Loading...
1/*
2 * Common boot and setup code for both 32-bit and 64-bit.
3 * Extracted from arch/powerpc/kernel/setup_64.c.
4 *
5 * Copyright (C) 2001 PPC64 Team, IBM Corp
6 *
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License
9 * as published by the Free Software Foundation; either version
10 * 2 of the License, or (at your option) any later version.
11 */
12
13#undef DEBUG
14
15#include <linux/export.h>
16#include <linux/string.h>
17#include <linux/sched.h>
18#include <linux/init.h>
19#include <linux/kernel.h>
20#include <linux/reboot.h>
21#include <linux/delay.h>
22#include <linux/initrd.h>
23#include <linux/platform_device.h>
24#include <linux/seq_file.h>
25#include <linux/ioport.h>
26#include <linux/console.h>
27#include <linux/screen_info.h>
28#include <linux/root_dev.h>
29#include <linux/notifier.h>
30#include <linux/cpu.h>
31#include <linux/unistd.h>
32#include <linux/serial.h>
33#include <linux/serial_8250.h>
34#include <linux/percpu.h>
35#include <linux/memblock.h>
36#include <linux/of_platform.h>
37#include <linux/hugetlb.h>
38#include <asm/debugfs.h>
39#include <asm/io.h>
40#include <asm/paca.h>
41#include <asm/prom.h>
42#include <asm/processor.h>
43#include <asm/vdso_datapage.h>
44#include <asm/pgtable.h>
45#include <asm/smp.h>
46#include <asm/elf.h>
47#include <asm/machdep.h>
48#include <asm/time.h>
49#include <asm/cputable.h>
50#include <asm/sections.h>
51#include <asm/firmware.h>
52#include <asm/btext.h>
53#include <asm/nvram.h>
54#include <asm/setup.h>
55#include <asm/rtas.h>
56#include <asm/iommu.h>
57#include <asm/serial.h>
58#include <asm/cache.h>
59#include <asm/page.h>
60#include <asm/mmu.h>
61#include <asm/xmon.h>
62#include <asm/cputhreads.h>
63#include <mm/mmu_decl.h>
64#include <asm/fadump.h>
65#include <asm/udbg.h>
66#include <asm/hugetlb.h>
67#include <asm/livepatch.h>
68#include <asm/mmu_context.h>
69#include <asm/cpu_has_feature.h>
70
71#include "setup.h"
72
73#ifdef DEBUG
74#include <asm/udbg.h>
75#define DBG(fmt...) udbg_printf(fmt)
76#else
77#define DBG(fmt...)
78#endif
79
80/* The main machine-dep calls structure
81 */
82struct machdep_calls ppc_md;
83EXPORT_SYMBOL(ppc_md);
84struct machdep_calls *machine_id;
85EXPORT_SYMBOL(machine_id);
86
87int boot_cpuid = -1;
88EXPORT_SYMBOL_GPL(boot_cpuid);
89
90/*
91 * These are used in binfmt_elf.c to put aux entries on the stack
92 * for each elf executable being started.
93 */
94int dcache_bsize;
95int icache_bsize;
96int ucache_bsize;
97
98
99unsigned long klimit = (unsigned long) _end;
100
101/*
102 * This still seems to be needed... -- paulus
103 */
104struct screen_info screen_info = {
105 .orig_x = 0,
106 .orig_y = 25,
107 .orig_video_cols = 80,
108 .orig_video_lines = 25,
109 .orig_video_isVGA = 1,
110 .orig_video_points = 16
111};
112#if defined(CONFIG_FB_VGA16_MODULE)
113EXPORT_SYMBOL(screen_info);
114#endif
115
116/* Variables required to store legacy IO irq routing */
117int of_i8042_kbd_irq;
118EXPORT_SYMBOL_GPL(of_i8042_kbd_irq);
119int of_i8042_aux_irq;
120EXPORT_SYMBOL_GPL(of_i8042_aux_irq);
121
122#ifdef __DO_IRQ_CANON
123/* XXX should go elsewhere eventually */
124int ppc_do_canonicalize_irqs;
125EXPORT_SYMBOL(ppc_do_canonicalize_irqs);
126#endif
127
128#ifdef CONFIG_CRASH_CORE
129/* This keeps a track of which one is the crashing cpu. */
130int crashing_cpu = -1;
131#endif
132
133/* also used by kexec */
134void machine_shutdown(void)
135{
136#ifdef CONFIG_FA_DUMP
137 /*
138 * if fadump is active, cleanup the fadump registration before we
139 * shutdown.
140 */
141 fadump_cleanup();
142#endif
143
144 if (ppc_md.machine_shutdown)
145 ppc_md.machine_shutdown();
146}
147
148static void machine_hang(void)
149{
150 pr_emerg("System Halted, OK to turn off power\n");
151 local_irq_disable();
152 while (1)
153 ;
154}
155
156void machine_restart(char *cmd)
157{
158 machine_shutdown();
159 if (ppc_md.restart)
160 ppc_md.restart(cmd);
161
162 smp_send_stop();
163
164 do_kernel_restart(cmd);
165 mdelay(1000);
166
167 machine_hang();
168}
169
170void machine_power_off(void)
171{
172 machine_shutdown();
173 if (pm_power_off)
174 pm_power_off();
175
176 smp_send_stop();
177 machine_hang();
178}
179/* Used by the G5 thermal driver */
180EXPORT_SYMBOL_GPL(machine_power_off);
181
182void (*pm_power_off)(void);
183EXPORT_SYMBOL_GPL(pm_power_off);
184
185void machine_halt(void)
186{
187 machine_shutdown();
188 if (ppc_md.halt)
189 ppc_md.halt();
190
191 smp_send_stop();
192 machine_hang();
193}
194
195
196#ifdef CONFIG_TAU
197extern u32 cpu_temp(unsigned long cpu);
198extern u32 cpu_temp_both(unsigned long cpu);
199#endif /* CONFIG_TAU */
200
201#ifdef CONFIG_SMP
202DEFINE_PER_CPU(unsigned int, cpu_pvr);
203#endif
204
205static void show_cpuinfo_summary(struct seq_file *m)
206{
207 struct device_node *root;
208 const char *model = NULL;
209#if defined(CONFIG_SMP) && defined(CONFIG_PPC32)
210 unsigned long bogosum = 0;
211 int i;
212 for_each_online_cpu(i)
213 bogosum += loops_per_jiffy;
214 seq_printf(m, "total bogomips\t: %lu.%02lu\n",
215 bogosum/(500000/HZ), bogosum/(5000/HZ) % 100);
216#endif /* CONFIG_SMP && CONFIG_PPC32 */
217 seq_printf(m, "timebase\t: %lu\n", ppc_tb_freq);
218 if (ppc_md.name)
219 seq_printf(m, "platform\t: %s\n", ppc_md.name);
220 root = of_find_node_by_path("/");
221 if (root)
222 model = of_get_property(root, "model", NULL);
223 if (model)
224 seq_printf(m, "model\t\t: %s\n", model);
225 of_node_put(root);
226
227 if (ppc_md.show_cpuinfo != NULL)
228 ppc_md.show_cpuinfo(m);
229
230#ifdef CONFIG_PPC32
231 /* Display the amount of memory */
232 seq_printf(m, "Memory\t\t: %d MB\n",
233 (unsigned int)(total_memory / (1024 * 1024)));
234#endif
235}
236
237static int show_cpuinfo(struct seq_file *m, void *v)
238{
239 unsigned long cpu_id = (unsigned long)v - 1;
240 unsigned int pvr;
241 unsigned long proc_freq;
242 unsigned short maj;
243 unsigned short min;
244
245#ifdef CONFIG_SMP
246 pvr = per_cpu(cpu_pvr, cpu_id);
247#else
248 pvr = mfspr(SPRN_PVR);
249#endif
250 maj = (pvr >> 8) & 0xFF;
251 min = pvr & 0xFF;
252
253 seq_printf(m, "processor\t: %lu\n", cpu_id);
254 seq_printf(m, "cpu\t\t: ");
255
256 if (cur_cpu_spec->pvr_mask && cur_cpu_spec->cpu_name)
257 seq_printf(m, "%s", cur_cpu_spec->cpu_name);
258 else
259 seq_printf(m, "unknown (%08x)", pvr);
260
261#ifdef CONFIG_ALTIVEC
262 if (cpu_has_feature(CPU_FTR_ALTIVEC))
263 seq_printf(m, ", altivec supported");
264#endif /* CONFIG_ALTIVEC */
265
266 seq_printf(m, "\n");
267
268#ifdef CONFIG_TAU
269 if (cur_cpu_spec->cpu_features & CPU_FTR_TAU) {
270#ifdef CONFIG_TAU_AVERAGE
271 /* more straightforward, but potentially misleading */
272 seq_printf(m, "temperature \t: %u C (uncalibrated)\n",
273 cpu_temp(cpu_id));
274#else
275 /* show the actual temp sensor range */
276 u32 temp;
277 temp = cpu_temp_both(cpu_id);
278 seq_printf(m, "temperature \t: %u-%u C (uncalibrated)\n",
279 temp & 0xff, temp >> 16);
280#endif
281 }
282#endif /* CONFIG_TAU */
283
284 /*
285 * Platforms that have variable clock rates, should implement
286 * the method ppc_md.get_proc_freq() that reports the clock
287 * rate of a given cpu. The rest can use ppc_proc_freq to
288 * report the clock rate that is same across all cpus.
289 */
290 if (ppc_md.get_proc_freq)
291 proc_freq = ppc_md.get_proc_freq(cpu_id);
292 else
293 proc_freq = ppc_proc_freq;
294
295 if (proc_freq)
296 seq_printf(m, "clock\t\t: %lu.%06luMHz\n",
297 proc_freq / 1000000, proc_freq % 1000000);
298
299 if (ppc_md.show_percpuinfo != NULL)
300 ppc_md.show_percpuinfo(m, cpu_id);
301
302 /* If we are a Freescale core do a simple check so
303 * we dont have to keep adding cases in the future */
304 if (PVR_VER(pvr) & 0x8000) {
305 switch (PVR_VER(pvr)) {
306 case 0x8000: /* 7441/7450/7451, Voyager */
307 case 0x8001: /* 7445/7455, Apollo 6 */
308 case 0x8002: /* 7447/7457, Apollo 7 */
309 case 0x8003: /* 7447A, Apollo 7 PM */
310 case 0x8004: /* 7448, Apollo 8 */
311 case 0x800c: /* 7410, Nitro */
312 maj = ((pvr >> 8) & 0xF);
313 min = PVR_MIN(pvr);
314 break;
315 default: /* e500/book-e */
316 maj = PVR_MAJ(pvr);
317 min = PVR_MIN(pvr);
318 break;
319 }
320 } else {
321 switch (PVR_VER(pvr)) {
322 case 0x0020: /* 403 family */
323 maj = PVR_MAJ(pvr) + 1;
324 min = PVR_MIN(pvr);
325 break;
326 case 0x1008: /* 740P/750P ?? */
327 maj = ((pvr >> 8) & 0xFF) - 1;
328 min = pvr & 0xFF;
329 break;
330 case 0x004e: /* POWER9 bits 12-15 give chip type */
331 maj = (pvr >> 8) & 0x0F;
332 min = pvr & 0xFF;
333 break;
334 default:
335 maj = (pvr >> 8) & 0xFF;
336 min = pvr & 0xFF;
337 break;
338 }
339 }
340
341 seq_printf(m, "revision\t: %hd.%hd (pvr %04x %04x)\n",
342 maj, min, PVR_VER(pvr), PVR_REV(pvr));
343
344#ifdef CONFIG_PPC32
345 seq_printf(m, "bogomips\t: %lu.%02lu\n",
346 loops_per_jiffy / (500000/HZ),
347 (loops_per_jiffy / (5000/HZ)) % 100);
348#endif
349 seq_printf(m, "\n");
350
351 /* If this is the last cpu, print the summary */
352 if (cpumask_next(cpu_id, cpu_online_mask) >= nr_cpu_ids)
353 show_cpuinfo_summary(m);
354
355 return 0;
356}
357
358static void *c_start(struct seq_file *m, loff_t *pos)
359{
360 if (*pos == 0) /* just in case, cpu 0 is not the first */
361 *pos = cpumask_first(cpu_online_mask);
362 else
363 *pos = cpumask_next(*pos - 1, cpu_online_mask);
364 if ((*pos) < nr_cpu_ids)
365 return (void *)(unsigned long)(*pos + 1);
366 return NULL;
367}
368
369static void *c_next(struct seq_file *m, void *v, loff_t *pos)
370{
371 (*pos)++;
372 return c_start(m, pos);
373}
374
375static void c_stop(struct seq_file *m, void *v)
376{
377}
378
379const struct seq_operations cpuinfo_op = {
380 .start = c_start,
381 .next = c_next,
382 .stop = c_stop,
383 .show = show_cpuinfo,
384};
385
386void __init check_for_initrd(void)
387{
388#ifdef CONFIG_BLK_DEV_INITRD
389 DBG(" -> check_for_initrd() initrd_start=0x%lx initrd_end=0x%lx\n",
390 initrd_start, initrd_end);
391
392 /* If we were passed an initrd, set the ROOT_DEV properly if the values
393 * look sensible. If not, clear initrd reference.
394 */
395 if (is_kernel_addr(initrd_start) && is_kernel_addr(initrd_end) &&
396 initrd_end > initrd_start)
397 ROOT_DEV = Root_RAM0;
398 else
399 initrd_start = initrd_end = 0;
400
401 if (initrd_start)
402 pr_info("Found initrd at 0x%lx:0x%lx\n", initrd_start, initrd_end);
403
404 DBG(" <- check_for_initrd()\n");
405#endif /* CONFIG_BLK_DEV_INITRD */
406}
407
408#ifdef CONFIG_SMP
409
410int threads_per_core, threads_per_subcore, threads_shift;
411cpumask_t threads_core_mask;
412EXPORT_SYMBOL_GPL(threads_per_core);
413EXPORT_SYMBOL_GPL(threads_per_subcore);
414EXPORT_SYMBOL_GPL(threads_shift);
415EXPORT_SYMBOL_GPL(threads_core_mask);
416
417static void __init cpu_init_thread_core_maps(int tpc)
418{
419 int i;
420
421 threads_per_core = tpc;
422 threads_per_subcore = tpc;
423 cpumask_clear(&threads_core_mask);
424
425 /* This implementation only supports power of 2 number of threads
426 * for simplicity and performance
427 */
428 threads_shift = ilog2(tpc);
429 BUG_ON(tpc != (1 << threads_shift));
430
431 for (i = 0; i < tpc; i++)
432 cpumask_set_cpu(i, &threads_core_mask);
433
434 printk(KERN_INFO "CPU maps initialized for %d thread%s per core\n",
435 tpc, tpc > 1 ? "s" : "");
436 printk(KERN_DEBUG " (thread shift is %d)\n", threads_shift);
437}
438
439
440u32 *cpu_to_phys_id = NULL;
441
442/**
443 * setup_cpu_maps - initialize the following cpu maps:
444 * cpu_possible_mask
445 * cpu_present_mask
446 *
447 * Having the possible map set up early allows us to restrict allocations
448 * of things like irqstacks to nr_cpu_ids rather than NR_CPUS.
449 *
450 * We do not initialize the online map here; cpus set their own bits in
451 * cpu_online_mask as they come up.
452 *
453 * This function is valid only for Open Firmware systems. finish_device_tree
454 * must be called before using this.
455 *
456 * While we're here, we may as well set the "physical" cpu ids in the paca.
457 *
458 * NOTE: This must match the parsing done in early_init_dt_scan_cpus.
459 */
460void __init smp_setup_cpu_maps(void)
461{
462 struct device_node *dn;
463 int cpu = 0;
464 int nthreads = 1;
465
466 DBG("smp_setup_cpu_maps()\n");
467
468 cpu_to_phys_id = __va(memblock_alloc(nr_cpu_ids * sizeof(u32),
469 __alignof__(u32)));
470 memset(cpu_to_phys_id, 0, nr_cpu_ids * sizeof(u32));
471
472 for_each_node_by_type(dn, "cpu") {
473 const __be32 *intserv;
474 __be32 cpu_be;
475 int j, len;
476
477 DBG(" * %pOF...\n", dn);
478
479 intserv = of_get_property(dn, "ibm,ppc-interrupt-server#s",
480 &len);
481 if (intserv) {
482 DBG(" ibm,ppc-interrupt-server#s -> %d threads\n",
483 nthreads);
484 } else {
485 DBG(" no ibm,ppc-interrupt-server#s -> 1 thread\n");
486 intserv = of_get_property(dn, "reg", &len);
487 if (!intserv) {
488 cpu_be = cpu_to_be32(cpu);
489 /* XXX: what is this? uninitialized?? */
490 intserv = &cpu_be; /* assume logical == phys */
491 len = 4;
492 }
493 }
494
495 nthreads = len / sizeof(int);
496
497 for (j = 0; j < nthreads && cpu < nr_cpu_ids; j++) {
498 bool avail;
499
500 DBG(" thread %d -> cpu %d (hard id %d)\n",
501 j, cpu, be32_to_cpu(intserv[j]));
502
503 avail = of_device_is_available(dn);
504 if (!avail)
505 avail = !of_property_match_string(dn,
506 "enable-method", "spin-table");
507
508 set_cpu_present(cpu, avail);
509 set_cpu_possible(cpu, true);
510 cpu_to_phys_id[cpu] = be32_to_cpu(intserv[j]);
511 cpu++;
512 }
513
514 if (cpu >= nr_cpu_ids) {
515 of_node_put(dn);
516 break;
517 }
518 }
519
520 /* If no SMT supported, nthreads is forced to 1 */
521 if (!cpu_has_feature(CPU_FTR_SMT)) {
522 DBG(" SMT disabled ! nthreads forced to 1\n");
523 nthreads = 1;
524 }
525
526#ifdef CONFIG_PPC64
527 /*
528 * On pSeries LPAR, we need to know how many cpus
529 * could possibly be added to this partition.
530 */
531 if (firmware_has_feature(FW_FEATURE_LPAR) &&
532 (dn = of_find_node_by_path("/rtas"))) {
533 int num_addr_cell, num_size_cell, maxcpus;
534 const __be32 *ireg;
535
536 num_addr_cell = of_n_addr_cells(dn);
537 num_size_cell = of_n_size_cells(dn);
538
539 ireg = of_get_property(dn, "ibm,lrdr-capacity", NULL);
540
541 if (!ireg)
542 goto out;
543
544 maxcpus = be32_to_cpup(ireg + num_addr_cell + num_size_cell);
545
546 /* Double maxcpus for processors which have SMT capability */
547 if (cpu_has_feature(CPU_FTR_SMT))
548 maxcpus *= nthreads;
549
550 if (maxcpus > nr_cpu_ids) {
551 printk(KERN_WARNING
552 "Partition configured for %d cpus, "
553 "operating system maximum is %u.\n",
554 maxcpus, nr_cpu_ids);
555 maxcpus = nr_cpu_ids;
556 } else
557 printk(KERN_INFO "Partition configured for %d cpus.\n",
558 maxcpus);
559
560 for (cpu = 0; cpu < maxcpus; cpu++)
561 set_cpu_possible(cpu, true);
562 out:
563 of_node_put(dn);
564 }
565 vdso_data->processorCount = num_present_cpus();
566#endif /* CONFIG_PPC64 */
567
568 /* Initialize CPU <=> thread mapping/
569 *
570 * WARNING: We assume that the number of threads is the same for
571 * every CPU in the system. If that is not the case, then some code
572 * here will have to be reworked
573 */
574 cpu_init_thread_core_maps(nthreads);
575
576 /* Now that possible cpus are set, set nr_cpu_ids for later use */
577 setup_nr_cpu_ids();
578
579 free_unused_pacas();
580}
581#endif /* CONFIG_SMP */
582
583#ifdef CONFIG_PCSPKR_PLATFORM
584static __init int add_pcspkr(void)
585{
586 struct device_node *np;
587 struct platform_device *pd;
588 int ret;
589
590 np = of_find_compatible_node(NULL, NULL, "pnpPNP,100");
591 of_node_put(np);
592 if (!np)
593 return -ENODEV;
594
595 pd = platform_device_alloc("pcspkr", -1);
596 if (!pd)
597 return -ENOMEM;
598
599 ret = platform_device_add(pd);
600 if (ret)
601 platform_device_put(pd);
602
603 return ret;
604}
605device_initcall(add_pcspkr);
606#endif /* CONFIG_PCSPKR_PLATFORM */
607
608void probe_machine(void)
609{
610 extern struct machdep_calls __machine_desc_start;
611 extern struct machdep_calls __machine_desc_end;
612 unsigned int i;
613
614 /*
615 * Iterate all ppc_md structures until we find the proper
616 * one for the current machine type
617 */
618 DBG("Probing machine type ...\n");
619
620 /*
621 * Check ppc_md is empty, if not we have a bug, ie, we setup an
622 * entry before probe_machine() which will be overwritten
623 */
624 for (i = 0; i < (sizeof(ppc_md) / sizeof(void *)); i++) {
625 if (((void **)&ppc_md)[i]) {
626 printk(KERN_ERR "Entry %d in ppc_md non empty before"
627 " machine probe !\n", i);
628 }
629 }
630
631 for (machine_id = &__machine_desc_start;
632 machine_id < &__machine_desc_end;
633 machine_id++) {
634 DBG(" %s ...", machine_id->name);
635 memcpy(&ppc_md, machine_id, sizeof(struct machdep_calls));
636 if (ppc_md.probe()) {
637 DBG(" match !\n");
638 break;
639 }
640 DBG("\n");
641 }
642 /* What can we do if we didn't find ? */
643 if (machine_id >= &__machine_desc_end) {
644 DBG("No suitable machine found !\n");
645 for (;;);
646 }
647
648 printk(KERN_INFO "Using %s machine description\n", ppc_md.name);
649}
650
651/* Match a class of boards, not a specific device configuration. */
652int check_legacy_ioport(unsigned long base_port)
653{
654 struct device_node *parent, *np = NULL;
655 int ret = -ENODEV;
656
657 switch(base_port) {
658 case I8042_DATA_REG:
659 if (!(np = of_find_compatible_node(NULL, NULL, "pnpPNP,303")))
660 np = of_find_compatible_node(NULL, NULL, "pnpPNP,f03");
661 if (np) {
662 parent = of_get_parent(np);
663
664 of_i8042_kbd_irq = irq_of_parse_and_map(parent, 0);
665 if (!of_i8042_kbd_irq)
666 of_i8042_kbd_irq = 1;
667
668 of_i8042_aux_irq = irq_of_parse_and_map(parent, 1);
669 if (!of_i8042_aux_irq)
670 of_i8042_aux_irq = 12;
671
672 of_node_put(np);
673 np = parent;
674 break;
675 }
676 np = of_find_node_by_type(NULL, "8042");
677 /* Pegasos has no device_type on its 8042 node, look for the
678 * name instead */
679 if (!np)
680 np = of_find_node_by_name(NULL, "8042");
681 if (np) {
682 of_i8042_kbd_irq = 1;
683 of_i8042_aux_irq = 12;
684 }
685 break;
686 case FDC_BASE: /* FDC1 */
687 np = of_find_node_by_type(NULL, "fdc");
688 break;
689 default:
690 /* ipmi is supposed to fail here */
691 break;
692 }
693 if (!np)
694 return ret;
695 parent = of_get_parent(np);
696 if (parent) {
697 if (strcmp(parent->type, "isa") == 0)
698 ret = 0;
699 of_node_put(parent);
700 }
701 of_node_put(np);
702 return ret;
703}
704EXPORT_SYMBOL(check_legacy_ioport);
705
706static int ppc_panic_event(struct notifier_block *this,
707 unsigned long event, void *ptr)
708{
709 /*
710 * If firmware-assisted dump has been registered then trigger
711 * firmware-assisted dump and let firmware handle everything else.
712 */
713 crash_fadump(NULL, ptr);
714 ppc_md.panic(ptr); /* May not return */
715 return NOTIFY_DONE;
716}
717
718static struct notifier_block ppc_panic_block = {
719 .notifier_call = ppc_panic_event,
720 .priority = INT_MIN /* may not return; must be done last */
721};
722
723void __init setup_panic(void)
724{
725 if (!ppc_md.panic)
726 return;
727 atomic_notifier_chain_register(&panic_notifier_list, &ppc_panic_block);
728}
729
730#ifdef CONFIG_CHECK_CACHE_COHERENCY
731/*
732 * For platforms that have configurable cache-coherency. This function
733 * checks that the cache coherency setting of the kernel matches the setting
734 * left by the firmware, as indicated in the device tree. Since a mismatch
735 * will eventually result in DMA failures, we print * and error and call
736 * BUG() in that case.
737 */
738
739#ifdef CONFIG_NOT_COHERENT_CACHE
740#define KERNEL_COHERENCY 0
741#else
742#define KERNEL_COHERENCY 1
743#endif
744
745static int __init check_cache_coherency(void)
746{
747 struct device_node *np;
748 const void *prop;
749 int devtree_coherency;
750
751 np = of_find_node_by_path("/");
752 prop = of_get_property(np, "coherency-off", NULL);
753 of_node_put(np);
754
755 devtree_coherency = prop ? 0 : 1;
756
757 if (devtree_coherency != KERNEL_COHERENCY) {
758 printk(KERN_ERR
759 "kernel coherency:%s != device tree_coherency:%s\n",
760 KERNEL_COHERENCY ? "on" : "off",
761 devtree_coherency ? "on" : "off");
762 BUG();
763 }
764
765 return 0;
766}
767
768late_initcall(check_cache_coherency);
769#endif /* CONFIG_CHECK_CACHE_COHERENCY */
770
771#ifdef CONFIG_DEBUG_FS
772struct dentry *powerpc_debugfs_root;
773EXPORT_SYMBOL(powerpc_debugfs_root);
774
775static int powerpc_debugfs_init(void)
776{
777 powerpc_debugfs_root = debugfs_create_dir("powerpc", NULL);
778
779 return powerpc_debugfs_root == NULL;
780}
781arch_initcall(powerpc_debugfs_init);
782#endif
783
784void ppc_printk_progress(char *s, unsigned short hex)
785{
786 pr_info("%s\n", s);
787}
788
789void arch_setup_pdev_archdata(struct platform_device *pdev)
790{
791 pdev->archdata.dma_mask = DMA_BIT_MASK(32);
792 pdev->dev.dma_mask = &pdev->archdata.dma_mask;
793 set_dma_ops(&pdev->dev, &dma_nommu_ops);
794}
795
796static __init void print_system_info(void)
797{
798 pr_info("-----------------------------------------------------\n");
799#ifdef CONFIG_PPC_BOOK3S_64
800 pr_info("ppc64_pft_size = 0x%llx\n", ppc64_pft_size);
801#endif
802#ifdef CONFIG_PPC_STD_MMU_32
803 pr_info("Hash_size = 0x%lx\n", Hash_size);
804#endif
805 pr_info("phys_mem_size = 0x%llx\n",
806 (unsigned long long)memblock_phys_mem_size());
807
808 pr_info("dcache_bsize = 0x%x\n", dcache_bsize);
809 pr_info("icache_bsize = 0x%x\n", icache_bsize);
810 if (ucache_bsize != 0)
811 pr_info("ucache_bsize = 0x%x\n", ucache_bsize);
812
813 pr_info("cpu_features = 0x%016lx\n", cur_cpu_spec->cpu_features);
814 pr_info(" possible = 0x%016lx\n",
815 (unsigned long)CPU_FTRS_POSSIBLE);
816 pr_info(" always = 0x%016lx\n",
817 (unsigned long)CPU_FTRS_ALWAYS);
818 pr_info("cpu_user_features = 0x%08x 0x%08x\n",
819 cur_cpu_spec->cpu_user_features,
820 cur_cpu_spec->cpu_user_features2);
821 pr_info("mmu_features = 0x%08x\n", cur_cpu_spec->mmu_features);
822#ifdef CONFIG_PPC64
823 pr_info("firmware_features = 0x%016lx\n", powerpc_firmware_features);
824#endif
825
826#ifdef CONFIG_PPC_BOOK3S_64
827 if (htab_address)
828 pr_info("htab_address = 0x%p\n", htab_address);
829 if (htab_hash_mask)
830 pr_info("htab_hash_mask = 0x%lx\n", htab_hash_mask);
831#endif
832#ifdef CONFIG_PPC_STD_MMU_32
833 if (Hash)
834 pr_info("Hash = 0x%p\n", Hash);
835 if (Hash_mask)
836 pr_info("Hash_mask = 0x%lx\n", Hash_mask);
837#endif
838
839 if (PHYSICAL_START > 0)
840 pr_info("physical_start = 0x%llx\n",
841 (unsigned long long)PHYSICAL_START);
842 pr_info("-----------------------------------------------------\n");
843}
844
845#ifdef CONFIG_SMP
846static void smp_setup_pacas(void)
847{
848 int cpu;
849
850 for_each_possible_cpu(cpu) {
851 if (cpu == smp_processor_id())
852 continue;
853 allocate_paca(cpu);
854 set_hard_smp_processor_id(cpu, cpu_to_phys_id[cpu]);
855 }
856
857 memblock_free(__pa(cpu_to_phys_id), nr_cpu_ids * sizeof(u32));
858 cpu_to_phys_id = NULL;
859}
860#endif
861
862/*
863 * Called into from start_kernel this initializes memblock, which is used
864 * to manage page allocation until mem_init is called.
865 */
866void __init setup_arch(char **cmdline_p)
867{
868 *cmdline_p = boot_command_line;
869
870 /* Set a half-reasonable default so udelay does something sensible */
871 loops_per_jiffy = 500000000 / HZ;
872
873 /* Unflatten the device-tree passed by prom_init or kexec */
874 unflatten_device_tree();
875
876 /*
877 * Initialize cache line/block info from device-tree (on ppc64) or
878 * just cputable (on ppc32).
879 */
880 initialize_cache_info();
881
882 /* Initialize RTAS if available. */
883 rtas_initialize();
884
885 /* Check if we have an initrd provided via the device-tree. */
886 check_for_initrd();
887
888 /* Probe the machine type, establish ppc_md. */
889 probe_machine();
890
891 /* Setup panic notifier if requested by the platform. */
892 setup_panic();
893
894 /*
895 * Configure ppc_md.power_save (ppc32 only, 64-bit machines do
896 * it from their respective probe() function.
897 */
898 setup_power_save();
899
900 /* Discover standard serial ports. */
901 find_legacy_serial_ports();
902
903 /* Register early console with the printk subsystem. */
904 register_early_udbg_console();
905
906 /* Setup the various CPU maps based on the device-tree. */
907 smp_setup_cpu_maps();
908
909 /* Initialize xmon. */
910 xmon_setup();
911
912 /* Check the SMT related command line arguments (ppc64). */
913 check_smt_enabled();
914
915 /* Parse memory topology */
916 mem_topology_setup();
917
918 /*
919 * Release secondary cpus out of their spinloops at 0x60 now that
920 * we can map physical -> logical CPU ids.
921 *
922 * Freescale Book3e parts spin in a loop provided by firmware,
923 * so smp_release_cpus() does nothing for them.
924 */
925#ifdef CONFIG_SMP
926 smp_setup_pacas();
927
928 /* On BookE, setup per-core TLB data structures. */
929 setup_tlb_core_data();
930
931 smp_release_cpus();
932#endif
933
934 /* Print various info about the machine that has been gathered so far. */
935 print_system_info();
936
937 /* Reserve large chunks of memory for use by CMA for KVM. */
938 kvm_cma_reserve();
939
940 klp_init_thread_info(&init_thread_info);
941
942 init_mm.start_code = (unsigned long)_stext;
943 init_mm.end_code = (unsigned long) _etext;
944 init_mm.end_data = (unsigned long) _edata;
945 init_mm.brk = klimit;
946
947#ifdef CONFIG_PPC_MM_SLICES
948#ifdef CONFIG_PPC64
949 if (!radix_enabled())
950 init_mm.context.slb_addr_limit = DEFAULT_MAP_WINDOW_USER64;
951#elif defined(CONFIG_PPC_8xx)
952 init_mm.context.slb_addr_limit = DEFAULT_MAP_WINDOW;
953#else
954#error "context.addr_limit not initialized."
955#endif
956#endif
957
958#ifdef CONFIG_SPAPR_TCE_IOMMU
959 mm_iommu_init(&init_mm);
960#endif
961 irqstack_early_init();
962 exc_lvl_early_init();
963 emergency_stack_init();
964
965 initmem_init();
966
967#ifdef CONFIG_DUMMY_CONSOLE
968 conswitchp = &dummy_con;
969#endif
970 if (ppc_md.setup_arch)
971 ppc_md.setup_arch();
972
973 paging_init();
974
975 /* Initialize the MMU context management stuff. */
976 mmu_context_init();
977
978#ifdef CONFIG_PPC64
979 /* Interrupt code needs to be 64K-aligned. */
980 if ((unsigned long)_stext & 0xffff)
981 panic("Kernelbase not 64K-aligned (0x%lx)!\n",
982 (unsigned long)_stext);
983#endif
984}
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Common boot and setup code for both 32-bit and 64-bit.
4 * Extracted from arch/powerpc/kernel/setup_64.c.
5 *
6 * Copyright (C) 2001 PPC64 Team, IBM Corp
7 */
8
9#undef DEBUG
10
11#include <linux/export.h>
12#include <linux/string.h>
13#include <linux/sched.h>
14#include <linux/init.h>
15#include <linux/kernel.h>
16#include <linux/reboot.h>
17#include <linux/delay.h>
18#include <linux/initrd.h>
19#include <linux/platform_device.h>
20#include <linux/seq_file.h>
21#include <linux/ioport.h>
22#include <linux/console.h>
23#include <linux/screen_info.h>
24#include <linux/root_dev.h>
25#include <linux/notifier.h>
26#include <linux/cpu.h>
27#include <linux/unistd.h>
28#include <linux/serial.h>
29#include <linux/serial_8250.h>
30#include <linux/percpu.h>
31#include <linux/memblock.h>
32#include <linux/of_platform.h>
33#include <linux/hugetlb.h>
34#include <asm/debugfs.h>
35#include <asm/io.h>
36#include <asm/paca.h>
37#include <asm/prom.h>
38#include <asm/processor.h>
39#include <asm/vdso_datapage.h>
40#include <asm/pgtable.h>
41#include <asm/smp.h>
42#include <asm/elf.h>
43#include <asm/machdep.h>
44#include <asm/time.h>
45#include <asm/cputable.h>
46#include <asm/sections.h>
47#include <asm/firmware.h>
48#include <asm/btext.h>
49#include <asm/nvram.h>
50#include <asm/setup.h>
51#include <asm/rtas.h>
52#include <asm/iommu.h>
53#include <asm/serial.h>
54#include <asm/cache.h>
55#include <asm/page.h>
56#include <asm/mmu.h>
57#include <asm/xmon.h>
58#include <asm/cputhreads.h>
59#include <mm/mmu_decl.h>
60#include <asm/fadump.h>
61#include <asm/udbg.h>
62#include <asm/hugetlb.h>
63#include <asm/livepatch.h>
64#include <asm/mmu_context.h>
65#include <asm/cpu_has_feature.h>
66#include <asm/kasan.h>
67
68#include "setup.h"
69
70#ifdef DEBUG
71#include <asm/udbg.h>
72#define DBG(fmt...) udbg_printf(fmt)
73#else
74#define DBG(fmt...)
75#endif
76
77/* The main machine-dep calls structure
78 */
79struct machdep_calls ppc_md;
80EXPORT_SYMBOL(ppc_md);
81struct machdep_calls *machine_id;
82EXPORT_SYMBOL(machine_id);
83
84int boot_cpuid = -1;
85EXPORT_SYMBOL_GPL(boot_cpuid);
86
87/*
88 * These are used in binfmt_elf.c to put aux entries on the stack
89 * for each elf executable being started.
90 */
91int dcache_bsize;
92int icache_bsize;
93int ucache_bsize;
94
95
96unsigned long klimit = (unsigned long) _end;
97
98/*
99 * This still seems to be needed... -- paulus
100 */
101struct screen_info screen_info = {
102 .orig_x = 0,
103 .orig_y = 25,
104 .orig_video_cols = 80,
105 .orig_video_lines = 25,
106 .orig_video_isVGA = 1,
107 .orig_video_points = 16
108};
109#if defined(CONFIG_FB_VGA16_MODULE)
110EXPORT_SYMBOL(screen_info);
111#endif
112
113/* Variables required to store legacy IO irq routing */
114int of_i8042_kbd_irq;
115EXPORT_SYMBOL_GPL(of_i8042_kbd_irq);
116int of_i8042_aux_irq;
117EXPORT_SYMBOL_GPL(of_i8042_aux_irq);
118
119#ifdef __DO_IRQ_CANON
120/* XXX should go elsewhere eventually */
121int ppc_do_canonicalize_irqs;
122EXPORT_SYMBOL(ppc_do_canonicalize_irqs);
123#endif
124
125#ifdef CONFIG_CRASH_CORE
126/* This keeps a track of which one is the crashing cpu. */
127int crashing_cpu = -1;
128#endif
129
130/* also used by kexec */
131void machine_shutdown(void)
132{
133 /*
134 * if fadump is active, cleanup the fadump registration before we
135 * shutdown.
136 */
137 fadump_cleanup();
138
139 if (ppc_md.machine_shutdown)
140 ppc_md.machine_shutdown();
141}
142
143static void machine_hang(void)
144{
145 pr_emerg("System Halted, OK to turn off power\n");
146 local_irq_disable();
147 while (1)
148 ;
149}
150
151void machine_restart(char *cmd)
152{
153 machine_shutdown();
154 if (ppc_md.restart)
155 ppc_md.restart(cmd);
156
157 smp_send_stop();
158
159 do_kernel_restart(cmd);
160 mdelay(1000);
161
162 machine_hang();
163}
164
165void machine_power_off(void)
166{
167 machine_shutdown();
168 if (pm_power_off)
169 pm_power_off();
170
171 smp_send_stop();
172 machine_hang();
173}
174/* Used by the G5 thermal driver */
175EXPORT_SYMBOL_GPL(machine_power_off);
176
177void (*pm_power_off)(void);
178EXPORT_SYMBOL_GPL(pm_power_off);
179
180void machine_halt(void)
181{
182 machine_shutdown();
183 if (ppc_md.halt)
184 ppc_md.halt();
185
186 smp_send_stop();
187 machine_hang();
188}
189
190#ifdef CONFIG_SMP
191DEFINE_PER_CPU(unsigned int, cpu_pvr);
192#endif
193
194static void show_cpuinfo_summary(struct seq_file *m)
195{
196 struct device_node *root;
197 const char *model = NULL;
198 unsigned long bogosum = 0;
199 int i;
200
201 if (IS_ENABLED(CONFIG_SMP) && IS_ENABLED(CONFIG_PPC32)) {
202 for_each_online_cpu(i)
203 bogosum += loops_per_jiffy;
204 seq_printf(m, "total bogomips\t: %lu.%02lu\n",
205 bogosum / (500000 / HZ), bogosum / (5000 / HZ) % 100);
206 }
207 seq_printf(m, "timebase\t: %lu\n", ppc_tb_freq);
208 if (ppc_md.name)
209 seq_printf(m, "platform\t: %s\n", ppc_md.name);
210 root = of_find_node_by_path("/");
211 if (root)
212 model = of_get_property(root, "model", NULL);
213 if (model)
214 seq_printf(m, "model\t\t: %s\n", model);
215 of_node_put(root);
216
217 if (ppc_md.show_cpuinfo != NULL)
218 ppc_md.show_cpuinfo(m);
219
220 /* Display the amount of memory */
221 if (IS_ENABLED(CONFIG_PPC32))
222 seq_printf(m, "Memory\t\t: %d MB\n",
223 (unsigned int)(total_memory / (1024 * 1024)));
224}
225
226static int show_cpuinfo(struct seq_file *m, void *v)
227{
228 unsigned long cpu_id = (unsigned long)v - 1;
229 unsigned int pvr;
230 unsigned long proc_freq;
231 unsigned short maj;
232 unsigned short min;
233
234#ifdef CONFIG_SMP
235 pvr = per_cpu(cpu_pvr, cpu_id);
236#else
237 pvr = mfspr(SPRN_PVR);
238#endif
239 maj = (pvr >> 8) & 0xFF;
240 min = pvr & 0xFF;
241
242 seq_printf(m, "processor\t: %lu\n", cpu_id);
243 seq_printf(m, "cpu\t\t: ");
244
245 if (cur_cpu_spec->pvr_mask && cur_cpu_spec->cpu_name)
246 seq_printf(m, "%s", cur_cpu_spec->cpu_name);
247 else
248 seq_printf(m, "unknown (%08x)", pvr);
249
250 if (cpu_has_feature(CPU_FTR_ALTIVEC))
251 seq_printf(m, ", altivec supported");
252
253 seq_printf(m, "\n");
254
255#ifdef CONFIG_TAU
256 if (cpu_has_feature(CPU_FTR_TAU)) {
257 if (IS_ENABLED(CONFIG_TAU_AVERAGE)) {
258 /* more straightforward, but potentially misleading */
259 seq_printf(m, "temperature \t: %u C (uncalibrated)\n",
260 cpu_temp(cpu_id));
261 } else {
262 /* show the actual temp sensor range */
263 u32 temp;
264 temp = cpu_temp_both(cpu_id);
265 seq_printf(m, "temperature \t: %u-%u C (uncalibrated)\n",
266 temp & 0xff, temp >> 16);
267 }
268 }
269#endif /* CONFIG_TAU */
270
271 /*
272 * Platforms that have variable clock rates, should implement
273 * the method ppc_md.get_proc_freq() that reports the clock
274 * rate of a given cpu. The rest can use ppc_proc_freq to
275 * report the clock rate that is same across all cpus.
276 */
277 if (ppc_md.get_proc_freq)
278 proc_freq = ppc_md.get_proc_freq(cpu_id);
279 else
280 proc_freq = ppc_proc_freq;
281
282 if (proc_freq)
283 seq_printf(m, "clock\t\t: %lu.%06luMHz\n",
284 proc_freq / 1000000, proc_freq % 1000000);
285
286 if (ppc_md.show_percpuinfo != NULL)
287 ppc_md.show_percpuinfo(m, cpu_id);
288
289 /* If we are a Freescale core do a simple check so
290 * we dont have to keep adding cases in the future */
291 if (PVR_VER(pvr) & 0x8000) {
292 switch (PVR_VER(pvr)) {
293 case 0x8000: /* 7441/7450/7451, Voyager */
294 case 0x8001: /* 7445/7455, Apollo 6 */
295 case 0x8002: /* 7447/7457, Apollo 7 */
296 case 0x8003: /* 7447A, Apollo 7 PM */
297 case 0x8004: /* 7448, Apollo 8 */
298 case 0x800c: /* 7410, Nitro */
299 maj = ((pvr >> 8) & 0xF);
300 min = PVR_MIN(pvr);
301 break;
302 default: /* e500/book-e */
303 maj = PVR_MAJ(pvr);
304 min = PVR_MIN(pvr);
305 break;
306 }
307 } else {
308 switch (PVR_VER(pvr)) {
309 case 0x0020: /* 403 family */
310 maj = PVR_MAJ(pvr) + 1;
311 min = PVR_MIN(pvr);
312 break;
313 case 0x1008: /* 740P/750P ?? */
314 maj = ((pvr >> 8) & 0xFF) - 1;
315 min = pvr & 0xFF;
316 break;
317 case 0x004e: /* POWER9 bits 12-15 give chip type */
318 maj = (pvr >> 8) & 0x0F;
319 min = pvr & 0xFF;
320 break;
321 default:
322 maj = (pvr >> 8) & 0xFF;
323 min = pvr & 0xFF;
324 break;
325 }
326 }
327
328 seq_printf(m, "revision\t: %hd.%hd (pvr %04x %04x)\n",
329 maj, min, PVR_VER(pvr), PVR_REV(pvr));
330
331 if (IS_ENABLED(CONFIG_PPC32))
332 seq_printf(m, "bogomips\t: %lu.%02lu\n", loops_per_jiffy / (500000 / HZ),
333 (loops_per_jiffy / (5000 / HZ)) % 100);
334
335 seq_printf(m, "\n");
336
337 /* If this is the last cpu, print the summary */
338 if (cpumask_next(cpu_id, cpu_online_mask) >= nr_cpu_ids)
339 show_cpuinfo_summary(m);
340
341 return 0;
342}
343
344static void *c_start(struct seq_file *m, loff_t *pos)
345{
346 if (*pos == 0) /* just in case, cpu 0 is not the first */
347 *pos = cpumask_first(cpu_online_mask);
348 else
349 *pos = cpumask_next(*pos - 1, cpu_online_mask);
350 if ((*pos) < nr_cpu_ids)
351 return (void *)(unsigned long)(*pos + 1);
352 return NULL;
353}
354
355static void *c_next(struct seq_file *m, void *v, loff_t *pos)
356{
357 (*pos)++;
358 return c_start(m, pos);
359}
360
361static void c_stop(struct seq_file *m, void *v)
362{
363}
364
365const struct seq_operations cpuinfo_op = {
366 .start = c_start,
367 .next = c_next,
368 .stop = c_stop,
369 .show = show_cpuinfo,
370};
371
372void __init check_for_initrd(void)
373{
374#ifdef CONFIG_BLK_DEV_INITRD
375 DBG(" -> check_for_initrd() initrd_start=0x%lx initrd_end=0x%lx\n",
376 initrd_start, initrd_end);
377
378 /* If we were passed an initrd, set the ROOT_DEV properly if the values
379 * look sensible. If not, clear initrd reference.
380 */
381 if (is_kernel_addr(initrd_start) && is_kernel_addr(initrd_end) &&
382 initrd_end > initrd_start)
383 ROOT_DEV = Root_RAM0;
384 else
385 initrd_start = initrd_end = 0;
386
387 if (initrd_start)
388 pr_info("Found initrd at 0x%lx:0x%lx\n", initrd_start, initrd_end);
389
390 DBG(" <- check_for_initrd()\n");
391#endif /* CONFIG_BLK_DEV_INITRD */
392}
393
394#ifdef CONFIG_SMP
395
396int threads_per_core, threads_per_subcore, threads_shift __read_mostly;
397cpumask_t threads_core_mask __read_mostly;
398EXPORT_SYMBOL_GPL(threads_per_core);
399EXPORT_SYMBOL_GPL(threads_per_subcore);
400EXPORT_SYMBOL_GPL(threads_shift);
401EXPORT_SYMBOL_GPL(threads_core_mask);
402
403static void __init cpu_init_thread_core_maps(int tpc)
404{
405 int i;
406
407 threads_per_core = tpc;
408 threads_per_subcore = tpc;
409 cpumask_clear(&threads_core_mask);
410
411 /* This implementation only supports power of 2 number of threads
412 * for simplicity and performance
413 */
414 threads_shift = ilog2(tpc);
415 BUG_ON(tpc != (1 << threads_shift));
416
417 for (i = 0; i < tpc; i++)
418 cpumask_set_cpu(i, &threads_core_mask);
419
420 printk(KERN_INFO "CPU maps initialized for %d thread%s per core\n",
421 tpc, tpc > 1 ? "s" : "");
422 printk(KERN_DEBUG " (thread shift is %d)\n", threads_shift);
423}
424
425
426u32 *cpu_to_phys_id = NULL;
427
428/**
429 * setup_cpu_maps - initialize the following cpu maps:
430 * cpu_possible_mask
431 * cpu_present_mask
432 *
433 * Having the possible map set up early allows us to restrict allocations
434 * of things like irqstacks to nr_cpu_ids rather than NR_CPUS.
435 *
436 * We do not initialize the online map here; cpus set their own bits in
437 * cpu_online_mask as they come up.
438 *
439 * This function is valid only for Open Firmware systems. finish_device_tree
440 * must be called before using this.
441 *
442 * While we're here, we may as well set the "physical" cpu ids in the paca.
443 *
444 * NOTE: This must match the parsing done in early_init_dt_scan_cpus.
445 */
446void __init smp_setup_cpu_maps(void)
447{
448 struct device_node *dn;
449 int cpu = 0;
450 int nthreads = 1;
451
452 DBG("smp_setup_cpu_maps()\n");
453
454 cpu_to_phys_id = memblock_alloc(nr_cpu_ids * sizeof(u32),
455 __alignof__(u32));
456 if (!cpu_to_phys_id)
457 panic("%s: Failed to allocate %zu bytes align=0x%zx\n",
458 __func__, nr_cpu_ids * sizeof(u32), __alignof__(u32));
459
460 for_each_node_by_type(dn, "cpu") {
461 const __be32 *intserv;
462 __be32 cpu_be;
463 int j, len;
464
465 DBG(" * %pOF...\n", dn);
466
467 intserv = of_get_property(dn, "ibm,ppc-interrupt-server#s",
468 &len);
469 if (intserv) {
470 DBG(" ibm,ppc-interrupt-server#s -> %d threads\n",
471 nthreads);
472 } else {
473 DBG(" no ibm,ppc-interrupt-server#s -> 1 thread\n");
474 intserv = of_get_property(dn, "reg", &len);
475 if (!intserv) {
476 cpu_be = cpu_to_be32(cpu);
477 /* XXX: what is this? uninitialized?? */
478 intserv = &cpu_be; /* assume logical == phys */
479 len = 4;
480 }
481 }
482
483 nthreads = len / sizeof(int);
484
485 for (j = 0; j < nthreads && cpu < nr_cpu_ids; j++) {
486 bool avail;
487
488 DBG(" thread %d -> cpu %d (hard id %d)\n",
489 j, cpu, be32_to_cpu(intserv[j]));
490
491 avail = of_device_is_available(dn);
492 if (!avail)
493 avail = !of_property_match_string(dn,
494 "enable-method", "spin-table");
495
496 set_cpu_present(cpu, avail);
497 set_cpu_possible(cpu, true);
498 cpu_to_phys_id[cpu] = be32_to_cpu(intserv[j]);
499 cpu++;
500 }
501
502 if (cpu >= nr_cpu_ids) {
503 of_node_put(dn);
504 break;
505 }
506 }
507
508 /* If no SMT supported, nthreads is forced to 1 */
509 if (!cpu_has_feature(CPU_FTR_SMT)) {
510 DBG(" SMT disabled ! nthreads forced to 1\n");
511 nthreads = 1;
512 }
513
514#ifdef CONFIG_PPC64
515 /*
516 * On pSeries LPAR, we need to know how many cpus
517 * could possibly be added to this partition.
518 */
519 if (firmware_has_feature(FW_FEATURE_LPAR) &&
520 (dn = of_find_node_by_path("/rtas"))) {
521 int num_addr_cell, num_size_cell, maxcpus;
522 const __be32 *ireg;
523
524 num_addr_cell = of_n_addr_cells(dn);
525 num_size_cell = of_n_size_cells(dn);
526
527 ireg = of_get_property(dn, "ibm,lrdr-capacity", NULL);
528
529 if (!ireg)
530 goto out;
531
532 maxcpus = be32_to_cpup(ireg + num_addr_cell + num_size_cell);
533
534 /* Double maxcpus for processors which have SMT capability */
535 if (cpu_has_feature(CPU_FTR_SMT))
536 maxcpus *= nthreads;
537
538 if (maxcpus > nr_cpu_ids) {
539 printk(KERN_WARNING
540 "Partition configured for %d cpus, "
541 "operating system maximum is %u.\n",
542 maxcpus, nr_cpu_ids);
543 maxcpus = nr_cpu_ids;
544 } else
545 printk(KERN_INFO "Partition configured for %d cpus.\n",
546 maxcpus);
547
548 for (cpu = 0; cpu < maxcpus; cpu++)
549 set_cpu_possible(cpu, true);
550 out:
551 of_node_put(dn);
552 }
553 vdso_data->processorCount = num_present_cpus();
554#endif /* CONFIG_PPC64 */
555
556 /* Initialize CPU <=> thread mapping/
557 *
558 * WARNING: We assume that the number of threads is the same for
559 * every CPU in the system. If that is not the case, then some code
560 * here will have to be reworked
561 */
562 cpu_init_thread_core_maps(nthreads);
563
564 /* Now that possible cpus are set, set nr_cpu_ids for later use */
565 setup_nr_cpu_ids();
566
567 free_unused_pacas();
568}
569#endif /* CONFIG_SMP */
570
571#ifdef CONFIG_PCSPKR_PLATFORM
572static __init int add_pcspkr(void)
573{
574 struct device_node *np;
575 struct platform_device *pd;
576 int ret;
577
578 np = of_find_compatible_node(NULL, NULL, "pnpPNP,100");
579 of_node_put(np);
580 if (!np)
581 return -ENODEV;
582
583 pd = platform_device_alloc("pcspkr", -1);
584 if (!pd)
585 return -ENOMEM;
586
587 ret = platform_device_add(pd);
588 if (ret)
589 platform_device_put(pd);
590
591 return ret;
592}
593device_initcall(add_pcspkr);
594#endif /* CONFIG_PCSPKR_PLATFORM */
595
596void probe_machine(void)
597{
598 extern struct machdep_calls __machine_desc_start;
599 extern struct machdep_calls __machine_desc_end;
600 unsigned int i;
601
602 /*
603 * Iterate all ppc_md structures until we find the proper
604 * one for the current machine type
605 */
606 DBG("Probing machine type ...\n");
607
608 /*
609 * Check ppc_md is empty, if not we have a bug, ie, we setup an
610 * entry before probe_machine() which will be overwritten
611 */
612 for (i = 0; i < (sizeof(ppc_md) / sizeof(void *)); i++) {
613 if (((void **)&ppc_md)[i]) {
614 printk(KERN_ERR "Entry %d in ppc_md non empty before"
615 " machine probe !\n", i);
616 }
617 }
618
619 for (machine_id = &__machine_desc_start;
620 machine_id < &__machine_desc_end;
621 machine_id++) {
622 DBG(" %s ...", machine_id->name);
623 memcpy(&ppc_md, machine_id, sizeof(struct machdep_calls));
624 if (ppc_md.probe()) {
625 DBG(" match !\n");
626 break;
627 }
628 DBG("\n");
629 }
630 /* What can we do if we didn't find ? */
631 if (machine_id >= &__machine_desc_end) {
632 pr_err("No suitable machine description found !\n");
633 for (;;);
634 }
635
636 printk(KERN_INFO "Using %s machine description\n", ppc_md.name);
637}
638
639/* Match a class of boards, not a specific device configuration. */
640int check_legacy_ioport(unsigned long base_port)
641{
642 struct device_node *parent, *np = NULL;
643 int ret = -ENODEV;
644
645 switch(base_port) {
646 case I8042_DATA_REG:
647 if (!(np = of_find_compatible_node(NULL, NULL, "pnpPNP,303")))
648 np = of_find_compatible_node(NULL, NULL, "pnpPNP,f03");
649 if (np) {
650 parent = of_get_parent(np);
651
652 of_i8042_kbd_irq = irq_of_parse_and_map(parent, 0);
653 if (!of_i8042_kbd_irq)
654 of_i8042_kbd_irq = 1;
655
656 of_i8042_aux_irq = irq_of_parse_and_map(parent, 1);
657 if (!of_i8042_aux_irq)
658 of_i8042_aux_irq = 12;
659
660 of_node_put(np);
661 np = parent;
662 break;
663 }
664 np = of_find_node_by_type(NULL, "8042");
665 /* Pegasos has no device_type on its 8042 node, look for the
666 * name instead */
667 if (!np)
668 np = of_find_node_by_name(NULL, "8042");
669 if (np) {
670 of_i8042_kbd_irq = 1;
671 of_i8042_aux_irq = 12;
672 }
673 break;
674 case FDC_BASE: /* FDC1 */
675 np = of_find_node_by_type(NULL, "fdc");
676 break;
677 default:
678 /* ipmi is supposed to fail here */
679 break;
680 }
681 if (!np)
682 return ret;
683 parent = of_get_parent(np);
684 if (parent) {
685 if (of_node_is_type(parent, "isa"))
686 ret = 0;
687 of_node_put(parent);
688 }
689 of_node_put(np);
690 return ret;
691}
692EXPORT_SYMBOL(check_legacy_ioport);
693
694static int ppc_panic_event(struct notifier_block *this,
695 unsigned long event, void *ptr)
696{
697 /*
698 * panic does a local_irq_disable, but we really
699 * want interrupts to be hard disabled.
700 */
701 hard_irq_disable();
702
703 /*
704 * If firmware-assisted dump has been registered then trigger
705 * firmware-assisted dump and let firmware handle everything else.
706 */
707 crash_fadump(NULL, ptr);
708 if (ppc_md.panic)
709 ppc_md.panic(ptr); /* May not return */
710 return NOTIFY_DONE;
711}
712
713static struct notifier_block ppc_panic_block = {
714 .notifier_call = ppc_panic_event,
715 .priority = INT_MIN /* may not return; must be done last */
716};
717
718void __init setup_panic(void)
719{
720 /* PPC64 always does a hard irq disable in its panic handler */
721 if (!IS_ENABLED(CONFIG_PPC64) && !ppc_md.panic)
722 return;
723 atomic_notifier_chain_register(&panic_notifier_list, &ppc_panic_block);
724}
725
726#ifdef CONFIG_CHECK_CACHE_COHERENCY
727/*
728 * For platforms that have configurable cache-coherency. This function
729 * checks that the cache coherency setting of the kernel matches the setting
730 * left by the firmware, as indicated in the device tree. Since a mismatch
731 * will eventually result in DMA failures, we print * and error and call
732 * BUG() in that case.
733 */
734
735#define KERNEL_COHERENCY (!IS_ENABLED(CONFIG_NOT_COHERENT_CACHE))
736
737static int __init check_cache_coherency(void)
738{
739 struct device_node *np;
740 const void *prop;
741 bool devtree_coherency;
742
743 np = of_find_node_by_path("/");
744 prop = of_get_property(np, "coherency-off", NULL);
745 of_node_put(np);
746
747 devtree_coherency = prop ? false : true;
748
749 if (devtree_coherency != KERNEL_COHERENCY) {
750 printk(KERN_ERR
751 "kernel coherency:%s != device tree_coherency:%s\n",
752 KERNEL_COHERENCY ? "on" : "off",
753 devtree_coherency ? "on" : "off");
754 BUG();
755 }
756
757 return 0;
758}
759
760late_initcall(check_cache_coherency);
761#endif /* CONFIG_CHECK_CACHE_COHERENCY */
762
763#ifdef CONFIG_DEBUG_FS
764struct dentry *powerpc_debugfs_root;
765EXPORT_SYMBOL(powerpc_debugfs_root);
766
767static int powerpc_debugfs_init(void)
768{
769 powerpc_debugfs_root = debugfs_create_dir("powerpc", NULL);
770
771 return powerpc_debugfs_root == NULL;
772}
773arch_initcall(powerpc_debugfs_init);
774#endif
775
776void ppc_printk_progress(char *s, unsigned short hex)
777{
778 pr_info("%s\n", s);
779}
780
781static __init void print_system_info(void)
782{
783 pr_info("-----------------------------------------------------\n");
784 pr_info("phys_mem_size = 0x%llx\n",
785 (unsigned long long)memblock_phys_mem_size());
786
787 pr_info("dcache_bsize = 0x%x\n", dcache_bsize);
788 pr_info("icache_bsize = 0x%x\n", icache_bsize);
789 if (ucache_bsize != 0)
790 pr_info("ucache_bsize = 0x%x\n", ucache_bsize);
791
792 pr_info("cpu_features = 0x%016lx\n", cur_cpu_spec->cpu_features);
793 pr_info(" possible = 0x%016lx\n",
794 (unsigned long)CPU_FTRS_POSSIBLE);
795 pr_info(" always = 0x%016lx\n",
796 (unsigned long)CPU_FTRS_ALWAYS);
797 pr_info("cpu_user_features = 0x%08x 0x%08x\n",
798 cur_cpu_spec->cpu_user_features,
799 cur_cpu_spec->cpu_user_features2);
800 pr_info("mmu_features = 0x%08x\n", cur_cpu_spec->mmu_features);
801#ifdef CONFIG_PPC64
802 pr_info("firmware_features = 0x%016lx\n", powerpc_firmware_features);
803#ifdef CONFIG_PPC_BOOK3S
804 pr_info("vmalloc start = 0x%lx\n", KERN_VIRT_START);
805 pr_info("IO start = 0x%lx\n", KERN_IO_START);
806 pr_info("vmemmap start = 0x%lx\n", (unsigned long)vmemmap);
807#endif
808#endif
809
810 if (!early_radix_enabled())
811 print_system_hash_info();
812
813 if (PHYSICAL_START > 0)
814 pr_info("physical_start = 0x%llx\n",
815 (unsigned long long)PHYSICAL_START);
816 pr_info("-----------------------------------------------------\n");
817}
818
819#ifdef CONFIG_SMP
820static void smp_setup_pacas(void)
821{
822 int cpu;
823
824 for_each_possible_cpu(cpu) {
825 if (cpu == smp_processor_id())
826 continue;
827 allocate_paca(cpu);
828 set_hard_smp_processor_id(cpu, cpu_to_phys_id[cpu]);
829 }
830
831 memblock_free(__pa(cpu_to_phys_id), nr_cpu_ids * sizeof(u32));
832 cpu_to_phys_id = NULL;
833}
834#endif
835
836/*
837 * Called into from start_kernel this initializes memblock, which is used
838 * to manage page allocation until mem_init is called.
839 */
840void __init setup_arch(char **cmdline_p)
841{
842 kasan_init();
843
844 *cmdline_p = boot_command_line;
845
846 /* Set a half-reasonable default so udelay does something sensible */
847 loops_per_jiffy = 500000000 / HZ;
848
849 /* Unflatten the device-tree passed by prom_init or kexec */
850 unflatten_device_tree();
851
852 /*
853 * Initialize cache line/block info from device-tree (on ppc64) or
854 * just cputable (on ppc32).
855 */
856 initialize_cache_info();
857
858 /* Initialize RTAS if available. */
859 rtas_initialize();
860
861 /* Check if we have an initrd provided via the device-tree. */
862 check_for_initrd();
863
864 /* Probe the machine type, establish ppc_md. */
865 probe_machine();
866
867 /* Setup panic notifier if requested by the platform. */
868 setup_panic();
869
870 /*
871 * Configure ppc_md.power_save (ppc32 only, 64-bit machines do
872 * it from their respective probe() function.
873 */
874 setup_power_save();
875
876 /* Discover standard serial ports. */
877 find_legacy_serial_ports();
878
879 /* Register early console with the printk subsystem. */
880 register_early_udbg_console();
881
882 /* Setup the various CPU maps based on the device-tree. */
883 smp_setup_cpu_maps();
884
885 /* Initialize xmon. */
886 xmon_setup();
887
888 /* Check the SMT related command line arguments (ppc64). */
889 check_smt_enabled();
890
891 /* Parse memory topology */
892 mem_topology_setup();
893
894 /*
895 * Release secondary cpus out of their spinloops at 0x60 now that
896 * we can map physical -> logical CPU ids.
897 *
898 * Freescale Book3e parts spin in a loop provided by firmware,
899 * so smp_release_cpus() does nothing for them.
900 */
901#ifdef CONFIG_SMP
902 smp_setup_pacas();
903
904 /* On BookE, setup per-core TLB data structures. */
905 setup_tlb_core_data();
906
907 smp_release_cpus();
908#endif
909
910 /* Print various info about the machine that has been gathered so far. */
911 print_system_info();
912
913 /* Reserve large chunks of memory for use by CMA for KVM. */
914 kvm_cma_reserve();
915
916 klp_init_thread_info(&init_task);
917
918 init_mm.start_code = (unsigned long)_stext;
919 init_mm.end_code = (unsigned long) _etext;
920 init_mm.end_data = (unsigned long) _edata;
921 init_mm.brk = klimit;
922
923 mm_iommu_init(&init_mm);
924 irqstack_early_init();
925 exc_lvl_early_init();
926 emergency_stack_init();
927
928 initmem_init();
929
930 early_memtest(min_low_pfn << PAGE_SHIFT, max_low_pfn << PAGE_SHIFT);
931
932 if (IS_ENABLED(CONFIG_DUMMY_CONSOLE))
933 conswitchp = &dummy_con;
934
935 if (ppc_md.setup_arch)
936 ppc_md.setup_arch();
937
938 setup_barrier_nospec();
939 setup_spectre_v2();
940
941 paging_init();
942
943 /* Initialize the MMU context management stuff. */
944 mmu_context_init();
945
946 /* Interrupt code needs to be 64K-aligned. */
947 if (IS_ENABLED(CONFIG_PPC64) && (unsigned long)_stext & 0xffff)
948 panic("Kernelbase not 64K-aligned (0x%lx)!\n",
949 (unsigned long)_stext);
950}