Loading...
1// SPDX-License-Identifier: GPL-2.0
2/dts-v1/;
3
4#include "skeleton.dtsi"
5
6#include <dt-bindings/clock/qcom,gcc-apq8084.h>
7#include <dt-bindings/gpio/gpio.h>
8
9/ {
10 model = "Qualcomm APQ 8084";
11 compatible = "qcom,apq8084";
12 interrupt-parent = <&intc>;
13
14 reserved-memory {
15 #address-cells = <1>;
16 #size-cells = <1>;
17 ranges;
18
19 smem_mem: smem_region@fa00000 {
20 reg = <0xfa00000 0x200000>;
21 no-map;
22 };
23 };
24
25 cpus {
26 #address-cells = <1>;
27 #size-cells = <0>;
28
29 cpu@0 {
30 device_type = "cpu";
31 compatible = "qcom,krait";
32 reg = <0>;
33 enable-method = "qcom,kpss-acc-v2";
34 next-level-cache = <&L2>;
35 qcom,acc = <&acc0>;
36 qcom,saw = <&saw0>;
37 cpu-idle-states = <&CPU_SPC>;
38 };
39
40 cpu@1 {
41 device_type = "cpu";
42 compatible = "qcom,krait";
43 reg = <1>;
44 enable-method = "qcom,kpss-acc-v2";
45 next-level-cache = <&L2>;
46 qcom,acc = <&acc1>;
47 qcom,saw = <&saw1>;
48 cpu-idle-states = <&CPU_SPC>;
49 };
50
51 cpu@2 {
52 device_type = "cpu";
53 compatible = "qcom,krait";
54 reg = <2>;
55 enable-method = "qcom,kpss-acc-v2";
56 next-level-cache = <&L2>;
57 qcom,acc = <&acc2>;
58 qcom,saw = <&saw2>;
59 cpu-idle-states = <&CPU_SPC>;
60 };
61
62 cpu@3 {
63 device_type = "cpu";
64 compatible = "qcom,krait";
65 reg = <3>;
66 enable-method = "qcom,kpss-acc-v2";
67 next-level-cache = <&L2>;
68 qcom,acc = <&acc3>;
69 qcom,saw = <&saw3>;
70 cpu-idle-states = <&CPU_SPC>;
71 };
72
73 L2: l2-cache {
74 compatible = "qcom,arch-cache";
75 cache-level = <2>;
76 qcom,saw = <&saw_l2>;
77 };
78
79 idle-states {
80 CPU_SPC: spc {
81 compatible = "qcom,idle-state-spc",
82 "arm,idle-state";
83 entry-latency-us = <150>;
84 exit-latency-us = <200>;
85 min-residency-us = <2000>;
86 };
87 };
88 };
89
90 firmware {
91 scm {
92 compatible = "qcom,scm";
93 clocks = <&gcc GCC_CE1_CLK> , <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
94 clock-names = "core", "bus", "iface";
95 };
96 };
97
98 thermal-zones {
99 cpu-thermal0 {
100 polling-delay-passive = <250>;
101 polling-delay = <1000>;
102
103 thermal-sensors = <&tsens 5>;
104
105 trips {
106 cpu_alert0: trip0 {
107 temperature = <75000>;
108 hysteresis = <2000>;
109 type = "passive";
110 };
111 cpu_crit0: trip1 {
112 temperature = <110000>;
113 hysteresis = <2000>;
114 type = "critical";
115 };
116 };
117 };
118
119 cpu-thermal1 {
120 polling-delay-passive = <250>;
121 polling-delay = <1000>;
122
123 thermal-sensors = <&tsens 6>;
124
125 trips {
126 cpu_alert1: trip0 {
127 temperature = <75000>;
128 hysteresis = <2000>;
129 type = "passive";
130 };
131 cpu_crit1: trip1 {
132 temperature = <110000>;
133 hysteresis = <2000>;
134 type = "critical";
135 };
136 };
137 };
138
139 cpu-thermal2 {
140 polling-delay-passive = <250>;
141 polling-delay = <1000>;
142
143 thermal-sensors = <&tsens 7>;
144
145 trips {
146 cpu_alert2: trip0 {
147 temperature = <75000>;
148 hysteresis = <2000>;
149 type = "passive";
150 };
151 cpu_crit2: trip1 {
152 temperature = <110000>;
153 hysteresis = <2000>;
154 type = "critical";
155 };
156 };
157 };
158
159 cpu-thermal3 {
160 polling-delay-passive = <250>;
161 polling-delay = <1000>;
162
163 thermal-sensors = <&tsens 8>;
164
165 trips {
166 cpu_alert3: trip0 {
167 temperature = <75000>;
168 hysteresis = <2000>;
169 type = "passive";
170 };
171 cpu_crit3: trip1 {
172 temperature = <110000>;
173 hysteresis = <2000>;
174 type = "critical";
175 };
176 };
177 };
178 };
179
180 cpu-pmu {
181 compatible = "qcom,krait-pmu";
182 interrupts = <1 7 0xf04>;
183 };
184
185 clocks {
186 xo_board: xo_board {
187 compatible = "fixed-clock";
188 #clock-cells = <0>;
189 clock-frequency = <19200000>;
190 };
191
192 sleep_clk: sleep_clk {
193 compatible = "fixed-clock";
194 #clock-cells = <0>;
195 clock-frequency = <32768>;
196 };
197 };
198
199 timer {
200 compatible = "arm,armv7-timer";
201 interrupts = <1 2 0xf08>,
202 <1 3 0xf08>,
203 <1 4 0xf08>,
204 <1 1 0xf08>;
205 clock-frequency = <19200000>;
206 };
207
208 smem {
209 compatible = "qcom,smem";
210
211 qcom,rpm-msg-ram = <&rpm_msg_ram>;
212 memory-region = <&smem_mem>;
213
214 hwlocks = <&tcsr_mutex 3>;
215 };
216
217 soc: soc {
218 #address-cells = <1>;
219 #size-cells = <1>;
220 ranges;
221 compatible = "simple-bus";
222
223 intc: interrupt-controller@f9000000 {
224 compatible = "qcom,msm-qgic2";
225 interrupt-controller;
226 #interrupt-cells = <3>;
227 reg = <0xf9000000 0x1000>,
228 <0xf9002000 0x1000>;
229 };
230
231 apcs: syscon@f9011000 {
232 compatible = "syscon";
233 reg = <0xf9011000 0x1000>;
234 };
235
236 qfprom: qfprom@fc4bc000 {
237 #address-cells = <1>;
238 #size-cells = <1>;
239 compatible = "qcom,qfprom";
240 reg = <0xfc4bc000 0x1000>;
241 tsens_calib: calib@d0 {
242 reg = <0xd0 0x18>;
243 };
244 tsens_backup: backup@440 {
245 reg = <0x440 0x10>;
246 };
247 };
248
249 tsens: thermal-sensor@fc4a8000 {
250 compatible = "qcom,msm8974-tsens";
251 reg = <0xfc4a8000 0x2000>;
252 nvmem-cells = <&tsens_calib>, <&tsens_backup>;
253 nvmem-cell-names = "calib", "calib_backup";
254 #thermal-sensor-cells = <1>;
255 };
256
257 timer@f9020000 {
258 #address-cells = <1>;
259 #size-cells = <1>;
260 ranges;
261 compatible = "arm,armv7-timer-mem";
262 reg = <0xf9020000 0x1000>;
263 clock-frequency = <19200000>;
264
265 frame@f9021000 {
266 frame-number = <0>;
267 interrupts = <0 8 0x4>,
268 <0 7 0x4>;
269 reg = <0xf9021000 0x1000>,
270 <0xf9022000 0x1000>;
271 };
272
273 frame@f9023000 {
274 frame-number = <1>;
275 interrupts = <0 9 0x4>;
276 reg = <0xf9023000 0x1000>;
277 status = "disabled";
278 };
279
280 frame@f9024000 {
281 frame-number = <2>;
282 interrupts = <0 10 0x4>;
283 reg = <0xf9024000 0x1000>;
284 status = "disabled";
285 };
286
287 frame@f9025000 {
288 frame-number = <3>;
289 interrupts = <0 11 0x4>;
290 reg = <0xf9025000 0x1000>;
291 status = "disabled";
292 };
293
294 frame@f9026000 {
295 frame-number = <4>;
296 interrupts = <0 12 0x4>;
297 reg = <0xf9026000 0x1000>;
298 status = "disabled";
299 };
300
301 frame@f9027000 {
302 frame-number = <5>;
303 interrupts = <0 13 0x4>;
304 reg = <0xf9027000 0x1000>;
305 status = "disabled";
306 };
307
308 frame@f9028000 {
309 frame-number = <6>;
310 interrupts = <0 14 0x4>;
311 reg = <0xf9028000 0x1000>;
312 status = "disabled";
313 };
314 };
315
316 saw0: power-controller@f9089000 {
317 compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
318 reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
319 };
320
321 saw1: power-controller@f9099000 {
322 compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
323 reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
324 };
325
326 saw2: power-controller@f90a9000 {
327 compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
328 reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
329 };
330
331 saw3: power-controller@f90b9000 {
332 compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
333 reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
334 };
335
336 saw_l2: power-controller@f9012000 {
337 compatible = "qcom,saw2";
338 reg = <0xf9012000 0x1000>;
339 regulator;
340 };
341
342 acc0: clock-controller@f9088000 {
343 compatible = "qcom,kpss-acc-v2";
344 reg = <0xf9088000 0x1000>,
345 <0xf9008000 0x1000>;
346 };
347
348 acc1: clock-controller@f9098000 {
349 compatible = "qcom,kpss-acc-v2";
350 reg = <0xf9098000 0x1000>,
351 <0xf9008000 0x1000>;
352 };
353
354 acc2: clock-controller@f90a8000 {
355 compatible = "qcom,kpss-acc-v2";
356 reg = <0xf90a8000 0x1000>,
357 <0xf9008000 0x1000>;
358 };
359
360 acc3: clock-controller@f90b8000 {
361 compatible = "qcom,kpss-acc-v2";
362 reg = <0xf90b8000 0x1000>,
363 <0xf9008000 0x1000>;
364 };
365
366 restart@fc4ab000 {
367 compatible = "qcom,pshold";
368 reg = <0xfc4ab000 0x4>;
369 };
370
371 gcc: clock-controller@fc400000 {
372 compatible = "qcom,gcc-apq8084";
373 #clock-cells = <1>;
374 #reset-cells = <1>;
375 #power-domain-cells = <1>;
376 reg = <0xfc400000 0x4000>;
377 };
378
379 tcsr_mutex_regs: syscon@fd484000 {
380 compatible = "syscon";
381 reg = <0xfd484000 0x2000>;
382 };
383
384 tcsr_mutex: hwlock {
385 compatible = "qcom,tcsr-mutex";
386 syscon = <&tcsr_mutex_regs 0 0x80>;
387 #hwlock-cells = <1>;
388 };
389
390 rpm_msg_ram: memory@fc428000 {
391 compatible = "qcom,rpm-msg-ram";
392 reg = <0xfc428000 0x4000>;
393 };
394
395 tlmm: pinctrl@fd510000 {
396 compatible = "qcom,apq8084-pinctrl";
397 reg = <0xfd510000 0x4000>;
398 gpio-controller;
399 #gpio-cells = <2>;
400 interrupt-controller;
401 #interrupt-cells = <2>;
402 interrupts = <0 208 0>;
403 };
404
405 blsp2_uart2: serial@f995e000 {
406 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
407 reg = <0xf995e000 0x1000>;
408 interrupts = <0 114 0x0>;
409 clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
410 clock-names = "core", "iface";
411 status = "disabled";
412 };
413
414 sdhci@f9824900 {
415 compatible = "qcom,sdhci-msm-v4";
416 reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
417 reg-names = "hc_mem", "core_mem";
418 interrupts = <0 123 0>, <0 138 0>;
419 interrupt-names = "hc_irq", "pwr_irq";
420 clocks = <&gcc GCC_SDCC1_APPS_CLK>,
421 <&gcc GCC_SDCC1_AHB_CLK>,
422 <&xo_board>;
423 clock-names = "core", "iface", "xo";
424 status = "disabled";
425 };
426
427 sdhci@f98a4900 {
428 compatible = "qcom,sdhci-msm-v4";
429 reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
430 reg-names = "hc_mem", "core_mem";
431 interrupts = <0 125 0>, <0 221 0>;
432 interrupt-names = "hc_irq", "pwr_irq";
433 clocks = <&gcc GCC_SDCC2_APPS_CLK>,
434 <&gcc GCC_SDCC2_AHB_CLK>,
435 <&xo_board>;
436 clock-names = "core", "iface", "xo";
437 status = "disabled";
438 };
439
440 spmi_bus: spmi@fc4cf000 {
441 compatible = "qcom,spmi-pmic-arb";
442 reg-names = "core", "intr", "cnfg";
443 reg = <0xfc4cf000 0x1000>,
444 <0xfc4cb000 0x1000>,
445 <0xfc4ca000 0x1000>;
446 interrupt-names = "periph_irq";
447 interrupts = <0 190 0>;
448 qcom,ee = <0>;
449 qcom,channel = <0>;
450 #address-cells = <2>;
451 #size-cells = <0>;
452 interrupt-controller;
453 #interrupt-cells = <4>;
454 };
455 };
456
457 smd {
458 compatible = "qcom,smd";
459
460 rpm {
461 interrupts = <0 168 1>;
462 qcom,ipc = <&apcs 8 0>;
463 qcom,smd-edge = <15>;
464
465 rpm_requests {
466 compatible = "qcom,rpm-apq8084";
467 qcom,smd-channels = "rpm_requests";
468
469 pma8084-regulators {
470 compatible = "qcom,rpm-pma8084-regulators";
471
472 pma8084_s1: s1 {};
473 pma8084_s2: s2 {};
474 pma8084_s3: s3 {};
475 pma8084_s4: s4 {};
476 pma8084_s5: s5 {};
477 pma8084_s6: s6 {};
478 pma8084_s7: s7 {};
479 pma8084_s8: s8 {};
480 pma8084_s9: s9 {};
481 pma8084_s10: s10 {};
482 pma8084_s11: s11 {};
483 pma8084_s12: s12 {};
484
485 pma8084_l1: l1 {};
486 pma8084_l2: l2 {};
487 pma8084_l3: l3 {};
488 pma8084_l4: l4 {};
489 pma8084_l5: l5 {};
490 pma8084_l6: l6 {};
491 pma8084_l7: l7 {};
492 pma8084_l8: l8 {};
493 pma8084_l9: l9 {};
494 pma8084_l10: l10 {};
495 pma8084_l11: l11 {};
496 pma8084_l12: l12 {};
497 pma8084_l13: l13 {};
498 pma8084_l14: l14 {};
499 pma8084_l15: l15 {};
500 pma8084_l16: l16 {};
501 pma8084_l17: l17 {};
502 pma8084_l18: l18 {};
503 pma8084_l19: l19 {};
504 pma8084_l20: l20 {};
505 pma8084_l21: l21 {};
506 pma8084_l22: l22 {};
507 pma8084_l23: l23 {};
508 pma8084_l24: l24 {};
509 pma8084_l25: l25 {};
510 pma8084_l26: l26 {};
511 pma8084_l27: l27 {};
512
513 pma8084_lvs1: lvs1 {};
514 pma8084_lvs2: lvs2 {};
515 pma8084_lvs3: lvs3 {};
516 pma8084_lvs4: lvs4 {};
517
518 pma8084_5vs1: 5vs1 {};
519 };
520 };
521 };
522 };
523};
1// SPDX-License-Identifier: GPL-2.0
2/dts-v1/;
3
4#include <dt-bindings/clock/qcom,gcc-apq8084.h>
5#include <dt-bindings/gpio/gpio.h>
6
7/ {
8 #address-cells = <1>;
9 #size-cells = <1>;
10 model = "Qualcomm APQ 8084";
11 compatible = "qcom,apq8084";
12 interrupt-parent = <&intc>;
13
14 reserved-memory {
15 #address-cells = <1>;
16 #size-cells = <1>;
17 ranges;
18
19 smem_mem: smem_region@fa00000 {
20 reg = <0xfa00000 0x200000>;
21 no-map;
22 };
23 };
24
25 cpus {
26 #address-cells = <1>;
27 #size-cells = <0>;
28
29 cpu@0 {
30 device_type = "cpu";
31 compatible = "qcom,krait";
32 reg = <0>;
33 enable-method = "qcom,kpss-acc-v2";
34 next-level-cache = <&L2>;
35 qcom,acc = <&acc0>;
36 qcom,saw = <&saw0>;
37 cpu-idle-states = <&CPU_SPC>;
38 };
39
40 cpu@1 {
41 device_type = "cpu";
42 compatible = "qcom,krait";
43 reg = <1>;
44 enable-method = "qcom,kpss-acc-v2";
45 next-level-cache = <&L2>;
46 qcom,acc = <&acc1>;
47 qcom,saw = <&saw1>;
48 cpu-idle-states = <&CPU_SPC>;
49 };
50
51 cpu@2 {
52 device_type = "cpu";
53 compatible = "qcom,krait";
54 reg = <2>;
55 enable-method = "qcom,kpss-acc-v2";
56 next-level-cache = <&L2>;
57 qcom,acc = <&acc2>;
58 qcom,saw = <&saw2>;
59 cpu-idle-states = <&CPU_SPC>;
60 };
61
62 cpu@3 {
63 device_type = "cpu";
64 compatible = "qcom,krait";
65 reg = <3>;
66 enable-method = "qcom,kpss-acc-v2";
67 next-level-cache = <&L2>;
68 qcom,acc = <&acc3>;
69 qcom,saw = <&saw3>;
70 cpu-idle-states = <&CPU_SPC>;
71 };
72
73 L2: l2-cache {
74 compatible = "qcom,arch-cache";
75 cache-level = <2>;
76 qcom,saw = <&saw_l2>;
77 };
78
79 idle-states {
80 CPU_SPC: spc {
81 compatible = "qcom,idle-state-spc",
82 "arm,idle-state";
83 entry-latency-us = <150>;
84 exit-latency-us = <200>;
85 min-residency-us = <2000>;
86 };
87 };
88 };
89
90 memory {
91 device_type = "memory";
92 reg = <0x0 0x0>;
93 };
94
95 firmware {
96 scm {
97 compatible = "qcom,scm";
98 clocks = <&gcc GCC_CE1_CLK> , <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
99 clock-names = "core", "bus", "iface";
100 };
101 };
102
103 thermal-zones {
104 cpu-thermal0 {
105 polling-delay-passive = <250>;
106 polling-delay = <1000>;
107
108 thermal-sensors = <&tsens 5>;
109
110 trips {
111 cpu_alert0: trip0 {
112 temperature = <75000>;
113 hysteresis = <2000>;
114 type = "passive";
115 };
116 cpu_crit0: trip1 {
117 temperature = <110000>;
118 hysteresis = <2000>;
119 type = "critical";
120 };
121 };
122 };
123
124 cpu-thermal1 {
125 polling-delay-passive = <250>;
126 polling-delay = <1000>;
127
128 thermal-sensors = <&tsens 6>;
129
130 trips {
131 cpu_alert1: trip0 {
132 temperature = <75000>;
133 hysteresis = <2000>;
134 type = "passive";
135 };
136 cpu_crit1: trip1 {
137 temperature = <110000>;
138 hysteresis = <2000>;
139 type = "critical";
140 };
141 };
142 };
143
144 cpu-thermal2 {
145 polling-delay-passive = <250>;
146 polling-delay = <1000>;
147
148 thermal-sensors = <&tsens 7>;
149
150 trips {
151 cpu_alert2: trip0 {
152 temperature = <75000>;
153 hysteresis = <2000>;
154 type = "passive";
155 };
156 cpu_crit2: trip1 {
157 temperature = <110000>;
158 hysteresis = <2000>;
159 type = "critical";
160 };
161 };
162 };
163
164 cpu-thermal3 {
165 polling-delay-passive = <250>;
166 polling-delay = <1000>;
167
168 thermal-sensors = <&tsens 8>;
169
170 trips {
171 cpu_alert3: trip0 {
172 temperature = <75000>;
173 hysteresis = <2000>;
174 type = "passive";
175 };
176 cpu_crit3: trip1 {
177 temperature = <110000>;
178 hysteresis = <2000>;
179 type = "critical";
180 };
181 };
182 };
183 };
184
185 cpu-pmu {
186 compatible = "qcom,krait-pmu";
187 interrupts = <1 7 0xf04>;
188 };
189
190 clocks {
191 xo_board: xo_board {
192 compatible = "fixed-clock";
193 #clock-cells = <0>;
194 clock-frequency = <19200000>;
195 };
196
197 sleep_clk: sleep_clk {
198 compatible = "fixed-clock";
199 #clock-cells = <0>;
200 clock-frequency = <32768>;
201 };
202 };
203
204 timer {
205 compatible = "arm,armv7-timer";
206 interrupts = <1 2 0xf08>,
207 <1 3 0xf08>,
208 <1 4 0xf08>,
209 <1 1 0xf08>;
210 clock-frequency = <19200000>;
211 };
212
213 smem {
214 compatible = "qcom,smem";
215
216 qcom,rpm-msg-ram = <&rpm_msg_ram>;
217 memory-region = <&smem_mem>;
218
219 hwlocks = <&tcsr_mutex 3>;
220 };
221
222 soc: soc {
223 #address-cells = <1>;
224 #size-cells = <1>;
225 ranges;
226 compatible = "simple-bus";
227
228 intc: interrupt-controller@f9000000 {
229 compatible = "qcom,msm-qgic2";
230 interrupt-controller;
231 #interrupt-cells = <3>;
232 reg = <0xf9000000 0x1000>,
233 <0xf9002000 0x1000>;
234 };
235
236 apcs: syscon@f9011000 {
237 compatible = "syscon";
238 reg = <0xf9011000 0x1000>;
239 };
240
241 qfprom: qfprom@fc4bc000 {
242 #address-cells = <1>;
243 #size-cells = <1>;
244 compatible = "qcom,qfprom";
245 reg = <0xfc4bc000 0x1000>;
246 tsens_calib: calib@d0 {
247 reg = <0xd0 0x18>;
248 };
249 tsens_backup: backup@440 {
250 reg = <0x440 0x10>;
251 };
252 };
253
254 tsens: thermal-sensor@fc4a8000 {
255 compatible = "qcom,msm8974-tsens";
256 reg = <0xfc4a8000 0x2000>;
257 nvmem-cells = <&tsens_calib>, <&tsens_backup>;
258 nvmem-cell-names = "calib", "calib_backup";
259 #thermal-sensor-cells = <1>;
260 };
261
262 timer@f9020000 {
263 #address-cells = <1>;
264 #size-cells = <1>;
265 ranges;
266 compatible = "arm,armv7-timer-mem";
267 reg = <0xf9020000 0x1000>;
268 clock-frequency = <19200000>;
269
270 frame@f9021000 {
271 frame-number = <0>;
272 interrupts = <0 8 0x4>,
273 <0 7 0x4>;
274 reg = <0xf9021000 0x1000>,
275 <0xf9022000 0x1000>;
276 };
277
278 frame@f9023000 {
279 frame-number = <1>;
280 interrupts = <0 9 0x4>;
281 reg = <0xf9023000 0x1000>;
282 status = "disabled";
283 };
284
285 frame@f9024000 {
286 frame-number = <2>;
287 interrupts = <0 10 0x4>;
288 reg = <0xf9024000 0x1000>;
289 status = "disabled";
290 };
291
292 frame@f9025000 {
293 frame-number = <3>;
294 interrupts = <0 11 0x4>;
295 reg = <0xf9025000 0x1000>;
296 status = "disabled";
297 };
298
299 frame@f9026000 {
300 frame-number = <4>;
301 interrupts = <0 12 0x4>;
302 reg = <0xf9026000 0x1000>;
303 status = "disabled";
304 };
305
306 frame@f9027000 {
307 frame-number = <5>;
308 interrupts = <0 13 0x4>;
309 reg = <0xf9027000 0x1000>;
310 status = "disabled";
311 };
312
313 frame@f9028000 {
314 frame-number = <6>;
315 interrupts = <0 14 0x4>;
316 reg = <0xf9028000 0x1000>;
317 status = "disabled";
318 };
319 };
320
321 saw0: power-controller@f9089000 {
322 compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
323 reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
324 };
325
326 saw1: power-controller@f9099000 {
327 compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
328 reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
329 };
330
331 saw2: power-controller@f90a9000 {
332 compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
333 reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
334 };
335
336 saw3: power-controller@f90b9000 {
337 compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
338 reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
339 };
340
341 saw_l2: power-controller@f9012000 {
342 compatible = "qcom,saw2";
343 reg = <0xf9012000 0x1000>;
344 regulator;
345 };
346
347 acc0: clock-controller@f9088000 {
348 compatible = "qcom,kpss-acc-v2";
349 reg = <0xf9088000 0x1000>,
350 <0xf9008000 0x1000>;
351 };
352
353 acc1: clock-controller@f9098000 {
354 compatible = "qcom,kpss-acc-v2";
355 reg = <0xf9098000 0x1000>,
356 <0xf9008000 0x1000>;
357 };
358
359 acc2: clock-controller@f90a8000 {
360 compatible = "qcom,kpss-acc-v2";
361 reg = <0xf90a8000 0x1000>,
362 <0xf9008000 0x1000>;
363 };
364
365 acc3: clock-controller@f90b8000 {
366 compatible = "qcom,kpss-acc-v2";
367 reg = <0xf90b8000 0x1000>,
368 <0xf9008000 0x1000>;
369 };
370
371 restart@fc4ab000 {
372 compatible = "qcom,pshold";
373 reg = <0xfc4ab000 0x4>;
374 };
375
376 gcc: clock-controller@fc400000 {
377 compatible = "qcom,gcc-apq8084";
378 #clock-cells = <1>;
379 #reset-cells = <1>;
380 #power-domain-cells = <1>;
381 reg = <0xfc400000 0x4000>;
382 };
383
384 tcsr_mutex_regs: syscon@fd484000 {
385 compatible = "syscon";
386 reg = <0xfd484000 0x2000>;
387 };
388
389 tcsr_mutex: hwlock {
390 compatible = "qcom,tcsr-mutex";
391 syscon = <&tcsr_mutex_regs 0 0x80>;
392 #hwlock-cells = <1>;
393 };
394
395 rpm_msg_ram: memory@fc428000 {
396 compatible = "qcom,rpm-msg-ram";
397 reg = <0xfc428000 0x4000>;
398 };
399
400 tlmm: pinctrl@fd510000 {
401 compatible = "qcom,apq8084-pinctrl";
402 reg = <0xfd510000 0x4000>;
403 gpio-controller;
404 #gpio-cells = <2>;
405 interrupt-controller;
406 #interrupt-cells = <2>;
407 interrupts = <0 208 0>;
408 };
409
410 blsp2_uart2: serial@f995e000 {
411 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
412 reg = <0xf995e000 0x1000>;
413 interrupts = <0 114 0x0>;
414 clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
415 clock-names = "core", "iface";
416 status = "disabled";
417 };
418
419 sdhci@f9824900 {
420 compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
421 reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
422 reg-names = "hc_mem", "core_mem";
423 interrupts = <0 123 0>, <0 138 0>;
424 interrupt-names = "hc_irq", "pwr_irq";
425 clocks = <&gcc GCC_SDCC1_APPS_CLK>,
426 <&gcc GCC_SDCC1_AHB_CLK>,
427 <&xo_board>;
428 clock-names = "core", "iface", "xo";
429 status = "disabled";
430 };
431
432 sdhci@f98a4900 {
433 compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
434 reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
435 reg-names = "hc_mem", "core_mem";
436 interrupts = <0 125 0>, <0 221 0>;
437 interrupt-names = "hc_irq", "pwr_irq";
438 clocks = <&gcc GCC_SDCC2_APPS_CLK>,
439 <&gcc GCC_SDCC2_AHB_CLK>,
440 <&xo_board>;
441 clock-names = "core", "iface", "xo";
442 status = "disabled";
443 };
444
445 spmi_bus: spmi@fc4cf000 {
446 compatible = "qcom,spmi-pmic-arb";
447 reg-names = "core", "intr", "cnfg";
448 reg = <0xfc4cf000 0x1000>,
449 <0xfc4cb000 0x1000>,
450 <0xfc4ca000 0x1000>;
451 interrupt-names = "periph_irq";
452 interrupts = <0 190 0>;
453 qcom,ee = <0>;
454 qcom,channel = <0>;
455 #address-cells = <2>;
456 #size-cells = <0>;
457 interrupt-controller;
458 #interrupt-cells = <4>;
459 };
460 };
461
462 smd {
463 compatible = "qcom,smd";
464
465 rpm {
466 interrupts = <0 168 1>;
467 qcom,ipc = <&apcs 8 0>;
468 qcom,smd-edge = <15>;
469
470 rpm_requests {
471 compatible = "qcom,rpm-apq8084";
472 qcom,smd-channels = "rpm_requests";
473
474 pma8084-regulators {
475 compatible = "qcom,rpm-pma8084-regulators";
476
477 pma8084_s1: s1 {};
478 pma8084_s2: s2 {};
479 pma8084_s3: s3 {};
480 pma8084_s4: s4 {};
481 pma8084_s5: s5 {};
482 pma8084_s6: s6 {};
483 pma8084_s7: s7 {};
484 pma8084_s8: s8 {};
485 pma8084_s9: s9 {};
486 pma8084_s10: s10 {};
487 pma8084_s11: s11 {};
488 pma8084_s12: s12 {};
489
490 pma8084_l1: l1 {};
491 pma8084_l2: l2 {};
492 pma8084_l3: l3 {};
493 pma8084_l4: l4 {};
494 pma8084_l5: l5 {};
495 pma8084_l6: l6 {};
496 pma8084_l7: l7 {};
497 pma8084_l8: l8 {};
498 pma8084_l9: l9 {};
499 pma8084_l10: l10 {};
500 pma8084_l11: l11 {};
501 pma8084_l12: l12 {};
502 pma8084_l13: l13 {};
503 pma8084_l14: l14 {};
504 pma8084_l15: l15 {};
505 pma8084_l16: l16 {};
506 pma8084_l17: l17 {};
507 pma8084_l18: l18 {};
508 pma8084_l19: l19 {};
509 pma8084_l20: l20 {};
510 pma8084_l21: l21 {};
511 pma8084_l22: l22 {};
512 pma8084_l23: l23 {};
513 pma8084_l24: l24 {};
514 pma8084_l25: l25 {};
515 pma8084_l26: l26 {};
516 pma8084_l27: l27 {};
517
518 pma8084_lvs1: lvs1 {};
519 pma8084_lvs2: lvs2 {};
520 pma8084_lvs3: lvs3 {};
521 pma8084_lvs4: lvs4 {};
522
523 pma8084_5vs1: 5vs1 {};
524 };
525 };
526 };
527 };
528};