine is affected in arch_post_acpi_init(), which
691 * sets the X86_BUG_AMD_APIC_C1E bug depending on the MSR check.
692 */
693 if (cpu_has_amd_erratum(c, amd_erratum_400))
694 set_cpu_bug(c, X86_BUG_AMD_E400);
695
696 early_detect_mem_encrypt(c);
697}
698
699static void init_amd_k8(struct cpuinfo_x86 *c)
700{
701 u32 level;
702 u64 value;
703
704 /* On C+ stepping K8 rep microcode works well for copy/memset */
705 level = cpuid_eax(1);
706 if ((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58)
707 set_cpu_cap(c, X86_FEATURE_REP_GOOD);
708
709 /*
710 * Some BIOSes incorrectly force this feature, but only K8 revision D
711 * (model = 0x14) and later actually support it.
712 * (AMD Erratum #110, docId: 25759).
713 */
714 if (c->x86_model < 0x14 && cpu_has(c, X86_FEATURE_LAHF_LM)) {
715 clear_cpu_cap(c, X86_FEATURE_LAHF_LM);
716 if (!rdmsrl_amd_safe(0xc001100d, &value)) {
717 value &= ~BIT_64(32);
718 wrmsrl_amd_safe(0xc001100d, value);
719 }
720 }
721
722 if (!c->x86_model_id[0])
723 strcpy(c->x86_model_id, "Hammer");
724
725#ifdef CONFIG_SMP
726 /*
727 * Disable TLB flush filter by setting HWCR.FFDIS on K8
728 * bit 6 of msr C001_0015
729 *
730 * Errata 63 for SH-B3 steppings
731 * Errata 122 for all steppings (F+ have it disabled by default)
732 */
733 msr_set_bit(MSR_K7_HWCR, 6);
734#endif
735 set_cpu_bug(c, X86_BUG_SWAPGS_FENCE);
736}
737
738static void init_amd_gh(struct cpuinfo_x86 *c)
739{
740#ifdef CONFIG_MMCONF_FAM10H
741 /* do this for boot cpu */
742 if (c == &boot_cpu_data)
743 check_enable_amd_mmconf_dmi();
744
745 fam10h_check_enable_mmcfg();
746#endif
747
748 /*
749 * Disable GART TLB Walk Errors on Fam10h. We do this here because this
750 * is always needed when GART is enabled, even in a kernel which has no
751 * MCE support built in. BIOS should disable GartTlbWlk Errors already.
752 * If it doesn't, we do it here as suggested by the BKDG.
753 *
754 * Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=33012
755 */
756 msr_set_bit(MSR_AMD64_MCx_MASK(4), 10);
757
758 /*
759 * On family 10h BIOS may not have properly enabled WC+ support, causing
760 * it to be converted to CD memtype. This may result in performance
761 * degradation for certain nested-paging guests. Prevent this conversion
762 * by clearing bit 24 in MSR_AMD64_BU_CFG2.
763 *
764 * NOTE: we want to use the _safe accessors so as not to #GP kvm
765 * guests on older kvm hosts.
766 */
767 msr_clear_bit(MSR_AMD64_BU_CFG2, 24);
768
769 if (cpu_has_amd_erratum(c, amd_erratum_383))
770 set_cpu_bug(c, X86_BUG_AMD_TLB_MMATCH);
771}
772
773#define MSR_AMD64_DE_CFG 0xC0011029
774
775static void init_amd_ln(struct cpuinfo_x86 *c)
776{
777 /*
778 * Apply erratum 665 fix unconditionally so machines without a BIOS
779 * fix work.
780 */
781 msr_set_bit(MSR_AMD64_DE_CFG, 31);
782}
783
784static void init_amd_bd(struct cpuinfo_x86 *c)
785{
786 u64 value;
787
788 /* re-enable TopologyExtensions if switched off by BIOS */
789 if ((c->x86_model >= 0x10) && (c->x86_model <= 0x6f) &&
790 !cpu_has(c, X86_FEATURE_TOPOEXT)) {
791
792 if (msr_set_bit(0xc0011005, 54) > 0) {
793 rdmsrl(0xc0011005, value);
794 if (value & BIT_64(54)) {
795 set_cpu_cap(c, X86_FEATURE_TOPOEXT);
796 pr_info_once(FW_INFO "CPU: Re-enabling disabled Topology Extensions Support.\n");
797 }
798 }
799 }
800
801 /*
802 * The way access filter has a performance penalty on some workloads.
803 * Disable it on the affected CPUs.
804 */
805 if ((c->x86_model >= 0x02) && (c->x86_model < 0x20)) {
806 if (!rdmsrl_safe(MSR_F15H_IC_CFG, &value) && !(value & 0x1E)) {
807 value |= 0x1E;
808 wrmsrl_safe(MSR_F15H_IC_CFG, value);
809 }
810 }
811}
812
813static void init_amd_zn(struct cpuinfo_x86 *c)
814{
815 set_cpu_cap(c, X86_FEATURE_ZEN);
816 /*
817 * Fix erratum 1076: CPB feature bit not being set in CPUID. It affects
818 * all up to and including B1.
819 */
820 if (c->x86_model <= 1 && c->x86_stepping <= 1)
821 set_cpu_cap(c, X86_FEATURE_CPB);
822}
823
824static void init_amd(struct cpuinfo_x86 *c)
825{
826 early_init_amd(c);
827
828 /*
829 * Bit 31 in normal CPUID used for nonstandard 3DNow ID;
830 * 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway
831 */
832 clear_cpu_cap(c, 0*32+31);
833
834 if (c->x86 >= 0x10)
835 set_cpu_cap(c, X86_FEATURE_REP_GOOD);
836
837 /* get apicid instead of initial apic id from cpuid */
838 c->apicid = hard_smp_processor_id();
839
840 /* K6s reports MCEs but don't actually have all the MSRs */
841 if (c->x86 < 6)
842 clear_cpu_cap(c, X86_FEATURE_MCE);
843
844 switch (c->x86) {
845 case 4: init_amd_k5(c); break;
846 case 5: init_amd_k6(c); break;
847 case 6: init_amd_k7(c); break;
848 case 0xf: init_amd_k8(c); break;
849 case 0x10: init_amd_gh(c); break;
850 case 0x12: init_amd_ln(c); break;
851 case 0x15: init_amd_bd(c); break;
852 case 0x17: init_amd_zn(c); break;
853 }
854
855 /*
856 * Enable workaround for FXSAVE leak on CPUs
857 * without a XSaveErPtr feature
858 */
859 if ((c->x86 >= 6) && (!cpu_has(c, X86_FEATURE_XSAVEERPTR)))
860 set_cpu_bug(c, X86_BUG_FXSAVE_LEAK);
861
862 cpu_detect_cache_sizes(c);
863
864 /* Multi core CPU? */
865 if (c->extended_cpuid_level >= 0x80000008) {
866 amd_detect_cmp(c);
867 srat_detect_node(c);
868 }
869
870#ifdef CONFIG_X86_32
871 detect_ht(c);
872#endif
873
874 init_amd_cacheinfo(c);
875
876 if (c->x86 >= 0xf)
877 set_cpu_cap(c, X86_FEATURE_K8);
878
879 if (cpu_has(c, X86_FEATURE_XMM2)) {
880 unsigned long long val;
881 int ret;
882
883 /*
884 * A serializing LFENCE has less overhead than MFENCE, so
885 * use it for execution serialization. On families which
886 * don't have that MSR, LFENCE is already serializing.
887 * msr_set_bit() uses the safe accessors, too, even if the MSR
888 * is not present.
889 */
890 msr_set_bit(MSR_F10H_DECFG,
891 MSR_F10H_DECFG_LFENCE_SERIALIZE_BIT);
892
893 /*
894 * Verify that the MSR write was successful (could be running
895 * under a hypervisor) and only then assume that LFENCE is
896 * serializing.
897 */
898 ret = rdmsrl_safe(MSR_F10H_DECFG, &val);
899 if (!ret && (val & MSR_F10H_DECFG_LFENCE_SERIALIZE)) {
900 /* A serializing LFENCE stops RDTSC speculation */
901 set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
902 } else {
903 /* MFENCE stops RDTSC speculation */
904 set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC);
905 }
906 }
907
908 /*
909 * Family 0x12 and above processors have APIC timer
910 * running in deep C states.
911 */
912 if (c->x86 > 0x11)
913 set_cpu_cap(c, X86_FEATURE_ARAT);
914
915 /* 3DNow or LM implies PREFETCHW */
916 if (!cpu_has(c, X86_FEATURE_3DNOWPREFETCH))
917 if (cpu_has(c, X86_FEATURE_3DNOW) || cpu_has(c, X86_FEATURE_LM))
918 set_cpu_cap(c, X86_FEATURE_3DNOWPREFETCH);
919
920 /* AMD CPUs don't reset SS attributes on SYSRET, Xen does. */
921 if (!cpu_has(c, X86_FEATURE_XENPV))
922 set_cpu_bug(c, X86_BUG_SYSRET_SS_ATTRS);
923}
924
925#ifdef CONFIG_X86_32
926static unsigned int amd_size_cache(struct cpuinfo_x86 *c, unsigned int size)
927{
928 /* AMD errata T13 (order #21922) */
929 if ((c->x86 == 6)) {
930 /* Duron Rev A0 */
931 if (c->x86_model == 3 && c->x86_stepping == 0)
932 size = 64;
933 /* Tbird rev A1/A2 */
934 if (c->x86_model == 4 &&
935 (c->x86_stepping == 0 || c->x86_stepping == 1))
936 size = 256;
937 }
938 return size;
939}
940#endif
941
942static void cpu_detect_tlb_amd(struct cpuinfo_x86 *c)
943{
944 u32 ebx, eax, ecx, edx;
945 u16 mask = 0xfff;
946
947 if (c->x86 < 0xf)
948 return;
949
950 if (c->extended_cpuid_level < 0x80000006)
951 return;
952
953 cpuid(0x80000006, &eax, &ebx, &ecx, &edx);
954
955 tlb_lld_4k[ENTRIES] = (ebx >> 16) & mask;
956 tlb_lli_4k[ENTRIES] = ebx & mask;
957
958 /*
959 * K8 doesn't have 2M/4M entries in the L2 TLB so read out the L1 TLB
960 * characteristics from the CPUID function 0x80000005 instead.
961 */
962 if (c->x86 == 0xf) {
963 cpuid(0x80000005, &eax, &ebx, &ecx, &edx);
964 mask = 0xff;
965 }
966
967 /* Handle DTLB 2M and 4M sizes, fall back to L1 if L2 is disabled */
968 if (!((eax >> 16) & mask))
969 tlb_lld_2m[ENTRIES] = (cpuid_eax(0x80000005) >> 16) & 0xff;
970 else
971 tlb_lld_2m[ENTRIES] = (eax >> 16) & mask;
972
973 /* a 4M entry uses two 2M entries */
974 tlb_lld_4m[ENTRIES] = tlb_lld_2m[ENTRIES] >> 1;
975
976 /* Handle ITLB 2M and 4M sizes, fall back to L1 if L2 is disabled */
977 if (!(eax & mask)) {
978 /* Erratum 658 */
979 if (c->x86 == 0x15 && c->x86_model <= 0x1f) {
980 tlb_lli_2m[ENTRIES] = 1024;
981 } else {
982 cpuid(0x80000005, &eax, &ebx, &ecx, &edx);
983 tlb_lli_2m[ENTRIES] = eax & 0xff;
984 }
985 } else
986 tlb_lli_2m[ENTRIES] = eax & mask;
987
988 tlb_lli_4m[ENTRIES] = tlb_lli_2m[ENTRIES] >> 1;
989}
990
991static const struct cpu_dev amd_cpu_dev = {
992 .c_vendor = "AMD",
993 .c_ident = { "AuthenticAMD" },
994#ifdef CONFIG_X86_32
995 .legacy_models = {
996 { .family = 4, .model_names =
997 {
998 [3] = "486 DX/2",
999 [7] = "486 DX/2-WB",
1000 [8] = "486 DX/4",
1001 [9] = "486 DX/4-WB",
1002 [14] = "Am5x86-WT",
1003 [15] = "Am5x86-WB"
1004 }
1005 },
1006 },
1007 .legacy_cache_size = amd_size_cache,
1008#endif
1009 .c_early_init = early_init_amd,
1010 .c_detect_tlb = cpu_detect_tlb_amd,
1011 .c_bsp_init = bsp_init_amd,
1012 .c_init = init_amd,
1013 .c_x86_vendor = X86_VENDOR_AMD,
1014};
1015
1016cpu_dev_register(amd_cpu_dev);
1017
1018/*
1019 * AMD errata checking
1020 *
1021 * Errata are defined as arrays of ints using the AMD_LEGACY_ERRATUM() or
1022 * AMD_OSVW_ERRATUM() macros. The latter is intended for newer errata that
1023 * have an OSVW id assigned, which it takes as first argument. Both take a
1024 * variable number of family-specific model-stepping ranges created by
1025 * AMD_MODEL_RANGE().
1026 *
1027 * Example:
1028 *
1029 * const int amd_erratum_319[] =
1030 * AMD_LEGACY_ERRATUM(AMD_MODEL_RANGE(0x10, 0x2, 0x1, 0x4, 0x2),
1031 * AMD_MODEL_RANGE(0x10, 0x8, 0x0, 0x8, 0x0),
1032 * AMD_MODEL_RANGE(0x10, 0x9, 0x0, 0x9, 0x0));
1033 */
1034
1035#define AMD_LEGACY_ERRATUM(...) { -1, __VA_ARGS__, 0 }
1036#define AMD_OSVW_ERRATUM(osvw_id, ...) { osvw_id, __VA_ARGS__, 0 }
1037#define AMD_MODEL_RANGE(f, m_start, s_start, m_end, s_end) \
1038 ((f << 24) | (m_start << 16) | (s_start << 12) | (m_end << 4) | (s_end))
1039#define AMD_MODEL_RANGE_FAMILY(range) (((range) >> 24) & 0xff)
1040#define AMD_MODEL_RANGE_START(range) (((range) >> 12) & 0xfff)
1041#define AMD_MODEL_RANGE_END(range) ((range) & 0xfff)
1042
1043static const int amd_erratum_400[] =
1044 AMD_OSVW_ERRATUM(1, AMD_MODEL_RANGE(0xf, 0x41, 0x2, 0xff, 0xf),
1045 AMD_MODEL_RANGE(0x10, 0x2, 0x1, 0xff, 0xf));
1046
1047static const int amd_erratum_383[] =
1048 AMD_OSVW_ERRATUM(3, AMD_MODEL_RANGE(0x10, 0, 0, 0xff, 0xf));
1049
1050
1051static bool cpu_has_amd_erratum(struct cpuinfo_x86 *cpu, const int *erratum)
1052{
1053 int osvw_id = *erratum++;
1054 u32 range;
1055 u32 ms;
1056
1057 if (osvw_id >= 0 && osvw_id < 65536 &&
1058 cpu_has(cpu, X86_FEATURE_OSVW)) {
1059 u64 osvw_len;
1060
1061 rdmsrl(MSR_AMD64_OSVW_ID_LENGTH, osvw_len);
1062 if (osvw_id < osvw_len) {
1063 u64 osvw_bits;
1064
1065 rdmsrl(MSR_AMD64_OSVW_STATUS + (osvw_id >> 6),
1066 osvw_bits);
1067 return osvw_bits & (1ULL << (osvw_id & 0x3f));
1068 }
1069 }
1070
1071 /* OSVW unavailable or ID unknown, match family-model-stepping range */
1072 ms = (cpu->x86_model << 4) | cpu->x86_stepping;
1073 while ((range = *erratum++))
1074 if ((cpu->x86 == AMD_MODEL_RANGE_FAMILY(range)) &&
1075 (ms >= AMD_MODEL_RANGE_START(range)) &&
1076 (ms <= AMD_MODEL_RANGE_END(range)))
1077 return true;
1078
1079 return false;
1080}
1081
1082void set_dr_addr_mask(unsigned long mask, int dr)
1083{
1084 if (!boot_cpu_has(X86_FEATURE_BPEXT))
1085 return;
1086
1087 switch (dr) {
1088 case 0:
1089 wrmsr(MSR_F16H_DR0_ADDR_MASK, mask, 0);
1090 break;
1091 case 1:
1092 case 2:
1093 case 3:
1094 wrmsr(MSR_F16H_DR1_ADDR_MASK - 1 + dr, mask, 0);
1095 break;
1096 default:
1097 break;
1098 }
1099}
1// SPDX-License-Identifier: GPL-2.0-only
2#include <linux/export.h>
3#include <linux/bitops.h>
4#include <linux/elf.h>
5#include <linux/mm.h>
6
7#include <linux/io.h>
8#include <linux/sched.h>
9#include <linux/sched/clock.h>
10#include <linux/random.h>
11#include <linux/topology.h>
12#include <asm/processor.h>
13#include <asm/apic.h>
14#include <asm/cacheinfo.h>
15#include <asm/cpu.h>
16#include <asm/spec-ctrl.h>
17#include <asm/smp.h>
18#include <asm/numa.h>
19#include <asm/pci-direct.h>
20#include <asm/delay.h>
21#include <asm/debugreg.h>
22#include <asm/resctrl.h>
23
24#ifdef CONFIG_X86_64
25# include <asm/mmconfig.h>
26# include <asm/set_memory.h>
27#endif
28
29#include "cpu.h"
30
31static const int amd_erratum_383[];
32static const int amd_erratum_400[];
33static const int amd_erratum_1054[];
34static bool cpu_has_amd_erratum(struct cpuinfo_x86 *cpu, const int *erratum);
35
36/*
37 * nodes_per_socket: Stores the number of nodes per socket.
38 * Refer to Fam15h Models 00-0fh BKDG - CPUID Fn8000_001E_ECX
39 * Node Identifiers[10:8]
40 */
41static u32 nodes_per_socket = 1;
42
43static inline int rdmsrl_amd_safe(unsigned msr, unsigned long long *p)
44{
45 u32 gprs[8] = { 0 };
46 int err;
47
48 WARN_ONCE((boot_cpu_data.x86 != 0xf),
49 "%s should only be used on K8!\n", __func__);
50
51 gprs[1] = msr;
52 gprs[7] = 0x9c5a203a;
53
54 err = rdmsr_safe_regs(gprs);
55
56 *p = gprs[0] | ((u64)gprs[2] << 32);
57
58 return err;
59}
60
61static inline int wrmsrl_amd_safe(unsigned msr, unsigned long long val)
62{
63 u32 gprs[8] = { 0 };
64
65 WARN_ONCE((boot_cpu_data.x86 != 0xf),
66 "%s should only be used on K8!\n", __func__);
67
68 gprs[0] = (u32)val;
69 gprs[1] = msr;
70 gprs[2] = val >> 32;
71 gprs[7] = 0x9c5a203a;
72
73 return wrmsr_safe_regs(gprs);
74}
75
76/*
77 * B step AMD K6 before B 9730xxxx have hardware bugs that can cause
78 * misexecution of code under Linux. Owners of such processors should
79 * contact AMD for precise details and a CPU swap.
80 *
81 * See http://www.multimania.com/poulot/k6bug.html
82 * and section 2.6.2 of "AMD-K6 Processor Revision Guide - Model 6"
83 * (Publication # 21266 Issue Date: August 1998)
84 *
85 * The following test is erm.. interesting. AMD neglected to up
86 * the chip setting when fixing the bug but they also tweaked some
87 * performance at the same time..
88 */
89
90#ifdef CONFIG_X86_32
91extern __visible void vide(void);
92__asm__(".text\n"
93 ".globl vide\n"
94 ".type vide, @function\n"
95 ".align 4\n"
96 "vide: ret\n");
97#endif
98
99static void init_amd_k5(struct cpuinfo_x86 *c)
100{
101#ifdef CONFIG_X86_32
102/*
103 * General Systems BIOSen alias the cpu frequency registers
104 * of the Elan at 0x000df000. Unfortunately, one of the Linux
105 * drivers subsequently pokes it, and changes the CPU speed.
106 * Workaround : Remove the unneeded alias.
107 */
108#define CBAR (0xfffc) /* Configuration Base Address (32-bit) */
109#define CBAR_ENB (0x80000000)
110#define CBAR_KEY (0X000000CB)
111 if (c->x86_model == 9 || c->x86_model == 10) {
112 if (inl(CBAR) & CBAR_ENB)
113 outl(0 | CBAR_KEY, CBAR);
114 }
115#endif
116}
117
118static void init_amd_k6(struct cpuinfo_x86 *c)
119{
120#ifdef CONFIG_X86_32
121 u32 l, h;
122 int mbytes = get_num_physpages() >> (20-PAGE_SHIFT);
123
124 if (c->x86_model < 6) {
125 /* Based on AMD doc 20734R - June 2000 */
126 if (c->x86_model == 0) {
127 clear_cpu_cap(c, X86_FEATURE_APIC);
128 set_cpu_cap(c, X86_FEATURE_PGE);
129 }
130 return;
131 }
132
133 if (c->x86_model == 6 && c->x86_stepping == 1) {
134 const int K6_BUG_LOOP = 1000000;
135 int n;
136 void (*f_vide)(void);
137 u64 d, d2;
138
139 pr_info("AMD K6 stepping B detected - ");
140
141 /*
142 * It looks like AMD fixed the 2.6.2 bug and improved indirect
143 * calls at the same time.
144 */
145
146 n = K6_BUG_LOOP;
147 f_vide = vide;
148 OPTIMIZER_HIDE_VAR(f_vide);
149 d = rdtsc();
150 while (n--)
151 f_vide();
152 d2 = rdtsc();
153 d = d2-d;
154
155 if (d > 20*K6_BUG_LOOP)
156 pr_cont("system stability may be impaired when more than 32 MB are used.\n");
157 else
158 pr_cont("probably OK (after B9730xxxx).\n");
159 }
160
161 /* K6 with old style WHCR */
162 if (c->x86_model < 8 ||
163 (c->x86_model == 8 && c->x86_stepping < 8)) {
164 /* We can only write allocate on the low 508Mb */
165 if (mbytes > 508)
166 mbytes = 508;
167
168 rdmsr(MSR_K6_WHCR, l, h);
169 if ((l&0x0000FFFF) == 0) {
170 unsigned long flags;
171 l = (1<<0)|((mbytes/4)<<1);
172 local_irq_save(flags);
173 wbinvd();
174 wrmsr(MSR_K6_WHCR, l, h);
175 local_irq_restore(flags);
176 pr_info("Enabling old style K6 write allocation for %d Mb\n",
177 mbytes);
178 }
179 return;
180 }
181
182 if ((c->x86_model == 8 && c->x86_stepping > 7) ||
183 c->x86_model == 9 || c->x86_model == 13) {
184 /* The more serious chips .. */
185
186 if (mbytes > 4092)
187 mbytes = 4092;
188
189 rdmsr(MSR_K6_WHCR, l, h);
190 if ((l&0xFFFF0000) == 0) {
191 unsigned long flags;
192 l = ((mbytes>>2)<<22)|(1<<16);
193 local_irq_save(flags);
194 wbinvd();
195 wrmsr(MSR_K6_WHCR, l, h);
196 local_irq_restore(flags);
197 pr_info("Enabling new style K6 write allocation for %d Mb\n",
198 mbytes);
199 }
200
201 return;
202 }
203
204 if (c->x86_model == 10) {
205 /* AMD Geode LX is model 10 */
206 /* placeholder for any needed mods */
207 return;
208 }
209#endif
210}
211
212static void init_amd_k7(struct cpuinfo_x86 *c)
213{
214#ifdef CONFIG_X86_32
215 u32 l, h;
216
217 /*
218 * Bit 15 of Athlon specific MSR 15, needs to be 0
219 * to enable SSE on Palomino/Morgan/Barton CPU's.
220 * If the BIOS didn't enable it already, enable it here.
221 */
222 if (c->x86_model >= 6 && c->x86_model <= 10) {
223 if (!cpu_has(c, X86_FEATURE_XMM)) {
224 pr_info("Enabling disabled K7/SSE Support.\n");
225 msr_clear_bit(MSR_K7_HWCR, 15);
226 set_cpu_cap(c, X86_FEATURE_XMM);
227 }
228 }
229
230 /*
231 * It's been determined by AMD that Athlons since model 8 stepping 1
232 * are more robust with CLK_CTL set to 200xxxxx instead of 600xxxxx
233 * As per AMD technical note 27212 0.2
234 */
235 if ((c->x86_model == 8 && c->x86_stepping >= 1) || (c->x86_model > 8)) {
236 rdmsr(MSR_K7_CLK_CTL, l, h);
237 if ((l & 0xfff00000) != 0x20000000) {
238 pr_info("CPU: CLK_CTL MSR was %x. Reprogramming to %x\n",
239 l, ((l & 0x000fffff)|0x20000000));
240 wrmsr(MSR_K7_CLK_CTL, (l & 0x000fffff)|0x20000000, h);
241 }
242 }
243
244 /* calling is from identify_secondary_cpu() ? */
245 if (!c->cpu_index)
246 return;
247
248 /*
249 * Certain Athlons might work (for various values of 'work') in SMP
250 * but they are not certified as MP capable.
251 */
252 /* Athlon 660/661 is valid. */
253 if ((c->x86_model == 6) && ((c->x86_stepping == 0) ||
254 (c->x86_stepping == 1)))
255 return;
256
257 /* Duron 670 is valid */
258 if ((c->x86_model == 7) && (c->x86_stepping == 0))
259 return;
260
261 /*
262 * Athlon 662, Duron 671, and Athlon >model 7 have capability
263 * bit. It's worth noting that the A5 stepping (662) of some
264 * Athlon XP's have the MP bit set.
265 * See http://www.heise.de/newsticker/data/jow-18.10.01-000 for
266 * more.
267 */
268 if (((c->x86_model == 6) && (c->x86_stepping >= 2)) ||
269 ((c->x86_model == 7) && (c->x86_stepping >= 1)) ||
270 (c->x86_model > 7))
271 if (cpu_has(c, X86_FEATURE_MP))
272 return;
273
274 /* If we get here, not a certified SMP capable AMD system. */
275
276 /*
277 * Don't taint if we are running SMP kernel on a single non-MP
278 * approved Athlon
279 */
280 WARN_ONCE(1, "WARNING: This combination of AMD"
281 " processors is not suitable for SMP.\n");
282 add_taint(TAINT_CPU_OUT_OF_SPEC, LOCKDEP_NOW_UNRELIABLE);
283#endif
284}
285
286#ifdef CONFIG_NUMA
287/*
288 * To workaround broken NUMA config. Read the comment in
289 * srat_detect_node().
290 */
291static int nearby_node(int apicid)
292{
293 int i, node;
294
295 for (i = apicid - 1; i >= 0; i--) {
296 node = __apicid_to_node[i];
297 if (node != NUMA_NO_NODE && node_online(node))
298 return node;
299 }
300 for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) {
301 node = __apicid_to_node[i];
302 if (node != NUMA_NO_NODE && node_online(node))
303 return node;
304 }
305 return first_node(node_online_map); /* Shouldn't happen */
306}
307#endif
308
309/*
310 * Fix up cpu_core_id for pre-F17h systems to be in the
311 * [0 .. cores_per_node - 1] range. Not really needed but
312 * kept so as not to break existing setups.
313 */
314static void legacy_fixup_core_id(struct cpuinfo_x86 *c)
315{
316 u32 cus_per_node;
317
318 if (c->x86 >= 0x17)
319 return;
320
321 cus_per_node = c->x86_max_cores / nodes_per_socket;
322 c->cpu_core_id %= cus_per_node;
323}
324
325/*
326 * Fixup core topology information for
327 * (1) AMD multi-node processors
328 * Assumption: Number of cores in each internal node is the same.
329 * (2) AMD processors supporting compute units
330 */
331static void amd_get_topology(struct cpuinfo_x86 *c)
332{
333 u8 node_id;
334 int cpu = smp_processor_id();
335
336 /* get information required for multi-node processors */
337 if (boot_cpu_has(X86_FEATURE_TOPOEXT)) {
338 int err;
339 u32 eax, ebx, ecx, edx;
340
341 cpuid(0x8000001e, &eax, &ebx, &ecx, &edx);
342
343 node_id = ecx & 0xff;
344
345 if (c->x86 == 0x15)
346 c->cu_id = ebx & 0xff;
347
348 if (c->x86 >= 0x17) {
349 c->cpu_core_id = ebx & 0xff;
350
351 if (smp_num_siblings > 1)
352 c->x86_max_cores /= smp_num_siblings;
353 }
354
355 /*
356 * In case leaf B is available, use it to derive
357 * topology information.
358 */
359 err = detect_extended_topology(c);
360 if (!err)
361 c->x86_coreid_bits = get_count_order(c->x86_max_cores);
362
363 cacheinfo_amd_init_llc_id(c, cpu, node_id);
364
365 } else if (cpu_has(c, X86_FEATURE_NODEID_MSR)) {
366 u64 value;
367
368 rdmsrl(MSR_FAM10H_NODE_ID, value);
369 node_id = value & 7;
370
371 per_cpu(cpu_llc_id, cpu) = node_id;
372 } else
373 return;
374
375 if (nodes_per_socket > 1) {
376 set_cpu_cap(c, X86_FEATURE_AMD_DCM);
377 legacy_fixup_core_id(c);
378 }
379}
380
381/*
382 * On a AMD dual core setup the lower bits of the APIC id distinguish the cores.
383 * Assumes number of cores is a power of two.
384 */
385static void amd_detect_cmp(struct cpuinfo_x86 *c)
386{
387 unsigned bits;
388 int cpu = smp_processor_id();
389
390 bits = c->x86_coreid_bits;
391 /* Low order bits define the core id (index of core in socket) */
392 c->cpu_core_id = c->initial_apicid & ((1 << bits)-1);
393 /* Convert the initial APIC ID into the socket ID */
394 c->phys_proc_id = c->initial_apicid >> bits;
395 /* use socket ID also for last level cache */
396 per_cpu(cpu_llc_id, cpu) = c->phys_proc_id;
397}
398
399static void amd_detect_ppin(struct cpuinfo_x86 *c)
400{
401 unsigned long long val;
402
403 if (!cpu_has(c, X86_FEATURE_AMD_PPIN))
404 return;
405
406 /* When PPIN is defined in CPUID, still need to check PPIN_CTL MSR */
407 if (rdmsrl_safe(MSR_AMD_PPIN_CTL, &val))
408 goto clear_ppin;
409
410 /* PPIN is locked in disabled mode, clear feature bit */
411 if ((val & 3UL) == 1UL)
412 goto clear_ppin;
413
414 /* If PPIN is disabled, try to enable it */
415 if (!(val & 2UL)) {
416 wrmsrl_safe(MSR_AMD_PPIN_CTL, val | 2UL);
417 rdmsrl_safe(MSR_AMD_PPIN_CTL, &val);
418 }
419
420 /* If PPIN_EN bit is 1, return from here; otherwise fall through */
421 if (val & 2UL)
422 return;
423
424clear_ppin:
425 clear_cpu_cap(c, X86_FEATURE_AMD_PPIN);
426}
427
428u16 amd_get_nb_id(int cpu)
429{
430 return per_cpu(cpu_llc_id, cpu);
431}
432EXPORT_SYMBOL_GPL(amd_get_nb_id);
433
434u32 amd_get_nodes_per_socket(void)
435{
436 return nodes_per_socket;
437}
438EXPORT_SYMBOL_GPL(amd_get_nodes_per_socket);
439
440static void srat_detect_node(struct cpuinfo_x86 *c)
441{
442#ifdef CONFIG_NUMA
443 int cpu = smp_processor_id();
444 int node;
445 unsigned apicid = c->apicid;
446
447 node = numa_cpu_node(cpu);
448 if (node == NUMA_NO_NODE)
449 node = per_cpu(cpu_llc_id, cpu);
450
451 /*
452 * On multi-fabric platform (e.g. Numascale NumaChip) a
453 * platform-specific handler needs to be called to fixup some
454 * IDs of the CPU.
455 */
456 if (x86_cpuinit.fixup_cpu_id)
457 x86_cpuinit.fixup_cpu_id(c, node);
458
459 if (!node_online(node)) {
460 /*
461 * Two possibilities here:
462 *
463 * - The CPU is missing memory and no node was created. In
464 * that case try picking one from a nearby CPU.
465 *
466 * - The APIC IDs differ from the HyperTransport node IDs
467 * which the K8 northbridge parsing fills in. Assume
468 * they are all increased by a constant offset, but in
469 * the same order as the HT nodeids. If that doesn't
470 * result in a usable node fall back to the path for the
471 * previous case.
472 *
473 * This workaround operates directly on the mapping between
474 * APIC ID and NUMA node, assuming certain relationship
475 * between APIC ID, HT node ID and NUMA topology. As going
476 * through CPU mapping may alter the outcome, directly
477 * access __apicid_to_node[].
478 */
479 int ht_nodeid = c->initial_apicid;
480
481 if (__apicid_to_node[ht_nodeid] != NUMA_NO_NODE)
482 node = __apicid_to_node[ht_nodeid];
483 /* Pick a nearby node */
484 if (!node_online(node))
485 node = nearby_node(apicid);
486 }
487 numa_set_node(cpu, node);
488#endif
489}
490
491static void early_init_amd_mc(struct cpuinfo_x86 *c)
492{
493#ifdef CONFIG_SMP
494 unsigned bits, ecx;
495
496 /* Multi core CPU? */
497 if (c->extended_cpuid_level < 0x80000008)
498 return;
499
500 ecx = cpuid_ecx(0x80000008);
501
502 c->x86_max_cores = (ecx & 0xff) + 1;
503
504 /* CPU telling us the core id bits shift? */
505 bits = (ecx >> 12) & 0xF;
506
507 /* Otherwise recompute */
508 if (bits == 0) {
509 while ((1 << bits) < c->x86_max_cores)
510 bits++;
511 }
512
513 c->x86_coreid_bits = bits;
514#endif
515}
516
517static void bsp_init_amd(struct cpuinfo_x86 *c)
518{
519
520#ifdef CONFIG_X86_64
521 if (c->x86 >= 0xf) {
522 unsigned long long tseg;
523
524 /*
525 * Split up direct mapping around the TSEG SMM area.
526 * Don't do it for gbpages because there seems very little
527 * benefit in doing so.
528 */
529 if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg)) {
530 unsigned long pfn = tseg >> PAGE_SHIFT;
531
532 pr_debug("tseg: %010llx\n", tseg);
533 if (pfn_range_is_mapped(pfn, pfn + 1))
534 set_memory_4k((unsigned long)__va(tseg), 1);
535 }
536 }
537#endif
538
539 if (cpu_has(c, X86_FEATURE_CONSTANT_TSC)) {
540
541 if (c->x86 > 0x10 ||
542 (c->x86 == 0x10 && c->x86_model >= 0x2)) {
543 u64 val;
544
545 rdmsrl(MSR_K7_HWCR, val);
546 if (!(val & BIT(24)))
547 pr_warn(FW_BUG "TSC doesn't count with P0 frequency!\n");
548 }
549 }
550
551 if (c->x86 == 0x15) {
552 unsigned long upperbit;
553 u32 cpuid, assoc;
554
555 cpuid = cpuid_edx(0x80000005);
556 assoc = cpuid >> 16 & 0xff;
557 upperbit = ((cpuid >> 24) << 10) / assoc;
558
559 va_align.mask = (upperbit - 1) & PAGE_MASK;
560 va_align.flags = ALIGN_VA_32 | ALIGN_VA_64;
561
562 /* A random value per boot for bit slice [12:upper_bit) */
563 va_align.bits = get_random_int() & va_align.mask;
564 }
565
566 if (cpu_has(c, X86_FEATURE_MWAITX))
567 use_mwaitx_delay();
568
569 if (boot_cpu_has(X86_FEATURE_TOPOEXT)) {
570 u32 ecx;
571
572 ecx = cpuid_ecx(0x8000001e);
573 nodes_per_socket = ((ecx >> 8) & 7) + 1;
574 } else if (boot_cpu_has(X86_FEATURE_NODEID_MSR)) {
575 u64 value;
576
577 rdmsrl(MSR_FAM10H_NODE_ID, value);
578 nodes_per_socket = ((value >> 3) & 7) + 1;
579 }
580
581 if (!boot_cpu_has(X86_FEATURE_AMD_SSBD) &&
582 !boot_cpu_has(X86_FEATURE_VIRT_SSBD) &&
583 c->x86 >= 0x15 && c->x86 <= 0x17) {
584 unsigned int bit;
585
586 switch (c->x86) {
587 case 0x15: bit = 54; break;
588 case 0x16: bit = 33; break;
589 case 0x17: bit = 10; break;
590 default: return;
591 }
592 /*
593 * Try to cache the base value so further operations can
594 * avoid RMW. If that faults, do not enable SSBD.
595 */
596 if (!rdmsrl_safe(MSR_AMD64_LS_CFG, &x86_amd_ls_cfg_base)) {
597 setup_force_cpu_cap(X86_FEATURE_LS_CFG_SSBD);
598 setup_force_cpu_cap(X86_FEATURE_SSBD);
599 x86_amd_ls_cfg_ssbd_mask = 1ULL << bit;
600 }
601 }
602
603 resctrl_cpu_detect(c);
604}
605
606static void early_detect_mem_encrypt(struct cpuinfo_x86 *c)
607{
608 u64 msr;
609
610 /*
611 * BIOS support is required for SME and SEV.
612 * For SME: If BIOS has enabled SME then adjust x86_phys_bits by
613 * the SME physical address space reduction value.
614 * If BIOS has not enabled SME then don't advertise the
615 * SME feature (set in scattered.c).
616 * For SEV: If BIOS has not enabled SEV then don't advertise the
617 * SEV feature (set in scattered.c).
618 *
619 * In all cases, since support for SME and SEV requires long mode,
620 * don't advertise the feature under CONFIG_X86_32.
621 */
622 if (cpu_has(c, X86_FEATURE_SME) || cpu_has(c, X86_FEATURE_SEV)) {
623 /* Check if memory encryption is enabled */
624 rdmsrl(MSR_K8_SYSCFG, msr);
625 if (!(msr & MSR_K8_SYSCFG_MEM_ENCRYPT))
626 goto clear_all;
627
628 /*
629 * Always adjust physical address bits. Even though this
630 * will be a value above 32-bits this is still done for
631 * CONFIG_X86_32 so that accurate values are reported.
632 */
633 c->x86_phys_bits -= (cpuid_ebx(0x8000001f) >> 6) & 0x3f;
634
635 if (IS_ENABLED(CONFIG_X86_32))
636 goto clear_all;
637
638 rdmsrl(MSR_K7_HWCR, msr);
639 if (!(msr & MSR_K7_HWCR_SMMLOCK))
640 goto clear_sev;
641
642 return;
643
644clear_all:
645 setup_clear_cpu_cap(X86_FEATURE_SME);
646clear_sev:
647 setup_clear_cpu_cap(X86_FEATURE_SEV);
648 }
649}
650
651static void early_init_amd(struct cpuinfo_x86 *c)
652{
653 u64 value;
654 u32 dummy;
655
656 early_init_amd_mc(c);
657
658#ifdef CONFIG_X86_32
659 if (c->x86 == 6)
660 set_cpu_cap(c, X86_FEATURE_K7);
661#endif
662
663 if (c->x86 >= 0xf)
664 set_cpu_cap(c, X86_FEATURE_K8);
665
666 rdmsr_safe(MSR_AMD64_PATCH_LEVEL, &c->microcode, &dummy);
667
668 /*
669 * c->x86_power is 8000_0007 edx. Bit 8 is TSC runs at constant rate
670 * with P/T states and does not stop in deep C-states
671 */
672 if (c->x86_power & (1 << 8)) {
673 set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
674 set_cpu_cap(c, X86_FEATURE_NONSTOP_TSC);
675 }
676
677 /* Bit 12 of 8000_0007 edx is accumulated power mechanism. */
678 if (c->x86_power & BIT(12))
679 set_cpu_cap(c, X86_FEATURE_ACC_POWER);
680
681#ifdef CONFIG_X86_64
682 set_cpu_cap(c, X86_FEATURE_SYSCALL32);
683#else
684 /* Set MTRR capability flag if appropriate */
685 if (c->x86 == 5)
686 if (c->x86_model == 13 || c->x86_model == 9 ||
687 (c->x86_model == 8 && c->x86_stepping >= 8))
688 set_cpu_cap(c, X86_FEATURE_K6_MTRR);
689#endif
690#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_PCI)
691 /*
692 * ApicID can always be treated as an 8-bit value for AMD APIC versions
693 * >= 0x10, but even old K8s came out of reset with version 0x10. So, we
694 * can safely set X86_FEATURE_EXTD_APICID unconditionally for families
695 * after 16h.
696 */
697 if (boot_cpu_has(X86_FEATURE_APIC)) {
698 if (c->x86 > 0x16)
699 set_cpu_cap(c, X86_FEATURE_EXTD_APICID);
700 else if (c->x86 >= 0xf) {
701 /* check CPU config space for extended APIC ID */
702 unsigned int val;
703
704 val = read_pci_config(0, 24, 0, 0x68);
705 if ((val >> 17 & 0x3) == 0x3)
706 set_cpu_cap(c, X86_FEATURE_EXTD_APICID);
707 }
708 }
709#endif
710
711 /*
712 * This is only needed to tell the kernel whether to use VMCALL
713 * and VMMCALL. VMMCALL is never executed except under virt, so
714 * we can set it unconditionally.
715 */
716 set_cpu_cap(c, X86_FEATURE_VMMCALL);
717
718 /* F16h erratum 793, CVE-2013-6885 */
719 if (c->x86 == 0x16 && c->x86_model <= 0xf)
720 msr_set_bit(MSR_AMD64_LS_CFG, 15);
721
722 /*
723 * Check whether the machine is affected by erratum 400. This is
724 * used to select the proper idle routine and to enable the check
725 * whether the machine is affected in arch_post_acpi_init(), which
726 * sets the X86_BUG_AMD_APIC_C1E bug depending on the MSR check.
727 */
728 if (cpu_has_amd_erratum(c, amd_erratum_400))
729 set_cpu_bug(c, X86_BUG_AMD_E400);
730
731 early_detect_mem_encrypt(c);
732
733 /* Re-enable TopologyExtensions if switched off by BIOS */
734 if (c->x86 == 0x15 &&
735 (c->x86_model >= 0x10 && c->x86_model <= 0x6f) &&
736 !cpu_has(c, X86_FEATURE_TOPOEXT)) {
737
738 if (msr_set_bit(0xc0011005, 54) > 0) {
739 rdmsrl(0xc0011005, value);
740 if (value & BIT_64(54)) {
741 set_cpu_cap(c, X86_FEATURE_TOPOEXT);
742 pr_info_once(FW_INFO "CPU: Re-enabling disabled Topology Extensions Support.\n");
743 }
744 }
745 }
746
747 if (cpu_has(c, X86_FEATURE_TOPOEXT))
748 smp_num_siblings = ((cpuid_ebx(0x8000001e) >> 8) & 0xff) + 1;
749}
750
751static void init_amd_k8(struct cpuinfo_x86 *c)
752{
753 u32 level;
754 u64 value;
755
756 /* On C+ stepping K8 rep microcode works well for copy/memset */
757 level = cpuid_eax(1);
758 if ((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58)
759 set_cpu_cap(c, X86_FEATURE_REP_GOOD);
760
761 /*
762 * Some BIOSes incorrectly force this feature, but only K8 revision D
763 * (model = 0x14) and later actually support it.
764 * (AMD Erratum #110, docId: 25759).
765 */
766 if (c->x86_model < 0x14 && cpu_has(c, X86_FEATURE_LAHF_LM)) {
767 clear_cpu_cap(c, X86_FEATURE_LAHF_LM);
768 if (!rdmsrl_amd_safe(0xc001100d, &value)) {
769 value &= ~BIT_64(32);
770 wrmsrl_amd_safe(0xc001100d, value);
771 }
772 }
773
774 if (!c->x86_model_id[0])
775 strcpy(c->x86_model_id, "Hammer");
776
777#ifdef CONFIG_SMP
778 /*
779 * Disable TLB flush filter by setting HWCR.FFDIS on K8
780 * bit 6 of msr C001_0015
781 *
782 * Errata 63 for SH-B3 steppings
783 * Errata 122 for all steppings (F+ have it disabled by default)
784 */
785 msr_set_bit(MSR_K7_HWCR, 6);
786#endif
787 set_cpu_bug(c, X86_BUG_SWAPGS_FENCE);
788}
789
790static void init_amd_gh(struct cpuinfo_x86 *c)
791{
792#ifdef CONFIG_MMCONF_FAM10H
793 /* do this for boot cpu */
794 if (c == &boot_cpu_data)
795 check_enable_amd_mmconf_dmi();
796
797 fam10h_check_enable_mmcfg();
798#endif
799
800 /*
801 * Disable GART TLB Walk Errors on Fam10h. We do this here because this
802 * is always needed when GART is enabled, even in a kernel which has no
803 * MCE support built in. BIOS should disable GartTlbWlk Errors already.
804 * If it doesn't, we do it here as suggested by the BKDG.
805 *
806 * Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=33012
807 */
808 msr_set_bit(MSR_AMD64_MCx_MASK(4), 10);
809
810 /*
811 * On family 10h BIOS may not have properly enabled WC+ support, causing
812 * it to be converted to CD memtype. This may result in performance
813 * degradation for certain nested-paging guests. Prevent this conversion
814 * by clearing bit 24 in MSR_AMD64_BU_CFG2.
815 *
816 * NOTE: we want to use the _safe accessors so as not to #GP kvm
817 * guests on older kvm hosts.
818 */
819 msr_clear_bit(MSR_AMD64_BU_CFG2, 24);
820
821 if (cpu_has_amd_erratum(c, amd_erratum_383))
822 set_cpu_bug(c, X86_BUG_AMD_TLB_MMATCH);
823}
824
825#define MSR_AMD64_DE_CFG 0xC0011029
826
827static void init_amd_ln(struct cpuinfo_x86 *c)
828{
829 /*
830 * Apply erratum 665 fix unconditionally so machines without a BIOS
831 * fix work.
832 */
833 msr_set_bit(MSR_AMD64_DE_CFG, 31);
834}
835
836static bool rdrand_force;
837
838static int __init rdrand_cmdline(char *str)
839{
840 if (!str)
841 return -EINVAL;
842
843 if (!strcmp(str, "force"))
844 rdrand_force = true;
845 else
846 return -EINVAL;
847
848 return 0;
849}
850early_param("rdrand", rdrand_cmdline);
851
852static void clear_rdrand_cpuid_bit(struct cpuinfo_x86 *c)
853{
854 /*
855 * Saving of the MSR used to hide the RDRAND support during
856 * suspend/resume is done by arch/x86/power/cpu.c, which is
857 * dependent on CONFIG_PM_SLEEP.
858 */
859 if (!IS_ENABLED(CONFIG_PM_SLEEP))
860 return;
861
862 /*
863 * The nordrand option can clear X86_FEATURE_RDRAND, so check for
864 * RDRAND support using the CPUID function directly.
865 */
866 if (!(cpuid_ecx(1) & BIT(30)) || rdrand_force)
867 return;
868
869 msr_clear_bit(MSR_AMD64_CPUID_FN_1, 62);
870
871 /*
872 * Verify that the CPUID change has occurred in case the kernel is
873 * running virtualized and the hypervisor doesn't support the MSR.
874 */
875 if (cpuid_ecx(1) & BIT(30)) {
876 pr_info_once("BIOS may not properly restore RDRAND after suspend, but hypervisor does not support hiding RDRAND via CPUID.\n");
877 return;
878 }
879
880 clear_cpu_cap(c, X86_FEATURE_RDRAND);
881 pr_info_once("BIOS may not properly restore RDRAND after suspend, hiding RDRAND via CPUID. Use rdrand=force to reenable.\n");
882}
883
884static void init_amd_jg(struct cpuinfo_x86 *c)
885{
886 /*
887 * Some BIOS implementations do not restore proper RDRAND support
888 * across suspend and resume. Check on whether to hide the RDRAND
889 * instruction support via CPUID.
890 */
891 clear_rdrand_cpuid_bit(c);
892}
893
894static void init_amd_bd(struct cpuinfo_x86 *c)
895{
896 u64 value;
897
898 /*
899 * The way access filter has a performance penalty on some workloads.
900 * Disable it on the affected CPUs.
901 */
902 if ((c->x86_model >= 0x02) && (c->x86_model < 0x20)) {
903 if (!rdmsrl_safe(MSR_F15H_IC_CFG, &value) && !(value & 0x1E)) {
904 value |= 0x1E;
905 wrmsrl_safe(MSR_F15H_IC_CFG, value);
906 }
907 }
908
909 /*
910 * Some BIOS implementations do not restore proper RDRAND support
911 * across suspend and resume. Check on whether to hide the RDRAND
912 * instruction support via CPUID.
913 */
914 clear_rdrand_cpuid_bit(c);
915}
916
917static void init_amd_zn(struct cpuinfo_x86 *c)
918{
919 set_cpu_cap(c, X86_FEATURE_ZEN);
920
921#ifdef CONFIG_NUMA
922 node_reclaim_distance = 32;
923#endif
924
925 /*
926 * Fix erratum 1076: CPB feature bit not being set in CPUID.
927 * Always set it, except when running under a hypervisor.
928 */
929 if (!cpu_has(c, X86_FEATURE_HYPERVISOR) && !cpu_has(c, X86_FEATURE_CPB))
930 set_cpu_cap(c, X86_FEATURE_CPB);
931}
932
933static void init_amd(struct cpuinfo_x86 *c)
934{
935 early_init_amd(c);
936
937 /*
938 * Bit 31 in normal CPUID used for nonstandard 3DNow ID;
939 * 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway
940 */
941 clear_cpu_cap(c, 0*32+31);
942
943 if (c->x86 >= 0x10)
944 set_cpu_cap(c, X86_FEATURE_REP_GOOD);
945
946 /* get apicid instead of initial apic id from cpuid */
947 c->apicid = hard_smp_processor_id();
948
949 /* K6s reports MCEs but don't actually have all the MSRs */
950 if (c->x86 < 6)
951 clear_cpu_cap(c, X86_FEATURE_MCE);
952
953 switch (c->x86) {
954 case 4: init_amd_k5(c); break;
955 case 5: init_amd_k6(c); break;
956 case 6: init_amd_k7(c); break;
957 case 0xf: init_amd_k8(c); break;
958 case 0x10: init_amd_gh(c); break;
959 case 0x12: init_amd_ln(c); break;
960 case 0x15: init_amd_bd(c); break;
961 case 0x16: init_amd_jg(c); break;
962 case 0x17: fallthrough;
963 case 0x19: init_amd_zn(c); break;
964 }
965
966 /*
967 * Enable workaround for FXSAVE leak on CPUs
968 * without a XSaveErPtr feature
969 */
970 if ((c->x86 >= 6) && (!cpu_has(c, X86_FEATURE_XSAVEERPTR)))
971 set_cpu_bug(c, X86_BUG_FXSAVE_LEAK);
972
973 cpu_detect_cache_sizes(c);
974
975 amd_detect_cmp(c);
976 amd_get_topology(c);
977 srat_detect_node(c);
978 amd_detect_ppin(c);
979
980 init_amd_cacheinfo(c);
981
982 if (cpu_has(c, X86_FEATURE_XMM2)) {
983 /*
984 * Use LFENCE for execution serialization. On families which
985 * don't have that MSR, LFENCE is already serializing.
986 * msr_set_bit() uses the safe accessors, too, even if the MSR
987 * is not present.
988 */
989 msr_set_bit(MSR_F10H_DECFG,
990 MSR_F10H_DECFG_LFENCE_SERIALIZE_BIT);
991
992 /* A serializing LFENCE stops RDTSC speculation */
993 set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
994 }
995
996 /*
997 * Family 0x12 and above processors have APIC timer
998 * running in deep C states.
999 */
1000 if (c->x86 > 0x11)
1001 set_cpu_cap(c, X86_FEATURE_ARAT);
1002
1003 /* 3DNow or LM implies PREFETCHW */
1004 if (!cpu_has(c, X86_FEATURE_3DNOWPREFETCH))
1005 if (cpu_has(c, X86_FEATURE_3DNOW) || cpu_has(c, X86_FEATURE_LM))
1006 set_cpu_cap(c, X86_FEATURE_3DNOWPREFETCH);
1007
1008 /* AMD CPUs don't reset SS attributes on SYSRET, Xen does. */
1009 if (!cpu_has(c, X86_FEATURE_XENPV))
1010 set_cpu_bug(c, X86_BUG_SYSRET_SS_ATTRS);
1011
1012 /*
1013 * Turn on the Instructions Retired free counter on machines not
1014 * susceptible to erratum #1054 "Instructions Retired Performance
1015 * Counter May Be Inaccurate".
1016 */
1017 if (cpu_has(c, X86_FEATURE_IRPERF) &&
1018 !cpu_has_amd_erratum(c, amd_erratum_1054))
1019 msr_set_bit(MSR_K7_HWCR, MSR_K7_HWCR_IRPERF_EN_BIT);
1020}
1021
1022#ifdef CONFIG_X86_32
1023static unsigned int amd_size_cache(struct cpuinfo_x86 *c, unsigned int size)
1024{
1025 /* AMD errata T13 (order #21922) */
1026 if (c->x86 == 6) {
1027 /* Duron Rev A0 */
1028 if (c->x86_model == 3 && c->x86_stepping == 0)
1029 size = 64;
1030 /* Tbird rev A1/A2 */
1031 if (c->x86_model == 4 &&
1032 (c->x86_stepping == 0 || c->x86_stepping == 1))
1033 size = 256;
1034 }
1035 return size;
1036}
1037#endif
1038
1039static void cpu_detect_tlb_amd(struct cpuinfo_x86 *c)
1040{
1041 u32 ebx, eax, ecx, edx;
1042 u16 mask = 0xfff;
1043
1044 if (c->x86 < 0xf)
1045 return;
1046
1047 if (c->extended_cpuid_level < 0x80000006)
1048 return;
1049
1050 cpuid(0x80000006, &eax, &ebx, &ecx, &edx);
1051
1052 tlb_lld_4k[ENTRIES] = (ebx >> 16) & mask;
1053 tlb_lli_4k[ENTRIES] = ebx & mask;
1054
1055 /*
1056 * K8 doesn't have 2M/4M entries in the L2 TLB so read out the L1 TLB
1057 * characteristics from the CPUID function 0x80000005 instead.
1058 */
1059 if (c->x86 == 0xf) {
1060 cpuid(0x80000005, &eax, &ebx, &ecx, &edx);
1061 mask = 0xff;
1062 }
1063
1064 /* Handle DTLB 2M and 4M sizes, fall back to L1 if L2 is disabled */
1065 if (!((eax >> 16) & mask))
1066 tlb_lld_2m[ENTRIES] = (cpuid_eax(0x80000005) >> 16) & 0xff;
1067 else
1068 tlb_lld_2m[ENTRIES] = (eax >> 16) & mask;
1069
1070 /* a 4M entry uses two 2M entries */
1071 tlb_lld_4m[ENTRIES] = tlb_lld_2m[ENTRIES] >> 1;
1072
1073 /* Handle ITLB 2M and 4M sizes, fall back to L1 if L2 is disabled */
1074 if (!(eax & mask)) {
1075 /* Erratum 658 */
1076 if (c->x86 == 0x15 && c->x86_model <= 0x1f) {
1077 tlb_lli_2m[ENTRIES] = 1024;
1078 } else {
1079 cpuid(0x80000005, &eax, &ebx, &ecx, &edx);
1080 tlb_lli_2m[ENTRIES] = eax & 0xff;
1081 }
1082 } else
1083 tlb_lli_2m[ENTRIES] = eax & mask;
1084
1085 tlb_lli_4m[ENTRIES] = tlb_lli_2m[ENTRIES] >> 1;
1086}
1087
1088static const struct cpu_dev amd_cpu_dev = {
1089 .c_vendor = "AMD",
1090 .c_ident = { "AuthenticAMD" },
1091#ifdef CONFIG_X86_32
1092 .legacy_models = {
1093 { .family = 4, .model_names =
1094 {
1095 [3] = "486 DX/2",
1096 [7] = "486 DX/2-WB",
1097 [8] = "486 DX/4",
1098 [9] = "486 DX/4-WB",
1099 [14] = "Am5x86-WT",
1100 [15] = "Am5x86-WB"
1101 }
1102 },
1103 },
1104 .legacy_cache_size = amd_size_cache,
1105#endif
1106 .c_early_init = early_init_amd,
1107 .c_detect_tlb = cpu_detect_tlb_amd,
1108 .c_bsp_init = bsp_init_amd,
1109 .c_init = init_amd,
1110 .c_x86_vendor = X86_VENDOR_AMD,
1111};
1112
1113cpu_dev_register(amd_cpu_dev);
1114
1115/*
1116 * AMD errata checking
1117 *
1118 * Errata are defined as arrays of ints using the AMD_LEGACY_ERRATUM() or
1119 * AMD_OSVW_ERRATUM() macros. The latter is intended for newer errata that
1120 * have an OSVW id assigned, which it takes as first argument. Both take a
1121 * variable number of family-specific model-stepping ranges created by
1122 * AMD_MODEL_RANGE().
1123 *
1124 * Example:
1125 *
1126 * const int amd_erratum_319[] =
1127 * AMD_LEGACY_ERRATUM(AMD_MODEL_RANGE(0x10, 0x2, 0x1, 0x4, 0x2),
1128 * AMD_MODEL_RANGE(0x10, 0x8, 0x0, 0x8, 0x0),
1129 * AMD_MODEL_RANGE(0x10, 0x9, 0x0, 0x9, 0x0));
1130 */
1131
1132#define AMD_LEGACY_ERRATUM(...) { -1, __VA_ARGS__, 0 }
1133#define AMD_OSVW_ERRATUM(osvw_id, ...) { osvw_id, __VA_ARGS__, 0 }
1134#define AMD_MODEL_RANGE(f, m_start, s_start, m_end, s_end) \
1135 ((f << 24) | (m_start << 16) | (s_start << 12) | (m_end << 4) | (s_end))
1136#define AMD_MODEL_RANGE_FAMILY(range) (((range) >> 24) & 0xff)
1137#define AMD_MODEL_RANGE_START(range) (((range) >> 12) & 0xfff)
1138#define AMD_MODEL_RANGE_END(range) ((range) & 0xfff)
1139
1140static const int amd_erratum_400[] =
1141 AMD_OSVW_ERRATUM(1, AMD_MODEL_RANGE(0xf, 0x41, 0x2, 0xff, 0xf),
1142 AMD_MODEL_RANGE(0x10, 0x2, 0x1, 0xff, 0xf));
1143
1144static const int amd_erratum_383[] =
1145 AMD_OSVW_ERRATUM(3, AMD_MODEL_RANGE(0x10, 0, 0, 0xff, 0xf));
1146
1147/* #1054: Instructions Retired Performance Counter May Be Inaccurate */
1148static const int amd_erratum_1054[] =
1149 AMD_LEGACY_ERRATUM(AMD_MODEL_RANGE(0x17, 0, 0, 0x2f, 0xf));
1150
1151static bool cpu_has_amd_erratum(struct cpuinfo_x86 *cpu, const int *erratum)
1152{
1153 int osvw_id = *erratum++;
1154 u32 range;
1155 u32 ms;
1156
1157 if (osvw_id >= 0 && osvw_id < 65536 &&
1158 cpu_has(cpu, X86_FEATURE_OSVW)) {
1159 u64 osvw_len;
1160
1161 rdmsrl(MSR_AMD64_OSVW_ID_LENGTH, osvw_len);
1162 if (osvw_id < osvw_len) {
1163 u64 osvw_bits;
1164
1165 rdmsrl(MSR_AMD64_OSVW_STATUS + (osvw_id >> 6),
1166 osvw_bits);
1167 return osvw_bits & (1ULL << (osvw_id & 0x3f));
1168 }
1169 }
1170
1171 /* OSVW unavailable or ID unknown, match family-model-stepping range */
1172 ms = (cpu->x86_model << 4) | cpu->x86_stepping;
1173 while ((range = *erratum++))
1174 if ((cpu->x86 == AMD_MODEL_RANGE_FAMILY(range)) &&
1175 (ms >= AMD_MODEL_RANGE_START(range)) &&
1176 (ms <= AMD_MODEL_RANGE_END(range)))
1177 return true;
1178
1179 return false;
1180}
1181
1182void set_dr_addr_mask(unsigned long mask, int dr)
1183{
1184 if (!boot_cpu_has(X86_FEATURE_BPEXT))
1185 return;
1186
1187 switch (dr) {
1188 case 0:
1189 wrmsr(MSR_F16H_DR0_ADDR_MASK, mask, 0);
1190 break;
1191 case 1:
1192 case 2:
1193 case 3:
1194 wrmsr(MSR_F16H_DR1_ADDR_MASK - 1 + dr, mask, 0);
1195 break;
1196 default:
1197 break;
1198 }
1199}